review.tizen.org Git - platform/kernel/linux-rpi.git/log

dt-bindings: display: sun6i-dsi: Add the A100 variant

The "40nm" MIPI DSI controller found in the A100 and D1 SoCs has the
same register layout as previous SoC integrations. However, its module
clock now comes from the TCON, which means it no longer runs at a fixed
rate, so this needs to be distinguished in the driver.

The controller also now uses pins on Port D instead of dedicated pins,
so it drops the separate power domain.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221107053552.2330-3-samuel@sholland.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

dt-bindings: display: sun6i-dsi: Fix clock conditional

The A64 case should have limited maxItems, instead of duplicating the
minItems value from the main binding. While here, simplify the binding
by making this an "else" case of the two-clock conditional block.

Fixes: fe5040f2843a ("dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221107053552.2330-2-samuel@sholland.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/fb-helper: Clarify use of last_close and output_poll_changed

Clarify documentation in the use of struct drm_driver.last_close and
struct drm_mode_config_funcs.output_poll_changed. Those callbacks should
not be said for fbdev implementations on top of struct drm_client_funcs.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-24-tzimmermann@suse.de

drm/fb-helper: Remove unnecessary include statements

Remove include statements for <drm/drm_fb_helper.h> where it is not
required (i.e., most of them). In a few places include other header
files that are required by the source code.

v3:
* fix amdgpu include statements
* fix rockchip include statements

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-23-tzimmermann@suse.de

drm/fb-helper: Move generic fbdev emulation into separate source file

Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.

v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de

drm/fb-helper: Set flag in struct drm_fb_helper for leaking physical addresses

Uncouple the parameter drm_leak_fbdev_smem from the implementation by
setting a flag in struct drm_fb_helper. This will help to move the
generic fbdev emulation into its own source file, while keeping the
parameter in drm_fb_helper.c. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-21-tzimmermann@suse.de

drm/fb-helper: Always initialize generic fbdev emulation

Initialize the generic fbdev emulation even if it has been disabled
on the kernel command line. The hotplug and mode initialization will
fail accordingly.

The kernel parameter can still be changed at runtime and the emulation
will initialize after hotplugging the connector.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-20-tzimmermann@suse.de

drm/fb_helper: Minimize damage-helper overhead

Pull the test for fb_dirty into the caller to avoid extra work
if no callback has been set. In this case no damage handling is
required and no damage area needs to be computed. Print a warning
if the damage worker runs without getting an fb_dirty callback.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-19-tzimmermann@suse.de

drm/fb-helper: Perform all fbdev I/O with the same implementation

Implement the fbdev's read/write helpers with the same functions. Use
the generic fbdev's code as template. Convert all drivers.

DRM's fb helpers must implement regular I/O functionality in struct
fb_ops and possibly perform a damage update. Handle all this in the
same functions and convert drivers. The functionality has been used
as part of the generic fbdev code for some time. The drivers don't
set struct drm_fb_helper.fb_dirty, so they will not be affected by
damage handling.

For I/O memory, fb helpers now provide drm_fb_helper_cfb_read() and
drm_fb_helper_cfb_write(). Several drivers require these. Until now
tegra used I/O read and write, although the memory buffer appears to
be in system memory. So use _sys_ helpers now.

v3:
* fix docs (Javier)
v2:
* rebase onto vmwgfx changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-18-tzimmermann@suse.de

drm/fb-helper: Call fb_sync in I/O functions

Call struct fb_ops.fb_sync in drm_fbdev_{read,write}() to mimic the
behavior of fbdev. Fbdev implementations of fb_read and fb_write in
struct fb_ops invoke fb_sync to synchronize with outstanding operations
before I/O. Doing the same in DRM implementations will allow us to use
them throughout DRM drivers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-17-tzimmermann@suse.de

drm/fb-helper: Disconnect damage worker from update logic

The fbdev helpers implement a damage worker that forwards fbdev
updates to the DRM driver. The worker's update logic depends on
the generic fbdev emulation. Separate the two via function pointer.

The generic fbdev emulation sets struct drm_fb_helper_funcs.fb_dirty,
a new callback that hides the update logic from the damage worker.
It's not possible to use the generic logic with other fbdev emulation,
because it contains additional code for the shadow buffering that
the generic emulation employs.

