Przemyslaw Marczak [Thu, 18 Sep 2014 14:20:29 +0000 (16:20 +0200)]
samsung:board: dram_init(): alloc memory to store fdt dram info
For CONFIG_OF_MULTI the dram_init() function gets memory information
from the device tree blob by the call to fdtdec_decode_memory().
The same is done second time in dram_init_banksize() - this was the
simplest because board info structure is not initialized at dram_init()
stage.
This change uses malloc and gd->priv pointer to store the memory banks
parameters and next uses it in dram_init_banksize().
Thanks to this change, the boot time decreases, because, the function
fdtdec_decode_memory() is called only once.
Change-Id: I8f357c6a641d4440f32d2fe24d7e1e2dc5bc4a3d
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 28 Jul 2014 15:43:23 +0000 (17:43 +0200)]
samsung:board: init dram info based on memory node in fdt
Change-Id: I3677f0ab0b4aed264de8af37e87b081f66a36b97
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 28 Jul 2014 09:16:47 +0000 (11:16 +0200)]
fdtdec: add function: fdtdec_decode_memory()
This function can be used for decode memory node from device tree file.
Currently supports decoding of a single memory node with a multiple ranges
specified by the reg property with size of address and size cells specified
in a root node.
Function parameters:
- blob: ptr to device tree
- start: ptr to banks start address array
- size: ptr to banks size array
- max_banks: max number of banks to fill
Two of args: start or size can be NULL e.g. if only each bank size is needed.
Sample use case:
memory {
device_type = "memory";
reg = <0x40000000 ... 0x10000000 ...
0x50000000 ... 0x10000000 ...
... ... ... ...>;
};
Change-Id: I2f3defb89cf62d81377fb7882dbbae79b4472af2
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 28 Jul 2014 09:00:34 +0000 (11:00 +0200)]
fdt_support: remove type static in fdt_read_prop()
Change-Id: Iaff9eff27dba6fc6f13d031a96f310361648acfd
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 23 Jul 2014 09:41:41 +0000 (11:41 +0200)]
arch:arm:dts: odroid/trats2: add memory device type
Change-Id: I80c42c8c390ccba1e748671b7f85d5b71371bbe9
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 7 Apr 2014 15:21:13 +0000 (17:21 +0200)]
samsung: misc: menu: new option: battery charge level
This change adds new option to lcd menu which allows
check battery state. In case if battery level is greater
than boot level threshold (20%), battery screen is not
displayed. So this menu option is useful in such situations.
Change-Id: I13e7e57516766fea787855b914d2884343cc33a5
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 25 Mar 2014 11:32:22 +0000 (12:32 +0100)]
trats2: enable command battery of interactive charger
This change adds two features on trats2 device:
- show battery charge level by displaying battery screen
- manually start interactive charger if needed
Usage:
command: "battery"
options: "state" or "charge"
Change-Id: Ie000edfc2fb6f2938ddf1e17611fdc5045169830
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 24 Mar 2014 09:40:12 +0000 (10:40 +0100)]
trats2: add support to interactive charger
This commit adds support to interactive charger api which means an
implementation of listed functions:
- charger_enable() - enable the charger.Charger can be enabled
automatically if the device power on state
is triggered by USB cable connection.
- charger_type() - this function returns device type connected
to usb port of device. For charger api matters
only positive value.
- battery_present() - check if battery is connected (DETBAT pin)
- battery_state() - check battery charge level. Returns percent value.
- low_power_mode() - switch SOC into low power mode which covers:
- disable cores: 1, 2, 3,
- disable SOC unused power domains,
- decrease CPU clock to 200 MHz
After low_power_mode() function call, device should be restarted,
which is implemented in interactive charger.
Change-Id: I7e664fab29c45c2d29dc57a2faa887d88530d8f3
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 25 Mar 2014 11:27:05 +0000 (12:27 +0100)]
samsung: misc: new command: battery and config CONFIG_CMD_BATTERY
This feature allows to enable interactive charger by command line
or use interactive charger for display battery charge level.
Usage:
- battery [<state>] [<charge>]
Option "state" will display battery screen for 2 seconds.
Option "charge" will start interactive charger mode.
Interactive charger mode can be stopped by:
- pressing CTRL+C keys combination,
or device reset by:
- pressing PWR key for 5 seconds (only if SOC > 20% - one grey bar),
- pressing PWR key for 10 seconds, which is PMIC reset.
Change-Id: I622830198f6cba4f0fa30798b02aa003c55332bb
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 21 Mar 2014 15:15:50 +0000 (16:15 +0100)]
samsung: misc: new feature: common interactive charger
This change adds common interactive charger feature with
display support.
