Shmulik Ladkani [Mon, 25 Jan 2016 19:34:40 +0000 (14:34 -0500)]
ide: Correct the CHS 'cyls_max' limit to be 65535
In b7eb0c9:
hw/block-common: Factor out fall back to legacy -drive cyls=...
'blkconf_geometry()' was introduced, factoring out CHS limit validation
code that was repeated in ide, scsi, virtio-blk.
The original IDE CHS limit prior b7eb0c9 was 65535,16,255 (as per ATA
CHS addressing).
However the 'cyls_max' argument passed to 'blkconf_geometry' in the
ide_dev_initfn case was accidentally set to 65536 instead of 65535.
Fix, providing the correct 'cyls_max'.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id:
1453112371-29760-1-git-send-email-shmulik.ladkani@ravellosystems.com
Signed-off-by: John Snow <jsnow@redhat.com>
Peter Maydell [Mon, 25 Jan 2016 10:42:51 +0000 (10:42 +0000)]
Merge remote-tracking branch 'remotes/lalrae/tags/mips-
20160125' into staging
MIPS patches 2016-01-25
Changes:
* fixes and includes clean-up
# gpg: Signature made Mon 25 Jan 2016 09:29:51 GMT using RSA key ID
0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
* remotes/lalrae/tags/mips-
20160125:
mips: Clean up includes
target-mips: Fix ALIGN instruction when bp=0
target-mips: silence NaNs for cvt.s.d and cvt.d.s
target-mips/cpu.h: Fix spell error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 18 Jan 2016 17:35:00 +0000 (17:35 +0000)]
mips: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Miodrag Dinic [Thu, 3 Dec 2015 15:48:57 +0000 (16:48 +0100)]
target-mips: Fix ALIGN instruction when bp=0
If executing ALIGN with shift count bp=0 within mips64 emulation,
the result of the operation should be sign extended.
Taken from the official documentation (pseudo code) :
ALIGN:
tmp_rt_hi = unsigned_word(GPR[rt]) << (8*bp)
tmp_rs_lo = unsigned_word(GPR[rs]) >> (8*(4-bp))
tmp = tmp_rt_hi || tmp_rt_lo
GPR[rd] = sign_extend.32(tmp)
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Aurelien Jarno [Sun, 6 Dec 2015 16:11:49 +0000 (17:11 +0100)]
target-mips: silence NaNs for cvt.s.d and cvt.d.s
cvt.s.d and cvt.d.s are FP operations and thus need to convert input
sNaN into corresponding qNaN. Explicitely use the floatXX_maybe_silence_nan
functions for that as the floatXX_to_floatXX functions do not do that.
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Dongxue Zhang [Wed, 25 Nov 2015 12:57:12 +0000 (20:57 +0800)]
target-mips/cpu.h: Fix spell error
CP0IntCtl_IPPC1, the last letter should be 'i', not 'one'.
Signed-off-by: Dongxue Zhang <elta.era@gmail.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Peter Maydell [Fri, 22 Jan 2016 15:19:20 +0000 (15:19 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-softfloat-
20160122' into staging
softfloat:
* drop confusing softfloat-only types
* fix return type of roundAndPackFloat16
# gpg: Signature made Fri 22 Jan 2016 15:15:17 GMT using RSA key ID
14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-softfloat-
20160122:
softfloat: fix return type of roundAndPackFloat16
fpu: Replace uint8 typedef with uint8_t
fpu: Replace int8 typedef with int8_t
fpu: Replace uint32 typedef with uint32_t
fpu: Replace int32 typedef with int32_t
fpu: Replace uint64 typedef with uint64_t
fpu: Replace int64 typedef with int64_t
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Aurelien Jarno [Fri, 22 Jan 2016 15:09:21 +0000 (15:09 +0000)]
softfloat: fix return type of roundAndPackFloat16
The roundAndPackFloat16 function should return a float16 value, not a
float32 one. Fix that.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1452700993-6570-1-git-send-email-aurelien@aurel32.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 22 Jan 2016 15:09:21 +0000 (15:09 +0000)]
fpu: Replace uint8 typedef with uint8_t
Replace the uint8 softfloat-specific typedef with uint8_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint8\b/uint8_t/g'
together with manual removal of the typedef definition and
manual fixing of more erroneous uses found via test compilation.
It turns out that the only code using this type is an accidental
use where uint8_t was intended anyway...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id:
1452603315-27030-7-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 22 Jan 2016 15:09:21 +0000 (15:09 +0000)]
fpu: Replace int8 typedef with int8_t
Replace the int8 softfloat-specific typedef with int8_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint8\b/int8_t/g'
together with manual removal of the typedef definition, and
manual undoing of various mis-hits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id:
1452603315-27030-6-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 22 Jan 2016 15:09:21 +0000 (15:09 +0000)]
fpu: Replace uint32 typedef with uint32_t
Replace the uint32 softfloat-specific typedef with uint32_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g'
together with manual removal of the typedef definition,
manual undoing of various mis-hits, and another couple of
fixes found via test compilation.
All the uses in hw/ were using the wrong type by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id:
1452603315-27030-5-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 22 Jan 2016 15:09:21 +0000 (15:09 +0000)]
fpu: Replace int32 typedef with int32_t
Replace the int32 softfloat-specific typedef with int32_t.
This change was made with
find hw include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint32\b/int32_t/g'
together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.
