Olga Kornievskaia [Thu, 24 Mar 2022 14:22:58 +0000 (10:22 -0400)]
SUNRPC don't resend a task on an offlined transport
[ Upstream commit
82ee41b85cef16b4be1f4732650012d9baaedddd ]
When a task is being retried, due to an NFS error, if the assigned
transport has been put offline and the task is relocatable pick a new
transport.
Fixes:
6f081693e7b2b ("sunrpc: remove an offlined xprt using sysfs")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Mon, 21 Mar 2022 10:38:32 +0000 (11:38 +0100)]
netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
[ Upstream commit
f2dd495a8d589371289981d5ed33e6873df94ecc ]
Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios
coming before the TCP window tracking, otherwise such connections will
fail in the window check.
Update tcp_options() to leave this flag in place and add a new helper
function to reset the tcp window state.
Based on patch from Sven Auhagen.
Fixes:
c4832c7bbc3f ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking")
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Sat, 19 Mar 2022 19:30:00 +0000 (22:30 +0300)]
jfs: fix divide error in dbNextAG
[ Upstream commit
2cc7cc01c15f57d056318c33705647f87dcd4aab ]
Syzbot reported divide error in dbNextAG(). The problem was in missing
validation check for malicious image.
Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any
validation checks, but dbNextAG() blindly use bmp->db_numag in divide
expression
Fix it by validating bmp->db_numag in dbMount() and return an error if
image is malicious
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+46f5c25af73eb8330eb6@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Tue, 1 Mar 2022 04:18:29 +0000 (20:18 -0800)]
driver core: dd: fix return value of __setup handler
[ Upstream commit
f2aad54703dbe630f9d8b235eb58e8c8cc78f37d ]
When "driver_async_probe=nulltty" is used on the kernel boot command line,
it causes an Unknown parameter message and the string is added to init's
environment strings, polluting them.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6
driver_async_probe=nulltty", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
driver_async_probe=nulltty
Change the return value of the __setup function to 1 to indicate
that the __setup option has been handled.
Link: lore.kernel.org/r/
64644a2f-4a20-bab3-1e15-
3b2cdd0defe3@omprussia.ru
Fixes:
1ea61b68d0f8 ("async: Add cmdline option to specify drivers to be async probed")
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220301041829.15137-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Gow [Fri, 25 Feb 2022 04:15:02 +0000 (12:15 +0800)]
firmware: google: Properly state IOMEM dependency
[ Upstream commit
37fd83916da2e4cae03d350015c82a67b1b334c4 ]
The Google Coreboot implementation requires IOMEM functions
(memmremap, memunmap, devm_memremap), but does not specify this is its
Kconfig. This results in build errors when HAS_IOMEM is not set, such as
on some UML configurations:
/usr/bin/ld: drivers/firmware/google/coreboot_table.o: in function `coreboot_table_probe':
coreboot_table.c:(.text+0x311): undefined reference to `memremap'
/usr/bin/ld: coreboot_table.c:(.text+0x34e): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/memconsole-coreboot.o: in function `memconsole_probe':
memconsole-coreboot.c:(.text+0x12d): undefined reference to `memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x17e): undefined reference to `devm_memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x191): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_destroy.isra.0':
vpd.c:(.text+0x300): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_init':
vpd.c:(.text+0x382): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x459): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_probe':
vpd.c:(.text+0x59d): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x5d3): undefined reference to `memunmap'
collect2: error: ld returned 1 exit status
Fixes:
a28aad66da8b ("firmware: coreboot: Collapse platform drivers into bus core")
Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com>
Acked-By: Julius Werner <jwerner@chromium.org>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20220225041502.1901806-1-davidgow@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Tue, 8 Mar 2022 03:32:55 +0000 (19:32 -0800)]
kgdbts: fix return value of __setup handler
[ Upstream commit
96c9e802c64014a7716865332d732cc9c7f24593 ]
__setup() handlers should return 1 to indicate that the boot option
has been handled. A return of 0 causes the boot option/value to be
listed as an Unknown kernel parameter and added to init's (limited)
environment strings. So return 1 from kgdbts_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/
64644a2f-4a20-bab3-1e15-
3b2cdd0defe3@omprussia.ru
Fixes:
e8d31c204e36 ("kgdb: add kgdb internal test suite")
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308033255.22118-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaolong Huang [Tue, 8 Mar 2022 09:20:47 +0000 (17:20 +0800)]
virt: acrn: fix a memory leak in acrn_dev_ioctl()
[ Upstream commit
ecd1735f14d6ac868ae5d8b7a2bf193fa11f388b ]
The vm_param and cpu_regs need to be freed via kfree()
before return -EINVAL error.
Fixes:
9c5137aedd11 ("virt: acrn: Introduce VM management interfaces")
Fixes:
2ad2aaee1bc9 ("virt: acrn: Introduce an ioctl to set vCPU registers state")
Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/r/20220308092047.1008409-1-butterflyhuangxx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonghua Huang [Mon, 28 Feb 2022 02:22:12 +0000 (05:22 +0300)]
virt: acrn: obtain pa from VMA with PFNMAP flag
[ Upstream commit
8a6e85f75a83d16a71077e41f2720c691f432002 ]
acrn_vm_ram_map can't pin the user pages with VM_PFNMAP flag
by calling get_user_pages_fast(), the PA(physical pages)
may be mapped by kernel driver and set PFNMAP flag.
This patch fixes logic to setup EPT mapping for PFN mapped RAM region
by checking the memory attribute before adding EPT mapping for them.
Fixes:
88f537d5e8dd ("virt: acrn: Introduce EPT mapping management")
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/r/20220228022212.419406-1-yonghua.huang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Mon, 14 Mar 2022 09:14:32 +0000 (11:14 +0200)]
serial: 8250: fix XOFF/XON sending when DMA is used
[ Upstream commit
f58c252e30cf74f68b0054293adc03b5923b9f0e ]
When 8250 UART is using DMA, x_char (XON/XOFF) is never sent
to the wire. After this change, x_char is injected correctly.
Create uart_xchar_out() helper for sending the x_char out and
accounting related to it. It seems that almost every driver
does these same steps with x_char. Except for 8250, however,
almost all currently lack .serial_out so they cannot immediately
take advantage of this new helper.
The downside of this patch is that it might reintroduce
the problems some devices faced with mixed DMA/non-DMA transfer
which caused revert
f967fc8f165f (Revert "serial: 8250_dma:
don't bother DMA with small transfers"). However, the impact
should be limited to cases with XON/XOFF (that didn't work
with DMA capable devices to begin with so this problem is not
very likely to cause a major issue, if any at all).
Fixes:
9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Reported-by: Gilles Buloz <gilles.buloz@kontron.com>
Tested-by: Gilles Buloz <gilles.buloz@kontron.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220314091432.4288-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Wed, 9 Mar 2022 03:30:18 +0000 (19:30 -0800)]
kgdboc: fix return value of __setup handler
[ Upstream commit
ab818c7aa7544bf8d2dd4bdf68878b17a02eb332 ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
So return 1 from kgdboc_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/
64644a2f-4a20-bab3-1e15-
3b2cdd0defe3@omprussia.ru
Fixes:
1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic")
Fixes:
f2d937f3bf00 ("consoles: polling support, kgdboc")
Cc: He Zhe <zhe.he@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-serial@vger.kernel.org
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220309033018.17936-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Tue, 8 Mar 2022 02:42:28 +0000 (18:42 -0800)]
tty: hvc: fix return value of __setup handler
[ Upstream commit
53819a0d97aace1425bb042829e3446952a9e8a9 ]
__setup() handlers should return 1 to indicate that the boot option
has been handled or 0 to indicate that it was not handled.
Add a pr_warn() message if the option value is invalid and then
always return 1.
Link: lore.kernel.org/r/
64644a2f-4a20-bab3-1e15-
3b2cdd0defe3@omprussia.ru
Fixes:
86b40567b917 ("tty: replace strict_strtoul() with kstrtoul()")
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308024228.20477-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 7 Mar 2022 12:02:34 +0000 (12:02 +0000)]
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
[ Upstream commit
89388f8730699c259f8090ec435fb43569efe4ac ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes:
1e747e59cc4d ("pinctrl: rockchip: base regmap supplied by a syscon")
Fixes:
14dee8677e19 ("pinctrl: rockchip: let pmu registers be supplied by a syscon")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307120234.28657-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 7 Mar 2022 11:51:16 +0000 (11:51 +0000)]
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
[ Upstream commit
c09ac191b1f97cfa06f394dbfd7a5db07986cefc ]
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid
the refcount leak.
Fixes:
32e67eee670e ("pinctrl: nomadik: Allow prcm_base to be extracted from Device Tree")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307115116.25316-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Sat, 26 Feb 2022 20:45:03 +0000 (21:45 +0100)]
pinctrl: microchip-sgpio: lock RMW access
[ Upstream commit
7996c5f5ec7a20b3f6b8fae93fcf3cb8f1c01743 ]
Protect any RMW access to the registers by a spinlock.
Fixes:
7e5ea974e61c ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-2-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Horatiu Vultur [Mon, 18 Oct 2021 08:57:54 +0000 (10:57 +0200)]
pinctrl: microchip sgpio: use reset driver
[ Upstream commit
0b90315af7602aeb40fe7b6255ab212a19dbd78e ]
On lan966x platform when the switch gets reseted then also the sgpio
gets reseted. The fix for this is to extend also the sgpio driver to
call the reset driver which will be reseted only once by the first
driver that is probed.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20211018085754.1066056-3-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Tue, 8 Mar 2022 10:09:51 +0000 (18:09 +0800)]
pinctrl: mediatek: paris: Skip custom extra pin config dump for virtual GPIOs
[ Upstream commit
1763933d377ecb05454f8d20e3c8922480db2ac0 ]
Virtual GPIOs do not have any hardware state associated with them. Any
attempt to read back hardware state for these pins result in error
codes.
Skip dumping extra pin config information for these virtual GPIOs.
Fixes:
184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-7-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Tue, 8 Mar 2022 10:09:49 +0000 (18:09 +0800)]
pinctrl: mediatek: paris: Fix pingroup pin config state readback
[ Upstream commit
54fe55fb384ade630ef20b9a8b8f3b2a89ad97f2 ]
mtk_pconf_group_get(), used to read back pingroup pin config state,
simply returns a set of configs saved from a previous invocation of
mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed
in from the pinconf core, which does not match the current hardware
state.
Since the driver library is designed to have one pin per group, pass
through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the
current pin config state of the only pin in the group.
Also drop the assignment of pin config state to the group.
