Peter Zijlstra [Tue, 4 May 2021 20:43:45 +0000 (22:43 +0200)]
sched: Rename sched_info_{queued,dequeued}
For consistency, rename {queued,dequeued} to {enqueue,dequeue}.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Link: https://lkml.kernel.org/r/20210505111525.061402904@infradead.org
Peter Zijlstra [Tue, 4 May 2021 20:43:48 +0000 (22:43 +0200)]
delayacct: Use sched_clock()
Like all scheduler statistics, use sched_clock() based time.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Link: https://lkml.kernel.org/r/20210505111525.001031466@infradead.org
Pierre Gondois [Tue, 4 May 2021 09:07:43 +0000 (10:07 +0100)]
sched/fair: Fix negative energy delta in find_energy_efficient_cpu()
find_energy_efficient_cpu() (feec()) searches the best energy CPU
to place a task on. To do so, compute_energy() estimates the energy
impact of placing the task on a CPU, based on CPU and task utilization
signals.
Utilization signals can be concurrently updated while evaluating a
performance domain (pd). In some cases, this leads to having a
'negative delta', i.e. placing the task in the pd is seen as an
energy gain. Thus, any further energy comparison is biased.
In case of a 'negative delta', return prev_cpu since:
1. a 'negative delta' happens in less than 0.5% of feec() calls,
on a Juno with 6 CPUs (4 little, 2 big)
2. it is unlikely to have two consecutive 'negative delta' for
a task, so if the first call fails, feec() will correctly
place the task in the next feec() call
3. EAS current behavior tends to select prev_cpu if the task
doesn't raise the OPP of its current pd. prev_cpu is EAS's
generic decision
4. prev_cpu should be preferred to returning an error code.
In the latter case, select_idle_sibling() would do the placement,
selecting a big (and not energy efficient) CPU. As 3., the task
would potentially reside on the big CPU for a long time
Reported-by: Xuewen Yan <xuewen.yan@unisoc.com>
Suggested-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Link: https://lkml.kernel.org/r/20210504090743.9688-3-Pierre.Gondois@arm.com
Pierre Gondois [Tue, 4 May 2021 09:07:42 +0000 (10:07 +0100)]
sched/fair: Only compute base_energy_pd if necessary
find_energy_efficient_cpu() searches the best energy CPU
to place a task on. To do so, the energy of each performance domain
(pd) is computed w/ and w/o the task placed on it.
The energy of a pd w/o the task (base_energy_pd) is computed prior
knowing whether a CPU is available in the pd.
Move the base_energy_pd computation after looping through the CPUs
of a pd and only compute it if at least one CPU is available.
Suggested-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Link: https://lkml.kernel.org/r/20210504090743.9688-2-Pierre.Gondois@arm.com
Rik van Riel [Thu, 22 Apr 2021 17:02:36 +0000 (13:02 -0400)]
sched,fair: Skip newidle_balance if a wakeup is pending
The try_to_wake_up function has an optimization where it can queue
a task for wakeup on its previous CPU, if the task is still in the
middle of going to sleep inside schedule().
Once schedule() re-enables IRQs, the task will be woken up with an
IPI, and placed back on the runqueue.
If we have such a wakeup pending, there is no need to search other
CPUs for runnable tasks. Just skip (or bail out early from) newidle
balancing, and run the just woken up task.
For a memcache like workload test, this reduces total CPU use by
about 2%, proportionally split between user and system time,
and p99 and p95 application response time by 10% on average.
The schedstats run_delay number shows a similar improvement.
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210422130236.0bb353df@imladris.surriel.com
Oleg Nesterov [Mon, 10 May 2021 16:15:22 +0000 (18:15 +0200)]
sched/core: Remove the pointless BUG_ON(!task) from wake_up_q()
container_of() can never return NULL - so don't check for it pointlessly.
[ mingo: Twiddled the changelog. ]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210510161522.GA32644@redhat.com
Gautham R. Shenoy [Tue, 11 May 2021 15:16:09 +0000 (20:46 +0530)]
sched/fair: Fix clearing of has_idle_cores flag in select_idle_cpu()
In commit:
9fe1f127b913 ("sched/fair: Merge select_idle_core/cpu()")
in select_idle_cpu(), we check if an idle core is present in the LLC
of the target CPU via the flag "has_idle_cores". We look for the idle
core in select_idle_cores(). If select_idle_cores() isn't able to find
an idle core/CPU, we need to unset the has_idle_cores flag in the LLC
of the target to prevent other CPUs from going down this route.
However, the current code is unsetting it in the LLC of the current
CPU instead of the target CPU. This patch fixes this issue.
Fixes:
9fe1f127b913 ("sched/fair: Merge select_idle_core/cpu()")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/1620746169-13996-1-git-send-email-ego@linux.vnet.ibm.com
Linus Torvalds [Tue, 11 May 2021 16:43:16 +0000 (09:43 -0700)]
Merge tag 'for-5.13-rc1-part2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Handle transaction start error in btrfs_fileattr_set()
This is fix for code introduced by the new fileattr merge"
* tag 'for-5.13-rc1-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: handle transaction start error in btrfs_fileattr_set
Ritesh Harjani [Fri, 30 Apr 2021 16:00:55 +0000 (21:30 +0530)]
btrfs: handle transaction start error in btrfs_fileattr_set
Add error handling in btrfs_fileattr_set in case of an error while
starting a transaction. This fixes btrfs/232 which otherwise used to
fail with below signature on Power.
btrfs/232 [ 1119.474650] run fstests btrfs/232 at 2021-04-21 02:21:22
<...>
[ 1366.638585] BUG: Unable to handle kernel data access on read at 0xffffffffffffff86
[ 1366.638768] Faulting instruction address: 0xc0000000009a5c88
cpu 0x0: Vector: 380 (Data SLB Access) at [
c000000014f177b0]
pc:
c0000000009a5c88: btrfs_update_root_times+0x58/0xc0
lr:
c0000000009a5c84: btrfs_update_root_times+0x54/0xc0
<...>
pid = 24881, comm = fsstress
btrfs_update_inode+0xa0/0x140
btrfs_fileattr_set+0x5d0/0x6f0
vfs_fileattr_set+0x2a8/0x390
do_vfs_ioctl+0x1290/0x1ac0
sys_ioctl+0x6c/0x120
system_call_exception+0x3d4/0x410
system_call_common+0xec/0x278
Fixes:
97fc29775487 ("btrfs: convert to fileattr")
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Mon, 10 May 2021 22:23:58 +0000 (15:23 -0700)]
Merge tag 'perf-tools-fixes-for-v5.13-2021-05-10' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix swapping of cpu_map and stat_config records.
- Fix dynamic libbpf linking.
- Disallow -c and -F option at the same time in 'perf record'.
- Update headers with the kernel originals.
- Silence warning for JSON ArchStd files.
- Fix a build error on arm64 with clang.
* tag 'perf-tools-fixes-for-v5.13-2021-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers UAPI: Sync perf_event.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools include UAPI powerpc: Sync errno.h with the kernel headers
tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools headers UAPI: Sync files changed by landlock, quotactl_path and mount_settattr new syscalls
perf tools: Fix a build error on arm64 with clang
tools headers kvm: Sync kvm headers with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf tools: Fix dynamic libbpf link
perf session: Fix swapping of cpu_map and stat_config records
perf jevents: Silence warning for ArchStd files
perf record: Disallow -c and -F option at the same time
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h headers
Linus Torvalds [Mon, 10 May 2021 21:10:42 +0000 (14:10 -0700)]
Merge tag 'for-5.13-rc1-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"First batch of various fixes, here's a list of notable ones:
- fix unmountable seed device after fstrim
- fix silent data loss in zoned mode due to ordered extent splitting
- fix race leading to unpersisted data and metadata on fsync
- fix deadlock when cloning inline extents and using qgroups"
* tag 'for-5.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize return variable in cleanup_free_space_cache_v1
btrfs: zoned: sanity check zone type
btrfs: fix unmountable seed device after fstrim
btrfs: fix deadlock when cloning inline extents and using qgroups
btrfs: fix race leading to unpersisted data and metadata on fsync
btrfs: do not consider send context as valid when trying to flush qgroups
btrfs: zoned: fix silent data loss after failure splitting ordered extent
Linus Torvalds [Mon, 10 May 2021 19:30:45 +0000 (12:30 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Lots of bug fixes.
