Christian Eggers [Fri, 23 Sep 2022 14:55:54 +0000 (16:55 +0200)]
advertising: parse_secondary: fix loop condition
"secondary" isn't an array of pointers, so the iterator can never be
NULL.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Isak Westin [Fri, 23 Sep 2022 11:31:49 +0000 (13:31 +0200)]
mesh: Reply error if appkey added for wrong netkey
If a known appkey is added for a different netkey, the status reply
should be Invalid NetKey.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Isak Westin [Fri, 23 Sep 2022 11:31:48 +0000 (13:31 +0200)]
mesh: Clear addr field if virt sub failed
If processing failed for a Config Model Subscription Virtual Address
Add/Delete/Overwrite message, the address field in the status reply
should be set to zero. See MshPRFv1.0.1 section 4.4.1.2.8.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Brian Gix [Thu, 22 Sep 2022 20:38:50 +0000 (13:38 -0700)]
lib: Add defines of new MGMT opcodes and events
Populated new opcodes and events into static mgmt_ev and mgmt_op string
arrays.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Brian Gix [Thu, 22 Sep 2022 20:38:49 +0000 (13:38 -0700)]
mgmt: Add support for Mesh in the kernel
These commands and events allow User space apps to test for Mesh
support, and request incoming mesh packets be delivered and request
outbound mesh packets to be sent. This is the basis for sharing
one controller between the legacy bluetoothd daemon and the mesh
bluetooth-meshd daemon.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Isak Westin [Wed, 21 Sep 2022 11:16:30 +0000 (13:16 +0200)]
mesh: Remove RFU check for publication set
It is not stated in the mesh profile that the RFU bits in a Model
Publication Set message have to be zero. In fact, PTS test
MESH/NODE/CFG/MP/BV-01-C is sending that command with non-zero RFU and
expects a reply.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Isak Westin [Wed, 21 Sep 2022 11:16:29 +0000 (13:16 +0200)]
mesh: Do not accept publication for unbound appkey
If a user tries to configure publication of a model with an appkey that
is not bound to that model, an error should be returned.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Isak Westin [Wed, 21 Sep 2022 11:16:28 +0000 (13:16 +0200)]
mesh: Add interface output filter
According to the mesh profile (3.4.5.2), if TTL is set to 1 for an
outgoing message, that message shall be dropped.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Brian Gix [Thu, 30 Jun 2022 21:10:13 +0000 (14:10 -0700)]
mesh: Fix potential memory leak
This memory leak will never happen, however since we added a new
return from function that malloc'd memory, the free should still be
done.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Tedd Ho-Jeong An [Wed, 21 Sep 2022 19:28:26 +0000 (12:28 -0700)]
tools/ioctl-tester - Add ioctl-tester
This patch adds ioctl-tester which tests the IOCTL commands.
HCI Down
Device List
Device List - Invalid Param 1
Device Info
Reset Stat
Set Link Mode - ACCEPT
Set Link Mode - MASTER
Set Pkt Type - DM
Set Pkt Type - DH
Set Pkt Type - HV
Set Pkt Type - 2-DH
Set Pkt Type - 2-DH
Set Pkt Type - ALL
Set ACL MTU - 1
Set ACL MTU - 2
Set SCO MTU - 1
Set SCO MTU - 2
Block BDADDR - Success
Block BDADDR - Fail
Unblock BDADDR - Success
Unblock BDADDR - Fail
Connection List - No Conn
Connection List
Connection Info
Connection Info - No Connection
Connection Info - Wrong Type
Authentication Info - No Connection
Authentication Info
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Sathish Narasimman [Wed, 21 Sep 2022 10:27:32 +0000 (15:57 +0530)]
Profiles: Enable bt_vcp_set_debug
Set bt_vcp_set_debug to be used for VCP.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Sathish Narasimman [Wed, 21 Sep 2022 10:27:31 +0000 (15:57 +0530)]
shared/vcp: Add bt_vcp_set_debug
Add support for bt_vcp_set_debug and replace the exisiting DBG.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 21 Sep 2022 21:52:53 +0000 (14:52 -0700)]
shared/gatt-db: Fix scan-build warnings
This fixes the following warnings:
src/shared/gatt-db.c:1339:2: warning: Undefined or garbage value
