bpf: Use correct permission flag for mixed signed bounds arithmetic

[ Upstream commit 9601148392520e2e134936e76788fc2a6371e7be ]

We forbid adding unknown scalars with mixed signed bounds due to the
spectre v1 masking mitigation. Hence this also needs bypass_spec_v1
flag instead of allow_ptr_leaks.

Fixes: 2c78ee898d8f ("bpf: Implement CAP_BPF")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference

[ Upstream commit 7a2f6e69e9c1060a7a09c1f8322ccb8d942b3078 ]

Although every Beelink GS1 seems to have external 32768 Hz oscillator,
it works only on one from four tested. There are more reports of RTC
issues elsewhere, like Armbian forum.

One Beelink GS1 owner read RTC osc status register on Android which
shipped with the box. Reported value indicated problems with external
oscillator.

In order to fix RTC and related issues (HDMI-CEC and suspend/resume with
Crust) on all boards, switch to internal oscillator.

Fixes: 32507b868119 ("arm64: dts: allwinner: h6: Move ext. oscillator to board DTs")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210330184218.279738-1-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems

[ Upstream commit 3dd4ce4185df6798dcdcc3669bddb35899d7d5e1 ]

Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.

However while both boards indeed have a working CD GPIO on PF6, the
polarity is different: the SOPine modules uses a "push-pull" socket,
which has an active-high switch, while the Pine64-LTS use the more
traditional push-push socket and the common active-low switch.

Fix the polarity in the sopine.dtsi, and overwrite it in the LTS
board .dts, to make the SD card work again on systems using SOPine
modules.

Fixes: 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Ashley <contact@victorianfox.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210316144219.5973-1-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix uninitialized sr_inst

[ Upstream commit fc85dc42a38405099f97aa2af709fe9504a82508 ]

Fix uninitialized sr_inst.

Fixes: fbfa463be8dc ("ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: footbridge: fix PCI interrupt mapping

[ Upstream commit 30e3b4f256b4e366a61658c294f6a21b8626dda7 ]

Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in
pci_device_probe()"), the PCI code will call the IRQ mapping function
whenever a PCI driver is probed. If these are marked as __init, this
causes an oops if a PCI driver is loaded or bound after the kernel has
initialised.

Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9069/1: NOMMU: Fix conversion for_each_membock() to for_each_mem_range()

[ Upstream commit 45c2f70cba3a7eff34574103b2e2b901a5f771aa ]

for_each_mem_range() uses a loop variable, yet looking into code it is
not just iteration counter but more complex entity which encodes
information about memblock. Thus condition i == 0 looks fragile.
Indeed, it broke boot of R-class platforms since it never took i == 0
path (due to i was set to 1). Fix that with restoring original flag
check.

Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix warning for omap_init_time_of()

[ Upstream commit a3efe3f6d0eb64363f74af4b0e8ba6d19415cef2 ]

Fix warning: no previous prototype for 'omap_init_time_of'.

Fixes: e69b4e1a7577 ("ARM: OMAP2+: Add omap_init_time_of()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gro: ensure frag0 meets IP header alignment

commit 38ec4944b593fd90c5ef42aaaa53e66ae5769d04 upstream.

After commit 0f6925b3e8da ("virtio_net: Do not pull payload in skb->head")
Guenter Roeck reported one failure in his tests using sh architecture.

After much debugging, we have been able to spot silent unaligned accesses
in inet_gro_receive()

The issue at hand is that upper networking stacks assume their header
is word-aligned. Low level drivers are supposed to reserve NET_IP_ALIGN
bytes before the Ethernet header to make that happen.

This patch hardens skb_gro_reset_offset() to not allow frag0 fast-path
if the fragment is not properly aligned.

Some arches like x86, arm64 and powerpc do not care and define NET_IP_ALIGN
as 0, this extra check will be a NOP for them.

Note that if frag0 is not used, GRO will call pskb_may_pull()
as many times as needed to pull network and transport headers.

Fixes: 0f6925b3e8da ("virtio_net: Do not pull payload in skb->head")
Fixes: 78a478d0efd9 ("gro: Inline skb_gro_header and cache frag0 virtual address")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ch_ktls: do not send snd_una update to TCB in middle

commit e8a4155567b3c903f49cbf89b8017e9cc22c4fe4 upstream.

snd_una update should not be done when the same skb is being
sent out.chcr_short_record_handler() sends it again even
though SND_UNA update is already sent for the skb in
chcr_ktls_xmit(), which causes mismatch in un-acked
TCP seq number, later causes problem in sending out
complete record.

Fixes: 429765a149f1 ("chcr: handle partial end part of a record")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ch_ktls: tcb close causes tls connection failure

commit 21d8c25e3f4b9052a471ced8f47b531956eb9963 upstream.

HW doesn't need marking TCB closed. This TCB state change
sometimes causes problem to the new connection which gets
the same tid.

Fixes: 34aba2c45024 ("cxgb4/chcr : Register to tls add and del callback")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ch_ktls: fix device connection close

commit bc16efd2430652f894ae34b1de5eccc3bf0d2810 upstream.

When sge queue is full and chcr_ktls_xmit_wr_complete()
returns failure, skb is not freed if it is not the last tls record in
this skb, causes refcount never gets freed and tls_dev_del()
never gets called on this connection.

Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ch_ktls: Fix kernel panic

commit 1a73e427b824133940c2dd95ebe26b6dce1cbf10 upstream.

Taking page refcount is not ideal and causes kernel panic
sometimes. It's better to take tx_ctx lock for the complete
skb transmit, to avoid page cleanup if ACK received in middle.

Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: remove duplicate napi_schedule call in open function

commit 7c451f3ef676c805a4b77a743a01a5c21a250a73 upstream.

Remove the unnecessary napi_schedule() call in __ibmvnic_open() since
interrupt_rx() calls napi_schedule_prep/__napi_schedule during every
receive interrupt.

Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: remove duplicate napi_schedule call in do_reset function

commit d3a6abccbd272aea7dc2c6f984bb5a2c11278e44 upstream.

During adapter reset, do_reset/do_hard_reset calls ibmvnic_open(),
which will calls napi_schedule if previous state is VNIC_CLOSED
(i.e, the reset case, and "ifconfig down" case). So there is no need
for do_reset to call napi_schedule again at the end of the function
though napi_schedule will neglect the request if napi is already
scheduled.

Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: avoid calling napi_disable() twice

commit 0775ebc4cf8554bdcd2c212669a0868ab68df5c0 upstream.

__ibmvnic_open calls napi_disable without checking whether NAPI polling
has already been disabled or not. This could cause napi_disable
being called twice, which could generate deadlock. For example,
the first napi_disable will spin until NAPI_STATE_SCHED is cleared
by napi_complete_done, then set it again.
When napi_disable is called the second time, it will loop infinitely
because no dev->poll will be running to clear NAPI_STATE_SCHED.

To prevent above scenario from happening, call ibmvnic_napi_disable()
which checks if napi is disabled or not before calling napi_disable.

Fixes: bfc32f297337 ("ibmvnic: Move resource initialization to its own routine")
Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64: tools: remove inclusion of ia64-specific version of errno.h header

commit 17786fea414393813b56e33a1a01b2dfa03c0915 upstream.

There is no longer an ia64-specific version of the errno.h header below
arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with:

    CC       /usr/src/linux/tools/bpf/bpftool/btf_dumper.o
  In file included from /usr/src/linux/tools/include/linux/err.h:8,
                   from btf_dumper.c:11:
  /usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory
     13 | #include "../../../arch/ia64/include/uapi/asm/errno.h"
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  compilation terminated.

Thus, just remove the inclusion of the ia64-specific errno.h so that the
build will use the generic errno.h header on this target which was used
there anyway as the ia64-specific errno.h was just a wrapper for the
generic header.

Fixes: c25f867ddd00 ("ia64: remove unneeded uapi asm-generic wrappers")
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64: remove duplicate entries in generic_defconfig

commit 19d000d93303e05bd7b1326e3de9df05a41b25b5 upstream.

Fix ia64 generic_defconfig duplicate entries, as warned by:

  arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA:  => 58
  arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA_PIIX:  => 59

These 2 symbols still have the same value as in the removed lines.

