Jakub Kicinski [Wed, 12 Apr 2023 01:50:36 +0000 (18:50 -0700)]
net: docs: update the sample code in driver.rst
The sample code talks about single-queue devices and uses locks.
Update it to something resembling more modern code.
Make sure we mention use of READ_ONCE() / WRITE_ONCE().
Change the comment which talked about consumer on the xmit side.
AFAIU xmit is the producer and completions are a consumer.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 13 Apr 2023 10:50:47 +0000 (12:50 +0200)]
Merge branch 'add-emac3-support-for-sa8540p-ride'
Andrew Halaney says:
====================
Add EMAC3 support for sa8540p-ride
This is a forward port / upstream refactor of code delivered
downstream by Qualcomm over at [0] to enable the DWMAC5 based
implementation called EMAC3 on the sa8540p-ride dev board.
From what I can tell with the board schematic in hand,
as well as the code delivered, the main changes needed are:
1. A new address space layout for dwmac5/EMAC3 MTL/DMA regs
2. A new programming sequence required for the EMAC3 based platforms
This series makes the changes above as well as other housekeeping items
such as converting dt-bindings to yaml, etc.
As requested[1], it has been split up by compilation deps / maintainer tree.
I will post a link to the associated devicetree changes that together
with this series get the hardware functioning.
Patches 1-3 are clean ups of the currently supported dt-bindings and
IMO could be picked up as is independent of the rest of the series to
improve the current codebase. They've all been reviewed in prior
versions of the series.
Patches 5-7 are also clean ups of the driver and are worth picking up
independently as well. They don't all have explicit reviews but should
be good to go (trivial changes on non-reviewed bits).
The rest of the patches have new changes, lack review, or are specificly
being made to support the new hardware, so they should wait until the
series as a whole is deemed ready to go by the community.
====================
Link: https://lore.kernel.org/r/20230411200409.455355-1-ahalaney@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrew Halaney [Tue, 11 Apr 2023 20:04:09 +0000 (15:04 -0500)]
net: stmmac: dwmac-qcom-ethqos: Add EMAC3 support
Add the new programming sequence needed for EMAC3 based platforms such
as the sc8280xp family.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrew Halaney [Tue, 11 Apr 2023 20:04:08 +0000 (15:04 -0500)]
net: stmmac: dwmac-qcom-ethqos: Use loopback_en for all speeds
It seems that this variable should be used for all speeds, not just
1000/100.
While at it refactor it slightly to be more readable, including fixing
the typo in the variable name.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrew Halaney [Tue, 11 Apr 2023 20:04:07 +0000 (15:04 -0500)]
net: stmmac: dwmac-qcom-ethqos: Respect phy-mode and TX delay
The driver currently sets a MAC TX delay of 2 ns no matter what the
phy-mode is. If the phy-mode indicates the phy is in charge of the
TX delay (rgmii-txid, rgmii-id), don't do it in the MAC.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrew Halaney [Tue, 11 Apr 2023 20:04:06 +0000 (15:04 -0500)]
net: stmmac: dwmac4: Allow platforms to specify some DMA/MTL offsets
Some platforms have dwmac4 implementations that have a different
address space layout than the default, resulting in the need to define
their own DMA/MTL offsets.
Extend the functions to allow a platform driver to indicate what its
addresses are, overriding the defaults.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrew Halaney [Tue, 11 Apr 2023 20:04:05 +0000 (15:04 -0500)]
net: stmmac: Pass stmmac_priv in some callbacks
Passing stmmac_priv to some of the callbacks allows hwif implementations
to grab some data that platforms can customize. Adjust the callbacks
accordingly in preparation of such a platform customization.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrew Halaney [Tue, 11 Apr 2023 20:04:04 +0000 (15:04 -0500)]
net: stmmac: Remove some unnecessary void pointers
There's a few spots in the hardware interface where a void pointer is
used, but what's passed in and later cast out is always the same type.
Just use the proper type directly.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrew Halaney [Tue, 11 Apr 2023 20:04:03 +0000 (15:04 -0500)]
net: stmmac: Fix DMA typo
DAM is supposed to be DMA. Fix it to improve readability.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrew Halaney [Tue, 11 Apr 2023 20:04:02 +0000 (15:04 -0500)]
net: stmmac: Remove unnecessary if statement brackets
The brackets are unnecessary, remove them to match the coding style
used in the kernel.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrew Halaney [Tue, 11 Apr 2023 20:04:01 +0000 (15:04 -0500)]
dt-bindings: net: qcom,ethqos: Add Qualcomm sc8280xp compatibles
The sc8280xp has a new version of the ETHQOS hardware in it, EMAC v3.
Add a compatible for this.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bhupesh Sharma [Tue, 11 Apr 2023 20:04:00 +0000 (15:04 -0500)]
dt-bindings: net: qcom,ethqos: Convert bindings to yaml
Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML.
In doing so add a new property for iommus since newer platforms support
using one, and without such make dtbs_check fails on them.
While at it, also update the MAINTAINERS file to point to the yaml
version of the bindings.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[halaney: Remove duplicated properties, add MAINTAINERS and iommus]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bhupesh Sharma [Tue, 11 Apr 2023 20:03:59 +0000 (15:03 -0500)]
dt-bindings: net: snps,dwmac: Add Qualcomm Ethernet ETHQOS compatibles
Add Qualcomm Ethernet ETHQOS compatible checks
in snps,dwmac YAML binding document.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bhupesh Sharma [Tue, 11 Apr 2023 20:03:58 +0000 (15:03 -0500)]
dt-bindings: net: snps,dwmac: Update interrupt-names
As commit
fc191af1bb0d ("net: stmmac: platform: Fix misleading
interrupt error msg") noted, not every stmmac based platform
makes use of the 'eth_wake_irq' or 'eth_lpi' interrupts.
So, update the 'interrupt-names' inside 'snps,dwmac' YAML
bindings to reflect the same.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ivan Vecera [Tue, 11 Apr 2023 12:04:42 +0000 (14:04 +0200)]
bnxt_en: Allow to set switchdev mode without existing VFs
Remove an inability of bnxt_en driver to set eswitch to switchdev
mode without existing VFs by:
1. Allow to set switchdev mode in bnxt_dl_eswitch_mode_set() so
representors are created only when num_vfs > 0 otherwise just
set bp->eswitch_mode
2. Do not automatically change bp->eswitch_mode during
bnxt_vf_reps_create() and bnxt_vf_reps_destroy() calls so
the eswitch mode is managed only by an user by devlink.
Just set temporarily bp->eswitch_mode to legacy to avoid
re-opening of representors during destroy.
3. Create representors in bnxt_sriov_enable() if current eswitch
mode is switchdev one
Tested by this sequence:
1. Set PF interface up
2. Set PF's eswitch mode to switchdev
3. Created N VFs
4. Checked that N representors were created
5. Set eswitch mode to legacy
6. Checked that representors were deleted
7. Set eswitch mode back to switchdev
8. Checked that representors exist again for VFs
9. Deleted all VFs
10. Checked that all representors were deleted as well
11. Checked that current eswitch mode is still switchdev
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Link: https://lore.kernel.org/r/20230411120443.126055-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Thu, 13 Apr 2023 04:09:14 +0000 (21:09 -0700)]
Merge branch 'net-thunderbolt-fix-for-sparse-warnings-and-typos'
Mika Westerberg says:
====================
net: thunderbolt: Fix for sparse warnings and typos
This series tries to fix the rest of the sparse warnings generated
against the driver. While there fix the two typos in comments as well.