returned to caller [core.uninitialized.UndefReturn]
return data.num_of_res;
^~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-db.c:725:5: warning: Access to field 'handle' results
in a dereference of a null pointer
service->attributes[0]->handle == handle)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 21 Sep 2022 21:49:48 +0000 (14:49 -0700)]
gatt: Fix scan-build warnings
This fixes the following warnings:
src/gatt-database.c:3541:14: warning: Value stored to 'iface' during
its initialization is never read [deadcode.DeadStores]
const char *iface = g_dbus_proxy_get_interface(proxy);
^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/gatt-database.c:3542:14: warning: Value stored to 'path' during
its initialization is never read [deadcode.DeadStores]
const char *path = g_dbus_proxy_get_path(proxy);
^~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 21 Sep 2022 21:45:03 +0000 (14:45 -0700)]
client/gatt: Fix notification enabled/disabled output
When notifications are enabled/disable the output was not print a new
line.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 21 Sep 2022 21:43:24 +0000 (14:43 -0700)]
gatt-db: Check if permissions are set when adding CCC
CCC shall always have some permission set.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 21 Sep 2022 21:40:14 +0000 (14:40 -0700)]
gatt: Fix not setting permissions for CCC
CCC shall always have both Read and Write permissions set in addition to
what application set.
Fixes: https://github.com/bluez/bluez/issues/399
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Sathish Narasimman [Mon, 19 Sep 2022 08:07:22 +0000 (13:37 +0530)]
monitor/att: Add decoding support for Volume Control Serice
This adds decoding support for VCS attributes
> ACL Data RX: Handle 3585 flags 0x02 dlen 7
ATT: Read Request (0x0a) len 2
Handle: 0x0017 Type: Volume State (0x2b7d)
< ACL Data TX: Handle 3585 flags 0x00 dlen 8
ATT: Read Response (0x0b) len 3
Value: 000000
Handle: 0x0017 Type: Volume State (0x2b7d)
Volume Setting: 0
Not Muted: 0
Change Counter: 0
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 3585 Address: 49:71:FC:C0:66:C6 (Resolvable)
Count: 1
> ACL Data RX: Handle 3585 flags 0x02 dlen 7
ATT: Read Request (0x0a) len 2
Handle: 0x001c Type: Volume Flags (0x2b7f)
< ACL Data TX: Handle 3585 flags 0x00 dlen 6
ATT: Read Response (0x0b) len 1
Value: 01
Handle: 0x001c Type: Volume Flags (0x2b7f)
Volume Falg: 1
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Sathish Narasimman [Mon, 19 Sep 2022 08:07:21 +0000 (13:37 +0530)]
profiles: Add initial code for vcp plugin
This adds initial code for vcp plugin which handles Volume Control
Profile and Volume Control Service.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Sathish Narasimman [Mon, 19 Sep 2022 08:07:20 +0000 (13:37 +0530)]
shared/vcp: Add initial code for handling VCP
This adds initial code for Volume Control Profile.
Change-Id: I95452360c7963470ca535eb7fb47f162fff5a86d
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Fri, 16 Sep 2022 23:41:53 +0000 (16:41 -0700)]
shared/gatt-client: Make use of gatt_db_attribute_get_ccc
This makes use of gatt_db_attribute_get_ccc to locate a CCC of a given
attribute.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Fri, 16 Sep 2022 00:21:28 +0000 (17:21 -0700)]
shared/tester: Remove include to io.h
Users of tester.h shall also include io.h, including io.h by default may
cause errors if has been previously included.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Fri, 16 Sep 2022 00:14:39 +0000 (17:14 -0700)]
shared/bap: Remove include to io.h
Users of bap.h shall also include io.h, including io.h by default may
cause errors if has been previously included.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Sathish Narasimman [Thu, 15 Sep 2022 09:54:09 +0000 (15:24 +0530)]
lib/uuid: Add VCS UUIDs
This adds Volume Control Service UUIDs which will be used by
Volume Control Profile.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 13 Sep 2022 23:32:38 +0000 (16:32 -0700)]
rfcomm-tester: Add test to close socket while connecting
This adds Basic RFCOMM Socket Client - Close test which attempt to close
