drm/i915: Reuse the active golden render state batch

The golden render state is constant, but we recreate the batch setting
it up for every new context. If we keep that batch in a volatile cache
we can safely reuse it whenever we need to initialise a new context. We
mark the pages as purgeable and use the shrinker to recover pages from
the batch whenever we face memory pressues, recreating that batch afresh
on the next new context.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtien@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-8-chris@chris-wilson.co.uk

drm/i915: Introduce an internal allocator for disposable private objects

Quite a few of our objects used for internal hardware programming do not
benefit from being swappable or from being zero initialised. As such
they do not benefit from using a shmemfs backing storage and since they
are internal and never directly exposed to the user, we do not need to
worry about providing a filp. For these we can use an
drm_i915_gem_object wrapper around a sg_table of plain struct page. They
are not swap backed and not automatically pinned. If they are reaped
by the shrinker, the pages are released and the contents discarded. For
the internal use case, this is fine as for example, ringbuffers are
pinned from being written by a request to be read by the hardware. Once
they are idle, they can be discarded entirely. As such they are a good
match for execlist ringbuffers and a small variety of other internal
objects.

In the first iteration, this is limited to the scratch batch buffers we
use (for command parsing and state initialisation).

v2: Allocate physically contiguous pages, where possible.
v3: Reduce maximum order on subsequent requests following an allocation
failure.
v4: Fix up mismatch between swiotlb segment size and page count (it
counts in 2k units, not 4k pages)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk

drm/i915: Defer active reference until required

We only need the active reference to keep the object alive after the
handle has been deleted (so as to prevent a synchronous gem_close). Why
then pay the price of a kref on every execbuf when we can insert that
final active ref just in time for the handle deletion?

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-6-chris@chris-wilson.co.uk

drm/i915: Remove unused i915_gem_active_wait() in favour of _unlocked()

Since we only use the more generic unlocked variant, just rename it as
the normal i915_gem_active_wait(). The temporary cost is that we need to
always acquire the reference in a RCU safe manner, but the benefit is
that we will combine the common paths.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-5-chris@chris-wilson.co.uk

drm/i915: Rearrange i915_wait_request() accounting with callers

Our low-level wait routine has evolved from our generic wait interface
that handled unlocked, RPS boosting, waits with time tracking. If we
push our GEM fence tracking to use reservation_objects (required for
handling multiple timelines), we lose the ability to pass the required
information down to i915_wait_request(). However, if we push the extra
functionality from i915_wait_request() to the individual callsites
(i915_gem_object_wait_rendering and i915_gem_wait_ioctl) that make use
of those extras, we can both simplify our low level wait and prepare for
extending the GEM interface for use of reservation_objects.

v2: Rewrite i915_wait_request() kerneldocs

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-4-chris@chris-wilson.co.uk

drm/i915: Remove superfluous wait_for_error() from throttle-ioctl

The throttle-ioctl never touches the struct_mutex. It does, however, as
part of its ABI report whether the hardware is terminally wedged. For
that purposes, it only has to report the current state and not incur the
cost of checking/waiting every invocation, as we do not have to wait for
a reset before waiting on a request to ensure completion (that is baked
into the wait request implementation).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-3-chris@chris-wilson.co.uk

drm/i915: Allow i915_sw_fence_await_sw_fence() to allocate

In forthcoming patches, we want to be able to dynamically allocate the
wait_queue_t used whilst awaiting. This is more convenient if we extend
the i915_sw_fence_await_sw_fence() to perform the allocation for us if
we pass in a gfp mask as an alternative than a preallocated struct.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-2-chris@chris-wilson.co.uk

drm/i915: Support asynchronous waits on struct fence from i915_gem_request

We will need to wait on DMA completion (as signaled via struct fence)
before executing our i915_gem_request. Therefore we want to expose a
method for adding the await on the fence itself to the request.

v2: Add a comment detailing a failure to handle a signal-on-any
fence-array.
v3: Pretend that magic numbers don't exist.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-1-chris@chris-wilson.co.uk

drm/i915: Remove insert-page shortcut from execbuf relocate_iomap()

We are not allowed to touch the GTT entries underneath an atomic section,
as they take a rpm wakelock (which is illegal from atomic context) and
in the near future acquiring the DMA address for a page within an object
may sleep for an allocation. This makes the current shortcircuit in
relocation_iomap() for performing a second relocation on an adjacent page
illegal, and we need to release the atomic iomapping, lookup the DMA,
insert it into the GTT before reentering the atomic iomap section.

