Michael Guralnik [Thu, 8 Dec 2022 04:23:46 +0000 (06:23 +0200)]
net/mlx5: Expose steering dropped packets counter
Add rx steering discarded packets counter to the vnic_diag debugfs.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Or Har-Toov [Tue, 22 Nov 2022 10:42:18 +0000 (12:42 +0200)]
net/mlx5: Refactor and expand rep vport stat group
Expand representor vport stat group to support all counters from the
vport stat group, to count all the traffic passing through the vport.
Fix current implementation where fill_stats and update_stats use
different structs.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Sun, 9 Oct 2022 06:53:22 +0000 (09:53 +0300)]
net/mlx5e: multipath, support routes with more than 2 nexthops
Today multipath offload is only supported when the number of
nexthops is 2 which block the use of it in case of system with
2 NICs.
This patch solve it by enabling multipath offload per NIC if
2 nexthops of the route are its uplinks.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Oz Shlomo [Wed, 2 Nov 2022 14:36:51 +0000 (14:36 +0000)]
net/mlx5e: TC, add support for meter mtu offload
Initialize the meter object with the TC police mtu parameter.
Use the hardware range destination to compare the pkt len to the mtu setting.
Assign the range destination hit/miss ft to the police conform/exceed
attributes.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Oz Shlomo [Wed, 24 Aug 2022 12:45:43 +0000 (12:45 +0000)]
net/mlx5e: meter, add mtu post meter tables
TC police action may configure the maximum packet size to be handled by
the policer, in addition to byte/packet rate.
MTU check is realized in hardware using the range destination, specifying
a hit ft, if packet len is in the range, or miss ft otherwise.
Instantiate mtu green/red flow tables with a single match-all rule.
Add the green/red actions to the hit/miss table accordingly.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Oz Shlomo [Thu, 1 Dec 2022 12:35:36 +0000 (12:35 +0000)]
net/mlx5e: meter, refactor to allow multiple post meter tables
TC police action may configure the maximum packet size to be handled by
the policer, in addition to byte/packet rate.
Currently the post meter table steers the packet according to the meter
aso output.
Refactor the code to allow both metering and range post actions as a
pre-step for adding police mtu offload support.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 29 Nov 2022 09:21:38 +0000 (11:21 +0200)]
net/mlx5: DR, Add support for range match action
Add support for matching on range.
The supported type of range is L2 frame size.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 29 Nov 2022 09:01:23 +0000 (11:01 +0200)]
net/mlx5: DR, Add function that tells if STE miss addr has been initialized
Up until now miss address in all the STEs was used to connect miss lists
and to link the last STE in the list to end anchor.
Match range STE will require special handling because its miss address is
part of the 'action'. That is, range action has hit and miss addresses.
Since the range action is always the last action, need to make sure that
its miss address isn't overwritten by the end anchor.
Adding new function mlx5dr_ste_is_miss_addr_set() to answer the question
whether the STE's miss address has already been set as part of STE
initialization. Use a callback that always returns false right now. Once
match range is added, a different callback will be used for that STE type.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 29 Nov 2022 22:26:05 +0000 (00:26 +0200)]
net/mlx5: DR, Some refactoring of miss address handling
In preparation for MATCH RANGE STE support, create a function
to set the miss address of an STE.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 25 Aug 2022 12:35:59 +0000 (15:35 +0300)]
net/mlx5: DR, Manage definers with refcounts
In many cases different actions will ask for the same definer format.
Instead of allocating new definer general object and running out of
definers, have an xarray of allocated definers and keep track of their
usage with refcounts: allocate a new definer only when there isn't
one with the same format already created, and destroy definer only
when its refcount runs down to zero.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Fri, 5 Aug 2022 23:36:54 +0000 (02:36 +0300)]
net/mlx5: DR, Handle FT action in a separate function
As preparation for range action support, moving the handling
of final ICM address for flow table action to a separate function.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Fri, 5 Aug 2022 10:42:24 +0000 (13:42 +0300)]
net/mlx5: DR, Rework is_fw_table function
This patch handles the following two changes w.r.t. is_fw_table function:
1. When SW steering is asked to create/destroy FW table, we allow for
creation/destruction of only termination tables. Rename mlx5_dr_is_fw_table
both to comply with the static function naming and to reflect that we're
actually checking for FW termination table.
2. When the action 'go to flow table' is created, the destination flow
table can be any FW table, not only termination table. Adding function
to check if the dest table is FW table. This function will also be used
by the later creation of range match action, so putting it the header file.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 31 May 2022 13:25:17 +0000 (16:25 +0300)]
net/mlx5: DR, Add functions to create/destroy MATCH_DEFINER general object
SW steering is able to match only on the exact values of the packet fields,
as requested by the user: the user provides mask for the fields that are of
interest, and the exact values to be matched on when the traffic is handled.
Match Definer is a general FW object that defines which fields in the
packet will be referenced by the mask and tag of each STE. Match definer ID
is part of STE fields, and it defines how the HW needs to interpret the STE's
mask/tag values.
Till now SW steering used the definers that were managed by FW and implemented
the STE layout as described by the HW spec. Now that we're adding a new type
of STE, SW steering needs to define for the HW how it should interpret this
new STE's layout.
This is done with a programmable match definer.
The programmable definer allows to selects which fields will be included in
the definer, and their layout: it has up to 9 DW selectors 8 Byte selectors.
Each selector indicates a DW/Byte worth of fields out of the table that
is defined by HW spec by referencing the offset of the required DW/Byte.
This patch adds dr_cmd function to create and destroy MATCH_DEFINER
general object.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Mon, 15 Aug 2022 09:45:28 +0000 (12:45 +0300)]
net/mlx5: fs, add match on ranges API
Range is a new flow destination type which allows matching on
a range of values instead of matching on a specific value.
Range flow destination has the following fields:
- hit_ft: flow table to forward the traffic in case of hit
- miss_ft: flow table to forward the traffic in case of miss
- field: which packet characteristic to match on
- min: minimal value for the selected field
- max: maximal value for the selected field
Note:
- In order to match, the value in the packet should meet
the following criteria: min <= value < max
- Currently, the only supported field type is L2 packet length
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 31 May 2022 10:55:28 +0000 (13:55 +0300)]
net/mlx5: mlx5_ifc updates for MATCH_DEFINER general object
Update full structure of match definer and add an ID of
the SELECT match definer type.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jakub Kicinski [Thu, 8 Dec 2022 22:27:50 +0000 (14:27 -0800)]
Merge branch 'mlx4-better-big-tcp-support'
Eric Dumazet says:
====================
mlx4: better BIG-TCP support
mlx4 uses a bounce buffer in TX whenever the tx descriptors
wrap around the right edge of the ring.
Size of this bounce buffer was hard coded and can be
increased if/when needed.