Fixes:
805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-5-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Tue, 8 Mar 2022 10:09:48 +0000 (18:09 +0800)]
pinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()
[ Upstream commit
19bce7ce0a593c7024030a0cda9e23facea3c93d ]
For mtk_pinconf_get(), the "argument" argument is typically returned by
pinconf_to_config_argument(), which holds the value for a given pinconf
parameter. It certainly should not have the type of "enum pin_config_param",
which describes the type of the pinconf parameter itself.
Change the type to u32, which matches the return type of
pinconf_to_config_argument().
Fixes:
805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-4-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Tue, 8 Mar 2022 10:09:47 +0000 (18:09 +0800)]
pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_* readback
[ Upstream commit
3e8c6bc608480010f360c4a59578d7841726137d ]
When reading back pin bias settings, if the pin is not in the
corresponding bias state, the function should return -EINVAL.
Fix this in the mediatek-paris pinctrl library so that the read back
state is not littered with bogus a "input bias disabled" combined with
"pull up" or "pull down" states.
Fixes:
805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-3-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 8 Mar 2022 07:11:54 +0000 (07:11 +0000)]
pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
[ Upstream commit
dab4df9ca919f59e5b9dd84385eaf34d4f20dbb0 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes:
a6df410d420a ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308071155.21114-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arınç ÜNAL [Fri, 11 Mar 2022 09:03:20 +0000 (12:03 +0300)]
staging: mt7621-dts: fix GB-PC2 devicetree
[ Upstream commit
5bc148649cf358d0cccf525452a4efbd4bc89a0f ]
Fix the GB-PC2 devicetree. Refer to the schematics of the device for more
information.
GB-PC2 devicetree fixes:
- Include mt7621.dtsi instead of gbpc1.dts. Add the missing definitions.
- Remove gpio-leds node as the system LED is not wired to anywhere on
the board and the power LED is directly wired to GND.
- Remove uart3 pin group from gpio-pinmux node as it's not used as GPIO.
- Use reg 7 for the external phy to be on par with
Documentation/devicetree/bindings/net/dsa/mt7530.txt.
- Use the status value "okay".
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220311090320.3068-2-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arınç ÜNAL [Tue, 25 Jan 2022 15:39:03 +0000 (18:39 +0300)]
staging: mt7621-dts: fix pinctrl properties for ethernet
[ Upstream commit
0a93c0d75809582893e82039143591b9265b520e ]
Add pinctrl properties with rgmii1 & mdio pins under ethernet node which
was wrongfully put under an external phy node.
GMAC1 will start working with this fix.
Link: https://lore.kernel.org/netdev/02ecce91-7aad-4392-c9d7-f45ca1b31e0b@arinc9.com/T/
Move GB-PC2 specific phy_external node to its own device tree.
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220125153903.1469-5-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arınç ÜNAL [Tue, 25 Jan 2022 15:39:00 +0000 (18:39 +0300)]
staging: mt7621-dts: fix formatting
[ Upstream commit
7eeec44d33f6be7caca4fe9ca4e653cf315a36c1 ]
Fix formatting on mt7621.dtsi.
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220125153903.1469-2-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arınç ÜNAL [Fri, 11 Mar 2022 09:03:19 +0000 (12:03 +0300)]
staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree
[ Upstream commit
6256e18686158fa49e019297f990f1c1817aabf1 ]
Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the
schematics of the device for more information.
LED fixes:
- Change GPIO6 LED label from system to power as GPIO6 is connected to
PLED.
- Add default-on default-trigger to power LED.
- Change GPIO8 LED label from status to system as GPIO8 is connected to
SYS_LED.
- Add disk-activity default-trigger to system LED.
- Switch to the color:function naming scheme.
- Remove lan1 and lan2 LEDs as they don't exist.
Pinctrl fixes:
- Claim state_default node under pinctrl node.
- Change pinctrl0 node name to state-default.
- Change gpio node name to gpio-pinmux to respect
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml.
- Sort pin groups alphabetically.
Misc fixes:
- Fix formatting.
- Use the status value "okay".
- Define hexadecimal addresses in lower case.
- Make hexadecimal addresses for memory easier to read.
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC1_V1.0_Schematic.pdf
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220311090320.3068-1-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Khoroshilov [Tue, 15 Feb 2022 10:17:04 +0000 (13:17 +0300)]
NFS: remove unneeded check in decode_devicenotify_args()
[ Upstream commit
cb8fac6d2727f79f211e745b16c9abbf4d8be652 ]
[You don't often get email from khoroshilov@ispras.ru. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
Overflow check in not needed anymore after we switch to kmalloc_array().
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes:
a4f743a6bb20 ("NFSv4.1: Convert open-coded array allocation calls to kmalloc_array()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robin Gong [Mon, 7 Feb 2022 01:52:07 +0000 (09:52 +0800)]
mailbox: imx: fix crash in resume on i.mx8ulp
[ Upstream commit
8219efd08a0aa1d7944bdb66d84ba57549258968 ]
check 'priv->clk' before 'imx_mu_read()' otherwise crash happens on
i.mx8ulp, since clock not enabled.
Fixes:
4f0b776ef5831 ("mailbox: imx-mailbox: support i.MX8ULP MU")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Wed, 12 Jan 2022 10:45:01 +0000 (10:45 +0000)]
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
[ Upstream commit
6d6ef58c2470da85a99119f74d34216c8074b9f0 ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes:
2db04f16b589 ("clk: tegra: Add EMC clock driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220112104501.30655-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxime Ripard [Fri, 25 Feb 2022 14:35:23 +0000 (15:35 +0100)]
clk: Fix clk_hw_get_clk() when dev is NULL
[ Upstream commit
0c1b56df451716ba207bbf59f303473643eee4fd ]
Any registered clk_core structure can have a NULL pointer in its dev
field. While never actually documented, this is evidenced by the wide
usage of clk_register and clk_hw_register with a NULL device pointer,
and the fact that the core of_clk_hw_register() function also passes a
NULL device pointer.
A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that
case will result in a NULL pointer derefence when it calls dev_name() on
that NULL device pointer.
Add a test for this case and use NULL as the dev_id if the device
pointer is NULL.
Fixes:
30d6f8c15d2c ("clk: add api to get clk consumer from clk_hw")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220225143534.405820-2-maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Neuschäfer [Fri, 18 Feb 2022 00:09:20 +0000 (01:09 +0100)]
clk: clps711x: Terminate clk_div_table with sentinel element
[ Upstream commit
8bed4ed5aa3431085d9d27afc35d684856460eda ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
Fixes:
631c53478973d ("clk: Add CLPS711X clk driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-5-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Neuschäfer [Fri, 18 Feb 2022 00:09:19 +0000 (01:09 +0100)]
clk: hisilicon: Terminate clk_div_table with sentinel element
[ Upstream commit
113b261bdf2b4fd34e7769a147a7acd0a4d9137f ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
Fixes:
6c81966107dc0 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-4-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Neuschäfer [Fri, 18 Feb 2022 00:09:18 +0000 (01:09 +0100)]
clk: loongson1: Terminate clk_div_table with sentinel element
[ Upstream commit
3eb00f89162e80083dfcaa842468b510462cfeaa ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
Fixes:
b4626a7f4892 ("CLK: Add Loongson1C clock support")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Link: https://lore.kernel.org/r/20220218000922.134857-3-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Neuschäfer [Fri, 18 Feb 2022 00:09:17 +0000 (01:09 +0100)]
clk: actions: Terminate clk_div_table with sentinel element
[ Upstream commit
d8a441e53e2434b1401e52dfd66b05263e442edc ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
In owl-s900.s, the { 0, 8 } element was probably meant to be just that,
so this patch changes { 0, 8 } to { 0, 0 }.
Fixes:
d47317ca4ade1 ("clk: actions: Add S700 SoC clock support")
Fixes:
d85d20053e195 ("clk: actions: Add S900 SoC clock support")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220218000922.134857-2-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Thu, 10 Mar 2022 03:49:21 +0000 (19:49 -0800)]
nvdimm/region: Fix default alignment for small regions
[ Upstream commit
d9d290d7e659e9db3e4518040cc18b97f5535f4a ]
In preparation for removing BLK aperture support the NVDIMM unit tests
discovered that the default alignment can be set higher than the
capacity of the region. Fall back to PAGE_SIZE in that case.
Given this has not been seen in the wild, elide notifying -stable.
Fixes:
2522afb86a8c ("libnvdimm/region: Introduce an 'align' attribute")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688416128.2879318.17890707310125575258.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 8 Mar 2022 06:45:21 +0000 (06:45 +0000)]
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
[ Upstream commit
07a5dcc4bed9d7cae54adf5aa10ff9f037a3204b ]
The device_node pointer is returned by of_parse_phandle() or
of_get_child_by_name() with refcount incremented.
We should use of_node_put() on it when done.
This function only call of_node_put(node) when of_address_to_resource
succeeds, missing error cases.
Fixes:
278d744c46fd ("remoteproc: qcom: Fix potential device node leaks")
Fixes:
051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308064522.13804-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 8 Mar 2022 06:31:02 +0000 (06:31 +0000)]
remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
[ Upstream commit
8f90161a66bc3d6b9fe8dde4d9028d20eae1b62a ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes:
aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308063102.10049-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 8 Mar 2022 03:12:19 +0000 (03:12 +0000)]
remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region
[ Upstream commit
505b5b1616e200042999de715dbe7c1e2735cd65 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes:
dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308031219.4718-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jie Hai [Wed, 16 Feb 2022 07:21:01 +0000 (15:21 +0800)]
dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma
[ Upstream commit
b95044b38425f563404234d96bbb20cc6360c7e1 ]
Remove the loaded hisi_dma driver and reload it, the driver fails
to work properly. The following error is reported in the kernel log:
[ 1475.597609] hisi_dma 0000:7b:00.0: Failed to allocate MSI vectors!
[ 1475.604915] hisi_dma: probe of 0000:7b:00.0 failed with error -28
As noted in "The MSI Driver Guide HOWTO"[1], the number of MSI
interrupt must be a power of two. The Kunpeng DMA driver allocates 30
MSI interrupts. As a result, no space left on device is reported
when the driver is reloaded and allocates interrupt vectors from the
interrupt domain.
This patch changes the number of interrupt vectors allocated by
hisi_dma driver to 32 to avoid this problem.
[1] https://www.kernel.org/doc/html/latest/PCI/msi-howto.html
Fixes:
e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220216072101.34473-1-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taniya Das [Sun, 27 Feb 2022 17:55:36 +0000 (23:25 +0530)]
clk: qcom: clk-rcg2: Update the frac table for pixel clock
[ Upstream commit
b527358cb4cd58a8279c9062b0786f1fab628fdc ]
Support the new numerator and denominator for pixel clock on SM8350 and
support rgb101010, RGB888 use cases on SM8450.
