Ajit Kumar Pandey [Tue, 26 Apr 2022 18:33:57 +0000 (13:33 -0500)]
ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback
[ Upstream commit
c61711c1c95791850be48dd65a1d72eb34ba719f ]
We are accessing "desc->ops" in sof_pci_probe without checking "desc"
pointer. This results in NULL pointer exception if pci_id->driver_data
i.e desc pointer isn't defined in sof device probe:
BUG: kernel NULL pointer dereference, address:
0000000000000060
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:sof_pci_probe+0x1e/0x17f [snd_sof_pci]
Code: Unable to access opcode bytes at RIP 0xffffffffc043dff4.
RSP: 0018:
ffffac4b03b9b8d8 EFLAGS:
00010246
Add NULL pointer check for sof_dev_desc pointer to avoid such exception.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220426183357.102155-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Schnelle [Mon, 25 Apr 2022 12:17:42 +0000 (14:17 +0200)]
s390: disable -Warray-bounds
[ Upstream commit
8b202ee218395319aec1ef44f72043e1fbaccdd6 ]
gcc-12 shows a lot of array bound warnings on s390. This is caused
by the S390_lowcore macro which uses a hardcoded address of 0.
Wrapping that with absolute_pointer() works, but gcc no longer knows
that a 12 bit displacement is sufficient to access lowcore. So it
emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a
single load/store instruction. As s390 stores variables often
read/written in lowcore, this is considered problematic. Therefore
disable -Warray-bounds on s390 for gcc-12 for the time being, until
there is a better solution.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/yt9dzgkelelc.fsf@linux.ibm.com
Link: https://lore.kernel.org/r/20220422134308.1613610-1-svens@linux.ibm.com
Link: https://lore.kernel.org/r/20220425121742.3222133-1-svens@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Sat, 23 Apr 2022 13:12:39 +0000 (14:12 +0100)]
ASoC: ops: Validate input values in snd_soc_put_volsw_range()
[ Upstream commit
aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ]
Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Wed, 20 Apr 2022 19:34:54 +0000 (20:34 +0100)]
ASoC: max98090: Generate notifications on changes for custom control
[ Upstream commit
13fcf676d9e102594effc686d98521ff5c90b925 ]
The max98090 driver has some custom controls which share a put() function
which returns 0 unconditionally, meaning that events are not generated
when the value changes. Fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Wed, 20 Apr 2022 19:34:53 +0000 (20:34 +0100)]
ASoC: max98090: Reject invalid values in custom control put()
[ Upstream commit
2fbe467bcbfc760a08f08475eea6bbd4c2874319 ]
The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ashish Mhetre [Thu, 21 Apr 2022 08:15:04 +0000 (13:45 +0530)]
iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu
[ Upstream commit
4a25f2ea0e030b2fc852c4059a50181bfc5b2f57 ]
Tegra194 and Tegra234 SoCs have the erratum that causes walk cache
entries to not be invalidated correctly. The problem is that the walk
cache index generated for IOVA is not same across translation and
invalidation requests. This is leading to page faults when PMD entry is
released during unmap and populated with new PTE table during subsequent
map request. Disabling large page mappings avoids the release of PMD
entry and avoid translations seeing stale PMD entry in walk cache.
Fix this by limiting the page mappings to PAGE_SIZE for Tegra194 and
Tegra234 devices. This is recommended fix from Tegra hardware design
team.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
Co-developed-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://lore.kernel.org/r/20220421081504.24678-1-amhetre@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Duoming Zhou [Mon, 18 Apr 2022 15:33:22 +0000 (23:33 +0800)]
RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core()
[ Upstream commit
679ab61bf5f5f519377d812afb4fb93634782c74 ]
There is a deadlock in irdma_cleanup_cm_core(), which is shown below:
(Thread 1) | (Thread 2)
| irdma_schedule_cm_timer()
irdma_cleanup_cm_core() | add_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | irdma_cm_timer_tick()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold cm_core->ht_lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler also need
cm_core->ht_lock in position (2) of thread 2. As a result,
irdma_cleanup_cm_core() will block forever.
This patch removes the check of timer_pending() in
irdma_cleanup_cm_core(), because the del_timer_sync() function will just
return directly if there isn't a pending timer. As a result, the lock is
redundant, because there is no resource it could protect.
Link: https://lore.kernel.org/r/20220418153322.42524-1-duoming@zju.edu.cn
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ji-Ze Hong (Peter Hong) [Mon, 18 Apr 2022 09:07:06 +0000 (17:07 +0800)]
hwmon: (f71882fg) Fix negative temperature
[ Upstream commit
4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ]
All temperature of Fintek superio hwmonitor that using 1-byte reg will use
2's complement.
In show_temp()
temp = data->temp[nr] * 1000;
When data->temp[nr] read as 255, it indicate -1C, but this code will report
255C to userspace. It'll be ok when change to:
temp = ((s8)data->temp[nr]) * 1000;
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Thu, 14 Apr 2022 15:52:39 +0000 (17:52 +0200)]
gfs2: Fix filesystem block deallocation for short writes
[ Upstream commit
d031a8866e709c9d1ee5537a321b6192b4d2dc5b ]
When a write cannot be carried out in full, gfs2_iomap_end() releases
blocks that have been allocated for this write but haven't been used.
To compute the end of the allocation, gfs2_iomap_end() incorrectly
rounded the end of the attempted write down to the next block boundary
to arrive at the end of the allocation. It would have to round up, but
the end of the allocation is also available as iomap->offset +
iomap->length, so just use that instead.
In addition, use round_up() for computing the start of the unused range.
Fixes:
64bc06bb32ee ("gfs2: iomap buffered write support")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zack Rusin [Wed, 2 Mar 2022 15:24:22 +0000 (10:24 -0500)]
drm/vmwgfx: Fix fencing on SVGAv3
[ Upstream commit
1d6595b4cd47acfd824550f48f10b54a6f0e93ee ]
Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed
FIFO's and replaced them with command buffers and extra registers.
The initial version of SVGAv3 lacked support for most advanced features
(e.g. 3D) which made fences unnecessary. That is no longer the case,
especially as 3D support is being turned on.
Switch from FIFO commands and capabilities to command buffers and extra
registers to enable fences on SVGAv3.
Fixes:
2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-5-zack@kde.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxim Mikityanskiy [Thu, 12 May 2022 09:18:30 +0000 (12:18 +0300)]
tls: Fix context leak on tls_device_down
[ Upstream commit
3740651bf7e200109dd42d5b2fb22226b26f960a ]
The commit cited below claims to fix a use-after-free condition after
tls_device_down. Apparently, the description wasn't fully accurate. The
context stayed alive, but ctx->netdev became NULL, and the offload was
torn down without a proper fallback, so a bug was present, but a
different kind of bug.
Due to misunderstanding of the issue, the original patch dropped the
refcount_dec_and_test line for the context to avoid the alleged
premature deallocation. That line has to be restored, because it matches
the refcount_inc_not_zero from the same function, otherwise the contexts
that survived tls_device_down are leaked.
This patch fixes the described issue by restoring refcount_dec_and_test.
After this change, there is no leak anymore, and the fallback to
software kTLS still works.
Fixes:
c55dcdd435aa ("net/tls: Fix use-after-free after the TLS device goes down and up")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220512091830.678684-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taehee Yoo [Thu, 12 May 2022 05:47:09 +0000 (05:47 +0000)]
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
[ Upstream commit
1fa89ffbc04545b7582518e57f4b63e2a062870f ]
In the NIC ->probe() callback, ->mtd_probe() callback is called.
If NIC has 2 ports, ->probe() is called twice and ->mtd_probe() too.
In the ->mtd_probe(), which is efx_ef10_mtd_probe() it allocates and
initializes mtd partiion.
But mtd partition for sfc is shared data.
So that allocated mtd partition data from last called
efx_ef10_mtd_probe() will not be used.
Therefore it must be freed.
But it doesn't free a not used mtd partition data in efx_ef10_mtd_probe().
kmemleak reports:
unreferenced object 0xffff88811ddb0000 (size 63168):
comm "systemd-udevd", pid 265, jiffies
4294681048 (age 348.586s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffffffffa3767749>] kmalloc_order_trace+0x19/0x120
[<
ffffffffa3873f0e>] __kmalloc+0x20e/0x250
[<
ffffffffc041389f>] efx_ef10_mtd_probe+0x11f/0x270 [sfc]
[<
ffffffffc0484c8a>] efx_pci_probe.cold.17+0x3df/0x53d [sfc]
[<
ffffffffa414192c>] local_pci_probe+0xdc/0x170
[<
ffffffffa4145df5>] pci_device_probe+0x235/0x680
[<
ffffffffa443dd52>] really_probe+0x1c2/0x8f0
[<
ffffffffa443e72b>] __driver_probe_device+0x2ab/0x460
[<
ffffffffa443e92a>] driver_probe_device+0x4a/0x120
[<
ffffffffa443f2ae>] __driver_attach+0x16e/0x320
[<
ffffffffa4437a90>] bus_for_each_dev+0x110/0x190
[<
ffffffffa443b75e>] bus_add_driver+0x39e/0x560
[<
ffffffffa4440b1e>] driver_register+0x18e/0x310
[<
ffffffffc02e2055>] 0xffffffffc02e2055
[<
ffffffffa3001af3>] do_one_initcall+0xc3/0x450
[<
ffffffffa33ca574>] do_init_module+0x1b4/0x700
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Fixes:
8127d661e77f ("sfc: Add support for Solarflare SFC9100 family")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220512054709.12513-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guangguan Wang [Thu, 12 May 2022 03:08:20 +0000 (11:08 +0800)]
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
[ Upstream commit
f3c46e41b32b6266cf60b0985c61748f53bf1c61 ]
Non blocking sendmsg will return -EAGAIN when any signal pending
and no send space left, while non blocking recvmsg return -EINTR
when signal pending and no data received. This may makes confused.
As TCP returns -EAGAIN in the conditions described above. Align the
behavior of smc with TCP.
Fixes:
846e344eb722 ("net/smc: add receive timeout check")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512030820.73848-1-guangguan.wang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Thu, 12 May 2022 02:17:31 +0000 (19:17 -0700)]
net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
[ Upstream commit
b7be130c5d52e5224ac7d89568737b37b4c4b785 ]
After commit
2d1f90f9ba83 ("net: dsa/bcm_sf2: fix incorrect usage of
state->link") the interface suspend path would call our mac_link_down()
call back which would forcibly set the link down, thus preventing
Wake-on-LAN packets from reaching our management port.
Fix this by looking at whether the port is enabled for Wake-on-LAN and
not clearing the link status in that case to let packets go through.