- Fix virtualization of RDPID
- Virtualization of DR6_BUS_LOCK, which on bare metal is new to this
release
- More nested virtualization migration fixes (nSVM and eVMCS)
- Fix for KVM guest hibernation
- Fix for warning in SEV-ES SRCU usage
- Block KVM from loading on AMD machines with 5-level page tables, due
to the APM not mentioning how host CR4.LA57 exactly impacts the
guest.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (48 commits)
KVM: SVM: Move GHCB unmapping to fix RCU warning
KVM: SVM: Invert user pointer casting in SEV {en,de}crypt helpers
kvm: Cap halt polling at kvm->max_halt_poll_ns
tools/kvm_stat: Fix documentation typo
KVM: x86: Prevent deadlock against tk_core.seq
KVM: x86: Cancel pvclock_gtod_work on module removal
KVM: x86: Prevent KVM SVM from loading on kernels with 5-level paging
KVM: X86: Expose bus lock debug exception to guest
KVM: X86: Add support for the emulation of DR6_BUS_LOCK bit
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
KVM: x86: Hide RDTSCP and RDPID if MSR_TSC_AUX probing failed
KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to guest CPU model
KVM: x86: Move uret MSR slot management to common x86
KVM: x86: Export the number of uret MSRs to vendor modules
KVM: VMX: Disable loading of TSX_CTRL MSR the more conventional way
KVM: VMX: Use common x86's uret MSR list as the one true list
KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list
KVM: VMX: Configure list of user return MSRs at module init
KVM: x86: Add support for RDPID without RDTSCP
KVM: SVM: Probe and load MSR_TSC_AUX regardless of RDTSCP support in host
...
Arnaldo Carvalho de Melo [Sun, 9 May 2021 13:29:10 +0000 (10:29 -0300)]
tools headers UAPI: Sync perf_event.h with the kernel sources
To pick up the changes in:
2b26f0aa004995f4 ("perf: Support only inheriting events if cloned with CLONE_THREAD")
2e498d0a74e5b88a ("perf: Add support for event removal on exec")
547b60988e631f74 ("perf: aux: Add flags for the buffer format")
55bcf6ef314ae8ba ("perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE")
7dde51767ca5339e ("perf: aux: Add CoreSight PMU buffer formats")
97ba62b278674293 ("perf: Add support for SIGTRAP on perf events")
d0d1dd628527c77d ("perf core: Add PERF_COUNT_SW_CGROUP_SWITCHES event")
Also change the expected sizeof(struct perf_event_attr) from 120 to 128 due to
fields being added for the SIGTRAP changes.
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 13:24:29 +0000 (10:24 -0300)]
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:
4e6292114c741221 ("x86/paravirt: Add new features for paravirt patching")
a161545ab53b174c ("x86/cpufeatures: Enumerate Intel Hybrid Technology feature bit")
a89dfde3dc3c2dbf ("x86: Remove dynamic NOP selection")
b8921dccf3b25798 ("x86/cpufeatures: Add SGX1 and SGX2 sub-features")
f21d4d3b97a86035 ("x86/cpufeatures: Enumerate #DB for bus lock detection")
f333374e108e7e4c ("x86/cpufeatures: Add the Virtual SPEC_CTRL feature")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Babu Moger <babu.moger@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 13:21:33 +0000 (10:21 -0300)]
tools include UAPI powerpc: Sync errno.h with the kernel headers
To pick the change in:
7de21e679e6a789f ("powerpc: fix EDEADLOCK redefinition error in uapi/asm/errno.h")
That will make the errno number -> string tables to pick this change on powerpc.
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/errno.h' differs from latest version at 'arch/powerpc/include/uapi/asm/errno.h'
diff -u tools/arch/powerpc/include/uapi/asm/errno.h arch/powerpc/include/uapi/asm/errno.h
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 13:19:37 +0000 (10:19 -0300)]
tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
To bring in the change made in this cset:
5e21a3ecad1500e3 ("x86/alternative: Merge include files")
This just silences these perf tools build warnings, no change in the tools:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
Cc: Borislav Petkov <bp@suse.de>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 13:06:40 +0000 (10:06 -0300)]
tools headers UAPI: Sync linux/prctl.h with the kernel sources
To pick a new prctl introduced in:
201698626fbca1cf ("arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)")
That results in
$ grep prctl tools/perf/trace/beauty/*.sh
tools/perf/trace/beauty/prctl_option.sh:printf "static const char *prctl_options[] = {\n"
tools/perf/trace/beauty/prctl_option.sh:egrep $regex ${header_dir}/prctl.h | grep -v PR_SET_PTRACER | \
tools/perf/trace/beauty/prctl_option.sh:printf "static const char *prctl_set_mm_options[] = {\n"
tools/perf/trace/beauty/prctl_option.sh:egrep $regex ${header_dir}/prctl.h | \
tools/perf/trace/beauty/x86_arch_prctl.sh:prctl_arch_header=${x86_header_dir}/prctl.h
tools/perf/trace/beauty/x86_arch_prctl.sh: printf "#define x86_arch_prctl_codes_%d_offset %s\n" $idx $first_entry
tools/perf/trace/beauty/x86_arch_prctl.sh: printf "static const char *x86_arch_prctl_codes_%d[] = {\n" $idx
tools/perf/trace/beauty/x86_arch_prctl.sh: egrep -q $regex ${prctl_arch_header} && \
tools/perf/trace/beauty/x86_arch_prctl.sh: (egrep $regex ${prctl_arch_header} | \
$ tools/perf/trace/beauty/prctl_option.sh > before
$ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
--- before 2021-05-09 10:06:10.
064559675 -0300
+++ after 2021-05-09 10:06:21.
319791396 -0300
@@ -54,6 +54,8 @@
[57] = "SET_IO_FLUSHER",
[58] = "GET_IO_FLUSHER",
[59] = "SET_SYSCALL_USER_DISPATCH",
+ [60] = "PAC_SET_ENABLED_KEYS",
+ [61] = "PAC_GET_ENABLED_KEYS",
};
static const char *prctl_set_mm_options[] = {
[1] = "START_CODE",
$
Now users can do:
# perf trace -e syscalls:sys_enter_prctl --filter "option==PAC_GET_ENABLED_KEYS"
^C#
# trace -v -e syscalls:sys_enter_prctl --filter "option==PAC_GET_ENABLED_KEYS"
New filter for syscalls:sys_enter_prctl: (option==0x3d) && (common_pid != 5519 && common_pid != 3404)
^C#
And also when prctl appears in a session, its options will be
translated to the string.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 12:55:30 +0000 (09:55 -0300)]
tools headers UAPI: Sync files changed by landlock, quotactl_path and mount_settattr new syscalls
To pick the changes in these csets:
a49f4f81cb48925e ("arch: Wire up Landlock syscalls")
2a1867219c7b27f9 ("fs: add mount_setattr()")
fa8b90070a80bb1a ("quota: wire up quotactl_path")
That silences these perf build warnings and add support for those new
syscalls in tools such as 'perf trace'.
For instance, this is now possible:
# ~acme/bin/perf trace -v -e landlock*
event qualifier tracepoint filter: (common_pid != 129365 && common_pid != 3502) && (id == 444 || id == 445 || id == 446)
^C#
That is tha filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep landlock tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
444 common landlock_create_ruleset sys_landlock_create_ruleset
445 common landlock_add_rule sys_landlock_add_rule
446 common landlock_restrict_self sys_landlock_restrict_self
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: James Morris <jamorris@linux.microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mickaël Salaün <mic@linux.microsoft.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 7 May 2021 08:54:35 +0000 (17:54 +0900)]
perf tools: Fix a build error on arm64 with clang
Since clang's -Wmissing-field-initializers warns if a data
structure is initialized with a signle NULL as below,
----
tools/perf $ make CC=clang LLVM=1
...
arch/arm64/util/kvm-stat.c:74:9: error: missing field 'ops' initializer [-Werror,-Wmissing-field-initializers]
{ NULL },
^
1 error generated.
----
add another field initializer expressly as same as other
arch's kvm-stat.c code.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Link: http://lore.kernel.org/lkml/162037767540.94840.15758657049033010518.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 12:45:25 +0000 (09:45 -0300)]
tools headers kvm: Sync kvm headers with the kernel sources
To pick the changes in:
3c0c2ad1ae75963c ("KVM: VMX: Add basic handling of VM-Exit from SGX enclave")
None of them trigger any changes in tooling, this time this is just to silence
these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 12:39:02 +0000 (09:39 -0300)]
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
15fb7de1a7f5af0d ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
3bf725699bf62494 ("KVM: arm64: Add support for the KVM PTP service")
4cfdd47d6d95aca4 ("KVM: SVM: Add KVM_SEV SEND_START command")
54526d1fd59338fd ("KVM: x86: Support KVM VMs sharing SEV context")
5569e2e7a650dfff ("KVM: SVM: Add support for KVM_SEV_SEND_CANCEL command")
8b13c36493d8cb56 ("KVM: introduce KVM_CAP_SET_GUEST_DEBUG2")
af43cbbf954b50ca ("KVM: SVM: Add support for KVM_SEV_RECEIVE_START command")
d3d1af85e2c75bb5 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
fe7e948837f312d8 ("KVM: x86: Add capability to grant VM access to privileged SGX attribute")
That don't cause any change in tooling as it doesn't introduce any new
ioctl.
