Rick Edgecombe [Fri, 5 Feb 2021 02:32:24 +0000 (18:32 -0800)]
mm/vmalloc: separate put pages and flush VM flags
When VM_MAP_PUT_PAGES was added, it was defined with the same value as
VM_FLUSH_RESET_PERMS. This doesn't seem like it will cause any big
functional problems other than some excess flushing for VM_MAP_PUT_PAGES
allocations.
Redefine VM_MAP_PUT_PAGES to have its own value. Also, rearrange things
so flags are less likely to be missed in the future.
Link: https://lkml.kernel.org/r/20210122233706.9304-1-rick.p.edgecombe@intel.com
Fixes:
b944afc9d64d ("mm: add a VM_MAP_PUT_PAGES flag for vmap")
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rokudo Yan [Fri, 5 Feb 2021 02:32:20 +0000 (18:32 -0800)]
mm, compaction: move high_pfn to the for loop scope
In fast_isolate_freepages, high_pfn will be used if a prefered one (ie
PFN >= low_fn) not found.
But the high_pfn is not reset before searching an free area, so when it
was used as freepage, it may from another free area searched before. As
a result move_freelist_head(freelist, freepage) will have unexpected
behavior (eg corrupt the MOVABLE freelist)
Unable to handle kernel paging request at virtual address
dead000000000200
Mem abort info:
ESR = 0x96000044
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000044
CM = 0, WnR = 1
[
dead000000000200] address between user and kernel address ranges
-000|list_cut_before(inline)
-000|move_freelist_head(inline)
-000|fast_isolate_freepages(inline)
-000|isolate_freepages(inline)
-000|compaction_alloc(?, ?)
-001|unmap_and_move(inline)
-001|migrate_pages([NSD:0xFFFFFF80088CBBD0] from = 0xFFFFFF80088CBD88, [NSD:0xFFFFFF80088CBBC8] get_new_p
-002|__read_once_size(inline)
-002|static_key_count(inline)
-002|static_key_false(inline)
-002|trace_mm_compaction_migratepages(inline)
-002|compact_zone(?, [NSD:0xFFFFFF80088CBCB0] capc = 0x0)
-003|kcompactd_do_work(inline)
-003|kcompactd([X19] p = 0xFFFFFF93227FBC40)
-004|kthread([X20] _create = 0xFFFFFFE1AFB26380)
-005|ret_from_fork(asm)
The issue was reported on an smart phone product with 6GB ram and 3GB
zram as swap device.
This patch fixes the issue by reset high_pfn before searching each free
area, which ensure freepage and freelist match when call
move_freelist_head in fast_isolate_freepages().
Link: http://lkml.kernel.org/r/20190118175136.31341-12-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20210112094720.1238444-1-wu-yan@tcl.com
Fixes:
5a811889de10f1eb ("mm, compaction: use free lists to quickly locate a migration target")
Signed-off-by: Rokudo Yan <wu-yan@tcl.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Fri, 5 Feb 2021 02:32:17 +0000 (18:32 -0800)]
mm: migrate: do not migrate HugeTLB page whose refcount is one
All pages isolated for the migration have an elevated reference count and
therefore seeing a reference count equal to 1 means that the last user of
the page has dropped the reference and the page has became unused and
there doesn't make much sense to migrate it anymore.
This has been done for regular pages and this patch does the same for
hugetlb pages. Although the likelihood of the race is rather small for
hugetlb pages it makes sense the two code paths in sync.
Link: https://lkml.kernel.org/r/20210115124942.46403-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Fri, 5 Feb 2021 02:32:13 +0000 (18:32 -0800)]
mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active
The page_huge_active() can be called from scan_movable_pages() which do
not hold a reference count to the HugeTLB page. So when we call
page_huge_active() from scan_movable_pages(), the HugeTLB page can be
freed parallel. Then we will trigger a BUG_ON which is in the
page_huge_active() when CONFIG_DEBUG_VM is enabled. Just remove the
VM_BUG_ON_PAGE.
Link: https://lkml.kernel.org/r/20210115124942.46403-6-songmuchun@bytedance.com
Fixes:
7e1f049efb86 ("mm: hugetlb: cleanup using paeg_huge_active()")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Fri, 5 Feb 2021 02:32:10 +0000 (18:32 -0800)]
mm: hugetlb: fix a race between isolating and freeing page
There is a race between isolate_huge_page() and __free_huge_page().
CPU0: CPU1:
if (PageHuge(page))
put_page(page)
__free_huge_page(page)
spin_lock(&hugetlb_lock)
update_and_free_page(page)
set_compound_page_dtor(page,
NULL_COMPOUND_DTOR)
spin_unlock(&hugetlb_lock)
isolate_huge_page(page)
// trigger BUG_ON
VM_BUG_ON_PAGE(!PageHead(page), page)
spin_lock(&hugetlb_lock)
page_huge_active(page)
// trigger BUG_ON
VM_BUG_ON_PAGE(!PageHuge(page), page)
spin_unlock(&hugetlb_lock)
When we isolate a HugeTLB page on CPU0. Meanwhile, we free it to the
buddy allocator on CPU1. Then, we can trigger a BUG_ON on CPU0, because
it is already freed to the buddy allocator.
Link: https://lkml.kernel.org/r/20210115124942.46403-5-songmuchun@bytedance.com
Fixes:
c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Fri, 5 Feb 2021 02:32:06 +0000 (18:32 -0800)]
mm: hugetlb: fix a race between freeing and dissolving the page
There is a race condition between __free_huge_page()
and dissolve_free_huge_page().
CPU0: CPU1:
// page_count(page) == 1
put_page(page)
__free_huge_page(page)
dissolve_free_huge_page(page)
spin_lock(&hugetlb_lock)
// PageHuge(page) && !page_count(page)
update_and_free_page(page)
// page is freed to the buddy
spin_unlock(&hugetlb_lock)
spin_lock(&hugetlb_lock)
clear_page_huge_active(page)
enqueue_huge_page(page)
// It is wrong, the page is already freed
spin_unlock(&hugetlb_lock)
The race window is between put_page() and dissolve_free_huge_page().
We should make sure that the page is already on the free list when it is
dissolved.
As a result __free_huge_page would corrupt page(s) already in the buddy
allocator.
Link: https://lkml.kernel.org/r/20210115124942.46403-4-songmuchun@bytedance.com
Fixes:
c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Fri, 5 Feb 2021 02:32:03 +0000 (18:32 -0800)]
mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page
If a new hugetlb page is allocated during fallocate it will not be
marked as active (set_page_huge_active) which will result in a later
isolate_huge_page failure when the page migration code would like to
move that page. Such a failure would be unexpected and wrong.
Only export set_page_huge_active, just leave clear_page_huge_active as
static. Because there are no external users.
Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com
Fixes:
70c3547e36f5 (hugetlbfs: add hugetlbfs_fallocate())
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Thu, 4 Feb 2021 18:12:37 +0000 (20:12 +0200)]
Revert "x86/setup: don't remove E820_TYPE_RAM for pfn 0"
This reverts commit
bde9cfa3afe4324ec251e4af80ebf9b7afaf7afe.
Changing the first memory page type from E820_TYPE_RESERVED to
E820_TYPE_RAM makes it a part of "System RAM" resource rather than a
reserved resource and this in turn causes devmem_is_allowed() to treat
is as area that can be accessed but it is filled with zeroes instead of
the actual data as previously.
The change in /dev/mem output causes lilo to fail as was reported at
slakware users forum, and probably other legacy applications will
experience similar problems.
Link: https://www.linuxquestions.org/questions/slackware-14/slackware-current-lilo-vesa-warnings-after-recent-updates-4175689617/#post6214439
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 4 Feb 2021 18:08:30 +0000 (10:08 -0800)]
Merge tag 'acpi-5.11-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Address recent regression causing battery devices to be never bound to
a driver on some systems (Hans de Goede)"
* tag 'acpi-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Fix battery devices sometimes never binding
Linus Torvalds [Thu, 4 Feb 2021 18:01:17 +0000 (10:01 -0800)]
Merge tag 'ovl-fixes-5.11-rc7' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
- Fix capability conversion and minor overlayfs bugs that are related
to the unprivileged overlay mounts introduced in this cycle.
- Fix two recent (v5.10) and one old (v4.10) bug.
- Clean up security xattr copy-up (related to a SELinux regression).
* tag 'ovl-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: implement volatile-specific fsync error behaviour
ovl: skip getxattr of security labels
ovl: fix dentry leak in ovl_get_redirect
ovl: avoid deadlock on directory ioctl
cap: fix conversions on getxattr
ovl: perform vfs_getxattr() with mounter creds
ovl: add warning on user_ns mismatch
Linus Torvalds [Wed, 3 Feb 2021 19:56:58 +0000 (11:56 -0800)]
Merge tag 'for-linus-5.11-rc7' of git://git./linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger:
- Make sure to set a default console, otherwise ttynull is selected
- Revert initial ARCH_HAS_SET_MEMORY support, this needs more work
- Fix a regression due to ubd refactoring
- Various small fixes
* tag 'for-linus-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: time: fix initialization in time-travel mode
um: fix os_idle_sleep() to not hang
Revert "um: support some of ARCH_HAS_SET_MEMORY"
Revert "um: allocate a guard page to helper threads"
um: virtio: free vu_dev only with the contained struct device
um: kmsg_dumper: always dump when not tty console
um: stdio_console: Make preferred console
um: return error from ioremap()
um: ubd: fix command line handling of ubd
Linus Torvalds [Wed, 3 Feb 2021 19:03:40 +0000 (11:03 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Fix the arm64 linear map range detection for tagged addresses and
replace the bitwise operations with subtract (virt_addr_valid(),
__is_lm_address(), __lm_to_phys())"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Use simpler arithmetics for the linear map macros
arm64: Do not pass tagged addresses to __is_lm_address()
Linus Torvalds [Wed, 3 Feb 2021 18:02:00 +0000 (10:02 -0800)]
Merge tag 'trace-v5.11-rc5' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Initialize tracing-graph-pause at task creation, not start of
function tracing, to avoid corrupting the pause counter.