The uses in hw/ipmi/ should not have been using this type at all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id:
1452603315-27030-4-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 22 Jan 2016 15:09:20 +0000 (15:09 +0000)]
fpu: Replace uint64 typedef with uint64_t
Replace the uint64 softfloat-specific typedef with uint64_t.
This change was made with
find include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint64\b/uint64_t/g'
together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.
Note that the target-mips/kvm.c and target-s390x/kvm.c changes are fixing
code that should not have been using the uint64 type in the first place.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id:
1452603315-27030-3-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 22 Jan 2016 15:09:20 +0000 (15:09 +0000)]
fpu: Replace int64 typedef with int64_t
Replace the int64 softfloat-specific typedef with int64_t.
This change was made with
find include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint64\b/int64_t/g'
together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Message-id:
1452603315-27030-2-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 22 Jan 2016 14:44:12 +0000 (14:44 +0000)]
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
fprintf to error_report conversion in hw/9pfs and fsdev
# gpg: Signature made Fri 22 Jan 2016 14:23:15 GMT using DSA key ID
0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
fsdev: use error_report() instead of fprintf(stderr)
9pfs: use error_report() instead of fprintf(stderr)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Greg Kurz [Fri, 22 Jan 2016 14:12:18 +0000 (15:12 +0100)]
fsdev: use error_report() instead of fprintf(stderr)
Only fix the code that gets built into QEMU.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Greg Kurz [Fri, 22 Jan 2016 14:12:17 +0000 (15:12 +0100)]
9pfs: use error_report() instead of fprintf(stderr)
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Gerd Hoffmann [Fri, 22 Jan 2016 10:59:51 +0000 (11:59 +0100)]
seabios: fix submodule
Commit "36f96c4 target-i386: Add support to migrate vcpu's TSC rate"
updates roms/seabios, appearently by mistake. Revert this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id:
1453460391-7664-1-git-send-email-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 21 Jan 2016 17:21:08 +0000 (17:21 +0000)]
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-
20160121' into staging
Xen 2016/01/21
# gpg: Signature made Thu 21 Jan 2016 16:58:50 GMT using RSA key ID
70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-
20160121:
Xen PCI passthru: convert to realize()
Add Error **errp for xen_pt_config_init()
Add Error **errp for xen_pt_setup_vga()
Add Error **errp for xen_host_pci_device_get()
Xen: use qemu_strtoul instead of strtol
Change xen_host_pci_sysfs_path() to return void
xen-pvdevice: convert to realize()
xen-hvm: Clean up xen_ram_alloc() error handling
xen-hvm: Clean up xen_hvm_init() error handling
xenfb.c: avoid expensive loops when prod <= out_cons
MAINTAINERS: update Xen files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cao jin [Sun, 17 Jan 2016 12:13:15 +0000 (20:13 +0800)]
Xen PCI passthru: convert to realize()
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cao jin [Sun, 17 Jan 2016 12:13:14 +0000 (20:13 +0800)]
Add Error **errp for xen_pt_config_init()
To catch the error message. Also modify the caller
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cao jin [Sun, 17 Jan 2016 12:13:13 +0000 (20:13 +0800)]
Add Error **errp for xen_pt_setup_vga()
To catch the error message. Also modify the caller
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cao jin [Sun, 17 Jan 2016 12:13:12 +0000 (20:13 +0800)]
Add Error **errp for xen_host_pci_device_get()
To catch the error message. Also modify the caller
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cao jin [Sun, 17 Jan 2016 12:13:11 +0000 (20:13 +0800)]
Xen: use qemu_strtoul instead of strtol
No need to roll our own (with slightly incorrect handling of errno),
when we can use the common version.
Change signed parsing to unsigned, because what it read are values in
PCI config space, which are non-negative.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cao jin [Sun, 17 Jan 2016 12:13:10 +0000 (20:13 +0800)]
Change xen_host_pci_sysfs_path() to return void
And assert the snprintf() error, because user can do nothing in case of
snprintf() fail.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Peter Maydell [Thu, 21 Jan 2016 15:53:25 +0000 (15:53 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue, 2016-01-21
# gpg: Signature made Thu 21 Jan 2016 15:08:40 GMT using RSA key ID
984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Add PKU and and OSPKE support
target-i386: Add support to migrate vcpu's TSC rate
target-i386: Reorganize TSC rate setting code
target-i386: Fallback vcpu's TSC rate to value returned by KVM
target-i386: Add suffixes to MMReg struct fields
target-i386: Define MMREG_UNION macro
target-i386: Define MMXReg._d field
target-i386: Rename XMM_[BWLSDQ] helpers to ZMM_*
target-i386: Rename struct XMMReg to ZMMReg
target-i386: Use a _q array on MMXReg too
target-i386/ops_sse.h: Use MMX_Q macro
target-i386: Rename optimize_flags_init()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cao jin [Tue, 22 Dec 2015 02:43:16 +0000 (10:43 +0800)]
xen-pvdevice: convert to realize()
