Steve Hay [Tue, 1 Apr 2014 12:31:10 +0000 (13:31 +0100)]
Reword Windows makefile comments to explain the "help" logic about USE_MULTI
There is logic to auto-enable USE_MULTI if either USE_ITHREADS or USE_IMP_SYS
(which both require USE_MULTI) are enabled, but this is not mentioned in
the comments. Explain it so that users don't get confused when trying to
disable USE_MULTI.
Reported in [perl #121494].
Steve Hay [Sun, 30 Mar 2014 19:59:02 +0000 (20:59 +0100)]
Start updating perldelta for 5.19.11
Steve Hay [Sun, 30 Mar 2014 19:27:30 +0000 (20:27 +0100)]
Commit
b776cec188 missed these RMG steps when preparing Module::CoreList for 5.19.11
David Mitchell [Sat, 29 Mar 2014 19:35:37 +0000 (19:35 +0000)]
perldelta: /\C/ will be an error in 5.24
Update the recently added perldelta entry to say that /\C/ will become an
error rather than becoming equal to /./.
Steve Hay [Fri, 28 Mar 2014 22:05:29 +0000 (22:05 +0000)]
RMG - refer to BLEAD-POINT/BLEAD-FINAL releases for consistency and clarity
Steve Hay [Fri, 28 Mar 2014 21:53:10 +0000 (21:53 +0000)]
RMG - note that CPAN module upgrades are subject to code freeze restrictions
(As confirmed on p5p by RJBS on 24 March 2014.)
Steve Hay [Fri, 28 Mar 2014 21:40:49 +0000 (21:40 +0000)]
RMG - we no longer have UPSTREAM => 'undef' in Porting/Maintainers.pl
Chris 'BinGOs' Williams [Fri, 28 Mar 2014 14:02:51 +0000 (14:02 +0000)]
Maintainers.pl synchronised for CPAN release of ExtUtils-Install
Daniel Dragan [Thu, 27 Mar 2014 07:37:03 +0000 (03:37 -0400)]
fix killpg on Win32, to meet posix expectations for killpg
On Win32 Perls built without PERL_IMPLICIT_SYS, killpg from win32.c was
directly called by Perl_apply, yet killpg's return value had Win32
behavior, not POSIX behavior. Modify killpg token to have same meaning as
PerlProcKillpg/PerlProc_killpg has on PERL_IMPLICIT_SYS builds. Use a
macro rather than create a win32_killpg C function since win32_killpg would
be nothing but a call to win32_kill anyways. win32_kill contains the Win32
to POSIX semantics conversion code. Rename old killpg to my_killpg since
it has no use outside of win32.c. The psuedo-PID code in win32_kill also
played a factor in not writing a separate win32_killpg that calls
my_killpg. This fix is tested by kill0.t passing on
no-PERL_IMPLICIT_SYS builds.
[perl #121230]
Karl Williamson [Wed, 26 Mar 2014 18:36:54 +0000 (12:36 -0600)]
perlrebackslash, perlreref.pod: White space only
Fit verbatim lines into 79 columns
Karl Williamson [Wed, 26 Mar 2014 18:23:33 +0000 (12:23 -0600)]
Revert "Add support for test.valgrind parallel testing"
This reverts commit
f0aff2daa44923f600f6e1f2429a2add2214a9d5
"Add support for test.valgrind parallel testing"
This patch was accidentally pushed (by me); it breaks some things. We
will wait to add this support until after 5.20
David Mitchell [Wed, 26 Mar 2014 12:07:39 +0000 (12:07 +0000)]
Deprecate /\C/
For 5.20, just say its deprecated. We'll add a warning in 5.22
and change its behaviour in 5.24.
Tony Cook [Wed, 26 Mar 2014 03:31:57 +0000 (14:31 +1100)]
[perl #121366] avoid using an invalid SvPVX() in Perl_sv_pvn_force_flags
This would cause valgrind to complain about:
vec($Foo, 0, 1) = 1; # for example
when $Foo was undef, since SvPVX()[1] isn't initialized until the SV is
at least a SVt_PV.
[1] well, sv_u.svu_rv, but sv_u is a union, so the same memory is
initialized. This isn't technically legal from a C point of view,
but pointer types are compatible enough with each other for it to not
be an issue.
Chris 'BinGOs' Williams [Tue, 25 Mar 2014 20:48:56 +0000 (20:48 +0000)]
Update ExtUtils-MakeMaker to CPAN version 6.94
[DELTA]
6.94 Tue Mar 25 19:26:31 GMT 2014
No changes from 6.93_01
6.93_01 Mon Mar 24 16:53:31 GMT 2014
Bug fixes:
* Resolved a regression in MM_Unix.pm
(https://github.com/Perl-Toolchain-Gang/ExtUtils-MakeMaker/issues/96)
Chris 'BinGOs' Williams [Mon, 24 Mar 2014 20:07:54 +0000 (20:07 +0000)]
Synchronise versions in Maintainers.pl
David Mitchell [Mon, 24 Mar 2014 15:36:32 +0000 (15:36 +0000)]
[perl #121484] /m causing false negative
My recent commit
d0d4464849e2b30aee8 in re_intuit_start() reduced the
scope of a 'skip if multiline' check, so that certain optimisations
weren't being unnecessarily skipped. Unfortunately it didn't reduce the
scope enough, so a vital slen-- was being skipped in the
SvTAIL-but-don't-fail case.
