review.tizen.org Git - platform/kernel/linux-rpi.git/log

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"Nothing very exciting here, just a few small bug fixes. No red flags
  for this release have shown up.

   - Regression from the last pull request in cxgb4 related to the ipv6
     fixes

   - KASAN crasher in rtrs

   - oops in hfi1 related to a buggy BIOS

   - Userspace could oops qedr's XRC support

   - Uninitialized memory when parsing a LS_NLA_TYPE_DGID netlink
     message"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/addr: Be strict with gid size
  RDMA/qedr: Fix kernel panic when trying to access recv_cq
  IB/hfi1: Fix probe time panic when AIP is enabled with a buggy BIOS
  RDMA/cxgb4: check for ipv6 address properly while destroying listener
  RDMA/rtrs-clt: Close rtrs client conn before destroying rtrs clt session files

RDMA/addr: Be strict with gid size

The nla_len() is less than or equal to 16. If it's less than 16 then end
of the "gid" buffer is uninitialized.

Fixes: ae43f8286730 ("IB/core: Add IP to GID netlink offload")
Link: https://lore.kernel.org/r/20210405074434.264221-1-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 's390-5.12-6' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

- fix incorrect dereference of the ext_params2 external interrupt
   parameter, which leads to an instant kernel crash if a pfault
   interrupt occurs.

- add forgotten stack unwinder support, and fix memory leak for the
   new machine check handler stack.

- fix inline assembly register clobbering due to KASAN code
   instrumentation.

* tag 's390-5.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/setup: use memblock_free_late() to free old stack
  s390/irq: fix reading of ext_params2 field from lowcore
  s390/unwind: add machine check handler stack
  s390/cpcmd: fix inline assembly register clobbering

Merge tag 'sound-5.12-rc7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"This batch became unexpectedly bigger due to the pending ASoC patches,
  but all look small and fine device-specific fixes.

  Many of the commits are for ASoC Intel drivers, while the rest are for
  ASoC small codec/platform fixes and HD-audio quirks"

* tag 'sound-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
  ALSA: hda/realtek: Fix speaker amp setup on Acer Aspire E1
  ALSA: aloop: Fix initialization of controls
  ALSA: hda/conexant: Apply quirk for another HP ZBook G5 model
  ASoC: fsl_esai: Fix TDM slot setup for I2S mode
  ASoC: codecs: lpass-rx-macro: set npl clock rate correctly
  ASoC: codecs: lpass-tx-macro: set npl clock rate correctly
  ASoC: sunxi: sun4i-codec: fill ASoC card owner
  ASoC: cygnus: fix for_each_child.cocci warnings
  ASoC: max98373: Added 30ms turn on/off time delay
  ASoC: max98373: Changed amp shutdown register as volatile
  ASoC: intel: atom: Remove 44100 sample-rate from the media and deep-buffer DAI descriptions
  ASoC: intel: atom: Stop advertising non working S24LE support
  ASoC: wm8960: Fix wrong bclk and lrclk with pll enabled for some chips
  ASoC: SOF: Intel: move ELH chip info
  ASoC: SOF: Intel: APL: set shutdown callback to hda_dsp_shutdown
  ASoC: SOF: Intel: CNL: set shutdown callback to hda_dsp_shutdown
  ASoC: SOF: Intel: ICL: set shutdown callback to hda_dsp_shutdown
  ASoC: SOF: Intel: TGL: set shutdown callback to hda_dsp_shutdown
  ASoC: SOF: Intel: TGL: fix EHL ops
  ASoC: SOF: core: harden shutdown helper
  ...

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fix from Paolo Bonzini:
"A lone x86 patch, for a bug found while developing a backport to
stable versions"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: preserve pending TLB flush across calls to kvm_tdp_mmu_zap_sp

Merge tag 'for-linus-2021-04-08' of git://git./linux/kernel/git/brauner/linux

Pull close_range() fix from Christian Brauner:
"Syzbot reported a bug in close_range.

  Debugging this showed we didn't recalculate the current maximum fd
  number for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC after we unshared
  the file descriptors table. As a result, max_fd could exceed the
  current fdtable maximum causing us to set excessive bits.

  As a concrete example, let's say the user requested everything from fd
  4 to ~0UL to be closed and their current fdtable size is 256 with
  their highest open fd being 4. With CLOSE_RANGE_UNSHARE the caller
  will end up with a new fdtable which has room for 64 file descriptors
  since that is the lowest fdtable size we accept. But now max_fd will
  still point to 255 and needs to be adjusted. Fix this by retrieving
  the correct maximum fd value in __range_cloexec().

  I've carried this fix for a little while but since there was no
  linux-next release over easter I waited until now.

  With this change close_range() can be further simplified but imho we
  are in no hurry to do that and so I'll defer this for the 5.13 merge
  window"

* tag 'for-linus-2021-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  file: fix close_range() for unshare+cloexec

Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs

Pull umount fix from Al Viro:
"Brown paperbag time: dumb braino in the series that went into 5.7
  broke the 'don't step into ->d_weak_revalidate() when umount(2) looks
  the victim up' behaviour.

  Spotted only now - saw

        if (!err && unlikely(nd->flags & LOOKUP_MOUNTPOINT)) {
                err = handle_lookup_down(nd);
                nd->flags &= ~LOOKUP_JUMPED; // no d_weak_revalidate(), please...
        }

  and went "why do we clear that flag here - nothing below that point is
  going to check it anyway" / "wait a minute, what is it doing *after*
  complete_walk() (which is where we check that flag and call
  ->d_weak_revalidate())" / "how could that possibly _not_ break?",
  followed by reproducing the breakage and verifying that the obvious
  fix of that braino does, indeed, fix it.

  The reproducer is (assuming that $DIR exists and is exported r/w to
  localhost)

      mkdir $DIR/a
      mkdir /tmp/foo
      mount --bind /tmp/foo /tmp/foo
      mkdir /tmp/foo/a
      mkdir /tmp/foo/b
      mount -t nfs4 localhost:$DIR/a /tmp/foo/a
      mount -t nfs4 localhost:$DIR /tmp/foo/b
      rmdir /tmp/foo/b/a
      umount /tmp/foo/b
      umount /tmp/foo/a
      umount -l /tmp/foo      # will get everything under /tmp/foo, no matter what

  Correct behaviour is successful umount; broken kernels (5.7-rc1 and
  later) get

      umount.nfs4: /tmp/foo/a: Stale file handle

  Note that bind mount is there to be able to recover - on broken
  kernels we'd get stuck with impossible-to-umount filesystem if not for
  that.

  FWIW, that braino had been posted for review back then, at least
  twice. Unfortunately, the call of complete_walk() was outside of diff
  context, so the bogosity hadn't been immediately obvious from the
  patch alone ;-/"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  LOOKUP_MOUNTPOINT: we are cleaning "jumped" flag too late

KVM: x86/mmu: preserve pending TLB flush across calls to kvm_tdp_mmu_zap_sp

Right now, if a call to kvm_tdp_mmu_zap_sp returns false, the caller
will skip the TLB flush, which is wrong.  There are two ways to fix
it:

- since kvm_tdp_mmu_zap_sp will not yield and therefore will not flush
  the TLB itself, we could change the call to kvm_tdp_mmu_zap_sp to
  use "flush |= ..."

- or we can chain the flush argument through kvm_tdp_mmu_zap_sp down
  to __kvm_tdp_mmu_zap_gfn_range.  Note that kvm_tdp_mmu_zap_sp will
  neither yield nor flush, so flush would never go from true to
  false.

This patch does the former to simplify application to stable kernels,
and to make it further clearer that kvm_tdp_mmu_zap_sp will not flush.

Cc: seanjc@google.com
Fixes: 048f49809c526 ("KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping")
Cc: <stable@vger.kernel.org> # 5.10.x: 048f49809c: KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
Cc: <stable@vger.kernel.org> # 5.10.x: 33a3164161: KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
Cc: <stable@vger.kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ALSA: hda/realtek: Fix speaker amp setup on Acer Aspire E1

We've got a report about Acer Aspire E1 (PCI SSID 1025:0840) that
loses the speaker output after resume. With the comparison of COEF
dumps, it was identified that the COEF 0x0d bits 0x6000 corresponds to
the speaker amp.

This patch adds the specific quirk for the device to restore the COEF
bits at the codec (re-)initialization.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1183869
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407095730.12560-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

RDMA/qedr: Fix kernel panic when trying to access recv_cq

As INI QP does not require a recv_cq, avoid the following null pointer
dereference by checking if the qp_type is not INI before trying to extract
the recv_cq.