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Peter Maydell [Thu, 21 Jan 2016 15:00:39 +0000 (15:00 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20160121' into staging
target-arm queue:
* connect SPI devices in Xilinx Zynq platforms
* multiple-address-space support
* use multiple-address-space support for ARM TrustZone
* arm_gic: return correct ID registers for 11MPCore/v1/v2 GICs
* various fixes for (currently disabled) AArch64 EL2 and EL3 support
* add 'always-on' property to the virt board timer DT entry
# gpg: Signature made Thu 21 Jan 2016 14:54:56 GMT using RSA key ID
14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-
20160121: (36 commits)
target-arm: Implement FPEXC32_EL2 system register
target-arm: ignore ELR_ELx[1] for exception return to 32-bit ARM mode
target-arm: Implement remaining illegal return event checks
target-arm: Handle exception return from AArch64 to non-EL0 AArch32
target-arm: Fix wrong AArch64 entry offset for EL2/EL3 target
target-arm: Pull semihosting handling out to arm_cpu_do_interrupt()
target-arm: Use a single entry point for AArch64 and AArch32 exceptions
target-arm: Move aarch64_cpu_do_interrupt() to helper.c
target-arm: Properly support EL2 and EL3 in arm_el_is_aa64()
arm_gic: Update ID registers based on revision
hw/arm/virt: Add always-on property to the virt board timer
hw/arm/virt: add secure memory region and UART
hw/arm/virt: Wire up memory region to CPUs explicitly
target-arm: Support multiple address spaces in page table walks
target-arm: Implement cpu_get_phys_page_attrs_debug
target-arm: Implement asidx_from_attrs
target-arm: Add QOM property for Secure memory region
qom/cpu: Add MemoryRegion property
memory: Add address_space_init_shareable()
exec.c: Use correct AddressSpace in watch_mem_read and watch_mem_write
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Huaitong Han [Wed, 18 Nov 2015 02:20:15 +0000 (10:20 +0800)]
target-i386: Add PKU and and OSPKE support
Add PKU and OSPKE CPUID features, including xsave state and
migration support.
Signed-off-by: Huaitong Han <huaitong.han@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: squashed 3 patches together, edited patch description]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Haozhong Zhang [Tue, 24 Nov 2015 03:33:57 +0000 (11:33 +0800)]
target-i386: Add support to migrate vcpu's TSC rate
This patch enables migrating vcpu's TSC rate. If KVM on the
destination machine supports TSC scaling, guest programs will
observe a consistent TSC rate across the migration.
If TSC scaling is not supported on the destination machine, the
migration will not be aborted and QEMU on the destination will
not set vcpu's TSC rate to the migrated value.
If vcpu's TSC rate specified by CPU option 'tsc-freq' on the
destination machine is inconsistent with the migrated TSC rate,
the migration will be aborted.
For backwards compatibility, the migration of vcpu's TSC rate is
disabled on pc-*-2.5 and older machine types.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Rewrote comment at kvm_arch_put_registers()]
[ehabkost: Moved compat code to pc-2.5]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Haozhong Zhang [Tue, 24 Nov 2015 03:33:56 +0000 (11:33 +0800)]
target-i386: Reorganize TSC rate setting code
Following changes are made to the TSC rate setting code in
kvm_arch_init_vcpu():
* The code is moved to a new function kvm_arch_set_tsc_khz().
* If kvm_arch_set_tsc_khz() fails, i.e. following two conditions are
both satisfied:
* KVM does not support the TSC scaling or it fails to set vcpu's
TSC rate by KVM_SET_TSC_KHZ,
* the TSC rate to be set is different than the value currently used
by KVM, then kvm_arch_init_vcpu() will fail. Prevously,
* the lack of TSC scaling never failed kvm_arch_init_vcpu(),
* the failure of KVM_SET_TSC_KHZ failed kvm_arch_init_vcpu()
unconditionally, even though the TSC rate to be set is identical
to the value currently used by KVM.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Haozhong Zhang [Tue, 24 Nov 2015 03:33:55 +0000 (11:33 +0800)]
target-i386: Fallback vcpu's TSC rate to value returned by KVM
If no user-specified TSC rate is present, we will try to set
env->tsc_khz to the value returned by KVM_GET_TSC_KHZ. This patch
does not change the current functionality of QEMU and just
prepares for later patches to enable migrating vcpu's TSC rate.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Wed, 2 Dec 2015 15:51:54 +0000 (13:51 -0200)]
target-i386: Add suffixes to MMReg struct fields
This will ensure we never use the MMX_* and ZMM_* macros with the
wrong struct type.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Wed, 2 Dec 2015 15:51:53 +0000 (13:51 -0200)]
target-i386: Define MMREG_UNION macro
This will simplify the definitions of ZMMReg and MMXReg.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Mon, 30 Nov 2015 17:44:16 +0000 (15:44 -0200)]
target-i386: Define MMXReg._d field
Add a new field and reorder MMXReg fields, to make MMXReg and
ZMMReg field lists look the same (except for the array sizes).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Thu, 26 Nov 2015 19:14:32 +0000 (17:14 -0200)]
target-i386: Rename XMM_[BWLSDQ] helpers to ZMM_*
They are helpers for the ZMMReg fields, so name them accordingly.
This is just a global search+replace, no other changes are being
introduced.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Thu, 19 Nov 2015 18:12:40 +0000 (16:12 -0200)]
target-i386: Rename struct XMMReg to ZMMReg
The struct represents a 512-bit register, so name it accordingly.
