tty: serial: 8250_mtk: always resume the device in probe.

commit 100bc3e2bebf95506da57cbdf5f26b25f6da4c81 upstream.

serial8250_register_8250_port calls uart_config_port, which calls
config_port on the port before it tries to power on the port. So we need
the port to be on before calling serial8250_register_8250_port. Change
the code to always do a runtime resume in probe before registering port,
and always do a runtime suspend in remove.

This basically reverts the change in commit 68e5fc4a255a ("tty: serial:
8250_mtk: use pm_runtime callbacks for enabling"), but still use
pm_runtime callbacks.

Fixes: 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling")
Signed-off-by: Peter Shih <pihsun@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Offload the handling of channels to two workqueues

commit 37c2578c0c40e286bc0d30bdc05290b2058cf66e upstream.

vmbus_process_offer() mustn't call channel->sc_creation_callback()
directly for sub-channels, because sc_creation_callback() ->
vmbus_open() may never get the host's response to the
OPEN_CHANNEL message (the host may rescind a channel at any time,
e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind()
may not wake up the vmbus_open() as it's blocked due to a non-zero
vmbus_connection.offer_in_progress, and finally we have a deadlock.

The above is also true for primary channels, if the related device
drivers use sync probing mode by default.

And, usually the handling of primary channels and sub-channels can
depend on each other, so we should offload them to different
workqueues to avoid possible deadlock, e.g. in sync-probing mode,
NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() ->
rtnl_lock(), and causes deadlock: the former gets the rtnl_lock
and waits for all the sub-channels to appear, but the latter
can't get the rtnl_lock and this blocks the handling of sub-channels.

The patch can fix the multiple-NIC deadlock described above for
v3.x kernels (e.g. RHEL 7.x) which don't support async-probing
of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing
but don't enable async-probing for Hyper-V drivers (yet).

The patch can also fix the hang issue in sub-channel's handling described
above for all versions of kernels, including v4.19 and v4.20-rc4.

So actually the patch should be applied to all the existing kernels,
not only the kernels that have 8195b1396ec8.

Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug")
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gmc8: update MC firmware for polaris

commit a81a7c9c9ea3042ab02d66ac35def74abf091c15 upstream.

Some variants require different MC firmware images.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: update mc firmware image for polaris12 variants

commit d7fd67653f847327e545bdb198b901ee124afd7c upstream.

Some new variants require updated firmware.

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert commit ef9209b642f "staging: rtl8723bs: Fix indenting errors and an off-by-one mistake in core/rtw_mlme_ext.c"

commit 87e4a5405f087427fbf8b437d2796283dce2b38f upstream.

pstapriv->max_num_sta is always <= NUM_STA, since max_num_sta is either
set in _rtw_init_sta_priv() or rtw_set_beacon().

Fixes: ef9209b642f1 ("staging: rtl8723bs: Fix indenting errors and an off-by-one mistake in core/rtw_mlme_ext.c")
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Fix possible buffer overrun

commit 300cd664865bed5d50ae0a42fb4e3a6f415e8a10 upstream.

In commit 8b7a13c3f404 ("staging: r8712u: Fix possible buffer
overrun") we fix a potential off by one by making the limit smaller.
The better fix is to make the buffer larger.  This makes it match up
with the similar code in other drivers.

Fixes: 8b7a13c3f404 ("staging: r8712u: Fix possible buffer overrun")
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix separator when building path from dentry

commit c988de29ca161823db6a7125e803d597ef75b49c upstream.

Make sure to use the CIFS_DIR_SEP(cifs_sb) as path separator for
prefixpath too. Fixes a bug with smb1 UNIX extensions.

Fixes: a6b5058fafdf ("fs/cifs: make share unaccessible at root level mountable")
Signed-off-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: atomisp: remove "fun" strncpy warning

[for older kernels only, atomisp has been removed from upstream]

gcc-8 rightfully warns that this instance of strncpy is just copying
from the source, to the same source, for a few bytes.  Meaning this call
does nothing.  As the author of the code obviously meant it to do
something, but this code must be working properly, just replace the call
to the kernel internal strscpy() which gcc doesn't know about, so the
warning goes away.

As this driver was deleted from newer kernel versions, none of this
really matters but now at least we do not have to worry about a build
warning in the stable trees.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: remove two build warnings

[for older kernels only, lustre has been removed from upstream]

When someone writes:
strncpy(dest, source, sizeof(source));
they really are just doing the same thing as:
strcpy(dest, source);
but somehow they feel better because they are now using the "safe"
version of the string functions.  Cargo-cult programming at its
finest...

gcc-8 rightfully warns you about doing foolish things like this.  Now
that the stable kernels are all starting to be built using gcc-8, let's
get rid of this warning so that we do not have to gaze at this horror.

To dropt the warning, just convert the code to using strcpy() so that if
someone really wants to audit this code and find all of the obvious
problems, it will be easier to do so.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

swiotlb: clean up reporting

commit 7d63fb3af87aa67aa7d24466e792f9d7c57d8e79 upstream.

This removes needless use of '%p', and refactors the printk calls to
use pr_*() helpers instead.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[bwh: Backported to 4.14:
 - Adjust filename
 - Remove "swiotlb: " prefix from an additional log message]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to do sanity check with block address in main area v2

commit 91291e9998d208370eb8156c760691b873bd7522 upstream.

This patch adds f2fs_is_valid_blkaddr() in below functions to do sanity
check with block address to avoid pentential panic:
- f2fs_grab_read_bio()
- __written_first_block()

https://bugzilla.kernel.org/show_bug.cgi?id=200465

- Reproduce

- POC (poc.c)
    #define _GNU_SOURCE
    #include <sys/types.h>
    #include <sys/mount.h>
    #include <sys/mman.h>
    #include <sys/stat.h>
    #include <sys/xattr.h>

    #include <dirent.h>
    #include <errno.h>
    #include <error.h>
    #include <fcntl.h>
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <unistd.h>

    #include <linux/falloc.h>
    #include <linux/loop.h>

    static void activity(char *mpoint) {

      char *xattr;
      int err;

      err = asprintf(&xattr, "%s/foo/bar/xattr", mpoint);

      char buf2[113];
      memset(buf2, 0, sizeof(buf2));
      listxattr(xattr, buf2, sizeof(buf2));

    }

    int main(int argc, char *argv[]) {
      activity(argv[1]);
      return 0;
    }