The previous version of the series can be found here:
https://lore.kernel.org/netdev/
20230404053636.51597-1-mika.westerberg@linux.intel.com/
====================
Link: https://lore.kernel.org/r/20230411091049.12998-1-mika.westerberg@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mika Westerberg [Tue, 11 Apr 2023 09:10:49 +0000 (12:10 +0300)]
net: thunderbolt: Fix typos in comments
Fix two typos in comments:
blongs -> belongs
UPD -> UDP
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mika Westerberg [Tue, 11 Apr 2023 09:10:48 +0000 (12:10 +0300)]
net: thunderbolt: Fix sparse warnings in tbnet_xmit_csum_and_map()
Fixes the following warning when the driver is built with sparse checks
enabled:
main.c:993:23: warning: incorrect type in initializer (different base types)
main.c:993:23: expected restricted __wsum [usertype] wsum
main.c:993:23: got restricted __be32 [usertype]
No functional changes intended.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mika Westerberg [Tue, 11 Apr 2023 09:10:47 +0000 (12:10 +0300)]
net: thunderbolt: Fix sparse warnings in tbnet_check_frame() and tbnet_poll()
Fixes the following warnings when the driver is built with sparse
checks enabled:
main.c:767:47: warning: restricted __le32 degrades to integer
main.c:775:47: warning: restricted __le16 degrades to integer
main.c:776:44: warning: restricted __le16 degrades to integer
main.c:876:40: warning: incorrect type in assignment (different base types)
main.c:876:40: expected restricted __le32 [usertype] frame_size
main.c:876:40: got unsigned int [assigned] [usertype] frame_size
main.c:877:41: warning: incorrect type in assignment (different base types)
main.c:877:41: expected restricted __le32 [usertype] frame_count
main.c:877:41: got unsigned int [usertype]
main.c:878:41: warning: incorrect type in assignment (different base types)
main.c:878:41: expected restricted __le16 [usertype] frame_index
main.c:878:41: got unsigned short [usertype]
main.c:879:38: warning: incorrect type in assignment (different base types)
main.c:879:38: expected restricted __le16 [usertype] frame_id
main.c:879:38: got unsigned short [usertype]
main.c:880:62: warning: restricted __le32 degrades to integer
main.c:880:35: warning: restricted __le16 degrades to integer
No functional changes intended.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Sun, 9 Apr 2023 15:02:04 +0000 (17:02 +0200)]
net: ethernet: Add missing depends on MDIO_DEVRES
A number of MDIO drivers make use of devm_mdiobus_alloc_size(). This
is only available when CONFIG_MDIO_DEVRES is enabled. Add missing
depends or selects, depending on if there are circular dependencies or
not. This avoids linker errors, especially for randconfig builds.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230409150204.2346231-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Sat, 8 Apr 2023 07:47:54 +0000 (09:47 +0200)]
ksz884x: Remove unused functions
Remove unused functions.
These functions may have some value in documenting the
hardware. But that information may be accessed via SCM history.
Flagged by clang-16 with W=1.
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Brett Creeley [Fri, 7 Apr 2023 18:45:39 +0000 (11:45 -0700)]
ionic: Don't overwrite the cyclecounter bitmask
The driver was incorrectly overwriting the cyclecounter bitmask,
which was truncating it and not aligning to the hardware mask value.
This isn't causing any issues, but it's wrong. Fix this by not
constraining the cyclecounter/hardware mask.
Luckily, this seems to cause no issues, which is why this change
doesn't have a fixes tag and isn't being sent to net. However, if
any transformations from time->cycles are needed in the future,
this change will be needed.
Suggested-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 12 Apr 2023 08:21:27 +0000 (09:21 +0100)]
Merge branch 'rk3588-error-prints'
Sebastian Reichel says:
====================
stmmac: Fix RK3588 error prints
This fixes a couple of false positive error messages printed
by stmmac on RK3588. I expect them to go via net-next since
the fixes are not critical.
Changes since PATCHv1:
* https://lore.kernel.org/all/
20230317174243.61500-1-sebastian.reichel@collabora.com/
* Add Fixes tags
* Use loop to request clocks
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Reichel [Fri, 7 Apr 2023 16:11:29 +0000 (18:11 +0200)]
net: ethernet: stmmac: dwmac-rk: fix optional phy regulator handling
The usual devm_regulator_get() call already handles "optional"
regulators by returning a valid dummy and printing a warning
that the dummy regulator should be described properly. This
code open coded the same behaviour, but masked any errors that
are not -EPROBE_DEFER and is quite noisy.
This change effectively unmasks and propagates regulators errors
not involving -ENODEV, downgrades the error print to warning level
if no regulator is specified and captures the probe defer message
for /sys/kernel/debug/devices_deferred.
Fixes:
2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Reichel [Fri, 7 Apr 2023 16:11:28 +0000 (18:11 +0200)]
net: ethernet: stmmac: dwmac-rk: rework optional clock handling
The clock requesting code is quite repetitive. Fix this by requesting
the clocks via devm_clk_bulk_get_optional. The optional variant has been
used, since this is effectively what the old code did. The exact clocks
required depend on the platform and configuration. As a side effect
this change adds correct -EPROBE_DEFER handling.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Fixes:
7ad269ea1a2b ("GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 12 Apr 2023 07:36:07 +0000 (08:36 +0100)]
Merge branch 'dsa-trace-events'
Vladimir Oltean says:
====================
DSA trace events
This series introduces the "dsa" trace event class, with the following
events:
$ trace-cmd list | grep dsa
dsa
dsa:dsa_fdb_add_hw
dsa:dsa_mdb_add_hw
dsa:dsa_fdb_del_hw
dsa:dsa_mdb_del_hw
dsa:dsa_fdb_add_bump
dsa:dsa_mdb_add_bump
dsa:dsa_fdb_del_drop
dsa:dsa_mdb_del_drop
dsa:dsa_fdb_del_not_found
dsa:dsa_mdb_del_not_found
dsa:dsa_lag_fdb_add_hw
dsa:dsa_lag_fdb_add_bump
dsa:dsa_lag_fdb_del_hw
dsa:dsa_lag_fdb_del_drop
dsa:dsa_lag_fdb_del_not_found
dsa:dsa_vlan_add_hw
dsa:dsa_vlan_del_hw
dsa:dsa_vlan_add_bump
dsa:dsa_vlan_del_drop
dsa:dsa_vlan_del_not_found
These are useful to debug refcounting issues on CPU and DSA ports, where
entries may remain lingering, or may be removed too soon, depending on
bugs in higher layers of the network stack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 7 Apr 2023 14:14:51 +0000 (17:14 +0300)]
net: dsa: add trace points for VLAN operations
These are not as critical as the FDB/MDB trace points (I'm not aware of
outstanding VLAN related bugs), but maybe they are useful to somebody,
either debugging something or simply trying to learn more.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 7 Apr 2023 14:14:50 +0000 (17:14 +0300)]
net: dsa: add trace points for FDB/MDB operations
DSA performs non-trivial housekeeping of unicast and multicast addresses
on shared (CPU and DSA) ports, and puts a bit of pressure on higher
layers, requiring them to behave correctly (remove these addresses
exactly as many times as they were added). Otherwise, either addresses
linger around forever, or DSA returns -ENOENT complaining that entries
that were already deleted must be deleted again.
To aid debugging, introduce some trace points specifically for FDB and
MDB - that's where some of the bugs still are right now.
