Jason Merrill [Wed, 11 May 2022 13:44:57 +0000 (09:44 -0400)]
c++: fix arm-eabi bootstrap [PR105567]
Since my r13-112, in the template we were changing 'return' to 'return this'
on cdtor_returns_this targets, and then getting confused by that when
instantiating. So only make that change at instantiation time.
PR bootstrap/105567
gcc/cp/ChangeLog:
* typeck.cc (check_return_expr): Don't mess with ctor return value
while parsing a template.
gcc/testsuite/ChangeLog:
* g++.dg/template/ctor10.C: New test.
Harald Anlauf [Tue, 10 May 2022 21:41:57 +0000 (23:41 +0200)]
Fortran: fix error recovery on invalid array section
gcc/fortran/ChangeLog:
PR fortran/105230
* expr.cc (find_array_section): Correct logic to avoid NULL
pointer dereference on invalid array section.
gcc/testsuite/ChangeLog:
PR fortran/105230
* gfortran.dg/pr105230.f90: New test.
Co-authored-by: Steven G. Kargl <kargl@gcc.gnu.org>
Segher Boessenkool [Tue, 10 May 2022 20:45:13 +0000 (20:45 +0000)]
rs6000: Remove <Fv>
The <Fv> mode iterator always expands to "wa".
2022-05-11 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/rs6000.md: Use wa instead of <Fv>.
Segher Boessenkool [Tue, 10 May 2022 20:35:56 +0000 (20:35 +0000)]
rs6000: Remove <Ff>
The <Ff> mode iterator can just use "d" always.
2022-05-11 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/rs6000.md: Use d instead of <Ff>.
Segher Boessenkool [Tue, 10 May 2022 18:47:31 +0000 (18:47 +0000)]
rs6000: Delete RS6000_CONSTRAINT_f
Constraint "f" is always exactly the same as constraint "d", so we do
not need RS6000_CONSTRAINT_f.
2022-05-11 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/constraints.md (register_constraint "f"): Use
RS6000_CONSTRAINT_d.
* config/rs6000/rs6000.cc (rs6000_debug_reg_global): Do not handle
RS6000_CONSTRAINT_f.
(rs6000_init_hard_regno_mode_ok): Ditto. Reorder and simplify a bit.
* config/rs6000/rs6000.h (r6000_reg_class_enum): Delete
RS6000_CONSTRAINT_d.
Richard Biener [Wed, 11 May 2022 12:53:37 +0000 (14:53 +0200)]
Use variadic template functions for the gimple_build forwarders
The following consolidates the forwarders to gimple_build with
UNKNOWN_LOCATION by using two variadic template functions. This
makes the code visually less disturbing and is in preparation
of adding more forwarders with different stmt insertion schemes.
2022-05-11 Richard Biener <rguenther@suse.de>
* gimple-fold.h (gimple_build): Use variadic template
functions for the gimple_build API forwarders without
location_t argument.
Siddhesh Poyarekar [Wed, 11 May 2022 13:43:09 +0000 (19:13 +0530)]
middle-end/70090: Register __bdos for sanitizers if necessary
The asan initializer registers __builtin_object_size for languages that
don't have it, e.g. Fortran. Register __builtin_dynamic_object_size too
(we need both because __builtin_dynamic_object_size computation may
involve generating __builtin_object_size as a fallback) so that
gfortran.dg/ubsan/bind-c-intent-out-2.f90 does not crash anymore.
gcc/ChangeLog:
PR middle-end/70090
* asan.cc (initialize_sanitizer_builtins): Register
__builtin_dynamic_object_size if necessary.
Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org>
Nathan Sidwell [Mon, 9 May 2022 11:47:14 +0000 (04:47 -0700)]
[c++] Add module attachment
This adds module attachment as a distinct flag to 'in module purview'.
A declaration may have neither or both (as before), but can also have
just the 'in [named-module] purview', which was previously not
representable.
This new state allows some cleanup of redeclarations (particularly the
builtins), which was a little warty. Some other internal APIs get
similarly clarified.
gcc/cp/
* cp-tree.h (DECL_MODULE_ATTACH_P): New.
(struct lang_decl_base): Add module_attach_p flag.
* decl.cc (duplicate_decls): Rework module redeclaration
checking.
* module.cc (trees_out::lang_decl_bools): Write attach flag.
(trees_in::lang_decl_bools): ... and read it back.
(trees_out::decl_value): Rework module attachment handling.
(trees_in::decl_value): Rename local var to reflect meaning.
(trees_in::key_mergeable): Likewise.
(get_originating_module): Use DECL_MODULE_ATTACH_P. No need
to special-case mangling.
(module_may_redeclare): Reimplement.
(set_originating_module): Deal with attachment.
* name-lookup.cc (maybe_record_mergeable_decl): Deal with
attachment.
(mergeable_namespace_slots): Likewise.
(do_nonmember_using_decl): Likewise.
* name-lookup.h (mergeable_namespace_slots): Adjust parm
meaning.
* ptree.cc (cxx_print_decl): Adjust purview & attach printing.
Richard Biener [Wed, 11 May 2022 11:34:37 +0000 (13:34 +0200)]
rtl-optimization/105559 - avoid quadratic behavior in delete_insn_and_edges
When the insn to delete is a debug insn there's no point in figuring
out whether it might be the last real insn and thus we have to purge
dead edges.
2022-05-11 Richard Biener <rguenther@suse.de>
PR rtl-optimization/105559
* cfgrtl.cc (delete_insn_and_edges): Only perform search to BB_END
for non-debug insns.
Richard Biener [Wed, 11 May 2022 09:53:53 +0000 (11:53 +0200)]
Implement some of fold_binary_op_with_conditional_arg in match.pd
The following allows (c != 0 ? 0 : 100) != 0 to be simplified as
c != 0 as fold_binary_op_with_conditional_arg would have done
via forwprop and GENERIC folding. Likewise it allows to combine
(a != 0) != 0 directly via match.pd instead of only via
forwprop and again fold_binary_op_with_conditional_arg.
The patterns do not fully implement all cases of
fold_binary_op_with_conditional_arg, some aspects like
"any of the operands simplify" cannot currently be expressed.
2022-05-11 Richard Biener <rguenther@suse.de>
* generic-match-head.cc: Include tree-eh.h.
* match.pd ((cond ...) cmp X): New simplification inspired
by fold_binary_op_with_conditional_arg.
(eq/ne (cmp ...) true/false): Likewise.
* gcc.dg/tree-ssa/pr61839_1.c: Adjust.
* gcc.dg/tree-ssa/vrp24.c: Likewise.
Thomas Schwinge [Wed, 6 Apr 2022 10:26:13 +0000 (12:26 +0200)]
libgomp: Remove unused '--with-hsa-runtime', '--with-hsa-runtime-include', '--with-hsa-runtime-lib'
With recent commit
2e309a4eff80e55b53d32d26926a2a94eabfea21 "libgomp testsuite:
Don't amend 'LD_LIBRARY_PATH' for system-provided HSA Runtime library",
and commit
d6adba307508c75f1ccb2121eb1a43c9ab1d4056 "libgomp GCN plugin:
Clean up unused references to system-provided HSA Runtime library", the last
uses of '--with-hsa-runtime' etc. are gone.
gcc/
* doc/install.texi: Don't document '--with-hsa-runtime',
'--with-hsa-runtime-include', '--with-hsa-runtime-lib'.
libgomp/
* plugin/configfrag.ac: Remove '--with-hsa-runtime',
'--with-hsa-runtime-include', '--with-hsa-runtime-lib' processing.
* Makefile.in: Regenerate.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
Thomas Schwinge [Wed, 6 Apr 2022 10:15:28 +0000 (12:15 +0200)]
libgomp GCN plugin: Clean up always-empty 'PLUGIN_GCN_CPPFLAGS', 'PLUGIN_GCN_LDFLAGS'
After recent commit
d6adba307508c75f1ccb2121eb1a43c9ab1d4056
"libgomp GCN plugin: Clean up unused references to system-provided HSA Runtime
library", these aren't set anymore.
libgomp/
* plugin/Makefrag.am (libgomp_plugin_gcn_la_CPPFLAGS): Don't
consider 'PLUGIN_GCN_CPPFLAGS'.
(libgomp_plugin_gcn_la_LDFLAGS): Don't consider
'PLUGIN_GCN_LDFLAGS'.
* plugin/configfrag.ac (PLUGIN_GCN_CPPFLAGS, PLUGIN_GCN_LDFLAGS):
Remove.
* Makefile.in: Regenerate.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
Thomas Schwinge [Wed, 6 Apr 2022 09:31:45 +0000 (11:31 +0200)]
libgomp GCN plugin: Clean up unused references to system-provided HSA Runtime library
This is only active if GCC is 'configure'd with '--with-hsa-runtime=[...]' or
'--with-hsa-runtime-include=[...]', '--with-hsa-runtime-lib=[...]' -- which
nobody really is doing, as far as I can tell.
Originally changed for the libgomp HSA plugin in
commit
b8d89b03db5f212919e4571671ebb4f5f8b1e19d (r242749)
"Remove build dependence on HSA run-time", and later propagated into the GCN
plugin, these are no longer built against system-provided HSA Runtime library.
Instead, unconditionally built against the GCC-shipped 'include/hsa*.h' header
files, and at run time does 'dlopen("libhsa-runtime64.so.1")'. It thus doesn't
make sense to consider references to system-provided HSA Runtime library during
libgomp GCN plugin build.
libgomp/
* plugin/configfrag.ac (HSA_RUNTIME_CPPFLAGS)
(HSA_RUNTIME_LDFLAGS): Remove.
