bitbake: hob: Hob should ask for ports only when Manual proxy is selected

[YOCTO #5307]
(Bitbake rev: 09b3e4e1e3fac737ea4069457e8bbffe1a4fe09d)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: cooker/command: Add error state for the server and use for pre_serve errors

Currently if errors occur when starting the PR service, there is a race that
occurs since the UI runs various commands including starting builds before
processing the CookerExit(). By adding the error state and refusing to run
async commands in this mode, builds are prevented from starting and the
UI reaches the exit code with the system shutting down cleanly.

(Bitbake rev: 42fa34142ea685f91115a551e74416ca28ef1c91)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake: Update post 1.20 to development version

(Bitbake rev: 03d051b6da52ec4ee26f97aa9038622f8d87e55d)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes: add aarch64_be target

Add big endian ARMv8 target to OE infrastructure

(From OE-Core rev: 570ae1afecc88b12a11e62a4341069c125d18403)

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libarchive: Add -native version needed for pixz

(From OE-Core rev: 7c4f4231dfeb5d7599f18e4b2fbb5a8a6427c01a)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

glib-networking: upgrade to 2.38.0 and PACKAGECONFIGise

Use PACKAGECONFIG to add options for ca-certificates, gnutls, and libproxy.

Enable ca-certificates by default as all it needs to know is the right path,
ca-certificates not being installed isn't fatal.

(From OE-Core rev: 1f03b6aa9e475f341815788613513ff63add8a5f)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

automake: update to upstream version 1.13.4

prefer-cpio-over-pax-for-ustar-archives.patch updated to apply

(From OE-Core rev: fa026cd7bf05fcc447433c1cc073b290db7d77fa)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

automake: unhardcode version number

Use trim_version to get version part of the executable name.

(From OE-Core rev: af0f93059510fb4ccbe7b1497bda8dd8370245a5)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kconfig-frontends: Update to 3.11.0.0

(From OE-Core rev: 58830afb94e858aa06313b0855c34ca1466a2a6d)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sqlite3: update to 3.8.0.2

(From OE-Core rev: 7ef9ebdc332e23ed27848cad998f0cb6e6601f99)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libpng: Update to 1.6.6

License Checksum changed due to date updates in files and lines moving.

(From OE-Core rev: f2065a3388cdbb4586bf5a808455a011b557de11)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lsbinitscripts: Update to 9.50

(From OE-Core rev: 06af5c562251f3b7c6dff2436095222dfac9300c)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tzdata: Update to 2013g

Add the README to LIC_FILES_CHKSUM and update LICESE since it now
mentions that some files are licensed under BSD

(From OE-Core rev: b1b02835b30e44cd923c57ac5a77de8fc1e0e474)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tzcode: Update to 2013g

The updated README now mentions that some files are derived from BSD,
so update the LICENSE to be PD & BSD.

(From OE-Core rev: 063f67f5ecbe6edc226e1a25b5b8387881592c34)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

file: Update to 5.15

(From OE-Core rev: bb19c6c88abcfb0cb2c6279dc2b0e4f348e34a9e)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

util-macros: upgrade to 1.17.1

(From OE-Core rev: ab26a1d5854e3b76919907332802c88e46cbb7e8)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rsync: upgrade to 3.1.0

(From OE-Core rev: d889135b40ab5cb113d454207201b98f8e598173)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

man-pages: upgrade to 3.54

(From OE-Core rev: f6cda544452b6a495c84bcc42cec9c03e6102661)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libbsd: upgrade to 0.6.0

(From OE-Core rev: c9b52f8b0706f4eaa60fc46b98cf4617657e5cf3)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

desktop-file-utils-native: upgrade to 0.22

(From OE-Core rev: e969c626359a42ea7967847e194fa86b2ceff93c)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cups: upgrade to 1.6.4

(From OE-Core rev: b92d1d9bf3fbfd92d0baec7939e06505eaf45f09)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

at-spi2-gtk: upgrade to 2.10.0

(From OE-Core rev: 53b2c9e3a0a3b355c785299f9699dff70f81fd9b)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

at-spi2-core: upgrade to 2.10.0.