Some bugs I have seen were also due to race conditions, see:
-
630fd4822af2 ("net: dsa: flush switchdev workqueue on bridge join error path")
-
a2614140dc0f ("net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN")
so it would be good to not disturb the timing too much, hence the choice
to use trace points vs regular dev_dbg().
I've had these for some time on my computer in a less polished form, and
they've proven useful. What I found most useful was to enable
CONFIG_BOOTTIME_TRACING, add "trace_event=dsa" to the kernel cmdline,
and run "cat /sys/kernel/debug/tracing/trace". This is to debug more
complex environments with network managers started by the init system,
things like that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 11 Apr 2023 02:35:41 +0000 (04:35 +0200)]
net: dsa: mv88e6xxx: Correct cmode to PHY_INTERFACE_
The switch can either take the MAC or the PHY role in an MII or RMII
link. There are distinct PHY_INTERFACE_ macros for these two roles.
Correct the mapping so that the `REV` version is used for the PHY
role.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230411023541.2372609-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shailend Chand [Fri, 7 Apr 2023 18:48:30 +0000 (11:48 -0700)]
gve: Unify duplicate GQ min pkt desc size constants
The two constants accomplish the same thing.
Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230407184830.309398-1-shailend@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Fri, 7 Apr 2023 14:56:09 +0000 (07:56 -0700)]
tools: ynl: throw a more meaningful exception if family not supported
cli.py currently throws a pure KeyError if kernel doesn't support
a netlink family. Users who did not write ynl (hah) may waste
their time investigating what's wrong with the Python code.
Improve the error message:
Traceback (most recent call last):
File "/home/kicinski/devel/linux/tools/net/ynl/lib/ynl.py", line 362, in __init__
self.family = GenlFamily(self.yaml['name'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/kicinski/devel/linux/tools/net/ynl/lib/ynl.py", line 331, in __init__
self.genl_family = genl_family_name_to_id[family_name]
~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^
KeyError: 'netdev'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/kicinski/devel/linux/./tools/net/ynl/cli.py", line 52, in <module>
main()
File "/home/kicinski/devel/linux/./tools/net/ynl/cli.py", line 31, in main
ynl = YnlFamily(args.spec, args.schema)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/kicinski/devel/linux/tools/net/ynl/lib/ynl.py", line 364, in __init__
raise Exception(f"Family '{self.yaml['name']}' not supported by the kernel")
Exception: Family 'netdev' not supported by the kernel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230407145609.297525-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiapeng Chong [Fri, 7 Apr 2023 03:41:57 +0000 (11:41 +0800)]
net: fddi: skfp: rmt: Clean up some inconsistent indenting
No functional modification involved.
drivers/net/fddi/skfp/rmt.c:236 rmt_fsm() warn: if statement not indented.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4736
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230407034157.61276-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simon Horman [Fri, 7 Apr 2023 13:26:51 +0000 (15:26 +0200)]
net: ethernet: mtk_eth_soc: use be32 type to store be32 values
n_addr is used to store be32 values,
so a sparse-friendly array of be32 to store these values.
Flagged by sparse:
.../mtk_ppe_debugfs.c:59:27: warning: incorrect type in assignment (different base types)
.../mtk_ppe_debugfs.c:59:27: expected unsigned int
.../mtk_ppe_debugfs.c:59:27: got restricted __be32 [usertype]
.../mtk_ppe_debugfs.c:161:46: warning: cast to restricted __be16
No functional changes intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230401-mtk_eth_soc-sparse-v2-1-963becba3cb7@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 11 Apr 2023 00:56:20 +0000 (17:56 -0700)]
Merge branch 'net-lockless-stop-wake-combo-macros'
Jakub Kicinski says:
====================
net: lockless stop/wake combo macros
A lot of drivers follow the same scheme to stop / start queues
without introducing locks between xmit and NAPI tx completions.
I'm guessing they all copy'n'paste each other's code.
The original code dates back all the way to e1000 and Linux 2.6.19.
v3: https://lore.kernel.org/all/
20230405223134.94665-1-kuba@kernel.org/
v2: https://lore.kernel.org/all/
20230401051221.3160913-2-kuba@kernel.org/
v1: https://lore.kernel.org/all/
20230322233028.269410-1-kuba@kernel.org/
rfc: https://lore.kernel.org/all/
20230311050130.115138-1-kuba@kernel.org/
====================
Link: https://lore.kernel.org/r/20230407012536.273382-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 Apr 2023 01:25:36 +0000 (18:25 -0700)]
net: piggy back on the memory barrier in bql when waking queues
Drivers call netdev_tx_completed_queue() right before
netif_txq_maybe_wake(). If BQL is enabled netdev_tx_completed_queue()
should issue a memory barrier, so we can depend on that separating
the stop check from the consumer index update, instead of adding
another barrier in netif_txq_maybe_wake().
This matters more than the barriers on the xmit path, because
the wake condition is almost always true. So we issue the
consumer side barrier often.
Wrap netdev_tx_completed_queue() in a local helper to issue
the barrier even if BQL is disabled. Keep the same semantics
as netdev_tx_completed_queue() (barrier only if bytes != 0)
to make it clear that the barrier is conditional.
Plus since macro gets pkt/byte counts as arguments now -
we can skip waking if there were no packets completed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 Apr 2023 01:25:35 +0000 (18:25 -0700)]
bnxt: use new queue try_stop/try_wake macros
Convert bnxt to use new macros rather than open code the logic.
Two differences:
(1) bnxt_tx_int() will now only issue a memory barrier if it sees
enough space on the ring to wake the queue. This should be fine,
the mb() is between the writes to the ring pointers and checking
queue state.
(2) we'll start the queue instead of waking on race, this should
be safe inside the xmit handler.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 Apr 2023 01:25:34 +0000 (18:25 -0700)]
ixgbe: use new queue try_stop/try_wake macros
Convert ixgbe to use the new macros, I think a lot of people
copy the ixgbe code. The only functional change is that the
unlikely() in ixgbe_clean_tx_irq() turns into a likely()
inside the new macro and no longer includes
total_packets && netif_carrier_ok(tx_ring->netdev)
which is probably for the best, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 Apr 2023 01:25:33 +0000 (18:25 -0700)]
net: provide macros for commonly copied lockless queue stop/wake code
A lot of drivers follow the same scheme to stop / start queues
without introducing locks between xmit and NAPI tx completions.
I'm guessing they all copy'n'paste each other's code.
The original code dates back all the way to e1000 and Linux 2.6.19.
Smaller drivers shy away from the scheme and introduce a lock
which may cause deadlocks in netpoll.
Provide macros which encapsulate the necessary logic.
The macros do not prevent false wake ups, the extra barrier
required to close that race is not worth it. See discussion in:
https://lore.kernel.org/all/
c39312a2-4537-14b4-270c-
9fe1fbb91e89@gmail.com/
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 Apr 2023 01:25:32 +0000 (18:25 -0700)]
docs: net: use C syntax highlight in driver.rst
Use syntax highlight, comment out the "..." since they are
not valid C.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 Apr 2023 01:25:31 +0000 (18:25 -0700)]
docs: net: move the probe and open/close sections of driver.rst up
Somehow it feels more right to start from the probe then open,
then tx... Much like the lifetime of the driver itself.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 Apr 2023 01:25:30 +0000 (18:25 -0700)]
docs: net: reformat driver.rst from a list to sections
driver.rst had a historical form of list of common problems.
In the age os Sphinx and rendered documentation it's better
to use the more usual title + text format.
This will allow us to render kdoc into the output more naturally.