Fixes:
2d1f90f9ba83 ("net: dsa/bcm_sf2: fix incorrect usage of state->link")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220512021731.2494261-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hui Tang [Tue, 10 May 2022 13:51:48 +0000 (21:51 +0800)]
drm/vc4: hdmi: Fix build error for implicit function declaration
[ Upstream commit
6fed53de560768bde6d701a7c79c253b45b259e3 ]
drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_connector_detect’:
drivers/gpu/drm/vc4/vc4_hdmi.c:228:7: error: implicit declaration of function ‘gpiod_get_value_cansleep’; did you mean ‘gpio_get_value_cansleep’? [-Werror=implicit-function-declaration]
if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_get_value_cansleep
CC [M] drivers/gpu/drm/vc4/vc4_validate.o
CC [M] drivers/gpu/drm/vc4/vc4_v3d.o
CC [M] drivers/gpu/drm/vc4/vc4_validate_shaders.o
CC [M] drivers/gpu/drm/vc4/vc4_debugfs.o
drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_bind’:
drivers/gpu/drm/vc4/vc4_hdmi.c:2883:23: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_clk_get_optional’? [-Werror=implicit-function-declaration]
vc4_hdmi->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
^~~~~~~~~~~~~~~~~~~~~~~
devm_clk_get_optional
drivers/gpu/drm/vc4/vc4_hdmi.c:2883:59: error: ‘GPIOD_IN’ undeclared (first use in this function); did you mean ‘GPIOF_IN’?
vc4_hdmi->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
^~~~~~~~
GPIOF_IN
drivers/gpu/drm/vc4/vc4_hdmi.c:2883:59: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors
Fixes:
6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510135148.247719-1-tanghui20@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Wed, 11 May 2022 03:17:51 +0000 (20:17 -0700)]
net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
[ Upstream commit
6b77c06655b8a749c1a3d9ebc51e9717003f7e5a ]
The interrupt controller supplying the Wake-on-LAN interrupt line maybe
modular on some platforms (irq-bcm7038-l1.c) and might be probed at a
later time than the GENET driver. We need to specifically check for
-EPROBE_DEFER and propagate that error to ensure that we eventually
fetch the interrupt descriptor.
Fixes:
9deb48b53e7f ("bcmgenet: add WOL IRQ check")
Fixes:
5b1f0e62941b ("net: bcmgenet: Avoid touching non-existent interrupt")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220511031752.2245566-1-f.fainelli@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 11 May 2022 03:08:29 +0000 (11:08 +0800)]
net: ethernet: mediatek: ppe: fix wrong size passed to memset()
[ Upstream commit
00832b1d1a393dfb1b9491d085e5b27e8c25d103 ]
'foe_table' is a pointer, the real size of struct mtk_foe_entry
should be pass to memset().
Fixes:
ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220511030829.3308094-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni [Tue, 10 May 2022 14:57:34 +0000 (16:57 +0200)]
net/sched: act_pedit: really ensure the skb is writable
[ Upstream commit
8b796475fd7882663a870456466a4fb315cc1bd6 ]
Currently pedit tries to ensure that the accessed skb offset
is writable via skb_unclone(). The action potentially allows
touching any skb bytes, so it may end-up modifying shared data.
The above causes some sporadic MPTCP self-test failures, due to
this code:
tc -n $ns2 filter add dev ns2eth$i egress \
protocol ip prio 1000 \
handle 42 fw \
action pedit munge offset 148 u8 invert \
pipe csum tcp \
index 100
The above modifies a data byte outside the skb head and the skb is
a cloned one, carrying a TCP output packet.
This change addresses the issue by keeping track of a rough
over-estimate highest skb offset accessed by the action and ensuring
such offset is really writable.
Note that this may cause performance regressions in some scenarios,
but hopefully pedit is not in the critical path.
Fixes:
db2c24175d14 ("act_pedit: access skb->data safely")
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/1fcf78e6679d0a287dd61bb0f04730ce33b3255d.1652194627.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandra Winter [Tue, 10 May 2022 07:05:08 +0000 (09:05 +0200)]
s390/lcs: fix variable dereferenced before check
[ Upstream commit
671bb35c8e746439f0ed70815968f9a4f20a8deb ]
smatch complains about
drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739)
Fixes:
27eb5ac8f015 ("[PATCH] s390: lcs driver bug fixes and improvements [1/2]")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandra Winter [Tue, 10 May 2022 07:05:07 +0000 (09:05 +0200)]
s390/ctcm: fix potential memory leak
[ Upstream commit
0c0b20587b9f25a2ad14db7f80ebe49bdf29920a ]
smatch complains about
drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo'
mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in
ctcmpc_unpack_skb().
Fixes:
293d984f0e36 ("ctcm: infrastructure for replaced ctc driver")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandra Winter [Tue, 10 May 2022 07:05:06 +0000 (09:05 +0200)]
s390/ctcm: fix variable dereferenced before check
[ Upstream commit
2c50c6867c85afee6f2b3bcbc50fc9d0083d1343 ]
Found by cppcheck and smatch.
smatch complains about
drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42)
Fixes:
3c09e2647b5e ("ctcm: rename READ/WRITE defines to avoid redefinitions")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shunsuke Mie [Tue, 10 May 2022 10:27:23 +0000 (19:27 +0900)]
virtio: fix virtio transitional ids
[ Upstream commit
7ff960a6fe399fdcbca6159063684671ae57eee9 ]
This commit fixes the transitional PCI device ID.
Fixes:
d61914ea6ada ("virtio: update virtio id table, add transitional ids")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20220510102723.87666-1-mie@igel.co.jp
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joey Gouly [Tue, 10 May 2022 10:27:21 +0000 (11:27 +0100)]
arm64: vdso: fix makefile dependency on vdso.so
[ Upstream commit
205f3991a273cac6008ef4db3d1c0dc54d14fb56 ]
There is currently no dependency for vdso*-wrap.S on vdso*.so, which means that
you can get a build that uses a stale vdso*-wrap.o.
In commit
a5b8ca97fbf8, the file that includes the vdso.so was moved and renamed
from arch/arm64/kernel/vdso/vdso.S to arch/arm64/kernel/vdso-wrap.S, when this
happened the Makefile was not updated to force the dependcy on vdso.so.
Fixes:
a5b8ca97fbf8 ("arm64: do not descend to vdso directories twice")
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220510102721.50811-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Savitz [Tue, 10 May 2022 00:34:29 +0000 (17:34 -0700)]
selftests: vm: Makefile: rename TARGETS to VMTARGETS
[ Upstream commit
41c240099fe09377b6b9f8272e45d2267c843d3e ]
The tools/testing/selftests/vm/Makefile uses the variable TARGETS
internally to generate a list of platform-specific binary build targets
suffixed with _{32,64}. When building the selftests using its own
Makefile directly, such as via the following command run in a kernel tree:
One receives an error such as the following:
make: Entering directory '/root/linux/tools/testing/selftests'
make --no-builtin-rules ARCH=x86 -C ../../.. headers_install
make[1]: Entering directory '/root/linux'
INSTALL ./usr/include
make[1]: Leaving directory '/root/linux'
make[1]: Entering directory '/root/linux/tools/testing/selftests/vm'
make[1]: *** No rule to make target 'vm.c', needed by '/root/linux/tools/testing/selftests/vm/vm_64'. Stop.
make[1]: Leaving directory '/root/linux/tools/testing/selftests/vm'
make: *** [Makefile:175: all] Error 2
make: Leaving directory '/root/linux/tools/testing/selftests'
The TARGETS variable passed to tools/testing/selftests/Makefile collides
with the TARGETS used in tools/testing/selftests/vm/Makefile, so rename
the latter to VMTARGETS, eliminating the collision with no functional
change.
Link: https://lkml.kernel.org/r/20220504213454.1282532-1-jsavitz@redhat.com
Fixes:
f21fda8f6453 ("selftests: vm: pkeys: fix multilib builds for x86")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Acked-by: Nico Pache <npache@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kalesh Singh [Tue, 10 May 2022 00:34:28 +0000 (17:34 -0700)]
procfs: prevent unprivileged processes accessing fdinfo dir
[ Upstream commit
1927e498aee1757b3df755a194cbfc5cc0f2b663 ]
The file permissions on the fdinfo dir from were changed from
S_IRUSR|S_IXUSR to S_IRUGO|S_IXUGO, and a PTRACE_MODE_READ check was added
for opening the fdinfo files [1]. However, the ptrace permission check
was not added to the directory, allowing anyone to get the open FD numbers
by reading the fdinfo directory.
Add the missing ptrace permission check for opening the fdinfo directory.
[1] https://lkml.kernel.org/r/
20210308170651.919148-1-kaleshsingh@google.com
Link: https://lkml.kernel.org/r/20210713162008.1056986-1-kaleshsingh@google.com
Fixes:
7bc3fa0172a4 ("procfs: allow reading fdinfo with PTRACE_MODE_READ")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Mon, 9 May 2022 23:47:40 +0000 (16:47 -0700)]
hwmon: (ltq-cputemp) restrict it to SOC_XWAY
[ Upstream commit
151d6dcbed836270c6c240932da66f147950cbdb ]
Building with SENSORS_LTQ_CPUTEMP=y with SOC_FALCON=y causes build
errors since FALCON does not support the same features as XWAY.
Change this symbol to depend on SOC_XWAY since that provides the
necessary interfaces.
Repairs these build errors:
../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_enable':
../drivers/hwmon/ltq-cputemp.c:23:9: error: implicit declaration of function 'ltq_cgu_w32'; did you mean 'ltq_ebu_w32'? [-Werror=implicit-function-declaration]
23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR);
../drivers/hwmon/ltq-cputemp.c:23:21: error: implicit declaration of function 'ltq_cgu_r32'; did you mean 'ltq_ebu_r32'? [-Werror=implicit-function-declaration]
23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR);
../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_probe':
../drivers/hwmon/ltq-cputemp.c:92:31: error: 'SOC_TYPE_VR9_2' undeclared (first use in this function)
92 | if (ltq_soc_type() != SOC_TYPE_VR9_2)
Fixes:
7074d0a92758 ("hwmon: (ltq-cputemp) add cpu temp sensor driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Florian Eckert <fe@dev.tdt.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20220509234740.26841-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jesse Brandeburg [Sat, 7 May 2022 01:10:38 +0000 (18:10 -0700)]
dim: initialize all struct fields
[ Upstream commit
ee1444b5e1df4155b591d0d9b1e72853a99ea861 ]
The W=2 build pointed out that the code wasn't initializing all the
variables in the dim_cq_moder declarations with the struct initializers.
The net change here is zero since these structs were already static
const globals and were initialized with zeros by the compiler, but
removing compiler warnings has value in and of itself.
lib/dim/net_dim.c: At top level:
lib/dim/net_dim.c:54:9: warning: missing initializer for field ‘comps’ of ‘const struct dim_cq_moder’ [-Wmissing-field-initializers]
54 | NET_DIM_RX_EQE_PROFILES,
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from lib/dim/net_dim.c:6:
./include/linux/dim.h:45:13: note: ‘comps’ declared here
45 | u16 comps;
| ^~~~~
and repeats for the tx struct, and once you fix the comps entry then
the cq_period_mode field needs the same treatment.
Use the commonly accepted style to indicate to the compiler that we
know what we're doing, and add a comma at the end of each struct
initializer to clean up the issue, and use explicit initializers
for the fields we are initializing which makes the compiler happy.
While here and fixing these lines, clean up the code slightly with
a fix for the super long lines by removing the word "_MODERATION" from a
couple defines only used in this file.
Fixes:
f8be17b81d44 ("lib/dim: Fix -Wunused-const-variable warnings")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20220507011038.14568-1-jesse.brandeburg@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Fri, 6 May 2022 03:40:40 +0000 (11:40 +0800)]
ionic: fix missing pci_release_regions() on error in ionic_probe()
[ Upstream commit
e4b1045bf9cfec6f70ac6d3783be06c3a88dcb25 ]
If ionic_map_bars() fails, pci_release_regions() need be called.