- Set "pause-on-trace" for latency tracers as that option breaks their
output (regression).
- Fix the wrong error return for setting kretprobes on future modules
(before they are loaded).
- Fix re-registering the same kretprobe.
- Add missing value check for added RCU variable reload.
* tag 'trace-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Fix race between tracing and removing tracepoint
kretprobe: Avoid re-registration of the same kretprobe earlier
tracing/kprobe: Fix to support kretprobe events on unloaded modules
tracing: Use pause-on-trace with the latency tracers
fgraph: Initialize tracing_graph_pause at task creation
Linus Torvalds [Wed, 3 Feb 2021 17:50:59 +0000 (09:50 -0800)]
Merge tag 'arm-soc-fixes-v5.11-3' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The code fixes in this round are all for the Texas Instruments OMAP
platform, addressing several regressions related to the ti-sysc
interconnect changes that was merged in linux-5.11 and one recently
introduced RCU usage warning.
Tero Kristo updates his maintainer file entries as he is changing to a
new employer.
The other changes are for devicetree files across eight different
platforms:
TI OMAP:
- multiple gpio related one-line fixes
Allwinner/sunxi:
- ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
- soc: sunxi: mbus: Remove DE2 display engine compatibles
NXP lpc32xx:
- ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
STMicroelectronics stm32
- multiple minor fixes for DHCOM/DHCOR boards
NXP Layerscape:
- Fix DCFG address range on LS1046A SoC
Amlogic meson:
- fix reboot issue on odroid C4
- revert an ethernet change that caused a regression
- meson-g12: Set FL-adj property value
Rockchip:
- multiple minor fixes on 64-bit rockchip machines
Qualcomm:
- Regression fixes for Lenovo Yoga touchpad and for interconnect
configuration
- Boot fixes for 'LPASS' clock configuration on two machines"
* tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
arm64: dts: ls1046a: fix dcfg address range
soc: sunxi: mbus: Remove DE2 display engine compatibles
arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
Revert "arm64: dts: amlogic: add missing ethernet reset ID"
arm64: dts: rockchip: Disable display for NanoPi R2S
ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4
arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node
drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus
ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled
ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02
ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX
ARM: dts: stm32: Fix GPIO hog names on DHCOM
ARM: dts: stm32: Disable optional TSC2004 on DRC02 board
ARM: dts: stm32: Disable WP on DHCOM uSD slot
ARM: dts: stm32: Connect card-detect signal on DHCOM
ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect
arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc
...
Linus Torvalds [Wed, 3 Feb 2021 17:44:22 +0000 (09:44 -0800)]
Merge tag 'gpio-fixes-for-v5.11-rc7' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Some more fixes from the GPIO subsystem for this release. This time
it's only core fixes:
- fix a memory leak in error path in gpiolib
- clear debounce period in output mode in the character device code
- remove shadowed variable"
* tag 'gpio-fixes-for-v5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: gpiolib: remove shadowed variable
gpiolib: free device name on error path to fix kmemleak
gpiolib: cdev: clear debounce period if line set to output
Linus Torvalds [Wed, 3 Feb 2021 17:39:13 +0000 (09:39 -0800)]
Merge tag 'platform-drivers-x86-v5.11-3' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Two last minute small but important fixes.
The hp-wmi change fixes an issue which is actively being hit by users:
https://bugzilla.redhat.com/show_bug.cgi?id=1918255
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3564
And the dell-wmi-sysman patch fixes a bug in the new dell-wmi-sysman
driver which causes some systems to hang at boot when the driver
loads"
* tag 'platform-drivers-x86-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: dell-wmi-sysman: fix a NULL pointer dereference
platform/x86: hp-wmi: Disable tablet-mode reporting by default
Arnd Bergmann [Wed, 3 Feb 2021 10:24:01 +0000 (11:24 +0100)]
Merge tag 'sunxi-fixes-for-5.11-2' of git://git./linux/kernel/git/sunxi/linux into arm/fixes
One fix for a phy-mode ethernet issue, and one to fix the display output on
SoCs with the Display Engine 2
* tag 'sunxi-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
soc: sunxi: mbus: Remove DE2 display engine compatibles
Link: https://lore.kernel.org/r/f8298059-f9ca-43b4-9e29-35bc0e0c9b15.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Alexandre Belloni [Wed, 3 Feb 2021 09:03:20 +0000 (10:03 +0100)]
ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
This reverts commit
c17e9377aa81664d94b4f2102559fcf2a01ec8e7.
The lpc32xx clock driver is not able to actually change the PLL rate as
this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK,
then stop the PLL, update the register, restart the PLL and wait for the
PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK
PLL.
Currently, the HCLK driver simply updates the registers but this has no
real effect and all the clock rate calculation end up being wrong. This is
especially annoying for the peripheral (e.g. UARTs, I2C, SPI).
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20210203090320.GA3760268@piout.net'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Hermann Lauer [Thu, 28 Jan 2021 11:18:42 +0000 (12:18 +0100)]
ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
packet loss rates. The realtek phy driver overrides the settings of the
pull ups for the delays, so fix this for BananaPro.
Fix the phy-mode description to correctly reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit
bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes:
10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board")
Signed-off-by: Hermann Lauer <Hermann.Lauer@uni-heidelberg.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210128111842.GA11919@lemon.iwr.uni-heidelberg.de
Arnd Bergmann [Tue, 2 Feb 2021 16:45:14 +0000 (17:45 +0100)]
Merge tag 'imx-fixes-5.11-3' of git://git./linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.11, round 3:
- Fix DCFG address range on LS1046A SoC.
* tag 'imx-fixes-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls1046a: fix dcfg address range
Link: https://lore.kernel.org/r/20210202071441.GP907@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds [Tue, 2 Feb 2021 18:46:59 +0000 (10:46 -0800)]
Merge tag 'clang-format-for-linux-v5.11-rc7' of git://github.com/ojeda/linux
Pull clang-format update from Miguel Ojeda:
"Update with the latest for_each macro list"
* tag 'clang-format-for-linux-v5.11-rc7' of git://github.com/ojeda/linux:
clang-format: Update with the latest for_each macro list
Linus Torvalds [Tue, 2 Feb 2021 18:40:20 +0000 (10:40 -0800)]
Merge tag 'dma-mapping-5.11-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Fix a kernel crash in the new dma-mapping benchmark test (Barry Song)"
* tag 'dma-mapping-5.11-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: benchmark: fix kernel crash when dma_map_single fails
Linus Torvalds [Tue, 2 Feb 2021 18:35:33 +0000 (10:35 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull vdpa fix from Michael Tsirkin:
"A single mlx bugfix"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix memory key MTT population
Linus Torvalds [Tue, 2 Feb 2021 18:26:09 +0000 (10:26 -0800)]
Merge tag 'net-5.11-rc7' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.11-rc7, including fixes from bpf and mac80211
trees.
Current release - regressions:
- ip_tunnel: fix mtu calculation
- mlx5: fix function calculation for page trees
Previous releases - regressions:
- vsock: fix the race conditions in multi-transport support
- neighbour: prevent a dead entry from updating gc_list
- dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add
Previous releases - always broken:
- bpf, cgroup: two copy_{from,to}_user() warn_on_once splats for BPF
cgroup getsockopt infra when user space is trying to race against
optlen, from Loris Reiff.
- bpf: add missing fput() in BPF inode storage map update helper
- udp: ipv4: manipulate network header of NATed UDP GRO fraglist
- mac80211: fix station rate table updates on assoc
- r8169: work around RTL8125 UDP HW bug
- igc: report speed and duplex as unknown when device is runtime
suspended
- rxrpc: fix deadlock around release of dst cached on udp tunnel"
* tag 'net-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundary
net: ipa: fix two format specifier errors
net: ipa: use the right accessor in ipa_endpoint_status_skip()
net: ipa: be explicit about endianness
net: ipa: add a missing __iomem attribute
net: ipa: pass correct dma_handle to dma_free_coherent()
r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set
net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGS
net: mvpp2: TCAM entry enable should be written after SRAM data
net: lapb: Copy the skb before sending a packet
net/mlx5e: Release skb in case of failure in tc update skb
net/mlx5e: Update max_opened_tc also when channels are closed
net/mlx5: Fix leak upon failure of rule creation
net/mlx5: Fix function calculation for page trees
docs: networking: swap words in icmp_errors_use_inbound_ifaddr doc
udp: ipv4: manipulate network header of NATed UDP GRO fraglist
net: ip_tunnel: fix mtu calculation
vsock: fix the race conditions in multi-transport support
net: sched: replaced invalid qdisc tree flush helper in qdisc_replace
ibmvnic: device remove has higher precedence over reset
...
Catalin Marinas [Mon, 1 Feb 2021 19:06:34 +0000 (19:06 +0000)]
arm64: Use simpler arithmetics for the linear map macros
Because of the tagged addresses, the __is_lm_address() and
__lm_to_phys() macros grew to some harder to understand bitwise
operations using PAGE_OFFSET. Since these macros only accept untagged
addresses, use a simple subtract operation.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210201190634.22942-3-catalin.marinas@arm.com
Catalin Marinas [Mon, 1 Feb 2021 19:06:33 +0000 (19:06 +0000)]
arm64: Do not pass tagged addresses to __is_lm_address()
Commit
519ea6f1c82f ("arm64: Fix kernel address detection of
__is_lm_address()") fixed the incorrect validation of addresses below
PAGE_OFFSET. However, it no longer allowed tagged addresses to be passed
to virt_addr_valid().
