bonding: fix ns validation on backup slaves

[ Upstream commit 4598380f9c548aa161eb4e990a1583f0a7d1e0d7 ]

When arp_validate is set to 2, 3, or 6, validation is performed for
backup slaves as well. As stated in the bond documentation, validation
involves checking the broadcast ARP request sent out via the active
slave. This helps determine which slaves are more likely to function in
the event of an active slave failure.

However, when the target is an IPv6 address, the NS message sent from
the active interface is not checked on backup slaves. Additionally,
based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr
when checking the NS message.

Note that when checking the NS message, the destination address is a
multicast address. Therefore, we must convert the target address to
solicited multicast in the bond_get_targets_ip6() function.

Prior to the fix, the backup slaves had a mii status of "down", but
after the fix, all of the slaves' mii status was updated to "UP".

Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: restrict net.ipv4.tcp_app_win

[ Upstream commit dc5110c2d959c1707e12df5f792f41d90614adaa ]

UBSAN: shift-out-of-bounds in net/ipv4/tcp_input.c:555:23
shift exponent 255 is too large for 32-bit type 'int'
CPU: 1 PID: 7907 Comm: ssh Not tainted 6.3.0-rc4-00161-g62bad54b26db-dirty #206
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x136/0x150
 __ubsan_handle_shift_out_of_bounds+0x21f/0x5a0
 tcp_init_transfer.cold+0x3a/0xb9
 tcp_finish_connect+0x1d0/0x620
 tcp_rcv_state_process+0xd78/0x4d60
 tcp_v4_do_rcv+0x33d/0x9d0
 __release_sock+0x133/0x3b0
 release_sock+0x58/0x1b0

'maxwin' is int, shifting int for 32 or more bits is undefined behaviour.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

niu: Fix missing unwind goto in niu_alloc_channels()

[ Upstream commit 8ce07be703456acb00e83d99f3b8036252c33b02 ]

Smatch reports: drivers/net/ethernet/sun/niu.c:4525
niu_alloc_channels() warn: missing unwind goto?

If niu_rbr_fill() fails, then we are directly returning 'err' without
freeing the channels.

Fix this by changing direct return to a goto 'out_err'.

Fixes: a3138df9f20e ("[NIU]: Add Sun Neptune ethernet driver.")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Advertise ID_AA64PFR0_EL1.CSV2/3 to protected VMs

[ Upstream commit e81625218bf7986ba1351a98c43d346b15601d26 ]

The existing pKVM code attempts to advertise CSV2/3 using values
initialized to 0, but never set. To advertise CSV2/3 to protected
guests, pass the CSV2/3 values to hyp when initializing hyp's
view of guests' ID_AA64PFR0_EL1.

Similar to non-protected KVM, these are system-wide, rather than
per cpu, for simplicity.

Fixes: 6c30bfb18d0b ("KVM: arm64: Add handlers for protected VM System Registers")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20230404152321.413064-1-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Initialise hypervisor copies of host symbols unconditionally

[ Upstream commit 6c165223e9a6384aa1e934b90f2650e71adb972a ]

The nVHE object at EL2 maintains its own copies of some host variables
so that, when pKVM is enabled, the host cannot directly modify the
hypervisor state. When running in normal nVHE mode, however, these
variables are still mirrored at EL2 but are not initialised.

Initialise the hypervisor symbols from the host copies regardless of
pKVM, ensuring that any reference to this data at EL2 with normal nVHE
will return a sensibly initialised value.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-16-will@kernel.org
Stable-dep-of: e81625218bf7 ("KVM: arm64: Advertise ID_AA64PFR0_EL1.CSV2/3 to protected VMs")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, arm64: Fixed a BTI error on returning to patched function

[ Upstream commit 738a96c4a8c36950803fdd27e7c30aca92dccefd ]

When BPF_TRAMP_F_CALL_ORIG is set, BPF trampoline uses BLR to jump
back to the instruction next to call site to call the patched function.
For BTI-enabled kernel, the instruction next to call site is usually
PACIASP, in this case, it's safe to jump back with BLR. But when
the call site is not followed by a PACIASP or bti, a BTI exception
is triggered.

Here is a fault log:

 Unhandled 64-bit el1h sync exception on CPU0, ESR 0x0000000034000002 -- BTI
 CPU: 0 PID: 263 Comm: test_progs Tainted: GF
 Hardware name: linux,dummy-virt (DT)
 pstate: 40400805 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c)
 pc : bpf_fentry_test1+0xc/0x30
 lr : bpf_trampoline_6442573892_0+0x48/0x1000
 sp : ffff80000c0c3a50
 x29: ffff80000c0c3a90 x28: ffff0000c2e6c080 x27: 0000000000000000
 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000050
 x23: 0000000000000000 x22: 0000ffffcfd2a7f0 x21: 000000000000000a
 x20: 0000ffffcfd2a7f0 x19: 0000000000000000 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcfd2a7f0
 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000000 x10: ffff80000914f5e4 x9 : ffff8000082a1528
 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0101010101010101
 x5 : 0000000000000000 x4 : 00000000fffffff2 x3 : 0000000000000001
 x2 : ffff8001f4b82000 x1 : 0000000000000000 x0 : 0000000000000001
 Kernel panic - not syncing: Unhandled exception
 CPU: 0 PID: 263 Comm: test_progs Tainted: GF
 Hardware name: linux,dummy-virt (DT)
 Call trace:
  dump_backtrace+0xec/0x144
  show_stack+0x24/0x7c
  dump_stack_lvl+0x8c/0xb8
  dump_stack+0x18/0x34
  panic+0x1cc/0x3ec
  __el0_error_handler_common+0x0/0x130
  el1h_64_sync_handler+0x60/0xd0
  el1h_64_sync+0x78/0x7c
  bpf_fentry_test1+0xc/0x30
  bpf_fentry_test1+0xc/0x30
  bpf_prog_test_run_tracing+0xdc/0x2a0
  __sys_bpf+0x438/0x22a0
  __arm64_sys_bpf+0x30/0x54
  invoke_syscall+0x78/0x110
  el0_svc_common.constprop.0+0x6c/0x1d0
  do_el0_svc+0x38/0xe0
  el0_svc+0x30/0xd0
  el0t_64_sync_handler+0x1ac/0x1b0
  el0t_64_sync+0x1a0/0x1a4
 Kernel Offset: disabled
 CPU features: 0x0000,00034c24,f994fdab
 Memory Limit: none

And the instruction next to call site of bpf_fentry_test1 is ADD,
not PACIASP:

<bpf_fentry_test1>:
bti     c
nop
nop
add     w0, w0, #0x1
paciasp

For BPF prog, JIT always puts a PACIASP after call site for BTI-enabled
kernel, so there is no problem. To fix it, replace BLR with RET to bypass
the branch target check.

Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64")
Reported-by: Florent Revest <revest@chromium.org>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Florent Revest <revest@chromium.org>
Acked-by: Florent Revest <revest@chromium.org>
Link: https://lore.kernel.org/bpf/20230401234144.3719742-1-xukuohai@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p/xen : Fix use after free bug in xen_9pfs_front_remove due to race condition

[ Upstream commit ea4f1009408efb4989a0f139b70fb338e7f687d0 ]

In xen_9pfs_front_probe, it calls xen_9pfs_front_alloc_dataring
to init priv->rings and bound &ring->work with p9_xen_response.

When it calls xen_9pfs_front_event_handler to handle IRQ requests,
it will finally call schedule_work to start the work.

When we call xen_9pfs_front_remove to remove the driver, there
may be a sequence as follows:

Fix it by finishing the work before cleanup in xen_9pfs_front_free.

Note that, this bug is found by static analysis, which might be
false positive.

CPU0                  CPU1

                     |p9_xen_response
xen_9pfs_front_remove|
  xen_9pfs_front_free|
kfree(priv)          |
//free priv          |
                     |p9_tag_lookup
                     |//use priv->client

Fixes: 71ebd71921e4 ("xen/9pfs: connect to the backend")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: apple-admac: Fix 'current_tx' not getting freed

[ Upstream commit d9503be5a100c553731c0e8a82c7b4201e8a970c ]

In terminate_all we should queue up all submitted descriptors to be
freed. We do that for the content of the 'issued' and 'submitted' lists,
but the 'current_tx' descriptor falls through the cracks as it's
removed from the 'issued' list once it gets assigned to be the current
descriptor. Explicitly queue up freeing of the 'current_tx' descriptor
to address a memory leak that is otherwise present.

Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-2-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: apple-admac: Set src_addr_widths capability

[ Upstream commit 6e96adcaa7a29827ac8ee8df290a44957a4823ec ]

Add missing setting of 'src_addr_widths', which is the same as for the
other direction.

Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-3-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: apple-admac: Handle 'global' interrupt flags

[ Upstream commit a288fd158fbf85c06a9ac01cecabf97ac5d962e7 ]

In addition to TX channel and RX channel interrupt flags there's
another class of 'global' interrupt flags with unknown semantics. Those
weren't being handled up to now, and they are the suspected cause of
stuck IRQ states that have been sporadically occurring. Check the global
flags and clear them if raised.

Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch, bpf: Fix jit to skip speculation barrier opcode

[ Upstream commit a6f6a95f25803500079513780d11a911ce551d76 ]

Just skip the opcode(BPF_ST | BPF_NOSPEC) in the BPF JIT instead of
failing to JIT the entire program, given LoongArch currently has no
couterpart of a speculation barrier instruction. To verify the issue,
use the ltp testcase as shown below.

Also, Wang says:

  I can confirm there's currently no speculation barrier equivalent
  on LonogArch. (Loongson says there are builtin mitigations for
  Spectre-V1 and V2 on their chips, and AFAIK efforts to port the
  exploits to mips/LoongArch have all failed a few years ago.)

Without this patch:

  $ ./bpf_prog02
  [...]
  bpf_common.c:123: TBROK: Failed verification: ??? (524)
  [...]
  Summary:
  passed   0
  failed   0
  broken   1
  skipped  0
  warnings 0

With this patch:

  $ ./bpf_prog02
  [...]
  Summary:
  passed   0
  failed   0
  broken   0
  skipped  0
  warnings 0

Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: WANG Xuerui <git@xen0n.name>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/bpf/20230328071335.2664966-1-guodongtai@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp

[ Upstream commit 580031ff9952b7dbf48dedba6b56a100ae002bef ]

While reviewing the udp-iter batching patches, noticed the bpf_iter_tcp
calling sock_put() is incorrect. It should call sock_gen_put instead
because bpf_iter_tcp is iterating the ehash table which has the req sk
and tw sk. This patch replaces all sock_put with sock_gen_put in the
bpf_iter_tcp codepath.