This is just a global search+replace, no other changes are being
introduced.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Thu, 19 Nov 2015 18:51:36 +0000 (16:51 -0200)]
target-i386: Use a _q array on MMXReg too
Make MMXReg use the same field names used on XMMReg, so we can
try to reuse macros and other code later.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Thu, 19 Nov 2015 18:49:14 +0000 (16:49 -0200)]
target-i386/ops_sse.h: Use MMX_Q macro
We have a MMX_Q macro in addition to MMX_{B,W,L}. Use it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Thu, 5 Mar 2015 15:38:48 +0000 (12:38 -0300)]
target-i386: Rename optimize_flags_init()
Rename the function so that the reason for its existence is
clearer: it does x86-specific initialization of TCG structures.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:09 +0000 (14:15 +0000)]
target-arm: Implement FPEXC32_EL2 system register
The AArch64 FPEXC32_EL2 system register is visible at EL2 and EL3,
and allows those exception levels to read and write the FPEXC
register for a lower exception level that is using AArch32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id:
1453132414-8127-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Thu, 21 Jan 2016 14:15:09 +0000 (14:15 +0000)]
target-arm: ignore ELR_ELx[1] for exception return to 32-bit ARM mode
The architecture requires that for an exception return to AArch32 the
low bits of ELR_ELx are ignored when the PC is set from them:
* if returning to Thumb mode, ignore ELR_ELx[0]
* if returning to ARM mode, ignore ELR_ELx[1:0]
We were only squashing bit 0; also squash bit 1 if the SPSR T bit
indicates this is a return to ARM code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:09 +0000 (14:15 +0000)]
target-arm: Implement remaining illegal return event checks
We already implement almost all the checks for the illegal
return events from AArch64 state described in the ARM ARM section
D1.11.2. Add the two missing ones:
* return to EL2 when EL3 is implemented and SCR_EL3.NS is 0
* return to Non-secure EL1 when EL2 is implemented and HCR_EL2.TGE is 1
(We don't implement external debug, so the case of "debug state exit
from EL0 using AArch64 state to EL0 using AArch32 state" doesn't apply
for QEMU.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:09 +0000 (14:15 +0000)]
target-arm: Handle exception return from AArch64 to non-EL0 AArch32
Remove the assumptions that the AArch64 exception return code was
making about a return to AArch32 always being a return to EL0.
This includes pulling out the illegal-SPSR checks so we can apply
them for return to 32 bit as well as return to 64-bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:08 +0000 (14:15 +0000)]
target-arm: Fix wrong AArch64 entry offset for EL2/EL3 target
The entry offset when taking an exception to AArch64 from a lower
exception level may be 0x400 or 0x600. 0x400 is used if the
implemented exception level immediately lower than the target level
is using AArch64, and 0x600 if it is using AArch32. We were
incorrectly implementing this as checking the exception level
that the exception was taken from. (The two can be different if
for example we take an exception from EL0 to AArch64 EL3; we should
in this case be checking EL2 if EL2 is implemented, and EL1 if
EL2 is not implemented.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:08 +0000 (14:15 +0000)]
target-arm: Pull semihosting handling out to arm_cpu_do_interrupt()
Handling of semihosting calls should depend on the register width
of the calling code, not on that of any higher exception level,
so we need to identify and handle semihosting calls before we
decide whether to deliver the exception as an entry to AArch32
or AArch64. (EXCP_SEMIHOST is also an "internal exception" so
it has no target exception level in the first place.)
This will allow AArch32 EL1 code to use semihosting calls when
running under an AArch64 EL3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 21 Jan 2016 14:15:08 +0000 (14:15 +0000)]
target-arm: Use a single entry point for AArch64 and AArch32 exceptions
If EL2 or EL3 is present on an AArch64 CPU, then exceptions can be
taken to an exception level which is running AArch32 (if only EL0
and EL1 are present then EL1 must be AArch64 and all exceptions are
taken to AArch64). To support this we need to have a single
implementation of the CPU do_interrupt() method which can handle both
32 and 64 bit exception entry.
Pull the common parts of aarch64_cpu_do_interrupt() and
arm_cpu_do_interrupt() out into a new function which calls
either the AArch32 or AArch64 specific entry code once it has
worked out which one is needed.
We temporarily special-case the handling of EXCP_SEMIHOST to
avoid an assertion in arm_el_is_aa64(); the next patch will
pull all the semihosting handling out to the arm_cpu_do_interrupt()
level (since semihosting semantics depend on the register width
of the calling code, not on that of any higher EL).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:08 +0000 (14:15 +0000)]
target-arm: Move aarch64_cpu_do_interrupt() to helper.c
Move the aarch64_cpu_do_interrupt() function to helper.c. We want
to be able to call this from code that isn't AArch64-only, and
the move allows us to avoid awkward #ifdeffery at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:08 +0000 (14:15 +0000)]
target-arm: Properly support EL2 and EL3 in arm_el_is_aa64()
Support EL2 and EL3 in arm_el_is_aa64() by implementing the
logic for checking the SCR_EL3 and HCR_EL2 register-width bits
as appropriate to determine the register width of lower exception
levels.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Alistair Francis [Thu, 21 Jan 2016 14:15:08 +0000 (14:15 +0000)]
arm_gic: Update ID registers based on revision
Update the GIC ID registers (registers above 0xfe0) based on the GIC
revision instead of using the sames values for all GIC implementations.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Message-id:
629e7fa5d47f2800e51cc1f18d12635f1eece349.