BUG: kernel NULL pointer dereference, address: 00000000000000e0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 54250 Comm: mpitests-IMB-MP Not tainted 5.12.0-rc5 #1
Hardware name: Dell Inc. PowerEdge R320/0KM5PX, BIOS 2.7.0 08/19/2019
RIP: 0010:qedr_create_qp+0x378/0x820 [qedr]
Code: 02 00 00 50 e8 29 d4 a9 d1 48 83 c4 18 e9 65 fe ff ff 48 8b 53 10 48 8b 43 18 44 8b 82 e0 00 00 00 45 85 c0 0f 84 10 74 00 00 <8b> b8 e0 00 00 00 85 ff 0f 85 50 fd ff ff e9 fd 73 00 00 48 8d bd
RSP: 0018:ffff9c8f056f7a70 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff9c8f056f7b58 RCX: 0000000000000009
RDX: ffff8c41a9744c00 RSI: ffff9c8f056f7b58 RDI: ffff8c41c0dfa280
RBP: ffff8c41c0dfa280 R08: 0000000000000002 R09: 0000000000000001
R10: 0000000000000000 R11: ffff8c41e06fc608 R12: ffff8c4194052000
R13: 0000000000000000 R14: ffff8c4191546070 R15: ffff8c41c0dfa280
FS:  00007f78b2787b80(0000) GS:ffff8c43a3200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000e0 CR3: 00000001011d6002 CR4: 00000000001706f0
Call Trace:
  ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x4e4/0xb90 [ib_uverbs]
  ? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs]
  ib_uverbs_run_method+0x6f6/0x7a0 [ib_uverbs]
  ? ib_uverbs_handler_UVERBS_METHOD_QP_DESTROY+0x70/0x70 [ib_uverbs]
  ? __cond_resched+0x15/0x30
  ? __kmalloc+0x5a/0x440
  ib_uverbs_cmd_verbs+0x195/0x360 [ib_uverbs]
  ? xa_load+0x6e/0x90
  ? cred_has_capability+0x7c/0x130
  ? avc_has_extended_perms+0x17f/0x440
  ? vma_link+0xae/0xb0
  ? vma_set_page_prot+0x2a/0x60
  ? mmap_region+0x298/0x6c0
  ? do_mmap+0x373/0x520
  ? selinux_file_ioctl+0x17f/0x220
  ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs]
  __x64_sys_ioctl+0x84/0xc0
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f78b120262b

Fixes: 06e8d1df46ed ("RDMA/qedr: Add support for user mode XRC-SRQ's")
Link: https://lore.kernel.org/r/20210404125501.154789-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 'arc-5.12-rc7' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixlets from Vineet Gupta:
"A few straggler fixes for ARC"

* tag 'arc-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: treewide: avoid the pointer addition with NULL pointer
  arc: kernel: Return -EFAULT if copy_to_user() fails
  ARC: haps: bump memory to 1 GB

IB/hfi1: Fix probe time panic when AIP is enabled with a buggy BIOS

A panic can result when AIP is enabled:

  BUG: unable to handle kernel NULL pointer dereference at 000000000000000
  PGD 0 P4D 0
  Oops: 0000 1 SMP PTI
  CPU: 70 PID: 981 Comm: systemd-udevd Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1
  Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.01.01.0005.101720141054 10/17/2014
  RIP: 0010:__bitmap_and+0x1b/0x70
  RSP: 0018:ffff99aa0845f9f0 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff8d5a6fc18000 RCX: 0000000000000048
  RDX: 0000000000000000 RSI: ffffffffc06336f0 RDI: ffff8d5a8fa67750
  RBP: 0000000000000079 R08: 0000000fffffffff R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffffffffc06336f0
  R13: 00000000000000a0 R14: ffff8d5a6fc18000 R15: 0000000000000003
  FS: 00007fec137a5980(0000) GS:ffff8d5a9fa80000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 0000000a04b48002 CR4: 00000000001606e0
  Call Trace:
  hfi1_num_netdev_contexts+0x7c/0x110 [hfi1]
  hfi1_init_dd+0xd7f/0x1a90 [hfi1]
  ? pci_bus_read_config_dword+0x49/0x70
  ? pci_mmcfg_read+0x3e/0xe0
  do_init_one.isra.18+0x336/0x640 [hfi1]
  local_pci_probe+0x41/0x90
  pci_device_probe+0x105/0x1c0
  really_probe+0x212/0x440
  driver_probe_device+0x49/0xc0
  device_driver_attach+0x50/0x60
  __driver_attach+0x61/0x130
  ? device_driver_attach+0x60/0x60
  bus_for_each_dev+0x77/0xc0
  ? klist_add_tail+0x3b/0x70
  bus_add_driver+0x14d/0x1e0
  ? dev_init+0x10b/0x10b [hfi1]
  driver_register+0x6b/0xb0
  ? dev_init+0x10b/0x10b [hfi1]
  hfi1_mod_init+0x1e6/0x20a [hfi1]
  do_one_initcall+0x46/0x1c3
  ? free_unref_page_commit+0x91/0x100
  ? _cond_resched+0x15/0x30
  ? kmem_cache_alloc_trace+0x140/0x1c0
  do_init_module+0x5a/0x220
  load_module+0x14b4/0x17e0
  ? __do_sys_finit_module+0xa8/0x110
  __do_sys_finit_module+0xa8/0x110
  do_syscall_64+0x5b/0x1a0

The issue happens when pcibus_to_node() returns NO_NUMA_NODE.

Fix this issue by moving the initialization of dd->node to hfi1_devdata
allocation and remove the other pcibus_to_node() calls in the probe path
and use dd->node instead.

Affinity logic is adjusted to use a new field dd->affinity_entry as a
guard instead of dd->node.

Fixes: 4730f4a6c6b2 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/1617025700-31865-4-git-send-email-dennis.dalessandro@cornelisnetworks.com
Cc: stable@vger.kernel.org
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/cxgb4: check for ipv6 address properly while destroying listener

ipv6 bit is wrongly set by the below which causes fatal adapter lookup
engine errors for ipv4 connections while destroying a listener. Fix it to
properly check the local address for ipv6.

Fixes: 3408be145a5d ("RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server")
Link: https://lore.kernel.org/r/20210331135715.30072-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 'arm-fixes-5.11-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes again are devicetree fixes, but there are also
  five trivial build fixes for issues I found when test building with
  gcc-11 or when running 'make W=1', and some OMAP platform specific
  code fixups.

  Broadcom:
   - One revert for a Raspberry pi interrupt controller change that
     caused a regression.

  TI OMAP:
   - Remove unused duplicate sha2md5_fck clock node that can race with
     the OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks

   - Add aliases for omap4/5 mmc to put the slots back into the right
     order again

   - Fix typo for bionic voltage controllers that accidentally use mpu
     for all instances instead of mpu, core and iva

   - Fix random hangs for droid4 caused by missing fix from TI Android
     kernel tree to do a dummy smc call on cpuidle wakeup path

  NXP i.MX:
   - Fix a system failure on imx6qdl-phytec-pfla02 board when booting
     from SD, by adding missing vmmc supply for SD interfaces.

   - Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2
     definition.

  Marvell mvebu:
   - Fix storm interrupt on Turris Omnia

   - Enable hardware buffer management as it should be

  ... and build fixes for PXA, Freescale, Marvell, OMAP1 and Keystone"

* tag 'arm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
  ARM: dts: turris-omnia: fix hardware buffer management
  Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"
  ARM: mvebu: avoid clang -Wtautological-constant warning
  ARM: pxa: mainstone: avoid -Woverride-init warning
  ARM: omap1: fix building with clang IAS
  soc/fsl: qbman: fix conflicting alignment attributes
  ARM: keystone: fix integer overflow warning
  ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
  arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0
  ARM: OMAP4: PM: update ROM return address for OSWR and OFF
  ARM: OMAP4: Fix PMIC voltage domains for bionic
  ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
  ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
  Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"

Merge branch 'parisc-5.12-3' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:
"One link error fix found by the kernel test robot, one sparse warning
  fix, remove a duplicate declaration and some spelling fixes"

* 'parisc-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: math-emu: Few spelling fixes in the file fpu.h
  parisc: avoid a warning on u8 cast for cmpxchg on u8 pointers
  parisc: parisc-agp requires SBA IOMMU driver
  parisc: Remove duplicate struct task_struct declaration

Merge tag 'platform-drivers-x86-v5.12-3' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Hans de Goede:
"A single bugfix to fix spurious wakeups from suspend caused by recent
intel-hid driver changes"

* tag 'platform-drivers-x86-v5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel-hid: Fix spurious wakeups caused by tablet-mode events during suspend

Merge tag 'regulator-fix-v5.12-rc6' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"bd9571mwv regulator fixes for v5.12.

