clk: samsung: Fix memory leak in _samsung_clk_register_pll()

[ Upstream commit 5174e5b0d1b669a489524192b6adcbb3c54ebc72 ]

If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.

Fixes: 3ff6e0d8d64d ("clk: samsung: Add support to register rate_table for samsung plls")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123032015.63980-1-xiujianfeng@huawei.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: coda: Add check for kmalloc

[ Upstream commit 6e5e5defdb8b0186312c2f855ace175aee6daf9b ]

As the kmalloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.

Fixes: cb1d3a336371 ("[media] coda: add CODA7541 JPEG support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: coda: Add check for dcoda_iram_alloc

[ Upstream commit 6b8082238fb8bb20f67e46388123e67a5bbc558d ]

As the coda_iram_alloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.

Fixes: b313bcc9a467 ("[media] coda: simplify IRAM setup")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: c8sectpfe: Add of_node_put() when breaking out of loop

[ Upstream commit 63ff05a1ad242a5a0f897921c87b70d601bda59c ]

In configure_channels(), we should call of_node_put() when breaking
out of for_each_child_of_node() which will automatically increase
and decrease the refcount.

Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe()

[ Upstream commit cf34ac6aa2b12fb0c3aacfdcae8acd7904b949ec ]

The reg_node needs to be released through of_node_put() in the error
handling path when of_irq_get_byname() failed.

Fixes: 390af53e0411 ("regulator: qcom-labibb: Implement short-circuit and over-current IRQs")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221203062109.115043-1-yuancan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: core: Normalize the error handling branch in sd_read_ext_regs()

[ Upstream commit fc02e2b52389c8fde02852b2f959c0b45f042bbd ]

Let's use pr_err() to output the error messages and let's extend a comment
to clarify why returning 0 (success) in one case make sense.

Fixes: c784f92769ae ("mmc: core: Read the SD function extension registers for power management")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[Ulf: Clarified the comment and the commit-msg]
Link: https://lore.kernel.org/r/20221130134920.2109-1-thunder.leizhen@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memstick/ms_block: Add check for alloc_ordered_workqueue

[ Upstream commit 4f431a047a5c8698ed4b67e2760cfbeb5fffb69d ]

As the alloc_ordered_workqueue may return NULL pointer, it should be better
to add check for the return value. Moreover, the msb->io_queue should be
freed if error occurs later.

Fixes: 0ab30494bc4f ("memstick: add support for legacy memorysticks")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221126012558.34374-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memstick: ms_block: Add error handling support for add_disk()

[ Upstream commit 2304c55fd506fcd5e1a59ae21a306ee82507340b ]

We never checked for errors on add_disk() as this function returned void.
Now that this is fixed, use the shiny new error handling.

Contrary to the typical removal which delays the put_disk() until later,
since we are failing on a probe we immediately put the disk on failure from
add_disk by using blk_cleanup_disk().

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210902174105.2418771-3-mcgrof@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 4f431a047a5c ("memstick/ms_block: Add check for alloc_ordered_workqueue")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: renesas_sdhi: alway populate SCC pointer

[ Upstream commit 3d4f9898c1c74323dd61d6a8a0efca9401232ad4 ]

We need the SCC pointer to reset the device, so populate it even when we
don't need it for tuning.

Fixes: 45bffc371fef ("mmc: renesas_sdhi: only reset SCC when its pointer is populated")
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: mmci: fix return value check of mmc_add_host()

[ Upstream commit b38a20f29a49ae04d23750d104b25400b792b98c ]

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

So fix this by checking the return value and goto error path which
will call mmc_free_host().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109133539.3275664-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: wbsd: fix return value check of mmc_add_host()

[ Upstream commit dc5b9b50fc9d1334407e316e6e29a5097ef833bd ]

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

So fix this by checking the return value and goto error path which
will call mmc_free_host(), besides, other resources also need be
released.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109133237.3273558-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: via-sdmmc: fix return value check of mmc_add_host()

[ Upstream commit e4e46fb61e3bb4628170810d3f2b996b709b90d9 ]

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

Fix this by checking the return value and goto error path which
will call mmc_free_host().

Fixes: f0bf7f61b840 ("mmc: Add new via-sdmmc host controller driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221108130949.1067699-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: meson-gx: fix return value check of mmc_add_host()

[ Upstream commit 90935f16f2650ab7416fa2ffbe5c28cb39cf3f1e ]

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

Fix this by checking the return value and goto error path which
will call mmc_free_host().

Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221108123417.479045-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: omap_hsmmc: fix return value check of mmc_add_host()

[ Upstream commit a525cad241c339ca00bf7ebf03c5180f2a9b767c ]

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

Fix this by checking the return value and goto error path wihch
will call mmc_free_host().

Fixes: a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221108121316.340354-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: atmel-mci: fix return value check of mmc_add_host()

[ Upstream commit 9e6e8c43726673ca2abcaac87640b9215fd72f4c ]

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

So fix this by checking the return value and calling mmc_free_host()
in the error path.

Fixes: 7d2be0749a59 ("atmel-mci: Driver for Atmel on-chip MMC controllers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221108122819.429975-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: wmt-sdmmc: fix return value check of mmc_add_host()

[ Upstream commit 29276d56f6ed138db0f38cd31aedc0b725c8c76c ]

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, clk_disable_unprepare() also needs be called.

Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-10-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: vub300: fix return value check of mmc_add_host()

[ Upstream commit 0613ad2401f88bdeae5594c30afe318e93b14676 ]

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, the timer added before mmc_add_host() needs be del.

And this patch fixes another missing call mmc_free_host() if usb_control_msg()
fails.

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-9-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: toshsd: fix return value check of mmc_add_host()

[ Upstream commit f670744a316ea983113a65313dcd387b5a992444 ]

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, free_irq() also needs be called.

Fixes: a5eb8bbd66cc ("mmc: add Toshiba PCI SD controller driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-8-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()

[ Upstream commit fc38a5a10e9e5a75eb9189854abeb8405b214cc9 ]

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and calling mmc_free_host() in the
error path, besides, led_classdev_unregister() and pm_runtime_disable() also
need be called.

Fixes: c7f6558d84af ("mmc: Add realtek USB sdmmc host driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-7-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: rtsx_pci: fix return value check of mmc_add_host()

[ Upstream commit 0c87db77423a282b3b38b8a6daf057b822680516 ]

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and calling mmc_free_host() in the
error path, beside, runtime PM also needs be disabled.

Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-6-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: pxamci: fix return value check of mmc_add_host()

[ Upstream commit 80e1ef3afb8bfbe768380b70ffe1b6cab87d1a3b ]

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, ->exit() need be called to uninit the pdata.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-5-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: mxcmmc: fix return value check of mmc_add_host()

[ Upstream commit cde600af7b413c9fe03e85c58c4279df90e91d13 ]

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host().

Fixes: d96be879ff46 ("mmc: Add a MX2/MX3 specific SDHC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-4-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: moxart: fix return value check of mmc_add_host()

[ Upstream commit 0ca18d09c744fb030ae9bc5836c3e357e0237dea ]

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host().

Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-3-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: alcor: fix return value check of mmc_add_host()

[ Upstream commit e93d1468f429475a753d6baa79b853b7ee5ef8c0 ]

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and calling mmc_free_host() in the
error path.

Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-2-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv, bpf: Emit fixed-length instructions for BPF_PSEUDO_FUNC

[ Upstream commit b54b6003612a376e7be32cbc5c1af3754bbbbb3d ]

For BPF_PSEUDO_FUNC instruction, verifier will refill imm with
correct addresses of bpf_calls and then run last pass of JIT.
Since the emit_imm of RV64 is variable-length, which will emit
appropriate length instructions accorroding to the imm, it may
broke ctx->offset, and lead to unpredictable problem, such as
inaccurate jump. So let's fix it with fixed-length instructions.

Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Suggested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20221206091410.1584784-1-pulehui@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.x: Fail client initialisation if state manager thread can't run

[ Upstream commit b4e4f66901658fae0614dea5bf91062a5387eda7 ]

If the state manager thread fails to start, then we should just mark the
client initialisation as failed so that other processes or threads don't
get stuck in nfs_wait_client_init_complete().

Reported-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Fixes: 4697bd5e9419 ("NFSv4: Fix a race in the net namespace mount notification")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix missing release socket in rpc_sockname()

[ Upstream commit 50fa355bc0d75911fe9d5072a5ba52cdb803aff7 ]

socket dynamically created is not released when getting an unintended
address family type in rpc_sockname(), direct to out_release for calling
sock_release().