Fixes:
99cbd064b059f ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-2-tdas@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taniya Das [Sun, 27 Feb 2022 17:55:35 +0000 (23:25 +0530)]
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
[ Upstream commit
58922910add18583d5273c2edcdb9fd7bf4eca02 ]
The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range.
Fixes:
99cbd064b059f ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-1-tdas@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Codrin Ciubotariu [Fri, 4 Mar 2022 18:26:16 +0000 (20:26 +0200)]
clk: at91: sama7g5: fix parents of PDMCs' GCLK
[ Upstream commit
1a944729d8635fa59638f24e8727d5ccaa0c8c19 ]
Audio PLL can be used as parent by the GCLKs of PDMCs.
Fixes:
cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220304182616.1920392-1-codrin.ciubotariu@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 28 Feb 2022 07:50:14 +0000 (10:50 +0300)]
clk: imx: off by one in imx_lpcg_parse_clks_from_dt()
[ Upstream commit
135efc3a76d127691afaf1864e4ab627bf09d53d ]
The > needs to be >= to prevent an off by one access.
Fixes:
d5f1e6a2bb61 ("clk: imx: imx8qxp-lpcg: add parsing clocks from device tree")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220228075014.GD13685@kili
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Abel Vesa [Thu, 27 Jan 2022 14:10:52 +0000 (16:10 +0200)]
clk: imx7d: Remove audio_mclk_root_clk
[ Upstream commit
eccac77ede3946c90143447cdc785dc16aec4b24 ]
The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. The
CCGR121 belongs to ECSPI2 and it is not shared.
Fixes:
8f6d8094b215b57 ("ARM: imx: add imx7d clk tree support")
Reported-by: David Wolfe <david.wolfe@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220127141052.1900174-2-abel.vesa@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Mon, 28 Feb 2022 22:04:53 +0000 (14:04 -0800)]
dma-debug: fix return value of __setup handlers
[ Upstream commit
80e4390981618e290616dbd06ea190d4576f219d ]
When valid kernel command line parameters
dma_debug=off dma_debug_entries=100
are used, they are reported as Unknown parameters and added to init's
environment strings, polluting it.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off dma_debug_entries=100", will be passed to user space.
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off
dma_debug_entries=100
Return 1 from these __setup handlers to indicate that the command line
option has been handled.
Fixes:
59d3daafa1726 ("dma-debug: add kernel command line parameters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/
64644a2f-4a20-bab3-1e15-
3b2cdd0defe3@omprussia.ru
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: iommu@lists.linux-foundation.org
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Kaiser [Sat, 26 Feb 2022 18:14:53 +0000 (19:14 +0100)]
staging: r8188eu: fix endless loop in recv_func
[ Upstream commit
1327fcf175fa63d3b7a058b8148ed7714acdc035 ]
Fix an endless loop in recv_func. If pending_frame is not NULL, we're
stuck in the while loop forever. We have to call rtw_alloc_recvframe
each time we loop.
Fixes:
15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver")
Reported-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220226181457.1138035-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Thu, 24 Feb 2022 15:59:37 +0000 (10:59 -0500)]
NFS: Return valid errors from nfs2/3_decode_dirent()
[ Upstream commit
64cfca85bacde54caa64e0ab855c48734894fa37 ]
Valid return values for decode_dirent() callback functions are:
0: Success
-EBADCOOKIE: End of directory
-EAGAIN: End of xdr_stream
All errors need to map into one of those three values.
Fixes:
573c4e1ef53a ("NFS: Simplify ->decode_dirent() calling sequence")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Thu, 24 Feb 2022 06:58:05 +0000 (14:58 +0800)]
habanalabs: Add check for pci_enable_device
[ Upstream commit
9c27896ac1bb83ea5c461ce6f7089d02102a2b21 ]
As the potential failure of the pci_enable_device(),
it should be better to check the return value and return
error if fails.
Fixes:
70b2f993ea4a ("habanalabs: create common folder")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Thu, 24 Feb 2022 06:28:49 +0000 (14:28 +0800)]
iio: adc: Add check for devm_request_threaded_irq
[ Upstream commit
b30537a4cedcacf0ade2f33ebb7610178ed1e7d7 ]
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value and return
error if fails.
Fixes:
fa659a40b80b ("iio: adc: twl6030-gpadc: Use devm_* API family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220224062849.3280966-1-jiasheng@iscas.ac.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Tue, 15 Feb 2022 16:02:36 +0000 (17:02 +0100)]
serial: 8250: Fix race condition in RTS-after-send handling
[ Upstream commit
dedab69fd650ea74710b2e626e63fd35584ef773 ]
Set em485->active_timer = NULL isn't always enough to take out the stop
timer. While there is a check that it acts in the right state (i.e.
waiting for RTS-after-send to pass after sending some chars) but the
following might happen:
- CPU1: some chars send, shifter becomes empty, stop tx timer armed
- CPU0: more chars send before RTS-after-send expired
- CPU0: shifter empty irq, port lock taken
- CPU1: tx timer triggers, waits for port lock
- CPU0: em485->active_timer = &em485->stop_tx_timer, hrtimer_start(),
releases lock()
- CPU1: get lock, see em485->active_timer == &em485->stop_tx_timer,
tear down RTS too early
This fix bases on research done by Steffen Trumtrar.
Fixes:
b86f86e8e7c5 ("serial: 8250: fix potential deadlock in rs485-mode")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220215160236.344236-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Tue, 15 Feb 2022 20:58:38 +0000 (15:58 -0500)]
NFS: Use of mapping_set_error() results in spurious errors
[ Upstream commit
6c984083ec2453dfd3fcf98f392f34500c73e3f2 ]
The use of mapping_set_error() in conjunction with calls to
filemap_check_errors() is problematic because every error gets reported
as either an EIO or an ENOSPC by filemap_check_errors() in functions
such as filemap_write_and_wait() or filemap_write_and_wait_range().
In almost all cases, we prefer to use the more nuanced wb errors.
Fixes:
b8946d7bfb94 ("NFS: Revalidate the file mapping on all fatal writeback errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Wed, 23 Feb 2022 15:12:40 +0000 (17:12 +0200)]
serial: 8250_lpss: Balance reference count for PCI DMA device
[ Upstream commit
5318f70da7e82649d794fc27d8a127c22aa3566e ]
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes:
9a1870ce812e ("serial: 8250: don't use slave_id of dma_slave_config")
Depends-on:
a13e19cf3dc1 ("serial: 8250_lpss: split LPSS driver to separate module")
Reported-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220223151240.70248-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Tue, 15 Feb 2022 10:09:20 +0000 (12:09 +0200)]
serial: 8250_mid: Balance reference count for PCI DMA device
[ Upstream commit
67ec6dd0b257bd81b4e9fcac89b29da72f6265e5 ]
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes:
90b9aacf912a ("serial: 8250_pci: add Intel Tangier support")
Fixes:
f549e94effa1 ("serial: 8250_pci: add Intel Penwell ports")
Reported-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Depends-on:
d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its own driver")
Link: https://lore.kernel.org/r/20220215100920.41984-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Fri, 18 Feb 2022 17:24:59 +0000 (18:24 +0100)]
phy: phy-brcm-usb: fixup BCM4908 support
[ Upstream commit
32942d33d63d27714ed16a4176e5a99547adb6e0 ]
Just like every other family BCM4908 should get its own enum value. That
is required to properly handle it in chipset conditional code.
The real change is excluding BCM4908 from the PLL reprogramming code
(see brcmusb_usb3_pll_54mhz()). I'm not sure what's the BCM4908
reference clock frequency but:
1. BCM4908 custom driver from Broadcom's SDK doesn't reprogram PLL
2. Doing that in Linux driver stopped PHY handling some USB 3.0 devices
This change makes USB 3.0 PHY recognize e.g.:
1. 04e8:6860 - Samsung Electronics Co., Ltd Galaxy series, misc. (MTP mode)
2. 1058:259f - Western Digital My Passport 259F
Broadcom's STB SoCs come with a set of SUN_TOP_CTRL_* registers that
allow reading chip family and product ids. Such a block & register is
missing on BCM4908 so this commit introduces "compatible" string
specific binding.
Fixes:
4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220218172459.10431-1-zajec5@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Ying [Wed, 16 Feb 2022 07:12:57 +0000 (15:12 +0800)]
phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})
[ Upstream commit
3153fa38e38af566cf6454a03b1dbadaf6f323c0 ]
According to the comment of the function phy_mipi_dphy_get_default_config(),
it uses minimum D-PHY timings based on MIPI D-PHY specification. They are
derived from the valid ranges specified in Section 6.9, Table 14, Page 41
of the D-PHY specification (v1.2). The table 14 explicitly mentions that
the minimum T-LPX parameter is 50 nanoseconds and the minimum TA-SURE
parameter is T-LPX nanoseconds. Likewise, the kernel doc of the 'lpx' and
'ta_sure' members of struct phy_configure_opts_mipi_dphy mentions that
the minimum values are 50000 picoseconds and @lpx picoseconds respectively.
Also, the function phy_mipi_dphy_config_validate() checks if cfg->lpx is
less than 50000 picoseconds and if cfg->ta_sure is less than cfg->lpx,
which hints the same minimum values.
Without this patch, the function phy_mipi_dphy_get_default_config()
wrongly sets cfg->lpx to 60000 picoseconds and cfg->ta_sure to 2 * cfg->lpx.
So, let's correct them to 50000 picoseconds and cfg->lpx respectively.
Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.
Fixes:
dddc97e82303 ("phy: dphy: Add configuration helpers")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220216071257.1647703-1-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dirk Buchwalder [Thu, 10 Feb 2022 17:31:00 +0000 (18:31 +0100)]
clk: qcom: ipq8074: Use floor ops for SDCC1 clock
[ Upstream commit
b77d8306d84f83d1da68028a68c91da9c867b6f6 ]
Use floor ops on SDCC1 APPS clock in order to round down selected clock
frequency and avoid overclocking SD/eMMC cards.
For example, currently HS200 cards were failling tuning as they were
actually being clocked at 384MHz instead of 192MHz.
This caused some boards to disable 1.8V I/O and force the eMMC into the
standard HS mode (50MHz) and that appeared to work despite the eMMC being
overclocked to 96Mhz in that case.
There was a previous commit to use floor ops on SDCC clocks, but it looks
to have only covered SDCC2 clock.
Fixes:
9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220210173100.505128-1-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 21 Feb 2022 16:21:58 +0000 (17:21 +0100)]
pinctrl: renesas: checker: Fix miscalculation of number of states
[ Upstream commit
de9b861018d46af27a5edff8b6baef35c0c0ad4f ]
The checker failed to validate all enum IDs in the description of a
register with fixed-width register fields, due to a miscalculation of
the number of described states: each register field of n bits can have
"1 << n" possible states, not "1".