socket while connecting.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 12 Sep 2022 21:21:13 +0000 (14:21 -0700)]
shared/bap: Fix attempting to disable stream when it is idle
If the stream is already in idle state do not attempt to disable it
again.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Brian Gix [Thu, 8 Sep 2022 14:55:55 +0000 (07:55 -0700)]
monitor: Add mesh MGMT cmds/events to btmon parser
Sample Output:
@ MGMT Command: Read Mesh Features (0x0058) plen 0
@ MGMT Event: Command Complete (0x0001) plen 7
Read Mesh Features (0x0058) plen 4
Status: Success (0x00)
Index: 0
Max Handles: 3
Used Handles: 0
@ MGMT Command: Set Mesh Receiver (0x0057) plen 9
Enable: 1
Window: 4096
Period: 4096
Num AD Types: 3
AD Type: 42
AD Type: 43
AD Type: 41
@ MGMT Event: Command Complete (0x0001) plen 3
Set Mesh Receiver (0x0057) plen 0
Status: Success (0x00)
@ MGMT Command: Mesh Send (0x0059) plen 43
Address: 00:00:00:00:00:00 (OUI 00-00-00)
Addr Type: 2
Instant: 0x0000000000000000
Delay: 0
Count: 1
Data Length: 24
Data: 172b01002dda0c2491537ae2000000009de2120a725038b2
@ MGMT Event: Command Complete (0x0001) plen 4
Mesh Send (0x0059) plen 1
Status: Success (0x00)
Handle: 3
@ MGMT Event: Mesh Packet Complete (0x0032) plen 1
Handle: 3
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Brian Gix [Thu, 8 Sep 2022 14:55:54 +0000 (07:55 -0700)]
monitor: Add ADV Monitor events to btmon parser
Add missing ADV Monitor MGMT events
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 6 Sep 2022 19:54:36 +0000 (12:54 -0700)]
shared/bap: Fix not unregistering disconnect callback
bt_bap_detach shall always unregister the disconnect callback otherwise
the session pointer may still be accessible.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Fri, 2 Sep 2022 20:54:05 +0000 (13:54 -0700)]
rfcomm-tester: Use latest Bluetooth version
This makes rfcomm-tester use the latest Bluetooth supported by the
emulator which is useful the detect regression related to ACL data
transfer.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Brian Gix [Thu, 1 Sep 2022 21:07:22 +0000 (14:07 -0700)]
mgmt-tester: Adds turning on Mesh Experimental feature
Turns on experimental Mesh feature, and expects it in report when
querying which experimental features are supported and have been
enabled.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Brian Gix [Wed, 31 Aug 2022 23:59:32 +0000 (16:59 -0700)]
tools: Add mesh-tester to test Kernel mesh support
Ever growing set of tests for Mesh kernel support
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Brian Gix [Wed, 31 Aug 2022 23:59:31 +0000 (16:59 -0700)]
lib: Add mgmt opcodes and events for Mesh
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Bastien Nocera [Thu, 1 Sep 2022 11:07:18 +0000 (13:07 +0200)]
adapter: Fix typo in function name
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Bastien Nocera [Thu, 1 Sep 2022 11:07:17 +0000 (13:07 +0200)]
adapter-api: Add PowerState property documentation
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Bastien Nocera [Thu, 1 Sep 2022 11:07:16 +0000 (13:07 +0200)]
client: Print the PowerState property
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Bastien Nocera [Thu, 1 Sep 2022 11:07:15 +0000 (13:07 +0200)]
adapter: Implement PowerState property
This property should allow any program to show whether an adapter is in
the process of being turned on.
As turning on an adapter isn't instantaneous, it's important that the UI
reflects the transitional state of the adapter's power, and doesn't
assume the device is already turned on but not yet working, or still off
despite having requested for it to be turned on, in both cases making
the UI feel unresponsive.
This can also not be implemented in front-ends directly as, then,
the status of an adapter wouldn't be reflected correctly in the Settings
window if it's turned on in the system menu. Implementing it in the
front-ends would also preclude from having feedback about the state of
the adapter when bluetoothd is the one powering up the adapter after the
rfkill was unblocked.