Fixes: 2e738fdce22f ("SUNRPC: Add API to acquire source address")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()

[ Upstream commit 9181f40fb2952fd59ecb75e7158620c9c669eee3 ]

If rdma receive buffer allocate failed, should call rpcrdma_regbuf_free()
to free the send buffer, otherwise, the buffer data will be leaked.

Fixes: bb93a1ae2bf4 ("xprtrdma: Allocate req's regbufs at xprt create time")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt

[ Upstream commit cf2ea3c86ad90d63d1c572b43e1ca9276b0357ad ]

I got a null-ptr-defer error report when I do the following tests
on the qemu platform:

make defconfig and CONFIG_PARPORT=m, CONFIG_PARPORT_PC=m,
CONFIG_SND_MTS64=m

Then making test scripts:
cat>test_mod1.sh<<EOF
modprobe snd-mts64
modprobe snd-mts64
EOF

Executing the script, perhaps several times, we will get a null-ptr-defer
report, as follow:

syzkaller:~# ./test_mod.sh
snd_mts64: probe of snd_mts64.0 failed with error -5
modprobe: ERROR: could not insert 'snd_mts64': No such device
 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD 0 P4D 0
 Oops: 0002 [#1] PREEMPT SMP PTI
 CPU: 0 PID: 205 Comm: modprobe Not tainted 6.1.0-rc8-00588-g76dcd734eca2 #6
 Call Trace:
  <IRQ>
  snd_mts64_interrupt+0x24/0xa0 [snd_mts64]
  parport_irq_handler+0x37/0x50 [parport]
  __handle_irq_event_percpu+0x39/0x190
  handle_irq_event_percpu+0xa/0x30
  handle_irq_event+0x2f/0x50
  handle_edge_irq+0x99/0x1b0
  __common_interrupt+0x5d/0x100
  common_interrupt+0xa0/0xc0
  </IRQ>
  <TASK>
  asm_common_interrupt+0x22/0x40
 RIP: 0010:_raw_write_unlock_irqrestore+0x11/0x30
  parport_claim+0xbd/0x230 [parport]
  snd_mts64_probe+0x14a/0x465 [snd_mts64]
  platform_probe+0x3f/0xa0
  really_probe+0x129/0x2c0
  __driver_probe_device+0x6d/0xc0
  driver_probe_device+0x1a/0xa0
  __device_attach_driver+0x7a/0xb0
  bus_for_each_drv+0x62/0xb0
  __device_attach+0xe4/0x180
  bus_probe_device+0x82/0xa0
  device_add+0x550/0x920
  platform_device_add+0x106/0x220
  snd_mts64_attach+0x2e/0x80 [snd_mts64]
  port_check+0x14/0x20 [parport]
  bus_for_each_dev+0x6e/0xc0
  __parport_register_driver+0x7c/0xb0 [parport]
  snd_mts64_module_init+0x31/0x1000 [snd_mts64]
  do_one_initcall+0x3c/0x1f0
  do_init_module+0x46/0x1c6
  load_module+0x1d8d/0x1e10
  __do_sys_finit_module+0xa2/0xf0
  do_syscall_64+0x37/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
 Kernel panic - not syncing: Fatal exception in interrupt
 Rebooting in 1 seconds..

The mts wa not initialized during interrupt,  we add check for
mts to fix this bug.

Fixes: 68ab801e32bb ("[ALSA] Add snd-mts64 driver for ESI Miditerminal 4140")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221206061004.1222966-1-cuigaosheng1@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: saa7164: fix missing pci_disable_device()

[ Upstream commit 57fb35d7542384cac8f198cd1c927540ad38b61a ]

Add missing pci_disable_device() in the error path in saa7164_initdev().

Fixes: 443c1228d505 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: pcm: Set missing stop_operating flag at undoing trigger start

[ Upstream commit 5c8cc93b06d1ff860327a273abf3ac006290d242 ]

When a PCM trigger-start fails at snd_pcm_do_start(), PCM core tries
to undo the action at snd_pcm_undo_start() by issuing the trigger STOP
manually.  At that point, we forgot to set the stop_operating flag,
hence the sync-stop won't be issued at the next prepare or other
calls.

This patch adds the missing stop_operating flag at
snd_pcm_undo_start().

Fixes: 1e850beea278 ("ALSA: pcm: Add the support for sync-stop operation")
Link: https://lore.kernel.org/r/b4e71631-4a94-613-27b2-fb595792630@carlh.net
Link: https://lore.kernel.org/r/20221205132124.11585-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: fix race in sock_map_free()

[ Upstream commit 0a182f8d607464911756b4dbef5d6cad8de22469 ]

sock_map_free() calls release_sock(sk) without owning a reference
on the socket. This can cause use-after-free as syzbot found [1]

Jakub Sitnicki already took care of a similar issue
in sock_hash_free() in commit 75e68e5bf2c7 ("bpf, sockhash:
Synchronize delete from bucket list on map free")

[1]
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 3785 at lib/refcount.c:31 refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 3785 Comm: kworker/u4:6 Not tainted 6.1.0-rc7-syzkaller-00103-gef4d3ea40565 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: events_unbound bpf_map_free_deferred
RIP: 0010:refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31
Code: 68 8b 31 c0 e8 75 71 15 fd 0f 0b e9 64 ff ff ff e8 d9 6e 4e fd c6 05 62 9c 3d 0a 01 48 c7 c7 80 bb 68 8b 31 c0 e8 54 71 15 fd <0f> 0b e9 43 ff ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a2 fe ff
RSP: 0018:ffffc9000456fb60 EFLAGS: 00010246
RAX: eae59bab72dcd700 RBX: 0000000000000004 RCX: ffff8880207057c0
RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000
RBP: 0000000000000004 R08: ffffffff816fdabd R09: fffff520008adee5
R10: fffff520008adee5 R11: 1ffff920008adee4 R12: 0000000000000004
R13: dffffc0000000000 R14: ffff88807b1c6c00 R15: 1ffff1100f638dcf
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30c30000 CR3: 000000000d08e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
__sock_put include/net/sock.h:779 [inline]
tcp_release_cb+0x2d0/0x360 net/ipv4/tcp_output.c:1092
release_sock+0xaf/0x1c0 net/core/sock.c:3468
sock_map_free+0x219/0x2c0 net/core/sock_map.c:356
process_one_work+0x81c/0xd10 kernel/workqueue.c:2289
worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
kthread+0x266/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>

Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20221202111640.2745533-1-edumazet@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (jc42) Restore the min/max/critical temperatures on resume

[ Upstream commit 084ed144c448fd5bc8ed5a58247153fbbfd115c3 ]

The JC42 compatible thermal sensor on Kingston KSM32ES8/16ME DIMMs
(using Micron E-Die) is an ST Microelectronics STTS2004 (manufacturer
0x104a, device 0x2201). It does not keep the previously programmed
minimum, maximum and critical temperatures after system suspend and
resume (which is a shutdown / startup cycle for the JC42 temperature
sensor). This results in an alarm on system resume because the hardware
default for these values is 0°C (so any environment temperature greater
than 0°C will trigger the alarm).

Example before system suspend:
  jc42-i2c-0-1a
  Adapter: SMBus PIIX4 adapter port 0 at 0b00
  temp1:        +34.8°C  (low  =  +0.0°C)
                         (high = +85.0°C, hyst = +85.0°C)
                         (crit = +95.0°C, hyst = +95.0°C)

Example after system resume (without this change):
  jc42-i2c-0-1a
  Adapter: SMBus PIIX4 adapter port 0 at 0b00
  temp1:        +34.8°C  (low  =  +0.0°C)             ALARM (HIGH, CRIT)
                         (high =  +0.0°C, hyst =  +0.0°C)
                         (crit =  +0.0°C, hyst =  +0.0°C)

Apply the cached values from the JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER, JC42_REG_TEMP_CRITICAL and JC42_REG_SMBUS (where
the SMBUS register is not related to this issue but a side-effect of
using regcache_sync() during system resume with the previously
cached/programmed values. This fixes the alarm due to the hardware
defaults of 0°C because the previously applied limits (set by userspace)
are re-applied on system resume.