(From OE-Core rev: d88fa648ac264a593a8d09998302f4e151957437)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

atk: upgrade to 2.10.0.

(From OE-Core rev: 3f2ee8853f4713cc8c068e81722d6c60ada53e1d)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

glib-2.0: upgrade to 2.28.0

Drop the ptest patches and instead use --enable-installed-tests, updating
run-ptest to invoke gnome-desktop-testing-runner.

Drop the x32 build patch, upstream has integrated a similar fix.

(From OE-Core rev: 33bb8d5da050519043bb913bae4f5692bbd899ad)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gnome-desktop-testing: add

gnome-desktop-testing is a test runner for GNOME-style Installed Tests, and will
be used by run-ptest to execute these unit test suites.

(From OE-Core rev: 4657b9a35e276b0891729d43f33db49ee5e3ae7d)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-video-vesa: upgrade to 2.3.3

Drop Remove-mibstore.h.patch as that was a backport from git and is integrated
into 2.3.3.

(From OE-Core rev: cce5f8ea5ecf87c506be1c5e21d5058fbe953143)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxpm: upgrade to 3.5.11

License checksum changed as a typo was fixed upstream.

(From OE-Core rev: e7c3969b37f5ddbd83c1956f72a4cfb4d1060b66)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxmu: upgrade to 1.1.2

License checksum changed as some missing copyright notices and dates were added.

(From OE-Core rev: 2516c3a84c7ab146937ff85dbe03df841aec3906)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libsm: upgrade to 1.2.2

(From OE-Core rev: 688e9a9f650fc14991dd62b6d537a02700c4095f)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

ltp: update to new release 20130904

(From OE-Core rev: 5d6ef973fe101bb3547a14452ded79536d9d2582)

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

connman: Upgrade to v1.18

This release contains a few important bugfixes in addition
to a few new features.

(From OE-Core rev: e69442ebca53fe36988fcf76a9c3a4cc5e3d9499)

Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sqlite3: update to version 3.8.0.1

Upgrade to latest version 3.8.0.1

(From OE-Core rev: b08de5ea62e34ac697a2911cf47b0eed42f1d7c0)

Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

insane: configure option checking

(From OE-Core rev: 1b51688d2ea5174334cc8a8a559461b2c4a15a77)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image types: split live into iso and hddimg

Changes to split live into iso and hddimg without
adding a new image type class.
This patch has only a visible effect on HOB and solves
part 2 of #3197

[YOCTO #3197]

(From OE-Core rev: f05ae5f57d9d1bd839fae0e3f353d4e0e303a183)

Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel: restore scripts in the sysroot

When building against the sysroot, out of tree modules can require modpost
and other utilities normally found in the kernel's scripts directory. For
the kernel source in the staging dir, these scripts have been removed to
avoid mixing archiectures when packaging kernel-dev (among other things).

Rather than further complicate the kernel's install rule, or its packaging,
we can restore the scripts by building them in the kernel staging directory
after the sstate is installed, making them available to packages that need them.

(From OE-Core rev: 5bcd65807aa634060f98928db6011856934dabe4)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxt: remove unused configure option

--disable-install-makestrs was removed in 1.0.8, released back in 2010.

(From OE-Core rev: b972a047ede781b9e0570c55e803245e405e529b)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pango: fix x11 DISTRO_FEATURE check

--without-x was removed in 1.32.0, so the correct option is now --without-xft.

Also remove --disable-glibtest, as configure.ac doesn't invoke that test.

(From OE-Core rev: e806f4ff404515f38318b6fed7d2b614c2138da6)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libmatchbox: remove unused configure options

These options appear to have never existed in libmatchbox, remove them.