$ grep kvm tools/perf/trace/beauty/*.sh
tools/perf/trace/beauty/kvm_ioctl.sh:printf "static const char *kvm_ioctl_cmds[] = {\n"
tools/perf/trace/beauty/kvm_ioctl.sh:egrep $regex ${header_dir}/kvm.h | \
$
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
$
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jianyong Wu <jianyong.wu@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Nathan Tempelman <natet@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steve Rutherford <srutherford@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 8 May 2021 20:50:20 +0000 (22:50 +0200)]
perf tools: Fix dynamic libbpf link
Justin reported broken build with LIBBPF_DYNAMIC=1.
When linking libbpf dynamically we need to use perf's
hashmap object, because it's not exported in libbpf.so
(only in libbpf.a).
Following build is now passing:
$ make LIBBPF_DYNAMIC=1
BUILD: Doing 'make -j8' parallel build
...
$ ldd perf | grep libbpf
libbpf.so.0 => /lib64/libbpf.so.0 (0x00007fa7630db000)
Fixes:
eee19501926d ("perf tools: Grab a copy of libbpf's hashmap")
Reported-by: Justin M. Forbes <jforbes@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210508205020.617984-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dmitry Koshelev [Thu, 6 May 2021 13:11:49 +0000 (13:11 +0000)]
perf session: Fix swapping of cpu_map and stat_config records
'data' field in perf_record_cpu_map_data struct is 16-bit
wide and so should be swapped using bswap_16().
'nr' field in perf_record_stat_config struct should be
swapped before being used for size calculation.
Signed-off-by: Dmitry Koshelev <karaghiozis@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210506131244.13328-1-karaghiozis@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 6 May 2021 22:56:40 +0000 (15:56 -0700)]
perf jevents: Silence warning for ArchStd files
JSON files in the level 1 directory are used for ArchStd events (see
preprocess_arch_std_files), as such they shouldn't be warned about.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210506225640.1461000-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 2 Apr 2021 09:40:20 +0000 (18:40 +0900)]
perf record: Disallow -c and -F option at the same time
It's confusing which one is effective when the both options are given.
The current code happens to use -c in this case but users might not be
aware of it. We can change it to complain about that instead of relying
on the implicit priority.
Before:
$ perf record -c 111111 -F 99 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.031 MB perf.data (8 samples) ]
$ perf evlist -F
cycles: sample_period=111111
$
After:
$ perf record -c 111111 -F 99 true
cannot set frequency and period at the same time
$
So this change can break existing usages, but I think it's rare to have
both options and it'd be better changing them.
Suggested-by: Alexey Alexandrov <aalexand@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210402094020.28164-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 3 May 2021 14:53:37 +0000 (11:53 -0300)]
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes from these csets:
d0946a882e622022 ("perf/x86/intel: Hybrid PMU support for perf capabilities")
That cause no changes to tooling as it isn't adding any new MSR, just
some capabilities for a pre-existing one:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 3 May 2021 14:51:17 +0000 (11:51 -0300)]
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick the changes in:
b5b6f6a610127b17 ("drm/i915/gem: Drop legacy execbuffer support (v2)")
That don't result in any change in tooling as this is just adding a
comment.
Only silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 3 May 2021 14:48:26 +0000 (11:48 -0300)]
tools headers UAPI: Update tools's copy of drm.h headers
Picking the changes from:
b603e810f740e76b ("drm/uapi: document kernel capabilities")
Doesn't result in any tooling changes:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sun, 9 May 2021 21:17:44 +0000 (14:17 -0700)]
Linux 5.13-rc1
Linus Torvalds [Sun, 9 May 2021 21:03:33 +0000 (14:03 -0700)]
fbmem: fix horribly incorrect placement of __maybe_unused
Commit
b9d79e4ca4ff ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.
It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:
drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
^
Fix it.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 9 May 2021 20:42:39 +0000 (13:42 -0700)]
Merge tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Bit later than usual, I queued them all up on Friday then promptly
forgot to write the pull request email. This is mainly amdgpu fixes,
with some radeon/msm/fbdev and one i915 gvt fix thrown in.
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate
calculation"
* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Use device specific BO size & stride check.
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
drm/amd/pm: initialize variable
drm/radeon: Avoid power table parsing memory leaks
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/amd/display: Fix two cursor duplication when using overlay
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
fbmem: Mark proc_fb_seq_ops as __maybe_unused
drm/msm/dpu: Delete bonkers code
drm/i915/gvt: Prevent divided by zero when calculating refresh rate
amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
drm/amdgpu: Register VGA clients after init can no longer fail
drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
drm/amdgpu: fix r initial values
drm/amd/display: fix wrong statement in mst hpd debugfs
amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
drm/amd/display: Reject non-zero src_y and src_x for video planes
Linus Torvalds [Sun, 9 May 2021 20:25:14 +0000 (13:25 -0700)]
Merge tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Turns out the bio max size change still has issues, so let's get it
reverted for 5.13-rc1. We'll shake out the issues there and defer it
to 5.14 instead"
* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
Revert "bio: limit bio max size"
Linus Torvalds [Sun, 9 May 2021 20:19:29 +0000 (13:19 -0700)]
Merge tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small SMB3 chmultichannel related changesets (also for stable)
from the SMB3 test event this week.
The other fixes are still in review/testing"
* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: if max_channels set to more than one channel request multichannel
smb3: do not attempt multichannel to server which does not support it
smb3: when mounting with multichannel include it in requested capabilities
Linus Torvalds [Sun, 9 May 2021 20:14:34 +0000 (13:14 -0700)]
Merge tag 'sched-urgent-2021-05-09' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent PSI state corruption when schedule() races with cgroup
move.
A recent commit combined two PSI callbacks to reduce the number of
cgroup tree updates, but missed that schedule() can drop rq::lock
for load balancing, which opens the race window for
cgroup_move_task() which then observes half updated state.
The fix is to solely use task::ps_flags instead of looking at the
potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding
division which can lead to an off-by-one error exceeding the
buckets array size.
- Prevent unfairness caused by missing load decay when a task is
attached to a cfs runqueue.
The old load of the task was attached to the runqueue and never
removed. Fix it by enforcing the load update through the hierarchy
for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option"
* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unfairness caused by missing load decay
sched: Fix out-of-bound access in uclamp
psi: Fix psi state corruption when schedule() races with cgroup move
sched,doc: sched_debug_verbose cmdline should be sched_verbose
Linus Torvalds [Sun, 9 May 2021 20:07:03 +0000 (13:07 -0700)]
Merge tag 'locking-urgent-2021-05-09' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of locking related fixes and updates:
- Two fixes for the futex syscall related to the timeout handling.
FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
because it's not set the time namespace adjustment for clock
MONOTONIC is applied wrongly.
FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
always a relative timeout.
- Cleanups in the futex syscall entry points which became obvious
when the two timeout handling bugs were fixed.
- Cleanup of queued_write_lock_slowpath() as suggested by Linus
- Fixup of the smp_call_function_single_async() prototype"
* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Make syscall entry points less convoluted
futex: Get rid of the val2 conditional dance
futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
Revert
337f13046ff0 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
locking/qrwlock: Cleanup queued_write_lock_slowpath()
smp: Fix smp_call_function_single_async prototype
Linus Torvalds [Sun, 9 May 2021 20:00:26 +0000 (13:00 -0700)]
Merge tag 'perf_urgent_for_v5.13_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 perf fix from Borislav Petkov:
"Handle power-gating of AMD IOMMU perf counters properly when they are
used"
* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
Linus Torvalds [Sun, 9 May 2021 19:52:25 +0000 (12:52 -0700)]
Merge tag 'x86_urgent_for_v5.13_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A bunch of things accumulated for x86 in the last two weeks:
- Fix guest vtime accounting so that ticks happening while the guest
is running can also be accounted to it. Along with a consolidation
to the guest-specific context tracking helpers.
- Provide for the host NMI handler running after a VMX VMEXIT to be
able to run on the kernel stack correctly.
- Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
relevant - real hw supports both)
- A code generation improvement to TASK_SIZE_MAX through the use of
alternatives
- The usual misc and related cleanups and improvements"
* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Consolidate guest enter/exit logic to common helpers
context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
context_tracking: Consolidate guest enter/exit wrappers
sched/vtime: Move guest enter/exit vtime accounting to vtime.h
sched/vtime: Move vtime accounting external declarations above inlines
KVM: x86: Defer vtime accounting 'til after IRQ handling
context_tracking: Move guest exit vtime accounting to separate helpers
context_tracking: Move guest exit context tracking to separate helpers
KVM/VMX: Invoke NMI non-IST entry instead of IST entry
x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
x86/resctrl: Fix init const confusion
x86: Delete UD0, UD1 traces
x86/smpboot: Remove duplicate includes
x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant
Jens Axboe [Sun, 9 May 2021 03:49:48 +0000 (21:49 -0600)]
Revert "bio: limit bio max size"
This reverts commit
cd2c7545ae1beac3b6aae033c7f31193b3255946.