This commit just moves the !multiline test further down, and updates the
commentary and condition formatting a bit.
bulk88 [Mon, 24 Mar 2014 01:01:15 +0000 (21:01 -0400)]
#121395 fix, on Win32 test.pl watchdog always blocks for entire timeout
See Perl RT #121395 for details.
Craig A. Berry [Sun, 23 Mar 2014 18:33:49 +0000 (13:33 -0500)]
Remove MM_TEST_ROOT feature from ExtUtils::Install tests.
This feature depended on test directories created on the fly being
in a predictable location, but as of
80af860fb39a3c6 they no longer
are. VMS systems released in the last 15 years or so don't even
need the feature, so the best path forward is to get rid of it.
A corresponding change was made in ExtUtils::MakeMaker 6.79_01 but
ExtUtils::Install maintains its own fork of the same test libraries.
Craig A. Berry [Sat, 22 Mar 2014 00:29:38 +0000 (19:29 -0500)]
Reduce excessive stat calls in glob on VMS.
When PERL_EXTERNAL_GLOB is defined (currently only on VMS, or on other
platforms when running miniperl), each item returned from the glob
operation is checked against a set of glob metacharacters, and then, if
it matches any of these characters, it's checked with lstat() to see if
it actually exists. Then it's passed through if it exists but skipped
otherwise. Presumably this is because returning the pattern unchanged
is how a shell glob indicates "no match."
It appears that the lstat() is necessary because glob metacharacters
are almost always valid filename characters on Unix, so it's the
only way to distinguish a funny-looking but real filename from the no
match case (oops -- indeterminate grammar). Since these filenames are
rare on Unix, lstat() is seldom called.
Enter VMS, where "external glob" is neither external, nor is it actually
a glob. It is a native wildcard-matching search built into Perl with
vms/vms.c's Perl_vms_start_glob(), which does return the original
pattern when there is no match, but that pattern will only contain
native wildcard characters, so the check for glob metacharacters is
really not the right thing to be doing. Moreover, glob metacharacters
such as dollar signs, brackets, and semicolons are extremely common in
native VMS paths, so in many common scenarios, the lstat() to see if the
file really exists gets triggered for every single file, which is
expensive.
This commit replaces, on VMS only, the check for glob metacharacters
with a check for VMS wildcard characters. A simple glob of a Perl
source tree becomes 60% faster on the first iteration and 80% faster on
subsequent iterations.
Thanks to Hein van den Heuvel, who reported the problem and explained
that a search operation should only be looking at directory files,
whereas a stat does I/O to the individual file header, resulting in a
massive increase in unnecessary I/O.
This closes [perl #121440].
Aaron Crane [Fri, 21 Mar 2014 10:29:59 +0000 (10:29 +0000)]
Add 5.19.10 announcement URL to list of epigraphs
And fix the error in the author's name; it's John Chadwick and Michael
Ventris, not the other way round.
Aaron Crane [Thu, 20 Mar 2014 22:57:16 +0000 (22:57 +0000)]
Prepare Module::CoreList for next release
Aaron Crane [Thu, 20 Mar 2014 22:46:48 +0000 (22:46 +0000)]
Bump to Perl version 5.19.11
Aaron Crane [Thu, 20 Mar 2014 22:37:34 +0000 (22:37 +0000)]
New perldelta for 5.19.11
Aaron Crane [Thu, 20 Mar 2014 22:39:25 +0000 (22:39 +0000)]
Record the 5.19.10 epigraph
The announcement URL is not yet available, but will be filled in soon.
Aaron Crane [Thu, 20 Mar 2014 19:38:03 +0000 (19:38 +0000)]
Merge release branch for Perl 5.19.10
Aaron Crane [Thu, 20 Mar 2014 18:07:06 +0000 (18:07 +0000)]
Update perlhist for 5.19.10
Aaron Crane [Thu, 20 Mar 2014 18:01:33 +0000 (18:01 +0000)]
Finalise perldelta for 5.19.10
Aaron Crane [Thu, 20 Mar 2014 16:36:48 +0000 (16:36 +0000)]
Update Module::CoreList for 5.19.10
Aaron Crane [Thu, 20 Mar 2014 17:13:56 +0000 (17:13 +0000)]
Porting/corelist-perldelta.pl: fix bug with 5.*.10 releases
The two aliases of the new Perl version (in this case, "5.01901" and
"5.019010") were being selected as the two versions to compare.
Unsurprisingly, those two versions have the same modules, so the
generated summary of changes was empty.
Aaron Crane [Thu, 20 Mar 2014 17:13:39 +0000 (17:13 +0000)]
Porting/corelist-perldelta.pl: fix minor POD error
Aaron Crane [Thu, 20 Mar 2014 17:12:57 +0000 (17:12 +0000)]
Porting/corelist-perldelta.pl: fix typo in error message
Aaron Crane [Thu, 20 Mar 2014 15:54:11 +0000 (15:54 +0000)]
Upgrade Devel::PPPort from 3.21 to 3.22
[DELTA]
* Add support for the following API
SvREFCNT_dec_NN
mg_findext
sv_unmagicext
* Update META
Move bug tracker to github
Provide link to repository
Aaron Crane [Thu, 20 Mar 2014 13:32:16 +0000 (13:32 +0000)]
Update perldelta for recent core changes
Aaron Crane [Thu, 20 Mar 2014 15:31:34 +0000 (15:31 +0000)]
ExtUtils-Install-1.63 has been released to CPAN
Nicholas Clark [Wed, 19 Mar 2014 10:30:07 +0000 (11:30 +0100)]
The linux hints file should only look for -lgdbm_compat if -lgdbm is wanted.
