build: do not link libdrm without DRM backend

The pkg-config test for LIBDRM is independent of whether the DRM backend
is enabled or not. Therefore it is possible to have libdrm available and
found, even though it is not needed.

Do not link libdrm.so into the launchers unless it is really needed,
that is, DRM compositor is built. Otherwise you end up with
fbdev-backend.so and weston-launch depending on libdrm.so.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

configure: replace HAVE_LIBDRM with BUILD_DRM_COMPOSITOR

HAVE_LIBDRM was used as a condition for the launcher infrastructure to
call libdrm.so functions. It was set by an independent test for libdrm,
which would silently continue if libdrm was not found. It was assumed
that if you enabled a feature that used libdrm at runtime, the test for
that feature would imply that HAVE_LIBDRM is also set. This was quite
subtle.

The only feature that actually uses libdrm.so at runtime is the DRM
backend. No other backend needs the libdrm calls in the launcher
infrastructure.

Therefore to simplify things, stop using HAVE_LIBDRM and use
BUILD_DRM_COMPOSITOR instead. If you enable the DRM compositor, you
automatically also get libdrm support in the launchers.

There are still things depending on LIBDRM_CFLAGS and LIBDRM_LIBS, so
the test cannot be removed completely.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

desktop-shell: Position maximized surfaces on the correct output.

During a maximize event, a surface was previously always put back to
the primary output after one frame on the correct output, while keeping
its size.  This was caused by the shell surface’s last_{width,height}
not being reset when it was either fullscreen or maximized, leading to
the unmaximize/maximize dance being done at each commit.

This was introduced in 8f9d90a84bb2888b074fea93c4a28778bc6439c6.

Changes since v1:
- Fix the actual issue instead of a symptom.

Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

wcap: Prevent fd leak in wcap_decoder_create() fail path

Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

compositor-wayland: Properly dealloc mmap data using munmap

Signed-off-by: Raúl Peñacoba <raul.mikaop.zelda@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

editor: Add missing free() and display_destroy() in main

Signed-off-by: Raúl Peñacoba <raul.mikaop.zelda@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

ivi-layout: Add missing free() in ivi_view_create

Signed-off-by: Raúl Peñacoba <raul.mikaop.zelda@gmail.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

gl-renderer: Change 'data' type to 'uint8_t *', since 'void *' arithmetic is undefined

Signed-off-by: Raúl Peñacoba <raul.mikaop.zelda@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

compositor-drm: Add missing drmModeFreeResources in drm_device_is_kms

Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

compositor-wayland: Call weston_compositor_exit when receiving an xdg toplevel close event

Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

desktop-shell: Remove unused variable in panel_create

Signed-off-by: Raúl Peñacoba <raul.mikaop.zelda@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

compositor-wayland: Call set_window_geometry when using zxdg_shell_v6

This way Wayland compositors will be aware of Weston's
"visible bounds" (and ignore its shadows).

Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

weston-terminal: Fix race at startup

If anything is printed for the terminal window to display before the
window has been initially sized we end up with a segfault.

This defers the exec() of the shell child process until after the
window is sized so this can't happen anymore.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

desktop-shell: launch clients in their own process group.

Client applications shouldn't be in the same process group as
the display server.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

weston: Set CLOEXEC on stdin

We don't want to leak this into apps launched from the panel.

stdout and stderr are left for now because some things launched
by weston - such as weston-keyboard - share weston's log by
printing to those fds.

I'm singling out stdin because it's never needed by a child process
and because it's value is 0, which makes it easy to accidentally
do bad things to (commit 5c611d933f60f720db98331c9c1c6ed4420f9782)

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

os: Check for EINTR on ftruncate()

The man page indicates that ftruncate() can set errno to EINTR, so test
for this.

I have not actually been able to provoke an EINTR error from ftruncate()
in testing though.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

os: Check for EINTR on posix_fallocate()

posix_fallocate() can return EINTR and need to be restarted - I've hit
this when running weston-terminal under gdb.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

compositor-wayland: Check the return value of wayland_output_create_common

If wayland_output_create_common returns NULL, it means that
the output creation failed.

Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

compositor-wayland: Refactor struct wayland_output::name usage

struct wayland_output::name was used but never initialized.
Also zxdg_toplevel_v6_set_title was only called for windowed outputs,
and some compositors let you see the client's name even when it is
fullscreen (GNOME Shell's Activities menu for example).

So rename struct wayland_output::name to struct wayland_output::title and
precompute it on wayland_output_create_common(), so it can be later used
on xdg's set_title and frame_create.

v2: Move zxdg_toplevel_v6_set_title() before the wl_surface_commit()
as per Quentin Glidic's suggestion.

Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

Fix uninitialized msec_to_next in output_repaint_timer_arm

Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

man: move pageflip-timeout later

The paragraph about pageflip-timeout was added in between the two
paragraphs of idle-time, causing the paragraphs to be associated wrong.

Move the pageflip-timeout paragraph to the end.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=100163

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>

weston-terminal: Add a --maximized command line parameter

This is useful for testing compositor response to a client that
requests a maximized initial surface.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

weston-launch: Add sysmacros.h include for major()

Same as with c4d7f66c, but I hadn't done a full-tree rebuild so didn't
see this one go by.

Signed-off-by: Daniel Stone <daniels@collabora.com>

libinput: Suppress unhandled-case warning

When the wheel tilt source is present, gcc complains that we don't
handle all possible enumeration values. We already ensure this cannot
happen in its only caller (handle_pointer_axis), but gcc doesn't
recognise this. Give it a default value to quiet the warning.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

simple-dmabuf-v4l: Remove incorrect assert

According to v4l2 documentation, DQBUF always clears FLAG_DONE, so
this assert can be expected to fire 100% of the time.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

configure: bump libweston to 3.0.0

Bump the future release to 3.0.0 due to breaking ABI in libweston.

We have merged a few patches already that change libweston/compositor.h.
While most of the changes arguably change only things libweston users
should not be touching, some change the size of e.g. struct
weston_output and struct weston_compositor, possibly moving member
offsets. We also haven't separated public and private parts from
compositor.h yet. To be on the safe side, bump the major now. I'm sure
there will be more changes that make the bump obviously necessary.

Cc: Bryce Harrington <bryce@osg.samsung.com>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Allow backends to group repaint flushes

Implement new repaint_begin and repaint_flush hooks inside
weston_backend, allowing backends to gang together repaints which
trigger at the same time.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Switch to global output repaint timer

In preparation for grouping output repaint together where possible,
switch the per-output repaint timer, to a global timer which iterates
across all outputs.

This is implemented by storing the absolute time for the next repaint
for each output locally, and maintaining a global timer which iterates
all of them, scheduling the repaint for the first available time.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Pekka: The comment about 1 ms delay.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

launcher: Add sysmacros.h include for major()

glibc 2.25 produces a warning when sysmacros.h is not directly included
but major() is used, as it is intended to be moved to sysmacros.h and
only there. Include it to keep the build happy.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>

Fix 'implicit fallthrough' warning with new GCC

GCC 7 now warns on case statements falling through without an explicit
comment that falling through is OK. Insert some to make it happy.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>

Change boolean repaint_scheduled to quad-state enum

repaint_scheduled is actually cleverly a quad-state, disguised as a
boolean. There are four possible conditions for the repaint loop to be
in at any time:
  - loop idle; no repaint will occur until specifically requested, which
    may be never (repaint_scheduled == 0)
  - loop schedule to begin: the loop was previously idle, but due to a
    repaint-schedule request, we will call the start_repaint_loop hook
    in the next idle task
  - repaint scheduled: the compositor has definitively scheduled a
    repaint request for this output, which will occur in fixed time
  - awaiting repaint completion: the backend has not yet signaled
    completion of the last repaint request, and the compositor will not
    schedule another until it does so

All but the first condition were previously conflated as
repaint_scheduled == 1, but break them out into separate conditions to
aid clarity, backed up by some asserts.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Change repaint_needed to bool

It is only used as a binary value.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Don't delay initial output paint

On startup, we cannot lock on to the repaint timer because it is unknown
to us. We deal with this by claiming that the moment of entry into the
repaint loop is the moment a frame returned, causing finish_frame to
delay our initial repaint to (refresh_time - repaint_delay), typically
around 9ms of utterly wasted time.