====================
Link: https://lore.kernel.org/r/20221207141237.2575012-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 7 Dec 2022 14:12:37 +0000 (14:12 +0000)]
net/mlx4: small optimization in mlx4_en_xmit()
Test against MLX4_MAX_DESC_TXBBS only matters if the TX
bounce buffer is going to be used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 7 Dec 2022 14:12:36 +0000 (14:12 +0000)]
net/mlx4: MLX4_TX_BOUNCE_BUFFER_SIZE depends on MAX_SKB_FRAGS
Google production kernel has increased MAX_SKB_FRAGS to 45
for BIG-TCP rollout.
Unfortunately mlx4 TX bounce buffer is not big enough whenever
an skb has up to 45 page fragments.
This can happen often with TCP TX zero copy, as one frag usually
holds 4096 bytes of payload (order-0 page).
Tested:
Kernel built with MAX_SKB_FRAGS=45
ip link set dev eth0 gso_max_size 185000
netperf -t TCP_SENDFILE
I made sure that "ethtool -G eth0 tx 64" was properly working,
ring->full_size being set to 15.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Wei Wang <weiwan@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 7 Dec 2022 14:12:35 +0000 (14:12 +0000)]
net/mlx4: rename two constants
MAX_DESC_SIZE is really the size of the bounce buffer used
when reaching the right side of TX ring buffer.
MAX_DESC_TXBBS get a MLX4_ prefix.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 8 Dec 2022 21:04:57 +0000 (13:04 -0800)]
Merge branch 'mlx5-Support-tc-police-jump-conform-exceed-attribute'
Saeed Mahameed says:
====================
Support tc police jump conform-exceed attribute
The tc police action conform-exceed option defines how to handle
packets which exceed or conform to the configured bandwidth limit.
One of the possible conform-exceed values is jump, which skips over
a specified number of actions.
This series adds support for conform-exceed jump action.
The series adds platform support for branching actions by providing
true/false flow attributes to the branching action.
This is necessary for supporting police jump, as each branch may
execute a different action list.
The first five patches are preparation patches:
- Patches 1 and 2 add support for actions with no destinations (e.g. drop)
- Patch 3 refactor the code for subsequent function reuse
- Patch 4 defines an abstract way for identifying terminating actions
- Patch 5 updates action list validations logic considering branching actions
The following three patches introduce an interface for abstracting branching
actions:
- Patch 6 introduces an abstract api for defining branching actions
- Patch 7 generically instantiates the branching flow attributes using
the abstract API
Patch 8 adds the platform support for jump actions, by executing the following
sequence:
a. Store the jumping flow attr
b. Identify the jump target action while iterating the actions list.
c. Instantiate a new flow attribute after the jump target action.
This is the flow attribute that the branching action should jump to.
d. Set the target post action id on:
d.1. The jumping attribute, thus realizing the jump functionality.
d.2. The attribute preceding the target jump attr, if not terminating.
The next patches apply the platform's branching attributes to the police
action:
- Patch 9 is a refactor patch
- Patch 10 initializes the post meter table with the red/green flow attributes,
as were initialized by the platform
- Patch 11 enables the offload of meter actions using jump conform-exceed
value.
====================
Link: https://lore.kernel.org/all/20221203221337.29267-1-saeed@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:33 +0000 (14:13 -0800)]
net/mlx5e: TC, allow meter jump control action
Separate the matchall police action validation from flower validation.
Isolate the action validation logic in the police action parser.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:32 +0000 (14:13 -0800)]
net/mlx5e: TC, init post meter rules with branching attributes
Instantiate the post meter actions with the platform initialized branching
action attributes.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:31 +0000 (14:13 -0800)]
net/mlx5e: TC, rename post_meter actions
Currently post meter supports only the pipe/drop conform-exceed policy.
This assumption is reflected in several variable names.
Rename the following variables as a pre-step for using the generalized
branching action platform.
Rename fwd_green_rule/drop_red_rule to green_rule/red_rule respectively.
Repurpose red_counter/green_counter to act_counter/drop_counter to allow
police conform-exceed configurations that do not drop.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:30 +0000 (14:13 -0800)]
net/mlx5e: TC, initialize branching action with target attr
Identify the jump target action when iterating the action list.
Initialize the jump target attr with the jumping attribute during the
parsing phase. Initialize the jumping attr post action with the target
during the offload phase.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:29 +0000 (14:13 -0800)]
net/mlx5e: TC, initialize branch flow attributes
Initialize flow attribute for drop, accept, pipe and jump branching actions.
Instantiate a flow attribute instance according to the specified branch
control action. Store the branching attributes on the branching action
flow attribute during the parsing phase. Then, during the offload phase,
allocate the relevant mod header objects to the branching actions.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:28 +0000 (14:13 -0800)]
net/mlx5e: TC, set control params for branching actions
Extend the act tc api to set the branch control params aligning with
the police conform/exceed use case.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:27 +0000 (14:13 -0800)]
net/mlx5e: TC, validate action list per attribute
Currently the entire flow action list is validate for offload limitations.
For example, flow with both forward and drop actions are declared invalid
due to hardware restrictions.
However, a multi-table hardware model changes the limitations from a flow
scope to a single flow attribute scope.
Apply offload limitations to flow attributes instead of the entire flow.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-6-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:26 +0000 (14:13 -0800)]
net/mlx5e: TC, add terminating actions
Extend act api to identify actions that terminate action list.
Pre-step for terminating branching actions.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:25 +0000 (14:13 -0800)]
net/mlx5e: TC, reuse flow attribute post parser processing
After the tc action parsing phase the flow attribute is initialized with
relevant eswitch offload objects such as tunnel, vlan, header modify and
counter attributes. The post processing is done both for fdb and post-action
attributes.
Reuse the flow attribute post parsing logic by both fdb and post-action
offloads.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-4-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:24 +0000 (14:13 -0800)]
net/mlx5: fs, assert null dest pointer when dest_num is 0
Currently create_flow_handle() assumes a null dest pointer when there
are no destinations.
This might not be the case as the caller may pass an allocated dest
array while setting the dest_num parameter to 0.
Assert null dest array for flow rules that have no destinations (e.g. drop
rule).
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oz Shlomo [Sat, 3 Dec 2022 22:13:23 +0000 (14:13 -0800)]
net/mlx5e: E-Switch, handle flow attribute with no destinations
Rules with drop action are not required to have a destination.
Currently the destination list is allocated with the maximum number of
destinations and passed to the fs_core layer along with the actual number
of destinations.
Remove redundant passing of dest pointer when count of dest is 0.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Mon, 5 Dec 2022 05:29:04 +0000 (06:29 +0100)]
net: dsa: microchip: add stats64 support for ksz8 series of switches
Add stats64 support for ksz8xxx series of switches.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20221205052904.2834962-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 8 Dec 2022 04:17:35 +0000 (20:17 -0800)]
Merge branch 'net-ethernet-ti-am65-cpsw-fix-set-channel-operation'
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: Fix set channel operation
This contains a critical bug fix for the recently merged suspend/resume
support [1] that broke set channel operation. (ethtool -L eth0 tx <n>)
As there were 2 dependent patches on top of the offending commit [1]
first revert them and then apply them back after the correct fix.