Fixes: 175c490c9e7f ("hwmon: (jc42) Add support for STTS2004 and AT30TSE004")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-3-martin.blumenstingl@googlemail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (jc42) Convert register access and caching to regmap/regcache

[ Upstream commit 8f2fa4726faf01094d7a5be7bd0c120c565f54d9 ]

Switch the jc42 driver to use an I2C regmap to access the registers.
Also move over to regmap's built-in caching instead of adding a
custom caching implementation. This works for JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER and JC42_REG_TEMP_CRITICAL as these values never
change except when explicitly written. The cache For JC42_REG_TEMP is
dropped (regmap can't cache it because it's volatile, meaning it can
change at any time) as well for simplicity and consistency with other
drivers.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-2-martin.blumenstingl@googlemail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 084ed144c448 ("hwmon: (jc42) Restore the min/max/critical temperatures on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: fix resource leak in regulator_register()

[ Upstream commit ba62319a42c50e6254e98b3f316464fac8e77968 ]

I got some resource leak reports while doing fault injection test:

  OF: ERROR: memory leak, expected refcount 1 instead of 100,
  of_node_get()/of_node_put() unbalanced - destroy cset entry:
  attach overlay node /i2c/pmic@64/regulators/buck1

unreferenced object 0xffff88810deea000 (size 512):
  comm "490-i2c-rt5190a", pid 253, jiffies 4294859840 (age 5061.046s)
  hex dump (first 32 bytes):
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
    ff ff ff ff ff ff ff ff a0 1e 00 a1 ff ff ff ff  ................
  backtrace:
    [<00000000d78541e2>] kmalloc_trace+0x21/0x110
    [<00000000b343d153>] device_private_init+0x32/0xd0
    [<00000000be1f0c70>] device_add+0xb2d/0x1030
    [<00000000e3e6344d>] regulator_register+0xaf2/0x12a0
    [<00000000e2f5e754>] devm_regulator_register+0x57/0xb0
    [<000000008b898197>] rt5190a_probe+0x52a/0x861 [rt5190a_regulator]

unreferenced object 0xffff88810b617b80 (size 32):
  comm "490-i2c-rt5190a", pid 253, jiffies 4294859904 (age 5060.983s)
  hex dump (first 32 bytes):
    72 65 67 75 6c 61 74 6f 72 2e 32 38 36 38 2d 53  regulator.2868-S
    55 50 50 4c 59 00 ff ff 29 00 00 00 2b 00 00 00  UPPLY...)...+...
  backtrace:
    [<000000009da9280d>] __kmalloc_node_track_caller+0x44/0x1b0
    [<0000000025c6a4e5>] kstrdup+0x3a/0x70
    [<00000000790efb69>] create_regulator+0xc0/0x4e0
    [<0000000005ed203a>] regulator_resolve_supply+0x2d4/0x440
    [<0000000045796214>] regulator_register+0x10b3/0x12a0
    [<00000000e2f5e754>] devm_regulator_register+0x57/0xb0
    [<000000008b898197>] rt5190a_probe+0x52a/0x861 [rt5190a_regulator]

After calling regulator_resolve_supply(), the 'rdev->supply' is set
by set_supply(), after this set, in the error path, the resources
need be released, so call regulator_put() to avoid the leaks.

Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Fixes: 8a866d527ac0 ("regulator: core: Resolve supply name earlier to prevent double-init")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221202025111.496402-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

configfs: fix possible memory leak in configfs_create_dir()

[ Upstream commit c65234b283a65cfbfc94619655e820a5e55199eb ]

kmemleak reported memory leaks in configfs_create_dir():

unreferenced object 0xffff888009f6af00 (size 192):
  comm "modprobe", pid 3777, jiffies 4295537735 (age 233.784s)
  backtrace:
    kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273)
    new_fragment (./include/linux/slab.h:600 fs/configfs/dir.c:163)
    configfs_register_subsystem (fs/configfs/dir.c:1857)
    basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic
    do_one_initcall (init/main.c:1296)
    do_init_module (kernel/module/main.c:2455)
    ...

unreferenced object 0xffff888003ba7180 (size 96):
  comm "modprobe", pid 3777, jiffies 4295537735 (age 233.784s)
  backtrace:
    kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273)
    configfs_new_dirent (./include/linux/slab.h:723 fs/configfs/dir.c:194)
    configfs_make_dirent (fs/configfs/dir.c:248)
    configfs_create_dir (fs/configfs/dir.c:296)
    configfs_attach_group.isra.28 (fs/configfs/dir.c:816 fs/configfs/dir.c:852)
    configfs_register_subsystem (fs/configfs/dir.c:1881)
    basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic
    do_one_initcall (init/main.c:1296)
    do_init_module (kernel/module/main.c:2455)
    ...

This is because the refcount is not correct in configfs_make_dirent().
For normal stage, the refcount is changing as:

configfs_register_subsystem()
  configfs_create_dir()
    configfs_make_dirent()
      configfs_new_dirent() # set s_count = 1
      dentry->d_fsdata = configfs_get(sd); # s_count = 2
...
configfs_unregister_subsystem()
  configfs_remove_dir()
    remove_dir()
      configfs_remove_dirent() # s_count = 1
    dput() ...
      *dentry_unlink_inode()*
        configfs_d_iput() # s_count = 0, release

However, if we failed in configfs_create():

configfs_register_subsystem()
  configfs_create_dir()
    configfs_make_dirent() # s_count = 2
    ...
    configfs_create() # fail
    ->out_remove:
    configfs_remove_dirent(dentry)
      configfs_put(sd) # s_count = 1
      return PTR_ERR(inode);

There is no inode in the error path, so the configfs_d_iput() is lost
and makes sd and fragment memory leaked.

To fix this, when we failed in configfs_create(), manually call
configfs_put(sd) to keep the refcount correct.

Fixes: 7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hsr: Synchronize sequence number updates.

[ Upstream commit 5c7aa13210c3abdd34fd421f62347665ec6eb551 ]

hsr_register_frame_out() compares new sequence_nr vs the old one
recorded in hsr_node::seq_out and if the new sequence_nr is higher then
it will be written to hsr_node::seq_out as the new value.

This operation isn't locked so it is possible that two frames with the
same sequence number arrive (via the two slave devices) and are fed to
hsr_register_frame_out() at the same time. Both will pass the check and
update the sequence counter later to the same value. As a result the
content of the same packet is fed into the stack twice.

This was noticed by running ping and observing DUP being reported from
time to time.

Instead of using the hsr_priv::seqnr_lock for the whole receive path (as
it is for sending in the master node) add an additional lock that is only
used for sequence number checks and updates.

Add a per-node lock that is used during sequence number reads and
updates.

Fixes: f421436a591d3 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hsr: Synchronize sending frames to have always incremented outgoing seq nr.

[ Upstream commit 06afd2c31d338fa762548580c1bf088703dd1e03 ]

Sending frames via the hsr (master) device requires a sequence number
which is tracked in hsr_priv::sequence_nr and protected by
hsr_priv::seqnr_lock. Each time a new frame is sent, it will obtain a
new id and then send it via the slave devices.
Each time a packet is sent (via hsr_forward_do()) the sequence number is
checked via hsr_register_frame_out() to ensure that a frame is not
handled twice. This make sense for the receiving side to ensure that the
frame is not injected into the stack twice after it has been received
from both slave ports.

There is no locking to cover the sending path which means the following
scenario is possible:

  CPU0 CPU1
  hsr_dev_xmit(skb1) hsr_dev_xmit(skb2)
   fill_frame_info()             fill_frame_info()
    hsr_fill_frame_info()         hsr_fill_frame_info()
     handle_std_frame()            handle_std_frame()
      skb1's sequence_nr = 1
                                    skb2's sequence_nr = 2
   hsr_forward_do()              hsr_forward_do()

                                   hsr_register_frame_out(, 2)  // okay, send)

    hsr_register_frame_out(, 1) // stop, lower seq duplicate

Both skbs (or their struct hsr_frame_info) received an unique id.
However since skb2 was sent before skb1, the higher sequence number was
recorded in hsr_register_frame_out() and the late arriving skb1 was
dropped and never sent.

This scenario has been observed in a three node HSR setup, with node1 +
node2 having ping and iperf running in parallel. From time to time ping
reported a missing packet. Based on tracing that missing ping packet did
not leave the system.

It might be possible (didn't check) to drop the sequence number check on
the sending side. But if the higher sequence number leaves on wire
before the lower does and the destination receives them in that order
and it will drop the packet with the lower sequence number and never
inject into the stack.
Therefore it seems the only way is to lock the whole path from obtaining
the sequence number and sending via dev_queue_xmit() and assuming the
packets leave on wire in the same order (and don't get reordered by the
NIC).