Previously they would unconditionally add gdbm_compat to the list of wanted
libraries. This is unhelpful if the user has passed Configure arguments to
constrain the library search to avoid libgdbm.so, because Configure would
still end up finding libgdbm_compat.so, which at best is not useful without
libgdbm.so, and at worse could have the same problems that caused the
user to avoid libgdbm.so (eg not compatible with the current compiler flags)
Ricardo Signes [Thu, 20 Mar 2014 14:00:56 +0000 (10:00 -0400)]
sync-with-cpan: allow digits after -TRIAL
Aaron Crane [Thu, 20 Mar 2014 12:39:20 +0000 (12:39 +0000)]
hv.h: tweak comment about HvAUX preallocation for large hashes
Aaron Crane [Wed, 19 Mar 2014 16:15:21 +0000 (16:15 +0000)]
Upgrade CPAN from 2.03-TRIAL to 2.04-TRIAL
[DELTA]
2014-03-18 Andreas Koenig <k@UX31A>
* release 2.04-TRIAL
* history of master branch was rewritten after Tour de France bughunting
(Lyon #QA2014); apologies to all repository followers: the real history,
as it actually went, is not worth being recorded in the master branch.
* address #91706 and #86915: the 'force install' bug and the endless
loop bugs reported in the two tickets are fixed (joined forces)
* new configure option 'use_prompt_default' (David Golden)
* add new dummy distros OptionalPrereq and CircularPrereq for testing
recommends/suggests support
* experimental recommends/suggests support (David Golden, Andreas Koenig)
* enable hiding of directories in the distroprefs tree (suggested by
Slaven Rezić)
David Mitchell [Wed, 19 Mar 2014 19:28:47 +0000 (19:28 +0000)]
[MERGE] audit anchoring in re_intuit_start()
This series of commits audits all the code in re_intuit_start()
that handles anchoring, e.g. /^.../, /^.../m, /\G.../.
It fixes a couple of potential performance issues, and makes the code a
lot safer with with \G. (Until recently, intuit was skipped altogether
under \G, so its \G handling isn't well developed and tested.)
David Mitchell [Wed, 19 Mar 2014 18:05:24 +0000 (18:05 +0000)]
re_intuit_start(): move comments abut IMPLICIT
After the previous reworking of the PREGf_IMPLICIT tests, move commentary
about PREGf_IMPLICIT closer to where its now relevant.
David Mitchell [Wed, 19 Mar 2014 17:37:20 +0000 (17:37 +0000)]
re_intuit_start(): don't unset MBOL on uselessness
When BmUSEFUL() for a pattern goes negative, we unset ~RXf_USE_INTUIT.
A bug fix in 2010 (
c941595168) made this part of the code also remove
the RXf_ANCH_MBOL at the same time, if PREGf_IMPLICIT was set.
However, this was really just working round a bug in regexec_flags().
Once intuit was disabled, regexec_flags() would then start taking the
buggy code path.
This buggy code path was separately fixed in 2012 by
21eede782, so there's
no longer any need to remove this flag. So don't.
David Mitchell [Wed, 19 Mar 2014 16:44:25 +0000 (16:44 +0000)]
re_intuit_start(): change definition of ml_anch
The ml_anch variable is supposed to indicate that a multi-line match is
possible, i.e. that the regex is anchored to a \n.
Currently we just do
ml_anch = (prog->intflags & PREGf_ANCH_MBOL);
However, MBOL is also set on /.*..../; the two cases are distinguished by
adding the PREGf_IMPLICIT flag too.
So at the moment we have lots of tests along the lines of
if (ml_anch && !(prog->intflags & PREGf_IMPLICIT))
Simplify this by adding the IMPLICIT condition when initially calculating
ml_anch, so there's no need to keep testing for it later. This also means
that ml_anch actually means what it says now.
David Mitchell [Wed, 19 Mar 2014 16:34:28 +0000 (16:34 +0000)]
re_intuit_start(): check for IMPLICIT in abs anch
The block of code that deals with absolute anchors looks like:
if (...) {
if (.... && !PREGf_IMPLICIT) ...;
if (FOO) {
assert(!PREGf_IMPLICIT);
....
}
}
where the constraints of FOO imply PREGf_IMPLICIT, as shown by the
assertion. Simplify this to:
if (... && !PREGf_IMPLICIT) {
if (....) ...;
if (FOO) {
....
}
}
David Mitchell [Wed, 19 Mar 2014 14:58:19 +0000 (14:58 +0000)]
re_intuit_start(): check for IMPLICIT in stclass
In the stclass block of code, there are various checks for anchored-ness.
Add !(prog->intflags & PREGf_IMPLICIT) to these conditions, since
from the perspective of these tests, we can only quit early etc if these
are real rather than fake anchors.
As it happens, this currently makes no logical difference, since an
PREGf_IMPLICIT pattern starts with .*, and so more or less by definition
can't have an stclass.
So this commit is really only for logical completeness, and to allow us to
change the definition of ml_anch shortly.
David Mitchell [Tue, 18 Mar 2014 23:36:20 +0000 (23:36 +0000)]
re_intuit_start(): use better limit on anch float
The 'check' block of code has special handling for if the pattern is
anchored; in this case, it allows us to set an upper bound on where a
floating substring might match; e.g. in
/^..\d?abc/
the floating string can't be more than 3 chars from the absolute beginning
of the string. Similarly with /..\G\d?abc/, it can't be more than 3 chars
from the start position (assuming that position been calculated correctly
by the caller).
