sh: kernel: hw_breakpoint: Fix missing break in switch statement

commit 1ee1119d184bb06af921b48c3021d921bbd85bac upstream.

Add missing break statement in order to prevent the code from falling
through to case SH_BREAKPOINT_WRITE.

Fixes: 09a072947791 ("sh: hw-breakpoints: Add preliminary support for SH-4A UBC.")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.67

iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support

commit f5a47fae6aa3eb06f100e701d2342ee56b857bee upstream.

We erroneously added a check for FW API version 41 before sending
GEO_TX_POWER_LIMIT, but this was already implemented in version 38.
Additionally, it was cherry-picked to older versions, namely 17, 26
and 29, so check for those as well.

Cc: stable@vger.kernel.org
Fixes: eca1e56ceedd ("iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT on version < 41

commit 39bd984c203e86f3109b49c2a2e20677c4d3ab65 upstream.

Firmware versions before 41 don't support the GEO_TX_POWER_LIMIT
command, and sending it to the firmware will cause a firmware crash.
We allow this via debugfs, so we need to return an error value in case
it's not supported.

This had already been fixed during init, when we send the command if
the ACPI WGDS table is present.  Fix it also for the other,
userspace-triggered case.

Cc: stable@vger.kernel.org
Fixes: 7fe90e0e3d60 ("iwlwifi: mvm: refactor geo init")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix an out-of-bound access

commit ba3224db78034435e9ff0247277cce7c7bb1756c upstream.

The index for the elements of the ACPI object we dereference
was static. This means that if we called the function twice
we wouldn't start from 3 again, but rather from the latest
index we reached in the previous call.
This was dutifully reported by KASAN.

Fix this.

Cc: stable@vger.kernel.org
Fixes: 6996490501ed ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: don't unmap as page memory that was mapped as single

commit 87e7e25aee6b59fef740856f4e86d4b60496c9e1 upstream.

In order to remember how to unmap a memory (as single or
as page), we maintain a bit per Transmit Buffer (TBs) in
the meta data (structure iwl_cmd_meta).
We maintain a bitmap: 1 bit per TB.
If the TB is set, we will free the memory as a page.
This bitmap was never cleared. Fix this.

Cc: stable@vger.kernel.org
Fixes: 3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: fix 802.11n/WPA detection

commit df612421fe2566654047769c6852ffae1a31df16 upstream.

Commit 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant
vendor IEs") adjusted the ieee_types_vendor_header struct, which
inadvertently messed up the offsets used in
mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring
mwifiex_is_rsn_oui_present().

As it stands, commit 63d7ef36103d breaks compatibility with WPA (not
WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is
not supported by AP" case in mwifiex_is_network_compatible().

Fixes: 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Fix leak vCPU's VMCS value into other pCPU

commit 17e433b54393a6269acbcb792da97791fe1592d8 upstream.

After commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts), a
five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs
on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting
in the VMs after stress testing:

 INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073)
 Call Trace:
   flush_tlb_mm_range+0x68/0x140
   tlb_flush_mmu.part.75+0x37/0xe0
   tlb_finish_mmu+0x55/0x60
   zap_page_range+0x142/0x190
   SyS_madvise+0x3cd/0x9c0
   system_call_fastpath+0x1c/0x21

swait_active() sustains to be true before finish_swait() is called in
kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account
by kvm_vcpu_on_spin() loop greatly increases the probability condition
kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv
is enabled the yield-candidate vCPU's VMCS RVI field leaks(by
vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current
VMCS.

This patch fixes it by checking conservatively a subset of events.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Marc Zyngier <Marc.Zyngier@arm.com>
Cc: stable@vger.kernel.org
Fixes: 98f4a1467 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Fix an Oops in nfs4_do_setattr

commit 09a54f0ebfe263bc27c90bbd80187b9a93283887 upstream.

If the user specifies an open mode of 3, then we don't have a NFSv4 state
attached to the context, and so we Oops when we try to dereference it.

Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 29b59f9416937 ("NFSv4: change nfs4_do_setattr to take...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.10: 991eedb1371dc: NFSv4: Only pass the...
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: send CAP_DFS capability during session setup

commit 8d33096a460d5b9bd13300f01615df5bb454db10 upstream.

We had a report of a server which did not do a DFS referral
because the session setup Capabilities field was set to 0
(unlike negotiate protocol where we set CAP_DFS).  Better to
send it session setup in the capabilities as well (this also
more closely matches Windows client behavior).

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB3: Fix deadlock in validate negotiate hits reconnect

commit e99c63e4d86d3a94818693147b469fa70de6f945 upstream.

Currently we skip SMB2_TREE_CONNECT command when checking during
reconnect because Tree Connect happens when establishing
an SMB session. For SMB 3.0 protocol version the code also calls
validate negotiate which results in SMB2_IOCL command being sent
over the wire. This may deadlock on trying to acquire a mutex when
checking for reconnect. Fix this by skipping SMB2_IOCL command
when doing the reconnect check.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dax: dax_layout_busy_page() should not unmap cow pages

commit d75996dd022b6d83bd14af59b2775b1aa639e4b9 upstream.

Vivek:

    "As of now dax_layout_busy_page() calls unmap_mapping_range() with last
     argument as 1, which says even unmap cow pages. I am wondering who needs
     to get rid of cow pages as well.

     I noticed one interesting side affect of this. I mount xfs with -o dax and
     mmaped a file with MAP_PRIVATE and wrote some data to a page which created
     cow page. Then I called fallocate() on that file to zero a page of file.
     fallocate() called dax_layout_busy_page() which unmapped cow pages as well
     and then I tried to read back the data I wrote and what I get is old
     data from persistent memory. I lost the data I had written. This
     read basically resulted in new fault and read back the data from
     persistent memory.

     This sounds wrong. Are there any users which need to unmap cow pages
     as well? If not, I am proposing changing it to not unmap cow pages.

     I noticed this while while writing virtio_fs code where when I tried
     to reclaim a memory range and that corrupted the executable and I
     was running from virtio-fs and program got segment violation."

Dan:

    "In fact the unmap_mapping_range() in this path is only to synchronize
     against get_user_pages_fast() and force it to call back into the
     filesystem to re-establish the mapping. COW pages should be left
     untouched by dax_layout_busy_page()."

Cc: <stable@vger.kernel.org>
Fixes: 5fac7408d828 ("mm, fs, dax: handle layout changes to pinned dax mappings")
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20190802192956.GA3032@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: don't WARN on short WMM parameters from AP

commit 05aaa5c97dce4c10a9e7eae2f1569a684e0c5ced upstream.

In a very similar spirit to commit c470bdc1aaf3 ("mac80211: don't WARN
on bad WMM parameters from buggy APs"), an AP may not transmit a
fully-formed WMM IE. For example, it may miss or repeat an Access
Category. The above loop won't catch that and will instead leave one of
the four ACs zeroed out. This triggers the following warning in
drv_conf_tx()

  wlan0: invalid CW_min/CW_max: 0/0

and it may leave one of the hardware queues unconfigured. If we detect
such a case, let's just print a warning and fall back to the defaults.

Tested with a hacked version of hostapd, intentionally corrupting the
IEs in hostapd_eid_wmm().

Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457)

commit c02f77d32d2c45cfb1b2bb99eabd8a78f5ecc7db upstream.

A long-time problem on the recent AMD chip (X370, X470, B450, etc with
PCI ID 1022:1457) with Realtek codecs is the crackled or distorted
sound for capture streams, as well as occasional playback hiccups.
After lengthy debugging sessions, the workarounds we've found are like
the following:

- Set up the proper driver caps for this controller, similar as the
  other AMD controller.

- Correct the DMA position reporting with the fixed FIFO size, which
  is similar like as workaround used for VIA chip set.

- Even after the position correction, PulseAudio still shows
  mysterious stalls of playback streams when a capture is triggered in
  timer-scheduled mode.  Since we have no clear way to eliminate the
  stall, pass the BATCH PCM flag for PA to suppress the tsched mode as
  a temporary workaround.

This patch implements the workarounds.  For the driver caps, it
defines a new preset, AXZ_DCAPS_PRESET_AMD_SB.  It enables the FIFO-
corrected position reporting (corresponding to the new position_fix=6)
and enforces the SNDRV_PCM_INFO_BATCH flag.

Note that the current implementation is merely a workaround.
Hopefully we'll find a better alternative in future, especially about
removing the BATCH flag hack again.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Don't override global PCM hw info flag

commit c1c6c877b0c79fd7e05c931435aa42211eaeebaf upstream.

The commit bfcba288b97f ("ALSA - hda: Add support for link audio time
reporting") introduced the conditional PCM hw info setup, but it
overwrites the global azx_pcm_hw object.  This will cause a problem if
any other HD-audio controller, as it'll inherit the same bit flag
although another controller doesn't support that feature.

Fix the bug by setting the PCM hw info flag locally.

Fixes: bfcba288b97f ("ALSA - hda: Add support for link audio time reporting")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hiface: fix multiple memory leak bugs

commit 3d92aa45fbfd7319e3a19f4ec59fd32b3862b723 upstream.

In hiface_pcm_init(), 'rt' is firstly allocated through kzalloc(). Later
on, hiface_pcm_init_urb() is invoked to initialize 'rt->out_urbs[i]'. In
hiface_pcm_init_urb(), 'rt->out_urbs[i].buffer' is allocated through
kzalloc().  However, if hiface_pcm_init_urb() fails, both 'rt' and
'rt->out_urbs[i].buffer' are not deallocated, leading to memory leak bugs.
Also, 'rt->out_urbs[i].buffer' is not deallocated if snd_pcm_new() fails.