Add an explicit stamp == NULL, to determine that we are just beginning
our repaint loop, that the timings are in fact totally invalid, and that
it would be beneficial to repaint the output immediately. This will only
trigger when the display had previously been disabled or the previous
state is unknown, e.g. at startup, or coming back from DPMS off.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Calculate next-frame target time in absolute space

Rather than determining the time until next-frame repaint in relative
space (time until repaint), determine it first in absolute space, and
then later convert this to relative.

This will later allow us to store these per-output, so we can have a
single idle timer which will allow us to aggregate multiple repaints
together when timing allows.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

timespec: Add timespec subtraction helpers

Add helpers to subtract two timespecs, then return the difference in
either milliseconds or nanoseconds. These will be used to compare
timestamps during the repaint cycle.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

timespec: Add timespec_to_msec helper

Paralleling timespec_to_nsec, converts to milliseconds.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Pekka: added doc about flooring]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

timespec: Add timespec_add_msec helper

Add a (timespec) = (timespec) + (msec) helper, to save intermediate
conversions in its users.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

timespec: Add timespec_add_nsec helper

Add a (timespec) = (timespec) + (nsec) helper, to save intermediate
conversions to nanoseconds in its users.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-drm: pageflip timeout implementation

Weston will not repaint until previous update has been acked by a
pageflip event coming from the drm driver. However, some buggy drivers
won’t return those events or will stop sending them at some point and
Weston output repaints will completely freeze. To ease developers’ task
in testing their drivers, this patch makes compositor-drm use a timer
to detect cases where those pageflip events stop coming.

This timeout implementation is software only and includes basic
features usually found in a watchdog. We simply exit Weston gracefully
with a log message and an exit code when the timout is reached.

The timeout value can be set via weston.ini by adding a
pageflip-timeout=<MILLISECONDS> entry under [core]
section. Setting it to 0 disables the timeout feature.

v2:
- Made sure we would get both the pageflip and the vblank events before
  stopping the timer.
- Reordered the error and success cases in
  drm_output_pageflip_timer_create() to be more in line with the rest
  of the code.

v3:
- Reordered (de)arming of the timer with the code around it to avoid it
  being rearmed before the current dearming.
- Return the proper value for the dispatcher in the pageflip_timeout
  callback.
- Also display the output name in case the timer fires.

v4:
- Reordered a forgotten timer rearming after its drmModePageFlip().

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=83884
Signed-off-by: Frederic Plourde <frederic.plourde at collabora.co.uk>
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

clients/simple-egl: add delay option

This emulates extra drawing work by usleep().

This is an enhancement to reproduce the problem in the bug report.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98833
[Pekka: reordered the help text]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

clients/weston-info: print unknown formats better

Don't just dump the raw 32-bit values, try to interpret it as a DRM
fourcc too.

This prints properly the formats YUYV, NV12 and YU12 supported by
Weston.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

libweston/launcher: use C99 initializers for the iface(s)

Makes the code easier to read and browse through.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

libweston/launcher: annotate iface(s) as constant data

Already considered and handled as such.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

compositor-drm: Make scanout view preparation more stringent

Don't import buffers which span multiple outputs, short-cut any attempt
to import SHM buffers, and ignore buffers with a global alpha set.

I'm not convinced all of these conditions entirely make sense, but this
at least makes them equally nonsensical.

Differential Revision: https://phabricator.freedesktop.org/D1414

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>

compositor-drm: Construct mode list in create_output_for_connector

And properly deconstruct it in drm_output_destroy.

Might be useful for finding out which modes are supported
before even setting them, in case we want to extend the
modesetting API.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

compositor-drm: Try to preserve existing output routing

Previously in picking CRTC -> encoder -> connecting routing, we went for
the first triplet we found which claimed to work.

Preserving the existing routing means that startup will be faster: on a
multi-head system, changing the routing implies disabling both CRTCs,
then re-enabling them with a new configuration, which may involve
retraining links etc.

Furthermore, the existing routing may be set for a reason; each
CRTC/encoder is not necessarily as capable as the other, so the routing
may be configured to stay within such device limits.

