can: ctucanfd: ctucan_interrupt(): fix typo

This patch fixes the typo "poniter" -> "pointer" in the kerneldoc of
ctucan_interrupt().

Link: https://lore.kernel.org/all/20220628083204.881311-1-mkl@pengutronix.de
Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Cc: Ondrej Ille <ondrej.ille@gmail.com>
Cc: Martin Jerabek <martin.jerabek01@gmail.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge branch 'can327-CAN-ldisc-driver-for-ELM327-based-OBD-II-adapters'

Max Staudt says:
====================
This is the can327 driver. It does a surprisingly good job at turning
ELM327 based OBD-II interfaces into cheap CAN interfaces for simple
homebrew projects.

Please see the included documentation for details and limitations:
Documentation/networking/device_drivers/can/can327.rst
====================

Link: https://lore.kernel.org/all/20220618195031.10975-1-max@enpas.org/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: can327: CAN/ldisc driver for ELM327 based OBD-II adapters

This is the can327 driver. It does a surprisingly good job at turning
ELM327 based OBD-II interfaces into cheap CAN interfaces for simple
homebrew projects.

Please see the included documentation for details and limitations:
Documentation/networking/device_drivers/can/can327.rst

Link: https://lore.kernel.org/all/20220618195031.10975-1-max@enpas.org
Signed-off-by: Max Staudt <max@enpas.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
[mkl: minor coding style improvements]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

tty: Add N_CAN327 line discipline ID for ELM327 based CAN driver

The actual driver will be added via the CAN tree.

Link: https://lore.kernel.org/all/20220618180134.9890-1-max@enpas.org
Link: https://lore.kernel.org/all/Yrm9Ezlw1dLmIxyS@kroah.com
Signed-off-by: Max Staudt <max@enpas.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

ipmr: fix a lockdep splat in ipmr_rtm_dumplink()

vif_dev_read() should be used from RCU protected sections only.

ipmr_rtm_dumplink() is holding RTNL, so the data structures
can not be changed.

syzbot reported:

net/ipv4/ipmr.c:84 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz-executor.4/3068:

stack backtrace:
CPU: 1 PID: 3068 Comm: syz-executor.4 Not tainted 5.19.0-rc3-syzkaller-00565-g5d04b0b634bb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
vif_dev_read net/ipv4/ipmr.c:84 [inline]
vif_dev_read net/ipv4/ipmr.c:82 [inline]
ipmr_fill_vif net/ipv4/ipmr.c:2756 [inline]
ipmr_rtm_dumplink+0x1343/0x18c0 net/ipv4/ipmr.c:2866
netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275
__netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380
netlink_dump_start include/linux/netlink.h:245 [inline]
rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x334/0x810 net/socket.c:2489
___sys_sendmsg+0xf3/0x170 net/socket.c:2543
__sys_sendmmsg+0x195/0x470 net/socket.c:2629
__do_sys_sendmmsg net/socket.c:2658 [inline]
__se_sys_sendmmsg net/socket.c:2655 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2655
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fefd8a89109
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fefd9ca6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00007fefd8b9bf60 RCX: 00007fefd8a89109
RDX: 0000000004924b68 RSI: 0000000020000140 RDI: 0000000000000003
RBP: 00007fefd8ae305d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc346febaf R14: 00007fefd9ca6300 R15: 0000000000022000
</TASK>

Fixes: ebc3197963fc ("ipmr: add rcu protection over (struct vif_device)->dev")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc:falcon: fix repeated words in comments

Delete the redundant word 'in'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: fix repeated words in comments

Delete the redundant word 'set'.
Delete the redundant word 'a'.
Delete the redundant word 'in'.
Found the same error as before.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Print hashed skb addresses for all net and qdisc events

The following commits added support for printing the real address-
65875073eddd ("net: use %px to print skb address in trace_netif_receive_skb")
70713dddf3d2 ("net_sched: introduce tracepoint trace_qdisc_enqueue()")
851f36e40962 ("net_sched: use %px to print skb address in trace_qdisc_dequeue()")

However, tracing the packet traversal shows a mix of hashes and real
addresses. Pasting a sample trace for reference-

ping-14249   [002] .....  3424.046612: netif_rx_entry: dev=lo napi_id=0x3 queue_mapping=0
skbaddr=00000000dcbed83e vlan_tagged=0 vlan_proto=0x0000 vlan_tci=0x0000 protocol=0x0800
ip_summed=0 hash=0x00000000 l4_hash=0 len=84 data_len=0 truesize=768 mac_header_valid=1
mac_header=-14 nr_frags=0 gso_size=0 gso_type=0x0
ping-14249   [002] .....  3424.046615: netif_rx: dev=lo skbaddr=ffffff888e5d1000 len=84

Switch the trace print formats to %p for all the events to have a
consistent format of printing the hashed addresses in all cases.

Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-5.20-20220625' of git://git./linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2022-06-25

this is a pull request of 22 patches for net-next/master.

The first 2 patches target the xilinx driver. Srinivas Neeli's patch
adds Transmitter Delay Compensation (TDC) support, a patch by me fixes
a typo.

The next patch is by me and fixes a typo in the m_can driver.

Another patch by me allows the configuration of fixed bit rates
without need for do_set_bittiming callback.

The following 7 patches are by Vincent Mailhol and refactor the
can-dev module and Kbuild, de-inline the can_dropped_invalid_skb()
function, which has grown over the time, and drop outgoing skbs if the
controller is in listen only mode.

Max Staudt's patch fixes a reference in the networking/can.rst
documentation.

Vincent Mailhol provides 2 patches with cleanups for the etas_es58x
driver.

Conor Dooley adds bindings for the mpfs-can to the PolarFire SoC dtsi.

Another patch by me allows the configuration of fixed data bit rates
without need for do_set_data_bittiming callback.

The last 5 patches are by Frank Jungclaus. They prepare the esd_usb
driver to add support for the the CAN-USB/3 device in a later series.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'Renesas-rz-n1'

Clément Léger says:

====================
net: add support for Renesas RZ/N1 ethernet su

The Renesas RZ/N1 SoCs features an ethernet subsystem which contains
(most notably) a switch, two GMACs, and a MII converter [1]. This
series adds support for the switch and the MII converter.

The MII converter present on this SoC has been represented as a PCS
which sit between the MACs and the PHY. This PCS driver is probed from
the device-tree since it requires to be configured. Indeed the MII
converter also contains the registers that are handling the muxing of
ports (Switch, MAC, HSR, RTOS, etc) internally to the SoC.

The switch driver is based on DSA and exposes 4 ports + 1 CPU
management port. It include basic bridging support as well as FDB and
statistics support.

Link: [1] https://www.renesas.com/us/en/document/mah/rzn1d-group-rzn1s-group-rzn1l-group-users-manual-r-engine-and-ethernet-peripherals

-----
Changes in V9:
- Cover letter:
  - Remove comment about RZN1 patches that are now in the master branch.
- Commits:
  - Add Vladimir Oltean Reviewed-by
- PCS:
  - Add "Depends on OF" for PCS_RZN1_MIIC due to error found by intel
    kernel test robot <lkp@intel.com>.
  - Check return value of of_property_read_u32() for
    "renesas,miic-switch-portin" property before setting conf.
  - Return miic_parse_dt() return value in miic_probe() on error
- Switch:
  - Add "Depends on OF" for NET_DSA_RZN1_A5PSW due to errors found by
    intel kernel test robot <lkp@intel.com>.
- DT:
  - Add spaces between switch port and '{'
====================

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: add Renesas RZ/N1 switch related driver entry

After contributing the drivers, volunteer for maintenance and add
myself as the maintainer for Renesas RZ/N1 switch related drivers.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ARM: dts: r9a06g032-rzn1d400-db: add switch description

Add description for the switch, GMAC2 and MII converter. With these
definitions, the switch port 0 and 1 (MII port 5 and 4) are working on
RZ/N1D-DB board.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ARM: dts: r9a06g032: describe switch

Add description of the switch that is present on the RZ/N1 SoC. This
description includes ethernet-ports description for all the ports that
are present on the switch along with their connection to the MII
converter ports and to the GMAC for the CPU port.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ARM: dts: r9a06g032: describe GMAC2

RZ/N1 SoC includes two MAC named GMACx that are compatible with the
"snps,dwmac" driver. GMAC1 is connected directly to the MII converter
port 1. GMAC2 however can be used as the MAC for the switch CPU
management port or can be muxed to be connected directly to the MII
converter port 2. This commit add description for the GMAC2 which will
be used by the switch description.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ARM: dts: r9a06g032: describe MII converter

Add the MII converter node which describes the MII converter that is
present on the RZ/N1 SoC.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: snps,dwmac: add "renesas,rzn1" compatible

Add "renesas,rzn1-gmac" and "renesas,r9a06g032-gmac" compatible strings.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: snps,dwmac: add "power-domains" property

Since the stmmac driver already uses pm_runtime*() functions, describe
"power-domains" property in the binding.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: rzn1-a5psw: add FDB support

This commits add forwarding database support to the driver. It
implements fdb_add(), fdb_del() and fdb_dump().