DRM drivers with internal fbdev emulation can set fb_dirty to their
own implementation if they require damage handling; although no such
drivers currently exist.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-16-tzimmermann@suse.de

drm/fb-helper: Rename drm_fb_helper_unregister_fbi() to use _info postfix

Rename drm_fb_helper_unregister_fbi() to drm_fb_helper_unregister_info()
as part of unifying the naming within fbdev helpers. Adapt drivers. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-15-tzimmermann@suse.de

drm/fb-helper: Rename drm_fb_helper_alloc_fbi() to use _info postfix

Rename drm_fb_helper_alloc_fbi() to drm_fb_helper_alloc_info() as
part of unifying the naming within fbdev helpers. Adapt drivers. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-14-tzimmermann@suse.de

drm/fb_helper: Rename field fbdev to info in struct drm_fb_helper

Rename struct drm_fb_helper.fbdev to info. The current name is
misleading as it overlaps with generic fbdev naming conventions.
Adapt to the usual naming in fbdev drivers by calling the field
'info'. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-13-tzimmermann@suse.de

drm/fb-helper: Cleanup include statements in header file

Only include what we have to.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-12-tzimmermann@suse.de

drm/tve200: Include <linux/of.h>

Include <linux/of.h> for of_match_ptr().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-11-tzimmermann@suse.de

drm/panel-ili9341: Include <linux/backlight.h>

Include <linux/backlight.h> for devm_of_find_backlight().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-10-tzimmermann@suse.de

drm/rockchip: Don't set struct drm_driver.output_poll_changed

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as rockchip uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
* fix commit description (Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-9-tzimmermann@suse.de

drm/logicvc: Don't set struct drm_driver.output_poll_changed

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as logicvc uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
* fix commit description (Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-8-tzimmermann@suse.de

drm/ingenic: Don't set struct drm_driver.output_poll_changed

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as ingenic uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
* fix commit description (Christian, Sergey)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-7-tzimmermann@suse.de

drm/imx/dcss: Don't set struct drm_driver.output_poll_changed

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as DCSS uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
* fix commit description (Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-6-tzimmermann@suse.de

drm/amdgpu: Don't set struct drm_driver.output_poll_changed

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as amdgpu uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
* fix commit description (Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-5-tzimmermann@suse.de

drm/vboxvideo: Don't set struct drm_driver.lastclose

Don't set struct drm_driver.lastclose. It's used to restore the
fbdev console. But as vboxvideo uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See
the call to drm_client_dev_restore() in drm_lastclose().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-4-tzimmermann@suse.de

drm/mcde: Don't set struct drm_driver.lastclose

Don't set struct drm_driver.lastclose. It's used to restore the
fbdev console. But as mcde uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See
the call to drm_client_dev_restore() in drm_lastclose().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-3-tzimmermann@suse.de

drm/komeda: Don't set struct drm_driver.lastclose

Don't set struct drm_driver.lastclose. It's used to restore the
fbdev console. But as komeda uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See
the call to drm_client_dev_restore() in drm_lastclose().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-2-tzimmermann@suse.de

Merge drm/drm-next into drm-misc-next

Backmerging drm/drm-next to get the latest changes in the xlnx driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm/ofdrm: Cast error pointers to void __iomem *

Cast error pointers when returning them as void __iomem *. Fixes
a number of Sparse warnings, such as the ones shown below.

../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces)
../drivers/gpu/drm/tiny/ofdrm.c:439:31:    expected void [noderef] __iomem *
../drivers/gpu/drm/tiny/ofdrm.c:439:31:    got void *
../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces)
../drivers/gpu/drm/tiny/ofdrm.c:442:31:    expected void [noderef] __iomem *
../drivers/gpu/drm/tiny/ofdrm.c:442:31:    got void *

See [1] for the bug report.

v3:
* use IOMEM_ERR_PTR() (Javier)

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/
Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de

drm/ofdrm: Convert PCI IDs to CPU endianness for comparing

Properties of 32-bit integers are returned from the OF device tree
as type __be32. Convert PCI vendor and device IDs from __be32 to host
endianness before comparing them to constants. All relevant machines
are old, big-endian Macintosh systems; hence the bug never happened
in practice.

Fixes sparse warnings shown below.

  drivers/gpu/drm/tiny/ofdrm.c:237:17: warning: restricted __be32 degrades to integer
  drivers/gpu/drm/tiny/ofdrm.c:238:18: warning: restricted __be32 degrades to integer
  drivers/gpu/drm/tiny/ofdrm.c:238:54: warning: restricted __be32 degrades to integer

See [1] for the bug report.

v2:
* convert endianness (Alex)

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/dri-devel/202210192208.D888I6X7-lkp@intel.com/
Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-2-tzimmermann@suse.de

drm/ingenic: Fix missing platform_driver_unregister() call in ingenic_drm_init()

A problem about modprobe ingenic-drm failed is triggered with the following
log given:

[  303.561088] Error: Driver 'ingenic-ipu' is already registered, aborting...
modprobe: ERROR: could not insert 'ingenic_drm': Device or resource busy

The reason is that ingenic_drm_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without unregistering ingenic_ipu_driver_ptr, resulting
the ingenic-drm can never be installed later.
A simple call graph is shown as below:

ingenic_drm_init()
   platform_driver_register() # ingenic_ipu_driver_ptr are registered
   platform_driver_register()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without unregister ingenic_ipu_driver_ptr

Fixing this problem by checking the return value of
platform_driver_register() and do platform_unregister_drivers() if
error happened.

Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221104064512.8569-1-yuancan@huawei.com

Merge tag 'drm-intel-gt-next-2022-11-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

- Fix for #7306: [Arc A380] white flickering when using arc as a
secondary gpu (Matt A)
- Add Wa_18017747507 for DG2 (Wayne)
- Avoid spurious WARN on DG1 due to incorrect cache_dirty flag
(Niranjana, Matt A)
- Corrections to CS timestamp support for Gen5 and earlier (Ville)

- Fix a build error used with clang compiler on hwmon (GG)
- Improvements to LMEM handling with RPM (Anshuman, Matt A)
- Cleanups in dmabuf code (Mike)

- Selftest improvements (Matt A)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com

Merge tag 'drm-misc-next-2022-11-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 6.2:

UAPI Changes:

Cross-subsystem Changes:
- dma-buf: locking improvements
- firmware: New API in the RaspberryPi firmware driver used by vc4

Core Changes:
- client: Null pointer dereference fix in drm_client_buffer_delete()
- mm/buddy: Add back random seed log
- ttm: Convert ttm_resource to use size_t for its size, fix for an
  undefined behaviour

Driver Changes:
- bridge:
  - adv7511: use dev_err_probe
  - it6505: Fix return value check of pm_runtime_get_sync
- panel:
  - sitronix: Fixes and clean-ups
- lcdif: Increase DMA burst size
- rockchip: runtime_pm improvements
- vc4: Fix for a regression preventing the use of 4k @ 60Hz, and
  further HDMI rate constraints check.
- vmwgfx: Cursor improvements

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103083437.ksrh3hcdvxaof62l@houat

drm/scheduler: rename dependency callback into prepare_job

This now matches much better what this is doing.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-14-christian.koenig@amd.com

drm/scheduler: rework entity flush, kill and fini

This was buggy because when we had to wait for entities which were
killed as well we would just deadlock.

Instead move all the dependency handling into the callbacks so that
will all happen asynchronously.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-13-christian.koenig@amd.com

drm/scheduler: remove drm_sched_dependency_optimized

Not used any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-12-christian.koenig@amd.com

drm/amdgpu: use scheduler dependencies for CS

Entirely remove the sync obj in the job.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-11-christian.koenig@amd.com

drm/amdgpu: use scheduler dependencies for UVD msgs

Instead of putting that into the job sync object.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-10-christian.koenig@amd.com

drm/amdgpu: use scheduler dependencies for VM updates

Instead of putting that into the job sync object.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-9-christian.koenig@amd.com

drm/amdgpu: move explicit sync check into the CS

This moves the memory allocation out of the critical code path.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-8-christian.koenig@amd.com

drm/amdgpu: cleanup scheduler job initialization v2

Init the DRM scheduler base class while allocating the job.

This makes the whole handling much more cleaner.

v2: fix coding style

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-7-christian.koenig@amd.com

drm/amdgpu: drop amdgpu_sync from amdgpu_vmid_grab v2

Instead return the fence directly. Avoids memory allocation to store the
fence.

v2: cleanup coding style as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-6-christian.koenig@amd.com

drm/amdgpu: drop the fence argument from amdgpu_vmid_grab

This is always the job anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-5-christian.koenig@amd.com

drm/amdgpu: use drm_sched_job_add_resv_dependencies for moves

Use the new common scheduler functions to figure out what to wait for.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-4-christian.koenig@amd.com

drm/scheduler: add drm_sched_job_add_resv_dependencies

Add a new function to update job dependencies from a resv obj.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-3-christian.koenig@amd.com

drm/ofdrm: Depend on CONFIG_MMU

Add a dependency on CONFIG_MMU to ofdrm. The driver uses GEM SHMEM
helpers, which require MMU support. A reported error message [1] is
shown below.