Link: https://lkml.kernel.org/r/20210411020255.18052-1-rdunlap@infradead.org
Fixes: c331649e6371 ("ia64: Use libata instead of the legacy ide driver in defconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethtool: pause: make sure we init driver stats

commit 16756d3e77ad58cd07e36cbed724aa13ae5a0278 upstream.

The intention was for pause statistics to not be reported
when driver does not have the relevant callback (only
report an empty netlink nest). What happens currently
we report all 0s instead. Make sure statistics are
initialized to "not set" (which is -1) so the dumping
code skips them.

Fixes: 9a27a33027f2 ("ethtool: add standard pause stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: fix the panic when running bpf in xdpdrv mode

commit 4e39a072a6a0fc422ba7da5e4336bdc295d70211 upstream.

Fix this panic by adding more rules to calculate the value of @rss_size_max
which could be used in allocating the queues when bpf is loaded, which,
however, could cause the failure and then trigger the NULL pointer of
vsi->rx_rings. Prio to this fix, the machine doesn't care about how many
cpus are online and then allocates 256 queues on the machine with 32 cpus
online actually.

Once the load of bpf begins, the log will go like this "failed to get
tracking for 256 queues for VSI 0 err -12" and this "setup of MAIN VSI
failed".

Thus, I attach the key information of the crash-log here.

BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
RIP: 0010:i40e_xdp+0xdd/0x1b0 [i40e]
Call Trace:
[2160294.717292]  ? i40e_reconfig_rss_queues+0x170/0x170 [i40e]
[2160294.717666]  dev_xdp_install+0x4f/0x70
[2160294.718036]  dev_change_xdp_fd+0x11f/0x230
[2160294.718380]  ? dev_disable_lro+0xe0/0xe0
[2160294.718705]  do_setlink+0xac7/0xe70
[2160294.719035]  ? __nla_parse+0xed/0x120
[2160294.719365]  rtnl_newlink+0x73b/0x860

Fixes: 41c445ff0f48 ("i40e: main driver core")
Co-developed-by: Shujin Li <lishujin@kuaishou.com>
Signed-off-by: Shujin Li <lishujin@kuaishou.com>
Signed-off-by: Jason Xing <xingwanli@kuaishou.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Make tcp_allowed_congestion_control readonly in non-init netns

commit 97684f0970f6e112926de631fdd98d9693c7e5c1 upstream.

Currently, tcp_allowed_congestion_control is global and writable;
writing to it in any net namespace will leak into all other net
namespaces.

tcp_available_congestion_control and tcp_allowed_congestion_control are
the only sysctls in ipv4_net_table (the per-netns sysctl table) with a
NULL data pointer; their handlers (proc_tcp_available_congestion_control
and proc_allowed_congestion_control) have no other way of referencing a
struct net. Thus, they operate globally.

Because ipv4_net_table does not use designated initializers, there is no
easy way to fix up this one "bad" table entry. However, the data pointer
updating logic shouldn't be applied to NULL pointers anyway, so we
instead force these entries to be read-only.

These sysctls used to exist in ipv4_table (init-net only), but they were
moved to the per-net ipv4_net_table, presumably without realizing that
tcp_allowed_congestion_control was writable and thus introduced a leak.

Because the intent of that commit was only to know (i.e. read) "which
congestion algorithms are available or allowed", this read-only solution
should be sufficient.

The logic added in recent commit
31c4d2f160eb: ("net: Ensure net namespace isolation of sysctls")
does not and cannot check for NULL data pointers, because
other table entries (e.g. /proc/sys/net/netfilter/nf_log/) have
.data=NULL but use other methods (.extra2) to access the struct net.

Fixes: 9cb8e048e5d9 ("net/ipv4/sysctl: show tcp_{allowed, available}_congestion_control in non-initial netns")
Signed-off-by: Jonathon Reinhart <jonathon.reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: ptdump: fix build failure

commit 458376913d86bed2fb781b4952eb6861675ef3be upstream.

READ_ONCE() cannot be used for reading PTEs.  Use ptep_get() instead, to
avoid the following errors:

    CC      mm/ptdump.o
  In file included from <command-line>:
  mm/ptdump.c: In function 'ptdump_pte_entry':
  include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_207' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
    320 |  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |                                      ^
  include/linux/compiler_types.h:301:4: note: in definition of macro '__compiletime_assert'
    301 |    prefix ## suffix();    \
        |    ^~~~~~
  include/linux/compiler_types.h:320:2: note: in expansion of macro '_compiletime_assert'
    320 |  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |  ^~~~~~~~~~~~~~~~~~~
  include/asm-generic/rwonce.h:36:2: note: in expansion of macro 'compiletime_assert'
     36 |  compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
        |  ^~~~~~~~~~~~~~~~~~
  include/asm-generic/rwonce.h:49:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
     49 |  compiletime_assert_rwonce_type(x);    \
        |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/ptdump.c:114:14: note: in expansion of macro 'READ_ONCE'
    114 |  pte_t val = READ_ONCE(*pte);
        |              ^~~~~~~~~
  make[2]: *** [mm/ptdump.o] Error 1

See commit 481e980a7c19 ("mm: Allow arches to provide ptep_get()") and
commit c0e1c8c22beb ("powerpc/8xx: Provide ptep_get() with 16k pages")
for details.

Link: https://lkml.kernel.org/r/912b349e2bcaa88939904815ca0af945740c6bd4.1618478922.git.christophe.leroy@csgroup.eu
Fixes: 30d621f6723b ("mm: add generic ptdump")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ip6_tunnel: Unregister catch-all devices

commit 941ea91e87a6e879ed82dad4949f6234f2702bec upstream.

Similarly to the sit case, we need to remove the tunnels with no
addresses that have been moved to another network namespace.

Fixes: 0bd8762824e73 ("ip6tnl: add x-netns support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sit: Unregister catch-all devices

commit 610f8c0fc8d46e0933955ce13af3d64484a4630a upstream.

A sit interface created without a local or a remote address is linked
into the `sit_net::tunnels_wc` list of its original namespace. When
deleting a network namespace, delete the devices that have been moved.

The following script triggers a null pointer dereference if devices
linked in a deleted `sit_net` remain:

    for i in `seq 1 30`; do
        ip netns add ns-test
        ip netns exec ns-test ip link add dev veth0 type veth peer veth1
        ip netns exec ns-test ip link add dev sit$i type sit dev veth0
        ip netns exec ns-test ip link set dev sit$i netns $$
        ip netns del ns-test
    done
    for i in `seq 1 30`; do
        ip link del dev sit$i
    done

Fixes: 5e6700b3bf98f ("sit: add support of x-netns")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: davicom: Fix regulator not turned off on failed probe

commit 31457db3750c0b0ed229d836f2609fdb8a5b790e upstream.

When the probe fails, we must disable the regulator that was previously
enabled.

This patch is a follow-up to commit ac88c531a5b3
("net: davicom: Fix regulator not turned off on failed probe") which missed
one case.

Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix setting of RS FEC mode

commit 7a320c9db3e73fb6c4f9a331087df9df18767221 upstream.

Change register setting from bit number to bit mask.

Fixes: b5ede32d3329 ("net/mlx5e: Add support for FEC modes based on 50G per lane links")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_limit: avoid possible divide error in nft_limit_init

commit b895bdf5d643b6feb7c60856326dd4feb6981560 upstream.

div_u64() divides u64 by u32.

nft_limit_init() wants to divide u64 by u64, use the appropriate
math function (div64_u64)

divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8390 Comm: syz-executor188 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:div_u64_rem include/linux/math64.h:28 [inline]
RIP: 0010:div_u64 include/linux/math64.h:127 [inline]
RIP: 0010:nft_limit_init+0x2a2/0x5e0 net/netfilter/nft_limit.c:85
Code: ef 4c 01 eb 41 0f 92 c7 48 89 de e8 38 a5 22 fa 4d 85 ff 0f 85 97 02 00 00 e8 ea 9e 22 fa 4c 0f af f3 45 89 ed 31 d2 4c 89 f0 <49> f7 f5 49 89 c6 e8 d3 9e 22 fa 48 8d 7d 48 48 b8 00 00 00 00 00
RSP: 0018:ffffc90009447198 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000200000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff875152e6 RDI: 0000000000000003
RBP: ffff888020f80908 R08: 0000200000000000 R09: 0000000000000000
R10: ffffffff875152d8 R11: 0000000000000000 R12: ffffc90009447270
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  000000000097a300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200001c4 CR3: 0000000026a52000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 nf_tables_newexpr net/netfilter/nf_tables_api.c:2675 [inline]
 nft_expr_init+0x145/0x2d0 net/netfilter/nf_tables_api.c:2713
 nft_set_elem_expr_alloc+0x27/0x280 net/netfilter/nf_tables_api.c:5160
 nf_tables_newset+0x1997/0x3150 net/netfilter/nf_tables_api.c:4321
 nfnetlink_rcv_batch+0x85a/0x21b0 net/netfilter/nfnetlink.c:456
 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:580 [inline]
 nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:598
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: c26844eda9d4 ("netfilter: nf_tables: Fix nft limit burst handling")
Fixes: 3e0f64b7dd31 ("netfilter: nft_limit: fix packet ratelimiting")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Luigi Rizzo <lrizzo@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta

commit e3e0f9b279705154b951d579dc3d8b7041710e24 upstream.