To fix the above issues, free 'rt' and 'rt->out_urbs[i].buffer'.

Fixes: a91c3fb2f842 ("Add M2Tech hiFace USB-SPDIF driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire: fix a memory leak bug

commit 1be3c1fae6c1e1f5bb982b255d2034034454527a upstream.

In iso_packets_buffer_init(), 'b->packets' is allocated through
kmalloc_array(). Then, the aligned packet size is checked. If it is
larger than PAGE_SIZE, -EINVAL will be returned to indicate the error.
However, the allocated 'b->packets' is not deallocated on this path,
leading to a memory leak.

To fix the above issue, free 'b->packets' before returning the error code.

Fixes: 31ef9134eb52 ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v2.6.39+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix wrong escape clock divisor init for GLK

commit 73a0ff0b30af79bf0303d557eb82f1d1945bb6ee upstream.

According to Bspec clock divisor registers in GeminiLake
should be initialized by shifting 1(<<) to amount of correspondent
divisor. While i915 was writing all this time that value as is.

Surprisingly that it by accident worked, until we met some issues
with Microtech Etab.

v2: Added Fixes tag and cc
v3: Added stable to cc as well.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108826
Fixes: bcc657004841 ("drm/i915/glk: Program txesc clock divider for GLK")
Cc: Deepak M <m.deepak@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712081938.14185-1-stanislav.lisovskiy@intel.com
(cherry picked from commit ce52ad5dd52cfaf3398058384e0ff94134bbd89c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (nct7802) Fix wrong detection of in4 presence

commit 38ada2f406a9b81fb1249c5c9227fa657e7d5671 upstream.

The code to detect if in4 is present is wrong; if in4 is not present,
the in4_input sysfs attribute is still present.

In detail:

- Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug).
- If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input
  file under /sys and the "sensors" command displays in4_input.
  But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep.

Fix is_visible function to detect and report in4_input visibility
as expected.

Reported-by: Gilles Buloz <Gilles.Buloz@kontron.com>
Cc: Gilles Buloz <Gilles.Buloz@kontron.com>
Cc: stable@vger.kernel.org
Fixes: 3434f37835804 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: peak_usb: pcan_usb_fd: Fix info-leaks to USB devices

commit 30a8beeb3042f49d0537b7050fd21b490166a3d9 upstream.

Uninitialized Kernel memory can leak to USB devices.

Fix by using kzalloc() instead of kmalloc() on the affected buffers.

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+513e4d0985298538bf9b@syzkaller.appspotmail.com
Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices

commit ead16e53c2f0ed946d82d4037c630e2f60f4ab69 upstream.

Uninitialized Kernel memory can leak to USB devices.

Fix by using kzalloc() instead of kmalloc() on the affected buffers.

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+d6a5a1a3657b596ef132@syzkaller.appspotmail.com
Fixes: f14e22435a27 ("net: can: peak_usb: Do not do dma on the stack")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: fix a memory leak bug

commit a67060201b746a308b1674f66bf289c9faef6d09 upstream.

In snd_usb_get_audioformat_uac3(), a structure for channel maps 'chmap' is
allocated through kzalloc() before the execution goto 'found_clock'.
However, this structure is not deallocated if the memory allocation for
'pd' fails, leading to a memory leak bug.

To fix the above issue, free 'fp->chmap' before returning NULL.

Fixes: 7edf3b5e6a45 ("ALSA: usb-audio: AudioStreaming Power Domain parsing")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/purgatory: Do not use __builtin_memcpy and __builtin_memset

commit 4ce97317f41d38584fb93578e922fcd19e535f5b upstream.

Implementing memcpy and memset in terms of __builtin_memcpy and
__builtin_memset is problematic.

GCC at -O2 will replace calls to the builtins with calls to memcpy and
memset (but will generate an inline implementation at -Os).  Clang will
replace the builtins with these calls regardless of optimization level.
$ llvm-objdump -dr arch/x86/purgatory/string.o | tail

0000000000000339 memcpy:
     339: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax
                000000000000033b:  R_X86_64_64  memcpy
     343: ff e0                         jmpq    *%rax

0000000000000345 memset:
     345: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax
                0000000000000347:  R_X86_64_64  memset
     34f: ff e0

Such code results in infinite recursion at runtime. This is observed
when doing kexec.

Instead, reuse an implementation from arch/x86/boot/compressed/string.c.
This requires to implement a stub function for warn(). Also, Clang may
lower memcmp's that compare against 0 to bcmp's, so add a small definition,
too. See also: commit 5f074f3e192f ("lib/string.c: implement a basic bcmp")

Fixes: 8fc5b4d4121c ("purgatory: core purgatory functionality")
Reported-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Debugged-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Debugged-by: Manoj Gupta <manojgupta@google.com>
Suggested-by: Alistair Delva <adelva@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Cc: stable@vger.kernel.org
Link: https://bugs.chromium.org/p/chromium/issues/detail?id=984056
Link: https://lkml.kernel.org/r/20190807221539.94583-1-ndesaulniers@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: sony: Fix race condition between rumble and device remove.

commit e0f6974a54d3f7f1b5fdf5a593bd43ce9206ec04 upstream.

Valve reported a kernel crash on Ubuntu 18.04 when disconnecting a DS4
gamepad while rumble is enabled. This issue is reproducible with a
frequency of 1 in 3 times in the game Borderlands 2 when using an
automatic weapon, which triggers many rumble operations.

We found the issue to be a race condition between sony_remove and the
final device destruction by the HID / input system. The problem was
that sony_remove didn't clean some of its work_item state in
"struct sony_sc". After sony_remove work, the corresponding evdev
node was around for sufficient time for applications to still queue
rumble work after "sony_remove".

On pre-4.19 kernels the race condition caused a kernel crash due to a
NULL-pointer dereference as "sc->output_report_dmabuf" got freed during
sony_remove. On newer kernels this crash doesn't happen due the buffer
now being allocated using devm_kzalloc. However we can still queue work,
while the driver is an undefined state.

This patch fixes the described problem, by guarding the work_item
"state_worker" with an initialized variable, which we are setting back
to 0 on cleanup.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dma: provide proper ARCH_ZONE_DMA_BITS value

[ Upstream commit 1a2dcff881059dedc14fafc8a442664c8dbd60f1 ]

On s390 ZONE_DMA is up to 2G, i.e. ARCH_ZONE_DMA_BITS should be 31 bits.
The current value is 24 and makes __dma_direct_alloc_pages() take a
wrong turn first (but __dma_direct_alloc_pages() recovers then).

Let's correct ARCH_ZONE_DMA_BITS value and avoid wrong turns.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Petr Tesarik <ptesarik@suse.cz>
Fixes: c61e9637340e ("dma-direct: add support for allocation from ZONE_DMA and ZONE_DMA32")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/core: Fix creating kernel counters for PMUs that override event->cpu

[ Upstream commit 4ce54af8b33d3e21ca935fc1b89b58cbba956051 ]

Some hardware PMU drivers will override perf_event.cpu inside their
event_init callback. This causes a lockdep splat when initialized through
the kernel API:

 WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208
 pc : ctx_sched_out+0x78/0x208
 Call trace:
  ctx_sched_out+0x78/0x208
  __perf_install_in_context+0x160/0x248
  remote_function+0x58/0x68
  generic_exec_single+0x100/0x180
  smp_call_function_single+0x174/0x1b8
  perf_install_in_context+0x178/0x188
  perf_event_create_kernel_counter+0x118/0x160

Fix this by calling perf_install_in_context with event->cpu, just like
perf_event_open

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop

[ Upstream commit 952041a8639a7a3a73a2b6573cb8aa8518bc39f8 ]

While reviewing rwsem down_slowpath, Will noticed ldsem had a copy of
a bug we just found for rwsem.

  X = 0;

  CPU0 CPU1

  rwsem_down_read()
    for (;;) {
      set_current_state(TASK_UNINTERRUPTIBLE);

                        X = 1;
                        rwsem_up_write();
                          rwsem_mark_wake()
                            atomic_long_add(adjustment, &sem->count);
                            smp_store_release(&waiter->task, NULL);

      if (!waiter.task)
        break;

      ...
    }

  r = X;

Allows 'r == 0'.

Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4898e640caf0 ("tty: Add timed, writer-prioritized rw semaphore")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

test_firmware: fix a memory leak bug

[ Upstream commit d4fddac5a51c378c5d3e68658816c37132611e1f ]

In test_firmware_init(), the buffer pointed to by the global pointer
'test_fw_config' is allocated through kzalloc(). Then, the buffer is
initialized in __test_firmware_config_init(). In the case that the
initialization fails, the following execution in test_firmware_init() needs
to be terminated with an error code returned to indicate this failure.
However, the allocated buffer is not freed on this execution path, leading
to a memory leak bug.

To fix the above issue, free the allocated buffer before returning from
test_firmware_init().