Fix this by explicitly resetting the pointer tag prior to invoking
__is_lm_address(). This is consistent with the __lm_to_phys() macro.
Fixes:
519ea6f1c82f ("arm64: Fix kernel address detection of __is_lm_address()")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org> # 5.4.x
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210201190634.22942-2-catalin.marinas@arm.com
Andreas Oetken [Tue, 2 Feb 2021 09:03:04 +0000 (10:03 +0100)]
net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundary
sup_multicast_addr is passed to ether_addr_equal for address comparison
which casts the address inputs to u16 leading to an unaligned access.
Aligning the sup_multicast_addr to u16 boundary fixes the issue.
Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com>
Link: https://lore.kernel.org/r/20210202090304.2740471-1-ennoerlangen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 2 Feb 2021 16:51:25 +0000 (08:51 -0800)]
Merge tag 'mlx5-fixes-2021-02-01' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-02-01
Please note the first patch in this series
("Fix function calculation for page trees") is fixing a regression
due to previous fix in net which you didn't include in your previous
rc pr. So I hope this series will make it into your next rc pr,
so mlx5 won't be broken in the next rc.
* tag 'mlx5-fixes-2021-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Release skb in case of failure in tc update skb
net/mlx5e: Update max_opened_tc also when channels are closed
net/mlx5: Fix leak upon failure of rule creation
net/mlx5: Fix function calculation for page trees
====================
Link: https://lore.kernel.org/r/20210202070703.617251-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 2 Feb 2021 16:48:17 +0000 (08:48 -0800)]
Merge branch 'net-ipa-a-few-bug-fixes'
Alex Elder says:
====================
net: ipa: a few bug fixes
This series fixes four minor bugs. The first two are things that
sparse points out. All four are very simple and each patch should
explain itself pretty well.
====================
Link: https://lore.kernel.org/r/20210201232609.3524451-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Mon, 1 Feb 2021 23:26:09 +0000 (17:26 -0600)]
net: ipa: fix two format specifier errors
Fix two format specifiers that used %lu for a size_t in "ipa_mem.c".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Mon, 1 Feb 2021 23:26:08 +0000 (17:26 -0600)]
net: ipa: use the right accessor in ipa_endpoint_status_skip()
When extracting the destination endpoint ID from the status in
ipa_endpoint_status_skip(), u32_get_bits() is used. This happens to
work, but it's wrong: the structure field is only 8 bits wide
instead of 32.
Fix this by using u8_get_bits() to get the destination endpoint ID.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Mon, 1 Feb 2021 23:26:07 +0000 (17:26 -0600)]
net: ipa: be explicit about endianness
Sparse warns that the assignment of the metadata mask for a QMAP
endpoint in ipa_endpoint_init_hdr_metadata_mask() is a bad
assignment. We know we want the mask value to be big endian, even
though the value we write is in host byte order. Use a __force
tag to indicate we really mean it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Mon, 1 Feb 2021 23:26:06 +0000 (17:26 -0600)]
net: ipa: add a missing __iomem attribute
The virt local variable in gsi_channel_state() does not have an
__iomem attribute but should. Fix this.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amy Parker <enbyamy@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Tue, 2 Feb 2021 05:55:25 +0000 (08:55 +0300)]
net: ipa: pass correct dma_handle to dma_free_coherent()
The "ring->addr = addr;" assignment is done a few lines later so we
can't use "ring->addr" yet. The correct dma_handle is "addr".
Fixes:
650d1603825d ("soc: qcom: ipa: the generic software interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/YBjpTU2oejkNIULT@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Mon, 1 Feb 2021 20:50:56 +0000 (21:50 +0100)]
r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set
So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ
is set and interrupt is shared, then free_irq() creates an "artificial"
interrupt by calling the interrupt handler. The "link change" flag is set
in the interrupt status register, causing phylib to eventually call
phy_suspend(). Because the net_device is detached from the PHY already,
the PHY driver can't recognize that WoL is configured and powers down the
PHY.
Fixes:
f1e911d5d0df ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/fe732c2c-a473-9088-3974-df83cfbd6efd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabyrzhan Tasbolatov [Mon, 1 Feb 2021 20:32:33 +0000 (02:32 +0600)]
net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGS
syzbot found WARNING in rds_rdma_extra_size [1] when RDS_CMSG_RDMA_ARGS
control message is passed with user-controlled
0x40001 bytes of args->nr_local, causing order >= MAX_ORDER condition.
The exact value 0x40001 can be checked with UIO_MAXIOV which is 0x400.
So for kcalloc() 0x400 iovecs with sizeof(struct rds_iovec) = 0x10
is the closest limit, with 0x10 leftover.
Same condition is currently done in rds_cmsg_rdma_args().
[1] WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
alloc_pages include/linux/gfp.h:547 [inline]
kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
kmalloc_array include/linux/slab.h:592 [inline]
kcalloc include/linux/slab.h:621 [inline]
rds_rdma_extra_size+0xb2/0x3b0 net/rds/rdma.c:568
rds_rm_size net/rds/send.c:928 [inline]
Reported-by: syzbot+1bd2b07f93745fa38425@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/20210201203233.1324704-1-snovitoll@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Chulski [Mon, 1 Feb 2021 09:35:39 +0000 (11:35 +0200)]
net: mvpp2: TCAM entry enable should be written after SRAM data
Last TCAM data contains TCAM enable bit.
It should be written after SRAM data before entry enabled.
Fixes:
3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1612172139-28343-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Tue, 2 Feb 2021 16:42:26 +0000 (17:42 +0100)]
Merge tag 'ti-k3-maintainer-for-v5.12' of git://git./linux/kernel/git/nmenon/linux into arm/fixes
Maintainer changes for TI for v5.12 merge window:
- Tero switches to kernel.org address
* tag 'ti-k3-maintainer-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
MAINTAINERS: Update my email address and maintainer level status
Link: https://lore.kernel.org/r/20210130131411.afna4wj72r7xscqn@skinny
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Xie He [Mon, 1 Feb 2021 05:57:06 +0000 (21:57 -0800)]
net: lapb: Copy the skb before sending a packet
When sending a packet, we will prepend it with an LAPB header.
This modifies the shared parts of a cloned skb, so we should copy the
skb rather than just clone it, before we prepend the header.
In "Documentation/networking/driver.rst" (the 2nd point), it states
that drivers shouldn't modify the shared parts of a cloned skb when
transmitting.
The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called
when an skb is being sent, clones the skb and sents the clone to
AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte
pseudo-header before handing over the skb to us, if we don't copy the
skb before prepending the LAPB header, the first byte of the packets
received on AF_PACKET sockets can be corrupted.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20210201055706.415842-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 2 Feb 2021 16:37:00 +0000 (08:37 -0800)]
Merge tag 'mac80211-for-net-2021-02-02' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two fixes:
- station rate tables were not updated correctly
after association, leading to bad configuration
- rtl8723bs (staging) was initializing data incorrectly
after the previous fix and needed to move the init
later
* tag 'mac80211-for-net-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
staging: rtl8723bs: Move wiphy setup to after reading the regulatory settings from the chip
mac80211: fix station rate table updates on assoc
====================
Link: https://lore.kernel.org/r/20210202143505.37610-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexey Kardashevskiy [Tue, 2 Feb 2021 07:23:26 +0000 (18:23 +1100)]
tracepoint: Fix race between tracing and removing tracepoint
When executing a tracepoint, the tracepoint's func is dereferenced twice -
in __DO_TRACE() (where the returned pointer is checked) and later on in
__traceiter_##_name where the returned pointer is dereferenced without
checking which leads to races against tracepoint_removal_sync() and
crashes.
This adds a check before referencing the pointer in tracepoint_ptr_deref.
Link: https://lkml.kernel.org/r/20210202072326.120557-1-aik@ozlabs.ru
Cc: stable@vger.kernel.org
Fixes:
d25e37d89dd2f ("tracepoint: Optimize using static_call()")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Maor Dickman [Sun, 31 Jan 2021 16:47:15 +0000 (18:47 +0200)]
net/mlx5e: Release skb in case of failure in tc update skb
In case of failure in tc update skb the packet is dropped
without freeing the skb.
Fixed by freeing the skb in case failure in tc update skb.
Fixes:
d6d27782864f ("net/mlx5: E-Switch, Restore chain id on miss")
Fixes:
c75690972228 ("net/mlx5e: Add tc chains offload support for nic flows")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maxim Mikityanskiy [Thu, 28 Jan 2021 12:37:59 +0000 (14:37 +0200)]
net/mlx5e: Update max_opened_tc also when channels are closed
max_opened_tc is used for stats, so that potentially non-zero stats
won't disappear when num_tc decreases. However, mlx5e_setup_tc_mqprio
fails to update it in the flow where channels are closed.
This commit fixes it. The new value of priv->channels.params.num_tc is
always checked on exit. In case of errors it will just be the old value,
and in case of success it will be the updated value.
Fixes:
05909babce53 ("net/mlx5e: Avoid reset netdev stats on configuration changes")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Gottlieb [Wed, 20 Jan 2021 15:41:18 +0000 (17:41 +0200)]
net/mlx5: Fix leak upon failure of rule creation
When creation of a new rule that requires allocation of an FTE fails,
need to call to tree_put_node on the FTE in order to release its'
resource.