However, the current code used rx_origin as the base for the offset
calculation, rather than strbeg/strpos as appropriate. This meant that
a) the first time round the loop, if strpos > strbeg, then the upper bound
would be set higher than needed;
b) if we ever go back to restart: with an incremented rx_origin, then the
upper limit is recalculated with more wasted slack at the latter end.
This commit changes the limit calculation, which reduces the following
from second to milliseconds:
$s = "abcdefg" x 1_000_000;
$s =~ /^XX\d{1,10}cde/ for 1..100;
It also adds a quick test to skip hopping when the result is likely to
leave end_point unchanged, and adds an explicit test for !PREGf_IMPLICIT.
This latter test isn't strictly necessary, as if PREGf_IMPLICIT were set,
it implies that the pattern starts with '.*', which implies that
prog->check_offset_max == SSize_t_MAX, which is already tested for.
However, it makes the overall condition more comprehensible, and makes it
more robust in the face of future changes.
David Mitchell [Tue, 18 Mar 2014 21:32:39 +0000 (21:32 +0000)]
re_intuit_start(): do 'not at start' check on BOL
The quick reject test that says "if a pattern has an absolute anchor,
then immediately reject if strpos != strbeg", currently skips that test
if PREGf_ANCH_GPOS is present. Instead, skip unless BOL or SBOL is present.
This means that something like /^abc\G/ will still do the quick reject
test.
I can't think of any example that will actually give a measurable
performance boost, and this is a fairly unlikely scenario, but the code is
more logical this way, and makes it more robust against future changes
(it's less likely to suddenly skip the quick test where it used to do it).
I've also updated the commentary on why we don't do a quick /\G/ test
akin to the /^/ test, and added some more info about why we test for the
PREGf_IMPLICIT flag.
And I've added an assert about PREGf_IMPLICIT too.
David Mitchell [Tue, 18 Mar 2014 20:15:27 +0000 (20:15 +0000)]
re_intuit_start(): reduce scope of /^...$/m test
Intuit has a quick reject test for a fixed pattern that is anchored at
both ends. For example, with the pattern /^abcd$/, only the exact strings
"abcd" or "abcd\n" will match; anything else, and the match immediately
fails.
A fix for [perl #115242] correctly made intuit skip the test in the
presence of //m, since in this case the $ doesn't necessarily correspond
to the end of the string.
However, the fix was too wide in scope; it caused //m patterns to skip
searching for a known string anchored just at the start, as well as one
anchored at both ends.
With this commit, the following code now runs in a few milliseconds rather
than a few seconds on my machine:
$s = "abcdefg" x 1_000_000;
$s =~ /(?-m:^)abcX?fg/m for 1..100;
David Mitchell [Tue, 18 Mar 2014 16:10:59 +0000 (16:10 +0000)]
re_intuit_start(): change !ml_anch debugging msg
When MBOL (/^.../m) matching is skipped, the debugging output looks like:
Starting position does not contradict /^/m...
which sounds a bit like the \n test *was* done and passed, rather than
the test being skipped. Change the message to:
(multiline anchor test skipped)
David Mitchell [Tue, 18 Mar 2014 15:26:00 +0000 (15:26 +0000)]
re_intuit_start(): don't set ml_anch on BOL
re_intuit_start() decided that a pattern was capable of being anchored
after *any* \n in the string for a //m pattern that contains a BOL
(rather than an MBOL). This can happen by embedding one regex in another
for example.
This is an incorrect assumption, and means that intuit() might try
against every \n position in the string rather than just trying at the
beginning. With this commit, the following code on my machine reduces in
execution time from 7000ms to 5ms:
my $r = qr/^abcd/;
my $s = "abcd-xyz\n" x 500_000;
$s =~ /$r\d{1,2}xyz/m for 1..200;
Aaron Crane [Wed, 19 Mar 2014 16:56:09 +0000 (16:56 +0000)]
Porting/sync-with-cpan: allow "-TRIAL" version numbers
Nicholas Clark [Wed, 19 Mar 2014 10:03:04 +0000 (11:03 +0100)]
Merge the refactoring of Perl_do_openn() to blead.
This makes Perl_do_openn() a wrapper around two functions Perl_do_open_raw()
and Perl_do_open6(), which provide sysopen and open functionality.
In turn, shared setup and cleanup code from these two is moved to two static
functions S_openn_setup() and S_openn_cleanup().
For now both functions are not part of the public API, as they may change,
and offer no functionality that isn't already accessible via Perl_do_openn().
These changes make it easi*er* to follow the twisted logic of open.
Nicholas Clark [Sun, 2 Mar 2014 09:12:08 +0000 (10:12 +0100)]
In Perl_nextargv(), move variable declarations into the blocks that use them.
This makes it clearer that variables don't hold values between iterations of
the loop, and permits the variable sv to be made const.
Nicholas Clark [Sun, 2 Mar 2014 09:02:51 +0000 (10:02 +0100)]
Simplify the code in Perl_nextargv().
Split the ternary that called Perl_do_open_raw() and Perl_do_open6() based
on PL_inplace into two different if blocks, and merge these with the following
code which is also conditional on PL_inplace.
Remove the warning code from an else block and re-indent it, to make it clear
that it is always called if control reaches the end of the while loop.
Nicholas Clark [Sun, 2 Mar 2014 08:50:38 +0000 (09:50 +0100)]
Change core uses of Perl_do_openn() to Perl_do_open6() or Perl_do_open_raw().