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Link: https://lore.kernel.org/r/1563084696-6865-1-git-send-email-wang6495@umn.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG

[ Upstream commit 20122994e38aef0ae50555884d287adde6641c94 ]

Retrying immediately after we've received a 'transitioning' sense code is
pretty much pointless, we should always use a delay before retrying.  So
ensure the default delay is applied before retrying.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Tested-by: Zhangguanghui <zhang.guanghui@h3c.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ibmvfc: fix WARN_ON during event pool release

[ Upstream commit 5578257ca0e21056821e6481bd534ba267b84e58 ]

While removing an ibmvfc client adapter a WARN_ON like the following
WARN_ON is seen in the kernel log:

WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541
ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
CPU: 6 PID: 5421 Comm: rmmod Tainted: G            E     4.17.0-rc1-next-20180419-autotest #1
NIP:  d00000000290328c LR: d00000000290325c CTR: c00000000036ee20
REGS: c000000288d1b7e0 TRAP: 0700   Tainted: G            E      (4.17.0-rc1-next-20180419-autotest)
MSR:  800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 44008828  XER: 20000000
CFAR: c00000000036e408 SOFTE: 1
GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448
GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001
GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640
GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598
GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0
GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100
GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8
NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc]
Call Trace:
[c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable)
[c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc]
[c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100
[c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0
[c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100
[c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140
[c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0
[c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50
[c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc]
[c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0
[c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c
Instruction dump:
e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200
2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028

This is tripped as a result of irqs being disabled during the call to
dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path
we have quiesced the adapter and its overly paranoid anyways to be holding the
host lock.

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid_sas: fix panic on loading firmware crashdump

[ Upstream commit 3b5f307ef3cb5022bfe3c8ca5b8f2114d5bf6c29 ]

While loading fw crashdump in function fw_crash_buffer_show(), left bytes
in one dma chunk was not checked, if copying size over it, overflow access
will cause kernel panic.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux

[ Upstream commit 3a9d2569e45cb02769cda26fee4a02126867c934 ]

The mdio-bus-mux has no #address-cells/#size-cells property,
which causes a few dtc warnings:

arch/arm/boot/dts/bcm47094-linksys-panamera.dts:129.4-18: Warning (reg_format): /mdio-bus-mux/mdio@200:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #address-cells value
arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #size-cells value

Add the normal cell numbers.

Link: https://lore.kernel.org/r/20190722145618.1155492-1-arnd@arndb.de
Fixes: 2bebdfcdcd0f ("ARM: dts: BCM5301X: Add support for Linksys EA9500")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: davinci: fix sleep.S build error on ARMv4

[ Upstream commit d64b212ea960db4276a1d8372bd98cb861dfcbb0 ]

When building a multiplatform kernel that includes armv4 support,
the default target CPU does not support the blx instruction,
which leads to a build failure:

arch/arm/mach-davinci/sleep.S: Assembler messages:
arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode

Add a .arch statement in the sources to make this file build.

Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix multipath crash when ANA is deactivated

[ Upstream commit 66b20ac0a1a10769d059d6903202f53494e3d902 ]

Fix a crash with multipath activated. It happends when ANA log
page is larger than MDTS and because of that ANA is disabled.
The driver then tries to access unallocated buffer when connecting
to a nvme target. The signature is as follows:

[  300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
[  300.435387] nvme nvme0: disabling ANA support.
[  300.437835] nvme nvme0: creating 4 I/O queues.
[  300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
[  300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  300.466342] #PF error: [normal kernel read fault]
[  300.467385] PGD 0 P4D 0
[  300.467987] Oops: 0000 [#1] SMP PTI
[  300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
[  300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[  300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.486626] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.488538] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.494991] Call Trace:
[  300.495645]  nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
[  300.496880]  nvme_validate_ns+0x2ef/0x550 [nvme_core]
[  300.498105]  ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
[  300.499539]  nvme_scan_work+0x2b4/0x370 [nvme_core]
[  300.500717]  ? __switch_to_asm+0x35/0x70
[  300.501663]  process_one_work+0x171/0x380
[  300.502340]  worker_thread+0x49/0x3f0
[  300.503079]  kthread+0xf8/0x130
[  300.503795]  ? max_active_store+0x80/0x80
[  300.504690]  ? kthread_bind+0x10/0x10
[  300.505502]  ret_from_fork+0x35/0x40
[  300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio
[  300.514984] CR2: 0000000000000008
[  300.515569] ---[ end trace faa2eefad7e7f218 ]---
[  300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.527084] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.528396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.533264] Kernel panic - not syncing: Fatal exception
[  300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---

Condition check refactoring from Christoph Hellwig.

Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()

[ Upstream commit 5a46d3f71d5e5a9f82eabc682f996f1281705ac7 ]

Static analysis identified that index comparison against ITS entries in
iort_dev_find_its_id() is off by one.

Update the comparison condition and clarify the resulting error
message.

Fixes: 4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling")
Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: dynamically allocate shash descriptor

[ Upstream commit 77ce56e2bfaa64127ae5e23ef136c0168b818777 ]

Building with clang and KASAN, we get a warning about an overly large
stack frame on 32-bit architectures:

drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect'
      [-Werror,-Wframe-larger-than=]

We already allocate other data dynamically in this function, so
just do the same for the shash descriptor, which makes up most of
this memory.

Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf probe: Avoid calling freeing routine multiple times for same pointer

[ Upstream commit d95daf5accf4a72005daa13fbb1d1bd8709f2861 ]

When perf_add_probe_events() we call cleanup_perf_probe_events() for the
pev pointer it receives, then, as part of handling this failure the main
'perf probe' goes on and calls cleanup_params() and that will again call
cleanup_perf_probe_events()for the same pointer, so just set nevents to
zero when handling the failure of perf_add_probe_events() to avoid the
double free.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix proper buffer size for feature processing

[ Upstream commit 79b2fe5e756163897175a8f57d66b26cd9befd59 ]

After Song Liu's segfault fix for pipe mode, Arnaldo reported following
error:

  # perf record -o - | perf script
  0x514 [0x1ac]: failed to process type: 80

It's caused by wrong buffer size setup in feature processing, which
makes cpu topology feature fail, because it's using buffer size to
recognize its header version.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Fixes: e9def1b2e74e ("perf tools: Add feature header record to pipe-mode")
Link: http://lkml.kernel.org/r/20190715140426.32509-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: compress: Be more restrictive about when a drain is allowed

[ Upstream commit 3b8179944cb0dd53e5223996966746cdc8a60657 ]

Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: compress: Don't allow paritial drain operations on capture streams

[ Upstream commit a70ab8a8645083f3700814e757f2940a88b7ef88 ]

Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: compress: Prevent bypasses of set_params

[ Upstream commit 26c3f1542f5064310ad26794c09321780d00c57d ]

Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: compress: Fix regression on compressed capture streams

[ Upstream commit 4475f8c4ab7b248991a60d9c02808dbb813d6be8 ]

A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.

To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.

Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qdio: add sanity checks to the fast-requeue path

[ Upstream commit a6ec414a4dd529eeac5c3ea51c661daba3397108 ]

If the device driver were to send out a full queue's worth of SBALs,
current code would end up discovering the last of those SBALs as PRIMED
and erroneously skip the SIGA-w. This immediately stalls the queue.

Add a check to not attempt fast-requeue in this case. While at it also
make sure that the state of the previous SBAL was successfully extracted
before inspecting it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()

[ Upstream commit e0a12445d1cb186d875410d093a00d215bec6a89 ]

The cpu variable is still being used in the of_get_property() call
after the of_node_put() call, which may result in use-after-free.

Fixes: a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: silence variable 'conn' set but not used

[ Upstream commit bbb6fc43f131f77fcb7ae8081f6d7c51396a2120 ]

The "struct drm_connector" iteration cursor from
"for_each_new_connector_in_state" is never used in atomic_remove_fb()
which generates a compilation warning,

drivers/gpu/drm/drm_framebuffer.c: In function 'atomic_remove_fb':
drivers/gpu/drm/drm_framebuffer.c:838:24: warning: variable 'conn' set
but not used [-Wunused-but-set-variable]

Silence it by marking "conn" __maybe_unused.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1563822886-13570-1-git-send-email-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (nct6775) Fix register address and added missed tolerance for nct6106

[ Upstream commit f3d43e2e45fd9d44ba52d20debd12cd4ee9c89bf ]

Fixed address of third NCT6106_REG_WEIGHT_DUTY_STEP, and
added missed NCT6106_REG_TOLERANCE_H.

Fixes: 6c009501ff200 ("hwmon: (nct6775) Add support for NCT6102D/6106D")
Signed-off-by: Bjoern Gerhart <gerhart@posteo.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

allocate_flower_entry: should check for null deref

[ Upstream commit bb1320834b8a80c6ac2697ab418d066981ea08ba ]

allocate_flower_entry does not check for allocation success, but tries
to deref the result. I only moved the spin_lock under null check, because
 the caller is checking allocation's status at line 652.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: don't warn about CW params when not using them

[ Upstream commit d2b3fe42bc629c2d4002f652b3abdfb2e72991c7 ]

ieee80211_set_wmm_default() normally sets up the initial CW min/max for
each queue, except that it skips doing this if the driver doesn't
support ->conf_tx. We still end up calling drv_conf_tx() in some cases
(e.g., ieee80211_reconfig()), which also still won't do anything
useful...except it complains here about the invalid CW parameters.

Let's just skip the WARN if we weren't going to do anything useful with
the parameters.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20190718015712.197499-1-briannorris@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN

[ Upstream commit 5edaac063bbf1267260ad2a5b9bb803399343e58 ]

NL80211_HE_MAX_CAPABILITY_LEN has changed between D2.0 and D4.0. It is now
MAC (6) + PHY (11) + MCS (12) + PPE (25) = 54.

Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190627095832.19445-1-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iscsi_ibft: make ISCSI_IBFT dependson ACPI instead of ISCSI_IBFT_FIND

[ Upstream commit 94bccc34071094c165c79b515d21b63c78f7e968 ]

iscsi_ibft can use ACPI to find the iBFT entry during bootup,
currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is
a X86 legacy way to find the iBFT by searching through the
low memory. This patch changes the dependency so that other
arch like ARM64 can use ISCSI_IBFT as long as the arch supports
ACPI.

ibft_init() needs to use the global variable ibft_addr declared
in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed
to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected.
Moving ibft_addr into the iscsi_ibft.c does not work because if
ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't
be able to find the variable at compile time.

Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Increase size of audios array

[ Upstream commit 7352193a33dfc9b69ba3bf6a8caea925b96243b1 ]

[Why]
The audios array defined in "struct resource_pool" is only 6 (MAX_PIPES)
but the max number of audio devices (num_audio) is 7. In some projects,
it will run out of audios array.

[How]
Incraese the audios array size to 7.

Signed-off-by: Tai Man <taiman.wong@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Only enable audio if speaker allocation exists

[ Upstream commit 6ac25e6d5b2fbf251e9fa2f4131d42c815b43867 ]

[Why]

In dm_helpers_parse_edid_caps, there is a corner case where no speakers
can be allocated even though the audio mode count is greater than 0.
Enabling audio when no speaker allocations exists can cause issues in
the video stream.

[How]

Add a check to not enable audio unless one or more speaker allocations
exist (since doing this can cause issues in the video stream).

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix dc_create failure handling and 666 color depths

[ Upstream commit 0905f32977268149f06e3ce6ea4bd6d374dd891f ]

[Why]
It is possible (but very unlikely) that constructing dc fails
before current_state is created.

We support 666 color depth in some scenarios, but this
isn't handled in get_norm_pix_clk. It uses exactly the
same pixel clock as the 888 case.

[How]
Check for non null current_state before destructing.

Add case for 666 color depth to get_norm_pix_clk to
avoid assertion.

Signed-off-by: Julian Parkin <julian.parkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: use encoder's engine id to find matched free audio device

[ Upstream commit 74eda776d7a4e69ec7aa1ce30a87636f14220fbb ]

[Why]
On some platforms, the encoder id 3 is not populated. So the encoders
are not stored in right order as index (id: 0, 1, 2, 4, 5) at pool. This
would cause encoders id 4 & id 5 to fail when finding corresponding
audio device, defaulting to the first available audio device. As result,
we cannot stream audio into two DP ports with encoders id 4 & id 5.

[How]
It need to create enough audio device objects (0 - 5) to perform matching.
Then use encoder engine id to find matched audio device.

Signed-off-by: Tai Man <taiman.wong@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Wait for backlight programming completion in set backlight level

[ Upstream commit c7990daebe71d11a9e360b5c3b0ecd1846a3a4bb ]

[WHY]
Currently we don't wait for blacklight programming completion in DMCU
when setting backlight level. Some sequences such as PSR static screen
event trigger reprogramming requires it to be complete.

[How]
Add generic wait for dmcu command completion in set backlight level.

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/sphinx-pre-install: fix script for RHEL/CentOS

[ Upstream commit b308467c916aa7acc5069802ab76a9f657434701 ]

There's a missing parenthesis at the script, with causes it to
fail to detect non-Fedora releases (e. g. RHEL/CentOS).

Tested with Centos 7.6.1810.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_hash: fix symhash with modulus one

[ Upstream commit 28b1d6ef53e3303b90ca8924bb78f31fa527cafb ]

The rule below doesn't work as the kernel raises -ERANGE.

nft add rule netdev nftlb lb01 ip daddr set \
symhash mod 1 map { 0 : 192.168.0.10 } fwd to "eth0"

This patch allows to use the symhash modulus with one
element, in the same way that the other types of hashes and
algorithms that uses the modulus parameter.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: always store window size un-scaled

[ Upstream commit 959b69ef57db00cb33e9c4777400ae7183ebddd3 ]

Jakub Jankowski reported following oddity:

After 3 way handshake completes, timeout of new connection is set to
max_retrans (300s) instead of established (5 days).

shortened excerpt from pcap provided:
25.070622 IP (flags [DF], proto TCP (6), length 52)
10.8.5.4.1025 > 10.8.1.2.80: Flags [S], seq 11, win 64240, [wscale 8]
26.070462 IP (flags [DF], proto TCP (6), length 48)
10.8.1.2.80 > 10.8.5.4.1025: Flags [S.], seq 82, ack 12, win 65535, [wscale 3]
27.070449 IP (flags [DF], proto TCP (6), length 40)
10.8.5.4.1025 > 10.8.1.2.80: Flags [.], ack 83, win 512, length 0

Turns out the last_win is of u16 type, but we store the scaled value:
512 << 8 (== 0x20000) becomes 0 window.

The Fixes tag is not correct, as the bug has existed forever, but
without that change all that this causes might cause is to mistake a
window update (to-nonzero-from-zero) for a retransmit.

Fixes: fbcd253d2448b8 ("netfilter: conntrack: lower timeout to RETRANS seconds if window is 0")
Reported-by: Jakub Jankowski <shasta@toxcorp.com>
Tested-by: Jakub Jankowski <shasta@toxcorp.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: Fix rpfilter dropping vrf packets by mistake

[ Upstream commit b575b24b8eee37f10484e951b62ce2a31c579775 ]

When firewalld is enabled with ipv4/ipv6 rpfilter, vrf
ipv4/ipv6 packets will be dropped. Vrf device will pass
through netfilter hook twice. One with enslaved device
and another one with l3 master device. So in device may
dismatch witch out device because out device is always
enslaved device.So failed with the check of the rpfilter
and drop the packets by mistake.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn

[ Upstream commit c1ab69268d124ebdbb3864580808188ccd3ea355 ]

So we don't call try to call vfio_unpin_pages() incorrectly.

Fixes: 0a19e61e6d4c ("vfio: ccw: introduce channel program interfaces")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <33a89467ad6369196ae6edf820cbcb1e2d8d050c.1562854091.git.alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nfnetlink: avoid deadlock due to synchronous request_module

[ Upstream commit 1b0890cd60829bd51455dc5ad689ed58c4408227 ]

Thomas and Juliana report a deadlock when running:

(rmmod nf_conntrack_netlink/xfrm_user)

  conntrack -e NEW -E &
  modprobe -v xfrm_user

They provided following analysis:

conntrack -e NEW -E
    netlink_bind()
        netlink_lock_table() -> increases "nl_table_users"
            nfnetlink_bind()
            # does not unlock the table as it's locked by netlink_bind()
                __request_module()
                    call_usermodehelper_exec()

This triggers "modprobe nf_conntrack_netlink" from kernel, netlink_bind()
won't return until modprobe process is done.

"modprobe xfrm_user":
    xfrm_user_init()
        register_pernet_subsys()
            -> grab pernet_ops_rwsem
                ..
                netlink_table_grab()
                    calls schedule() as "nl_table_users" is non-zero

so modprobe is blocked because netlink_bind() increased
nl_table_users while also holding pernet_ops_rwsem.

"modprobe nf_conntrack_netlink" runs and inits nf_conntrack_netlink:
    ctnetlink_init()
        register_pernet_subsys()
            -> blocks on "pernet_ops_rwsem" thanks to xfrm_user module

both modprobe processes wait on one another -- neither can make
progress.

Switch netlink_bind() to "nowait" modprobe -- this releases the netlink
table lock, which then allows both modprobe instances to complete.

Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Reported-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: peak_usb: fix potential double kfree_skb()

commit fee6a8923ae0d318a7f7950c6c6c28a96cea099b upstream.

When closing the CAN device while tx skbs are inflight, echo skb could
be released twice. By calling close_candev() before unlinking all
pending tx urbs, then the internal echo_skb[] array is fully and
correctly cleared before the USB write callback and, therefore,
can_get_echo_skb() are called, for each aborted URB.

Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: rcar_canfd: fix possible IRQ storm on high load

commit d4b890aec4bea7334ca2ca56fd3b12fb48a00cd1 upstream.

We have observed rcar_canfd driver entering IRQ storm under high load,
with following scenario:
- rcar_canfd_global_interrupt() in entered due to Rx available,
- napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state
- Rx fifo interrupts are masked,
- rcar_canfd_global_interrupt() is entered again, this time due to
  error interrupt (e.g. due to overflow),
- since scheduled napi poller has not yet executed, condition for calling
  napi_schedule_prep() from rcar_canfd_global_interrupt() remains true,
  thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag
  in state,
- later, napi poller function rcar_canfd_rx_poll() gets executed, and
  calls napi_complete_done(),
- due to NAPIF_STATE_MISSED flag in state, this call does not clear
  NAPIF_STATE_SCHED flag from state,
- on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx
  interrutps,
- Rx interrupt happens, rcar_canfd_global_interrupt() gets called
  and calls napi_schedule_prep(),
- since NAPIF_STATE_SCHED is set in state at this time, this call
  returns false,
- due to that false return, rcar_canfd_global_interrupt() returns
  without masking Rx interrupt
- and this results into IRQ storm: unmasked Rx interrupt happens again
  and again is misprocessed in the same way.