* configure: Regenerate.
Thomas Schwinge [Wed, 6 Apr 2022 08:39:56 +0000 (10:39 +0200)]
libgomp testsuite: Don't amend 'LD_LIBRARY_PATH' for system-provided HSA Runtime library
This is only active if GCC is 'configure'd with '--with-hsa-runtime=[...]' or
'--with-hsa-runtime-lib=[...]' -- which nobody really is doing, as far as I can
tell.
'libgomp/testsuite/lib/libgomp.exp:libgomp_init' states:
# For build-tree testing, also consider the library paths used for builing.
# For installed testing, we assume all that to be provided in the sysroot.
if { $blddir != "" } {
[...]
global hsa_runtime_lib
if { $hsa_runtime_lib != "" } {
append always_ld_library_path ":$hsa_runtime_lib"
}
}
However, the libgomp GCN plugin is unconditionally built against the
GCC-shipped 'include/hsa*.h' header files, and at run time does
'dlopen("libhsa-runtime64.so.1")', so there is no system-provided HSA Runtime
library "used for builing". It thus doesn't make sense to amend
'LD_LIBRARY_PATH' for system-provided HSA Runtime library.
libgomp/
* testsuite/lib/libgomp.exp (libgomp_init): Don't
'append always_ld_library_path ":$hsa_runtime_lib"'.
* testsuite/libgomp-test-support.exp.in (hsa_runtime_lib): Don't set.
Martin Liska [Wed, 11 May 2022 11:21:26 +0000 (13:21 +0200)]
docs: document --with-zstd
PR other/105527
gcc/ChangeLog:
* doc/install.texi: Document the configure option --with-zstd.
Martin Liska [Wed, 15 Dec 2021 09:54:23 +0000 (10:54 +0100)]
i386: simplify cpu_feature handling
The patch removes unneeded loops for cpu_features2 and CONVERT_EXPR
that can be simplified with NOP_EXPR.
gcc/ChangeLog:
* common/config/i386/cpuinfo.h (has_cpu_feature): Directly
compute index in cpu_features2.
(set_cpu_feature): Likewise.
* config/i386/i386-builtins.cc (fold_builtin_cpu): Also remove
loop for cpu_features2 and use NOP_EXPRs.
Yannick Moy [Tue, 1 Feb 2022 11:33:54 +0000 (12:33 +0100)]
[Ada] Proof of 'Image support for unsigned integers
Prove System.Image_U, making the connection with the space available in
the string as computed with System.Width_U and the functions that
support the other direction of 'Value in System.Value_U.
The units that support 'Image cannot be marked Pure anymore, as they now
depend on non-pure units.
gcc/ada/
* libgnat/s-imaged.ads: Remove Pure.
* libgnat/s-imagef.ads: Remove Pure.
* libgnat/s-imager.ads: Remove Pure.
* libgnat/s-imageu.adb: Add ghost code.
* libgnat/s-imageu.ads: Add contracts.
* libgnat/s-imde128.ads: Remove Pure.
* libgnat/s-imde32.ads: Remove Pure.
* libgnat/s-imde64.ads: Remove Pure.
* libgnat/s-imfi128.ads: Remove Pure.
* libgnat/s-imfi32.ads: Remove Pure.
* libgnat/s-imfi64.ads: Remove Pure.
* libgnat/s-imgflt.ads: Remove Pure.
* libgnat/s-imglfl.ads: Remove Pure.
* libgnat/s-imgllf.ads: Remove Pure.
* libgnat/s-imglllu.ads: Instantiate with ghost subprograms.
* libgnat/s-imgllu.ads: Instantiate with ghost subprograms.
* libgnat/s-imgrea.ads: Remove Pure.
* libgnat/s-imguns.ads: Instantiate with ghost subprograms.
* libgnat/s-imguti.ads: Remove Pure.
* libgnat/s-valueu.adb (Prove_Iter_Scan_Based_Number_Ghost,
Prove_Scan_Only_Decimal_Ghost): New lemmas.
* libgnat/s-valueu.ads (Uns_Option): Do not make type ghost to
be able to use it as formal in instantiations.
(Only_Decimal_Ghost): New ghost query.
(Prove_Iter_Scan_Based_Number_Ghost,
Prove_Scan_Only_Decimal_Ghost): New lemmas.
* libgnat/s-widlllu.ads: Adapt to changes in Width_U.
* libgnat/s-widllu.ads: Adapt to changes in Width_U.
* libgnat/s-widthu.adb: Change generic function in generic
package in order to complete the postcondition. Tighten the
upper bound on the result by 1.
* libgnat/s-widthu.ads: Same.
* libgnat/s-widuns.ads: Adapt to changes in Width_U.
* gcc-interface/Make-lang.in: Add dependencies on a-nubinu,
a-numeri.ads and a-widuns.ads.
Piotr Trojanek [Fri, 4 Feb 2022 12:34:52 +0000 (13:34 +0100)]
[Ada] Sort Detect_Blocking alphabetically among names and pragmas
In GNAT User's Guide section about configuration pragmas the
Detect_Blocking has been recently moved to an alphabetic order. This
patch moves the its Name_Id and Pragma_Is in the source code to match
this order.
gcc/ada/
* snames.ads-tmpl (Detect_Blocking): Move after
Default_Storage_Pool.
Piotr Trojanek [Thu, 3 Feb 2022 23:22:41 +0000 (00:22 +0100)]
[Ada] Fix Compile_Time_(Error|Warning) as non-configuration pragmas
Uses of Compile_Time_Error and Compile_Time_Warning as configuration
pragmas were detected with a custom check in semantic analysis. Now they
are detected with an existing general check in parser.
gcc/ada/
* sem_prag.adb (Analyze_Pragma): Remove custom check for
Compile_Time_Error and Compile_Time_Warning pragmas.
* snames.ads-tmpl (Compile_Time_Error, Compile_Time_Warning):
Move beyond Last_Configuration_Pragma_Name.
Marc Poulhiès [Mon, 31 Jan 2022 14:54:41 +0000 (15:54 +0100)]
[Ada] Correctly reject record aggregate using brackets
Ada 2022 bracket syntax is only allowed for arrays and containers, not
records. This change correctly rejects record aggregates using brackets
along with few cases of brackets being used instead of parentheses.
gcc/ada/
* libgnat/a-direct.adb (Start_Search_Internal): Use parentheses
for record aggregate.
* libgnat/a-stbubo.adb (Get_UTF_8): Likewise.
* libgnat/a-stbuun.adb (Get_UTF_8): Likewise.
* libgnat/a-stzbou.ads (Null_Bounded_Wide_Wide_String):
Likewise.
* libgnat/a-swmwco.ads (Lower_Case_Mapping, Basic_Mapping):
Likewise.
* libgnat/a-szmzco.ads (Lower_Case_Mapping, Basic_Mapping):
Likewise.
* libgnat/s-statxd.adb (Fields): Likewise.
* libgnat/s-stausa.adb (Initialize): Likewise.
* sem_aggr.adb (Resolve_Record_Aggregate): Reject aggregates
using brackets.
Piotr Trojanek [Fri, 4 Feb 2022 08:47:27 +0000 (09:47 +0100)]
[Ada] Fix unbalanced paren in documentation marker for GNAT Studio
Unbalanced parens can be found when editing in emacs using the
"check-parens" command. Offending occurrences must be examined manually,
because few of them are intentional.
Minor cleanup of typos in documentation.
gcc/ada/
* doc/gnat_rm/implementation_defined_pragmas.rst,
doc/gnat_rm/implementation_of_specific_ada_features.rst,
doc/gnat_rm/representation_clauses_and_pragmas.rst,
doc/gnat_rm/the_gnat_library.rst,
doc/gnat_rm/the_implementation_of_standard_i_o.rst,
doc/gnat_ugn/building_executable_programs_with_gnat.rst,
doc/gnat_ugn/gnat_and_program_execution.rst,
doc/gnat_ugn/platform_specific_information.rst: Fix unbalanced
parentheses and brackets.
* sem_prag.adb (pragma Obsolescent): Likewise.
* gnat_rm.texi, gnat_ugn.texi: Regenerate.
Marc Poulhiès [Tue, 1 Feb 2022 11:20:51 +0000 (12:20 +0100)]
[Ada] New No_Local_Tagged_Types restriction
Add new configuration restriction No_Local_Tagged_Types. This new
restriction ensures at compile time that all tagged types are only
declared at the library level.
gcc/ada/
* libgnat/s-rident.ads (Restriction_Id): Add
No_Local_Tagged_Types, update comment for adding new GNAT
specific restriction.
* restrict.ads (Implementation_Restriction): Add
No_Local_Tagged_Types.
* sem_ch3.adb (Analyze_Full_Type_Declaration): Add check for
tagged type at library level.
* doc/gnat_rm/standard_and_implementation_defined_restrictions.rst:
Add No_Local_Tagged_Types description.
* gnat_rm.texi: Regenerate.
Eric Botcazou [Wed, 2 Feb 2022 20:04:18 +0000 (21:04 +0100)]
[Ada] Fix spurious ambiguity for if_expression containing operator
It comes from a discrepancy in the analysis of binary operators, between
the predefined ones for which we register an interpretation with the base
type and the user-defined ones for which we register an interpretation
with the subtype directly.