As it happens, this is precisely what we do on if we are using an
iomapping over the full object and not just a single page and by
removing the shortcut, we do the right thing.

Fixes: 9c870d03674f ("drm/i915: Use RPM as the barrier for controlling...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028142756.3850-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Use macro in place of open-coded for_each_universal_plane loop

This was the only use of (misleadingly-named) intel_num_planes()
function, so we can remove it as well.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477522291-10874-3-git-send-email-matthew.d.roper@intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915: Rename for_each_plane -> for_each_universal_plane

This macro's name is a bit misleading; it doesn't actually iterate over
all planes since it omits the cursor plane.  Its only uses are in gen9
code which is using it to iterate over the universal planes (which we
treat as primary+sprites); in these cases the legacy cursor registers
are programmed independently if necessary.  The macro's iterator value
(0 for primary plane, spritenum+1 for each secondary plane) also isn't
meaningful outside the gen9 context where the hardware considers them to
all be "universal" planes that follow this numbering.

This is just a renaming/clarification patch with no functional change.
However it will make the subsequent patches more clear.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477522291-10874-2-git-send-email-matthew.d.roper@intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915: Change the placement of some static functions in intel_dp.c

These static helper functions are required to be used during
fallback link rate implemnetation so they need to be placed at the top
of the file.

v3:
* Add cleanup to other patch (Mika Kahola)
v2:
* Dont move around functions declared in intel_drv.h (Rodrigo Vivi)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477524358-16563-4-git-send-email-manasi.d.navare@intel.com

drm/i915: Address broxton phy registers based on phy and channel number

The port registers related to the phys in broxton map to different
channels and specific phys. Make that mapping explicit.

v2: Pass enum dpio_phy to macros instead of mmio base. (Imre)

v3: Fix typo in macros. (Imre)

v4: Also change variables from u32 to enum dpio_phy. (Imre)
    Remove leftovers from previous version. (Imre)

v5: Actually git add the changes.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476863940-6019-1-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915: Add location of the Rcomp resistor to bxt_ddi_phy_info

Use struct bxt_ddi_phy_info to hold information of where the Rcomp
resistor is located, instead of hard coding it in the init sequence.

Note that this moves the enabling of the phy with the Rcomp resistor out
of the power well enable code. That should be safe since
bxt_ddi_phy_init() is called while the power domains lock is held, and
that is the only way that function gets called, so there is no
possibility of a concurrent phy enable caused by a power domain get
call.

v2: Replace comment about lock with lockdep_assert_held()  (Imre)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/62d209950ad48484564f3e793cf247cf62572a39.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

drm/i915: Create a struct to hold information about the broxton phys

Information about which phy is dual channel is hardcoded in the phy init
sequence. Split that to a separate struct so the init sequence is more
generic.

v2: Restore mangled part that ended up in following patch. (Imre)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/9102f4c984044126057e4fdd1b91a615ff25fae6.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

drm/i915: Move broxton vswing sequence to intel_dpio_phy.c

The vswing sequence is related to the DPIO phy, so move it closer to the
rest of DPIO phy related code.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/59aa5c85a115c5cbed81e793f20cd7b9f8de694b.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

drm/i915: Move DPIO phy documentation section to intel_dpio_phy.c

Move the DPIO phy documentation section to intel_dpio_phy.c, since that
is a more suitable place now that there is a source file dedicated for
those phys.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/55a2d38c15c06a8c5bce498b28decc03948f0224.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

drm/i915: Move broxton phy code to intel_dpio_phy.c

The phy in broxton is also a dpio phy, similar to cherryview but with
programming through MMIO. So move the code together with the other
similar phys.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/d611de6d256593cf904172db7ff27f164480c228.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

drm/i915: Pass lane count to bxt_ddi_phy_calc_lane_optmin_mask()