- kernel message
[  844.718738] F2FS-fs (loop0): Mounted with checkpoint version = 2
[  846.430929] F2FS-fs (loop0): access invalid blkaddr:1024
[  846.431058] WARNING: CPU: 1 PID: 1249 at fs/f2fs/checkpoint.c:154 f2fs_is_valid_blkaddr+0x10f/0x160
[  846.431059] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper
[  846.431310] CPU: 1 PID: 1249 Comm: a.out Not tainted 4.18.0-rc3+ #1
[  846.431312] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  846.431315] RIP: 0010:f2fs_is_valid_blkaddr+0x10f/0x160
[  846.431316] Code: 00 eb ed 31 c0 83 fa 05 75 ae 48 83 ec 08 48 8b 3f 89 f1 48 c7 c2 fc 0b 0f 8b 48 c7 c6 8b d7 09 8b 88 44 24 07 e8 61 8b ff ff <0f> 0b 0f b6 44 24 07 48 83 c4 08 eb 81 4c 8b 47 10 8b 8f 38 04 00
[  846.431347] RSP: 0018:ffff961c414a7bc0 EFLAGS: 00010282
[  846.431349] RAX: 0000000000000000 RBX: ffffc5f787b8ea80 RCX: 0000000000000000
[  846.431350] RDX: 0000000000000000 RSI: ffff89dfffd165d8 RDI: ffff89dfffd165d8
[  846.431351] RBP: ffff961c414a7c20 R08: 0000000000000001 R09: 0000000000000248
[  846.431353] R10: 0000000000000000 R11: 0000000000000248 R12: 0000000000000007
[  846.431369] R13: ffff89dff5492800 R14: ffff89dfae3aa000 R15: ffff89dff4ff88d0
[  846.431372] FS:  00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000
[  846.431373] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.431374] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0
[  846.431384] Call Trace:
[  846.431426]  f2fs_iget+0x6f4/0xe70
[  846.431430]  ? f2fs_find_entry+0x71/0x90
[  846.431432]  f2fs_lookup+0x1aa/0x390
[  846.431452]  __lookup_slow+0x97/0x150
[  846.431459]  lookup_slow+0x35/0x50
[  846.431462]  walk_component+0x1c6/0x470
[  846.431479]  ? memcg_kmem_charge_memcg+0x70/0x90
[  846.431488]  ? page_add_file_rmap+0x13/0x200
[  846.431491]  path_lookupat+0x76/0x230
[  846.431501]  ? __alloc_pages_nodemask+0xfc/0x280
[  846.431504]  filename_lookup+0xb8/0x1a0
[  846.431534]  ? _cond_resched+0x16/0x40
[  846.431541]  ? kmem_cache_alloc+0x160/0x1d0
[  846.431549]  ? path_listxattr+0x41/0xa0
[  846.431551]  path_listxattr+0x41/0xa0
[  846.431570]  do_syscall_64+0x55/0x100
[  846.431583]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  846.431607] RIP: 0033:0x7f882de1c0d7
[  846.431607] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48
[  846.431639] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2
[  846.431641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7
[  846.431642] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0
[  846.431643] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000
[  846.431645] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550
[  846.431646] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000
[  846.431648] ---[ end trace abca54df39d14f5c ]---
[  846.431651] F2FS-fs (loop0): invalid blkaddr: 1024, type: 5, run fsck to fix.
[  846.431762] WARNING: CPU: 1 PID: 1249 at fs/f2fs/f2fs.h:2697 f2fs_iget+0xd17/0xe70
[  846.431763] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper
[  846.431797] CPU: 1 PID: 1249 Comm: a.out Tainted: G        W         4.18.0-rc3+ #1
[  846.431798] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  846.431800] RIP: 0010:f2fs_iget+0xd17/0xe70
[  846.431801] Code: ff ff 48 63 d8 e9 e1 f6 ff ff 48 8b 45 c8 41 b8 05 00 00 00 48 c7 c2 d8 e8 0e 8b 48 c7 c6 1d b0 0a 8b 48 8b 38 e8 f9 b4 00 00 <0f> 0b 48 8b 45 c8 f0 80 48 48 04 e9 d8 f9 ff ff 0f 0b 48 8b 43 18
[  846.431832] RSP: 0018:ffff961c414a7bd0 EFLAGS: 00010282
[  846.431834] RAX: 0000000000000000 RBX: ffffc5f787b8ea80 RCX: 0000000000000006
[  846.431835] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff89dfffd165d0
[  846.431836] RBP: ffff961c414a7c20 R08: 0000000000000000 R09: 0000000000000273
[  846.431837] R10: 0000000000000000 R11: ffff89dfad50ca60 R12: 0000000000000007
[  846.431838] R13: ffff89dff5492800 R14: ffff89dfae3aa000 R15: ffff89dff4ff88d0
[  846.431840] FS:  00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000
[  846.431841] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.431842] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0
[  846.431846] Call Trace:
[  846.431850]  ? f2fs_find_entry+0x71/0x90
[  846.431853]  f2fs_lookup+0x1aa/0x390
[  846.431856]  __lookup_slow+0x97/0x150
[  846.431858]  lookup_slow+0x35/0x50
[  846.431874]  walk_component+0x1c6/0x470
[  846.431878]  ? memcg_kmem_charge_memcg+0x70/0x90
[  846.431880]  ? page_add_file_rmap+0x13/0x200
[  846.431882]  path_lookupat+0x76/0x230
[  846.431884]  ? __alloc_pages_nodemask+0xfc/0x280
[  846.431886]  filename_lookup+0xb8/0x1a0
[  846.431890]  ? _cond_resched+0x16/0x40
[  846.431891]  ? kmem_cache_alloc+0x160/0x1d0
[  846.431894]  ? path_listxattr+0x41/0xa0
[  846.431896]  path_listxattr+0x41/0xa0
[  846.431898]  do_syscall_64+0x55/0x100
[  846.431901]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  846.431902] RIP: 0033:0x7f882de1c0d7
[  846.431903] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48
[  846.431934] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2
[  846.431936] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7
[  846.431937] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0
[  846.431939] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000
[  846.431940] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550
[  846.431941] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000
[  846.431943] ---[ end trace abca54df39d14f5d ]---
[  846.432033] F2FS-fs (loop0): access invalid blkaddr:1024
[  846.432051] WARNING: CPU: 1 PID: 1249 at fs/f2fs/checkpoint.c:154 f2fs_is_valid_blkaddr+0x10f/0x160
[  846.432051] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper
[  846.432085] CPU: 1 PID: 1249 Comm: a.out Tainted: G        W         4.18.0-rc3+ #1
[  846.432086] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  846.432089] RIP: 0010:f2fs_is_valid_blkaddr+0x10f/0x160
[  846.432089] Code: 00 eb ed 31 c0 83 fa 05 75 ae 48 83 ec 08 48 8b 3f 89 f1 48 c7 c2 fc 0b 0f 8b 48 c7 c6 8b d7 09 8b 88 44 24 07 e8 61 8b ff ff <0f> 0b 0f b6 44 24 07 48 83 c4 08 eb 81 4c 8b 47 10 8b 8f 38 04 00
[  846.432120] RSP: 0018:ffff961c414a7900 EFLAGS: 00010286
[  846.432122] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000006
[  846.432123] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff89dfffd165d0
[  846.432124] RBP: ffff89dff5492800 R08: 0000000000000001 R09: 000000000000029d
[  846.432125] R10: ffff961c414a7820 R11: 000000000000029d R12: 0000000000000400
[  846.432126] R13: 0000000000000000 R14: ffff89dff4ff88d0 R15: 0000000000000000
[  846.432128] FS:  00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000
[  846.432130] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.432131] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0
[  846.432135] Call Trace:
[  846.432151]  f2fs_wait_on_block_writeback+0x20/0x110
[  846.432158]  f2fs_grab_read_bio+0xbc/0xe0
[  846.432161]  f2fs_submit_page_read+0x21/0x280
[  846.432163]  f2fs_get_read_data_page+0xb7/0x3c0
[  846.432165]  f2fs_get_lock_data_page+0x29/0x1e0
[  846.432167]  f2fs_get_new_data_page+0x148/0x550
[  846.432170]  f2fs_add_regular_entry+0x1d2/0x550
[  846.432178]  ? __switch_to+0x12f/0x460
[  846.432181]  f2fs_add_dentry+0x6a/0xd0
[  846.432184]  f2fs_do_add_link+0xe9/0x140
[  846.432186]  __recover_dot_dentries+0x260/0x280
[  846.432189]  f2fs_lookup+0x343/0x390
[  846.432193]  __lookup_slow+0x97/0x150
[  846.432195]  lookup_slow+0x35/0x50
[  846.432208]  walk_component+0x1c6/0x470
[  846.432212]  ? memcg_kmem_charge_memcg+0x70/0x90
[  846.432215]  ? page_add_file_rmap+0x13/0x200
[  846.432217]  path_lookupat+0x76/0x230
[  846.432219]  ? __alloc_pages_nodemask+0xfc/0x280
[  846.432221]  filename_lookup+0xb8/0x1a0
[  846.432224]  ? _cond_resched+0x16/0x40
[  846.432226]  ? kmem_cache_alloc+0x160/0x1d0
[  846.432228]  ? path_listxattr+0x41/0xa0
[  846.432230]  path_listxattr+0x41/0xa0
[  846.432233]  do_syscall_64+0x55/0x100
[  846.432235]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  846.432237] RIP: 0033:0x7f882de1c0d7
[  846.432237] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48
[  846.432269] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2
[  846.432271] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7
[  846.432272] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0
[  846.432273] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000
[  846.432274] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550
[  846.432275] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000
[  846.432277] ---[ end trace abca54df39d14f5e ]---
[  846.432279] F2FS-fs (loop0): invalid blkaddr: 1024, type: 5, run fsck to fix.
[  846.432376] WARNING: CPU: 1 PID: 1249 at fs/f2fs/f2fs.h:2697 f2fs_wait_on_block_writeback+0xb1/0x110
[  846.432376] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper
[  846.432410] CPU: 1 PID: 1249 Comm: a.out Tainted: G        W         4.18.0-rc3+ #1
[  846.432411] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  846.432413] RIP: 0010:f2fs_wait_on_block_writeback+0xb1/0x110
[  846.432414] Code: 66 90 f0 ff 4b 34 74 59 5b 5d c3 48 8b 7d 00 41 b8 05 00 00 00 89 d9 48 c7 c2 d8 e8 0e 8b 48 c7 c6 1d b0 0a 8b e8 df bc fd ff <0f> 0b f0 80 4d 48 04 e9 67 ff ff ff 48 8b 03 48 c1 e8 37 83 e0 07
[  846.432445] RSP: 0018:ffff961c414a7910 EFLAGS: 00010286
[  846.432447] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000006
[  846.432448] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff89dfffd165d0
[  846.432449] RBP: ffff89dff5492800 R08: 0000000000000000 R09: 00000000000002d1
[  846.432450] R10: ffff961c414a7820 R11: ffff89dfad50cf80 R12: 0000000000000400
[  846.432451] R13: 0000000000000000 R14: ffff89dff4ff88d0 R15: 0000000000000000
[  846.432453] FS:  00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000
[  846.432454] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.432455] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0
[  846.432459] Call Trace:
[  846.432463]  f2fs_grab_read_bio+0xbc/0xe0
[  846.432464]  f2fs_submit_page_read+0x21/0x280
[  846.432466]  f2fs_get_read_data_page+0xb7/0x3c0
[  846.432468]  f2fs_get_lock_data_page+0x29/0x1e0
[  846.432470]  f2fs_get_new_data_page+0x148/0x550
[  846.432473]  f2fs_add_regular_entry+0x1d2/0x550
[  846.432475]  ? __switch_to+0x12f/0x460
[  846.432477]  f2fs_add_dentry+0x6a/0xd0
[  846.432480]  f2fs_do_add_link+0xe9/0x140
[  846.432483]  __recover_dot_dentries+0x260/0x280
[  846.432485]  f2fs_lookup+0x343/0x390
[  846.432488]  __lookup_slow+0x97/0x150
[  846.432490]  lookup_slow+0x35/0x50
[  846.432505]  walk_component+0x1c6/0x470
[  846.432509]  ? memcg_kmem_charge_memcg+0x70/0x90
[  846.432511]  ? page_add_file_rmap+0x13/0x200
[  846.432513]  path_lookupat+0x76/0x230
[  846.432515]  ? __alloc_pages_nodemask+0xfc/0x280
[  846.432517]  filename_lookup+0xb8/0x1a0
[  846.432520]  ? _cond_resched+0x16/0x40
[  846.432522]  ? kmem_cache_alloc+0x160/0x1d0
[  846.432525]  ? path_listxattr+0x41/0xa0
[  846.432526]  path_listxattr+0x41/0xa0
[  846.432529]  do_syscall_64+0x55/0x100
[  846.432531]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  846.432533] RIP: 0033:0x7f882de1c0d7
[  846.432533] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48
[  846.432565] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2
[  846.432567] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7
[  846.432568] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0
[  846.432569] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000
[  846.432570] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550
[  846.432571] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000
[  846.432573] ---[ end trace abca54df39d14f5f ]---
[  846.434280] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  846.434424] PGD 80000001ebd3a067 P4D 80000001ebd3a067 PUD 1eb1ae067 PMD 0
[  846.434551] Oops: 0000 [#1] SMP PTI
[  846.434697] CPU: 0 PID: 44 Comm: kworker/u5:0 Tainted: G        W         4.18.0-rc3+ #1
[  846.434805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  846.435000] Workqueue: fscrypt_read_queue decrypt_work
[  846.435174] RIP: 0010:fscrypt_do_page_crypto+0x6e/0x2d0
[  846.435351] Code: 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 88 00 00 00 31 c0 e8 43 c2 e0 ff 49 8b 86 48 02 00 00 85 ed c7 44 24 70 00 00 00 00 <48> 8b 58 08 0f 84 14 02 00 00 48 8b 78 10 48 8b 0c 24 48 c7 84 24
[  846.435696] RSP: 0018:ffff961c40f9bd60 EFLAGS: 00010206
[  846.435870] RAX: 0000000000000000 RBX: ffffc5f787719b80 RCX: ffffc5f787719b80
[  846.436051] RDX: ffffffff8b9f4b88 RSI: ffffffff8b0ae622 RDI: ffff961c40f9bdb8
[  846.436261] RBP: 0000000000001000 R08: ffffc5f787719b80 R09: 0000000000001000
[  846.436433] R10: 0000000000000018 R11: fefefefefefefeff R12: ffffc5f787719b80
[  846.436562] R13: ffffc5f787719b80 R14: ffff89dff4ff88d0 R15: 0ffff89dfaddee60
[  846.436658] FS:  0000000000000000(0000) GS:ffff89dfffc00000(0000) knlGS:0000000000000000
[  846.436758] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.436898] CR2: 0000000000000008 CR3: 00000001eddd0000 CR4: 00000000000006f0
[  846.437001] Call Trace:
[  846.437181]  ? check_preempt_wakeup+0xf2/0x230
[  846.437276]  ? check_preempt_curr+0x7c/0x90
[  846.437370]  fscrypt_decrypt_page+0x48/0x4d
[  846.437466]  __fscrypt_decrypt_bio+0x5b/0x90
[  846.437542]  decrypt_work+0x12/0x20
[  846.437651]  process_one_work+0x15e/0x3d0
[  846.437740]  worker_thread+0x4c/0x440
[  846.437848]  kthread+0xf8/0x130
[  846.437938]  ? rescuer_thread+0x350/0x350
[  846.438022]  ? kthread_associate_blkcg+0x90/0x90
[  846.438117]  ret_from_fork+0x35/0x40
[  846.438201] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper
[  846.438653] CR2: 0000000000000008
[  846.438713] ---[ end trace abca54df39d14f60 ]---
[  846.438796] RIP: 0010:fscrypt_do_page_crypto+0x6e/0x2d0
[  846.438844] Code: 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 88 00 00 00 31 c0 e8 43 c2 e0 ff 49 8b 86 48 02 00 00 85 ed c7 44 24 70 00 00 00 00 <48> 8b 58 08 0f 84 14 02 00 00 48 8b 78 10 48 8b 0c 24 48 c7 84 24
[  846.439084] RSP: 0018:ffff961c40f9bd60 EFLAGS: 00010206
[  846.439176] RAX: 0000000000000000 RBX: ffffc5f787719b80 RCX: ffffc5f787719b80
[  846.440927] RDX: ffffffff8b9f4b88 RSI: ffffffff8b0ae622 RDI: ffff961c40f9bdb8
[  846.442083] RBP: 0000000000001000 R08: ffffc5f787719b80 R09: 0000000000001000
[  846.443284] R10: 0000000000000018 R11: fefefefefefefeff R12: ffffc5f787719b80
[  846.444448] R13: ffffc5f787719b80 R14: ffff89dff4ff88d0 R15: 0ffff89dfaddee60
[  846.445558] FS:  0000000000000000(0000) GS:ffff89dfffc00000(0000) knlGS:0000000000000000
[  846.446687] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.447796] CR2: 0000000000000008 CR3: 00000001eddd0000 CR4: 00000000000006f0

- Location
https://elixir.bootlin.com/linux/v4.18-rc4/source/fs/crypto/crypto.c#L149
struct crypto_skcipher *tfm = ci->ci_ctfm;
Here ci can be NULL

Note that this issue maybe require CONFIG_F2FS_FS_ENCRYPTION=y to reproduce.

Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[bwh: Backported to 4.14: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: Prevent U1/U2 link pm states if exit latency is too long

commit 0472bf06c6fd33c1a18aaead4c8f91e5a03d8d7b upstream.

Don't allow USB3 U1 or U2 if the latency to wake up from the U-state
reaches the service interval for a periodic endpoint.