Fixes:
fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220506034040.2614129-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Aloni [Sun, 8 May 2022 12:54:50 +0000 (15:54 +0300)]
nfs: fix broken handling of the softreval mount option
[ Upstream commit
085d16d5f949b64713d5e960d6c9bbf51bc1d511 ]
Turns out that ever since this mount option was added, passing
`softreval` in NFS mount options cancelled all other flags while not
affecting the underlying flag `NFS_MOUNT_SOFTREVAL`.
Fixes:
c74dfe97c104 ("NFS: Add mount option 'softreval'")
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Thu, 5 May 2022 21:04:22 +0000 (23:04 +0200)]
mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
[ Upstream commit
9e2db50f1ef2238fc2f71c5de1c0418b7a5b0ea2 ]
This is needed since it might use (and pass out) pointers to
e.g. keys protected by RCU. Can't really happen here as the
frames aren't encrypted, but we need to still adhere to the
rules.
Fixes:
cacfddf82baf ("mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220505230421.5f139f9de173.I77ae111a28f7c0e9fd1ebcee7f39dbec5c606770@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taehee Yoo [Wed, 4 May 2022 12:32:27 +0000 (12:32 +0000)]
net: sfc: fix memory leak due to ptp channel
[ Upstream commit
49e6123c65dac6393b04f39ceabf79c44f66b8be ]
It fixes memory leak in ring buffer change logic.
When ring buffer size is changed(ethtool -G eth0 rx 4096), sfc driver
works like below.
1. stop all channels and remove ring buffers.
2. allocates new buffer array.
3. allocates rx buffers.
4. start channels.
While the above steps are working, it skips some steps if the channel
doesn't have a ->copy callback function.
Due to ptp channel doesn't have ->copy callback, these above steps are
skipped for ptp channel.
It eventually makes some problems.
a. ptp channel's ring buffer size is not changed, it works only
1024(default).
b. memory leak.
The reason for memory leak is to use the wrong ring buffer values.
There are some values, which is related to ring buffer size.
a. efx->rxq_entries
- This is global value of rx queue size.
b. rx_queue->ptr_mask
- used for access ring buffer as circular ring.
- roundup_pow_of_two(efx->rxq_entries) - 1
c. rx_queue->max_fill
- efx->rxq_entries - EFX_RXD_HEAD_ROOM
These all values should be based on ring buffer size consistently.
But ptp channel's values are not.
a. efx->rxq_entries
- This is global(for sfc) value, always new ring buffer size.
b. rx_queue->ptr_mask
- This is always 1023(default).
c. rx_queue->max_fill
- This is new ring buffer size - EFX_RXD_HEAD_ROOM.
Let's assume we set 4096 for rx ring buffer,
normal channel ptp channel
efx->rxq_entries 4096 4096
rx_queue->ptr_mask 4095 1023
rx_queue->max_fill 4086 4086
sfc driver allocates rx ring buffers based on these values.
When it allocates ptp channel's ring buffer, 4086 ring buffers are
allocated then, these buffers are attached to the allocated array.
But ptp channel's ring buffer array size is still 1024(default)
and ptr_mask is still 1023 too.
So, 3062 ring buffers will be overwritten to the array.
This is the reason for memory leak.
Test commands:
ethtool -G <interface name> rx 4096
while :
do
ip link set <interface name> up
ip link set <interface name> down
done
In order to avoid this problem, it adds ->copy callback to ptp channel
type.
So that rx_queue->ptr_mask value will be updated correctly.
Fixes:
7c236c43b838 ("sfc: Add support for IEEE-1588 PTP")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiapeng Chong [Wed, 5 Jan 2022 15:22:37 +0000 (23:22 +0800)]
sfc: Use swap() instead of open coding it
[ Upstream commit
0cf765fb00ce083c017f2571ac449cf7912cdb06 ]
Clean the following coccicheck warning:
./drivers/net/ethernet/sfc/efx_channels.c:870:36-37: WARNING opportunity
for swap().
./drivers/net/ethernet/sfc/efx_channels.c:824:36-37: WARNING opportunity
for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Javier Martinez Canillas [Fri, 6 May 2022 13:22:25 +0000 (15:22 +0200)]
fbdev: efifb: Fix a use-after-free due early fb_info cleanup
[ Upstream commit
1b5853dfab7fdde450f00f145327342238135c8a ]
Commit
d258d00fb9c7 ("fbdev: efifb: Cleanup fb_info in .fb_destroy rather
than .remove") attempted to fix a use-after-free error due driver freeing
the fb_info in the .remove handler instead of doing it in .fb_destroy.
But ironically that change introduced yet another use-after-free since the
fb_info was still used after the free.
This should fix for good by freeing the fb_info at the end of the handler.
Fixes:
d258d00fb9c7 ("fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Thomas Zimmermann <tzimemrmann@suse.de>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220506132225.588379-1-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Thu, 5 May 2022 23:31:01 +0000 (16:31 -0700)]
net: chelsio: cxgb4: Avoid potential negative array offset
[ Upstream commit
1c7ab9cd98b78bef1657a5db7204d8d437e24c94 ]
Using min_t(int, ...) as a potential array index implies to the compiler
that negative offsets should be allowed. This is not the case, though.
Replace "int" with "unsigned int". Fixes the following warning exposed
under future CONFIG_FORTIFY_SOURCE improvements:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:11,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/lockdep.h:14,
from include/linux/rcupdate.h:29,
from include/linux/rculist.h:11,
from include/linux/pid.h:5,
from include/linux/sched.h:14,
from include/linux/delay.h:23,
from drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:35:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function 't4_get_raw_vpd_params':
include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 29 and size [
2147483648,
4294967295] [-Warray-bounds]
46 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
388 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
433 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2796:9: note: in expansion of macro 'memcpy'
2796 | memcpy(p->id, vpd + id, min_t(int, id_len, ID_LEN));
| ^~~~~~
include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 0 and size [
2147483648,
4294967295] [-Warray-bounds]
46 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
388 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
433 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2798:9: note: in expansion of macro 'memcpy'
2798 | memcpy(p->sn, vpd + sn, min_t(int, sn_len, SERNUM_LEN));
| ^~~~~~
Additionally remove needless cast from u8[] to char * in last strim()
call.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202205031926.FVP7epJM-lkp@intel.com
Fixes:
fc9279298e3a ("cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()")
Fixes:
24c521f81c30 ("cxgb4: Use pci_vpd_find_id_string() to find VPD ID string")
Cc: Raju Rangoju <rajur@chelsio.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220505233101.1224230-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 5 May 2022 16:19:46 +0000 (09:19 -0700)]
netlink: do not reset transport header in netlink_recvmsg()
[ Upstream commit
d5076fe4049cadef1f040eda4aaa001bb5424225 ]
netlink_recvmsg() does not need to change transport header.
If transport header was needed, it should have been reset
by the producer (netlink_dump()), not the consumer(s).
The following trace probably happened when multiple threads
were using MSG_PEEK.
BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg
write to 0xffff88811e9f15b2 of 2 bytes by task 32012 on cpu 1:
skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
__sys_recvfrom+0x204/0x2c0 net/socket.c:2097
__do_sys_recvfrom net/socket.c:2115 [inline]
__se_sys_recvfrom net/socket.c:2111 [inline]
__x64_sys_recvfrom+0x74/0x90 net/socket.c:2111
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
write to 0xffff88811e9f15b2 of 2 bytes by task 32005 on cpu 0:
skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
____sys_recvmsg+0x162/0x2f0
___sys_recvmsg net/socket.c:2674 [inline]
__sys_recvmsg+0x209/0x3f0 net/socket.c:2704
__do_sys_recvmsg net/socket.c:2714 [inline]
__se_sys_recvmsg net/socket.c:2711 [inline]
__x64_sys_recvmsg+0x42/0x50 net/socket.c:2711
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffff -> 0x0000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32005 Comm: syz-executor.4 Not tainted 5.18.0-rc1-syzkaller-00328-ge1f700ebd6be-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220505161946.2867638-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Wed, 9 Feb 2022 06:03:11 +0000 (07:03 +0100)]
drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()
[ Upstream commit
ab244be47a8f111bc82496a8a20c907236e37f95 ]
If successful ida_simple_get() calls are not undone when needed, some
additional memory may be allocated and wasted.
Here, an ID between 0 and MAX_INT is required. If this ID is >=100, it is
not taken into account and is wasted. It should be released.
Instead of calling ida_simple_remove(), take advantage of the 'max'
parameter to require the ID not to be too big. Should it be too big, it
is not allocated and don't need to be freed.
While at it, use ida_alloc_xxx()/ida_free() instead to
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Fixes:
db1a0ae21461 ("drm/nouveau/bl: Assign different names to interfaces")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Fixed formatting warning from checkpatch]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9ba85bca59df6813dc029e743a836451d5173221.1644386541.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lokesh Dhoundiyal [Thu, 5 May 2022 02:00:17 +0000 (14:00 +1200)]
ipv4: drop dst in multicast routing path
[ Upstream commit
9e6c6d17d1d6a3f1515ce399f9a011629ec79aa0 ]
kmemleak reports the following when routing multicast traffic over an
ipsec tunnel.
Kmemleak output:
unreferenced object 0x8000000044bebb00 (size 256):
comm "softirq", pid 0, jiffies
4294985356 (age 126.810s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 80 00 00 00 05 13 74 80 ..............t.
80 00 00 00 04 9b bf f9 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000f83947e0>] __kmalloc+0x1e8/0x300
[<
00000000b7ed8dca>] metadata_dst_alloc+0x24/0x58
[<
0000000081d32c20>] __ipgre_rcv+0x100/0x2b8
[<
00000000824f6cf1>] gre_rcv+0x178/0x540
[<
00000000ccd4e162>] gre_rcv+0x7c/0xd8
[<
00000000c024b148>] ip_protocol_deliver_rcu+0x124/0x350
[<
000000006a483377>] ip_local_deliver_finish+0x54/0x68
[<
00000000d9271b3a>] ip_local_deliver+0x128/0x168
[<
00000000bd4968ae>] xfrm_trans_reinject+0xb8/0xf8
[<
0000000071672a19>] tasklet_action_common.isra.16+0xc4/0x1b0
[<
0000000062e9c336>] __do_softirq+0x1fc/0x3e0
[<
00000000013d7914>] irq_exit+0xc4/0xe0
[<
00000000a4d73e90>] plat_irq_dispatch+0x7c/0x108
[<
000000000751eb8e>] handle_int+0x16c/0x178
[<
000000001668023b>] _raw_spin_unlock_irqrestore+0x1c/0x28
The metadata dst is leaked when ip_route_input_mc() updates the dst for
the skb. Commit
f38a9eb1f77b ("dst: Metadata destinations") correctly
handled dropping the dst in ip_route_input_slow() but missed the
multicast case which is handled by ip_route_input_mc(). Drop the dst in
ip_route_input_mc() avoiding the leak.
Fixes:
f38a9eb1f77b ("dst: Metadata destinations")
Signed-off-by: Lokesh Dhoundiyal <lokesh.dhoundiyal@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220505020017.3111846-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Michalik [Wed, 20 Apr 2022 12:23:02 +0000 (14:23 +0200)]
ice: fix PTP stale Tx timestamps cleanup
[ Upstream commit
a11b6c1a383ff092f432e040c20e032503785d47 ]
Read stale PTP Tx timestamps from PHY on cleanup.