Pass lane count to bxt_ddi_phy_calc_lane_optmin_mask() instead of having
it extract that number from a pipe_config to decouple the phy code from
intel_crtc_state.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a4977e0207e594953c4f9d1b5f2ef972a8679e74.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

drm/i915: Explicitly map broxton DPIO power wells to phys

The mapping from the BXT_DPIO_CMN_* power wells to their respective phys
required a detour implemented in the bxt_power_well_to_phy() function.
Instead, embed that information directly into the power_well struct, by
resurrecting the data field.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/7fe97582fa08c7340ce6a3b6b0ea3e72a73182d7.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

drm/i915: Rename struct i915_power_well field data to id

Calling it data seems to imply arbitrary data can be associated with the
power well. However, that field is used for look ups and expected to be
unique, so rename it.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/f3916c3c5bfa793b0fc870fd44007a3ff425194d.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge latest drm-next to pull in the s/fence/dma_fence/ rework,
needed before we merge more i915 fencing patches.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Merge branch 'linux-4.9' of git://github.com/skeggsb/linux into drm-next

Karol's work which greatly improves volt/clock changes on a
heap of boards, nothing too exciting beyond a random collection of fixes.

* 'linux-4.9' of git://github.com/skeggsb/linux: (33 commits)
  drm/nouveau/fb/nv50: defer DMA mapping of scratch page to oneinit() hook
  drm/nouveau/fb/gf100: defer DMA mapping of scratch page to oneinit() hook
  drm/nouveau/pci: set streaming DMA mask early
  drm/nouveau/kms: add Maxwell to backlight initialization
  drm/nouveau/bar/nv50: fix bar2 vm size
  drm/nouveau/disp: remove unused function in sorg94.c
  drm/nouveau/volt: use kernel's 64-bit signed division function
  drm/nouveau/core: add missing header dependencies
  drm/nouveau/gr/nv3x: add 0x0597 kelvin 3d class support
  drm/nouveau/drm/nouveau: add a LED driver for the NVIDIA logo
  drm/nouveau/fb/ram: Use Kepler implementation on Maxwell
  drm/nouveau/volt: Make use of cvb coefficients
  drm/nouveau/volt/gf100-: Add speedo
  drm/nouveau/volt: Add implementation for gf100
  drm/nouveau/bios/vmap: unk0 field is the mode
  drm/nouveau/volt: Don't require perfect fit
  drm/nouveau/clk: Allow boosting only when NvBoost is set
  drm/nouveau/bios: Add parsing of VPSTATE table
  drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog
  drm/nouveau/clk: Fixup cstate selection
  ...

Merge tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel into drm-next

Pull request already again to get the s/fence/dma_fence/ stuff in and
allow everyone to resync. Otherwise really just misc stuff all over, and a
new bridge driver.

* tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel:
  drm/bridge: fix platform_no_drv_owner.cocci warnings
  drm/bridge: fix semicolon.cocci warnings
  drm: Print some debug/error info during DP dual mode detect
  drm: mark drm_of_component_match_add dummy inline
  drm/bridge: add Silicon Image SiI8620 driver
  dt-bindings: add Silicon Image SiI8620 bridge bindings
  video: add header file for Mobile High-Definition Link (MHL) interface
  drm: convert DT component matching to component_match_add_release()
  dma-buf: Rename struct fence to dma_fence
  dma-buf/fence: add an lockdep_assert_held()
  drm/dp: Factor out helper to distinguish between branch and sink devices
  drm/edid: Only print the bad edid when aborting
  drm/msm: add missing header dependencies
  drm/msm/adreno: move function declarations to header file
  drm/i2c/tda998x: mark symbol static where possible
  doc: add missing docbook parameter for fence-array
  drm: RIP mode_config->rotation_property
  drm/msm/mdp5: Advertize 180 degree rotation
  drm/msm/mdp5: Use per-plane rotation property

Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux into drm-next

First new feature pull for 4.10.  Highlights:
- Support for multple virtual displays in the virtual dce component
- New VM mgr to support non-contiguous vram buffers
- Support for UVD powergating on additional asics
- Power management improvements
- lots of code cleanup and bug fixes

* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (107 commits)
  drm/amdgpu: turn on/off uvd clock when dpm enable/disable on CI
  drm/amdgpu: disable dpm before turn off clock when vce idle.
  drm/amdgpu: enable uvd bypass mode for CI/VI.
  drm/amdgpu: just not load smc firmware if smu is already running
  drm/amdgpu: when suspend, set boot state instand of disable dpm.
  drm/amdgpu: use failed label to handle context init failure
  drm/amdgpu: add amdgpu_ttm_bo_eviction_valuable callback
  drm/ttm: make eviction decision a driver callback v2
  drm/ttm: fix coding style in ttm_bo_driver.h
  drm/radeon/pm: autoswitch power state when in balanced mode
  drm/amd/powerplay: fix spelling mistake and add KERN_WARNING to printks
  drm/amdgpu:new ids flag for preempt
  drm/amdgpu: mark symbols static where possible
  drm/amdgpu: change function declarations and add missing header dependencies
  drm/amdgpu: s/amdgpuCrtc/amdgpu_crtc/ in pageflip code
  drm/amdgpu/atom: remove a bunch of unused functions
  drm/amdgpu: consolidate atom scratch reg handling for hangs
  drm/amdgpu: use amdgpu_bo_[create|free]_kernel for wb
  drm/amdgpu: add VCE VM session tracking
  drm/amdgpu: improve parse_cs handling a bit
  ...

drm/amdgpu: turn on/off uvd clock when dpm enable/disable on CI

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable dpm before turn off clock when vce idle.

v2: move return value check as well

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable uvd bypass mode for CI/VI.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: just not load smc firmware if smu is already running

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: when suspend, set boot state instand of disable dpm.

fix pm-hibernate bug, when suspend/resume, dpm start failed.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use failed label to handle context init failure

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915: Correct pipe fault reporting string

Newline somehow ended up in the middle of the line.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477572512-4030-1-git-send-email-tvrtko.ursulin@linux.intel.com

Merge tag 'gvt-next-2016-10-27' of https://github.com/01org/gvt-linux into drm-intel-next-queued

gvt-next-2016-10-27

- Resolve current left build issue with ACPI=n and 32bit kernel
- TLB workaround from Arkadiusz
- vGPU reset fix from Ping
- workload scheduler nesting sleep fix from Changbin
- more misc fixes for sparse warnings and cleanups

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/bridge: fix platform_no_drv_owner.cocci warnings

drivers/gpu/drm/bridge/sil-sii8620.c:1556:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026165836.GA98766@lkp-sb04.lkp.intel.com

drm/bridge: fix semicolon.cocci warnings

drivers/gpu/drm/bridge/sil-sii8620.c:988:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026165836.GA98907@lkp-sb04.lkp.intel.com

drm/i915/gvt: fix nested sleeping issue

We cannot use blocking method mutex_lock inside a wait loop.
Here we invoke pick_next_workload() which needs acquire a
mutex in our "condition" experssion. Then we go into a another
of the going-to-sleep sequence and changing the task state.
This is a dangerous. Let's rewrite the wait sequence to avoid
nested sleeping.

v2: fix do...while loop exit condition (zhenyu)
v3: rebase to gvt-staging branch

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: throw error basing on execlist submit result

throw error message in elsp emulation handler basing on execlist
submit result. guest will trigger tdr process for recovering, gvt
just follow guest's desire.