This is according to xhci 1.1 specification section 4.23.5.2 extra note:

"Software shall ensure that a device is prevented from entering a U-state
 where its worst case exit latency approaches the ESIT."

Allowing too long exit latencies for periodic endpoint confuses xHC
internal scheduling, and new devices may fail to enumerate with a
"Not enough bandwidth for new device state" error from the host.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: workaround CSS timeout on AMD SNPS 3.0 xHC

commit a7d57abcc8a5bdeb53bbf8e87558e8e0a2c2a29d upstream.

Occasionally AMD SNPS 3.0 xHC does not respond to
CSS when set, also it does not flag anything on SRE and HCE
to point the internal xHC errors on USBSTS register. This stalls
the entire system wide suspend and there is no point in stalling
just because of xHC CSS is not responding.

To work around this problem, if the xHC does not flag
anything on SRE and HCE, we can skip the CSS
timeout and allow the system to continue the suspend. Once the
system resume happens we can internally reset the controller
using XHCI_RESET_ON_RESUME quirk

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com>
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Cc: <stable@vger.kernel.org>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE

commit e46daee53bb50bde38805f1823a182979724c229 upstream.

The arm compiler internally interprets an inline assembly label
as an unsigned long value, not a pointer. As a result, under
CONFIG_FORTIFY_SOURCE, the address of a label has a size of 4 bytes,
which was tripping the runtime checks. Instead, we can just cast the label
(as done with the size calculations earlier).

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1639397

Reported-by: William Cohen <wcohen@redhat.com>
Fixes: 6974f0c4555e ("include/linux/string.h: add the option of fortified string.h functions")
Cc: stable@vger.kernel.org
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: William Cohen <wcohen@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: cppi41: delete channel from pending list when stop channel

commit 59861547ec9a9736e7882f6fb0c096a720ff811a upstream.

The driver defines three states for a cppi channel.
- idle: .chan_busy == 0 && not in .pending list
- pending: .chan_busy == 0 && in .pending list
- busy: .chan_busy == 1 && not in .pending list

There are cases in which the cppi channel could be in the pending state
when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend()
is called.

cppi41_stop_chan() has a bug for these cases to set channels to idle state.
It only checks the .chan_busy flag, but not the .pending list, then later
when cppi41_runtime_resume() is called the channels in .pending list will
be transitioned to busy state.

Removing channels from the .pending list solves the problem.

Fixes: 975faaeb9985 ("dma: cppi41: start tear down only if channel is busy")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Bin Liu <b-liu@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: dw: Fix FIFO size for Intel Merrifield

commit ffe843b18211301ad25893eba09f402c19d12304 upstream.

Intel Merrifield has a reduced size of FIFO used in iDMA 32-bit controller,
i.e. 512 bytes instead of 1024.

Fix this by partitioning it as 64 bytes per channel.

Note, in the future we might switch to 'fifo-size' property instead of
hard coded value.

Fixes: 199244d69458 ("dmaengine: dw: add support of iDMA 32-bit hardware")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Fix leak of krb5p encode pages

commit 8dae5398ab1ac107b1517e8195ed043d5f422bd0 upstream.

call_encode can be invoked more than once per RPC call. Ensure that
each call to gss_wrap_req_priv does not overwrite pointers to
previously allocated memory.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost/vsock: fix use-after-free in network stack callers

commit 834e772c8db0c6a275d75315d90aba4ebbb1e249 upstream.

If the network stack calls .send_pkt()/.cancel_pkt() during .release(),
a struct vhost_vsock use-after-free is possible.  This occurs because
.release() does not wait for other CPUs to stop using struct
vhost_vsock.

Switch to an RCU-enabled hashtable (indexed by guest CID) so that
.release() can wait for other CPUs by calling synchronize_rcu().  This
also eliminates vhost_vsock_lock acquisition in the data path so it
could have a positive effect on performance.

This is CVE-2018-14625 "kernel: use-after-free Read in vhost_transport_send_pkt".

Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+bd391451452fb0b93039@syzkaller.appspotmail.com
Reported-by: syzbot+e3e074963495f92a89ed@syzkaller.appspotmail.com
Reported-by: syzbot+d5a0a170c5069658b141@syzkaller.appspotmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio/s390: fix race in ccw_io_helper()

commit 78b1a52e05c9db11d293342e8d6d8a230a04b4e7 upstream.

While ccw_io_helper() seems like intended to be exclusive in a sense that
it is supposed to facilitate I/O for at most one thread at any given
time, there is actually nothing ensuring that threads won't pile up at
vcdev->wait_q. If they do, all threads get woken up and see the status
that belongs to some other request than their own. This can lead to bugs.
For an example see:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788432

This race normally does not cause any problems. The operations provided
by struct virtio_config_ops are usually invoked in a well defined
sequence, normally don't fail, and are normally used quite infrequent
too.

Yet, if some of the these operations are directly triggered via sysfs
attributes, like in the case described by the referenced bug, userspace
is given an opportunity to force races by increasing the frequency of the
given operations.

Let us fix the problem by ensuring, that for each device, we finish
processing the previous request before starting with a new one.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Cc: stable@vger.kernel.org
Message-Id: <20180925121309.58524-3-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio/s390: avoid race on vcdev->config

commit 2448a299ec416a80f699940a86f4a6d9a4f643b1 upstream.

Currently we have a race on vcdev->config in virtio_ccw_get_config() and
in virtio_ccw_set_config().

This normally does not cause problems, as these are usually infrequent
operations. However, for some devices writing to/reading from the config
space can be triggered through sysfs attributes. For these, userspace can
force the race by increasing the frequency.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org
Message-Id: <20180925121309.58524-2-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570

commit 54947cd64c1b8290f64bb2958e343c07270e3a58 upstream.

We've got a regression report for some Thinkpad models (at least
T570s) which shows the too low speaker output volume.  The bisection
leaded to the commit 61fcf8ece9b6 ("ALSA: hda/realtek - Enable Thinkpad
Dock device for ALC298 platform"), and it's basically adding the two
pin configurations for the dock, and looks harmless.

The real culprit seems, though, that the DAC assignment for the
speaker pin is implicitly assumed on these devices, i.e. pin NID 0x14
to be coupled with DAC NID 0x03.  When more pins are configured by the
commit above, the auto-parser changes the DAC assignment, and this
resulted in the regression.

As a workaround, just provide the fixed pin / DAC mapping table for
this Thinkpad fixup function.  It's no generic solution, but the
problem itself is pretty much device-specific, so must be good
enough.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1554304
Fixes: 61fcf8ece9b6 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Fix interval evaluation with openmin/max

commit 5363857b916c1f48027e9b96ee8be8376bf20811 upstream.

As addressed in alsa-lib (commit b420056604f0), we need to fix the
case where the evaluation of PCM interval "(x x+1]" leading to
-EINVAL.  After applying rules, such an interval may be translated as
"(x x+1)".

Fixes: ff2d6acdf6f1 ("ALSA: pcm: Fix snd_interval_refine first/last with open min/max")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Call snd_pcm_unlink() conditionally at closing

commit b51abed8355e5556886623b2772fa6b7598d2282 upstream.

Currently the PCM core calls snd_pcm_unlink() always unconditionally
at closing a stream.  However, since snd_pcm_unlink() invokes the
global rwsem down, the lock can be easily contended.  More badly, when
a thread runs in a high priority RT-FIFO, it may stall at spinning.

Basically the call of snd_pcm_unlink() is required only for the linked
streams that are already rare occasion.  For normal use cases, this
code path is fairly superfluous.

As an optimization (and also as a workaround for the RT problem
above in normal situations without linked streams), this patch adds a
check before calling snd_pcm_unlink() and calls it only when needed.

Reported-by: Chanho Min <chanho.min@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Fix starvation on down_write_nonblock()

commit b888a5f713e4d17faaaff24316585a4eb07f35b7 upstream.

Commit 67ec1072b053 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM
stream") fixes deadlock for non-atomic PCM stream. But, This patch
causes antother stuck.
If writer is RT thread and reader is a normal thread, the reader
thread will be difficult to get scheduled. It may not give chance to
release readlocks and writer gets stuck for a long time if they are
pinned to single cpu.

The deadlock described in the previous commit is because the linux
rwsem queues like a FIFO. So, we might need non-FIFO writelock, not
non-block one.

My suggestion is that the writer gives reader a chance to be scheduled
by using the minimum msleep() instaed of spinning without blocking by
writer. Also, The *_nonblock may be changed to *_nonfifo appropriately
to this concept.
In terms of performance, when trylock is failed, this minimum periodic
msleep will have the same performance as the tick-based
schedule()/wake_up_q().

[ Although this has a fairly high performance penalty, the relevant
  code path became already rare due to the previous commit ("ALSA:
  pcm: Call snd_pcm_unlink() conditionally at closing").  That is, now
  this unconditional msleep appears only when using linked streams,
  and this must be a rare case.  So we accept this as a quick
  workaround until finding a more suitable one -- tiwai ]

Fixes: 67ec1072b053 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream")
Suggested-by: Wonmin Jung <wonmin.jung@lge.com>
Signed-off-by: Chanho Min <chanho.min@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Add support for AMD Stoney Ridge

commit 3deef52ce10514ccdebba8e8ab85f9cebd0eb3f7 upstream.

It's similar to other AMD audio devices, it also supports D3, which can
save some power drain.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix UAF decrement if card has no live interfaces in card.c

commit 5f8cf712582617d523120df67d392059eaf2fc4b upstream.

If a USB sound card reports 0 interfaces, an error condition is triggered
and the function usb_audio_probe errors out. In the error path, there was a
use-after-free vulnerability where the memory object of the card was first
freed, followed by a decrement of the number of active chips. Moving the
decrement above the atomic_dec fixes the UAF.

[ The original problem was introduced in 3.1 kernel, while it was
  developed in a different form.  The Fixes tag below indicates the
  original commit but it doesn't mean that the patch is applicable
  cleanly. -- tiwai ]

Fixes: 362e4e49abe5 ("ALSA: usb-audio - clear chip->probing on error exit")
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: check usb_get_extra_descriptor for proper size

commit 704620afc70cf47abb9d6a1a57f3825d2bca49cf upstream.

When reading an extra descriptor, we need to properly check the minimum
and maximum size allowed, to prevent from invalid data being sent by a
device.

Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: appledisplay: Add 27" Apple Cinema Display

commit d7859905301880ad3e16272399d26900af3ac496 upstream.

Add another Apple Cinema Display to the list of supported displays.

Signed-off-by: Alexander Theissen <alex.theissen@me.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirk: add no-LPM quirk on SanDisk Ultra Flair device

commit 2f2dde6ba89b1ef1fe23c1138131b315d9aa4019 upstream.

Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is
in 0781:5591, will aggressively request LPM of U1/U2 during runtime,
when using this thumb drive as the OS installation key we found the
device will generate failure during U1 exit path making it dropped
from the USB bus, this causes a corrupted installation in system at
the end.

i.e.,
[  166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004
[  166.918327] usb usb2-port2: link state change
[  166.918337] usb usb2-port2: do warm reset
[  166.970039] usb usb2-port2: not warm reset yet, waiting 50ms
[  167.022040] usb usb2-port2: not warm reset yet, waiting 200ms
[  167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s
[  167.276050] usb 2-2: USB disconnect, device number 2
[  167.276058] usb 2-2: unregistering device
[  167.276060] usb 2-2: unregistering interface 2-2:1.0
[  167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk
[  167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00
...

Analyzed the USB trace in the link layer we realized it is because
of the 6-ms timer of tRecoveryConfigurationTimeout which documented
on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from
Recovery.Configuration"; device initiates U1 exit -> Recovery.Active
-> Recovery.Configuration, then the host timer timeout makes the link
transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset.

Interestingly, the other higher volume of SanDisk Ultra Flair sharing
the same VID:PID, such as 64GB, would not request LPM during runtime,
it sticks at U0 always, thus disabling LPM does not affect those thumb
drives at all.

The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583.