New config: CONFIG_INTERACTIVE_CHARGER
New functions:
- battery() - which takes one of commands parameter:
BOOT_CHECK: check battery present, low power mode;
check battery charge level, draw battery screen
STATE: display battery screen with current state of charge
this is for command line use
CHARGE: start interactive charger for every battery charge level
this is also for command line use
- interactive_charger() - loop function for charge the battery and do:
- update of battery screen,
- update charge animation,
- check for exit condition (if charge level >= 20%)
- clear screen after 10 seconds animation
- draw battery on clean screen if any key pressed
There are few constants defined for this feature:
- CHARGE_TRESHOLD_BOOT: 20 (20 percent of charge)
- CHARGE_DISPLAY_TIMEOUT_SEC: 10 (time for animation display)
- CONNECT_CHARGER_TIMEOUT_SEC: 5 (time for connect charger animation)
- CHARGE_PWR_KEY_RESET_TIMEOUT: 3 (time for PWR key press to reset device)
Battery charge level cases:
- 0-20 % - don't allow to boot and then:
- enable charger if connected and start charge animation
or if no charger:
- display 5 sec charger animation and turn off the device
- > 20 % - don't display battery screen and boot device
Charge mode can be break by keys VOLUP + VOLDOWN. If charge level > 20%
then device can be enabled by pressing PWR key for a time defined in
CHARGE_PWR_KEY_RESET_TIMEOUT.
Change-Id: I15066a4b86c89f1f0124b072a0aeb7246b29b279
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 24 Mar 2014 14:26:10 +0000 (15:26 +0100)]
lib: tizen: add battery interactive charger screens
New images:
- battery frame: 200x380px, 16bpp,
batery level area in frame: 170x300px
- battery bar: 160x50px, 16bpp, grey and red,
(for 5 bars in battery frame with 8px interelement gap)
- charge screen; charge screen clean images: 128x120px, 16bpp
- charge screen indicator; vertical and horizontal
indicator clean images: 8x8px, 16bpp
Library functions:
For battery screen:
- draw_battery_screen() - draw empty battery frame
- draw_battery_state() - fill battery frame with charge bars
to a given percent
For charge animation:
- draw_charge_screen() - draw a small phone connected to a cable
(under the battery)
- clean_charge_screen() - cleans above screen
- draw_charge_animation() - display an animation with
a point running on a cable
(on a charge screen)
For low battery state and no charger connected:
- draw_connect_charger_animation() - draw and clean charge
screen respectively
Library is ready to use gzipped images
but this commit adds only bmp images.
Changes for v2015.10-rc5:
- correct usage of removed typedef 'bmp_image_t'
Change-Id: I25a527b07b809b9105b6d4d8c29aa01e47224134
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 21 Mar 2014 10:48:54 +0000 (11:48 +0100)]
trats2: add implementation of board_poweroff() and CONFIG_CMD_POWEROFF
This change adds implementation of function board_poweroff() which
turns off the device off by setting PSHOLD gpio to low state which
is a power off signal for main PMIC.
Change-Id: Iae97fb81d7e7e243079ac18d03f4fd917c50b62e
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 23 Apr 2014 12:57:19 +0000 (14:57 +0200)]
arch:arch:exynos: add exynos ps hold control output setting
Change-Id: I4ee074278c55198030aa5092f36e61e3c6efc487
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 26 Mar 2014 15:00:54 +0000 (16:00 +0100)]
arch:arm:exynos: power.h define exynos4x12 power subsystem structure
Change-Id: Icf6cb80529f3fb5511e440f572e0870359e6e37c
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 9 Jun 2014 06:25:09 +0000 (08:25 +0200)]
common: add command power off - to switch off the device by command
This change introduces new config:
- CONFIG_CMD_POWEROFF - which enables cmd/poweroff.c
This requires implementation of function board_poweroff() which
is yet declared in include/common.h
Implementation of board_poweroff() should:
1.a. turn off the device
or
1.b. print info to user about turn off ability
2. never back to caller
Usage is simple: "power off"
Changed for v2016.03:
- Relocated from common directory to cmd directory
- Renamed from cmd_poweroff to poweroff
Change-Id: Ia5fe73250e2ac29d0868b80bcd867bae2aa8d5be
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Chanho Park [Fri, 10 Jan 2014 01:48:52 +0000 (10:48 +0900)]
packaging: Adding .spec file for u-boot project
Change-Id: I5dd90f728a9f0f951afda5634f2509cbb3eccc95
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Jacek Pielaszkiewicz <j.pielaszkie@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
Lukasz Majewski [Tue, 25 Mar 2014 16:33:34 +0000 (17:33 +0100)]
tools: dtc: Add source to build the dtc compiler
Newest u-boot (v2014.04) requires device tree compiler (DTC) version
at least 1.4.
Change-Id: Ie62778e3391cbf3b586221839cf53362c5f8cdff
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Inha Song [Fri, 21 Feb 2014 17:55:15 +0000 (18:55 +0100)]
trats/trats2: enable bootloader signature
Enable of this config will now require making binary signature.
From now, manually build sequence should looks like this:
CROSS_COMPILE=...
make mrproper
make trats2_config
make
./tools/mkimage_signed.sh u-boot-dtb.bin trats2_config
The output signed binary is: u-boot-mmc.bin
Change-Id: I9a2c86d2f24a050ff3738adb9dbd7d5914ff16d8
Signed-off-by: Inha Song <ideal.song@samsung.com>
Inha Song [Mon, 28 Oct 2013 06:52:53 +0000 (15:52 +0900)]
gadged: thor: add board signature check when download 'u-boot-mmc.bin'
This patch adds checking the special signature of downloaded U-Boot binary.
The new function check_board_signature() is called before do dfu_write()
in thor gadged code.
The board signature is checked for:
- the running U-Boot
- downloaded 'u-boot-mmc.bin'
at offset of binary start defined by:
- (CONFIG_SIGN_IMAGE_SIZE - HDR_SIZE)
The download can succeed when signatures are equal.
