review.tizen.org Git - platform/kernel/linux-starfive.git/log

Merge git://git./linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/intel/igc/igc_main.c
  06b412589eef ("igc: Add lock to safeguard global Qbv variables")
  d3750076d464 ("igc: Add TransmissionOverrun counter")

drivers/net/ethernet/microsoft/mana/mana_en.c
  a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive")
  a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h")
  92272ec4107e ("eth: add missing xdp.h includes in drivers")

net/mptcp/protocol.h
  511b90e39250 ("mptcp: fix disconnect vs accept race")
  b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning")

tools/testing/selftests/net/mptcp/mptcp_join.sh
  c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test")
  03668c65d153 ("selftests: mptcp: join: rework detailed report")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.5-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bpf.

  Still trending up in size but the good news is that the "current"
  regressions are resolved, AFAIK.

  We're getting weirdly many fixes for Wake-on-LAN and suspend/resume
  handling on embedded this week (most not merged yet), not sure why.
  But those are all for older bugs.

  Current release - regressions:

   - tls: set MSG_SPLICE_PAGES consistently when handing encrypted data
     over to TCP

  Current release - new code bugs:

   - eth: mlx5: correct IDs on VFs internal to the device (IPU)

  Previous releases - regressions:

   - phy: at803x: fix WoL support / reporting on AR8032

   - bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from
     slaves, leading to BUG_ON()

   - tun: prevent tun_build_skb() from exceeding the packet size limit

   - wifi: rtw89: fix 8852AE disconnection caused by RX full flags

   - eth/PCI: enetc: fix probing after 6fffbc7ae137 ("PCI: Honor
     firmware's device disabled status"), keep PCI devices around even
     if they are disabled / not going to be probed to be able to apply
     quirks on them

   - eth: prestera: fix handling IPv4 routes with nexthop IDs

  Previous releases - always broken:

   - netfilter: re-work garbage collection to avoid races between
     user-facing API and timeouts

   - tunnels: fix generating ipv4 PMTU error on non-linear skbs

   - nexthop: fix infinite nexthop bucket dump when using maximum
     nexthop ID

   - wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()

  Misc:

   - unix: use consistent error code in SO_PEERPIDFD

   - ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for
     upcoming IETF RFC"

* tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
  net: hns3: fix strscpy causing content truncation issue
  net: tls: set MSG_SPLICE_PAGES consistently
  ibmvnic: Ensure login failure recovery is safe from other resets
  ibmvnic: Do partial reset on login failure
  ibmvnic: Handle DMA unmapping of login buffs in release functions
  ibmvnic: Unmap DMA login rsp buffer on send login fail
  ibmvnic: Enforce stronger sanity checks on login response
  net: mana: Fix MANA VF unload when hardware is unresponsive
  netfilter: nf_tables: remove busy mark and gc batch API
  netfilter: nft_set_hash: mark set element as dead when deleting from packet path
  netfilter: nf_tables: adapt set backend to use GC transaction API
  netfilter: nf_tables: GC transaction API to avoid race with control plane
  selftests/bpf: Add sockmap test for redirecting partial skb data
  selftests/bpf: fix a CI failure caused by vsock sockmap test
  bpf, sockmap: Fix bug that strp_done cannot be called
  bpf, sockmap: Fix map type error in sock_map_del_link
  xsk: fix refcount underflow in error path
  ipv6: adjust ndisc_is_useropt() to also return true for PIO
  selftests: forwarding: bridge_mdb: Make test more robust
  selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet
  ...

net: hns3: fix strscpy causing content truncation issue

hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some
items to a string for content, and we add '\n' and '\0' in the last
two bytes of content.

strscpy() will add '\0' in the last byte of destination buffer(one of
items), it result in finishing content print ahead of schedule and some
dump content truncation.

One Error log shows as below:
cat mac_list/uc
UC MAC_LIST:

Expected:
UC MAC_LIST:
FUNC_ID MAC_ADDR STATE
pf 00:2b:19:05:03:00 ACTIVE

The destination buffer is length-bounded and not required to be
NUL-terminated, so just change strscpy() to memcpy() to fix it.

Fixes: 1cf3d5567f27 ("net: hns3: fix strncpy() not using dest-buf length as length issue")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20230809020902.1941471-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: tls: set MSG_SPLICE_PAGES consistently

We used to change the flags for the last segment, because
non-last segments had the MSG_SENDPAGE_NOTLAST flag set.
That flag is no longer a thing so remove the setting.

Since flags most likely don't have MSG_SPLICE_PAGES set
this avoids passing parts of the sg as splice and parts
as non-splice. Before commit under Fixes we'd have called
tcp_sendpage() which would add the MSG_SPLICE_PAGES.

Why this leads to trouble remains unclear but Tariq
reports hitting the WARN_ON(!sendpage_ok()) due to
page refcount of 0.

Fixes: e117dcfd646e ("tls: Inline do_tcp_sendpages()")
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/all/4c49176f-147a-4283-f1b1-32aac7b4b996@gmail.com/
Tested-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230808180917.1243540-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'dmaengine-fix-6.5' of git://git./linux/kernel/git/vkoul/dmaengine

Pull dmaengine fixes from Vinod Koul:

- HAS_IOMEM fixes for fsl edma and intel idma

- return-value fix, interrupt vector setting and typo fix for xilinx
   xdma

- email updates for codeaurora email domain move

- correct pause status for pl330 driver

- idxd clear flag on disable fix

- function documentation fix for owl dma

- potential un-allocated memory fix for mcf driver

* tag 'dmaengine-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: xilinx: xdma: Fix typo
  dmaengine: xilinx: xdma: Fix interrupt vector setting
  dmaengine: owl-dma: Modify mismatched function name
  dmaengine: idxd: Clear PRS disable flag when disabling IDXD device
  dmaengine: pl330: Return DMA_PAUSED when transaction is paused
  dmaengine: qcom_hidma: Update codeaurora email domain
  dmaengine: mcf-edma: Fix a potential un-allocated memory access
  dmaengine: xilinx: xdma: Fix Judgment of the return value
  idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM

Merge tag 'nf-23-08-10' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The existing attempt to resolve races between control plane and GC work
is error prone, as reported by Bien Pham <phamnnb@sea.com>, some places
forgot to call nft_set_elem_mark_busy(), leading to double-deactivation
of elements.

This series contains the following patches:

1) Do not skip expired elements during walk otherwise elements might
   never decrement the reference counter on data, leading to memleak.

2) Add a GC transaction API to replace the former attempt to deal with
   races between control plane and GC. GC worker sets on NFT_SET_ELEM_DEAD_BIT
   on elements and it creates a GC transaction to remove the expired
   elements, GC transaction could abort in case of interference with
   control plane and retried later (GC async). Set backends such as
   rbtree and pipapo also perform GC from control plane (GC sync), in
   such case, element deactivation and removal is safe because mutex
   is held then collected elements are released via call_rcu().

3) Adapt existing set backends to use the GC transaction API.

4) Update rhash set backend to set on _DEAD bit to report deleted
   elements from datapath for GC.

5) Remove old GC batch API and the NFT_SET_ELEM_BUSY_BIT.

* tag 'nf-23-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: remove busy mark and gc batch API
  netfilter: nft_set_hash: mark set element as dead when deleting from packet path
  netfilter: nf_tables: adapt set backend to use GC transaction API
  netfilter: nf_tables: GC transaction API to avoid race with control plane
  netfilter: nf_tables: don't skip expired elements during walk
====================

Link: https://lore.kernel.org/r/20230810070830.24064-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Martin KaFai Lau says:

====================
pull-request: bpf 2023-08-09

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 6 files changed, 102 insertions(+), 8 deletions(-).

The main changes are:

1) A bpf sockmap memleak fix and a fix in accessing the programs of
   a sockmap under the incorrect map type from Xu Kuohai.

2) A refcount underflow fix in xsk from Magnus Karlsson.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Add sockmap test for redirecting partial skb data
  selftests/bpf: fix a CI failure caused by vsock sockmap test
  bpf, sockmap: Fix bug that strp_done cannot be called
  bpf, sockmap: Fix map type error in sock_map_del_link
  xsk: fix refcount underflow in error path
====================

Link: https://lore.kernel.org/r/20230810055303.120917-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ibmvnic: Ensure login failure recovery is safe from other resets

If a login request fails, the recovery process should be protected
against parallel resets. It is a known issue that freeing and
registering CRQ's in quick succession can result in a failover CRQ from
the VIOS. Processing a failover during login recovery is dangerous for
two reasons:
1. This will result in two parallel initialization processes, this can
cause serious issues during login.
2. It is possible that the failover CRQ is received but never executed.
We get notified of a pending failover through a transport event CRQ.
The reset is not performed until a INIT CRQ request is received.
Previously, if CRQ init fails during login recovery, then the ibmvnic
irq is freed and the login process returned error. If failover_pending
is true (a transport event was received), then the ibmvnic device
would never be able to process the reset since it cannot receive the
CRQ_INIT request due to the irq being freed. This leaved the device
in a inoperable state.