Calls to Perl_do_openn() all have at least 2 unused arguments which clutter
the code and hinder easy understanding. Perl_do_open6() and
Perl_do_open_raw() each only do one job, so don't have the dead arguments.
Nicholas Clark [Sun, 2 Mar 2014 08:26:29 +0000 (09:26 +0100)]
Split Perl_do_openn() into Perl_do_open_raw() and Perl_do_open6().
Perl_do_open_raw() handles the as_raw part of Perl_do_openn().
Perl_do_open6() handles the !as_raw part of Perl_do_openn().
do_open6() isn't a great name, but I can't see an obvious concise name that
covers 2 arg open, 3 arg open, piped open, implicit fork, and layers.
Nicholas Clark [Sun, 2 Mar 2014 07:14:13 +0000 (08:14 +0100)]
Extract the cleanup code of Perl_do_openn() into S_openn_cleanup().
A 12 parameter function is extremely ugly (as demonstrated by the need to add
macros for it to perl.h), but it's private, and it will permit the two-headed
public interface of Perl_do_openn() to be simplified.
Nicholas Clark [Sun, 2 Mar 2014 06:38:00 +0000 (07:38 +0100)]
Extract the setup code of Perl_do_openn() into S_openn_setup().
Nicholas Clark [Sat, 1 Mar 2014 21:53:52 +0000 (22:53 +0100)]
In Perl_do_openn(), disambiguate the two separate uses of the variable fd.
Rename the first uses of the variable fd to wanted_fd to show that the
variable is not used to pass a value to later in the function.
Nicholas Clark [Sat, 1 Mar 2014 21:38:18 +0000 (22:38 +0100)]
In Perl_do_openn(), move the variable result into the block that uses it.
This also removes a couple of places which would set result = 0 to simulate
"success" for an a later if block. Those paths now don't even reach that
if block.
Nicholas Clark [Sat, 1 Mar 2014 20:32:19 +0000 (21:32 +0100)]
Perl_do_openn() doesn't need to set num_svs and svp.
These variables are no longer used later in the function, so no need to set
them. This permits the declaration of the variable namesv to be moved from
the top of the function into the blocks that use it.
Nicholas Clark [Sat, 1 Mar 2014 20:10:38 +0000 (21:10 +0100)]
Perl_do_openn() should call PerlIO_openn() with arg NULL if narg is 0.
If narg is NULL, then PerlIO_openn() doesn't look at args.
(Technically except for PerlIOStdio_open() if f is non-NULL, which doesn't
check narg and assumes that args[0] is valid. That lack of check is probably
a bug. But it doesn't matter in this case, as f is NULL)
This makes it clear that arg isn't needed at this point in Perl_do_openn().
This is a more complete version of the change made by commit
dd37d22f759197ae
(March 2002), which just changed the call to pass 0 for narg.
Nicholas Clark [Sat, 1 Mar 2014 21:00:29 +0000 (22:00 +0100)]
In Perl_do_openn(), move {in,out}_{raw,crlf} into the !as_raw block.
These 4 variables are only needed there, so by moving them into the block we
save doing unneeded work for the as_raw case (ie sysopen), and as a side
effect make the function a bit clearer.
Nicholas Clark [Sun, 2 Mar 2014 14:36:52 +0000 (15:36 +0100)]
Tests that warnings are emitted if in-place edit fails to open a pathname.
These have the same text as other warnings which are tested. However the
existing tests only covered the code path where a directory was able to be
opened (read only) and then caught by an explicit stat test for non-files.
Aaron Crane [Tue, 18 Mar 2014 18:51:54 +0000 (18:51 +0000)]
Fix minor inaccuracy in the release manager's guide
Aaron Crane [Tue, 18 Mar 2014 18:50:38 +0000 (18:50 +0000)]
Upgrade Digest-SHA from 5.87 to 5.88
[DELTA]
- added OUTPUT clause in SHA.xs to silence compiler warning
-- ref. shaclose()
- changed text file test (-T) to act on filehandles
-- ref. addfile portable mode
-- improves consistency when reading from STDIN
-- still acts on filenames for early Perls (< 5.6)
- added -M and -V options to shasum
-- undocumented: for development and testing use only
Karl Williamson [Tue, 18 Mar 2014 18:45:49 +0000 (12:45 -0600)]
Porting/todo.pod: Use F<> instead of C<>
A file path is supposed to be enclosed in F<>
Karl Williamson [Tue, 18 Mar 2014 18:17:16 +0000 (12:17 -0600)]
mktables: In-line defns for tables up to 3 ranges
eb0925341cc65ce6ce57503ec0ab97cdad39dc98 caused the definitions for
about 45% of the Unicode tables to be placed in-line in Heavy.pl instead
of them having to be read-in from disk. This new commit extends that so
that about 55% are in-lined, by in-lining tables which consist of up to
3 ranges.
This is a no-brainer to do, as the memory usage does not increase by
doing it, and disk accesses go down. I used the delta in the disk size
of Heavy.pl as a proxy for the delta in the memory size that it uses,
as what this commit does is to change various scalar strings in it.
Doing this measurement indicates that this commit results in a slightly
smaller Heavy.pl than what was there before
eb092534. The amounts will
vary between Unicode releases. I also checked for Unicode beta 7.0, and
the sizes are again comparable, with a slightly larger Heavy.pl for the
3-range version there.