Increase SH_PFC_MAX_ENUMS accordingly, now more enum IDs are checked
(SH-Mobile AG5 has more than 4000 enum IDs defined).
Fixes:
12d057bad683b1c6 ("pinctrl: sh-pfc: checker: Add check for enum ID conflicts")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6d8a6a05564f38f9d20464c1c17f96e52740cf6a.1645460429.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 23 Dec 2021 14:41:11 +0000 (15:41 +0100)]
pinctrl: renesas: r8a77470: Reduce size for narrow VIN1 channel
[ Upstream commit
9e04a0eda84fccab0ac22a33825ad53f47c968c7 ]
The second video-in channel on RZ/G1C has only 12 data lanes, but the
pin control driver uses the vin_data union, which is meant for 24 data
lanes, thus wasting space.
Fix this by using the vin_data12 union instead.
This reduces kernel size by 96 bytes.
Fixes:
50f3f2d73e3426ba ("pinctrl: sh-pfc: Reduce kernel size for narrow VIN channels")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/52716fa89139f6f92592633edb52804d4c5e18f0.1640269757.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Cameron [Sun, 6 Feb 2022 19:03:09 +0000 (19:03 +0000)]
staging:iio:adc:ad7280a: Fix handing of device address bit reversing.
[ Upstream commit
f281e4ddbbc0b60f061bc18a2834e9363ba85f9f ]
The bit reversal was wrong for bits 1 and 3 of the 5 bits.
Result is driver failure to probe if you have more than 2 daisy-chained
devices. Discovered via QEMU based device emulation.
Fixes tag is for when this moved from a macro to a function, but it
was broken before that.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes:
065a7c0b1fec ("Staging: iio: adc: ad7280a.c: Fixed Macro argument reuse")
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/20220206190328.333093-2-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zev Weiss [Fri, 11 Feb 2022 00:42:03 +0000 (16:42 -0800)]
serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
[ Upstream commit
a603ca60cebff8589882427a67f870ed946b3fc8 ]
Commit
54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to
set up register mapping") fixed a bug that had, as a side-effect,
prevented the 8250_aspeed_vuart driver from enabling the VUART's
FIFOs. However, fixing that (and hence enabling the FIFOs) has in
turn revealed what appears to be a hardware bug in the ASPEED VUART in
which the host-side THRE bit doesn't get if the BMC-side receive FIFO
trigger level is set to anything but one byte. This causes problems
for polled-mode writes from the host -- for example, Linux kernel
console writes proceed at a glacial pace (less than 100 bytes per
second) because the write path waits for a 10ms timeout to expire
after every character instead of being able to continue on to the next
character upon seeing THRE asserted. (GRUB behaves similarly.)
As a workaround, introduce a new port type for the ASPEED VUART that's
identical to PORT_16550A as it had previously been using, but with
UART_FCR_R_TRIG_00 instead to set the receive FIFO trigger level to
one byte, which (experimentally) seems to avoid the problematic THRE
behavior.
Fixes:
54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping")
Tested-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20220211004203.14915-1-zev@bewilderbeest.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Tue, 8 Feb 2022 12:43:35 +0000 (13:43 +0100)]
iio: mma8452: Fix probe failing when an i2c_device_id is used
[ Upstream commit
a47ac019e7e8129b93a0b991e04b2a59872e053d ]
The mma8452_driver declares both of_match_table and i2c_driver.id_table
match-tables, but its probe() function only checked for of matches.
Add support for i2c_device_id matches. This fixes the driver not loading
on some x86 tablets (e.g. the Nextbook Ares 8) where the i2c_client is
instantiated by platform code using an i2c_device_id.
Drop of_match_ptr() protection to avoid unused warning.
Fixes:
c3cdd6e48e35 ("iio: mma8452: refactor for seperating chip specific data")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220208124336.511884-1-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Jiang [Mon, 24 Jan 2022 16:20:33 +0000 (09:20 -0700)]
dmaengine: idxd: restore traffic class defaults after wq reset
[ Upstream commit
ea7c8f598c323f6ebaf9ddae01fb2a981fe8c56a ]
When clearing the group configurations, the driver fails to restore the
default setting for DSA 1.x based devices. Add defaults in
idxd_groups_clear_state() for traffic class configuration.
Fixes:
ade8a86b512c ("dmaengine: idxd: Set defaults for GRPCFG traffic class")
Reported-by: Binuraj Ravindran <binuraj.ravindran@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164304123369.824298.6952463420266592087.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Jiang [Tue, 14 Dec 2021 20:23:09 +0000 (13:23 -0700)]
dmaengine: idxd: change bandwidth token to read buffers
[ Upstream commit
7ed6f1b85fb613e5e44ef3e14d73f2dc96860935 ]
DSA spec v1.2 has changed the term of "bandwidth tokens" to "read buffers"
in order to make the concept clearer. Deprecate bandwidth token
naming in the driver and convert to read buffers in order to match with
the spec and reduce confusion when reading the spec.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951338932.2988321.6162640806935567317.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Jiang [Tue, 12 Oct 2021 18:01:59 +0000 (11:01 -0700)]
dmaengine: idxd: check GENCAP config support for gencfg register
[ Upstream commit
79c4c3db7d86b9bec94562275efc82e58f3d0132 ]
DSA spec 1.2 has moved the GENCFG register under the GENCAP configuration
support with respect to writability. Add check in driver before writing to
GENCFG register.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163406171896.1303830.11217958011385656998.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Marko [Mon, 20 Dec 2021 11:41:19 +0000 (12:41 +0100)]
clk: qcom: ipq8074: fix PCI-E clock oops
[ Upstream commit
bf8f5182b8f59309809b41c1d1730ed9ca6134b1 ]
Fix PCI-E clock related kernel oops that are caused by a missing clock
parent.
pcie0_rchng_clk_src has num_parents set to 2 but only one parent is
actually set via parent_hws, it should also have "XO" defined.
This will cause the kernel to panic on a NULL pointer in
clk_core_get_parent_by_index().
So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent
data.
Since there is already an existing static const char * const gcc_xo_gpll0[]
used to provide the same parents via parent_names convert those users to
clk_parent_data as well.
Without this earlycon is needed to even catch the OOPS as it will reset
the board before serial is initialized with the following:
[ 0.232279] Unable to handle kernel paging request at virtual address
0000a00000000000
[ 0.232322] Mem abort info:
[ 0.239094] ESR = 0x96000004
[ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.244908] SET = 0, FnV = 0
[ 0.250377] EA = 0, S1PTW = 0
[ 0.253236] FSC = 0x04: level 0 translation fault
[ 0.256277] Data abort info:
[ 0.261141] ISV = 0, ISS = 0x00000004
[ 0.264262] CM = 0, WnR = 0
[ 0.267820] [
0000a00000000000] address between user and kernel address ranges
[ 0.270954] Internal error: Oops:
96000004 [#1] SMP
[ 0.278067] Modules linked in:
[ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0
[ 0.285882] Hardware name: Xiaomi AX3600 (DT)
[ 0.292043] pstate:
20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec
[ 0.303067] lr : __clk_register+0x1d8/0x820
[ 0.308273] sp :
ffffffc01111b7d0
[ 0.312438] x29:
ffffffc01111b7d0 x28:
0000000000000000 x27:
0000000000000040
[ 0.315919] x26:
0000000000000002 x25:
0000000000000000 x24:
ffffff8000308800
[ 0.323037] x23:
ffffff8000308850 x22:
ffffff8000308880 x21:
ffffff8000308828
[ 0.330155] x20:
0000000000000028 x19:
ffffff8000309700 x18:
0000000000000020
[ 0.337272] x17:
000000005cc86990 x16:
0000000000000004 x15:
ffffff80001d9d0a
[ 0.344391] x14:
0000000000000000 x13:
0000000000000000 x12:
0000000000000006
[ 0.351508] x11:
0000000000000003 x10:
0101010101010101 x9 :
0000000000000000
[ 0.358626] x8 :
7f7f7f7f7f7f7f7f x7 :
6468626f5e626266 x6 :
17000a3a403c1b06
[ 0.365744] x5 :
061b3c403a0a0017 x4 :
0000000000000000 x3 :
0000000000000001
[ 0.372863] x2 :
0000a00000000000 x1 :
0000000000000001 x0 :
ffffff8000309700
[ 0.379982] Call trace:
[ 0.387091] clk_core_get_parent_by_index+0x68/0xec
[ 0.389351] __clk_register+0x1d8/0x820
[ 0.394210] devm_clk_hw_register+0x5c/0xe0
[ 0.398030] devm_clk_register_regmap+0x44/0x8c
[ 0.402198] qcom_cc_really_probe+0x17c/0x1d0
[ 0.406711] qcom_cc_probe+0x34/0x44
[ 0.411224] gcc_ipq8074_probe+0x18/0x30
[ 0.414869] platform_probe+0x68/0xe0
[ 0.418776] really_probe.part.0+0x9c/0x30c
[ 0.422336] __driver_probe_device+0x98/0x144
[ 0.426329] driver_probe_device+0x44/0x11c
[ 0.430842] __device_attach_driver+0xb4/0x120
[ 0.434836] bus_for_each_drv+0x68/0xb0
[ 0.439349] __device_attach+0xb0/0x170
[ 0.443081] device_initial_probe+0x14/0x20
[ 0.446901] bus_probe_device+0x9c/0xa4
[ 0.451067] device_add+0x35c/0x834
[ 0.454886] of_device_add+0x54/0x64
[ 0.458360] of_platform_device_create_pdata+0xc0/0x100
[ 0.462181] of_platform_bus_create+0x114/0x370
[ 0.467128] of_platform_bus_create+0x15c/0x370
[ 0.471641] of_platform_populate+0x50/0xcc
[ 0.476155] of_platform_default_populate_init+0xa8/0xc8
[ 0.480324] do_one_initcall+0x50/0x1b0
[ 0.485877] kernel_init_freeable+0x234/0x29c
[ 0.489436] kernel_init+0x24/0x120
[ 0.493948] ret_from_fork+0x10/0x20
[ 0.497253] Code:
d50323bf d65f03c0 f94002a2 b4000302 (
f9400042)
[ 0.501079] ---[ end trace
4ca7e1129da2abce ]---
Fixes:
f0cfcf1a ("clk: qcom: ipq8074: Add missing clocks for pcie")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211220114119.465247-1-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Libin Yang [Wed, 26 Jan 2022 01:14:51 +0000 (09:14 +0800)]
soundwire: intel: fix wrong register name in intel_shim_wake
[ Upstream commit
3957db3ae3dae6f8b8168791f154567fe49e1fd7 ]
When clearing the sdw wakests status, we should use SDW_SHIM_WAKESTS.