[1]
fd23df72f2be ("net: ethernet: ti: am65-cpsw: Add suspend/resume support")
====================
Link: https://lore.kernel.org/r/20221206094419.19478-1-rogerq@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roger Quadros [Tue, 6 Dec 2022 09:44:19 +0000 (11:44 +0200)]
net: ethernet: ti: am65-cpsw: Fix hardware switch mode on suspend/resume
On low power during system suspend the ALE table context is lost.
Save the ALE context before suspend and restore it after resume.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roger Quadros [Tue, 6 Dec 2022 09:44:18 +0000 (11:44 +0200)]
net: ethernet: ti: am65-cpsw: retain PORT_VLAN_REG after suspend/resume
During suspend resume the context of PORT_VLAN_REG is lost so
save it during suspend and restore it during resume for
host port and slave ports.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roger Quadros [Tue, 6 Dec 2022 09:44:17 +0000 (11:44 +0200)]
net: ethernet: ti: am65-cpsw: Add suspend/resume support
Add PM handlers for System suspend/resume.
As DMA driver doesn't yet support suspend/resume we free up
the DMA channels at suspend and acquire and initialize them
at resume.
In this revised approach we do not free the TX/RX IRQs at
am65_cpsw_nuss_common_stop() as it causes problems.
We will now free them only on .suspend() as we need to release
the DMA channels (as DMA looses context) and re-acquiring
them on .resume() may not necessarily give us the same
IRQs.
To make this easier:
- introduce am65_cpsw_nuss_remove_rx_chns() which is
similar to am65_cpsw_nuss_remove_tx_chns(). These will
be invoked in pm.suspend() to release the DMA channels
and free up the IRQs.
- move napi_add() and request_irq() calls to
am65_cpsw_nuss_init_rx/tx_chns() so we can invoke them
in pm.resume() to acquire the DMA channels and IRQs.
As CPTS looses contect during suspend/resume, invoke the
necessary CPTS suspend/resume helpers.
ALE_CLEAR command is issued in cpsw_ale_start() so no need
to issue it before the call to cpsw_ale_start().
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roger Quadros [Tue, 6 Dec 2022 09:44:16 +0000 (11:44 +0200)]
Revert "net: ethernet: ti: am65-cpsw: Add suspend/resume support"
This reverts commit
fd23df72f2be317d38d9fde0a8996b8e7454fd2a.
This commit broke set channel operation. Revert this and
implement it with a different approach in a separate patch.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roger Quadros [Tue, 6 Dec 2022 09:44:15 +0000 (11:44 +0200)]
Revert "net: ethernet: ti: am65-cpsw: retain PORT_VLAN_REG after suspend/resume"
This reverts commit
643cf0e3ab5ccee37b3c53c018bd476c45c4b70e.
This is to make it easier to revert the offending commit
fd23df72f2be ("net: ethernet: ti: am65-cpsw: Add suspend/resume support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roger Quadros [Tue, 6 Dec 2022 09:44:14 +0000 (11:44 +0200)]
Revert "net: ethernet: ti: am65-cpsw: Fix hardware switch mode on suspend/resume"
This reverts commit
1af3cb3702d02167926a2bd18580cecb2d64fd94.
This is to make it easier to revert the offending commit
fd23df72f2be ("net: ethernet: ti: am65-cpsw: Add suspend/resume support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 8 Dec 2022 04:09:21 +0000 (20:09 -0800)]
Merge branch 'devlink-add-port-function-attribute-to-enable-disable-roce-and-migratable'
Shay Drory says:
====================
devlink: Add port function attribute to enable/disable Roce and migratable
This series is a complete rewrite of the series "devlink: Add port
function attribute to enable/disable roce"
link:
https://lore.kernel.org/netdev/
20221102163954.279266-1-danielj@nvidia.com/
Currently mlx5 PCI VF and SF are enabled by default for RoCE
functionality. And mlx5 PCI VF is disable by dafault for migratable
functionality.
Currently a user does not have the ability to disable RoCE for a PCI
VF/SF device before such device is enumerated by the driver.
User is also incapable to do such setting from smartnic scenario for a
VF from the smartnic.
Current 'enable_roce' device knob is limited to do setting only at
driverinit time. By this time device is already created and firmware has
already allocated necessary system memory for supporting RoCE.
Also, Currently a user does not have the ability to enable migratable
for a PCI VF.
The above are a hyper visor level control, to set the functionality of
devices passed through to guests.
This is achieved by extending existing 'port function' object to control
capabilities of a function. This enables users to control capability of
the device before enumeration.
Examples when user prefers to disable RoCE for a VF when using switchdev
mode:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev pf0vf0 flavour pcivf controller 0
pfnum 0 vfnum 0 external false splittable false
function:
hw_addr 00:00:00:00:00:00 roce enable
$ devlink port function set pci/0000:06:00.0/1 roce disable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev pf0vf0 flavour pcivf controller 0
pfnum 0 vfnum 0 external false splittable false
function:
hw_addr 00:00:00:00:00:00 roce disable
FAQs:
-----
1. What does roce enable/disable do?
Ans: It disables RoCE capability of the function before its enumerated,
so when driver reads the capability from the device firmware, it is
disabled.
At this point RDMA stack will not be able to create UD, QP1, RC, XRC
type of QPs. When RoCE is disabled, the GID table of all ports of the
device is disabled in the device and software stack.
2. How is the roce 'port function' option different from existing
devlink param?
Ans: RoCE attribute at the port function level disables the RoCE
capability at the specific function level; while enable_roce only does
at the software level.
3. Why is this option for disabling only RoCE and not the whole RDMA
device?
Ans: Because user still wants to use the RDMA device for non RoCE
commands in more memory efficient way.
====================
Link: https://lore.kernel.org/r/20221206185119.380138-1-shayd@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Drory [Tue, 6 Dec 2022 18:51:19 +0000 (20:51 +0200)]
net/mlx5: E-Switch, Implement devlink port function cmds to control migratable
Implement devlink port function commands to enable / disable migratable.
This is used to control the migratable capability of the device.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Drory [Tue, 6 Dec 2022 18:51:18 +0000 (20:51 +0200)]
devlink: Expose port function commands to control migratable
Expose port function commands to enable / disable migratable
capability, this is used to set the port function as migratable.
Live migration is the process of transferring a live virtual machine
from one physical host to another without disrupting its normal
operation.
In order for a VM to be able to perform LM, all the VM components must
be able to perform migration. e.g.: to be migratable.
In order for VF to be migratable, VF must be bound to VFIO driver with
migration support.
When migratable capability is enabled for a function of the port, the
device is making the necessary preparations for the function to be
migratable, which might include disabling features which cannot be
migrated.
Example of LM with migratable function configuration:
Set migratable of the VF's port function.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 migratable disable
$ devlink port function set pci/0000:06:00.0/2 migratable enable
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 migratable enable
Bind VF to VFIO driver with migration support:
$ echo <pci_id> > /sys/bus/pci/devices/0000:08:00.0/driver/unbind
$ echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:08:00.0/driver_override
$ echo <pci_id> > /sys/bus/pci/devices/0000:08:00.0/driver/bind
Attach VF to the VM.
