drm/ttm: enable TTM TT object kerneldoc v2

Fix the remaining warnings and finally enable this.

v2: add caching enum link

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908132933.3269-8-christian.koenig@amd.com

drm/ttm: enable TTM placement kerneldoc

Fix the last remaining warning and finally enable this.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908132933.3269-7-christian.koenig@amd.com

drm/ttm: enable TTM resource object kerneldoc v2

Fix the last two remaining warnings and finally enable this.

v2: add caching enum link

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908132933.3269-6-christian.koenig@amd.com

drm/ttm: enable TTM device object kerneldoc v2

Fix the remaining warnings, switch to inline structure documentation
and finally enable this.

v2: adjust based on suggestions from Alex

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908132933.3269-5-christian.koenig@amd.com

drm/ttm: add kerneldoc for enum ttm_caching

Briefly describe what this is all about.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908132933.3269-4-christian.koenig@amd.com

drm/ttm: add some general module kerneldoc

For now just a brief description of what TTM is all about.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908132933.3269-3-christian.koenig@amd.com

drm/ttm: remove the outdated kerneldoc section

Clean up to start over with new and more accurate documentation.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908132933.3269-2-christian.koenig@amd.com

drm/mcde: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135602.4476-1-caihuoqing@baidu.com

drm/sched: Fix drm_sched_fence_free() so it can be passed an uninitialized fence

drm_sched_job_cleanup() will pass an uninitialized fence to
drm_sched_fence_free(), which will cause to_drm_sched_fence() to return
a NULL fence object, causing a NULL pointer deref when this NULL object
is passed to kmem_cache_free().

Let's create a new drm_sched_fence_free() function that takes a
drm_sched_fence pointer and suffix the old function with _rcu. While at
it, complain if drm_sched_fence_free() is passed an initialized fence
or if drm_sched_fence_free_rcu() is passed an uninitialized fence.

Fixes: dbe48d030b28 ("drm/sched: Split drm_sched_job_init")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903120554.444101-1-boris.brezillon@collabora.com

drm/panel: otm8009a: add a 60 fps mode

This patch adds a 60 fps mode to the Orisetech OTM8009A panel.
The 50 fps mode is left as preferred.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902150351.3779-1-raphael.gallais-pou@foss.st.com

drm: Improve the output_poll_changed description

this callback was used by drm_kms_helper_hotplug_event()

V2: (Thanks for Daniel's suggestions)
- remove the FIXME below.since with the drm_client
- infrastructure and the generic fbdev emulation we've
- resolved this all very neatly now.

V3: Add comments that This hook is deprecated
- new implementation methods instead of this hook

v4: used by drm_kms_helper_hotplug_event()
- drm_fb_helper_hotplug_changed() is not found
instead by drm_kms_helper_hotplug_event()

Signed-off-by: ZhiJie.Zhang <zhangzhijie@loongson.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903032402.11935-1-zhangzhijie@loongson.cn

drm/ttm: cleanup ttm_resource_compat

Move that function into the resource handling and remove an unused parameter.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831112110.113196-1-christian.koenig@amd.com

dma-buf: clarify dma_fence_add_callback documentation

That the caller doesn't need to keep a reference is rather
risky and not defensive at all.

Especially dma_buf_poll got that horrible wrong, so better
remove that sentence and also clarify that the callback
might be called in atomic or interrupt context.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901120240.7339-3-christian.koenig@amd.com

dma-buf: clarify dma_fence_ops->wait documentation

This callback is pretty much deprecated and should not be used by new implementations.

Clarify that in the documentation as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901120240.7339-2-christian.koenig@amd.com

dma-buf: cleanup kerneldoc of removed component

The seqno-fence was removed, cleanup the kerneldoc include as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Fixes: 992c238188a8 ("dma-buf: nuke seqno-fence")
Link: https://patchwork.freedesktop.org/patch/msgid/20210901080002.5892-1-christian.koenig@amd.com

dma-buf: nuke DMA_FENCE_TRACE macros v2

Only the DRM GPU scheduler, radeon and amdgpu where using them and they depend
on a non existing config option to actually emit some code.

v2: keep the signal path as is for now

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818105443.1578-1-christian.koenig@amd.com

drm/panfrost: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831075327.653-1-caihuoqing@baidu.com

panfrost: Don't cleanup the job if it was successfully queued

The labels are misleading. Even though they are all prefixed with 'fail_'
the success case also takes that path, and we should definitely not
cleanup the job if it's been queued. While at it, let's rename those
labels so we don't do the same mistake again.

Fixes: 53516280cc38 ("drm/panfrost: use scheduler dependency tracking")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Steven Price <steven.price@arm.com>
Tested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831133556.236984-1-boris.brezillon@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210831133556.236984-1-boris.brezillon@collabora.com

drm/ttm: Clear all DMA mappings on demand

Used by drivers supporting hot unplug to handle all
DMA IOMMU group related dependencies before the group
is removed during device removal and we try to access
it after free when last device pointer from user space
is dropped.

v3:
Switch to ttm_bo_get_unless_zerom
Iterate bdev for pinned list
Switch to ttm_tt_unpopulate

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827203910.5565-3-andrey.grodzovsky@amd.com

drm/sun4i: Fix macros in sun8i_csc.h

Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual
recommendation of having arguments enclosed in parenthesis. While that
didn't change anything for quite sometime, it actually become important
after CSC code rework with commit ea067aee45a8 ("drm/sun4i: de2/de3:
Remove redundant CSC matrices").