Fixes:
cefc23554fc2 ("net/mlx5: Fix FTE cleanup")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Daniel Jurgens [Mon, 1 Feb 2021 16:11:10 +0000 (18:11 +0200)]
net/mlx5: Fix function calculation for page trees
The function calculation always results in a value of 0. This works
generally, but when the release all pages feature is enabled it will
result in crashes.
Fixes:
0aa128475d33 ("net/mlx5: Maintain separate page trees for ECPF and PF functions")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jakub Kicinski [Tue, 2 Feb 2021 04:23:44 +0000 (20:23 -0800)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-02-01
This series contains updates to igc and i40e drivers.
Kai-Heng Feng fixes igc to report unknown speed and duplex during suspend
as an attempted read will cause errors.
Kevin Lo sets the default value to -IGC_ERR_NVM instead of success for
writing shadow RAM as this could miss a timeout. Also propagates the return
value for Flow Control configuration to properly pass on errors for igc.
Aleksandr reverts commit
2ad1274fa35a ("i40e: don't report link up for a VF
who hasn't enabled queues") as this can cause link flapping.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Revert "i40e: don't report link up for a VF who hasn't enabled queues"
igc: check return value of ret_val in igc_config_fc_after_link_up
igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr
igc: Report speed and duplex as unknown when device is runtime suspended
====================
Link: https://lore.kernel.org/r/20210201214618.852831-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vincent Bernat [Sat, 30 Jan 2021 19:05:18 +0000 (20:05 +0100)]
docs: networking: swap words in icmp_errors_use_inbound_ifaddr doc
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Link: https://lore.kernel.org/r/20210130190518.854806-1-vincent@bernat.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dongseok Yi [Fri, 29 Jan 2021 23:13:27 +0000 (08:13 +0900)]
udp: ipv4: manipulate network header of NATed UDP GRO fraglist
UDP/IP header of UDP GROed frag_skbs are not updated even after NAT
forwarding. Only the header of head_skb from ip_finish_output_gso ->
skb_gso_segment is updated but following frag_skbs are not updated.
A call path skb_mac_gso_segment -> inet_gso_segment ->
udp4_ufo_fragment -> __udp_gso_segment -> __udp_gso_segment_list
does not try to update UDP/IP header of the segment list but copy
only the MAC header.
Update port, addr and check of each skb of the segment list in
__udp_gso_segment_list. It covers both SNAT and DNAT.
Fixes:
9fd1ff5d2ac7 (udp: Support UDP fraglist GRO/GSO.)
Signed-off-by: Dongseok Yi <dseok.yi@samsung.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://lore.kernel.org/r/1611962007-80092-1-git-send-email-dseok.yi@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko [Fri, 29 Jan 2021 22:27:47 +0000 (01:27 +0300)]
net: ip_tunnel: fix mtu calculation
dev->hard_header_len for tunnel interface is set only when header_ops
are set too and already contains full overhead of any tunnel encapsulation.
That's why there is not need to use this overhead twice in mtu calc.
Fixes:
fdafed459998 ("ip_gre: set dev->hard_header_len and dev->needed_headroom properly")
Reported-by: Slava Bacherikov <mail@slava.cc>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1611959267-20536-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Popov [Mon, 1 Feb 2021 08:47:19 +0000 (11:47 +0300)]
vsock: fix the race conditions in multi-transport support
There are multiple similar bugs implicitly introduced by the
commit
c0cfa2d8a788fcf4 ("vsock: add multi-transports support") and
commit
6a2c0962105ae8ce ("vsock: prevent transport modules unloading").
The bug pattern:
[1] vsock_sock.transport pointer is copied to a local variable,
[2] lock_sock() is called,
[3] the local variable is used.
VSOCK multi-transport support introduced the race condition:
vsock_sock.transport value may change between [1] and [2].
Let's copy vsock_sock.transport pointer to local variables after
the lock_sock() call.
Fixes:
c0cfa2d8a788fcf4 ("vsock: add multi-transports support")
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20210201084719.2257066-1-alex.popov@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Ovechkin [Mon, 1 Feb 2021 20:00:49 +0000 (23:00 +0300)]
net: sched: replaced invalid qdisc tree flush helper in qdisc_replace
Commit
e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers")
introduced qdisc tree flush/purge helpers, but erroneously used flush helper
instead of purge helper in qdisc_replace function.
This issue was found in our CI, that tests various qdisc setups by configuring
qdisc and sending data through it. Call of invalid helper sporadically leads
to corruption of vt_tree/cf_tree of hfsc_class that causes kernel oops:
Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-
8f6859df #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:rb_insert_color+0x18/0x190
Code: c3 31 c0 c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 07 48 85 c0 0f 84 05 01 00 00 48 8b 10 f6 c2 01 0f 85 34 01 00 00 <48> 8b 4a 08 49 89 d0 48 39 c1 74 7d 48 85 c9 74 32 f6 01 01 75 2d
RSP: 0018:
ffffc900000b8bb0 EFLAGS:
00010246
RAX:
ffff8881ef4c38b0 RBX:
ffff8881d956e400 RCX:
ffff8881ef4c38b0
RDX:
0000000000000000 RSI:
ffff8881d956f0a8 RDI:
ffff8881d956e4b0
RBP:
0000000000000000 R08:
000000d5c4e249da R09:
1600000000000000
R10:
ffffc900000b8be0 R11:
ffffc900000b8b28 R12:
0000000000000001
R13:
000000000000005a R14:
ffff8881f0905000 R15:
ffff8881f0387d00
FS:
0000000000000000(0000) GS:
ffff8881f8b00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000008 CR3:
00000001f4796004 CR4:
0000000000060ee0
Call Trace:
<IRQ>
init_vf.isra.19+0xec/0x250 [sch_hfsc]
hfsc_enqueue+0x245/0x300 [sch_hfsc]
? fib_rules_lookup+0x12a/0x1d0
? __dev_queue_xmit+0x4b6/0x930
? hfsc_delete_class+0x250/0x250 [sch_hfsc]
__dev_queue_xmit+0x4b6/0x930
? ip6_finish_output2+0x24d/0x590
ip6_finish_output2+0x24d/0x590
? ip6_output+0x6c/0x130
ip6_output+0x6c/0x130
? __ip6_finish_output+0x110/0x110
mld_sendpack+0x224/0x230
mld_ifc_timer_expire+0x186/0x2c0
? igmp6_group_dropped+0x200/0x200
call_timer_fn+0x2d/0x150
run_timer_softirq+0x20c/0x480
? tick_sched_do_timer+0x60/0x60
? tick_sched_timer+0x37/0x70
__do_softirq+0xf7/0x2cb
irq_exit+0xa0/0xb0
smp_apic_timer_interrupt+0x74/0x150
apic_timer_interrupt+0xf/0x20
</IRQ>
Fixes:
e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Reported-by: Alexander Kuznetsov <wwfq@yandex-team.ru>
Acked-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20210201200049.299153-1-ovov@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lijun Pan [Fri, 29 Jan 2021 04:34:01 +0000 (22:34 -0600)]
ibmvnic: device remove has higher precedence over reset
Returning -EBUSY in ibmvnic_remove() does not actually hold the
removal procedure since driver core doesn't care for the return
value (see __device_release_driver() in drivers/base/dd.c
calling dev->bus->remove()) though vio_bus_remove
(in arch/powerpc/platforms/pseries/vio.c) records the
return value and passes it on. [1]
During the device removal precedure, checking for resetting
bit is dropped so that we can continue executing all the
cleanup calls in the rest of the remove function. Otherwise,
it can cause latent memory leaks and kernel crashes.
[1] https://lore.kernel.org/linuxppc-dev/
20210117101242.dpwayq6wdgfdzirl@pengutronix.de/T/#m48f5befd96bc9842ece2a3ad14f4c27747206a53
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes:
7d7195a026ba ("ibmvnic: Do not process device remove during device reset")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20210129043402.95744-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DENG Qingfang [Sat, 30 Jan 2021 13:43:34 +0000 (21:43 +0800)]
net: dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add
Having multiple destination ports for a unicast address does not make
sense.
Make port_db_load_purge override existent unicast portvec instead of
adding a new port bit.
Fixes:
884729399260 ("net: dsa: mv88e6xxx: handle multiple ports in ATU")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20210130134334.10243-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aleksandr Loktionov [Sat, 23 Jan 2021 00:22:23 +0000 (00:22 +0000)]
i40e: Revert "i40e: don't report link up for a VF who hasn't enabled queues"
This reverts commit
2ad1274fa35ace5c6360762ba48d33b63da2396c
VF queues were not brought up when PF was brought up after being
downed if the VF driver disabled VFs queues during PF down.
This could happen in some older or external VF driver implementations.
The problem was that PF driver used vf->queues_enabled as a condition
to decide what link-state it would send out which caused the issue.
Remove the check for vf->queues_enabled in the VF link notify.
Now VF will always be notified of the current link status.
Also remove the queues_enabled member from i40e_vf structure as it is
not used anymore. Otherwise VNF implementation was broken and caused
a link flap.
The original commit was a workaround to avoid breaking existing VFs though
it's really a fault of the VF code not the PF. The commit should be safe to
revert as all of the VFs we know of have been fixed. Also, since we now
know there is a related bug in the workaround, removing it is preferred.
Fixes:
2ad1274fa35a ("i40e: don't report link up for a VF who hasn't enabled")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Mon, 1 Feb 2021 19:15:57 +0000 (11:15 -0800)]
Merge tag 'media/v5.11-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"The rockship rkisp1 driver will be promoted from staging in 5.11.