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: rzn1-a5psw: add statistics support

Add statistics support to the rzn1-a5psw driver by implementing the
following dsa_switch_ops callbacks:
- get_sset_count()
- get_strings()
- get_ethtool_stats()
- get_eth_mac_stats()
- get_eth_ctrl_stats()
- get_rmon_stats()

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver

Add Renesas RZ/N1 advanced 5 port switch driver. This switch handles 5
ports including 1 CPU management port. A MDIO bus is also exposed by
this switch and allows to communicate with PHYs connected to the ports.
Each switch port (except for the CPU management ports) is connected to
the MII converter.

This driver includes basic bridging support, more support will be added
later (vlan, etc).

Suggested-by: Jean-Pierre Geslin <jean-pierre.geslin@non.se.com>
Suggested-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: dsa: add bindings for Renesas RZ/N1 Advanced 5 port switch

Add bindings for Renesas RZ/N1 Advanced 5 port switch. This switch is
present on Renesas RZ/N1 SoC and was probably provided by MoreThanIP.
This company does not exists anymore and has been bought by Synopsys.
Since this IP can't be find anymore in the Synospsy portfolio, lets use
Renesas as the vendor compatible for this IP.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: pcs: add Renesas MII converter driver

Add a PCS driver for the MII converter that is present on the Renesas
RZ/N1 SoC. This MII converter is reponsible for converting MII to
RMII/RGMII or act as a MII pass-trough. Exposing it as a PCS allows to
reuse it in both the switch driver and the stmmac driver. Currently,
this driver only allows the PCS to be used by the dual Cortex-A7
subsystem since the register locking system is not used.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter

This MII converter can be found on the RZ/N1 processor family. The MII
converter ports are declared as subnodes which are then referenced by
users of the PCS driver such as the switch.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: add Renesas RZ/N1 switch tag driver

The switch that is present on the Renesas RZ/N1 SoC uses a specific
VLAN value followed by 6 bytes which contains forwarding configuration.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: add support for ethtool get_rmon_stats()

Add support to allow dsa drivers to specify the .get_rmon_stats()
operation.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: allow port_bridge_join() to override extack message

Some drivers might report that they are unable to bridge ports by
returning -EOPNOTSUPP, but still wants to override extack message.
In order to do so, in dsa_slave_changeupper(), if port_bridge_join()
returns -EOPNOTSUPP, check if extack message is set and if so, do not
override it.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'preparation-for-supporting-esd-CAN-USB-3'

Frank Jungclaus says:
====================
All following 5 patches must be seen as preparation for adding support
of the newly available esd CAN-USB/3 to esd_usb2.c.

After having gained some confidence and experience on sending patches
to linux-can@vger.kernel.org, I'll again submit the code changes for
CAN-USB/3 support as step #2.
====================

Link: https://lore.kernel.org/all/20220624190517.2299701-1-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can/esd_usb: Update to copyright, M_AUTHOR and M_DESCRIPTION

- Brought the copyright notice up to date
- Also regarding the changed company name from
esd electronic system design gmbh to esd electronics gmbh
- Using socketcan@esd.eu as a generic mail address for matthias who
left esd 6 years before
- Added a second MODULE_AUTHOR() for Frank Jungclaus

Link: https://lore.kernel.org/all/20220624190517.2299701-6-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can/esd_usb: Fixed some checkpatch.pl warnings

Link: https://lore.kernel.org/all/20220624190517.2299701-5-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can/esd_usb: Rename all terms USB2 to USB

Each occurrence of the term "usb2" within variables, function names,
comments, etc. is changed to "usb" where it is shared for all
esd CAN/USB devices.

Link: https://lore.kernel.org/all/20220624190517.2299701-4-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can/esd_usb: Add an entry to the MAINTAINERS file

As suggested by Marc, I added an entry for ESD CAN/USB Drivers
to the MAINTAINERS file

Link: https://lore.kernel.org/all/20220624190517.2299701-3-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can/esd_usb2: Rename esd_usb2.c to esd_usb.c

As suggested by Vincent, renaming of esd_usb2.c to esd_usb.c
and according to that, adaption of Kconfig and Makfile, too.

Link: https://lore.kernel.org/all/20220624190517.2299701-2-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

net: pcs: xpcs: depends on PHYLINK in Kconfig

This is yet another attempt at fixing:

>> ERROR: modpost: "phylink_mii_c22_pcs_encode_advertisement" [drivers/net/pcs/pcs_xpcs.ko] undefined!
>> ERROR: modpost: "phylink_mii_c22_pcs_decode_state" [drivers/net/pcs/pcs_xpcs.ko] undefined!