Signed-off-by: Harry Pan <harry.pan@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: don't warn about allocations which stall for too long

[ Upstream commit 400e22499dd92613821374c8c6c88c7225359980 ]

Commit 63f53dea0c98 ("mm: warn about allocations which stall for too
long") was a great step for reducing possibility of silent hang up
problem caused by memory allocation stalls.  But this commit reverts it,
for it is possible to trigger OOM lockup and/or soft lockups when many
threads concurrently called warn_alloc() (in order to warn about memory
allocation stalls) due to current implementation of printk(), and it is
difficult to obtain useful information due to limitation of synchronous
warning approach.

Current printk() implementation flushes all pending logs using the
context of a thread which called console_unlock().  printk() should be
able to flush all pending logs eventually unless somebody continues
appending to printk() buffer.

Since warn_alloc() started appending to printk() buffer while waiting
for oom_kill_process() to make forward progress when oom_kill_process()
is processing pending logs, it became possible for warn_alloc() to force
oom_kill_process() loop inside printk().  As a result, warn_alloc()
significantly increased possibility of preventing oom_kill_process()
from making forward progress.

---------- Pseudo code start ----------
Before warn_alloc() was introduced:

  retry:
    if (mutex_trylock(&oom_lock)) {
      while (atomic_read(&printk_pending_logs) > 0) {
        atomic_dec(&printk_pending_logs);
        print_one_log();
      }
      // Send SIGKILL here.
      mutex_unlock(&oom_lock)
    }
    goto retry;

After warn_alloc() was introduced:

  retry:
    if (mutex_trylock(&oom_lock)) {
      while (atomic_read(&printk_pending_logs) > 0) {
        atomic_dec(&printk_pending_logs);
        print_one_log();
      }
      // Send SIGKILL here.
      mutex_unlock(&oom_lock)
    } else if (waited_for_10seconds()) {
      atomic_inc(&printk_pending_logs);
    }
    goto retry;
---------- Pseudo code end ----------

Although waited_for_10seconds() becomes true once per 10 seconds,
unbounded number of threads can call waited_for_10seconds() at the same
time.  Also, since threads doing waited_for_10seconds() keep doing
almost busy loop, the thread doing print_one_log() can use little CPU
resource.  Therefore, this situation can be simplified like

---------- Pseudo code start ----------
  retry:
    if (mutex_trylock(&oom_lock)) {
      while (atomic_read(&printk_pending_logs) > 0) {
        atomic_dec(&printk_pending_logs);
        print_one_log();
      }
      // Send SIGKILL here.
      mutex_unlock(&oom_lock)
    } else {
      atomic_inc(&printk_pending_logs);
    }
    goto retry;
---------- Pseudo code end ----------

when printk() is called faster than print_one_log() can process a log.

One of possible mitigation would be to introduce a new lock in order to
make sure that no other series of printk() (either oom_kill_process() or
warn_alloc()) can append to printk() buffer when one series of printk()
(either oom_kill_process() or warn_alloc()) is already in progress.

Such serialization will also help obtaining kernel messages in readable
form.

---------- Pseudo code start ----------
  retry:
    if (mutex_trylock(&oom_lock)) {
      mutex_lock(&oom_printk_lock);
      while (atomic_read(&printk_pending_logs) > 0) {
        atomic_dec(&printk_pending_logs);
        print_one_log();
      }
      // Send SIGKILL here.
      mutex_unlock(&oom_printk_lock);
      mutex_unlock(&oom_lock)
    } else {
      if (mutex_trylock(&oom_printk_lock)) {
        atomic_inc(&printk_pending_logs);
        mutex_unlock(&oom_printk_lock);
      }
    }
    goto retry;
---------- Pseudo code end ----------

But this commit does not go that direction, for we don't want to
introduce a new lock dependency, and we unlikely be able to obtain
useful information even if we serialized oom_kill_process() and
warn_alloc().

Synchronous approach is prone to unexpected results (e.g.  too late [1],
too frequent [2], overlooked [3]).  As far as I know, warn_alloc() never
helped with providing information other than "something is going wrong".
I want to consider asynchronous approach which can obtain information
during stalls with possibly relevant threads (e.g.  the owner of
oom_lock and kswapd-like threads) and serve as a trigger for actions
(e.g.  turn on/off tracepoints, ask libvirt daemon to take a memory dump
of stalling KVM guest for diagnostic purpose).

This commit temporarily loses ability to report e.g.  OOM lockup due to
unable to invoke the OOM killer due to !__GFP_FS allocation request.
But asynchronous approach will be able to detect such situation and emit
warning.  Thus, let's remove warn_alloc().

[1] https://bugzilla.kernel.org/show_bug.cgi?id=192981
[2] http://lkml.kernel.org/r/CAM_iQpWuPVGc2ky8M-9yukECtS+zKjiDasNymX7rMcBjBFyM_A@mail.gmail.com
[3] commit db73ee0d46379922 ("mm, vmscan: do not loop on too_many_isolated for ever"))

Link: http://lkml.kernel.org/r/1509017339-4802-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: yuwang.yuwang <yuwang.yuwang@alibaba-inc.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd: add missing of_node_put()

[ Upstream commit c44c749d3b6fdfca39002e7e48e03fe9f9fe37a3 ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place doesn't do that, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

team: no need to do team_notify_peers or team_mcast_rejoin when disabling port

[ Upstream commit 5ed9dc99107144f83b6c1bb52a69b58875baf540 ]

team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin()
will send multicast join group message to notify peers. We should do this when
enabling/changed to a new port. But it doesn't make sense to do it when a port
is disabled.

On the other hand, when we set mcast_rejoin_count to 2, and do a failover,
team_port_disable() will increase mcast_rejoin.count_pending to 2 and then
team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send
4 mcast rejoin messages at latest, which will make user confused. The same
with notify_peers.count.

Fix it by deleting team_notify_peers() and team_mcast_rejoin() in
team_port_disable().

Reported-by: Liang Li <liali@redhat.com>
Fixes: fc423ff00df3a ("team: add peer notification")
Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: Fix RX queue buffer cleanup

[ Upstream commit b7cdec3d699db2e5985ad39de0f25d3b6111928e ]

The wrong index is used when cleaning up RX buffer objects during release
of RX queues. Update to use the correct index counter.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

flexfiles: use per-mirror specified stateid for IO

[ Upstream commit bb21ce0ad227b69ec0f83279297ee44232105d96 ]

rfc8435 says:

  For tight coupling, ffds_stateid provides the stateid to be used by
  the client to access the file.

However current implementation replaces per-mirror provided stateid with
by open or lock stateid.

Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and
nfs4_ff_layout_prepare_ds.

Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Use memunmap to free memremap

[ Upstream commit 829383e183728dec7ed9150b949cd6de64127809 ]

memunmap() should be used to free the return of memremap(), not
iounmap().

Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap')
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts

[ Upstream commit 426a593e641ebf0d9288f0a2fcab644a86820220 ]

In the original ftmac100_interrupt(), the interrupts are only disabled when
the condition "netif_running(netdev)" is true. However, this condition
causes kerenl hang in the following case. When the user requests to
disable the network device, kernel will clear the bit __LINK_STATE_START
from the dev->state and then call the driver's ndo_stop function. Network
device interrupts are not blocked during this process. If an interrupt
occurs between clearing __LINK_STATE_START and stopping network device,
kernel cannot disable the interrupts due to the condition
"netif_running(netdev)" in the ISR. Hence, kernel will hang due to the
continuous interruption of the network device.

In order to solve the above problem, the interrupts of the network device
should always be disabled in the ISR without being restricted by the
condition "netif_running(netdev)".

[V2]
Remove unnecessary curly braces.

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix QM getters to always return a valid pq

[ Upstream commit eb62cca9bee842e5b23bd0ddfb1f271ca95e8759 ]

The getter callers doesn't know the valid Physical Queues (PQ) values.
This patch makes sure that a valid PQ will always be returned.

The patch consists of 3 fixes:

 - When qed_init_qm_get_idx_from_flags() receives a disabled flag, it
   returned PQ 0, which can potentially be another function's pq. Verify
   that flag is enabled, otherwise return default start_pq.

 - When qed_init_qm_get_idx_from_flags() receives an unknown flag, it
   returned NULL and could lead to a segmentation fault. Return default
   start_pq instead.

 - A modulo operation was added to MCOS/VFS PQ getters to make sure the
   PQ returned is in range of the required flag.

Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix bitmap_weight() check

[ Upstream commit 276d43f0ae963312c0cd0e2b9a85fd11ac65dfcc ]

Fix the condition which verifies that only one flag is set. The API
bitmap_weight() should receive size in bits instead of bytes.

Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: Fix Cadence QSPI page fault kernel panic

[ Upstream commit a6a66f80c85e8e20573ca03fabf32445954a88d5 ]

The current Cadence QSPI driver caused a kernel panic sporadically
when writing to QSPI. The problem was caused by writing more bytes
than needed because the QSPI operated on 4 bytes at a time.
<snip>
[   11.202044] Unable to handle kernel paging request at virtual address bffd3000
[   11.209254] pgd = e463054d
[   11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000
[   11.218202] Internal error: Oops: 7 [#1] SMP ARM
[   11.222797] Modules linked in:
[   11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f
[   11.235796] Hardware name: Altera SOCFPGA Arria10
[   11.240487] PC is at __raw_writesl+0x70/0xd4
[   11.244741] LR is at cqspi_write+0x1a0/0x2cc
</snip>
On a page boundary limit the number of bytes copied from the tx buffer
to remain within the page.

This patch uses a temporary buffer to hold the 4 bytes to write and then
copies only the bytes required from the tx buffer.

Reported-by: Adrian Amborzewicz <adrian.ambrozewicz@intel.com>
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: Add pointstick support for Cirque Touchpad

[ Upstream commit 12d43aacf9a74d0eb66fd0ea54ebeb79ca28940f ]

Cirque Touchpad/Pointstick combo is similar to Alps devices, it requires
MT_CLS_WIN_8_DUAL to expose its pointstick as a mouse.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: qcom: Namespace prefix some commands

[ Upstream commit 33bf5519ae5dd356b182a94e3622f42860274a38 ]

PAGE_READ is used by RISC-V arch code included through mm headers,
and it makes sense to bring in a prefix on these in the driver.

drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined
 #define PAGE_READ   0x2
In file included from include/linux/memremap.h:7,
                 from include/linux/mm.h:27,
                 from include/linux/scatterlist.h:8,
                 from include/linux/dma-mapping.h:11,
                 from drivers/mtd/nand/raw/qcom_nandc.c:17:
arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition

Caught by riscv allmodconfig.

Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mockup: fix indicated direction

[ Upstream commit bff466bac59994cfcceabe4d0be5fdc1c20cd5b8 ]

Commit 3edfb7bd76bd ("gpiolib: Show correct direction from the
beginning") fixed an existing issue but broke libgpiod tests by
changing the default direction of dummy lines to output.

We don't break user-space so make gpio-mockup behave as before.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4: Fix UBSAN warning of signed integer overflow

[ Upstream commit a463146e67c848cbab5ce706d6528281b7cded08 ]

UBSAN: Undefined behavior in
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29
signed integer overflow: 1802201963 + 1802201963 cannot be represented
in type 'int'

The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors
granting of reserved resources. The grant operation is calculated and
protected, thus both members of the union cannot be negative.  Changed
type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed
int to unsigned int, allowing large value.

Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4_core: Fix uninitialized variable compilation warning

[ Upstream commit 3ea7e7ea53c9f6ee41cb69a29c375fe9dd9a56a7 ]

Initialize the uid variable to zero to avoid the compilation warning.

Fixes: 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4_core: Zero out lkey field in SW2HW_MPT fw command

[ Upstream commit bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c ]

When re-registering a user mr, the mpt information for the
existing mr when running SRIOV is obtained via the QUERY_MPT
fw command. The returned information includes the mpt's lkey.

This retrieved mpt information is used to move the mpt back
to hardware ownership in the rereg flow (via the SW2HW_MPT
fw command when running SRIOV).

The fw API spec states that for SW2HW_MPT, the lkey field
must be zero. Any ConnectX-3 PF driver which checks for strict spec
adherence will return failure for SW2HW_MPT if the lkey field is not
zero (although the fw in practice ignores this field for SW2HW_MPT).

Thus, in order to conform to the fw API spec, set the lkey field to zero
before invoking SW2HW_MPT when running SRIOV.

Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"

[ Upstream commit a9c859033f6ec772f8e3228c343bb1321584ae0e ]

This reverts commit b4194da3f9087dd38d91b40f9bec42d59ce589a8
since it causes list corruption followed by kernel panic:

Workqueue: adb ffs_aio_cancel_worker
RIP: 0010:__list_add_valid+0x4d/0x70
Call Trace:
insert_work+0x47/0xb0
__queue_work+0xf6/0x400
queue_work_on+0x65/0x70
dwc3_gadget_giveback+0x44/0x50 [dwc3]
dwc3_gadget_ep_dequeue+0x83/0x2d0 [dwc3]
? finish_wait+0x80/0x80
usb_ep_dequeue+0x1e/0x90
process_one_work+0x18c/0x3b0
worker_thread+0x3c/0x390
? process_one_work+0x3b0/0x3b0
kthread+0x11e/0x140
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x3a/0x50

This issue is seen with warm reboot stability testing.

Signed-off-by: Shen Jing <jingx.shen@intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix reading wrong value in loop condition

[ Upstream commit ed4eac20dcffdad47709422e0cb925981b056668 ]

The value of "sb_index" is written by the hardware. Reading its value and
writing it to "index" must finish before checking the loop condition.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix PTT leak in qed_drain()

[ Upstream commit 9aaa4e8ba12972d674caeefbc5f88d83235dd697 ]

Release PTT before entering error flow.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnx2x: Assign unique DMAE channel number for FW DMAE transactions.

[ Upstream commit 77e461d14ed141253573eeeb4d34eccc51e38328 ]

Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW
uses this channel for DMAE operations (e.g., TIME_SYNC implementation).
Driver also uses the same channel 0 for DMAE operations for some of the PFs
(e.g., PF0 on Port0). This could lead to concurrent access to the DMAE
channel by FW and driver which is not legal. Hence need to assign unique
DMAE id for FW.
Currently following DMAE channels are used by the clients,
  MFW - OCBB/OCSD functionality uses DMAE channel 14/15
  Driver 0-3 and 8-11 (for PF dmae operations)
         4 and 12 (for stats requests)
Assigning unique dmae_id '13' to the FW.

Changes from previous version:
------------------------------
v2: Incorporated the review comments.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd/iommu: Fix Guest Virtual APIC Log Tail Address Register

[ Upstream commit ab99be4683d9db33b100497d463274ebd23bd67e ]

This register should have been programmed with the physical address
of the memory location containing the shadow tail pointer for
the guest virtual APIC log instead of the base address.

Fixes: 8bda0cfbdc1a  ('iommu/amd: Detect and initialize guest vAPIC log')
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: Expand merged fragment buffer for full packet

[ Upstream commit d7d8bbb40a5b1f682ee6589e212934f4c6b8ad60 ]

The complete size ("total_size") of the fragmented packet is stored in the
fragment header and in the size of the fragment chain. When the fragments
are ready for merge, the skbuff's tail of the first fragment is expanded to
have enough room after the data pointer for at least total_size. This means
that it gets expanded by total_size - first_skb->len.

But this is ignoring the fact that after expanding the buffer, the fragment
header is pulled by from this buffer. Assuming that the tailroom of the
buffer was already 0, the buffer after the data pointer of the skbuff is
now only total_size - len(fragment_header) large. When the merge function
is then processing the remaining fragments, the code to copy the data over
to the merged skbuff will cause an skb_over_panic when it tries to actually
put enough data to fill the total_size bytes of the packet.

The size of the skb_pull must therefore also be taken into account when the
buffer's tailroom is expanded.

Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Co-authored-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: Use explicit tvlv padding for ELP packets

[ Upstream commit f4156f9656feac21f4de712fac94fae964c5d402 ]

The announcement messages of batman-adv COMPAT_VERSION 15 have the
possibility to announce additional information via a dynamic TVLV part.
This part is optional for the ELP packets and currently not parsed by the
Linux implementation. Still out-of-tree versions are using it to transport
things like neighbor hashes to optimize the rebroadcast behavior.

Since the ELP broadcast packets are smaller than the minimal ethernet
packet, it often has to be padded. This is often done (as specified in
RFC894) with octets of zero and thus work perfectly fine with the TVLV
part (making it a zero length and thus empty). But not all ethernet
compatible hardware seems to follow this advice. To avoid ambiguous
situations when parsing the TVLV header, just force the 4 bytes (TVLV
length + padding) after the required ELP header to zero.

Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: input: Ignore battery reported by Symbol DS4308

[ Upstream commit 0fd791841a6d67af1155a9c3de54dea51220721e ]

The Motorola/Zebra Symbol DS4308-HD is a handheld USB barcode scanner
which does not have a battery, but reports one anyway that always has
capacity 2.

Let's apply the IGNORE quirk to prevent it from being treated like a
power supply so that userspaces don't get confused that this
accessory is almost out of power and warn the user that they need to charge
their wired barcode scanner.

Reported here: https://bugs.chromium.org/p/chromium/issues/detail?id=804720

Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

test_firmware: fix error return getting clobbered

[ Upstream commit 8bb0a88600f0267cfcc245d34f8c4abe8c282713 ]

In the case where eq->fw->size > PAGE_SIZE the error return rc
is being set to EINVAL however this is being overwritten to
rc = req->fw->size because the error exit path via label 'out' is
not being taken.  Fix this by adding the jump to the error exit
path 'out'.

Detected by CoverityScan, CID#1453465 ("Unused value")

Fixes: c92316bf8e94 ("test_firmware: add batched firmware tests")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: rcar_can: Fix erroneous registration

[ Upstream commit 68c8d209cd4337da4fa04c672f0b62bb735969bc ]

Assigning 2 to "renesas,can-clock-select" tricks the driver into
registering the CAN interface, even though we don't want that.
This patch improves one of the checks to prevent that from happening.

Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/ipmmu-vmsa: Fix crash on early domain free

[ Upstream commit e5b78f2e349eef5d4fca5dc1cf5a3b4b2cc27abd ]

If iommu_ops.add_device() fails, iommu_ops.domain_free() is still
called, leading to a crash, as the domain was only partially
initialized:

    ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables
    sata_rcar ee300000.sata: Unable to initialize IPMMU context
    iommu: Failed to add device ee300000.sata to group 0: -22
    Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
    ...
    Call trace:
     ipmmu_domain_free+0x1c/0xa0
     iommu_group_release+0x48/0x68
     kobject_put+0x74/0xe8
     kobject_del.part.0+0x3c/0x50
     kobject_put+0x60/0xe8
     iommu_group_get_for_dev+0xa8/0x1f0
     ipmmu_add_device+0x1c/0x40
     of_iommu_configure+0x118/0x190

Fix this by checking if the domain's context already exists, before
trying to destroy it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: d25a2a16f0889 ('iommu: Add driver for Renesas VMSA-compatible IPMMU')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmutil: really fix decoding channel info for 160 MHz bandwidth

[ Upstream commit 3401d42c7ea2d064d15c66698ff8eb96553179ce ]

Previous commit /adding/ support for 160 MHz chanspecs was incomplete.
It didn't set bandwidth info and didn't extract control channel info. As
the result it was also using uninitialized "sb" var.

This change has been tested for two chanspecs found to be reported by
some devices/firmwares:
1) 60/160 (0xee32)
   Before: chnum:50 control_ch_num:36
    After: chnum:50 control_ch_num:60
2) 120/160 (0xed72)
   Before: chnum:114 control_ch_num:100
    After: chnum:114 control_ch_num:120

Fixes: 330994e8e8ec ("brcmfmac: fix for proper support of 160MHz bandwidth")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()

[ Upstream commit 19ed3e2dd8549c1a34914e8dad01b64e7837645a ]

When handling page request without pasid event, go to "no_pasid"
branch instead of "bad_req". Otherwise, a NULL pointer deference
will happen there.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: a222a7f0bb6c9 'iommu/vt-d: Implement page request handling'
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: omap3isp: Unregister media device as first

[ Upstream commit 30efae3d789cd0714ef795545a46749236e29558 ]

While there are issues related to object lifetime management, unregister the
media device first when the driver is being unbound. This is slightly
safer.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.14.87

tipc: use destination length for copy string

commit 29e270fc32192e7729057963ae7120663856c93e upstream.

Got below warning with gcc 8.2 compiler.

net/tipc/topsrv.c: In function ‘tipc_topsrv_start’:
net/tipc/topsrv.c:660:2: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
  strncpy(srv->name, name, strlen(name) + 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/topsrv.c:660:27: note: length computed here
  strncpy(srv->name, name, strlen(name) + 1);
                           ^~~~~~~~~~~~
So change it to correct length and use strscpy.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qed: use correct strncpy() size

commit 11f711081af0eb54190dc0de96ba4a9cd494666b upstream.

passing the strlen() of the source string as the destination
length is pointless, and gcc-8 now warns about it:

drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump':
include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]

This changes qed_grc_dump_big_ram() to instead uses the length of
the destination buffer, and use strscpy() to guarantee nul-termination.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hide incomplete nr_indirectly_reclaimable in /proc/zoneinfo

[fixed differently upstream, this is a work-around to resolve it for 4.14.y]

Yongqin reported that /proc/zoneinfo format is broken in 4.14
due to commit 7aaf77272358 ("mm: don't show nr_indirectly_reclaimable
in /proc/vmstat")

Node 0, zone      DMA
  per-node stats
      nr_inactive_anon 403
      nr_active_anon 89123
      nr_inactive_file 128887
      nr_active_file 47377
      nr_unevictable 2053
      nr_slab_reclaimable 7510
      nr_slab_unreclaimable 10775
      nr_isolated_anon 0
      nr_isolated_file 0
      <...>
      nr_vmscan_write 0
      nr_vmscan_immediate_reclaim 0
      nr_dirtied   6022
      nr_written   5985
                   74240
      ^^^^^^^^^^
  pages free     131656

The problem is caused by the nr_indirectly_reclaimable counter,
which is hidden from the /proc/vmstat, but not from the
/proc/zoneinfo. Let's fix this inconsistency and hide the
counter from /proc/zoneinfo exactly as from /proc/vmstat.

BTW, in 4.19+ the counter has been renamed and exported by
the commit b29940c1abd7 ("mm: rename and change semantics of
nr_indirectly_reclaimable_bytes"), so there is no such a problem
anymore.

Cc: <stable@vger.kernel.org> # 4.14.x-4.18.x
Fixes: 7aaf77272358 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/hisi: Remove costly sensor inspection

commit 10d7e9a9181f4637640f388d334c6740c1b5d0e8 upstream.

The sensor is all setup, bind, resetted, acked, etc... every single second.

That was the way to workaround a problem with the interrupt bouncing again and
again.

With the following changes, we fix all in one:

 - Do the setup, one time, at probe time

 - Add the IRQF_ONESHOT, ack the interrupt in the threaded handler

 - Remove the interrupt handler

 - Set the correct value for the LAG register

 - Remove all the irq_enabled stuff in the code as the interruption
   handling is fixed

 - Remove the 3ms delay

 - Reorder the initialization routine to be in the right order

It ends up to a nicer code and more efficient, the 3-5ms delay is removed from
the get_temp() path.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/hisi: Fix configuration register setting

commit b424315a287c70eeb5f920f84c92492bd2f5658e upstream.

The TEMP0_CFG configuration register contains different field to set up the
temperature controller. However in the code, nothing prevents a setup to
overwrite the previous one: eg. writing the hdak value overwrites the sensor
selection, the sensor selection overwrites the hdak value.

In order to prevent such thing, use a regmap-like mechanism by reading the
value before, set the corresponding bits and write the result.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/hisi: Encapsulate register writes into helpers

commit 1e11b014271ceccb5ea04ae58f4829ac8209a86d upstream.

Hopefully, the function name can help to clarify the semantic of the operations
when writing in the register.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/hisi: Remove pointless lock

commit 2d4fa7b4c6f8080ced2e8237c9f46fb1fc110d64 upstream.