See https://gitlab.gnome.org/GNOME/gnome-bluetooth/-/issues/121
and the original https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5773
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Bastien Nocera [Thu, 1 Sep 2022 11:07:14 +0000 (13:07 +0200)]
adapter: Keep track of whether the adapter is rfkill'ed
Instead of only replying to D-Bus requests with an error saying the
adapter is blocked, keep track of the rfkill being enabled or disabled
so we know the rfkill state of the adapter at all times.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 30 Aug 2022 23:55:32 +0000 (16:55 -0700)]
media: Fix scan-build warnings
This fixes the following warnings:
profiles/audio/media.c:1465:6: warning: 8th function call argument
is an uninitialized value
if (media_endpoint_create(adapter, sender, path, uuid, delay_reporting,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
profiles/audio/media.c:3012:3: warning: Use of memory after it is freed
release_endpoint(adapter->endpoints->data);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
profiles/audio/media.c:3015:3: warning: Use of memory after it is freed
media_player_destroy(adapter->players->data);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 30 Aug 2022 21:49:20 +0000 (14:49 -0700)]
media: Fix registering PAC endpoints if ISO socket are not supported
If adapter don't support ISO sockets the PAC UUIDs shall not be allowed
to be registered as they depend on ISO sockets to work properly.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 30 Aug 2022 21:37:27 +0000 (14:37 -0700)]
shared/shell: Fix scan-build error
This fixes the following error:
src/shared/shell.c:1135:19: warning: Null pointer passed to 1st
parameter expecting 'nonnull'
data.timeout = atoi(optarg);
^~~~~~~~~~~~
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 30 Aug 2022 21:24:08 +0000 (14:24 -0700)]
client/player: Fix checkpatch warning
This fixes the following checkpatch warning:
WARNING:LINE_SPACING: Missing a blank line after declarations
216: FILE: client/player.c:625:
+ GDBusProxy *proxy = l->data;
+ print_player(proxy, NULL);
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Frédéric Danis [Tue, 30 Aug 2022 14:47:34 +0000 (16:47 +0200)]
profiles: Fix function definition style
This was found by checkpatch in previous commit:
WARNING:SPACING: Unnecessary space before function pointer arguments
124: FILE: src/shared/bap.h:123:
+ int (*select) (struct bt_bap_pac *lpac, struct bt_bap_pac *rpac,
Do the same for (*config) and (*clear) for consistence.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Frédéric Danis [Tue, 30 Aug 2022 14:47:33 +0000 (16:47 +0200)]
doc: Add remote endpoint path to SelectProperties
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Frédéric Danis [Tue, 30 Aug 2022 14:47:32 +0000 (16:47 +0200)]
profiles: Add remote endpoint path to SelectProperties
This adds the remote endpoint path to the dictionary sent in
SelectProperties.
It allows audio application to know for which remote endpoint the call is
done and so for which it should act as an initiator.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 29 Aug 2022 21:36:06 +0000 (14:36 -0700)]
client: Add -e/--endpoint option to auto register endpoints
This adds -e/--endpoint option that can be used to auto register
supported endpoints.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 29 Aug 2022 21:33:04 +0000 (14:33 -0700)]
shell: Set empty argument if optarg is NULL
This sets enmpty string ("") when argument don't set any optarg so the
application can tell when an option was set or not.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Christian Eggers [Thu, 25 Aug 2022 20:38:48 +0000 (22:38 +0200)]
tools/btmgmt: add missing return statement
Leave function on error instead of printing (possibly) invalid flags.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Christian Eggers [Thu, 25 Aug 2022 20:38:28 +0000 (22:38 +0200)]
client/advertising: Fix typos: *_exits --> *_exists
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Christian Eggers [Thu, 25 Aug 2022 20:39:03 +0000 (22:39 +0200)]
client: Add missing return statement in error path
Client will SEGFAULT if default_ctrl==NULL
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Frédéric Danis [Fri, 26 Aug 2022 10:00:34 +0000 (12:00 +0200)]
profiles: Update transport Links property on state change to QoS
Currently, the Links property is only sent after the first call to the
Acquire method, this cmay result in a rejection if a linked transport tries
to call the Acquire method before receiving the Links update.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Frédéric Danis [Wed, 24 Aug 2022 15:05:19 +0000 (17:05 +0200)]
profiles: Allow linked transport to release the fd
Multiple transports can be linked when using LE Audio BAP.
In this case only one transport is used to Acquire the file descriptor
which will be shared by all linked transports.