This is harmless in almost all cases because the two interpretations do not
differ by this type property only, but is problematic when the operation is
the dependent expression of a conditional expression, because it causes two
interpretations of the conditional expression to be registered, which this
time differ by this type property only, thus making them impossible to be
disambiguated later.
gcc/ada/
* sem_ch4.adb (Analyze_User_Defined_Binary_Op): Use the base type
in the interpretation of the operator.
Piotr Trojanek [Thu, 3 Feb 2022 20:28:44 +0000 (21:28 +0100)]
[Ada] Fix style of body header boxes
gcc/ada/
* sem_case.adb (Free_Value_Sets): Fix style in body header box.
* sem_ch12.adb (Build_Subprogram_Wrappers): Likewise.
* sem_util.adb (Statically_Denotes_Entity): Likewise.
Etienne Servais [Wed, 2 Feb 2022 14:18:29 +0000 (15:18 +0100)]
[Ada] Do not create useless itype in Constrain_Access
In the case of a constrained access definition for a record component we
are calling create_itype twice the former not being updated. This leads
to a malformed node that crashes -gnatG when predicates are activated.
Instead of creating a default Itype for Desig_Subtype, create it with
the correct scope in each case.
gcc/ada/
* sem_ch3.adb (Constrain_Access): Call Desig_Subtype in each if
branch to avoid calling it twice.
Piotr Trojanek [Wed, 2 Feb 2022 16:19:59 +0000 (17:19 +0100)]
[Ada] Detect infinite loops with operators in exit conditions
To warn about infinite loops we detect variables referenced in loop exit
conditions. We handle references within boolean operators, i.e.
comparison and negation, which are likely to appear at the top level of
the condition (e.g. "X > 0"). However, we can easily handle all
operators, because they are likely to appear inside the condition (e.g.
"abs (X) > 0.0").
Cleanup related to a new restriction No_Uninitialized_Local_Scalars.
gcc/ada/
* sem_warn.adb (Find_Var): Detect all operators; replace
"condition" to "expression" in comments, because when this
routine is called recursively it no longer examines the
condition.
(Is_Suspicious_Function_Name): Reduce scope of a local variable
to avoid shadowing with a parameter of a nested
Substring_Present function.
Yannick Moy [Wed, 2 Feb 2022 11:52:36 +0000 (12:52 +0100)]
[Ada] Adapt proof of System.Arith_Double after update of Z3
Update to version 4.8.14 of prover Z3 requires minor adjustments of the
ghost code to add necessary intermediate assertions that drive the
automatic proof.
gcc/ada/
* libgnat/s-aridou.adb (Double_Divide, Scaled_Divide): Add
intermediate assertions.
Piotr Trojanek [Tue, 1 Feb 2022 14:21:01 +0000 (15:21 +0100)]
[Ada] Update categorization of implementation restrictions
Some of the restrictions were initially implemented as specific to GNAT,
but now they are part of Ada; likewise, some of recently added
restrictions were considered to be part of Ada, but are not yet in the
standard. This patch updates their categorization based on Ada 202x
Draft 32.
Only a No_Implementation_Restrictions restriction, which is specific to
GNAT, is affected.
Cleanup related to a new restriction No_Uninitialized_Local_Scalars.
gcc/ada/
* libgnat/s-rident.ads (Implementation_Restriction): Remove
No_Dynamic_Attachment, No_Implementation_Attributes,
No_Implementation_Pragmas, No_Local_Protected_Objects,
No_Protected_Type_Allocators, No_Relative_Delay,
No_Requeue_Statements, No_Select_Statements,
No_Task_Termination, Pure_Barriers and Simple_Barriers; add
No_Dynamic_Sized_Objects,
No_Implicit_Protected_Object_Allocations,
No_Implicit_Task_Allocations, No_Task_At_Interrupt_Priority and
Static_Dispatch_Tables; sort alphabetically.
* restrict.ads (Restriction_Id): Change Pure_Barriers and
No_Task_Termination from GNAT to Ada restrictions.
Piotr Trojanek [Tue, 1 Feb 2022 10:40:23 +0000 (11:40 +0100)]
[Ada] Fix "S p e c" and "B o d y" file headers
Fix Spec/Body headers in .adb/.ads files, respectively; all violations
detected with grep and manually filtered because of .tmpl files.
gcc/ada/
* exp_atag.adb, lib-util.ads, libgnat/g-decstr.adb,
libgnat/g-exptty.adb, libgnat/g-socpol.adb,
libgnat/s-strhas.adb: Fix headers.
Joao Azevedo [Mon, 31 Jan 2022 12:02:42 +0000 (12:02 +0000)]
[Ada] Add SUSE 32bit dependency
On SUSE 15, glibc-locale-base-32bit is needed to run 32bit versions
of Libadalang tools.
gcc/ada/
* doc/gnat_ugn/platform_specific_information.rst: Add
glibc-locale-base-32bit as a dependency in SUSE distributions.
* gnat_ugn.texi: Regenerate.
Piotr Trojanek [Sun, 30 Jan 2022 17:41:16 +0000 (18:41 +0100)]
[Ada] Fix formatting glitches in GNAT User's Guide
Only enhancement of formatting.
gcc/ada/
* doc/gnat_ugn/gnat_and_program_execution.rst,
doc/gnat_ugn/gnat_utility_programs.rst,
doc/gnat_ugn/inline_assembler.rst: Fix typos and formatting
glitches.
* gnat_ugn.texi: Regenerate.
Piotr Trojanek [Sun, 30 Jan 2022 17:39:39 +0000 (18:39 +0100)]
[Ada] Use pygments for Ada code examples of elaboration control
Only enhancement of formatting.
gcc/ada/
* doc/gnat_ugn/elaboration_order_handling_in_gnat.rst: Change
blocks from plain code to Ada.
Gary Dismukes [Fri, 28 Jan 2022 01:17:03 +0000 (20:17 -0500)]
[Ada] Excess finalization on assignment with target name symbol
In cases where the Ada 2022 feature of target name symbols (@) is used
and the evaluation of the name is side-effect free, the compiler creates
a temporary object to hold the value of the target object for use as
the value of "@" symbols in the right-hand side expression. In the case
where the target's type is controlled, or has controlled subcomponents,
this can result in extra finalization calls (for the temporary object).
The correction is to bypass the use of a temp and fall back on the more
general approach of creating and calling a procedure with an in-out
parameter for performing the assignment.
gcc/ada/
* exp_ch5.adb (Expand_Assign_With_Target_Names): Bypass the temp
object approach in the case where the type of the LHS is
controlled or has controlled subcomponents (Needs_Finalization
is True), and use the procedure approach instead.
Bob Duff [Fri, 28 Jan 2022 19:40:27 +0000 (14:40 -0500)]
[Ada] fix crash on Secondary_Stack_Size with discriminant
This patch fixes a crash caused by specifying the Secondary_Stack_Size
aspect of a task type as the value of a discriminant of the task type,
and then declaring a record component whose type is the task type,
constrained to a discriminant of the record.
gcc/ada/
* sem_ch3.adb (Get_Discr_Value): Copy the result. Otherwise, the
"tree" can be malformed (a DAG, not a tree) because
Get_Discr_Value could be returning some subtree already attached
to the tree.
Piotr Trojanek [Fri, 28 Jan 2022 17:12:18 +0000 (18:12 +0100)]
[Ada] Reset Reachable field when mutating label into loop entity
An entity flag Reachable now only applies to E_Label entities and needs
to be explicitly reset when mutating labels into loop entities. Only
needed to prevent cascaded errors when compiling a malicious ACATS test
with -gnatq (try semantics, even if parse errors).
Cleanup related to detection of uninitialized scalars with GOTO
statements.
gcc/ada/
* sem_ch5.adb (Analyze_Statements): Only clear Reachable flag on
proper label entities.
Piotr Trojanek [Fri, 28 Jan 2022 15:02:43 +0000 (16:02 +0100)]
[Ada] Fix layout of tables in PDF version of GNAT RM
Tables with small left columns and large right columns had colliding
text in the PDF version of GNAT RM.
Spotted while adding description of pragma Ada_2022.
gcc/ada/
* doc/gnat_rm/implementation_defined_characteristics.rst: Add
tabularcolums directive, as explained in documentation of Sphinx
and tabular LaTeX package.
Piotr Trojanek [Fri, 28 Jan 2022 14:27:47 +0000 (15:27 +0100)]
[Ada] Fix layout in description of aspects and pragmas
Remove extra whitespace in examples of pragmas and aspects.
Spotted while adding description of pragma Ada_2022.
gcc/ada/
* doc/gnat_rm/implementation_defined_aspects.rst,
doc/gnat_rm/implementation_defined_pragmas.rst: Remove extra
whitespace.
* gnat_rm.texi: Regenerate.
Piotr Trojanek [Fri, 28 Jan 2022 14:02:11 +0000 (15:02 +0100)]
[Ada] Fix markup in description of implementation-defined characteristics
Fix formatting of description lists, i.e. continuation lines are now
indented like their preceding lines.
Spotted while adding description of pragma Ada_2022.
gcc/ada/
* doc/gnat_rm/implementation_defined_characteristics.rst: Remove
extra indent in continuation lines; indent both descriptions of
Max_Picture_Length.
* gnat_rm.texi: Regenerate.
Piotr Trojanek [Fri, 28 Jan 2022 13:16:09 +0000 (14:16 +0100)]
[Ada] Fix markup in description of pragma Eliminate
Fix formatting of a nested bullet lists. Spotted while adding
description of pragma Ada_2022.
gcc/ada/
* doc/gnat_rm/implementation_defined_pragmas.rst (Pragma
Eliminate): Fix markup.