  A set of driver specific fixes here, the main one is a fix to not try
  to set unsupported voltages on this device. The other two patches
  clean up the error handling and eliminate the possibility that we
  could overflow the page when writing sysfs output (which AFAICT wasn't
  an issue but better to be sure)"

* tag 'regulator-fix-v5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: bd9571mwv: Convert device attribute to sysfs_emit()
  regulator: bd9571mwv: Fix regulator name printed on registration failure
  regulator: bd9571mwv: Fix AVS and DVFS voltage range

Merge tag 'asoc-fix-v5.12-rc6' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.12

A fairly small batch of driver specific fixes, mainly for various x86
systems with the biggest set being fixes to power down DSPs properly on
x86 SOF systems.

s390/setup: use memblock_free_late() to free old stack

Use memblock_free_late() to free the old machine check stack to the
buddy allocator instead of leaking it.

Fixes: b61b1595124a ("s390: add stack for machine check handler")
Cc: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

ALSA: aloop: Fix initialization of controls

Add a control to the card before copying the id so that the numid field
is initialized in the copy. Otherwise the numid field of active_id,
format_id, rate_id and channels_id will be the same (0) and
snd_ctl_notify() will not queue the events properly.

Signed-off-by: Jonas Holmberg <jonashg@axis.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407075428.2666787-1-jonashg@axis.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

LOOKUP_MOUNTPOINT: we are cleaning "jumped" flag too late

That (and traversals in case of umount .) should be done before
complete_walk(). Either a braino or mismerge damage on queue
reorders - either way, I should've spotted that much earlier.

Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
X-Paperbag: Brown
Fixes: 161aff1d93ab "LOOKUP_MOUNTPOINT: fold path_mountpointat() into path_lookupat()"
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'mvebu-fixes-5.12-1' of git://git./linux/kernel/git/gclement/mvebu into arm/fixes

mvebu fixes for 5.12 (part 1)

2 fixes on on turris-omnia (Armada 38x based:)
- Fix storm interrupt
- Enable hardware buffer management as it should be

Unbreak AHCI on all Marvell Armada 7k8k / CN913x platforms

* tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
  ARM: dts: turris-omnia: fix hardware buffer management
  Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"

Link: https://lore.kernel.org/r/87a6qgctit.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

platform/x86: intel-hid: Fix spurious wakeups caused by tablet-mode events during suspend

Some devices send (duplicate) tablet-mode events when moved around even
though the mode has not changed; and they do this even when suspended.

Change the tablet-mode event handling when priv->wakeup_mode is set to
update the switch state in case it changed and then return immediately
(without calling pm_wakeup_hard_event()) to avoid spurious wakeups.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212537
Fixes: 537b0dd4729e ("platform/x86: intel-hid: Add support for SW_TABLET_MODE")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Elia Devito <eliadevito@gmail.com>
Link: https://lore.kernel.org/r/20210404143831.25173-1-hdegoede@redhat.com

Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs

Pull fs fixes from Al Viro:
"Fairly old hostfs bug (in setups that are not used by anyone,
  apparently) + fix for this cycle regression: extra dput/mntput in
  LOOKUP_CACHED failure handling"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Make sure nd->path.mnt and nd->path.dentry are always valid pointers
  hostfs: fix memory handling in follow_link()

Make sure nd->path.mnt and nd->path.dentry are always valid pointers

Initialize them in set_nameidata() and make sure that terminate_walk() clears them
once the pointers become potentially invalid (i.e. we leave RCU mode or drop them
in non-RCU one). Currently we have "path_init() always initializes them and nobody
accesses them outside of path_init()/terminate_walk() segments", which is asking
for trouble.

With that change we would have nd->path.{mnt,dentry}
1) always valid - NULL or pointing to currently allocated objects.
2) non-NULL while we are successfully walking
3) NULL when we are not walking at all
4) contributing to refcounts whenever non-NULL outside of RCU mode.

Fixes: 6c6ec2b0a3e0 ("fs: add support for LOOKUP_CACHED")
Reported-by: syzbot+c88a7030da47945a3cc3@syzkaller.appspotmail.com
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

parisc: math-emu: Few spelling fixes in the file fpu.h

with some additional cleanups by Helge.

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Helge Deller <deller@gmx.de>

parisc: avoid a warning on u8 cast for cmpxchg on u8 pointers

commit b344d6a83d01 ("parisc: add support for cmpxchg on u8 pointers")
can generate a sparse warning ("cast truncates bits from constant
value"), which has been reported several times [1] [2] [3].

The original code worked as expected, but anyway, let silence such
sparse warning as what others did [4].

[1] https://lore.kernel.org/r/202104061220.nRMBwCXw-lkp@intel.com
[2] https://lore.kernel.org/r/202012291914.T5Agcn99-lkp@intel.com
[3] https://lore.kernel.org/r/202008210829.KVwn7Xeh%25lkp@intel.com
[4] https://lore.kernel.org/r/20210315131512.133720-2-jacopo+renesas@jmondi.org
Cc: Liam Beguin <liambeguin@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>

ALSA: hda/conexant: Apply quirk for another HP ZBook G5 model

There is another HP ZBook G5 model with the PCI SSID 103c:844f that
requires the same quirk for controlling the mute LED. Add the
corresponding entry to the quirk table.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212407
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210401171314.667-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

parisc: parisc-agp requires SBA IOMMU driver

Add a dependency to the SBA IOMMU driver to avoid:
ERROR: modpost: "sba_list" [drivers/char/agp/parisc-agp.ko] undefined!

Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>

parisc: Remove duplicate struct task_struct declaration

struct task_struct is declared twice. One has been declared
at 154th line. Remove the duplicate.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Merge branch 'for-5.12-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fixes from Tejun Heo:
"Two workqueue fixes.

  One is around debugobj and poses no risk. The other is to prevent the
  stall watchdog from firing spuriously in certain conditions. Not as
  trivial as debugobj change but is still fairly low risk"

* 'for-5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue/watchdog: Make unbound workqueues aware of touch_softlockup_watchdog() 84;0;0c84;0;0c There are two workqueue-specific watchdog timestamps:
  workqueue: Move the position of debug_work_activate() in __queue_work()

s390/irq: fix reading of ext_params2 field from lowcore

The contents of the ext_params2 field of the lowcore should just be
copied to the pt_regs structure, not dereferenced.

Fixes crashes / program check loops like this:

Krnl PSW : 0404c00180000000 00000000d6d02b3c (do_ext_irq+0x74/0x170)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000000 80000000000b974e 00000000d71abee0 00000000d71abee0
           0000000080030000 000000000000000f 0000000000000000 0000000000000000
           0000000000000001 00000380000bf918 00000000d73ef780 00000380000bf518
           0000000080348000 00000000d6d13350 00000000d6d02b1e 00000380000bf428
Krnl Code: 00000000d6d02b2e: 58100080            l       %r1,128
           00000000d6d02b32: 5010b0a4            st      %r1,164(%r11)
          #00000000d6d02b36: e31001b80104        lg      %r1,4536
          >00000000d6d02b3c: e31010000004        lg      %r1,0(%r1)
           00000000d6d02b42: e310b0a80024        stg     %r1,168(%r11)
           00000000d6d02b48: c01000242270        larl    %r1,00000000d7187028
           00000000d6d02b4e: d5071000b010        clc     0(8,%r1),16(%r11)
           00000000d6d02b54: a784001b            brc     8,00000000d6d02b8a
Call Trace:
[<00000000d6d02b3c>] do_ext_irq+0x74/0x170
[<00000000d6d0ea5c>] ext_int_handler+0xc4/0xf4
[<00000000d621d266>] die+0x106/0x188
[<00000000d62305b8>] do_no_context+0xc8/0x100
[<00000000d6d02790>] __do_pgm_check+0xe0/0x1f0
[<00000000d6d0e950>] pgm_check_handler+0x118/0x160
[<00000000d6d02b3c>] do_ext_irq+0x74/0x170
[<00000000d6d0ea5c>] ext_int_handler+0xc4/0xf4
[<00000000d621d266>] die+0x106/0x188
[<00000000d62305b8>] do_no_context+0xc8/0x100
[<00000000d6d02790>] __do_pgm_check+0xe0/0x1f0
[<00000000d6d0e950>] pgm_check_handler+0x118/0x160
[<00000000d6d02b3c>] do_ext_irq+0x74/0x170
[<00000000d6d0ea5c>] ext_int_handler+0xc4/0xf4
[<0000000000000000>] 0x0
[<00000000d6d0e57a>] default_idle_call+0x42/0x110
[<00000000d629856e>] do_idle+0xce/0x160
[<00000000d62987be>] cpu_startup_entry+0x36/0x40
[<00000000d621f2f2>] smp_start_secondary+0x82/0x88

Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 56e62a737028 ("s390: convert to generic entry")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/unwind: add machine check handler stack

Fixes: b61b1595124a ("s390: add stack for machine check handler")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/cpcmd: fix inline assembly register clobbering

Register variables initialized using arithmetic. That leads to
kasan instrumentaton code corrupting the registers contents.
Follow GCC guidlines and use temporary variables for assigning
init values to register variables.