Therefore, the login failure recovery process must be hardened against
these possible issues. Possible failovers (due to quick CRQ free and
init) must be avoided and any issues during re-initialization should be
dealt with instead of being propagated up the stack. This logic is
similar to that of ibmvnic_probe().

Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-5-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ibmvnic: Do partial reset on login failure

Perform a partial reset before sending a login request if any of the
following are true:
1. If a previous request times out. This can be dangerous because the
VIOS could still receive the old login request at any point after
the timeout. Therefore, it is best to re-register the CRQ's and
sub-CRQ's before retrying.
2. If the previous request returns an error that is not described in
PAPR. PAPR provides procedures if the login returns with partial
success or aborted return codes (section L.5.1) but other values
do not have a defined procedure. Previously, these conditions
just returned error from the login function rather than trying
to resolve the issue.
This can cause further issues since most callers of the login
function are not prepared to handle an error when logging in. This
improper cleanup can lead to the device being permanently DOWN'd.
For example, if the VIOS believes that the device is already logged
in then it will return INVALID_STATE (-7). If we never re-register
CRQ's then it will always think that the device is already logged
in. This leaves the device inoperable.

The partial reset involves freeing the sub-CRQs, freeing the CRQ then
registering and initializing a new CRQ and sub-CRQs. This essentially
restarts all communication with VIOS to allow for a fresh login attempt
that will be unhindered by any previous failed attempts.

Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-4-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ibmvnic: Handle DMA unmapping of login buffs in release functions

Rather than leaving the DMA unmapping of the login buffers to the
login response handler, move this work into the login release functions.
Previously, these functions were only used for freeing the allocated
buffers. This could lead to issues if there are more than one
outstanding login buffer requests, which is possible if a login request
times out.

If a login request times out, then there is another call to send login.
The send login function makes a call to the login buffer release
function. In the past, this freed the buffers but did not DMA unmap.
Therefore, the VIOS could still write to the old login (now freed)
buffer. It is for this reason that it is a good idea to leave the DMA
unmap call to the login buffers release function.

Since the login buffer release functions now handle DMA unmapping,
remove the duplicate DMA unmapping in handle_login_rsp().

Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-3-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ibmvnic: Unmap DMA login rsp buffer on send login fail

If the LOGIN CRQ fails to send then we must DMA unmap the response
buffer. Previously, if the CRQ failed then the memory was freed without
DMA unmapping.

Fixes: c98d9cc4170d ("ibmvnic: send_login should check for crq errors")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ibmvnic: Enforce stronger sanity checks on login response

Ensure that all offsets in a login response buffer are within the size
of the allocated response buffer. Any offsets or lengths that surpass
the allocation are likely the result of an incomplete response buffer.
In these cases, a full reset is necessary.

When attempting to login, the ibmvnic device will allocate a response
buffer and pass a reference to the VIOS. The VIOS will then send the
ibmvnic device a LOGIN_RSP CRQ to signal that the buffer has been filled
with data. If the ibmvnic device does not get a response in 20 seconds,
the old buffer is freed and a new login request is sent. With 2
outstanding requests, any LOGIN_RSP CRQ's could be for the older
login request. If this is the case then the login response buffer (which
is for the newer login request) could be incomplete and contain invalid
data. Therefore, we must enforce strict sanity checks on the response
buffer values.

Testing has shown that the `off_rxadd_buff_size` value is filled in last
by the VIOS and will be the smoking gun for these circumstances.

Until VIOS can implement a mechanism for tracking outstanding response
buffers and a method for mapping a LOGIN_RSP CRQ to a particular login
response buffer, the best ibmvnic can do in this situation is perform a
full reset.

Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mana: Fix MANA VF unload when hardware is unresponsive

When unloading the MANA driver, mana_dealloc_queues() waits for the MANA
hardware to complete any inflight packets and set the pending send count
to zero. But if the hardware has failed, mana_dealloc_queues()
could wait forever.

Fix this by adding a timeout to the wait. Set the timeout to 120 seconds,
which is a somewhat arbitrary value that is more than long enough for
functional hardware to complete any sends.

Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: nf_tables: remove busy mark and gc batch API

Ditch it, it has been replace it by the GC transaction API and it has no
clients anymore.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_hash: mark set element as dead when deleting from packet path

Set on the NFT_SET_ELEM_DEAD_BIT flag on this element, instead of
performing element removal which might race with an ongoing transaction.
Enable gc when dynamic flag is set on since dynset deletion requires
garbage collection after this patch.

Fixes: d0a8d877da97 ("netfilter: nft_dynset: support for element deletion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: adapt set backend to use GC transaction API

Use the GC transaction API to replace the old and buggy gc API and the
busy mark approach.

No set elements are removed from async garbage collection anymore,
instead the _DEAD bit is set on so the set element is not visible from
lookup path anymore. Async GC enqueues transaction work that might be
aborted and retried later.

rbtree and pipapo set backends does not set on the _DEAD bit from the
sync GC path since this runs in control plane path where mutex is held.
In this case, set elements are deactivated, removed and then released
via RCU callback, sync GC never fails.

Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: GC transaction API to avoid race with control plane

The set types rhashtable and rbtree use a GC worker to reclaim memory.
From system work queue, in periodic intervals, a scan of the table is
done.

The major caveat here is that the nft transaction mutex is not held.
This causes a race between control plane and GC when they attempt to
delete the same element.

We cannot grab the netlink mutex from the work queue, because the
control plane has to wait for the GC work queue in case the set is to be
removed, so we get following deadlock:

   cpu 1                                cpu2
     GC work                            transaction comes in , lock nft mutex
       `acquire nft mutex // BLOCKS
                                        transaction asks to remove the set
                                        set destruction calls cancel_work_sync()

cancel_work_sync will now block forever, because it is waiting for the
mutex the caller already owns.

This patch adds a new API that deals with garbage collection in two
steps:

1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT
   so they are not visible via lookup. Annotate current GC sequence in
   the GC transaction. Enqueue GC transaction work as soon as it is
   full. If ruleset is updated, then GC transaction is aborted and
   retried later.

2) GC work grabs the mutex. If GC sequence has changed then this GC
   transaction lost race with control plane, abort it as it contains
   stale references to objects and let GC try again later. If the
   ruleset is intact, then this GC transaction deactivates and removes
   the elements and it uses call_rcu() to destroy elements.

Note that no elements are removed from GC lockless path, the _DEAD bit
is set and pointers are collected. GC catchall does not remove the
elements anymore too. There is a new set->dead flag that is set on to
abort the GC transaction to deal with set->ops->destroy() path which
removes the remaining elements in the set from commit_release, where no
mutex is held.

To deal with GC when mutex is held, which allows safe deactivate and
removal, add sync GC API which releases the set element object via
call_rcu(). This is used by rbtree and pipapo backends which also
perform garbage collection from control plane path.

Since element removal from sets can happen from control plane and
element garbage collection/timeout, it is necessary to keep the set
structure alive until all elements have been deactivated and destroyed.

We cannot do a cancel_work_sync or flush_work in nft_set_destroy because
its called with the transaction mutex held, but the aforementioned async
work queue might be blocked on the very mutex that nft_set_destroy()
callchain is sitting on.

This gives us the choice of ABBA deadlock or UaF.

To avoid both, add set->refs refcount_t member. The GC API can then
increment the set refcount and release it once the elements have been
free'd.

Set backends are adapted to use the GC transaction API in a follow up
patch entitled:

  ("netfilter: nf_tables: use gc transaction API in set backends")

This is joint work with Florian Westphal.

Fixes: cfed7e1b1f8e ("netfilter: nf_tables: add set garbage collection helpers")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both also for stable:

   - improve buffer validation when multiple EAs returned

   - missing check for command payload size"

* tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd:
  ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea()
  ksmbd: validate command request size

Merge tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Revert a patch that unconditionally resolved addresses to inlines in
   callchains, something that was done before when DWARF mode was asked
   for, but could as well be done when just frame pointers (the default)
   was selected.

   This enriches the callchains with inlines but the way to resolve it
   is gross right now, relying on addr2line, and even if we come up with
   an efficient way of processing all the associated DWARF info for a
   big file as vmlinux is, this has to be something people opt-in, as it
   will still result in overheads, so revert it until we get this done
   in a saner way.

- Update the x86 msr-index.h header with the kernel original, no change
   in tooling output, just addresses a tools/perf build warning.

  - Resolve a regression where special "tool events", such as
    "duration_time" were being presented for all CPUs, when it only
    makes sense to show it for the workload, that is, just once.

* tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf stat: Don't display zero tool counts
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  Revert "perf report: Append inlines to non-DWARF callchains"

Merge branch 'bug fixes for sockmap'

Xu Kuohai says:

====================
bug fixes and a new test case for sockmap.

v3:
fix bpf ci failure

v2: https://lore.kernel.org/bpf/20230803064838.108784-1-xukuohai@huaweicloud.com
add a test case

v1:
https://lore.kernel.org/bpf/20230728105649.3978774-1-xukuohai@huaweicloud.com
https://lore.kernel.org/bpf/20230728105717.3978849-1-xukuohai@huaweicloud.com
====================

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

selftests/bpf: Add sockmap test for redirecting partial skb data

Add a test case to check whether sockmap redirection works correctly
when data length returned by stream_parser is less than skb->len.

In addition, this test checks whether strp_done is called correctly.
The reason is that we returns skb->len - 1 from the stream_parser, so
the last byte in the skb will be held by strp->skb_head. Therefore,
if strp_done is not called to free strp->skb_head, we'll get a memleak
warning.

Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-5-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

selftests/bpf: fix a CI failure caused by vsock sockmap test

BPF CI has reported the following failure:

Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
  Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
  ./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
  vsock_unix_redir_connectible:FAIL:1506
  ./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected
  vsock_unix_redir_connectible:FAIL:1506
  ./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
  vsock_unix_redir_connectible:FAIL:1506
  ./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11
  vsock_unix_redir_connectible:FAIL:1514
  ./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b
  vsock_unix_redir_connectible:FAIL:1518
  ./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0

It’s because the recv(... MSG_DONTWAIT) syscall in the test case is
called before the queued work sk_psock_backlog() in the kernel finishes
executing. So the data to be read is still queued in psock->ingress_skb
and cannot be read by the user program. Therefore, the non-blocking
recv() reads nothing and reports an EAGAIN error.

So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls
select() to wait for data to be readable or timeout before calls recv().

Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-4-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

bpf, sockmap: Fix bug that strp_done cannot be called

strp_done is only called when psock->progs.stream_parser is not NULL,
but stream_parser was set to NULL by sk_psock_stop_strp(), called
by sk_psock_drop() earlier. So, strp_done can never be called.

Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock.
Change the condition for calling strp_done from judging whether
stream_parser is set to judging whether this flag is set. This flag is
only set once when strp_init() succeeds, and will never be cleared later.

Fixes: c0d95d3380ee ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-3-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

bpf, sockmap: Fix map type error in sock_map_del_link

sock_map_del_link() operates on both SOCKMAP and SOCKHASH, although
both types have member named "progs", the offset of "progs" member in
these two types is different, so "progs" should be accessed with the
real map type.

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-2-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

xsk: fix refcount underflow in error path

Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.

I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport.

Fixes: ba3beec2ec1d ("xsk: Fix possible crash when multiple sockets are created")
Reported-by: syzbot+8ada0057e69293a05fd4@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230809142843.13944-1-magnus.karlsson@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Merge branch 'improve-the-taprio-qdisc-s-relationship-with-its-children'

Vladimir Oltean says:

====================
Improve the taprio qdisc's relationship with its children

v1: https://lore.kernel.org/lkml/20230531173928.1942027-1-vladimir.oltean@nxp.com/

Prompted by Vinicius' request to consolidate some child Qdisc
dereferences in taprio:
https://lore.kernel.org/netdev/87edmxv7x2.fsf@intel.com/

I remembered that I had left some unfinished work in this Qdisc, namely
commit af7b29b1deaa ("Revert "net/sched: taprio: make qdisc_leaf() see
the per-netdev-queue pfifo child qdiscs"").

This patch set represents another stab at, essentially, what's in the
title. Not only does taprio not properly detect when it's grafted as a
non-root qdisc, but it also returns incorrect per-class stats.
Eventually, Vinicius' request is addressed too, although in a different
form than the one he requested (which was purely cosmetic).

Review from people more experienced with Qdiscs than me would be
appreciated. I tried my best to explain what I consider to be problems.
I am deliberately targeting net-next because the changes are too
invasive for net - they were reverted from stable once already.
====================

Link: https://lore.kernel.org/r/20230807193324.4128292-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: verify that a qdisc can be grafted onto a taprio class

The reason behind commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") was that the
patch it reverted caused a crash when attaching a CBS shaper to one of
the taprio classes. Prevent that from happening again by adding a test
case for it, which now passes correctly in both offload and software
modes.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: test that taprio can only be attached as root

Check that the "Can only be attached as root qdisc" error message from
taprio is effective by attempting to attach it to a class of another
taprio qdisc. That operation should fail.

In the bug that was squashed by change "net/sched: taprio: try again to
report q->qdiscs[] to qdisc_leaf()", grafting a child taprio to a root
software taprio would be misinterpreted as a change() to the root
taprio. Catch this by looking at whether the base-time of the root
taprio has changed to follow the base-time of the child taprio,
something which should have absolutely never happened assuming correct
semantics.

Vinicius points out that looking at "base_time" in the tc qdisc show
output is unreliable because user space is in a race with the kernel
applying the setting. So we create a helper bash script which waits
while there is any pending schedule.

Link: https://lore.kernel.org/netdev/87il9w0xx7.fsf@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: add ptp_mock Kconfig dependency

For offloaded tc-taprio testing with netdevsim, the mock-up PHC driver
is used.

Suggested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-10-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: netdevsim: mimic tc-taprio offload

To be able to use netdevsim for tc-testing with an offloaded tc-taprio
schedule, it needs to report a PTP clock (which it now does), and to
accept ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) calls.

Since netdevsim has no packet I/O, this doesn't do anything intelligent,
it only allows taprio offload code paths to go through some level of
automated testing.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: netdevsim: use mock PHC driver

I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc
emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has
a PTP clock, so that it is reasonably capable of offloading the schedule.

By using the mock PHC driver, that becomes possible.

Hardware timestamping is not necessary, and netdevsim does not support
packet I/O anyway.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ptp: create a mock-up PTP Hardware Clock driver

There are several cases where virtual net devices may benefit from
having a PTP clock, and these have to do with testing. I can see at
least netdevsim and veth as potential users of a common mock-up PTP
hardware clock driver.

The proposed idea is to create an object which emulates PTP clock
operations on top of the unadjustable CLOCK_MONOTONIC_RAW plus a
software-controlled time domain via a timecounter/cyclecounter and then
link that PHC to the netdevsim device.

The driver is fully functional for its intended purpose, and it
successfully passes the PTP selftests.

$ cd tools/testing/selftests/ptp/
$ ./phc.sh /dev/ptp2
TEST: settime                          [ OK ]
TEST: adjtime                          [ OK ]
TEST: adjfreq                          [ OK ]

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: taprio: dump class stats for the actual q->qdiscs[]

This makes a difference for the software scheduling mode, where
dev_queue->qdisc_sleeping is the same as the taprio root Qdisc itself,
but when we're talking about what Qdisc and stats get reported for a
traffic class, the root taprio isn't what comes to mind, but q->qdiscs[]
is.

To understand the difference, I've attempted to send 100 packets in
software mode through class 8001:5, and recorded the stats before and
after the change.

Here is before:

$ tc -s class show dev eth0
class taprio 8001:1 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0

and here is after:

class taprio 8001:1 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 800d:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0

The most glaring (and expected) difference is that before, all class
stats reported the global stats, whereas now, they really report just
the counters for that traffic class.

Finally, Pedro Tammela points out that there is a tc selftest which
checks specifically which handle do the child Qdiscs corresponding to
each class have. That's changing here - taprio no longer reports
tcm->tcm_info as the same handle "1:" as itself (the root Qdisc), but 0
(the handle of the default pfifo child Qdiscs). Since iproute2 does not
print a child Qdisc handle of 0, adjust the test's expected output.

Link: https://lore.kernel.org/netdev/3b83fcf6-a5e8-26fb-8c8a-ec34ec4c3342@mojatatu.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: taprio: delete misleading comment about preallocating child qdiscs

As mentioned in commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") - unlike
mqprio, taprio doesn't use q->qdiscs[] only as a temporary transport
between Qdisc_ops :: init() and Qdisc_ops :: attach().

Delete the comment, which is just stolen from mqprio, but there, the
usage patterns are a lot different, and this is nothing but confusing.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: taprio: try again to report q->qdiscs[] to qdisc_leaf()

This is another stab at commit 1461d212ab27 ("net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"), later
reverted in commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"").

I believe that the problems that caused the revert were fixed, and thus,
this change is identical to the original patch.

Its purpose is to properly reject attaching a software taprio child
qdisc to a software taprio parent. Because unoffloaded taprio currently
reports itself (the root Qdisc) as the return value from qdisc_leaf(),
then the process of attaching another taprio as child to a Qdisc class
of the root will just result in a Qdisc_ops :: change() call for the
root. Whereas that's not we want. We want Qdisc_ops :: init() to be
called for the taprio child, in order to give the taprio child a chance
to check whether its sch->parent is TC_H_ROOT or not (and reject this
configuration).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: taprio: keep child Qdisc refcount elevated at 2 in offload mode

Normally, Qdiscs have one reference on them held by their owner and one
held for each TXQ to which they are attached, however this is not the
case with the children of an offloaded taprio. Instead, the taprio qdisc
currently lives in the following fragile equilibrium.