This patch fixes that scenario by unmasking Rx interrupts only when
napi_complete_done() returns true, which means it has cleared
NAPIF_STATE_SCHED in state.

Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests

commit 88d02c9ba2e83fc22d37ccb1f11c62ea6fc9ae50 upstream.

TCPM may receive PD messages associated with unknown or unsupported
alternate modes. If that happens, calls to typec_match_altmode()
will return NULL. The tcpm code does not currently take this into
account. This results in crashes.

Unable to handle kernel NULL pointer dereference at virtual address 000001f0
pgd = 41dad9a1
[000001f0] *pgd=00000000
Internal error: Oops: 5 [#1] THUMB2
Modules linked in: tcpci tcpm
CPU: 0 PID: 2338 Comm: kworker/u2:0 Not tainted 5.1.18-sama5-armv7-r2 #6
Hardware name: Atmel SAMA5
Workqueue: 2-0050 tcpm_pd_rx_handler [tcpm]
PC is at typec_altmode_attention+0x0/0x14
LR is at tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm]
...
[<c03fbee8>] (typec_altmode_attention) from [<bf8030fb>]
(tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm])
[<bf8030fb>] (tcpm_pd_rx_handler [tcpm]) from [<c012082b>]
(process_one_work+0x123/0x2a8)
[<c012082b>] (process_one_work) from [<c0120a6d>]
(worker_thread+0xbd/0x3b0)
[<c0120a6d>] (worker_thread) from [<c012431f>] (kthread+0xcf/0xf4)
[<c012431f>] (kthread) from [<c01010f9>] (ret_from_fork+0x11/0x38)

Ignore PD messages if the associated alternate mode is not supported.

Fixes: e9576fe8e605c ("usb: typec: tcpm: Support for Alternate Modes")
Cc: stable <stable@vger.kernel.org>
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1564761822-13984-1-git-send-email-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: Add NULL check before dereferencing config

commit 1957de95d425d1c06560069dc7277a73a8b28683 upstream.

When instantiating tcpm on an NXP OM 13588 board with NXP PTN5110,
the following crash is seen when writing into the 'preferred_role'
sysfs attribute.

Unable to handle kernel NULL pointer dereference at virtual address 00000028
pgd = f69149ad
[00000028] *pgd=00000000
Internal error: Oops: 5 [#1] THUMB2
Modules linked in: tcpci tcpm
CPU: 0 PID: 1882 Comm: bash Not tainted 5.1.18-sama5-armv7-r2 #4
Hardware name: Atmel SAMA5
PC is at tcpm_try_role+0x3a/0x4c [tcpm]
LR is at tcpm_try_role+0x15/0x4c [tcpm]
pc : [<bf8000e2>]    lr : [<bf8000bd>]    psr: 60030033
sp : dc1a1e88  ip : c03fb47d  fp : 00000000
r10: dc216190  r9 : dc1a1f78  r8 : 00000001
r7 : df4ae044  r6 : dd032e90  r5 : dd1ce340  r4 : df4ae054
r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : df4ae044
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment none
Control: 50c53c7d  Table: 3efec059  DAC: 00000051
Process bash (pid: 1882, stack limit = 0x6a6d4aa5)
Stack: (0xdc1a1e88 to 0xdc1a2000)
1e80:                   dd05d808 dd1ce340 00000001 00000007 dd1ce340 c03fb4a7
1ea0: 00000007 00000007 dc216180 00000000 00000000 c01e1e03 00000000 00000000
1ec0: c0907008 dee98b40 c01e1d5d c06106c4 00000000 00000000 00000007 c0194e8b
1ee0: 0000000a 00000400 00000000 c01a97db dc22bf00 ffffe000 df4b6a00 df745900
1f00: 00000001 00000001 000000dd c01a9c2f 7aeab3be c0907008 00000000 dc22bf00
1f20: c0907008 00000000 00000000 00000000 00000000 7aeab3be 00000007 dee98b40
1f40: 005dc318 dc1a1f78 00000000 00000000 00000007 c01969f7 0000000a c01a20cb
1f60: dee98b40 c0907008 dee98b40 005dc318 00000000 c0196b9b 00000000 00000000
1f80: dee98b40 7aeab3be 00000074 005dc318 b6f3bdb0 00000004 c0101224 dc1a0000
1fa0: 00000004 c0101001 00000074 005dc318 00000001 005dc318 00000007 00000000
1fc0: 00000074 005dc318 b6f3bdb0 00000004 00000007 00000007 00000000 00000000
1fe0: 00000004 be800880 b6ed35b3 b6e5c746 60030030 00000001 00000000 00000000
[<bf8000e2>] (tcpm_try_role [tcpm]) from [<c03fb4a7>] (preferred_role_store+0x2b/0x5c)
[<c03fb4a7>] (preferred_role_store) from [<c01e1e03>] (kernfs_fop_write+0xa7/0x150)
[<c01e1e03>] (kernfs_fop_write) from [<c0194e8b>] (__vfs_write+0x1f/0x104)
[<c0194e8b>] (__vfs_write) from [<c01969f7>] (vfs_write+0x6b/0x104)
[<c01969f7>] (vfs_write) from [<c0196b9b>] (ksys_write+0x43/0x94)
[<c0196b9b>] (ksys_write) from [<c0101001>] (ret_fast_syscall+0x1/0x62)

Since commit 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd
config from device properties"), the 'config' pointer in struct tcpc_dev
is optional when registering a Type-C port. Since it is optional, we have
to check if it is NULL before dereferencing it.

Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Fixes: 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd config from device properties")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/1563979112-22483-1-git-send-email-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: remove tcpm dir if no children

commit 12ca7297b8855c0af1848503d37196159b24e6b9 upstream.

If config tcpm as module, module unload will not remove tcpm dir,
then the next module load will have problem: the rootdir is NULL
but tcpm dir is still there, so tcpm_debugfs_init() will create
tcpm dir again with failure, fix it by remove the tcpm dir if no
children.

Cc: stable@vger.kernel.org # v4.15+
Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging")
Signed-off-by: Li Jun <jun.li@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190717080646.30421-2-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: free log buf memory when remove debug file

commit fd5da3e2cc61b4a7c877172fdc9348c82cf6ccfc upstream.

The logbuffer memory should be freed when remove debug file.

Cc: stable@vger.kernel.org # v4.15+
Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging")
Signed-off-by: Li Jun <jun.li@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190717080646.30421-1-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: yurex: Fix use-after-free in yurex_delete

commit fc05481b2fcabaaeccf63e32ac1baab54e5b6963 upstream.

syzbot reported the following crash [0]:

BUG: KASAN: use-after-free in usb_free_coherent+0x79/0x80
drivers/usb/core/usb.c:928
Read of size 8 at addr ffff8881b18599c8 by task syz-executor.4/16007

CPU: 0 PID: 16007 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #23
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928
  yurex_delete+0x138/0x330 drivers/usb/misc/yurex.c:100
  kref_put include/linux/kref.h:65 [inline]
  yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392
  __fput+0x2d7/0x840 fs/file_table.c:280
  task_work_run+0x13f/0x1c0 kernel/task_work.c:113
  tracehook_notify_resume include/linux/tracehook.h:188 [inline]
  exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163
  prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
  do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x413511
Code: 75 14 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 1b 00 00 c3 48
83 ec 08 e8 0a fc ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48
89 c2 e8 53 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:00007ffc424ea2e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000413511
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006
RBP: 0000000000000001 R08: 0000000029a2fc22 R09: 0000000029a2fc26
R10: 00007ffc424ea3c0 R11: 0000000000000293 R12: 000000000075c9a0
R13: 000000000075c9a0 R14: 0000000000761938 R15: ffffffffffffffff

Allocated by task 2776:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_kmalloc mm/kasan/common.c:487 [inline]
  __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460
  kmalloc include/linux/slab.h:552 [inline]
  kzalloc include/linux/slab.h:748 [inline]
  usb_alloc_dev+0x51/0xf95 drivers/usb/core/usb.c:583
  hub_port_connect drivers/usb/core/hub.c:5004 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x15c0/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 16007:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449
  slab_free_hook mm/slub.c:1423 [inline]
  slab_free_freelist_hook mm/slub.c:1470 [inline]
  slab_free mm/slub.c:3012 [inline]
  kfree+0xe4/0x2f0 mm/slub.c:3953
  device_release+0x71/0x200 drivers/base/core.c:1064
  kobject_cleanup lib/kobject.c:693 [inline]
  kobject_release lib/kobject.c:722 [inline]
  kref_put include/linux/kref.h:65 [inline]
  kobject_put+0x171/0x280 lib/kobject.c:739
  put_device+0x1b/0x30 drivers/base/core.c:2213
  usb_put_dev+0x1f/0x30 drivers/usb/core/usb.c:725
  yurex_delete+0x40/0x330 drivers/usb/misc/yurex.c:95
  kref_put include/linux/kref.h:65 [inline]
  yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392
  __fput+0x2d7/0x840 fs/file_table.c:280
  task_work_run+0x13f/0x1c0 kernel/task_work.c:113
  tracehook_notify_resume include/linux/tracehook.h:188 [inline]
  exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163
  prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
  do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881b1859980
  which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 72 bytes inside of
  2048-byte region [ffff8881b1859980, ffff8881b185a180)
The buggy address belongs to the page:
page:ffffea0006c61600 refcount:1 mapcount:0 mapping:ffff8881da00c000
index:0x0 compound_mapcount: 0
flags: 0x200000000010200(slab|head)
raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da00c000
raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8881b1859880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff8881b1859900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> ffff8881b1859980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                               ^
  ffff8881b1859a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881b1859a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

A quick look at the yurex_delete() shows that we drop the reference
to the usb_device before releasing any buffers associated with the
device. Delay the reference drop until we have finished the cleanup.