In the nft_offload there is the mate flow_dissector with no
ingress_ifindex but with ingress_iftype that only be used
in the software. So if the mask of ingress_ifindex in meta is
0, this meta check should be bypass.

Fixes: 6d65bc64e232 ("net/mlx5e: Add mlx5e_flower_parse_meta support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: macb: fix the restore of cmp registers

commit a714e27ea8bdee2b238748029d31472d0a65b611 upstream.

Commit a14d273ba159 ("net: macb: restore cmp registers on resume path")
introduces the restore of CMP registers on resume path. In case the IP
doesn't support type 2 screeners (zero on DCFG8 register) the
struct macb::rx_fs_list::list is not initialized and thus the
list_for_each_entry(item, &bp->rx_fs_list.list, list) loop introduced in
commit a14d273ba159 ("net: macb: restore cmp registers on resume path")
will access an uninitialized list leading to crash. Thus, initialize
the struct macb::rx_fs_list::list without taking into account if the
IP supports type 2 screeners or not.

Fixes: a14d273ba159 ("net: macb: restore cmp registers on resume path")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libbpf: Fix potential NULL pointer dereference

commit afd0be7299533bb2e2b09104399d8a467ecbd2c5 upstream.

Wait until after the UMEM is checked for null to dereference it.

Fixes: 43f1bc1efff1 ("libbpf: Restore umem state after socket create failure")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210408052009.7844-1-ciara.loftus@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: arp_tables: add pre_exit hook for table unregister

commit d163a925ebbc6eb5b562b0f1d72c7e817aa75c40 upstream.

Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.

Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.

The per-net hook unregister function uses call_rcu instead.

Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: bridge: add pre_exit hooks for ebtable unregistration

commit 7ee3c61dcd28bf6e290e06ad382f13511dc790e9 upstream.

Just like ip/ip6/arptables, the hooks have to be removed, then
synchronize_rcu() has to be called to make sure no more packets are being
processed before the ruleset data is released.

Place the hook unregistration in the pre_exit hook, then call the new
ebtables pre_exit function from there.

Years ago, when first netns support got added for netfilter+ebtables,
this used an older (now removed) netfilter hook unregister API, that did
a unconditional synchronize_rcu().

Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit
handlers may free the ebtable ruleset while packets are still in flight.

This can only happens on module removal, not during netns exit.

The new function expects the table name, not the table struct.

This is because upcoming patch set (targeting -next) will remove all
net->xt.{nat,filter,broute}_table instances, this makes it necessary
to avoid external references to those member variables.

The existing APIs will be converted, so follow the upcoming scheme of
passing name + hook type instead.

Fixes: aee12a0a3727e ("ebtables: remove nf_hook_register usage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC

commit a2948b17f6b936fc52f86c0f92c46d2f91928b79 upstream.

In case a platform doesn't provide explicit flush-hints but provides an
explicit flush callback via ND_REGION_ASYNC region flag, then
nvdimm_has_flush() still returns '0' indicating that writes do not
require flushing. This happens on PPC64 with patch at [1] applied, where
'deep_flush' of a region was denied even though an explicit flush
function was provided.

Fix this by adding a condition to nvdimm_has_flush() to test for the
ND_REGION_ASYNC flag on the region and see if a 'region->flush' callback
is assigned.

Link: http://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87
Fixes: c5d4355d10d4 ("libnvdimm: nd_region flush callback support")
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Link: https://lore.kernel.org/r/20210402092555.208590-1-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: Fix potential infinite loop when using u8 loop counter

commit ef963ae427aa4669905e0a96b3bd9d44dc85db32 upstream.

A for-loop is using a u8 loop counter that is being compared to
a u32 cmp_dcbcfg->numapp to check for the end of the loop. If
cmp_dcbcfg->numapp is larger than 255 then the counter j will wrap
around to zero and hence an infinite loop occurs. Fix this by making
counter j the same type as cmp_dcbcfg->numapp.

Addresses-Coverity: ("Infinite loop")
Fixes: aeac8ce864d9 ("ice: Recognize 860 as iSCSI port in CEE mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: conntrack: do not print icmpv6 as unknown via /proc

commit fbea31808ca124dd73ff6bb1e67c9af4607c3e32 upstream.

/proc/net/nf_conntrack shows icmpv6 as unknown.

Fixes: 09ec82f5af99 ("netfilter: conntrack: remove protocol name from l4proto struct")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: flowtable: fix NAT IPv6 offload mangling

commit 0e07e25b481aa021e4b48085ecb8a049e9614510 upstream.

Fix out-of-bound access in the address array.

Fixes: 5c27d8d76ce8 ("netfilter: nf_flow_table_offload: add IPv6 support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: fix unbalanced device enable/disable in suspend/resume

commit debb9df311582c83fe369baa35fa4b92e8a9c58a upstream.

pci_disable_device() called in __ixgbe_shutdown() decreases
dev->enable_cnt by 1. pci_enable_device_mem() which increases
dev->enable_cnt by 1, was removed from ixgbe_resume() in commit
6f82b2558735 ("ixgbe: use generic power management"). This caused
unbalanced increase/decrease. So add pci_enable_device_mem() back.

Fix the following call trace.

  ixgbe 0000:17:00.1: disabling already-disabled device
  Call Trace:
   __ixgbe_shutdown+0x10a/0x1e0 [ixgbe]
   ixgbe_suspend+0x32/0x70 [ixgbe]
   pci_pm_suspend+0x87/0x160
   ? pci_pm_freeze+0xd0/0xd0
   dpm_run_callback+0x42/0x170
   __device_suspend+0x114/0x460
   async_suspend+0x1f/0xa0
   async_run_entry_fn+0x3c/0xf0
   process_one_work+0x1dd/0x410
   worker_thread+0x34/0x3f0
   ? cancel_delayed_work+0x90/0x90
   kthread+0x14c/0x170
   ? kthread_park+0x90/0x90
   ret_from_fork+0x1f/0x30

Fixes: 6f82b2558735 ("ixgbe: use generic power management")
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: Reset num_scatter if libata marks qc as NODATA

commit 176ddd89171ddcf661862d90c5d257877f7326d6 upstream.

When the cache_type for the SCSI device is changed, the SCSI layer issues a
MODE_SELECT command. The caching mode details are communicated via a
request buffer associated with the SCSI command with data direction set as
DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata
layer, as a part of generic initial setup, libata layer sets up the
scatterlist for the command using the SCSI command (ata_scsi_qc_new()).
This command is then translated by the libata layer into
ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats
this as a non-data command (ata_mselect_caching()), since it only needs an
ATA taskfile to pass the caching on/off information to the device. It does
not need the scatterlist that has been setup, so it does not perform
dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this
command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it
as a non-data command with a scatterlist. It cannot extract the correct DMA
length since the scatterlist has not been mapped with dma_map_sg() for a
DMA operation. When this partially constructed SAS task reaches pm80xx
LLDD, it results in the following warning:

"pm80xx_chip_sata_req 6058: The sg list address
start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff
end_addr_low=0xffffffff has crossed 4G boundary"

Update libsas to handle ATA non-data commands separately so num_scatter and
total_xfer_len remain 0.

Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com
Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA")
Tested-by: Luo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jolly Shah <jollys@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Fix spelling mistake "SPARSEMEM" to "SPARSMEM"

commit 199fc6b8dee7d6d50467a57e0dc7e3e1b7d59966 upstream.