Switch XPCS to be invisible, as Russell points out it's
"selected" by its consumers. Drop the dependency on MDIO_BUS
as "depends" is meaningless on "selected" symbols.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: b47aec885bcd ("net: pcs: xpcs: add CL37 1000BASE-X AN support")
Link: https://lore.kernel.org/netdev/20220620201915.1195280-1-kuba@kernel.org/
Link: https://lore.kernel.org/r/20220622083521.0de3ea5c@kernel.org/
Link: https://lore.kernel.org/r/20220623202933.2341938-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

raw: fix a typo in raw_icmp_error()

I accidentally broke IPv4 traceroute, by swapping iph->saddr
and iph->daddr.

Probably because raw_icmp_error() and raw_v4_input()
use different order for iph->saddr and iph->daddr.

Fixes: ba44f8182ec2 ("raw: use more conventional iterators")
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220623193540.2851799-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

usbnet: Fix linkwatch use-after-free on disconnect

usbnet uses the work usbnet_deferred_kevent() to perform tasks which may
sleep.  On disconnect, completion of the work was originally awaited in
->ndo_stop().  But in 2003, that was moved to ->disconnect() by historic
commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock":

  https://git.kernel.org/tglx/history/c/0f138bbfd83c

The change was made because back then, the kernel's workqueue
implementation did not allow waiting for a single work.  One had to wait
for completion of *all* work by calling flush_scheduled_work(), and that
could deadlock when waiting for usbnet_deferred_kevent() with rtnl_mutex
held in ->ndo_stop().

The commit solved one problem but created another:  It causes a
use-after-free in USB Ethernet drivers aqc111.c, asix_devices.c,
ax88179_178a.c, ch9200.c and smsc75xx.c:

* If the drivers receive a link change interrupt immediately before
  disconnect, they raise EVENT_LINK_RESET in their (non-sleepable)
  ->status() callback and schedule usbnet_deferred_kevent().
* usbnet_deferred_kevent() invokes the driver's ->link_reset() callback,
  which calls netif_carrier_{on,off}().
* That in turn schedules the work linkwatch_event().

Because usbnet_deferred_kevent() is awaited after unregister_netdev(),
netif_carrier_{on,off}() may operate on an unregistered netdev and
linkwatch_event() may run after free_netdev(), causing a use-after-free.

In 2010, usbnet was changed to only wait for a single instance of
usbnet_deferred_kevent() instead of *all* work by commit 23f333a2bfaf
("drivers/net: don't use flush_scheduled_work()").

Unfortunately the commit neglected to move the wait back to
->ndo_stop().  Rectify that omission at long last.

Reported-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/netdev/CAG48ez0MHBbENX5gCdHAUXZ7h7s20LnepBF-pa5M=7Bi-jZrEA@mail.gmail.com/
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/netdev/20220315113841.GA22337@pengutronix.de/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/d1c87ebe9fc502bffcd1576e238d685ad08321e4.1655987888.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

i40e: read the XDP program once per NAPI

Similar to how it's done in the ice driver since 'eb087cd82864 ("ice:
propagate xdp_ring onto rx_ring")', read the XDP program once per NAPI
instead of once per descriptor cleaned. I measured an improvement in
throughput of 2% for the AF_XDP xdpsock l2fwd benchmark for zero copy mode
and 1% for copy mode.

Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Link: https://lore.kernel.org/r/20220623100852.7867-1-ciara.loftus@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sfc: siena: fix repeated words in comments

Delete the redundant word 'set'.
Delete the redundant word 'a'.
Delete the redundant word 'in'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220623043115.60482-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: helper function skb_len_add

Move the len fields manipulation in the skbs to a helper function.
There is a comment specifically requesting this and there are several
other areas in the code displaying the same pattern which can be
refactored.
This improves code readability.

Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Link: https://lore.kernel.org/r/20220622160853.GA6478@debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tc-testing: gitignore, delete plugins directory

when we modfying kernel, commit it to our environment building. we find a error
that is "tools/testing/selftests/tc-testing/plugins" failed: No such file or directory"

we find plugins directory is ignored in
"tools/testing/selftests/tc-testing/.gitignore", but the plugins directory
is need in "tools/testing/selftests/tc-testing/Makefile"

Signed-off-by: liujing <liujing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220622121237.5832-1-liujing@cmss.chinamobile.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/funeth: Support UDP segmentation offload

Handle skbs with SKB_GSO_UDP_L4, advertise the offload in features, and
add an ethtool counter for it. Small change to existing TSO code due to
UDP's different header length.

Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Link: https://lore.kernel.org/r/20220622223703.59886-1-dmichail@fungible.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-pcs-lynx-consolidate-gigabit-code'

Russell King says:

====================
net: pcs: lynx: consolidate gigabit code

This series consolidates the gigabit setup code in the Lynx PCS driver.
In order to do this properly, we first need to fix phylink's
advertisement encoding function to handle QSGMII.
====================

Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/YrRbjOEEww38JFIK@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pcs: lynx: consolidate sgmii and 1000base-x config code

Consolidate lynx_pcs_config_1000basex() and lynx_pcs_config_sgmii() into
a single function. The differences between these two are:

- The value that the link timer is set to.
- The value of the IF_MODE register.

Everything else is identical.

This patch depends on "net: phylink: add QSGMII support to
phylink_mii_c22_pcs_encode_advertisement()".

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: add QSGMII support to phylink_mii_c22_pcs_encode_advertisement()

The QSGMII MAC-to-PHY reply is the same as the SGMII MAC-to-PHY reply.
Add support for this to phylink_mii_c22_pcs_encode_advertisement().

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: lan743x: Use correct variable in lan743x_sgmii_config()

There is a copy and paste bug in lan743x_sgmii_config() so it checks
if (ret < 0) instead of if (mii_ctl < 0).

Fixes: 46b777ad9a8c ("net: lan743x: Add support to SGMII 1G and 2.5G")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/YrRry7K66BzKezl8@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlxsw-unified-bridge-conversion-part-3'

Ido Schimmel says:

====================
mlxsw: Unified bridge conversion - part 3/6

This is the third part of the conversion of mlxsw to the unified bridge
model.

Like the second part, this patchset does not begin the conversion, but
instead prepares the FID code for it. The individual changes are
relatively small and self-contained with detailed description and
motivation in the commit message.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Change mlxsw_sp_rif_vlan_fid_op() to be dedicated for FID RIFs

The function was designed to configure both VLAN and FID RIFs, but
currently the driver does not use VLAN RIFs. Instead, it emulates VLAN
RIFs using FID RIFs.

As part of the conversion to the unified bridge model, the driver will
need to use VLAN RIFs, but they will be configured differently from FID
RIFs.

As a preparation for this change, rename the function to reflect the
fact that it is specific to FID RIFs and do not pass the RIF type as an
argument.

This leaves mlxsw_reg_ritr_fid_set() unused, so remove it.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Rename MLXSW_SP_RIF_TYPE_VLAN

Currently, the driver emulates 802.1Q FIDs using 802.1D FIDs. As such,
the RIFs configured on top of these FIDs are FID RIFs and not VLAN RIFs.

As part of converting the driver to the unified bridge model, 802.1Q
FIDs and VLAN RIFs will be used.

As a preparation for this change, rename the emulated VLAN RIFs from
'MLXSW_SP_RIF_TYPE_VLAN' to 'MLXSW_SP_RIF_TYPE_VLAN_EMU'. After the
conversion the emulated VLAN RIFs will be removed.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Use different arrays of FID families per-ASIC type

Egress VID for layer 2 multicast is determined from two tables, the MPE
and PGT tables. The MPE table is a two dimensional table indexed by local
port and SMPE index, which should be thought of as a FID index.

In Spectrum-1 the SMPE index is derived from the PGT entry, whereas in
Spectrum-2 and newer ASICs the SMPE index is a FID attribute configured
via the SFMR register.

The validity of the SMPE index in SFMR is influenced from two factors:
1. FID family. SMPE index is reserved for rFIDs, as their flooding is
   handled by firmware.
2. ASIC generation. SMPE index is always reserved for Spectrum-1.

As such, the validity of the SMPE index should be an attribute of the FID
family and have different arrays of FID families per-ASIC type.

As a preparation for SMPE index configuration, create separate arrays of
FID families for different ASICs.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_fid: Pass FID structure to __mlxsw_sp_fid_port_vid_map()

The function configures {Port, VID}->FID classification entries using
the SVFA register. In the unified bridge model such entries will need to
be programmed with an ingress RIF parameter, which is a FID attribute.

As a preparation for this change, pass the FID structure itself to the
function.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_fid: Pass FID structure to mlxsw_sp_fid_op()

The function gets several arguments derived from the FID structure
itself. In the future, it will need to be extended to configure
additional FID attributes.