Fixes:
4a17c441c7cb ("soundwire: intel: revisit SHIM programming sequences.")
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011451.27853-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luca Weiss [Sun, 30 Jan 2022 11:45:35 +0000 (12:45 +0100)]
cpufreq: qcom-cpufreq-nvmem: fix reading of PVS Valid fuse
[ Upstream commit
4a8a77abf0e2b6468ba0281e33384cbec5fb476a ]
The fuse consists of 64 bits, with this statement we're supposed to get
the upper 32 bits but it actually read out of bounds and got 0 instead
of the desired value which lead to the "PVS bin not set." codepath being
run resetting our pvs value.
Fixes:
a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 6 Feb 2022 08:39:54 +0000 (09:39 +0100)]
misc: alcor_pci: Fix an error handling path
[ Upstream commit
5b3dc949f554379edcb8ef6111aa5ecb78feb798 ]
A successful ida_simple_get() should be balanced by a corresponding
ida_simple_remove().
Add the missing call in the error handling path of the probe.
While at it, switch to ida_alloc()/ida_free() instead to
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Fixes:
4f556bc04e3c ("misc: cardreader: add new Alcor Micro Cardreader PCI driver")
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/918a9875b7f67b7f8f123c4446452603422e8c5e.1644136776.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 9 Jan 2022 21:56:10 +0000 (22:56 +0100)]
fsi: Aspeed: Fix a potential double free
[ Upstream commit
83ba7e895debc529803a7a258653f2fe9bf3bf40 ]
A struct device can never be devm_alloc()'ed.
Here, it is embedded in "struct fsi_master", and "struct fsi_master" is
embedded in "struct fsi_master_aspeed".
Since "struct device" is embedded, the data structure embedding it must be
released with the release function, as is already done here.
So use kzalloc() instead of devm_kzalloc() when allocating "aspeed" and
update all error handling branches accordingly.
This prevent a potential double free().
This also fix another issue if opb_readl() fails. Instead of a direct
return, it now jumps in the error handling path.
Fixes:
606397d67f41 ("fsi: Add ast2600 master driver")
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2c123f8b0a40dc1a061fae982169fe030b4f47e6.1641765339.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Hancock [Wed, 12 Jan 2022 20:52:14 +0000 (14:52 -0600)]
pps: clients: gpio: Propagate return value from pps_gpio_probe
[ Upstream commit
abaca3179b41d4b3b115f27814ee36f6fb45e897 ]
If the pps-gpio driver was probed prior to the GPIO device it uses, the
devm_gpiod_get call returned an -EPROBE_DEFER error, but pps_gpio_probe
replaced that error code with -EINVAL, causing the pps-gpio probe to
fail and not be retried later. Propagate the error return value so that
deferred probe works properly.
Fixes:
161520451dfa (pps: new client driver using GPIO)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/20220112205214.2060954-1-robert.hancock@calian.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Wed, 10 Nov 2021 08:49:48 +0000 (09:49 +0100)]
pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()
[ Upstream commit
0401f24cd238ae200a23a13925f98de3d2c883b8 ]
When a driver calls pwmchip_add() it has to be prepared to immediately
get its callbacks called. So move allocation of driver data and hardware
initialization before the call to pwmchip_add().
This fixes a potential NULL pointer exception and a race condition on
register writes.
Fixes:
841e6f90bb78 ("pwm: NXP LPC18xx PWM/SCT driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Stanley [Tue, 7 Dec 2021 03:38:11 +0000 (14:08 +1030)]
fsi: scom: Remove retries in indirect scoms
[ Upstream commit
ab1b79159ad5a6dc4e4994b49737f7feb13b7155 ]
In commit
f72ddbe1d7b7 ("fsi: scom: Remove retries") the retries were
removed from get and put scoms. That patch missed the retires in get and
put indirect scom.
For the same reason, remove them from the scom driver to allow the
caller to decide to retry.
This removes the following special case which would have caused the
retry code to return early:
- if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
- return 0;
I believe this case is handled.
Fixes:
f72ddbe1d7b7 ("fsi: scom: Remove retries")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211207033811.518981-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Stanley [Tue, 7 Dec 2021 03:38:10 +0000 (14:08 +1030)]
fsi: scom: Fix error handling
[ Upstream commit
d46fddd52d11eb6a3a7ed836f9f273e9cf8cd01c ]
SCOM error handling is made complex by trying to pass around two bits of
information: the function return code, and a status parameter that
represents the CFAM error status register.
The commit
f72ddbe1d7b7 ("fsi: scom: Remove retries") removed the
"hidden" retries in the SCOM driver, in preference of allowing the
calling code (userspace or driver) to decide how to handle a failed
SCOM. However it introduced a bug by attempting to be smart about the
return codes that were "errors" and which were ok to fall through to the
status register parsing.
We get the following errors:
- EINVAL or ENXIO, for indirect scoms where the value is invalid
- EINVAL, where the size or address is incorrect
- EIO or ETIMEOUT, where FSI write failed (aspeed master)
- EAGAIN, where the master detected a crc error (GPIO master only)
- EBUSY, where the bus is disabled (GPIO master in external mode)
In all of these cases we should fail the SCOM read/write and return the
error.
Thanks to Dan Carpenter for the detailed bug report.
Fixes:
f72ddbe1d7b7 ("fsi: scom: Remove retries")
Link: https://lists.ozlabs.org/pipermail/linux-fsi/2021-November/000235.html
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211207033811.518981-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Slaby [Mon, 24 Jan 2022 07:14:24 +0000 (08:14 +0100)]
mxser: fix xmit_buf leak in activate when LSR == 0xff
[ Upstream commit
cd3a4907ee334b40d7aa880c7ab310b154fd5cd4 ]
When LSR is 0xff in ->activate() (rather unlike), we return an error.
Provided ->shutdown() is not called when ->activate() fails, nothing
actually frees the buffer in this case.
Fix this by properly freeing the buffer in a designated label. We jump
there also from the "!info->type" if now too.
Fixes:
6769140d3047 ("tty: mxser: use the tty_port_open method")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220124071430.14907-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Straube [Fri, 7 Jan 2022 10:36:04 +0000 (11:36 +0100)]
staging: r8188eu: release_firmware is not called if allocation fails
[ Upstream commit
39850edf2befe27bcb3d6c37b6ee76d2ee4df903 ]
In function load_firmware() release_firmware() is not called if the
allocation of pFirmware->szFwBuffer fails or if fw->size is greater
than FW_8188E_SIZE.
Move the call to release_firmware() to the exit label at the end of
the function to fix this.
Fixes:
8cd574e6af54 ("staging: r8188eu: introduce new hal dir for RTL8188eu driver")
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220107103620.15648-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Phillip Potter [Mon, 29 Nov 2021 00:20:39 +0000 (00:20 +0000)]
staging: r8188eu: convert DBG_88E_LEVEL call in hal/rtl8188e_hal_init.c
[ Upstream commit
5ec394d58bdba731c2a33645be7018e71f72f287 ]
Convert DBG_88E_LEVEL macro call in hal/rtl8188e_hal_init.c to plain
dev_dbg call, as although the information is potentially useful, we should
be exposing it using standard kernel debugging functionality.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20211129002041.865-6-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaohe Lin [Wed, 23 Mar 2022 23:07:18 +0000 (16:07 -0700)]
kernel/resource: fix kfree() of bootmem memory again
[ Upstream commit
0cbcc92917c5de80f15c24d033566539ad696892 ]
Since commit
ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem
memory"), we could get a resource allocated during boot via
alloc_resource(). And it's required to release the resource using
free_resource(). Howerver, many people use kfree directly which will
result in kernel BUG. In order to fix this without fixing every call
site, just leak a couple of bytes in such corner case.
Link: https://lkml.kernel.org/r/20220217083619.19305-1-linmiaohe@huawei.com
Fixes:
ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem memory")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sondhauß, Jan [Wed, 23 Mar 2022 08:47:33 +0000 (08:47 +0000)]
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
[ Upstream commit
2844e2434385819f674d1fb4130c308c50ba681e ]
cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync
when successful.
pm_runtime_get_sync returns -error code on failure and 0 on successful
resume but also 1 when the device is already active. So the common case
for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls
to pm_runtime_put in the call-chain so that pm_runtime_put is called
one too many times and as result leaving the cpsw dev behind suspended.
The suspended cpsw dev leads to an access violation later on by
different parts of the cpsw driver.
Fix this by calling the return-friendly pm_runtime_resume_and_get
function.
Fixes:
d43c65b05b84 ("ethtool: runtime-resume netdev parent in ethnl_ops_begin")
Signed-off-by: Jan Sondhauss <jan.sondhauss@wago.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20220323084725.65864-1-jan.sondhauss@wago.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Lobakin [Wed, 23 Mar 2022 12:43:53 +0000 (13:43 +0100)]
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
[ Upstream commit
5a3156932da06f09953764de113419f254086faf ]
ice_send_event_to_aux() eventually descends to mutex_lock()
(-> might_sched()), so it must not be called under non-task
context. However, at least two fixes have happened already for the
bug splats occurred due to this function being called from atomic
context.
To make the emergency landings softer, bail out early when executed
in non-task context emitting a warn splat only once. This way we
trade some events being potentially lost for system stability and
avoid any related hangs and crashes.
Fixes:
348048e724a0e ("ice: Implement iidc operations")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Lobakin [Wed, 23 Mar 2022 12:43:52 +0000 (13:43 +0100)]
ice: fix 'scheduling while atomic' on aux critical err interrupt
[ Upstream commit
32d53c0aa3a7b727243473949bad2a830b908edc ]
There's a kernel BUG splat on processing aux critical error
interrupts in ice_misc_intr():
[ 2100.917085] BUG: scheduling while atomic: swapper/15/0/0x00010000
...
[ 2101.060770] Call Trace:
[ 2101.063229] <IRQ>
[ 2101.065252] dump_stack+0x41/0x60
[ 2101.068587] __schedule_bug.cold.100+0x4c/0x58
[ 2101.073060] __schedule+0x6a4/0x830
[ 2101.076570] schedule+0x35/0xa0
[ 2101.079727] schedule_preempt_disabled+0xa/0x10
[ 2101.084284] __mutex_lock.isra.7+0x310/0x420
[ 2101.088580] ? ice_misc_intr+0x201/0x2e0 [ice]
[ 2101.093078] ice_send_event_to_aux+0x25/0x70 [ice]
[ 2101.097921] ice_misc_intr+0x220/0x2e0 [ice]
[ 2101.102232] __handle_irq_event_percpu+0x40/0x180
[ 2101.106965] handle_irq_event_percpu+0x30/0x80
[ 2101.111434] handle_irq_event+0x36/0x53
[ 2101.115292] handle_edge_irq+0x82/0x190
[ 2101.119148] handle_irq+0x1c/0x30
[ 2101.122480] do_IRQ+0x49/0xd0
[ 2101.125465] common_interrupt+0xf/0xf
[ 2101.129146] </IRQ>
...