Start the VM.
Perform LM.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yishai Hadas [Tue, 6 Dec 2022 18:51:17 +0000 (20:51 +0200)]
net/mlx5: E-Switch, Implement devlink port function cmds to control RoCE
Implement devlink port function commands to enable / disable RoCE.
This is used to control the RoCE device capabilities.
This patch implement infrastructure which will be used by downstream
patches that will add additional capabilities.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Drory [Tue, 6 Dec 2022 18:51:16 +0000 (20:51 +0200)]
net/mlx5: Add generic getters for other functions caps
Downstream patch requires to get other function GENERAL2 caps while
mlx5_vport_get_other_func_cap() gets only one type of caps (general).
Rename it to represent this and introduce a generic implementation
of mlx5_vport_get_other_func_cap().
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Drory [Tue, 6 Dec 2022 18:51:15 +0000 (20:51 +0200)]
devlink: Expose port function commands to control RoCE
Expose port function commands to enable / disable RoCE, this is used to
control the port RoCE device capabilities.
When RoCE is disabled for a function of the port, function cannot create
any RoCE specific resources (e.g GID table).
It also saves system memory utilization. For example disabling RoCE enable a
VF/SF saves 1 Mbytes of system memory per function.
Example of a PCI VF port which supports function configuration:
Set RoCE of the VF's port function.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 roce enable
$ devlink port function set pci/0000:06:00.0/2 roce disable
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 roce disable
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Drory [Tue, 6 Dec 2022 18:51:14 +0000 (20:51 +0200)]
devlink: Move devlink port function hw_addr attr documentation
devlink port function hw_addr attr documentation is in mlx5 specific
file while there is nothing mlx5 specific about it.
Move it to devlink-port.rst.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Drory [Tue, 6 Dec 2022 18:51:13 +0000 (20:51 +0200)]
devlink: Validate port function request
In order to avoid partial request processing, validate the request
before processing it.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yishai Hadas [Tue, 6 Dec 2022 18:51:12 +0000 (20:51 +0200)]
net/mlx5: Introduce IFC bits for migratable
Introduce IFC related capabilities to enable setting VF to be able to
perform live migration. e.g.: to be migratable.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 8 Dec 2022 04:05:53 +0000 (20:05 -0800)]
Merge branch 'bridge-mcast-preparations-for-evpn-extensions'
Ido Schimmel says:
====================
bridge: mcast: Preparations for EVPN extensions
This patchset was split from [1] and includes non-functional changes
aimed at making it easier to add additional netlink attributes later on.
Future extensions are available here [2].
The idea behind these patches is to create an MDB configuration
structure into which netlink messages are parsed into. The structure is
then passed in the entry creation / deletion call chain instead of
passing the netlink attributes themselves. The same pattern is used by
other rtnetlink objects such as routes and nexthops.
I initially tried to extend the current code, but it proved to be too
difficult, which is why I decided to refactor it to the extensible and
familiar pattern used by other rtnetlink objects.
Tested using existing selftests and using a new selftest that will be
submitted together with the planned extensions.
[1] https://lore.kernel.org/netdev/
20221018120420.561846-1-idosch@nvidia.com/
[2] https://github.com/idosch/linux/commits/submit/mdb_v1
====================
Link: https://lore.kernel.org/r/20221206105809.363767-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 6 Dec 2022 10:58:09 +0000 (12:58 +0200)]
bridge: mcast: Constify 'group' argument in br_multicast_new_port_group()
The 'group' argument is not modified, so mark it as 'const'. It will
allow us to constify arguments of the callers of this function in future
patches.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 6 Dec 2022 10:58:08 +0000 (12:58 +0200)]
bridge: mcast: Remove redundant function arguments
Drop the first three arguments and instead extract them from the MDB
configuration structure.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 6 Dec 2022 10:58:07 +0000 (12:58 +0200)]
bridge: mcast: Move checks out of critical section
The checks only require information parsed from the RTM_NEWMDB netlink
message and do not rely on any state stored in the bridge driver.
Therefore, there is no need to perform the checks in the critical
section under the multicast lock.
Move the checks out of the critical section.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 6 Dec 2022 10:58:06 +0000 (12:58 +0200)]
bridge: mcast: Remove br_mdb_parse()
The parsing of the netlink messages and the validity checks are now
performed in br_mdb_config_init() so we can remove br_mdb_parse().
This finally allows us to stop passing netlink attributes deep in the
MDB control path and only use the MDB configuration structure.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 6 Dec 2022 10:58:05 +0000 (12:58 +0200)]
bridge: mcast: Use MDB group key from configuration structure
The MDB group key (i.e., {source, destination, protocol, VID}) is
currently determined under the multicast lock from the netlink
attributes. Instead, use the group key from the MDB configuration
structure that was prepared before acquiring the lock.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 6 Dec 2022 10:58:04 +0000 (12:58 +0200)]
bridge: mcast: Propagate MDB configuration structure further
As an intermediate step towards only using the new MDB configuration
structure, pass it further in the control path instead of passing
individual attributes.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 6 Dec 2022 10:58:03 +0000 (12:58 +0200)]
bridge: mcast: Use MDB configuration structure where possible
The MDB configuration structure (i.e., struct br_mdb_config) now
includes all the necessary information from the parsed RTM_{NEW,DEL}MDB
netlink messages, so use it.
This will later allow us to delete the calls to br_mdb_parse() from
br_mdb_add() and br_mdb_del().
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 6 Dec 2022 10:58:02 +0000 (12:58 +0200)]
bridge: mcast: Remove redundant checks
These checks are now redundant as they are performed by
br_mdb_config_init() while parsing the RTM_{NEW,DEL}MDB messages.
Remove them.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 6 Dec 2022 10:58:01 +0000 (12:58 +0200)]
bridge: mcast: Centralize netlink attribute parsing
Netlink attributes are currently passed deep in the MDB creation call
chain, making it difficult to add new attributes. In addition, some
validity checks are performed under the multicast lock although they can
be performed before it is ever acquired.
As a first step towards solving these issues, parse the RTM_{NEW,DEL}MDB
messages into a configuration structure, relieving other functions from
the need to handle raw netlink attributes.
Subsequent patches will convert the MDB code to use this configuration
structure.
This is consistent with how other rtnetlink objects are handled, such as
routes and nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ye xingchen [Mon, 5 Dec 2022 11:18:56 +0000 (19:18 +0800)]
net: ethernet: use sysfs_emit() to instead of scnprintf()
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/202212051918564721658@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 8 Dec 2022 01:33:26 +0000 (17:33 -0800)]
Merge tag 'ieee802154-for-net-next-2022-12-05' of git://git./linux/kernel/git/sschmidt/wpan-next
Stefan Schmidt says:
====================
ieee802154-next 2022-12-05
Miquel continued his work towards full scanning support. For this,
we now allow the creation of dedicated coordinator interfaces
to allow a PAN coordinator to serve in the network and set
the needed address filters with the hardware.