In the same way, any transport can Release the file descriptor.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 16 Sep 2020 21:07:44 +0000 (14:07 -0700)]
client/player: Use QoS interval on transport.send
This makes use of QoS interval when sending a file.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 5 Aug 2020 00:19:43 +0000 (17:19 -0700)]
client/player: Add support for PACS endpoints
This adds support for PAC_SINK and PAC_SOURCE endpoints as well as LC3
presets.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 5 Aug 2020 00:18:27 +0000 (17:18 -0700)]
test/simple-endpoint: Add support for LC3 endpoints
This adds support for LC3 sink/source endpoints.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 11 May 2022 23:51:19 +0000 (16:51 -0700)]
media-api: Add SelectProperties
This adds SelectProperties which is a more extensible version of
SelectCapability since it takes a dictionary rather than a byte array
and define new Properties for LE Audio.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Fri, 24 Jun 2022 23:30:43 +0000 (16:30 -0700)]
shared: Add definition for LC3 codec
This adds the definition for LC3 codec capabilities and configuration.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 5 Aug 2020 00:09:27 +0000 (17:09 -0700)]
profiles: Add initial code for bap plugin
This adds initial code for bap plugin which handles Basic Audio
Profile, Publish Audio Capabilities Service and Audio Stream Control
Service.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 5 Aug 2020 00:04:21 +0000 (17:04 -0700)]
shared/bap: Add initial code for handling BAP
This adds initial code for Basic Audio Profile.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 5 Aug 2020 00:06:40 +0000 (17:06 -0700)]
lib/uuid: Add PACS/ASCS UUIDs
This adds PACS/ASCS UUIDs which will be used by Basic Audio Profile.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Thu, 14 Apr 2022 00:17:01 +0000 (17:17 -0700)]
adapter: Add btd_adapter_find_device_by_fd
This adds btd_adapter_find_device_by_fd that lookup a device by a fd
socket destination address.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Thu, 25 Aug 2022 20:05:23 +0000 (13:05 -0700)]
gatt: Parse error message
Application can now encode an error code into the D-Bus reply error
message (0x80-0x9f).
Fixes: https://github.com/bluez/bluez/issues/380
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Thu, 25 Aug 2022 19:46:38 +0000 (12:46 -0700)]
gatt-api: Add error code ReadValue/WriteValue
This allows application to return error codes in the range allowed by
the spec:
'GATT - Section 4.9.5:
Application Error 0x80 – 0x9F Application error code defined by a
higher layer specification.'
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Ronan Pigott [Mon, 22 Aug 2022 23:19:10 +0000 (16:19 -0700)]
zsh: drop no more arguments message
This usage of the _message as a completion function is invalid, and
will result in an error if invoked by _arguments when the user has a
format style set for completion messages.
We can just drop this message, since it is not necessary.
Before:
$ zstyle ':completion:*:messages' format '%d'
$ bluetoothctl connect <TAB>
_message:zformat:42: invalid argument: -J
After:
$ zstyle ':completion:*:messages' format '%d'
$ bluetoothctl connect <TAB>
31:41:59:26:53:59 -- Bose QuietComfort 35
11:22:33:44:55:66 -- Pixel 5
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Archie Pusaka [Tue, 23 Aug 2022 04:15:56 +0000 (12:15 +0800)]
adapter: Reset pending settings when receiving MGMT error
We set the pending settings flag when sending MGMT_SETTING_*
commands to the MGMT layer and clear them when receiving a
successful reply, but we don't clear them when receiving an error
reply. This might cause a setting to be stuck in pending state.
Therefore, also clear the pending flag when receiving error.
Furthermore, this patch also postpones setting the pending flag
until we queue the MGMT command in order to avoid setting it too
soon but we return early.
This was caught during power off test, where MGMT_OP_SET_POWERED
returns Authentication Failed because disconnection takes too long.
Future attempts to switch power will then be ignored.