No changes to the actual text.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Fri, 7 Apr 2023 14:59:11 +0000 (16:59 +0200)]
net: phy: sfp: constify pointers to hwmon_channel_info
Statically allocated array of pointed to hwmon_channel_info can be made
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230407145911.79642-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Fri, 7 Apr 2023 14:59:10 +0000 (16:59 +0200)]
net: phy: nxp-tja11xx: constify pointers to hwmon_channel_info
Statically allocated array of pointed to hwmon_channel_info can be made
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230407145911.79642-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Fri, 7 Apr 2023 14:59:09 +0000 (16:59 +0200)]
net: phy: mxl: constify pointers to hwmon_channel_info
Statically allocated array of pointed to hwmon_channel_info can be made
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230407145911.79642-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Fri, 7 Apr 2023 14:59:08 +0000 (16:59 +0200)]
net: phy: marvell: constify pointers to hwmon_channel_info
Statically allocated array of pointed to hwmon_channel_info can be made
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230407145911.79642-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Fri, 7 Apr 2023 14:59:07 +0000 (16:59 +0200)]
net: phy: bcm54140: constify pointers to hwmon_channel_info
Statically allocated array of pointed to hwmon_channel_info can be made
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230407145911.79642-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Fri, 7 Apr 2023 14:59:06 +0000 (16:59 +0200)]
net: phy: aquantia: constify pointers to hwmon_channel_info
Statically allocated array of pointed to hwmon_channel_info can be made
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230407145911.79642-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Fri, 7 Apr 2023 14:59:05 +0000 (16:59 +0200)]
net: aquantia: constify pointers to hwmon_channel_info
Statically allocated array of pointed to hwmon_channel_info can be made
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230407145911.79642-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Fri, 7 Apr 2023 14:59:04 +0000 (16:59 +0200)]
net: nfp: constify pointers to hwmon_channel_info
Statically allocated array of pointed to hwmon_channel_info can be made
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230407145911.79642-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 10 Apr 2023 01:59:13 +0000 (18:59 -0700)]
Merge branch 'hwmon-const' of git://git./linux/kernel/git/groeck/linux-staging
Pull in pre-requisite patches from Guenter Roeck to constify
pointers to hwmon_channel_info.
* 'hwmon-const' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: constify pointers to hwmon_channel_info
Link: https://lore.kernel.org/all/3a0391e7-21f6-432a-9872-329e298e1582@roeck-us.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 6 Apr 2023 11:42:46 +0000 (14:42 +0300)]
net: dsa: replace NETDEV_PRE_CHANGE_HWTSTAMP notifier with a stub
There was a sort of rush surrounding commit
88c0a6b503b7 ("net: create a
netdev notifier for DSA to reject PTP on DSA master"), due to a desire
to convert DSA's attempt to deny TX timestamping on a DSA master to
something that doesn't block the kernel-wide API conversion from
ndo_eth_ioctl() to ndo_hwtstamp_set().
What was required was a mechanism that did not depend on ndo_eth_ioctl(),
and what was provided was a mechanism that did not depend on
ndo_eth_ioctl(), while at the same time introducing something that
wasn't absolutely necessary - a new netdev notifier.
There have been objections from Jakub Kicinski that using notifiers in
general when they are not absolutely necessary creates complications to
the control flow and difficulties to maintainers who look at the code.
So there is a desire to not use notifiers.
In addition to that, the notifier chain gets called even if there is no
DSA in the system and no one is interested in applying any restriction.
Take the model of udp_tunnel_nic_ops and introduce a stub mechanism,
through which net/core/dev_ioctl.c can call into DSA even when
CONFIG_NET_DSA=m.
Compared to the code that existed prior to the notifier conversion, aka
what was added in commits:
-
4cfab3566710 ("net: dsa: Add wrappers for overloaded ndo_ops")
-
3369afba1e46 ("net: Call into DSA netdevice_ops wrappers")
this is different because we are not overloading any struct
net_device_ops of the DSA master anymore, but rather, we are exposing a
rather specific functionality which is orthogonal to which API is used
to enable it - ndo_eth_ioctl() or ndo_hwtstamp_set().
Also, what is similar is that both approaches use function pointers to
get from built-in code to DSA.
There is no point in replicating the function pointers towards
__dsa_master_hwtstamp_validate() once for every CPU port (dev->dsa_ptr).
Instead, it is sufficient to introduce a singleton struct dsa_stubs,
built into the kernel, which contains a single function pointer to
__dsa_master_hwtstamp_validate().
I find this approach preferable to what we had originally, because
dev->dsa_ptr->netdev_ops->ndo_do_ioctl() used to require going through
struct dsa_port (dev->dsa_ptr), and so, this was incompatible with any
attempts to add any data encapsulation and hide DSA data structures from
the outside world.
Link: https://lore.kernel.org/netdev/20230403083019.120b72fd@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 6 Apr 2023 19:46:34 +0000 (19:46 +0000)]
net: make SO_BUSY_POLL available to all users
After commit
217f69743681 ("net: busy-poll: allow preemption
in sk_busy_loop()"), a thread willing to use busy polling
is not hurting other threads anymore in a non preempt kernel.
I think it is safe to remove CAP_NET_ADMIN check.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230406194634.1804691-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 8 Apr 2023 03:06:05 +0000 (20:06 -0700)]
Merge branch 'net-stmmac-dwmac-anarion-address-issues-flagged-by-sparse'
Simon Horman says:
====================
net: stmmac: dwmac-anarion: address issues flagged by sparse
Two minor enhancements to dwmac-anarion to address issues flagged by
sparse.
1. Always return struct anarion_gmac * from anarion_config_dt()
2. Add __iomem annotation to register base
No functional change intended.
Compile tested only.
====================
Link: https://lore.kernel.org/r/20230406-dwmac-anarion-sparse-v1-0-b0c866c8be9d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Thu, 6 Apr 2023 17:30:10 +0000 (19:30 +0200)]
net: stmmac: dwmac-anarion: Always return struct anarion_gmac * from anarion_config_dt()
Always return struct anarion_gmac * from anarion_config_dt().
In the case where ctl_block was an error pointer it was being
returned directly. Which sparse flags as follows:
.../dwmac-anarion.c:73:24: warning: incorrect type in return expression (different address spaces)
.../dwmac-anarion.c:73:24: expected struct anarion_gmac *
.../dwmac-anarion.c:73:24: got void [noderef] __iomem *[assigned] ctl_block
Avoid this by converting the error pointer to an error.
And then reversing the conversion.
As a side effect, the error can be used for logging purposes,
subjectively, leading to a minor cleanup.
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Thu, 6 Apr 2023 17:30:09 +0000 (19:30 +0200)]
net: stmmac: dwmac-anarion: Use annotation __iomem for register base
Use __iomem annotation the register base: the ctl_block field of struct
anarion_gmac. I believe this is the normal practice for such variables.
By doing so some casting is avoided.
And sparse no longer reports:
.../dwmac-anarion.c:29:23: warning: incorrect type in argument 1 (different address spaces)
.../dwmac-anarion.c:29:23: expected void const volatile [noderef] __iomem *addr
.../dwmac-anarion.c:29:23: got void *
.../dwmac-anarion.c:34:22: warning: incorrect type in argument 2 (different address spaces)
.../dwmac-anarion.c:34:22: expected void volatile [noderef] __iomem *addr
.../dwmac-anarion.c:34:22: got void *
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 6 Apr 2023 12:54:12 +0000 (15:54 +0300)]
net: stmmac: remove set but unused mask in stmmac_ethtool_set_link_ksettings()
This was never used since the commit that added it -
e58bb43f5e43
("stmmac: initial support to manage pcs modes").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230406125412.48790-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 8 Apr 2023 02:50:32 +0000 (19:50 -0700)]
Merge tag 'ipsec-esn-replay' of https://git./linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
Improve IPsec limits, ESN and replay window
This series overcomes existing hardware limitations in Mellanox ConnectX
devices around handling IPsec soft and hard limits.