v2: populate error to top of mmio emulation logic, comments from
zhenyu

Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: add full vGPU reset support

Full vGPU reset need to release all the shadow PPGGT pages to avoid
unnecessary write-protect and also should re-initialize pvinfo after
resetting vregs to keep pvinfo correct.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/DMC/KBL: Load DMC on KBL using the no_stepping_info array

Currently, for display there is only one DMC image for KBL.
Remove the stepping_info table for KBL and use the no_stepping_info
array for loading the firmware.

v2: Removed the block of code as pointed out by Rodrigo to make the
loads as generic as possible.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477355301-7035-1-git-send-email-anusha.srivatsa@intel.com

drm: Print some debug/error info during DP dual mode detect

There's at least one LSPCON device that occasionally returns an unexpected
adaptor ID which leads to a failed detect. Print some debug info to help
debugging this and future cases. Also print an error for an unexpected
adaptor ID, so users can report it.

v2:
- s/adapter/adaptor/ and add code comment about incorrect type 1 adaptor
  IDs. (Ville)

Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499359-12001-1-git-send-email-imre.deak@intel.com

drm: mark drm_of_component_match_add dummy inline

The newly added drm_of_component_match_add helper is defined as
'static' in a header when CONFIG_OF is disabled, causing a warning
each time the header is included:

In file included from /git/arm-soc/drivers/gpu/drm/bridge/dw-hdmi.c:23:0:
include/drm/drm_of.h:33:13: error: 'drm_of_component_match_add' defined but not used [-Werror=unused-function]

This marks it 'inline' like the other such helpers in this file.

Fixes: 97ac0e47aed5 ("drm: convert DT component matching to component_match_add_release()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026085759.3875472-1-arnd@arndb.de

drm/i915: Fix SKL+ 90/270 degree rotated plane coordinate computation

Pass the framebuffer size in .16 fixed point coordinates to
drm_rect_rotate() since that's what the source coordinates are as well
at this stage. We used to do this part of the computation in integer
coordinates, but that got changed when moving the computation to
happen in the check phase of the operation. Unfortunately I forgot
to shift up the fb width and height appropriately.

With the bogus size we ended up with some negative fb offset, which when
added to the vma offset caused out scanout to start at an offset earlier
than we inteded. Eg. when testing on my SKL I saw a row of incorrect
tiles at the top of my screen.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477325584-23679-1-git-send-email-ville.syrjala@linux.intel.com
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: fix comment on I915_{READ, WRITE}_FW

Comment mentioned use of intel_uncore_forcewake_irq{unlock, lock}
functions which are nonexistent (and never were).

The description was also incomplete and could cause confusion. Updated
comment is more elaborate on usage and caveats.

v2: mention __locked variant of intel_uncore_forcewake_{get,put} instead
    of plain ones

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilsono.c.uk>
[Mika: removed two superfluous lines on comment noted by Chris]
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477399682-3133-1-git-send-email-arkadiusz.hiler@intel.com

drm/i915/lspcon: Add workaround for resuming in PCON mode

On my APL the LSPCON firmware resumes in PCON mode as opposed to the
expected LS mode. It also appears to be in a state where AUX DPCD reads
will succeed but return garbage recovering only after a few hundreds of
milliseconds. After the recovery time DPCD reads will result in the
correct values and things will continue to work. If I2C over AUX is
attempted during this recovery time (implying an AUX write transaction)
the firmware won't recover and will stay in this broken state.

As a workaround check if the firmware is in PCON state after resume and
if so wait until the correct DPCD values are returned. For this we
compare the branch descriptor with the one we cached during init time.
If the firmware was in the LS state, we skip the w/a and continue as
before.

v2:
- Use the DP descriptor value cached in intel_dp. (Jani)
- Get to intel_dp using container_of(), instead of a cached ptr.
  (Shashank)
- Use usleep_range() instead of msleep().