For 4-, 5-, ... range tables, doing this results in slowly increasing
Heavy.pl size (and hence more and more memory use), and that is
something we may wish to look at in the future, trading memory for fewer
files and less disk start-up cost. But for the imminent v5.20, doing it
for 3-range tables doesn't cost us anything, and gains us fewer disk
files and accesses.
Karl Williamson [Tue, 18 Mar 2014 18:10:46 +0000 (12:10 -0600)]
mktables: Remove obsolete sort constraint
Zero-length tables are no longer expressed in terms of the Perl 'All'
property, so the sort no longer has to make sure the latter is processed
before the former.
Karl Williamson [Tue, 18 Mar 2014 18:09:25 +0000 (12:09 -0600)]
mktables: Add comments, reorder a gen'd file
This adds some clarifying comments, and reorders Heavy.pl so the array
referred to by two hashes occurs before both hashes in the output.
Karl Williamson [Tue, 18 Mar 2014 18:07:55 +0000 (12:07 -0600)]
mktables: White-space only
This indents code to conform to the new block created in the previous
commit
Karl Williamson [Tue, 18 Mar 2014 17:43:59 +0000 (11:43 -0600)]
utf8_heavy.pl: Change data structure for in-lined definitions
This commit puts the in-lined definitions introduced by
eb0925341cc65ce6ce57503ec0ab97cdad39dc98 into a separate array,
where each element is a unique definition. This can result in slightly
smaller current memory usage in utf8_heavy.pl, as the strings giving the
file names now only appear once, and what replaces them in the hash
values are strings of digits indices, which are shorter.
But doing this allows us in a later commit to increase the number of
ranges in the tables that get in-lined, without increasing memory usage.
This commit also changes the code that generates the definitions to be
more general, so that it becomes trivial to change things to generate
in-line definitions for tables with more than one range.
Karl Williamson [Tue, 18 Mar 2014 16:39:53 +0000 (10:39 -0600)]
mktables: Fix overlooked in-line table defns code
Commit
eb0925341cc65ce6ce57503ec0ab97cdad39dc98 introduced the idea of a
pseudo-directory as a way to store table definitions in-line in
Heavy.pl, but conform to the expectations of the code in regard to
objects being files within directories. This kept the needed changes to
a minimum. The code changed by the current commit was overlooked then
as something that also needed to change, because there are no current
instances of it needing to. But this could change with future Unicode
versions, or as in the next few commits, in extending the in-line
definitions.
Matthew Horsfall (via RT) [Thu, 13 Mar 2014 12:39:48 +0000 (05:39 -0700)]
Add support for test.valgrind parallel testing
# New Ticket Created by Matthew Horsfall
# Please include the string: [perl #121431]
# in the subject line of all future correspondence about this issue.
# <URL: https://rt.perl.org/Ticket/Display.html?id=121431 >
This is a bug report for perl from wolfsage@gmail.com,
generated with the help of perlbug 1.39 running under perl 5.14.2.
-----------------------------------------------------------------
[Please describe your issue here]
The included patch allows test.valgrind to run tests in parallel.
Valgrind output for each test will be printed out after the test
completes, with the name of the test prefixing every line.
Example usage might be:
TEST_JOBS=8 make test.valgrind VALGRIND='valgrind -q' 2>&1 | tee out.txt
-q is needed to ensure only *errors* are captured, otherwise the output will
be much louder than it already is. (Perhaps this should be the default mode?)
[Please do not change anything below this line]
-----------------------------------------------------------------
Ricardo Signes [Tue, 18 Mar 2014 17:29:54 +0000 (13:29 -0400)]
Merge perllexwarn.pod into warnings.pm
Ricardo Signes [Tue, 18 Mar 2014 17:29:42 +0000 (13:29 -0400)]
regenerate warnings.pm
Ricardo Signes [Tue, 18 Mar 2014 17:24:50 +0000 (13:24 -0400)]
do not podcheck regen/warnings.pl
Ricardo Signes [Tue, 18 Mar 2014 17:16:08 +0000 (13:16 -0400)]
warnings.pm: improve awkward sentence in pod
Ricardo Signes [Fri, 14 Mar 2014 08:28:38 +0000 (09:28 +0100)]
bump the version of warnings.pm
(and of regen/warnings.pl)
Ricardo Signes [Fri, 14 Mar 2014 08:15:36 +0000 (09:15 +0100)]
replace links to perllexwarn with links to warnings
or, sometimes, simply remove them
Ricardo Signes [Fri, 14 Mar 2014 08:11:28 +0000 (09:11 +0100)]
remove references to perllexwarn from warnings.pm
Ricardo Signes [Fri, 14 Mar 2014 08:09:29 +0000 (09:09 +0100)]
regen/warnings.pl no longer touches perllexwarn
Ricardo Signes [Fri, 14 Mar 2014 08:09:09 +0000 (09:09 +0100)]
turn perllexwarn into a stub
Ricardo Signes [Fri, 14 Mar 2014 08:04:09 +0000 (09:04 +0100)]
merge most of perllexwarn into warnings
Ricardo Signes [Fri, 14 Mar 2014 07:51:31 +0000 (08:51 +0100)]
replace printTree with warningsTree
we return, rather than print, the warnings, so we can potentially
futz around with the string and put it where we like without
having to worry about C<select>
Ricardo Signes [Fri, 14 Mar 2014 07:45:06 +0000 (08:45 +0100)]
enclose warnings.h generation in a block
...to limit the number of variables visible everywhere and
make it a bit easier to see what I am doing as I refactor
regen/warnings.pl
Aaron Crane [Tue, 18 Mar 2014 17:17:54 +0000 (17:17 +0000)]
Fix uninitialized-value warnings in Thread::Queue
This involves a version bump, to 3.05.
