Ladislav Michl [Wed, 25 Apr 2007 14:01:26 +0000 (16:01 +0200)]
[PATCH] simplify silent console
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Stefan Roese <sr@denx.de>
Sergei Shtylyov [Mon, 23 Apr 2007 13:30:39 +0000 (15:30 +0200)]
[PATCH] Avoid assigning PCI resources from zero address
If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
core complains and IDE drivers fails to work. Also, assigning zero to a BAR
was illegal according to PCI 2.1 (the later revisions seem to have excluded the
sentence about "0" being considered an invalid address) -- so, use a reasonable
starting value of 0x1000 (that's what the most Linux archs are using).
Alternatively, one might have fixed the calls to pci_set_region() individually
(some code even seems to have taken care of this issue) but that would have
been a lot more work. :-)
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Stefan Roese <sr@denx.de>
Jeffrey Mann [Mon, 23 Apr 2007 12:00:11 +0000 (14:00 +0200)]
[patch] setenv(...) can delete environmentalvariables
update setenv() function so that entering a NULL value for the
variable's value will delete the environmental variable
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Acked-by: Stefan Roese <sr@denx.de>
Mike Frysinger [Mon, 23 Apr 2007 11:54:24 +0000 (13:54 +0200)]
[patch] use unsigned char in smc91111 driver for mac
the v_mac variable in the smc91111 driver is declared as a signed char ...
this causes problems when one of the bytes in the MAC is "signed" like 0xE0
because when it gets printed out, you get a display like:
0xFFFFFFE0 and that's no good
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Sat, 5 May 2007 16:23:11 +0000 (18:23 +0200)]
Coding stylke cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 5 May 2007 16:07:10 +0000 (18:07 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Wolfgang Denk [Sat, 5 May 2007 16:05:02 +0000 (18:05 +0200)]
Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 5 May 2007 15:33:22 +0000 (17:33 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc85xx
Wolfgang Denk [Sat, 5 May 2007 15:15:50 +0000 (17:15 +0200)]
Make "file" command happy with some config.mk files; update CHANGELOG
Wolfgang Denk [Sat, 5 May 2007 14:57:46 +0000 (16:57 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-nand-flash
Wolfgang Denk [Sat, 5 May 2007 14:48:48 +0000 (16:48 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc86xx
Stefan Roese [Sat, 5 May 2007 06:37:54 +0000 (08:37 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Jeffrey Mann [Sat, 5 May 2007 06:32:14 +0000 (08:32 +0200)]
ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
The AMCC Secquoia board has been changed in a new revision from using a
33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
indicates the difference. This patch reads that bit and uses the correct
clock speed for the board. This code is backward compatable will all
prior boards. All prior boards will be read as 33.000.
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 5 May 2007 06:29:01 +0000 (08:29 +0200)]
ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
for the 4k NAND boot image so define bus_frequency to 133MHz here
which is save for the refresh counter setup.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 5 May 2007 05:10:03 +0000 (07:10 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Thomas Knobloch [Sat, 5 May 2007 05:04:42 +0000 (07:04 +0200)]
NAND: Wrong calculation of page number in nand_block_bad()
In case that there is no memory based bad block table available the
function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
nand_block_bad() directly. When parameter 'getchip' is set to zero,
nand_block_bad() will not right shift the offset to calculate the
correct page number.
Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Fri, 4 May 2007 08:02:33 +0000 (10:02 +0200)]
Fix initrd length corruption in bootm command.
When using FDT Images, the length of an inital ramdisk was
overwritten (bug introduced by commit
87a449c8, 22 Aug 2006).
Patches by Timur Tabi & Johns Daniel.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 3 May 2007 14:34:41 +0000 (16:34 +0200)]
Update board configuration for STX GP3SSA board:
Enable hush shell, environment in flash rather in EEPROM,
more user-friendly default environment, etc.
The simple EEPROM environment can be selected easily in the board
config file.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 24 Apr 2007 12:37:49 +0000 (14:37 +0200)]
Cleanup STX GP3SSA code; fix build and compile problems.