Fixes: 04c7820b776f ("bpf: tcp: Bpf iter batching and lock_sock")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230328004232.2134233-1-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: Allow UD qp_type to join multicast only

[ Upstream commit 58e84f6b3e84e46524b7e5a916b53c1ad798bc8f ]

As for multicast:
- The SIDR is the only mode that makes sense;
- Besides PS_UDP, other port spaces like PS_IB is also allowed, as it is
  UD compatible. In this case qkey also needs to be set [1].

This patch allows only UD qp_type to join multicast, and set qkey to
default if it's not set, to fix an uninit-value error: the ib->rec.qkey
field is accessed without being initialized.

=====================================================
BUG: KMSAN: uninit-value in cma_set_qkey drivers/infiniband/core/cma.c:510 [inline]
BUG: KMSAN: uninit-value in cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570
 cma_set_qkey drivers/infiniband/core/cma.c:510 [inline]
 cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570
 cma_iboe_join_multicast drivers/infiniband/core/cma.c:4782 [inline]
 rdma_join_multicast+0x2b83/0x30a0 drivers/infiniband/core/cma.c:4814
 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479
 ucma_join_multicast+0x1e3/0x250 drivers/infiniband/core/ucma.c:1546
 ucma_write+0x639/0x6d0 drivers/infiniband/core/ucma.c:1732
 vfs_write+0x8ce/0x2030 fs/read_write.c:588
 ksys_write+0x28c/0x520 fs/read_write.c:643
 __do_sys_write fs/read_write.c:655 [inline]
 __se_sys_write fs/read_write.c:652 [inline]
 __ia32_sys_write+0xdb/0x120 fs/read_write.c:652
 do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline]
 __do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180
 do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205
 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Local variable ib.i created at:
cma_iboe_join_multicast drivers/infiniband/core/cma.c:4737 [inline]
rdma_join_multicast+0x586/0x30a0 drivers/infiniband/core/cma.c:4814
ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479

CPU: 0 PID: 29874 Comm: syz-executor.3 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
=====================================================

[1] https://lore.kernel.org/linux-rdma/20220117183832.GD84788@nvidia.com/

Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join")
Reported-by: syzbot+8fcbb77276d43cc8b693@syzkaller.appspotmail.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/58a4a98323b5e6b1282e83f6b76960d06e43b9fa.1679309909.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rs9: Fix suspend/resume

[ Upstream commit 632e04739c8f45c2d9ca4d4c5bd18d80c2ac9296 ]

Disabling the cache in commit 2ff4ba9e3702 ("clk: rs9: Fix I2C accessors")
without removing cache synchronization in resume path results in a
kernel panic as map->cache_ops is unset, due to REGCACHE_NONE.
Enable flat cache again to support resume again. num_reg_defaults_raw
is necessary to read the cache defaults from hardware. Some registers
are strapped in hardware and cannot be provided in software.

Fixes: 2ff4ba9e3702 ("clk: rs9: Fix I2C accessors")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230310074940.3475703-1-alexander.stein@ew.tq-group.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/erdma: Defer probing if netdevice can not be found

[ Upstream commit 6bd1bca858f1734a75572a788213d1e1143f2f0a ]

ERDMA device may be probed before its associated netdevice, returning
-EPROBE_DEFER allows OS try to probe erdma device later.

Fixes: d55e6fb4803c ("RDMA/erdma: Add the erdma module")
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230320084652.16807-5-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/erdma: Inline mtt entries into WQE if supported

[ Upstream commit 0dd83a4d7756713f81990d6c5547500f212a1190 ]

The max inline mtt count supported is ERDMA_MAX_INLINE_MTT_ENTRIES.
When mr->mem.mtt_nents == ERDMA_MAX_INLINE_MTT_ENTRIES, inline mtt
is also supported, fix it.

Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230320084652.16807-4-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/erdma: Update default EQ depth to 4096 and max_send_wr to 8192

[ Upstream commit 6256aa9ae955d10ec73a434533ca62034eff1b76 ]

Max EQ depth of hardware is 32K, the current default EQ depth is too small
for some applications, so change the default depth to 4096.
Max send WRs the hardware can support is 8K, but the driver limits the
value to 4K. Remove this limitation.

Fixes: be3cff0f242d ("RDMA/erdma: Add the hardware related definitions")
Fixes: db23ae64caac ("RDMA/erdma: Add verbs header file")
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230320084652.16807-3-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Add support for 400G_8X lane speed

[ Upstream commit 88c9483faf15ada14eca82714114656893063458 ]

Currently, when driver queries PTYS to report which link speed is being
used on its RoCE ports, it does not check the case of having 400Gbps
transmitted over 8 lanes. Thus it fails to report the said speed and
instead it defaults to report 10G over 4 lanes.

Add a check for the said speed when querying PTYS and report it back
correctly when needed.

Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/ec9040548d119d22557d6a4b4070d6f421701fd4.1678973994.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Add ipv4 check to irdma_find_listener()

[ Upstream commit e4522c097ec10f23ea0933e9e69d4fa9d8ae9441 ]

Add ipv4 check to irdma_find_listener(). Otherwise the function
incorrectly finds and returns a listener with a different addr family for
the zero IP addr, if a listener with a zero IP addr and the same port as
the one searched for has already been created.

Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230315145231.931-5-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Increase iWARP CM default rexmit count

[ Upstream commit 8385a875c9eecc429b2f72970efcbb0e5cb5b547 ]

When running perftest with large number of connections in iWARP mode, the
passive side could be slow to respond. Increase the rexmit counter default
to allow scaling connections.

Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230315145231.931-4-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Fix memory leak of PBLE objects

[ Upstream commit b69a6979dbaa2453675fe9c71bdc2497fedb11f9 ]

On rmmod of irdma, the PBLE object memory is not being freed. PBLE object
memory are not statically pre-allocated at function initialization time
unlike other HMC objects. PBLEs objects and the Segment Descriptors (SD)
for it can be dynamically allocated during scale up and SD's remain
allocated till function deinitialization.

Fix this leak by adding IRDMA_HMC_IW_PBLE to the iw_hmc_obj_types[] table
and skip pbles in irdma_create_hmc_obj but not in irdma_del_hmc_objects().

Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230315145231.931-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Do not generate SW completions for NOPs

[ Upstream commit 30ed9ee9a10a90ae719dcfcacead1d0506fa45ed ]

Currently, artificial SW completions are generated for NOP wqes which can
generate unexpected completions with wr_id = 0. Skip the generation of
artificial completions for NOPs.

Fixes: 81091d7696ae ("RDMA/irdma: Add SW mechanism to generate completions on error")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230315145231.931-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sprd: set max_register according to mapping range

[ Upstream commit 47d43086531f10539470a63e8ad92803e686a3dd ]

In sprd clock driver, regmap_config.max_register was set to a fixed value
which is likely larger than the address range configured in device tree,
when reading registers through debugfs it would cause access violation.

Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20230316023624.758204-1-chunyan.zhang@unisoc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/dsi: fix DSS CTL register offsets for TGL+

commit 6b8446859c971a5783a2cdc90adf32e64de3bd23 upstream.

On TGL+ the DSS control registers are at different offsets, and there's
one per pipe. Fix the offsets to fix dual link DSI for TGL+.

There would be helpers for this in the DSC code, but just do the quick
fix now for DSI. Long term, we should probably move all the DSS handling
into intel_vdsc.c, so exporting the helpers seems counter-productive.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8232
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301151409.1581574-1-jani.nikula@intel.com
(cherry picked from commit 1a62dd9895dca78bee28bba3a36f08836fdd143d)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: set_con2fb_map needs to set con2fb_map!

commit fffb0b52d5258554c645c966c6cbef7de50b851d upstream.

I got really badly confused in d443d9386472 ("fbcon: move more common
code into fb_open()") because we set the con2fb_map before the failure
points, which didn't look good.

But in trying to fix that I moved the assignment into the wrong path -
we need to do it for _all_ vc we take over, not just the first one
(which additionally requires the call to con2fb_acquire_newinfo).

I've figured this out because of a KASAN bug report, where the
fbcon_registered_fb and fbcon_display arrays went out of sync in
fbcon_mode_deleted() because the con2fb_map pointed at the old
fb_info, but the modes and everything was updated for the new one.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: d443d9386472 ("fbcon: move more common code into fb_open()")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: Fix error paths in set_con2fb_map

commit edf79dd2172233452ff142dcc98b19d955fc8974 upstream.

This is a regressoin introduced in b07db3958485 ("fbcon: Ditch error
handling for con2fb_release_oldinfo"). I failed to realize what the if
(!err) checks. The mentioned commit was dropping the
con2fb_release_oldinfo() return value but the if (!err) was also
checking whether the con2fb_acquire_newinfo() function call above
failed or not.

Fix this with an early return statement.

Note that there's still a difference compared to the orginal state of
the code, the below lines are now also skipped on error:

if (!search_fb_in_map(info_idx))
info_idx = newidx;

These are only needed when we've actually thrown out an old fb_info
from the console mappings, which only happens later on.

Also move the fbcon_add_cursor_work() call into the same if block,
it's all protected by console_lock so doesn't matter when we set up
the blinking cursor delayed work anyway. This further simplifies the
control flow and allows us to ditch the found local variable.

v2: Clarify commit message (Javier)

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: b07db3958485 ("fbcon: Ditch error handling for con2fb_release_oldinfo")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: PMU: Restore the guest's EL0 event counting after migration

commit f9ea835e99bc8d049bf2a3ec8fa5a7cb4fcade23 upstream.

Currently, with VHE, KVM enables the EL0 event counting for the
guest on vcpu_load() or KVM enables it as a part of the PMU
register emulation process, when needed.  However, in the migration
case (with VHE), the same handling is lacking, as vPMU register
values that were restored by userspace haven't been propagated yet
(the PMU events haven't been created) at the vcpu load-time on the
first KVM_RUN (kvm_vcpu_pmu_restore_guest() called from vcpu_load()
on the first KVM_RUN won't do anything as events_{guest,host} of
kvm_pmu_events are still zero).