While not too late, do a few uAPI changes which are needed to better
support its functionalities"
* tag 'media/v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rockchip: rkisp1: extend uapi array sizes
media: rockchip: rkisp1: carry ip version information
media: rockchip: rkisp1: reduce number of histogram grid elements in uapi
media: rkisp1: stats: mask the hist_bins values
media: rkisp1: stats: remove a wrong cast to u8
media: rkisp1: uapi: change hist_bins array type from __u16 to __u32
Hans de Goede [Mon, 1 Feb 2021 15:29:56 +0000 (16:29 +0100)]
staging: rtl8723bs: Move wiphy setup to after reading the regulatory settings from the chip
Commit
81f153faacd0 ("staging: rtl8723bs: fix wireless regulatory API
misuse") moved the wiphy_apply_custom_regulatory() call to earlier in the
driver's init-sequence, so that it gets called before wiphy_register().
But at this point in time the eFuses which code the regulatory-settings
for the chip have not been read by the driver yet, causing
_rtw_reg_apply_flags() to set the IEEE80211_CHAN_DISABLED flag on *all*
channels.
On the device where I initially tested the fix, a Jumper EZpad 7 tablet,
this does not cause any problems because shortly after init the
rtw_reg_notifier() gets called fixing things up. I guess this happens
into response to receiving a (broadcast) packet with regulatory info
from the access-point ?
But on another device with a RTL8723BS wifi chip, an Acer Switch 10E
(SW3-016), the rtw_reg_notifier() never gets called. I assume that some
fuse has been set on this device to ignore regulatory info received from
access-points.
This means that on the Acer the driver is stuck in a state with all
channels disabled, leading to non working Wifi.
We cannot move the wiphy_apply_custom_regulatory() call back, because
that call must be made before the wiphy_register() call.
Instead move the entire rtw_wdev_alloc() call to after the Efuses have
been read, fixing all channels being disabled in the initial channel-map.
Fixes:
81f153faacd0 ("staging: rtl8723bs: fix wireless regulatory API misuse")
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210201152956.370186-2-hdegoede@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Kevin Lo [Thu, 7 Jan 2021 06:10:38 +0000 (14:10 +0800)]
igc: check return value of ret_val in igc_config_fc_after_link_up
Check return value from ret_val to make error check actually work.
Fixes:
4eb8080143a9 ("igc: Add setup link functionality")
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Kevin Lo [Sun, 20 Dec 2020 14:18:19 +0000 (22:18 +0800)]
igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr
This patch sets the default return value to -IGC_ERR_NVM in
igc_write_nvm_srwr. Without this change it wouldn't lead to a shadow RAM
write EEWR timeout.
Fixes:
ab4056126813 ("igc: Add NVM support")
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Kai-Heng Feng [Wed, 2 Dec 2020 07:50:17 +0000 (15:50 +0800)]
igc: Report speed and duplex as unknown when device is runtime suspended
Similar to commit
165ae7a8feb5 ("igb: Report speed and duplex as unknown
when device is runtime suspended"), if we try to read speed and duplex
sysfs while the device is runtime suspended, igc will complain and
stops working:
[ 123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached
[ 123.450052] BUG: kernel NULL pointer dereference, address:
0000000000000008
[ 123.450056] #PF: supervisor read access in kernel mode
[ 123.450058] #PF: error_code(0x0000) - not-present page
[ 123.450059] PGD 0 P4D 0
[ 123.450064] Oops: 0000 [#1] SMP NOPTI
[ 123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G U W OE 5.10.0-1002-oem #2+rkl2-Ubuntu
[ 123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc]
[ 123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4
[ 123.450083] RSP: 0018:
ffffb0d100d6fcc0 EFLAGS:
00010202
[ 123.450085] RAX:
0000000000000008 RBX:
ffffb0d100d6fd30 RCX:
0000000000000000
[ 123.450087] RDX:
0000000000000000 RSI:
0000000000000008 RDI:
ffff945a12716c10
[ 123.450089] RBP:
ffffb0d100d6fce0 R08:
ffff945a12716550 R09:
ffff945a09874000
[ 123.450090] R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000008
[ 123.450092] R13:
ffff945a12716000 R14:
ffff945a037da280 R15:
ffff945a037da290
[ 123.450094] FS:
00007f3b34c868c0(0000) GS:
ffff945b89200000(0000) knlGS:
0000000000000000
[ 123.450096] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 123.450098] CR2:
0000000000000008 CR3:
00000001144de006 CR4:
0000000000770ef0
[ 123.450100] PKRU:
55555554
[ 123.450101] Call Trace:
[ 123.450111] igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc]
[ 123.450118] __ethtool_get_link_ksettings+0x71/0xb0
[ 123.450123] duplex_show+0x74/0xc0
[ 123.450129] dev_attr_show+0x1d/0x40
[ 123.450134] sysfs_kf_seq_show+0xa1/0x100
[ 123.450137] kernfs_seq_show+0x27/0x30
[ 123.450142] seq_read+0xb7/0x400
[ 123.450148] ? common_file_perm+0x72/0x170
[ 123.450151] kernfs_fop_read+0x35/0x1b0
[ 123.450155] vfs_read+0xb5/0x1b0
[ 123.450157] ksys_read+0x67/0xe0
[ 123.450160] __x64_sys_read+0x1a/0x20
[ 123.450164] do_syscall_64+0x38/0x90
[ 123.450168] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 123.450170] RIP: 0033:0x7f3b351fe142
[ 123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 123.450174] RSP: 002b:
00007fffef2ec138 EFLAGS:
00000246 ORIG_RAX:
0000000000000000
[ 123.450177] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f3b351fe142
[ 123.450179] RDX:
0000000000001001 RSI:
00005644c047f070 RDI:
0000000000000003
[ 123.450180] RBP:
00007fffef2ec340 R08:
00005644c047f070 R09:
00007f3b352d9320
[ 123.450182] R10:
00005644c047c010 R11:
0000000000000246 R12:
00005644c047cbf0
[ 123.450184] R13:
00005644c047e6d0 R14:
0000000000000003 R15:
00007fffef2ec140
[ 123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel
mei_me dell_wmi
[ 123.450266] dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake
[ 123.450335] CR2:
0000000000000008
[ 123.450338] ---[ end trace
9f731e38b53c35cc ]---
The more generic approach will be wrap get_link_ksettings() with begin()
and complete() callbacks, and calls runtime resume and runtime suspend
routine respectively. However, igc is like igb, runtime resume routine
uses rtnl_lock() which upper ethtool layer also uses.
So to prevent a deadlock on rtnl, take a different approach, use
pm_runtime_suspended() to avoid reading register while device is runtime
suspended.
Fixes:
8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Hans de Goede [Mon, 1 Feb 2021 16:34:19 +0000 (17:34 +0100)]
ACPI: scan: Fix battery devices sometimes never binding
With the new 2 step scanning process, which defers instantiating some
ACPI-devices based on their _DEP to the second step, the following may
happen:
1. During the first acpi_walk_namespace(acpi_bus_check_add) call
acpi_scan_check_dep() gets called on the Battery ACPI dev handle and
adds one or more deps for this handle to the acpi_dep_list
2. During the first acpi_bus_attach() call one or more of the suppliers of
these deps get their driver attached and
acpi_walk_dep_device_list(supplier_handle) gets called.
At this point acpi_bus_get_device(dep->consumer) get called,
but since the battery has DEPs it has not been instantiated during the
first acpi_walk_namespace(acpi_bus_check_add), so the
acpi_bus_get_device(dep->consumer) call fails.
Before this commit, acpi_walk_dep_device_list() would now continue
*without* removing the acpi_dep_data entry for this supplier,consumer
pair from the acpi_dep_list.
3. During the second acpi_walk_namespace(acpi_bus_check_add) call
an acpi_device gets instantiated for the battery and
acpi_scan_dep_init() gets called to initialize its dep_unmet val.
Before this commit, the dep_unmet count would include DEPs for
suppliers for which acpi_walk_dep_device_list(supplier_handle)
has already been called, so it will never become 0 and the
ACPI battery driver will never get attached / bind.
Fix the ACPI battery driver never binding in this scenario by making
acpi_walk_dep_device_list() always remove matching acpi_dep_data
entries independent of the acpi_bus_get_device(dep->consumer) call
succeeding or not.
Fixes:
71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Felix Fietkau [Mon, 1 Feb 2021 08:33:24 +0000 (09:33 +0100)]
mac80211: fix station rate table updates on assoc
If the driver uses .sta_add, station entries are only uploaded after the sta
is in assoc state. Fix early station rate table updates by deferring them
until the sta has been uploaded.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210201083324.3134-1-nbd@nbd.name
[use rcu_access_pointer() instead since we won't dereference here]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Wolfram Sang [Tue, 5 Jan 2021 10:59:14 +0000 (11:59 +0100)]
gpio: gpiolib: remove shadowed variable
After refactoring, we had two variables for the same thing. Remove the
second declaration, one is enough here. Found by cppcheck.
drivers/gpio/gpiolib.c:2551:17: warning: Local variable 'ret' shadows outer variable [shadowVariable]
Fixes:
d377f56f34f5 ("gpio: gpiolib: Normalize return code variable name")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Linus Torvalds [Sun, 31 Jan 2021 21:50:09 +0000 (13:50 -0800)]
Linux 5.11-rc6
Mario Limonciello [Fri, 29 Jan 2021 17:26:54 +0000 (11:26 -0600)]
platform/x86: dell-wmi-sysman: fix a NULL pointer dereference
An upcoming Dell platform is causing a NULL pointer dereference
in dell-wmi-sysman initialization. Validate that the input from
BIOS matches correct ACPI types and abort module initialization
if it fails.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210129172654.2326751-1-mario.limonciello@dell.com
[hdegoede@redhat.com: Drop redundant release_attributes_data() call]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Linus Torvalds [Sun, 31 Jan 2021 19:57:37 +0000 (11:57 -0800)]
Merge tag 'efi-urgent-for-v5.11' of git://git./linux/kernel/git/tip/tip
Pull EFI fix from Borislav Petkov:
"A single fix from Lukas: handle boolean device properties imported
from Apple firmware correctly"
* tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/apple-properties: Reinstate support for boolean properties
Linus Torvalds [Sun, 31 Jan 2021 19:48:12 +0000 (11:48 -0800)]
Merge tag 'x86_entry_for_v5.11_rc6' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single fix for objtool to generate proper unwind info for newer
toolchains which do not generate section symbols anymore. And a
cleanup ontop.