In addition, the ESN logic is tied and added an interface to configure
replay window sequence numbers through existing iproute2 interface.
ip xfrm state ... [ replay-seq SEQ ] [ replay-oseq SEQ ]
[ replay-seq-hi SEQ ] [ replay-oseq-hi SEQ ]
Link: https://lore.kernel.org/all/cover.1680162300.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
* tag 'ipsec-esn-replay' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5e: Simulate missing IPsec TX limits hardware functionality
net/mlx5e: Generalize IPsec work structs
net/mlx5e: Reduce contention in IPsec workqueue
net/mlx5e: Set IPsec replay sequence numbers
net/mlx5e: Remove ESN callbacks if it is not supported
xfrm: don't require advance ESN callback for packet offload
net/mlx5e: Overcome slow response for first IPsec ASO WQE
net/mlx5e: Add SW implementation to support IPsec 64 bit soft and hard limits
net/mlx5e: Prevent zero IPsec soft/hard limits
net/mlx5e: Factor out IPsec ASO update function
====================
Link: https://lore.kernel.org/r/20230406071902.712388-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 8 Apr 2023 02:46:17 +0000 (19:46 -0700)]
Merge branch 'add-support-for-j784s4-cpsw9g'
Siddharth Vadapalli says:
====================
Add support for J784S4 CPSW9G
This series adds a new compatible to am65-cpsw driver for the CPSW9G
instance of the CPSW Ethernet Switch on TI's J784S4 SoC which has 8
external ports and 1 internal host port.
The CPSW9G instance supports QSGMII and USXGMII modes for which driver
support is added.
Additionally, the interface mode specific configurations are moved to the
am65_cpsw_nuss_mac_config() callback. Also, a TODO comment is added for
verifying whether in-band mode is necessary for 10 Mbps RGMII mode.
NOTE:
I have verified that the mac_config() operations are preserved across
link up and link down events for SGMII and USXGMII mode with the new
implementation in this series, as suggested by:
Russell King <linux@armlinux.org.uk>
For patches 1 and 3 of this series, I believe that the following tag:
Suggested-by: Russell King <linux@armlinux.org.uk>
should be added. However, I did not add it since I did not yet get
the permission to do so. I will be happy if the tags are added, since
the new implementation is almost entirely based on Russell's suggestion,
with minor changes made by me.
v2:
https://lore.kernel.org/r/
20230403110106.983994-1-s-vadapalli@ti.com/
v1:
https://lore.kernel.org/r/
20230331065110.604516-1-s-vadapalli@ti.com/
====================
Link: https://lore.kernel.org/r/20230404061459.1100519-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Siddharth Vadapalli [Tue, 4 Apr 2023 06:14:59 +0000 (11:44 +0530)]
net: ethernet: ti: am65-cpsw: Enable USXGMII mode for J784S4 CPSW9G
TI's J784S4 SoC supports USXGMII mode. Add USXGMII mode to the
extra_modes member of the J784S4 SoC data.
Configure MAC control register for supporting USXGMII mode and add
MAC_5000FD in the "mac_capabilities" member of struct "phylink_config".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Siddharth Vadapalli [Tue, 4 Apr 2023 06:14:58 +0000 (11:44 +0530)]
net: ethernet: ti: am65-cpsw: Enable QSGMII for J784S4 CPSW9G
TI's J784S4 SoC supports QSGMII mode with the CPSW9G instance of the
CPSW Ethernet Switch. Add a new compatible for J784S4 SoC and enable
QSGMII support for it by adding QSGMII mode to the extra_modes member of
the "j784s4_cpswxg_pdata" SoC data.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Siddharth Vadapalli [Tue, 4 Apr 2023 06:14:57 +0000 (11:44 +0530)]
net: ethernet: ti: am65-cpsw: Move mode specific config to mac_config()
Move the interface mode specific configuration to the mac_config()
callback am65_cpsw_nuss_mac_config().
Also, do not reset the MAC Control register on mac_link_down(). Only
clear those bits that can possibly be set in mac_link_up().
Let the MAC remain in IDLE state after mac_link_down(). Bring it out of
the IDLE state on mac_link_up().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Thu, 6 Apr 2023 20:29:56 +0000 (22:29 +0200)]
hwmon: constify pointers to hwmon_channel_info
HWmon core receives an array of pointers to hwmon_channel_info and it
does not modify it, thus it can be array of const pointers for safety.
This allows drivers to make them also const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Felix Fietkau [Wed, 5 Apr 2023 15:10:26 +0000 (17:10 +0200)]
net: ethernet: mtk_eth_soc: mtk_ppe: prefer newly added l2 flows
When a device is roaming between interfaces and a new flow entry is
created, we should assume that its output device is more up to date than
whatever entry existed already.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Wed, 5 Apr 2023 15:10:25 +0000 (17:10 +0200)]
net: ethernet: mtk_eth_soc: add code for offloading flows from wlan devices
WED version 2 (on MT7986 and later) can offload flows originating from
wireless devices.
In order to make that work, ndo_setup_tc needs to be implemented on the
netdevs. This adds the required code to offload flows coming in from WED,
while keeping track of the incoming wed index used for selecting the
correct PPE device.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 7 Apr 2023 02:08:56 +0000 (19:08 -0700)]
Merge tag 'mlx5-updates-2023-04-05' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-04-05
From Paul:
- TC action parsing cleanups
- Correctly report stats for missed packets
- Many CT actions limitations removed due to hw misses will now
continue from the relevant tc ct action in software.
From Adham:
- RQ/SQ devlink health diagnostics layout fixes
From Gal And Rahul:
- PTP code cleanup and cyclecounter shift value improvement
* tag 'mlx5-updates-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix SQ SW state layout in SQ devlink health diagnostics
net/mlx5e: Fix RQ SW state layout in RQ devlink health diagnostics
net/mlx5e: Rename misleading skb_pc/cc references in ptp code
net/mlx5: Update cyclecounter shift value to improve ptp free running mode precision
net/mlx5e: Remove redundant macsec code
net/mlx5e: TC, Remove sample and ct limitation
net/mlx5e: TC, Remove mirror and ct limitation
net/mlx5e: TC, Remove tuple rewrite and ct limitation
net/mlx5e: TC, Remove multiple ct actions limitation
net/mlx5e: TC, Remove special handling of CT action
net/mlx5e: TC, Remove CT action reordering
net/mlx5e: CT: Use per action stats
net/mlx5e: TC, Move main flow attribute cleanup to helper func
net/mlx5e: TC, Remove unused vf_tun variable
net/mlx5e: Set default can_offload action
====================
Link: https://lore.kernel.org/r/20230406020232.83844-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Wed, 5 Apr 2023 14:25:12 +0000 (16:25 +0200)]
selftests: forwarding: hw_stats_l3: Detect failure to install counters
Running this test makes little sense if the enabled l3_stats are not
actually reported as "used". This can signify a failure of a driver to
install the necessary counters, or simply lack of support for enabling
in-HW counters on a given netdevice. It is generally impossible to tell
from the outside which it is. But more likely than not, if somebody is
running this on veth pairs, they do not intend to actually test that a
certain piece of HW can install in-HW counters for the veth. It is more
likely they are e.g. running the test by mistake.