The default U-Boot image size defined by CONFIG_SIGN_IMAGE_SIZE is 1MB.
Other changes:
- print info about running/downloading U-Boot signature
- print info about wrong image signature/size
- don't allow downloading unsigned or signed wrong U-Boot image
- allow download any image if no signature found at running U-Boot
The first version added by:
Signed-off-by: Inha Song <ideal.song@samsung.com>
Upgrade:
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 10 Apr 2014 13:03:40 +0000 (15:03 +0200)]
tools: add script: mkimage_signed.sh for sign u-boot binary
This script appends given binary image by signature header.
Script takes two arguments:
- @arg1: binary name
- @arg2: config name
Script usage:
./mkimage_signed.sh binary.img config_name
e.g.:
./mkimage_signed.sh u-boot-dtb.bin trats2_config
Sign header is stored on last 512 bytes of input binary.
Maximum imput binary size is 1MB - 512 Bytes = 1048064 Bytes.
The maximum size is limited by first bootloader (s-boot).
Now it is configured to load exactly 2048 blocks (1MB).
Current u-boot-dtb.bin size for trats2 is less than 600 KBytes,
so the size limit should not be an issue.
Change-Id: Ia7472be693df8d4135312971d963d27f2ea20f0f
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 2 Apr 2014 14:13:59 +0000 (16:13 +0200)]
lib: tizen: thor screen update
Now cable connection message is displayed on thor screen.
When cable is connected then only unneeded lcd console lines are overwritten.
Main changes:
- add new function: draw_thor_connected()
- update function draw_thor_screen()
- usb: gadget: thor:
- move call to draw_thor_screen(),
- add call to draw_thor_connected()
other change:
- remove draw_thor_init_screen() function
Changes for v2015.04-rc1:
- Replace <lcd.h> to <lcd_console.h>
Changes for v2015.10-rc5
- correct usage of removed typedef 'bmp_image_t'
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Inha Song [Fri, 11 Oct 2013 08:50:24 +0000 (17:50 +0900)]
usb: thor: add screen support
cmd_thordown.c:
- add libtizen header
- change error handling for thor init
- add call to draw_thor_fail_screen() on error
f_thor.c:
- thor_init(): return -EINTR on ctrl+c or if power key was pressed 3 times
- thor_rx_data(): return -EINTR when pressed ctrl+c on data receiving
- add display simple info screen before cable is not connected
- add display download screen when connection is established
- update download progress bar if data receiving
Change-Id: Ia89ef48c6c2faa5eda5dda5c5b3951e675eec03b
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 10 Feb 2014 15:28:30 +0000 (16:28 +0100)]
samsung: misc: check_keys(), key_pressed() - remove type static.
This patch removes type "static" from those functions declaration.
Change-Id: I2244ca3568b73251401e5102f26cc113ea69c1a4
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 7 Feb 2014 14:03:41 +0000 (15:03 +0100)]
libtizen: add download logo and download progress bar
Added features:
- add screen with exit info if no cable is connected
- download logo with progress bar after after THOR init
- downlaod failure screen on error
- PIT version, U-boot version on download screen
- function for update progess bar when downloading is going on
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Lukasz Majewski [Mon, 16 Feb 2015 16:40:25 +0000 (17:40 +0100)]
common: lcd: extend lcd api by function lcd_get_position_cursor()
Changes for v2015.04-rc1:
- Moving lcd console related code to lcd_console.c
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Przemyslaw Marczak [Wed, 26 Feb 2014 08:17:45 +0000 (09:17 +0100)]
Trats: Setup: CLK_GATE_BLOCK - enable all clocks
This change allows boot kernel 3.10 on trats
Change-Id: Ic7f1672d9300a32fed9fa6d8f6fc30f118326a83
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Hyungwon Hwang [Fri, 15 Nov 2013 07:10:42 +0000 (16:10 +0900)]
video:lcd:s6e8ax0: increase screen gamma.
Change gamma table to increase the brightness of s6e8ax0 panel.
Change-Id: I6b21022fb90bbb14160c0426a776d73c9590345b
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Tom Rini [Mon, 7 Oct 2019 21:14:02 +0000 (17:14 -0400)]
Prepare v2019.10
Signed-off-by: Tom Rini <trini@konsulko.com>
Eugeniy Paltsev [Mon, 7 Oct 2019 16:10:50 +0000 (19:10 +0300)]
NET: DW: fix regression for ARC boards
The commit
642b80d256e ("net: designware: drop compatible altr, socfpga-stmmac")
breaks designware ethernet for all ARC boards. It removes
"altr, socfpga-stmmac" compatible from "drivers/net/designware.c"
without changing compatible in the boards which use it.
Fix that by adding "snps,arc-dwmac-3.70a" compatible string to
"drivers/net/designware.c" and using it in ARC boards device tree.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Tom Rini [Sun, 6 Oct 2019 22:02:18 +0000 (18:02 -0400)]
Merge branch '2019-10-06-master-imports'
- Regression work-around on SoCFPGA by disabling WDT in some cases.
- Fix seg fault on 'host info' in some cases.