After running out of Tx timestamps request handlers, hardware (HW) stops
reporting finished requests. Function ice_ptp_tx_tstamp_cleanup() used
to only clean up stale handlers in driver and was leaving the hardware
registers not read. Not reading stale PTP Tx timestamps prevents next
interrupts from arriving and makes timestamping unusable.
Fixes:
ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ivan Vecera [Sat, 23 Apr 2022 10:20:21 +0000 (12:20 +0200)]
ice: Fix race during aux device (un)plugging
[ Upstream commit
486b9eee57ddca5c9a2d59fc41153f36002e0a00 ]
Function ice_plug_aux_dev() assigns pf->adev field too early prior
aux device initialization and on other side ice_unplug_aux_dev()
starts aux device deinit and at the end assigns NULL to pf->adev.
This is wrong because pf->adev should always be non-NULL only when
aux device is fully initialized and ready. This wrong order causes
a crash when ice_send_event_to_aux() call occurs because that function
depends on non-NULL value of pf->adev and does not assume that
aux device is half-initialized or half-destroyed.
After order correction the race window is tiny but it is still there,
as Leon mentioned and manipulation with pf->adev needs to be protected
by mutex.
Fix (un-)plugging functions so pf->adev field is set after aux device
init and prior aux device destroy and protect pf->adev assignment by
new mutex. This mutex is also held during ice_send_event_to_aux()
call to ensure that aux device is valid during that call.
Note that device lock used ice_send_event_to_aux() needs to be kept
to avoid race with aux drv unload.
Reproducer:
cycle=1
while :;do
echo "#### Cycle: $cycle"
ip link set ens7f0 mtu 9000
ip link add bond0 type bond mode 1 miimon 100
ip link set bond0 up
ifenslave bond0 ens7f0
ip link set bond0 mtu 9000
ethtool -L ens7f0 combined 1
ip link del bond0
ip link set ens7f0 mtu 1500
sleep 1
let cycle++
done
In short when the device is added/removed to/from bond the aux device
is unplugged/plugged. When MTU of the device is changed an event is
sent to aux device asynchronously. This can race with (un)plugging
operation and because pf->adev is set too early (plug) or too late
(unplug) the function ice_send_event_to_aux() can touch uninitialized
or destroyed fields. In the case of crash below pf->adev->dev.mutex.
Crash:
[ 53.372066] bond0: (slave ens7f0): making interface the new active one
[ 53.378622] bond0: (slave ens7f0): Enslaving as an active interface with an u
p link
[ 53.386294] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 53.549104] bond0: (slave ens7f1): Enslaving as a backup interface with an up
link
[ 54.118906] ice 0000:ca:00.0 ens7f0: Number of in use tx queues changed inval
idating tc mappings. Priority traffic classification disabled!
[ 54.233374] ice 0000:ca:00.1 ens7f1: Number of in use tx queues changed inval
idating tc mappings. Priority traffic classification disabled!
[ 54.248204] bond0: (slave ens7f0): Releasing backup interface
[ 54.253955] bond0: (slave ens7f1): making interface the new active one
[ 54.274875] bond0: (slave ens7f1): Releasing backup interface
[ 54.289153] bond0 (unregistering): Released all slaves
[ 55.383179] MII link monitoring set to 100 ms
[ 55.398696] bond0: (slave ens7f0): making interface the new active one
[ 55.405241] BUG: kernel NULL pointer dereference, address:
0000000000000080
[ 55.405289] bond0: (slave ens7f0): Enslaving as an active interface with an u
p link
[ 55.412198] #PF: supervisor write access in kernel mode
[ 55.412200] #PF: error_code(0x0002) - not-present page
[ 55.412201] PGD
25d2ad067 P4D 0
[ 55.412204] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 55.412207] CPU: 0 PID: 403 Comm: kworker/0:2 Kdump: loaded Tainted: G S
5.17.0-13579-g57f2d6540f03 #1
[ 55.429094] bond0: (slave ens7f1): Enslaving as a backup interface with an up
link
[ 55.430224] Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.4.4 10/07/
2021
[ 55.430226] Workqueue: ice ice_service_task [ice]
[ 55.468169] RIP: 0010:mutex_unlock+0x10/0x20
[ 55.472439] Code: 0f b1 13 74 96 eb e0 4c 89 ee eb d8 e8 79 54 ff ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 40 ef 01 00 31 d2 <f0> 48 0f b1 17 75 01 c3 e9 e3 fe ff ff 0f 1f 00 0f 1f 44 00 00 48
[ 55.491186] RSP: 0018:
ff4454230d7d7e28 EFLAGS:
00010246
[ 55.496413] RAX:
ff1a79b208b08000 RBX:
ff1a79b2182e8880 RCX:
0000000000000001
[ 55.503545] RDX:
0000000000000000 RSI:
ff4454230d7d7db0 RDI:
0000000000000080
[ 55.510678] RBP:
ff1a79d1c7e48b68 R08:
ff4454230d7d7db0 R09:
0000000000000041
[ 55.517812] R10:
00000000000000a5 R11:
00000000000006e6 R12:
ff1a79d1c7e48bc0
[ 55.524945] R13:
0000000000000000 R14:
ff1a79d0ffc305c0 R15:
0000000000000000
[ 55.532076] FS:
0000000000000000(0000) GS:
ff1a79d0ffc00000(0000) knlGS:
0000000000000000
[ 55.540163] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 55.545908] CR2:
0000000000000080 CR3:
00000003487ae003 CR4:
0000000000771ef0
[ 55.553041] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 55.560173] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 55.567305] PKRU:
55555554
[ 55.570018] Call Trace:
[ 55.572474] <TASK>
[ 55.574579] ice_service_task+0xaab/0xef0 [ice]
[ 55.579130] process_one_work+0x1c5/0x390
[ 55.583141] ? process_one_work+0x390/0x390
[ 55.587326] worker_thread+0x30/0x360
[ 55.590994] ? process_one_work+0x390/0x390
[ 55.595180] kthread+0xe6/0x110
[ 55.598325] ? kthread_complete_and_exit+0x20/0x20
[ 55.603116] ret_from_fork+0x1f/0x30
[ 55.606698] </TASK>
Fixes:
f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maximilian Luz [Fri, 29 Apr 2022 19:57:38 +0000 (21:57 +0200)]
platform/surface: aggregator: Fix initialization order when compiling as builtin module
[ Upstream commit
44acfc22c7d055d9c4f8f0974ee28422405b971a ]
When building the Surface Aggregator Module (SAM) core, registry, and
other SAM client drivers as builtin modules (=y), proper initialization
order is not guaranteed. Due to this, client driver registration
(triggered by device registration in the registry) races against bus
initialization in the core.
If any attempt is made at registering the device driver before the bus
has been initialized (i.e. if bus initialization fails this race) driver
registration will fail with a message similar to:
Driver surface_battery was unable to register with bus_type surface_aggregator because the bus was not initialized
Switch from module_init() to subsys_initcall() to resolve this issue.
Note that the serdev subsystem uses postcore_initcall() so we are still
able to safely register the serdev device driver for the core.
Fixes:
c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Reported-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220429195738.535751-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Javier Martinez Canillas [Thu, 5 May 2022 22:06:31 +0000 (00:06 +0200)]
fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove
[ Upstream commit
b3c9a924aab61adbc29df110006aa03afe1a78ba ]
The driver is calling framebuffer_release() in its .remove callback, but
this will cause the struct fb_info to be freed too early. Since it could
be that a reference is still hold to it if user-space opened the fbdev.
This would lead to a use-after-free error if the framebuffer device was
unregistered but later a user-space process tries to close the fbdev fd.
To prevent this, move the framebuffer_release() call to fb_ops.fb_destroy
instead of doing it in the driver's .remove callback.
Strictly speaking, the code flow in the driver is still wrong because all
the hardware cleanupd (i.e: iounmap) should be done in .remove while the
software cleanup (i.e: releasing the framebuffer) should be done in the
.fb_destroy handler. But this at least makes to match the behavior before
commit
27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal").
Fixes:
27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505220631.366371-1-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Javier Martinez Canillas [Thu, 5 May 2022 22:05:40 +0000 (00:05 +0200)]
fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove
[ Upstream commit
d258d00fb9c7c0cdf9d10c1ded84f10339d2d349 ]
The driver is calling framebuffer_release() in its .remove callback, but
this will cause the struct fb_info to be freed too early. Since it could
be that a reference is still hold to it if user-space opened the fbdev.
This would lead to a use-after-free error if the framebuffer device was
unregistered but later a user-space process tries to close the fbdev fd.
To prevent this, move the framebuffer_release() call to fb_ops.fb_destroy
instead of doing it in the driver's .remove callback.
Strictly speaking, the code flow in the driver is still wrong because all
the hardware cleanupd (i.e: iounmap) should be done in .remove while the
software cleanup (i.e: releasing the framebuffer) should be done in the
.fb_destroy handler. But this at least makes to match the behavior before
commit
27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal").
Fixes:
27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505220540.366218-1-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Javier Martinez Canillas [Thu, 5 May 2022 22:04:56 +0000 (00:04 +0200)]
fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove
[ Upstream commit
666b90b3ce9e4aac1e1deba266c3a230fb3913b0 ]
The driver is calling framebuffer_release() in its .remove callback, but
this will cause the struct fb_info to be freed too early. Since it could
be that a reference is still hold to it if user-space opened the fbdev.
This would lead to a use-after-free error if the framebuffer device was
unregistered but later a user-space process tries to close the fbdev fd.
To prevent this, move the framebuffer_release() call to fb_ops.fb_destroy
instead of doing it in the driver's .remove callback.
Strictly speaking, the code flow in the driver is still wrong because all
the hardware cleanupd (i.e: iounmap) should be done in .remove while the
software cleanup (i.e: releasing the framebuffer) should be done in the
.fb_destroy handler. But this at least makes to match the behavior before
commit
27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal").
Fixes:
27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505220456.366090-1-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Wed, 4 May 2022 23:55:03 +0000 (02:55 +0300)]
net: mscc: ocelot: avoid corrupting hardware counters when moving VCAP filters
[ Upstream commit
93a8417088ea570b5721d2b526337a2d3aed9fa3 ]
Given the following order of operations:
(1) we add filter A using tc-flower
(2) we send a packet that matches it
(3) we read the filter's statistics to find a hit count of 1
(4) we add a second filter B with a higher preference than A, and A
moves one position to the right to make room in the TCAM for it
(5) we send another packet, and this matches the second filter B
(6) we read the filter statistics again.
When this happens, the hit count of filter A is 2 and of filter B is 1,
despite a single packet having matched each filter.
Furthermore, in an alternate history, reading the filter stats a second
time between steps (3) and (4) makes the hit count of filter A remain at
1 after step (6), as expected.
The reason why this happens has to do with the filter->stats.pkts field,
which is written to hardware through the call path below:
vcap_entry_set
/ | \
/ | \
/ | \
/ | \
es0_entry_set is1_entry_set is2_entry_set
\ | /
\ | /
\ | /
vcap_data_set(data.counter, ...)
The primary role of filter->stats.pkts is to transport the filter hit
counters from the last readout all the way from vcap_entry_get() ->
ocelot_vcap_filter_stats_update() -> ocelot_cls_flower_stats().