Therefore detect that the counter has not been actually installed. In that
case, if the netdevice is one end of a veth pair, SKIP. Otherwise FAIL.
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/a86817961903cca5cb0aebf2b2a06294b8aa7dea.1680704172.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Wed, 5 Apr 2023 17:29:48 +0000 (19:29 +0200)]
net: sunhme: move asm includes to below linux includes
A recent rearrangement of includes has lead to a problem on m68k
as flagged by the kernel test robot.
Resolve this by moving the block asm includes to below linux includes.
A side effect i that non-Sparc asm includes are now immediately
before Sparc asm includes, which seems nice.
Using sparse v0.6.4 I was able to reproduce this problem as follows
using the config provided by the kernel test robot:
$ wget https://download.01.org/0day-ci/archive/
20230404/
202304041748.0sQc4K4l-lkp@intel.com/config
$ cp config .config
$ make ARCH=m68k oldconfig
$ make ARCH=m68k C=2 M=drivers/net/ethernet/sun
CC [M] drivers/net/ethernet/sun/sunhme.o
In file included from drivers/net/ethernet/sun/sunhme.c:19:
./arch/m68k/include/asm/irq.h:78:11: error: expected ‘;’ before ‘void’
78 | asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
| ^~~~~
| ;
./arch/m68k/include/asm/irq.h:78:40: warning: ‘struct pt_regs’ declared inside parameter list will not be visible outside of this definition or declaration
78 | asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
| ^~~~~~~
Compile tested only.
Fixes:
1ff4f42aef60 ("net: sunhme: Alphabetize includes")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304041748.0sQc4K4l-lkp@intel.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230405-sunhme-includes-fix-v1-1-bf17cc5de20d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 6 Apr 2023 18:58:36 +0000 (11:58 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Conflicts:
drivers/net/ethernet/google/gve/gve.h
3ce934558097 ("gve: Secure enough bytes in the first TX desc for all TCP pkts")
75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format")
https://lore.kernel.org/all/
20230406104927.
45d176f5@canb.auug.org.au/
https://lore.kernel.org/all/
c5872985-1a95-0bc8-9dcc-
b6f23b439e9d@tessares.net/
Adjacent changes:
net/can/isotp.c
051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()")
96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 6 Apr 2023 18:39:07 +0000 (11:39 -0700)]
Merge tag 'net-6.3-rc6-2' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and can.
Current release - regressions:
- wifi: mac80211:
- fix potential null pointer dereference
- fix receiving mesh packets in forwarding=0 networks
- fix mesh forwarding
Current release - new code bugs:
- virtio/vsock: fix leaks due to missing skb owner
Previous releases - regressions:
- raw: fix NULL deref in raw_get_next().
- sctp: check send stream number after wait_for_sndbuf
- qrtr:
- fix a refcount bug in qrtr_recvmsg()
- do not do DEL_SERVER broadcast after DEL_CLIENT
- wifi: brcmfmac: fix SDIO suspend/resume regression
- wifi: mt76: fix use-after-free in fw features query.
- can: fix race between isotp_sendsmg() and isotp_release()
- eth: mtk_eth_soc: fix remaining throughput regression
- eth: ice: reset FDIR counter in FDIR init stage
Previous releases - always broken:
- core: don't let netpoll invoke NAPI if in xmit context
- icmp: guard against too small mtu
- ipv6: fix an uninit variable access bug in __ip6_make_skb()
- wifi: mac80211: fix the size calculation of
ieee80211_ie_len_eht_cap()
- can: fix poll() to not report false EPOLLOUT events
- eth: gve: secure enough bytes in the first TX desc for all TCP
pkts"
* tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: stmmac: check fwnode for phy device before scanning for phy
net: stmmac: Add queue reset into stmmac_xdp_open() function
selftests: net: rps_default_mask.sh: delete veth link specifically
net: fec: make use of MDIO C45 quirk
can: isotp: fix race between isotp_sendsmg() and isotp_release()
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
gve: Secure enough bytes in the first TX desc for all TCP pkts
netlink: annotate lockless accesses to nlk->max_recvmsg_len
ethtool: reset #lanes when lanes is omitted
ping: Fix potentail NULL deref for /proc/net/icmp.
raw: Fix NULL deref in raw_get_next().
ice: Reset FDIR counter in FDIR init stage
ice: fix wrong fallback logic for FDIR
net: stmmac: fix up RX flow hash indirection table when setting channels
net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe
wifi: mt76: ignore key disable commands
wifi: ath11k: reduce the MHI timeout to 20s
ipv6: Fix an uninit variable access bug in __ip6_make_skb()
...
Linus Torvalds [Thu, 6 Apr 2023 18:34:18 +0000 (11:34 -0700)]
Merge tag 'linux-kselftest-fixes-6.3-rc6' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"One single fix to mount_setattr_test build failure"
* tag 'linux-kselftest-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests mount: Fix mount_setattr_test builds failed
Linus Torvalds [Thu, 6 Apr 2023 18:27:21 +0000 (11:27 -0700)]
Merge tag 'for-linus-iommufd' of git://git./linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- An invalid VA range can be be put in a pages and eventually trigger
WARN_ON, reject it early
- Use of the wrong start index value when doing the complex batch carry
scheme
- Wrong store ordering resulting in corrupting data used in a later
calculation that corrupted the batch structure during carry
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not corrupt the pfn list when doing batch carry
iommufd: Fix unpinning of pages when an access is present
iommufd: Check for uptr overflow
Linus Torvalds [Thu, 6 Apr 2023 18:08:03 +0000 (11:08 -0700)]
Merge tag 'pwm/for-6.3-rc6' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"These are some fixes to make sure the PWM state structure is always
initialized to a known state.
Prior to this it could happen in some situations that random data from
the stack would leak into the data structure and cause subtle bugs"
* tag 'pwm/for-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Zero-initialize the pwm_state passed to driver's .get_state()
pwm: meson: Explicitly set .polarity in .get_state()
pwm: sprd: Explicitly set .polarity in .get_state()
pwm: iqs620a: Explicitly set .polarity in .get_state()
pwm: cros-ec: Explicitly set .polarity in .get_state()
pwm: hibvt: Explicitly set .polarity in .get_state()
Linus Torvalds [Thu, 6 Apr 2023 17:25:27 +0000 (10:25 -0700)]
Merge tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Mostly i915 fixes: dp mst for compression/dsc, perf ioctl uaf, ctx rpm
accounting, gt reset vs huc loading.
And a few individual driver fixes: ivpu dma fence&suspend, panfrost
mmap, nouveau color depth"
* tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu: Fix S3 system suspend when not idle
accel/ivpu: Add dma fence to command buffers only
drm/i915: Fix context runtime accounting
drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
drm/i915: Use compressed bpp when calculating m/n value for DP MST DSC
drm/i915/huc: Cancel HuC delayed load timer on reset.
drm/i915/ttm: fix sparse warning
drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error path
drm/nouveau/disp: Support more modes by checking with lower bpc
Linus Torvalds [Thu, 6 Apr 2023 17:19:30 +0000 (10:19 -0700)]
Merge tag 'sound-6.3-rc6' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are various fixes for Intel drivers,
and there is a change in ASoC PCM core for the format constraints.