Fixes: 94c12cc7d196 ("[S390] Inline assembly cleanup.")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://gcc.gnu.org/onlinedocs/gcc-10.2.0/gcc/Local-Register-Variables.html
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Linux 5.12-rc6

firewire: nosy: Fix a use-after-free bug in nosy_ioctl()

For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:

1. Open nosy device for the first time and call ioctl with command
    NOSY_IOC_START, then a new client A will be malloced and added to
    doubly linked list.
2. Open nosy device for the second time and call ioctl with command
    NOSY_IOC_START, then a new client B will be malloced and added to
    doubly linked list.
3. Call ioctl with command NOSY_IOC_START for client A, then client A
    will be readded to the doubly linked list. Now the doubly linked
    list is messed up.
4. Close the first nosy device and nosy_release will be called. In
    nosy_release, client A will be unlinked and freed.
5. Close the second nosy device, and client A will be referenced,
    resulting in UAF.

The root cause of this bug is that the element in the doubly linked list
is reentered into the list.

Fix this bug by adding a check before inserting a client.  If a client
is already in the linked list, don't insert it.

The following KASAN report reveals it:

   BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
   Write of size 8 at addr ffff888102ad7360 by task poc
   CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
   Call Trace:
     nosy_release+0x1ea/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Allocated by task 337:
     nosy_open+0x154/0x4d0
     misc_open+0x2ec/0x410
     chrdev_open+0x20d/0x5a0
     do_dentry_open+0x40f/0xe80
     path_openat+0x1cf9/0x37b0
     do_filp_open+0x16d/0x390
     do_sys_openat2+0x11d/0x360
     __x64_sys_open+0xfd/0x1a0
     do_syscall_64+0x33/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Freed by task 337:
     kfree+0x8f/0x210
     nosy_release+0x158/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128
   The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380)

[ Modified to use 'list_empty()' inside proper lock  - Linus ]

Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/
Reported-and-tested-by: 马哲宇 (Zheyu Ma) <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

workqueue/watchdog: Make unbound workqueues aware of touch_softlockup_watchdog()
84;0;0c84;0;0c
There are two workqueue-specific watchdog timestamps:

    + @wq_watchdog_touched_cpu (per-CPU) updated by
      touch_softlockup_watchdog()

    + @wq_watchdog_touched (global) updated by
      touch_all_softlockup_watchdogs()

watchdog_timer_fn() checks only the global @wq_watchdog_touched for
unbound workqueues. As a result, unbound workqueues are not aware
of touch_softlockup_watchdog(). The watchdog might report a stall
even when the unbound workqueues are blocked by a known slow code.

Solution:
touch_softlockup_watchdog() must touch also the global @wq_watchdog_touched
timestamp.

The global timestamp can no longer be used for bound workqueues because
it is now updated from all CPUs. Instead, bound workqueues have to check
only @wq_watchdog_touched_cpu and these timestamps have to be updated for
all CPUs in touch_all_softlockup_watchdogs().

Beware:
The change might cause the opposite problem. An unbound workqueue
might get blocked on CPU A because of a real softlockup. The workqueue
watchdog would miss it when the timestamp got touched on CPU B.

It is acceptable because softlockups are detected by softlockup
watchdog. The workqueue watchdog is there to detect stalls where
a work never finishes, for example, because of dependencies of works
queued into the same workqueue.

V3:
- Modify the commit message clearly according to Petr's suggestion.

Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

workqueue: Move the position of debug_work_activate() in __queue_work()

The debug_work_activate() is called on the premise that
the work can be inserted, because if wq be in WQ_DRAINING
status, insert work may be failed.

Fixes: e41e704bc4f4 ("workqueue: improve destroy_workqueue() debuggability")
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Merge tag 'for-linus' of git://github.com/openrisc/linux

Pull OpenRISC fix from Stafford Horne:
"Fix duplicate header include in Litex SOC driver"

* tag 'for-linus' of git://github.com/openrisc/linux:
soc: litex: Remove duplicated header file inclusion

Merge tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block

POull io_uring fix from Jens Axboe:
"Just fixing a silly braino in a previous patch, where we'd end up
  failing to compile if CONFIG_BLOCK isn't enabled.

  Not that a lot of people do that, but kernel bot spotted it and it's
  probably prudent to just flush this out now before -rc6.

  Sorry about that, none of my test compile configs have !CONFIG_BLOCK"

* tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block:
  io_uring: fix !CONFIG_BLOCK compilation failure

soc: litex: Remove duplicated header file inclusion

The header file <linux/errno.h> is already included above and can be
removed here.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

Merge tag 'gfs2-v5.12-rc2-fixes2' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fixes from Andreas Gruenbacher:
"Two more gfs2 fixes"

* tag 'gfs2-v5.12-rc2-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: report "already frozen/thawed" errors
gfs2: Flag a withdraw if init_threads() fails

Merge tag 'riscv-for-linus-5.12-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes for 5.12:

   - fix a stack tracing regression related to "const register asm"
     variables, which have unexpected behavior.

   - ensure the value to be written by put_user() is evaluated before
     enabling access to userspace memory..

   - align the exception vector table correctly, so we don't rely on the
     firmware's handling of unaligned accesses.

   - build fix to make NUMA depend on MMU, which triggered on some
     randconfigs"

* tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Make NUMA depend on MMU
  riscv: remove unneeded semicolon
  riscv,entry: fix misaligned base for excp_vect_table
  riscv: evaluate put_user() arg before enabling user access
  riscv: Drop const annotation for sp

Merge tag 'powerpc-5.12-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Fix a bug on pseries where spurious wakeups from H_PROD would prevent
  partition migration from succeeding.

  Fix oopses seen in pcpu_alloc(), caused by parallel faults of the
  percpu mapping causing us to corrupt the protection key used for the
  mapping, and cause a fatal key fault.

  Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, and Nathan Lynch"

* tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECT
  powerpc/pseries/mobility: handle premature return from H_JOIN
  powerpc/pseries/mobility: use struct for shared state

Merge tag 'hyperv-fixes-signed-20210402' of git://git./linux/kernel/git/hyperv/linux

Pull Hyper-V fixes from Wei Liu:
"One fix from Lu Yunlong for a double free in hvfb_probe"

* tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
video: hyperv_fb: Fix a double free in hvfb_probe

Merge tag 'driver-core-5.12-rc6' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
"Here is a single driver core fix for a reported problem with differed
  probing. It has been in linux-next for a while with no reported
  problems"

* tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: clear deferred probe reason on probe retry

Merge tag 'char-misc-5.12-rc6' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are a few small driver char/misc changes for 5.12-rc6.

  Nothing major here, a few fixes for reported issues:

   - interconnect fixes for problems found

   - fbcon syzbot-found fix

   - extcon fixes

   - firmware stratix10 bugfix

   - MAINTAINERS file update.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  drivers: video: fbcon: fix NULL dereference in fbcon_cursor()
  mei: allow map and unmap of client dma buffer only for disconnected client
  MAINTAINERS: Add linux-phy list and patchwork
  interconnect: Fix kerneldoc warning
  firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
  extcon: Fix error handling in extcon_dev_register
  extcon: Add stubs for extcon_register_notifier_all() functions
  interconnect: core: fix error return code of icc_link_destroy()
  interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes

Merge tag 'staging-5.12-rc6' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
"Here are two rtl8192e staging driver fixes for reported problems.

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8192e: Change state information from u16 to u8
  staging: rtl8192e: Fix incorrect source in memcpy()

Merge tag 'tty-5.12-rc6' of git://git./linux/kernel/git/gregkh/tty

Pull serial driver fix from Greg KH:
"Here is a single serial driver fix for 5.12-rc6. Is is a revert of a
  change that showed up in 5.9 that has been reported to cause problems.

  It has been in linux-next for a while with no reported issues"

* tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  soc: qcom-geni-se: Cleanup the code to remove proxy votes

Merge tag 'usb-5.12-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are a few small USB driver fixes for 5.12-rc6 to resolve reported
  problems.

  They include:

   - a number of cdc-acm fixes for reported problems. It seems more
     people are using this driver lately...

   - dwc3 driver fixes for reported problems, and fixes for the fixes :)

   - dwc2 driver fixes for reported issues.

   - musb driver fix.