Alex reports that the commit causes corruption with LUKS on ext4. Revert
it for now so that this can be investigated properly.
Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sat, 8 May 2021 18:52:37 +0000 (11:52 -0700)]
Merge tag 'riscv-for-linus-5.13-mw1' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid over-allocating the kernel's mapping on !MMU systems,
which could lead to up to 2MiB of lost memory
- The SiFive address extension errata only manifest on rv64, they are
now disabled on rv32 where they are unnecessary
- A pair of late-landing cleanups
* tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: remove unused handle_exception symbol
riscv: Consistify protect_kernel_linear_mapping_text_rodata() use
riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y
riscv: Only extend kernel reservation if mapped read-only
Linus Torvalds [Sat, 8 May 2021 18:30:22 +0000 (11:30 -0700)]
drm/i915/display: fix compiler warning about array overrun
intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event
Status Indicator data, but then passes that buffer at offset 10 off as
an argument to drm_dp_channel_eq_ok().
End result: there are only 4 bytes remaining of the buffer, yet
drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns
about this case:
drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’:
drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread]
3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’}
In file included from drivers/gpu/drm/i915/display/intel_dp.c:38:
include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’
1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
| ^~~~~~~~~~~~~~~~~~~~
6:14 elapsed
This commit just extends the original array by 2 zero-initialized bytes,
avoiding the warning.
There may be some underlying bug in here that caused this confusion, but
this is at least no worse than the existing situation that could use
random data off the stack.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 8 May 2021 17:44:36 +0000 (10:44 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes in various drivers (qla2xxx, ufs,
scsi_debug, lpfc) one doc fix and a fairly large update to the fnic
driver to remove the open coded iteration functions in favour of the
scsi provided ones"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Use scsi_host_busy_iter() to traverse commands
scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io()
scsi: scsi_debug: Fix cmd_per_lun, set to max_queue
scsi: ufs: core: Narrow down fast path in system suspend path
scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
scsi: ufs: core: Do not put UFS power into LPM if link is broken
scsi: qla2xxx: Prevent PRLI in target mode
scsi: qla2xxx: Add marginal path handling support
scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found
scsi: ufs: core: Fix a typo in ufs-sysfs.c
scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command
scsi: lpfc: Fix DMA virtual address ptr assignment in bsg
scsi: lpfc: Fix illegal memory access on Abort IOCBs
scsi: blk-mq: Fix build warning when making htmldocs
Linus Torvalds [Sat, 8 May 2021 17:00:11 +0000 (10:00 -0700)]
Merge tag 'kbuild-v5.13-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
Steve French [Sat, 8 May 2021 00:33:51 +0000 (19:33 -0500)]
smb3: if max_channels set to more than one channel request multichannel
Mounting with "multichannel" is obviously implied if user requested
more than one channel on mount (ie mount parm max_channels>1).
Currently both have to be specified. Fix that so that if max_channels
is greater than 1 on mount, enable multichannel rather than silently
falling back to non-multichannel.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Steve French [Sat, 8 May 2021 01:00:41 +0000 (20:00 -0500)]
smb3: do not attempt multichannel to server which does not support it
We were ignoring CAP_MULTI_CHANNEL in the server response - if the
server doesn't support multichannel we should not be attempting it.
See MS-SMB2 section 3.2.5.2
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sat, 8 May 2021 15:49:54 +0000 (08:49 -0700)]
Merge tag 'powerpc-5.13-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc updates and fixes from Michael Ellerman:
"A bit of a mixture of things, tying up some loose ends.
There's the removal of the nvlink code, which dependend on a commit in
the vfio tree. Then the enablement of huge vmalloc which was in next
for a few weeks but got dropped due to conflicts. And there's also a
few fixes.
Summary:
- Remove the nvlink support now that it's only user has been removed.
- Enable huge vmalloc mappings for Radix MMU (P9).
- Fix KVM conversion to gfn-based MMU notifier callbacks.
- Fix a kexec/kdump crash with hot plugged CPUs.
- Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR.
- Restore alphabetic order of the selects under CONFIG_PPC.
Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin,
Sandipan Das, and Sourabh Jain"
* tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC
powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
powerpc/powernv/memtrace: Fix dcache flushing
powerpc/kexec_file: Use current CPU info while setting up FDT
powerpc/64s/radix: Enable huge vmalloc mappings
powerpc/powernv: remove the nvlink support
Steve French [Fri, 7 May 2021 23:24:11 +0000 (18:24 -0500)]
smb3: when mounting with multichannel include it in requested capabilities
In the SMB3/SMB3.1.1 negotiate protocol request, we are supposed to
advertise CAP_MULTICHANNEL capability when establishing multiple
channels has been requested by the user doing the mount. See MS-SMB2
sections 2.2.3 and 3.2.5.2
Without setting it there is some risk that multichannel could fail
if the server interpreted the field strictly.
Reviewed-By: Tom Talpey <tom@talpey.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sat, 8 May 2021 15:31:46 +0000 (08:31 -0700)]
Merge tag 'net-5.13-rc1' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
Masahiro Yamada [Wed, 5 May 2021 17:45:15 +0000 (02:45 +0900)]
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
<linux/kconfig.h> is included from all the kernel-space source files,
including C, assembly, linker scripts. It is intended to contain a
minimal set of macros to evaluate CONFIG options.
IF_ENABLED() is an intruder here because (x ? y : z) is C code, which
should not be included from assembly files or linker scripts.
Also, <linux/kconfig.h> is no longer self-contained because NULL is
defined in <linux/stddef.h>.
Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF()
takes the general boolean expression instead of a CONFIG option
so that it fits better in <linux/kernel.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Michael Ellerman [Sat, 8 May 2021 11:12:55 +0000 (21:12 +1000)]
Merge branch 'master' into next
Merge master back into next, this allows us to resolve some conflicts in
arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so
that they are in alphabetical order again.
Jakub Kicinski [Fri, 7 May 2021 23:10:12 +0000 (16:10 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Add SECMARK revision 1 to fix incorrect layout that prevents
from remove rule with this target, from Phil Sutter.
2) Fix pernet exit path spat in arptables, from Florian Westphal.
3) Missing rcu_read_unlock() for unknown nfnetlink callbacks,
reported by syzbot, from Eric Dumazet.
4) Missing check for skb_header_pointer() NULL pointer in
nfnetlink_osf.
5) Remove BUG_ON() after skb_header_pointer() from packet path
in several conntrack helper and the TCP tracker.
6) Fix memleak in the new object error path of userdata.
7) Avoid overflows in nft_hash_buckets(), reported by syzbot,
also from Eric.
8) Avoid overflows in 32bit arches, from Eric.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
netfilter: nfnetlink: add a missing rcu_read_unlock()
netfilter: arptables: use pernet ops struct during unregister
netfilter: xt_SECMARK: add new revision to fix structure layout
====================
Link: https://lore.kernel.org/r/20210507174739.1850-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 May 2021 23:04:22 +0000 (16:04 -0700)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue
Nguyen, Anthony L says:
====================
Intel Wired LAN Driver Updates 2021-05-07
This series contains updates to i40e driver only.
Magnus fixes XDP by adding and correcting checks that were caused by a
previous commit which introduced a new variable but did not account for
it in all paths.
Yunjian Wang adds a return in an error path to prevent reading a freed
pointer.
Jaroslaw forces link reset when changing FEC so that changes take
affect.
Mateusz fixes PHY types for 2.5G and 5G as there is a differentiation on
PHY identifiers based on operation.
Arkadiusz removes filtering of LLDP frames for software DCB as this is
preventing them from being properly transmitted.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
====================
Link: https://lore.kernel.org/r/20210507164151.2878147-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Ming Chen [Fri, 7 May 2021 12:38:43 +0000 (20:38 +0800)]
atm: firestream: Use fallthrough pseudo-keyword
Add pseudo-keyword macro fallthrough[1]
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20210507123843.10602-1-jj251510319013@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yannick Vignon [Thu, 6 May 2021 14:33:12 +0000 (16:33 +0200)]
net: stmmac: Do not enable RX FIFO overflow interrupts
The RX FIFO overflows when the system is not able to process all received
packets and they start accumulating (first in the DMA queue in memory,
then in the FIFO). An interrupt is then raised for each overflowing packet
and handled in stmmac_interrupt(). This is counter-productive, since it
brings the system (or more likely, one CPU core) to its knees to process
the FIFO overflow interrupts.
stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr
into the corresponding hardware register (according to the MAC spec, this
has the effect of restarting the MAC DMA). However, without freeing any rx
descriptors, the DMA stops right away, and another overflow interrupt is
raised as the FIFO overflows again. Since the DMA is already restarted at
the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO
overflow interrupts and the corresponding handling code has no side effect,
and eliminates the interrupt storm when the RX FIFO overflows.