(From OE-Core rev: e8853d58db75a1e1453f2d517fb533f086c2dab2)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtk+: remove unused configure options

--without-libjasper and --without-libtiff were removed when GTK+ and gdk-pixbuf
separated, in 2.22.0

(From OE-Core rev: d7aa6bf8d7702736e2bd81442ddef98869f40eae)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

update-rc: Stop and remove service if updating package

Since when updating packages packages managers do not remove the previous package,
it just replaces new files and run pre/post install scripts. This causes not
to update update-rc scripts if they were changed.

This patch is useful in case the newer package version updated the update-rc
script.

(From OE-Core rev: d91b08f3a27baa49ae35dc20dba1b2d76e6abd64)

Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qt4: add upstream QTBUG-31579 patch for QPainter regression

(From OE-Core rev: a5afc67cbfc32beb3be10392bf9788cfc3610ab1)

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

connman: Remove obsolete configurations from EXTRA_OECONF

--enable-threads and --enable-fake are obsolete, unrecognized options
for connman now.

(From OE-Core rev: f93ac05acafb9ebf4fa4f35e4f1b7780d3d8a5e9)

Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

separatebuilddir: remove entries for imake and xorg-cf-files

Imake and the associated xorg-cf-files recipes were removed.

(From OE-Core rev: d4e627b846f5b0f435748e9403cb51b553271047)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xorg-lib-common: fix malloc0returnsnull usage

Xorg libraries that use Xmalloc need to know if malloc(0) returns NULL or not,
and as this is a runtime test it can't be checked for.  Previously
xorg-lib-common declared that malloc(0) did return NULL, but this isn't true for
eglibc (only uclibc).

Instead, use libc-specific overrides to pass the relevant option.

(ideally the check would use the autoconf cache so this can be stored in the site files)

(From OE-Core rev: e628c8aba0189de30de2833882b9999ff3b6547a)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libav: Add libswscale to PACKAGES_DYNAMIC

Add libswscale to PACKAGES_DYNAMIC because it was missing. Adding it also allows libswscale to get included in an image using IMAGE_INSTALL.

(From OE-Core rev: b57e7fa8b35cfcf9af6ca72d51bdf67e49254ac2)

Signed-off-by: Diego Rondini <diego.ml@zoho.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sysvinit-inittab: Fix getting tty device name from SERIAL_CONSOLES entries

Currently the part after "tty" in the device name go into label along with
everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0"
than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100.
If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed.

(From OE-Core rev: b00b9ae5693e04cacd0843c12a529e7f3dc501ed)

Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kmod-native: use bswap to work on older Linux hosts

We can't use htobe* and be*toh functions because they are not
available on older versions of glibc, For example, shipped on Centos 5.5.

Change to directly calling bswap_* as defined in byteswap.h.

(From OE-Core rev: 63edb6b9a8bdf2f5541edd618f2f598185e37223)

Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake.conf: Remove double slash from PATH_prepend and PKG_CONFIG_DIR

* we correctly have
  ${STAGING_DIR_NATIVE}${base_sbindir_native}
  and then double slash in
  ${STAGING_DIR_NATIVE}/${base_bindir_native}
* similar in PKG_CONFIG_DIR where libdir also starts with slash
  ${STAGING_DIR_HOST}/${libdir}/pkgconfig
* also fix double slash in insane.bbclass and staging.bbclass
* I was a bit nervous about staging change (in case the / was important
  in some weird use-case, but the extra slash is there since following
  commit where other extra slashes were removed only the one before
  libdir was kept:

  commit 6ea78d648951e5bbe9669412c0863daaf7f49ca5
  Author: Richard Purdie <rpurdie@linux.intel.com>
  Date:   Mon Nov 2 17:10:51 2009 +0000

  autotools.bbclass: Separate out useful staging functions into
                     base.bbclass and call from autotools classes
* this isn't fixing any real-world issue AFAIK, I was just trying to
  debug one weird case where debugedit fails with
  canonicalization unexpectedly shrank by one character
  and it's easier to grep for '//' without many harmless instances
  already in run* scripts etc