   - new USB quirk additions.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (23 commits)
  usb: dwc2: Prevent core suspend when port connection flag is 0
  usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.
  usb: musb: Fix suspend with devices connected for a64
  usb: xhci-mtk: fix broken streams issue on 0.96 xHCI
  usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable
  usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()
  USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem
  USB: cdc-acm: do not log successful probe on later errors
  USB: cdc-acm: always claim data interface
  USB: cdc-acm: use negation for NULL checks
  USB: cdc-acm: clean up probe error labels
  USB: cdc-acm: drop redundant driver-data reset
  USB: cdc-acm: drop redundant driver-data assignment
  USB: cdc-acm: fix use-after-free after probe failure
  USB: cdc-acm: fix double free on probe failure
  USB: cdc-acm: downgrade message to debug
  USB: cdc-acm: untangle a circular dependency between callback and softint
  cdc-acm: fix BREAK rx code path adding necessary calls
  usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference
  usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield
  ...

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
"A single fix to iscsi for a rare race condition which can cause a
kernel panic"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix race condition between login and sync thread

io_uring: fix !CONFIG_BLOCK compilation failure

kernel test robot correctly pinpoints a compilation failure if
CONFIG_BLOCK isn't set:

fs/io_uring.c: In function '__io_complete_rw':
>> fs/io_uring.c:2509:48: error: implicit declaration of function 'io_rw_should_reissue'; did you mean 'io_rw_reissue'? [-Werror=implicit-function-declaration]
    2509 |  if ((res == -EAGAIN || res == -EOPNOTSUPP) && io_rw_should_reissue(req)) {
         |                                                ^~~~~~~~~~~~~~~~~~~~
         |                                                io_rw_reissue
    cc1: some warnings being treated as errors

Ensure that we have a stub declaration of io_rw_should_reissue() for
!CONFIG_BLOCK.

Fixes: 230d50d448ac ("io_uring: move reissue into regular IO path")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Remove comment that never came to fruition in 22 years of development
   (Christoph)

- Remove unused request flag (Christoph)

- Fix for null_blk fake timeout handling (Damien)

- Fix for IOCB_NOWAIT being ignored for O_DIRECT on raw bdevs (Pavel)

- Error propagation fix for multiple split bios (Yufen)

* tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
  block: remove the unused RQF_ALLOCED flag
  block: update a few comments in uapi/linux/blkpg.h
  block: don't ignore REQ_NOWAIT for direct IO
  null_blk: fix command timeout completion handling
  block: only update parent bi_status when bio fail

Merge tag 'io_uring-5.12-2021-04-02' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"Nothing really major in here, and finally nothing really related to
  signals. A few minor fixups related to the threading changes, and some
  general fixes, that's it.

  There's the pending gdb-get-confused-about-arch, but that's more of a
  cosmetic issue, nothing that hinder use of it. And given that other
  archs will likely be affected by that oddity too, better to postpone
  any changes there until 5.13 imho"

* tag 'io_uring-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
  io_uring: move reissue into regular IO path
  io_uring: fix EIOCBQUEUED iter revert
  io_uring/io-wq: protect against sprintf overflow
  io_uring: don't mark S_ISBLK async work as unbounded
  io_uring: drop sqd lock before handling signals for SQPOLL
  io_uring: handle setup-failed ctx in kill_timeouts
  io_uring: always go for cancellation spin on exec

Merge tag 'acpi-5.12-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI tables management issue, an issue related to the
  ACPI enumeration of devices and CPU wakeup in the ACPI processor
  driver.

  Specifics:

   - Ensure that the memory occupied by ACPI tables on x86 will always
     be reserved to prevent it from being allocated for other purposes
     which was possible in some cases (Rafael Wysocki).

   - Fix the ACPI device enumeration code to prevent it from attempting
     to evaluate the _STA control method for devices with unmet
     dependencies which is likely to fail (Hans de Goede).

   - Fix the handling of CPU0 wakeup in the ACPI processor driver to
     prevent CPU0 online failures from occurring (Vitaly Kuznetsov)"

* tag 'acpi-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()
  ACPI: scan: Fix _STA getting called on devices with unmet dependencies
  ACPI: tables: x86: Reserve memory occupied by ACPI tables

Merge tag 'pm-5.12-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These fix a race condition and an ordering issue related to using
  device links in the runtime PM framework and two kerneldoc comments in
  cpufreq.

  Specifics:

   - Fix race condition related to the handling of supplier devices
     during consumer device probe and fix the order of decrementation of
     two related reference counters in the runtime PM core code handling
     supplier devices (Adrian Hunter).

   - Fix kerneldoc comments in cpufreq that have not been updated along
     with the functions documented by them (Geert Uytterhoeven)"

* tag 'pm-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: runtime: Fix race getting/putting suppliers at probe
  PM: runtime: Fix ordering in pm_runtime_get_suppliers()
  cpufreq: Fix scaling_{available,boost}_frequencies_show() comments

ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin

Use the `marvell,reg-init` DT property to configure the LED[2]/INTn pin
of the Marvell 88E1514 ethernet PHY on Turris Omnia into interrupt mode.

Without this the pin is by default in LED[2] mode, and the Marvell PHY
driver configures LED[2] into "On - Link, Blink - Activity" mode.

This fixes the issue where the pca9538 GPIO/interrupt controller (which
can't mask interrupts in HW) received too many interrupts and after a
time started ignoring the interrupt with error message:
IRQ 71: nobody cared

There is a work in progress to have the Marvell PHY driver support
parsing PHY LED nodes from OF and registering the LEDs as Linux LED
class devices. Once this is done the PHY driver can also automatically
set the pin into INTn mode if it does not find LED[2] in OF.

Until then, though, we fix this via `marvell,reg-init` DT property.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: <stable@vger.kernel.org>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

ARM: dts: turris-omnia: fix hardware buffer management

Hardware buffer management has never worked on the Turris Omnia, as the
required MBus window hadn't been reserved. Fix thusly.

Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management")

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"

The driver part of this support was not merged which leads to break
AHCI on all Marvell Armada 7k8k / CN913x platforms as it was reported
by Marcin Wojtas.

So for now let's remove it in order to fix the issue waiting for the
driver part really be merged.

This reverts commit 53e950d597e3578da84238b86424bfcc9e101d87.
Fixes: 53e950d597e3 ("arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts")

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

block: remove the unused RQF_ALLOCED flag

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: update a few comments in uapi/linux/blkpg.h

The big top of the file comment talk about grand plans that never
happened, so remove them to not confuse the readers. Also mark the
devname and volname fields as ignored as they were never used by the
kernel.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'trace-v5.12-rc5-2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
"Fix stack trace entry size to stop showing garbage

  The macro that creates both the structure and the format displayed to
  user space for the stack trace event was changed a while ago to fix
  the parsing by user space tooling. But this change also modified the
  structure used to store the stack trace event. It changed the caller
  array field from [0] to [8].

  Even though the size in the ring buffer is dynamic and can be
  something other than 8 (user space knows how to handle this), the 8
  extra words was not accounted for when reserving the event on the ring
  buffer, and added 8 more entries, due to the calculation of
  "sizeof(*entry) + nr_entries * sizeof(long)", as the sizeof(*entry)
  now contains 8 entries.

  The size of the caller field needs to be subtracted from the size of
  the entry to create the correct allocation size"

* tag 'trace-v5.12-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix stack trace event size

io_uring: move reissue into regular IO path

It's non-obvious how retry is done for block backed files, when it happens
off the kiocb done path. It also makes it tricky to deal with the iov_iter
handling.

Just mark the req as needing a reissue, and handling it from the
submission path instead. This makes it directly obvious that we're not
re-importing the iovec from userspace past the submit point, and it means
that we can just reuse our usual -EAGAIN retry path from the read/write
handling.

At some point in the future, we'll gain the ability to always reliably
return -EAGAIN through the stack. A previous attempt on the block side
didn't pan out and got reverted, hence the need to check for this
information out-of-band right now.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

ASoC: fsl_esai: Fix TDM slot setup for I2S mode

When using the driver in I2S TDM mode, the fsl_esai_startup()
function rewrites the number of slots previously set by the
fsl_esai_set_dai_tdm_slot() function to 2.
To fix this, let's use the saved slot count value or, if TDM
is not used and the number of slots is not set, the driver will use
the default value (2), which is set by fsl_esai_probe().