The threaded interrupt inspect the sensors structure to look in the temp
threshold field, but this field is read-only in all the code, except in the
probe function before the threaded interrupt is set. In other words there
is not race window in the threaded interrupt when reading the field value.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/hisi: Remove the multiple sensors support

commit ff4ec2997df8fe7cc40513dbe5f86d9f88fb6be7 upstream.

By essence, the tsensor does not really support multiple sensor at the same
time. It allows to set a sensor and use it to get the temperature, another
sensor could be switched but with a delay of 3-5ms. It is difficult to read
simultaneously several sensors without a big delay.

Today, just one sensor is used, it is not necessary to deal with multiple
sensors in the code. Remove them and if it is needed in the future add them
on top of a code which will be clean up in the meantime.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Wangtao (Kevin, Kirin) <kevin.wangtao@hisilicon.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: cleancache: fix corruption on missed inode invalidation

commit 6ff38bd40230af35e446239396e5fc8ebd6a5248 upstream.

If all pages are deleted from the mapping by memory reclaim and also
moved to the cleancache:

__delete_from_page_cache
  (no shadow case)
  unaccount_page_cache_page
    cleancache_put_page
  page_cache_delete
    mapping->nrpages -= nr
    (nrpages becomes 0)

We don't clean the cleancache for an inode after final file truncation
(removal).

truncate_inode_pages_final
  check (nrpages || nrexceptional) is false
    no truncate_inode_pages
      no cleancache_invalidate_inode(mapping)

These way when reading the new file created with same inode we may get
these trash leftover pages from cleancache and see wrong data instead of
the contents of the new file.

Fix it by always doing truncate_inode_pages which is already ready for
nrpages == 0 && nrexceptional == 0 case and just invalidates inode.

[akpm@linux-foundation.org: add comment, per Jan]
Link: http://lkml.kernel.org/r/20181112095734.17979-1-ptikhomirov@virtuozzo.com
Fixes: commit 91b0abe36a7b ("mm + fs: store shadow entries in page cache")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reset: remove remaining WARN_ON() in <linux/reset.h>

commit bb6c7768385b200063a14d6615cc1246c3d00760 upstream.

Commit bb475230b8e5 ("reset: make optional functions really optional")
gave a new meaning to _get_optional variants.

The differentiation by WARN_ON() is not needed any more.  We already
have inconsistency about this; (devm_)reset_control_get_exclusive()
has WARN_ON() check, but of_reset_control_get_exclusive() does not.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reset: make device_reset_optional() really optional

commit 1554bbd4ad401b7f0f916c0891874111c10befe5 upstream.

Commit bb475230b8e5 ("reset: make optional functions really optional")
converted *_get_optional* functions, but device_reset_optional() was
left behind.  Convert it in the same way.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Allow mounting volumes with incorrect identification strings

commit b54e41f5efcb4316b2f30b30c2535cc194270373 upstream.

Commit c26f6c615788 ("udf: Fix conversion of 'dstring' fields to UTF8")
started to be more strict when checking whether converted strings are
properly formatted. Sudip reports that there are DVDs where the volume
identification string is actually too long - UDF reports:

[  632.309320] UDF-fs: incorrect dstring lengths (32/32)

during mount and fails the mount. This is mostly harmless failure as we
don't need volume identification (and even less volume set
identification) for anything. So just truncate the volume identification
string if it is too long and replace it with 'Invalid' if we just cannot
convert it for other reasons. This keeps slightly incorrect media still
mountable.

CC: stable@vger.kernel.org
Fixes: c26f6c615788 ("udf: Fix conversion of 'dstring' fields to UTF8")
Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: [devboards] Add support of NFSv3 ACL

commit 6b04114f6fae5e84d33404c2970b1949c032546e upstream.

By default NFSv3 doesn't support ACL (Access Control Lists)
which might be quite convenient to have so that
mounted NFS behaves exactly as any other local file-system.

In particular missing support of ACL makes umask useless.
This among other thigs fixes Glibc's "nptl/tst-umask1".

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: stable@vger.kernel.org #4.14+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: change defconfig defaults to ARCv2

commit b7cc40c32a8bfa6f2581a71747f6a7d491fe43ba upstream.

Change the default defconfig (used with 'make defconfig') to the ARCv2
nsim_hs_defconfig, and also switch the default Kconfig ISA selection to
ARCv2.

This allows several default defconfigs (e.g. make defconfig, make
allnoconfig, make tinyconfig) to all work with ARCv2 by default.

Note since we change default architecture from ARCompact to ARCv2
it's required to explicitly mention architecture type in ARCompact
defconfigs otherwise ARCv2 will be implied and binaries will be
generated for ARCv2.

Cc: <stable@vger.kernel.org> # 4.4.x
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Always try all copies when reading extent buffers

commit f8397d69daef06d358430d3054662fb597e37c00 upstream.

When a metadata read is served the endio routine btree_readpage_end_io_hook
is called which eventually runs the tree-checker. If tree-checker fails
to validate the read eb then it sets EXTENT_BUFFER_CORRUPT flag. This
leads to btree_read_extent_buffer_pages wrongly assuming that all
available copies of this extent buffer are wrong and failing prematurely.
Fix this modify btree_read_extent_buffer_pages to read all copies of
the data.

This failure was exhibitted in xfstests btrfs/124 which would
spuriously fail its balance operations. The reason was that when balance
was run following re-introduction of the missing raid1 disk
__btrfs_map_block would map the read request to stripe 0, which
corresponded to devid 2 (the disk which is being removed in the test):

    item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 3553624064) itemoff 15975 itemsize 112
length 1073741824 owner 2 stripe_len 65536 type DATA|RAID1
io_align 65536 io_width 65536 sector_size 4096
num_stripes 2 sub_stripes 1
stripe 0 devid 2 offset 2156920832
dev_uuid 8466c350-ed0c-4c3b-b17d-6379b445d5c8
stripe 1 devid 1 offset 3553624064
dev_uuid 1265d8db-5596-477e-af03-df08eb38d2ca

This caused read requests for a checksum item that to be routed to the
stale disk which triggered the aforementioned logic involving
EXTENT_BUFFER_CORRUPT flag. This then triggered cascading failures of
the balance operation.

Fixes: a826d6dcb32d ("Btrfs: check items for correctness as we search")
CC: stable@vger.kernel.org # 4.4+
Suggested-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: tree-checker: Don't check max block group size as current max chunk size limit is unreliable

commit 10950929e994c5ecee149ff0873388d3c98f12b5 upstream.

[BUG]
A completely valid btrfs will refuse to mount, with error message like:
  BTRFS critical (device sdb2): corrupt leaf: root=2 block=239681536 slot=172 \
    bg_start=12018974720 bg_len=10888413184, invalid block group size, \
    have 10888413184 expect (0, 10737418240]

This has been reported several times as the 4.19 kernel is now being
used. The filesystem refuses to mount, but is otherwise ok and booting
4.18 is a workaround.

Btrfs check returns no error, and all kernels used on this fs is later
than 2011, which should all have the 10G size limit commit.

[CAUSE]
For a 12 devices btrfs, we could allocate a chunk larger than 10G due to
stripe stripe bump up.

__btrfs_alloc_chunk()
|- max_stripe_size = 1G
|- max_chunk_size = 10G
|- data_stripe = 11
|- if (1G * 11 > 10G) {
       stripe_size = 976128930;
       stripe_size = round_up(976128930, SZ_16M) = 989855744

However the final stripe_size (989855744) * 11 = 10888413184, which is
still larger than 10G.

[FIX]
For the comprehensive check, we need to do the full check at chunk read
time, and rely on bg <-> chunk mapping to do the check.

We could just skip the length check for now.

Fixes: fce466eab7ac ("btrfs: tree-checker: Verify block_group_item")
Cc: stable@vger.kernel.org # v4.19+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add support for ELAN0621 touchpad

commit bf87ade0dd7f8cf19dac4d3161d5e86abe0c062b upstream.

Added the ability to detect the ELAN0621 touchpad found in some Lenovo
laptops.

Signed-off-by: Adam Wong <adam@adamwong.me>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR

commit ad33429cd02565c28404bb16ae7a4c2bdfda6626 upstream.

Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15ARR.

Signed-off-by: Noah Westervelt <nwestervelt@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ELAN0620 to the ACPI table

commit 3ed64da3b790be7c63601e8ca6341b7dff74a660 upstream.

Add ELAN0620 to the ACPI table to support the elan touchpad in
the Lenovo IdeaPad 130-15IKB.

Signed-off-by: Patrick Gaskin <patrick@pgaskin.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: cros_ec_keyb - fix button/switch capability reports

commit ac5722c1643a2fb75224c79b578214956d34f989 upstream.

The cros_ec_keyb_bs array lists buttons and switches together, expecting
that its users will match the appropriate type and bit fields. But
cros_ec_keyb_register_bs() only checks the 'bit' field, which causes
misreported input capabilities in some cases. For example, tablets
(e.g., Scarlet -- a.k.a. Acer Chromebook Tab 10) were reporting a SW_LID
capability, because EC_MKBP_POWER_BUTTON and EC_MKBP_LID_OPEN happen to
share the same bit.

(This has comedic effect on a tablet, in which a power-management daemon
then thinks this "lid" is closed, and so puts the system to sleep as
soon as it boots!)

To fix this, check both the 'ev_type' and 'bit' fields before reporting
the capability.

Tested with a lid (Kevin / Samsung Chromebook Plus) and without a lid
(Scarlet / Acer Chromebook Tab 10).

This error got introduced when porting the feature from the downstream
Chromium OS kernel to be upstreamed.

Fixes: cdd7950e7aa4 ("input: cros_ec_keyb: Add non-matrix buttons and switches")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: matrix_keypad - check for errors from of_get_named_gpio()

commit d55bda1b3e7c5a87f10da54fdda866a9a9cef30b upstream.

"of_get_named_gpio()" returns a negative error value if it fails
and drivers should check for this. This missing check was now
added to the matrix_keypad driver.

In my case "of_get_named_gpio()" returned -EPROBE_DEFER because
the referenced GPIOs belong to an I/O expander, which was not yet
probed at the point in time when the matrix_keypad driver was
loading. Because the driver did not check for errors from the
"of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER"
is actually a GPIO number and continued as usual, which led to further
errors like this later on:

WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114
gpio_to_desc+0xc8/0xd0
invalid GPIO -517

Note that the "GPIO number" -517 in the error message above is
actually "-EPROBE_DEFER".

As part of the patch a misleading error message "no platform data defined"
was also removed. This does not lead to information loss because the other
error paths in matrix_keypad_parse_dt() already print an error.

Signed-off-by: Christian Hoff <christian_hoff@gmx.net>
Suggested-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - add PNP ID for ThinkPad P50 to SMBus

commit 9df39bedbf292680655c6a947c77d6562c693d4a upstream.

Noticed the other day the trackpoint felt different on my P50, then
realized it was because rmi4 wasn't loading for this machine
automatically. Suspend/resume, hibernate, and everything else seem to
work perfectly fine on here.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - quirk all PDP Xbox One gamepads

commit a6754fae1e66e9a40fed406290d7ca3f2b4d227c upstream.

Since we continue to find tons of new variants [0,1,2,3,4,5,6] that
need the PDP quirk, let's just quirk all devices from PDP.

[0]: https://github.com/paroj/xpad/pull/104
[1]: https://github.com/paroj/xpad/pull/105
[2]: https://github.com/paroj/xpad/pull/108
[3]: https://github.com/paroj/xpad/pull/109
[4]: https://github.com/paroj/xpad/pull/112
[5]: https://github.com/paroj/xpad/pull/115
[6]: https://github.com/paroj/xpad/pull/116

Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: fix OF child-node lookup

commit f9a7082327e26f54067a49cac2316d31e0cc8ba7 upstream.

Use the new of_get_compatible_child() helper to lookup the legacy
pwrlevels child node instead of using of_find_compatible_node(), which
searches the entire tree from a given start node and thus can return an
unrelated (i.e.  non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the probed device's node).

While at it, also fix the related child-node reference leak.

Fixes: e2af8b6b0ca1 ("drm/msm: gpu: Use OPP tables if we can")
Cc: stable <stable@vger.kernel.org> # 4.12
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
[ johan: backport to 4.14 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

svm: Add mutex_lock to protect apic_access_page_done on AMD systems

commit 30510387a5e45bfcf8190e03ec7aa15b295828e2 upstream.