* gnat_rm.texi: Regenerate.
Johannes Kliemann [Fri, 28 Jan 2022 14:54:21 +0000 (14:54 +0000)]
[Ada] Suppress warning in g-sthcso for non-unix platforms
gcc/ada/
* libgnat/g-sthcso.adb: Suppress warning about unneeded use type
clause.
Piotr Trojanek [Fri, 28 Jan 2022 09:24:04 +0000 (10:24 +0100)]
[Ada] Add guard for making only legal labels unreachable
An entity flag Reachable now only applies to E_Label entities. We had an
appropriate guard for setting this flag, but not for clearing.
Cleanup related to detection of uninitialized scalars with GOTO
statements.
gcc/ada/
* sem_ch5.adb (Analyze_Statements): Only clear Reachable flag on
proper label entities.
Piotr Trojanek [Thu, 27 Jan 2022 21:03:58 +0000 (22:03 +0100)]
[Ada] Document pragma Ada_2022
Pragma Ada_2022 is similar to existing pragma Ada_2012 and similarly
deserves to be documented.
gcc/ada/
* doc/gnat_rm/implementation_defined_pragmas.rst (Pragma
Ada_2022): Copy description from pragma Ada 2012 and adapt.
* doc/gnat_ugn/the_gnat_compilation_model.rst (Configuration
Pragmas): List pragma Ada 2022.
* gnat_rm.texi, gnat_ugn.texi: Regenerate.
Steve Baird [Tue, 25 Jan 2022 00:46:58 +0000 (16:46 -0800)]
[Ada] Properly reject unsupported address specifications
In the case of an object declaration with an indefinite nominal subtype
(roughly speaking, that's an object that takes its bounds,
discriminants, and/or tag from its explicit initial value), GNAT does
not support address specifications unless the size of the object is
known at compile time. In some cases, such unsupported address
specifications were not properly rejected. This could lead to either an
internal error during compilation or (in the class-wide case) to a
warning accompanied by raising Program_Error at run time.
gcc/ada/
* sem_ch13.adb (Analyze_Attribute_Definition_Clause): Replace
the existing check for an address specification for an object of
a class-wide type with a more general check which rejects either
the class-wide case or the case where the FE would (if the
address specification were accepted) build a malformed
tree (specifically, an object renaming declaration with a
specified address). In the case where the check fails, reject
the construct at compile time instead of generating an
unconditional raise of Program_Error.
* doc/gnat_rm/representation_clauses_and_pragmas.rst: Update
documentation to reflect these changes.
* gnat_rm.texi: Regenerate.
Piotr Trojanek [Thu, 27 Jan 2022 11:59:58 +0000 (12:59 +0100)]
[Ada] Move Reachable flag to E_Label entities
An entity flag Reachable is described as "defined in labels". It is only
read and written for entities of kind E_Label (the code has necessary
guards for that). There no need for this flag to be specified for all
entities in the generated AST.
Cleanup related to detection of uninitialized scalars with GOTO
statements.
gcc/ada/
* gen_il-gen-gen_entities.adb (Reachable): Move from
Root_Entity_Type to E_Label.
Alexandre Oliva [Wed, 29 Dec 2021 07:10:45 +0000 (04:10 -0300)]
[Ada] Set_Is_Known_Valid only if Safe_To_Capture_Value
Library-level variables with initializers could have Is_Known_Valid
set when analyzing their definition, and the flag would only be
cleared when analyzing a statement that assigned to them. Procedures
and functions analyzed before the flag got cleared could skip validity
checking for the corresponding variable. This patch fixes this
problem: we no longer set Is_Known_Valid when analyzing initializers
of library-level variables,and use the same Safe_To_Capture_Value
predicate that prevents assignments from recording known-valid states.
This causes any variable with an initialization value, that would have
had its initializer value used as its known constant value if the use
is analyzed before any assignment to the variable, to no longer be
regarded as holding a constant value. Some might turn out to have a
constant value, after all, but we don't know that yet: we can only
tell after analyzing every subprogram that could possibly assign to
it. At the points where Safe_To_Capture_Value calls are introduced,
Never_Set_In_Source does not yet hold its final value.
gcc/ada/
* exp_ch3.adb (Expand_N_Object_Declaration): Guard
Set_Is_Known_Valid with Safe_To_Capture_Value.
Bob Duff [Thu, 27 Jan 2022 16:13:41 +0000 (11:13 -0500)]
[Ada] Avoid crash for -gnatR -gnatc
If the -gnatR -gnatc are both given, then the compiler crashes. This
patch fixes that, and avoids printing the uncomputed sizes and
alignments that were causing the crash. (Previous versions of the
compiler printed incorrect values in such cases.)
gcc/ada/
* repinfo.adb (List_Object_Info): Do not try to print values
that have not been computed (and so are No_Uint).
(Rep_Not_Constant): Reverse sense and change name to
Compile_Time_Known_Rep. This makes the code at call sites a
little more readable. Simplify code to a single return
statement.
Richard Biener [Wed, 11 May 2022 08:47:34 +0000 (10:47 +0200)]
bootstrap/105551 - restore nvptx build
The following makes sure to disable var-tracking if only
dwarf2-line debuginfo is present.
2022-05-11 Richard Biener <rguenther@suse.de>
PR bootstrap/105551
* opts.cc (finish_options): Also disable var-tracking if
!DWARF2_DEBUGGING_INFO.
liuhongt [Tue, 29 Mar 2022 01:21:21 +0000 (09:21 +0800)]
Optimize movzwl + vmovd/vmovq to vmovw.
Similarly optimize movl + vmovq to vmovd.
gcc/ChangeLog:
PR target/104915
* config/i386/sse.md (*vec_set<mode>_0_zero_extendhi): New
pre_reload define_insn_and_split.
(*vec_setv2di_0_zero_extendhi_1): Ditto.
(*vec_set<mode>_0_zero_extendsi): Ditto.
(*vec_setv2di_0_zero_extendsi_1): Ditto.
(ssewvecmode): New mode attr.
(ssewvecmodelower): Ditto.
(ssepackmodelower): Ditto.
gcc/testsuite/ChangeLog:
* gcc.target/i386/pr104915-vmovd.c: New test.
* gcc.target/i386/pr104915-vmovw.c: New test.
Kewen Lin [Wed, 11 May 2022 06:18:30 +0000 (01:18 -0500)]
rs6000: Fix constraint v with rs6000_constraints[RS6000_CONSTRAINT_v]
Currently we hardcode ALTIVEC_REGS for register constraint v and
RS6000_CONSTRAINT_v looks confusing, this is to fix it with
rs6000_constraints[RS6000_CONSTRAINT_v] to align with some other
existing register constraints with RS6000_CONSTRAINT_*.
gcc/ChangeLog:
* config/rs6000/constraints.md (register constraint v): Use
rs6000_constraints[RS6000_CONSTRAINT_v] instead of ALTIVEC_REGS.
Martin Liska [Tue, 26 Apr 2022 09:41:09 +0000 (11:41 +0200)]
opts: do not allow Separate+Joined ending with =
Do not allow strange option format:
-msmall-data-limit= 11.
For -output-pch we need to use Separate syntax as lang spec
rules automatically append a space.
PR target/105355
gcc/ChangeLog:
* config/riscv/riscv.opt: Remove Separate from
-msmall-data-limit=.
* optc-gen.awk: Report error for the described situation.
* gcc.cc: Use Separate syntax.
* opts.cc (gen_command_line_string): Change option name.
gcc/c-family/ChangeLog:
* c-opts.cc (c_common_handle_option): Change option name.
* c.opt: Remove Joined and use Separate option.
gcc/cp/ChangeLog:
* lang-specs.h: Use Separate syntax.
gcc/objc/ChangeLog:
* lang-specs.h: Use Separate syntax.
gcc/objcp/ChangeLog:
* lang-specs.h: Use Separate syntax.
Kewen Lin [Wed, 11 May 2022 03:18:24 +0000 (22:18 -0500)]
MAINTAINERS: Remove myself from DCO section
ChangeLog:
* MAINTAINERS: Remove myself from DCO section.
Haochen Gui [Mon, 9 May 2022 09:34:23 +0000 (17:34 +0800)]
This patch skips constant folding for fmin/max when either argument is sNaN. According to C standard, fmin(sNaN, sNaN)= qNaN, fmin(sNaN, NaN) = qNaN.
gcc/
PR target/105414
* match.pd (minmax): Skip constant folding for fmin/fmax when both
arguments are sNaN or one is sNaN and another is NaN.
gcc/testsuite/
PR target/105414
* gcc.dg/pr105414.c: New.
GCC Administrator [Wed, 11 May 2022 00:16:40 +0000 (00:16 +0000)]
Daily bump.
Joseph Myers [Tue, 10 May 2022 20:22:22 +0000 (20:22 +0000)]
Update gcc hr.po
* hr.po: Update.
Harald Anlauf [Mon, 9 May 2022 20:14:21 +0000 (22:14 +0200)]
Fortran: check TEAM arguments to coarray intrinsics
TEAM arguments to coarray intrinsics must be scalar expressions of type
TEAM_TYPE of intrinsic module ISO_FORTRAN_ENV.
gcc/fortran/ChangeLog:
PR fortran/105526
* resolve.cc (check_team): New.