Cover the whole path for the master interface from obtaining the ID
until after it has been forwarded via hsr_forward_skb() to ensure the
skbs are sent to the NIC in the order of the assigned sequence numbers.

Fixes: f421436a591d3 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hsr: Disable netpoll.

[ Upstream commit d5c7652eb16fa203d82546e0285136d7b321ffa9 ]

The hsr device is a software device. Its
net_device_ops::ndo_start_xmit() routine will process the packet and
then pass the resulting skb to dev_queue_xmit().
During processing, hsr acquires a lock with spin_lock_bh()
(hsr_add_node()) which needs to be promoted to the _irq() suffix in
order to avoid a potential deadlock.
Then there are the warnings in dev_queue_xmit() (due to
local_bh_disable() with disabled interrupts) left.

Instead trying to address those (there is qdisc and…) for netpoll sake,
just disable netpoll on hsr.

Disable netpoll on hsr and replace the _irqsave() locking with _bh().

Fixes: f421436a591d3 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hsr: Avoid double remove of a node.

[ Upstream commit 0c74d9f79ec4299365bbe803baa736ae0068179e ]

Due to the hashed-MAC optimisation one problem become visible:
hsr_handle_sup_frame() walks over the list of available nodes and merges
two node entries into one if based on the information in the supervision
both MAC addresses belong to one node. The list-walk happens on a RCU
protected list and delete operation happens under a lock.

If the supervision arrives on both slave interfaces at the same time
then this delete operation can occur simultaneously on two CPUs. The
result is the first-CPU deletes the from the list and the second CPUs
BUGs while attempting to dereference a poisoned list-entry. This happens
more likely with the optimisation because a new node for the mac_B entry
is created once a packet has been received and removed (merged) once the
supervision frame has been received.

Avoid removing/ cleaning up a hsr_node twice by adding a `removed' field
which is set to true after the removal and checked before the removal.

Fixes: f266a683a4804 ("net/hsr: Better frame dispatch")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hsr: Add a rcu-read lock to hsr_forward_skb().

[ Upstream commit 5aa2820177af650293b2f9f1873c1f6f8e4ad7a4 ]

hsr_forward_skb() a skb and keeps information in an on-stack
hsr_frame_info. hsr_get_node() assigns hsr_frame_info::node_src which is
from a RCU list. This pointer is used later in hsr_forward_do().
I don't see a reason why this pointer can't vanish midway since there is
no guarantee that hsr_forward_skb() is invoked from an RCU read section.

Use rcu_read_lock() to protect hsr_frame_info::node_src from its
assignment until it is no longer used.

Fixes: f266a683a4804 ("net/hsr: Better frame dispatch")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: clk-krait: fix wrong div2 functions

[ Upstream commit d676d3a3717cf726d3affedbe5ba98fc4ccad7b3 ]

Currently div2 value is applied to the wrong bits. This is caused by a
bug in the code where the shift is done only for lpl, for anything
else the mask is not shifted to the correct bits.

Fix this by correctly shift if lpl is not supported.

Fixes: 4d7dc77babfe ("clk: qcom: Add support for Krait clocks")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108215625.30186-1-ansuelsmth@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: lpass-sc7180: Fix pm_runtime usage

[ Upstream commit ff1ccf59eaffd192efe21f7de9fb0c130faf1b1b ]

The sc7180 lpass clock controller's pm_runtime usage wasn't broken
quite as spectacularly as the sc7280's pm_runtime usage, but it was
still broken. Putting some printouts in at boot showed me this (with
serial console enabled, which makes the prints slow and thus changes
timing):
  [    3.109951] DOUG: my_pm_clk_resume, usage=1
  [    3.114767] DOUG: my_pm_clk_resume, usage=1
  [    3.664443] DOUG: my_pm_clk_suspend, usage=0
  [    3.897566] DOUG: my_pm_clk_suspend, usage=0
  [    3.910137] DOUG: my_pm_clk_resume, usage=1
  [    3.923217] DOUG: my_pm_clk_resume, usage=0
  [    4.440116] DOUG: my_pm_clk_suspend, usage=-1
  [    4.444982] DOUG: my_pm_clk_suspend, usage=0
  [   14.170501] DOUG: my_pm_clk_resume, usage=1
  [   14.176245] DOUG: my_pm_clk_resume, usage=0

...or this w/out serial console:
  [    0.556139] DOUG: my_pm_clk_resume, usage=1
  [    0.556279] DOUG: my_pm_clk_resume, usage=1
  [    1.058422] DOUG: my_pm_clk_suspend, usage=-1
  [    1.058464] DOUG: my_pm_clk_suspend, usage=0
  [    1.186250] DOUG: my_pm_clk_resume, usage=1
  [    1.186292] DOUG: my_pm_clk_resume, usage=0
  [    1.731536] DOUG: my_pm_clk_suspend, usage=-1
  [    1.731557] DOUG: my_pm_clk_suspend, usage=0
  [   10.288910] DOUG: my_pm_clk_resume, usage=1
  [   10.289496] DOUG: my_pm_clk_resume, usage=0

It seems to be doing roughly the right sequence of calls, but just
like with sc7280 this is more by luck than anything. Having a usage of
-1 is just not OK.

Let's fix this like we did with sc7280.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Fixes: ce8c195e652f ("clk: qcom: lpasscc: Introduce pm autosuspend for SC7180")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104064055.2.I49b25b9bda9430fc7ea21e5a708ca5a0aced2798@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: fix module refcount leak in set_supply()

[ Upstream commit da46ee19cbd8344d6860816b4827a7ce95764867 ]

If create_regulator() fails in set_supply(), the module refcount
needs be put to keep refcount balanced.

Fixes: e2c09ae7a74d ("regulator: core: Increase refcount for regulator supply's module")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221201122706.4055992-2-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: fix coverity overrun-call in mt76_get_txpower()

[ Upstream commit 03dd0d49de7db680a856fa566963bb8421f46368 ]

Make sure the nss is valid for nss_delta array. Return zero
if the index is invalid.

Coverity message:
Event overrun-call: Overrunning callee's array of size 4 by passing
argument "n_chains" (which evaluates to 15) in call to
"mt76_tx_power_nss_delta".
int delta = mt76_tx_power_nss_delta(n_chains);

Fixes: 07cda406308b ("mt76: fix rounding issues on converting per-chain and combined txpower")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7921: fix reporting of TX AGGR histogram

[ Upstream commit 028b4f22b37b88821fd87b56ce47b180583c774e ]

Similar to mt7915, fix stats clash between bins [4-7] in 802.11 tx
aggregation histogram.

Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: stop the radar detector after leaving dfs channel

[ Upstream commit 4e58ef4b6d727abdb071f7799aef763f8d6f2ad8 ]

The radar detctor is used for dfs channel. So it will start after switching
to dfs channel and will stop after leaving. The TX will be blocked if radar
detctor isn't stopped in non-dfs channel.

This patch resets the dfs state to indicate the radar detector needs to be
stopped.

Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails

[ Upstream commit 833a9fd28c9b7ccb39a334721379e992dc1c0c89 ]

In regulatory_init_db(), when it's going to return a error, reg_pdev
should be unregistered. When load_builtin_regdb_keys() fails it doesn't
do it and makes cfg80211 can't be reload with report:

sysfs: cannot create duplicate filename '/devices/platform/regulatory.0'
 ...
 <TASK>
 dump_stack_lvl+0x79/0x9b
 sysfs_warn_dup.cold+0x1c/0x29
 sysfs_create_dir_ns+0x22d/0x290
 kobject_add_internal+0x247/0x800
 kobject_add+0x135/0x1b0
 device_add+0x389/0x1be0
 platform_device_add+0x28f/0x790
 platform_device_register_full+0x376/0x4b0
 regulatory_init+0x9a/0x4b2 [cfg80211]
 cfg80211_init+0x84/0x113 [cfg80211]
 ...

Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221109090237.214127-1-chenzhongjin@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: fix memory leak in ieee80211_if_add()

[ Upstream commit 13e5afd3d773c6fc6ca2b89027befaaaa1ea7293 ]

When register_netdevice() failed in ieee80211_if_add(), ndev->tstats
isn't released. Fix it.