There is a spelling mistake when SPARSEMEM Kconfig copy.

Fixes: a5406a7ff56e ("riscv: Correct SPARSEMEM configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio/pci: Add missing range check in vfio_pci_mmap

commit 909290786ea335366e21d7f1ed5812b90f2f0a92 upstream.

When mmaping an extra device region verify that the region index
derived from the mmap offset is valid.

Fixes: a15b1883fee1 ("vfio_pci: Allow mapping extra regions")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Message-Id: <20210412214124.GA241759@lisa.in-ulm.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: alternatives: Move length validation in alternative_{insn, endif}

commit 22315a2296f4c251fa92aec45fbbae37e9301b6c upstream.

After commit 2decad92f473 ("arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is
set atomically"), LLVM's integrated assembler fails to build entry.S:

<instantiation>:5:7: error: expected assembly-time absolute expression
 .org . - (664b-663b) + (662b-661b)
      ^
<instantiation>:6:7: error: expected assembly-time absolute expression
 .org . - (662b-661b) + (664b-663b)
      ^

The root cause is LLVM's assembler has a one-pass design, meaning it
cannot figure out these instruction lengths when the .org directive is
outside of the subsection that they are in, which was changed by the
.arch_extension directive added in the above commit.

Apply the same fix from commit 966a0acce2fc ("arm64/alternatives: move
length validation inside the subsection") to the alternative_endif
macro, shuffling the .org directives so that the length validation
happen will always happen in the same subsections. alternative_insn has
not shown any issue yet but it appears that it could have the same issue
in the future so just preemptively change it.

Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences")
Cc: <stable@vger.kernel.org> # 5.8.x
Link: https://github.com/ClangBuiltLinux/linux/issues/1347
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210414000803.662534-1-nathan@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: fix inline asm in load_unaligned_zeropad()

commit 185f2e5f51c2029efd9dd26cceb968a44fe053c6 upstream.

The inline asm's addr operand is marked as input-only, however in
the case where an exception is taken it may be modified by the BIC
instruction on the exception path. Fix the problem by using a temporary
register as the destination register for the BIC instruction.

Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: stable@vger.kernel.org
Link: https://linux-review.googlesource.com/id/I84538c8a2307d567b4f45bb20b715451005f9617
Link: https://lore.kernel.org/r/20210401165110.3952103-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

readdir: make sure to verify directory entry for legacy interfaces too

commit 0c93ac69407d63a85be0129aa55ffaec27ffebd3 upstream.

This does the directory entry name verification for the legacy
"fillonedir" (and compat) interface that goes all the way back to the
dark ages before we had a proper dirent, and the readdir() system call
returned just a single entry at a time.

Nobody should use this interface unless you still have binaries from
1991, but let's do it right.

This came up during discussions about unsafe_copy_to_user() and proper
checking of all the inputs to it, as the networking layer is looking to
use it in a few new places.  So let's make sure the _old_ users do it
all right and proper, before we add new ones.

See also commit 8a23eb804ca4 ("Make filldir[64]() verify the directory
entry filename is valid") which did the proper modern interfaces that
people actually use. It had a note:

    Note that I didn't bother adding the checks to any legacy interfaces
    that nobody uses.

which this now corrects.  Note that we really don't care about POSIX and
the presense of '/' in a directory entry, but verify_dirent_name() also
ends up doing the proper name length verification which is what the
input checking discussion was about.

[ Another option would be to remove the support for this particular very
  old interface: any binaries that use it are likely a.out binaries, and
  they will no longer run anyway since we removed a.out binftm support
  in commit eac616557050 ("x86: Deprecate a.out support").

  But I'm not sure which came first: getdents() or ELF support, so let's
  pretend somebody might still have a working binary that uses the
  legacy readdir() case.. ]

Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm verity fec: fix misaligned RS roots IO

commit 8ca7cab82bda4eb0b8064befeeeaa38106cac637 upstream.

commit df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to
block size") introduced the possibility for misaligned roots IO
relative to the underlying device's logical block size. E.g. Android's
default RS roots=2 results in dm_bufio->block_size=1024, which causes
the following EIO if the logical block size of the device is 4096,
given v->data_dev_block_bits=12:

E sd 0    : 0:0:0: [sda] tag#30 request not aligned to the logical block size
E blk_update_request: I/O error, dev sda, sector 10368424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
E device-mapper: verity-fec: 254:8: FEC 9244672: parity read failed (block 18056): -5

Fix this by onlu using f->roots for dm_bufio blocksize IFF it is
aligned to v->data_dev_block_bits.

Fixes: df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size")
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: set EV_KEY and EV_ABS only for non-HID_GENERIC type of devices

commit 276559d8d02c2709281578976ca2f53bc62063d4 upstream.

Valid HID_GENERIC type of devices set EV_KEY and EV_ABS by wacom_map_usage.
When *_input_capabilities are reached, those devices should already have
their proper EV_* set. EV_KEY and EV_ABS only need to be set for
non-HID_GENERIC type of devices in *_input_capabilities.

Devices that don't support HID descitoprs will pass back to hid-input for
registration without being accidentally rejected by the introduction of
patch: "Input: refuse to register absolute devices without absinfo"

Fixes: 6ecfe51b4082 ("Input: refuse to register absolute devices without absinfo")
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <Jason.Gerecke@wacom.com>
Tested-by: Juan Garrido <Juan.Garrido@wacom.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - fix Pegatron C15B ID entry

commit daa58c8eec0a65ac8e2e77ff3ea8a233d8eec954 upstream.

The Zenbook Flip entry that was added overwrites a previous one
because of a typo:

In file included from drivers/input/serio/i8042.h:23,
                 from drivers/input/serio/i8042.c:131:
drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init]
  591 |                 .matches = {
      |                            ^
drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches')

Add the missing separator between the two.

Fixes: b5d6e7ab7fe7 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Link: https://lore.kernel.org/r/20210323130623.2302402-1-arnd@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: s6sy761 - fix coordinate read bit shift

commit 30b3f68715595dee7fe4d9bd91a2252c3becdf0a upstream.

The touch coordinate register contains the following:

        byte 3             byte 2             byte 1
+--------+--------+ +-----------------+ +-----------------+
|        |        | |                 | |                 |
| X[3:0] | Y[3:0] | |     Y[11:4]     | |     X[11:4]     |
|        |        | |                 | |                 |
+--------+--------+ +-----------------+ +-----------------+

Bytes 2 and 1 need to be shifted left by 4 bits, the least significant
nibble of each is stored in byte 3. Currently they are only
being shifted by 3 causing the reported coordinates to be incorrect.

This matches downstream examples, and has been confirmed on my
device (OnePlus 7 Pro).

Fixes: 0145a7141e59 ("Input: add support for the Samsung S6SY761 touchscreen")
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://lore.kernel.org/r/20210305185710.225168-1-caleb@connolly.tech
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS

[ Upstream commit 7d37cb2c912dc5c25ffac784a4f9b98c06c6bd08 ]

When LATENCYTOP, LOCKDEP, or FAULT_INJECTION_STACKTRACE_FILTER is
enabled and ARCH_WANT_FRAME_POINTERS is disabled, Kbuild gives a warning
such as:

  WARNING: unmet direct dependencies detected for FRAME_POINTER
    Depends on [n]: DEBUG_KERNEL [=y] && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS [=n] || MCOUNT [=n]
    Selected by [y]:
    - LATENCYTOP [=y] && DEBUG_KERNEL [=y] && STACKTRACE_SUPPORT [=y] && PROC_FS [=y] && !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM && !ARC && !X86

Depending on ARCH_WANT_FRAME_POINTERS causes a recursive dependency
error.  ARCH_WANT_FRAME_POINTERS is to be selected by the architecture,
and is not supposed to be overridden by other config options.

Link: https://lkml.kernel.org/r/20210329165329.27994-1-julianbraha@gmail.com
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virt_wifi: Return micros for BSS TSF values

[ Upstream commit b57aa17f07c9270e576ef7df09f142978b5a75f0 ]

cfg80211_inform_bss expects to receive a TSF value, but is given the
time since boot in nanoseconds. TSF values are expected to be at
microsecond scale rather than nanosecond scale.