Without this fix, colours are completely off for supported YVU formats
on SoCs with DE2 (A64, H3, R40, etc.).

Fix the issue by enclosing macro arguments in parenthesis.

Cc: stable@vger.kernel.org # 5.12+
Fixes: 883029390550 ("drm/sun4i: Add DE2 CSC library")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831184819.93670-1-jernej.skrabec@gmail.com

drm/sun4i: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135740.4826-1-caihuoqing@baidu.com

drm/vc4: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135903.4931-1-caihuoqing@baidu.com

drm: adv7511: Convert to SPDX identifier

use SPDX-License-Identifier instead of a verbose license text

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210822072111.628-1-caihuoqing@baidu.com

drm/bridge: cdns: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135048.4305-1-caihuoqing@baidu.com

drm/bridge: it66121: Wait for next bridge to be probed

If run before the next bridge is initialized, of_drm_find_bridge() will
give us a NULL pointer.

If that's the case, return -EPROBE_DEFER; we may have more luck next
time.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827163956.27517-2-paul@crapouillou.net

drm/bridge: it66121: Initialize {device,vendor}_ids

These two arrays are populated with data read from the I2C device
through regmap_read(), and the data is then compared with hardcoded
vendor/product ID values of supported chips.

However, the return value of regmap_read() was never checked. This is
fine, as long as the two arrays are zero-initialized, so that we don't
compare the vendor/product IDs against whatever garbage is left on the
stack.

Address this issue by zero-initializing these two arrays.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827163956.27517-1-paul@crapouillou.net

drm/bridge: anx7625: enable DSI EOTP

Enable DSI EOTP feature for fixing some panel screen constant shift issue.
Removing MIPI flag MIPI_DSI_MODE_NO_EOT_PACKET to enable DSI EOTP.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819060110.3427256-1-xji@analogixsemi.com

drm/ttm: Create pinned list

This list will be used to capture all non VRAM BOs not
on LRU so when device is hot unplugged we can iterate
the list and unmap DMA mappings before device is removed.

v2: Reanme function to ttm_bo_move_to_pinned
v3: Move the pinned list to ttm device

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/451614/?series=93971

dma-resv: Give the docs a do-over

Specifically document the new/clarified rules around how the shared
fences do not have any ordering requirements against the exclusive
fence.

But also document all the things a bit better, given how central
struct dma_resv to dynamic buffer management the docs have been very
inadequat.

- Lots more links to other pieces of the puzzle. Unfortunately
  ttm_buffer_object has no docs, so no links :-(

- Explain/complain a bit about dma_resv_locking_ctx(). I still don't
  like that one, but fixing the ttm call chains is going to be
  horrible. Plus we want to plug in real slowpath locking when we do
  that anyway.

- Main part of the patch is some actual docs for struct dma_resv.

Overall I think we still have a lot of bad naming in this area (e.g.
dma_resv.fence is singular, but contains the multiple shared fences),
but I think that's more indicative of how the semantics and rules are
just not great.

Another thing that's real awkard is how chaining exclusive fences
right now means direct dma_resv.exclusive_fence pointer access with an
rcu_assign_pointer. Not so great either.

v2:
- Fix a pile of typos (Matt, Jason)
- Hammer it in that breaking the rules leads to use-after-free issues
  around dma-buf sharing (Christian)

Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-21-daniel.vetter@ffwll.ch

drm/msm: Don't break exclusive fence ordering

There's only one exclusive slot, and we must not break the ordering.

Adding a new exclusive fence drops all previous fences from the
dma_resv. To avoid violating the signalling order we err on the side of
over-synchronizing by waiting for the existing fences, even if
userspace asked us to ignore them.

A better fix would be to us a dma_fence_chain or _array like e.g.
amdgpu now uses, but
- msm has a synchronous dma_fence_wait for anything from another
  context, so doesn't seem to care much,
- and it probably makes sense to lift this into dma-resv.c code as a
  proper concept, so that drivers don't have to hack up their own
  solution each on their own.

v2: Improve commit message per Lucas' suggestion.

Cc: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-17-daniel.vetter@ffwll.ch

drm/msm: Use scheduler dependency handling

drm_sched_job_init is already at the right place, so this boils down
to deleting code.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-13-daniel.vetter@ffwll.ch

drm/v3d: Use scheduler dependency handling

With the prep work out of the way this isn't tricky anymore.

Aside: The chaining of the various jobs is a bit awkward, with the
possibility of failure in bad places. I think with the
drm_sched_job_init/arm split and maybe preloading the
job->dependencies xarray this should be fixable.

v2: Rebase over renamed function names for adding dependencies.