In the software scheduling case, taprio attaches itself (the root Qdisc)
to all TXQs, thus having a refcount of 1 + the number of TX queues. In
this mode, the q->qdiscs[] children are not visible directly to the
Qdisc API. The lifetime of the Qdiscs from this private array lasts
until qdisc_destroy() -> taprio_destroy().

In the fully offloaded case, the root taprio has a refcount of 1, and
all child q->qdiscs[] also have a refcount of 1. The child q->qdiscs[]
are attached to the netdev TXQs directly and thus are visible to the
Qdisc API, however taprio loses a reference to them very early - during
qdisc_graft(parent==NULL) -> taprio_attach(). At that time, taprio frees
the q->qdiscs[] array to not leak memory, but interestingly, it does not
release a reference on these qdiscs because it doesn't effectively own
them - they are created by taprio but owned by the Qdisc core, and will
be freed by qdisc_graft(parent==NULL, new==NULL) -> qdisc_put(old) when
the Qdisc is deleted or when the child Qdisc is replaced with something
else.

My interest is to change this equilibrium such that taprio also owns a
reference on the q->qdiscs[] child Qdiscs for the lifetime of the root
Qdisc, including in full offload mode. I want this because I would like
taprio_leaf(), taprio_dump_class(), taprio_dump_class_stats() to have
insight into q->qdiscs[] for the software scheduling mode - currently
they look at dev_queue->qdisc_sleeping, which is, as mentioned, the same
as the root taprio.

The following set of changes is necessary:
- don't free q->qdiscs[] early in taprio_attach(), free it late in
  taprio_destroy() for consistency with software mode. But:
- currently that's not possible, because taprio doesn't own a reference
  on q->qdiscs[]. So hold that reference - once during the initial
  attach() and once during subsequent graft() calls when the child is
  changed.
- always keep track of the current child in q->qdiscs[], even for full
  offload mode, so that we free in taprio_destroy() what we should, and
  not something stale.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: taprio: don't access q->qdiscs[] in unoffloaded mode during attach()

This is a simple code transformation with no intended behavior change,
just to make it absolutely clear that q->qdiscs[] is only attached to
the child taprio classes in full offload mode.

Right now we use the q->qdiscs[] variable in taprio_attach() for
software mode too, but that is quite confusing and avoidable. We use
it only to reach the netdev TX queue, but we could as well just use
netdev_get_tx_queue() for that.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlx5-expose-nic-temperature-via-hwmon-api'

Saeed Mahameed says:

====================
mlx5: Expose NIC temperature via hwmon API

Expose NIC temperature by implementing hwmon kernel API, which turns
current thermal zone kernel API to redundant.

For each one of the supported and exposed thermal diode sensors, expose
the following attributes:
1) Input temperature.
2) Highest temperature.
3) Temperature label.
4) Temperature critical max value:
   refers to the high threshold of Warning Event. Will be exposed as
   `tempY_crit` hwmon attribute (RO attribute). For example for
   ConnectX5 HCA's this temperature value will be 105 Celsius, 10
   degrees lower than the HW shutdown temperature).
5) Temperature reset history: resets highest temperature.
====================

Link: https://lore.kernel.org/r/20230807180507.22984-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Expose NIC temperature via hardware monitoring kernel API

Expose NIC temperature by implementing hwmon kernel API, which turns
current thermal zone kernel API to redundant.

For each one of the supported and exposed thermal diode sensors, expose
the following attributes:
1) Input temperature.
2) Highest temperature.
3) Temperature label:
   Depends on the firmware capability, if firmware doesn't support
   sensors naming, the fallback naming convention would be: "sensorX",
   where X is the HW spec (MTMP register) sensor index.
4) Temperature critical max value:
   refers to the high threshold of Warning Event. Will be exposed as
   `tempY_crit` hwmon attribute (RO attribute). For example for
   ConnectX5 HCA's this temperature value will be 105 Celsius, 10
   degrees lower than the HW shutdown temperature).
5) Temperature reset history: resets highest temperature.

For example, for dualport ConnectX5 NIC with a single IC thermal diode
sensor will have 2 hwmon directories (one for each PCI function)
under "/sys/class/hwmon/hwmon[X,Y]".

Listing one of the directories above (hwmonX/Y) generates the
corresponding output below:

$ grep -H -d skip . /sys/class/hwmon/hwmon0/*

Output
=======================================================================
/sys/class/hwmon/hwmon0/name:mlx5
/sys/class/hwmon/hwmon0/temp1_crit:105000
/sys/class/hwmon/hwmon0/temp1_highest:48000
/sys/class/hwmon/hwmon0/temp1_input:46000
/sys/class/hwmon/hwmon0/temp1_label:asic
grep: /sys/class/hwmon/hwmon0/temp1_reset_history: Permission denied

In addition, displaying the sensors data via lm_sensors generates the
corresponding output below:

$ sensors

Output
=======================================================================
mlx5-pci-0800
Adapter: PCI adapter
asic:         +46.0°C  (crit = +105.0°C, highest = +48.0°C)

mlx5-pci-0801
Adapter: PCI adapter
asic:         +46.0°C  (crit = +105.0°C, highest = +48.0°C)

CC: Jean Delvare <jdelvare@suse.com>
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807180507.22984-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Expose port.c/mlx5_query_module_num() function

Make mlx5_query_module_num() defined in port.c, a non-static, so it can
be used by other files.

CC: Jean Delvare <jdelvare@suse.com>
CC: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807180507.22984-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: adjust ndisc_is_useropt() to also return true for PIO

The upcoming (and nearly finalized):
https://datatracker.ietf.org/doc/draft-collink-6man-pio-pflag/
will update the IPv6 RA to include a new flag in the PIO field,
which will serve as a hint to perform DHCPv6-PD.

As we don't want DHCPv6 related logic inside the kernel, this piece of
information needs to be exposed to userspace. The simplest option is to
simply expose the entire PIO through the already existing mechanism.

Even without this new flag, the already existing PIO R (router address)
flag (from RFC6275) cannot AFAICT be handled entirely in kernel,
and provides useful information that should be exposed to userspace
(the router's global address, for use by Mobile IPv6).

Also cc'ing stable@ for inclusion in LTS, as while technically this is
not quite a bugfix, and instead more of a feature, it is absolutely
trivial and the alternative is manually cherrypicking into all Android
Common Kernel trees - and I know Greg will ask for it to be sent in via
LTS instead...

Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230807102533.1147559-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/llc/llc_conn.c: fix 4 instances of -Wmissing-variable-declarations

I'm looking to enable -Wmissing-variable-declarations behind W=1. 0day
bot spotted the following instances:

  net/llc/llc_conn.c:44:5: warning: no previous extern declaration for
  non-static variable 'sysctl_llc2_ack_timeout'
  [-Wmissing-variable-declarations]
  44 | int sysctl_llc2_ack_timeout = LLC2_ACK_TIME * HZ;
     |     ^
  net/llc/llc_conn.c:44:1: note: declare 'static' if the variable is not
  intended to be used outside of this translation unit
  44 | int sysctl_llc2_ack_timeout = LLC2_ACK_TIME * HZ;
     | ^
  net/llc/llc_conn.c:45:5: warning: no previous extern declaration for
  non-static variable 'sysctl_llc2_p_timeout'
  [-Wmissing-variable-declarations]
  45 | int sysctl_llc2_p_timeout = LLC2_P_TIME * HZ;
     |     ^
  net/llc/llc_conn.c:45:1: note: declare 'static' if the variable is not
  intended to be used outside of this translation unit
  45 | int sysctl_llc2_p_timeout = LLC2_P_TIME * HZ;
     | ^
  net/llc/llc_conn.c:46:5: warning: no previous extern declaration for
  non-static variable 'sysctl_llc2_rej_timeout'
  [-Wmissing-variable-declarations]
  46 | int sysctl_llc2_rej_timeout = LLC2_REJ_TIME * HZ;
     |     ^
  net/llc/llc_conn.c:46:1: note: declare 'static' if the variable is not
  intended to be used outside of this translation unit
  46 | int sysctl_llc2_rej_timeout = LLC2_REJ_TIME * HZ;
     | ^
  net/llc/llc_conn.c:47:5: warning: no previous extern declaration for
  non-static variable 'sysctl_llc2_busy_timeout'
  [-Wmissing-variable-declarations]
  47 | int sysctl_llc2_busy_timeout = LLC2_BUSY_TIME * HZ;
     |     ^
  net/llc/llc_conn.c:47:1: note: declare 'static' if the variable is not
  intended to be used outside of this translation unit
  47 | int sysctl_llc2_busy_timeout = LLC2_BUSY_TIME * HZ;
     | ^

These symbols are referenced by more than one translation unit, so make
include the correct header for their declarations. Finally, sort the
list of includes to help keep them tidy.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/llvm/202308081000.tTL1ElTr-lkp@intel.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230808-llc_static-v1-1-c140c4c297e4@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: annotate data-races around sock->ops

IPV6_ADDRFORM socket option is evil, because it can change sock->ops
while other threads might read it. Same issue for sk->sk_family
being set to AF_INET.