There is a race condition when accessing kvm->arch.apic_access_page_done.
Due to it, x86_set_memory_region will fail when creating the second vcpu
for a svm guest.

Add a mutex_lock to serialize the accesses to apic_access_page_done.
This lock is also used by vmx for the same purpose.

Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Amadeusz Juskowiak <ajusk@amazon.de>
Signed-off-by: Julian Stecklina <jsteckli@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kgdboc: Fix warning with module build

commit 1cd25cbb2fedbc777f3a8c3cb1ba69b645aeaa64 upstream.

After 2dd453168643 ("kgdboc: Fix restrict error"), kgdboc_option_setup is
now only used when built in, resulting in a warning when compiled as a
module:

drivers/tty/serial/kgdboc.c:134:12: warning: 'kgdboc_option_setup' defined but not used [-Wunused-function]
 static int kgdboc_option_setup(char *opt)
            ^~~~~~~~~~~~~~~~~~~

Move the function under the appropriate ifdef for builtin only.

Fixes: 2dd453168643 ("kgdboc: Fix restrict error")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kgdboc: Fix restrict error

commit 2dd453168643d9475028cd867c57e65956a0f7f9 upstream.

There's an error when compiled with restrict:

drivers/tty/serial/kgdboc.c: In function ‘configure_kgdboc’:
drivers/tty/serial/kgdboc.c:137:2: error: ‘strcpy’ source argument is the same
as destination [-Werror=restrict]
  strcpy(config, opt);
  ^~~~~~~~~~~~~~~~~~~

As the error implies, this is from trying to use config as both source and
destination. Drop the call to the function where config is the argument
since nothing else happens in the function.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: trident: Suppress gcc string warning

commit d6b340d7cb33c816ef4abe8143764ec5ab14a5cc upstream.

The meddlesome gcc warns about the possible shortname string in
trident driver code:
  sound/pci/trident/trident.c: In function ‘snd_trident_probe’:
  sound/pci/trident/trident.c:126:2: warning: ‘strcat’ accessing 17 or more bytes at offsets 36 and 20 may overlap 1 byte at offset 36 [-Wrestrict]
  strcat(card->shortname, card->driver);

It happens since gcc calculates the possible string size from
card->driver, but this can't be true since we did set the string just
before that, and they are much shorter.

For shutting it up, use the exactly same string set to card->driver
for strcat() to card->shortname, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas

commit 29ec90660d68bbdd69507c1c8b4e33aa299278b1 upstream.

After the VMA to register the uffd onto is found, check that it has
VM_MAYWRITE set before allowing registration.  This way we inherit all
common code checks before allowing to fill file holes in shmem and
hugetlbfs with UFFDIO_COPY.

The userfaultfd memory model is not applicable for readonly files unless
it's a MAP_PRIVATE.

Link: http://lkml.kernel.org/r/20181126173452.26955-4-aarcange@redhat.com
Fixes: ff62a3421044 ("hugetlb: implement memfd sealing")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Reported-by: Jann Horn <jannh@google.com>
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_devinfo: cleanly zero-pad devinfo strings

commit 81df022b688d43d2a3667518b2f755d384397910 upstream.

Cleanly fill memory for "vendor" and "model" with 0-bytes for the
"compatible" case rather than adding only a single 0 byte.  This
simplifies the devinfo code a a bit, and avoids mistakes in other places
of the code (not in current upstream, but we had one such mistake in the
SUSE kernel).

[mkp: applied by hand and added braces]

Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set

commit dcf7fe9d89763a28e0f43975b422ff141fe79e43 upstream.

Set the page dirty if VM_WRITE is not set because in such case the pte
won't be marked dirty and the page would be reclaimed without writepage
(i.e.  swapout in the shmem case).

This was found by source review.  Most apps (certainly including QEMU)
only use UFFDIO_COPY on PROT_READ|PROT_WRITE mappings or the app can't
modify the memory in the first place.  This is for correctness and it
could help the non cooperative use case to avoid unexpected data loss.

Link: http://lkml.kernel.org/r/20181126173452.26955-6-aarcange@redhat.com
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: shmem: add i_size checks

commit e2a50c1f64145a04959df2442305d57307e5395a upstream.

With MAP_SHARED: recheck the i_size after taking the PT lock, to
serialize against truncate with the PT lock.  Delete the page from the
pagecache if the i_size_read check fails.

With MAP_PRIVATE: check the i_size after the PT lock before mapping
anonymous memory or zeropages into the MAP_PRIVATE shmem mapping.

A mostly irrelevant cleanup: like we do the delete_from_page_cache()
pagecache removal after dropping the PT lock, the PT lock is a spinlock
so drop it before the sleepable page lock.

Link: http://lkml.kernel.org/r/20181126173452.26955-5-aarcange@redhat.com
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem

commit 5b51072e97d587186c2f5390c8c9c1fb7e179505 upstream.

Userfaultfd did not create private memory when UFFDIO_COPY was invoked
on a MAP_PRIVATE shmem mapping.  Instead it wrote to the shmem file,
even when that had not been opened for writing.  Though, fortunately,
that could only happen where there was a hole in the file.

Fix the shmem-backed implementation of UFFDIO_COPY to create private
memory for MAP_PRIVATE mappings.  The hugetlbfs-backed implementation
was already correct.

This change is visible to userland, if userfaultfd has been used in
unintended ways: so it introduces a small risk of incompatibility, but
is necessary in order to respect file permissions.

An app that uses UFFDIO_COPY for anything like postcopy live migration
won't notice the difference, and in fact it'll run faster because there
will be no copy-on-write and memory waste in the tmpfs pagecache
anymore.

Userfaults on MAP_PRIVATE shmem keep triggering only on file holes like
before.

The real zeropage can also be built on a MAP_PRIVATE shmem mapping
through UFFDIO_ZEROPAGE and that's safe because the zeropage pte is
never dirty, in turn even an mprotect upgrading the vma permission from
PROT_READ to PROT_READ|PROT_WRITE won't make the zeropage pte writable.

Link: http://lkml.kernel.org/r/20181126173452.26955-3-aarcange@redhat.com
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: use ENOENT instead of EFAULT if the atomic copy user fails

commit 9e368259ad988356c4c95150fafd1a06af095d98 upstream.

Patch series "userfaultfd shmem updates".

Jann found two bugs in the userfaultfd shmem MAP_SHARED backend: the
lack of the VM_MAYWRITE check and the lack of i_size checks.

Then looking into the above we also fixed the MAP_PRIVATE case.

Hugh by source review also found a data loss source if UFFDIO_COPY is
used on shmem MAP_SHARED PROT_READ mappings (the production usages
incidentally run with PROT_READ|PROT_WRITE, so the data loss couldn't
happen in those production usages like with QEMU).

The whole patchset is marked for stable.

We verified QEMU postcopy live migration with guest running on shmem
MAP_PRIVATE run as well as before after the fix of shmem MAP_PRIVATE.
Regardless if it's shmem or hugetlbfs or MAP_PRIVATE or MAP_SHARED, QEMU
unconditionally invokes a punch hole if the guest mapping is filebacked
and a MADV_DONTNEED too (needed to get rid of the MAP_PRIVATE COWs and
for the anon backend).

This patch (of 5):

We internally used EFAULT to communicate with the caller, switch to
ENOENT, so EFAULT can be used as a non internal retval.

Link: http://lkml.kernel.org/r/20181126173452.26955-2-aarcange@redhat.com
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/meson: Fix OOB memory accesses in meson_viu_set_osd_lut()

commit 97b2a3180a559a33852ac0cd77904166069484fd upstream.

Currently on driver bringup with KASAN enabled, meson triggers an OOB
memory access as shown below:

[  117.904528] ==================================================================
[  117.904560] BUG: KASAN: global-out-of-bounds in meson_viu_set_osd_lut+0x7a0/0x890
[  117.904588] Read of size 4 at addr ffff20000a63ce24 by task systemd-udevd/498
[  117.904601]
[  118.083372] CPU: 4 PID: 498 Comm: systemd-udevd Not tainted 4.20.0-rc3Lyude-Test+ #20
[  118.091143] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[  118.099768] Call trace:
[  118.102181]  dump_backtrace+0x0/0x3e8
[  118.105796]  show_stack+0x14/0x20
[  118.109083]  dump_stack+0x130/0x1c4
[  118.112539]  print_address_description+0x60/0x25c
[  118.117214]  kasan_report+0x1b4/0x368
[  118.120851]  __asan_report_load4_noabort+0x18/0x20
[  118.125566]  meson_viu_set_osd_lut+0x7a0/0x890
[  118.129953]  meson_viu_init+0x10c/0x290
[  118.133741]  meson_drv_bind_master+0x474/0x748
[  118.138141]  meson_drv_bind+0x10/0x18
[  118.141760]  try_to_bring_up_master+0x3d8/0x768
[  118.146249]  component_add+0x214/0x570
[  118.149978]  meson_dw_hdmi_probe+0x18/0x20 [meson_dw_hdmi]
[  118.155404]  platform_drv_probe+0x98/0x138
[  118.159455]  really_probe+0x2a0/0xa70
[  118.163070]  driver_probe_device+0x1b4/0x2d8
[  118.167299]  __driver_attach+0x200/0x280
[  118.171189]  bus_for_each_dev+0x10c/0x1a8
[  118.175144]  driver_attach+0x38/0x50
[  118.178681]  bus_add_driver+0x330/0x608
[  118.182471]  driver_register+0x140/0x388
[  118.186361]  __platform_driver_register+0xc8/0x108
[  118.191117]  meson_dw_hdmi_platform_driver_init+0x1c/0x1000 [meson_dw_hdmi]
[  118.198022]  do_one_initcall+0x12c/0x3bc
[  118.201883]  do_init_module+0x1fc/0x638
[  118.205673]  load_module+0x4b4c/0x6808
[  118.209387]  __se_sys_init_module+0x2e8/0x3c0
[  118.213699]  __arm64_sys_init_module+0x68/0x98
[  118.218100]  el0_svc_common+0x104/0x210
[  118.221893]  el0_svc_handler+0x48/0xb8
[  118.225594]  el0_svc+0x8/0xc
[  118.228429]
[  118.229887] The buggy address belongs to the variable:
[  118.235007]  eotf_33_linear_mapping+0x84/0xc0
[  118.239301]
[  118.240752] Memory state around the buggy address:
[  118.245522]  ffff20000a63cd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  118.252695]  ffff20000a63cd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  118.259850] >ffff20000a63ce00: 00 00 00 00 04 fa fa fa fa fa fa fa 00 00 00 00
[  118.267000]                                ^
[  118.271222]  ffff20000a63ce80: 00 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[  118.278393]  ffff20000a63cf00: 00 00 00 00 00 00 00 00 00 00 00 00 04 fa fa fa
[  118.285542] ==================================================================
[  118.292699] Disabling lock debugging due to kernel taint

It seems that when looping through the OSD EOTF LUT maps, we use the
same max iterator for OETF: 20. This is wrong though, since 20*2 is 40,
which means that we'll stop out of bounds on the EOTF maps.

But, this whole thing is already confusing enough to read through as-is,
so let's just replace all of the hardcoded sizes with
OSD_(OETF/EOTF)_LUT_SIZE / 2.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v4.10+
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181125012117.31915-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/meson: Enable fast_io in meson_dw_hdmi_regmap_config

commit 995b278e4723b26f8ebf0e7c119286d16c712747 upstream.