Dan Malek [Fri, 5 Jan 2007 08:15:34 +0000 (09:15 +0100)]
Add support for STX GP3SSA (stxssa) Board
Signed-off-by Dan Malek, <dan@embeddedalley.com>
Andy Fleming [Sat, 24 Feb 2007 07:08:13 +0000 (01:08 -0600)]
Cleaned up some 85xx PCI bugs
* Cleaned up the CDS PCI Config Tables and added NULL entries to
the end
* Fixed PCIe LAWBAR assignemt to use the cpu-relative address
* Fixed 85xx PCI code to assign powar region sizes based on the
config values (rather than hard-coding them)
* Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
Signed-off-by: Andy Fleming <afleming@freescale.com>
Andy Fleming [Mon, 23 Apr 2007 07:54:25 +0000 (02:54 -0500)]
Add support for the 8568 MDS board
This included some changes to common files:
* Add 8568 processor SVR to various places
* Add support for setting the qe bus-frequency value in the dts
* Add the 8568MDS target to the Makefile
Signed-off-by: Andy Fleming <afleming@freescale.com>
David Updegraff [Fri, 20 Apr 2007 19:34:48 +0000 (14:34 -0500)]
Add support for treating unknown PHYs as generic PHYs.
When bringing up u-boot on new boards, PHY support sometimes gets
neglected. Most PHYs don't really need any special support,
though. By adding a generic entry that always matches if nothing
else does, we can provide support for "unsupported" PHYs for the
tsec.
The generic PHY driver supports most PHYs, including gigabit.
Signed-off-by: David Updegraff <dave@cray.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
James Yang [Wed, 7 Feb 2007 21:28:04 +0000 (15:28 -0600)]
Conditionalize 8641 Rev1.0 MCM workarounds
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
James Yang [Fri, 16 Mar 2007 18:02:53 +0000 (13:02 -0500)]
Rewrote picos_to_clk() to avoid rounding errors.
Clarified that conversion is to DRAM clocks rather than platform clocks.
Made function static to spd_sdram.c.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roese [Sun, 29 Apr 2007 14:40:31 +0000 (16:40 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Stefan Roese [Sun, 29 Apr 2007 14:34:10 +0000 (16:34 +0200)]
Merge with /home/stefan/git/u-boot/u-boot-ppc4xx
Stefan Roese [Sun, 29 Apr 2007 12:13:01 +0000 (14:13 +0200)]
ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Tue, 24 Apr 2007 12:03:45 +0000 (14:03 +0200)]
ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Andy Fleming [Mon, 23 Apr 2007 07:37:47 +0000 (02:37 -0500)]
Reworked 85xx speed detection code
Changed the code to read the registers and calculate the clock
rates, rather than using a "switch" statement.
Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Andy Fleming [Mon, 23 Apr 2007 07:24:28 +0000 (02:24 -0500)]
Enable 8544 support
* Add support to the Makefile
* Add 8544 configuration support to the tsec driver
* Add 8544 SVR numbers to processor.h
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Andy Fleming [Fri, 23 Feb 2007 23:12:25 +0000 (17:12 -0600)]
Support 1G size on 8548
e500v2 and newer cores support 1G page sizes.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Andy Fleming [Fri, 23 Feb 2007 23:11:16 +0000 (17:11 -0600)]
Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
The other pagesz constants use one letter to specify order of
magnitude. Also change the one reference to it in mpc8548cds/init.S
Signed-off-by: Andy Fleming <afleming@freescale.com>
Andy Fleming [Fri, 23 Feb 2007 22:28:46 +0000 (16:28 -0600)]
Only set ddrioovcr for 8548 rev1.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Andy Fleming [Sat, 24 Feb 2007 07:16:45 +0000 (01:16 -0600)]
Tweak DDR ECC error counter
Enable single-bit error counter when memory was cleared by ddr controller.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Timur Tabi [Mon, 12 Feb 2007 19:34:55 +0000 (13:34 -0600)]
85xx: write MAC address to mac-address and local-mac-address
Some device trees have a mac-address property, some have local-mac-address,
and some have both. To support all of these device trees, ftp_cpu_setup()
should write the MAC address to mac-address and local-mac-address, if they
exist.
Signed-off-by: Timur Tabi <timur@freescale.com>
Andy Fleming [Mon, 23 Apr 2007 06:44:44 +0000 (01:44 -0500)]
Some 85xx cpu cleanups
* Cleaned up the TSR[WIS] clearing
* Cleaned up DMA initialization
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Andy Fleming [Mon, 23 Apr 2007 06:32:22 +0000 (01:32 -0500)]
Add cpu support for the 8544
Recognize new SVR values, and add a few register definitions
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Jon Loeliger [Wed, 11 Apr 2007 21:51:02 +0000 (16:51 -0500)]
Add MPC8544DS basic port board files.