(gfc_resolve_code): Add checks for arguments to coarray intrinsics
FORM TEAM, CHANGE TEAM, and SYNC TEAM.
gcc/testsuite/ChangeLog:
PR fortran/105526
* gfortran.dg/coarray_50.f90: New test.
H.J. Lu [Fri, 6 May 2022 17:55:53 +0000 (10:55 -0700)]
x86: Add .note.GNU-stack section only for Linux
Add .note.GNU-stack section only for Linux since it may not be supported
on non-Linux OSes. __ELF__ isn't checked since these tests can only run
on Linux/x86 ELF systems.
PR target/105472
* gcc.target/i386/iamcu/asm-support.S: Add .note.GNU-stack section
only for Linux.
* gcc.target/x86_64/abi/asm-support.S: Likewise.
* gcc.target/x86_64/abi/avx/asm-support.S: Likewise.
* gcc.target/x86_64/abi/avx512f/asm-support.S: Likewise.
* gcc.target/x86_64/abi/avx512fp16/asm-support.S: Likewise.
* gcc.target/x86_64/abi/avx512fp16/m256h/asm-support.S: Likewise.
* gcc.target/x86_64/abi/avx512fp16/m512h/asm-support.S: Likewise.
* gcc.target/x86_64/abi/ms-sysv/do-test.S: Likewise.
Jakub Jelinek [Tue, 10 May 2022 16:34:08 +0000 (18:34 +0200)]
isel: Fix up gimple_expand_vec_set_expr [PR105528]
The following testcase ICEs (and only without -g), because we don't replace
one VEC_COND_EXPR with .VCOND* call.
We don't do that because gimple_expand_vec_set_expr adds some stmts before
*gsi and then uses gsi_remove to remove it. gsi_remove moves the iterator
to the next stmt and in the caller we then do gsi_next before looking at
another stmt, which means we can skip processing of one stmt, which in this
case happened to be a VEC_COND_EXPR but with -g is some debug stmt in
between. As we always emit some stmts before it, it is easy to update the
iterator to the last stmt emitted there, so that caller continues really
with the next stmt.
2022-05-10 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/105528
* gimple-isel.cc (gimple_expand_vec_set_expr): After gsi_remove
set *gsi to gsi_for_stmt (ass_stmt). Fix up function comment.
* gcc.dg/pr105528.c: New test.
Segher Boessenkool [Tue, 10 May 2022 16:00:05 +0000 (16:00 +0000)]
doc: Fix mode iterator example
The example missed the mode condition in the replacement text.
2022-05-10 Segher Boessenkool <segher@kernel.crashing.org>
* doc/md.texi (Defining Mode Iterators): Correct example replacement
text.
Patrick Palka [Tue, 10 May 2022 15:52:29 +0000 (11:52 -0400)]
c++: Remove SET_PACK_EXPANSION_PATTERN / SET_ARGUMENT_PACK_ARGS
Unlike in C, in C++ the conditional operator yields an lvalue if both
branches are lvalues, so these setter macros are unnecessary; we can
just assign to PACK_EXPANSION_PATTERN and ARGUMENT_PACK_ARGS directly.
gcc/cp/ChangeLog:
* coroutines.cc (instantiate_coro_traits): Adjust accordingly.
* cp-tree.def: Remove mention of SET_PACK_EXPANSION_PATTERN.
* cp-tree.h (SET_PACK_EXPANSION_PATTERN): Remove.
(SET_ARGUMENT_PACK_ARGS): Remove.
* module.cc (trees_in::tree_node): Adjust accordingly.
* parser.cc (make_char_string_pack): Likewise.
(make_string_pack): Likewise.
* pt.cc (make_pack_expansion): Likewise.
(template_parm_to_arg): Likewise.
(coerce_template_parameter_pack): Likewise.
(extract_fnparm_pack): Likewise.
(extract_locals_r): Likewise.
(make_argument_pack): Likewise.
(tsubst_argument_pack): Likewise.
(lookup_init_capture_pack): Likewise.
(type_unification_real): Likewise.
(unify_pack_expansion): Likewise.
(tsubst_initializer_list): Likewise.
Patrick Palka [Tue, 10 May 2022 15:52:21 +0000 (11:52 -0400)]
c++: Harden *_PACK_EXPANSION and *_ARGUMENT_PACK macros
This makes the accessor macros for TYPE_/EXPR_PACK_EXPANSION
and TYPE_/NONTYPE_ARGUMENT_PACK check the tree code of the argument.
gcc/cp/ChangeLog:
* cp-tree.h (PACK_EXPANSION_CHECK): Define.
(PACK_EXPANSION_PATTERN): Use PACK_EXPANSION_CHECK.
(SET_PACK_EXPANSION_PATTERN): Likewise.
(PACK_EXPANSION_PARAMETER_PACKS): Likewise.
(PACK_EXPANSION_EXTRA_ARGS): Likewise.
(PACK_EXPANSION_LOCAL_P): Likewise.
(PACK_EXPANSION_SIZEOF_P): Likewise.
(PACK_EXPANSION_AUTO_P): Likewise.
(PACK_EXPANSION_FORCE_EXTRA_ARGS_P): Likewise.
(ARGUMENT_PACK_CHECK): Define.
(ARGUMENT_PACK_ARGS): Use ARGUMENT_PACK_CHECK.
(SET_ARGUMENT_PACK_ARGS): Likewise.
* parser.cc (cp_parser_sizeof_pack): Check for error_mark_node
before setting PACK_EXPANSION_SIZEOF_P.
Jonathan Wakely [Tue, 10 May 2022 12:06:47 +0000 (13:06 +0100)]
libstdc++: Add <spanstream> declarations to <iosfwd> [PR105284]
libstdc++-v3/ChangeLog:
PR libstdc++/105284
* include/std/iosfwd: Add declarations for <spanstream> class
templates and typedefs.
* include/std/spanstream (basic_spanbuf, basic_ispanstream)
(basic_ospanstream, basic_spanstream): Remove default template
arguments.
* testsuite/27_io/headers/iosfwd/synopsis.cc: Add <spanstream>
declarations.
* testsuite/27_io/headers/iosfwd/types.cc: Check <spanstream>
default arguments.
Jonathan Wakely [Tue, 10 May 2022 12:03:14 +0000 (13:03 +0100)]
libstdc++: Add <syncstream> declarations to <iosfwd> [PR105284]
libstdc++-v3/ChangeLog:
PR libstdc++/105284
* include/std/iosfwd: Add declarations for <synstream> class
templates and typedefs.
* include/std/syncstream (basic_syncbuf, basic_osyncstream):
Remove default template arguments.
* testsuite/27_io/headers/iosfwd/synopsis.cc: New test.
* testsuite/27_io/headers/iosfwd/types.cc: New test.
Martin Liska [Tue, 10 May 2022 15:36:28 +0000 (17:36 +0200)]
libiberty: fix wrong replacent in comments
libiberty/ChangeLog:
* regex.c: Restore comments.
Martin Liska [Tue, 10 May 2022 15:31:24 +0000 (17:31 +0200)]
libiberty: fix type in allocation
The allocation function alloc_f is called for nsize
items where each is of type void *.
libiberty/ChangeLog:
* hashtab.c (htab_empty): Use void * type instead of void **.
(htab_expand): Likewise.
Co-Authored-By: Alan Modra <amodra@gmail.com>
Martin Liska [Tue, 10 May 2022 15:00:34 +0000 (17:00 +0200)]
libiberty: fix bad replacement.
libiberty/ChangeLog:
* random.c: Remove 'define PTR'.
Martin Liska [Tue, 10 May 2022 07:47:08 +0000 (09:47 +0200)]
Remove non-ANSI C macros in ansidecl.h.
include/ChangeLog:
* ansidecl.h (PTR): Remove.
(const): Likewise.
(volatile): Likewise.
(signed): Likewise.
Martin Liska [Tue, 10 May 2022 14:00:53 +0000 (16:00 +0200)]
libiberty: stop using PTR macro
include/ChangeLog:
* hashtab.h (HTAB_EMPTY_ENTRY): Use void * instead PTR.
(HTAB_DELETED_ENTRY): Likewise.
libiberty/ChangeLog:
* alloca.c (C_alloca): Use void * instead PTR.
* calloc.c (malloc): Likewise.
(bzero): Likewise.
(calloc): Likewise.
* hashtab.c (find_empty_slot_for_expand): Likewise.
(eq_pointer): Likewise.
(htab_create_alloc_ex): Likewise.
(htab_create_typed_alloc): Likewise.
(htab_set_functions_ex): Likewise.
(htab_delete): Likewise.
(htab_empty): Likewise.
(htab_expand): Likewise.
(htab_find_with_hash): Likewise.
(htab_find): Likewise.
(htab_find_slot_with_hash): Likewise.
(htab_find_slot): Likewise.
(htab_remove_elt): Likewise.
(htab_remove_elt_with_hash): Likewise.
(htab_clear_slot): Likewise.
(htab_traverse_noresize): Likewise.
(htab_traverse): Likewise.
(htab_hash_string): Likewise.
(iterative_hash): Likewise.
(hash_pointer): Likewise.
* memchr.c (memchr): Likewise.
* memcmp.c (memcmp): Likewise.
* memcpy.c (memcpy): Likewise.
* memmove.c (memmove): Likewise.
* mempcpy.c (memcpy): Likewise.
(mempcpy): Likewise.
* memset.c (memset): Likewise.
* objalloc.c (malloc): Likewise.
(free): Likewise.
(objalloc_create): Likewise.
(_objalloc_alloc): Likewise.
(objalloc_free_block): Likewise.