Andy Dougherty [Thu, 13 Mar 2014 20:16:22 +0000 (16:16 -0400)]
Make sure the PWD environment variable points to the t directory.
runtests is typically run under /bin/sh. If the user uses a different
interactive shell (such as /bin/ksh) that maintains the PWD environment
variable, but /bin/sh does not, then the 'cd t' line in runtests ends
up changing the working directory without updating $PWD. Several tests
in t/io/fs.t rely on being able to change directories and then get back
to the original. The tests assume that if $PWD is set at all, then
it is set correctly. This fix changes runtests to ensure it is so.
Andy Dougherty [Thu, 13 Mar 2014 19:44:19 +0000 (15:44 -0400)]
Split file into parts with and without substitutions.
At this point, there are no functional changes. This just prepares
the way for future work.
Yves Orton [Sat, 1 Mar 2014 16:31:53 +0000 (17:31 +0100)]
Preallocate HvAUX() structures for large bucket arrays
The assumption is that the time/space tradeoff of not allocating
the HvAUX() structure goes away for a large bucket array where the
size of the allocated buffer is much larger than the nonallocated
HvAUX() "extension".
This should make keys() and each() on larger hashes faster, but
still preserve the essence of the original space conservation,
where the assumption is a lot of small hash based objects which
will never be traversed.
Yves Orton [Sat, 1 Mar 2014 14:49:28 +0000 (15:49 +0100)]
Split out part of hv_auxinit() so it can be reused
Changes nothing except that it introduces hv_auxinit_interal() which
does part of the job of hv_auxinit(), so that we can call it from
somewhere else in the next commit.
David Mitchell [Mon, 17 Mar 2014 16:44:48 +0000 (16:44 +0000)]
perlfunc: clarify kill()'s return value
David Mitchell [Mon, 17 Mar 2014 16:19:10 +0000 (16:19 +0000)]
tidy up kill0.t and kill0_child
The previous commit added some tests to kill0.t, and added the auxiliary
file kill0_child. Tidy up the new code to better match normal standards.
In particular, improve the format, grammar and clarity of the comments,
and replace q|...| with "..." where appropriate.
Also, make the temporary filename a variable, and prefix it with "tmp-",
so that if gets left around for any reason, it's more obvious that it's
just an extraneous temporary file.
(I haven't actually tested this commit on win32)
Daniel Dragan [Mon, 17 Mar 2014 15:29:52 +0000 (15:29 +0000)]
RT #121230, tests for process group kill on Win32
Add tests for
111f73b5d79, the fix for kill -SIG on win32, which was
broken in 5.18.0
(A follow-up commit will clean this code up a bit)
David Mitchell [Sun, 16 Mar 2014 18:51:07 +0000 (18:51 +0000)]
[MERGE] avoid calling pp_null().
Several 'empty' ops like OP_NULL and OP_SCOPE call pp_null() at run-time
(which just returns). Attempts are made to strip such empty ops from the
op_next execution chain, but this has not been not complete. In
particular, ops at the head or tail of a sub-chain, or ops that rpeep()
has itself nulled, weren't being eliminated.
This merge avoids all calls to pp_null() in the test suite, apart from
those called via the constant folder (which is called before null op
elimination), and OP_REGCMAYBE (which isn't addressed here).
David Mitchell [Wed, 5 Mar 2014 16:08:02 +0000 (16:08 +0000)]
elide "empty" ops at the head of op_next chains
Currently all OP_NULL/OP_SCOPE/OP_SCALAR/OP_LINESEQ ops (which all map at
run time to pp_null()) are eliminated from op_next chains *except* ones at
the head of a chain (e.g. pointed to by o->op_other).
The API of peep()/rpeep() makes it difficult to directly do this within
the function itself, as it has no return value - and thus
RPEEP(o->op_other) has no way to update op_other to skip the first op if
it happens to be a null or whatever.
Instead, we add a small helper function, S_prune_chain_head(), and
always call it after we call peep, e.g.
CALL_PEEP(PL_main_start);
finalize_optree(PL_main_root);
+S_prune_chain_head(aTHX_ &PL_main_start);
rpeep() is also complicated by its recursion reduction mechanism, where
it saves the addresses of several ops before recursing on them. I had to
change this so that it saves the addresses of the addresses of the ops
instead, so they can be updated: i.e. rather than saving o->op_other,
it saves &(o->op_other).