Adding READ_ONCE() over sock->ops reads is needed for sockets
that might be impacted by IPV6_ADDRFORM.

Note that mptcp_is_tcpsk() can also overwrite sock->ops.

Adding annotations for all sk->sk_family reads will require
more patches :/

BUG: KCSAN: data-race in ____sys_sendmsg / do_ipv6_setsockopt

write to 0xffff888109f24ca0 of 8 bytes by task 4470 on cpu 0:
do_ipv6_setsockopt+0x2c5e/0x2ce0 net/ipv6/ipv6_sockglue.c:491
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
udpv6_setsockopt+0x95/0xa0 net/ipv6/udp.c:1690
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3663
__sys_setsockopt+0x1c3/0x230 net/socket.c:2273
__do_sys_setsockopt net/socket.c:2284 [inline]
__se_sys_setsockopt net/socket.c:2281 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2281
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff888109f24ca0 of 8 bytes by task 4469 on cpu 1:
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x349/0x4c0 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmmsg+0x263/0x500 net/socket.c:2643
__do_sys_sendmmsg net/socket.c:2672 [inline]
__se_sys_sendmmsg net/socket.c:2669 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0xffffffff850e32b8 -> 0xffffffff850da890

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4469 Comm: syz-executor.1 Not tainted 6.4.0-rc5-syzkaller-00313-g4c605260bc60 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230808135809.2300241-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'remove-redundant-functions-and-use-generic-functions'

Li Zetao says:

====================
Remove redundant functions and use generic functions

This patch set removes some redundant functions. In the network module,
two generic functions are provided to convert u64 value and Ethernet
MAC address. Using generic functions helps reduce redundant code and
improve code readability.
====================

Link: https://lore.kernel.org/r/20230808114504.4036008-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-af: Remove redundant functions rvu_npc_exact_mac2u64()

The rvu_npc_exact_mac2u64() is used to convert an Ethernet MAC address
into a u64 value, as this is exactly what ether_addr_to_u64() does.
Use ether_addr_to_u64() to replace the rvu_npc_exact_mac2u64().

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230808114504.4036008-4-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-af: Use u64_to_ether_addr() to convert ethernet address

Use u64_to_ether_addr() to convert a u64 value to an Ethernet MAC address,
instead of directly calculating, as this is exactly what this
function does.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230808114504.4036008-3-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-af: Remove redundant functions mac2u64() and cfg2mac()

The mac2u64() is used to convert an Ethernet MAC address into a u64 value,
as this is exactly what ether_addr_to_u64() does. Similarly, the cfg2mac()
is also the case. Use ether_addr_to_u64() and u64_to_ether_addr() instead
of these two.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230808114504.4036008-2-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlxsw-set-port-stp-state-on-bridge-enslavement'

Petr Machata says:

====================
mlxsw: Set port STP state on bridge enslavement

When the first port joins a LAG that already has a bridge upper, an
instance of struct mlxsw_sp_bridge_port is created for the LAG to keep
track of it as a bridge port. The bridge_port's STP state is initialized to
BR_STATE_DISABLED. This made sense previously, because mlxsw would only
ever allow a port to join a LAG if the LAG had no uppers. Thus if a
bridge_port was instantiated, it must have been because the LAG as such is
joining a bridge, and the STP state is correspondingly disabled.

However as of commit 2c5ffe8d7226 ("mlxsw: spectrum: Permit enslavement to
netdevices with uppers"), mlxsw allows a port to join a LAG that is already
a member of a bridge. The STP state may be different than disabled in that
case. Initialize it properly by querying the actual state.

This bug may cause an issue as traffic on ports attached to a bridged LAG
gets dropped on ingress with discard_ingress_general counter bumped.

The above fix in patch #1. Patch #2 contains a selftest that would
sporadically reproduce the issue.
====================

Link: https://lore.kernel.org/r/cover.1691498735.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mlxsw: router_bridge_lag: Add a new selftest

Add a selftest to verify enslavement to a LAG with upper after fresh
devlink reload.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/373a7754daa4dac32759a45095f47b08a2a869c8.1691498735.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: Set port STP state on bridge enslavement

When the first port joins a LAG that already has a bridge upper, an
instance of struct mlxsw_sp_bridge_port is created for the LAG to keep
track of it as a bridge port. The bridge_port's STP state is initialized to
BR_STATE_DISABLED. This made sense previously, because mlxsw would only
ever allow a port to join a LAG if the LAG had no uppers. Thus if a
bridge_port was instantiated, it must have been because the LAG as such is
joining a bridge, and the STP state is correspondingly disabled.

However as of commit 2c5ffe8d7226 ("mlxsw: spectrum: Permit enslavement to
netdevices with uppers"), mlxsw allows a port to join a LAG that is already
a member of a bridge. The STP state may be different than disabled in that
case. Initialize it properly by querying the actual state.

This bug may cause an issue as traffic on ports attached to a bridged LAG
gets dropped on ingress with discard_ingress_general counter bumped.

Fixes: c6514f3627a0 ("Merge branch 'mlxsw-enslavement'")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/39f4a5781050866b4132f350d7d8cf7ab23ea070.1691498735.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ethernet: s2io: Use ether_addr_to_u64() to convert ethernet address

Use ether_addr_to_u64() to convert an Ethernet address into a u64 value,
instead of directly calculating, as this is exactly what
this function does.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808113849.4033657-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2023-08-09' of git://git./linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
Just a few small updates:
* fix an integer overflow in nl80211
* fix rtw89 8852AE disconnections
* fix a buffer overflow in ath12k
* fix AP_VLAN configuration lookups
* fix allocation failure handling in brcm80211
* update MAINTAINERS for some drivers

* tag 'wireless-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: ath12k: Fix buffer overflow when scanning with extraie
  wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
  wifi: cfg80211: fix sband iftype data lookup for AP_VLAN
  wifi: rtw89: fix 8852AE disconnection caused by RX full flags
  MAINTAINERS: Remove tree entry for rtl8180
  MAINTAINERS: Update entry for rtl8187
  wifi: brcm80211: handle params_v1 allocation failure
====================

Link: https://lore.kernel.org/r/20230809124818.167432-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'selftests-forwarding-various-fixes'

Ido Schimmel says:

====================
selftests: forwarding: Various fixes

Fix various problems with forwarding selftests. See individual patches
for problem description and solution.
====================

Link: https://lore.kernel.org/r/20230808141503.4060661-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: bridge_mdb: Make test more robust

Some test cases check that the group timer is (or isn't) 0. Instead of
grepping for "0.00" grep for " 0.00" as the former can also match
"260.00" which is the default group membership interval.

Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-18-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet

As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.

Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.

Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-17-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: bridge_mdb: Fix failing test with old libnet

As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.

Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.

Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-16-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: tc_flower_l2_miss: Fix failing test with old libnet

As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.

Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.

Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-15-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: tc_tunnel_key: Make filters more specific

The test installs filters that match on various IP fragments (e.g., no
fragment, first fragment) and expects a certain amount of packets to hit
each filter. This is problematic as the filters are not specific enough
and can match IP packets (e.g., IGMP) generated by the stack, resulting
in failures [1].

Fix by making the filters more specific and match on more fields in the
IP header: Source IP, destination IP and protocol.

[1]
# timeout set to 0
# selftests: net/forwarding: tc_tunnel_key.sh
# TEST: tunnel_key nofrag (skip_hw) [FAIL]
# packet smaller than MTU was not tunneled
# INFO: Could not test offloaded functionality
not ok 89 selftests: net/forwarding: tc_tunnel_key.sh # exit=1

Fixes: 533a89b1940f ("selftests: forwarding: add tunnel_key "nofrag" test case")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-14-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: tc_flower: Relax success criterion

The test checks that filters that match on source or destination MAC
were only hit once. A host can send more than one packet with a given
source or destination MAC, resulting in failures.

Fix by relaxing the success criterion and instead check that the filters
were not hit zero times. Using tc_check_at_least_x_packets() is also an
option, but it is not available in older kernels.

Fixes: 07e5c75184a1 ("selftests: forwarding: Introduce tc flower matching tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-13-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: tc_actions: Use ncat instead of nc

The test relies on 'nc' being the netcat version from the nmap project.
While this seems to be the case on Fedora, it is not the case on Ubuntu,
resulting in failures such as [1].

Fix by explicitly using the 'ncat' utility from the nmap project and the
skip the test in case it is not installed.