[0] https://lore.kernel.org/lkml/0000000000003f86d8058f0bd671@google.com/

Fixes: 6bc235a2e24a5e ("USB: add driver for Meywa-Denki & Kayac YUREX")
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: andreyknvl@google.com
Cc: gregkh@linuxfoundation.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: syzkaller-bugs@googlegroups.com
Cc: dtor@chromium.org
Reported-by: syzbot+d1fedb1c1fdb07fca507@syzkaller.appspotmail.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190805111528.6758-1-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-rcar: Fix timeout in xhci_suspend()

commit 783bda5e41acc71f98336e1a402c180f9748e5dc upstream.

When a USB device is connected to the host controller and
the system enters suspend, the following error happens
in xhci_suspend():

xhci-hcd ee000000.usb: WARN: xHC CMD_RUN timeout

Since the firmware/internal CPU control the USBSTS.STS_HALT
and the process speed is down when the roothub port enters U3,
long delay for the handshake of STS_HALT is neeed in xhci_suspend().
So, this patch adds to set the XHCI_SLOW_SUSPEND.

Fixes: 435cc1138ec9 ("usb: host: xhci-plat: set resume_quirk() for R-Car controllers")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1564734815-17964-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: gfs2_walk_metadata fix

commit a27a0c9b6a208722016c8ec5ad31ec96082b91ec upstream.

It turns out that the current version of gfs2_metadata_walker suffers
from multiple problems that can cause gfs2_hole_size to report an
incorrect size.  This will confuse fiemap as well as lseek with the
SEEK_DATA flag.

Fix that by changing gfs2_hole_walker to compute the metapath to the
first data block after the hole (if any), and compute the hole size
based on that.

Fixes xfstest generic/490.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS

commit b059f801a937d164e03b33c1848bb3dca67c0b04 upstream.

KBUILD_CFLAGS is very carefully built up in the top level Makefile,
particularly when cross compiling or using different build tools.
Resetting KBUILD_CFLAGS via := assignment is an antipattern.

The comment above the reset mentions that -pg is problematic.  Other
Makefiles use `CFLAGS_REMOVE_file.o = $(CC_FLAGS_FTRACE)` when
CONFIG_FUNCTION_TRACER is set. Prefer that pattern to wiping out all of
the important KBUILD_CFLAGS then manually having to re-add them. Seems
also that __stack_chk_fail references are generated when using
CONFIG_STACKPROTECTOR or CONFIG_STACKPROTECTOR_STRONG.

Fixes: 8fc5b4d4121c ("purgatory: core purgatory functionality")
Reported-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190807221539.94583-2-ndesaulniers@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf record: Fix module size on s390

commit 12a6d2940b5f02b4b9f71ce098e3bb02bc24a9ea upstream.

On s390 the modules loaded in memory have the text segment located after
the GOT and Relocation table. This can be seen with this output:

  [root@m35lp76 perf]# fgrep qeth /proc/modules
  qeth 151552 1 qeth_l2, Live 0x000003ff800b2000
  ...
  [root@m35lp76 perf]# cat /sys/module/qeth/sections/.text
  0x000003ff800b3990
  [root@m35lp76 perf]#

There is an offset of 0x1990 bytes. The size of the qeth module is
151552 bytes (0x25000 in hex).

The location of the GOT/relocation table at the beginning of a module is
unique to s390.

commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map")
adjusts the start address of a module in the map structures, but does
not adjust the size of the modules. This leads to overlapping of module
maps as this example shows:

[root@m35lp76 perf] # ./perf report -D
     0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000)
          @ 0]:  x /lib/modules/.../qeth.ko.xz
     0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000)
          @ 0]:  x /lib/modules/.../ip6_tables.ko.xz

The module qeth.ko has an adjusted start address modified to b3990, but
its size is unchanged and the module ends at 0x3ff800d8990.  This end
address overlaps with the next modules start address of 0x3ff800d85a0.

When the size of the leading GOT/Relocation table stored in the
beginning of the text segment (0x1990 bytes) is subtracted from module
qeth end address, there are no overlaps anymore:

   0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000

which is the same as

   0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000.

To fix this issue, also adjust the modules size in function
arch__fix_module_text_start(). Add another function parameter named size
and reduce the size of the module when the text segment start address is
changed.

Output after:
     0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670)
          @ 0]:  x /lib/modules/.../qeth.ko.xz
     0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60)
          @ 0]:  x /lib/modules/.../ip6_tables.ko.xz

Reported-by: Stefan Liebler <stli@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map")
Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf db-export: Fix thread__exec_comm()

commit 3de7ae0b2a1d86dbb23d0cb135150534fdb2e836 upstream.

Threads synthesized from /proc have comms with a start time of zero, and
not marked as "exec". Currently, there can be 2 such comms. The first is
created by processing a synthesized fork event and is set to the
parent's comm string, and the second by processing a synthesized comm
event set to the thread's current comm string.

In the absence of an "exec" comm, thread__exec_comm() picks the last
(oldest) comm, which, in the case above, is the parent's comm string.
For a main thread, that is very probably wrong. Use the second-to-last
in that case.

This affects only db-export because it is the only user of
thread__exec_comm().

Example:

  $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1
  $ sudo chown ahunter pt-a-sleep-1

Before:

  $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls
  $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view'
  comm_id     command     thread_id   pid         tid
  ----------  ----------  ----------  ----------  ----------
  1           swapper     1           0           0
  2           rcu_sched   2           10          10
  3           kthreadd    3           78          78
  5           sudo        4           15180       15180
  5           sudo        5           15180       15182
  7           kworker/4:  6           10335       10335
  8           kthreadd    7           55          55
  10          systemd     8           865         865
  10          systemd     9           865         875
  13          perf        10          15181       15181
  15          sleep       10          15181       15181
  16          kworker/3:  11          14179       14179
  17          kthreadd    12          29376       29376
  19          systemd     13          746         746
  21          systemd     14          401         401
  23          systemd     15          879         879
  23          systemd     16          879         945
  25          kthreadd    17          556         556
  27          kworker/u1  18          14136       14136
  28          kworker/u1  19          15021       15021
  29          kthreadd    20          509         509
  31          systemd     21          836         836
  31          systemd     22          836         967
  33          systemd     23          1148        1148
  33          systemd     24          1148        1163
  35          kworker/2:  25          17988       17988
  36          kworker/0:  26          13478       13478

After:

  $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls
  $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view'
  comm_id     command     thread_id   pid         tid
  ----------  ----------  ----------  ----------  ----------
  1           swapper     1           0           0
  2           rcu_sched   2           10          10
  3           kswapd0     3           78          78
  4           perf        4           15180       15180
  4           perf        5           15180       15182
  6           kworker/4:  6           10335       10335
  7           kcompactd0  7           55          55
  8           accounts-d  8           865         865
  8           accounts-d  9           865         875
  10          perf        10          15181       15181
  12          sleep       10          15181       15181
  13          kworker/3:  11          14179       14179
  14          kworker/1:  12          29376       29376
  15          haveged     13          746         746
  16          systemd-jo  14          401         401
  17          NetworkMan  15          879         879
  17          NetworkMan  16          879         945
  19          irq/131-iw  17          556         556
  20          kworker/u1  18          14136       14136
  21          kworker/u1  19          15021       15021
  22          kworker/u1  20          509         509
  23          thermald    21          836         836
  23          thermald    22          836         967
  25          unity-sett  23          1148        1148
  25          unity-sett  24          1148        1163
  27          kworker/2:  25          17988       17988
  28          kworker/0:  26          13478       13478

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec")
Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf annotate: Fix s390 gap between kernel end and module start

commit b9c0a64901d5bdec6eafd38d1dc8fa0e2974fccb upstream.

During execution of command 'perf top' the error message:

   Not enough memory for annotating '__irf_end' symbol!)

is emitted from this call sequence:
  __cmd_top
    perf_top__mmap_read
      perf_top__mmap_read_idx
        perf_event__process_sample
          hist_entry_iter__add
            hist_iter__top_callback
              perf_top__record_precise_ip
                hist_entry__inc_addr_samples
                  symbol__inc_addr_samples
                    symbol__get_annotation
                      symbol__alloc_hist

In this function the size of symbol __irf_end is calculated. The size of
a symbol is the difference between its start and end address.

When the symbol was read the first time, its start and end was set to:

   symbol__new: __irf_end 0xe954d0-0xe954d0

which is correct and maps with /proc/kallsyms:

   root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms
   0000000000e954d0 t __irf_end
   root@s8360046:~/linux-4.15.0/tools/perf#

In function symbol__alloc_hist() the end of symbol __irf_end is

  symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8

which is identical with the first module entry in /proc/kallsyms

This results in a symbol size of __irf_req for histogram analyses of
70334140059072 bytes and a malloc() for this requested size fails.