* random.c (PTR): Likewise.
(void): Likewise.
(initstate): Likewise.
(setstate): Likewise.
* regex.c: Likewise.
* spaces.c (malloc): Likewise.
(free): Likewise.
* stpcpy.c (memcpy): Likewise.
* strdup.c (malloc): Likewise.
(memcpy): Likewise.
* strerror.c (malloc): Likewise.
(memset): Likewise.
* strndup.c (malloc): Likewise.
(memcpy): Likewise.
* strsignal.c (malloc): Likewise.
(memset): Likewise.
* vasprintf.c (malloc): Likewise.
* vprintf-support.c: Likewise.
* xatexit.c (malloc): Likewise.
* xmalloc.c (xmalloc): Likewise.
(xcalloc): Likewise.
(xrealloc): Likewise.
* xmemdup.c (xmemdup): Likewise.
Maciej W. Rozycki [Tue, 10 May 2022 14:02:31 +0000 (15:02 +0100)]
RISC-V: Provide `fmin'/`fmax' RTL patterns
As at r2.2 of the RISC-V ISA specification[1] (equivalent to version 2.0
of the "F" and "D" standard architecture extensions for single-precision
and double-precision floating-point respectively) the FMIN and FMAX
machine instructions fully match our requirement for the `fminM3' and
`fmaxM3' standard RTL patterns:
"For FMIN and FMAX, if at least one input is a signaling NaN, or if both
inputs are quiet NaNs, the result is the canonical NaN. If one operand
is a quiet NaN and the other is not a NaN, the result is the non-NaN
operand."
suitably for the IEEE 754-2008 `minNum' and `maxNum' operations.
However we only define `sminM3' and `smaxM3' standard RTL patterns to
produce the FMIN and FMAX machine instructions, which in turn causes the
`__builtin_fmin' and `__builtin_fmax' family of intrinsics to emit the
corresponding libcalls rather than the relevant machine instructions.
This is according to earlier revisions of the RISC-V ISA specification,
which we however do not support anymore, as from commit
4b81528241ca
("RISC-V: Support version controling for ISA standard extensions").
As from r20190608 of the RISC-V ISA specification (equivalent to version
2.2 of the "F" and "D" standard ISA extensions for single-precision and
double-precision floating-point respectively) the definition of the FMIN
and FMAX machine instructions has been updated[2]:
"Defined the signed-zero behavior of FMIN.fmt and FMAX.fmt, and changed
their behavior on signaling-NaN inputs to conform to the minimumNumber
and maximumNumber operations in the proposed IEEE 754-201x
specification."
and specifically[3]:
"Floating-point minimum-number and maximum-number instructions FMIN.S
and FMAX.S write, respectively, the smaller or larger of rs1 and rs2 to
rd. For the purposes of these instructions only, the value -0.0 is
considered to be less than the value +0.0. If both inputs are NaNs, the
result is the canonical NaN. If only one operand is a NaN, the result
is the non-NaN operand. Signaling NaN inputs set the invalid operation
exception flag, even when the result is not NaN."
Consequently for forwards compatibility with r20190608+ hardware we
cannot use the FMIN and FMAX machine instructions unconditionally even
where the ISA level of r2.2 has been specified with the `-misa-spec=2.2'
option where operation would be different between ISA revisions, that
is the handling of signaling NaN inputs.
Therefore provide new `fmin<mode>3' and `fmax<mode>3' patterns removing
the need to emit libcalls with the `__builtin_fmin' and `__builtin_fmax'
family of intrinsics, however limit them to where `-fno-signaling-nans'
is in effect, deferring to other code generation strategies otherwise as
applicable. Use newly-defined UNSPECs as the operation codes so that
the patterns are only ever used if referred to by their names, as there
is no RTL expression defined for the IEEE 754-2008 `minNum' and `maxNum'
operations.
References:
[1] "The RISC-V Instruction Set Manual, Volume I: User-Level ISA",
Document Version 2.2, May 7, 2017, Section 8.3 "NaN Generation and
Propagation", p. 48
[1] "The RISC-V Instruction Set Manual, Volume I: Unprivileged ISA",
Document Version
20190608-Base-Ratified, June 8, 2019, "Preface",
p. ii
[2] same, Section 11.6 "Single-Precision Floating-Point Computational
Instructions", p. 66
gcc/
* config/riscv/riscv.md (UNSPEC_FMIN, UNSPEC_FMAX): New
constants.
(fmin<mode>3, fmax<mode>3): New insns.
gcc/testsuite/
* gcc.target/riscv/fmax-snan.c: New test.
* gcc.target/riscv/fmax.c: New test.
* gcc.target/riscv/fmaxf-snan.c: New test.
* gcc.target/riscv/fmaxf.c: New test.
* gcc.target/riscv/fmin-snan.c: New test.
* gcc.target/riscv/fmin.c: New test.
* gcc.target/riscv/fminf-snan.c: New test.
* gcc.target/riscv/fminf.c: New test.
* gcc.target/riscv/smax-ieee.c: New test.
* gcc.target/riscv/smax.c: New test.
* gcc.target/riscv/smaxf-ieee.c: New test.
* gcc.target/riscv/smaxf.c: New test.
* gcc.target/riscv/smin-ieee.c: New test.
* gcc.target/riscv/smin.c: New test.
* gcc.target/riscv/sminf-ieee.c: New test.
* gcc.target/riscv/sminf.c: New test.
Richard Biener [Tue, 10 May 2022 13:39:46 +0000 (15:39 +0200)]
Use gimple-match folding in fold_build_cond_expr
The following cleans up if-conversions fold_build_cond_expr to
use gimple-match folding instead of GENERIC folding.
2022-05-10 Richard Biener <rguenther@suse.de>
* tree-if-conv.cc (fold_build_cond_expr): Use
match-and-simplify to simplify the condition.
(ifcvt_follow_ssa_use_edges): Remove.
(predicate_scalar_phi): Use follow_all_ssa_edges.
Thomas Schwinge [Mon, 2 May 2022 13:15:26 +0000 (15:15 +0200)]
Make 'c-c++-common/goacc/kernels-decompose-pr100400-1-*.c' behave consistently, regardless of checking level
Fix-up for commit
c14ea6a72fb1ae66e3d32ac8329558497c6e4403
"Catch 'GIMPLE_DEBUG' misbehavior in OpenACC 'kernels' decomposition
[PR100400, PR103836, PR104061]".
For C++ compilation of 'c-c++-common/goacc/kernels-decompose-pr100400-1-2.c',
we first emit a 'sorry' diagnostic, and then a 'gcc_unreachable' (or
'internal_error', see below) diagnostic, but for example, for
'--enable-checking=release' (thus, '!CHECKING_P'), the second one may actually
be turned into a 'confused by earlier errors, bailing out' diagnostic. (See
'gcc/diagnostic.cc:diagnostic_report_diagnostic': "When not checking, ICEs are
converted to fatal errors when an error has already occurred.") Thus, make
'c-c++-common/goacc/kernels-decompose-pr100400-1-2.c' behave consistently via
'-Wfatal-errors', and thus only matching the 'sorry' diagnostic.
For example, for '--enable-checking=no' (thus, '!ENABLE_ASSERT_CHECKING'), a
call to 'gcc_unreachable' cannot be assumed emit an 'internal_error'-like
diagnostic, so explicitly call 'internal_error' in
'gcc/omp-oacc-kernels-decompose.cc:visit_loops_in_gang_single_region', in the
'GIMPLE_OMP_FOR' case, to avoid regressing
'c-c++-common/goacc/kernels-decompose-pr100400-1-3.c', and
'c-c++-common/goacc/kernels-decompose-pr100400-1-4.c'.
PR middle-end/100400
gcc/
* omp-oacc-kernels-decompose.cc
(visit_loops_in_gang_single_region) <GIMPLE_OMP_FOR>: Explicitly
call 'internal_error'.
gcc/testsuite/
* c-c++-common/goacc/kernels-decompose-pr100400-1-2.c: Specify
'-Wfatal-errors'.
Thomas Schwinge [Tue, 10 May 2022 12:43:56 +0000 (14:43 +0200)]
Fix up 'libgomp.fortran/use_device_addr-5.f90' multi-device testing
Fix-up for recent commit r13-116-g3f8c389fe90bf565a6221a46bb7fb745dd4c1510
"OpenMP: Fix use_device_{addr,ptr} with in-data-sharing arg", where we
currently get:
libgomp: use_device_ptr pointer wasn't mapped
FAIL: libgomp.fortran/use_device_addr-5.f90 -O execution test
libgomp/
* testsuite/libgomp.fortran/use_device_addr-5.f90: Fix up
multi-device testing.
Nathan Sidwell [Mon, 9 May 2022 11:40:43 +0000 (04:40 -0700)]
[c++] Disambiguate ModuleKind flags
In modules, 'attached to global module' nearly always means 'not in
module purview'. Also the implementation treats, 'in global module &&
in module purview' as meaning 'header unit'. The ModuleKind flags
reflected that. The 'nearly always' means there are cases that the
first condition is not invariant, and that of course invalidates the
second equivalence.
This disambiguates the ModuleKind flags to allow that 'not quite', and
separate out header-unitness from the GMF & purview flags combination.
1) Separate out named-module vs header-unit from the MODULE/GLOBAL flags.
2) Replace the MODULE/GLOBAL flags with PURVIEW & ATTACH flags.
3) Adjust the parser state handling.