Try where possible to respect the routing we pick up, rather than
blithely configuring our own.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-drm: Ignore non-KMS devices

Given that we can have render-only devices, or vgem in a class of its
own, ignore any non-KMS devices in compositor-drm's device selection.
For x86 platforms, this is mostly a non-issue since we look at the udev
boot_vga issue, but other architectures which lack this, and have
multiple KMS devices present, will hit this.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reported-by: Thierry Reding <treding@nvidia.com>
Reported-by: Daniel Vetter <daniel.vetter@intel.com>

configure.ac: Bump to 2.0.90 for open development

configure.ac: bump to version 2.0.0 for the official release

releasing: Should only publish publican docs for actual releases

configure.ac: bump to version 1.99.94 for the RC2 release

config-parser: Export weston_config_next_section

This symbol wasn’t exported from the weston binary, most likely due to
an oversight in 6e2c12496bbef3cc913cfe9d5f0aeb4d8b23b368, and because
internal modules can link against libshared.la directly it hasn’t been
found ever since.

This commit makes it possible for external modules to iterate over the
configuration file.

Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>

clients: Fix build without Cairo/GLES2

If we're building with EGL support generally, but without Cairo/GLESv2,
building the clients fail, because window.c defines the EGL native
types, however platform.h also brings these in.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Bryce Harrington <brycef@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>

screen-share: Use wl_list_for_each_safe on destroy

Destroying the shared seat removes the link from so->seat_list.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>

screen-share: Avoid NULL dereference

Don't try to dereference the seat if it's NULL.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

configure.ac: bump to version 1.99.93 for the RC1 release

(multiple): Use standard permission notice

A handful of source files were not using the MIT Expat text in
COPYING. Update these files to bring them inline with the rest,
standardizing on the MIT Expat text.

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-drm: Mark eDP connection as internal

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

compositor: Improve xwayland warning message

And fix formatting.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

compositor-drm: Remove connector_allocator

Remove the last usage of connector_allocator, which was to check for
displays which have been hot-unplugged, and replace it with an array
which doesn't rely on the connector IDs remaining below 32 (or 64).

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>

compositor-drm: Avoid connector_allocator for hotplugs

Rather than using connector_allocator to determine whether an output is
newly connected or not, use a list walk across all outputs instead.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>

compositor-drm: Remove crtc_allocator

crtc_allocator was used as a bitmask of CRTC IDs, so we didn't try to
use the same CRTC for multiple outputs. Unfortunately, this only works
to the extent that CRTC object IDs fit within the bitmask; though they
were previously, they are not guaranteed to be under 32 or even 64.

Replace the only use of crtc_allocator with a list walk across outputs.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>

configure.ac: bump to version 1.99.92 for the beta release

Revert "clients: teach simple-dmabuf-v4l to deal with flipped input"

This reverts commit 0fee977c46423e496a6eda6418c31bfe09a1f27b.

This commit introduces a requirement on v4l2_query_ext_ctrl and
VIDIOC_QUERY_EXT_CTRL, which were introduced in kernel 3.17. Some Ubuntu
LTS releases ship with much older kernels (and, significantly, UAPI),
which don't have these.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>

launcher: don't try to switch to weston's vt

Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

ivi-shell: Damage view below after unmapping

If ivilayer or ivisurf of ivi_view is made invisible in the
commit_changes call, we have to damage the weston_view below this
ivi_view. Otherwise content of this ivi_view will stay visible.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

tests: doc iterating in the runner

The iteration counter cannot be used to detect non-iterated tests
defined with TEST and FAIL_TEST.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

compositor: damage pending subsurfaces when committing them

When a client changes the subsurfaces state, we need to damage
them so the result is visible. We do that by flagging the surfaces
when the state changes and causing damage when committing the
state. This prevents normal repaints from considering these changes
until a commit has happened, and allows the client to atomically
schedule several changes.

This fixes the subsurface_z_order test, which is now marked as expected
to succeed.

Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>

tests: add subsurface-shot test

This is marked as a FAIL_TEST, because the last image comparison fails
due to a bug in Weston.