This was originally going to go during the next merge window but
people can already trigger a build error with binutils-2.36 which
doesn't emit section symbols - something which objtool relies on - so
let's expedite it"
* tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument
x86/entry: Emit a symbol for register restoring thunk
Linus Torvalds [Sun, 31 Jan 2021 19:40:57 +0000 (11:40 -0800)]
Merge tag 'timers-urgent-2021-01-31' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix for handling advertised, but non-existent 146818 RTCs correctly.
With the recent UIP handling changes the time readout of non-existent
RTCs hangs forever as the read returns always 0xFF which means the UIP
bit is set.
Sanity check the RTC before registering by checking the RTC_VALID
register for correctness"
* tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtc: mc146818: Detect and handle broken RTCs
Linus Torvalds [Sun, 31 Jan 2021 19:39:32 +0000 (11:39 -0800)]
Merge tag 'core-urgent-2021-01-31' of git://git./linux/kernel/git/tip/tip
Pull single stepping fix from Thomas Gleixner:
"A single fix for the single step reporting regression caused by
getting the condition wrong when moving SYSCALL_EMU away from TIF
flags"
[ There's apparently another problem too, fix pending ]
* tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Unbreak single step reporting behaviour
Linus Torvalds [Sun, 31 Jan 2021 19:37:43 +0000 (11:37 -0800)]
Merge tag 'powerpc-5.11-6' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a bug in our soft interrupt masking, which could lead to
interrupt replaying recursing, causing spurious interrupts.
Thanks to Nicholas Piggin"
* tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt
Linus Torvalds [Sun, 31 Jan 2021 19:33:27 +0000 (11:33 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Just one I2C driver update this time"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: Move suspend and resume handling to NOIRQ phase
Linus Torvalds [Sun, 31 Jan 2021 19:23:35 +0000 (11:23 -0800)]
Merge branch 'for-rc-5.11' of git://git./linux/kernel/git/pavel/linux-leds
Pull LED fixes from Pavel Machek:
"This pull is due to 'leds: trigger: fix potential deadlock with
libata' -- people find the warn annoying.
It also contains new driver and two trivial fixes"
* 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: rt8515: Add Richtek RT8515 LED driver
dt-bindings: leds: Add DT binding for Richtek RT8515
leds: trigger: fix potential deadlock with libata
leds: leds-ariel: convert comma to semicolon
leds: leds-lm3533: convert comma to semicolon
Linus Torvalds [Sun, 31 Jan 2021 19:19:12 +0000 (11:19 -0800)]
Merge tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- SUNRPC: Handle 0 length opaque XDR object data properly
- Fix a layout segment leak in pnfs_layout_process()
- pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
- pNFS/NFSv4: Improve rejection of out-of-order layouts
- pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
* tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Handle 0 length opaque XDR object data properly
SUNRPC: Move simple_get_bytes and simple_get_netobj into private header
pNFS/NFSv4: Improve rejection of out-of-order layouts
pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
Linus Walleij [Sat, 2 Jan 2021 23:15:10 +0000 (00:15 +0100)]
leds: rt8515: Add Richtek RT8515 LED driver
This adds a driver for the Richtek RT8515 dual channel
torch/flash white LED driver.
This LED driver is found in some mobile phones from
Samsung such as the GT-S7710 and GT-I8190.
A V4L interface is added.
We do not have a proper datasheet for the RT8515 but
it turns out that RT9387A has a public datasheet and
is essentially the same chip. We designed the driver
in accordance with this datasheet. The day someone
needs to drive a RT9387A this driver can probably
easily be augmented to handle that chip too.
Sakari Ailus, Pavel Machek and Andy Shevchenko helped
significantly in getting this driver right.
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: linux-media@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Linus Walleij [Sat, 2 Jan 2021 23:15:09 +0000 (00:15 +0100)]
dt-bindings: leds: Add DT binding for Richtek RT8515
Add a YAML devicetree binding for the Richtek RT8515
dual channel flash/torch LED driver.
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Andrea Righi [Wed, 25 Nov 2020 15:18:22 +0000 (16:18 +0100)]
leds: trigger: fix potential deadlock with libata
We have the following potential deadlock condition:
========================================================
WARNING: possible irq lock inversion dependency detected
5.10.0-rc2+ #25 Not tainted
--------------------------------------------------------
swapper/3/0 just changed the state of lock:
ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200
but this lock took another, HARDIRQ-READ-unsafe lock in the past:
(&trig->leddev_list_lock){.+.?}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&trig->leddev_list_lock);
local_irq_disable();
lock(&host->lock);
lock(&trig->leddev_list_lock);
<Interrupt>
lock(&host->lock);
*** DEADLOCK ***
no locks held by swapper/3/0.
the shortest dependencies between 2nd lock and 1st lock:
-> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 {
HARDIRQ-ON-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
IN-SOFTIRQ-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
kbd_bh+0x9e/0xc0
tasklet_action_common.constprop.0+0xe9/0x100
tasklet_action+0x22/0x30
__do_softirq+0xcc/0x46d
run_ksoftirqd+0x3f/0x70
smpboot_thread_fn+0x116/0x1f0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
SOFTIRQ-ON-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
INITIAL READ USE at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
}
... key at: [<
ffffffff83da4c00>] __key.0+0x0/0x10
... acquired at:
_raw_read_lock+0x42/0x90
led_trigger_blink_oneshot+0x3b/0x90
ledtrig_disk_activity+0x3c/0xa0
ata_qc_complete+0x26/0x450
ata_do_link_abort+0xa3/0xe0
ata_port_freeze+0x2e/0x40
ata_hsm_qc_complete+0x94/0xa0
ata_sff_hsm_move+0x177/0x7a0
ata_sff_pio_task+0xc7/0x1b0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
-> (&host->lock){-...}-{2:2} ops: 69 {
IN-HARDIRQ-W at:
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_bmdma_interrupt+0x27/0x200
__handle_irq_event_percpu+0xd5/0x2b0
handle_irq_event+0x57/0xb0
handle_edge_irq+0x8c/0x230
asm_call_irq_on_stack+0xf/0x20
common_interrupt+0x100/0x1c0
asm_common_interrupt+0x1e/0x40
native_safe_halt+0xe/0x10
arch_cpu_idle+0x15/0x20
default_idle_call+0x59/0x1c0
do_idle+0x22c/0x2c0
cpu_startup_entry+0x20/0x30
start_secondary+0x11d/0x150
secondary_startup_64_no_verify+0xa6/0xab
INITIAL USE at:
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_dev_init+0x54/0xe0
ata_link_init+0x8b/0xd0
ata_port_alloc+0x1f1/0x210
ata_host_alloc+0xf1/0x130
ata_host_alloc_pinfo+0x14/0xb0
ata_pci_sff_prepare_host+0x41/0xa0
ata_pci_bmdma_prepare_host+0x14/0x30
piix_init_one+0x21f/0x600
local_pci_probe+0x48/0x80
pci_device_probe+0x105/0x1c0
really_probe+0x221/0x490
driver_probe_device+0xe9/0x160
device_driver_attach+0xb2/0xc0
__driver_attach+0x91/0x150
bus_for_each_dev+0x81/0xc0
driver_attach+0x1e/0x20
bus_add_driver+0x138/0x1f0
driver_register+0x91/0xf0
__pci_register_driver+0x73/0x80
piix_init+0x1e/0x2e
do_one_initcall+0x5f/0x2d0
kernel_init_freeable+0x26f/0x2cf
kernel_init+0xe/0x113
ret_from_fork+0x1f/0x30
}
... key at: [<
ffffffff83d9fdc0>] __key.6+0x0/0x10
... acquired at:
__lock_acquire+0x9da/0x2370
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_bmdma_interrupt+0x27/0x200
__handle_irq_event_percpu+0xd5/0x2b0
handle_irq_event+0x57/0xb0
handle_edge_irq+0x8c/0x230
asm_call_irq_on_stack+0xf/0x20
common_interrupt+0x100/0x1c0
asm_common_interrupt+0x1e/0x40
native_safe_halt+0xe/0x10
arch_cpu_idle+0x15/0x20
default_idle_call+0x59/0x1c0
do_idle+0x22c/0x2c0
cpu_startup_entry+0x20/0x30
start_secondary+0x11d/0x150
secondary_startup_64_no_verify+0xa6/0xab
This lockdep splat is reported after:
commit
e918188611f0 ("locking: More accurate annotations for read_lock()")
To clarify:
- read-locks are recursive only in interrupt context (when
in_interrupt() returns true)
- after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call
write_lock(&trig->leddev_list_lock) that would be blocked by CPU0
that holds trig->leddev_list_lock in read-mode
- when CPU1 (ata_ac_complete()) tries to read-lock
trig->leddev_list_lock, it would be blocked by the write-lock waiter
on CPU2 (because we are not in interrupt context, so the read-lock is
not recursive)
- at this point if an interrupt happens on CPU0 and
ata_bmdma_interrupt() is executed it will try to acquire host->lock,
that is held by CPU1, that is currently blocked by CPU2, so:
* CPU0 blocked by CPU1
* CPU1 blocked by CPU2
* CPU2 blocked by CPU0
*** DEADLOCK ***
The deadlock scenario is better represented by the following schema
(thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the
detailed explanation of the deadlock condition):
CPU 0: CPU 1: CPU 2:
----- ----- -----
led_trigger_event():
read_lock(&trig->leddev_list_lock);
<workqueue>
ata_hsm_qc_complete():
spin_lock_irqsave(&host->lock);
write_lock(&trig->leddev_list_lock);
ata_port_freeze():
ata_do_link_abort():
ata_qc_complete():
ledtrig_disk_activity():
led_trigger_blink_oneshot():
read_lock(&trig->leddev_list_lock);
// ^ not in in_interrupt() context, so could get blocked by CPU 2
<interrupt>
ata_bmdma_interrupt():
spin_lock_irqsave(&host->lock);
Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so
that no interrupt can happen in between, preventing the deadlock
condition.