Add board port under new board/freescale directory
structure and reuse existing PIXIS FPGA support there.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Wed, 11 Apr 2007 21:50:57 +0000 (16:50 -0500)]
Add MPC8544DS main configuration file.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Sergei Shtylyov [Wed, 27 Dec 2006 19:07:15 +0000 (22:07 +0300)]
Fix PCI I/O space mapping on Freescale MPC85x0ADS
The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
describing the local address window used for the PCI I/O space accesses -- fix
this and carry over the necessary changes into the MPC8560ADS code since the
PCI I/O space mapping was also broken for this board (by the earlier commit
087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
the PCI I/O space must be mapped to all the MPC85xx board config. headers.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
board/mpc8540ads/init.S | 4 ++--
board/mpc8560ads/init.S | 4 ++--
include/configs/MPC8540ADS.h | 5 ++---
include/configs/MPC8541CDS.h | 2 +-
include/configs/MPC8548CDS.h | 2 +-
include/configs/MPC8560ADS.h | 8 ++++----
6 files changed, 12 insertions(+), 13 deletions(-)
Zang Roy-r61911 [Tue, 5 Dec 2006 08:42:30 +0000 (16:42 +0800)]
u-boot: Fix e500 v2 core reset bug
The following patch fixes the e500 v2 core reset bug.
For e500 v2 core, a new reset control register is added to reset the
processor.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Zang Roy-r61911 [Wed, 20 Dec 2006 03:01:00 +0000 (11:01 +0800)]
u-boot: v2: Remove the fixed TLB and LAW entrynubmer
Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
entry number to control the loop. This can reduce the potential risk
for the 85xx processor increasing its TLB adn LAW entry number.
Signed-off-by: Swarthout Edward <swarthout@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Zang Roy-r61911 [Mon, 18 Dec 2006 09:01:04 +0000 (17:01 +0800)]
u-boot: Fix the 85xxcds tsec bug
Fix the 85xxcds tsec bug.
When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Zang Roy-r61911 [Fri, 15 Dec 2006 06:43:31 +0000 (14:43 +0800)]
u-boot: Fix CPU2 errata on MPC8548CDS board
This patch apply workaround of CPU2 errata on MPC8548CDS board.
Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
ebony.zhu@freescale.com [Mon, 18 Dec 2006 08:25:15 +0000 (16:25 +0800)]
u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
This patch disables MPC8548CDS 2T_TIMING for DDR by default.
Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
Zang Roy-r61911 [Thu, 14 Dec 2006 06:14:55 +0000 (14:14 +0800)]
u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
board.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Stefan Roese [Mon, 23 Apr 2007 10:01:50 +0000 (12:01 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Stefan Roese [Mon, 23 Apr 2007 10:00:22 +0000 (12:00 +0200)]
Remove BOARDLIBS usage completely
Signed-off-by: Stefan Roese <sr@denx.de>
Ed Swarthout [Wed, 28 Feb 2007 11:37:29 +0000 (05:37 -0600)]
mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Zhang Wei [Fri, 19 Jan 2007 02:42:37 +0000 (10:42 +0800)]
Enable LAWs for MPC8641 PCI-Ex2.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Fri, 20 Apr 2007 19:12:26 +0000 (14:12 -0500)]
mpc86xx; Write MAC address to mac-address and local-mac-address
Some device trees have a mac-address property, some have local-mac-address,
and some have both. To support all of these device trees, ftp_cpu_setup()
should write the MAC address to mac-address and local-mac-address, if they
exist.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Fri, 20 Apr 2007 19:11:38 +0000 (14:11 -0500)]
mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk [Fri, 20 Apr 2007 15:43:28 +0000 (17:43 +0200)]
Cleanup compiler warnings, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Fri, 20 Apr 2007 13:50:04 +0000 (15:50 +0200)]
Merge with /home/dzu/src/git/u-boot
Wolfgang Denk [Fri, 20 Apr 2007 13:44:38 +0000 (15:44 +0200)]
Merge with git://www.denx.de/git/u-boot-testing
Wolfgang Denk [Fri, 20 Apr 2007 13:41:05 +0000 (15:41 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-arm
Detlev Zundel [Fri, 20 Apr 2007 10:01:47 +0000 (12:01 +0200)]
Fix breakage of NC650 board with respect to nand support.
Signed-off-by: Detlev Zundel <dzu@denx.de>
Domen Puncer [Fri, 20 Apr 2007 09:13:16 +0000 (11:13 +0200)]
[RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
G2 core reference manual says decrementer and time base
are decreasing/increasing once every 4 bus clock cycles.
Lets fix it, so time in Linux won't run twice as fast
Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Gerald Van Baren [Fri, 20 Apr 2007 03:14:39 +0000 (23:14 -0400)]
Fix serious pointer bug with bootm and reserve map.