In addition, a workaround for HD-audio HDMI regressions and usual
HD-audio quirks are found"
* tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Preserve the previous PCM device upon re-enablement
ALSA: hda/realtek: Add quirk for Clevo X370SNW
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: SOF: avoid a NULL dereference with unsupported widgets
ASoC: da7213.c: add missing pm_runtime_disable()
ASoC: hdac_hdmi: use set_stream() instead of set_tdm_slots()
ASoC: codecs: lpass: fix the order or clks turn off during suspend
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750
ASoC: SOF: ipc4: Ensure DSP is in D0I0 during sof_ipc4_set_get_data()
ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)
ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm
ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15
ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15
Linus Torvalds [Thu, 6 Apr 2023 17:13:23 +0000 (10:13 -0700)]
Merge tag 'platform-drivers-x86-v6.3-5' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- more think-lmi fixes
- one DMI quirk addition
* tag 'platform-drivers-x86-v6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk list
platform/x86: think-lmi: Clean up display of current_value on Thinkstation
platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings
platform/x86: think-lmi: Fix memory leak when showing current settings
Linus Torvalds [Thu, 6 Apr 2023 16:51:04 +0000 (09:51 -0700)]
Merge tag 'asm-generic-fixes-6.3' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are minor fixes to address false-positive build warnings:
Some of the less common I/O accessors are missing __force casts and
cause sparse warnings for their implied byteswap, and a recent change
to __generic_cmpxchg_local() causes a warning about constant integer
truncation"
* tag 'asm-generic-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: avoid __generic_cmpxchg_local warnings
asm-generic/io.h: suppress endianness warnings for relaxed accessors
asm-generic/io.h: suppress endianness warnings for readq() and writeq()
Michael Sit Wei Hong [Thu, 6 Apr 2023 02:45:41 +0000 (10:45 +0800)]
net: stmmac: check fwnode for phy device before scanning for phy
Some DT devices already have phy device configured in the DT/ACPI.
Current implementation scans for a phy unconditionally even though
there is a phy listed in the DT/ACPI and already attached.
We should check the fwnode if there is any phy device listed in
fwnode and decide whether to scan for a phy to attach to.
Fixes:
fe2cfbc96803 ("net: stmmac: check if MAC needs to attach to a PHY")
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/lkml/20230403212434.296975-1-martin.blumenstingl@googlemail.com/
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shahab Vahedi <shahab@synopsys.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Link: https://lore.kernel.org/r/20230406024541.3556305-1-michael.wei.hong.sit@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yinjun Zhang [Wed, 5 Apr 2023 12:08:29 +0000 (14:08 +0200)]
nfp: initialize netdev's dev_port with correct id
`dev_port` is used to differentiate devices that instantiate from
the same function, which is the case in most of NFP NICs.
In some customized scenario, `dev_port` is used to rename netdev
instead of `phys_port_name`. Example rules using `dev_port`:
SUBSYSTEM=="net", ACTION=="add", KERNELS=="0000:e1:00.0", ATTR{dev_port}=="0", NAME:="ens8np0"
SUBSYSTEM=="net", ACTION=="add", KERNELS=="0000:e1:00.0", ATTR{dev_port}=="1", NAME:="ens8np1"
To take port split case into account, here we initialize `dev_port`
according to the port sequence in eth_table from management firmware
instead of using port label id directly. And management firmware
makes sure that port sequence matches its label id.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20230405120829.28817-1-louis.peens@corigine.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet [Wed, 5 Apr 2023 07:15:56 +0000 (07:15 +0000)]
selftests/net: fix typo in tcp_mmap
kernel test robot reported the following warning:
All warnings (new ones prefixed by >>):
tcp_mmap.c: In function 'child_thread':
>> tcp_mmap.c:211:61: warning: 'lu' may be used uninitialized in this function [-Wmaybe-uninitialized]
211 | zc.length = min(chunk_size, FILE_SZ - lu);
We want to read FILE_SZ bytes, so the correct expression
should be (FILE_SZ - total)
Fixes:
5c5945dc695c ("selftests/net: Add SHA256 computation over data sent in tcp_mmap")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304042104.UFIuevBp-lkp@intel.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xiaoyan Li <lixiaoyan@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230405071556.1019623-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 6 Apr 2023 09:34:47 +0000 (11:34 +0200)]
Merge branch 'net-dsa-microchip-ksz8-enhance-static-mac-table-operations-and-error-handling'
Oleksij Rempel says:
====================
net: dsa: microchip: ksz8: Enhance static MAC table operations and error handling
This patch series improves the Microchip ksz8 driver by refactoring
static MAC table operations for code reuse, implementing add/del_fdb
functions, and making better use of error values in
ksz8_r_sta_mac_table() and ksz8_w_sta_mac_table(). The changes aim to
provide a more robust and maintainable driver with improved error
handling.
====================
Link: https://lore.kernel.org/r/20230404101842.1382986-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Tue, 4 Apr 2023 10:18:42 +0000 (12:18 +0200)]
net: dsa: microchip: Utilize error values in ksz8_w_sta_mac_table()
To handle potential read/write operation failures, update
ksz8_w_sta_mac_table() to make use of the return values provided by
read/write functions.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Tue, 4 Apr 2023 10:18:41 +0000 (12:18 +0200)]
net: dsa: microchip: Make ksz8_w_sta_mac_table() static
Since ksz8_w_sta_mac_table() is only used within ksz8795.c, make it static
to limit its scope.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Tue, 4 Apr 2023 10:18:40 +0000 (12:18 +0200)]
net: dsa: microchip: ksz8_r_sta_mac_table(): Utilize error values from read/write functions
Take advantage of the return values provided by read/write functions in
ksz8_r_sta_mac_table() to handle cases where read/write operations may
fail.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Tue, 4 Apr 2023 10:18:39 +0000 (12:18 +0200)]
net: dsa: microchip: ksz8_r_sta_mac_table(): Avoid using error code for empty entries
Prepare for the next patch by ensuring that ksz8_r_sta_mac_table() does
not use error codes for empty entries. This change will enable better
handling of read/write errors in the upcoming patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Tue, 4 Apr 2023 10:18:38 +0000 (12:18 +0200)]
net: dsa: microchip: ksz8: Make ksz8_r_sta_mac_table() static
As ksz8_r_sta_mac_table() is only used within ksz8795.c, there is no need
to export it. Make the function static for better encapsulation.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Tue, 4 Apr 2023 10:18:37 +0000 (12:18 +0200)]
net: dsa: microchip: ksz8: Implement add/del_fdb and use static MAC table operations
Add support for add/del_fdb operations and utilize the refactored static
MAC table code. This resolves kernel warnings caused by the lack of fdb
add function support in the current driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Tue, 4 Apr 2023 10:18:36 +0000 (12:18 +0200)]
net: dsa: microchip: ksz8: Separate static MAC table operations for code reuse
Move static MAC table operations to separate functions in order to reuse
the code for add/del_fdb. This is needed to address kernel warnings
caused by the lack of fdb add function support in the current driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Leon Romanovsky [Thu, 30 Mar 2023 08:02:31 +0000 (11:02 +0300)]
net/mlx5e: Simulate missing IPsec TX limits hardware functionality
ConnectX-7 devices don't have ability to send TX hard/soft limits
events. As a possible workaround, let's rely on existing infrastructure
and use periodic check of cached flow counter. In these periodic checks,
we call to xfrm_state_check_expire() to check and mark state accordingly.
Once the state is marked as XFRM_STATE_EXPIRED, the SA flow rule is
changed to drop all the traffic.