With this commit, nothing in the test suite triggers executing pp_null(),
execpt OP_REGCMAYBE and S_fold_constants(). I verified this with the
following hacky diff:
>>>>diff --git a/op.c b/op.c
>>>>index 716c684..819a717 100644
>>>>--- a/op.c
>>>>+++ b/op.c
>>>>@@ -3489,6 +3489,7 @@ S_op_integerize(pTHX_ OP *o)
>>>> return o;
>>>> }
>>>>
>>>>+int XXX_folding = 0;
>>>> static OP *
>>>> S_fold_constants(pTHX_ OP *o)
>>>> {
>>>>@@ -3504,6 +3505,7 @@ S_fold_constants(pTHX_ OP *o)
>>>> SV * const olddiehook = PL_diehook;
>>>> COP not_compiling;
>>>> dJMPENV;
>>>>+ int XXX_folding_old = XXX_folding;
>>>>
>>>> PERL_ARGS_ASSERT_FOLD_CONSTANTS;
>>>>
>>>>@@ -3583,11 +3585,13 @@ S_fold_constants(pTHX_ OP *o)
>>>> assert(IN_PERL_RUNTIME);
>>>> PL_warnhook = PERL_WARNHOOK_FATAL;
>>>> PL_diehook = NULL;
>>>>+ XXX_folding = 1;
>>>> JMPENV_PUSH(ret);
>>>>
>>>> switch (ret) {
>>>> case 0:
>>>> CALLRUNOPS(aTHX);
>>>>+ XXX_folding = XXX_folding_old;
>>>> sv = *(PL_stack_sp--);
>>>> if (o->op_targ && sv == PAD_SV(o->op_targ)) { /* grab pad temp? */
>>>> #ifdef PERL_MAD
>>>>@@ -3608,10 +3612,12 @@ S_fold_constants(pTHX_ OP *o)
>>>> case 3:
>>>> /* Something tried to die. Abandon constant folding. */
>>>> /* Pretend the error never happened. */
>>>>+ XXX_folding = XXX_folding_old;
>>>> CLEAR_ERRSV();
>>>> o->op_next = old_next;
>>>> break;
>>>> default:
>>>>+ XXX_folding = XXX_folding_old;
>>>> JMPENV_POP;
>>>> /* Don't expect 1 (setjmp failed) or 2 (something called my_exit) */
>>>> PL_warnhook = oldwarnhook;
>>>>diff --git a/pp_hot.c b/pp_hot.c
>>>>index 36eac2b..ccb582f 100644
>>>>--- a/pp_hot.c
>>>>+++ b/pp_hot.c
>>>>@@ -68,9 +68,16 @@ PP(pp_gvsv)
>>>> RETURN;
>>>> }
>>>>
>>>>+extern int XXX_folding;
>>>> PP(pp_null)
>>>> {
>>>> dVAR;
>>>>+ if (!XXX_folding && PL_op->op_type != OP_REGCMAYBE) {
>>>>+ sv_dump((SV*)find_runcv(0));
>>>>+ op_dump(PL_op);
>>>>+ op_dump((OP*)PL_curcop);
>>>>+ assert(0);
>>>>+ }
>>>> return NORMAL;
>>>> }
>>>>
David Mitchell [Wed, 5 Mar 2014 19:42:36 +0000 (19:42 +0000)]
rpeep(): elide just-nulled ops
Perl_rpeep() currently spots "empty" ops like OP_NULL, OP_SCOPE
and elides them from the op_next chain (by setting oldop->op_next to point
to the op following the current op). However, if rpeep() itself
op_null()'s the current op, then when the main loop is re-entered, that
mechanism is bypassed. Modify re-entry to the loop in this case so that
the just nulled op re-processed and thus elided.
(Also document what the OP_SASSIGN/OP_SUBSTR optimisation is doing;
studying that was what originally led me to this general fix.)
David Mitchell [Wed, 5 Mar 2014 19:42:02 +0000 (19:42 +0000)]
rpeep(): remove trailing OP_NULLs etc
Perl_rpeep() elides OP_NULLs etc in the middle of an op_next chain, but
not at the start or end. Doing it at the start is hard (and not addressed
here); doing it at the end is trivial, and it just looks like a mistake in
the original code (there since 1994) that was (incorrectly) worried about
following through a null pointer.
David Mitchell [Thu, 6 Mar 2014 13:32:56 +0000 (13:32 +0000)]
code following eval {} not always optimised
In something like this
eval { 1 while 1 };
$x = $a[0];
The optimising of the while loop makes Perl_rpeep() miss processing the
chain of ops from the OP_LEAVETRY onwards. So in the code above for
example, the alem wont be optimised into an alemfast.
Fix this by explicitly recursing into the entertry->op_other branch
(which actually points at the leavetry).
The infinite loop above can be broken by, for example, a signal handler
calling die.
David Mitchell [Wed, 5 Mar 2014 14:44:41 +0000 (14:44 +0000)]
OP_SORT: store start of block in null->op_next
When a sort with a code block, like sort { BLOCK } arg, ...
is compiled, it comes out like
sort
pushmark
null
scope
BLOCK
arg
...
(The 'scope' may be instead be 'ex-leave' depending on circumstances).
At run time, pp_sort() navigates its way down from the sort op to find the
start op of the BLOCK. We can shorten this process slightly by storing the
start of BLOCK in the otherwise unused op_next field of the OP_NULL.
Effectively we are using the null->op_next field as a surrogate op_other
field for the op_sort (which doesn't have a spare field we could store
the pointer in).
The main point of this commit however is not the slight speed up from
skipping a couple of pointer follows at run-time; rather that it will
shortly allow us to trim any null ops from the beginning of the BLOCK. We
can't do this directly, as that would involve changing the scope->op_first
pointer, which might confuse B:: type modules.
David Mitchell [Wed, 5 Mar 2014 14:19:33 +0000 (14:19 +0000)]
rpeep(): OP_SORT with code block has OPf_SPECIAL
In rpeep(), we check whether the OP_SORT has a code block as the first arg
(e.g. sort {BLOCK} ...) by testing for OPf_STACKED, then looking for
an OP_SCOPE or ex-OP_LEAVE. However, ck_sort() has already checked for
this situation and set the OPf_SPECIAL flag. So just just check for this
flag in rpeep(); leave in the OP_SCOPE/ex-OP_LEAVE checks as just
assertions.
Also, add some commentary to ck_sort() and S_simplify_sort().