Signed-off-by: A. Cody Schuffelen <schuffelen@google.com>
Link: https://lore.kernel.org/r/20210318200419.1421034-1-schuffelen@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: clear sta->fast_rx when STA removed from 4-addr VLAN

[ Upstream commit dd0b45538146cb6a54d6da7663b8c3afd16ebcfd ]

In some race conditions, with more clients and traffic configuration,
below crash is seen when making the interface down. sta->fast_rx wasn't
cleared when STA gets removed from 4-addr AP_VLAN interface. The crash is
due to try accessing 4-addr AP_VLAN interface's net_device (fast_rx->dev)
which has been deleted already.

Resolve this by clearing sta->fast_rx pointer when STA removes
from a 4-addr VLAN.

[  239.449529] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[  239.449531] pgd = 80204000
...
[  239.481496] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.60 #227
[  239.481591] Hardware name: Generic DT based system
[  239.487665] task: be05b700 ti: be08e000 task.ti: be08e000
[  239.492360] PC is at get_rps_cpu+0x2d4/0x31c
[  239.497823] LR is at 0xbe08fc54
...
[  239.778574] [<80739740>] (get_rps_cpu) from [<8073cb10>] (netif_receive_skb_internal+0x8c/0xac)
[  239.786722] [<8073cb10>] (netif_receive_skb_internal) from [<8073d578>] (napi_gro_receive+0x48/0xc4)
[  239.795267] [<8073d578>] (napi_gro_receive) from [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames+0xbcc/0x12d4 [mac80211])
[  239.804776] [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames [mac80211]) from [<c7b84d4c>] (ieee80211_rx_napi+0x7b8/0x8c8 [mac8
            0211])
[  239.815857] [<c7b84d4c>] (ieee80211_rx_napi [mac80211]) from [<c7f63d7c>] (ath11k_dp_process_rx+0x7bc/0x8c8 [ath11k])
[  239.827757] [<c7f63d7c>] (ath11k_dp_process_rx [ath11k]) from [<c7f5b6c4>] (ath11k_dp_service_srng+0x2c0/0x2e0 [ath11k])
[  239.838484] [<c7f5b6c4>] (ath11k_dp_service_srng [ath11k]) from [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll+0x20/0x84 [ath11k_ahb]
            )
[  239.849419] [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll [ath11k_ahb]) from [<8073ce1c>] (net_rx_action+0xe0/0x28c)
[  239.860945] [<8073ce1c>] (net_rx_action) from [<80324868>] (__do_softirq+0xe4/0x228)
[  239.871269] [<80324868>] (__do_softirq) from [<80324c48>] (irq_exit+0x98/0x108)
[  239.879080] [<80324c48>] (irq_exit) from [<8035c59c>] (__handle_domain_irq+0x90/0xb4)
[  239.886114] [<8035c59c>] (__handle_domain_irq) from [<8030137c>] (gic_handle_irq+0x50/0x94)
[  239.894100] [<8030137c>] (gic_handle_irq) from [<803024c0>] (__irq_svc+0x40/0x74)

Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Link: https://lore.kernel.org/r/1616163532-3881-1-git-send-email-seevalam@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pcnet32: Use pci_resource_len to validate PCI resource

[ Upstream commit 66c3f05ddc538ee796321210c906b6ae6fc0792a ]

pci_resource_start() is not a good indicator to determine if a PCI
resource exists or not, since the resource may start at address 0.
This is seen when trying to instantiate the driver in qemu for riscv32
or riscv64.

pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000001f]
...
pcnet32: card has no PCI IO resources, aborting

Use pci_resouce_len() instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: forbid monitor for add llsec seclevel

[ Upstream commit 9ec87e322428d4734ac647d1a8e507434086993d ]

This patch forbids to add llsec seclevel for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-14-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: stop dump llsec seclevels for monitors

[ Upstream commit 4c9b4f55ad1f5a4b6206ac4ea58f273126d21925 ]

This patch stops dumping llsec seclevels for monitors which we don't
support yet. Otherwise we will access llsec mib which isn't initialized
for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-13-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: forbid monitor for del llsec devkey

[ Upstream commit 6fb8045319ef172dc88a8142e7f8b58c7608137e ]

This patch forbids to del llsec devkey for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-12-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: forbid monitor for add llsec devkey

[ Upstream commit a347b3b394868fef15b16f143719df56184be81d ]

This patch forbids to add llsec devkey for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-11-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: stop dump llsec devkeys for monitors

[ Upstream commit 080d1a57a94d93e70f84b7a360baa351388c574f ]

This patch stops dumping llsec devkeys for monitors which we don't support
yet. Otherwise we will access llsec mib which isn't initialized for
monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-10-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: forbid monitor for del llsec dev

[ Upstream commit ad8f9de1f3566686af35b1c6b43240726541da61 ]

This patch forbids to del llsec dev for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-9-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: forbid monitor for add llsec dev

[ Upstream commit 5303f956b05a2886ff42890908156afaec0f95ac ]

This patch forbids to add llsec dev for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-8-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: stop dump llsec devs for monitors

[ Upstream commit 5582d641e6740839c9b83efd1fbf9bcd00b6f5fc ]

This patch stops dumping llsec devs for monitors which we don't support
yet. Otherwise we will access llsec mib which isn't initialized for
monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-7-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: forbid monitor for del llsec key

[ Upstream commit b6e2949544a183f590ae6f3ef2d1aaaa2c44e38a ]

This patch forbids to del llsec key for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-6-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: forbid monitor for add llsec key

[ Upstream commit 08470c5453339369bd3d590c4cbb0b5961cdcbb6 ]

This patch forbids to add llsec key for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-5-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: stop dump llsec keys for monitors

[ Upstream commit fb3c5cdf88cd504ef11d59e8d656f4bc896c6922 ]

This patch stops dumping llsec keys for monitors which we don't support
yet. Otherwise we will access llsec mib which isn't initialized for
monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-4-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: add support for Qu with AX201 device

[ Upstream commit 97195d3cad852063208a1cd4f4d073459547a415 ]

Add this specific Samsung AX201 sku to driver so it can be
detected and initialized successfully.

Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.30b622037714.Id9fd709cf1c8261c097bbfd7453f6476077dcafc@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state

[ Upstream commit 5cd0f6f57639c5afbb36100c69281fee82c95ee7 ]

rport_dev_loss_timedout() sets the rport state to SRP_PORT_LOST and the
SCSI target state to SDEV_TRANSPORT_OFFLINE. If this races with
srp_reconnect_work(), a warning is printed:

Mar 27 18:48:07 ictm1604s01h4 kernel: dev_loss_tmo expired for SRP port-18:1 / host18.
Mar 27 18:48:07 ictm1604s01h4 kernel: ------------[ cut here ]------------
Mar 27 18:48:07 ictm1604s01h4 kernel: scsi_internal_device_block(18:0:0:100) failed: ret = -22
Mar 27 18:48:07 ictm1604s01h4 kernel: Call Trace:
Mar 27 18:48:07 ictm1604s01h4 kernel:  ? scsi_target_unblock+0x50/0x50 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel:  starget_for_each_device+0x80/0xb0 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel:  target_block+0x24/0x30 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel:  device_for_each_child+0x57/0x90
Mar 27 18:48:07 ictm1604s01h4 kernel:  srp_reconnect_rport+0xe4/0x230 [scsi_transport_srp]
Mar 27 18:48:07 ictm1604s01h4 kernel:  srp_reconnect_work+0x40/0xc0 [scsi_transport_srp]

Avoid this by not trying to block targets for rports in SRP_PORT_LOST
state.

Link: https://lore.kernel.org/r/20210401091105.8046-1-mwilck@suse.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_esai: Fix TDM slot setup for I2S mode

[ Upstream commit e7a48c710defa0e0fef54d42b7d9e4ab596e2761 ]

When using the driver in I2S TDM mode, the fsl_esai_startup()
function rewrites the number of slots previously set by the
fsl_esai_set_dai_tdm_slot() function to 2.
To fix this, let's use the saved slot count value or, if TDM
is not used and the number of slots is not set, the driver will use
the default value (2), which is set by fsl_esai_probe().