AKASHI Takahiro [Thu, 22 Aug 2019 07:47:39 +0000 (16:47 +0900)]
cmd: host: fix seg fault at "host info"
With the patch below applied, host_block_dev structure was switched
to be placed in platdata rather than priv. The command "host info"
must be aligned with this change. Otherwise, we will see "Segmentation
Fault."
Fixes:
8f994c860d91 ("sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Maxime Ripard [Thu, 3 Oct 2019 16:32:11 +0000 (18:32 +0200)]
MAINTAINERS: Update my email address
I'm not at bootlin anymore, and my mail address doesn't work any longer.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Simon Goldschmidt [Sat, 5 Oct 2019 20:10:11 +0000 (22:10 +0200)]
arm: socfpga: disable CONFIG_SPL_WDT for gen5 and a10
These boards don't have a watchdog enabled in SPL, so make sure
CONFIG_SPL_WDT is not enabled.
Fixes: commit
6874cb72204f ("watchdog: Split WDT from SPL_WDT")
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Heinrich Schuchardt [Sun, 6 Oct 2019 10:26:16 +0000 (12:26 +0200)]
gitlab-ci: fix typo 'plaforms'
%s/plaforms/platforms/g
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Sun, 6 Oct 2019 00:06:58 +0000 (20:06 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
Tom Rini [Fri, 4 Oct 2019 16:22:43 +0000 (12:22 -0400)]
Merge branch '2019-10-04-master-imports'
- Assorted TI platform fixes
- Revert the change that broke environment flag validation
- Assorted typo fixes
- Assorted Kconfig dependency fixes
- Other minor bug fixes
Tom Rini [Fri, 4 Oct 2019 16:22:28 +0000 (12:22 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- dm: core: Correct low cell in ofnode_read_pci_addr()
- dm: core: Correct bad cast in ofnode_get_addr_size_index()
Tom Rini [Fri, 4 Oct 2019 16:21:33 +0000 (12:21 -0400)]
Revert "env: solve compilation error in SPL"
This reverts commit
7d4776545b0f8a8827e5d061206faf61c9ba6ea9. The
changes here break environment validation and furthermore do not seem to
be required.
Signed-off-by: Tom Rini <trini@konsulko.com>
Adam Ford [Wed, 7 Aug 2019 15:16:33 +0000 (10:16 -0500)]
ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and
usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file
which will enable these functions so SPL can properly setup UART, detect
microSD card, and startup.
Fixes:
8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled,
remove MMC init")
Signed-off-by: Adam Ford <aford173@gmail.com>
Ovidiu Panait [Wed, 25 Sep 2019 11:10:54 +0000 (14:10 +0300)]
initcall.h: initcall_run_list(): Improve debug output
Existing debug output is mixed with the function name:
initcall_run_list() initcall: 25263initcall_run_list() (relocated to 425263)
Turn it to:
initcall_run_list() initcall: 25263 (relocated to 425263)
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Andrius Štikonas [Mon, 23 Sep 2019 21:43:41 +0000 (22:43 +0100)]
Kconfig: fix a typo in the description of bmp command.
Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
Tom Rini [Fri, 20 Sep 2019 21:36:50 +0000 (17:36 -0400)]
Kconfig: Migrate CONFIG_BOOTM_* options
Migrate all of the existing OS support options that are under
CONFIG_BOOTM_* to Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Roman Stratiienko [Fri, 20 Sep 2019 13:59:18 +0000 (15:59 +0200)]
cmd: part: number: return hexadecimal value
At this point we are using part number sub-command to retrieve UUID
of the partition using it's name.
e.g.:
part number mmc $mmcdev system_a system_a_index
part uuid mmc $mmcdev:${system_a_index} system_a_uuid
Since 'part uuid' sub-command expects partition index in hex format and
'part number' returns decimal value, 'part uuid' command will provide
wrong UUID or fail.
Fixes:
be683756f62034 ("cmd: part: Add 'number' sub-command")
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Reported-by: Pontus Fuchs <pontus.fuchs@se.bosch.com>
Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Jean-Jacques Hiblot [Tue, 17 Sep 2019 21:18:25 +0000 (17:18 -0400)]
ARM: keystone2: update the default addresses of the secure monitor
To accommodate the growth of u-boot, we need to shift the location of the
secure monitor. Moving it 64kB further.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Andrew F. Davis [Tue, 17 Sep 2019 21:15:40 +0000 (17:15 -0400)]
board: ti: am654: Disable TRNG node for HS devices
On HS devices the access to TRNG is restricted on the non-secure
ARM side, disable the node in DT to prevent firewall violations.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
AKASHI Takahiro [Thu, 12 Sep 2019 06:31:22 +0000 (15:31 +0900)]
autoboot: add necessary dependency at AUTOBOOT_MENU_SHOW
Otherwise, menu_show() will be undefined in bootdelay_process().
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Ley Foon Tan [Fri, 4 Oct 2019 08:43:50 +0000 (16:43 +0800)]
MAINTAINERS, git-mailrc: Update the maintainer for socfpga
This updates MAINTAINERS and git-mailrc to add me as maintainer for
socfpga.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
Heinrich Schuchardt [Thu, 3 Oct 2019 16:45:29 +0000 (16:45 +0000)]
Makefile: mrproper should remove *.pyc files
*.pyc files contain compiled Python bytecode. 'make mrproper' should remove
them.
Removing *.pyc files helps for instance sometimes when running into an
error "binman: Unknown entry type 'blob' in node '/binman/blob'".