Reviewed-by: Melissa Wen <mwen@igalia.com> (v1)
Acked-by: Emma Anholt <emma@anholt.net>
Cc: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Emma Anholt <emma@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-11-daniel.vetter@ffwll.ch

drm/v3d: Move drm_sched_job_init to v3d_job_init

Prep work for using the scheduler dependency handling. We need to call
drm_sched_job_init earlier so we can use the new drm_sched_job_await*
functions for dependency handling here.

v2: Slightly better commit message and rebase to include the
drm_sched_job_arm() call (Emma).

v3: Cleanup jobs under construction correctly (Emma)

v4: Rebase over perfmon patch

Reviewed-by: Melissa Wen <mwen@igalia.com> (v3)
Acked-by: Emma Anholt <emma@anholt.net>
Cc: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Emma Anholt <emma@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-10-daniel.vetter@ffwll.ch

drm/lima: use scheduler dependency tracking

Nothing special going on here.

Aside reviewing the code, it seems like drm_sched_job_arm() should be
moved into lima_sched_context_queue_task and put under some mutex
together with drm_sched_push_job(). See the kerneldoc for
drm_sched_push_job().

v2: Rebase over renamed functions to add dependencies.

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: lima@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-9-daniel.vetter@ffwll.ch

drm/panfrost: use scheduler dependency tracking

Just deletes some code that's now more shared.

Note that thanks to the split into drm_sched_job_init/arm we can now
easily pull the _init() part from under the submission lock way ahead
where we're adding the sync file in-fences as dependencies.

v2: Correctly clean up the partially set up job, now that job_init()
and job_arm() are apart (Emma).

v3: Rebased over renamed functions for adding depdencies

Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Steven Price <steven.price@arm.com> (v3)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Emma Anholt <emma@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-8-daniel.vetter@ffwll.ch

drm/sched: improve docs around drm_sched_entity

I found a few too many things that are tricky and not documented, so I
started typing.

I found a few more things that looked broken while typing, see the
varios FIXME in drm_sched_entity.

Also some of the usual logics:
- actually include sched_entity.c declarations, that was lost in the
  move here: 620e762f9a98 ("drm/scheduler: move entity handling into
  separate file")

- Ditch the kerneldoc for internal functions, keep the comments where
  they're describing more than what the function name already implies.

- Switch drm_sched_entity to inline docs.

Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-7-daniel.vetter@ffwll.ch

drm/sched: drop entity parameter from drm_sched_push_job

Originally a job was only bound to the queue when we pushed this, but
now that's done in drm_sched_job_init, making that parameter entirely
redundant.

Remove it.

The same applies to the context parameter in
lima_sched_context_queue_task, simplify that too.

v2:
Rebase on top of msm adopting drm/sched

Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Emma Anholt <emma@anholt.net>
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Steven Price <steven.price@arm.com> (v1)
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chen Li <chenli@uniontech.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Deepak R Varma <mh12gx2825@gmail.com>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Dennis Li <Dennis.Li@amd.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Melissa Wen <mwen@igalia.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-6-daniel.vetter@ffwll.ch

drm/sched: Add dependency tracking

Instead of just a callback we can just glue in the gem helpers that
panfrost, v3d and lima currently use. There's really not that many
ways to skin this cat.

v2/3: Rebased.

v4: Repaint this shed. The functions are now called _add_dependency()
and _add_implicit_dependency()

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (v3)
Reviewed-by: Steven Price <steven.price@arm.com> (v1)
Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Nirmoy Das <nirmoy.aiemd@gmail.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-5-daniel.vetter@ffwll.ch

drm/sched: Barriers are needed for entity->last_scheduled

It might be good enough on x86 with just READ_ONCE, but the write side
should then at least be WRITE_ONCE because x86 has total store order.

It's definitely not enough on arm.

Fix this proplery, which means
- explain the need for the barrier in both places
- point at the other side in each comment

Also pull out the !sched_list case as the first check, so that the
code flow is clearer.

While at it sprinkle some comments around because it was very
non-obvious to me what's actually going on here and why.

Note that we really need full barriers here, at first I thought
store-release and load-acquire on ->last_scheduled would be enough,
but we actually requiring ordering between that and the queue state.

v2: Put smp_rmp() in the right place and fix up comment (Andrey)

Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-4-daniel.vetter@ffwll.ch

drm/msm: Improve drm/sched point of no return rules

Originally drm_sched_job_init was the point of no return, after which
drivers really should submit a job. I've split that up, which allows
us to fix this issue pretty easily.

Only thing we have to take care of is to not skip to error paths after
that. Other drivers do this the same for out-fence and similar things.

v2: It's not really a bugfix, just an improvement, since all
drm_sched_job_arm does is reserve the fence number. And gaps should be
fine, as long as the drm_sched_job doesn't escape anywhere at all.

For robustness it's still better to align with other drivers here and
not bail out after job_arm().

v3: I misplaced drm_sched_job_arm by _one_ line! Thanks to Rob for
testing and debug help.

Cc: Rob Clark <robdclark@chromium.org>
Cc: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826093334.1117944-1-daniel.vetter@ffwll.ch

drm/sched: Split drm_sched_job_init

This is a very confusingly named function, because not just does it
init an object, it arms it and provides a point of no return for
pushing a job into the scheduler. It would be nice if that's a bit
clearer in the interface.

But the real reason is that I want to push the dependency tracking
helpers into the scheduler code, and that means drm_sched_job_init
must be called a lot earlier, without arming the job.

v2:
- don't change .gitignore (Steven)
- don't forget v3d (Emma)

v3: Emma noticed that I leak the memory allocated in
drm_sched_job_init if we bail out before the point of no return in
subsequent driver patches. To be able to fix this change
drm_sched_job_cleanup() so it can handle being called both before and
after drm_sched_job_arm().