So, with VHE, enable the guest's EL0 event counting on the first
KVM_RUN (after the migration) when needed.  More specifically,
have kvm_pmu_handle_pmcr() call kvm_vcpu_pmu_restore_guest()
so that kvm_pmu_handle_pmcr() on the first KVM_RUN can take
care of it.

Fixes: d0c94c49792c ("KVM: arm64: Restore PMU configuration on first run")
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20230329023944.2488484-1-reijiw@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: stm32_fmc2: use timings.mode instead of checking tRC_min

commit ddbb664b6ab8de7dffa388ae0c88cd18616494e5 upstream.

Use timings.mode value instead of checking tRC_min timing
for EDO mode support.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Cc: stable@vger.kernel.org #v5.10+
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230328155819.225521-3-christophe.kerello@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: stm32_fmc2: remove unsupported EDO mode

commit f71e0e329c152c7f11ddfd97ffc62aba152fad3f upstream.

Remove the EDO mode support from as the FMC2 controller does not
support the feature.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Cc: stable@vger.kernel.org #v5.4+
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230328155819.225521-2-christophe.kerello@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: meson: fix bitmask for length in command word

commit 93942b70461574ca7fc3d91494ca89b16a4c64c7 upstream.

Valid mask is 0x3FFF, without this patch the following problems were
found:

1) [    0.938914] Could not find a valid ONFI parameter page, trying
                  bit-wise majority to recover it
   [    0.947384] ONFI parameter recovery failed, aborting

2) Read with disabled ECC mode was broken.

Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/3794ffbf-dfea-e96f-1f97-fe235b005e19@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtdblock: tolerate corrected bit-flips

commit 0c3089601f064d80b3838eceb711fcac04bceaad upstream.

mtd_read() may return -EUCLEAN in case of corrected bit-flips.This
particular condition should not be treated like an error.

Signed-off-by: Bang Li <libang.linuxer@gmail.com>
Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()")
Cc: <stable@vger.kernel.org> # v3.7
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230328163012.4264-1-libang.linuxer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace

commit 6fd33a3333c7916689b8f051a185defe4dd515b0 upstream.

This is an oversight from dc5bdb68b5b3 ("drm/fb-helper: Fix vt
restore") - I failed to realize that nasty userspace could set this.

It's not pretty to mix up kernel-internal and userspace uapi flags
like this, but since the entire fb_var_screeninfo structure is uapi
we'd need to either add a new parameter to the ->fb_set_par callback
and fb_set_par() function, which has a _lot_ of users. Or some other
fairly ugly side-channel int fb_info. Neither is a pretty prospect.

Instead just correct the issue at hand by filtering out this
kernel-internal flag in the ioctl handling code.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: dc5bdb68b5b3 ("drm/fb-helper: Fix vt restore")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: shlomo@fastmail.com
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Qiujun Huang <hqjagain@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: linux-fbdev@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Shigeru Yoshida <syoshida@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404193934.472457-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix fast csum implementation detection

commit 68d99ab0e9221ef54506f827576c5a914680eeaf upstream.

The BTRFS_FS_CSUM_IMPL_FAST flag is currently set whenever a non-generic
crc32c is detected, which is the incorrect check if the file system uses
a different checksumming algorithm.  Refactor the code to only check
this if crc32c is actually used.  Note that in an ideal world the
information if an algorithm is hardware accelerated or not should be
provided by the crypto API instead, but that's left for another day.

CC: stable@vger.kernel.org # 5.4.x: c8a5f8ca9a9c: btrfs: print checksum type and implementation at mount time
CC: stable@vger.kernel.org # 5.4.x
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: restore the thread_pool= behavior in remount for the end I/O workqueues

commit 40fac6472f22a59f5694496e179988ab4a1dfe07 upstream.

Commit d7b9416fe5c5 ("btrfs: remove btrfs_end_io_wq") converted the read
and I/O handling from btrfs_workqueues to Linux workqueues, and as part
of that lost the code to apply the thread_pool= based max_active limit
on remount.  Restore it.

Fixes: d7b9416fe5c5 ("btrfs: remove btrfs_end_io_wq")
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_conn: Fix possible UAF

commit 5dc7d23e167e2882ef118456ceccd57873e876d8 upstream.

This fixes the following trace:

==================================================================
BUG: KASAN: slab-use-after-free in hci_conn_del+0xba/0x3a0
Write of size 8 at addr ffff88800208e9c8 by task iso-tester/31

CPU: 0 PID: 31 Comm: iso-tester Not tainted 6.3.0-rc2-g991aa4a69a47
 #4716
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc36
04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x1d/0x70
 print_report+0xce/0x610
 ? __virt_addr_valid+0xd4/0x150
 ? hci_conn_del+0xba/0x3a0
 kasan_report+0xdd/0x110
 ? hci_conn_del+0xba/0x3a0
 hci_conn_del+0xba/0x3a0
 hci_conn_hash_flush+0xf2/0x120
 hci_dev_close_sync+0x388/0x920
 hci_unregister_dev+0x122/0x260
 vhci_release+0x4f/0x90
 __fput+0x102/0x430
 task_work_run+0xf1/0x160
 ? __pfx_task_work_run+0x10/0x10
 ? mark_held_locks+0x24/0x90
 exit_to_user_mode_prepare+0x170/0x180
 syscall_exit_to_user_mode+0x19/0x50
 do_syscall_64+0x4e/0x90
 entry_SYSCALL_64_after_hwframe+0x70/0xda

Fixes: 0f00cd322d22 ("Bluetooth: Free potentially unfreed SCO connection")
Link: https://syzkaller.appspot.com/bug?extid=8bb72f86fc823817bc5d
Cc: <stable@vger.kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Free potentially unfreed SCO connection

commit 0f00cd322d22d4441de51aa80bcce5bb6a8cbb44 upstream.

It is possible to initiate a SCO connection while deleting the
corresponding ACL connection, e.g. in below scenario:

(1) < hci setup sync connect command
(2) > hci disconn complete event (for the acl connection)
(3) > hci command complete event (for(1), failure)

When it happens, hci_cs_setup_sync_conn won't be able to obtain the
reference to the SCO connection, so it will be stuck and potentially
hinder subsequent connections to the same device.

This patch prevents that by also deleting the SCO connection if it is
still not established when the corresponding ACL connection is deleted.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bluetooth: btbcm: Fix logic error in forming the board name.

commit b76abe4648c1acc791a207e7c08d1719eb9f4ea8 upstream.

This patch fixes an incorrect loop exit condition in code that replaces
'/' symbols in the board name. There might also be a memory corruption
issue here, but it is unlikely to be a real problem.

Cc: <stable@vger.kernel.org>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix race condition in hidp_session_thread

commit c95930abd687fcd1aa040dc4fe90dff947916460 upstream.

There is a potential race condition in hidp_session_thread that may
lead to use-after-free. For instance, the timer is active while
hidp_del_timer is called in hidp_session_thread(). After hidp_session_put,
then 'session' will be freed, causing kernel panic when hidp_idle_timeout
is running.

The solution is to use del_timer_sync instead of del_timer.

Here is the call trace:

? hidp_session_probe+0x780/0x780
call_timer_fn+0x2d/0x1e0
__run_timers.part.0+0x569/0x940
hidp_session_probe+0x780/0x780
call_timer_fn+0x1e0/0x1e0
ktime_get+0x5c/0xf0
lapic_next_deadline+0x2c/0x40
clockevents_program_event+0x205/0x320
run_timer_softirq+0xa9/0x1b0
__do_softirq+0x1b9/0x641
__irq_exit_rcu+0xdc/0x190
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0xa1/0xc0

Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}

commit a2a9339e1c9deb7e1e079e12e27a0265aea8421a upstream.

Similar to commit d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free
caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.

Cc: stable@kernel.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/hdmi: disable KAE for Intel DG2

commit 6ab6f98fcdc9d4fbe245aa67de03542deea65322 upstream.

Use of keep-alive (KAE) has resulted in loss of audio on some A750/770
cards as the transition from keep-alive to stream playback is not
working as expected. As there is limited benefit of the new KAE mode
on discrete cards, revert back to older silent-stream implementation
on these systems.

Cc: stable@vger.kernel.org
Fixes: 15175a4f2bbb ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8307
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230413191153.3692049-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards

commit f342ac00da1064eb4f94b1f4bcacbdfea955797a upstream.

The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.

Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: emu10k1: don't create old pass-through playback device on Audigy

commit 8dd13214a810c695044aa168c0ddba1a9c433e4f upstream.

It could have never worked, as snd_emu10k1_fx8010_playback_prepare() and
snd_emu10k1_fx8010_playback_hw_free() assume the emu10k1 offset for the
ETRAM, and the default DSP code includes no handler for it. It also
wouldn't make a lot of sense to make it work, as Audigy has an own, much
simpler, pass-through mechanism. So just skip creation of the device.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197938-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire-tascam: add missing unwind goto in snd_tscm_stream_start_duplex()

commit fb4a624f88f658c7b7ae124452bd42eaa8ac7168 upstream.

Smatch Warns:
sound/firewire/tascam/tascam-stream.c:493 snd_tscm_stream_start_duplex()
warn: missing unwind goto?

The direct return will cause the stream list of "&tscm->domain" unemptied
and the session in "tscm" unfinished if amdtp_domain_start() returns with
an error.

Fix this by changing the direct return to a goto which will empty the
stream list of "&tscm->domain" and finish the session in "tscm".

The snd_tscm_stream_start_duplex() function is called in the prepare
callback of PCM. According to "ALSA Kernel API Documentation", the prepare
callback of PCM will be called many times at each setup. So, if the
"&d->streams" list is not emptied, when the prepare callback is called
next time, snd_tscm_stream_start_duplex() will receive -EBUSY from
amdtp_domain_add_stream() that tries to add an existing stream to the
domain. The error handling code after the "error" label will be executed
in this case, and the "&d->streams" list will be emptied. So not emptying
the "&d->streams" list will not cause an issue. But it is more efficient
and readable to empty it on the first error by changing the direct return
to a goto statement.