1453333840.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Christoffer Dall [Thu, 21 Jan 2016 14:15:07 +0000 (14:15 +0000)]
hw/arm/virt: Add always-on property to the virt board timer
The virt board has an arch timer, which is always on. Emit the
"always-on" property to indicate to Linux that it can switch off the
periodic timer and reduces the amount of interrupts injected into a
guest.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id:
1453204158-11412-1-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 21 Jan 2016 14:15:07 +0000 (14:15 +0000)]
hw/arm/virt: add secure memory region and UART
Add a secure memory region to the virt board, which is the
same as the nonsecure memory region except that it also has
a secure-only UART in it. This is only created if the
board is started with the '-machine secure=on' property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:07 +0000 (14:15 +0000)]
hw/arm/virt: Wire up memory region to CPUs explicitly
Wire up the system memory region to the CPUs explicitly
by setting the QOM property. This doesn't change anything
over letting it default, but will be needed for adding
a secure memory region later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:07 +0000 (14:15 +0000)]
target-arm: Support multiple address spaces in page table walks
If we have a secure address space, use it in page table walks:
when doing the physical accesses to read descriptors, make them
through the correct address space.
(The descriptor reads are the only direct physical accesses
made in target-arm/ for CPUs which might have TrustZone.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:07 +0000 (14:15 +0000)]
target-arm: Implement cpu_get_phys_page_attrs_debug
Implement cpu_get_phys_page_attrs_debug instead of cpu_get_phys_page_debug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:06 +0000 (14:15 +0000)]
target-arm: Implement asidx_from_attrs
Implement the asidx_from_attrs CPU method to return the
Secure or NonSecure address space as appropriate.
(The function is inline so we can use it directly in target-arm
code to be added in later patches.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:06 +0000 (14:15 +0000)]
target-arm: Add QOM property for Secure memory region
Add QOM property to the ARM CPU which boards can use to tell us what
memory region to use for secure accesses. Nonsecure accesses
go via the memory region specified with the base CPU class 'memory'
property.
By default, if no secure region is specified it is the same as the
nonsecure region, and if no nonsecure region is specified we will use
address_space_memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Crosthwaite [Thu, 21 Jan 2016 14:15:06 +0000 (14:15 +0000)]
qom/cpu: Add MemoryRegion property
Add a MemoryRegion property, which if set is used to construct
the CPU's initial (default) AddressSpace.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM: code is moved from qom/cpu.c to exec.c to avoid having to
make qom/cpu.o be a non-common object file; code to use the
MemoryRegion and to default it to system_memory added.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Crosthwaite [Thu, 21 Jan 2016 14:15:06 +0000 (14:15 +0000)]
memory: Add address_space_init_shareable()
This will either create a new AS or return a pointer to an
already existing equivalent one, if we have already created
an AS for the specified root memory region.
The motivation is to reuse address spaces as much as possible.
It's going to be quite common that bus masters out in device land
have pointers to the same memory region for their mastering yet
each will need to create its own address space. Let the memory
API implement sharing for them.
Aside from the perf optimisations, this should reduce the amount
of redundant output on info mtree as well.
Thee returned value will be malloced, but the malloc will be
automatically freed when the AS runs out of refs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM: dropped check for NULL root as unused; added doc-comment;
squashed Peter C's reference-counting patch into this one;
don't compare name string when deciding if we can share ASes;
read as->malloced before the unref of as->root to avoid possible
read-after-free if as->root was the owner of as]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:06 +0000 (14:15 +0000)]
exec.c: Use correct AddressSpace in watch_mem_read and watch_mem_write
In the watchpoint access routines watch_mem_read and watch_mem_write,
find the correct AddressSpace to use from current_cpu and the memory
transaction attributes, rather than always assuming address_space_memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:06 +0000 (14:15 +0000)]
exec.c: Use cpu_get_phys_page_attrs_debug
Use cpu_get_phys_page_attrs_debug() when doing virtual-to-physical
conversions in debug related code, so that we can obtain the right
address space index and thus select the correct AddressSpace,
rather than always using cpu->as.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:05 +0000 (14:15 +0000)]
exec.c: Add cpu_get_address_space()
Add a function to return the AddressSpace for a CPU based on
its numerical index. (Callers outside exec.c don't have access
to the CPUAddressSpace struct so can't just fish it out of the
CPUState struct directly.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:05 +0000 (14:15 +0000)]
exec.c: Pass MemTxAttrs to iotlb_to_region so it uses the right AS
Pass the MemTxAttrs for the memory access to iotlb_to_region(); this
allows it to determine the correct AddressSpace to use for the lookup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:05 +0000 (14:15 +0000)]
cputlb.c: Use correct address space when looking up MemoryRegionSection
When looking up the MemoryRegionSection for the new TLB entry in
tlb_set_page_with_attrs(), use cpu_asidx_from_attrs() to determine
the correct address space index for the lookup, and pass it into
address_space_translate_for_iotlb().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:05 +0000 (14:15 +0000)]
cpu: Add new asidx_from_attrs() method
Add a new method to CPUClass which the memory system core can
use to obtain the correct address space index to use for a memory
access with a given set of transaction attributes, together
with the wrapper function cpu_asidx_from_attrs() which implements
the default behaviour ("always use asidx 0") for CPU classes
which don't provide the method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:05 +0000 (14:15 +0000)]
cpu: Add new get_phys_page_attrs_debug() method
Add a new optional method get_phys_page_attrs_debug() to CPUClass.
This is like the existing get_phys_page_debug(), but also returns
the memory transaction attributes to use for the access.