The reason why vcap_entry_set() writes it to hardware is so that the
counters (saturating and having a limited bit width) are cleared
after each user space readout.
The writing of filter->stats.pkts to hardware during the TCAM entry
movement procedure is an unintentional consequence of the code design,
because the hit count isn't up to date at this point.
So at step (4), when filter A is moved by ocelot_vcap_filter_add() to
make room for filter B, the hardware hit count is 0 (no packet matched
on it in the meantime), but filter->stats.pkts is 1, because the last
readout saw the earlier packet. The movement procedure programs the old
hit count back to hardware, so this creates the impression to user space
that more packets have been matched than they really were.
The bug can be seen when running the gact_drop_and_ok_test() from the
tc_actions.sh selftest.
Fix the issue by reading back the hit count to tmp->stats.pkts before
migrating the VCAP filter. Sure, this is a best-effort technique, since
the packets that hit the rule between vcap_entry_get() and
vcap_entry_set() won't be counted, but at least it allows the counters
to be reliably used for selftests where the traffic is under control.
The vcap_entry_get() name is a bit unintuitive, but it only reads back
the counter portion of the TCAM entry, not the entire entry.
The index from which we retrieve the counter is also a bit unintuitive
(i - 1 during add, i + 1 during del), but this is the way in which TCAM
entry movement works. The "entry index" isn't a stored integer for a
TCAM filter, instead it is dynamically computed by
ocelot_vcap_block_get_filter_index() based on the entry's position in
the &block->rules list. That position (as well as block->count) is
automatically updated by ocelot_vcap_filter_add_to_block() on add, and
by ocelot_vcap_block_remove_filter() on del. So "i" is the new filter
index, and "i - 1" or "i + 1" respectively are the old addresses of that
TCAM entry (we only support installing/deleting one filter at a time).
Fixes:
b596229448dd ("net: mscc: ocelot: Add support for tcam")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Wed, 4 May 2022 23:55:02 +0000 (02:55 +0300)]
net: mscc: ocelot: restrict tc-trap actions to VCAP IS2 lookup 0
[ Upstream commit
477d2b91623e682e9a8126ea92acb8f684969cc7 ]
Once the CPU port was added to the destination port mask of a packet, it
can never be cleared, so even packets marked as dropped by the MASK_MODE
of a VCAP IS2 filter will still reach it. This is why we need the
OCELOT_POLICER_DISCARD to "kill dropped packets dead" and make software
stop seeing them.
We disallow policer rules from being put on any other chain than the one
for the first lookup, but we don't do this for "drop" rules, although we
should. This change is merely ascertaining that the rules dont't
(completely) work and letting the user know.
The blamed commit is the one that introduced the multi-chain architecture
in ocelot. Prior to that, we should have always offloaded the filters to
VCAP IS2 lookup 0, where they did work.
Fixes:
1397a2eb52e2 ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Wed, 4 May 2022 23:55:01 +0000 (02:55 +0300)]
net: mscc: ocelot: fix VCAP IS2 filters matching on both lookups
[ Upstream commit
6741e11880003e35802d78cc58035057934f4dab ]
The VCAP IS2 TCAM is looked up twice per packet, and each filter can be
configured to only match during the first, second lookup, or both, or
none.
The blamed commit wrote the code for making VCAP IS2 filters match only
on the given lookup. But right below that code, there was another line
that explicitly made the lookup a "don't care", and this is overwriting
the lookup we've selected. So the code had no effect.
Some of the more noticeable effects of having filters match on both
lookups:
- in "tc -s filter show dev swp0 ingress", we see each packet matching a
VCAP IS2 filter counted twice. This throws off scripts such as
tools/testing/selftests/net/forwarding/tc_actions.sh and makes them
fail.
- a "tc-drop" action offloaded to VCAP IS2 needs a policer as well,
because once the CPU port becomes a member of the destination port
mask of a packet, nothing removes it, not even a PERMIT/DENY mask mode
with a port mask of 0. But VCAP IS2 rules with the POLICE_ENA bit in
the action vector can only appear in the first lookup. What happens
when a filter matches both lookups is that the action vector is
combined, and this makes the POLICE_ENA bit ineffective, since the
last lookup in which it has appeared is the second one. In other
words, "tc-drop" actions do not drop packets for the CPU port, dropped
packets are still seen by software unless there was an FDB entry that
directed those packets to some other place different from the CPU.
The last bit used to work, because in the initial commit
b596229448dd
("net: mscc: ocelot: Add support for tcam"), we were writing the FIRST
field of the VCAP IS2 half key with a 1, not with a "don't care".
The change to "don't care" was made inadvertently by me in commit
c1c3993edb7c ("net: mscc: ocelot: generalize existing code for VCAP"),
which I just realized, and which needs a separate fix from this one,
for "stable" kernels that lack the commit blamed below.
Fixes:
226e9cd82a96 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Wed, 4 May 2022 23:55:00 +0000 (02:55 +0300)]
net: mscc: ocelot: fix last VCAP IS1/IS2 filter persisting in hardware when deleted
[ Upstream commit
16bbebd35629c93a8c68c6d8d28557e100bcee73 ]
ocelot_vcap_filter_del() works by moving the next filters over the
current one, and then deleting the last filter by calling vcap_entry_set()
with a del_filter which was specially created by memsetting its memory
to zeroes. vcap_entry_set() then programs this to the TCAM and action
RAM via the cache registers.
The problem is that vcap_entry_set() is a dispatch function which looks
at del_filter->block_id. But since del_filter is zeroized memory, the
block_id is 0, or otherwise said, VCAP_ES0. So practically, what we do
is delete the entry at the same TCAM index from VCAP ES0 instead of IS1
or IS2.
The code was not always like this. vcap_entry_set() used to simply be
is2_entry_set(), and then, the logic used to work.
Restore the functionality by populating the block_id of the del_filter
based on the VCAP block of the filter that we're deleting. This makes
vcap_entry_set() know what to do.
Fixes:
1397a2eb52e2 ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tariq Toukan [Wed, 4 May 2022 08:09:14 +0000 (11:09 +0300)]
net: Fix features skip in for_each_netdev_feature()
[ Upstream commit
85db6352fc8a158a893151baa1716463d34a20d0 ]
The find_next_netdev_feature() macro gets the "remaining length",
not bit index.
Passing "bit - 1" for the following iteration is wrong as it skips
the adjacent bit. Pass "bit" instead.
Fixes:
3b89ea9c5902 ("net: Fix for_each_netdev_feature on Big endian")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20220504080914.1918-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manikanta Pubbisetty [Thu, 28 Apr 2022 05:27:44 +0000 (10:57 +0530)]
mac80211: Reset MBSSID parameters upon connection
[ Upstream commit
86af062f40a73bf63321694e6bf637144f0383fe ]
Currently MBSSID parameters in struct ieee80211_bss_conf
are not reset upon connection. This could be problematic
with some drivers in a scenario where the device first
connects to a non-transmit BSS and then connects to a
transmit BSS of a Multi BSS AP. The MBSSID parameters
which are set after connecting to a non-transmit BSS will
not be reset and the same parameters will be passed on to
the driver during the subsequent connection to a transmit
BSS of a Multi BSS AP.
For example, firmware running on the ath11k device uses the
Multi BSS data for tracking the beacon of a non-transmit BSS
and reports the driver when there is a beacon miss. If we do
not reset the MBSSID parameters during the subsequent
connection to a transmit BSS, then the driver would have
wrong MBSSID data and FW would be looking for an incorrect
BSSID in the MBSSID beacon of a Multi BSS AP and reports
beacon loss leading to an unstable connection.
Reset the MBSSID parameters upon every connection to solve this
problem.
Fixes:
78ac51f81532 ("mac80211: support multi-bssid")
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Link: https://lore.kernel.org/r/20220428052744.27040-1-quic_mpubbise@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Camel Guo [Tue, 3 May 2022 11:43:33 +0000 (13:43 +0200)]
hwmon: (tmp401) Add OF device ID table
[ Upstream commit
3481551f035725fdc46885425eac3ef9b58ae7b7 ]
This driver doesn't have of_match_table. This makes the kernel module
tmp401.ko lack alias patterns (e.g: of:N*T*Cti,tmp411) to match DT node
of the supported devices hence this kernel module will not be
automatically loaded.
After adding of_match_table to this driver, the folllowing alias will be
added into tmp401.ko.
$ modinfo drivers/hwmon/tmp401.ko
filename: drivers/hwmon/tmp401.ko
......
author: Hans de Goede <hdegoede@redhat.com>
alias: of:N*T*Cti,tmp435C*
alias: of:N*T*Cti,tmp435
alias: of:N*T*Cti,tmp432C*
alias: of:N*T*Cti,tmp432
alias: of:N*T*Cti,tmp431C*
alias: of:N*T*Cti,tmp431
alias: of:N*T*Cti,tmp411C*
alias: of:N*T*Cti,tmp411
alias: of:N*T*Cti,tmp401C*
alias: of:N*T*Cti,tmp401
......
Fixes:
af503716ac14 ("i2c: core: report OF style module alias for devices registered via OF")
Signed-off-by: Camel Guo <camel.guo@axis.com>
Link: https://lore.kernel.org/r/20220503114333.456476-1-camel.guo@axis.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Mon, 11 Apr 2022 15:42:10 +0000 (08:42 -0700)]
iwlwifi: iwl-dbg: Use del_timer_sync() before freeing
[ Upstream commit
7635a1ad8d92dcc8247b53f949e37795154b5b6f ]
In Chrome OS, a large number of crashes is observed due to corrupted timer
lists. Steven Rostedt pointed out that this usually happens when a timer
is freed while still active, and that the problem is often triggered
by code calling del_timer() instead of del_timer_sync() just before
freeing.
Steven also identified the iwlwifi driver as one of the possible culprits
since it does exactly that.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Fixes:
60e8abd9d3e91 ("iwlwifi: dbg_ini: add periodic trigger new API support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Linux v5.17.3-rc1 and Debian LLVM-14
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220411154210.1870008-1-linux@roeck-us.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Eckelmann [Sat, 16 Apr 2022 11:51:10 +0000 (13:51 +0200)]
batman-adv: Don't skb_split skbuffs with frag_list
[ Upstream commit
a063f2fba3fa633a599253b62561051ac185fa99 ]
The receiving interface might have used GRO to receive more fragments than
MAX_SKB_FRAGS fragments. In this case, these will not be stored in
skb_shinfo(skb)->frags but merged into the frag list.
batman-adv relies on the function skb_split to split packets up into
multiple smaller packets which are not larger than the MTU on the outgoing
interface. But this function cannot handle frag_list entries and is only
operating on skb_shinfo(skb)->frags. If it is still trying to split such an
skb and xmit'ing it on an interface without support for NETIF_F_FRAGLIST,
then validate_xmit_skb() will try to linearize it. But this fails due to
inconsistent information. And __pskb_pull_tail will trigger a BUG_ON after
skb_copy_bits() returns an error.
In case of entries in frag_list, just linearize the skb before operating on
it with skb_split().