The session in "tscm" has been begun before amdtp_domain_start(), so it
needs to be finished when amdtp_domain_start() fails.

Fixes: c281d46a51e3 ("ALSA: firewire-tascam: support AMDTP domain")
Signed-off-by: Xu Biang <xubiang@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230406132801.105108-1-xubiang@hust.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirks for Lenovo Z13/Z16 Gen2

commit 8eda19cd59cedbfe4ec11aea4bcecabe4c98e9e4 upstream.

These Lenovo laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230412160531.182007-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: patch_realtek: add quirk for Asus N7601ZM

commit e959f2beec8e655dba79c5a7111beedae5e757e0 upstream.

Add pins and verbs needed to enable speakers and jack.

The pins and verbs configurations were identified by snooping the
Windows driver commands, with a nice write-up here:
https://brakkee.org/site/2023/02/07/fixing-sound-on-the-asus-n7601zm/

Reported-by: Erik Brakkee <erik@brakkee.org>
Link: https://github.com/thesofproject/linux/issues/4176
Tested-by: Erik Brakkee <erik@brakkee.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230406152725.15191-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: i2c/cs8427: fix iec958 mixer control deactivation

commit e98e7a82bca2b6dce3e03719cff800ec913f9af7 upstream.

snd_cs8427_iec958_active() would always delete
SNDRV_CTL_ELEM_ACCESS_INACTIVE, even though the function has an
argument `active`.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201219.2197811-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard

commit c17f8fd31700392b1bb9e7b66924333568cb3700 upstream.

Like the other boards from the D*45* series, this one sets up the
outputs not quite correctly.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: emu10k1: fix capture interrupt handler unlinking

commit b09c551c77c7e01dc6e4f3c8bf06b5ffa7b06db5 upstream.

Due to two copy/pastos, closing the MIC or EFX capture device would
make a running ADC capture hang due to unsetting its interrupt handler.
In principle, this would have also allowed dereferencing dangling
pointers, but we're actually rather thorough at disabling and flushing
the ints.

While it may sound like one, this actually wasn't a hypothetical bug:
PortAudio will open a capture stream at startup (and close it right
away) even if not asked to. If the first device is busy, it will just
proceed with the next one ... thus killing a concurrent capture.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197923-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Pass the right info to drm_dp_remove_payload

commit b8ca445f550a9a079134f836466ddda3bfad6108 upstream.

[Why & How]
drm_dp_remove_payload() interface was changed. Correct amdgpu dm code
to pass the right parameter to the drm helper function.

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry-picked from b8ca445f550a9a079134f836466ddda3bfad6108)
[Hand modified due to missing f0127cb11299df80df45583b216e13f27c408545 which
 failed to apply due to missing 94dfeaa46925bb6b4d43645bbb6234e846dec257]
Reported-and-tested-by: Veronika Schwan <veronika@pisquaredover6.de>
Fixes: d7b5638bd337 ("drm/amd/display: Take FEC Overhead into Timeslot Calculation")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "pinctrl: amd: Disable and mask interrupts on resume"

commit 534e465845ebfb4a97eb5459d3931a0b35e3b9a5 upstream.

This reverts commit b26cd9325be4c1fcd331b77f10acb627c560d4d7.

This patch introduces a regression on Lenovo Z13, which can't wake
from the lid with it applied; and some unspecified AMD based Dell
platforms are unable to wake from hitting the power button

Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230411134932.292287-1-korneld@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.24

Link: https://lore.kernel.org/r/20230412082836.695875037@linuxfoundation.org
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Slade Watkins <srw@sladewatkins.net =
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpftool: Print newline before '}' for struct with padding only fields

[ Upstream commit 44a726c3f23cf762ef4ce3c1709aefbcbe97f62c ]

btf_dump_emit_struct_def attempts to print empty structures at a
single line, e.g. `struct empty {}`. However, it has to account for a
case when there are no regular but some padding fields in the struct.
In such case `vlen` would be zero, but size would be non-zero.

E.g. here is struct bpf_timer from vmlinux.h before this patch:

 struct bpf_timer {
  long: 64;
long: 64;};

And after this patch:

 struct bpf_dynptr {
  long: 64;
long: 64;
 };

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221001104425.415768-1-eddyz87@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: enable maple tree RCU mode by default.

commit 3dd4432549415f3c65dd52d5c687629efbf4ece1 upstream.

Use the maple tree in RCU mode for VMA tracking.

The maple tree tracks the stack and is able to update the pivot
(lower/upper boundary) in-place to allow the page fault handler to write
to the tree while holding just the mmap read lock.  This is safe as the
writes to the stack have a guard VMA which ensures there will always be
a NULL in the direction of the growth and thus will only update a pivot.

It is possible, but not recommended, to have VMAs that grow up/down
without guard VMAs.  syzbot has constructed a testcase which sets up a
VMA to grow and consume the empty space.  Overwriting the entire NULL
entry causes the tree to be altered in a way that is not safe for
concurrent readers; the readers may see a node being rewritten or one
that does not match the maple state they are using.

Enabling RCU mode allows the concurrent readers to see a stable node and
will return the expected result.

Link: https://lkml.kernel.org/r/20230227173632.3292573-9-surenb@google.com
Cc: stable@vger.kernel.org
Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+8d95422d3537159ca390@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: add RCU lock checking to rcu callback functions

commit 790e1fa86b340c2bd4a327e01c161f7a1ad885f6 upstream.

Dereferencing RCU objects within the RCU callback without the RCU check
has caused lockdep to complain.  Fix the RCU dereferencing by using the
RCU callback lock to ensure the operation is safe.

Also stop creating a new lock to use for dereferencing during destruction
of the tree or subtree.  Instead, pass through a pointer to the tree that
has the lock that is held for RCU dereferencing checking.  It also does
not make sense to use the maple state in the freeing scenario as the tree
walk is a special case where the tree no longer has the normal encodings
and parent pointers.

Link: https://lkml.kernel.org/r/20230227173632.3292573-8-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: stable@vger.kernel.org
Reported-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: add smp_rmb() to dead node detection

commit 0a2b18d948838e16912b3b627b504ab062b7d02a upstream.

Add an smp_rmb() before reading the parent pointer to ensure that anything
read from the node prior to the parent pointer hasn't been reordered ahead
of this check.

The is necessary for RCU mode.

Link: https://lkml.kernel.org/r/20230227173632.3292573-7-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: stable@vger.kernel.org
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: remove extra smp_wmb() from mas_dead_leaves()

commit 8372f4d83f96f35915106093cde4565836587123 upstream.

The call to mte_set_dead_node() before the smp_wmb() already calls
smp_wmb() so this is not needed.  This is an optimization for the RCU mode
of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-5-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: stable@vger.kernel.org
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix freeing of nodes in rcu mode

commit 2e5b4921f8efc9e845f4f04741797d16f36847eb upstream.

The walk to destroy the nodes was not always setting the node type and
would result in a destroy method potentially using the values as nodes.
Avoid this by setting the correct node types.  This is necessary for the
RCU mode of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-4-surenb@google.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: detect dead nodes in mas_start()

commit a7b92d59c885018cb7bb88539892278e4fd64b29 upstream.

When initially starting a search, the root node may already be in the
process of being replaced in RCU mode.  Detect and restart the walk if
this is the case.  This is necessary for RCU mode of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-3-surenb@google.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: refine ma_state init from mas_start()

commit 46b345848261009477552d654cb2f65000c30e4d upstream.

If mas->node is an MAS_START, there are three cases, and they all assign
different values to mas->node and mas->offset.  So there is no need to set
them to a default value before updating.

Update them directly to make them easier to understand and for better
readability.

Link: https://lkml.kernel.org/r/20221221060058.609003-7-vernon2gm@gmail.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Vernon Yang <vernon2gm@gmail.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: be more cautious about dead nodes

commit 39d0bd86c499ecd6abae42a9b7112056c5560691 upstream.

ma_pivots() and ma_data_end() may be called with a dead node.  Ensure to
that the node isn't dead before using the returned values.

This is necessary for RCU mode of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-2-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix mas_prev() and mas_find() state handling

commit 17dc622c7b0f94e49bed030726df4db12ecaa6b5 upstream.

When mas_prev() does not find anything, set the state to MAS_NONE.

Handle the MAS_NONE in mas_find() like a MAS_START.

Link: https://lkml.kernel.org/r/20230120162650.984577-7-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: <syzbot+502859d610c661e56545@syzkaller.appspotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix handle of invalidated state in mas_wr_store_setup()

commit 1202700c3f8cc5f7e4646c3cf05ee6f7c8bc6ccf upstream.

If an invalidated maple state is encountered during write, reset the maple
state to MAS_START.  This will result in a re-walk of the tree to the
correct location for the write.

Link: https://lore.kernel.org/all/20230107020126.1627-1-sj@kernel.org/
Link: https://lkml.kernel.org/r/20230120162650.984577-6-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: reduce user error potential

commit 50e81c82ad947045c7ed26ddc9acb17276b653b6 upstream.

When iterating, a user may operate on the tree and cause the maple state
to be altered and left in an unintuitive state.  Detect this scenario and
correct it by setting to the limit and invalidating the state.

Link: https://lkml.kernel.org/r/20230120162650.984577-4-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix potential rcu issue

commit 65be6f058b0eba98dc6c6f197ea9f62c9b6a519f upstream.

Ensure the node isn't dead after reading the node end.

Link: https://lkml.kernel.org/r/20230120162650.984577-3-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: remove GFP_ZERO from kmem_cache_alloc() and kmem_cache_alloc_bulk()

commit 541e06b772c1aaffb3b6a245ccface36d7107af2 upstream.

Preallocations are common in the VMA code to avoid allocating under
certain locking conditions.  The preallocations must also cover the
worst-case scenario.  Removing the GFP_ZERO flag from the
kmem_cache_alloc() (and bulk variant) calls will reduce the amount of time
spent zeroing memory that may not be used.  Only zero out the necessary
area to keep track of the allocations in the maple state.  Zero the entire
node prior to using it in the tree.

This required internal changes to node counting on allocation, so the test
code is also updated.