This will be necessary for CPUs which have multiple address
spaces and use the attributes to select the correct address
space.
We provide a wrapper function cpu_get_phys_page_attrs_debug()
which falls back to the existing get_phys_page_debug(), so we
don't need to change every target CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:04 +0000 (14:15 +0000)]
exec-all.h: Document tlb_set_page_with_attrs, tlb_set_page
Add documentation comments for tlb_set_page_with_attrs()
and tlb_set_page().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:04 +0000 (14:15 +0000)]
exec.c: Allow target CPUs to define multiple AddressSpaces
Allow multiple calls to cpu_address_space_init(); each
call adds an entry to the cpu->ases array at the specified
index. It is up to the target-specific CPU code to actually use
these extra address spaces.
Since this multiple AddressSpace support won't work with
KVM, add an assertion to avoid confusing failures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Thu, 21 Jan 2016 14:15:04 +0000 (14:15 +0000)]
exec.c: Don't set cpu->as until cpu_address_space_init
Rather than setting cpu->as unconditionally in cpu_exec_init
(and then having target-i386 override this later), don't set
it until the first call to cpu_address_space_init.
This requires us to initialise the address space for
both TCG and KVM (KVM doesn't need the AS listener but
it does require cpu->as to be set).
For target CPUs which don't set up any address spaces (currently
everything except i386), add the default address_space_memory
in qemu_init_vcpu().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Crosthwaite [Thu, 21 Jan 2016 14:15:04 +0000 (14:15 +0000)]
misc: zynq-xadc: Fix off-by-one
This bounds check was off-by-one. Fix.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
1453101737-11255-1-git-send-email-crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Thu, 21 Jan 2016 14:15:04 +0000 (14:15 +0000)]
xlnx-ep108: Connect the SPI Flash
Connect the sst25wf080 SPI flash to the EP108 board.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[PMM: free string when finished with it]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Thu, 21 Jan 2016 14:15:03 +0000 (14:15 +0000)]
xlnx-zynqmp: Connect the SPI devices
Connect the Xilinx SPI devices to the ZynqMP model.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[ PC changes
* Use QOM alias for bus connectivity on SoC level
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[PMM: free the g_strdup_printf() string when finished with it]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Thu, 21 Jan 2016 14:15:03 +0000 (14:15 +0000)]
xilinx_spips: Separate the state struct into a header
Separate out the XilinxSPIPS struct into a separate header
file.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Thu, 21 Jan 2016 14:15:03 +0000 (14:15 +0000)]
ssi: Move ssi.h into a separate directory
Move the ssi.h include file into the ssi directory.
While touching the code also fix the typdef lines as
checkpatch complains.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Thu, 21 Jan 2016 14:15:03 +0000 (14:15 +0000)]
m25p80.c: Add sst25wf080 SPI flash device
Add the sst25wf080 SPI flash device.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Thu, 21 Jan 2016 14:15:03 +0000 (14:15 +0000)]
qdev: get_child_bus(): Use QOM lookup if available
qbus_realize() adds busses as a QOM child of the device in addition to
adding it to the qdev bus list. Change get_child_bus() to use the QOM
child if it is available. This takes priority over the bus-list, but
the child object is checked for type correctness.
This prepares support for aliasing of buses. The use case is SoCs,
where a SoC container needs to present buses to the board level, but
the buses are implemented by controller IP we already model as self
contained qbus-containing devices.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 21 Jan 2016 13:09:47 +0000 (13:09 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Wed 20 Jan 2016 15:37:57 GMT using RSA key ID
C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
iotests: Test that throttle values ranges
blockdev: Error out on negative throttling option values
vmdk: Create streamOptimized as version 3
qcow2: Make image inaccessible after failed qcow2_invalidate_cache()
qcow2: Fix BDRV_O_INACTIVE handling in qcow2_invalidate_cache()
qcow2: Implement .bdrv_inactivate
block: Inactivate BDS when migration completes
block: Rename BDRV_O_INCOMING to BDRV_O_INACTIVE
block: Fix error path in bdrv_invalidate_cache()
block: Assert no write requests under BDRV_O_INCOMING
qcow2: Write full header on image creation
qcow2: Write feature table only for v3 images
block: Clean up includes
qemu-iotests: Reduce racy output in 028
qemu-img: Speed up comparing empty/zero images
block/raw-posix: avoid bogus fixup for cylinders on DASD disks
block: Fix .bdrv_open flags
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 21 Jan 2016 12:42:17 +0000 (12:42 +0000)]
Merge remote-tracking branch 'remotes/berrange/tags/pull-io-next-2016-01-20-1' into staging
I/O channels fixes 2016/01/20 v1
# gpg: Signature made Wed 20 Jan 2016 11:31:47 GMT using RSA key ID
15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/pull-io-next-2016-01-20-1:
io: use memset instead of { 0 } for initializing array
io: fix description of @errp parameter initialization
io: some fixes to handling of /dev/null when running commands
io: increment counter when killing off subcommand
io: fix sign of errno value passed to error report
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 21 Jan 2016 12:09:41 +0000 (12:09 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-socket-
20160120-1' into staging
Convert qemu-socket to use QAPI exclusively, update MAINTAINERS.