< HCI Command: Disconnect (0x01|0x0006) plen 3 #17916 [hci0] 12.502908
Handle: 512
Reason: Remote Device Terminated due to Power Off (0x15)
> HCI Event: Command Status (0x0f) plen 4 #17917 [hci0] 12.503185
Disconnect (0x01|0x0006) ncmd 1
Status: Success (0x00)
@ MGMT Event: Command Status (0x0002) plen 3 {0x0001} [hci0] 14.519491
Set Powered (0x0005)
Status: Authentication Failed (0x05)
= bluetoothd: Failed to set mode: Authentication Failed (0x05) 14.520042
= bluetoothd: adapter /org/bluez/hci0 set power to 0 14.813533
> HCI Event: Disconnect Complete (0x05) plen 4 #17918 [hci0] 16.509043
Status: Success (0x00)
Handle: 512
Reason: Connection Timeout (0x08)
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 24 Aug 2022 21:23:25 +0000 (14:23 -0700)]
device: Fix not setting initiator
This fixes not setting initiator flag properly when MGMT connect event
has not been processed yet but ATT is already connected or is in
progress.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
darkhz [Sun, 21 Aug 2022 16:02:48 +0000 (21:32 +0530)]
shared/util: Correct UUID for Microphone Control
According to the Bluetooth product specification list, the allocated
UUID for "Microphone Control" is 0x184D, not 0x184C.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 22 Aug 2022 21:55:14 +0000 (14:55 -0700)]
iso-tester: Make use of bthost_add_iso_hook destroy callback
This makes use of bthost_add_iso_hook to track when an ISO connection
has been disconnected and then set its handle to 0x0000 which is then
checked when the socket HUP to confirm the remote has properly
disconnected (e.g. received Disconnected Complete).
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 22 Aug 2022 21:54:41 +0000 (14:54 -0700)]
bthost: Add destroy callback to bthost_add_iso_hook
This adds a destroy callback to bthost_add_iso_hook so its user can
detect when the hook is freed when the connection is disconnected.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Thu, 18 Aug 2022 21:46:14 +0000 (14:46 -0700)]
iso-tester: Fix using shutdown(SHUT_RDWR)
shutdown(SHUT_RDWR) results in socket being HUP immeditaly instead of
waiting for Disconnect Complete event so instead just use SHUT_WR to
start the disconnect procedure without causing the socket to HUP.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 16 Aug 2022 22:04:12 +0000 (15:04 -0700)]
hog-lib: Fix scan-build error
This fixes the following errors:
profiles/input/hog-lib.c:600:19: warning: Access to field 'handle'
results in a dereference of a null pointer (loaded from variable 'chr')
report->handle = chr->handle;
^~~~~~~~~~~
profiles/input/hog-lib.c:637:11: warning: Access to field 'value_handle'
results in a dereference of a null pointer (loaded from variable 'chr')
start = chr->value_handle + 1;
^~~~~~~~~~~~~~~~~
profiles/input/hog-lib.c:1240:11: warning: Access to field 'value_handle'
results in a dereference of a null pointer (loaded from variable 'chr')
start = chr->value_handle + 1;
^~~~~~~~~~~~~~~~~
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 16 Aug 2022 18:56:32 +0000 (11:56 -0700)]
hog-lib: Don't restrict Report MAP size
Although HIDS spec is quite clear the Report MAP shall be limited to
512 bytes it doesn't seem OS do enforce that on the profile/client side
and since there isn't any qualification test enforcing it either there
are quite many devices which uses Report MAP bigger that 512 bytes
(e.g.: Brydge W-Touch and Lenovo Duet 3 BT Folio).