What was suppose to be a stack variable was declared as a pointer,
overwriting random memory.
Also moved the libfdt.a requirement into the main Makefile. That is
The U-Boot Way.
Peter Pearse [Thu, 19 Apr 2007 12:17:20 +0000 (13:17 +0100)]
Merge with git://www.denx.de/git/u-boot.git
Stefan Roese [Thu, 19 Apr 2007 07:53:52 +0000 (09:53 +0200)]
ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
Previous versions used full wait states for the chip select #1 which
is connected to the Xilinix SystemACE controller on the AMCC Katmai
evaluation board. This leads to really slow access and therefore low
performance. This patch now sets up the chip select a lot faster
resulting in much better read/write performance of the Linux driver.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Wed, 18 Apr 2007 15:49:29 +0000 (17:49 +0200)]
Clenaup, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 18 Apr 2007 15:47:39 +0000 (17:47 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-fdt
Wolfgang Denk [Wed, 18 Apr 2007 15:20:58 +0000 (17:20 +0200)]
Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 18 Apr 2007 15:20:22 +0000 (17:20 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc86xx
Wolfgang Denk [Wed, 18 Apr 2007 15:10:30 +0000 (17:10 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-net
Wolfgang Denk [Wed, 18 Apr 2007 15:07:26 +0000 (17:07 +0200)]
Cleanup, update CHANGELOG
Sigend-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 18 Apr 2007 15:00:09 +0000 (17:00 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-74xx-7xx
Wolfgang Denk [Wed, 18 Apr 2007 14:53:52 +0000 (16:53 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-avr32; code cleanup.
Wolfgang Denk [Wed, 18 Apr 2007 14:17:46 +0000 (16:17 +0200)]
Update CHANGELOG
Wolfgang Denk [Wed, 18 Apr 2007 14:16:33 +0000 (16:16 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-blackfin
Wolfgang Denk [Wed, 18 Apr 2007 14:06:05 +0000 (16:06 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Wolfgang Denk [Wed, 18 Apr 2007 12:30:39 +0000 (14:30 +0200)]
MCC200 board: remove warning which is obsolete after PSoC firmware changes
Signed-off-by: Wolfgang Denk <wd@denx.de>
Stefan Roese [Wed, 18 Apr 2007 10:13:51 +0000 (12:13 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Domen Puncer [Wed, 18 Apr 2007 10:11:05 +0000 (12:11 +0200)]
[PATCH] icecube/lite5200b: document wakeup from low-power support
Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Stefan Roese [Wed, 18 Apr 2007 10:07:47 +0000 (12:07 +0200)]
ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 18 Apr 2007 10:05:59 +0000 (12:05 +0200)]
ppc4xx: Add output for bootrom location to 405EZ ports
Now 405EZ ports also show upon bootup from which boot device
they are configured to boot:
U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
Bootstrap Option E - Boot ROM Location EBC (32 bits)
16 kB I-Cache 16 kB D-Cache
Board: Acadia - AMCC PPC405EZ Evaluation Board
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Pearse [Tue, 17 Apr 2007 12:30:33 +0000 (13:30 +0100)]
Move ppearse to ARM board list
Add Konstantin Kletschke for scb9328.
Signed-off-by: Peter Pearse <peter.pearse@arm.com>
Domen Puncer [Mon, 16 Apr 2007 12:00:13 +0000 (14:00 +0200)]
[PATCH] icecube/lite5200b: wakeup from low-power support
U-Boot part of Lite5200b low power mode support.
Puts SDRAM out of self-refresh and transfers control to
address saved at physical 0x0.
Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Gerald Van Baren [Sun, 15 Apr 2007 17:54:26 +0000 (13:54 -0400)]
Fix the ft_cpu_setup() property settings.
Use "setter" functions instead of flags, cleaner and more flexible.
It also fixes the problem noted by Timur Tabi that the ethernet MAC
addresses were all being set incorrectly to the same MAC address.
Gerald Van Baren [Sun, 15 Apr 2007 03:02:21 +0000 (23:02 -0400)]
Merge git://www.denx.de/git/u-boot into fdt-cmd
Gerald Van Baren [Sun, 15 Apr 2007 02:51:24 +0000 (22:51 -0400)]
Improve the bootm command for CONFIG_OF_LIBFDT
In bootm, create the "/chosen" node only if it doesn't already exist
(better matches the previous behavior).
Update for proper reserved memory map handling for initrd.