Prepare for that change and reduce the arguments list by passing the FID
structure itself.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_fid: Rename mlxsw_sp_fid_vni_op()

After the previous patch, all the callers of the function pass arguments
extracted from the FID structure itself. Reduce the arguments list by
simply passing the FID structure itself.

This makes the function more generic as it can be easily extended to
edit any FID attributes. Rename it to mlxsw_sp_fid_edit_op() to reflect
that.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_fid: Update FID structure prior to device configuration

Currently, the only FID attributes that are edited after FID creation
are its VNI and NVE tunnel flood pointer. This is achieved by eventually
invoking mlxsw_sp_fid_vni_op() with an updated set of arguments.

In the future, more FID attributes will need to be edited, such as the
ingress RIF configured on top of the FID.

Therefore, it makes sense to encapsulate all the FID edit logic in one
function that will perform the edit based on an updated FID structure.

To that end, update the FID structure before invoking the various edit
operations that eventually call into mlxsw_sp_fid_vni_op(). Use the
updated structure as the sole argument of the edit operations.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_fid: Maintain {port, VID}->FID mappings

In the unified bridge model, FID classification mappings (e.g., {Port,
VID}->FID) and layer 3 egress VID classification mappings (i.e., {eRIF,
ePort}->VID) will need to be updated when a RIF is configured on top of
a FID. This requires the driver to be aware of all the {Port, VID} pairs
mapped to a FID.

To that end, extend the FID structure with a linked list of {Port, VID}
pairs. Add an entry to the list when a {Port, VID} is mapped to a FID
and remove it upon unmap.

Keep the list sorted by local port as it will be useful for {eRIF,
ePort}->VID mappings via REIV register in the future.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ipmr-remove-rwlocks'

Eric Dumazet says:

====================
ipmr: get rid of rwlocks

We need to get rid of rwlocks in networking stacks,
if read_lock() is (ab)used from softirq context.

As discussed recently [1], rwlock are unfair by design in this case,
and writers can starve and trigger soft lockups.

This series convert ipmr code (both IPv4 and IPv6 families)
to RCU and spinlocks.

[1] https://lkml.org/lkml/2022/6/17/272

v2: fixed two typos, and resent because patch 19/19
    did not make it to patchwork.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ip6mr: convert mrt_lock to a spinlock

mrt_lock is only held in write mode, from process context only.

We can switch to a mere spinlock, and avoid blocking BH.

Also, vif_dev_read() is always called under standard rcu_read_lock().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: convert mrt_lock to a spinlock

mrt_lock is only held in write mode, from process context only.

We can switch to a mere spinlock, and avoid blocking BH.

Also, vif_dev_read() is always called under standard rcu_read_lock().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: convert /proc handlers to rcu_read_lock()

We can use standard rcu_read_lock(), to get rid
of last read_lock(&mrt_lock) call points.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: adopt rcu_read_lock() in mr_dump()

We no longer need to acquire mrt_lock() in mr_dump,
using rcu_read_lock() is enough.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6mr: switch ip6mr_get_route() to rcu_read_lock()

Like ipmr_get_route(), we can use standard RCU here.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6mr: do not acquire mrt_lock while calling ip6_mr_forward()

ip6_mr_forward() uses standard RCU protection already.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6mr: do not acquire mrt_lock before calling ip6mr_cache_unresolved

rcu_read_lock() protection is good enough.

ip6mr_cache_unresolved() uses a dedicated spinlock (mfc_unres_lock)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6mr: do not acquire mrt_lock in ioctl(SIOCGETMIFCNT_IN6)

rcu_read_lock() protection is good enough.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6mr: do not acquire mrt_lock in pim6_rcv()

rcu_read_lock() protection is more than enough.

vif_dev_read() supports either mrt_lock or rcu_read_lock().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6mr: ip6mr_cache_report() changes

ip6mr_cache_report() first argument can be marked const, and we change
the caller convention about which lock needs to be held.

Instead of read_lock(&mrt_lock), we can use rcu_read_lock().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: do not acquire mrt_lock in ipmr_get_route()

mr_fill_mroute() uses standard rcu_read_unlock(),
no need to grab mrt_lock anymore.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: do not acquire mrt_lock while calling ip_mr_forward()

ip_mr_forward() uses standard RCU protection already.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: do not acquire mrt_lock before calling ipmr_cache_unresolved()

rcu_read_lock() protection is good enough.

ipmr_cache_unresolved() uses a dedicated spinlock (mfc_unres_lock)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: do not acquire mrt_lock in ioctl(SIOCGETVIFCNT)

rcu_read_lock() protection is good enough.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: do not acquire mrt_lock in __pim_rcv()

rcu_read_lock() protection is more than enough.

vif_dev_read() supports either mrt_lock or rcu_read_lock().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: ipmr_cache_report() changes

ipmr_cache_report() first argument can be marked const, and we change
the caller convention about which lock needs to be held.