Apply the same change to led_trigger_blink_setup() as well, since the
same deadlock scenario can also happen in power_supply_update_bat_leds()
-> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context),
and potentially prevent other similar usages.
Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/
Fixes:
eb25cb9956cc ("leds: convert IDE trigger to common disk trigger")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Zheng Yongjun [Mon, 14 Dec 2020 13:45:45 +0000 (21:45 +0800)]
leds: leds-ariel: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Zheng Yongjun [Wed, 16 Dec 2020 13:16:53 +0000 (21:16 +0800)]
leds: leds-lm3533: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Linus Torvalds [Sun, 31 Jan 2021 01:51:06 +0000 (17:51 -0800)]
Merge tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four cifs patches found in additional testing of the conversion to the
new mount API: three small option processing ones, and one fixing domain
based DFS referrals"
* tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix dfs domain referrals
cifs: returning mount parm processing errors correctly
cifs: fix mounts to subdirectories of target
cifs: ignore auto and noauto options if given
Linus Torvalds [Sun, 31 Jan 2021 01:42:42 +0000 (17:42 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor fixes in drivers. Both changing strings (one in a comment,
one in a module help text) with no code impact"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit
scsi: target: iscsi: Fix typo in comment
Linus Torvalds [Sun, 31 Jan 2021 00:39:36 +0000 (16:39 -0800)]
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC fix from Stafford Horne:
"Fix config dependencies for Litex SOC driver causing issues on um"
* tag 'for-linus' of git://github.com/openrisc/linux:
soc: litex: Properly depend on HAS_IOMEM
Linus Torvalds [Sat, 30 Jan 2021 19:53:14 +0000 (11:53 -0800)]
Merge tag 'devicetree-fixes-for-5.11-2' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Cleanups on properties with standard unit suffixes
- Fix overwriting dma_range_map if there's no 'dma-ranges' property
- Fix a bug when creating a /chosen node from ARM ATAGs
- Add missing properties for TI j721e USB binding
- Several doc reference updates due to DT schema conversions
* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Cleanup standard unit properties
of/device: Update dma_range_map only when dev has valid dma-ranges
ARM: zImage: atags_to_fdt: Fix node names on added root nodes
dt-bindings: usb: j721e: add ranges and dma-coherent props
dt-bindings:iio:adc: update adc.yaml reference
dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
ASoC: audio-graph-card: update audio-graph-card.yaml reference
Linus Torvalds [Sat, 30 Jan 2021 19:48:57 +0000 (11:48 -0800)]
Merge tag 's390-5.11-4' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix max number of VCPUs reported via ultravisor information sysfs
interface.
- Fix memory leaks during vfio-ap resources clean up on KVM pointer
invalidation notification.
- Fix potential specification exception by avoiding unnecessary
interrupts disable after queue reset in vfio-ap.
* tag 's390-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: uv: Fix sysfs max number of VCPUs reporting
s390/vfio-ap: No need to disable IRQ after queue reset
s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated
Linus Torvalds [Sat, 30 Jan 2021 19:46:27 +0000 (11:46 -0800)]
Merge tag 'riscv-for-linus-5.11-rc6' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"A fix to avoid initializing max_mapnr to be too large, which may
manifest on NUMA systems"
* tag 'riscv-for-linus-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup pfn_valid error with wrong max_mapnr
Chinmay Agarwal [Wed, 27 Jan 2021 16:54:54 +0000 (22:24 +0530)]
neighbour: Prevent a dead entry from updating gc_list
Following race condition was detected:
<CPU A, t0> - neigh_flush_dev() is under execution and calls
neigh_mark_dead(n) marking the neighbour entry 'n' as dead.
<CPU B, t1> - Executing: __netif_receive_skb() ->
__netif_receive_skb_core() -> arp_rcv() -> arp_process().arp_process()
calls __neigh_lookup() which takes a reference on neighbour entry 'n'.
<CPU A, t2> - Moves further along neigh_flush_dev() and calls
neigh_cleanup_and_release(n), but since reference count increased in t2,
'n' couldn't be destroyed.
<CPU B, t3> - Moves further along, arp_process() and calls
neigh_update()-> __neigh_update() -> neigh_update_gc_list(), which adds
the neighbour entry back in gc_list(neigh_mark_dead(), removed it
earlier in t0 from gc_list)
<CPU B, t4> - arp_process() finally calls neigh_release(n), destroying
the neighbour entry.
This leads to 'n' still being part of gc_list, but the actual
neighbour structure has been freed.
The situation can be prevented from happening if we disallow a dead
entry to have any possibility of updating gc_list. This is what the
patch intends to achieve.
Fixes:
9c29a2f55ec0 ("neighbor: Fix locking order for gc_list changes")
Signed-off-by: Chinmay Agarwal <chinagar@codeaurora.org>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210127165453.GA20514@chinagar-linux.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zyta Szpak [Thu, 21 Jan 2021 15:52:37 +0000 (16:52 +0100)]
arm64: dts: ls1046a: fix dcfg address range
Dcfg was overlapping with clockgen address space which resulted
in failure in memory allocation for dcfg. According regs description
dcfg size should not be bigger than 4KB.
Signed-off-by: Zyta Szpak <zr@semihalf.com>
Fixes:
8126d88162a5 ("arm64: dts: add QorIQ LS1046A SoC support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
David Howells [Fri, 29 Jan 2021 23:53:50 +0000 (23:53 +0000)]
rxrpc: Fix deadlock around release of dst cached on udp tunnel
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst
from an incoming packet to get stolen and attached to the UDP socket from
whence it is leaked when that socket is closed.
When a network namespace is removed, the wait for dst records to be cleaned
up happens before the cleanup of the rxrpc and UDP socket, meaning that the
wait never finishes.
Fix this by moving the rxrpc (and, by dependence, the afs) private
per-network namespace registrations to the device group rather than subsys
group. This allows cached rxrpc local endpoints to be cleared and their
UDP sockets closed before we try waiting for the dst records.
The symptom is that lines looking like the following:
unregister_netdevice: waiting for lo to become free
get emitted at regular intervals after running something like the
referenced syzbot test.
Thanks to Vadim for tracking this down and work out the fix.
Reported-by: syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com
Reported-by: Vadim Fedorenko <vfedorenko@novek.ru>
Fixes:
5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Thu, 28 Jan 2021 22:01:54 +0000 (23:01 +0100)]
r8169: work around RTL8125 UDP hw bug
It was reported that on RTL8125 network breaks under heavy UDP load,
e.g. torrent traffic ([0], from comment 27). Realtek confirmed a hw bug
and provided me with a test version of the r8125 driver including a
workaround. Tests confirmed that the workaround fixes the issue.
I modified the original version of the workaround to meet mainline
code style.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=209839
v2:
- rebased to net
v3:
- make rtl_skb_is_udp() more robust and use skb_header_pointer()
to access the ip(v6) header
v4:
- remove dependency on ptp_classify.h
- replace magic number with offsetof(struct udphdr, len)
Fixes:
f1bce4ad2f1c ("r8169: add support for RTL8125")
Tested-by: xplo <xplo.bn@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/6e453d49-1801-e6de-d5f7-d7e6c7526c8f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ahmed S. Darwish [Thu, 28 Jan 2021 19:48:02 +0000 (20:48 +0100)]
net: arcnet: Fix RESET flag handling
The main arcnet interrupt handler calls arcnet_close() then
arcnet_open(), if the RESET status flag is encountered.
This is invalid:
1) In general, interrupt handlers should never call ->ndo_stop() and
->ndo_open() functions. They are usually full of blocking calls and
other methods that are expected to be called only from drivers
init and exit code paths.
2) arcnet_close() contains a del_timer_sync(). If the irq handler
interrupts the to-be-deleted timer, del_timer_sync() will just loop
forever.
3) arcnet_close() also calls tasklet_kill(), which has a warning if
called from irq context.
4) For device reset, the sequence "arcnet_close(); arcnet_open();" is
not complete. Some children arcnet drivers have special init/exit
code sequences, which then embed a call to arcnet_open() and
arcnet_close() accordingly. Check drivers/net/arcnet/com20020.c.