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98353
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-9-git-send-email-imre.deak@intel.com

drm/i915/lspcon: Get DDC adapter via container_of() instead of cached ptr

We can use the container_of() magic to get to the DDC adapter, so no
need for caching a pointer to it. We'll also need to get at the intel_dp
ptr in the following patch, so add a helper that can be used for both
purposes.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-8-git-send-email-imre.deak@intel.com

drm/i915/dp: Read DP descriptor for eDP and LSPCON too

As for external DP sink and branch devices read and print the DP
descriptor for eDP and LSPCON devices as well to aid debugging.

v2:
- Split out this change to a separate patch. (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-7-git-send-email-imre.deak@intel.com

drm/i915/lspcon: Fail LSPCON probe if the start of DPCD can't be read

All types of DP devices (eDP, DP sink, DP branch) will fail their probe
if the start of DPCD can't be read. The LSPCON PCON functionality also
depends on accessing this area, so fail the probe if the read fails.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-6-git-send-email-imre.deak@intel.com

drm/i915/dp: Print full branch/sink descriptor

Extend the branch/sink descriptor info with the missing device ID
field. While at it also read out all the descriptor registers in one
transfer and make the debug print more compact.

v2: (Jani)
- Cache the descriptor in intel_dp.
- Split out this change into a separate patch.
v3: (Jani)
- Fix return value check of __intel_dp_read_desc().
- Use %pE instead of %s to print the device ID.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477401159-15098-1-git-send-email-imre.deak@intel.com

drm/i915/dp: Print only sink or branch specific OUI based on dev type

There are two separate sets of DPCD registers for the DP OUI - as well as
for the device ID and HW/SW revision - based on whether the given DP
device is a branch or a sink. Currently we print both branch and sink
OUIs, for consistency print only the one that corresponds to the
probed device.

v2:
- Split out this change into a separate patch. (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-4-git-send-email-imre.deak@intel.com

drm/i915/dp: Remove debug dependency of DPCD SW/HW revision read

Performing DPCD AUX reads based on debug settings may introduce obscure
bugs in other places that depend on the read being done (or being not
done). To reduce the uncertainty perform the reads unconditionally.

Cc: Mika Kahola <mika.kahola@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-3-git-send-email-imre.deak@intel.com

drm/dp: Factor out helper to distinguish between branch and sink devices

This check is open-coded in a few places, so it makes sense to simplify
things by having a helper for it similar to the rest of DPCD feature
helpers.

v2: (Jani)
- Move the helper to drm_dp_helper.h.
- Split out this change to a separate patch.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-2-git-send-email-imre.deak@intel.com

drm/i915/audio: set proper N/M in modeset

When modeset occurs and the LS_CLK is set to some special values in DP
mode, the N/M need to be set manually if audio is playing. Otherwise the
first several seconds may be silent in audio playback.

The relationship of Maud and Naud is expressed in the following
equation:

Maud/Naud = 512 * fs / f_LS_Clk

Please refer VESA DisplayPort Standard spec for details.

v2 by Jani:
- organize Maud/Naud table according to DP 1.4 spec
- add 64k and 128k audio rates
- update HSW_AUD_M_CTS_ENABLE register when Maud not found
- remove extra checks for port clock
- simplify Maud/Naud lookup
- reset patch author back to Libin

Cc: "Zhang, Keqiao" <keqiao.zhang@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: "Lin, Mengdong" <mengdong.lin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477407258-30599-3-git-send-email-jani.nikula@intel.com

drm/i915/audio: drop extra crtc clock check from HDMI audio N lookup

The array contains the crtc clock, rely on that. While at it, debug log
the HDMI N value or automatic mode.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: "Lin, Mengdong" <mengdong.lin@intel.com>
Cc: Libin Yang <libin.yang@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477407258-30599-2-git-send-email-jani.nikula@intel.com

drm/i915: Refresh that status of MST capable connectors in ->detect()

Once we've determined that the sink is MST capable we never end up
running through the full detect cycle again, despite getting HPDs.
Fix tht by ripping out the incorrect piece of code responsible.