The root cause of this is function
  __dso__load_kallsyms()
  +-> symbols__fixup_end()

Function symbols__fixup_end() enlarges the last symbol in the kallsyms
map:

   # fgrep __irf_end /proc/kallsyms
   0000000000e954d0 t __irf_end
   #

to the start address of the first module:
   # cat /proc/kallsyms | sort  | egrep ' [tT] '
   ....
   0000000000e952d0 T __security_initcall_end
   0000000000e954d0 T __initramfs_size
   0000000000e954d0 t __irf_end
   000003ff800045a8 T fc_get_event_number       [scsi_transport_fc]
   000003ff800045d0 t store_fc_vport_disable    [scsi_transport_fc]
   000003ff800046a8 T scsi_is_fc_rport  [scsi_transport_fc]
   000003ff800046d0 t fc_target_setup   [scsi_transport_fc]

On s390 the kernel is located around memory address 0x200, 0x10000 or
0x100000, depending on linux version. Modules however start some- where
around 0x3ff xxxx xxxx.

This is different than x86 and produces a large gap for which histogram
allocation fails.

Fix this by detecting the kernel's last symbol and do no adjustment for
it. Introduce a weak function and handle s390 specifics.

Reported-by: Klaus Theurich <klaus.theurich@de.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190724122703.3996-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()

commit 3f8fd02b1bf1d7ba964485a56f2f4b53ae88c167 upstream.

On x86-32 with PTI enabled, parts of the kernel page-tables are not shared
between processes. This can cause mappings in the vmalloc/ioremap area to
persist in some page-tables after the region is unmapped and released.

When the region is re-used the processes with the old mappings do not fault
in the new mappings but still access the old ones.

This causes undefined behavior, in reality often data corruption, kernel
oopses and panics and even spontaneous reboots.

Fix this problem by activly syncing unmaps in the vmalloc/ioremap area to
all page-tables in the system before the regions can be re-used.

References: https://bugzilla.suse.com/show_bug.cgi?id=1118689
Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20190719184652.11391-4-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Sync also unmappings in vmalloc_sync_all()

commit 8e998fc24de47c55b47a887f6c95ab91acd4a720 upstream.

With huge-page ioremap areas the unmappings also need to be synced between
all page-tables. Otherwise it can cause data corruption when a region is
unmapped and later re-used.

Make the vmalloc_sync_one() function ready to sync unmappings and make sure
vmalloc_sync_all() iterates over all page-tables even when an unmapped PMD
is found.

Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20190719184652.11391-3-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Check for pfn instead of page in vmalloc_sync_one()

commit 51b75b5b563a2637f9d8dc5bd02a31b2ff9e5ea0 upstream.

Do not require a struct page for the mapped memory location because it
might not exist. This can happen when an ioremapped region is mapped with
2MB pages.

Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20190719184652.11391-2-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - enable RMI mode for HP Spectre X360

commit 25f8c834e2a6871920cc1ca113f02fb301d007c3 upstream.

The 2016 kabylake HP Spectre X360 (model number 13-w013dx) works much better
with psmouse.synaptics_intertouch=1 kernel parameter, so let's enable RMI4
mode automatically.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204115
Reported-by: Nate Graham <pointedstick@zoho.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elantech - enable SMBus on new (2018+) systems

commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c upstream.

There are some new HP laptops with Elantech touchpad that don't support
multitouch.

Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is supported,
but in addition to firmware version, the bus type also informs us whether the IC
can support SMBus. To avoid breaking old ICs, we will only enable SMbus support
based the bus type on systems manufactured after 2018.

Lastly, let's consolidate all checks into elantech_use_host_notify() and use it
to determine whether to use PS/2 or SMBus.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: usbtouchscreen - initialize PM mutex before using it

commit b55d996f057bf2e7ba9422a80b5e17e99860cb0b upstream.

Mutexes shall be initialized before they are used.

Fixes: 12e510dbc57b2 ("Input: usbtouchscreen - fix deadlock in autosuspend")
Reported-by: syzbot+199ea16c7f26418b4365@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: set PF_MEMALLOC_NOIO for the worker thread

commit d0a255e795ab976481565f6ac178314b34fbf891 upstream.

A deadlock with this stacktrace was observed.

The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio
shrinker and the shrinker depends on I/O completion in the dm-bufio
subsystem.

In order to fix the deadlock (and other similar ones), we set the flag
PF_MEMALLOC_NOIO at loop thread entry.

PID: 474    TASK: ffff8813e11f4600  CPU: 10  COMMAND: "kswapd0"
   #0 [ffff8813dedfb938] __schedule at ffffffff8173f405
   #1 [ffff8813dedfb990] schedule at ffffffff8173fa27
   #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec
   #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186
   #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f
   #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8
   #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81
   #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio]
   #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio]
   #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio]
  #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce
  #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778
  #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f
  #13 [ffff8813dedfbec0] kthread at ffffffff810a8428
  #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242

  PID: 14127  TASK: ffff881455749c00  CPU: 11  COMMAND: "loop1"
   #0 [ffff88272f5af228] __schedule at ffffffff8173f405
   #1 [ffff88272f5af280] schedule at ffffffff8173fa27
   #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e
   #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5
   #4 [ffff88272f5af330] mutex_lock at ffffffff81742133
   #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio]
   #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd
   #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778
   #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34
   #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8
  #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3
  #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71
  #12 [ffff88272f5af760] new_slab at ffffffff811f4523
  #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5
  #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b
  #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3
  #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3
  #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs]
  #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994
  #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs]
  #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop]
  #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop]
  #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c
  #23 [ffff88272f5afec0] kthread at ffffffff810a8428
  #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: cavium: Add the missing dma unmap when the dma has finished.

commit b803974a86039913d5280add083d730b2b9ed8ec upstream.

This fixes the below calltrace when the CONFIG_DMA_API_DEBUG is enabled.
  DMA-API: thunderx_mmc 0000:01:01.4: cpu touching an active dma mapped cacheline [cln=0x000000002fdf9800]
  WARNING: CPU: 21 PID: 1 at kernel/dma/debug.c:596 debug_dma_assert_idle+0x1f8/0x270
  Modules linked in:
  CPU: 21 PID: 1 Comm: init Not tainted 5.3.0-rc1-next-20190725-yocto-standard+ #64
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  pstate: 80400009 (Nzcv daif +PAN -UAO)
  pc : debug_dma_assert_idle+0x1f8/0x270
  lr : debug_dma_assert_idle+0x1f8/0x270
  sp : ffff0000113cfc10
  x29: ffff0000113cfc10 x28: 0000ffff8c880000
  x27: ffff800bc72a0000 x26: ffff000010ff8000
  x25: ffff000010ff8940 x24: ffff000010ff8968
  x23: 0000000000000000 x22: ffff000010e83700
  x21: ffff000010ea2000 x20: ffff000010e835c8
  x19: ffff800bc2c73300 x18: ffffffffffffffff
  x17: 0000000000000000 x16: 0000000000000000
  x15: ffff000010e835c8 x14: 6d20616d64206576
  x13: 69746361206e6120 x12: 676e696863756f74
  x11: 20757063203a342e x10: 31303a31303a3030
  x9 : 303020636d6d5f78 x8 : 3230303030303030
  x7 : 00000000000002fd x6 : ffff000010fd57d0
  x5 : 0000000000000000 x4 : ffff0000106c5210
  x3 : 00000000ffffffff x2 : 0000800bee9c0000
  x1 : 57d5843f4aa62800 x0 : 0000000000000000
  Call trace:
   debug_dma_assert_idle+0x1f8/0x270
   wp_page_copy+0xb0/0x688
   do_wp_page+0xa8/0x5b8
   __handle_mm_fault+0x600/0xd00
   handle_mm_fault+0x118/0x1e8
   do_page_fault+0x200/0x500
   do_mem_abort+0x50/0xb0
   el0_da+0x20/0x24
  ---[ end trace a005534bd23e109f ]---
  DMA-API: Mapped at:
   debug_dma_map_sg+0x94/0x350
   cvm_mmc_request+0x3c4/0x988
   __mmc_start_request+0x9c/0x1f8
   mmc_start_request+0x7c/0xb0
   mmc_blk_mq_issue_rq+0x5c4/0x7b8

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: cavium: Set the correct dma max segment size for mmc_host

commit fa25eba6993b3750f417baabba169afaba076178 upstream.