(From OE-Core rev: 0ddaf52e9e344986ae2b016cc068d9eee71b4347)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

device_table-minimal.txt: change group of /dev/hda back to disk

The group for /dev/hda should be disk instead of root.
The group ID for /dev/hda was 6, but it was modified to be root by
accident in the following commit.

 commit c5ef0294a9b8d178896a47c9f5d6e3dd6797e343
     device_table-minimal.txt: use user/group names instead of uid/gid

This patch changes it back.

(From OE-Core rev: 5c5db302400894c2bb1f4052d0f120738589c128)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/package: handle filenames containing wildcards

It is uncommon, but it is possible for upstream sources to contain files
that have wildcard characters in their names (Webmin is an example).
Because we were running glob.glob() on every entry in the list of
entries in FILES and then adding the result to the files list to be
processed, the process would loop infinitely if files whose names
contained wildcard characters were present. Fix this by avoiding
re-processing the output of glob.glob() with itself, and also "escape"
wildcard characters in FILES entries added automatically from
do_split_packages().

Fixes [YOCTO #1676].

(From OE-Core rev: 1aa3fbb547b0e21455f0dcc9b72ded08dc0efd67)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel.bbclass: unset LDFLAGS when run devshell in kernel recipe

When user runs devshell in kernel recipe and compiles kernel,
this will fail by unrecognized option of LD.

----
$ make
...
arm-poky-linux-gnueabi-ld: unrecognized option '-Wl,-O1'
arm-poky-linux-gnueabi-ld: use the --help option for usage information
----

This set to empty LDFLAGS when user runs the devshell, and solve this problem.

(From OE-Core rev: e36ac3ab3a7fe02c7eeb3998ff33c001ab795841)

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

telepathy-mission-control: Add PACKAGECONFIG for upower and connectivity

(From OE-Core rev: 8268ce9997e77a4ef6aa990ca7566cf3ed14c746)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

matchbox-wm: Add dependency on libxfixes and libxcursor

(From OE-Core rev: f0eb614f189c9ef22442b5265147d1f2392e7f72)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

uboot-config.bbclass: Raise an error for unknown configs

When passing the wrong value for UBOOT_CONFIG it ought to raise an
error otherwise it is quite difficult for user to notice it didn't
behave as expected.

Reported-by: Lauren Post <lauren.post@freescale.com>
(From OE-Core rev: 5110dc988e3b8a1ce8b2309e4ddf17abb3f1cb0c)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: integrate lxc kernel feature and 32 bit x86 config

Updating the meta branch SRCREV to incorporate the two following
configuration changes:

  452f067 lxc: Add lxc kernel config
  a249eba x86_32: Enable X86_32 and disable 64BIT explicitly

(From OE-Core rev: 64d4c508652bc5d8a0b4c01f0d0813e58d6b39a6)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: boot-live.cfg: Add CONFIG_ZISO=y

Updating the meta branch SRCREV with the following commit:

[
    The oe-core live class now fully support compressed ISO images this is
    the corresponding kernel change.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
]

(From OE-Core rev: af2ef5085e92ca6291dabb134a7a3fb194a21d7a)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.8: re-use common-pc-64 for hasswell-wc

Updating the meta branch SRCREV with the following commit:

[
    meta-haswell-wc: update bsp scc to use linux-yocto-3.8 standard/common-pc-64/base branch

    Remove "branch haswell-wc" from haswell-wc-standard.scc
    so that "haswell-wc" BSP uses standard/common-pc-64/base branch
    on linux-yocto-3.8 repo.

Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
]

(From OE-Core rev: 978c77cae12f69e05ad97c6edd03d292098fff88)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

utils.bbclass: Fix override ordering for FILESPATH

Currently the overrides are being applied backwards. This means something which is
platform specific is overriding something which is machine specific which
is clearly not intended.