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Fri, 7 May 2021 00:16:38 +0000 (17:16 -0700)]
mptcp: fix splat when closing unaccepted socket
If userspace exits before calling accept() on a listener that had at least
one new connection ready, we get:
Attempt to release TCP socket in state 8
This happens because the mptcp socket gets cloned when the TCP connection
is ready, but the socket is never exposed to userspace.
The client additionally sends a DATA_FIN, which brings connection into
CLOSE_WAIT state. This in turn prevents the orphan+state reset fixup
in mptcp_sock_destruct() from doing its job.
Fixes:
3721b9b64676b ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/185
Tested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210507001638.225468-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 7 May 2021 21:49:18 +0000 (14:49 -0700)]
Merge tag 'tag-chrome-platform-for-v5.13' of git://git./linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Changes around DP mode check, hard reset, tracking port change.
cros_ec misc:
- wilco_ec: Convert stream-like files from nonseekable to stream open
- cros_usbpd_notify: Listen to EC_HSOT_EVENT_USB_MUX host event
- fix format warning in cros_ec_typec"
* tag 'tag-chrome-platform-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_lpc: Use DEFINE_MUTEX() for mutex lock
platform/chrome: cros_usbpd_notify: Listen to EC_HOST_EVENT_USB_MUX host event
platform/chrome: cros_ec_typec: Add DP mode check
platform/chrome: cros_ec_typec: Handle hard reset
platform/chrome: cros_ec: Add Type C hard reset
platform/chrome: cros_ec_typec: Track port role
platform/chrome: cros_ec_typec: fix clang -Wformat warning
platform/chrome: cros_ec_typec: Check for device within remove function
platform/chrome: wilco_ec: convert stream-like files from nonseekable_open -> stream_open
Linus Torvalds [Fri, 7 May 2021 20:06:34 +0000 (13:06 -0700)]
Merge tag 'i3c/for-5.13' of git://git./linux/kernel/git/i3c/linux
Pull i3cupdates from Alexandre Belloni:
"Fix i3c_master_register error path"
* tag 'i3c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register"
dt-bindings: i3c: Fix silvaco,i3c-master-v1 compatible string
i3c: master: svc: remove redundant assignment to cmd->read_len
Linus Torvalds [Fri, 7 May 2021 19:11:05 +0000 (12:11 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
"A mix of fixes and clean-ups that turned up too late for the first
pull request:
- Restore terminal stack frame records. Their previous removal caused
traces which cross secondary_start_kernel to terminate one entry
too late, with a spurious "0" entry.
- Fix boot warning with pseudo-NMI due to the way we manipulate the
PMR register.
- ACPI fixes: avoid corruption of interrupt mappings on watchdog
probe failure (GTDT), prevent unregistering of GIC SGIs.
- Force SPARSEMEM_VMEMMAP as the only memory model, it saves with
having to test all the other combinations.
- Documentation fixes and updates: tagged address ABI exceptions on
brk/mmap/mremap(), event stream frequency, update booting
requirements on the configuration of traps"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: Update the stale comment
arm64: Fix the documented event stream frequency
arm64: entry: always set GIC_PRIO_PSR_I_SET during entry
arm64: Explicitly document boot requirements for SVE
arm64: Explicitly require that FPSIMD instructions do not trap
arm64: Relax booting requirements for configuration of traps
arm64: cpufeatures: use min and max
arm64: stacktrace: restore terminal records
arm64/vdso: Discard .note.gnu.property sections in vDSO
arm64: doc: Add brk/mmap/mremap() to the Tagged Address ABI Exceptions
psci: Remove unneeded semicolon
ACPI: irq: Prevent unregistering of GIC SGIs
ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
arm64: Show three registers per line
arm64: remove HAVE_DEBUG_BUGVERBOSE
arm64: alternative: simplify passing alt_region
arm64: Force SPARSEMEM_VMEMMAP as the only memory management model
arm64: vdso32: drop -no-integrated-as flag
Linus Torvalds [Fri, 7 May 2021 18:40:18 +0000 (11:40 -0700)]
Merge tag 'sound-fix-5.13-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few device-specific HD-audio and USB-audio fixes"
* tag 'sound-fix-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: generic: change the DAC ctl name for LO+SPK or LO+HP
ALSA: hda/realtek: Add fixup for HP OMEN laptop
ALSA: hda/realtek: Fix speaker amp on HP Envy AiO 32
ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UA
ALSA: usb-audio: Add dB range mapping for Sennheiser Communications Headset PC 8
ALSA: hda/realtek: ALC285 Thinkpad jack pin quirk is unreachable
Linus Torvalds [Fri, 7 May 2021 18:35:12 +0000 (11:35 -0700)]
Merge tag 'block-5.13-2021-05-07' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- dasd spelling fixes (Bhaskar)
- Limit bio max size on multi-page bvecs to the hardware limit, to
avoid overly large bio's (and hence latencies). Originally queued for
the merge window, but needed a fix and was dropped from the initial
pull (Changheun)
- NVMe pull request (Christoph):
- reset the bdev to ns head when failover (Daniel Wagner)
- remove unsupported command noise (Keith Busch)
- misc passthrough improvements (Kanchan Joshi)
- fix controller ioctl through ns_head (Minwoo Im)
- fix controller timeouts during reset (Tao Chiu)
- rnbd fixes/cleanups (Gioh, Md, Dima)
- Fix iov_iter re-expansion (yangerkun)
* tag 'block-5.13-2021-05-07' of git://git.kernel.dk/linux-block:
block: reexpand iov_iter after read/write
nvmet: remove unsupported command noise
nvme-multipath: reset bdev to ns head when failover
nvme-pci: fix controller reset hang when racing with nvme_timeout
nvme: move the fabrics queue ready check routines to core
nvme: avoid memset for passthrough requests
nvme: add nvme_get_ns helper
nvme: fix controller ioctl through ns_head
bio: limit bio max size
RDMA/rtrs: fix uninitialized symbol 'cnt'
s390: dasd: Mundane spelling fixes
block/rnbd: Remove all likely and unlikely
block/rnbd-clt: Check the return value of the function rtrs_clt_query
block/rnbd: Fix style issues
block/rnbd-clt: Change queue_depth type in rnbd_clt_session to size_t
Linus Torvalds [Fri, 7 May 2021 18:29:23 +0000 (11:29 -0700)]
Merge tag 'io_uring-5.13-2021-05-07' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Mostly fixes for merge window merged code. In detail:
- Error case memory leak fixes (Colin, Zqiang)
- Add the tools/io_uring/ to the list of maintained files (Lukas)
- Set of fixes for the modified buffer registration API (Pavel)
- Sanitize io thread setup on x86 (Stefan)
- Ensure we truncate transfer count for registered buffers (Thadeu)"
* tag 'io_uring-5.13-2021-05-07' of git://git.kernel.dk/linux-block:
x86/process: setup io_threads more like normal user space threads
MAINTAINERS: add io_uring tool to IO_URING
io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers
io_uring: Fix memory leak in io_sqe_buffers_register()
io_uring: Fix premature return from loop and memory leak
io_uring: fix unchecked error in switch_start()
io_uring: allow empty slots for reg buffers
io_uring: add more build check for uapi
io_uring: dont overlap internal and user req flags
io_uring: fix drain with rsrc CQEs
Linus Torvalds [Fri, 7 May 2021 18:23:41 +0000 (11:23 -0700)]
Merge tag 'nfs-for-5.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Add validation of the UDP retrans parameter to prevent shift
out-of-bounds
- Don't discard pNFS layout segments that are marked for return
Bugfixes:
- Fix a NULL dereference crash in xprt_complete_bc_request() when the
NFSv4.1 server misbehaves.
- Fix the handling of NFS READDIR cookie verifiers
- Sundry fixes to ensure attribute revalidation works correctly when
the server does not return post-op attributes.
- nfs4_bitmask_adjust() must not change the server global bitmasks
- Fix major timeout handling in the RPC code.
- NFSv4.2 fallocate() fixes.