Reported-by: Felix Kaechele <felix@kaechele.ca>
Fixes:
c6c8fea29769 ("net: Add batman-adv meshing protocol")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Felix Kaechele <felix@kaechele.ca>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Sun, 15 May 2022 18:18:54 +0000 (20:18 +0200)]
Linux 5.15.40
Link: https://lore.kernel.org/r/20220513142229.874949670@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Xu [Tue, 22 Mar 2022 21:39:37 +0000 (14:39 -0700)]
mm: fix invalid page pointer returned with FOLL_PIN gups
commit
7196040e19ad634293acd3eff7083149d7669031 upstream.
Patch series "mm/gup: some cleanups", v5.
This patch (of 5):
Alex reported invalid page pointer returned with pin_user_pages_remote()
from vfio after upstream commit
4b6c33b32296 ("vfio/type1: Prepare for
batched pinning with struct vfio_batch").
It turns out that it's not the fault of the vfio commit; however after
vfio switches to a full page buffer to store the page pointers it starts
to expose the problem easier.
The problem is for VM_PFNMAP vmas we should normally fail with an
-EFAULT then vfio will carry on to handle the MMIO regions. However
when the bug triggered, follow_page_mask() returned -EEXIST for such a
page, which will jump over the current page, leaving that entry in
**pages untouched. However the caller is not aware of it, hence the
caller will reference the page as usual even if the pointer data can be
anything.
We had that -EEXIST logic since commit
1027e4436b6a ("mm: make GUP
handle pfn mapping unless FOLL_GET is requested") which seems very
reasonable. It could be that when we reworked GUP with FOLL_PIN we
could have overlooked that special path in commit
3faa52c03f44 ("mm/gup:
track FOLL_PIN pages"), even if that commit rightfully touched up
follow_devmap_pud() on checking FOLL_PIN when it needs to return an
-EEXIST.
Attaching the Fixes to the FOLL_PIN rework commit, as it happened later
than
1027e4436b6a.
[jhubbard@nvidia.com: added some tags, removed a reference to an out of tree module.]
Link: https://lkml.kernel.org/r/20220207062213.235127-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20220204020010.68930-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20220204020010.68930-2-jhubbard@nvidia.com
Fixes:
3faa52c03f44 ("mm/gup: track FOLL_PIN pages")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Debugged-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaohe Lin [Tue, 22 Mar 2022 21:44:56 +0000 (14:44 -0700)]
mm/mlock: fix potential imbalanced rlimit ucounts adjustment
commit
5c2a956c3eea173b2bc89f632507c0eeaebf6c4a upstream.
user_shm_lock forgets to set allowed to 0 when get_ucounts fails. So
the later user_shm_unlock might do the extra dec_rlimit_ucounts. Fix
this by resetting allowed to 0.
Link: https://lkml.kernel.org/r/20220310132417.41189-1-linmiaohe@huawei.com
Fixes:
d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Herbert van den Bergh <herbert.van.den.bergh@oracle.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Naoya Horiguchi [Tue, 22 Mar 2022 21:44:06 +0000 (14:44 -0700)]
mm/hwpoison: fix error page recovered but reported "not recovered"
commit
046545a661af2beec21de7b90ca0e35f05088a81 upstream.
When an uncorrected memory error is consumed there is a race between the
CMCI from the memory controller reporting an uncorrected error with a
UCNA signature, and the core reporting and SRAR signature machine check
when the data is about to be consumed.
If the CMCI wins that race, the page is marked poisoned when
uc_decode_notifier() calls memory_failure() and the machine check
processing code finds the page already poisoned. It calls
kill_accessing_process() to make sure a SIGBUS is sent. But returns the
wrong error code.
Console log looks like this:
mce: Uncorrected hardware memory error in user-access at
3710b3400
Memory failure: 0x3710b3: recovery action for dirty LRU page: Recovered
Memory failure: 0x3710b3: already hardware poisoned
Memory failure: 0x3710b3: Sending SIGBUS to einj_mem_uc:361438 due to hardware memory corruption
mce: Memory error not recovered
kill_accessing_process() is supposed to return -EHWPOISON to notify that
SIGBUS is already set to the process and kill_me_maybe() doesn't have to
send it again. But current code simply fails to do this, so fix it to
make sure to work as intended. This change avoids the noise message
"Memory error not recovered" and skips duplicate SIGBUSs.
[tony.luck@intel.com: reword some parts of commit message]
Link: https://lkml.kernel.org/r/20220113231117.1021405-1-naoya.horiguchi@linux.dev
Fixes:
a3f5d80ea401 ("mm,hwpoison: send SIGBUS with error virutal address")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Youquan Song <youquan.song@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Muchun Song [Tue, 22 Mar 2022 21:42:08 +0000 (14:42 -0700)]
mm: userfaultfd: fix missing cache flush in mcopy_atomic_pte() and __mcopy_atomic()
commit
7c25a0b89a487878b0691e6524fb5a8827322194 upstream.
userfaultfd calls mcopy_atomic_pte() and __mcopy_atomic() which do not
do any cache flushing for the target page. Then the target page will be
mapped to the user space with a different address (user address), which
might have an alias issue with the kernel address used to copy the data
from the user to. Fix this by insert flush_dcache_page() after
copy_from_user() succeeds.
Link: https://lkml.kernel.org/r/20220210123058.79206-7-songmuchun@bytedance.com
Fixes:
b6ebaedb4cb1 ("userfaultfd: avoid mmap_sem read recursion in mcopy_atomic")
Fixes:
c1a4de99fada ("userfaultfd: mcopy_atomic|mfill_zeropage: UFFDIO_COPY|UFFDIO_ZEROPAGE preparation")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Muchun Song [Tue, 22 Mar 2022 21:42:05 +0000 (14:42 -0700)]
mm: shmem: fix missing cache flush in shmem_mfill_atomic_pte()
commit
19b482c29b6f3805f1d8e93015847b89e2f7f3b1 upstream.
userfaultfd calls shmem_mfill_atomic_pte() which does not do any cache
flushing for the target page. Then the target page will be mapped to
the user space with a different address (user address), which might have
an alias issue with the kernel address used to copy the data from the
user to. Insert flush_dcache_page() in non-zero-page case. And replace
clear_highpage() with clear_user_highpage() which already considers the
cache maintenance.
Link: https://lkml.kernel.org/r/20220210123058.79206-6-songmuchun@bytedance.com
Fixes:
8d1039634206 ("userfaultfd: shmem: add shmem_mfill_zeropage_pte for userfaultfd support")
Fixes:
4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Muchun Song [Tue, 22 Mar 2022 21:41:59 +0000 (14:41 -0700)]
mm: hugetlb: fix missing cache flush in copy_huge_page_from_user()
commit
e763243cc6cb1fcc720ec58cfd6e7c35ae90a479 upstream.
userfaultfd calls copy_huge_page_from_user() which does not do any cache
flushing for the target page. Then the target page will be mapped to
the user space with a different address (user address), which might have
an alias issue with the kernel address used to copy the data from the
user to.
Fix this issue by flushing dcache in copy_huge_page_from_user().
Link: https://lkml.kernel.org/r/20220210123058.79206-4-songmuchun@bytedance.com
Fixes:
fa4d75c1de13 ("userfaultfd: hugetlbfs: add copy_huge_page_from_user for hugetlb userfaultfd support")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Muchun Song [Tue, 22 Mar 2022 21:41:56 +0000 (14:41 -0700)]
mm: fix missing cache flush for all tail pages of compound page
commit
2771739a7162782c0aa6424b2e3dd874e884a15d upstream.
The D-cache maintenance inside move_to_new_page() only consider one
page, there is still D-cache maintenance issue for tail pages of
compound page (e.g. THP or HugeTLB).
THP migration is only enabled on x86_64, ARM64 and powerpc, while
powerpc and arm64 need to maintain the consistency between I-Cache and
D-Cache, which depends on flush_dcache_page() to maintain the
consistency between I-Cache and D-Cache.
But there is no issues on arm64 and powerpc since they already considers
the compound page cache flushing in their icache flush function.
HugeTLB migration is enabled on arm, arm64, mips, parisc, powerpc,
riscv, s390 and sh, while arm has handled the compound page cache flush
in flush_dcache_page(), but most others do not.
In theory, the issue exists on many architectures. Fix this by not
using flush_dcache_folio() since it is not backportable.
Link: https://lkml.kernel.org/r/20220210123058.79206-3-songmuchun@bytedance.com
Fixes:
290408d4a250 ("hugetlb: hugepage migration core")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Tue, 10 May 2022 10:36:04 +0000 (12:36 +0200)]
udf: Avoid using stale lengthOfImpUse
commit
c1ad35dd0548ce947d97aaf92f7f2f9a202951cf upstream.
udf_write_fi() uses lengthOfImpUse of the entry it is writing to.
However this field has not yet been initialized so it either contains
completely bogus value or value from last directory entry at that place.
In either case this is wrong and can lead to filesystem corruption or
kernel crashes.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
CC: stable@vger.kernel.org
Fixes:
979a6e28dd96 ("udf: Get rid of 0-length arrays in struct fileIdentDesc")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gleb Fotengauer-Malinovskiy [Fri, 6 May 2022 17:24:54 +0000 (17:24 +0000)]
rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
commit
a36e07dfe6ee71e209383ea9288cd8d1617e14f9 upstream.
The definition of RFKILL_IOCTL_MAX_SIZE introduced by commit
54f586a91532 ("rfkill: make new event layout opt-in") is unusable
since it is based on RFKILL_IOC_EXT_SIZE which has not been defined.
Fix that by replacing the undefined constant with the constant which
is intended to be used in this definition.
Fixes:
54f586a91532 ("rfkill: make new event layout opt-in")
Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Link: https://lore.kernel.org/r/20220506172454.120319-1-glebfm@altlinux.org
[add commit message provided later by Dmitry]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Itay Iellin [Sat, 7 May 2022 12:32:48 +0000 (08:32 -0400)]
Bluetooth: Fix the creation of hdev->name
commit
103a2f3255a95991252f8f13375c3a96a75011cd upstream.
Set a size limit of 8 bytes of the written buffer to "hdev->name"
including the terminating null byte, as the size of "hdev->name" is 8
bytes. If an id value which is greater than 9999 is allocated,
then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)"
function call would lead to a truncation of the id value in decimal
notation.
Set an explicit maximum id parameter in the id allocation function call.
The id allocation function defines the maximum allocated id value as the
maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined
as 10000.
Signed-off-by: Itay Iellin <ieitayie@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Wed, 23 Mar 2022 22:35:01 +0000 (23:35 +0100)]
objtool: Fix SLS validation for kcov tail-call replacement
[ Upstream commit
7a53f408902d913cd541b4f8ad7dbcd4961f5b82 ]
Since not all compilers have a function attribute to disable KCOV
instrumentation, objtool can rewrite KCOV instrumentation in noinstr
functions as per commit:
f56dae88a81f ("objtool: Handle __sanitize_cov*() tail calls")
However, this has subtle interaction with the SLS validation from
commit:
1cc1e4c8aab4 ("objtool: Add straight-line-speculation validation")
In that when a tail-call instrucion is replaced with a RET an
additional INT3 instruction is also written, but is not represented in
the decoded instruction stream.
This then leads to false positive missing INT3 objtool warnings in
noinstr code.
Instead of adding additional struct instruction objects, mark the RET
instruction with retpoline_safe to suppress the warning (since we know
there really is an INT3).