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210402081405.9892-1-shc_work@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix a5xx/a6xx timestamps

[ Upstream commit 9fbd3088351b92e8c2cef6e37a39decb12a8d5bb ]

They were reading a counter that was configured to ALWAYS_COUNT (ie.
cycles that the GPU is doing something) rather than ALWAYS_ON.  This
isn't the thing that userspace is looking for.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Message-Id: <20210325012358.1759770-2-robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: omap1: fix building with clang IAS

[ Upstream commit 28399a5a6d569c9bdb612345e4933046ca37cde5 ]

The clang integrated assembler fails to build one file with
a complex asm instruction:

arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: error: invalid instruction, any one of the following would fix this:
 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
 ^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: armv6t2
 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
 ^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: thumb2
 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
 ^

The problem is that 'NR_IRQS_LEGACY' is not defined here. Apparently
gas does not care because we first add and then subtract this number,
leading to the immediate value to be the same regardless of the
specific definition of NR_IRQS_LEGACY.

Neither the way that 'gas' just silently builds this file, nor the
way that clang IAS makes nonsensical suggestions for how to fix it
is great. Fortunately there is an easy fix, which is to #include
the header that contains the definition.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210308153430.2530616-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: keystone: fix integer overflow warning

[ Upstream commit 844b85dda2f569943e1e018fdd63b6f7d1d6f08e ]

clang warns about an impossible condition when building with 32-bit
phys_addr_t:

arch/arm/mach-keystone/keystone.c:79:16: error: result of comparison of constant 51539607551 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
            mem_end   > KEYSTONE_HIGH_PHYS_END) {
            ~~~~~~~   ^ ~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-keystone/keystone.c:78:16: error: result of comparison of constant 34359738368 with expression of type 'phys_addr_t' (aka 'unsigned int') is always true [-Werror,-Wtautological-constant-out-of-range-compare]
        if (mem_start < KEYSTONE_HIGH_PHYS_START ||
            ~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~

Change the temporary variable to a fixed-size u64 to avoid the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Link: https://lore.kernel.org/r/20210323131814.2751750-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

neighbour: Disregard DEAD dst in neigh_update

[ Upstream commit d47ec7a0a7271dda08932d6208e4ab65ab0c987c ]

After a short network outage, the dst_entry is timed out and put
in DST_OBSOLETE_DEAD. We are in this code because arp reply comes
from this neighbour after network recovers. There is a potential
race condition that dst_entry is still in DST_OBSOLETE_DEAD.
With that, another neighbour lookup causes more harm than good.

In best case all packets in arp_queue are lost. This is
counterproductive to the original goal of finding a better path
for those packets.

I observed a worst case with 4.x kernel where a dst_entry in
DST_OBSOLETE_DEAD state is associated with loopback net_device.
It leads to an ethernet header with all zero addresses.
A packet with all zero source MAC address is quite deadly with
mac80211, ath9k and 802.11 block ack.  It fails
ieee80211_find_sta_by_ifaddr in ath9k (xmit.c). Ath9k flushes tx
queue (ath_tx_complete_aggr). BAW (block ack window) is not
updated. BAW logic is damaged and ath9k transmission is disabled.

Signed-off-by: Tong Zhu <zhutong@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu/xen: Fix a use after free in xen_drm_drv_init

[ Upstream commit 52762efa2b256ed1c5274e5177cbd52ee11a2f6a ]

In function displback_changed, has the call chain
displback_connect(front_info)->xen_drm_drv_init(front_info).
We can see that drm_info is assigned to front_info->drm_info
and drm_info is freed in fail branch in xen_drm_drv_init().

Later displback_disconnect(front_info) is called and it calls
xen_drm_drv_fini(front_info) cause a use after free by
drm_info = front_info->drm_info statement.

My patch has done two things. First fixes the fail label which
drm_info = kzalloc() failed and still free the drm_info.
Second sets front_info->drm_info to NULL to avoid uaf.

Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323014656.10068-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: max98373: Added 30ms turn on/off time delay

[ Upstream commit 3a27875e91fb9c29de436199d20b33f9413aea77 ]

Amp requires 10 ~ 30ms for the power ON and OFF.
Added 30ms delay for stability.

Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-2-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: max98373: Changed amp shutdown register as volatile

[ Upstream commit a23f9099ff1541f15704e96b784d3846d2a4483d ]

0x20FF(amp global enable) register was defined as non-volatile,
but it is not. Overheating, overcurrent can cause amp shutdown
in hardware.
'regmap_write' compare register readback value before writing
to avoid same value writing. 'regmap_read' just read cache
not actual hardware value for the non-volatile register.
When amp is internally shutdown by some reason, next 'AMP ON'
command can be ignored because regmap think amp is already ON.

Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-1-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: BEET mode doesn't support fragments for inner packets

[ Upstream commit 68dc022d04eb0fd60a540e242dcb11ec1bee07e2 ]

BEET mode replaces the IP(6) Headers with new IP(6) Headers when sending
packets. However, when it's a fragment before the replacement, currently
kernel keeps the fragment flag and replace the address field then encaps
it with ESP. It would cause in RX side the fragments to get reassembled
before decapping with ESP, which is incorrect.

In Xiumei's testing, these fragments went over an xfrm interface and got
encapped with ESP in the device driver, and the traffic was broken.

I don't have a good way to fix it, but only to warn this out in dmesg.

Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()

[ Upstream commit 2800aadc18a64c96b051bcb7da8a7df7d505db3f ]

It's possible for iwl_pcie_enqueue_hcmd() to be called with hard IRQs
disabled (e.g. from LED core). We can't enable BHs in such a situation.

Turn the unconditional BH-enable/BH-disable code into
hardirq-disable/conditional-enable.

This fixes the warning below.

 WARNING: CPU: 1 PID: 1139 at kernel/softirq.c:178 __local_bh_enable_ip+0xa5/0xf0
 CPU: 1 PID: 1139 Comm: NetworkManager Not tainted 5.12.0-rc1-00004-gb4ded168af79 #7
 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017
 RIP: 0010:__local_bh_enable_ip+0xa5/0xf0
 Code: f7 69 e8 ee 23 14 00 fb 66 0f 1f 44 00 00 65 8b 05 f0 f4 f7 69 85 c0 74 3f 48 83 c4 08 5b c3 65 8b 05 9b fe f7 69 85 c0 75 8e <0f> 0b eb 8a 48 89 3c 24 e8 4e 20 14 00 48 8b 3c 24 eb 91 e8 13 4e
 RSP: 0018:ffffafd580b13298 EFLAGS: 00010046
 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000
 RDX: 0000000000000003 RSI: 0000000000000201 RDI: ffffffffc1272389
 RBP: ffff96517ae4c018 R08: 0000000000000001 R09: 0000000000000000
 R10: ffffafd580b13178 R11: 0000000000000001 R12: ffff96517b060000
 R13: 0000000000000000 R14: ffffffff80000000 R15: 0000000000000001
 FS:  00007fc604ebefc0(0000) GS:ffff965267480000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055fb3fef13b2 CR3: 0000000109112004 CR4: 00000000003706e0
 Call Trace:
  ? _raw_spin_unlock_bh+0x1f/0x30
  iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi]
  iwl_trans_txq_send_hcmd+0x6c/0x430 [iwlwifi]
  iwl_trans_send_cmd+0x88/0x170 [iwlwifi]
  ? lock_acquire+0x277/0x3d0
  iwl_mvm_send_cmd+0x32/0x80 [iwlmvm]
  iwl_mvm_led_set+0xc2/0xe0 [iwlmvm]
  ? led_trigger_event+0x46/0x70
  led_trigger_event+0x46/0x70
  ieee80211_do_open+0x5c5/0xa20 [mac80211]
  ieee80211_open+0x67/0x90 [mac80211]
  __dev_open+0xd4/0x150
  __dev_change_flags+0x19e/0x1f0
  dev_change_flags+0x23/0x60
  do_setlink+0x30d/0x1230
  ? lock_is_held_type+0xb4/0x120
  ? __nla_validate_parse.part.7+0x57/0xcb0
  ? __lock_acquire+0x2e1/0x1a50
  __rtnl_newlink+0x560/0x910
  ? __lock_acquire+0x2e1/0x1a50
  ? __lock_acquire+0x2e1/0x1a50
  ? lock_acquire+0x277/0x3d0
  ? sock_def_readable+0x5/0x290
  ? lock_is_held_type+0xb4/0x120
  ? find_held_lock+0x2d/0x90
  ? sock_def_readable+0xb3/0x290
  ? lock_release+0x166/0x2a0
  ? lock_is_held_type+0x90/0x120
  rtnl_newlink+0x47/0x70
  rtnetlink_rcv_msg+0x25c/0x470
  ? netlink_deliver_tap+0x97/0x3e0
  ? validate_linkmsg+0x350/0x350
  netlink_rcv_skb+0x50/0x100
  netlink_unicast+0x1b2/0x280
  netlink_sendmsg+0x336/0x450
  sock_sendmsg+0x5b/0x60
  ____sys_sendmsg+0x1ed/0x250
  ? copy_msghdr_from_user+0x5c/0x90
  ___sys_sendmsg+0x88/0xd0
  ? lock_is_held_type+0xb4/0x120
  ? find_held_lock+0x2d/0x90
  ? lock_release+0x166/0x2a0
  ? __fget_files+0xfe/0x1d0
  ? __sys_sendmsg+0x5e/0xa0
  __sys_sendmsg+0x5e/0xa0
  ? lockdep_hardirqs_on_prepare+0xd9/0x170
  do_syscall_64+0x33/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7fc605c9572d
 Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 da ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 2e ef ff ff 48
 RSP: 002b:00007fffc83789f0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 000055ef468570c0 RCX: 00007fc605c9572d
 RDX: 0000000000000000 RSI: 00007fffc8378a30 RDI: 000000000000000c
 RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
 R13: 00007fffc8378b80 R14: 00007fffc8378b7c R15: 0000000000000000
 irq event stamp: 170785
 hardirqs last  enabled at (170783): [<ffffffff9609a8c2>] __local_bh_enable_ip+0x82/0xf0
 hardirqs last disabled at (170784): [<ffffffff96a8613d>] _raw_read_lock_irqsave+0x8d/0x90
 softirqs last  enabled at (170782): [<ffffffffc1272389>] iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi]
 softirqs last disabled at (170785): [<ffffffffc1271ec6>] iwl_pcie_enqueue_hcmd+0x116/0xa00 [iwlwifi]