Run the device RESET sequence from a scheduled workqueue instead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210128194802.727770-1-a.darwish@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rob Herring [Thu, 28 Jan 2021 19:45:15 +0000 (13:45 -0600)]
dt-bindings: Cleanup standard unit properties
Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.
adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
Wang ShaoBo [Thu, 28 Jan 2021 12:44:27 +0000 (20:44 +0800)]
kretprobe: Avoid re-registration of the same kretprobe earlier
Our system encountered a re-init error when re-registering same kretprobe,
where the kretprobe_instance in rp->free_instances is illegally accessed
after re-init.
Implementation to avoid re-registration has been introduced for kprobe
before, but lags for register_kretprobe(). We must check if kprobe has
been re-registered before re-initializing kretprobe, otherwise it will
destroy the data struct of kretprobe registered, which can lead to memory
leak, system crash, also some unexpected behaviors.
We use check_kprobe_rereg() to check if kprobe has been re-registered
before running register_kretprobe()'s body, for giving a warning message
and terminate registration process.
Link: https://lkml.kernel.org/r/20210128124427.2031088-1-bobo.shaobowang@huawei.com
Cc: stable@vger.kernel.org
Fixes:
1f0ab40976460 ("kprobes: Prevent re-registration of the same kprobe")
[ The above commit should have been done for kretprobes too ]
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Fri, 29 Jan 2021 21:59:24 +0000 (13:59 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses.
- Do not blindly trust the DMA masks from ACPI/IORT.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Do not blindly trust DMA masks from firmware
arm64: Fix kernel address detection of __is_lm_address()
Linus Torvalds [Fri, 29 Jan 2021 21:54:40 +0000 (13:54 -0800)]
Merge tag 'for-5.11-rc5-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes for a late rc:
- fix lockdep complaint on 32bit arches and also remove an unsafe
memory use due to device vs filesystem lifetime
- two fixes for free space tree:
* race during log replay and cache rebuild, now more likely to
happen due to changes in this dev cycle
* possible free space tree corruption with online conversion
during initial tree population"
* tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix log replay failure due to race with space cache rebuild
btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch
btrfs: fix possible free space tree corruption with online conversion
Linus Torvalds [Fri, 29 Jan 2021 21:50:06 +0000 (13:50 -0800)]
Merge tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"All over the place fixes for this release:
- blk-cgroup iteration teardown resched fix (Baolin)
- NVMe pull request from Christoph:
- add another Write Zeroes quirk (Chaitanya Kulkarni)
- handle a no path available corner case (Daniel Wagner)
- use the proper RCU aware list_add helper (Chao Leng)
- bcache regression fix (Coly)
- bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12,
but for now, we'll make it IRQ safe (Damien)
- null_blk zoned init fix (Damien)
- add_partition() error handling fix (Dinghao)
- s390 dasd kobject fix (Jan)
- nbd fix for freezing queue while adding connections (Josef)
- tag queueing regression fix (Ming)
- revert of a patch that inadvertently meant that we regressed write
performance on raid (Maxim)"
* tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
null_blk: cleanup zoned mode initialization
nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head
nvme-multipath: Early exit if no path is available
nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device
bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES
block: fix bd_size_lock use
blk-cgroup: Use cond_resched() when destroy blkgs
Revert "block: simplify set_init_blocksize" to regain lost performance
nbd: freeze the queue while we're adding connections
s390/dasd: Fix inconsistent kobject removal
block: Fix an error handling in add_partition
blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue
Linus Torvalds [Fri, 29 Jan 2021 21:47:47 +0000 (13:47 -0800)]
Merge tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"We got the cancelation story sorted now, so for all intents and
purposes, this should be it for 5.11 outside of any potential little
fixes that may come in. This contains:
- task_work task state fixes (Hao, Pavel)
- Cancelation fixes (me, Pavel)
- Fix for an inflight req patch in this release (Pavel)
- Fix for a lock deadlock issue (Pavel)"
* tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
io_uring: reinforce cancel on flush during exit
io_uring: fix sqo ownership false positive warning
io_uring: fix list corruption for splice file_get
io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE
io_uring: fix wqe->lock/completion_lock deadlock
io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE
io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE
io_uring: only call io_cqring_ev_posted() if events were posted
io_uring: if we see flush on exit, cancel related tasks
David Gow [Wed, 27 Jan 2021 03:36:04 +0000 (19:36 -0800)]
soc: litex: Properly depend on HAS_IOMEM
The LiteX SOC controller driver makes use of IOMEM functions like
devm_platform_ioremap_resource(), which are only available if
CONFIG_HAS_IOMEM is defined.
This causes the driver to be enable under make ARCH=um allyesconfig,
even though it won't build.
By adding a dependency on HAS_IOMEM, the driver will not be enabled on
architectures which don't support it.
Fixes:
22447a99c97e ("drivers/soc/litex: add LiteX SoC Controller driver")
Signed-off-by: David Gow <davidgow@google.com>
[shorne@gmail.com: Fix typo in commit message pointed out in review]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Linus Torvalds [Fri, 29 Jan 2021 21:32:05 +0000 (13:32 -0800)]
Merge tag 'iommu-fixes-v5.11-rc5' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- AMD IOMMU fix to make sure features are detected before they are
queried.
- Intel IOMMU address alignment check fix for an IOLTB flushing
command.
- Performance fix for Intel IOMMU to make sure the code does not do
full IOTLB flushes all the time. Those flushes are very expensive
on emulated IOMMUs.
* tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Do not use flush-queue when caching-mode is on
iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid()
iommu/amd: Use IVHD EFR for early initialization of IOMMU features
Linus Torvalds [Fri, 29 Jan 2021 21:30:09 +0000 (13:30 -0800)]
Merge tag 'pm-5.11-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a deadlock in the 'kexec jump' code and address a possible
hibernation image creation issue.
Specifics:
- Fix a deadlock caused by attempting to acquire the same mutex twice
in a row in the "kexec jump" code (Baoquan He)
- Modify the hibernation image saving code to flush the unwritten
data to the swap storage later so as to avoid failing to write the
image signature which is possible in some cases (Laurent Badel)"
* tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: flush swap writer after marking
kernel: kexec: remove the lock operation of system_transition_mutex
Linus Torvalds [Fri, 29 Jan 2021 21:23:21 +0000 (13:23 -0800)]
Merge tag 'acpi-5.11-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the handling of notifications in the ACPI thermal driver and
address a device enumeration issue leading to the presence of multiple
'MODALIAS=' entries in one uevent file in sysfs in some cases.
Specifics:
- Modify the ACPI thermal driver to avoid evaluating _TMP directly in
its Notify () handler callback and running too many thermal checks
for one thermal zone at the same time so as to address a work item
accumulation issue observed on some systems that fail to shut down
as a result of it (Rafael Wysocki)
- Modify the ACPI uevent file creation code to avoid putting multiple
'MODALIAS=' entries in one uevent file in sysfs which breaks
systemd-udevd (Kai-Heng Feng)"
* tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Do not call acpi_thermal_check() directly
ACPI: sysfs: Prefer "compatible" modalias
Linus Torvalds [Fri, 29 Jan 2021 21:18:23 +0000 (13:18 -0800)]
Merge tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes for graphics, nothing too major, nouveau has a few
regression fixes for various fallout from header changes previously,
vc4 has two fixes, two amdgpu, and a smattering of i915 fixes.
All seems on course for a quieter rc7, fingers crossed.
nouveau:
- fix svm init conditions
- fix nv50 modesetting regression
- fix cursor plane modifiers
- fix > 64x64 cursor regression
vc4:
- Fix LBM size calculation
- Fix high resolutions for hvs5
i915:
- Fix ICL MG PHY vswing
- Fix subplatform handling
- Fix selftest memleak
- Clear CACHE_MODE prior to clearing residuals
- Always flush the active worker before returning from the wait
- Always try to reserve GGTT address 0x0
amdgpu:
- Fix a fan control regression on some boards
- Fix clang warning"
* tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
drm/nouveau/kms/nv50-: Report max cursor size to userspace
drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices
drm/nouveau/dispnv50: Restore pushing of all data.
amdgpu: fix clang build warning
Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"
drm/i915/gt: Always try to reserve GGTT address 0x0
drm/i915: Always flush the active worker before returning from the wait
drm/i915/selftest: Fix potential memory leak
drm/i915: Check for all subplatform bits
drm/i915: Fix ICL MG PHY vswing handling
drm/i915/gt: Clear CACHE_MODE prior to clearing residuals
drm/vc4: Correct POS1_SCL for hvs5
drm/vc4: Correct lbm size and calculation
drm/nouveau/nvif: fix method count when pushing an array
Linus Torvalds [Fri, 29 Jan 2021 20:28:20 +0000 (12:28 -0800)]
tty: avoid using vfs_iocb_iter_write() for redirected console writes
It turns out that the vfs_iocb_iter_{read,write}() functions are
entirely broken, and don't actually use the passed-in file pointer for
IO - only for the preparatory work (permission checking and for the
write_iter function lookup).
That worked fine for overlayfs, which always builds the new iocb with
the same file pointer that it passes in, but in the general case it ends
up doing nonsensical things (and could cause an iterator call that
doesn't even match the passed-in file pointer).
This subtly broke the tty conversion to write_iter in commit
9bb48c82aced ("tty: implement write_iter"), because the console
redirection didn't actually end up redirecting anything, since the
passed-in file pointer was basically ignored, and the actual write was
done with the original non-redirected console tty after all.
The main visible effect of this is that the console messages were no
longer logged to /var/log/boot.log during graphical boot.
Fix the issue by simply not using the vfs write "helper" function at
all, and just redirecting the write entirely internally to the tty
layer. Do the target writability permission checks when actually
registering the target tty with TIOCCONS instead of at write time.
Fixes:
9bb48c82aced ("tty: implement write_iter")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / platform / kernel / linux-rpi.git / log