This restores some micro-benchmark performance: up to +9% in mmtests mmap1
by my testing +10% to +20% in mmap, mmapaddr, mmapmany tests reported by
Red Hat

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2149636
Link: https://lkml.kernel.org/r/20230105160427.2988454-1-Liam.Howlett@oracle.com
Cc: stable@vger.kernel.org
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: take a page reference when removing device exclusive entries

commit 7c7b962938ddda6a9cd095de557ee5250706ea88 upstream.

Device exclusive page table entries are used to prevent CPU access to a
page whilst it is being accessed from a device.  Typically this is used to
implement atomic operations when the underlying bus does not support
atomic access.  When a CPU thread encounters a device exclusive entry it
locks the page and restores the original entry after calling mmu notifiers
to signal drivers that exclusive access is no longer available.

The device exclusive entry holds a reference to the page making it safe to
access the struct page whilst the entry is present.  However the fault
handling code does not hold the PTL when taking the page lock.  This means
if there are multiple threads faulting concurrently on the device
exclusive entry one will remove the entry whilst others will wait on the
page lock without holding a reference.

This can lead to threads locking or waiting on a folio with a zero
refcount.  Whilst mmap_lock prevents the pages getting freed via munmap()
they may still be freed by a migration.  This leads to warnings such as
PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount
drops to zero.

Fix this by trying to take a reference on the folio before locking it.
The code already checks the PTE under the PTL and aborts if the entry is
no longer there.  It is also possible the folio has been unmapped, freed
and re-allocated allowing a reference to be taken on an unrelated folio.
This case is also detected by the PTE check and the folio is unlocked
without further changes.

Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com
Fixes: b756a3b5e7ea ("mm: device exclusive memory access")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Split icl_color_commit_noarm() from skl_color_commit_noarm()

commit 76b767d4d1cd052e455cf18e06929e8b2b70101d upstream.

We're going to want different behavior for skl/glk vs. icl
in .color_commit_noarm(), so split the hook into two. Arguably
we already had slightly different behaviour since
csc_enable/gamma_enable are never set on icl+, so the old
code was perhaps a bit confusing as well.

Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit f161eb01f50ab31f2084975b43bce54b7b671e17)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Use _MMIO_PIPE() for SKL_BOTTOM_COLOR

commit 05ca98523481aa687c5a8dce8939fec539632153 upstream.

No need to use _MMIO_PIPE2() for SKL_BOTTOM_COLOR
since all pipe registers are evenly spread on skl+.
Switch to _MMIO_PIPE() and thus avoid the hidden dev_priv.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-3-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: lt9611: Fix PLL being unable to lock

commit 2a9df204be0bbb896e087f00b9ee3fc559d5a608 upstream.

This fixes PLL being unable to lock, and is derived from an equivalent
downstream commit.

Available LT9611 documentation does not list this register, neither does
LT9611UXC (which is a different chip).

This commit has been confirmed to fix HDMI output on DragonBoard 845c.

Suggested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221213150304.4189760-1-robert.foss@linaro.org
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dp_mst: Fix payload removal during output disabling

commit eb50912ec931913e70640cecf75cb993fd26995f upstream.

Use the correct old/new topology and payload states in
intel_mst_disable_dp(). So far drm_atomic_get_mst_topology_state() it
used returned either the old state, in case the state was added already
earlier during the atomic check phase or otherwise the new state (but
the latter could fail, which can't be handled in the enable/disable
hooks). After the first patch in the patchset, the state should always
get added already during the check phase, so here we can get the
old/new states without a failure.

drm_dp_remove_payload() should use time_slots from the old payload state
and vc_start_slot in the new one. It should update the new payload
states to reflect the sink's current payload table after the payload is
removed. Pass the new topology state and the old and new payload states
accordingly.

This also fixes a problem where the payload allocations for multiple MST
streams on the same link got inconsistent after a few commits, as
during payload removal the old instead of the new payload state got
updated, so the subsequent enabling sequence and commits used a stale
payload state.

v2: Constify the old payload state pointer. (Ville)

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-4-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload()

commit e761cc20946a0094df71cb31a565a6a0d03bd8be upstream.

Atm, drm_dp_remove_payload() uses the same payload state to both get the
vc_start_slot required for the payload removal DPCD message and to
deduct time_slots from vc_start_slot of all payloads after the one being
removed.

The above isn't always correct, as vc_start_slot must be the up-to-date
version contained in the new payload state, but time_slots must be the
one used when the payload was previously added, contained in the old
payload state. The new payload's time_slots can change vs. the old one
if the current atomic commit changes the corresponding mode.

This patch let's drivers pass the old and new payload states to
drm_dp_remove_payload(), but keeps these the same for now in all drivers
not to change the behavior. A follow-up i915 patch will pass in that
driver the correct old and new states to the function.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org # 6.1
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-2-imre.deak@intel.com
Hand modified for missing 8c7d980da9ba3eb67a1b40fd4b33bcf49397084b
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: skip psp suspend for IMU enabled ASICs mode2 reset

commit e11c775030c5585370fda43035204bb5fa23b139 upstream.

The psp suspend & resume should be skipped to avoid destroy
the TMR and reload FWs again for IMU enabled APU ASICs.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: for S0ix, skip SDMA 5.x+ suspend/resume

commit 2a7798ea7390fd78f191c9e9bf68f5581d3b4a02 upstream.

SDMA 5.x is part of the GFX block so it's controlled via
GFXOFF.  Skip suspend as it should be handled the same
as GFX.

v2: drop SDMA 4.x.  That requires special handling.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Clear MST topology if it fails to resume

commit 3f6752b4de41896c7f1609b1585db2080e8150d8 upstream.

[Why]
In case of failure to resume MST topology after suspend, an emtpty
mst tree prevents further mst hub detection on the same connector.
That causes the issue with MST hub hotplug after it's been unplug in
suspend.

[How]
Stop topology manager on the connector after detecting DM_MST failure.

Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-throttle: Fix that bps of child could exceed bps limited in parent

commit 84aca0a7e039c8735abc0f89f3f48e9006c0dfc7 upstream.

Consider situation as following (on the default hierarchy):
 HDD
  |
root (bps limit: 4k)
  |
child (bps limit :8k)
  |
fio bs=8k
Rate of fio is supposed to be 4k, but result is 8k. Reason is as
following:
Size of single IO from fio is larger than bytes allowed in one
throtl_slice in child, so IOs are always queued in child group first.
When queued IOs in child are dispatched to parent group, BIO_BPS_THROTTLED
is set and these IOs will not be limited by tg_within_bps_limit anymore.
Fix this by only set BIO_BPS_THROTTLED when the bio traversed the entire
tree.

There patch has no influence on situation which is not on the default
hierarchy as each group is a single root group without parent.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-3-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Khazhy Kumykov <khazhy@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix a potential concurrency bug in RCU mode

commit c45ea315a602d45569b08b93e9ab30f6a63a38aa upstream.

There is a concurrency bug that may cause the wrong value to be loaded
when a CPU is modifying the maple tree.

CPU1:
mtree_insert_range()
  mas_insert()
    mas_store_root()
      ...
      mas_root_expand()
        ...
        rcu_assign_pointer(mas->tree->ma_root, mte_mk_root(mas->node));
        ma_set_meta(node, maple_leaf_64, 0, slot);    <---IP

CPU2:
mtree_load()
  mtree_lookup_walk()
    ma_data_end();

When CPU1 is about to execute the instruction pointed to by IP, the
ma_data_end() executed by CPU2 may return the wrong end position, which
will cause the value loaded by mtree_load() to be wrong.

An example of triggering the bug:

Add mdelay(100) between rcu_assign_pointer() and ma_set_meta() in
mas_root_expand().

static DEFINE_MTREE(tree);
int work(void *p) {
unsigned long val;
for (int i = 0 ; i< 30; ++i) {
val = (unsigned long)mtree_load(&tree, 8);
mdelay(5);
pr_info("%lu",val);
}
return 0;
}

mt_init_flags(&tree, MT_FLAGS_USE_RCU);
mtree_insert(&tree, 0, (void*)12345, GFP_KERNEL);
run_thread(work)
mtree_insert(&tree, 1, (void*)56789, GFP_KERNEL);

In RCU mode, mtree_load() should always return the value before or after
the data structure is modified, and in this example mtree_load(&tree, 8)
may return 56789 which is not expected, it should always return NULL.  Fix
it by put ma_set_meta() before rcu_assign_pointer().

Link: https://lkml.kernel.org/r/20230314124203.91572-4-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix get wrong data_end in mtree_lookup_walk()

commit ec07967d7523adb3670f9dfee0232e3bc868f3de upstream.

if (likely(offset > end))
max = pivots[offset];

The above code should be changed to if (likely(offset < end)), which is
correct.  This affects the correctness of ma_data_end().  Now it seems
that the final result will not be wrong, but it is best to change it.
This patch does not change the code as above, because it simplifies the
code by the way.

Link: https://lkml.kernel.org/r/20230314124203.91572-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230314124203.91572-2-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: fix uffd wr-protection for CoW optimization path

commit 60d5b473d61be61ac315e544fcd6a8234a79500e upstream.

This patch fixes an issue that a hugetlb uffd-wr-protected mapping can be
writable even with uffd-wp bit set.  It only happens with hugetlb private
mappings, when someone firstly wr-protects a missing pte (which will
install a pte marker), then a write to the same page without any prior
access to the page.

Userfaultfd-wp trap for hugetlb was implemented in hugetlb_fault() before
reaching hugetlb_wp() to avoid taking more locks that userfault won't
need.  However there's one CoW optimization path that can trigger
hugetlb_wp() inside hugetlb_no_page(), which will bypass the trap.

This patch skips hugetlb_wp() for CoW and retries the fault if uffd-wp bit
is detected.  The new path will only trigger in the CoW optimization path
because generic hugetlb_fault() (e.g.  when a present pte was
wr-protected) will resolve the uffd-wp bit already.  Also make sure
anonymous UNSHARE won't be affected and can still be resolved, IOW only
skip CoW not CoR.

This patch will be needed for v5.19+ hence copy stable.