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Michal Simek [Wed, 2 Oct 2019 13:53:12 +0000 (15:53 +0200)]
Makefile: Fix typo around CONFIG_SPL_FIT_SOURCE
Trivial fix.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Andrew F. Davis [Tue, 1 Oct 2019 14:33:43 +0000 (10:33 -0400)]
arm: K3: Increase default SYSFW image size allocation
The memory allocated to store the FIT image containing SYSFW and board
configuration data is statically defined to the largest size expected.
This was 269000 bytes but now needs to be grown to 276000 to make room
for the signatures attached to the board configuration data on High
Security devices.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Simon Glass [Wed, 25 Sep 2019 14:55:50 +0000 (08:55 -0600)]
dm: core: Correct bad cast in ofnode_get_addr_size_index()
At present this code passes an fdt_addr_t pointer as a u64 pointer which
is not safe, since sizeof(fdt_addr_t) may be 4, e.g. with sandbox. Correct
this to avoid a stack corruption problem.
Fixes:
e679d03b08 (core: ofnode: Add ofnode_get_addr_size_index)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: correct one typo in the commit message]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 25 Sep 2019 14:55:46 +0000 (08:55 -0600)]
dm: core: Correct low cell in ofnode_read_pci_addr()
This reads the low cell of the PCI address from the wrong cell. Fix it.
Also fix the function that this code came from.
Fixes:
9e51204527 (dm: core: Add operations on device tree references)
Fixes:
4ea5243a3a (fdt: fix fdtdec_get_pci_addr() for CONFIG_PHYS_64BIT)
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Tue, 1 Oct 2019 20:31:26 +0000 (16:31 -0400)]
Merge tag 'rpi-next-2019.10.2' of https://github.com/mbgg/u-boot
RPi4:
Fix amount of memory seen by the kernel.
Tom Rini [Tue, 1 Oct 2019 20:31:11 +0000 (16:31 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Propagate acpi_rsdp_addr to x86 kernel via boot parameters
Andy Shevchenko [Fri, 13 Sep 2019 15:42:00 +0000 (18:42 +0300)]
x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters
This is reincarnation of the U-Boot
commit
3469bf4274540d1491d58e878a9edc0bdcba17ac
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Wed Jan 10 19:40:15 2018 +0200
x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters
after upstream got eventually the Linux kernel
commit
e6e094e053af75cbc164e950814d3d084fb1e698
Author: Juergen Gross <jgross@suse.com>
Date: Tue Nov 20 08:25:29 2018 +0100
x86/acpi, x86/boot: Take RSDP address from boot params if available
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Matthias Brugger [Mon, 9 Sep 2019 16:31:56 +0000 (18:31 +0200)]
rpi4: enable dram bank initialization
When booting through the efi stub, the memory map get's created by
reading the dram bank information. Depending on the version of the RPi4
this information changes. Read the device tree to initialize the dram
bank data structure. This way the kernel is able to access the whole
range of available memory.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Tom Rini [Mon, 30 Sep 2019 11:21:38 +0000 (07:21 -0400)]
Merge tag 'u-boot-atmel-fixes-2019.10-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel
First set of u-boot-atmel fixes for 2019.10 cycle:
This includes only tiny cleanups on env changes related to 2019.10 new
features: removal of duplicate env settings (otherwise there may be
warnings in building..) and a small fix for flashes on Gardena smart
gateway (requires nand bad block tables).
Tom Rini [Mon, 30 Sep 2019 11:20:35 +0000 (07:20 -0400)]
Merge tag 'u-boot-rockchip-
20190928' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix efuse read data number for rk3399
- make_fit_atf.py: fix .its generation for a single atf image
Tudor Ambarus [Fri, 20 Sep 2019 10:52:58 +0000 (10:52 +0000)]
at91: configs: Drop duplication of defconfig macros
'commit
a9221f3ebd6d ("at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs")'
migrated CONFIG_ENV_ macros to defconfigs but did not remove the
identical redefinition of these macros in include/configs/.
Since the duplicated macros have the same value as the ones in defconfigs,
no "redefined" warnings were raised. Remove duplicated macros for all
sama5 and sam9x5ek boards.
While verifying that the removal of the macros from include/configs did
not change the same macros in defconfigs, overwrite the old defconfig by
saving them with the output from "make arch=ARM savedefconfig". This
resulted in the movement of some macros in the defconfig files.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Stefan Roese [Tue, 27 Aug 2019 06:14:50 +0000 (08:14 +0200)]
arm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBT
This patch enables the BBT in NAND on the AT91SAM based GARDENA smart
Gateway. This is especially important, since the Linux driver also
enables this option and uses the BBT table pages. Without setting this
option, U-Boot will try to re-use these pages again (e.g. UBI).
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Tom Rini <trini@konsulko.com>
Marek Vasut [Mon, 18 Mar 2019 02:20:31 +0000 (03:20 +0100)]
ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
This patch restores commit
c49d0ac38a76 ("ARM: dts: rmobile: Increase off-on
delay on the SD Vcc regulator"), which was accidentally dropped during DT
resync in commit
317d13ac6307 ("ARM: dts: rmobile: Synchronize Gen3 DTs with
Linux 5.0").