# gpg: Signature made Wed 20 Jan 2016 06:49:07 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-socket-
20160120-1:
vnc: distiguish between ipv4/ipv6 omitted vs set to off
sockets: remove use of QemuOpts from socket_dgram
sockets: remove use of QemuOpts from socket_connect
sockets: remove use of QemuOpts from socket_listen
sockets: remove use of QemuOpts from header file
add MAINTAINERS entry for qemu socket code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 21 Jan 2016 11:06:11 +0000 (11:06 +0000)]
Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-
20160119.0' into staging
VFIO updates 2016-01-19
- Performance fix for devices with poorly placed MSI-X PBA regions
- Quirk fix for hosts with broken MMCONFIG access
# gpg: Signature made Tue 19 Jan 2016 19:00:21 GMT using RSA key ID
3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
* remotes/awilliam/tags/vfio-update-
20160119.0:
vfio/pci: Lazy PBA emulation
vfio/pci-quirks: Only quirk to size of PCI config space
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fam Zheng [Wed, 20 Jan 2016 04:21:21 +0000 (12:21 +0800)]
iotests: Test that throttle values ranges
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Wed, 20 Jan 2016 04:21:20 +0000 (12:21 +0800)]
blockdev: Error out on negative throttling option values
extract_common_blockdev_options() uses qemu_opt_get_number() to parse
the bps/iops numbers to uint64_t, then converts to double and stores in
ThrottleConfig. The actual parsing is done by strtoull() in
parse_option_number(). Negative numbers are wrapped to large positive
ones, and stored.
We used to reject negative numbers since
7d81c1413c9, but this regressed
when the option parsing code was changed later. Now fix this again.
This time, define an arbitrary large upper limit (1e15), and check the
values so both negative and impractically big numbers are caught and
reported.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Thu, 17 Sep 2015 05:04:10 +0000 (13:04 +0800)]
vmdk: Create streamOptimized as version 3
VMware products accept only version 3 for streamOptimized, let's bump
the version.
Reported-by: Radoslav Gerganov <rgerganov@vmware.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 22 Dec 2015 15:14:10 +0000 (16:14 +0100)]
qcow2: Make image inaccessible after failed qcow2_invalidate_cache()
If qcow2_invalidate_cache() fails, we are in a state where qcow2_close()
has already been completed, but the image hasn't been reopened yet.
Calling into any qcow2 function for an image in this state will cause
crashes.
The real solution would be to get rid of the close/open pair and instead
do an atomic reset of the involved data structures, but this isn't
trivial, so let's just make the image inaccessible for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Tue, 22 Dec 2015 15:10:32 +0000 (16:10 +0100)]
qcow2: Fix BDRV_O_INACTIVE handling in qcow2_invalidate_cache()
What qcow2_invalidate_cache() should do is close the image with
BDRV_O_INACTIVE set and reopen it with the flag cleared. In fact, it
used to do exactly the opposite: qcow2_close() relied on bs->open_flags,
which is already updated to have cleared BDRV_O_INACTIVE at this point,
whereas qcow2_open() was called with s->flags, which has the flag still
set. Fix this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Tue, 22 Dec 2015 15:04:57 +0000 (16:04 +0100)]
qcow2: Implement .bdrv_inactivate
The callback has to ensure that closing or flushing the image afterwards
wouldn't cause a write access to the image files. This means that just
the caches have to be written out, which is part of the existing
.bdrv_close implementation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Tue, 22 Dec 2015 13:07:08 +0000 (14:07 +0100)]
block: Inactivate BDS when migration completes
So far, live migration with shared storage meant that the image is in a
not-really-ready don't-touch-me state on the destination while the
source is still actively using it, but after completing the migration,
the image was fully opened on both sides. This is bad.
This patch adds a block driver callback to inactivate images on the
source before completing the migration. Inactivation means that it goes
to a state as if it was just live migrated to the qemu instance on the
source (i.e. BDRV_O_INACTIVE is set). You're then supposed to continue
either on the source or on the destination, which takes ownership of the
image.
A typical migration looks like this now with respect to disk images:
1. Destination qemu is started, the image is opened with
BDRV_O_INACTIVE. The image is fully opened on the source.
2. Migration is about to complete. The source flushes the image and
inactivates it. Now both sides have the image opened with
BDRV_O_INACTIVE and are expecting the other side to still modify it.
3. One side (the destination on success) continues and calls
bdrv_invalidate_all() in order to take ownership of the image again.
This removes BDRV_O_INACTIVE on the resuming side; the flag remains
set on the other side.
This ensures that the same image isn't written to by both instances
(unless both are resumed, but then you get what you deserve). This is
important because .bdrv_close for non-BDRV_O_INACTIVE images could write
to the image file, which is definitely forbidden while another host is
using the image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Wed, 13 Jan 2016 14:56:06 +0000 (15:56 +0100)]
block: Rename BDRV_O_INCOMING to BDRV_O_INACTIVE
Instead of covering only the state of images on the migration
destination before the migration is completed, the flag will also cover
the state of images on the migration source after completion. This
common state implies that the image is technically still open, but no
writes will happen and any cached contents will be reloaded from disk if
and when the image leaves this state.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Wed, 16 Dec 2015 15:05:21 +0000 (16:05 +0100)]
block: Fix error path in bdrv_invalidate_cache()
We can only clear BDRV_O_INCOMING if the caches were actually
invalidated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Wed, 16 Dec 2015 13:00:36 +0000 (14:00 +0100)]
block: Assert no write requests under BDRV_O_INCOMING
As long as BDRV_O_INCOMING is set, the image file is only opened so we
have a file descriptor for it. We're definitely not supposed to modify
the image, it's still owned by the migration source.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Wed, 2 Dec 2015 17:34:39 +0000 (18:34 +0100)]
qcow2: Write full header on image creation
When creating a qcow2 image, we didn't necessarily call
qcow2_update_header(), but could end up with the basic header that
qcow2_create2() created manually. One thing that this basic header
lacks is the feature table. Let's make sure that it's always present.