- Fix the NFSv4.2 SEEK_HOLE/SEEK_DATA end-of-file handling
- Copy offload attribute revalidation fixes
- Fix an incorrect filehandle size check in the pNFS flexfiles driver
- Fix several RDMA transport setup/teardown races
- Fix several RDMA queue wrapping issues
- Fix a misplaced memory read barrier in sunrpc's call_decode()
Features:
- Micro optimisation of the TCP transmission queue using TCP_CORK
- statx() performance improvements by further splitting up the
tracking of invalid cached file metadata.
- Support the NFSv4.2 'change_attr_type' attribute and use it to
optimise handling of change attribute updates"
* tag 'nfs-for-5.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (85 commits)
xprtrdma: Fix a NULL dereference in frwr_unmap_sync()
sunrpc: Fix misplaced barrier in call_decode
NFSv4.2: Remove ifdef CONFIG_NFSD from NFSv4.2 client SSC code.
xprtrdma: Move fr_mr field to struct rpcrdma_mr
xprtrdma: Move the Work Request union to struct rpcrdma_mr
xprtrdma: Move fr_linv_done field to struct rpcrdma_mr
xprtrdma: Move cqe to struct rpcrdma_mr
xprtrdma: Move fr_cid to struct rpcrdma_mr
xprtrdma: Remove the RPC/RDMA QP event handler
xprtrdma: Don't display r_xprt memory addresses in tracepoints
xprtrdma: Add an rpcrdma_mr_completion_class
xprtrdma: Add tracepoints showing FastReg WRs and remote invalidation
xprtrdma: Avoid Send Queue wrapping
xprtrdma: Do not wake RPC consumer on a failed LocalInv
xprtrdma: Do not recycle MR after FastReg/LocalInv flushes
xprtrdma: Clarify use of barrier in frwr_wc_localinv_done()
xprtrdma: Rename frwr_release_mr()
xprtrdma: rpcrdma_mr_pop() already does list_del_init()
xprtrdma: Delete rpcrdma_recv_buffer_put()
xprtrdma: Fix cwnd update ordering
...
Linus Torvalds [Fri, 7 May 2021 18:18:52 +0000 (11:18 -0700)]
Merge tag '9p-for-5.13-rc1' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"An error handling fix and constification"
* tag '9p-for-5.13-rc1' of git://github.com/martinetd/linux:
fs: 9p: fix v9fs_file_open writeback fid error check
9p: Constify static struct v9fs_attr_group
Arkadiusz Kubalewski [Fri, 16 Apr 2021 21:43:57 +0000 (23:43 +0200)]
i40e: Remove LLDP frame filters
Remove filters from being setup in case of software DCB and allow the
LLDP frames to be properly transmitted to the wire.
It is not possible to transmit the LLDP frame out of the port, if they
are filtered by control VSI. This prohibits software LLDP agent
properly communicate its DCB capabilities to the neighbors.
Fixes:
4b208eaa8078 ("i40e: Add init and default config of software based DCB")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mateusz Palczewski [Tue, 13 Apr 2021 14:43:07 +0000 (14:43 +0000)]
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
Unlike other supported adapters, 2.5G and 5G use different
PHY type identifiers for reading/writing PHY settings
and for reading link status. This commit introduces
separate PHY identifiers for these two operation types.
Fixes:
2e45d3f4677a ("i40e: Add support for X710 B/P & SFP+ cards")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jaroslaw Gawin [Tue, 13 Apr 2021 14:19:40 +0000 (14:19 +0000)]
i40e: fix the restart auto-negotiation after FEC modified
When FEC mode was changed the link didn't know it because
the link was not reset and new parameters were not negotiated.
Set a flag 'I40E_AQ_PHY_ENABLE_ATOMIC_LINK' in 'abilities'
to restart the link and make it run with the new settings.
Fixes:
1d96340196f1 ("i40e: Add support FEC configuration for Fortville 25G")
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Yunjian Wang [Mon, 12 Apr 2021 14:41:18 +0000 (22:41 +0800)]
i40e: Fix use-after-free in i40e_client_subtask()
Currently the call to i40e_client_del_instance frees the object
pf->cinst, however pf->cinst->lan_info is being accessed after
the free. Fix this by adding the missing return.
Addresses-Coverity: ("Read from pointer after free")
Fixes:
7b0b1a6d0ac9 ("i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Magnus Karlsson [Mon, 26 Apr 2021 11:14:01 +0000 (13:14 +0200)]
i40e: fix broken XDP support
Commit
12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c") broke
XDP support in the i40e driver. That commit was fixing a sparse error
in the code by introducing a new variable xdp_res instead of
overloading this into the skb pointer. The problem is that the code
later uses the skb pointer in if statements and these where not
extended to also test for the new xdp_res variable. Fix this by adding
the correct tests for xdp_res in these places.
The skb pointer was used to store the result of the XDP program by
overloading the results in the error pointer
ERR_PTR(-result). Therefore, the allocation failure test that used to
only test for !skb now need to be extended to also consider !xdp_res.
i40e_cleanup_headers() had a check that based on the skb value being
an error pointer, i.e. a result from the XDP program != XDP_PASS, and
if so start to process a new packet immediately, instead of populating
skb fields and sending the skb to the stack. This check is not needed
anymore, since we have added an explicit test for xdp_res being set
and if so just do continue to pick the next packet from the NIC.
Fixes:
12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c")
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tom Lendacky [Thu, 6 May 2021 20:14:41 +0000 (15:14 -0500)]
KVM: SVM: Move GHCB unmapping to fix RCU warning
When an SEV-ES guest is running, the GHCB is unmapped as part of the
vCPU run support. However, kvm_vcpu_unmap() triggers an RCU dereference
warning with CONFIG_PROVE_LOCKING=y because the SRCU lock is released
before invoking the vCPU run support.
Move the GHCB unmapping into the prepare_guest_switch callback, which is
invoked while still holding the SRCU lock, eliminating the RCU dereference
warning.
Fixes:
291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <
b2f9b79d15166f2c3e4375c0d9bc3268b7696455.
1620332081.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 6 May 2021 23:15:42 +0000 (16:15 -0700)]
KVM: SVM: Invert user pointer casting in SEV {en,de}crypt helpers
Invert the user pointer params for SEV's helpers for encrypting and
decrypting guest memory so that they take a pointer and cast to an
unsigned long as necessary, as opposed to doing the opposite. Tagging a
non-pointer as __user is confusing and weird since a cast of some form
needs to occur to actually access the user data. This also fixes Sparse
warnings triggered by directly consuming the unsigned longs, which are
"noderef" due to the __user tag.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210506231542.2331138-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Thu, 6 May 2021 15:24:43 +0000 (15:24 +0000)]
kvm: Cap halt polling at kvm->max_halt_poll_ns
When growing halt-polling, there is no check that the poll time exceeds
the per-VM limit. It's possible for vcpu->halt_poll_ns to grow past
kvm->max_halt_poll_ns and stay there until a halt which takes longer
than kvm->halt_poll_ns.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Venkatesh Srinivas <venkateshs@chromium.org>
Message-Id: <
20210506152442.4010298-1-venkateshs@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl [Thu, 6 May 2021 14:03:52 +0000 (16:03 +0200)]
tools/kvm_stat: Fix documentation typo
Makes the dash in front of option '-z' disappear in the generated
man-page.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <
20210506140352.4178789-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Gleixner [Thu, 6 May 2021 13:21:37 +0000 (15:21 +0200)]
KVM: x86: Prevent deadlock against tk_core.seq
syzbot reported a possible deadlock in pvclock_gtod_notify():
CPU 0 CPU 1
write_seqcount_begin(&tk_core.seq);
pvclock_gtod_notify() spin_lock(&pool->lock);
queue_work(..., &pvclock_gtod_work) ktime_get()
spin_lock(&pool->lock); do {
seq = read_seqcount_begin(tk_core.seq)
...
} while (read_seqcount_retry(&tk_core.seq, seq);
While this is unlikely to happen, it's possible.
Delegate queue_work() to irq_work() which postpones it until the
tk_core.seq write held region is left and interrupts are reenabled.
Fixes:
16e8d74d2da9 ("KVM: x86: notifier for clocksource changes")
Reported-by: syzbot+6beae4000559d41d80f8@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Message-Id: <87h7jgm1zy.ffs@nanos.tec.linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Gleixner [Wed, 5 May 2021 21:48:17 +0000 (23:48 +0200)]
KVM: x86: Cancel pvclock_gtod_work on module removal
Nothing prevents the following:
pvclock_gtod_notify()
queue_work(system_long_wq, &pvclock_gtod_work);
...
remove_module(kvm);
...
work_queue_run()
pvclock_gtod_work() <- UAF
Ditto for any other operation on that workqueue list head which touches
pvclock_gtod_work after module removal.
Cancel the work in kvm_arch_exit() to prevent that.