As Andrew correctly mentioned previously[0], the following call
ladder happens:
ice_misc_intr() <- hardirq
ice_send_event_to_aux()
device_lock()
mutex_lock()
might_sleep()
might_resched() <- oops
Add a new PF state bit which indicates that an aux critical error
occurred and serve it in ice_service_task() in process context.
The new ice_pf::oicr_err_reg is read-write in both hardirq and
process contexts, but only 3 bits of non-critical data probably
aren't worth explicit synchronizing (and they're even in the same
byte [31:24]).
[0] https://lore.kernel.org/all/YeSRUVmrdmlUXHDn@lunn.ch
Fixes:
348048e724a0e ("ice: Implement iidc operations")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 7 Mar 2022 07:29:47 +0000 (07:29 +0000)]
mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
[ Upstream commit
e84ee1a75f944a0fe3c277aaa10c426603d2b0bc ]
Add the missing iounmap() before return from asic3_mfd_probe
in the error handling case.
Fixes:
64e8867ba809 ("mfd: tmio_mmc hardware abstraction for CNF area")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220307072947.5369-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hoang Le [Mon, 21 Mar 2022 04:22:29 +0000 (11:22 +0700)]
tipc: fix the timer expires after interval 100ms
[ Upstream commit
6a7d8cff4a3301087dd139293e9bddcf63827282 ]
In the timer callback function tipc_sk_timeout(), we're trying to
reschedule another timeout to retransmit a setup request if destination
link is congested. But we use the incorrect timeout value
(msecs_to_jiffies(100)) instead of (jiffies + msecs_to_jiffies(100)),
so that the timer expires immediately, it's irrelevant for original
description.
In this commit we correct the timeout value in sk_reset_timer()
Fixes:
6787927475e5 ("tipc: buffer overflow handling in listener socket")
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20220321042229.314288-1-hoang.h.le@dektech.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Fri, 18 Mar 2022 19:54:43 +0000 (21:54 +0200)]
net: dsa: fix panic on shutdown if multi-chip tree failed to probe
[ Upstream commit
8fd36358ce82382519b50b05f437493e1e00c4a9 ]
DSA probing is atypical because a tree of devices must probe all at
once, so out of N switches which call dsa_tree_setup_routing_table()
during probe, for (N - 1) of them, "complete" will return false and they
will exit probing early. The Nth switch will set up the whole tree on
their behalf.
The implication is that for (N - 1) switches, the driver binds to the
device successfully, without doing anything. When the driver is bound,
the ->shutdown() method may run. But if the Nth switch has failed to
initialize the tree, there is nothing to do for the (N - 1) driver
instances, since the slave devices have not been created, etc. Moreover,
dsa_switch_shutdown() expects that the calling @ds has been in fact
initialized, so it jumps at dereferencing the various data structures,
which is incorrect.
Avoid the ensuing NULL pointer dereferences by simply checking whether
the Nth switch has previously set "ds->setup = true" for the switch
which is currently shutting down. The entire setup is serialized under
dsa2_mutex which we already hold.
Fixes:
0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220318195443.275026-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaron Conole [Fri, 18 Mar 2022 12:43:19 +0000 (08:43 -0400)]
openvswitch: always update flow key after nat
[ Upstream commit
60b44ca6bd7518dd38fa2719bc9240378b6172c3 ]
During NAT, a tuple collision may occur. When this happens, openvswitch
will make a second pass through NAT which will perform additional packet
modification. This will update the skb data, but not the flow key that
OVS uses. This means that future flow lookups, and packet matches will
have incorrect data. This has been supported since
5d50aa83e2c8 ("openvswitch: support asymmetric conntrack").
That commit failed to properly update the sw_flow_key attributes, since
it only called the ovs_ct_nat_update_key once, rather than each time
ovs_ct_nat_execute was called. As these two operations are linked, the
ovs_ct_nat_execute() function should always make sure that the
sw_flow_key is updated after a successful call through NAT infrastructure.
Fixes:
5d50aa83e2c8 ("openvswitch: support asymmetric conntrack")
Cc: Dumitru Ceara <dceara@redhat.com>
Cc: Numan Siddique <nusiddiq@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220318124319.3056455-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Kicinski [Mon, 21 Mar 2022 16:59:57 +0000 (09:59 -0700)]
tcp: ensure PMTU updates are processed during fastopen
[ Upstream commit
ed0c99dc0f499ff8b6e75b5ae6092ab42be1ad39 ]
tp->rx_opt.mss_clamp is not populated, yet, during TFO send so we
rise it to the local MSS. tp->mss_cache is not updated, however:
tcp_v6_connect():
tp->rx_opt.mss_clamp = IPV6_MIN_MTU - headers;
tcp_connect():
tcp_connect_init():
tp->mss_cache = min(mtu, tp->rx_opt.mss_clamp)
tcp_send_syn_data():
tp->rx_opt.mss_clamp = tp->advmss
After recent fixes to ICMPv6 PTB handling we started dropping
PMTU updates higher than tp->mss_cache. Because of the stale
tp->mss_cache value PMTU updates during TFO are always dropped.
Thanks to Wei for helping zero in on the problem and the fix!
Fixes:
c7bb4b89033b ("ipv6: tcp: drop silly ICMPv6 packet too big messages")
Reported-by: Andre Nash <alnash@fb.com>
Reported-by: Neil Spring <ntspring@fb.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220321165957.1769954-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeremy Linton [Thu, 10 Mar 2022 04:53:58 +0000 (22:53 -0600)]
net: bcmgenet: Use stronger register read/writes to assure ordering
[ Upstream commit
8d3ea3d402db94b61075617e71b67459a714a502 ]
GCC12 appears to be much smarter about its dependency tracking and is
aware that the relaxed variants are just normal loads and stores and
this is causing problems like:
[ 210.074549] ------------[ cut here ]------------
[ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out
[ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240
[ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat]
[ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110
[ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58
[ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters
[ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022
[ 210.161353] pstate:
80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 210.161358] pc : dev_watchdog+0x234/0x240
[ 210.161364] lr : dev_watchdog+0x234/0x240
[ 210.161368] sp :
ffff8000080a3a40
[ 210.161370] x29:
ffff8000080a3a40 x28:
ffffcd425af87000 x27:
ffff8000080a3b20
[ 210.205150] x26:
ffffcd425aa00000 x25:
0000000000000001 x24:
ffffcd425af8ec08
[ 210.212321] x23:
0000000000000100 x22:
ffffcd425af87000 x21:
ffff55b142688000
[ 210.219491] x20:
0000000000000001 x19:
ffff55b1426884c8 x18:
ffffffffffffffff
[ 210.226661] x17:
64656d6974203120 x16:
0000000000000001 x15:
6d736e617274203a
[ 210.233831] x14:
2974656e65676d63 x13:
ffffcd4259c300d8 x12:
ffffcd425b07d5f0
[ 210.241001] x11:
00000000ffffffff x10:
ffffcd425b07d5f0 x9 :
ffffcd4258bdad9c
[ 210.248171] x8 :
00000000ffffdfff x7 :
000000000000003f x6 :
0000000000000000
[ 210.255341] x5 :
0000000000000000 x4 :
0000000000000000 x3 :
0000000000001000
[ 210.262511] x2 :
0000000000001000 x1 :
0000000000000005 x0 :
0000000000000044
[ 210.269682] Call trace:
[ 210.272133] dev_watchdog+0x234/0x240
[ 210.275811] call_timer_fn+0x3c/0x15c
[ 210.279489] __run_timers.part.0+0x288/0x310
[ 210.283777] run_timer_softirq+0x48/0x80
[ 210.287716] __do_softirq+0x128/0x360
[ 210.291392] __irq_exit_rcu+0x138/0x140
[ 210.295243] irq_exit_rcu+0x1c/0x30
[ 210.298745] el1_interrupt+0x38/0x54
[ 210.302334] el1h_64_irq_handler+0x18/0x24
[ 210.306445] el1h_64_irq+0x7c/0x80
[ 210.309857] arch_cpu_idle+0x18/0x2c
[ 210.313445] default_idle_call+0x4c/0x140
[ 210.317470] cpuidle_idle_call+0x14c/0x1a0
[ 210.321584] do_idle+0xb0/0x100
[ 210.324737] cpu_startup_entry+0x30/0x8c
[ 210.328675] secondary_start_kernel+0xe4/0x110
[ 210.333138] __secondary_switched+0x94/0x98
The assumption when these were relaxed seems to be that device memory
would be mapped non reordering, and that other constructs
(spinlocks/etc) would provide the barriers to assure that packet data
and in memory rings/queues were ordered with respect to device
register reads/writes. This itself seems a bit sketchy, but the real
problem with GCC12 is that it is moving the actual reads/writes around
at will as though they were independent operations when in truth they
are not, but the compiler can't know that. When looking at the
assembly dumps for many of these routines its possible to see very
clean, but not strictly in program order operations occurring as the
compiler would be free to do if these weren't actually register
reads/write operations.
Its possible to suppress the timeout with a liberal bit of dma_mb()'s
sprinkled around but the device still seems unable to reliably
send/receive data. A better plan is to use the safer readl/writel
everywhere.
Since this partially reverts an older commit, which notes the use of
the relaxed variants for performance reasons. I would suggest that
any performance problems with this commit are targeted at relaxing only
the performance critical code paths after assuring proper barriers.
Fixes:
69d2ea9c79898 ("net: bcmgenet: Use correct I/O accessors")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045358.224350-1-jeremy.linton@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Helgaas [Mon, 21 Mar 2022 18:34:46 +0000 (13:34 -0500)]
PCI: Avoid broken MSI on SB600 USB devices
[ Upstream commit
63cd736f449445edcd7f0bcc7d84453e9beec0aa ]
Some ATI SB600 USB adapters advertise MSI, but if INTx is disabled by
setting PCI_COMMAND_INTX_DISABLE, MSI doesn't work either. The PCI/PCIe
specs do not require software to set PCI_COMMAND_INTX_DISABLE when enabling
MSI, but Linux has done that for many years.
Mick reported that
306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI
devices") broke these devices. Prior to
306c54d0edb6, they used INTx.
Starting with
306c54d0edb6, they use MSI, and and the fact that Linux sets
PCI_COMMAND_INTX_DISABLE means both INTx and MSI are disabled on these
devices.
Avoid this SB600 defect by disabling MSI so we use INTx as before.