Link: https://lore.kernel.org/r/94a5d82c0c399747117d8a558f9beebfbcf26154.1680162300.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Leon Romanovsky [Thu, 30 Mar 2023 08:02:30 +0000 (11:02 +0300)]
net/mlx5e: Generalize IPsec work structs
IPsec logic has two work structs which are submitted to same workqueue.
As a preparation to addition of new work which needs to be submitted
too, let's generalize struct mlx5e_ipsec_work.
Link: https://lore.kernel.org/r/285a1550242363de181bab3a07a69296f66ad9a8.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Leon Romanovsky [Thu, 30 Mar 2023 08:02:29 +0000 (11:02 +0300)]
net/mlx5e: Reduce contention in IPsec workqueue
IPsec workqueue shouldn't be declared as ordered queue with one work
per-CPU, and can be safely changed to be unordered with default number
of works per-CPU.
Link: https://lore.kernel.org/r/5dc224a4decd09c14f645d38173e1a1710802cd8.1680162300.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Leon Romanovsky [Thu, 30 Mar 2023 08:02:28 +0000 (11:02 +0300)]
net/mlx5e: Set IPsec replay sequence numbers
"ip xfrm state ..." command allows users to configure replay sequence
numbers with replay-seq* arguments for RX and replay-oseq* for TX.
Add the needed driver logic to support setting them.
Link: https://lore.kernel.org/r/a9b17827eff2b29a4951225efa684a6cd38f74fe.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Leon Romanovsky [Thu, 30 Mar 2023 08:02:27 +0000 (11:02 +0300)]
net/mlx5e: Remove ESN callbacks if it is not supported
There is no need in implementation of .xdo_dev_state_advance_esn() and
setting work as it will never be called in packet offload mode.
Link: https://lore.kernel.org/r/2fc9fade32e31f03b100d6086a82ad36269349dc.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Leon Romanovsky [Thu, 30 Mar 2023 08:02:26 +0000 (11:02 +0300)]
xfrm: don't require advance ESN callback for packet offload
In packet offload mode, the hardware is responsible to manage
replay window and advance ESN. In that mode, there won't any
call to .xdo_dev_state_advance_esn callback.
So relax current check for existence of that callback.
Link: https://lore.kernel.org/r/9f3dfc3fef2cfcd191f0c5eee7cf0aa74e7f7786.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Song Yoong Siang [Tue, 4 Apr 2023 04:48:23 +0000 (12:48 +0800)]
net: stmmac: Add queue reset into stmmac_xdp_open() function
Queue reset was moved out from __init_dma_rx_desc_rings() and
__init_dma_tx_desc_rings() functions. Thus, the driver fails to transmit
and receive packet after XDP prog setup.
This commit adds the missing queue reset into stmmac_xdp_open() function.
Fixes:
f9ec5723c3db ("net: ethernet: stmicro: stmmac: move queue reset to dedicated functions")
Cc: <stable@vger.kernel.org> # 6.0+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230404044823.3226144-1-yoong.siang.song@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shenwei Wang [Mon, 3 Apr 2023 22:23:02 +0000 (17:23 -0500)]
net: stmmac: dwmac-imx: use platform specific reset for imx93 SoCs
The patch addresses an issue with the reset logic on the i.MX93 SoC, which
requires configuration of the correct interface speed under RMII mode to
complete the reset. The patch implements a fix_soc_reset function and uses
it specifically for the i.MX93 SoCs.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230403222302.328262-2-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shenwei Wang [Mon, 3 Apr 2023 22:23:01 +0000 (17:23 -0500)]
net: stmmac: add support for platform specific reset
This patch adds support for platform-specific reset logic in the
stmmac driver. Some SoCs require a different reset mechanism than
the standard dwmac IP reset. To support these platforms, a new function
pointer 'fix_soc_reset' is added to the plat_stmmacenet_data structure.
The stmmac_reset in hwif.h is modified to call the 'fix_soc_reset'
function if it exists. This enables the driver to use the platform-specific
reset logic when necessary.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230403222302.328262-1-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Tue, 4 Apr 2023 07:24:11 +0000 (15:24 +0800)]
selftests: net: rps_default_mask.sh: delete veth link specifically
When deleting the netns and recreating a new one while re-adding the
veth interface, there is a small window of time during which the old
veth interface has not yet been removed. This can cause the new addition
to fail. To resolve this issue, we can either wait for a short while to
ensure that the old veth interface is deleted, or we can specifically
remove the veth interface.
Before this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
RTNETLINK answers: File exists
changing rps_default_mask in child ns don't affect the main one[ ok ]
cat: /sys/class/net/vethC11an1/queues/rx-0/rps_cpus: No such file or directory
changing rps_default_mask in child ns affects new childns devices./rps_default_mask.sh: line 36: [: -eq: unary operator expected
[fail] expected 1 found
changing rps_default_mask in child ns don't affect existing devices[ ok ]
After this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
changing rps_default_mask in child ns don't affect the main one[ ok ]
changing rps_default_mask in child ns affects new childns devices[ ok ]
changing rps_default_mask in child ns don't affect existing devices[ ok ]
Fixes:
3a7d84eae03b ("self-tests: more rps self tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20230404072411.879476-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Greg Ungerer [Tue, 4 Apr 2023 05:22:07 +0000 (15:22 +1000)]
net: fec: make use of MDIO C45 quirk
Not all fec MDIO bus drivers support C45 mode transactions. The older fec
hardware block in many ColdFire SoCs does not appear to support them, at
least according to most of the different ColdFire SoC reference manuals.
The bits used to generate C45 access on the iMX parts, in the OP field
of the MMFR register, are documented as generating non-compliant MII
frames (it is not documented as to exactly how they are non-compliant).
Commit
8d03ad1ab0b0 ("net: fec: Separate C22 and C45 transactions")
means the fec driver will always register c45 MDIO read and write
methods. During probe these will always be accessed now generating
non-compliant MII accesses on ColdFire based devices.
Add a quirk define, FEC_QUIRK_HAS_MDIO_C45, that can be used to
distinguish silicon that supports MDIO C45 framing or not. Add this to
all the existing iMX quirks, so they will be behave as they do now (*).
(*) it seems that some iMX parts may not support C45 transactions either.
The iMX25 and iMX50 Reference Manuals contain similar wording to
the ColdFire Reference Manuals on this.
Fixes:
8d03ad1ab0b0 ("net: fec: Separate C22 and C45 transactions")
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230404052207.3064861-1-gerg@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adham Faris [Wed, 15 Mar 2023 14:36:22 +0000 (16:36 +0200)]
net/mlx5e: Fix SQ SW state layout in SQ devlink health diagnostics
Remove nesting level before SQ's SW state title and before SQ's SW
state capabilities line.
Preceding the SQ's SW state with a nameless nesting, wraps the inner SW
state map/dictionary with a nameless dictionary which is prohibited in
JSON file format.
Removing preceding SW state nest by removing function call
devlink_fmsg_obj_nest_start() and devlink_fmsg_obj_nest_end().
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Adham Faris [Wed, 15 Mar 2023 13:12:45 +0000 (15:12 +0200)]
net/mlx5e: Fix RQ SW state layout in RQ devlink health diagnostics
Remove nesting level before RQ's SW state title and before RQ's SW
state capabilities line.
Preceding the RQ's SW state with a nameless nesting, wraps the inner SW
state map/dictionary with a nameless dictionary which is prohibited in
JSON file format.
Removing preceding SW state nest by removing function call
devlink_fmsg_obj_nest_start() and devlink_fmsg_obj_nest_end().
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>