Fixes:
16e8d74d2da9 ("KVM: x86: notifier for clocksource changes")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Message-Id: <87czu4onry.ffs@nanos.tec.linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 5 May 2021 20:42:21 +0000 (13:42 -0700)]
KVM: x86: Prevent KVM SVM from loading on kernels with 5-level paging
Disallow loading KVM SVM if 5-level paging is supported. In theory, NPT
for L1 should simply work, but there unknowns with respect to how the
guest's MAXPHYADDR will be handled by hardware.
Nested NPT is more problematic, as running an L1 VMM that is using
2-level page tables requires stacking single-entry PDP and PML4 tables in
KVM's NPT for L2, as there are no equivalent entries in L1's NPT to
shadow. Barring hardware magic, for 5-level paging, KVM would need stack
another layer to handle PML5.
Opportunistically rename the lm_root pointer, which is used for the
aforementioned stacking when shadowing 2-level L1 NPT, to pml4_root to
call out that it's specifically for PML4.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210505204221.1934471-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 6 May 2021 10:30:04 +0000 (06:30 -0400)]
KVM: X86: Expose bus lock debug exception to guest
Bus lock debug exception is an ability to notify the kernel by an #DB
trap after the instruction acquires a bus lock and is executed when
CPL>0. This allows the kernel to enforce user application throttling or
mitigations.
Existence of bus lock debug exception is enumerated via
CPUID.(EAX=7,ECX=0).ECX[24]. Software can enable these exceptions by
setting bit 2 of the MSR_IA32_DEBUGCTL. Expose the CPUID to guest and
emulate the MSR handling when guest enables it.
Support for this feature was originally developed by Xiaoyao Li and
Chenyi Qiang, but code has since changed enough that this patch has
nothing in common with theirs, except for this commit message.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <
20210202090433.13441-4-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Chenyi Qiang [Tue, 2 Feb 2021 09:04:32 +0000 (17:04 +0800)]
KVM: X86: Add support for the emulation of DR6_BUS_LOCK bit
Bus lock debug exception introduces a new bit DR6_BUS_LOCK (bit 11 of
DR6) to indicate that bus lock #DB exception is generated. The set/clear
of DR6_BUS_LOCK is similar to the DR6_RTM. The processor clears
DR6_BUS_LOCK when the exception is generated. For all other #DB, the
processor sets this bit to 1. Software #DB handler should set this bit
before returning to the interrupted task.
In VMM, to avoid breaking the CPUs without bus lock #DB exception
support, activate the DR6_BUS_LOCK conditionally in DR6_FIXED_1 bits.
When intercepting the #DB exception caused by bus locks, bit 11 of the
exit qualification is set to identify it. The VMM should emulate the
exception by clearing the bit 11 of the guest DR6.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <
20210202090433.13441-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nicholas Piggin [Wed, 5 May 2021 12:15:09 +0000 (22:15 +1000)]
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
Commit
b1c5356e873c ("KVM: PPC: Convert to the gfn-based MMU notifier
callbacks") causes unmap_gfn_range and age_gfn callbacks to only work
on the first gfn in the range. It also makes the aging callbacks call
into both radix and hash aging functions for radix guests. Fix this.
Add warnings for the single-gfn calls that have been converted to range
callbacks, in case they ever receieve ranges greater than 1.
Fixes:
b1c5356e873c ("KVM: PPC: Convert to the gfn-based MMU notifier callbacks")
Reported-by: Bharata B Rao <bharata@linux.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <
20210505121509.1470207-1-npiggin@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:34 +0000 (10:17 -0700)]
KVM: x86: Hide RDTSCP and RDPID if MSR_TSC_AUX probing failed
If probing MSR_TSC_AUX failed, hide RDTSCP and RDPID, and WARN if either
feature was reported as supported. In theory, such a scenario should
never happen as both Intel and AMD state that MSR_TSC_AUX is available if
RDTSCP or RDPID is supported. But, KVM injects #GP on MSR_TSC_AUX
accesses if probing failed, faults on WRMSR(MSR_TSC_AUX) may be fatal to
the guest (because they happen during early CPU bringup), and KVM itself
has effectively misreported RDPID support in the past.
Note, this also has the happy side effect of omitting MSR_TSC_AUX from
the list of MSRs that are exposed to userspace if probing the MSR fails.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:33 +0000 (10:17 -0700)]
KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to guest CPU model
Squish the Intel and AMD emulation of MSR_TSC_AUX together and tie it to
the guest CPU model instead of the host CPU behavior. While not strictly
necessary to avoid guest breakage, emulating cross-vendor "architecture"
will provide consistent behavior for the guest, e.g. WRMSR fault behavior
won't change if the vCPU is migrated to a host with divergent behavior.
Note, the "new" kvm_is_supported_user_return_msr() checks do not add new
functionality on either SVM or VMX. On SVM, the equivalent was
"tsc_aux_uret_slot < 0", and on VMX the check was buried in the
vmx_find_uret_msr() call at the find_uret_msr label.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:32 +0000 (10:17 -0700)]
KVM: x86: Move uret MSR slot management to common x86
Now that SVM and VMX both probe MSRs before "defining" user return slots
for them, consolidate the code for probe+define into common x86 and
eliminate the odd behavior of having the vendor code define the slot for
a given MSR.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:31 +0000 (10:17 -0700)]
KVM: x86: Export the number of uret MSRs to vendor modules
Split out and export the number of configured user return MSRs so that
VMX can iterate over the set of MSRs without having to do its own tracking.
Keep the list itself internal to x86 so that vendor code still has to go
through the "official" APIs to add/modify entries.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:30 +0000 (10:17 -0700)]
KVM: VMX: Disable loading of TSX_CTRL MSR the more conventional way
Tag TSX_CTRL as not needing to be loaded when RTM isn't supported in the
host. Crushing the write mask to '0' has the same effect, but requires
more mental gymnastics to understand.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:29 +0000 (10:17 -0700)]
KVM: VMX: Use common x86's uret MSR list as the one true list
Drop VMX's global list of user return MSRs now that VMX doesn't resort said
list to isolate "active" MSRs, i.e. now that VMX's list and x86's list have
the same MSRs in the same order.
In addition to eliminating the redundant list, this will also allow moving
more of the list management into common x86.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:28 +0000 (10:17 -0700)]
KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list
Explicitly flag a uret MSR as needing to be loaded into hardware instead of
resorting the list of "active" MSRs and tracking how many MSRs in total
need to be loaded. The only benefit to sorting the list is that the loop
to load MSRs during vmx_prepare_switch_to_guest() doesn't need to iterate
over all supported uret MRS, only those that are active. But that is a
pointless optimization, as the most common case, running a 64-bit guest,
will load the vast majority of MSRs. Not to mention that a single WRMSR is
far more expensive than iterating over the list.
Providing a stable list order obviates the need to track a given MSR's
"slot" in the per-CPU list of user return MSRs; all lists simply use the
same ordering. Future patches will take advantage of the stable order to
further simplify the related code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:27 +0000 (10:17 -0700)]
KVM: VMX: Configure list of user return MSRs at module init
Configure the list of user return MSRs that are actually supported at
module init instead of reprobing the list of possible MSRs every time a
vCPU is created. Curating the list on a per-vCPU basis is pointless; KVM
is completely hosed if the set of supported MSRs changes after module init,
or if the set of MSRs differs per physical PCU.
The per-vCPU lists also increase complexity (see __vmx_find_uret_msr()) and
creates corner cases that _should_ be impossible, but theoretically exist
in KVM, e.g. advertising RDTSCP to userspace without actually being able to
virtualize RDTSCP if probing MSR_TSC_AUX fails.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:26 +0000 (10:17 -0700)]
KVM: x86: Add support for RDPID without RDTSCP
Allow userspace to enable RDPID for a guest without also enabling RDTSCP.
Aside from checking for RDPID support in the obvious flows, VMX also needs
to set ENABLE_RDTSCP=1 when RDPID is exposed.
For the record, there is no known scenario where enabling RDPID without
RDTSCP is desirable. But, both AMD and Intel architectures allow for the
condition, i.e. this is purely to make KVM more architecturally accurate.
Fixes:
41cd02c6f7f6 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
Cc: stable@vger.kernel.org
Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:25 +0000 (10:17 -0700)]
KVM: SVM: Probe and load MSR_TSC_AUX regardless of RDTSCP support in host
Probe MSR_TSC_AUX whether or not RDTSCP is supported in the host, and
if probing succeeds, load the guest's MSR_TSC_AUX into hardware prior to
VMRUN. Because SVM doesn't support interception of RDPID, RDPID cannot
be disallowed in the guest (without resorting to binary translation).
Leaving the host's MSR_TSC_AUX in hardware would leak the host's value to
the guest if RDTSCP is not supported.
Note, there is also a kernel bug that prevents leaking the host's value.