[1]
# timeout set to 0
# selftests: net/forwarding: tc_actions.sh
# TEST: gact drop and ok (skip_hw)                                    [ OK ]
# TEST: mirred egress flower redirect (skip_hw)                       [ OK ]
# TEST: mirred egress flower mirror (skip_hw)                         [ OK ]
# TEST: mirred egress matchall mirror (skip_hw)                       [ OK ]
# TEST: mirred_egress_to_ingress (skip_hw)                            [ OK ]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
#         [-m minttl] [-O length] [-P proxy_username] [-p source_port]
#         [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
#         [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
#         [destination] [port]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
#         [-m minttl] [-O length] [-P proxy_username] [-p source_port]
#         [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
#         [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
#         [destination] [port]
# TEST: mirred_egress_to_ingress_tcp (skip_hw)                        [FAIL]
#       server output check failed
# INFO: Could not test offloaded functionality
not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1

Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-12-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: ethtool_mm: Skip when MAC Merge is not supported

MAC Merge cannot be tested with veth pairs, resulting in failures:

# ./ethtool_mm.sh
[...]
TEST: Manual configuration with verification: swp1 to swp2 [FAIL]
Verification did not succeed

Fix by skipping the test when the interfaces do not support MAC Merge.

Fixes: e6991384ace5 ("selftests: forwarding: add a test for MAC Merge layer")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-11-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: hw_stats_l3_gre: Skip when using veth pairs

Layer 3 hardware stats cannot be used when the underlying interfaces are
veth pairs, resulting in failures:

# ./hw_stats_l3_gre.sh
TEST: ping gre flat                                                 [ OK ]
TEST: Test rx packets:                                              [FAIL]
         Traffic not reflected in the counter: 0 -> 0
TEST: Test tx packets:                                              [FAIL]
         Traffic not reflected in the counter: 0 -> 0

Fix by skipping the test when used with veth pairs.

Fixes: 813f97a26860 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-10-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: ethtool_extended_state: Skip when using veth pairs

Ethtool extended state cannot be tested with veth pairs, resulting in
failures:

# ./ethtool_extended_state.sh
TEST: Autoneg, No partner detected [FAIL]
Expected "Autoneg", got "Link detected: no"
[...]

Fix by skipping the test when used with veth pairs.

Fixes: 7d10bcce98cd ("selftests: forwarding: Add tests for ethtool extended state")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: ethtool: Skip when using veth pairs

Auto-negotiation cannot be tested with veth pairs, resulting in
failures:

# ./ethtool.sh
TEST: force of same speed autoneg off [FAIL]
error in configuration. swp1 speed Not autoneg off
[...]

Fix by skipping the test when used with veth pairs.

Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: Add a helper to skip test when using veth pairs

A handful of tests require physical loopbacks to be used instead of veth
pairs. Add a helper that these tests will invoke in order to be skipped
when executed with veth pairs.

Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: Set default IPv6 traceroute utility

The test uses the 'TROUTE6' environment variable to encode the name of
the IPv6 traceroute utility. By default (without a configuration file),
this variable is not set, resulting in failures:

# ./ip6_forward_instats_vrf.sh
TEST: ping6                                                         [ OK ]
TEST: Ip6InTooBigErrors                                             [ OK ]
TEST: Ip6InHdrErrors                                                [FAIL]
TEST: Ip6InAddrErrors                                               [ OK ]
TEST: Ip6InDiscards                                                 [ OK ]

Fix by setting a default utility name and skip the test if the utility
is not present.

Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: bridge_mdb_max: Check iproute2 version

The selftest relies on iproute2 changes present in version 6.3, but the
test does not check for it, resulting in errors:

# ./bridge_mdb_max.sh
  INFO: 802.1d tests
  TEST: cfg4: port: ngroups reporting                                 [FAIL]
          Number of groups was null, now is null, but 5 expected
  TEST: ctl4: port: ngroups reporting                                 [FAIL]
          Number of groups was null, now is null, but 5 expected
  TEST: cfg6: port: ngroups reporting                                 [FAIL]
          Number of groups was null, now is null, but 5 expected
  [...]

Fix by skipping the test if iproute2 is too old.

Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: bridge_mdb: Check iproute2 version

The selftest relies on iproute2 changes present in version 6.3, but the
test does not check for it, resulting in error:

# ./bridge_mdb.sh

INFO: # Host entries configuration tests
TEST: Common host entries configuration tests (IPv4)                [FAIL]
         Managed to add IPv4 host entry with a filter mode
TEST: Common host entries configuration tests (IPv6)                [FAIL]
         Managed to add IPv6 host entry with a filter mode
TEST: Common host entries configuration tests (L2)                  [FAIL]
         Managed to add L2 host entry with a filter mode

INFO: # Port group entries configuration tests - (*, G)
Command "replace" is unknown, try "bridge mdb help".
[...]

Fix by skipping the test if iproute2 is too old.

Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: Switch off timeout

The default timeout for selftests is 45 seconds, but it is not enough
for forwarding selftests which can takes minutes to finish depending on
the number of tests cases:

# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# TEST: IGMPv2 report 239.10.10.10                                    [ OK ]
# TEST: IGMPv2 leave 239.10.10.10                                     [ OK ]
# TEST: IGMPv3 report 239.10.10.10 is_include                         [ OK ]
# TEST: IGMPv3 report 239.10.10.10 include -> allow                   [ OK ]
#
not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds

Fix by switching off the timeout and setting it to 0. A similar change
was done for BPF selftests in commit 6fc5916cc256 ("selftests: bpf:
Switch off timeout").

Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/8d149f8c-818e-d141-a0ce-a6bae606bc22@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: Skip test when no interfaces are specified

As explained in [1], the forwarding selftests are meant to be run with
either physical loopbacks or veth pairs. The interfaces are expected to
be specified in a user-provided forwarding.config file or as command
line arguments. By default, this file is not present and the tests fail:

# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
[...]
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# Command line is not complete. Try option "help"
# Failed to create netif
not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1
[...]

Fix by skipping a test if interfaces are not provided either via the
configuration file or command line arguments.

# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
[...]
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# SKIP: Cannot create interface. Name not specified
ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP

[1] tools/testing/selftests/net/forwarding/README

Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/856d454e-f83c-20cf-e166-6dc06cbc1543@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nf-next-2023-08-08' of https://git./linux/kernel/git/netfilter/nf-next

Florian Westphal says:

====================
netfilter updates for net-next

First 4 Patches, from Yue Haibing, remove unused prototypes in
various netfilter headers.

Last patch makes nfnetlink_log to always include a packet timestamp,
up to now it was only included if the skb had assigned previously.
From Maciej Żenczykowski.

* tag 'nf-next-2023-08-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: nfnetlink_log: always add a timestamp
  netfilter: h323: Remove unused function declarations
  netfilter: conntrack: Remove unused function declarations
  netfilter: helper: Remove unused function declarations
  netfilter: gre: Remove unused function declaration nf_ct_gre_keymap_flush()
====================

Link: https://lore.kernel.org/r/20230808124159.19046-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: add missing family to tcp_set_ca_state() tracepoint

Before this code is copied, add the missing family, as we did in
commit 3dd344ea84e1 ("net: tracepoint: exposing sk_family in all tcp:tracepoints")

Fixes: 15fcdf6ae116 ("tcp: Add tracepoint for tcp_set_ca_state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ping Gan <jacky_gam_2001@163.com>
Cc: Manjusaka <me@manjusaka.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808084923.2239142-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'nexthop-nexthop-dump-fixes'

Ido Schimmel says:

====================
nexthop: Nexthop dump fixes

Patches #1 and #3 fix two problems related to nexthops and nexthop
buckets dump, respectively. Patch #2 is a preparation for the third
patch.

The pattern described in these patches of splitting the NLMSG_DONE to a
separate response is prevalent in other rtnetlink dump callbacks. I
don't know if it's because I'm missing something or if this was done
intentionally to ensure the message is delivered to user space. After
commit 0642840b8bb0 ("af_netlink: ensure that NLMSG_DONE never fails in
dumps") this is no longer necessary and I can improve these dump
callbacks assuming this analysis is correct.

No regressions in existing tests:

# ./fib_nexthops.sh
[...]
Tests passed: 230
Tests failed: 0
====================

Link: https://lore.kernel.org/r/20230808075233.3337922-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nexthop: Fix infinite nexthop bucket dump when using maximum nexthop ID

A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.

The nexthop bucket dump callback always returns a positive number if
nexthop buckets were filled in the provided skb, even if the dump is
complete. This means that a dump will span at least two recvmsg() calls
as long as nexthop buckets are present. In the last recvmsg() call the
dump callback will not fill in any nexthop buckets because the previous
call indicated that the dump should restart from the last dumped nexthop
ID plus one.

# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
id 10 index 0 idle_time 6.66 nhid 1
id 10 index 1 idle_time 6.66 nhid 1
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++

This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:

# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# ip nexthop bucket
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
[...]

Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses:

# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
id 4294967295 index 0 idle_time 6.61 nhid 1
id 4294967295 index 1 idle_time 6.61 nhid 1
+++ exited with 0 +++

Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.

Add a test that fails before the fix:

# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]

And passes after it:

# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]

Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nexthop: Make nexthop bucket dump more efficient

rtm_dump_nexthop_bucket_nh() is used to dump nexthop buckets belonging
to a specific resilient nexthop group. The function returns a positive
return code (the skb length) upon both success and failure.