This patch corrects the ordering to match the normal expected behaviour of
OVERRIDES.

Secondly, all overrides are being searched for each path in turn. What should
really happen is that we should look for the highest priority override (e.g. distro
or machine) in each layer, then move on to platform/tune (e.g. armv7a) and
then to arch (e.g. arm). This patch therefore also reverses the for loops
to achieve this behaviour and give the result the user would expect.

(From OE-Core rev: 92cbf7eeea553bfa24c7081473fa8bc4ebc1f552)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

alsa-state: Rename init script

Having a SRC_URI called ${PN} is asking for trouble. When extending FILESPATH,
alsa-state can be treated as a directory and copied over the contents of ${WORKDIR}
which is invariably not what the user wants.

Avoid this by renaming the SRC_URI to something else and only call
it alsa-state at install time.

(From OE-Core rev: 04c73333e4b539de96f096ca2954b2313175edc4)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gcc: Fix strange C++ repo issues

(From OE-Core rev: 9f6c4edf40963d1f3fb9f7e2d2b7a866aa1afe57)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: Add a missing '['

(From OE-Core rev: 68a7d9f0e19ed577854a04610efc902062a369a8)

Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

uboot-config.bbclass: Fix use without IMAGE_FSTYPES appending

Before checking if the image is a valid value, we need to check if the
list of items is big enough or we will raise an exception.

Reported-by: Lauren Post <lauren.post@freescale.com>
(From OE-Core rev: b833837cac377e7c1c3ff18531b152340b669329)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oe/path: Fix copytree functions for tar 1.27

tar version 1.27 returns:

tar: --same-order option cannot be used with -c

with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.

(From OE-Core rev: 69c26e795c117aabfaf313abbfd10e70ede633d9)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes: tar 1.27 fixes

tar version 1.27 returns:

tar: --same-order option cannot be used with -c

with the commandlines we have been using. We can remove the -s option (which
is --same-order) to remove the error.

(From OE-Core rev: 3d5a6d0a480a0fa98260a3b3ffc71b8d9e3e58af)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

build-appliance: Update SRCREV for release

(From OE-Core rev: bfea7c67dfbcb5f7bcd088c3a2ef99ed70951207)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

toolchain-scripts: Fix TARGET_SYS reference

There was a fix missing from a previous commit:

http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=20a86e16bc54b74fbdb2a3a407d54210ea262925

since there was another section of toolchain-scripts needing updating.
This patch fixes the missing reference and unbreaks the ADT toolchain.

[YOCTO #5340]

(From OE-Core rev: e1b8b4859f00b40fb941a07a394ed35e06541663)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

build-appliance: Update SRCREV for release

(From OE-Core rev: 1149b1fef8912f77d971242dfec151fff5a3aa51)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: hob: change tooltip for live images

This change is needed to inform the user that selecting
live type means that the system will build a hddimg and iso
image.

(Bitbake rev: 5051f59976de4e099bb434aeea414de5a67a069f)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake: replace comment added in conf files

The patch that implements removeConfigurationVar method was made before
merging the patch that replaces "added by bitbake" with "added by hob".
This patch corrects this issue.

[YOCTO #5284]
(Bitbake rev: 42601a5edef0316767b952b162123534aa8fee18)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake-dumpsig: introduce command line and error handling

This utility doesn't take any special arguments, but it's nice if it at
least knows how to deal with no arguments, --help and errors properly.