The host kernel initializes MSR_TSC_AUX if and only if RDTSCP is
supported, even though the vDSO usage consumes MSR_TSC_AUX via RDPID.
I.e. if RDTSCP is not supported, there is no host value to leak. But,
if/when the host kernel bug is fixed, KVM would start leaking MSR_TSC_AUX
in the case where hardware supports RDPID but RDTSCP is unavailable for
whatever reason.
Probing MSR_TSC_AUX will also allow consolidating the probe and define
logic in common x86, and will make it simpler to condition the existence
of MSR_TSX_AUX (from the guest's perspective) on RDTSCP *or* RDPID.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:24 +0000 (10:17 -0700)]
KVM: VMX: Disable preemption when probing user return MSRs
Disable preemption when probing a user return MSR via RDSMR/WRMSR. If
the MSR holds a different value per logical CPU, the WRMSR could corrupt
the host's value if KVM is preempted between the RDMSR and WRMSR, and
then rescheduled on a different CPU.
Opportunistically land the helper in common x86, SVM will use the helper
in a future commit.
Fixes:
4be534102624 ("KVM: VMX: Initialize vmx->guest_msrs[] right after allocation")
Cc: stable@vger.kernel.org
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-6-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:23 +0000 (10:17 -0700)]
KVM: x86: Move RDPID emulation intercept to its own enum
Add a dedicated intercept enum for RDPID instead of piggybacking RDTSCP.
Unlike VMX's ENABLE_RDTSCP, RDPID is not bound to SVM's RDTSCP intercept.
Fixes:
fb6d4d340e05 ("KVM: x86: emulate RDPID")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-5-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:22 +0000 (10:17 -0700)]
KVM: SVM: Inject #UD on RDTSCP when it should be disabled in the guest
Intercept RDTSCP to inject #UD if RDTSC is disabled in the guest.
Note, SVM does not support intercepting RDPID. Unlike VMX's
ENABLE_RDTSCP control, RDTSCP interception does not apply to RDPID. This
is a benign virtualization hole as the host kernel (incorrectly) sets
MSR_TSC_AUX if RDTSCP is supported, and KVM loads the guest's MSR_TSC_AUX
into hardware if RDTSCP is supported in the host, i.e. KVM will not leak
the host's MSR_TSC_AUX to the guest.
But, when the kernel bug is fixed, KVM will start leaking the host's
MSR_TSC_AUX if RDPID is supported in hardware, but RDTSCP isn't available
for whatever reason. This leak will be remedied in a future commit.
Fixes:
46896c73c1a4 ("KVM: svm: add support for RDTSCP")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-4-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:21 +0000 (10:17 -0700)]
KVM: x86: Emulate RDPID only if RDTSCP is supported
Do not advertise emulation support for RDPID if RDTSCP is unsupported.
RDPID emulation subtly relies on MSR_TSC_AUX to exist in hardware, as
both vmx_get_msr() and svm_get_msr() will return an error if the MSR is
unsupported, i.e. ctxt->ops->get_msr() will fail and the emulator will
inject a #UD.
Note, RDPID emulation also relies on RDTSCP being enabled in the guest,
but this is a KVM bug and will eventually be fixed.
Fixes:
fb6d4d340e05 ("KVM: x86: emulate RDPID")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-3-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 4 May 2021 17:17:20 +0000 (10:17 -0700)]
KVM: VMX: Do not advertise RDPID if ENABLE_RDTSCP control is unsupported
Clear KVM's RDPID capability if the ENABLE_RDTSCP secondary exec control is
unsupported. Despite being enumerated in a separate CPUID flag, RDPID is
bundled under the same VMCS control as RDTSCP and will #UD in VMX non-root
if ENABLE_RDTSCP is not enabled.
Fixes:
41cd02c6f7f6 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210504171734.1434054-2-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 4 May 2021 14:39:36 +0000 (17:39 +0300)]
KVM: nSVM: remove a warning about vmcb01 VM exit reason
While in most cases, when returning to use the VMCB01,
the exit reason stored in it will be SVM_EXIT_VMRUN,
on first VM exit after a nested migration this field
can contain anything since the VM entry did happen
before the migration.
Remove this warning to avoid the false positive.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20210504143936.1644378-3-mlevitsk@redhat.com>
Fixes:
9a7de6ecc3ed ("KVM: nSVM: If VMRUN is single-stepped, queue the #DB intercept in nested_svm_vmexit()")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 4 May 2021 14:39:35 +0000 (17:39 +0300)]
KVM: nSVM: always restore the L1's GIF on migration
While usually the L1's GIF is set while L2 runs, and usually
migration nested state is loaded after a vCPU reset which
also sets L1's GIF to true, this is not guaranteed.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20210504143936.1644378-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Siddharth Chandrasekaran [Mon, 3 May 2021 12:21:11 +0000 (14:21 +0200)]
KVM: x86: Hoist input checks in kvm_add_msr_filter()
In ioctl KVM_X86_SET_MSR_FILTER, input from user space is validated
after a memdup_user(). For invalid inputs we'd memdup and then call
kfree unnecessarily. Hoist input validation to avoid kfree altogether.
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <
20210503122111.13775-1-sidcha@amazon.de>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bill Wendling [Fri, 11 Dec 2020 01:23:17 +0000 (17:23 -0800)]
selftests: kvm: remove reassignment of non-absolute variables
Clang's integrated assembler does not allow symbols with non-absolute
values to be reassigned. Modify the interrupt entry loop macro to be
compatible with IAS by using a label and an offset.
Cc: Jian Cai <caij2003@gmail.com>
Signed-off-by: Bill Wendling <morbo@google.com>
References: https://lore.kernel.org/lkml/
20200714233024.1789985-1-caij2003@gmail.com/
Message-Id: <
20201211012317.3722214-1-morbo@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Mon, 3 May 2021 15:08:52 +0000 (17:08 +0200)]
KVM: nVMX: Properly pad 'struct kvm_vmx_nested_state_hdr'
Eliminate the probably unwanted hole in 'struct kvm_vmx_nested_state_hdr':
Pre-patch:
struct kvm_vmx_nested_state_hdr {
__u64 vmxon_pa; /* 0 8 */
__u64 vmcs12_pa; /* 8 8 */
struct {
__u16 flags; /* 16 2 */
} smm; /* 16 2 */
/* XXX 2 bytes hole, try to pack */
__u32 flags; /* 20 4 */
__u64 preemption_timer_deadline; /* 24 8 */
};
Post-patch:
struct kvm_vmx_nested_state_hdr {
__u64 vmxon_pa; /* 0 8 */
__u64 vmcs12_pa; /* 8 8 */
struct {
__u16 flags; /* 16 2 */
} smm; /* 16 2 */
__u16 pad; /* 18 2 */
__u32 flags; /* 20 4 */
__u64 preemption_timer_deadline; /* 24 8 */
};
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20210503150854.1144255-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Wed, 5 May 2021 15:18:22 +0000 (17:18 +0200)]
KVM: selftests: evmcs_test: Check that VMCS12 is alway properly synced to eVMCS after restore
Add a test for the regression, introduced by commit
f2c7ef3ba955
("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit"). When
L2->L1 exit is forced immediately after restoring nested state,
KVM_REQ_GET_NESTED_STATE_PAGES request is cleared and VMCS12 changes
(e.g. fresh RIP) are not reflected to eVMCS. The consequent nested
vCPU run gets broken.
Utilize NMI injection to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20210505151823.1341678-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Wed, 5 May 2021 15:18:21 +0000 (17:18 +0200)]
KVM: selftests: evmcs_test: Check that VMLAUNCH with bogus EVMPTR is causing #UD
'run->exit_reason == KVM_EXIT_SHUTDOWN' check is not ideal as we may be
getting some unexpected exception. Directly check for #UD instead.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20210505151823.1341678-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Mon, 3 May 2021 15:08:51 +0000 (17:08 +0200)]
KVM: nVMX: Always make an attempt to map eVMCS after migration
When enlightened VMCS is in use and nested state is migrated with
vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs
page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr'
and we can't read it from VP assist page because userspace may decide
to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state
(and QEMU, for example, does exactly that). To make sure eVMCS is
mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES
request.
Commit
f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to
nested_vmx_vmexit() to make sure MSR permission bitmap is not switched
when an immediate exit from L2 to L1 happens right after migration (caused
by a pending event, for example). Unfortunately, in the exact same
situation we still need to have eVMCS mapped so
nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS.
As a band-aid, restore nested_get_evmcs_page() when clearing
KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far
from being ideal as we can't easily propagate possible failures and even if
we could, this is most likely already too late to do so. The whole
'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration
seems to be fragile as we diverge too much from the 'native' path when
vmptr loading happens on vmx_set_nested_state().
Fixes:
f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20210503150854.1144255-2-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / platform / kernel / linux-starfive.git / log