On top of this we have the first part to allow scanning for available
15.4 networks. A new netlink scan group, within the existing nl802154
API, was added.
In addition Miquel fixed two issues that have been introduced in the former
patches to free an skb correctly and clarifying an expression in the stack.
From David Girault we got tracing support when registering new PANs.
* tag 'ieee802154-for-net-next-2022-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next:
mac802154: Trace the registration of new PANs
ieee802154: Advertize coordinators discovery
mac802154: Allow the creation of coordinator interfaces
mac802154: Clarify an expression
mac802154: Move an skb free within the rx path
====================
Link: https://lore.kernel.org/r/20221205131909.1871790-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Mon, 5 Dec 2022 13:21:02 +0000 (14:21 +0100)]
net: asix: add support for the Linux Automation GmbH USB 10Base-T1L
Add ASIX based USB 10Base-T1L adapter support:
https://linux-automation.com/en/products/usb-t1l.html
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20221205132102.2941732-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Wed, 7 Dec 2022 11:28:06 +0000 (12:28 +0100)]
Merge branch 'cn10kb-mac-block-support'
Hariprasad Kelam says:
====================
CN10KB MAC block support
OcteonTx2's next gen platform the CN10KB has RPM_USX MAC which has a
different serdes when compared to RPM MAC. Though the underlying
HW is different, the CSR interface has been designed largely inline
with RPM MAC, with few exceptions though. So we are using the same
CGX driver for RPM_USX MAC as well and will have a different set of APIs
for RPM_USX where ever necessary.
The RPM and RPM_USX blocks support a different number of LMACS.
RPM_USX support 8 LMACS per MAC block whereas legacy RPM supports only 4
LMACS per MAC. with this RPM_USX support double the number of DMAC filters
and fifo size.
This patchset adds initial support for CN10KB's RPM_USX MAC i.e
registering the driver and defining MAC operations (mac_ops). With these
changes PF and VF netdev packet path will work and PF and VF netdev drivers
are able to configure MAC features like pause frames,PFC and loopback etc.
Also implements FEC stats for CN10K Mac block RPM and CN10KB Mac block
RPM_USX and extends ethtool support for PF and VF drivers by defining
get_fec_stats API to display FEC stats.
====================
Link: https://lore.kernel.org/r/20221205070521.21860-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hariprasad Kelam [Mon, 5 Dec 2022 07:05:21 +0000 (12:35 +0530)]
octeontx2-af: Add FEC stats for RPM/RPM_USX block
CN10K silicon MAC block RPM and CN10KB silicon MAC block RPM_USX
both support BASER and RSFEC modes.
Also MAC (CGX) on OcteonTx2 silicon variants and MAC (RPM) on
OcteonTx3 CN10K are different and FEC stats need to be read
differently. CN10KB MAC block (RPM_USX) fec csr offsets are same
as CN10K MAC block (RPM) mac_ops points to same fn(). Upper layer
interface between RVU AF and PF netdev is kept same. Based on
silicon variant appropriate fn() pointer is called to read FEC stats
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hariprasad Kelam [Mon, 5 Dec 2022 07:05:20 +0000 (12:35 +0530)]
octeontx2-pf: ethtool: Implement get_fec_stats
This patch registers a callback for get_fec_stats such that
FEC stats can be queried from the below command
"ethtool -I --show-fec eth0"
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hariprasad Kelam [Mon, 5 Dec 2022 07:05:19 +0000 (12:35 +0530)]
octeontx2-af: cn10kb: Add RPM_USX MAC support
OcteonTx2's next gen platform the CN10KB has RPM_USX MAC which has a
different serdes when compared to RPM MAC. Though the underlying
HW is different, the CSR interface has been designed largely inline
with RPM MAC, with few exceptions though. So we are using the same
CGX driver for RPM_USX MAC as well and will have a different set of APIs
for RPM_USX where ever necessary.
The RPM and RPM_USX blocks support a different number of LMACS.
RPM_USX support 8 LMACS per MAC block whereas legacy RPM supports only 4
LMACS per MAC. with this RPM_USX support double the number of DMAC filters
and fifo size.
This patch adds initial support for CN10KB's RPM_USX MAC i.e registering
the driver and defining MAC operations (mac_ops). Adds the logic to
configure internal loopback and pause frames and assign FIFO length to
LMACS.
Kernel reads lmac features like lmac type, autoneg, etc from shared
firmware data this structure only supports 4 lmacs per MAC, this patch
extends this structure to accommodate 8 lmacs.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rakesh Babu Saladi [Mon, 5 Dec 2022 07:05:18 +0000 (12:35 +0530)]
octeontx2-af: Support variable number of lmacs
Most of the code in CGX/RPM driver assumes that max lmacs per
given MAC as always, 4 and the number of MAC blocks also as 4.
With this assumption, the max number of interfaces supported is
hardcoded to 16. This creates a problem as next gen CN10KB silicon
MAC supports 8 lmacs per MAC block.
This patch solves the problem by using "max lmac per MAC block"
value from constant csrs and uses cgx_cnt_max value which is
populated based number of MAC blocks supported by silicon.
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Wed, 7 Dec 2022 10:58:00 +0000 (11:58 +0100)]
Merge branch 'net-dsa-microchip-add-mtu-support-for-ksz8-series'
Oleksij Rempel says:
====================
net: dsa: microchip: add MTU support for KSZ8 series
====================
Link: https://lore.kernel.org/r/20221205052232.2834166-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Mon, 5 Dec 2022 05:22:32 +0000 (06:22 +0100)]
net: dsa: microchip: ksz8: move all DSA configurations to one location
To make the code more comparable to KSZ9477 code, move DSA
configurations to the same location.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Mon, 5 Dec 2022 05:22:31 +0000 (06:22 +0100)]
net: dsa: microchip: enable MTU normalization for KSZ8795 and KSZ9477 compatible switches
KSZ8795 and KSZ9477 compatible series of switches use global max frame
size configuration register. So, enable MTU normalization for this reason.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Mon, 5 Dec 2022 05:22:30 +0000 (06:22 +0100)]
net: dsa: microchip: ksz8: add MTU configuration support
Make MTU configurable on KSZ87xx and KSZ88xx series of switches.
Before this patch, pre-configured behavior was different on different
switch series, due to opposite meaning of the same bit:
- KSZ87xx: Reg 4, Bit 1 - if 1, max frame size is 1532; if 0 - 1514
- KSZ88xx: Reg 4, Bit 1 - if 1, max frame size is 1514; if 0 - 1532
Since the code was telling "... SW_LEGAL_PACKET_DISABLE, true)", I
assume, the idea was to set max frame size to 1532.
With this patch, by setting MTU size 1500, both switch series will be
configured to the 1532 frame limit.