The above behavior is problematic. When a complete nexthop bucket dump
is requested, the function that walks the different nexthops treats the
non-zero return code as an error. This causes buckets belonging to
different resilient nexthop groups to be dumped using different buffers
even if they can all fit in the same buffer:

# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 1
# ip nexthop add id 20 group 1 type resilient buckets 1
# strace -e recvmsg -s 0 ip nexthop bucket
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64
id 10 index 0 idle_time 10.27 nhid 1
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64
id 20 index 0 idle_time 6.44 nhid 1
[...]

Fix by only returning a non-zero return code when an error occurred and
restarting the dump from the bucket index we failed to fill in. This
allows buckets belonging to different resilient nexthop groups to be
dumped using the same buffer:

# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 1
# ip nexthop add id 20 group 1 type resilient buckets 1
# strace -e recvmsg -s 0 ip nexthop bucket
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
id 10 index 0 idle_time 30.21 nhid 1
id 20 index 0 idle_time 26.7 nhid 1
[...]

While this change is more of a performance improvement change than an
actual bug fix, it is a prerequisite for a subsequent patch that does
fix a bug.

Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nexthop: Fix infinite nexthop dump when using maximum nexthop ID

A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.

The nexthop dump callback always returns a positive number if nexthops
were filled in the provided skb, even if the dump is complete. This
means that a dump will span at least two recvmsg() calls as long as
nexthops are present. In the last recvmsg() call the dump callback will
not fill in any nexthops because the previous call indicated that the
dump should restart from the last dumped nexthop ID plus one.

# ip nexthop add id 1 blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36
id 1 blackhole
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++

This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:

# ip nexthop add id $((2**32-1)) blackhole
# ip nexthop
id 4294967295 blackhole
id 4294967295 blackhole
[...]

Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response:

# ip nexthop add id $((2**32-1)) blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56
id 4294967295 blackhole
+++ exited with 0 +++

Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.

Add a test that fails before the fix:

# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]

And passes after it:

# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]

Fixes: ab84be7e54fc ("net: Initial nexthop code")
Reported-by: Petr Machata <petrm@nvidia.com>
Closes: https://lore.kernel.org/netdev/87sf91enuf.fsf@nvidia.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vlan: Fix VLAN 0 memory leak

The referenced commit intended to fix memleak of VLAN 0 that is implicitly
created on devices with NETIF_F_HW_VLAN_CTAG_FILTER feature. However, it
doesn't take into account that the feature can be re-set during the
netdevice lifetime which will cause memory leak if feature is disabled
during the device deletion as illustrated by [0]. Fix the leak by
unconditionally deleting VLAN 0 on NETDEV_DOWN event.

[0]:
> modprobe 8021q
> ip l set dev eth2 up
> ethtool -K eth2 rx-vlan-filter off
> modprobe -r mlx5_ib
> modprobe -r mlx5_core
> cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888103dcd900 (size 256):
  comm "ip", pid 1490, jiffies 4294907305 (age 325.364s)
  hex dump (first 32 bytes):
    00 80 5d 03 81 88 ff ff 00 00 00 00 00 00 00 00  ..].............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000899f3bb9>] kmalloc_trace+0x25/0x80
    [<000000002889a7a2>] vlan_vid_add+0xa0/0x210
    [<000000007177800e>] vlan_device_event+0x374/0x760 [8021q]
    [<000000009a0716b1>] notifier_call_chain+0x35/0xb0
    [<00000000bbf3d162>] __dev_notify_flags+0x58/0xf0
    [<0000000053d2b05d>] dev_change_flags+0x4d/0x60
    [<00000000982807e9>] do_setlink+0x28d/0x10a0
    [<0000000058c1be00>] __rtnl_newlink+0x545/0x980
    [<00000000e66c3bd9>] rtnl_newlink+0x44/0x70
    [<00000000a2cc5970>] rtnetlink_rcv_msg+0x29c/0x390
    [<00000000d307d1e4>] netlink_rcv_skb+0x54/0x100
    [<00000000259d16f9>] netlink_unicast+0x1f6/0x2c0
    [<000000007ce2afa1>] netlink_sendmsg+0x232/0x4a0
    [<00000000f3f4bb39>] sock_sendmsg+0x38/0x60
    [<000000002f9c0624>] ____sys_sendmsg+0x1e3/0x200
    [<00000000d6ff5520>] ___sys_sendmsg+0x80/0xc0
unreferenced object 0xffff88813354fde0 (size 32):
  comm "ip", pid 1490, jiffies 4294907305 (age 325.364s)
  hex dump (first 32 bytes):
    a0 d9 dc 03 81 88 ff ff a0 d9 dc 03 81 88 ff ff  ................
    81 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000899f3bb9>] kmalloc_trace+0x25/0x80
    [<000000002da64724>] vlan_vid_add+0xdf/0x210
    [<000000007177800e>] vlan_device_event+0x374/0x760 [8021q]
    [<000000009a0716b1>] notifier_call_chain+0x35/0xb0
    [<00000000bbf3d162>] __dev_notify_flags+0x58/0xf0
    [<0000000053d2b05d>] dev_change_flags+0x4d/0x60
    [<00000000982807e9>] do_setlink+0x28d/0x10a0
    [<0000000058c1be00>] __rtnl_newlink+0x545/0x980
    [<00000000e66c3bd9>] rtnl_newlink+0x44/0x70
    [<00000000a2cc5970>] rtnetlink_rcv_msg+0x29c/0x390
    [<00000000d307d1e4>] netlink_rcv_skb+0x54/0x100
    [<00000000259d16f9>] netlink_unicast+0x1f6/0x2c0
    [<000000007ce2afa1>] netlink_sendmsg+0x232/0x4a0
    [<00000000f3f4bb39>] sock_sendmsg+0x38/0x60
    [<000000002f9c0624>] ____sys_sendmsg+0x1e3/0x200
    [<00000000d6ff5520>] ___sys_sendmsg+0x80/0xc0

Fixes: efc73f4bbc23 ("net: Fix memory leak - vlan_info struct")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20230808093521.1468929-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: spectrum_switchdev: Use is_zero_ether_addr() instead of ether_addr_equal()

Use is_zero_ether_addr() instead of ether_addr_equal()
to check if the ethernet address is all zeros.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230808133528.4083501-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools: ynl-gen: add missing empty line between policies

We're missing empty line between policies.
DPLL will need this.

Tested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20230808200907.1290647-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: switchdev: Remove unused declaration switchdev_port_fwd_mark_set()

Commit 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices")
removed the implementation but leave declaration.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230808145955.2176-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxbf_gige: Remove two unused function declarations

Commit f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
declared but never implemented these.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Link: https://lore.kernel.org/r/20230808145249.41596-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: Remove two unused function declarations

Commit 1e2dc14509fd ("net: ethtool: Add helpers for reporting test results")
declared but never implemented these function.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230808144610.19096-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mark parsed interface mode for legacy switch drivers

If we successfully parsed an interface mode with a legacy switch
driver, populate that mode into phylink's supported interfaces rather
than defaulting to the internal and gmii interfaces.

This hasn't caused an issue so far, because when the interface doesn't
match a supported one, phylink_validate() doesn't clear the supported
mask, but instead returns -EINVAL. phylink_parse_fixedlink() doesn't
check this return value, and merely relies on the supported ethtool
link modes mask being cleared. Therefore, the fixed link settings end
up being allowed despite validation failing.

Before this causes a problem, arrange for DSA to more accurately
populate phylink's supported interfaces mask so validation can
correctly succeed.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1qTKdM-003Cpx-Eh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: clear flag on port register error path

When xarray insertion fails, clear the flag.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808082020.1363497-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools: ynl-gen: avoid rendering empty validate field

When dont-validate flags are filtered out for do/dump op, the list may
be empty. In that case, avoid rendering the validate field.

Fixes: fa8ba3502ade ("ynl-gen-c.py: render netlink policies static for split ops")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230808090344.1368874-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: txgbe: Use pci_dev_id() to simplify the code

PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808024931.147048-1-wangxiongfeng2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bcm63xx_enet: Remove redundant initialization owner

The platform_register_drivers() will set "THIS_MODULE" to driver.owner when
register a platform_driver driver, so it is redundant initialization to set
driver.owner in the statement. Remove it for clean code.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230808014702.2712699-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tipc: Remove unused declaration tipc_link_build_bc_sync_msg()

Commit 526669866140 ("tipc: let broadcast packet reception use new link receive function")
declared but never implemented this.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807142926.45752-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tpm: Add a helper for checking hwrng enabled

The same checks are repeated in three places to decide whether to use
hwrng. Consolidate these into a helper.

Also this fixes a case that one of them was missing a check in the
cleanup path.