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210402081405.9892-1-shc_work@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branches 'acpi-tables' and 'acpi-scan'

* acpi-tables:
ACPI: tables: x86: Reserve memory occupied by ACPI tables

* acpi-scan:
ACPI: scan: Fix _STA getting called on devices with unmet dependencies

Merge branch 'pm-cpufreq'

* pm-cpufreq:
cpufreq: Fix scaling_{available,boost}_frequencies_show() comments

block: don't ignore REQ_NOWAIT for direct IO

If IOCB_NOWAIT is set on submission, then that needs to get propagated to
REQ_NOWAIT on the block side. Otherwise we completely lose this
information, and any issuer of IOCB_NOWAIT IO will potentially end up
blocking on eg request allocation on the storage side.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

file: fix close_range() for unshare+cloexec

syzbot reported a bug when putting the last reference to a tasks file
descriptor table. Debugging this showed we didn't recalculate the
current maximum fd number for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC
after we unshared the file descriptors table. So max_fd could exceed the
current fdtable maximum causing us to set excessive bits. As a concrete
example, let's say the user requested everything from fd 4 to ~0UL to be
closed and their current fdtable size is 256 with their highest open fd
being 4. With CLOSE_RANGE_UNSHARE the caller will end up with a new
fdtable which has room for 64 file descriptors since that is the lowest
fdtable size we accept. But now max_fd will still point to 255 and needs
to be adjusted. Fix this by retrieving the correct maximum fd value in
__range_cloexec().

Reported-by: syzbot+283ce5a46486d6acdbaf@syzkaller.appspotmail.com
Fixes: 582f1fb6b721 ("fs, close_range: add flag CLOSE_RANGE_CLOEXEC")
Fixes: fec8a6a69103 ("close_range: unshare all fds for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

riscv: Make NUMA depend on MMU

NUMA is useless when NOMMU, and it leads some build error,
make it depend on MMU.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: remove unneeded semicolon

Eliminate the following coccicheck warning:
./arch/riscv/mm/kasan_init.c:219:2-3: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv,entry: fix misaligned base for excp_vect_table

In RV64, the size of each entry in excp_vect_table is 8 bytes. If the
base of the table is not 8-byte aligned, loading an entry in the table
will raise a misaligned exception. Although such exception will be
handled by opensbi/bbl, this still causes performance degradation.

Signed-off-by: Zihao Yu <yuzihao@ict.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: evaluate put_user() arg before enabling user access

The <asm/uaccess.h> header has a problem with put_user(a, ptr) if
the 'a' is not a simple variable, such as a function. This can lead
to the compiler producing code as so:

1: enable_user_access()
2: evaluate 'a' into register 'r'
3: put 'r' to 'ptr'
4: disable_user_acess()

The issue is that 'a' is now being evaluated with the user memory
protections disabled. So we try and force the evaulation by assigning
'x' to __val at the start, and hoping the compiler barriers in
enable_user_access() do the job of ordering step 2 before step 1.

This has shown up in a bug where 'a' sleeps and thus schedules out
and loses the SR_SUM flag. This isn't sufficient to fully fix, but
should reduce the window of opportunity. The first instance of this
we found is in scheudle_tail() where the code does:

$ less -N kernel/sched/core.c

4263 if (current->set_child_tid)
4264 put_user(task_pid_vnr(current), current->set_child_tid);

Here, the task_pid_vnr(current) is called within the block that has
enabled the user memory access. This can be made worse with KASAN
which makes task_pid_vnr() a rather large call with plenty of
opportunity to sleep.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reported-by: syzbot+e74b94fe601ab9552d69@syzkaller.appspotmail.com
Suggested-by: Arnd Bergman <arnd@arndb.de>
--
Changes since v1:
- fixed formatting and updated the patch description with more info

Changes since v2:
- fixed commenting on __put_user() (schwab@linux-m68k.org)

Change since v3:
- fixed RFC in patch title. Should be ready to merge.

Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: Drop const annotation for sp

The const annotation should not be used for 'sp', or it will
become read only and lead to bad stack output.

Fixes: dec822771b01 ("riscv: stacktrace: Move register keyword to beginning of declaration")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Merge tag 'lto-v5.12-rc6' of git://git./linux/kernel/git/kees/linux

Pull LTO fix from Kees Cook:
"It seems that there is a bug in ld.bfd when doing module section
  merging.

  As explicit merging is only needed for LTO, the work-around is to only
  do it under LTO, leaving the original section layout choices alone
  under normal builds:

   - Only perform explicit module section merges under LTO (Sean
     Christopherson)"

* tag 'lto-v5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kbuild: lto: Merge module sections if and only if CONFIG_LTO_CLANG is enabled

kbuild: lto: Merge module sections if and only if CONFIG_LTO_CLANG is enabled

Merge module sections only when using Clang LTO. With ld.bfd, merging
sections does not appear to update the symbol tables for the module,
e.g. 'readelf -s' shows the value that a symbol would have had, if
sections were not merged. ld.lld does not show this problem.

The stale symbol table breaks gdb's function disassembler, and presumably
other things, e.g.

gdb -batch -ex "file arch/x86/kvm/kvm.ko" -ex "disassemble kvm_init"

reads the wrong bytes and dumps garbage.

Fixes: dd2776222abb ("kbuild: lto: merge module sections")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210322234438.502582-1-seanjc@google.com

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"It's a bit larger than I (and probably you) would like by the time we
  get to -rc6, but perhaps not entirely unexpected since the changes in
  the last merge window were larger than usual.

  x86:
   - Fixes for missing TLB flushes with TDP MMU

   - Fixes for race conditions in nested SVM

   - Fixes for lockdep splat with Xen emulation

   - Fix for kvmclock underflow

   - Fix srcdir != builddir builds

   - Other small cleanups

  ARM:
   - Fix GICv3 MMIO compatibility probing

   - Prevent guests from using the ARMv8.4 self-hosted tracing
     extension"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  selftests: kvm: Check that TSC page value is small after KVM_SET_CLOCK(0)
  KVM: x86: Prevent 'hv_clock->system_time' from going negative in kvm_guest_time_update()
  KVM: x86: disable interrupts while pvclock_gtod_sync_lock is taken
  KVM: x86: reduce pvclock_gtod_sync_lock critical sections
  KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit
  KVM: SVM: load control fields from VMCB12 before checking them
  KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
  KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
  KVM: x86/mmu: Ensure TLBs are flushed when yielding during GFN range zap
  KVM: make: Fix out-of-source module builds
  selftests: kvm: make hardware_disable_test less verbose
  KVM: x86/vPMU: Forbid writing to MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE
  KVM: x86: remove unused declaration of kvm_write_tsc()
  KVM: clean up the unused argument
  tools/kvm_stat: Add restart delay
  KVM: arm64: Fix CPU interface MMIO compatibility detection
  KVM: arm64: Disable guest access to trace filter controls
  KVM: arm64: Hide system instruction access to Trace registers

Merge tag 'drm-fixes-2021-04-02' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Things have settled down in time for Easter, a random smattering of
  small fixes across a few drivers.

  I'm guessing though there might be some i915 and misc fixes out there
  I haven't gotten yet, but since today is a public holiday here, I'm
  sending this early so I can have the day off, I'll see if more
  requests come in and decide what to do with them later.

  amdgpu:
   - Polaris idle power fix
   - VM fix
   - Vangogh S3 fix
   - Fixes for non-4K page sizes

  amdkfd:
   - dqm fence memory corruption fix

  tegra:
   - lockdep warning fix
   - runtine PM reference fix
   - display controller fix
   - PLL Fix

  imx:
   - memory leak in error path fix
   - LDB driver channel registration fix
   - oob array warning in LDB driver

  exynos
   - unused header file removal"

* tag 'drm-fixes-2021-04-02' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: check alignment on CPU page for bo map
  drm/amdgpu: Set a suitable dev_info.gart_page_size
  drm/amdgpu/vangogh: don't check for dpm in is_dpm_running when in suspend
  drm/amdkfd: dqm fence memory corruption
  drm/tegra: sor: Grab runtime PM reference across reset
  drm/tegra: dc: Restore coupling of display controllers
  gpu: host1x: Use different lock classes for each client
  drm/tegra: dc: Don't set PLL clock to 0Hz
  drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings()
  drm/amd/pm: no need to force MCLK to highest when no display connected
  drm/exynos/decon5433: Remove the unused include statements
  drm/imx: imx-ldb: fix out of bounds array access warning
  drm/imx: imx-ldb: Register LDB channel1 when it is the only channel to be used
  drm/imx: fix memory leak when fails to init

Merge tag 'imx-drm-fixes-2021-04-01' of git://git.pengutronix.de/git/pza/linux into drm-fixes

drm/imx: imx-drm-core and imx-ldb fixes

Fix a memory leak in an error path during DRM device initialization,
fix the LDB driver to register channel 1 even if channel 0 is unused,
and fix an out of bounds array access warning in the LDB driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401092235.GA13586@pengutronix.de