[peterx@redhat.com: v2]
Link: https://lkml.kernel.org/r/ZBzOqwF2wrHgBVZb@x1n
[peterx@redhat.com: v3]
Link: https://lkml.kernel.org/r/20230324142620.2344140-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230321191840.1897940-1-peterx@redhat.com
Fixes: 166f3ecc0daf ("mm/hugetlb: hook page faults for uffd write protection")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()

commit 6fe7d6b992113719e96744d974212df3fcddc76c upstream.

The si->lock must be held when deleting the si from the available list.
Otherwise, another thread can re-add the si to the available list, which
can lead to memory corruption.  The only place we have found where this
happens is in the swapoff path.  This case can be described as below:

core 0                       core 1
swapoff

del_from_avail_list(si)      waiting

try lock si->lock            acquire swap_avail_lock
                             and re-add si into
                             swap_avail_head

acquire si->lock but missing si already being added again, and continuing
to clear SWP_WRITEOK, etc.

It can be easily found that a massive warning messages can be triggered
inside get_swap_pages() by some special cases, for example, we call
madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile,
run much swapon-swapoff operations (e.g.  stress-ng-swap).

However, in the worst case, panic can be caused by the above scene.  In
swapoff(), the memory used by si could be kept in swap_info[] after
turning off a swap.  This means memory corruption will not be caused
immediately until allocated and reset for a new swap in the swapon path.
A panic message caused: (with CONFIG_PLIST_DEBUG enabled)

------------[ cut here ]------------
top: 00000000e58a3003, n: 0000000013e75cda, p: 000000008cd4451a
prev: 0000000035b1e58a, n: 000000008cd4451a, p: 000000002150ee8d
next: 000000008cd4451a, n: 000000008cd4451a, p: 000000008cd4451a
WARNING: CPU: 21 PID: 1843 at lib/plist.c:60 plist_check_prev_next_node+0x50/0x70
Modules linked in: rfkill(E) crct10dif_ce(E)...
CPU: 21 PID: 1843 Comm: stress-ng Kdump: ... 5.10.134+
Hardware name: Alibaba Cloud ECS, BIOS 0.0.0 02/06/2015
pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
pc : plist_check_prev_next_node+0x50/0x70
lr : plist_check_prev_next_node+0x50/0x70
sp : ffff0018009d3c30
x29: ffff0018009d3c40 x28: ffff800011b32a98
x27: 0000000000000000 x26: ffff001803908000
x25: ffff8000128ea088 x24: ffff800011b32a48
x23: 0000000000000028 x22: ffff001800875c00
x21: ffff800010f9e520 x20: ffff001800875c00
x19: ffff001800fdc6e0 x18: 0000000000000030
x17: 0000000000000000 x16: 0000000000000000
x15: 0736076307640766 x14: 0730073007380731
x13: 0736076307640766 x12: 0730073007380731
x11: 000000000004058d x10: 0000000085a85b76
x9 : ffff8000101436e4 x8 : ffff800011c8ce08
x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffff0017df9ed338 x4 : 0000000000000001
x3 : ffff8017ce62a000 x2 : ffff0017df9ed340
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
 plist_check_prev_next_node+0x50/0x70
 plist_check_head+0x80/0xf0
 plist_add+0x28/0x140
 add_to_avail_list+0x9c/0xf0
 _enable_swap_info+0x78/0xb4
 __do_sys_swapon+0x918/0xa10
 __arm64_sys_swapon+0x20/0x30
 el0_svc_common+0x8c/0x220
 do_el0_svc+0x2c/0x90
 el0_svc+0x1c/0x30
 el0_sync_handler+0xa8/0xb0
 el0_sync+0x148/0x180
irq event stamp: 2082270

Now, si->lock locked before calling 'del_from_avail_list()' to make sure
other thread see the si had been deleted and SWP_WRITEOK cleared together,
will not reinsert again.

This problem exists in versions after stable 5.10.y.

Link: https://lkml.kernel.org/r/20230404154716.23058-1-rongwei.wang@linux.alibaba.com
Fixes: a2468cc9bfdff ("swap: choose swap device according to numa node")
Tested-by: Yongchen Yin <wb-yyc939293@alibaba-inc.com>
Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer: Fix race while reader and writer are on the same page

commit 6455b6163d8c680366663cdb8c679514d55fc30c upstream.

When user reads file 'trace_pipe', kernel keeps printing following logs
that warn at "cpu_buffer->reader_page->read > rb_page_size(reader)" in
rb_get_reader_page(). It just looks like there's an infinite loop in
tracing_read_pipe(). This problem occurs several times on arm64 platform
when testing v5.10 and below.

  Call trace:
   rb_get_reader_page+0x248/0x1300
   rb_buffer_peek+0x34/0x160
   ring_buffer_peek+0xbc/0x224
   peek_next_entry+0x98/0xbc
   __find_next_entry+0xc4/0x1c0
   trace_find_next_entry_inc+0x30/0x94
   tracing_read_pipe+0x198/0x304
   vfs_read+0xb4/0x1e0
   ksys_read+0x74/0x100
   __arm64_sys_read+0x24/0x30
   el0_svc_common.constprop.0+0x7c/0x1bc
   do_el0_svc+0x2c/0x94
   el0_svc+0x20/0x30
   el0_sync_handler+0xb0/0xb4
   el0_sync+0x160/0x180

Then I dump the vmcore and look into the problematic per_cpu ring_buffer,
I found that tail_page/commit_page/reader_page are on the same page while
reader_page->read is obviously abnormal:
  tail_page == commit_page == reader_page == {
    .write = 0x100d20,
    .read = 0x8f9f4805,  // Far greater than 0xd20, obviously abnormal!!!
    .entries = 0x10004c,
    .real_end = 0x0,
    .page = {
      .time_stamp = 0x857257416af0,
      .commit = 0xd20,  // This page hasn't been full filled.
      // .data[0...0xd20] seems normal.
    }
 }

The root cause is most likely the race that reader and writer are on the
same page while reader saw an event that not fully committed by writer.

To fix this, add memory barriers to make sure the reader can see the
content of what is committed. Since commit a0fcaaed0c46 ("ring-buffer: Fix
race between reset page and reading page") has added the read barrier in
rb_get_reader_page(), here we just need to add the write barrier.

Link: https://lore.kernel.org/linux-trace-kernel/20230325021247.2923907-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 77ae365eca89 ("ring-buffer: make lockless")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: fix race condition UAF in i915_perf_add_config_ioctl

commit dc30c011469165d57af9adac5baff7d767d20e5c upstream.

Userspace can guess the id value and try to race oa_config object creation
with config remove, resulting in a use-after-free if we dereference the
object after unlocking the metrics_lock.  For that reason, unlocking the
metrics_lock must be done after we are done dereferencing the object.

Signed-off-by: Min Li <lm0963hack@gmail.com>
Fixes: f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328093627.5067-1-lm0963hack@gmail.com
[tursulin: Manually added stable tag.]
(cherry picked from commit 49f6f6483b652108bcb73accd0204a464b922395)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix context runtime accounting

commit dc3421560a67361442f33ec962fc6dd48895a0df upstream.

When considering whether to mark one context as stopped and another as
started we need to look at whether the previous and new _contexts_ are
different and not just requests. Otherwise the software tracked context
start time was incorrectly updated to the most recent lite-restore time-
stamp, which was in some cases resulting in active time going backward,
until the context switch (typically the heartbeat pulse) would synchronise
with the hardware tracked context runtime. Easiest use case to observe
this behaviour was with a full screen clients with close to 100% engine
load.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: bb6287cb1886 ("drm/i915: Track context current active time")
Cc: <stable@vger.kernel.org> # v5.19+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320151423.1708436-1-tvrtko.ursulin@linux.intel.com
[tursulin: Fix spelling in commit msg.]
(cherry picked from commit b3e70051879c665acdd3a1ab50d0ed58d6a8001f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/disp: Support more modes by checking with lower bpc

commit 7f67aa097e875c87fba024e850cf405342300059 upstream.

This allows us to advertise more modes especially on HDR displays.

Fixes using 4K@60 modes on my TV and main display both using a HDMI to DP
adapter. Also fixes similar issues for users running into this.

Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330223938.4025569-1-kherbst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error path

commit 764a2ab9eb56e1200083e771aab16186836edf1d upstream.

Make sure all bo->base.pages entries are either NULL or pointing to a
valid page before calling drm_gem_shmem_put_pages().

Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: <stable@vger.kernel.org>
Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521093811.1018992-1-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ublk: read any SQE values upfront

commit 8c68ae3b22fa6fb2dbe83ef955ff10936503d28e upstream.

Since SQE memory is shared with userspace, we should only be reading it
once. We cannot read it multiple times, particularly when it's read once
for validation and then read again for the actual use.

ublk_ch_uring_cmd() is safe when called as a retry operation, as the
memory backing is stable at that point. But for normal issue, we want
to ensure that we only read ublksrv_io_cmd once. Wrap the function in
a helper that reads the value into an on-stack copy of the struct.

Cc: stable@vger.kernel.org # 6.0+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mt76: ignore key disable commands

commit e6db67fa871dee37d22701daba806bfcd4d9df49 upstream.

This helps avoid cleartext leakage of already queued or powersave buffered
packets, when a reassoc triggers the key deletion.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330091259.61378-1-nbd@nbd.name
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: vmalloc: avoid warn_alloc noise caused by fatal signal

commit f349b15e183d6956f1b63d6ff57849ff10c7edd5 upstream.