Fixes: 5a490510ba5f ("mac80211: use per-CPU TX/RX statistics")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221117064500.319983-1-shaozhengchao@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE

[ Upstream commit 7dbfa445ff7393d1c4c066c1727c9e0af1251958 ]

Commit f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs")
has changed the user-space interface so that bogus SPI_CS_HIGH started
to appear in the mask returned by SPI_IOC_RD_MODE even for active-low CS
pins. Commit 138c9c32f090
("spi: spidev: Fix CS polarity if GPIO descriptors are used") fixed only
SPI_IOC_WR_MODE part of the problem. Let's fix SPI_IOC_RD_MODE
symmetrically.

Test case:

#include <sys/ioctl.h>
#include <fcntl.h>
#include <linux/spi/spidev.h>

int main(int argc, char **argv)
{
char modew = SPI_CPHA;
char moder;
int f = open("/dev/spidev0.0", O_RDWR);

if (f < 0)
return 1;

ioctl(f, SPI_IOC_WR_MODE, &modew);
ioctl(f, SPI_IOC_RD_MODE, &moder);

return moder == modew ? 0 : 2;
}

Fixes: f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20221130162927.539512-1-alexander.sverdlin@siemens.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: uninitialized variable in bond_miimon_inspect()

[ Upstream commit e5214f363dabca240446272dac54d404501ad5e5 ]

The "ignore_updelay" variable needs to be initialized to false.

Fixes: f8a65ab2f3ff ("bonding: fix link recovery in mode 2 when updelay is nonzero")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/Y4SWJlh3ohJ6EPTL@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect

[ Upstream commit 9072931f020bfd907d6d89ee21ff1481cd78b407 ]

Use apply_bytes on ingress redirect, when apply_bytes is less than
the length of msg data, some data may be skipped and lost in
bpf_tcp_ingress().

If there is still data in the scatterlist that has not been consumed,
we cannot move the msg iter.

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-4-git-send-email-yangpc@wangsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Fix missing BPF_F_INGRESS flag when using apply_bytes

[ Upstream commit a351d6087bf7d3d8440d58d3bf244ec64b89394a ]

When redirecting, we use sk_msg_to_ingress() to get the BPF_F_INGRESS
flag from the msg->flags. If apply_bytes is used and it is larger than
the current data being processed, sk_psock_msg_verdict() will not be
called when sendmsg() is called again. At this time, the msg->flags is 0,
and we lost the BPF_F_INGRESS flag.

So we need to save the BPF_F_INGRESS flag in sk_psock and use it when
redirection.

Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-3-git-send-email-yangpc@wangsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data

[ Upstream commit 7a9841ca025275b5b0edfb0b618934abb6ceec15 ]

In tcp_bpf_send_verdict() redirection, the eval variable is assigned to
__SK_REDIRECT after the apply_bytes data is sent, if msg has more_data,
sock_put() will be called multiple times.

We should reset the eval variable to __SK_NONE every time more_data
starts.

This causes:

IPv4: Attempt to release TCP socket in state 1 00000000b4c925d7
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0x110
Modules linked in:
CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded Not tainted 6.0.0 #1
Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
 <TASK>
 __tcp_transmit_skb+0xa1b/0xb90
 ? __alloc_skb+0x8c/0x1a0
 ? __kmalloc_node_track_caller+0x184/0x320
 tcp_write_xmit+0x22a/0x1110
 __tcp_push_pending_frames+0x32/0xf0
 do_tcp_sendpages+0x62d/0x640
 tcp_bpf_push+0xae/0x2c0
 tcp_bpf_sendmsg_redir+0x260/0x410
 ? preempt_count_add+0x70/0xa0
 tcp_bpf_send_verdict+0x386/0x4b0
 tcp_bpf_sendmsg+0x21b/0x3b0
 sock_sendmsg+0x58/0x70
 __sys_sendto+0xfa/0x170
 ? xfd_validate_state+0x1d/0x80
 ? switch_fpu_return+0x59/0xe0
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0x37/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: cd9733f5d75c ("tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-2-git-send-email-yangpc@wangsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: wistron_btns - disable on UML

[ Upstream commit b2b80d9dd14cb5b70dc254bddbc4eea932694791 ]

The wistron_btns driver calls rtc_cmos_read(), which isn't
available with UML builds, so disable this driver on UML.

Prevents this build error:

ld: drivers/input/misc/wistron_btns.o: in function `poll_bios':
wistron_btns.c:(.text+0x4be): undefined reference to `rtc_cmos_read'

Fixes: 0bbadafdc49d ("um: allow disabling NO_IOMEM") # v5.14+
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221130161604.1879-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: set icmpv6 redirects as RELATED

[ Upstream commit 7d7cfb48d81353e826493d24c7cec7360950968f ]

icmp conntrack will set icmp redirects as RELATED, but icmpv6 will not
do this.

For icmpv6, only icmp errors (code <= 128) are examined for RELATED state.
ICMPV6 Redirects are part of neighbour discovery mechanism, those are
handled by marking a selected subset (e.g.  neighbour solicitations) as
UNTRACKED, but not REDIRECT -- they will thus be flagged as INVALID.

Add minimal support for REDIRECTs.  No parsing of neighbour options is
added for simplicity, so this will only check that we have the embeeded
original header (ND_OPT_REDIRECT_HDR), and then attempt to do a flow
lookup for this tuple.

Also extend the existing test case to cover redirects.

Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Eric Garver <eric@garver.life>
Link: https://github.com/firewalld/firewalld/issues/1046
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe

[ Upstream commit 97b801be6f8e53676b9f2b105f54e35c745c1b22 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by going to
err_pm instead of err_clk.

Fixes:f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL")

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160402.126140-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix memory leakage

[ Upstream commit 75818afff631e1ea785a82c3e8bb82eb0dee539c ]

This patch fixes potential memory leakage and seg fault
in  _gpuvm_import_dmabuf() function

Fixes: d4ec4bdc0bd5 ("drm/amdkfd: Allow access for mmapping KFD BOs")
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()

[ Upstream commit ca54639c7752edf1304d92ff4d0c049d4efc9ba0 ]

As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.

If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()

[ Upstream commit 725a521a18734f65de05b8d353b5bd0d3ca4c37a ]

As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.

If we break the loop in radeon_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.

Fixes: d8ade3526b2a ("drm/radeon: handle non-VGA class pci devices with ATRM")
Fixes: c61e2775873f ("drm/radeon: split ATRM support out from the ATPX handler (v3)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm/smu11: BACO is supported when it's in BACO state

[ Upstream commit 6dca7efe6e522bf213c7dab691fa580d82f48f74 ]

Return true early if ASIC is in BACO state already, no need
to talk to SMU. It can fix the issue that driver was not
calling BACO exit at all in runtime pm resume, and a timing
issue leading to a PCI AER error happened eventually.

Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8173: Enable IRQ when pdata is ready

[ Upstream commit 4cbb264d4e9136acab2c8fd39e39ab1b1402b84b ]

If the device does not come straight from reset, we might receive an IRQ
before we are ready to handle it.

Fixes:

[    2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4
[    2.522601] Call trace:
[    2.525040]  regmap_read+0x1c/0x80
[    2.528434]  mt8173_afe_irq_handler+0x40/0xf0
...
[    2.598921]  start_kernel+0x338/0x42c

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Fixes: ee0bcaff109f ("ASoC: mediatek: Add AFE platform driver")
Link: https://lore.kernel.org/r/20221128-mt8173-afe-v1-0-70728221628f@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8173: Fix debugfs registration for components

[ Upstream commit 8c32984bc7da29828260ac514d5d4967f7e8f62d ]

When registering the mt8173-afe-pcm driver, we are also adding two
components: one is for the PCM DAIs and one is for the HDMI DAIs, but
when debugfs is enabled, we're getting the following issue:

[   17.279176] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
[   17.288345] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!

To overcome to that without any potentially big rewrite of this driver,
similarly to what was done in mt8195-afe-pcm, add a debugfs_prefix to
the components before actually adding them.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211111161108.502344-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 4cbb264d4e91 ("ASoC: mediatek: mt8173: Enable IRQ when pdata is ready")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix double free on tx path.

[ Upstream commit 0473cbae2137b963bd0eaa74336131cb1d3bc6c3 ]

We see kernel crashes and lockups and KASAN errors related to ax210
firmware crashes.  One of the KASAN dumps pointed at the tx path,
and it appears there is indeed a way to double-free an skb.

If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the
method will be freed.  But, in case where we build TSO skb buffer,
the skb may also be freed in error case.  So, return 0 in that particular
error case and do cleanup manually.

BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000000 | tsf hi
Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650

CPU: 4 PID: 9650 Comm: btserver Tainted: G        W         5.19.8+ #5
iwlwifi 0000:06:00.0: 0x00000000 | time gp1
Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019
Call Trace:
 <TASK>
 dump_stack_lvl+0x55/0x6d
 print_report.cold.12+0xf2/0x684
iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2
 ? __list_del_entry_valid+0x12/0x90
 kasan_report+0x8b/0x180
iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type
 ? __list_del_entry_valid+0x12/0x90
 __list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000048 | uCode version major
 tcp_update_skb_after_send+0x5d/0x170
 __tcp_transmit_skb+0xb61/0x15c0
iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor
 ? __tcp_select_window+0x490/0x490
iwlwifi 0000:06:00.0: 0x00000420 | hw version
 ? trace_kmalloc_node+0x29/0xd0
 ? __kmalloc_node_track_caller+0x12a/0x260
 ? memset+0x1f/0x40
 ? __build_skb_around+0x125/0x150
 ? __alloc_skb+0x1d4/0x220
 ? skb_zerocopy_clone+0x55/0x230
iwlwifi 0000:06:00.0: 0x00489002 | board version
 ? kmalloc_reserve+0x80/0x80
 ? rcu_read_lock_bh_held+0x60/0xb0
 tcp_write_xmit+0x3f1/0x24d0
iwlwifi 0000:06:00.0: 0x034E001C | hcmd
 ? __check_object_size+0x180/0x350
iwlwifi 0000:06:00.0: 0x24020000 | isr0
 tcp_sendmsg_locked+0x8a9/0x1520
iwlwifi 0000:06:00.0: 0x01400000 | isr1
 ? tcp_sendpage+0x50/0x50
iwlwifi 0000:06:00.0: 0x48F0000A | isr2
 ? lock_release+0xb9/0x400
 ? tcp_sendmsg+0x14/0x40
iwlwifi 0000:06:00.0: 0x00C3080C | isr3
 ? lock_downgrade+0x390/0x390
 ? do_raw_spin_lock+0x114/0x1d0
iwlwifi 0000:06:00.0: 0x00200000 | isr4
 ? rwlock_bug.part.2+0x50/0x50
iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id
 ? rwlock_bug.part.2+0x50/0x50
 ? lockdep_hardirqs_on_prepare+0xe/0x200
iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event
 ? __local_bh_enable_ip+0x87/0xe0
 ? inet_send_prepare+0x220/0x220
iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control
 tcp_sendmsg+0x22/0x40
 sock_sendmsg+0x5f/0x70
iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration
 __sys_sendto+0x19d/0x250
iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid
 ? __ia32_sys_getpeername+0x40/0x40
iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match
 ? rcu_read_lock_held_common+0x12/0x50
 ? rcu_read_lock_sched_held+0x5a/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? rcu_read_lock_sched_held+0x5a/0xd0
 ? rcu_read_lock_sched_held+0x5a/0xd0
 ? lock_release+0xb9/0x400
 ? lock_downgrade+0x390/0x390
 ? ktime_get+0x64/0x130
 ? ktime_get+0x8d/0x130
 ? rcu_read_lock_held_common+0x12/0x50
 ? rcu_read_lock_sched_held+0x5a/0xd0
 ? rcu_read_lock_held_common+0x12/0x50
 ? rcu_read_lock_sched_held+0x5a/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 __x64_sys_sendto+0x6f/0x80
 do_syscall_64+0x34/0xb0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f1d126e4531
Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89
RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531
RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014
RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000010
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
 </TASK>

Allocated by task 9650:
 kasan_save_stack+0x1c/0x40
 __kasan_slab_alloc+0x6d/0x90
 kmem_cache_alloc_node+0xf3/0x2b0
 __alloc_skb+0x191/0x220
 tcp_stream_alloc_skb+0x3f/0x330
 tcp_sendmsg_locked+0x67c/0x1520
 tcp_sendmsg+0x22/0x40
 sock_sendmsg+0x5f/0x70
 __sys_sendto+0x19d/0x250
 __x64_sys_sendto+0x6f/0x80
 do_syscall_64+0x34/0xb0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 9650:
 kasan_save_stack+0x1c/0x40
 kasan_set_track+0x21/0x30
 kasan_set_free_info+0x20/0x30
 __kasan_slab_free+0x102/0x170
 kmem_cache_free+0xc8/0x3e0
 iwl_mvm_mac_itxq_xmit+0x124/0x270 [iwlmvm]
 ieee80211_queue_skb+0x874/0xd10 [mac80211]
 ieee80211_xmit_fast+0xf80/0x1180 [mac80211]
 __ieee80211_subif_start_xmit+0x287/0x680 [mac80211]
 ieee80211_subif_start_xmit+0xcd/0x730 [mac80211]
 dev_hard_start_xmit+0xf6/0x420
 __dev_queue_xmit+0x165b/0x1b50
 ip_finish_output2+0x66e/0xfb0
 __ip_finish_output+0x487/0x6d0
 ip_output+0x11c/0x350
 __ip_queue_xmit+0x36b/0x9d0
 __tcp_transmit_skb+0xb35/0x15c0
 tcp_write_xmit+0x3f1/0x24d0
 tcp_sendmsg_locked+0x8a9/0x1520
 tcp_sendmsg+0x22/0x40
 sock_sendmsg+0x5f/0x70
 __sys_sendto+0x19d/0x250
 __x64_sys_sendto+0x6f/0x80
 do_syscall_64+0x34/0xb0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

The buggy address belongs to the object at ffff88813cfa4b40
 which belongs to the cache skbuff_fclone_cache of size 472
The buggy address is located 96 bytes inside of
 472-byte region [ffff88813cfa4b40, ffff88813cfa4d18)

The buggy address belongs to the physical page:
page:ffffea0004f3e900 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813cfa6c40 pfn:0x13cfa4
head:ffffea0004f3e900 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x5fff8000010200(slab|head|node=0|zone=2|lastcpupid=0x3fff)
raw: 005fff8000010200 ffffea0004656b08 ffffea0008e8cf08 ffff8881081a5240
raw: ffff88813cfa6c40 0000000000170015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88813cfa4a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88813cfa4b00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff88813cfa4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                               ^
 ffff88813cfa4c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88813cfa4c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 08f7d8b69aaf ("iwlwifi: mvm: bring back mvm GSO code")
Link: https://lore.kernel.org/linux-wireless/20220928193057.16132-1-greearb@candelatech.com/
Tested-by: Amol Jawale <amol.jawale@candelatech.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20221123225313.21b1ee31d666.I3b3ba184433dd2a544d91eeeda29b467021824ae@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: asihpi: fix missing pci_disable_device()

[ Upstream commit 9d86515c3d4c0564a0c31a2df87d735353a1971e ]

pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release().

Fixes: 3285ea10e9b0 ("ALSA: asihpi - Interrelated HPI tidy up.")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221126021429.3029562-1-liushixin2@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Fix an Oops in nfs_d_automount()

[ Upstream commit 35e3b6ae84935d0d7ff76cbdaa83411b0ad5e471 ]

When mounting from a NFSv4 referral, path->dentry can end up being a
negative dentry, so derive the struct nfs_server from the dentry
itself instead.

Fixes: 2b0143b5c986 ("VFS: normal filesystems (and lustre): d_inode() annotations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn

[ Upstream commit 51069e4aef6257b0454057359faed0ab0c9af083 ]

If we're asked to recover open state while a delegation return is
outstanding, then the state manager thread cannot use a cached open, so
if the server returns a delegation, we can end up deadlocked behind the
pending delegreturn.
To avoid this problem, let's just ask the server not to give us a
delegation unless we're explicitly reclaiming one.

Fixes: be36e185bd26 ("NFSv4: nfs4_open_recover_helper() must set share access")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Fix a credential leak in _nfs4_discover_trunking()

[ Upstream commit e83458fce080dc23c25353a1af90bfecf79c7369 ]

Fixes: 4f40a5b55446 ("NFSv4: Add an fattr allocation to _nfs4_discover_trunking()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Fix initialisation of struct nfs4_label

[ Upstream commit c528f70f504434eaff993a5ddd52203a2010d51f ]

The call to nfs4_label_init_security() should return a fully initialised
label.

Fixes: aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Fix a memory stomp in decode_attr_security_label

[ Upstream commit 43c1031f7110967c240cb6e922adcfc4b8899183 ]

We must not change the value of label->len if it is zero, since that
indicates we stored a label.