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Fixes:
317d13ac6307 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0")
Heiko Stuebner [Thu, 26 Sep 2019 19:15:15 +0000 (21:15 +0200)]
rockchip: make_fit_atf.py: fix .its generation for a single atf image
The commit
619f002db864 ("rockchip: make_fit_atf.py: fix loadables property
set error") fixed the double-loading of the primary atf-image, but didn't
take into account that there may be rare atf images with only that main
section present.
Right now this will result in a broken its due to the loadables section not
getting closed correctly, so fix that by adapting the guards around the loop.
The guards now protect against 0 segments when the bl31 binary doesn't
contain any section and 1 segment when only a core atf section is present.
Fixes:
619f002db864 ("rockchip: make_fit_atf.py: fix loadables property set error")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Heiko Stuebner [Wed, 25 Sep 2019 18:40:56 +0000 (20:40 +0200)]
rockchip: misc: read the correct number of bytes from the efuse
Originally the cpuid var the value gets read into was defined as
u8 cpuid[RK3399_CPUID_LEN];
hence the sizeof(cpuid) would return the correct the correct number
of array elements.
With the move to a separate function cpuid becomes a pointer and
sizeof(cpuid) hence returns the pointer size - 8 in the arm64 case.
We do have the actual id length available as function param so use
it for actual amount of bytes to read.
Fixes:
04825384999f ("rockchip: rk3399: derive ethaddr from cpuid")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Tom Rini [Thu, 26 Sep 2019 21:22:22 +0000 (17:22 -0400)]
Merge tag 'efi-2019-10-rc5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for v2019.10-rc5
Bug fixes for the SetVariable() boot service.
Pierre-Jean Texier [Mon, 26 Aug 2019 11:06:18 +0000 (13:06 +0200)]
ci: add envtools support
This commit add envtools suppport to CI to verify if there
is no build issues.
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Pierre-Jean Texier [Mon, 26 Aug 2019 11:06:17 +0000 (13:06 +0200)]
env: add missing <compiler.h> header file
Since commit af95f20 ("env: Create a new file for environment functions"),
a new header file exists.
So, this commit add a missing header file.
Fixes:
include/env.h:158:1: error: unknown type name ‘ulong’; did you mean ‘long’?
ulong env_get_ulong(const char *name, int base, ulong default_val);
^~~~~
long
include/env.h:158:49: error: unknown type name ‘ulong’; did you mean ‘long’?
ulong env_get_ulong(const char *name, int base, ulong default_val);
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Pierre-Jean Texier [Mon, 26 Aug 2019 11:06:16 +0000 (13:06 +0200)]
fw_env: fix build error
The following error appears:
tools/env/fw_env.c:1149:25: error: lvalue required as unary ‘&’ operand
rc = write(fd, &ENV_REDUND_OBSOLETE, sizeof(ENV_REDUND_OBSOLETE));
Fixes: d3716dd ("env: Rename the redundancy flags")
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Suggested-by: Heiko Schocher <hs@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Pierre-Jean Texier [Mon, 26 Aug 2019 11:06:15 +0000 (13:06 +0200)]
fw_env: remove duplicated definitions
Since commit d3716dd ("env: Rename the redundancy flags"), the
definitions of ENV_REDUND_OBSOLETE & ENV_REDUND_ACTIVE was moved
to env.h.
Fixes:
tools/env/fw_env.c:122:22: error: ‘ENV_REDUND_ACTIVE’ redeclared as different kind of symbol
static unsigned char ENV_REDUND_ACTIVE = 1;
^~~~~~~~~~~~~~~~~
In file included from tools/env/fw_env.c:13:
include/env.h:63:2: note: previous definition of ‘ENV_REDUND_ACTIVE’ was here
ENV_REDUND_ACTIVE = 1,
^~~~~~~~~~~~~~~~~
tools/env/fw_env.c:127:22: error: ‘ENV_REDUND_OBSOLETE’ redeclared as different kind of symbol
static unsigned char ENV_REDUND_OBSOLETE;
^~~~~~~~~~~~~~~~~~~
In file included from tools/env/fw_env.c:13:
include/env.h:62:2: note: previous definition of ‘ENV_REDUND_OBSOLETE’ was here
ENV_REDUND_OBSOLETE = 0,
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Heinrich Schuchardt [Mon, 23 Sep 2019 20:38:53 +0000 (22:38 +0200)]
efi_loader: SetVariable() deleting variables
APPEND_WRITE with data length zero is allowable according to the UEFI
specification.
The EDK2 interpretation of no access attributes is attributes = 0. As
the UEFI specification is vague in this respect let's stick to EDK2 here.
Fixes: commit
6d2f27c5fd60 ("efi_loader: variable: support APPEND_WRITE")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Mon, 23 Sep 2019 20:18:09 +0000 (22:18 +0200)]
efi_loader: SetVariable() fix illegal return
We always have to return via EFI_EXIT() from EFIAPI functions.
Coverity reported an unreachable line and a resource leak.