https://github.com/bluez/bluez/issues/377
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 15 Aug 2022 23:21:59 +0000 (16:21 -0700)]
build: Enable admin plugin
This enables admin plugin with bootstrap-configure so it is normally
build by the likes of CI.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 15 Aug 2022 23:20:31 +0000 (16:20 -0700)]
client: Move admin submenu
This moves admin submenu to admin.c so it is not mixed up with other
submenus code.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 15 Aug 2022 22:32:42 +0000 (15:32 -0700)]
adapter: Check flags are supported
This makes sure the flags are supported before attempting to set it.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 15 Aug 2022 19:01:56 +0000 (12:01 -0700)]
iso-tester: Introduce tests for Disconnect/Reconnect
This introduces a test that do use shutdown to disconnect an ISO socket
and then another one that attempts to reconnect it again to emulate
upper profile transitions.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Fri, 5 Aug 2022 21:49:31 +0000 (14:49 -0700)]
iso-tester: Add ISO 48_2_1 Defer Receive - Success
This adds a test to check if different QoS are properly handled when
acting as peripheral.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Fri, 5 Aug 2022 21:48:37 +0000 (14:48 -0700)]
bthost: Add qos support to bthost_set_cig_params
This enables setting QoS other then the mandatory 16_2_1.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Thu, 4 Aug 2022 22:24:14 +0000 (15:24 -0700)]
test-tester: This add tests for tester
This adds tests for the tester itself:
> unit/test-tester
Test Summary
------------
/tester/basic Passed 0.000 seconds
/tester/setup_io Passed 0.000 seconds
/tester/io_send Passed 0.000 seconds
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.000355 seconds
Change-Id: I272f4e8503b7f4e4355d251c50ac8493a16b4eb8
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Thu, 4 Aug 2022 22:22:23 +0000 (15:22 -0700)]
shared/tester: Add tester_setup_io
This adds tester_setup_io which can be used to add a PDU list in the
form of iovec.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Fri, 5 Aug 2022 01:07:17 +0000 (18:07 -0700)]
build: Fix make check failing
This fixes make check failing because lack of suppression for bind on
bt_log_open.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 3 Aug 2022 17:20:25 +0000 (10:20 -0700)]
iso-tester: Test BT_DEFER_SETUP works with getsockopt
This attempts to test BT_DEFER_SETUP is properly set when the test has
defer flag set.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 2 Aug 2022 00:05:36 +0000 (17:05 -0700)]
sixaxis: Fix fliping device.trusted automatically
device.trusted is a user preference which controls if the devices needs
to be authorized or not so the plugin shall not overwrite it and instead
just honor what user has set and skip authorizing if already trusted.
Fixes: https://github.com/bluez/bluez/issues/372
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 2 Aug 2022 16:31:04 +0000 (09:31 -0700)]
device: Add btd_ prefix to device_is_trusted
This adds btd_ prefix to device_is_trusted so it can be used by
plugins.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 1 Aug 2022 22:19:13 +0000 (15:19 -0700)]
device: Fix not auto-connecting profile
If the profile is registered and marked to auto-connect it shall
automatically be connected whenever a device is already connected.
Fixes: https://github.com/bluez/bluez/issues/370
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Thu, 28 Jul 2022 20:53:59 +0000 (13:53 -0700)]
iso-test: Add ISO 48_2_1 Defer Send
This adds ISO 48_2_1 Defer Send test which enables just output instead
of both.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Marcel Holtmann [Sun, 24 Jul 2022 20:59:52 +0000 (22:59 +0200)]
Release 5.65
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Marcel Holtmann [Sun, 24 Jul 2022 20:33:04 +0000 (22:33 +0200)]
build: Update library version
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Thu, 5 May 2022 01:17:50 +0000 (18:17 -0700)]
isotest: Add documentation
This adds isotest.rst which documents the modes and options of
isotest(1) and is then converted isotest.1 manpage.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 7 Aug 2019 07:50:32 +0000 (10:50 +0300)]
tools: Add isotest tool
This adds isotest tool which can be used to test ISO sockets.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 27 Oct 2020 18:23:10 +0000 (11:23 -0700)]
tools: Add iso-tester
This adds iso-tester which tests BTPROTO_ISO socket:
Basic Framework - Success
Basic ISO Socket - Success
Basic ISO Get Socket Option - Success
Basic ISO Set Socket Option - Success
ISO QoS 8_1_1 - Success