Fixes: b4487b935452 ("nfs: Fix getxattr kernel panic and memory overflow")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding

[ Upstream commit eef7314caf2d73a94b68ba293cd105154d3a664e ]

We need to clear the FATTR4_WORD2_SECURITY_LABEL bitmap flag
irrespective of whether or not the label is too long.

Fixes: aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd

[ Upstream commit d067b3378a78c9c3048ac535e31c171b6f5b5846 ]

As the mtk_btcvsd_snd_write and mtk_btcvsd_snd_read may return error,
it should be better to catch the exception.

Fixes: 4bd8597dc36c ("ASoC: mediatek: add btcvsd driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221116030750.40500-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dt-bindings: wcd9335: fix reset line polarity in example

[ Upstream commit 34cb111f8a7b98b5fec809dd194003bca20ef1b2 ]

When resetting the block, the reset line is being driven low and then
high, which means that the line in DTS should be annotated as "active
low".

Fixes: 1877c9fda1b7 ("ASoC: dt-bindings: add dt bindings for wcd9335 audio codec")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-2-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()

[ Upstream commit 7ad4384d53c67672a8720cdc2ef638d7d1710ab8 ]

Add the missing clk_disable_unprepare() before return from
tegra_dc_probe() in the error handling path.

Fixes: f68ba6912bd2 ("drm/tegra: dc: Link DC1 to DC0 on Tegra20")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC

[ Upstream commit f50ebe10f5d8092c37e2bd430c78e03bf38b1e20 ]

Commit 5441e9dafdfc6dc40 ("[media] s5p-mfc: Core support for MFC v7")
which adds mfc v7 support for Exynos3250 and use the same compatible
string as used by Exynos5240 but both the IPs are a bit different in
terms of IP clock.
Add variant driver data based on the new compatible string
"samsung,exynos3250-mfc" for Exynos3250 SoC.

Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: 5441e9dafdfc ("[media] s5p-mfc: Core support for MFC v7")
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()

[ Upstream commit 0ed554fd769a19ea8464bb83e9ac201002ef74ad ]

Wei Chen reports a kernel bug as blew:

general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
...
Call Trace:
<TASK>
__i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109
i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170
i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297
i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd834a8bded

In az6027_i2c_xfer(), if msg[i].addr is 0x99,
a null-ptr-deref will caused when accessing msg[i].buf.
For msg[i].len is 0 and msg[i].buf is null.

Fix this by checking msg[i].len in az6027_i2c_xfer().

Link: https://lore.kernel.org/lkml/CAO4mrfcPHB5aQJO=mpqV+p8mPLNg-Fok0gw8gZ=zemAfMGTzMg@mail.gmail.com/
Link: https://lore.kernel.org/linux-media/20221120065918.2160782-1-zhongbaisong@huawei.com
Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-core: Fix ignored return value in dvb_register_frontend()

[ Upstream commit a574359e2e71ce16be212df3a082ed60a4bd2c5f ]

In dvb_register_frontend(), dvb_register_device() is possible to fail
but its return value is ignored.

It will cause use-after-free when module is removed, because in
dvb_unregister_frontend() it tries to unregister a not registered
device.

BUG: KASAN: use-after-free in dvb_remove_device+0x18b/0x1f0 [dvb_core]
Read of size 4 at addr ffff88800dff4824 by task rmmod/428
CPU: 3 PID: 428 Comm: rmmod
Call Trace:
 <TASK>
 ...
 dvb_remove_device+0x18b/0x1f0 [dvb_core]
 dvb_unregister_frontend+0x7b/0x130 [dvb_core]
 vidtv_bridge_remove+0x6e/0x160 [dvb_vidtv_bridge]
 ...

Fix this by catching return value of dvb_register_device().
However the fe->refcount can't be put to zero immediately, because
there are still modules calling dvb_frontend_detach() when
dvb_register_frontend() fails.

Link: https://lore.kernel.org/linux-media/20221108033005.169095-1-chenzhongjin@huawei.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: pinconf-generic: add missing of_node_put()

[ Upstream commit 5ead93289815a075d43c415e35c8beafafb801c9 ]

of_node_put() needs to be called when jumping out of the loop, since
for_each_available_child_of_node() will increase the refcount of node.

Fixes: c7289500e29d ("pinctrl: pinconf-generic: scan also referenced phandle node")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Link: https://lore.kernel.org/r/20221125070156.3535855-1-zhangpeng362@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx8mn: fix imx8mn_enet_phy_sels clocks list

[ Upstream commit 2626cf67f20b28446dfc3a5b9493dd535cdb747b ]

According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):

     Clock Root         offset     Source Select (CCM_TARGET_ROOTn[MUX])
        ...              ...                    ...
 ENET_PHY_REF_CLK_ROOT  0xAA80            000 - 24M_REF_CLK
                                          001 - SYSTEM_PLL2_DIV20
                                          010 - SYSTEM_PLL2_DIV8
                                          011 - SYSTEM_PLL2_DIV5
                                          100 - SYSTEM_PLL2_DIV2
                                          101 - AUDIO_PLL1_CLK
                                          110 - VIDEO_PLL_CLK
                                          111 - AUDIO_PLL2_CLK
        ...              ...                    ...

while the imx8mn_enet_phy_sels list didn't contained audio_pll1_out for
source select bits 101b.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx8mn: fix imx8mn_sai2_sels clocks list

[ Upstream commit 34d996747a74e3a86990f9f9c48de09159d78edb ]

According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):

     Clock Root     offset     Source Select (CCM_TARGET_ROOTn[MUX])
        ...          ...                    ...
   SAI2_CLK_ROOT    0xA600            000 - 24M_REF_CLK
                                      001 - AUDIO_PLL1_CLK
                                      010 - AUDIO_PLL2_CLK
                                      011 - VIDEO_PLL_CLK
                                      100 - SYSTEM_PLL1_DIV6
                                      110 - EXT_CLK_2
                                      111 - EXT_CLK_3
        ...          ...                    ...

while the imx8mn_sai2_sels list contained clk_ext3 and clk_ext4 for
source select bits 110b and 111b.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: replace osc_hdmi with dummy

[ Upstream commit e7fa365ff66f16772dc06b480cd78f858d10856b ]

There is no occurrence of the hdmi oscillator in the reference manual
(document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes
76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is
no entry for the source select bits 101b, which is the setting referenced
by "osc_hdmi".
Fix by renaming "osc_hdmi" with "dummy", a clock which has already been
used for missing source select bits.

Tested on the BSH SystemMaster (SMM) S2 board.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx8mn: rename vpu_pll to m7_alt_pll

[ Upstream commit a429c60baefd95ab43a2ce7f25d5b2d7a2e431df ]

The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.

As an example for all, if we consider the second row of the "Clock Root"
table of chapter 5 (Clocks and Power Management) of the RM:

     Clock Root     offset     Source Select (CCM_TARGET_ROOTn[MUX])
        ...          ...                    ...
  ARM_M7_CLK_ROOT   0x8080            000 - 24M_REF_CLK
                                      001 - SYSTEM_PLL2_DIV5
      010 - SYSTEM_PLL2_DIV4
      011 - M7_ALT_PLL_CLK
      100 - SYSTEM_PLL1_CLK
      101 - AUDIO_PLL1_CLK
      110 - VIDEO_PLL_CLK
      111 - SYSTEM_PLL3_CLK
        ...          ...                    ...

but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll
for the source select bits 011b.

So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM.

The IMX8MN_VPU_* constants have not been removed to ensure backward
compatibility of the patch.

No functional changes intended.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imon: fix a race condition in send_packet()

[ Upstream commit 813ceef062b53d68f296aa3cb944b21a091fabdb ]

The function send_packet() has a race condition as follows:

func send_packet()
{
    // do work
    call usb_submit_urb()
    mutex_unlock()
    wait_for_event_interruptible()  <-- lock gone
    mutex_lock()
}

func vfd_write()
{
    mutex_lock()
    call send_packet()  <- prev call is not completed
    mutex_unlock()
}

When the mutex is unlocked and the function send_packet() waits for the
call to complete, vfd_write() can start another call, which leads to the
"URB submitted while active" warning in usb_submit_urb().
Fix this by removing the mutex_unlock() call in send_packet() and using
mutex_lock_interruptible().