Seeing as we use this registermap in the context of our IRQ handlers, we
need to be using spinlocks for reading/writing registers so that we can
still read them from IRQ handlers without having to grab any mutexes and
accidentally sleep. We don't currently do this, as pointed out by
lockdep:

[   18.403770] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[   18.406744] in_atomic(): 1, irqs_disabled(): 128, pid: 68, name: kworker/u17:0
[   18.413864] INFO: lockdep is turned off.
[   18.417675] irq event stamp: 12
[   18.420778] hardirqs last  enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60
[   18.429510] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60
[   18.437345] softirqs last  enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50
[   18.446684] softirqs last disabled at (0): [<0000000000000000>]           (null)
[   18.453979] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G        W  O      4.20.0-rc3Lyude-Test+ #9
[   18.469839] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[   18.480037] Workqueue: hci0 hci_power_on [bluetooth]
[   18.487138] Call trace:
[   18.494192]  dump_backtrace+0x0/0x1b8
[   18.501280]  show_stack+0x14/0x20
[   18.508361]  dump_stack+0xbc/0xf4
[   18.515427]  ___might_sleep+0x140/0x1d8
[   18.522515]  __might_sleep+0x50/0x88
[   18.529582]  __mutex_lock+0x60/0x870
[   18.536621]  mutex_lock_nested+0x1c/0x28
[   18.543660]  regmap_lock_mutex+0x10/0x18
[   18.550696]  regmap_read+0x38/0x70
[   18.557727]  dw_hdmi_hardirq+0x58/0x138 [dw_hdmi]
[   18.564804]  __handle_irq_event_percpu+0xac/0x410
[   18.571891]  handle_irq_event_percpu+0x34/0x88
[   18.578982]  handle_irq_event+0x48/0x78
[   18.586051]  handle_fasteoi_irq+0xac/0x160
[   18.593061]  generic_handle_irq+0x24/0x38
[   18.599989]  __handle_domain_irq+0x60/0xb8
[   18.606857]  gic_handle_irq+0x50/0xa0
[   18.613659]  el1_irq+0xb4/0x130
[   18.620394]  debug_lockdep_rcu_enabled+0x2c/0x30
[   18.627111]  schedule+0x38/0xa0
[   18.633781]  schedule_timeout+0x3a8/0x510
[   18.640389]  wait_for_common+0x15c/0x180
[   18.646905]  wait_for_completion+0x14/0x20
[   18.653319]  mmc_wait_for_req_done+0x28/0x168
[   18.659693]  mmc_wait_for_req+0xa8/0xe8
[   18.665978]  mmc_wait_for_cmd+0x64/0x98
[   18.672180]  mmc_io_rw_direct_host+0x94/0x130
[   18.678385]  mmc_io_rw_direct+0x10/0x18
[   18.684516]  sdio_enable_func+0xe8/0x1d0
[   18.690627]  btsdio_open+0x24/0xc0 [btsdio]
[   18.696821]  hci_dev_do_open+0x64/0x598 [bluetooth]
[   18.703025]  hci_power_on+0x50/0x270 [bluetooth]
[   18.709163]  process_one_work+0x2a0/0x6e0
[   18.715252]  worker_thread+0x40/0x448
[   18.721310]  kthread+0x12c/0x130
[   18.727326]  ret_from_fork+0x10/0x1c
[   18.735555] ------------[ cut here ]------------
[   18.741430] do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000006265ec59>] wait_for_common+0x140/0x180
[   18.752417] WARNING: CPU: 0 PID: 68 at kernel/sched/core.c:6096 __might_sleep+0x7c/0x88
[   18.760553] Modules linked in: dm_mirror dm_region_hash dm_log dm_mod
btsdio bluetooth snd_soc_hdmi_codec dw_hdmi_i2s_audio ecdh_generic
brcmfmac brcmutil cfg80211 rfkill ir_nec_decoder meson_dw_hdmi(O)
dw_hdmi rc_geekbox meson_rng meson_ir ao_cec rng_core rc_core cec
leds_pwm efivars nfsd ip_tables x_tables crc32_generic f2fs uas
meson_gxbb_wdt pwm_meson efivarfs ipv6
[   18.799469] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G        W  O      4.20.0-rc3Lyude-Test+ #9
[   18.808858] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[   18.818045] Workqueue: hci0 hci_power_on [bluetooth]
[   18.824088] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[   18.829891] pc : __might_sleep+0x7c/0x88
[   18.835722] lr : __might_sleep+0x7c/0x88
[   18.841256] sp : ffff000008003cb0
[   18.846751] x29: ffff000008003cb0 x28: 0000000000000000
[   18.852269] x27: ffff00000938e000 x26: ffff800010283000
[   18.857726] x25: ffff800010353280 x24: ffff00000868ef50
[   18.863166] x23: 0000000000000000 x22: 0000000000000000
[   18.868551] x21: 0000000000000000 x20: 000000000000038c
[   18.873850] x19: ffff000008cd08c0 x18: 0000000000000010
[   18.879081] x17: ffff000008a68cb0 x16: 0000000000000000
[   18.884197] x15: 0000000000aaaaaa x14: 0e200e200e200e20
[   18.889239] x13: 0000000000000001 x12: 00000000ffffffff
[   18.894261] x11: ffff000008adfa48 x10: 0000000000000001
[   18.899517] x9 : ffff0000092a0158 x8 : 0000000000000000
[   18.904674] x7 : ffff00000812136c x6 : 0000000000000000
[   18.909895] x5 : 0000000000000000 x4 : 0000000000000001
[   18.915080] x3 : 0000000000000007 x2 : 0000000000000007
[   18.920269] x1 : 99ab8e9ebb6c8500 x0 : 0000000000000000
[   18.925443] Call trace:
[   18.929904]  __might_sleep+0x7c/0x88
[   18.934311]  __mutex_lock+0x60/0x870
[   18.938687]  mutex_lock_nested+0x1c/0x28
[   18.943076]  regmap_lock_mutex+0x10/0x18
[   18.947453]  regmap_read+0x38/0x70
[   18.951842]  dw_hdmi_hardirq+0x58/0x138 [dw_hdmi]
[   18.956269]  __handle_irq_event_percpu+0xac/0x410
[   18.960712]  handle_irq_event_percpu+0x34/0x88
[   18.965176]  handle_irq_event+0x48/0x78
[   18.969612]  handle_fasteoi_irq+0xac/0x160
[   18.974058]  generic_handle_irq+0x24/0x38
[   18.978501]  __handle_domain_irq+0x60/0xb8
[   18.982938]  gic_handle_irq+0x50/0xa0
[   18.987351]  el1_irq+0xb4/0x130
[   18.991734]  debug_lockdep_rcu_enabled+0x2c/0x30
[   18.996180]  schedule+0x38/0xa0
[   19.000609]  schedule_timeout+0x3a8/0x510
[   19.005064]  wait_for_common+0x15c/0x180
[   19.009513]  wait_for_completion+0x14/0x20
[   19.013951]  mmc_wait_for_req_done+0x28/0x168
[   19.018402]  mmc_wait_for_req+0xa8/0xe8
[   19.022809]  mmc_wait_for_cmd+0x64/0x98
[   19.027177]  mmc_io_rw_direct_host+0x94/0x130
[   19.031563]  mmc_io_rw_direct+0x10/0x18
[   19.035922]  sdio_enable_func+0xe8/0x1d0
[   19.040294]  btsdio_open+0x24/0xc0 [btsdio]
[   19.044742]  hci_dev_do_open+0x64/0x598 [bluetooth]
[   19.049228]  hci_power_on+0x50/0x270 [bluetooth]
[   19.053687]  process_one_work+0x2a0/0x6e0
[   19.058143]  worker_thread+0x40/0x448
[   19.062608]  kthread+0x12c/0x130
[   19.067064]  ret_from_fork+0x10/0x1c
[   19.071513] irq event stamp: 12
[   19.075937] hardirqs last  enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60
[   19.083560] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60
[   19.091401] softirqs last  enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50
[   19.100801] softirqs last disabled at (0): [<0000000000000000>]           (null)
[   19.108135] ---[ end trace 38c4920787b88c75 ]---

So, fix this by enabling the fast_io option in our regmap config so that
regmap uses spinlocks for locking instead of mutexes.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v4.12+
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124191238.28276-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: set is_master to 0 upon drm_new_set_master() failure

commit 23a336b34258aba3b50ea6863cca4e81b5ef6384 upstream.

When drm_new_set_master() fails, set is_master to 0, to prevent a
possible NULL pointer deref.

Here is a problematic flow: we check is_master in drm_is_current_master(),
then proceed to call drm_lease_owner() passing master. If we do not restore
is_master status when drm_new_set_master() fails, we may have a situation
in which is_master will be 1 and master itself, NULL, leading to the deref
of a NULL pointer in drm_lease_owner().

This fixes the following OOPS, observed on an ArchLinux running a 4.19.2
kernel:

[   97.804282] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[   97.807224] PGD 0 P4D 0
[   97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI
[   97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P           OE     4.19.2-arch1-1-ARCH #1
[   97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018
[   97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm]
[   97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44
[   97.807224] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202
[   97.807224] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88
[   97.807224] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000
[   97.807224] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000
[   97.807224] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888
[   97.807224] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8
[   97.807224] FS:  00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000
[   97.807224] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   97.807224] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0
[   97.807224] Call Trace:
[   97.807224]  drm_is_current_master+0x1a/0x30 [drm]
[   97.807224]  drm_master_release+0x3e/0x130 [drm]
[   97.807224]  drm_file_free.part.0+0x2be/0x2d0 [drm]
[   97.807224]  drm_open+0x1ba/0x1e0 [drm]
[   97.807224]  drm_stub_open+0xaf/0xe0 [drm]
[   97.807224]  chrdev_open+0xa3/0x1b0
[   97.807224]  ? cdev_put.part.0+0x20/0x20
[   97.807224]  do_dentry_open+0x132/0x340
[   97.807224]  path_openat+0x2d1/0x14e0
[   97.807224]  ? mem_cgroup_commit_charge+0x7a/0x520
[   97.807224]  do_filp_open+0x93/0x100
[   97.807224]  ? __check_object_size+0x102/0x189
[   97.807224]  ? _raw_spin_unlock+0x16/0x30
[   97.807224]  do_sys_open+0x186/0x210
[   97.807224]  do_syscall_64+0x5b/0x170
[   97.807224]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   97.807224] RIP: 0033:0x7f4147b07976
[   97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44
[   97.807224] RSP: 002b:00007ffcced96ca0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[   97.807224] RAX: ffffffffffffffda RBX: 00005619d5037f80 RCX: 00007f4147b07976
[   97.807224] RDX: 0000000000000002 RSI: 00005619d46b969c RDI: 00000000ffffff9c
[   98.040039] RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000000
[   98.040039] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000024
[   98.040039] R13: 0000000000000012 R14: 00005619d5035950 R15: 0000000000000012
[   98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid
[   98.040039]  dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler
[   98.040039] CR2: 0000000000000080
[   98.040039] ---[ end trace 3b65093b6fe62b2f ]---
[   98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm]
[   98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44
[   98.040039] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202
[   98.040039] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88
[   98.040039] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000
[   98.040039] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000
[   98.040039] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888
[   98.040039] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8
[   98.040039] FS:  00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000
[   98.040039] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   98.040039] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0

Signed-off-by: Sergio Correia <sergio@correia.cc>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122053329.2692-1-sergio@correia.cc
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Fix incorrect free on ioregs

commit dc25ab067645eabd037f1a23d49a666f9e0b8c68 upstream.

If the platform has no IO space, ioregs is placed next to the already
allocated regs. In this case, it should not be separately freed.

This prevents a kernel warning from __vunmap "Trying to vfree()
nonexistent vm area" when unloading the driver.

Fixes: 0dd68309b9c5 ("drm/ast: Try to use MMIO registers when PIO isn't supported")

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Avoid load failure due to unknown link width

commit db7a691a1551a748cb92d9c89c6b190ea87e28d5 upstream.

If the firmware reports a connection width that is not 1x, 4x, 8x or 12x
it causes the driver to fail during initialization.

To prevent this failure every time a new width is introduced to the RDMA
stack, we will set a default 4x width for these widths which ar unknown to
the driver.

This is needed to allow to run old kernels with new firmware.

Cc: <stable@vger.kernel.org> # 4.1
Fixes: 1b5daf11b015 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode")
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: fix mips_get_syscall_arg o32 check

commit c50cbd85cd7027d32ac5945bb60217936b4f7eaf upstream.

When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should
use the task specified as its argument instead of the current task.

This potentially affects all syscall_get_arguments() users
who specify tasks different from the current.

Fixes: c0ff3c53d4f99 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21185/
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>