Lays ground-work for language-declaration changes.
gcc/cp/
* cp-tree.h (enum module_kind_bits): Disambiguate purview,
attach, named module vs header-unit.
(global_purview_p, not_module_p): Delete.
(named_module_p): New.
(header_module_p, module_purview_p): Adjust.
(module_attach_p, named_module_purview_p): New.
* decl.cc (duplicate_decls): Adjust.
* module.cc (declare_module, preprocessed_module): Adjust.
* name-lookup.cc (init_global_partition): Adjust.
(get_fixed_binding_slot, pushdecl): Adjust.
* parser.cc (cp_parser_module_declaration): Adjust.
(cp_parser_import_declaration, cp_parser_declaration): Adjust.
Richard Biener [Tue, 10 May 2022 09:44:40 +0000 (11:44 +0200)]
middle-end/105537 - debug processing
The following makes sure to have a consistent state of
flag_var_tracking_assignments with the distributed handling
in process_options and finish_options by moving everything to
finish_options which also restores diagnostics for
-g0 -fvar-tracking which was lost with previous changes.
2022-05-10 Richard Biener <rguenther@suse.de>
PR middle-end/105537
* toplev.cc (process_options): Move flag_var_tracking
handling ...
* opts.cc (finish_options): ... here.
* gcc.dg/torture/pr105537.c: New testcase.
Martin Liska [Tue, 10 May 2022 08:52:19 +0000 (10:52 +0200)]
libgcov: use proper type for n_functions
gcov_info::n_functions type is initialized by generated
code in build_info_type:
/* n_functions */
field = build_decl (BUILTINS_LOCATION, FIELD_DECL, NULL_TREE,
get_gcov_unsigned_t ());
It uses gcov_unsigned_t, but the struct definition in libgcov.h uses
unsigned type. That brings troubled on 16-bit targets.
PR gcov-profile/105535
libgcc/ChangeLog:
* libgcov.h (struct gcov_info): Use gcov_unsigned_t for
n_functions.
Co-Authored-By: Hans-Peter Helfert <peter-helfert@t-online.de>
Martin Liska [Tue, 10 May 2022 07:45:16 +0000 (09:45 +0200)]
Replace PTR with 'void *' in compiler.
gcc/ada/ChangeLog:
* gcc-interface/decl.cc (compare_field_bitpos): Use void *
instead PTR.
* gcc-interface/utils2.cc (compare_elmt_bitpos): Likewise.
gcc/ChangeLog:
* basic-block.h (struct basic_block_d): Use void *
instead PTR.
* cfgloop.h: Likewise.
* cgraph.h: Likewise.
* gengtype-state.cc (state_ident_by_name): Likewise.
(record_type): Likewise.
(read_state_already_seen_type): Likewise.
* gengtype.cc (dump_type): Likewise.
(input_file_by_name): Likewise.
(main): Likewise.
* ggc-common.cc (ggc_cleared_alloc_ptr_array_two_args): Likewise.
* ipa-utils.h (struct ipa_dfs_info): Likewise.
* plugin.cc (htab_hash_plugin): Likewise.
Richard Biener [Tue, 10 May 2022 07:47:06 +0000 (09:47 +0200)]
Properly use opts in finish_options
When code was moved from process_options to finish_options it
was not properly adjusted to look at and alter the opts set
passed to the function but continued to modify the global options
set. The following rectifies this and makes sure the same
mistake isn't repeated by poisoning global_options{,_set}.
2022-05-10 Richard Biener <rguenther@suse.de>
* flags.h (dwarf_debuginfo_p): Add opts argument, guard
API with !GENERATOR_FILE.
* opts.cc (global_options): Poison.
(global_options_set): Likewise.
(finish_options): Refer to options via opts.
Roger Sayle [Tue, 10 May 2022 08:44:34 +0000 (09:44 +0100)]
Avoid andb %dil when optimizing for size.
The simple test case below has the unfortunate property that on x86_64,
it is larger when compiled with -Os than when compiled with -O2.
int foo(char x)
{
return (x & 123) != 0;
}
The issue is x86's complex instruction encoding, where andb $XX,%dil
requires more bytes than andl $XX,%edi. This patch adds logic to
i386.md's *testqi_1_maybe_si and *andqi_2_maybe_si define_insn patterns
to prefer the shorter SImode alternative when optimizing for size.
2022-05-10 Uroš Bizjak <ubizjak@gmail.com>
Roger Sayle <roger@nextmovesoftware.com>
gcc/ChangeLog
* config/i386/i386.md (*testqi_1_maybe_si): Prefer shorter SImode
alternative when optimizing for size and the immediate operand is
const_0_to_127_operand.
(*andqi_2_maybe_si): Likewise.
* config/i386/predicates.md (const_0_to_127_operand): New predicate.
gcc/testsuite/ChangeLog
* gcc.target/i386/and-1.c: New test case.
Roger Sayle [Tue, 10 May 2022 08:38:47 +0000 (09:38 +0100)]
Improved constant folding for scalar evolution.
This patch adds a small (follow-up) optimization to chrec_apply for
linear chrecs to clean-up the final value expressions sometimes generated
by GCC's scalar evolution pass. The transformation of A+(X-1)*A into
A*X is usually unsafe with respect to overflow (see PR92712), and so
can't be performed by match.pd (or fold-const). However, during scalar
evolution's evaluation of recurrences it's known that X-1 can't be negative
(in fact X-1 is unsigned even when A is signed), hence this optimization
can be applied. Interestingly, this expression does get simplified in
later passes once the range of X-1 is bounded by VRP, but that occurs
long after the decision of whether to perform final value replacement,
which is based on the complexity of this expression.
The motivating test case is the optimization of the loop (from comment
int square(int x) {
int result = 0;
for (int i = 0; i < x; ++i)
result += x;
return result;
}
which is currently optimized, with final value replacement to:
final value replacement:
with expr: (int) ((unsigned int) x_3(D) +
4294967295) * x_3(D) + x_3(D)
but with this patch it first gets simplified further:
final value replacement:
with expr: x_3(D) * x_3(D)
2022-05-10 Roger Sayle <roger@nextmovesoftware.com>
gcc/ChangeLog
* tree-chrec.cc (chrec_apply): Attempt to fold the linear chrec
"{a, +, a} (x-1)" as "a*x", as the number of loop iterations, x-1,
can't be negative.
gcc/testsuite/ChangeLog
* gcc.dg/tree-ssa/pr65855-2.c: New test case.
Eric Botcazou [Thu, 27 Jan 2022 14:12:27 +0000 (15:12 +0100)]
[Ada] Export Is_Expression_Function predicate for use in gigi
gcc/ada/
* fe.h (Is_Expression_Function): Declare.
* sem_util.ads (Is_Expression_Function): Add warning line.
Alexandre Oliva [Wed, 29 Dec 2021 07:10:46 +0000 (04:10 -0300)]
[Ada] Optimize nonstandard boolean validity checking
Validity checking of enumerations with nonstandard representation
starts by checking the value range, then calling _rep_to_pos to verify
that the value itself is valid. The value range check is thus
redundant and inefficient: the _rep_to_pos call is normally inlined
when optimizing for speed and the range check slows down the fast
path; it is unnecesary and undesirable when optimizing for size, and
just unnecessary when not optimizing. This patch thus drops the range
check for nonstandard boolean types.
gcc/ada/
* exp_attr.adb (Expand_N_Attribute_Reference) <Attribute_Valid>:
Drop redundant range check for nonstandard booleans.
Alexandre Oliva [Wed, 29 Dec 2021 07:10:46 +0000 (04:10 -0300)]
[Ada] Optimize nonstandard boolean conversions
This patch improves the generated code for nonstandard boolean types.
One of the improvements extends the code that avoids converting back
to the nonstandard boolean type an expression computed as standard
boolean, when it will be converted to a(nother) nonstandard boolean
type.
The other improvement involves using the literal representation
constants in an If_Expression instead of dereferencing the T'Val array
when converting to a (nonstandard) boolean type. Avoiding the array
dereference enables the compiler middle-end to propagate the constants
and perform optimizations based on them, to the point of obviating the
improvement above.
Unfortunately, the code generated with this alternate expansion tends
to be slightly larger if it turns out to not enable any further
optimization, though it's most certainly faster, especially on targets
with conditional moves, more so if "store flag" is slow, as on x86.
Still, the array dereference is more straightforward and shorter, so
I've arranged for this alternate expansion to be used only when
optimizing for speed.
gcc/ada/
* exp_util.adb (Adjust_Result_Type): Leave result in
Standard.Boolean if it's going to be converted to another
boolean type.
* exp_ch4.adb (Expand_N_Type_Conversion): When optimizing,
convert to nonstandard booleans with an if_expression with
boolean literals.
Alexandre Oliva [Wed, 29 Dec 2021 07:10:45 +0000 (04:10 -0300)]
[Ada] Handle non-standard booleans in if_expression condition
We failed to call Adjust_Condition for the condition expression of an
if_expression, so non-standard booleans were expanded like standard
booleans, disregarding representation clauses. Fixed.
gcc/ada/
* exp_ch4.adb (Expand_N_If_Expression): Call Adjust_Condition to
handle non-standard booleans.
Justin Squirek [Fri, 21 Jan 2022 17:09:29 +0000 (17:09 +0000)]
[Ada] Incorrect ineffective use type clause warning
This patch fixes an issue in the compiler whereby a use_type_clause
incorrectly gets flagged as ineffective when the use of it comes after a
generic package instantiation where the installation of private use
clauses are required and one such clause references the same type.
gcc/ada/
* sem_ch8.adb (Use_One_Type): Remove code in charge of setting
Current_Use_Clause when Id is known to be redundant, and modify
the printing of errors associated with redundant use type
clauses so that line number gets included in more cases.