(Bitbake rev: 0cabdf1d0cde6687bc1372675a0d6242587c87a0)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake-diffsigs: improve error handling

* Set up a logger independent of BitBake so we can log errors ourselves
* Handle common errors without printing a traceback

(Bitbake rev: 77b5f5b8dca4deebb06eeb06a8e7f2ccdbfff46f)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake-diffsigs: refactor argument parsing slightly

* Use OptionParser to parse the two options to -t rather than trying to
  pick them out ourselves.
* Add a description shown with --help output

(Bitbake rev: daab42d19463b4108968fc88b207936e5ac84154)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake-diffsigs: handle if task name is specified without do_ prefix

Adjust the task name automatically if the -t option is specified with
a task name that doesn't start with do_ (e.g. "configure" instead of
"do_configure").

(Bitbake rev: d182cbc63745303ef2dc9fa2cbbf5d87a68e0b52)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bin/bitbake: Clarify server error message

Getting an error message about --remote-server being set when really
BBSERVER was is confusing, clarify the message.

(Bitbake rev: d7b5938a30a9b0ed83f899a06a88786e8392f8bd)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bin/bitbake: Clear ui-queue when starting a server

When starting a server we don't want to show the debug event queue which
is reserved for when when errors have occurred. This patch copies the UI
code to ensure the user doesn't see confusing output.

(Bitbake rev: a886cda58415085981646fb9a024fa7641f55865)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bin/bitbake: No need to show tracebacks for BBHandledExceptions

For BBHandledExceptions, we've already displaced a sensible error to
the user so we don't need to do it again. Just exit with an error
value.

(Bitbake rev: 1ff5ec26eba70ab1c85674a60b7dac77317bf349)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: xmlrpc: Show a better error message for connection failures

Showing a traceback when unable to connect to a bitbake server is
rather ugly. This change allows us to show a sensible error message.

(Bitbake rev: 26913202f83fbbecdce95da59515af102bcde4a7)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bin/bitbake: Catch establish connection log messages

If for example you try "bitbake -m" with an invalid BBSERVER, error
messages are not displayed. This change ensures logging is in place
to catch and display such errors.

(Bitbake rev: 719808f95adc7820fcc09743c592513414d03ce1)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake/hob: removing extra parameters from conf files using hob

In Hob settings, there is a tab to add/remove extra settings. This
patch implements a way to "remove" variables from conf files, through
bitbake. But, to keep the history assigment of the variables synchronized,
instead of removing, it replaces the lines with blank lines.

[YOCTO #5284]
(Bitbake rev: bd720fb63cef6b399619b8fbcaeb8d7710f2d6df)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: HOB: MACHINE should be saved in conf files using ?=

MACHINE var is saved using early assignment operator.
Calling  MACHINE=x bitbake core-image-... works properly.
Comment "#added by bitbake" is replaced with "#added by hob".

[YOCTO #5070]
(Bitbake rev: 2d0ec8ff083b636a6cf98de3278900eb95c3def6)

Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: utils: use logger.warn instead of print in copyfile

print disappears into the ether, so use logger.warn and clean up the messages.

(Bitbake rev: 90f91f7402ff69f3fe9fba5f94a53d371303ce34)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qemu: fix nativesdk build without x11

when x11 is not defined in DISTRO_FEATURES, there are no x11 headers
so True is not defined leading to :
| ui/sdl.c:62:8: warning: type defaults to 'int' in declaration of 'doing_grabs' [-Wimplicit-int]
|  static doing_grabs = True;
|         ^
| ui/sdl.c:62:22: error: 'True' undeclared here (not in a function)
|  static doing_grabs = True;
|                       ^

(From OE-Core rev: d3d5ccd3275196fb9e4cb8f49d3c087b97c20ed6)

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: Add PACKAGECONFIG for cryptsetup

(From OE-Core rev: 97b13a4938bf6879b0108a7716cf73c07e31544c)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

subversion: Add dependency on file for libmagic

(From OE-Core rev: 7ad12a3c2cb7ac2e134144be841b6ff1dff69ded)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lame: Add dependency on ncurses