Merge tag 'drm/tegra/for-5.12-rc6' of ssh://git.freedesktop.org/git/tegra/linux into drm-fixes

drm/tegra: Fixes for v5.12-rc6

This contains a couple of fixes for various issues such as lockdep
warnings, runtime PM references, coupled display controllers and
misconfigured PLLs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401163352.3348296-1-thierry.reding@gmail.com

RDMA/rtrs-clt: Close rtrs client conn before destroying rtrs clt session files

KASAN detected the following BUG:

  BUG: KASAN: use-after-free in rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
  Read of size 8 at addr ffff88bf2fb4adc0 by task swapper/0/0

  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O      5.4.84-pserver #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10
  Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00       09/04/2012
  Call Trace:
   <IRQ>
   dump_stack+0x96/0xe0
   print_address_description.constprop.4+0x1f/0x300
   ? irq_work_claim+0x2e/0x50
   __kasan_report.cold.8+0x78/0x92
   ? rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
   kasan_report+0x10/0x20
   rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
   rtrs_clt_rdma_done+0xb1/0x760 [rtrs_client]
   ? lockdep_hardirqs_on+0x1a8/0x290
   ? process_io_rsp+0xb0/0xb0 [rtrs_client]
   ? mlx4_ib_destroy_cq+0x100/0x100 [mlx4_ib]
   ? add_interrupt_randomness+0x1a2/0x340
   __ib_process_cq+0x97/0x100 [ib_core]
   ib_poll_handler+0x41/0xb0 [ib_core]
   irq_poll_softirq+0xe0/0x260
   __do_softirq+0x127/0x672
   irq_exit+0xd1/0xe0
   do_IRQ+0xa3/0x1d0
   common_interrupt+0xf/0xf
   </IRQ>
  RIP: 0010:cpuidle_enter_state+0xea/0x780
  Code: 31 ff e8 99 48 47 ff 80 7c 24 08 00 74 12 9c 58 f6 c4 02 0f 85 53 05 00 00 31 ff e8 b0 6f 53 ff e8 ab 4f 5e ff fb 8b 44 24 04 <85> c0 0f 89 f3 01 00 00 48 8d 7b 14 e8 65 1e 77 ff c7 43 14 00 00
  RSP: 0018:ffffffffab007d58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffca
  RAX: 0000000000000002 RBX: ffff88b803d69800 RCX: ffffffffa91a8298
  RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffffffffab021414
  RBP: ffffffffab6329e0 R08: 0000000000000002 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
  R13: 000000bf39d82466 R14: ffffffffab632aa0 R15: ffffffffab632ae0
   ? lockdep_hardirqs_on+0x1a8/0x290
   ? cpuidle_enter_state+0xe5/0x780
   cpuidle_enter+0x3c/0x60
   do_idle+0x2fb/0x390
   ? arch_cpu_idle_exit+0x40/0x40
   ? schedule+0x94/0x120
   cpu_startup_entry+0x19/0x1b
   start_kernel+0x5da/0x61b
   ? thread_stack_cache_init+0x6/0x6
   ? load_ucode_amd_bsp+0x6f/0xc4
   ? init_amd_microcode+0xa6/0xa6
   ? x86_family+0x5/0x20
   ? load_ucode_bsp+0x182/0x1fd
   secondary_startup_64+0xa4/0xb0

  Allocated by task 5730:
   save_stack+0x19/0x80
   __kasan_kmalloc.constprop.9+0xc1/0xd0
   kmem_cache_alloc_trace+0x15b/0x350
   alloc_sess+0xf4/0x570 [rtrs_client]
   rtrs_clt_open+0x3b4/0x780 [rtrs_client]
   find_and_get_or_create_sess+0x649/0x9d0 [rnbd_client]
   rnbd_clt_map_device+0xd7/0xf50 [rnbd_client]
   rnbd_clt_map_device_store+0x4ee/0x970 [rnbd_client]
   kernfs_fop_write+0x141/0x240
   vfs_write+0xf3/0x280
   ksys_write+0xba/0x150
   do_syscall_64+0x68/0x270
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

  Freed by task 5822:
   save_stack+0x19/0x80
   __kasan_slab_free+0x125/0x170
   kfree+0xe7/0x3f0
   kobject_put+0xd3/0x240
   rtrs_clt_destroy_sess_files+0x3f/0x60 [rtrs_client]
   rtrs_clt_close+0x3c/0x80 [rtrs_client]
   close_rtrs+0x45/0x80 [rnbd_client]
   rnbd_client_exit+0x10f/0x2bd [rnbd_client]
   __x64_sys_delete_module+0x27b/0x340
   do_syscall_64+0x68/0x270
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

When rtrs_clt_close is triggered, it iterates over all the present
rtrs_clt_sess and triggers close on them. However, the call to
rtrs_clt_destroy_sess_files is done before the rtrs_clt_close_conns. This
is incorrect since during the initialization phase we allocate
rtrs_clt_sess first, and then we go ahead and create rtrs_clt_con for it.

If we free the rtrs_clt_sess structure before closing the rtrs_clt_con, it
may so happen that an inflight IO completion would trigger the function
rtrs_clt_rdma_done, which would lead to the above UAF case.

Hence close the rtrs_clt_con connections first, and then trigger the
destruction of session files.

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210325153308.1214057-12-gi-oh.kim@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

tracing: Fix stack trace event size

Commit cbc3b92ce037 fixed an issue to modify the macros of the stack trace
event so that user space could parse it properly. Originally the stack
trace format to user space showed that the called stack was a dynamic
array. But it is not actually a dynamic array, in the way that other
dynamic event arrays worked, and this broke user space parsing for it. The
update was to make the array look to have 8 entries in it. Helper
functions were added to make it parse it correctly, as the stack was
dynamic, but was determined by the size of the event stored.

Although this fixed user space on how it read the event, it changed the
internal structure used for the stack trace event. It changed the array
size from [0] to [8] (added 8 entries). This increased the size of the
stack trace event by 8 words. The size reserved on the ring buffer was the
size of the stack trace event plus the number of stack entries found in
the stack trace. That commit caused the amount to be 8 more than what was
needed because it did not expect the caller field to have any size. This
produced 8 entries of garbage (and reading random data) from the stack
trace event:

<idle>-0 [002] d... 1976396.837549: <stack trace>
=> trace_event_raw_event_sched_switch
=> __traceiter_sched_switch
=> __schedule
=> schedule_idle
=> do_idle
=> cpu_startup_entry
=> secondary_startup_64_no_verify
=> 0xc8c5e150ffff93de
=> 0xffff93de
=> 0
=> 0
=> 0xc8c5e17800000000
=> 0x1f30affff93de
=> 0x00000004
=> 0x200000000

Instead, subtract the size of the caller field from the size of the event
to make sure that only the amount needed to store the stack trace is
reserved.

Link: https://lore.kernel.org/lkml/your-ad-here.call-01617191565-ext-9692@work.hours/
Cc: stable@vger.kernel.org
Fixes: cbc3b92ce037 ("tracing: Set kernel_stack's caller size properly")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Merge tag 'sound-5.12-rc6' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Things seem calming down, only usual device-specific fixes for
  HD-audio and USB-audio at this time"

* tag 'sound-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: fix mute/micmute LEDs for HP 640 G8
  ALSA: hda: Add missing sanity checks in PM prepare/complete callbacks
  ALSA: hda: Re-add dropped snd_poewr_change_state() calls
  ALSA: usb-audio: Apply sample rate quirk to Logitech Connect
  ALSA: hda/realtek: call alc_update_headset_mode() in hp_automute_hook
  ALSA: hda/realtek: fix a determine_headset_type issue for a Dell AIO

Merge tag 'tomoyo-pr-20210401' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1

Pull tomory fix from Tetsuo Handa:
"An update on 'tomoyo: recognize kernel threads correctly' from Jens
Axboe to not special case PF_IO_WORKER for PF_KTHREAD"

* tag 'tomoyo-pr-20210401' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
tomoyo: don't special case PF_IO_WORKER for PF_KTHREAD

Merge tag 'xarray-5.12' of git://git.infradead.org/users/willy/xarray

Pull XArray fixes from Matthew Wilcox:
"My apologies for the lateness of this. I had a bug reported in the
  test suite, and when I started working on it, I realised I had two
  fixes sitting in the xarray tree since last November. Anyway,
  everything here is fixes, apart from adding xa_limit_16b. The test
  suite passes.