This requires a few updates to test cases as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Wed, 2 Dec 2015 18:11:04 +0000 (19:11 +0100)]
qcow2: Write feature table only for v3 images
Version 2 images don't have feature bits, so writing a feature table to
those images is kind of pointless.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Peter Maydell [Mon, 18 Jan 2016 18:01:42 +0000 (18:01 +0000)]
block: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Eric Blake [Fri, 11 Dec 2015 03:27:17 +0000 (20:27 -0700)]
qemu-iotests: Reduce racy output in 028
On my machine, './check -qcow2 028' was failing about 80% of the
time, due to a race in how many times the repeated attempts
to run 'info block-jobs' could occur before the job was done,
showing up as a failure of fewer '(qemu) ' prompts than in the
expected output. Silence the output during the repetitions, then
add a final clean command to keep the expected output useful;
once patched, I was finally able to run the test 20 times in a
row with no failures.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Wed, 13 Jan 2016 08:37:41 +0000 (16:37 +0800)]
qemu-img: Speed up comparing empty/zero images
Two empty raw files are always compared by actually reading data even if
there is no data, because BDRV_BLOCK_ZERO is considered "allocated" in
bdrv_is_allocated_above(). That is inefficient.
Use bdrv_get_block_status_above() for more information, and skip the
consecutive zero sectors.
This brings a huge speed up in comparing sparse/empty raw images:
$ qemu-img create a 1G
$ time ~/build/master/bin/qemu-img compare a a
Images are identical.
real 0m6.583s
user 0m0.191s
sys 0m6.367s
$ time qemu-img compare a a
Images are identical.
real 0m0.033s
user 0m0.003s
sys 0m0.031s
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Daniel P. Berrange [Mon, 18 Jan 2016 10:37:21 +0000 (10:37 +0000)]
io: use memset instead of { 0 } for initializing array
Some versions of GCC on OS-X complain about CMSG_SPACE
not being constant size, which prevents use of { 0 }
io/channel-socket.c: In function 'qio_channel_socket_writev':
io/channel-socket.c:497:18: error: variable-sized object may not be initialized
char control[CMSG_SPACE(sizeof(int) * SOCKET_MAX_FDS)] = { 0 };
The compiler is at fault here, but it is nicer to avoid
tickling this compiler bug by using memset instead.
Reviewed-By: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Wed, 13 Jan 2016 12:22:33 +0000 (12:22 +0000)]
io: fix description of @errp parameter initialization
The "Error **errp" parameters must be NULL initialized
not uninitialized.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Mon, 11 Jan 2016 13:02:16 +0000 (13:02 +0000)]
io: some fixes to handling of /dev/null when running commands
The /dev/null file handle was leaked in a couple of places.
There is also the possibility that both readfd and writefd
point to the same /dev/null file handle, so care must be
taken not to close the same file handle twice.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alex Williamson [Tue, 19 Jan 2016 18:33:42 +0000 (11:33 -0700)]
vfio/pci: Lazy PBA emulation
The PCI spec recommends devices use additional alignment for MSI-X
data structures to allow software to map them to separate processor
pages. One advantage of doing this is that we can emulate those data
structures without a significant performance impact to the operation
of the device. Some devices fail to implement that suggestion and
assigned device performance suffers.
One such case of this is a Mellanox MT27500 series, ConnectX-3 VF,
where the MSI-X vector table and PBA are aligned on separate 4K
pages. If PBA emulation is enabled, performance suffers. It's not
clear how much value we get from PBA emulation, but the solution here
is to only lazily enable the emulated PBA when a masked MSI-X vector
fires. We then attempt to more aggresively disable the PBA memory
region any time a vector is unmasked. The expectation is then that
a typical VM will run entirely with PBA emulation disabled, and only
when used is that emulation re-enabled.
Reported-by: Shyam Kaushik <shyam.kaushik@gmail.com>
Tested-by: Shyam Kaushik <shyam.kaushik@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Alex Williamson [Tue, 19 Jan 2016 18:33:41 +0000 (11:33 -0700)]
vfio/pci-quirks: Only quirk to size of PCI config space
For quirks that support the full PCIe extended config space, limit the
quirk to only the size of config space available through vfio. This
allows host systems with broken MMCONFIG regions to still make use of
these quirks without generating bad address faults trying to access
beyond the end of config space exposed through vfio. This may expose
direct access to the mirror of extended config space, only trapping
the sub-range of standard config space, but allowing this makes the
quirk, and thus the device, functional. We expect that only device
specific accesses make use of the mirror, not general extended PCI
capability accesses, so any virtualization in this space is likely
unnecessary anyway, and the device is still IOMMU isolated, so it
should only be able to hurt itself through any bogus configurations
enabled by this space.
Link: https://www.redhat.com/archives/vfio-users/2015-November/msg00192.html
Reported-by: Ronnie Swanink <ronnie@ronnieswanink.nl>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>