Also improve the kerneldoc for this.

v4:
- Fix the drm_sched_job_cleanup logic, I inverted the booleans, as
  usual (Melissa)

- Christian pointed out that drm_sched_entity_select_rq() also needs
  to be moved into drm_sched_job_arm, which made me realize that the
  job->id definitely needs to be moved too.

  Shuffle things to fit between job_init and job_arm.

v5:
Reshuffle the split between init/arm once more, amdgpu abuses
drm_sched.ready to signal gpu reset failures. Also document this
somewhat. (Christian)

v6:
Rebase on top of the msm drm/sched support. Note that the
drm_sched_job_init() call is completely misplaced, and hence also the
split-out drm_sched_entity_push_job(). I've put in a FIXME which the next
patch will address.

v7: Drop the FIXME in msm, after discussions with Rob I agree it shouldn't
be a problem where it is now.

Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Emma Anholt <emma@anholt.net>
Acked-by: Steven Price <steven.price@arm.com> (v2)
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (v5)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: Deepak R Varma <mh12gx2825@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: Chen Li <chenli@uniontech.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Dennis Li <Dennis.Li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Emma Anholt <emma@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210817084917.3555822-1-daniel.vetter@ffwll.ch

drm/plane: Fix comment typo

Minor typofix noticed when reading the KMS documentation.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210829160401.4588-1-alyssa@rosenzweig.io

GPU: drm: fix style errors

This patch fixes style issues in drm_ioctl.c

Signed-off-by: F.A.Sulaiman <asha.16@itfac.mrt.ac.lk>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210828123942.1556-1-asha.16@itfac.mrt.ac.lk

drm/ttm: optimize the pool shrinker a bit v2

Switch back to using a spinlock again by moving the IOMMU unmap outside
of the locked region.

This avoids contention especially while freeing pages.

v2: Add a comment explaining why we need sync_shrinkers().

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820120528.81114-3-christian.koenig@amd.com

mm/vmscan: add sync_shrinkers function v3

While unplugging a device the TTM shrinker implementation
needs a barrier to make sure that all concurrent shrink
operations are done and no other CPU is referring to a
device specific pool any more.

Taking and releasing the shrinker semaphore on the write
side after unmapping and freeing all pages from the device
pool should make sure that no shrinker is running in
paralell.

This allows us to avoid the contented mutex in the TTM pool
implementation for every alloc/free operation.

v2: rework the commit message to make clear why we need this
v3: rename the function and add more doc as suggested by Daniel

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820120528.81114-2-christian.koenig@amd.com

drm/bridge: parade-ps8640: Reorg the macros

Reorg the macros as follows:
(1) Group the registers on the same page together.
(2) Group the register and its bit operation together while indenting
the macros of the bit operation with one space.

Also fix a misnomer for the number of mipi data lanes.

Signed-off-by: Philip Chen <philipchen@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824181140.v2.1.I8ead7431357409f2526e5739ec5bc3ddfd242243@changeid

drm: omap: remove obsolete selection of OMAP2_DSS in config DRM_OMAP

Commit 55b68fb856b5 ("drm/omap: squash omapdrm sub-modules into one")
removes the config OMAP2_DSS in ./drivers/gpu/drm/omapdrm/dss/Kconfig,
while moving the other configs into./drivers/gpu/drm/omapdrm/Kconfig, but
misses to remove an obsolete selection of OMAP2_DSS in config DRM_OMAP.

Hence, ./scripts/checkkconfigsymbols.py warns:

OMAP2_DSS
Referencing files: drivers/gpu/drm/omapdrm/Kconfig

Remove this reference in an obsolete selection.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819112253.16484-6-lukas.bulwahn@gmail.com

drm: zte: remove obsolete DRM Support for ZTE SoCs

Commit 89d4f98ae90d ("ARM: remove zte zx platform") removes the config
ARCH_ZX. So, since then, the DRM Support for ZTE SoCs (config DRM_ZTE)
depends on this removed config ARCH_ZX and cannot be selected.

Fortunately, ./scripts/checkkconfigsymbols.py detects this and warns:

ARCH_ZX
Referencing files: drivers/gpu/drm/zte/Kconfig

So, remove this obsolete DRM support.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819112253.16484-5-lukas.bulwahn@gmail.com

drm: v3d: correct reference to config ARCH_BRCMSTB

Commit 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D
V3.x+") adds the config DRM_V3D, which depends on "ARCH_BCMSTB".

Although, a bit confusing: all Broadcom architectures in
./arch/arm/mach-bcm/Kconfig have the prefix "ARCH_BCM", except for
ARCH_BRCMSTB, i.e., the config for Broadcom BCM7XXX based boards.

So, correct the reference ARCH_BCMSTB to the intended ARCH_BRCMSTB.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819112253.16484-4-lukas.bulwahn@gmail.com

drm: rockchip: remove reference to non-existing config DRM_RGB

commit 1f0f01515172 ("drm/rockchip: Add support for Rockchip Soc RGB
output interface") accidently adds to select the non-existing config
DRM_RGB in ./drivers/gpu/drm/rockchip/Kconfig.

Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:

DRM_RGB
Referencing files: drivers/gpu/drm/rockchip/Kconfig

So, remove the reference to the non-existing config DRM_RGB.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819112253.16484-2-lukas.bulwahn@gmail.com

drm/panfrost: Use upper/lower_32_bits helpers

Use upper_32_bits/lower_32_bits helpers instead of open-coding them.
This is easier to scan quickly compared to bitwise manipulation, and it
is pleasingly symmetric. I noticed this when debugging lock_region,
which had a particularly "creative" way of writing upper_32_bits.

v2: Use helpers for one more call site and add review tag (Steven).

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org> (v1)
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210825153348.4980-1-alyssa.rosenzweig@collabora.com

Merge tag 'drm-misc-intel-oob-hotplug-v1' of git://git./linux/kernel/git/hansg/linux into drm-misc-next

Topic branch for drm-misc / drm-intel for OOB hotplug support for Type-C connectors

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmEf5msUHGhkZWdvZWRl
# QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xUFQgAtBkpLk/oBn6uRcIXCc8KIGs5NqWG
# orVB7c1Ilsd8jdsap6uD2fVVlS7fn5I6hkiyjdRz5A96aLxkF7oCGLATmxGtYd1k
# lZTUOLXGdl2ye798vuwaO8UzpN7s2yiIaI44GCGLT5Qwrpq9D1tykY3ggXH/03t2
# Z8xOB+XLKbcibnWVQL/4Fz+cQ3KzJ8lo10oiZ131b1ytwf/zdKx0fA3yrPA9C0Kv
# V3dbWxYMWfkO+IUieZgMzl2LrbChp8fC6zmPJYdvlpB7AZXrOKD+4K8JdlKPMZNE
# hi5xF4X1tPeTiOo1jju5JN2hnjsc30JuBLemDcV7CLeL01Y4VLdAwHPwyw==
# =Zar+
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Aug 2021 07:29:15 PM CEST
# gpg:                using RSA key BAF03B5D2718411A5E9E177E92EC4779440327DC
# gpg:                issuer "hdegoede@redhat.com"
# gpg: Can't check signature: No public key
From: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/34f13e21-9b1a-5f54-7e03-9705a6b51428@redhat.com

dt-bindings: panel: ili9341: correct indentation

Correct indentation warning:
  ilitek,ili9341.yaml:25:9: [warning] wrong indentation: expected 10 but found 8 (indentation)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819101020.26368-1-krzysztof.kozlowski@canonical.com

drm/r128: switch from 'pci_' to 'dma_' API

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below.

It has been compile tested.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/46ccdd7bffdba1273a1ebb3d6cd2fbe186e0795a.1629667572.git.christophe.jaillet@wanadoo.fr

drm/ttm: remove ttm_tt_destroy_common v2

Move the functionality into ttm_tt_fini and ttm_bo_tt_destroy instead.

We don't need this any more since we removed the unbind from the destroy
code paths in the drivers.

Also add a warning to ttm_tt_fini() if we try to fini a still populated TT
object.

v2: instead of reverting the patch move the functionality to different
places.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-5-christian.koenig@amd.com

drm/radeon: unbind in radeon_ttm_tt_unpopulate()

Doing this in radeon_ttm_tt_destroy() is to late.

It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-4-christian.koenig@amd.com

drm/nouveau: unbind in nouveau_ttm_tt_unpopulate

Doing this in nouveau_ttm_tt_destroy()/nouveau_sgdma_destroy() is to late.

It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-3-christian.koenig@amd.com

drm/amdgpu: unbind in amdgpu_ttm_tt_unpopulate

Doing this in amdgpu_ttm_backend_destroy() is to late.

It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-2-christian.koenig@amd.com

drm/vmwgfx: unbind in vmw_ttm_unpopulate

Doing this in vmw_ttm_destroy() is to late.

It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-1-christian.koenig@amd.com

usb: typec: altmodes/displayport: Notify drm subsys of hotplug events

Use the new drm_connector_oob_hotplug_event() functions to let drm/kms
drivers know about DisplayPort over Type-C hotplug events.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-9-hdegoede@redhat.com

usb: typec: altmodes/displayport: Make dp_altmode_notify() more generic

Make dp_altmode_notify() handle the dp->data.conf == 0 case too,
rather then having separate code-paths for this in various places
which call it.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-8-hdegoede@redhat.com

drm/connector: Add support for out-of-band hotplug notification (v3)

Add a new drm_connector_oob_hotplug_event() function and
oob_hotplug_event drm_connector_funcs member.

On some hardware a hotplug event notification may come from outside the
display driver / device. An example of this is some USB Type-C setups
where the hardware muxes the DisplayPort data and aux-lines but does
not pass the altmode HPD status bit to the GPU's DP HPD pin.

In cases like this the new drm_connector_oob_hotplug_event() function can
be used to report these out-of-band events.

Changes in v2:
- Make drm_connector_oob_hotplug_event() take a fwnode as argument and
  have it call drm_connector_find_by_fwnode() internally. This allows
  making drm_connector_find_by_fwnode() a drm-internal function and
  avoids code outside the drm subsystem potentially holding on the
  a drm_connector reference for a longer period.

Changes in v3:
- Drop the data argument to the drm_connector_oob_hotplug_event
  function since it is not used atm. This can be re-added later when
  a use for it actually arises.

Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-5-hdegoede@redhat.com

drm/connector: Add drm_connector_find_by_fwnode() function (v3)

Add a function to find a connector based on a fwnode.

This will be used by the new drm_connector_oob_hotplug_event()
function which is added by the next patch in this patch-set.

Changes in v2:
- Complete rewrite to use a global connector list in drm_connector.c
  rather then using a class-dev-iter in drm_sysfs.c

Changes in v3:
- Add forward declaration for struct fwnode_handle to drm_crtc_internal.h
  (fixes warning reported by kernel test robot <lkp@intel.com>)

Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-4-hdegoede@redhat.com

drm/connector: Add a fwnode pointer to drm_connector and register with ACPI (v2)

Add a fwnode pointer to struct drm_connector and register an acpi_bus_type
for the connectors with the ACPI subsystem (when CONFIG_ACPI is enabled).

The adding of the fwnode pointer allows drivers to associate a fwnode
that represents a connector with that connector.

When the new fwnode pointer points to an ACPI-companion, then the new
acpi_bus_type will cause the ACPI subsys to bind the device instantiated
for the connector with the fwnode by calling acpi_bind_one(). This will
result in a firmware_node symlink under /sys/class/card#-<connecter-name>/
which helps to verify that the fwnode-s and connectors are properly
matched.

Changes in v2:
- Make drm_connector_cleanup() call fwnode_handle_put() on
  connector->fwnode and document this

Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-3-hdegoede@redhat.com

drm/connector: Give connector sysfs devices there own device_type

Give connector sysfs devices there own device_type, this allows us to
check if a device passed to functions dealing with generic devices is
a drm_connector or not.

A check like this is necessary in the drm_connector_acpi_bus_match()
function added in the next patch in this series.

Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-2-hdegoede@redhat.com

drm/bridge: anx7625: Propagate errors from sp_tx_edid_read()

During the sp_tx_edid_read() call the return value of sp_tx_edid_read()
is ignored, which could cause potential errors to go unhandled.

All errors which are returned by sp_tx_edid_read() are handled in
anx7625_get_edid().

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818171318.1848272-2-robert.foss@linaro.org

drm/bridge: anx7625: Propagate errors from sp_tx_rst_aux()

The return value of sp_tx_rst_aux() is not propagated, which means
both compiler warnings and potential errors not being handled.

Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818171318.1848272-1-robert.foss@linaro.org

drm: Remove unused code to load the non-existing fbcon.ko

Commit 6104c37094e7 ("fbcon: Make fbcon a built-time depency for fbdev")
changed the FRAMEBUFFER_CONSOLE Kconfig symbol from tristate to bool.

But the drm_kms_helper_init() function still attempts to load the fbcon
module, even when this is always built-in since the mentioned change.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818120948.451896-1-javierm@redhat.com

drm: panel-orientation-quirks: Add quirk for the Chuwi Hi10 Pro

The Chuwi Hi10 Pro uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210530110428.12994-5-hdegoede@redhat.com

drm: panel-orientation-quirks: Add quirk for the Samsung Galaxy Book 10.6

The Samsung Galaxy Book 10.6 uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210530110428.12994-4-hdegoede@redhat.com

drm: panel-orientation-quirks: Add quirk for KD Kurio Smart C15200 2-in-1

The KD Kurio Smart C15200 2-in-1 uses  a panel which has been mounted 90
degrees rotated. Add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210530110428.12994-3-hdegoede@redhat.com

drm: panel-orientation-quirks: Update the Lenovo Ideapad D330 quirk (v2)

2 improvements to the Lenovo Ideapad D330 panel-orientation quirks:

1. Some versions of the Lenovo Ideapad D330 have a DMI_PRODUCT_NAME of
"81H3" and others have "81MD". Testing has shown that the "81MD" also has
a 90 degree mounted panel. Drop the DMI_PRODUCT_NAME from the existing
quirk so that the existing quirk matches both variants.

2. Some of the Lenovo Ideapad D330 models have a HD (800x1280) screen
instead of a FHD (1200x1920) screen (both are mounted right-side-up) add
a second Lenovo Ideapad D330 quirk for the HD version.

Changes in v2:
- Add a new quirk for Lenovo Ideapad D330 models with a HD screen instead
  of a FHD screen

Link: https://github.com/systemd/systemd/pull/18884
Acked-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210530110428.12994-2-hdegoede@redhat.com

drm/virtio: support mapping exported vram

Implement virtgpu specific map_dma_buf callback to support mapping
exported vram object dma-bufs. The dma-buf callback is used directly, as
vram objects don't have backing pages and thus can't implement the
drm_gem_object_funcs.get_sg_table callback.

Signed-off-by: David Stevens <stevensd@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210813005441.608293-1-stevensd@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

dma-buf: WARN on dmabuf release with pending attachments

It is expected from the clients to follow the below steps on an imported
dmabuf fd:
a) dmabuf = dma_buf_get(fd) // Get the dmabuf from fd
b) dma_buf_attach(dmabuf); // Clients attach to the dmabuf
   o Here the kernel does some slab allocations, say for
dma_buf_attachment and may be some other slab allocation in the
dmabuf->ops->attach().
c) Client may need to do dma_buf_map_attachment().
d) Accordingly dma_buf_unmap_attachment() should be called.
e) dma_buf_detach () // Clients detach to the dmabuf.
   o Here the slab allocations made in b) are freed.
f) dma_buf_put(dmabuf) // Can free the dmabuf if it is the last
reference.