This patch was tested on KSZ8873.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Mon, 5 Dec 2022 05:22:29 +0000 (06:22 +0100)]
net: dsa: microchip: add ksz_rmw8() function
Add ksz_rmw8(), it will be used in the next patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Mon, 5 Dec 2022 05:22:28 +0000 (06:22 +0100)]
net: dsa: microchip: do not store max MTU for all ports
If we have global MTU configuration, it is enough to configure it on CPU
port only.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel [Mon, 5 Dec 2022 05:22:27 +0000 (06:22 +0100)]
net: dsa: microchip: move max mtu to one location
There are no HW specific registers, so we can process all of them
in one location.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Arun Ramadoss <arun.ramadoss@microchip.com> (KSZ9893 and LAN937x)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yuan Can [Mon, 5 Dec 2022 03:43:39 +0000 (03:43 +0000)]
net: ethernet: mtk_wed: Fix missing of_node_put() in mtk_wed_wo_hardware_init()
The np needs to be released through of_node_put() in the error handling
path of mtk_wed_wo_hardware_init().
Fixes:
799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221205034339.112163-1-yuancan@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lorenzo Bianconi [Mon, 5 Dec 2022 11:34:42 +0000 (12:34 +0100)]
net: ethernet: mtk_wed: add reset to rx_ring_setup callback
This patch adds reset parameter to mtk_wed_rx_ring_setup signature
in order to align rx_ring_setup callback to tx_ring_setup one introduced
in 'commit
23dca7a90017 ("net: ethernet: mtk_wed: add reset to
tx_ring_setup callback")'
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/29c6e7a5469e784406cf3e2920351d1207713d05.1670239984.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
zhang songyi [Mon, 5 Dec 2022 06:22:15 +0000 (14:22 +0800)]
net: microchip: vcap: Remove unneeded semicolons
Semicolons after "}" are not needed.
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/202212051422158113766@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ye xingchen [Mon, 5 Dec 2022 02:21:45 +0000 (10:21 +0800)]
sfc: use sysfs_emit() to instead of scnprintf()
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/202212051021451139126@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Sat, 3 Dec 2022 17:25:15 +0000 (17:25 +0000)]
net: sfp: clean up i2c-bus property parsing
We currently have some complicated code in sfp_probe() which gets the
I2C bus depending on whether the sfp node is DT or ACPI, and we use
completely separate lookup functions.
This could do with being in a separate function to make the code more
readable, so move it to a new function, sfp_i2c_get(). We can also use
fwnode_find_reference() to lookup the I2C bus fwnode before then
decending into fwnode-type specific parsing.
A future cleanup would be to move the fwnode-type specific parsing into
the i2c layer, which is where it really should be.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1p1WGJ-0098wS-4w@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kees Cook [Fri, 2 Dec 2022 21:24:22 +0000 (13:24 -0800)]
net/ncsi: Silence runtime memcpy() false positive warning
The memcpy() in ncsi_cmd_handler_oem deserializes nca->data into a
flexible array structure that overlapping with non-flex-array members
(mfr_id) intentionally. Since the mem_to_flex() API is not finished,
temporarily silence this warning, since it is a false positive, using
unsafe_memcpy().
Reported-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/netdev/CACPK8Xdfi=OJKP0x0D1w87fQeFZ4A2DP2qzGCRcuVbpU-9=4sQ@mail.gmail.com/
Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221202212418.never.837-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 6 Dec 2022 12:26:45 +0000 (13:26 +0100)]
Merge branch 'net-lan966x-enable-ptp-on-bridge-interfaces'
Horatiu Vultur says:
====================
net: lan966x: Enable PTP on bridge interfaces
Before it was not allowed to run ptp on ports that are part of a bridge
because in case of transparent clock the HW will still forward the frames
so there would be duplicate frames.
Now that there is VCAP support, it is possible to add entries in the VCAP
to trap frames to the CPU and the CPU will forward these frames.
The first part of the patch series, extends the VCAP support to be able to
modify and get the rule, while the last patch uses the VCAP to trap the ptp
frames.
====================
Link: https://lore.kernel.org/r/20221203104348.1749811-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Horatiu Vultur [Sat, 3 Dec 2022 10:43:48 +0000 (11:43 +0100)]
net: lan966x: Add ptp trap rules
Currently lan966x, doesn't allow to run PTP over interfaces that are
part of the bridge. The reason is when the lan966x was receiving a
PTP frame (regardless if L2/IPv4/IPv6) the HW it would flood this
frame.
Now that it is possible to add VCAP rules to the HW, such to trap these
frames to the CPU, it is possible to run PTP also over interfaces that
are part of the bridge.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Horatiu Vultur [Sat, 3 Dec 2022 10:43:47 +0000 (11:43 +0100)]
net: microchip: vcap: Add vcap_rule_get_key_u32
Add the function vcap_rule_get_key_u32 which allows to get the value and
the mask of a key that exist on the rule. If the key doesn't exist,
it would return error.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Horatiu Vultur [Sat, 3 Dec 2022 10:43:46 +0000 (11:43 +0100)]
net: microchip: vcap: Add vcap_mod_rule
Add the function vcap_mod_rule which allows to update an existing rule
in the vcap. It is required for the rule to exist in the vcap to be able
to modify it.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Horatiu Vultur [Sat, 3 Dec 2022 10:43:45 +0000 (11:43 +0100)]
net: microchip: vcap: Add vcap_get_rule
Add function vcap_get_rule which returns a rule based on the internal
rule id.
The entire functionality of reading and decoding the rule from the VCAP
was inside vcap_api_debugfs file. So move the entire implementation in
vcap_api as this is used also by vcap_get_rule.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lorenzo Bianconi [Sat, 3 Dec 2022 13:20:37 +0000 (14:20 +0100)]
net: mtk_eth_soc: enable flow offload support for MT7986 SoC
Since Wireless Ethernet Dispatcher is now available for mt7986 in mt76,
enable hw flow support for MT7986 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/fdcaacd827938e6a8c4aa1ac2c13e46d2c08c821.1670072898.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sudheer Mogilappagari [Fri, 2 Dec 2022 00:25:55 +0000 (16:25 -0800)]
ethtool: add netlink based get rss support
Add netlink based support for "ethtool -x <dev> [context x]"
command by implementing ETHTOOL_MSG_RSS_GET netlink message.
This is equivalent to functionality provided via ETHTOOL_GRSSH
in ioctl path. It sends RSS table, hash key and hash function
of an interface to user space.
This patch implements existing functionality available
in ioctl path and enables addition of new RSS context
based parameters in future.
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Walle [Fri, 2 Dec 2022 14:49:00 +0000 (15:49 +0100)]
net: phy: mxl-gpy: rename MMD_VEND1 macros to match datasheet
Rename the temperature sensors macros to match the names in the
datasheet.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diana Wang [Fri, 2 Dec 2022 09:42:14 +0000 (10:42 +0100)]
nfp: add support for multicast filter
Rewrite nfp_net_set_rx_mode() to implement interface to delivery
mc address and operations to firmware by using general mailbox
for filtering multicast packets.
The operations include add mc address and delete mc address.