We have set the mmc_host.max_seg_size to 8M, but the dma max segment
size of PCI device is set to 64K by default in function pci_device_add().
The mmc_host.max_seg_size is used to set the max segment size of
the blk queue. Then this mismatch will trigger a calltrace like below
when a bigger than 64K segment request arrives at mmc dev. So we should
consider the limitation of the cvm_mmc_host when setting the
mmc_host.max_seg_size.
  DMA-API: thunderx_mmc 0000:01:01.4: mapping sg segment longer than device claims to support [len=131072] [max=65536]
  WARNING: CPU: 6 PID: 238 at kernel/dma/debug.c:1221 debug_dma_map_sg+0x2b8/0x350
  Modules linked in:
  CPU: 6 PID: 238 Comm: kworker/6:1H Not tainted 5.3.0-rc1-next-20190724-yocto-standard+ #62
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  Workqueue: kblockd blk_mq_run_work_fn
  pstate: 80c00009 (Nzcv daif +PAN +UAO)
  pc : debug_dma_map_sg+0x2b8/0x350
  lr : debug_dma_map_sg+0x2b8/0x350
  sp : ffff00001770f9e0
  x29: ffff00001770f9e0 x28: ffffffff00000000
  x27: 00000000ffffffff x26: ffff800bc2c73180
  x25: ffff000010e83700 x24: 0000000000000002
  x23: 0000000000000001 x22: 0000000000000001
  x21: 0000000000000000 x20: ffff800bc48ba0b0
  x19: ffff800bc97e8c00 x18: ffffffffffffffff
  x17: 0000000000000000 x16: 0000000000000000
  x15: ffff000010e835c8 x14: 6874207265676e6f
  x13: 6c20746e656d6765 x12: 7320677320676e69
  x11: 7070616d203a342e x10: 31303a31303a3030
  x9 : 303020636d6d5f78 x8 : 35363d78616d5b20
  x7 : 00000000000002fd x6 : ffff000010fd57dc
  x5 : 0000000000000000 x4 : ffff0000106c61f0
  x3 : 00000000ffffffff x2 : 0000800bee060000
  x1 : 7010678df3041a00 x0 : 0000000000000000
  Call trace:
   debug_dma_map_sg+0x2b8/0x350
   cvm_mmc_request+0x3c4/0x988
   __mmc_start_request+0x9c/0x1f8
   mmc_start_request+0x7c/0xb0
   mmc_blk_mq_issue_rq+0x5c4/0x7b8
   mmc_mq_queue_rq+0x11c/0x278
   blk_mq_dispatch_rq_list+0xb0/0x568
   blk_mq_do_dispatch_sched+0x6c/0x108
   blk_mq_sched_dispatch_requests+0x110/0x1b8
   __blk_mq_run_hw_queue+0xb0/0x118
   blk_mq_run_work_fn+0x28/0x38
   process_one_work+0x210/0x490
   worker_thread+0x48/0x458
   kthread+0x130/0x138
   ret_from_fork+0x10/0x1c

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sound: fix a memory leak bug

commit c7cd7c748a3250ca33509f9235efab9c803aca09 upstream.

In sound_insert_unit(), the controlling structure 's' is allocated through
kmalloc(). Then it is added to the sound driver list by invoking
__sound_insert_unit(). Later on, if __register_chrdev() fails, 's' is
removed from the list through __sound_remove_unit(). If 'index' is not less
than 0, -EBUSY is returned to indicate the error. However, 's' is not
deallocated on this execution path, leading to a memory leak bug.

To fix the above issue, free 's' before -EBUSY is returned.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: iowarrior: fix deadlock on disconnect

commit c468a8aa790e0dfe0a7f8a39db282d39c2c00b46 upstream.

We have to drop the mutex before we close() upon disconnect()
as close() needs the lock. This is safe to do by dropping the
mutex as intfdata is already set to NULL, so open() will fail.

Fixes: 03f36e885fc26 ("USB: open disconnect race in iowarrior")
Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190808092728.23417-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: usbfs: fix double-free of usb memory upon submiturb error

commit c43f28dfdc4654e738aa6d3fd08a105b2bee758d upstream.

Upon an error within proc_do_submiturb(), dec_usb_memory_use_count()
gets called once by the error handling tail and again by free_async().
Remove the first call.

Signed-off-by: Gavin Li <git@thegavinli.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190804235044.22327-1-gavinli@thegavinli.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - Ignore tag length when decrypting GCM ciphertext

commit e2664ecbb2f26225ac6646876f2899558ffb2604 upstream.

AES GCM input buffers for decryption contain AAD+CTEXT+TAG. Only
decrypt the ciphertext, and use the tag for comparison.

Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - Add support for valid authsize values less than 16

commit 9f00baf74e4b6f79a3a3dfab44fb7bb2e797b551 upstream.

AES GCM encryption allows for authsize values of 4, 8, and 12-16 bytes.
Validate the requested authsize, and retain it to save in the request
context.

Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - Fix oops by properly managing allocated structures

commit 25e44338321af545ab34243a6081c3f0fc6107d0 upstream.

A plaintext or ciphertext length of 0 is allowed in AES, in which case
no encryption occurs. Ensure that we don't clean up data structures
that were never allocated.

Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Bail out upon SIGKILL when allocating memory.

commit 8f9e86ee795971eabbf372e6d804d6b8578287a7 upstream.

syzbot found that a thread can stall for minutes inside
ion_system_heap_allocate() after that thread was killed by SIGKILL [1].
Let's check for SIGKILL before doing memory allocation.

[1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://lore.kernel.org/r/d088f188-5f32-d8fc-b9a0-0b404f7501cc@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gasket: apex: fix copy-paste typo

commit 66665bb9979246729562a09fcdbb101c83127989 upstream.

In sysfs_show() case-branches ATTR_KERNEL_HIB_PAGE_TABLE_SIZE and
ATTR_KERNEL_HIB_SIMPLE_PAGE_TABLE_SIZE do the same. It looks like
copy-paste mistake.

Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190710204518.16814-1-brnkv.i1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: max9611: Fix misuse of GENMASK macro

commit ae8cc91a7d85e018c0c267f580820b2bb558cd48 upstream.

Arguments are supposed to be ordered high then low.

Signed-off-by: Joe Perches <joe@perches.com>
Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: cros_ec_accel_legacy: Fix incorrect channel setting

commit 6cdff99c9f7d7d28b87cf05dd464f7c7736332ae upstream.

INFO_SCALE is set both for each channel and all channels.
iio is using all channel setting, so the error was not user visible.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.66

spi: bcm2835: Fix 3-wire mode if DMA is enabled

commit 8d8bef50365847134b51c1ec46786bc2873e4e47 upstream.

Commit 6935224da248 ("spi: bcm2835: enable support of 3-wire mode")
added 3-wire support to the BCM2835 SPI driver by setting the REN bit
(Read Enable) in the CS register when receiving data.  The REN bit puts
the transmitter in high-impedance state.  The driver recognizes that
data is to be received by checking whether the rx_buf of a transfer is
non-NULL.

Commit 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers
meeting certain conditions") subsequently broke 3-wire support because
it set the SPI_MASTER_MUST_RX flag which causes spi_map_msg() to replace
rx_buf with a dummy buffer if it is NULL.  As a result, rx_buf is
*always* non-NULL if DMA is enabled.

Reinstate 3-wire support by not only checking whether rx_buf is non-NULL,
but also checking that it is not the dummy buffer.

Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions")
Reported-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.2+
Cc: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/328318841455e505370ef8ecad97b646c033dc8a.1562148527.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Fix css_task_iter_advance_css_set() cset skip condition

commit c596687a008b579c503afb7a64fcacc7270fae9e upstream.

While adding handling for dying task group leaders c03cd7738a83
("cgroup: Include dying leaders with live threads in PROCS
iterations") added an inverted cset skip condition to
css_task_iter_advance_css_set().  It should skip cset if it's
completely empty but was incorrectly testing for the inverse condition
for the dying_tasks list.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations")
Reported-by: syzbot+d4bba5ccd4f9a2a68681@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: css_task_iter_skip()'d iterators must be advanced before accessed

commit cee0c33c546a93957a52ae9ab6bebadbee765ec5 upstream.

b636fd38dc40 ("cgroup: Implement css_task_iter_skip()") introduced
css_task_iter_skip() which is used to fix task iterations skipping
dying threadgroup leaders with live threads.  Skipping is implemented
as a subportion of full advancing but css_task_iter_next() forgot to
fully advance a skipped iterator before determining the next task to
visit causing it to return invalid task pointers.

Fix it by making css_task_iter_next() fully advance the iterator if it
has been skipped since the previous iteration.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: syzbot
Link: http://lkml.kernel.org/r/00000000000097025d058a7fd785@google.com
Fixes: b636fd38dc40 ("cgroup: Implement css_task_iter_skip()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Include dying leaders with live threads in PROCS iterations

commit c03cd7738a83b13739f00546166969342c8ff014 upstream.

CSS_TASK_ITER_PROCS currently iterates live group leaders; however,
this means that a process with dying leader and live threads will be
skipped.  IOW, cgroup.procs might be empty while cgroup.threads isn't,
which is confusing to say the least.

Fix it by making cset track dying tasks and include dying leaders with
live threads in PROCS iteration.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Topi Miettinen <toiwoton@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Implement css_task_iter_skip()

commit b636fd38dc40113f853337a7d2a6885ad23b8811 upstream.

When a task is moved out of a cset, task iterators pointing to the
task are advanced using the normal css_task_iter_advance() call.  This
is fine but we'll be tracking dying tasks on csets and thus moving
tasks from cset->tasks to (to be added) cset->dying_tasks.  When we
remove a task from cset->tasks, if we advance the iterators, they may
move over to the next cset before we had the chance to add the task
back on the dying list, which can allow the task to escape iteration.

This patch separates out skipping from advancing.  Skipping only moves
the affected iterators to the next pointer rather than fully advancing
it and the following advancing will recognize that the cursor has
already been moved forward and do the rest of advancing.  This ensures
that when a task moves from one list to another in its cset, as long
as it moves in the right direction, it's always visible to iteration.

This doesn't cause any visible behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Call cgroup_release() before __exit_signal()

commit 6b115bf58e6f013ca75e7115aabcbd56c20ff31d upstream.

cgroup_release() calls cgroup_subsys->release() which is used by the
pids controller to uncharge its pid.  We want to use it to manage
iteration of dying tasks which requires putting it before
__unhash_process().  Move cgroup_release() above __exit_signal().
While this makes it uncharge before the pid is freed, pid is RCU freed
anyway and the window is very narrow.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>