Link: https://syzkaller.appspot.com/bug?id=e378e6a51fbe6c5cc43e34f131cc9a315ef0337e
Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver")
Reported-by: syzbot+0c3cb6dc05fbbdc3ad66@syzkaller.appspotmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vimc: Fix wrong function called when vimc_init() fails

[ Upstream commit f74d3f326d1d5b8951ce263c59a121ecfa65e7c0 ]

In vimc_init(), when platform_driver_register(&vimc_pdrv) fails,
platform_driver_unregister(&vimc_pdrv) is wrongly called rather than
platform_device_unregister(&vimc_pdev), which causes kernel warning:

 Unexpected driver unregister!
 WARNING: CPU: 1 PID: 14517 at drivers/base/driver.c:270 driver_unregister+0x8f/0xb0
 RIP: 0010:driver_unregister+0x8f/0xb0
 Call Trace:
  <TASK>
  vimc_init+0x7d/0x1000 [vimc]
  do_one_initcall+0xd0/0x4e0
  do_init_module+0x1cf/0x6b0
  load_module+0x65c2/0x7820

Fixes: 4a29b7090749 ("[media] vimc: Subdevices as modules")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: Add checks for devm_kcalloc

[ Upstream commit 1bf5ee979076ceb121ee51c95197d890b1cee7f4 ]

As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.

Fixes: 24caf8d9eb10 ("ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221124140510.63468-1-yuancan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: destroy workqueue when drbd device was freed

[ Upstream commit 8692814b77ca4228a99da8a005de0acf40af6132 ]

A submitter workqueue is dynamically allocated by init_submitter()
called by drbd_create_device(), we should destroy it when this
device is not needed or destroyed.

Fixes: 113fef9e20e0 ("drbd: prepare to queue write requests on a submit worker")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-3-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: remove call to memset before free device/resource/connection

[ Upstream commit 6e7b854e4c1b02dba00760dfa79d8dbf6cce561e ]

This revert c2258ffc56f2 ("drbd: poison free'd device, resource and
connection structs"), add memset is odd here for debugging, there are
some methods to accurately show what happened, such as kdump.

Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-2-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 8692814b77ca ("drbd: destroy workqueue when drbd device was freed")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: maps: pxa2xx-flash: fix memory leak in probe

[ Upstream commit 2399401feee27c639addc5b7e6ba519d3ca341bf ]

Free 'info' upon remapping error to avoid a memory leak.

Fixes: e644f7d62894 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
[<miquel.raynal@bootlin.com>: Reword the commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221119073307.22929-1-zhengyongjun3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: fix link recovery in mode 2 when updelay is nonzero

[ Upstream commit f8a65ab2f3ff7410921ebbf0dc55453102c33c56 ]

Before this change when a bond in mode 2 lost link, all of its slaves
lost link, the bonding device would never recover even after the
expiration of updelay. This change removes the updelay when the bond
currently has no usable links. Conforming to bonding.txt section 13.1
paragraph 4.

Fixes: 41f891004063 ("bonding: ignore updelay param when there is no active slave")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix pci device refcount leak

[ Upstream commit b85e285e3d6352b02947fc1b72303673dfacb0aa ]

As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().

So before returning from amdgpu_device_resume|suspend_display_audio(),
pci_dev_put() is called to avoid refcount leak.

Fixes: 3f12acc8d6d4 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: Fix memory leak in rockchip_clk_register_pll()

[ Upstream commit 739a6a6bbdb793bd57938cb24aa5a6df89983546 ]

If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.

Fixes: 90c590254051 ("clk: rockchip: add clock type for pll clocks and pll used on rk3066")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123091201.199819-1-xiujianfeng@huawei.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: use kfree_const() to free space conditionally

[ Upstream commit dc8d006d15b623c1d80b90b45d6dcb6e890dad09 ]

Use kfree_const() to free supply_name conditionally in create_regulator()
as supply_name may be allocated from kmalloc() or directly from .rodata
section.

Fixes: 87fe29b61f95 ("regulator: push allocations in create_regulator() outside of lock")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221123034616.3609537-1-bobo.shaobowang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT

[ Upstream commit cf59e1e4c79bf741905484cdb13c130b53576a16 ]

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in sound/core/seq/seq_clientmgr.c:509:22
left shift of 1 by 31 places cannot be represented in type 'int'
...
Call Trace:
 <TASK>
 dump_stack_lvl+0x8d/0xcf
 ubsan_epilogue+0xa/0x44
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x208
 snd_seq_deliver_single_event.constprop.21+0x191/0x2f0
 snd_seq_deliver_event+0x1a2/0x350
 snd_seq_kernel_client_dispatch+0x8b/0xb0
 snd_seq_client_notify_subscription+0x72/0xa0
 snd_seq_ioctl_subscribe_port+0x128/0x160
 snd_seq_kernel_client_ctl+0xce/0xf0
 snd_seq_oss_create_client+0x109/0x15b
 alsa_seq_oss_init+0x11c/0x1aa
 do_one_initcall+0x80/0x440
 kernel_init_freeable+0x370/0x3c3
 kernel_init+0x1b/0x190
 ret_from_fork+0x1f/0x30
 </TASK>

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Link: https://lore.kernel.org/r/20221121111630.3119259-1-zhongbaisong@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT

[ Upstream commit b5172e62458f8e6ff359e5f096044a488db90ac5 ]

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in sound/core/pcm_native.c:2676:21
left shift of 1 by 31 places cannot be represented in type 'int'
...
Call Trace:
 <TASK>
 dump_stack_lvl+0x8d/0xcf
 ubsan_epilogue+0xa/0x44
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x208
 snd_pcm_open_substream+0x9f0/0xa90
 snd_pcm_oss_open.part.26+0x313/0x670
 snd_pcm_oss_open+0x30/0x40
 soundcore_open+0x18b/0x2e0
 chrdev_open+0xe2/0x270
 do_dentry_open+0x2f7/0x620
 path_openat+0xd66/0xe70
 do_filp_open+0xe3/0x170
 do_sys_openat2+0x357/0x4a0
 do_sys_open+0x87/0xd0
 do_syscall_64+0x34/0x80

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Link: https://lore.kernel.org/r/20221121110044.3115686-1-zhongbaisong@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: k210: call of_node_put()

[ Upstream commit a8acc11643082a706de86a19f1f824712d971984 ]

Since for_each_available_child_of_node() will increase the refcount of
node, we need to call of_node_put() manually when breaking out of the
iteration.

Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221122075853.2496680-1-zhangpeng362@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: hid-sensor-custom: set fixed size for custom attributes

[ Upstream commit 9d013910df22de91333a0acc81d1dbb115bd76f6 ]

This is no bugfix (so no Fixes: tag is necessary) as it is
taken care of in hid_sensor_custom_add_attributes().

The motivation for this patch is that:
hid_sensor_custom_field.attr_name and
hid_sensor_custom_field.attrs
has the size of HID_CUSTOM_TOTAL_ATTRS and used in same context.

We compare against HID_CUSTOM_TOTAL_ATTRS when
looping through hid_custom_attrs.

We will silent the smatch error:
hid_sensor_custom_add_attributes() error: buffer overflow
'hid_custom_attrs' 8 <= 10

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Move skb->len == 0 checks into __bpf_redirect

[ Upstream commit 114039b342014680911c35bd6b72624180fd669a ]

To avoid potentially breaking existing users.

Both mac/no-mac cases have to be amended; mac_header >= network_header
is not enough (verified with a new test, see next patch).

Fixes: fd1894224407 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221121180340.1983627-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: Fix the number of bytes for the dummy cycles

[ Upstream commit fdc20370d93e8c6d2f448a539d08c2c064af7694 ]

The number of bytes used by spi_nor_spimem_check_readop() may be
incorrect for the dummy cycles. Since nor->read_dummy is not initialized
before spi_nor_spimem_adjust_hwcaps().

We use both mode and wait state clock cycles instead of nor->read_dummy.

Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol")
Co-developed-by: Bayi Cheng <bayi.cheng@mediatek.com>
Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20221031124633.13189-1-allen-kh.cheng@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: hide jedec_id sysfs attribute if not present

[ Upstream commit 7d388551b6888f3725e6c957f472526b35161a5b ]

Some non-jedec compliant flashes (like the Everspin flashes) don't have
an ID at all. Hide the attribute in this case.

Fixes: 36ac02286265 ("mtd: spi-nor: add initial sysfs support")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20220810220654.1297699-2-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict()

[ Upstream commit d2c135619cb89d1d5693df81ab408c5e8e97e898 ]

inet_csk_bind_conflict() can access sk->sk_bound_dev_if for
unlocked sockets.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>