And the limitation of mc addresses number is 1024 for each net
device.
User triggers adding mc address by using command below:
ip maddress add <mc address> dev <interface name>
User triggers deleting mc address by using command below:
ip maddress del <mc address> dev <interface name>
Signed-off-by: Diana Wang <na.wang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ye xingchen [Fri, 2 Dec 2022 08:42:14 +0000 (16:42 +0800)]
net: ipa: use sysfs_emit() to instead of scnprintf()
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 5 Dec 2022 10:58:17 +0000 (10:58 +0000)]
Merge tag 'rxrpc-next-
20221201-b' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Increasing SACK size and moving away from softirq, parts 2 & 3
Here are the second and third parts of patches in the process of moving
rxrpc from doing a lot of its stuff in softirq context to doing it in an
I/O thread in process context and thereby making it easier to support a
larger SACK table.
The full description is in the description for the first part[1] which is
already in net-next.
The second part includes some cleanups, adds some testing and overhauls
some tracing:
(1) Remove declaration of rxrpc_kernel_call_is_complete() as the
definition is no longer present.
(2) Remove the knet() and kproto() macros in favour of using tracepoints.
(3) Remove handling of duplicate packets from recvmsg. The input side
isn't now going to insert overlapping/duplicate packets into the
recvmsg queue.
(4) Don't use the rxrpc_conn_parameters struct in the rxrpc_connection or
rxrpc_bundle structs - rather put the members in directly.
(5) Extract the abort code from a received abort packet right up front
rather than doing it in multiple places later.
(6) Use enums and symbol lists rather than __builtin_return_address() to
indicate where a tracepoint was triggered for local, peer, conn, call
and skbuff tracing.
(7) Add a refcount tracepoint for the rxrpc_bundle struct.
(8) Implement an in-kernel server for the AFS rxperf testing program to
talk to (enabled by a Kconfig option).
This is tagged as rxrpc-next-
20221201-a.
The third part introduces the I/O thread and switches various bits over to
running there:
(1) Fix call timers and call and connection workqueues to not hold refs on
the rxrpc_call and rxrpc_connection structs to thereby avoid messy
cleanup when the last ref is put in softirq mode.
(2) Split input.c so that the call packet processing bits are separate
from the received packet distribution bits. Call packet processing
gets bumped over to the call event handler.
(3) Create a per-local endpoint I/O thread. Barring some tiny bits that
still get done in softirq context, all packet reception, processing
and transmission is done in this thread. That will allow a load of
locking to be removed.
(4) Perform packet processing and error processing from the I/O thread.
(5) Provide a mechanism to process call event notifications in the I/O
thread rather than queuing a work item for that call.
(6) Move data and ACK transmission into the I/O thread. ACKs can then be
transmitted at the point they're generated rather than getting
delegated from softirq context to some process context somewhere.
(7) Move call and local processor event handling into the I/O thread.
(8) Move cwnd degradation to after packets have been transmitted so that
they don't shorten the window too quickly.
A bunch of simplifications can then be done:
(1) The input_lock is no longer necessary as exclusion is achieved by
running the code in the I/O thread only.
(2) Don't need to use sk->sk_receive_queue.lock to guard socket state
changes as the socket mutex should suffice.
(3) Don't take spinlocks in RCU callback functions as they get run in
softirq context and thus need _bh annotations.
(4) RCU is then no longer needed for the peer's error_targets list.
(5) Simplify the skbuff handling in the receive path by dropping the ref
in the basic I/O thread loop and getting an extra ref as and when we
need to queue the packet for recvmsg or another context.
(6) Get the peer address earlier in the input process and pass it to the
users so that we only do it once.
This is tagged as rxrpc-next-
20221201-b.
Changes:
========
ver #2)
- Added a patch to change four assertions into warnings in rxrpc_read()
and fixed a checker warning from a __user annotation that should have
been removed..
- Change a min() to min_t() in rxperf as PAGE_SIZE doesn't seem to match
type size_t on i386.
- Three error handling issues in rxrpc_new_incoming_call():
- If not DATA or not seq #1, should drop the packet, not abort.
- Fix a goto that went to the wrong place, dropping a non-held lock.
- Fix an rcu_read_lock that should've been an unlock.
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: kafs-testing+fedora36_64checkkafs-build-144@auristor.com
Link: https://lore.kernel.org/r/166794587113.2389296.16484814996876530222.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/166982725699.621383.2358362793992993374.stgit@warthog.procyon.org.uk/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhadram Varka [Thu, 1 Dec 2022 15:58:44 +0000 (15:58 +0000)]
net: stmmac: tegra: Add MGBE support
Add support for the Multi-Gigabit Ethernet (MGBE/XPCS) IP found on
NVIDIA Tegra234 SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Co-developed-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Signed-off-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revanth Kumar Uppala [Thu, 1 Dec 2022 15:58:43 +0000 (15:58 +0000)]
net: stmmac: Power up SERDES after the PHY link
The Tegra MGBE ethernet controller requires that the SERDES link is
powered-up after the PHY link is up, otherwise the link fails to
become ready following a resume from suspend. Add a variable to indicate
that the SERDES link must be powered-up after the PHY link.
Signed-off-by: Revanth Kumar Uppala <ruppala@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 3 Dec 2022 21:49:23 +0000 (21:49 +0000)]
Merge branch 'r8169-irq-coalesce'
Heiner Kallweit says:
====================
net: add and use netdev_sw_irq_coalesce_default_on()
There are reports about r8169 not reaching full line speed on certain
systems (e.g. SBC's) with a 2.5Gbps link.
There was a time when hardware interrupt coalescing was enabled per
default, but this was changed due to ASPM-related issues on few systems.
Meanwhile we have sysfs attributes for controlling kind of
"software interrupt coalescing" on the GRO level. However most distros
and users don't know about it. So lets set a conservative default for
both involved parameters. Users can still override the defaults via
sysfs. Don't enable these settings on the fast ethernet chip versions,
they are slow enough.
Even with these conservative setting interrupt load on my 1Gbps test
system reduced significantly.
Follow Jakub's suggestion and put this functionality into net core
so that other MAC drivers can reuse it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 30 Nov 2022 22:30:15 +0000 (23:30 +0100)]
r8169: enable GRO software interrupt coalescing per default
There are reports about r8169 not reaching full line speed on certain
systems (e.g. SBC's) with a 2.5Gbps link.
There was a time when hardware interrupt coalescing was enabled per
default, but this was changed due to ASPM-related issues on few systems.
So let's use software interrupt coalescing instead and enable it
using new function netdev_sw_irq_coalesce_default_on().
Even with these conservative settings interrupt load on my 1Gbps test
system reduced significantly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 30 Nov 2022 22:28:26 +0000 (23:28 +0100)]
net: add netdev_sw_irq_coalesce_default_on()
Add a helper for drivers wanting to set SW IRQ coalescing
by default. The related sysfs attributes can be used to
override the default values.
Follow Jakub's suggestion and put this functionality into
net core so that drivers wanting to use software interrupt
coalescing per default don't have to open-code it.