Fixes:
306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices")
Link: https://lore.kernel.org/r/20220321183446.1108325-1-helgaas@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215690
Link: https://lore.kernel.org/all/PxIByDyBRcsbpcmVhGSNDFAoUcMmb78ctXCkw6fbpx25TGlCHvA6SJjjFkNr1FfQZMntYPTNyvEnblxzAZ8a6jP9ddLpKeCN6Chi_2FuexU=@protonmail.com/
Link: https://lore.kernel.org/r/20220314101448.90074-1-andriy.shevchenko@linux.intel.com
BugLink: https://lore.kernel.org/all/20200702143045.23429-1-andriy.shevchenko@linux.intel.com/
Reported-by: Mick Lorain <micklorain@protonmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Mon, 21 Mar 2022 02:41:49 +0000 (10:41 +0800)]
selftests/bpf/test_lirc_mode2.sh: Exit with proper code
[ Upstream commit
ec80906b0fbd7be11e3e960813b977b1ffe5f8fe ]
When test_lirc_mode2_user exec failed, the test report failed but still
exit with 0. Fix it by exiting with an error code.
Another issue is for the LIRCDEV checking. With bash -n, we need to quote
the variable, or it will always be true. So if test_lirc_mode2_user was
not run, just exit with skip code.
Fixes:
6bdd533cee9a ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321024149.157861-1-liuhangbin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Fri, 18 Mar 2022 03:42:19 +0000 (14:42 +1100)]
powerpc/pseries: Fix use after free in remove_phb_dynamic()
[ Upstream commit
fe2640bd7a62f1f7c3f55fbda31084085075bc30 ]
In remove_phb_dynamic() we use &phb->io_resource, after we've called
device_unregister(&host_bridge->dev). But the unregister may have freed
phb, because pcibios_free_controller_deferred() is the release function
for the host_bridge.
If there are no outstanding references when we call device_unregister()
then phb will be freed out from under us.
This has gone mainly unnoticed, but with slub_debug and page_poison
enabled it can lead to a crash:
PID: 7574 TASK:
c0000000d492cb80 CPU: 13 COMMAND: "drmgr"
#0 [
c0000000e4f075a0] crash_kexec at
c00000000027d7dc
#1 [
c0000000e4f075d0] oops_end at
c000000000029608
#2 [
c0000000e4f07650] __bad_page_fault at
c0000000000904b4
#3 [
c0000000e4f076c0] do_bad_slb_fault at
c00000000009a5a8
#4 [
c0000000e4f076f0] data_access_slb_common_virt at
c000000000008b30
Data SLB Access [380] exception frame:
R0:
c000000000167250 R1:
c0000000e4f07a00 R2:
c000000002a46100
R3:
c000000002b39ce8 R4:
00000000000000c0 R5:
00000000000000a9
R6:
3894674d000000c0 R7:
0000000000000000 R8:
00000000000000ff
R9:
0000000000000100 R10:
6b6b6b6b6b6b6b6b R11:
0000000000008000
R12:
c00000000023da80 R13:
c0000009ffd38b00 R14:
0000000000000000
R15:
000000011c87f0f0 R16:
0000000000000006 R17:
0000000000000003
R18:
0000000000000002 R19:
0000000000000004 R20:
0000000000000005
R21:
000000011c87ede8 R22:
000000011c87c5a8 R23:
000000011c87d3a0
R24:
0000000000000000 R25:
0000000000000001 R26:
c0000000e4f07cc8
R27:
c00000004d1cc400 R28:
c0080000031d00e8 R29:
c00000004d23d800
R30:
c00000004d1d2400 R31:
c00000004d1d2540
NIP:
c000000000167258 MSR:
8000000000009033 OR3:
c000000000e9f474
CTR:
0000000000000000 LR:
c000000000167250 XER:
0000000020040003
CCR:
0000000024088420 MQ:
0000000000000000 DAR:
6b6b6b6b6b6b6ba3
DSISR:
c0000000e4f07920 Syscall Result:
fffffffffffffff2
[NIP : release_resource+56]
[LR : release_resource+48]
#5 [
c0000000e4f07a00] release_resource at
c000000000167258 (unreliable)
#6 [
c0000000e4f07a30] remove_phb_dynamic at
c000000000105648
#7 [
c0000000e4f07ab0] dlpar_remove_slot at
c0080000031a09e8 [rpadlpar_io]
#8 [
c0000000e4f07b50] remove_slot_store at
c0080000031a0b9c [rpadlpar_io]
#9 [
c0000000e4f07be0] kobj_attr_store at
c000000000817d8c
#10 [
c0000000e4f07c00] sysfs_kf_write at
c00000000063e504
#11 [
c0000000e4f07c20] kernfs_fop_write_iter at
c00000000063d868
#12 [
c0000000e4f07c70] new_sync_write at
c00000000054339c
#13 [
c0000000e4f07d10] vfs_write at
c000000000546624
#14 [
c0000000e4f07d60] ksys_write at
c0000000005469f4
#15 [
c0000000e4f07db0] system_call_exception at
c000000000030840
#16 [
c0000000e4f07e10] system_call_vectored_common at
c00000000000c168
To avoid it, we can take a reference to the host_bridge->dev until we're
done using phb. Then when we drop the reference the phb will be freed.
Fixes:
2dd9c11b9d4d ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)")
Reported-by: David Dai <zdai@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Link: https://lore.kernel.org/r/20220318034219.1188008-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Rosin [Wed, 2 Mar 2022 11:22:35 +0000 (12:22 +0100)]
i2c: mux: demux-pinctrl: do not deactivate a master that is not active
[ Upstream commit
1a22aabf20adf89cb216f566913196128766f25b ]
Attempting to rollback the activation of the current master when
the current master has not been activated is bad. priv->cur_chan
and priv->cur_adap are both still zeroed out and the rollback
may result in attempts to revert an of changeset that has not been
applied and do result in calls to both del and put the zeroed out
i2c_adapter. Maybe it crashes, or whatever, but it's bad in any
case.
Fixes:
e9d1a0a41d44 ("i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Phil Sutter [Wed, 2 Mar 2022 21:02:55 +0000 (22:02 +0100)]
netfilter: conntrack: Add and use nf_ct_set_auto_assign_helper_warned()
[ Upstream commit
31d0bb9763efad30377505f3467f958d1ebe1e3d ]
The function sets the pernet boolean to avoid the spurious warning from
nf_ct_lookup_helper() when assigning conntrack helpers via nftables.
Fixes:
1a64edf54f55 ("netfilter: nft_ct: add helper set support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Tanure [Tue, 1 Mar 2022 07:26:00 +0000 (07:26 +0000)]
i2c: meson: Fix wrong speed use from probe
[ Upstream commit
cb13aa16f34f794a9cee2626862af8a95f0f0ee9 ]
Having meson_i2c_set_clk_div after i2c_add_adapter
causes issues for client drivers that try to use
the bus before the requested speed is applied.
The bus can be used just after i2c_add_adapter, so
move i2c_add_adapter to the final step as
meson_i2c_set_clk_div needs to be called before
the bus is used.
Fixes:
09af1c2fa490 ("i2c: meson: set clock divider in probe instead of setting it for each transfer")
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Petr Machata [Thu, 17 Mar 2022 14:53:06 +0000 (15:53 +0100)]
af_netlink: Fix shift out of bounds in group mask calculation
[ Upstream commit
0caf6d9922192dd1afa8dc2131abfb4df1443b9f ]
When a netlink message is received, netlink_recvmsg() fills in the address
of the sender. One of the fields is the 32-bit bitfield nl_groups, which
carries the multicast group on which the message was received. The least
significant bit corresponds to group 1, and therefore the highest group
that the field can represent is 32. Above that, the UB sanitizer flags the
out-of-bounds shift attempts.
Which bits end up being set in such case is implementation defined, but
it's either going to be a wrong non-zero value, or zero, which is at least
not misleading. Make the latter choice deterministic by always setting to 0
for higher-numbered multicast groups.
To get information about membership in groups >= 32, userspace is expected
to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO
socket option.
[0] https://lwn.net/Articles/147608/
The way to trigger this issue is e.g. through monitoring the BRVLAN group:
# bridge monitor vlan &
# ip link add name br type bridge
Which produces the following citation:
UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19
shift exponent 32 is too large for 32-bit type 'int'
Fixes:
f7fa9b10edbb ("[NETLINK]: Support dynamic number of multicast groups per netlink family")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/2bef6aabf201d1fc16cca139a744700cff9dcb04.1647527635.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guillaume Nault [Thu, 17 Mar 2022 12:45:09 +0000 (13:45 +0100)]
ipv4: Fix route lookups when handling ICMP redirects and PMTU updates
[ Upstream commit
544b4dd568e3b09c1ab38a759d3187e7abda11a0 ]
The PMTU update and ICMP redirect helper functions initialise their fl4
variable with either __build_flow_key() or build_sk_flow_key(). These
initialisation functions always set ->flowi4_scope with
RT_SCOPE_UNIVERSE and might set the ECN bits of ->flowi4_tos. This is
not a problem when the route lookup is later done via
ip_route_output_key_hash(), which properly clears the ECN bits from
->flowi4_tos and initialises ->flowi4_scope based on the RTO_ONLINK
flag. However, some helpers call fib_lookup() directly, without
sanitising the tos and scope fields, so the route lookup can fail and,
as a result, the ICMP redirect or PMTU update aren't taken into
account.
Fix this by extracting the ->flowi4_tos and ->flowi4_scope sanitisation
code into ip_rt_fix_tos(), then use this function in handlers that call
fib_lookup() directly.
Note 1: We can't sanitise ->flowi4_tos and ->flowi4_scope in a central
place (like __build_flow_key() or flowi4_init_output()), because
ip_route_output_key_hash() expects non-sanitised values. When called
with sanitised values, it can erroneously overwrite RT_SCOPE_LINK with
RT_SCOPE_UNIVERSE in ->flowi4_scope. Therefore we have to be careful to
sanitise the values only for those paths that don't call
ip_route_output_key_hash().
Note 2: The problem is mostly about sanitising ->flowi4_tos. Having
->flowi4_scope initialised with RT_SCOPE_UNIVERSE instead of
RT_SCOPE_LINK probably wasn't really a problem: sockets with the
SOCK_LOCALROUTE flag set (those that'd result in RTO_ONLINK being set)
normally shouldn't receive ICMP redirects or PMTU updates.