Fixes: 554b841d4703 ("tpm: Disable RNG for all AMD fTPMs")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: Fix access_remote_vm() regression on tagged addresses

GDB uses /proc/PID/mem to access memory of the target process. GDB
doesn't untag addresses manually, but relies on kernel to do the right
thing.

mem_rw() of procfs uses access_remote_vm() to get data from the target
process. It worked fine until recent changes in __access_remote_vm()
that now checks if there's VMA at target address using raw address.

Untag the address before looking up the VMA.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Christina Schimpe <christina.schimpe@intel.com>
Fixes: eee9c708cc89 ("gup: avoid stack expansion warning for known-good case")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/CPU/AMD: Do not leak quotient data after a division by 0

Under certain circumstances, an integer division by 0 which faults, can
leave stale quotient data from a previous division operation on Zen1
microarchitectures.

Do a dummy division 0/1 before returning from the #DE exception handler
in order to avoid any leaks of potentially sensitive data.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

wifi: ath12k: Fix buffer overflow when scanning with extraie

If cfg80211 is providing extraie's for a scanning process then ath12k will
copy that over to the firmware. The extraie.len is a 32 bit value in struct
element_info and describes the amount of bytes for the vendor information
elements.

The problem is the allocation of the buffer. It has to align the TLV
sections by 4 bytes. But the code was using an u8 to store the newly
calculated length of this section (with alignment). And the new
calculated length was then used to allocate the skbuff. But the actual
code to copy in the data is using the extraie.len and not the calculated
"aligned" length.

The length of extraie with IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS enabled
was 264 bytes during tests with a wifi card. But it only allocated 8
bytes (264 bytes % 256) for it. As consequence, the code to memcpy the
extraie into the skb was then just overwriting data after skb->end. Things
like shinfo were therefore corrupted. This could usually be seen by a crash
in skb_zcopy_clear which tried to call a ubuf_info callback (using a bogus
address).

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230809081241.32765-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()

nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count the
number of MBSSID elements in the nested netlink attribute attrs, which can
lead to an integer overflow if a user of the nl80211 interface specifies
256 or more elements in the corresponding attribute in userspace. The
integer overflow can lead to a heap buffer overflow as num_elems determines
the size of the trailing array in elems, and this array is thereafter
written to for each element in attrs.

Note that this vulnerability only affects devices with the
wiphy->mbssid_max_interfaces member set for the wireless physical device
struct in the device driver, and can only be triggered by a process with
CAP_NET_ADMIN capabilities.

Fix this by checking for a maximum of 255 elements in attrs.

Cc: stable@vger.kernel.org
Fixes: dc1e3cb8da8b ("nl80211: MBSSID and EMA support in AP mode")
Signed-off-by: Keith Yeo <keithyjy@gmail.com>
Link: https://lore.kernel.org/r/20230731034719.77206-1-keithyjy@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

netfilter: nf_tables: don't skip expired elements during walk

There is an asymmetry between commit/abort and preparation phase if the
following conditions are met:

1. set is a verdict map ("1.2.3.4 : jump foo")
2. timeouts are enabled

In this case, following sequence is problematic:

1. element E in set S refers to chain C
2. userspace requests removal of set S
3. kernel does a set walk to decrement chain->use count for all elements
   from preparation phase
4. kernel does another set walk to remove elements from the commit phase
   (or another walk to do a chain->use increment for all elements from
    abort phase)

If E has already expired in 1), it will be ignored during list walk, so its use count
won't have been changed.

Then, when set is culled, ->destroy callback will zap the element via
nf_tables_set_elem_destroy(), but this function is only safe for
elements that have been deactivated earlier from the preparation phase:
lack of earlier deactivate removes the element but leaks the chain use
count, which results in a WARN splat when the chain gets removed later,
plus a leak of the nft_chain structure.

Update pipapo_get() not to skip expired elements, otherwise flush
command reports bogus ENOENT errors.

Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

net: dsa: mt7530: improve and relax PHY driver dependency

Different MT7530 variants require different PHY drivers.
Use 'imply' instead of 'select' to relax the dependency on the PHY
driver, and choose the appropriate driver.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'smc-fixes'

Gerd Bayer says:

====================
net/smc: Fix effective buffer size

commit 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock
and make them tunable") started to derive the effective buffer size for
SMC connections inconsistently in case a TCP fallback was used and
memory consumption of SMC with the default settings was doubled when
a connection negotiated SMC. That was not what we want.

This series consolidates the resulting effective buffer size that is
used with SMC sockets, which is based on Jan Karcher's effort (see
[1]). For all TCP exchanges (in particular in case of a fall back when
no SMC connection was possible) the values from net.ipv4.tcp_[rw]mem
are used. If SMC succeeds in establishing a SMC connection, the newly
introduced values from net.smc.[rw]mem are used.

net.smc.[rw]mem is initialized to 64kB, respectively. Internal test
have show this to be a good compromise between throughput/latency
and memory consumption. Also net.smc.[rw]mem is now decoupled completely
from any tuning through net.ipv4.tcp_[rw]mem.

If a user chose to tune a socket's receive or send buffer size with
setsockopt, this tuning is now consistently applied to either fall-back
TCP or proper SMC connections over the socket.

Thanks,
Gerd

v2 - v3:
- Rebase to and resolve conflict of second patch with latest net/master.
v1 - v2:
- In second patch, use sock_net() helper as suggested by Tony and demanded
by kernel test robot.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: Use correct buffer sizes when switching between TCP and SMC

Tuning of the effective buffer size through setsockopts was working for
SMC traffic only but not for TCP fall-back connections even before
commit 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and
make them tunable"). That change made it apparent that TCP fall-back
connections would use net.smc.[rw]mem as buffer size instead of
net.ipv4_tcp_[rw]mem.

Amend the code that copies attributes between the (TCP) clcsock and the
SMC socket and adjust buffer sizes appropriately:
- Copy over sk_userlocks so that both sockets agree on whether tuning
  via setsockopt is active.
- When falling back to TCP use sk_sndbuf or sk_rcvbuf as specified with
  setsockopt. Otherwise, use the sysctl value for TCP/IPv4.
- Likewise, use either values from setsockopt or from sysctl for SMC
  (duplicated) on successful SMC connect.

In smc_tcp_listen_work() drop the explicit copy of buffer sizes as that
is taken care of by the attribute copy.

Fixes: 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable")
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: Fix setsockopt and sysctl to specify same buffer size again

Commit 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock
and make them tunable") introduced the net.smc.rmem and net.smc.wmem
sysctls to specify the size of buffers to be used for SMC type
connections. This created a regression for users that specified the
buffer size via setsockopt() as the effective buffer size was now
doubled.

Re-introduce the division by 2 in the SMC buffer create code and level
this out by duplicating the net.smc.[rw]mem values used for initializing
sk_rcvbuf/sk_sndbuf at socket creation time. This gives users of both
methods (setsockopt or sysctl) the effective buffer size that they
expect.

Initialize net.smc.[rw]mem from its own constant of 64kB, respectively.
Internal performance tests show that this value is a good compromise
between throughput/latency and memory consumption. Also, this decouples
it from any tuning that was done to net.ipv4.tcp_[rw]mem[1] before the
module for SMC protocol was loaded. Check that no more than INT_MAX / 2
is assigned to net.smc.[rw]mem, in order to avoid any overflow condition
when that is doubled for use in sk_sndbuf or sk_rcvbuf.

While at it, drop the confusing sk_buf_size variable from
__smc_buf_create and name "compressed" buffer size variables more
consistently.

Background:

Before the commit mentioned above, SMC's buffer allocator in
__smc_buf_create() always used half of the sockets' sk_rcvbuf/sk_sndbuf
value as initial value to search for appropriate buffers. If the search
resorted to using a bigger buffer when all buffers of the specified
size were busy, the duplicate of the used effective buffer size is
stored back to sk_rcvbuf/sk_sndbuf.

When available, buffers of exactly the size that a user had specified as
input to setsockopt() were used, despite setsockopt()'s documentation in
"man 7 socket" talking of a mandatory duplication:

[...]
       SO_SNDBUF
              Sets  or  gets the maximum socket send buffer in bytes.
              The kernel doubles this value (to allow space for book‐
              keeping  overhead)  when it is set using setsockopt(2),
              and this doubled value is  returned  by  getsockopt(2).
              The     default     value     is     set     by     the
              /proc/sys/net/core/wmem_default file  and  the  maximum
              allowed value is set by the /proc/sys/net/core/wmem_max
              file.  The minimum (doubled) value for this  option  is
              2048.
[...]

Fixes: 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable")
Co-developed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Jan Karcher <jaka@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sfc-conntrack-offload'

Edward Cree says:

====================
sfc: basic conntrack offload

Support offloading tracked connections and matching against them in
TC chains on the PF and on representors.
Later patch serieses will add NAT and conntrack-on-tunnel-netdevs;
keep it simple for now.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: offload left-hand side rules for conntrack

Handle the (comparatively) simple case of a -trk rule on an efx netdev
(i.e. not a tunnel decap rule) with ct and goto chain actions.

Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>