This got broken when I moved the long HPD handling to the ->detect()
hook, but failed to remove the leftover code.

Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Rui Tiago Matos <tiagomatos@gmail.com>
Tested-by: Rui Tiago Matos <tiagomatos@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
References: https://bugs.freedesktop.org/show_bug.cgi?id=98306
Fixes: 27d4efc5591a ("drm/i915: Move long hpd handling into the hotplug work")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477057478-29328-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Remove two invalid warns

Objects can have multiple VMAs used for display in which
case assertion that objects must not be pinned for display
more times than the current VMA is incorrect.

v2: Commit message update. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 058d88c4330f ("drm/i915: Track pinned VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Rotated view does not need a fence

We do not need to set up a fence for the rotated view.

Display does not need it and no one can access it.

v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 05a20d098db1 ("drm/i915: Move map-and-fenceable tracking to the VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/bridge: add Silicon Image SiI8620 driver

SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476085157-5266-1-git-send-email-a.hajda@samsung.com

drm/i915/gvt: correct the reset logic

The current_vgpu will set to NULL after stopping the scheduler when
the reset is triggered by current vgpu, so here need change the
judgement condition for current vgpu detection.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: add vreg write for GDRST handler

The emulation handler for MMIO GDRST miss vreg write in it, as result
the vreg cannot update correspondingly.

Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: fix detect_host calling logic

Like other routines, intel_gvt_hypervisor_detect_host returns 0
for success.

Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: fix an typo in skl_decode_mi_display_flip

Fix type to set correct pipe number.

Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

dt-bindings: add Silicon Image SiI8620 bridge bindings

SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0. It is controlled
via I2C bus.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1475823762-16237-3-git-send-email-a.hajda@samsung.com

video: add header file for Mobile High-Definition Link (MHL) interface

This header adds definitions specific to MHL protocol.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1475823762-16237-2-git-send-email-a.hajda@samsung.com

drm/i915/guc: WA to address the Ringbuffer coherency issue

Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are
pinned in mappable aperture portion of GGTT and for ringbuffer pages
allocated from Stolen memory, access can only be done through GMADR BAR.
In case of GuC based submission, updates done in ringbuffer via GMADR
may not get committed to memory by the time the Command streamer starts
reading them, resulting in fetching of stale data.

For Host based submission, such problem is not there as the write to Ring
Tail or ELSP register happens from the Host side prior to submission.
Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already
enforces the ordering between outstanding GMADR writes & new GTTMADR access.
MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to
registers within GT is contained within GT, so ordering is not enforced
resulting in a race, which can manifest in form of a hang.

To ensure the flush of in-flight GMADR writes, a POSTING READ is done to
GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(),
which takes care of GMADR writes from User space to GEM buffers, but not the
ringbuffer writes from KMD.
This WA is needed on all recent HW.

v2:
- Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie
  in any forcewake domain range and so the overhead of spinlock & search
  in the forcewake table is avoidable. (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413323-1880-1-git-send-email-akash.goel@intel.com

drm/amdgpu: add amdgpu_ttm_bo_eviction_valuable callback

This way we can correctly check split VRAM buffers as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: make eviction decision a driver callback v2

This way the driver can decide if it is valuable to evict a BO or not.

The current implementation is added as default to all existing drivers.

v2: fix some typos found during internal testing

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: fix coding style in ttm_bo_driver.h

A few 80chars issues and spaces at wrong places.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/pm: autoswitch power state when in balanced mode

The current default of always using the performance power state leads
to increased power consumption of mobile devices, which have a dedicated
battery power state. Switch between the performance and battery power
state automatically, dpending on the current AC power status, when the
user asked for the balanced power state.

The user can still override this logic by asking for the performance
or battery power state explicitly.

Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix spelling mistake and add KERN_WARNING to printks

Fix trivial spelling mistake cant't -> can't and add KERN_WARNING to
printk messages.  Remove redundant spaces before \n too (thanks to
Joe Perches for spotting those).