Jointly authored by Pekka and Emilio.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
[Pekka: move weston-tests-env as terminator to EXTRA_DIST, change
ok/FAIL to PASS/FAIL, write diff image only on fail.]
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>

tests: put screenshots to ./logs by default

Logs is where we write all our custom test logs, let's also put the
screenshots in the same place by default from cluttering the base
directory.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

tests: implement get_test_name()

Screenshot tests often want to use the test name for writing out images.
This is a helper to get the test name without writing it multiple times
in the source.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

tests/shell: change background color

Pick the color 0xCC336699 as AARRGGBB, as if blended on black. This is
the color used with developing the sub-surface shot tests.

No other big reason than it should not be black to have better chances
of catching blending problems.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

tests/shell: get rid of static variables

Stop using static variables and clean up when we're done.

[Emilio: update to latest weston_layer API]

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
[Pekka: fix build after previous commit's fix]

tests: add test-desktop-shell

This is a new desktop shell plugin, specifically written for tests. It
implements the bare minimum of a WM with predictable window positioning.
It offers a known static background without forking any helper clients
and therefore avoids any races with executing screenshot-based tests.
Not forking unused helper clients also reduces the load during a test
run.

The code was written by Quentin as a part of a much larger private
patch. Pekka, following Emilio's example, extracted just the shell
plugin parts as a stand-alone patch and wrote the commit message.

[Emilio: update to latest weston_layer and shell_init API]

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
[Pekka: fix build]

clients: teach simple-dmabuf-v4l to deal with flipped input

The v4l2 API can be queried to detect if the input video image is
horizontally or vertically flipped. If the image is y-flipped, we can
set the ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_Y_INVERT flag to notify the
compositor.  If the image is h-flipped, we can only print a warning
since linux_buffer_params_v1 does not support horizontal flipping.

Signed-off-by: Micah Fedke <micah.fedke@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-drm: don't pass option_connector to create_outputs

The connector option is a part of drm_backend struct.
Therefore, it is not needed to pass it as an argument
to create_outputs function.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>

compositor-drm: update connectors with connector config

weston can be started with --connector option to be initialized
with a particular output. But in the update_outputs this option
is not considered and output is created for all the available
connectors. This patch fixes this issue by considering
the option for connectors in the update_outputs.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>

compositor-drm: don't put y-inverted / interlaced / bottom-first dmabufs on overlays

This patch checks the attribute flags on incoming dmabufs and refuses to
put them overlays if they have any of the flags set (currently:
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_Y_INVERT,
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_INTERLACED and
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_BOTTOM_FIRST), instead defaulting to
the gl-renderer which can handle some of the flags.

This check should be superceded by buffer transforms, when they become
available.

Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

ivi-shell: simplify commit_changes function

It is a better idea to use one for loop instead
of using three nested for loops.

We do not need to update the transformation of
views according to the scenegraph. The important
thing is that every visible view is updated before
commit_changes function returns.

The first if statement checks, if the view is on
the currently rendered scenegraph. The second if
statement checks, if the view's layer or surface
is visible. These checks ensure that we do not
update the transformation matrix of a view, which
is not visible on the screen.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: minor whitespace fix]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

ivi-shell: pass only ivi_view to update_prop

We can get ivisurf, ivilayer and iviscreen
easily from ivi_view. Then, we do not need
to check, if ivi_view's layer is the same
as the given ivilayer.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

releasing: Copyedits

libweston: grammar fix to recent comment

tests: Remove buffer-count

buffer-count was introduced in line with a Mesa change which forced
an earlier block on frame events to try to enforce double-buffering
where available.

The Mesa change has since been reverted (Mesa commit 9ca6711faa), as
this had unpleasant interactions with buffer_age in particular, so this
test is no longer valid.

Additionally, it only worked on backends which initialised EGL (not
headless-backend, where tests generally run), which can be flaky due to
initialisation races. Not only that, but on the DRM backend, we can
legitimately enter triple-buffering due to promoting the surface to a
hardware plane, skipping GPU composition.