Fixes:
1cc1e4c8aab4 ("objtool: Add straight-line-speculation validation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220323230712.GA8939@worktop.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Wed, 23 Mar 2022 23:05:55 +0000 (00:05 +0100)]
crypto: x86/poly1305 - Fixup SLS
[ Upstream commit
7ed7aa4de9421229be6d331ed52d5cd09c99f409 ]
Due to being a perl generated asm file, it got missed by the mass
convertion script.
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_init_x86_64()+0x3a: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_x86_64()+0xf2: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_emit_x86_64()+0x37: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: __poly1305_block()+0x6d: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: __poly1305_init_avx()+0x1e8: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx()+0x18a: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx()+0xaf8: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_emit_avx()+0x99: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx2()+0x18a: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx2()+0x776: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx512()+0x18a: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx512()+0x796: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx512()+0x10bd: missing int3 after ret
Fixes:
f94909ceb1ed ("x86: Prepare asm files for straight-line-speculation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Wed, 16 Mar 2022 21:05:52 +0000 (22:05 +0100)]
kvm/emulate: Fix SETcc emulation function offsets with SLS
[ Upstream commit
fe83f5eae432ccc8e90082d6ed506d5233547473 ]
The commit in Fixes started adding INT3 after RETs as a mitigation
against straight-line speculation.
The fastop SETcc implementation in kvm's insn emulator uses macro magic
to generate all possible SETcc functions and to jump to them when
emulating the respective instruction.
However, it hardcodes the size and alignment of those functions to 4: a
three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an
INT3 that gets slapped after the RET, which brings the whole scheme out
of alignment:
15: 0f 90 c0 seto %al
18: c3 ret
19: cc int3
1a: 0f 1f 00 nopl (%rax)
1d: 0f 91 c0 setno %al
20: c3 ret
21: cc int3
22: 0f 1f 00 nopl (%rax)
25: 0f 92 c0 setb %al
28: c3 ret
29: cc int3
and this explodes like this:
int3: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 2435 Comm: qemu-system-x86 Not tainted 5.17.0-rc8-sls #1
Hardware name: Dell Inc. Precision WorkStation T3400 /0TP412, BIOS A14 04/30/2012
RIP: 0010:setc+0x5/0x8 [kvm]
Code: 00 00 0f 1f 00 0f b6 05 43 24 06 00 c3 cc 0f 1f 80 00 00 00 00 0f 90 c0 c3 cc 0f \
1f 00 0f 91 c0 c3 cc 0f 1f 00 0f 92 c0 c3 cc <0f> 1f 00 0f 93 c0 c3 cc 0f 1f 00 \
0f 94 c0 c3 cc 0f 1f 00 0f 95 c0
Call Trace:
<TASK>
? x86_emulate_insn [kvm]
? x86_emulate_instruction [kvm]
? vmx_handle_exit [kvm_intel]
? kvm_arch_vcpu_ioctl_run [kvm]
? kvm_vcpu_ioctl [kvm]
? __x64_sys_ioctl
? do_syscall_64
? entry_SYSCALL_64_after_hwframe
</TASK>
Raise the alignment value when SLS is enabled and use a macro for that
instead of hard-coding naked numbers.
Fixes:
e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net
[Add a comment and a bit of safety checking, since this is going to be changed
again for IBT support. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 13:19:37 +0000 (10:19 -0300)]
tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
[ Upstream commit
35cb8c713a496e8c114eed5e2a5a30b359876df2 ]
To bring in the change made in this cset:
f94909ceb1ed4bfd ("x86: Prepare asm files for straight-line-speculation")
It silences these perf tools build warnings, no change in the tools:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
The code generated was checked before and after using 'objdump -d /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o',
no changes.
Cc: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Sat, 4 Dec 2021 13:43:44 +0000 (14:43 +0100)]
x86: Add straight-line-speculation mitigation
[ Upstream commit
e463a09af2f0677b9485a7e8e4e70b396b2ffb6f ]
Make use of an upcoming GCC feature to mitigate
straight-line-speculation for x86:
https://gcc.gnu.org/g:
53a643f8568067d7700a9f2facc8ba39974973d3
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102952
https://bugs.llvm.org/show_bug.cgi?id=52323
It's built tested on x86_64-allyesconfig using GCC-12 and GCC-11.
Maintenance overhead of this should be fairly low due to objtool
validation.
Size overhead of all these additional int3 instructions comes to:
text data bss dec hex filename
22267751 6933356 2011368
31212475 1dc43bb defconfig-build/vmlinux
22804126 6933356 1470696
31208178 1dc32f2 defconfig-build/vmlinux.sls
Or roughly 2.4% additional text.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.140103474@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Tue, 31 Aug 2021 07:39:52 +0000 (16:39 +0900)]
kbuild: move objtool_args back to scripts/Makefile.build
[ Upstream commit
8f0c32c788fffa8e88f995372415864039347c8a ]
Commit
b1a1a1a09b46 ("kbuild: lto: postpone objtool") moved objtool_args
to Makefile.lib, so the arguments can be used in Makefile.modfinal as
well as Makefile.build.
With commit
850ded46c642 ("kbuild: Fix TRIM_UNUSED_KSYMS with
LTO_CLANG"), module LTO linking came back to scripts/Makefile.build
again.
So, there is no more reason to keep objtool_args in a separate file.
Get it back to the original place, close to the objtool command.
Remove the stale comment too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Sat, 4 Dec 2021 13:43:43 +0000 (14:43 +0100)]
x86/alternative: Relax text_poke_bp() constraint
[ Upstream commit
26c44b776dba4ac692a0bf5a3836feb8a63fea6b ]
Currently, text_poke_bp() is very strict to only allow patching a
single instruction; however with straight-line-speculation it will be
required to patch: ret; int3, which is two instructions.
As such, relax the constraints a little to allow int3 padding for all
instructions that do not imply the execution of the next instruction,
ie: RET, JMP.d8 and JMP.d32.
While there, rename the text_poke_loc::rel32 field to ::disp.
Note: this fills up the text_poke_loc structure which is now a round
16 bytes big.
[ bp: Put comments ontop instead of on the side. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.082342723@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Sat, 4 Dec 2021 13:43:42 +0000 (14:43 +0100)]
objtool: Add straight-line-speculation validation
[ Upstream commit
1cc1e4c8aab4213bd4e6353dec2620476a233d6d ]
Teach objtool to validate the straight-line-speculation constraints:
- speculation trap after indirect calls
- speculation trap after RET
Notable: when an instruction is annotated RETPOLINE_SAFE, indicating
speculation isn't a problem, also don't care about sls for that
instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.023037659@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Sat, 4 Dec 2021 13:43:41 +0000 (14:43 +0100)]
x86: Prepare inline-asm for straight-line-speculation
[ Upstream commit
b17c2baa305cccbd16bafa289fd743cc2db77966 ]
Replace all ret/retq instructions with ASM_RET in preparation of
making it more than a single instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.964635458@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Sat, 4 Dec 2021 13:43:40 +0000 (14:43 +0100)]
x86: Prepare asm files for straight-line-speculation
[ Upstream commit
f94909ceb1ed4bfdb2ada72f93236305e6d6951f ]
Replace all ret/retq instructions with RET in preparation of making
RET a macro. Since AS is case insensitive it's a big no-op without
RET defined.
find arch/x86/ -name \*.S | while read file
do
sed -i 's/\<ret[q]*\>/RET/' $file
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.905503893@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Sat, 4 Dec 2021 13:43:39 +0000 (14:43 +0100)]
x86/lib/atomic64_386_32: Rename things
[ Upstream commit
22da5a07c75e1104caf6a42f189c97b83d070073 ]
Principally, in order to get rid of #define RET in this code to make
place for a new RET, but also to clarify the code, rename a bunch of
things:
s/UNLOCK/IRQ_RESTORE/
s/LOCK/IRQ_SAVE/
s/BEGIN/BEGIN_IRQ_SAVE/
s/\<RET\>/RET_IRQ_RESTORE/
s/RET_ENDP/\tRET_IRQ_RESTORE\rENDP/
which then leaves RET unused so it can be removed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.841623970@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 12 May 2022 10:30:34 +0000 (12:30 +0200)]
Linux 5.15.39
Link: https://lore.kernel.org/r/20220510130740.392653815@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Behún [Wed, 4 May 2022 16:57:55 +0000 (18:57 +0200)]
PCI: aardvark: Update comment about link going down after link-up
commit
92f4ffecc4170ce29e67a1f8d51c168c3de95fb2 upstream.
Update the comment about what happens when link goes down after we have
checked for link-up. If a PIO request is done while link-down, we have
a serious problem.
Link: https://lore.kernel.org/r/20220110015018.26359-23-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Behún [Wed, 4 May 2022 16:57:54 +0000 (18:57 +0200)]
PCI: aardvark: Drop __maybe_unused from advk_pcie_disable_phy()
commit
0c36ab437e1d94b6628b006a1d48f05ea3b0b222 upstream.
This function is now always used in driver remove method, drop the
__maybe_unused attribute.
Link: https://lore.kernel.org/r/20220110015018.26359-22-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:53 +0000 (18:57 +0200)]
PCI: aardvark: Don't mask irq when mapping
commit
befa71000160b39c1bf6cdfca6837bb5e9d372d7 upstream.
By default, all Legacy INTx interrupts are masked, so there is no need to
mask this interrupt during irq_map() callback.
Link: https://lore.kernel.org/r/20220110015018.26359-21-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:52 +0000 (18:57 +0200)]
PCI: aardvark: Remove irq_mask_ack() callback for INTx interrupts
commit
b08e5b53d17be58eb2311d6790a84fe2c200ee47 upstream.
Callback for irq_mask_ack() is the same as for irq_mask(). As there is no
special handling for irq_ack(), there is no need to define irq_mask_ack()
too.
Link: https://lore.kernel.org/r/20220110015018.26359-20-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:51 +0000 (18:57 +0200)]
PCI: aardvark: Use separate INTA interrupt for emulated root bridge
commit
815bc313686783e3a1823ec0efc332c70e6bd976 upstream.
Emulated root bridge currently provides only one Legacy INTA interrupt
which is used for reporting PCIe PME and ERR events and handled by kernel
PCIe PME and AER drivers.
Aardvark HW reports these PME and ERR events separately, so there is no
need to mix real INTA interrupt and emulated INTA interrupt for PCIe PME
and AER drivers.
Register a new advk-RP (as in Root Port) irq chip and a new irq domain
for emulated root bridge and use this new separate irq domain for
providing INTA interrupt from emulated root bridge for PME and ERR events.
The real INTA interrupt from real devices is now separate.
A custom map_irq callback function on PCI host bridge structure is used to
allocate IRQ mapping for emulated root bridge from new irq domain. Original
callback of_irq_parse_and_map_pci() is used for all other devices as before.
Link: https://lore.kernel.org/r/20220110015018.26359-19-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:50 +0000 (18:57 +0200)]
PCI: aardvark: Fix support for PME requester on emulated bridge
commit
273ddd86d67694e3639e3bfe337a96d8861798b8 upstream.
Enable aardvark PME interrupt unconditionally by unmasking it and read PME
requester ID to emulated bridge config space immediately after receiving
interrupt.
PME requester ID is stored in the PCIE_MSG_LOG_REG register, which contains
the last inbound message. So when new inbound message is received by HW
(including non-PM), the content in PCIE_MSG_LOG_REG register is replaced by
a new value.