There're some suspicious warn_alloc on my test serer, for example,

[13366.518837] warn_alloc: 81 callbacks suppressed
[13366.518841] test_verifier: vmalloc error: size 4096, page order 0, failed to allocate pages, mode:0x500dc2(GFP_HIGHUSER|__GFP_ZERO|__GFP_ACCOUNT), nodemask=(null),cpuset=/,mems_allowed=0-1
[13366.522240] CPU: 30 PID: 722463 Comm: test_verifier Kdump: loaded Tainted: G        W  O       6.2.0+ #638
[13366.524216] Call Trace:
[13366.524702]  <TASK>
[13366.525148]  dump_stack_lvl+0x6c/0x80
[13366.525712]  dump_stack+0x10/0x20
[13366.526239]  warn_alloc+0x119/0x190
[13366.526783]  ? alloc_pages_bulk_array_mempolicy+0x9e/0x2a0
[13366.527470]  __vmalloc_area_node+0x546/0x5b0
[13366.528066]  __vmalloc_node_range+0xc2/0x210
[13366.528660]  __vmalloc_node+0x42/0x50
[13366.529186]  ? bpf_prog_realloc+0x53/0xc0
[13366.529743]  __vmalloc+0x1e/0x30
[13366.530235]  bpf_prog_realloc+0x53/0xc0
[13366.530771]  bpf_patch_insn_single+0x80/0x1b0
[13366.531351]  bpf_jit_blind_constants+0xe9/0x1c0
[13366.531932]  ? __free_pages+0xee/0x100
[13366.532457]  ? free_large_kmalloc+0x58/0xb0
[13366.533002]  bpf_int_jit_compile+0x8c/0x5e0
[13366.533546]  bpf_prog_select_runtime+0xb4/0x100
[13366.534108]  bpf_prog_load+0x6b1/0xa50
[13366.534610]  ? perf_event_task_tick+0x96/0xb0
[13366.535151]  ? security_capable+0x3a/0x60
[13366.535663]  __sys_bpf+0xb38/0x2190
[13366.536120]  ? kvm_clock_get_cycles+0x9/0x10
[13366.536643]  __x64_sys_bpf+0x1c/0x30
[13366.537094]  do_syscall_64+0x38/0x90
[13366.537554]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[13366.538107] RIP: 0033:0x7f78310f8e29
[13366.538561] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 17 e0 2c 00 f7 d8 64 89 01 48
[13366.540286] RSP: 002b:00007ffe2a61fff8 EFLAGS: 00000206 ORIG_RAX: 0000000000000141
[13366.541031] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f78310f8e29
[13366.541749] RDX: 0000000000000080 RSI: 00007ffe2a6200b0 RDI: 0000000000000005
[13366.542470] RBP: 00007ffe2a620010 R08: 00007ffe2a6202a0 R09: 00007ffe2a6200b0
[13366.543183] R10: 00000000000f423e R11: 0000000000000206 R12: 0000000000407800
[13366.543900] R13: 00007ffe2a620540 R14: 0000000000000000 R15: 0000000000000000
[13366.544623]  </TASK>
[13366.545260] Mem-Info:
[13366.546121] active_anon:81319 inactive_anon:20733 isolated_anon:0
 active_file:69450 inactive_file:5624 isolated_file:0
 unevictable:0 dirty:10 writeback:0
 slab_reclaimable:69649 slab_unreclaimable:48930
 mapped:27400 shmem:12868 pagetables:4929
 sec_pagetables:0 bounce:0
 kernel_misc_reclaimable:0
 free:15870308 free_pcp:142935 free_cma:0
[13366.551886] Node 0 active_anon:224836kB inactive_anon:33528kB active_file:175692kB inactive_file:13752kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:59248kB dirty:32kB writeback:0kB shmem:18252kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 0kB writeback_tmp:0kB kernel_stack:4616kB pagetables:10664kB sec_pagetables:0kB all_unreclaimable? no
[13366.555184] Node 1 active_anon:100440kB inactive_anon:49404kB active_file:102108kB inactive_file:8744kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:50352kB dirty:8kB writeback:0kB shmem:33220kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 0kB writeback_tmp:0kB kernel_stack:3896kB pagetables:9052kB sec_pagetables:0kB all_unreclaimable? no
[13366.558262] Node 0 DMA free:15360kB boost:0kB min:304kB low:380kB high:456kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15360kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
[13366.560821] lowmem_reserve[]: 0 2735 31873 31873 31873
[13366.561981] Node 0 DMA32 free:2790904kB boost:0kB min:56028kB low:70032kB high:84036kB reserved_highatomic:0KB active_anon:1936kB inactive_anon:20kB active_file:396kB inactive_file:344kB unevictable:0kB writepending:0kB present:3129200kB managed:2801520kB mlocked:0kB bounce:0kB free_pcp:5188kB local_pcp:0kB free_cma:0kB
[13366.565148] lowmem_reserve[]: 0 0 29137 29137 29137
[13366.566168] Node 0 Normal free:28533824kB boost:0kB min:596740kB low:745924kB high:895108kB reserved_highatomic:28672KB active_anon:222900kB inactive_anon:33508kB active_file:175296kB inactive_file:13408kB unevictable:0kB writepending:32kB present:30408704kB managed:29837172kB mlocked:0kB bounce:0kB free_pcp:295724kB local_pcp:0kB free_cma:0kB
[13366.569485] lowmem_reserve[]: 0 0 0 0 0
[13366.570416] Node 1 Normal free:32141144kB boost:0kB min:660504kB low:825628kB high:990752kB reserved_highatomic:69632KB active_anon:100440kB inactive_anon:49404kB active_file:102108kB inactive_file:8744kB unevictable:0kB writepending:8kB present:33554432kB managed:33025372kB mlocked:0kB bounce:0kB free_pcp:270880kB local_pcp:46860kB free_cma:0kB
[13366.573403] lowmem_reserve[]: 0 0 0 0 0
[13366.574015] Node 0 DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 1*1024kB (U) 1*2048kB (M) 3*4096kB (M) = 15360kB
[13366.575474] Node 0 DMA32: 782*4kB (UME) 756*8kB (UME) 736*16kB (UME) 745*32kB (UME) 694*64kB (UME) 653*128kB (UME) 595*256kB (UME) 552*512kB (UME) 454*1024kB (UME) 347*2048kB (UME) 246*4096kB (UME) = 2790904kB
[13366.577442] Node 0 Normal: 33856*4kB (UMEH) 51815*8kB (UMEH) 42418*16kB (UMEH) 36272*32kB (UMEH) 22195*64kB (UMEH) 10296*128kB (UMEH) 7238*256kB (UMEH) 5638*512kB (UEH) 5337*1024kB (UMEH) 3506*2048kB (UMEH) 1470*4096kB (UME) = 28533784kB
[13366.580460] Node 1 Normal: 15776*4kB (UMEH) 37485*8kB (UMEH) 29509*16kB (UMEH) 21420*32kB (UMEH) 14818*64kB (UMEH) 13051*128kB (UMEH) 9918*256kB (UMEH) 7374*512kB (UMEH) 5397*1024kB (UMEH) 3887*2048kB (UMEH) 2002*4096kB (UME) = 32141240kB
[13366.583027] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
[13366.584380] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[13366.585702] Node 1 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
[13366.587042] Node 1 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[13366.588372] 87386 total pagecache pages
[13366.589266] 0 pages in swap cache
[13366.590327] Free swap  = 0kB
[13366.591227] Total swap = 0kB
[13366.592142] 16777082 pages RAM
[13366.593057] 0 pages HighMem/MovableOnly
[13366.594037] 357226 pages reserved
[13366.594979] 0 pages hwpoisoned

This failure really confuse me as there're still lots of available pages.
Finally I figured out it was caused by a fatal signal.  When a process is
allocating memory via vm_area_alloc_pages(), it will break directly even
if it hasn't allocated the requested pages when it receives a fatal
signal.  In that case, we shouldn't show this warn_alloc, as it is
useless.  We only need to show this warning when there're really no enough
pages.

Link: https://lkml.kernel.org/r/20230330162625.13604-1-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zsmalloc: document freeable stats

commit 618a8a917dbf5830e2064d2fa0568940eb5d2584 upstream.

When freeable class stat was added to classes file (back in 2016) we
forgot to update zsmalloc documentation.  Fix that.

Link: https://lkml.kernel.org/r/20230325024631.2817153-3-senozhatsky@chromium.org
Fixes: 1120ed548394 ("mm/zsmalloc: add `freeable' column to pool stat")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/synthetic: Make lastcmd_mutex static

commit 31c683967174b487939efaf65e41f5ff1404e141 upstream.

The lastcmd_mutex is only used in trace_events_synth.c and should be
static.

Link: https://lore.kernel.org/linux-trace-kernel/202304062033.cRStgOuP-lkp@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230406111033.6e26de93@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Fixes: 4ccf11c4e8a8e ("tracing/synthetic: Fix races on freeing last_cmd")
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: hdac_hdmi: use set_stream() instead of set_tdm_slots()

commit f6887a71bdd2f0dcba9b8180dd2223cfa8637e85 upstream.

hdac_hdmi was not updated to use set_stream() instead of set_tdm_slots()
in the original commit so HDMI no longer produces audio.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/regressions/CAJD_bPKQdtaExvVEKxhQ47G-ZXDA=k+gzhMJRHLBe=mysPnuKA@mail.gmail.com/
Fixes: 636110411ca7 ("ASoC: Intel/SOF: use set_stream() instead of set_tdm_slots() for HDAudio")
Signed-off-by: Jason Montleon <jmontleo@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230324170711.2526-1-jmontleo@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Free error logs of tracing instances

commit 3357c6e429643231e60447b52ffbb7ac895aca22 upstream.

When a tracing instance is removed, the error messages that hold errors
that occurred in the instance needs to be freed. The following reports a
memory leak:

 # cd /sys/kernel/tracing
 # mkdir instances/foo
 # echo 'hist:keys=x' > instances/foo/events/sched/sched_switch/trigger
 # cat instances/foo/error_log
 [  117.404795] hist:sched:sched_switch: error: Couldn't find field
   Command: hist:keys=x
                      ^
 # rmdir instances/foo

Then check for memory leaks:

 # echo scan > /sys/kernel/debug/kmemleak
 # cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff88810d8ec700 (size 192):
  comm "bash", pid 869, jiffies 4294950577 (age 215.752s)
  hex dump (first 32 bytes):
    60 dd 68 61 81 88 ff ff 60 dd 68 61 81 88 ff ff  `.ha....`.ha....
    a0 30 8c 83 ff ff ff ff 26 00 0a 00 00 00 00 00  .0......&.......
  backtrace:
    [<00000000dae26536>] kmalloc_trace+0x2a/0xa0
    [<00000000b2938940>] tracing_log_err+0x277/0x2e0
    [<000000004a0e1b07>] parse_atom+0x966/0xb40
    [<0000000023b24337>] parse_expr+0x5f3/0xdb0
    [<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560
    [<00000000293a9645>] trigger_process_regex+0x135/0x1a0
    [<000000005c22b4f2>] event_trigger_write+0x87/0xf0
    [<000000002cadc509>] vfs_write+0x162/0x670
    [<0000000059c3b9be>] ksys_write+0xca/0x170
    [<00000000f1cddc00>] do_syscall_64+0x3e/0xc0
    [<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
unreferenced object 0xffff888170c35a00 (size 32):
  comm "bash", pid 869, jiffies 4294950577 (age 215.752s)
  hex dump (first 32 bytes):
    0a 20 20 43 6f 6d 6d 61 6e 64 3a 20 68 69 73 74  .  Command: hist
    3a 6b 65 79 73 3d 78 0a 00 00 00 00 00 00 00 00  :keys=x.........
  backtrace:
    [<000000006a747de5>] __kmalloc+0x4d/0x160
    [<000000000039df5f>] tracing_log_err+0x29b/0x2e0
    [<000000004a0e1b07>] parse_atom+0x966/0xb40
    [<0000000023b24337>] parse_expr+0x5f3/0xdb0
    [<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560
    [<00000000293a9645>] trigger_process_regex+0x135/0x1a0
    [<000000005c22b4f2>] event_trigger_write+0x87/0xf0
    [<000000002cadc509>] vfs_write+0x162/0x670
    [<0000000059c3b9be>] ksys_write+0xca/0x170
    [<00000000f1cddc00>] do_syscall_64+0x3e/0xc0
    [<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc

The problem is that the error log needs to be freed when the instance is
removed.