Now say an erroneous client failed at step c) above thus it directly
called dma_buf_put(), step f) above. Considering that it may be the last
reference to the dmabuf, buffer will be freed with pending attachments
left to the dmabuf which can show up as the 'memory leak'. This should
at least be reported as the WARN().

Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1627043468-16381-1-git-send-email-charante@codeaurora.org
Signed-off-by: Christian König <christian.koenig@amd.com>

dma-buf: nuke seqno-fence

Entirely unused.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729070330.41443-1-christian.koenig@amd.com

drm/tegra: Use fourcc_mod_is_vendor() helper

Rather than open-coding the vendor extraction operation, use the newly
introduced helper macro.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610111236.3814211-3-thierry.reding@gmail.com

drm/arm: malidp: Use fourcc_mod_is_vendor() helper

Rather than open-coding the vendor extraction operation, use the newly
introduced helper macro.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610111236.3814211-2-thierry.reding@gmail.com

drm/fourcc: Add macros to determine the modifier vendor

When working with framebuffer modifiers, it can be useful to extract the
vendor identifier or check a modifier against a given vendor identifier.
Add one macro that extracts the vendor identifier and a helper to check
a modifier against a given vendor identifier.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610111236.3814211-1-thierry.reding@gmail.com

drm: unexport drm_ioctl_permit

Since the last user of drm_ioctl_permit was removed, and it's now only
used in drm_ioctl.c, unexport the symbol.

Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813085450.32494-3-desmondcheongzx@gmail.com

drm/panel: s6d27a1: Add driver for Samsung S6D27A1 display panel

This adds a driver for Samsung S6D27A1 display controller and panel.
This panel is found in the Samsung GT-I8160 mobile phone,
and possibly some other mobile phones.

This display needs manufacturer commands to configure it;
the commands used in this driver were taken from downstream driver
by Gareth Phillips; sadly, there is almost no documentation on what they
actually do.

This driver re-uses the DBI infrastructure to communicate with the display.

This driver is heavily based on WideChips WS2401 display controller
driver by Linus Walleij and on other panel drivers for reference.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
[Up reset out time to 120 ms]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210807133111.5935-3-markuss.broks@gmail.com

drm/panel: Add DT bindings for Samsung S6D27A1 display panel

This adds device-tree bindings for the Samsung S6D27A1 RGB
DPI display panel.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
v1 -> v2:
changed additionalProperties to unevaluatedProperties;
added vci-supply and vccio-supply as required;

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210807133111.5935-2-markuss.broks@gmail.com

drm/vgem: use shmem helpers

Aside from deleting lots of code the real motivation here is to switch
the mmap over to VM_PFNMAP, to be more consistent with what real gpu
drivers do. They're all VM_PFNMAP, which means get_user_pages doesn't
work, and even if you try and there's a struct page behind that,
touching it and mucking around with its refcount can upset drivers
real bad.

v2: Review from Thomas:
- sort #include
- drop more dead code that I didn't spot somehow

v3: select DRM_GEM_SHMEM_HELPER to make it build (intel-gfx-ci)

v4: I got tricked by 0cf2ef46c6c0 ("drm/shmem-helper: Use cached
mappings by default"), and we need WC in vgem because vgem doesn't
have explicit begin/end cpu access ioctls.

Also add a comment why exactly vgem has to use wc.

v5: Don't set obj->base.funcs, it will default to drm_gem_shmem_funcs
(Thomas)

v6: vgem also needs an MMU for remapping

v7: I absolutely butchered the rebases over the vgem mmap change and
revert and broke the patch. Actually go back to v6 from before the
vgem mmap changes.

Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131412.2487363-4-daniel.vetter@ffwll.ch

drm/shmem-helpers: Allocate wc pages on x86

intel-gfx-ci realized that something is not quite coherent anymore on
some platforms for our i915+vgem tests, when I tried to switch vgem
over to shmem helpers.

After lots of head-scratching I realized that I've removed calls to
drm_clflush. And we need those. To make this a bit cleaner use the
same page allocation tooling as ttm, which does internally clflush
(and more, as neeeded on any platform instead of just the intel x86
cpus i915 can be combined with).

Unfortunately this doesn't exist on arm, or as a generic feature. For
that I think only the dma-api can get at wc memory reliably, so maybe
we'd need some kind of GFP_WC flag to do this properly.

v2: Add a TODO comment about what should be done to support this in
other places (Thomas)

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131412.2487363-3-daniel.vetter@ffwll.ch

drm/shmem-helper: Switch to vmf_insert_pfn

We want to stop gup, which isn't the case if we use vmf_insert_page
and VM_MIXEDMAP, because that does not set pte_special.

The motivation here is to stop get_user_pages from working on buffer
object mmaps in general. Quoting some discussion with Thomas:

On Thu, Jul 22, 2021 at 08:22:43PM +0200, Thomas Zimmermann wrote:
> Am 13.07.21 um 22:51 schrieb Daniel Vetter:
> > We want to stop gup, which isn't the case if we use vmf_insert_page
>
> What is gup?

get_user_pages. It pins memory wherever it is, which badly wreaks at least
ttm and could also cause trouble with cma allocations. In both cases
becaue we can't move/reuse these pages anymore.