PCIe specification mandates that subsequent PMEs are kept pending until the
PME Status Register bit is cleared by software by writing a 1b.
Support for masking/unmasking PME interrupt on emulated bridge via
PCI_EXP_RTCTL_PMEIE bit is now implemented only in emulated bridge config
space, to ensure that we do not miss any aardvark PME interrupt.
Reading of PCI_EXP_RTCAP and PCI_EXP_RTSTA registers is simplified as final
value is now always stored into emulated bridge config space by the
interrupt handler, so there is no need to implement support for these
registers in read_pcie callback.
Clearing of W1C bit PCI_EXP_RTSTA_PME is now also simplified as it is done
by pci-bridge-emul.c code for emulated bridge config space. So there is no
need to implement support for clearing this bit in write_pcie callback.
Link: https://lore.kernel.org/r/20220110015018.26359-18-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:49 +0000 (18:57 +0200)]
PCI: aardvark: Add support for PME interrupts
commit
0fc75d87454195885bd1a81fc7e6ce92572b6109 upstream.
Currently enabling PCI_EXP_RTSTA_PME bit in PCI_EXP_RTCTL register does
nothing. This is because PCIe PME driver expects to receive PCIe interrupt
defined in PCI_EXP_FLAGS_IRQ register, but aardvark hardware does not
trigger PCIe INTx/MSI interrupt for PME event, rather it triggers custom
aardvark interrupt which this driver is not processing yet.
Fix this issue by handling PME interrupt in advk_pcie_handle_int() and
chaining it to PCIe interrupt 0 with generic_handle_domain_irq() (since
aardvark sets PCI_EXP_FLAGS_IRQ to zero). With this change PCIe PME driver
finally starts receiving PME interrupt.
Link: https://lore.kernel.org/r/20220110015018.26359-17-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:48 +0000 (18:57 +0200)]
PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME on emulated bridge
commit
7122bcb33295228c882c0aa32a04b2547beba2c3 upstream.
To optimize advk_pci_bridge_emul_pcie_conf_write() code, touch
PCIE_ISR0_REG and PCIE_ISR0_MASK_REG registers only when it is really
needed, when processing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME bits.
Link: https://lore.kernel.org/r/20220110015018.26359-16-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:47 +0000 (18:57 +0200)]
PCI: aardvark: Add support for ERR interrupt on emulated bridge
commit
3ebfefa396ebee21061fd5fa36073368ed2cd467 upstream.
ERR interrupt is triggered when corresponding bit is unmasked in both ISR0
and PCI_EXP_DEVCTL registers. Unmasking ERR bits in PCI_EXP_DEVCTL register
is not enough. This means that currently the ERR interrupt is never
triggered.
Unmask ERR bits in ISR0 register at driver probe time. ERR interrupt is not
triggered until ERR bits are unmasked also in PCI_EXP_DEVCTL register,
which is done by AER driver. So it is safe to unconditionally unmask all
ERR bits in aardvark probe.
Aardvark HW sets PCI_ERR_ROOT_AER_IRQ to zero and when corresponding bits
in ISR0 and PCI_EXP_DEVCTL are enabled, the HW triggers a generic interrupt
on GIC. Chain this interrupt to PCIe interrupt 0 with
generic_handle_domain_irq() to allow processing of ERR interrupts.
Link: https://lore.kernel.org/r/20220110015018.26359-14-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:46 +0000 (18:57 +0200)]
PCI: aardvark: Enable MSI-X support
commit
754e449889b22fc3c34235e8836f08f51121d307 upstream.
According to PCI 3.0 specification, sending both MSI and MSI-X interrupts
is done by DWORD memory write operation to doorbell message address. The
write operation for MSI has zero upper 16 bits and the MSI interrupt number
in the lower 16 bits, while the write operation for MSI-X contains a 32-bit
value from MSI-X table.
Since the driver only uses interrupt numbers from range 0..31, the upper
16 bits of the DWORD memory write operation to doorbell message address
are zero even for MSI-X interrupts. Thus we can enable MSI-X interrupts.
Testing proves that kernel can correctly receive MSI-X interrupts from PCIe
cards which supports both MSI and MSI-X interrupts.
Link: https://lore.kernel.org/r/20220110015018.26359-13-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:45 +0000 (18:57 +0200)]
PCI: aardvark: Fix setting MSI address
commit
46ad3dc4171b5ee1d12267d70112563d5760210a upstream.
MSI address for receiving MSI interrupts needs to be correctly set before
enabling processing of MSI interrupts.
Move code for setting PCIE_MSI_ADDR_LOW_REG and PCIE_MSI_ADDR_HIGH_REG
from advk_pcie_init_msi_irq_domain() to advk_pcie_setup_hw(), before
enabling PCIE_CORE_CTRL2_MSI_ENABLE.
After this we can remove the now unused member msi_msg, which was used
only for MSI doorbell address. MSI address can be any address which cannot
be used to DMA to. So change it to the address of the main struct advk_pcie.
Link: https://lore.kernel.org/r/20220110015018.26359-12-kabel@kernel.org
Fixes:
8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org # f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:44 +0000 (18:57 +0200)]
PCI: aardvark: Add support for masking MSI interrupts
commit
e77d9c90691071769cd2b86ef097f7d07167dc3b upstream.
We should not unmask MSIs at setup, but only when kernel asks for them
to be unmasked.
At setup, mask all MSIs, and implement IRQ chip callbacks for masking
and unmasking particular MSIs.
Link: https://lore.kernel.org/r/20220110015018.26359-11-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:43 +0000 (18:57 +0200)]
PCI: aardvark: Refactor unmasking summary MSI interrupt
commit
4689c0916320f112a8a33f2689d3addc3262f02c upstream.
Refactor the masking of ISR0/1 Sources and unmasking of summary MSI interrupt
so that it corresponds to the comments:
- first mask all ISR0/1
- then unmask all MSIs
- then unmask summary MSI interrupt
Link: https://lore.kernel.org/r/20220110015018.26359-10-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Behún [Wed, 4 May 2022 16:57:42 +0000 (18:57 +0200)]
PCI: aardvark: Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node)
commit
222af78532fa299cd9b1008e49c347b7f5a45c17 upstream.
Use simple
dev_fwnode(dev)
instead of
struct device_node *node = dev->of_node;
of_node_to_fwnode(node)
especially since the node variable is not used elsewhere in the function.
Link: https://lore.kernel.org/r/20220110015018.26359-9-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Behún [Wed, 4 May 2022 16:57:41 +0000 (18:57 +0200)]
PCI: aardvark: Make msi_domain_info structure a static driver structure
commit
26bcd54e4a5cd51ec12d06fdc30e22863ed4c422 upstream.
Make Aardvark's msi_domain_info structure into a private driver structure.
Domain info is same for every potential instatination of a controller.
Link: https://lore.kernel.org/r/20220110015018.26359-8-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Behún [Wed, 4 May 2022 16:57:40 +0000 (18:57 +0200)]
PCI: aardvark: Make MSI irq_chip structures static driver structures
commit
c3cb8e51839adc0aaef478c47665443d02f5aa07 upstream.
In [1] it was agreed that we should use struct irq_chip as a global
static struct in the driver. Even though the structure currently
contains a dynamic member (parent_device), In [2] the plans to kill it
and make the structure completely static were set out.
Convert Aardvark's priv->msi_bottom_irq_chip and priv->msi_irq_chip to
static driver structure.
[1] https://lore.kernel.org/linux-pci/877dbcvngf.wl-maz@kernel.org/
[2] https://lore.kernel.org/linux-pci/874k6gvkhz.wl-maz@kernel.org/
Link: https://lore.kernel.org/r/20220110015018.26359-7-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:39 +0000 (18:57 +0200)]
PCI: aardvark: Check return value of generic_handle_domain_irq() when processing INTx IRQ
commit
51f96e287c6f003d3bb29672811c757c5fbf0028 upstream.
It is possible that we receive spurious INTx interrupt. Check for the
return value of generic_handle_domain_irq() when processing INTx IRQ.
Link: https://lore.kernel.org/r/20220110015018.26359-6-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:38 +0000 (18:57 +0200)]
PCI: aardvark: Rewrite IRQ code to chained IRQ handler
commit
1571d67dc190e50c6c56e8f88cdc39f7cc53166e upstream.
Rewrite the code to use irq_set_chained_handler_and_data() handler with
chained_irq_enter() and chained_irq_exit() processing instead of using
devm_request_irq().
advk_pcie_irq_handler() reads IRQ status bits and calls other functions
based on which bits are set. These functions then read its own IRQ status
bits and calls other aardvark functions based on these bits. Finally
generic_handle_domain_irq() with translated linux IRQ numbers are called.
Link: https://lore.kernel.org/r/20220110015018.26359-5-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:37 +0000 (18:57 +0200)]
PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with PCI_INTERRUPT_*
commit
1d86abf1f89672a70f2ab65f6000299feb1f1781 upstream.
Header file linux/pci.h defines enum pci_interrupt_pin with corresponding
PCI_INTERRUPT_* values.
Link: https://lore.kernel.org/r/20220110015018.26359-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:36 +0000 (18:57 +0200)]
PCI: aardvark: Disable common PHY when unbinding driver
commit
fdbbe242c15a8f2cd0e3ad8a56cd0a447b771d0d upstream.
Disable the PCIe PHY when unbinding driver. This should save some power.
Link: https://lore.kernel.org/r/20211130172913.9727-12-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:35 +0000 (18:57 +0200)]
PCI: aardvark: Disable link training when unbinding driver
commit
759dec2e3dfdbd261c41d2279f04f2351c971a49 upstream.
Disable link training circuit in driver unbind sequence. We want to
leave link training in the same state as it was before the driver was
probed.
Link: https://lore.kernel.org/r/20211130172913.9727-11-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:34 +0000 (18:57 +0200)]
PCI: aardvark: Assert PERST# when unbinding driver
commit
1f54391be8ce0c981d312cb93acdc5608def576a upstream.
Put the PCIe card into reset by asserting PERST# signal when unbinding
driver. It doesn't make sense to leave the card working if it can't
communicate with the host. This should also save some power.
Link: https://lore.kernel.org/r/20211130172913.9727-10-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:33 +0000 (18:57 +0200)]
PCI: aardvark: Fix memory leak in driver unbind
commit
2f040a17f5061457ae95035326d3159eddc1e5cc upstream.
Free config space for emulated root bridge when unbinding driver to fix
memory leak. Do it after disabling and masking all interrupts, since
aardvark interrupt handler accesses config space of emulated root
bridge.
Link: https://lore.kernel.org/r/20211130172913.9727-9-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:32 +0000 (18:57 +0200)]
PCI: aardvark: Mask all interrupts when unbinding driver
commit
13bcdf07cb2ecff5d45d2c141df2539b15211448 upstream.
Ensure that no interrupt can be triggered after driver unbind.
Link: https://lore.kernel.org/r/20211130172913.9727-8-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 4 May 2022 16:57:31 +0000 (18:57 +0200)]
PCI: aardvark: Disable bus mastering when unbinding driver
commit
a46f2f6dd4093438d9615dfbf5c0fea2a9835dba upstream.
Ensure that after driver unbind PCIe cards are not able to forward
memory and I/O requests in the upstream direction.
Link: https://lore.kernel.org/r/20211130172913.9727-7-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>