Fixes: commit
6d2f27c5fd60 ("efi_loader: variable: support APPEND_WRITE")
Reported-by: Coverity Scan CID 253575, CID 184095
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 21 Sep 2019 04:38:11 +0000 (06:38 +0200)]
efi_loader: description efi_stri_coll()
Remove outdated TODO for efi_stri_coll(). efi_stri_coll() is already using
the Unicode capitalization table.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tom Rini [Mon, 23 Sep 2019 16:24:39 +0000 (12:24 -0400)]
Prepare v2019.10-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 23 Sep 2019 15:47:37 +0000 (11:47 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 22 Sep 2019 20:39:01 +0000 (16:39 -0400)]
Merge tag 'fixes-for-2019.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-video.git
- fix sunxi LCD clock divider
- fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO
- fix splash banner output with DM_VIDEO
Tom Rini [Sat, 21 Sep 2019 11:31:23 +0000 (07:31 -0400)]
Merge tag 'efi-2019-10-rc4-5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for v2019.10-rc4 (5)
This patch set fixes errors in the UEFI sub-system and adds a function to
compare u16 strings which is prerequisite for further patches.
Mark Kettenis [Fri, 9 Aug 2019 20:30:26 +0000 (22:30 +0200)]
sunxi: video: HDMI: Fix LCD clock divider
Currently we may end up with an LCD clock divider that differs from
the HDMI PHY clock divider if we can't exactly match the pixel clock.
Fix this by using DIV_ROUND_UP to calculate the divider. This works
since the PLL is chosen such that the resulting pixel clock is
never higher than the requested pixel clock.
Fixes:
1feed358ed15 ("sunxi: video: HDMI: Fix clock setup")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Anatolij Gustschin [Fri, 20 Sep 2019 15:23:41 +0000 (17:23 +0200)]
splash: fix splash banner output
Old splash code in cfb_console driver displayed U-Boot version
string by default. Restore this behaviour for DM_VIDEO enabled
configurations.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reported-by: Fabio Estevam <festevam@gmail.com>
Anatolij Gustschin [Wed, 18 Sep 2019 15:40:21 +0000 (17:40 +0200)]
imx: mx6sabreauto: fix splash logo drawing
Enable BMP code. Also configure white on black for video console.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Wed, 18 Sep 2019 15:31:52 +0000 (17:31 +0200)]
imx: colibri_imx6: fix splash logo drawing
Define "splashimage" variable in the default environment
to enable splash screen drawing.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Wed, 18 Sep 2019 15:23:45 +0000 (17:23 +0200)]
imx: icore: fix splash logo drawing
Define "splashimage" variable in the default environment
and enable BMP code. Also configure white on black for
video console.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Thu, 19 Sep 2019 15:19:01 +0000 (17:19 +0200)]
imx: apalis_imx6: fix splash logo drawing
Define "splashimage" variable in the default environment
to enable splash screen drawing.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Wed, 18 Sep 2019 15:05:31 +0000 (17:05 +0200)]
imx: mx6sabresd: fix splash logo drawing
After mxc_ipuv3 DM_VIDEO conversion showing splash image
doesn't work. Fix this. Also enable white on black console
configuration as it used to be with cfb_console driver.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Anatolij Gustschin [Wed, 18 Sep 2019 14:55:49 +0000 (16:55 +0200)]
imx: wandboard: fix splash logo drawing
After mxc_ipuv3 DM_VIDEO conversion showing splash image
doesn't work. Fix this. Also enable white on black console
configuration as it used to be with cfb_console driver.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Wed, 18 Sep 2019 14:47:33 +0000 (16:47 +0200)]
splash: fix logo drawing if CONFIG_VIDEO_LOGO enabled
After mxc_ipuv3 DM_VIDEO conversion board configs with enabled
CONFIG_VIDEO_LOGO do not show splash screen (previosly drawing
splash screen worked via cfb_console driver with CONFIG_VIDEO_LOGO
enabled). Use splash_source library for loading splash images
when CONFIG_SPLASH_SOURCE is selected, otherwise prepare built-in
video logo for drawing.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tom Rini [Fri, 20 Sep 2019 21:43:33 +0000 (17:43 -0400)]
Merge tag 'u-boot-rockchip-
20190920' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix rk3288 tinker and evb SPL boot fail
- Enable get sn from cpuid for rk3399 rockpro64 board
AKASHI Takahiro [Wed, 18 Sep 2019 01:26:30 +0000 (10:26 +0900)]
test: add tests for u16_str<n>cmp()
New seven test cases for u16_str<n>cmp() are added under Unicode unit test,
which should be executed by "ut unicode" command.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
AKASHI Takahiro [Wed, 18 Sep 2019 01:26:29 +0000 (10:26 +0900)]
lib: charset: add u16_str<n>cmp()
u16 version of strcmp(): u16_strncmp() works like u16_strcmp() but only
at most n characters (in u16) are compared.
This function will be used in my UEFI secure boot patch.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
AKASHI Takahiro [Fri, 6 Sep 2019 06:09:53 +0000 (15:09 +0900)]
efi_loader: selftest: enable APPEND_WRITE tests
Now that APPEND_WRITE is supported,
the result check for the only existing test case should be changed to
'todo' to 'error', while two more test cases are added.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
AKASHI Takahiro [Fri, 6 Sep 2019 06:09:52 +0000 (15:09 +0900)]
efi_loader: variable: support APPEND_WRITE
If EFI_VARIABLE_APPEND_WRITE is specified in attributes at
efi_set_variable(), specified data will be appended to the variable's
original value. Attributes other than APPEND_WRITE should not be
modified.