Link: https://lore.kernel.org/lkml/76134d9f-a5ba-6a0d-37b3-28310b4a1e91@alu.unizg.hr/
Link: https://lore.kernel.org/linux-trace-kernel/20230404194504.5790b95f@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Fixes: 2f754e771b1a6 ("tracing: Have the error logs show up in the proper instances")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/osnoise: Fix notify new tracing_max_latency

commit d3cba7f02cd82118c32651c73374d8a5a459d9a6 upstream.

osnoise/timerlat tracers are reporting new max latency on instances
where the tracing is off, creating inconsistencies between the max
reported values in the trace and in the tracing_max_latency. Thus
only report new tracing_max_latency on active tracing instances.

Link: https://lkml.kernel.org/r/ecd109fde4a0c24ab0f00ba1e9a144ac19a91322.1680104184.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes: dae181349f1e ("tracing/osnoise: Support a list of trace_array *tr")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/timerlat: Notify new max thread latency

commit b9f451a9029a16eb7913ace09b92493d00f2e564 upstream.

timerlat is not reporting a new tracing_max_latency for the thread
latency. The reason is that it is not calling notify_new_max_latency()
function after the new thread latency is sampled.

Call notify_new_max_latency() after computing the thread latency.

Link: https://lkml.kernel.org/r/16e18d61d69073d0192ace07bf61e405cca96e9c.1680104184.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes: dae181349f1e ("tracing/osnoise: Support a list of trace_array *tr")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/synthetic: Fix races on freeing last_cmd

commit 4ccf11c4e8a8e051499d53a12f502196c97a758e upstream.

Currently, the "last_cmd" variable can be accessed by multiple processes
asynchronously when multiple users manipulate synthetic_events node
at the same time, it could lead to use-after-free or double-free.

This patch add "lastcmd_mutex" to prevent "last_cmd" from being accessed
asynchronously.

================================================================

It's easy to reproduce in the KASAN environment by running the two
scripts below in different shells.

script 1:
        while :
        do
                echo -n -e '\x88' > /sys/kernel/tracing/synthetic_events
        done

script 2:
        while :
        do
                echo -n -e '\xb0' > /sys/kernel/tracing/synthetic_events
        done

================================================================
double-free scenario:

    process A                       process B
-------------------               ---------------
1.kstrdup last_cmd
                                  2.free last_cmd
3.free last_cmd(double-free)

================================================================
use-after-free scenario:

    process A                       process B
-------------------               ---------------
1.kstrdup last_cmd
                                  2.free last_cmd
3.tracing_log_err(use-after-free)

================================================================

Appendix 1. KASAN report double-free:

BUG: KASAN: double-free in kfree+0xdc/0x1d4
Free of addr ***** by task sh/4879
Call trace:
        ...
        kfree+0xdc/0x1d4
        create_or_delete_synth_event+0x60/0x1e8
        trace_parse_run_command+0x2bc/0x4b8
        synth_events_write+0x20/0x30
        vfs_write+0x200/0x830
        ...

Allocated by task 4879:
        ...
        kstrdup+0x5c/0x98
        create_or_delete_synth_event+0x6c/0x1e8
        trace_parse_run_command+0x2bc/0x4b8
        synth_events_write+0x20/0x30
        vfs_write+0x200/0x830
        ...

Freed by task 5464:
        ...
        kfree+0xdc/0x1d4
        create_or_delete_synth_event+0x60/0x1e8
        trace_parse_run_command+0x2bc/0x4b8
        synth_events_write+0x20/0x30
        vfs_write+0x200/0x830
        ...

================================================================
Appendix 2. KASAN report use-after-free:

BUG: KASAN: use-after-free in strlen+0x5c/0x7c
Read of size 1 at addr ***** by task sh/5483
sh: CPU: 7 PID: 5483 Comm: sh
        ...
        __asan_report_load1_noabort+0x34/0x44
        strlen+0x5c/0x7c
        tracing_log_err+0x60/0x444
        create_or_delete_synth_event+0xc4/0x204
        trace_parse_run_command+0x2bc/0x4b8
        synth_events_write+0x20/0x30
        vfs_write+0x200/0x830
        ...

Allocated by task 5483:
        ...
        kstrdup+0x5c/0x98
        create_or_delete_synth_event+0x80/0x204
        trace_parse_run_command+0x2bc/0x4b8
        synth_events_write+0x20/0x30
        vfs_write+0x200/0x830
        ...

Freed by task 5480:
        ...
        kfree+0xdc/0x1d4
        create_or_delete_synth_event+0x74/0x204
        trace_parse_run_command+0x2bc/0x4b8
        synth_events_write+0x20/0x30
        vfs_write+0x200/0x830
        ...

Link: https://lore.kernel.org/linux-trace-kernel/20230321110444.1587-1-Tze-nan.Wu@mediatek.com
Fixes: 27c888da9867 ("tracing: Remove size restriction on synthetic event cmd error logging")
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: "Tom Zanussi" <zanussi@kernel.org>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Add queue reset into stmmac_xdp_open() function

commit 24e3fce00c0b557491ff596c0682a29dee6fe848 upstream.

Queue reset was moved out from __init_dma_rx_desc_rings() and
__init_dma_tx_desc_rings() functions. Thus, the driver fails to transmit
and receive packet after XDP prog setup.

This commit adds the missing queue reset into stmmac_xdp_open() function.

Fixes: f9ec5723c3db ("net: ethernet: stmicro: stmmac: move queue reset to dedicated functions")
Cc: <stable@vger.kernel.org> # 6.0+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230404044823.3226144-1-yoong.siang.song@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530

commit a5b2781dcab2c77979a4b8adda781d2543580901 upstream.

The Lenovo ThinkPad W530 uses a nvidia k1000m GPU. When this gets used
together with one of the older nvidia binary driver series (the latest
series does not support it), then backlight control does not work.

This is caused by commit 3dbc80a3e4c5 ("ACPI: video: Make backlight
class device registration a separate step (v2)") combined with
commit 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default").

After these changes the acpi_video# backlight device is only registered
when requested by a GPU driver calling acpi_video_register_backlight()
which the nvidia binary driver does not do.

I realize that using the nvidia binary driver is not a supported use-case
and users can workaround this by adding acpi_backlight=video on the kernel
commandline, but the ThinkPad W530 is a popular model under Linux users,
so it seems worthwhile to add a quirk for this.

I will also email Nvidia asking them to make the driver call
acpi_video_register_backlight() when an internal LCD panel is detected.
So maybe the next maintenance release of the drivers will fix this...

Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2

commit 2699107989431d6db44f8a9e809ea74c387336d1 upstream.

On the Apple iMac14,1 and iMac14,2 all-in-ones (monitors with builtin "PC")
the connection between the GPU and the panel is seen by the GPU driver as
regular DP instead of eDP, causing the GPU driver to never call
acpi_video_register_backlight().

(GPU drivers only call acpi_video_register_backlight() when an internal
 panel is detected, to avoid non working acpi_video# devices getting
 registered on desktops which unfortunately is a real issue.)

Fix the missing acpi_video# backlight device on these all-in-ones by
adding a acpi_backlight=video DMI quirk, so that video.ko will
immediately register the backlight device instead of waiting for
an acpi_video_register_backlight() call.

Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: video: Make acpi_backlight=video work independent from GPU driver

commit e506731c8f35699d746c615164ed620cd53c00ca upstream.

Commit 3dbc80a3e4c5 ("ACPI: video: Make backlight class device
registration a separate step (v2)") combined with
commit 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default")

Means that the video.ko code now fully depends on the GPU driver calling
acpi_video_register_backlight() for the acpi_video# backlight class
devices to get registered.

This means that if the GPU driver does not do this, acpi_backlight=video
on the cmdline, or DMI quirks for selecting acpi_video# will not work.

This is a problem on for example Apple iMac14,1 all-in-ones where
the monitor's LCD panel shows up as a regular DP connection instead of
eDP so the GPU driver will not call acpi_video_register_backlight() [1].

Fix this by making video.ko directly register the acpi_video# devices
when these have been explicitly requested either on the cmdline or
through DMI quirks (rather then auto-detection being used).

[1] GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.

Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()

commit 78dfc9d1d1abb9e400386fa9c5724a8f7d75e3b9 upstream.

Allow callers of __acpi_video_get_backlight_type() to pass a pointer
to a bool which will get set to false if the backlight-type comes from
the cmdline or a DMI quirk and set to true if auto-detection was used.

And make __acpi_video_get_backlight_type() non static so that it can
be called directly outside of video_detect.c .

While at it turn the acpi_video_get_backlight_type() and
acpi_video_backlight_use_native() wrappers into static inline functions
in include/acpi/video.h, so that we need to export one less symbol.

Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos

commit 0145462fc802cd447ef5d029758043c7f15b4b1e upstream.

isotp.c was still using sock_recv_timestamp() which does not provide
control messages to detect dropped PDUs in the receive path.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230330170248.62342-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>