  Summary:

   - Fix a bug when splitting to a non-zero order

   - Documentation fix

   - Add a predefined 16-bit allocation limit

   - Various test suite fixes"

* tag 'xarray-5.12' of git://git.infradead.org/users/willy/xarray:
  idr test suite: Improve reporting from idr_find_test_1
  idr test suite: Create anchor before launching throbber
  idr test suite: Take RCU read lock in idr_find_test_1
  radix tree test suite: Register the main thread with the RCU library
  radix tree test suite: Fix compilation
  XArray: Add xa_limit_16b
  XArray: Fix splitting to non-zero orders
  XArray: Fix split documentation

io_uring: fix EIOCBQUEUED iter revert

iov_iter_revert() is done in completion handlers that happensf before
read/write returns -EIOCBQUEUED, no need to repeat reverting afterwards.
Moreover, even though it may appear being just a no-op, it's actually
races with 1) user forging a new iovec of a different size 2) reissue,
that is done via io-wq continues completely asynchronously.

Fixes: 3e6a0d3c7571c ("io_uring: fix -EAGAIN retry with IOPOLL")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring/io-wq: protect against sprintf overflow

task_pid may be large enough to not fit into the left space of
TASK_COMM_LEN-sized buffers and overflow in sprintf. We not so care
about uniqueness, so replace it with safer snprintf().

Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1702c6145d7e1c46fbc382f28334c02e1a3d3994.1617267273.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: don't mark S_ISBLK async work as unbounded

S_ISBLK is marked as unbounded work for async preparation, because it
doesn't match S_ISREG. That is incorrect, as any read/write to a block
device is also a bounded operation. Fix it up and ensure that S_ISBLK
isn't marked unbounded.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

ARM: mvebu: avoid clang -Wtautological-constant warning

Clang warns about the comparison when using a 32-bit phys_addr_t:

drivers/bus/mvebu-mbus.c:621:17: error: result of comparison of constant 4294967296 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (reg_start >= 0x100000000ULL)

Add a cast to shut up the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210323131952.2835509-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: pxa: mainstone: avoid -Woverride-init warning

The default initializer at the start of the array causes a warning
when building with W=1:

In file included from arch/arm/mach-pxa/mainstone.c:47:
arch/arm/mach-pxa/mainstone.h:124:33: error: initialized field overwritten [-Werror=override-init]
  124 | #define MAINSTONE_IRQ(x)        (MAINSTONE_NR_IRQS + (x))
      |                                 ^
arch/arm/mach-pxa/mainstone.h:133:33: note: in expansion of macro 'MAINSTONE_IRQ'
  133 | #define MAINSTONE_S0_CD_IRQ     MAINSTONE_IRQ(9)
      |                                 ^~~~~~~~~~~~~
arch/arm/mach-pxa/mainstone.c:506:15: note: in expansion of macro 'MAINSTONE_S0_CD_IRQ'
  506 |         [5] = MAINSTONE_S0_CD_IRQ,
      |               ^~~~~~~~~~~~~~~~~~~

Rework the initializer to list each element explicitly and only once.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323130849.2362001-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: omap1: fix building with clang IAS

The clang integrated assembler fails to build one file with
a complex asm instruction:

arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: error: invalid instruction, any one of the following would fix this:
mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: armv6t2
mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: thumb2
mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
^

The problem is that 'NR_IRQS_LEGACY' is not defined here. Apparently
gas does not care because we first add and then subtract this number,
leading to the immediate value to be the same regardless of the
specific definition of NR_IRQS_LEGACY.

Neither the way that 'gas' just silently builds this file, nor the
way that clang IAS makes nonsensical suggestions for how to fix it
is great. Fortunately there is an easy fix, which is to #include
the header that contains the definition.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210308153430.2530616-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

soc/fsl: qbman: fix conflicting alignment attributes

When building with W=1, gcc points out that the __packed attribute
on struct qm_eqcr_entry conflicts with the 8-byte alignment
attribute on struct qm_fd inside it:

drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned]

I assume that the alignment attribute is the correct one, and
that qm_eqcr_entry cannot actually be unaligned in memory,
so add the same alignment on the outer struct.

Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: keystone: fix integer overflow warning

clang warns about an impossible condition when building with 32-bit
phys_addr_t:

arch/arm/mach-keystone/keystone.c:79:16: error: result of comparison of constant 51539607551 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
            mem_end   > KEYSTONE_HIGH_PHYS_END) {
            ~~~~~~~   ^ ~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-keystone/keystone.c:78:16: error: result of comparison of constant 34359738368 with expression of type 'phys_addr_t' (aka 'unsigned int') is always true [-Werror,-Wtautological-constant-out-of-range-compare]
        if (mem_start < KEYSTONE_HIGH_PHYS_START ||
            ~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~

Change the temporary variable to a fixed-size u64 to avoid the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Link: https://lore.kernel.org/r/20210323131814.2751750-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

null_blk: fix command timeout completion handling

Memory backed or zoned null block devices may generate actual request
timeout errors due to the submission path being blocked on memory
allocation or zone locking. Unlike fake timeouts or injected timeouts,
the request submission path will call blk_mq_complete_request() or
blk_mq_end_request() for these real timeout errors, causing a double
completion and use after free situation as the block layer timeout
handler executes blk_mq_rq_timed_out() and __blk_mq_free_request() in
blk_mq_check_expired(). This problem often triggers a NULL pointer
dereference such as:

BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:blk_mq_sched_mark_restart_hctx+0x5/0x20
...
Call Trace:
  dd_finish_request+0x56/0x80
  blk_mq_free_request+0x37/0x130
  null_handle_cmd+0xbf/0x250 [null_blk]
  ? null_queue_rq+0x67/0xd0 [null_blk]
  blk_mq_dispatch_rq_list+0x122/0x850
  __blk_mq_do_dispatch_sched+0xbb/0x2c0
  __blk_mq_sched_dispatch_requests+0x13d/0x190
  blk_mq_sched_dispatch_requests+0x30/0x60
  __blk_mq_run_hw_queue+0x49/0x90
  process_one_work+0x26c/0x580
  worker_thread+0x55/0x3c0
  ? process_one_work+0x580/0x580
  kthread+0x134/0x150
  ? kthread_create_worker_on_cpu+0x70/0x70
  ret_from_fork+0x1f/0x30

This problem very often triggers when running the full btrfs xfstests
on a memory-backed zoned null block device in a VM with limited amount
of memory.

Avoid this by executing blk_mq_complete_request() in null_timeout_rq()
only for commands that are marked for a fake timeout completion using
the fake_timeout boolean in struct null_cmd. For timeout errors injected
through debugfs, the timeout handler will execute
blk_mq_complete_request()i as before. This is safe as the submission
path does not execute complete requests in this case.

In null_timeout_rq(), also make sure to set the command error field to
BLK_STS_TIMEOUT and to propagate this error through to the request
completion.

Reported-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210331225244.126426-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

idr test suite: Improve reporting from idr_find_test_1

Instead of just reporting an assertion failure, report enough information
that we can start diagnosing exactly went wrong.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

idr test suite: Create anchor before launching throbber

The throbber could race with creation of the anchor entry and cause the
IDR to have zero entries in it, which would cause the test to fail.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

idr test suite: Take RCU read lock in idr_find_test_1

When run on a single CPU, this test would frequently access already-freed
memory. Due to timing, this bug never showed up on multi-CPU tests.

Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

radix tree test suite: Register the main thread with the RCU library

Several test runners register individual worker threads with the
RCU library, but neglect to register the main thread, which can lead
to objects being freed while the main thread is in what appears to be
an RCU critical section.

Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()

Commit 496121c02127 ("ACPI: processor: idle: Allow probing on platforms
with one ACPI C-state") broke CPU0 hotplug on certain systems, e.g.
I'm observing the following on AWS Nitro (e.g r5b.xlarge but other
instance types are affected as well):

# echo 0 > /sys/devices/system/cpu/cpu0/online
# echo 1 > /sys/devices/system/cpu/cpu0/online
<10 seconds delay>
-bash: echo: write error: Input/output error

In fact, the above mentioned commit only revealed the problem and did
not introduce it. On x86, to wakeup CPU an NMI is being used and
hlt_play_dead()/mwait_play_dead() loops are prepared to handle it:

/*
* If NMI wants to wake up CPU0, start CPU0.
*/
if (wakeup_cpu0())
start_cpu0();

cpuidle_play_dead() -> acpi_idle_play_dead() (which is now being called on
systems where it wasn't called before the above mentioned commit) serves
the same purpose but it doesn't have a path for CPU0. What happens now on
wakeup is:
- NMI is sent to CPU0
- wakeup_cpu0_nmi() works as expected
- we get back to while (1) loop in acpi_idle_play_dead()
- safe_halt() puts CPU0 to sleep again.

The straightforward/minimal fix is add the special handling for CPU0 on x86
and that's what the patch is doing.

Fixes: 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ASoC: codecs: lpass-rx-macro: set npl clock rate correctly

NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.

Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: lpass-tx-macro: set npl clock rate correctly

NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.

Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>