Note that this function needs to be called before the
netdevice is registered.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Thu, 1 Dec 2022 15:26:53 +0000 (16:26 +0100)]
net: ethernet: mtk_wed: fix sleep while atomic in mtk_wed_wo_queue_refill
In order to fix the following sleep while atomic bug always alloc pages
with GFP_ATOMIC in mtk_wed_wo_queue_refill since page_frag_alloc runs in
spin_lock critical section.
[ 9.049719] Hardware name: MediaTek MT7986a RFB (DT)
[ 9.054665] Call trace:
[ 9.057096] dump_backtrace+0x0/0x154
[ 9.060751] show_stack+0x14/0x1c
[ 9.064052] dump_stack_lvl+0x64/0x7c
[ 9.067702] dump_stack+0x14/0x2c
[ 9.071001] ___might_sleep+0xec/0x120
[ 9.074736] __might_sleep+0x4c/0x9c
[ 9.078296] __alloc_pages+0x184/0x2e4
[ 9.082030] page_frag_alloc_align+0x98/0x1ac
[ 9.086369] mtk_wed_wo_queue_refill+0x134/0x234
[ 9.090974] mtk_wed_wo_init+0x174/0x2c0
[ 9.094881] mtk_wed_attach+0x7c8/0x7e0
[ 9.098701] mt7915_mmio_wed_init+0x1f0/0x3a0 [mt7915e]
[ 9.103940] mt7915_pci_probe+0xec/0x3bc [mt7915e]
[ 9.108727] pci_device_probe+0xac/0x13c
[ 9.112638] really_probe.part.0+0x98/0x2f4
[ 9.116807] __driver_probe_device+0x94/0x13c
[ 9.121147] driver_probe_device+0x40/0x114
[ 9.125314] __driver_attach+0x7c/0x180
[ 9.129133] bus_for_each_dev+0x5c/0x90
[ 9.132953] driver_attach+0x20/0x2c
[ 9.136513] bus_add_driver+0x104/0x1fc
[ 9.140333] driver_register+0x74/0x120
[ 9.144153] __pci_register_driver+0x40/0x50
[ 9.148407] mt7915_init+0x5c/0x1000 [mt7915e]
[ 9.152848] do_one_initcall+0x40/0x25c
[ 9.156669] do_init_module+0x44/0x230
[ 9.160403] load_module+0x1f30/0x2750
[ 9.164135] __do_sys_init_module+0x150/0x200
[ 9.168475] __arm64_sys_init_module+0x18/0x20
[ 9.172901] invoke_syscall.constprop.0+0x4c/0xe0
[ 9.177589] do_el0_svc+0x48/0xe0
[ 9.180889] el0_svc+0x14/0x50
[ 9.183929] el0t_64_sync_handler+0x9c/0x120
[ 9.188183] el0t_64_sync+0x158/0x15c
Fixes:
799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/67ca94bdd3d9eaeb86e52b3050fbca0bcf7bb02f.1669908312.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 2 Dec 2022 05:28:47 +0000 (05:28 +0000)]
tcp: use 2-arg optimal variant of kfree_rcu()
kfree_rcu(1-arg) should be avoided as much as possible,
since this is only possible from sleepable contexts,
and incurr extra rcu barriers.
I wish the 1-arg variant of kfree_rcu() would
get a distinct name, like kfree_rcu_slow()
to avoid it being abused.
Fixes:
459837b522f7 ("net/tcp: Disable TCP-MD5 static key on tcp_md5sig_info destruction")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20221202052847.2623997-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 3 Dec 2022 04:33:29 +0000 (20:33 -0800)]
Merge tag 'wireless-next-2022-12-02' of git://git./linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.2
Third set of patches for v6.2. mt76 has a new driver for mt7996 Wi-Fi 7
devices and iwlwifi also got initial Wi-Fi 7 support. Otherwise
smaller features and fixes.
Major changes:
ath10k
- store WLAN firmware version in SMEM image table
mt76
- mt7996: new driver for MediaTek Wi-Fi 7 (802.11be) devices
- mt7986, mt7915: enable Wireless Ethernet Dispatch (WED) offload support
- mt7915: add ack signal support
- mt7915: enable coredump support
- mt7921: remain_on_channel support
- mt7921: channel context support
iwlwifi
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
* tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (144 commits)
wifi: ath10k: fix QCOM_SMEM dependency
wifi: mt76: mt7921e: add pci .shutdown() support
wifi: mt76: mt7915: mmio: fix naming convention
wifi: mt76: mt7996: add support to configure spatial reuse parameter set
wifi: mt76: mt7996: enable ack signal support
wifi: mt76: mt7996: enable use_cts_prot support
wifi: mt76: mt7915: rely on band_idx of mt76_phy
wifi: mt76: mt7915: enable per bandwidth power limit support
wifi: mt76: mt7915: introduce mt7915_get_power_bound()
mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2()
wifi: mt76: do not send firmware FW_FEATURE_NON_DL region
wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc
wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices
wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_power
wifi: mt76: mt7915: fix band_idx usage
wifi: mt76: mt7915: enable .sta_set_txpwr support
wifi: mt76: mt7915: add basedband Txpower info into debugfs
wifi: mt76: mt7915: add support to configure spatial reuse parameter set
wifi: mt76: mt7915: add missing MODULE_PARM_DESC
...
====================
Link: https://lore.kernel.org/r/20221202214254.D0D3DC433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo [Fri, 2 Dec 2022 10:30:27 +0000 (12:30 +0200)]
wifi: ath10k: fix QCOM_SMEM dependency
Nathan noticed that when HWSPINLOCK is disabled there's a Kconfig warning:
WARNING: unmet direct dependencies detected for QCOM_SMEM
Depends on [n]: (ARCH_QCOM [=y] || COMPILE_TEST [=n]) && HWSPINLOCK [=n]
Selected by [m]:
- ATH10K_SNOC [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && ATH10K [=m] && (ARCH_QCOM [=y] || COMPILE_TEST [=n])
The problem here is that QCOM_SMEM depends on HWSPINLOCK so we cannot select
QCOM_SMEM and instead we neeed to use 'depends on'.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/Y4YsyaIW+CPdHWv3@dev-arch.thelio-3990X/
Fixes:
4d79f6f34bbb ("wifi: ath10k: Store WLAN firmware version in SMEM image table")
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202103027.25974-1-kvalo@kernel.org
Gerhard Engleder [Wed, 30 Nov 2022 19:37:08 +0000 (20:37 +0100)]
tsnep: Rework RX buffer allocation
Refill RX queue in batches of descriptors to improve performance. Refill
is allowed to fail as long as a minimum number of descriptors is active.
Thus, a limited number of failed RX buffer allocations is now allowed
for normal operation. Previously every failed allocation resulted in a
dropped frame.
If the minimum number of active descriptors is reached, then RX buffers
are still reused and frames are dropped. This ensures that the RX queue
never runs empty and always continues to operate.
Prework for future XDP support.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>