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:new ids flag for preempt

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: mark symbols static where possible

We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/si.c:908:5: warning: no previous prototype for 'si_pciep_rreg' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/si.c:921:6: warning: no previous prototype for 'si_pciep_wreg' [-Wmissing-prototypes]

In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.

Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change function declarations and add missing header dependencies

We get a few warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/atombios_crtc.c:38:6: warning: no previous prototype for 'amdgpu_atombios_crtc_overscan_setup' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/dce_v8_0.c:661:6: warning: no previous prototype for 'dce_v8_0_disable_dce' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:40:5: warning: no previous prototype for 'amdgpu_gfx_scratch_get' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:62:6: warning: no previous prototype for 'amdgpu_gfx_scratch_free' [-Wmissing-prototypes]
....

In fact, these functions are declared in
drivers/gpu/drm/amd/amdgpu/atombios_crtc.h
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
drivers/gpu/drm/amd/amdgpu/dce_v8_0.h
drivers/gpu/drm/amd/amdgpu/dce_v10_0.h
drivers/gpu/drm/amd/amdgpu/dce_v11_0.h
drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h.
So this patch adds missing header dependencies.

By the way, this patch changes declaration of amdgpu_gfx_parse_disable_cu()
to subject to its implement, and clean three function declarations
in pp_acpi.h up.

Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: s/amdgpuCrtc/amdgpu_crtc/ in pageflip code

Fix random CamelCase that has annoyed me for a while.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/atom: remove a bunch of unused functions

Leftovers from the radeon.

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: consolidate atom scratch reg handling for hangs

Move from asic specific code to common atom code.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use amdgpu_bo_[create|free]_kernel for wb

Rather than open coding it.

Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCE VM session tracking

Fix the problems with killing VCE sessions in VM mode.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: improve parse_cs handling a bit

This way we can use parse_cs and still keep VM mode enabled.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine set power state logic for dpm.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update current ps/requeset ps in adev with real ps.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add an implement for check_power_state equal for KV

KV/KB/ML was missed these was implemented for other asics.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add an implement for check_power_state equal for Si.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add an implement for check_power_state equal for Cz.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add an implement for check_power_state equal for CI

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new callback to check power state info

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: check min clock set by DAL before set ps.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Put in rest of wave fields

Add the rest of the basic SQ WAVE fields to
finish off the implementation.  Eventually,
a separate interface will be needed for GPRs.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: re-factor debugfs wave reader

Move IP version specific code into a callback.

Also add support for gfx7 devices.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Make debugfs write compliment read

Add PG lock support as well as bank selection to
the MMIO write function.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Allow broadcast on debugfs read (v2)

Allow any of the se/sh/instance fields to be
specified as a broadcast by submitting 0x3FF.

(v2) Fix broadcast range checking

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix debugfs wave reader

On non VI/CZ platforms it would not free
the grbm index lock.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add wave reader to debugfs

Currently supports CZ/VI.  Allows nearly atomic read
of wave data from GPU.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rework IP block registration (v2)

This makes it easier to replace specific IP blocks on
asics for handling virtual_dce, DAL, etc. and for building
IP lists for hw or tables.  This also stored the status
information in the same structure.

v2: split out spelling fix into a separate patch
    add a function to add IPs to the list

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: fix spelling in amdgpu_powerplay.h

and update a comment as well.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virtual_dce: move define into source file

It's not used outside the file.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable virtual dce on SI

Add the proper IP module when requested.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fill in vce clock info ioctl query (v2)

Returns the vce clock table for the user mode driver.
The user mode driver can fill this data into vce clock
data packet for optimal VCE DPM.

v2: update to the new API

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add an implementation for get_vce_clock_state (v3)

Used by the powerplay dpm code.

v2: update to the new API
v3: drop old include

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dpm: add an implementation for get_vce_clock_state (v2)

Used by the non-powerplay dpm code.

v2: update to the new API

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dpm: add new callback to fetch vce clock state (v2)

Will be used by the new info ioctl query.

v2: fetch a single state per request

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>