ISO QoS 8_2_1 - Success
ISO QoS 16_1_1 - Success
ISO QoS 16_2_1 - Success
ISO QoS 16_2_1 CIG 0x01 - Success
ISO QoS 16_2_1 CIG 0x01 CIS 0x01 - Success
ISO QoS 24_1_1 - Success
ISO QoS 24_2_1 - Success
ISO QoS 32_1_1 - Success
ISO QoS 32_2_1 - Success
ISO QoS 44_1_1 - Success
ISO QoS 44_2_1 - Success
ISO QoS 48_1_1 - Success
ISO QoS 48_2_1 - Success
ISO QoS 48_3_1 - Success
ISO QoS 48_4_1 - Success
ISO QoS 48_5_1 - Success
ISO QoS 48_6_1 - Success
ISO QoS 8_1_2 - Success
ISO QoS 8_2_2 - Success
ISO QoS 16_1_2 - Success
ISO QoS 16_2_2 - Success
ISO QoS 24_1_2 - Success
ISO QoS 24_2_2 - Success
ISO QoS 32_1_2 - Success
ISO QoS 32_2_2 - Success
ISO QoS 44_1_2 - Success
ISO QoS 44_2_2 - Success
ISO QoS 48_1_2 - Success
ISO QoS 48_2_2 - Success
ISO QoS 48_3_2 - Success
ISO QoS 48_4_2 - Success
ISO QoS 48_5_2 - Success
ISO QoS 48_6_2 - Success
ISO QoS - Invalid
ISO Connect2 CIG 0x01 - Success
ISO Send - Success
ISO Receive - Success
ISO Defer - Success
ISO Defer Send - Success
ISO Defer Receive - Success
ISO Defer Reject - Success
ISO Send and Receive - Success
ISO Broadcaster - Success
ISO Broadcaster BIG 0x01 - Success
ISO Broadcaster BIG 0x01 BIS 0x01 - Success
ISO Broadcaster Receiver - Success
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 28 Sep 2020 22:59:51 +0000 (15:59 -0700)]
btio: Add support for ISO sockets
This adds support to create objects that map to ISO sockets.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 15 Dec 2021 22:24:03 +0000 (14:24 -0800)]
adapter: Add support for setting ISO Socket experimental feature
This adds support for setting ISO Socket experimental UUID which
enables the use of BTPROTO_ISO on the system.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Fri, 6 May 2022 22:27:49 +0000 (15:27 -0700)]
mgmt-tester: Fix Read Exp Feature tests
This adds ISO Socket UUID as response to Read Exp Feature.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Thu, 16 Dec 2021 00:49:08 +0000 (16:49 -0800)]
shared/util: Decode BlueZ Experimental ISO Socket UUID
This adds BlueZ experimental ISO Socket UUID to uuid128_table so it is
decoded by the likes of btmon.
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Mon, 29 Jul 2019 10:09:24 +0000 (13:09 +0300)]
lib: Add definitions for ISO socket
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Wed, 13 Jul 2022 23:40:03 +0000 (16:40 -0700)]
main: Default device_privacy to true
If privacy mode is not strictly set to network set it to device
otherwise network mode would prevent reconnections if the the identity
address is used:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 6, Part B page 2837-2838
'The Host specifies the privacy mode to be used with each peer
identity on the resolving list. If it specifies that device privacy
mode is to be used, then the Controller shall accept both the peer's
device Identity Address and a resolvable private address generated by
the peer device using its distributed IRK. Otherwise, network privacy
mode is used: the Controller shall only accept resolvable private
addresses generated by the peer device using its distributed IRK.'
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Andrew Drake [Thu, 30 Jun 2022 07:39:58 +0000 (00:39 -0700)]
adapter: Fix advertising monitor on Linux 5.12-5.17
The existing code assumes that, if a device supports advertising monitor
offload, DEVICE_FOUND events can be ignored since the kernel will send
ADV_MONITOR_DEVICE_FOUND events instead. Unfortunately, these new events
were added in 5.18, but offload was added in 5.12. This patch adds a
check on the MGMT API version so we can process the older DEVICE_FOUND
events when the new events are not supported.
Fixes: https://github.com/bluez/bluez/issues/357
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Fri, 8 Jul 2022 00:23:53 +0000 (17:23 -0700)]
btdev: Fix not checking if a CIG has any active CIS
Bluetooth Core specification says the CIG must be in configurable state
in order to accept the SetCIGParameters:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 2553:
'If the Host issues this command when the CIG is not in the
configurable state, the Controller shall return the error
code Command Disallowed (0x0C).'
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Luiz Augusto von Dentz [Tue, 5 Jul 2022 17:43:46 +0000 (10:43 -0700)]
monitor: Fix build error in some targets
This fixes the following error:
monitor/att.c: In function 'print_attribute':
monitor/att.c:1850:35: error: lvalue required as unary '&' operand
print_uuid(label, &cpu_to_le16(uuid->value.u16), 2);
Signed-off-by: Manika Shrivastava <manika.sh@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
projects / platform / upstream / bluez.git / log