In light of all this, just remove the test.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>

Move weston-egl-ext.h to shared

Given that it's used by clients, it's really the very definition of
shared.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>

Add comments and whitespace to repaint machinery

repaint_needed / repaint_scheduled are surprisingly subtle. Explode the
conditional with side-effects into more obvious separate calls, and
document what they do.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

systemd: fix Wincompatible-pointer-type

The parameter is passed in safe_strtoint function.
The function expects its parameters in int32_t
data type. Therefore, c compiler throws a
-Wincompatible-pointer-type warning.

This patch changes data type of the parameter
to int32_t.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

ivi-shell: add screen_add_layers test

Test adds 3 layers in a screen's render order list.
First, it adds in the order which layers are created.
Later, test cleans the render order list,
and adds layers in reverse order.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

ivi-shell: add layer_add_surfaces test

Test adds 3 surfaces in a layer's render order list.
First, it adds in the order which surfaces are created.
Later, test cleans the render order list, and adds surfaces in reverse
order.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

ivi-shell: don't check layer is already on the screen

If a layer is removed from a screen's render order list, but the
changes are not commited. Then, the layer could not be added to the
same screen. Because on_screen property of the layer is only changed
in ivi_layout_commit_changes API, when active render order of the screen
is changed.

It is not possible to change the order of layers in a screen without
clearing and commiting the changes before. This patch fixes this issue.

After this patch, the pending render order list of a screen is always
modified regardless of its active render order list.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

ivi-shell: don't check view is rendered before adding surface

If a surface is removed from a layer's render order list, but the
changes are not commited. Then, the surface could not be added to the
same layer. Because ivi_view of the surface is still in the render order
list of the layer.

It is not possible to change the order of surfaces in a layer without
clearing and commiting the changes before. This patch fixes this issue.

After this patch, the pending render order list of a layer is always
modified regardless of its active render order list.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

ivi-shell: fix typo in layer_destroy API

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-rdp: Fix build with freerdp2, take 2

Hi Pekka,

On 23 January 2017 at 14:15, Pekka Paalanen <ppaalanen@gmail.com> wrote:
> On Fri, 20 Jan 2017 11:31:08 +0100
> Emilio Pozuelo Monfort <pochu@debian.org> wrote:
>> This version works for me...
>
> Hi guys,
>
> I found another guest to the party. Using net-misc/freerdp-2.0.0_pre20160722
> Weston master fails to build with:
>
>
> In file included from /usr/include/freerdp2/freerdp/codecs.h:25:0,
>                  from /usr/include/freerdp2/freerdp/freerdp.h:46,
>                  from /home/pq/git/weston/libweston/compositor-rdp.c:69:
> /home/pq/git/weston/libweston/compositor-rdp.c: In function ‘rdp_peer_context_new’:
> /usr/include/freerdp2/freerdp/codec/color.h:85:72: error: ‘FREERDP_PIXEL_FORMAT_TYPE_BGRA’ undeclared (first use in this function)
> [... snip ...]
>
> However, updating to net-misc/freerdp-2.0.0_pre20161219 allows things
> to build for me again. There is just one warning:

How about this fixup?

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-drm: Restore use-current-mode functionality

It got lost during the porting to the config API.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

releasing: Drop extraneous word in docs

configure.ac: bump to version 1.99.91 for the alpha release

tests: add missing include

The int32_t type is defined in stdint.h.

The musl C library is very conservative in the headers that it
internally includes, and stdint.h is not included by any other header,
unlike with glibc or uClibc, which breaks the build.

Add the missing header.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

gitignore: version headers are in libweston/

Switching back and forth to e.g. weston 1.11 branch can leave
these files in src/. Fix the gitignores to not hide them from
git-status.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-rdp: Fix build with freerdp2

Based on a patch from John Moser <john.r.moser@gmail.com>

https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=850658

Signed-off-by: Emilio Pozuelo Monfort <pochu@debian.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>

clients: fix errno handling

clients/editor.c: In function ‘read_file’:
clients/editor.c:1578:16: warning: logical ‘or’ applied to non-boolean
constant [-Wlogical-op]
  errno = errsv || EINVAL;

This works in the shell, but not in C. Introduced in 411ffabbb56b

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Emilio Pozuelo Monfort <pochu@debian.org>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

xwm: explain the read_properties() in xserver_map_shell_surface()

To me it was not obvious that this call is necessary, so provide some
rationale.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>