Fixes:
4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yake Yang [Wed, 16 Mar 2022 23:15:19 +0000 (07:15 +0800)]
Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt
[ Upstream commit
b062a0b9c1dc1ff63094337dccfe1568d5b62023 ]
Fix the following kernel oops in btmtksdio_interrrupt
[ 14.339134] btmtksdio_interrupt+0x28/0x54
[ 14.339139] process_sdio_pending_irqs+0x68/0x1a0
[ 14.339144] sdio_irq_work+0x40/0x70
[ 14.339154] process_one_work+0x184/0x39c
[ 14.339160] worker_thread+0x228/0x3e8
[ 14.339168] kthread+0x148/0x3ac
[ 14.339176] ret_from_fork+0x10/0x30
That happened because hdev->power_on is already called before
sdio_set_drvdata which btmtksdio_interrupt handler relies on is not
properly set up.
The details are shown as the below: hci_register_dev would run
queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI
workqueue_struct to complete the power-on sequeunce and thus hci_power_on
may run before sdio_set_drvdata is done in btmtksdio_probe.
The hci_dev_do_open in hci_power_on would initialize the device and enable
the interrupt and thus it is possible that btmtksdio_interrupt is being
called right before sdio_set_drvdata is filled out.
When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled
, the kernel oops is going to happen because btmtksdio_interrupt access an
uninitialized pointer.
Fixes:
9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices")
Reviewed-by: Mark Chen <markyawenchen@gmail.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niels Dossche [Wed, 16 Mar 2022 15:33:50 +0000 (16:33 +0100)]
Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failed
[ Upstream commit
9fa6b4cda3b414e990f008f45f9bcecbcb54d4d1 ]
hci_le_conn_failed function's documentation says that the caller must
hold hdev->lock. The only callsite that does not hold that lock is
hci_le_conn_failed. The other 3 callsites hold the hdev->lock very
locally. The solution is to hold the lock during the call to
hci_le_conn_failed.
Fixes:
3c857757ef6e ("Bluetooth: Add directed advertising support through connect()")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Sun, 13 Mar 2022 17:49:36 +0000 (20:49 +0300)]
Bluetooth: hci_uart: add missing NULL check in h5_enqueue
[ Upstream commit
32cb08e958696908a9aad5e49a78d74f7e32fffb ]
Syzbot hit general protection fault in __pm_runtime_resume(). The problem
was in missing NULL check.
hu->serdev can be NULL and we should not blindly pass &serdev->dev
somewhere, since it will cause GPF.
Reported-by: syzbot+b9bd12fbed3485a3e51f@syzkaller.appspotmail.com
Fixes:
d9dd833cf6d2 ("Bluetooth: hci_h5: Add runtime suspend")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Sitnicki [Thu, 17 Mar 2022 11:39:17 +0000 (12:39 +0100)]
selftests/bpf: Fix error reporting from sock_fields programs
[ Upstream commit
a4c9fe0ed4a13e25e43fcd44d9f89bc19ba8fbb7 ]
The helper macro that records an error in BPF programs that exercise sock
fields access has been inadvertently broken by adaptation work that
happened in commit
b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to
use skel and global variables").
BPF_NOEXIST flag cannot be used to update BPF_MAP_TYPE_ARRAY. The operation
always fails with -EEXIST, which in turn means the error never gets
recorded, and the checks for errors always pass.
Revert the change in update flags.
Fixes:
b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to use skel and global variables")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-2-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Thu, 17 Mar 2022 03:08:08 +0000 (12:08 +0900)]
af_unix: Fix some data-races around unix_sk(sk)->oob_skb.
[ Upstream commit
e82025c623e2bf04d162bafceb66a59115814479 ]
Out-of-band data automatically places a "mark" showing wherein the
sequence the out-of-band data would have been. If the out-of-band data
implies cancelling everything sent so far, the "mark" is helpful to flush
them. When the socket's read pointer reaches the "mark", the ioctl() below
sets a non zero value to the arg `atmark`:
The out-of-band data is queued in sk->sk_receive_queue as well as ordinary
data and also saved in unix_sk(sk)->oob_skb. It can be used to test if the
head of the receive queue is the out-of-band data meaning the socket is at
the "mark".
While testing that, unix_ioctl() reads unix_sk(sk)->oob_skb locklessly.
Thus, all accesses to oob_skb need some basic protection to avoid
load/store tearing which KCSAN detects when these are called concurrently:
- ioctl(fd_a, SIOCATMARK, &atmark, sizeof(atmark))
- send(fd_b_connected_to_a, buf, sizeof(buf), MSG_OOB)
BUG: KCSAN: data-race in unix_ioctl / unix_stream_sendmsg
write to 0xffff888003d9cff0 of 8 bytes by task 175 on cpu 1:
unix_stream_sendmsg (net/unix/af_unix.c:2087 net/unix/af_unix.c:2191)
sock_sendmsg (net/socket.c:705 net/socket.c:725)
__sys_sendto (net/socket.c:2040)
__x64_sys_sendto (net/socket.c:2048)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
read to 0xffff888003d9cff0 of 8 bytes by task 176 on cpu 0:
unix_ioctl (net/unix/af_unix.c:3101 (discriminator 1))
sock_do_ioctl (net/socket.c:1128)
sock_ioctl (net/socket.c:1242)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:874 fs/ioctl.c:860 fs/ioctl.c:860)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
value changed: 0xffff888003da0c00 -> 0xffff888003da0d00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 176 Comm: unix_race_oob_i Not tainted 5.17.0-rc5-59529-g83dc4c2af682 #12
Hardware name: Red Hat KVM, BIOS 1.11.0-2.amzn2 04/01/2014
Fixes:
314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sukadev Bhattiprolu [Thu, 17 Mar 2022 01:12:31 +0000 (18:12 -0700)]
ibmvnic: fix race between xmit and reset
[ Upstream commit
4219196d1f662cb10a462eb9e076633a3fc31a15 ]
There is a race between reset and the transmit paths that can lead to
ibmvnic_xmit() accessing an scrq after it has been freed in the reset
path. It can result in a crash like:
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000016189f8
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [
c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic]
LR [
c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
Call Trace:
[
c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable)
[
c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[
c000000000c9cfcc] sch_direct_xmit+0xec/0x330
[
c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0
[
c000000000c00ad4] __dev_queue_xmit+0x394/0x730
[
c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding]
[
c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding]
[
c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[
c000000000c00ca4] __dev_queue_xmit+0x564/0x730
[
c000000000cf97e0] neigh_hh_output+0xd0/0x180
[
c000000000cfa69c] ip_finish_output2+0x31c/0x5c0
[
c000000000cfd244] __ip_queue_xmit+0x194/0x4f0
[
c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0
[
c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0
[
c000000000d2d984] tcp_retransmit_skb+0x34/0x130
[
c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0
[
c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330
[
c000000000d317bc] tcp_write_timer+0x5c/0x200
[
c000000000243270] call_timer_fn+0x50/0x1c0
[
c000000000243704] __run_timers.part.0+0x324/0x460
[
c000000000243894] run_timer_softirq+0x54/0xa0
[
c000000000ea713c] __do_softirq+0x15c/0x3e0
[
c000000000166258] __irq_exit_rcu+0x158/0x190
[
c000000000166420] irq_exit+0x20/0x40
[
c00000000002853c] timer_interrupt+0x14c/0x2b0
[
c000000000009a00] decrementer_common_virt+0x210/0x220
--- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c
The immediate cause of the crash is the access of tx_scrq in the following
snippet during a reset, where the tx_scrq can be either NULL or an address
that will soon be invalid:
ibmvnic_xmit()
{
...
tx_scrq = adapter->tx_scrq[queue_num];
txq = netdev_get_tx_queue(netdev, queue_num);
ind_bufp = &tx_scrq->ind_buf;
if (test_bit(0, &adapter->resetting)) {
...
}
But beyond that, the call to ibmvnic_xmit() itself is not safe during a
reset and the reset path attempts to avoid this by stopping the queue in
ibmvnic_cleanup(). However just after the queue was stopped, an in-flight
ibmvnic_complete_tx() could have restarted the queue even as the reset is
progressing.
Since the queue was restarted we could get a call to ibmvnic_xmit() which
can then access the bad tx_scrq (or other fields).
We cannot however simply have ibmvnic_complete_tx() check the ->resetting
bit and skip starting the queue. This can race at the "back-end" of a good
reset which just restarted the queue but has not cleared the ->resetting
bit yet. If we skip restarting the queue due to ->resetting being true,
the queue would remain stopped indefinitely potentially leading to transmit
timeouts.
IOW ->resetting is too broad for this purpose. Instead use a new flag
that indicates whether or not the queues are active. Only the open/
reset paths control when the queues are active. ibmvnic_complete_tx()
and others wake up the queue only if the queue is marked active.
So we will have:
A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open()
->resetting = true
->tx_queues_active = false
disable tx queues
...
->tx_queues_active = true
start tx queues
B. Tx interrupt in ibmvnic_complete_tx():
if (->tx_queues_active)
netif_wake_subqueue();
To ensure that ->tx_queues_active and state of the queues are consistent,
we need a lock which:
- must also be taken in the interrupt path (ibmvnic_complete_tx())
- shared across the multiple queues in the adapter (so they don't
become serialized)
Use rcu_read_lock() and have the reset thread synchronize_rcu() after
updating the ->tx_queues_active state.
While here, consolidate a few boolean fields in ibmvnic_adapter for
better alignment.
Based on discussions with Brian King and Dany Madden.
Fixes:
7ed5b31f4a66 ("net/ibmvnic: prevent more than one thread from running in reset")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Tue, 15 Mar 2022 06:26:18 +0000 (14:26 +0800)]
bareudp: use ipv6_mod_enabled to check if IPv6 enabled
[ Upstream commit
e077ed58c243afc197bc2a2ba0e1ff61135e4ec2 ]
bareudp_create_sock() use AF_INET6 by default if IPv6 CONFIG enabled.
But if user start kernel with ipv6.disable=1, the bareudp sock will
created failed, which cause the interface open failed even with ethertype
ip. e.g.
# ip link add bareudp1 type bareudp dstport 2 ethertype ip
# ip link set bareudp1 up
RTNETLINK answers: Address family not supported by protocol
Fix it by using ipv6_mod_enabled() to check if IPv6 enabled. There is
no need to check IS_ENABLED(CONFIG_IPV6) as ipv6_mod_enabled() will
return false when CONFIG_IPV6 no enabled in include/linux/ipv6.h.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes:
571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220315062618.156230-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oliver Hartkopp [Wed, 16 Mar 2022 16:42:58 +0000 (17:42 +0100)]
can: isotp: support MSG_TRUNC flag when reading from socket
[ Upstream commit
42bf50a1795a1854d48717b7361dbdbce496b16b ]
When providing the MSG_TRUNC flag via recvmsg() syscall the return value
provides the real length of the packet or datagram, even when it was longer
than the passed buffer.
Fixes:
e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1065932671
Link: https://lore.kernel.org/all/20220316164258.54155-3-socketcan@hartkopp.net
Suggested-by: Derek Will <derekrobertwill@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>