With this patch, APPEND_WRITE test in 'variables' selftest will pass.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Heinrich Schuchardt [Fri, 13 Sep 2019 16:20:40 +0000 (18:20 +0200)]
efi_loader: incorrect return value form DisconnectController
DisconnectController() should never return EFI_NOT_FOUND.
If EFI_DRIVER_BINDING_PROTOCOL.Stop() fails, return EFI_DEVICE_ERROR.
If the driver handle does not expose the EFI_DRIVER_BINDING_PROTOCOL
return EFI_INVALID_PARAMETER.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
AKASHI Takahiro [Thu, 12 Sep 2019 04:52:35 +0000 (13:52 +0900)]
efi_loader: device_path: support Sandbox's "host" devices
Sandbox's "host" devices are currently described as UCLASS_ROOT udevice
with DEV_IF_HOST block device. As the current implementation of
efi_device_path doesn't support such a type, any "host" device
on sandbox cannot be seen as a distinct object.
For example,
=> host bind 0 /foo/disk.img
=> efi devices
Scanning disk host0...
Found 1 disks
Device Device Path
================ ====================
0000000015c19970 /VenHw(
e61d73b9-a384-4acc-aeab-
82e828f3628b)
0000000015c19d70 /VenHw(
e61d73b9-a384-4acc-aeab-
82e828f3628b)
=> efi dh
Handle Protocols
================ ====================
0000000015c19970 Device Path, Device Path To Text, Device Path Utilities, Unicode Collation 2, HII String, HII Database, HII Config Routing
0000000015c19ba0 Driver Binding
0000000015c19c10 Simple Text Output
0000000015c19c80 Simple Text Input, Simple Text Input Ex
0000000015c19d70 Block IO, Device Path, Simple File System
As you can see here, efi_root (0x0000000015c19970) and host0 device
(0x0000000015c19d70) have the same representation of device path.
This is not only inconvenient, but also confusing since two different
efi objects are associated with the same device path and
efi_dp_find_obj() will possibly return a wrong result.
Solution:
Each "host" device should be given an additional device path node
of "vendor device path" to make it distinguishable.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tom Rini [Fri, 20 Sep 2019 14:47:03 +0000 (10:47 -0400)]
Merge branch '2019-09-19-master-imports'
- Coding style corrections in some RTC drivers.
- Small doc updates.
- Regression fix in part_test_dos()
- Regression fix on TI OMAP WDTs.
- Document deadline for CONFIG_DM migration.
- Switch Travis-CI to "xenial" release.
Heinrich Schuchardt [Mon, 16 Sep 2019 16:41:42 +0000 (18:41 +0200)]
dm: MIGRATION: Add migration plan for CONFIG_DM
For many sub-systems we already require the driver model to be used. Yet
there is still a handful of boards that do not have CONFIG_DM enabled.
We should make CONFIG_DM compulsory with release v2020.01
Conversion dates for CONFIG_DM_SPL and CONFIG_DM_TPL are yet to be defined.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Suniel Mahesh [Mon, 16 Sep 2019 08:09:17 +0000 (13:39 +0530)]
watchdog: omap_wdt: Fix WDT target reset when booted from emmc
AM335X based beaglebone black target gets reset by DM converted watchdog
if booted from emmc around 60sec. Fixed this by moving driver's private struct
variable initialization at different places in the driver to driver's probe.
Tested on Beaglebone Black.
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Fixes:
7659ea32 ("watchdog: omap_wdt: Convert watchdog driver to use DT and DM")
Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tom Rini [Fri, 13 Sep 2019 15:51:42 +0000 (11:51 -0400)]
scrapyard: Delete this file and script
The README.scrapyard file has been inconsistently updated. While well
intentioned, bad data is worse than no data, and in this case a pointer
to use the history that git provides. Remove the current content and
the script that would update it from time to time as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Faiz Abbas [Wed, 4 Sep 2019 14:40:12 +0000 (20:10 +0530)]
disk: part_dos: Allocate at least one block size for mbr
The blk_dread() following the mbr allocation reads one block from the
device. This will lead to overflow if block size is greater than the
size of legacy_mbr. Fix this by allocating at least one block size.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Lukasz Majewski [Tue, 3 Sep 2019 13:43:55 +0000 (15:43 +0200)]
kconfig: doc: Update comment regarding CONFIG_IS_ENABLED(FOO) for TPL
This patch adds some commit info for CONFIG_IS_ENABLED(FOO) when used in
TPL context.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Lukasz Majewski [Tue, 3 Sep 2019 13:43:19 +0000 (15:43 +0200)]
doc: fix: Replace SPL_OF_PLATDATA with OF_PLATDATA in examples
The of-plat.rst file till this change has been using
This is at best misleading as SPL_OF_PLATDATA is always defined when we
want to use this SPL tinification feature (also in U-Boot proper).
As a result the OF_PLATDATA SPL specific code is also compiled in when
U-Boot proper is build.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Biwen Li [Tue, 27 Aug 2019 07:32:36 +0000 (15:32 +0800)]
rtc: ds3231/ds3232: fix coding style
The patch fixes coding style
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Ramon Fried [Mon, 12 Aug 2019 17:43:38 +0000 (20:43 +0300)]
travis.yml: change Ubuntu version to xenial
trusty is getting old, move to xenial (16.04)
to get updated gcc and other tools.
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>