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc3
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021125430.12405@cbobk.fhfr.pm
Signed-off-by: Sasha Levin <sashal@kernel.org>

arc: kernel: Return -EFAULT if copy_to_user() fails

[ Upstream commit 46e152186cd89d940b26726fff11eb3f4935b45a ]

The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return -EFAULT if the copy doesn't complete.

Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lockdep: Add a missing initialization hint to the "INFO: Trying to register non-static key" message

[ Upstream commit 3a85969e9d912d5dd85362ee37b5f81266e00e77 ]

Since this message is printed when dynamically allocated spinlocks (e.g.
kzalloc()) are used without initialization (e.g. spin_lock_init()),
suggest to developers to check whether initialization functions for objects
were called, before making developers wonder what annotation is missing.

[ mingo: Minor tweaks to the message. ]

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210321064913.4619-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix moving mmc devices with aliases for omap4 & 5

[ Upstream commit 77335a040178a0456d4eabc8bf17a7ca3ee4a327 ]

Fix moving mmc devices with dts aliases as discussed on the lists.
Without this we now have internal eMMC mmc1 show up as mmc2 compared
to the earlier order of devices.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race

[ Upstream commit 140a776833957539c84301dbdb4c3013876de118 ]

We have a duplicate legacy clock defined for sha2md5_fck that can
sometimes race with clk_disable() with the dts configured clock
for OMAP4_SHA2MD5_CLKCTRL when unused clocks are disabled during
boot causing an "Unhandled fault: imprecise external abort".

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: x86: Call acpi_boot_table_init() after acpi_table_upgrade()

[ Upstream commit 6998a8800d73116187aad542391ce3b2dd0f9e30 ]

Commit 1a1c130ab757 ("ACPI: tables: x86: Reserve memory occupied by
ACPI tables") attempted to address an issue with reserving the memory
occupied by ACPI tables, but it broke the initrd-based table override
mechanism relied on by multiple users.

To restore the initrd-based ACPI table override functionality, move
the acpi_boot_table_init() invocation in setup_arch() on x86 after
the acpi_table_upgrade() one.

Fixes: 1a1c130ab757 ("ACPI: tables: x86: Reserve memory occupied by ACPI tables")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: fix wq cleanup of WQCFG registers

[ Upstream commit ea9aadc06a9f10ad20a90edc0a484f1147d88a7a ]

A pre-release silicon erratum workaround where wq reset does not clear
WQCFG registers was leaked into upstream code. Use wq reset command
instead of blasting the MMIO region. This also address an issue where
we clobber registers in future devices.

Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling")
Reported-by: Shreenivaas Devarajan <shreenivaas.devarajan@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161824330020.881560.16375921906426627033.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: plx_dma: add a missing put_device() on error path

[ Upstream commit 07503e6aefe4a6efd777062191944a14f03b3a18 ]

Add a missing put_device(&pdev->dev) if the call to
dma_async_device_register(dma); fails.

Fixes: 905ca51e63be ("dmaengine: plx-dma: Introduce PLX DMA engine PCI driver skeleton")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/YFnq/0IQzixtAbC1@mwanda
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: Fix a double free in dma_async_device_register

[ Upstream commit ea45b6008f8095db0cc09ad6e03c7785c2986197 ]

In the first list_for_each_entry() macro of dma_async_device_register,
it gets the chan from list and calls __dma_async_device_channel_register
(..,chan). We can see that chan->local is allocated by alloc_percpu() and
it is freed chan->local by free_percpu(chan->local) when
__dma_async_device_channel_register() failed.

But after __dma_async_device_channel_register() failed, the caller will
goto err_out and freed the chan->local in the second time by free_percpu().

The cause of this problem is forget to set chan->local to NULL when
chan->local was freed in __dma_async_device_channel_register(). My
patch sets chan->local to NULL when the callee failed to avoid double free.

Fixes: d2fb0a0438384 ("dmaengine: break out channel registration")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210331014458.3944-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: dw: Make it dependent to HAS_IOMEM

[ Upstream commit 88cd1d6191b13689094310c2405394e4ce36d061 ]

Some architectures do not provide devm_*() APIs. Hence make the driver
dependent on HAVE_IOMEM.

Fixes: dbde5c2934d1 ("dw_dmac: use devm_* functions to simplify code")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210324141757.24710-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: fix wq size store permission state

[ Upstream commit 0fff71c5a311e1264988179f7dcc217fda15fadd ]

WQ size can only be changed when the device is disabled. Current code
allows change when device is enabled but wq is disabled. Change the check
to detect device state.

Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161782558755.107710.18138252584838406025.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: fix opcap sysfs attribute output

[ Upstream commit ea6a5735d2a61b938a302eb3629272342a9e7c46 ]

The operation capability register is 256bits. The current output only
prints out the first 64bits. Fix to output the entire 256bits. The current
code omits operation caps from IAX devices.

Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Reported-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161645624963.2003736.829798666998490151.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: fix delta_rec and crc size field for completion record

[ Upstream commit 4ac823e9cd85f66da274c951d21bf9f6b714b729 ]

The delta_rec_size and crc_val in the completion record should
be 32bits and not 16bits.

Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Reported-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161645618572.2003490.14466173451736323035.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback

[ Upstream commit ea941ac294d75d0ace50797aebf0056f6f8f7a7f ]

Current code blindly writes over the SWERR and the OVERFLOW bits. Write
back the bits actually read instead so the driver avoids clobbering the
OVERFLOW bit that comes after the register is read.

Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161352082229.3511254.1002151220537623503.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: sysfs: Obey valid_mask

[ Upstream commit 23cf00ddd2e1aacf1873e43f5e0c519c120daf7a ]

Do not allow exporting GPIOs which are set invalid
by the driver's valid mask.

Fixes: 726cb3ba4969 ("gpiolib: Support 'gpio-reserved-ranges' property")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: nspire-keypad - enable interrupts only when opened

[ Upstream commit 69d5ff3e9e51e23d5d81bf48480aa5671be67a71 ]

The driver registers an interrupt handler in _probe, but didn't configure
them until later when the _open function is called. In between, the keypad
can fire an IRQ due to touchpad activity, which the handler ignores. This
causes the kernel to disable the interrupt, blocking the keypad from
working.

Fix this by disabling interrupts before registering the handler.
Additionally, disable them in _close, so that they're only enabled while
open.

Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: mtk: Fix WAITRDY break condition and timeout

[ Upstream commit 2fb164f0ce95e504e2688b4f984893c29ebd19ab ]

This fixes NAND_OP_WAITRDY_INSTR operation in the driver. Without this
change the driver waits till the system is busy, but we should wait till
the busy flag is cleared. The readl_poll_timeout() function gets a break
condition, not a wait condition.

In addition fix the timeout. The timeout_ms is given in ms, but the
readl_poll_timeout() function takes the timeout in us. Multiple the
given timeout by 1000 to convert it.

Without this change, the driver does not work at all, it doesn't even
identify the NAND chip.

Fixes: 5197360f9e09 ("mtd: rawnand: mtk: Convert the driver to exec_op()")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210309000107.1368404-1-hauke@hauke-m.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sctp: fix race condition in sctp_destroy_sock

commit b166a20b07382b8bc1dcee2a448715c9c2c81b5b upstream.

If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock
held and sp->do_auto_asconf is true, then an element is removed
from the auto_asconf_splist without any proper locking.

This can happen in the following functions:
1. In sctp_accept, if sctp_sock_migrate fails.
2. In inet_create or inet6_create, if there is a bpf program
   attached to BPF_CGROUP_INET_SOCK_CREATE which denies
   creation of the sctp socket.

The bug is fixed by acquiring addr_wq_lock in sctp_destroy_sock
instead of sctp_close.

This addresses CVE-2021-23133.

Reported-by: Or Cohen <orcohen@paloaltonetworks.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.31

Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Andrei Rabusov <a.rabusov@tum.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210415144413.165663182@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/events: fix setting irq affinity

The backport of upstream patch 25da4618af240fbec61 ("xen/events: don't
unmask an event channel when an eoi is pending") introduced a
regression for stable kernels 5.10 and older: setting IRQ affinity for
IRQs related to interdomain events would no longer work, as moving the
IRQ to its new cpu was not included in the irq_ack callback for those
events.

Fix that by adding the needed call.

Note that kernels 5.11 and later don't need the explicit moving of the
IRQ to the target cpu in the irq_ack callback, due to a rework of the
affinity setting in kernel 5.11.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sfp: cope with SFPs that set both LOS normal and LOS inverted

commit 624407d2cf14ff58e53bf4b2af9595c4f21d606e upstream.

The SFP MSA defines two option bits in byte 65 to indicate how the
Rx_LOS signal on SFP pin 8 behaves:

bit 2 - Loss of Signal implemented, signal inverted from standard
        definition in SFP MSA (often called "Signal Detect").
bit 1 - Loss of Signal implemented, signal as defined in SFP MSA
        (often called "Rx_LOS").

Clearly, setting both bits results in a meaningless situation: it would
mean that LOS is implemented in both the normal sense (1 = signal loss)
and inverted sense (0 = signal loss).

Unfortunately, there are modules out there which set both bits, which
will be initially interpret as "inverted" sense, and then, if the LOS
signal changes state, we will toggle between LINK_UP and WAIT_LOS
states.

Change our LOS handling to give well defined behaviour: only interpret
these bits as meaningful if exactly one is set, otherwise treat it as
if LOS is not implemented.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1kyYQa-0004iR-CU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sfp: relax bitrate-derived mode check

commit 7a77233ec6d114322e2c4f71b4e26dbecd9ea8a7 upstream.

Do not check the encoding when deriving 1000BASE-X from the bitrate
when no other modes are discovered. Some GPON modules (VSOL V2801F
and CarlitoxxPro CPGOS03-0490 v2.0) indicate NRZ encoding with a
1200Mbaud bitrate, but should be driven with 1000BASE-X on the host
side.

Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches

commit 77d02bd00cea9f1a87afe58113fa75b983d6c23a upstream.

Noticed on a debian:experimental mips and mipsel cross build build
environment:

  perfbuilder@ec265a086e9b:~$ mips-linux-gnu-gcc --version | head -1
  mips-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224
  perfbuilder@ec265a086e9b:~$

    CC       /tmp/build/perf/util/map.o
  util/map.c: In function 'map__new':
  util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=]
    109 |    "%s/platforms/%s/arch-%s/usr/lib/%s",
        |     ^~
  In file included from /usr/mips-linux-gnu/include/stdio.h:867,
                   from util/symbol.h:11,
                   from util/map.c:2:
  /usr/mips-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096
     67 |   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     68 |        __bos (__s), __fmt, __va_arg_pack ());
        |        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Since we have the lenghts for what lands in that place, use it to give
the compiler more info and make it happy.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: fix compat match/target pad out-of-bound write

commit b29c457a6511435960115c0f548c4360d5f4801d upstream.

xt_compat_match/target_from_user doesn't check that zeroing the area
to start of next rule won't write past end of allocated ruleset blob.

Remove this code and zero the entire blob beforehand.

Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com
Reported-by: Andy Nguyen <theflow@google.com>
Fixes: 9fa492cdc160c ("[NETFILTER]: x_tables: simplify compat API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: don't ignore REQ_NOWAIT for direct IO

[ Upstream commit f8b78caf21d5bc3fcfc40c18898f9d52ed1451a5 ]

If IOCB_NOWAIT is set on submission, then that needs to get propagated to
REQ_NOWAIT on the block side. Otherwise we completely lose this
information, and any issuer of IOCB_NOWAIT IO will potentially end up
blocking on eg request allocation on the storage side.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv,entry: fix misaligned base for excp_vect_table

[ Upstream commit ac8d0b901f0033b783156ab2dc1a0e73ec42409b ]

In RV64, the size of each entry in excp_vect_table is 8 bytes. If the
base of the table is not 8-byte aligned, loading an entry in the table
will raise a misaligned exception. Although such exception will be
handled by opensbi/bbl, this still causes performance degradation.

Signed-off-by: Zihao Yu <yuzihao@ict.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: don't mark S_ISBLK async work as unbounded

[ Upstream commit 4b982bd0f383db9132e892c0c5144117359a6289 ]

S_ISBLK is marked as unbounded work for async preparation, because it
doesn't match S_ISREG. That is incorrect, as any read/write to a block
device is also a bounded operation. Fix it up and ensure that S_ISBLK
isn't marked unbounded.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

null_blk: fix command timeout completion handling

[ Upstream commit de3510e52b0a398261271455562458003b8eea62 ]

Memory backed or zoned null block devices may generate actual request
timeout errors due to the submission path being blocked on memory
allocation or zone locking. Unlike fake timeouts or injected timeouts,
the request submission path will call blk_mq_complete_request() or
blk_mq_end_request() for these real timeout errors, causing a double
completion and use after free situation as the block layer timeout
handler executes blk_mq_rq_timed_out() and __blk_mq_free_request() in
blk_mq_check_expired(). This problem often triggers a NULL pointer
dereference such as:

BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:blk_mq_sched_mark_restart_hctx+0x5/0x20
...
Call Trace:
  dd_finish_request+0x56/0x80
  blk_mq_free_request+0x37/0x130
  null_handle_cmd+0xbf/0x250 [null_blk]
  ? null_queue_rq+0x67/0xd0 [null_blk]
  blk_mq_dispatch_rq_list+0x122/0x850
  __blk_mq_do_dispatch_sched+0xbb/0x2c0
  __blk_mq_sched_dispatch_requests+0x13d/0x190
  blk_mq_sched_dispatch_requests+0x30/0x60
  __blk_mq_run_hw_queue+0x49/0x90
  process_one_work+0x26c/0x580
  worker_thread+0x55/0x3c0
  ? process_one_work+0x580/0x580
  kthread+0x134/0x150
  ? kthread_create_worker_on_cpu+0x70/0x70
  ret_from_fork+0x1f/0x30

This problem very often triggers when running the full btrfs xfstests
on a memory-backed zoned null block device in a VM with limited amount
of memory.

Avoid this by executing blk_mq_complete_request() in null_timeout_rq()
only for commands that are marked for a fake timeout completion using
the fake_timeout boolean in struct null_cmd. For timeout errors injected
through debugfs, the timeout handler will execute
blk_mq_complete_request()i as before. This is safe as the submission
path does not execute complete requests in this case.

In null_timeout_rq(), also make sure to set the command error field to
BLK_STS_TIMEOUT and to propagate this error through to the request
completion.

Reported-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210331225244.126426-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>