Piotr Trojanek [Mon, 24 Jan 2022 11:19:19 +0000 (12:19 +0100)]
[Ada] Simplify call to overloaded Earlier_In_Extended_Unit
We have two variants of Earlier_In_Extended_Unit that take either
Node_Id or Source_Ptr values. The caller can simply use another variant
and not explicitly convert parameters.
Code cleanup; semantics is unaffected.
gcc/ada/
* sem_warn.adb (Check_Unset_Reference): Use variant of
Earlier_In_Extended_Unit that calls Sloc internally.
Piotr Trojanek [Thu, 20 Jan 2022 17:05:39 +0000 (18:05 +0100)]
[Ada] Remove repeated conversions between Source_Ptr and Int
Both Source_Ptr and Int are integer types (and even happen to have equal
ranges). Their values can be calculated without converting
back-and-forth, e.g.:
Int (Loc1) - Int (Loc2)
can be written simply as:
Int (Loc1 - Loc2)
Code cleanup related to handling of references to unset objects.
Offending occurrences found with various invocations of grep.
gcc/ada/
* par-ch10.adb, scng.adb, sem_res.adb, sinfo-utils.adb,
treepr.adb: Simplify calculations with Source_Ptr and Loc
values.
Piotr Trojanek [Sat, 22 Jan 2022 18:39:52 +0000 (19:39 +0100)]
[Ada] Fix style in resolution of expression with actions
gcc/ada/
* sem_res.adb (Resolve_Expression_With_Actions): Fix style in
nested routines.
Piotr Trojanek [Sat, 22 Jan 2022 18:38:10 +0000 (19:38 +0100)]
[Ada] Reuse Is_Rewrite_Substitution where possible
Replace comparisons of Original_Node with semantically equivalent but
high-level calls to Is_Rewrite_Substitution. Offending occurrences found
with:
$ grep -n "Original_Node (\([A-Za-z_]\+\)) /\?= \1" *.adb
Code cleanup only; semantics is unaffected.
gcc/ada/
* atree.adb, exp_ch6.adb, exp_ch9.adb, ghost.adb, sem_ch3.adb,
sem_ch4.adb, sem_res.adb, sem_util.adb: Use
Is_Rewrite_Substitution where possible.
Piotr Trojanek [Thu, 20 Jan 2022 19:14:20 +0000 (20:14 +0100)]
[Ada] Cleanup detection of No_Elist with No and Present
Replace equality and inequality operators with calls to No and Present.
Offending occurrences found with:
$ grep -n " /\?= No_Elist" *.adb
Code cleanup only; semantics is unaffected.
gcc/ada/
* exp_ch11.adb, exp_ch5.adb, exp_prag.adb, gnat_cuda.adb,
sem_ch12.adb, sem_ch3.adb, sem_ch6.adb, sem_util.adb,
treepr.adb: Replace /= and = operators with No and Present,
respectively.
Piotr Trojanek [Sat, 22 Jan 2022 13:51:27 +0000 (14:51 +0100)]
[Ada] Prevent search for references in postconditions from going too far
Add a standard prevention against climbing the entire compilation unit.
Cleanup only; behaviour of the compiler is unaffected.
gcc/ada/
* sem_warn.adb (Within_Postcondition): Guard against search
going too far.
Piotr Trojanek [Thu, 20 Jan 2022 21:37:30 +0000 (22:37 +0100)]
[Ada] Remove tiny and incomplete optimization for unset references
Code cleanup; behaviour is unaffected.
gcc/ada/
* sem_warn.adb (Check_Unset_Reference): The early test was only
saving time of calls to Original_Node, Comes_From_Source and
Nkind, which are all quick and cheap.
Piotr Trojanek [Thu, 20 Jan 2022 21:36:16 +0000 (22:36 +0100)]
[Ada] Cleanup unnecessary declare block in Check_Unreachable_Code
Cleanup related to static detection of references to uninitialized
variables. Semantics is unaffected.
gcc/ada/
* sem_ch5.adb (Check_Unreachable_Code): Remove inner declare
block; refill code and comments.
Piotr Trojanek [Thu, 20 Jan 2022 19:12:52 +0000 (20:12 +0100)]
[Ada] Refine iteration from entities to formals
When matching formal parameters from spec and body it is cleaner and
more efficient to iterate with First_Formal/Next_Formal and not with
First_Entity/Next_Entity. The previous iteration could unintentionally
pick entities from within the subprogram body, e.g. objects declared
within the subprogram.
gcc/ada/
* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Replace
First_Entity/Next_Entity with First_Formal/Next_Formal; rename
E1/E2 to F1/F2.
Piotr Trojanek [Sat, 22 Jan 2022 15:32:57 +0000 (16:32 +0100)]
[Ada] Check declare and qualified expressions for unset references
Detection of references to unset (uninitialized) objects requires calls
to Check_Unset_Reference on every subexpression of a composite statement
and expression. For declare and qualified expressions this was done only
when they occurred within another composite statement/expression.
gcc/ada/
* sem_res.adb (Resolve_Declare_Expression): Check expression for
references to unset objects.
(Resolve_Qualified_Expression): Likewise.
* sem_warn.adb (Check_Unset_Reference): Remove handling of
declare and qualified expressions; clarify comment for type
conversions.
Piotr Trojanek [Thu, 20 Jan 2022 23:33:06 +0000 (00:33 +0100)]
[Ada] Check if- and case-expressions for unset references
Detection of references to unset (uninitialized) objects requires calls
to Check_Unset_Reference on every subexpression of a composite statement
and expression. This was missing for if-expressions and incomplete for
case-expressions.
gcc/ada/
* sem_res.adb (Resolve_Case_Expression): Check alternative
expressions for references to unset objects.
(Resolve_If_Expression): Check condition, then and else
expressions for references to unset objects.
Kévin Le Gouguec [Tue, 25 Jan 2022 15:18:21 +0000 (16:18 +0100)]
[Ada] Fix a couple of typos
gcc/ada/
* doc/gnat_rm/implementation_defined_attributes.rst,
doc/gnat_ugn/the_gnat_compilation_model.rst: Fix typos.
* gnat_rm.texi, gnat_ugn.texi: Regenerate.
Etienne Servais [Wed, 19 Jan 2022 14:19:18 +0000 (15:19 +0100)]
[Ada] Fix typo in comment for Is_Predicate_Static
gcc/ada/
* sem_ch13.adb (Is_Predicate_Static): Fix typo in comment.
Yannick Moy [Tue, 25 Jan 2022 13:32:38 +0000 (14:32 +0100)]
[Ada] Fix indentation to follow uniform style across runtime units
gcc/ada/
* libgnat/s-valuei.adb: Fix indentation.
* libgnat/s-valuei.ads: Same.
Claire Dross [Fri, 21 Jan 2022 09:42:49 +0000 (10:42 +0100)]
[Ada] Accept Structural in aspect Subprogram_Variant and pragma Loop_Variant
Add a new form of variants to ensure termination of loops or recursive
subprograms. Structural variants correspond to objects which designate a
part of the data-structure they used to designate in the previous loop
iteration or recursive call. They only imply termination if the
data-structure is acyclic, which is the case in SPARK but not in Ada in
general. The fact that these variants are correct is only verified
formally by the proof tool and not by the compiler or dynamically at
execution like other forms of variants.
gcc/ada/
* snames.ads-tmpl: Add "Structural" as a name.
* sem_prag.adb: (Analyze_Pragma): Accept modifier "Structural"
in pragmas Loop_Variant and Subprogram_Variant. Check that items
associated to Structural occur alone in the pragma associations.
(Analyze_Subprogram_Variant_In_Decl_Part): Idem.
* exp_prag.adb (Expand_Pragma_Loop_Variant): Discard structural
variants.
(Expand_Pragma_Subprogram_Variant): Idem.
gcc/testsuite/
* gnat.dg/loopvar.adb: Update expected error message.
Claire Dross [Thu, 20 Jan 2022 08:15:28 +0000 (09:15 +0100)]
[Ada] Proof of System.Val_Int at gold level
gcc/ada/
* libgnat/s-valint.ads: Add SPARK_Mode and pragma to ignore
assertions in instance and add additional ghost parameters to
the instance of Value_I.
* libgnat/s-vallli.ads: Idem.
* libgnat/s-valllli.ads: Idem.
* libgnat/s-valuei.ads, libgnat/s-valuei.adb: New generic
parameters for ghost functions from System.Valueu. Add
functional contracts.
Eric Botcazou [Thu, 13 Jan 2022 23:05:54 +0000 (00:05 +0100)]
[Ada] Fix hiding of user-defined operator that is not a homograph
This adds a missing test for the presence of a homograph when applying
the RM 8.4(10) clause about the visibility of operators, and removes
resolution code made obsolete by the change. There is also a fixlet
for a previously undetected ambiguity in the runtime.
gcc/ada/
* sem_res.adb (Resolve_Eqyality_Op): Remove obsolete code.
(Resolve_Op_Not): Likewise.
* sem_type.adb (Disambiguate): Add missing test for RM 8.4(10).
* libgnat/s-dwalin.adb (Enable_Cache): Fix ambiguity.
(Symbolic_Address): Likewise.
gcc/testsuite/
* gnat.dg/equal7.adb: Add expected error messages (code is now
illegal).