Gerald Van Baren [Sun, 15 Apr 2007 02:46:41 +0000 (22:46 -0400)]
Add some utilities to manipulate the reserved memory map.
Wolfgang Denk [Sat, 14 Apr 2007 19:16:54 +0000 (21:16 +0200)]
Update CHANGELOG
Haavard Skinnemoen [Sun, 17 Dec 2006 17:56:46 +0000 (18:56 +0100)]
AVR32: Enable MMC support
Set up the portmux for the MMC interface and enable the MMC driver
along with support for DOS partitions, ext2 and FAT filesystems.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Fri, 20 Jan 2006 09:03:53 +0000 (10:03 +0100)]
Atmel MCI driver
Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
The AT91 ARM-based CPUs use basically the same hardware, so it should
be possible to share this driver, but no effort has been made so far.
Hardware documentation can be found in the AT32AP7000 data sheet,
which can be downloaded from
http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sun, 17 Dec 2006 17:55:37 +0000 (18:55 +0100)]
AVR32: Add clk and gpio infrastructure for mmci
Implement functions for configuring the mmci pins, as well as
functions for getting the clock rate of the mmci controller.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sun, 17 Dec 2006 17:53:56 +0000 (18:53 +0100)]
Enable partition support with MMC
Include implementations of init_part() and get_partition_info() when
CONFIG_MMC is set.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sun, 17 Dec 2006 16:14:30 +0000 (17:14 +0100)]
AVR32: Enable networking
Implement MACB initialization for AVR32 and ATSTK1000, and turn
everything on, including the MACB driver.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Fri, 20 Jan 2006 09:03:34 +0000 (10:03 +0100)]
Atmel MACB ethernet driver
Driver for the Atmel MACB on-chip ethernet controller.
This driver has been tested on the ATSTK1000 board with a AT32AP7000
CPU. It should probably work on AT91SAM926x as well with some minor
modifications.
Hardware documentation can be found in the AT32AP7000 data sheet,
which can be downloaded from
http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sun, 17 Dec 2006 15:56:14 +0000 (16:56 +0100)]
AVR32: Add clk and gpio infrastructure for macb0 and macb1
Implement functions for configuring the macb0 and macb1 pins, as
well as functions for getting the clock rate of the various
busses the macb ethernet controllers are connected to.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sun, 17 Dec 2006 14:39:15 +0000 (15:39 +0100)]
AVR32: Implement simple DMA memory allocator
Implement dma_alloc_coherent() which returns cache-aligned
uncacheable memory.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sun, 17 Dec 2006 14:46:02 +0000 (15:46 +0100)]
Import <linux/mii.h> from the Linux kernel
Instead of creating yet another set of MII register definitions
in the macb driver, here's a complete set of definitions for everyone
to use.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Wed, 21 Mar 2007 18:47:36 +0000 (19:47 +0100)]
AVR32: Include more commands for ATSTK1000
Include the imi, imls and jffs commands sets by default on ATSTK1000.
Also define CONFIG_BOOTARGS to something more useful, define
CONFIG_BOOTCOMMAND and enable autoboot by default.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Wed, 21 Mar 2007 18:44:48 +0000 (19:44 +0100)]
AVR32: Provide a definition of struct stat
Copy the definition of struct stat from the Linux kernel.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sun, 17 Dec 2006 13:46:06 +0000 (14:46 +0100)]
AVR32: Use initdram() instead of board_init_memories()
Conform to the "standard" interface and use initdram() instead of
board_init_memories() on AVR32. This enables us to get rid of the
sdram_size member of the global_data struct as well.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Mon, 20 Nov 2006 14:53:10 +0000 (15:53 +0100)]
AVR32: Relocate u-boot to SDRAM
Relocate the u-boot image into SDRAM like everyone else does. This
means that we can handle much larger .data and .bss than we used to.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sun, 19 Nov 2006 17:06:53 +0000 (18:06 +0100)]
AVR32: Resource management rewrite
Rewrite the resource management code (i.e. I/O memory, clock gating,
gpio) so it doesn't depend on any global state. This is necessary
because this code is heavily used before relocation to RAM, so we
can't write to any global variables.
As an added bonus, this makes u-boot's memory footprint a bit smaller,
although some functionality has been left out; all clocks are enabled
all the time, and there's no checking for gpio line conflicts.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sat, 18 Nov 2006 17:01:13 +0000 (18:01 +0100)]
AVR32: Clean up memory-map.h for at32ap7000
Convert spaces to tabs (must have missed this one last time around),
sort the entries by address and group them together by bus
connectivity.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
projects / platform / kernel / u-boot.git / log