* it's autodetected and configure doesn't allow to explicitly disable it

(From OE-Core rev: 983446c4f4274b9fd482b2d6b711428f4483c02f)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

glib-networking: Add PACKAGECONFIG for p11-kit

(From OE-Core rev: dd7cafed323415412a61d0be45c5f8a7865c5089)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

x11vnc: Add PACKAGECONFIG for xinerama

(From OE-Core rev: e67c37b5a4b7da42f55534e1911a06c9b1c13854)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tcl: Add dependency on zlib

(From OE-Core rev: 68309428b853acad39b50877091edfad7754d50c)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wget: Add dependency on libpcre

(From OE-Core rev: 8cf5b59d6274f2b4133228e6bfa7daecd8d658ee)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gstreamer1.0-libav: Add PACKAGECONFIG for orc

(From OE-Core rev: 9b86405b55bc663330f5c77e7240efd1fb5837da)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libunique: Add PACKAGECONFIG for dbus

* dbus-glib was missing in DEPENDS in order to enable dbus backend
  but because dbus was in DEPENDS lets enable this PACKAGECONFIG by
  default

(From OE-Core rev: c832c457ff40f0f65ab28c17b78b88cb79823db1)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

aspell: Add PACKAGECONFIG for curses

(From OE-Core rev: f8c2d27ef1366332900da8e0d7addeb8b265c5b0)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-input-synaptics: Add dependency on libxtst

(From OE-Core rev: 8865756e5706523ad644d4195962a78b661be9d1)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xdpyinfo: Add dependency on libxcomposite

(From OE-Core rev: 63eeecd7753383e2ec841781c844f4746cdf36e5)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python: Ensure build completes before install

At the start of install, python swizzles the makefiles around, leading
to chunks of do_compile running again. These race against the install
target, leading to errors if pieces are being recompiled whilst others
are being installed.

For now, workaround this by running the compile target with the new
makefile, then running install ensuring a parallel make race doesn't
happen.

(From OE-Core rev: 72938a8631cfe5be5ac88ad67f2db595e2487e86)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

run-postinst: Ensure that the postinsts are ordered

The postinst files were being generated using purely the name of the package,
this unfortunately meant the run order would be based on the name of the
package and not the order in which it was installed on the filesystem.

If package A requires package Z to be fully installed, this causes a problem.

Note:

rpm - as the rpm based install proceeds the order is defined and captured.
      so the problem is resolved there.

ipk - this unfortunately does not appear to solve the problem for ipk, as
      the status file is not ordered in any appreciable way.  This does not
      cause any regressions however and sets the stage for a proper fix.

deb - this -may- fix the deb install.  Early testing indicates at least some
      ordering to the status file.  But it's unclear if it completely resolves
      the issue.

(From OE-Core rev: b5bafccb89f45d7cdd515b4ba45e0152ca7922de)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_rpm.bbclass: Workaround failure in attemptonly installs

[YOCTO #5313]

When performing an attemptonly install, we should skip an errors and
continue to install everything else.  However, there is a case where two
packages can conflict, and cause a hard failure.

This workaround, ignores this and allows the image to be constructed.
Note: Some items in the failed transaction may not get installed.

To fix this properly we need to find the issue in smart, and make it ignore
or at least attempt to resolve these kinds of conflicts.

(From OE-Core rev: 4228005689e31ebcafcf0969e80fcc021d1ae063)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

oe-init-build-env-memres: Unset BBSERVER if already set

When starting a new server we don't want bitbake to connect to an existing
server so ensure BBSERVER is unset.

(From OE-Core rev: f54bb9e7897e6e68acb7b4f88d998fdb149a7e47)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

connman-conf: add a global public DNS to network provisioning

In case of QEMU machines, a global public DNS is provisioned,
as the network is not configured via DHCP.
Google's public global DNS server 8.8.8.8 is used.

Partial fix for [YOCTO #4587] (qemu machines case).

(From OE-Core rev: 05ebf5bbacc58315f1b33ffb80148d568f88855d)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>