Now get_user_pages fails when the memory isn't considered "normal", like
with VM_PFNMAP and using vm_insert_pfn. For consistency across all dma-buf
I'm trying (together with Christian König) to roll this out everywhere,
for fewer surprises.

E.g. for 5.14 iirc we merged a patch to do the same for ttm, where it
closes an actual bug (ttm gets really badly confused when there's suddenly
pinned pages where it thought it can move them).

cma allcoations already use VM_PFNMAP (because that's what dma_mmap is
using underneath), as is anything that's using remap_pfn_range. Worst case
we have to revert this patch for shmem helpers if it breaks something, but
I hope that's not the case. On the ttm side we've also had some fallout
that we needed to paper over with clever tricks.
v2: With this shmem gem helpers now definitely need CONFIG_MMU (0day)

v3: add more depends on MMU. For usb drivers this is a bit awkward,
but really it's correct: To be able to provide a contig mapping of
buffers to userspace on !MMU platforms we'd need to use the cma
helpers for these drivers on those platforms. As-is this wont work.

Also not exactly sure why vm_insert_page doesn't go boom, because that
definitely wont fly in practice since the pages are non-contig to
begin with.

v4: Explain the entire motivation a lot more (Thomas)

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131412.2487363-2-daniel.vetter@ffwll.ch

drm/bridge: ti-sn65dsi86: Avoid creating multiple connectors

If we created our own connector because the driver does not support the
NO_CONNECTOR flag, we don't want the downstream bridge to *also* create
a connector.  And if this driver did pass the NO_CONNECTOR flag (and we
supported that mode) this would change nothing.

Fixes: 4e5763f03e10 ("drm/bridge: ti-sn65dsi86: Wrap panel with panel-bridge")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811235253.924867-2-robdclark@gmail.com

drm/edid: fix edid field name

Byte 26 in a edid struct is supposed to be "Blue and white
least-significant 2 bits", not "black and white". Rename the field
accordingly. This field is not used anywhere, so just renaming it here
for correctness.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811205818.156100-1-lucas.demarchi@intel.com

drm/virtio: set non-cross device blob uuid_state

Blob resources without the cross device flag don't have a uuid to share
with other virtio devices. When exporting such blobs, set uuid_state to
STATE_ERR so that virtgpu_virtio_get_uuid doesn't hang.

Signed-off-by: David Stevens <stevensd@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210811040401.1264234-1-stevensd@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

udmabuf: fix general protection fault in udmabuf_create

Syzbot reported general protection fault in udmabuf_create. The problem
was in wrong error handling.

In commit 16c243e99d33 ("udmabuf: Add support for mapping hugepages (v4)")
shmem_read_mapping_page() call was replaced with find_get_page_flags(),
but find_get_page_flags() returns NULL on failure instead PTR_ERR().

Wrong error checking was causing GPF in get_page(), since passed page
was equal to NULL. Fix it by changing if (IS_ER(!hpage)) to if (!hpage)

Reported-by: syzbot+e9cd3122a37c5d6c51e8@syzkaller.appspotmail.com
Fixes: 16c243e99d33 ("udmabuf: Add support for mapping hugepages (v4)")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210811175052.21254-1-paskripkin@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/ingenic: Use standard drm_atomic_helper_commit_tail

By making the CRTC's .vblank_enable() function return an error when it
is known that the hardware won't deliver a VBLANK, we can drop the
ingenic_drm_atomic_helper_commit_tail() function and use the standard
drm_atomic_helper_commit_tail() function instead.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-4-paul@crapouillou.net

drm/ingenic: Remove dead code

The priv->ipu_plane would get a different value further down the code,
without the first assigned value being read first; so the first
assignation can be dropped.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-2-paul@crapouillou.net

drm: IRQ midlayer is now legacy

Hide the DRM midlayer behind CONFIG_DRM_LEGACY, make functions use
the prefix drm_legacy_, and move declarations to drm_legacy.h.
In struct drm_device, move the fields irq and irq_enabled behind
CONFIG_DRM_LEGACY.

All callers have been updated.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-15-tzimmermann@suse.de

drm: Remove unused devm_drm_irq_install()

DRM IRQ helpers will become legacy. The function devm_drm_irq_install()
is unused and won't be required later.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-14-tzimmermann@suse.de

drm/vc4: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-13-tzimmermann@suse.de

drm/tilcdc: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

For most drivers, only the DRM IRQ helpers use irq_enabled from
struct drm_device. Tilcdc also uses irq_enabled to make its error
rollback work correctly. As the field will become legacy, duplicated
the state in the driver's local private structure.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-12-tzimmermann@suse.de

drm/tidss: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-11-tzimmermann@suse.de

drm/radeon: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-10-tzimmermann@suse.de

drm/mxsfb: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-9-tzimmermann@suse.de

drm/msm: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Acked-by: Rob Clark <robdclark@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-8-tzimmermann@suse.de

drm/kmb: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-7-tzimmermann@suse.de

drm/gma500: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-6-tzimmermann@suse.de