Instead of read_lock(&mrt_lock), we can use rcu_read_lock().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: change igmpmsg_netlink_event() prototype

igmpmsg_netlink_event() first argument can be marked const.

igmpmsg_netlink_event() reads mrt->net and mrt->id,
both being set once in mr_table_alloc().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr: add rcu protection over (struct vif_device)->dev

We will soon use RCU instead of rwlock in ipmr & ip6mr

This preliminary patch adds proper rcu verbs to read/write
(struct vif_device)->dev

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6mr: do not get a device reference in pim6_rcv()

pim6_rcv() is called under rcu_read_lock(), there is
no need to use dev_hold()/dev_put() pair.

IPv4 side was handled in commit 55747a0a73ea
("ipmr: __pim_rcv() is called under rcu_read_lock")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'dsa-microchip-common-spi-probe'

Arun Ramadoss says:

====================
net: dsa: microchip: common spi probe for the ksz series switches - part 2

This patch series aims to refactor the ksz_switch_register routine to have the
common flow for the ksz series switch. And this is the follow up patch series.

First, it tries moves the common implementation in the setup from individual
files to ksz_setup. Then implements the common dsa_switch_ops structure instead
of independent registration. And then moves the ksz_dev_ops to ksz_common.c,
it allows the dynamic detection of which ksz_dev_ops to be used based on
the switch detection function.

Finally, the patch updates the ksz_spi probe function to be same for all the
ksz_switches.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: common ksz_spi_probe for ksz switches

As of now, there are two spi probes, one ksz8795_spi.c and other
ksz9477_spi.c. This patch combines two files into single ksz_spi.c. The
difference between the two are regmap config and struct ksz8. The regmap
config is assigned based on the platform data. And struct ksz8 is left
untouched, as it is used only ksz8795.c. It can be used for all
other switches also in future.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: remove the ksz8/ksz9477_switch_register

This patch delete the ksz8_switch_register and ksz9477_switch_register
since both are calling the ksz_switch_register function. Instead the
ksz_switch_register is called from the probe function.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: move ksz_dev_ops to ksz_common.c

This patch move the ksz_dev_ops from individual files to ksz_common.c.
And the dev_ops is assigned to ksz_device based on the switch detect.
This reduces the redundant function and allows to reuse the
functionality for LAN937x which has similar register set.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: common menuconfig for ksz series switch

This patch replaces the two different menuconfig for ksz9477 and ksz8795
to single ksz_common. so that it can be extended for the other switch
like lan937x. And removes the export_symbols for the extern functions in
the ksz_common.h.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: ksz9477: separate phylink mode from switch register

As per 'commit 3506b2f42dff ("net: dsa: microchip: call
phy_remove_link_mode during probe")' phy_remove_link_mode is added in
the switch_register function after dsa_switch_register. In order to have
the common switch register function, moving this phylink validation to
phylink_get_caps validation hook.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: common dsa_switch_ops for ksz switches

At present, ksz8795.c and ksz9477.c have separate dsa_switch_ops
structure initialization. This patch modifies the files such a way that
ksz switches has common dsa_switch_ops in the ksz_common.c file.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: move start of switch to ksz_setup

This patch move the setting the start bit from the individual switch
configuration to ksz_setup

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: move multicast enable to ksz_setup

This patch moves the enabling the multicast storm protection from
individual setup function to ksz_setup function.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: move broadcast rate limit to ksz_setup

This patch move the 10% broadcast protection from the individual setup
to ksz_setup. In the ksz9477, broadcast protection is updated in reset
function.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: move setup function to ksz_common

This patch move the common initialization of switches to ksz_setup and
perform the switch specific initialization using the ksz_dev_ops
function pointer.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: add the enable_stp_addr pointer in ksz_dev_ops

In order to transmit the STP BPDU packet to the CPU port, the STP
address 01-80-c2-00-00-00 has to be added to static alu table for
ksz8795 series switch. For the ksz9477 switch, there is reserved
multicast table which handles forwarding the particular set of
multicast address to cpu port. So enabling the multicast reserved table
and updated the cpu port index. The stp addr is enabled during the setup
phase using the enable_stp_addr pointer in struct ksz_dev_ops.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: add config_cpu_port to struct ksz_dev_ops

To have the common set of initialization in ksz_setup, introduced the
new config_cpu_port member to ksz_dev_ops. Since both the ksz8795.c and
ksz9477.c configuring the cpu port in the setup function, introduced the
member.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: rename shutdown to reset in ksz_dev_ops

This patch renames the shutdown to reset in ksz_dev_ops in order to use
the reset dev_ops in the ksz_setup.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bonding-per-port-priorities'

Hangbin Liu says:

====================
Bonding: add per-port priority support

This patch set add per-port priority for bonding failover re-selection.

The first patch add a new filed for bond_opt_value so we can set slave
value easier. I will update the bond_option_queue_id_set() setting
in later patch.

The second patch add the per-port priority for bonding. I defined
it as s32 to compatible with team prio option, which also use a s32
value.

v3: store slave_dev in bond_opt_value directly to simplify setting
    values for slave.

v2: using the extant bonding options management stuff instead setting
    slave prio in bond_slave_changelink() directly.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Bonding: add per-port priority for failover re-selection

Add per port priority support for bonding active slave re-selection during
failover. A higher number means higher priority in selection. The primary
slave still has the highest priority. This option also follows the
primary_reselect rules.

This option could only be configured via netlink.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: add slave_dev field for bond_opt_value

Currently, bond_opt_value are mostly used for bonding option settings. If
we want to set a value for slave, we need to re-alloc a string to store
both slave name and vlaue, like bond_option_queue_id_set() does, which
is complex and dumb.

As Jon suggested, let's add a union field slave_dev for bond_opt_value,
which will be benefit for future slave option setting. In function
__bond_opt_init(), we will always check the extra field and set it
if it's not NULL.

Suggested-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4/cxgb4vf: Fix typo in comments

Remove the repeated word 'and' from comments

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220622144841.21274-1-jiangjian@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt: Fix typo in comments

Remove the repeated word 'and' from comments

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220622144526.20659-1-jiangjian@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: mxl-gpy: add temperature sensor

The GPY115 and GPY2xx PHYs contain an integrated temperature sensor. It
accuracy is +/- 5°C. Add support for it.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220622141716.3517645-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-use-new-hwmon_sanitize_name'

Michael Walle says:

====================
net: use new hwmon_sanitize_name()

These are the remaining patches of my former series [1] which were hold
back because it would have required a stable branch between the subsystems.

[1] https://lore.kernel.org/r/20220405092452.4033674-1-michael@walle.cc/
====================

Link: https://lore.kernel.org/r/20220622123543.3463209-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: nxp-tja11xx: use devm_hwmon_sanitize_name()

Instead of open-coding the bad characters replacement in the hwmon name,
use the new devm_hwmon_sanitize_name().

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sfp: use hwmon_sanitize_name()

Instead of open-coding the bad characters replacement in the hwmon name,
use the new hwmon_sanitize_name().

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'broadcom-ptp-phy-support'

Jonathan Lemon says:

====================
Broadcom PTP PHY support

This adds PTP support for the Broadcom PHY BCM54210E (and the
specific variant BCM54213PE that the rpi-5.15 branch uses).

This has only been tested on the RPI CM4, which has one port.

There are other Broadcom chips which may benefit from using the
same framework here, although with different register sets.
====================

Link: https://lore.kernel.org/r/20220622050454.878052-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: Add support for 1PPS out and external timestamps

The perout function is used to generate a 1PPS signal, synchronized
to the PHC.  This is accomplished by a using the hardware oneshot
functionality, which is reset by a timer.

The external timestamp function is set up for a 1PPS input pulse,
and uses a timer to poll for temestamps.

Both functions use the SYNC_OUT/SYNC_IN1 pin, so cannot run
simultaneously.

Co-developed-by: Lasse Johnsen <l@ssejohnsen.me>
Signed-off-by: Lasse Johnsen <l@ssejohnsen.me>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: broadcom: Add PTP support for some Broadcom PHYs.

This adds PTP support for BCM54210E Broadcom PHYs, in particular,
the BCM54213PE, as used in the Rasperry PI CM4.  It has only been
tested on that hardware.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: broadcom: Add Broadcom PTP hooks to bcm-phy-lib

Add 'struct bcm_ptp_private' to bcm54xx_phy_priv which points to
an optional PTP structure attached to the PHY.  This is allocated
on probe if PHY PTP support is configured, and if the driver supports
PTP for the specified PHY.

Add the bcm_ptp_probe(), bcm_ptp_config_init() and bcn_ptp_stop()
API functions to the bcm-phy library.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>