arm-linux-gnueabi-ld: drivers/gpu/drm/drm_gem_shmem_helper.o: in function `drm_gem_shmem_fault':
>> drivers/gpu/drm/drm_gem_shmem_helper.c:562: undefined reference to `vmf_insert_pfn'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: c8a17756c425 ("drm/ofdrm: Add ofdrm for Open Firmware framebuffers")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/dri-devel/202210192029.ZFeJvqjv-lkp@intel.com/
Link: https://patchwork.freedesktop.org/patch/msgid/20221101104049.15601-1-tzimmermann@suse.de

drm/meson: Fix return type of meson_encoder_cvbs_mode_valid()

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/meson/meson_encoder_cvbs.c:211:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' with an expression of type 'int (struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .mode_valid = meson_encoder_cvbs_mode_valid,
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

->mode_valid() in 'struct drm_bridge_funcs' expects a return type of
'enum drm_mode_status', not 'int'. Adjust the return type of
meson_encoder_cvbs_mode_valid() to match the prototype's to resolve the
warning and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102155242.1927166-1-nathan@kernel.org

drm/i915/hwmon: Fix a build error used with clang compiler

Use REG_FIELD_PREP() and a constant value for hwm_field_scale_and_write()

If the first argument of FIELD_PREP() is not a compile-time constant value
or unsigned long long type, this routine of the __BF_FIELD_CHECK() macro
used internally by the FIELD_PREP() macro always returns false.

BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) >      \
                  __bf_cast_unsigned(_reg, ~0ull),        \
                  _pfx "type of reg too small for mask"); \

And it returns a build error by the option among the clang
compilation options. [-Werror,-Wtautological-constant-out-of-range-compare]

Reported build error while using clang compiler:

drivers/gpu/drm/i915/i915_hwmon.c:115:16: error: result of comparison of
constant 18446744073709551615 with expression of type 'typeof (_Generic((field_msk),
char: (unsigned char)0, unsigned char: (unsigned char)0, signed char: (unsigned char)0,
unsigned short: (unsigned short)0, short: (unsigned short)0, unsigned int:
(unsigned int)0, int: (unsigned int)0, unsigned long: (unsigned long)0, long:
(unsigned long)0, unsigned long long: (unsigned long long)0, long long:
(unsigned long long)0, default: (field_msk)))' (aka 'unsigned int') is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
        bits_to_set = FIELD_PREP(field_msk, nval);
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP'
                __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: ");    \
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK'
                BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) >     \
                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
./include/linux/build_bug.h:39:58: note: expanded from macro 'BUILD_BUG_ON_MSG'
                                    ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
./include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
        _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
        __compiletime_assert(condition, msg, prefix, suffix)
        ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
                if (!(condition))                                       \

v2: Use REG_FIELD_PREP() macro instead of FIELD_PREP() (Jani)

Fixes: 99f55efb7911 ("drm/i915/hwmon: Power PL1 limit and TDP setting")
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
[Joonas: Wrapped commit message error line length to be more reasonable]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221029044230.32128-1-gwan-gyeong.mun@intel.com

drm/i915: Do not set cache_dirty for DGFX

Currently on DG1, which does not have LLC, we hit the below
warning while rebinding an userptr invalidated object.

WARNING: CPU: 4 PID: 13008 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:34 __i915_gem_object_set_pages+0x296/0x2d0 [i915]
...
RIP: 0010:__i915_gem_object_set_pages+0x296/0x2d0 [i915]
...
Call Trace:
<TASK>
i915_gem_userptr_get_pages+0x175/0x1a0 [i915]
____i915_gem_object_get_pages+0x32/0xb0 [i915]
i915_gem_object_userptr_submit_init+0x286/0x470 [i915]
eb_lookup_vmas+0x2ff/0xcf0 [i915]
? __intel_wakeref_get_first+0x55/0xb0 [i915]
i915_gem_do_execbuffer+0x785/0x21d0 [i915]
i915_gem_execbuffer2_ioctl+0xe7/0x3d0 [i915]

We shouldn't be setting the obj->cache_dirty for DGFX,
fix it.

Fixes: d70af57944a1 ("drm/i915/shmem: ensure flush during swap-in on non-LLC")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reported-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102051416.27327-1-niranjana.vishwanathapura@intel.com

drm/tests: Add back seed value information

As reported by Michał, the drm_mm and drm_buddy unit tests lost the
printk with seed value after they were refactored into KUnit.

Add kunit_info with seed value information to assure reproducibility.

Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028221755.340487-1-arthurgrillo@riseup.net

drm/client: Prevent NULL dereference in drm_client_buffer_delete()

The drm_gem_vunmap() will crash with a NULL dereference if the passed
object pointer is NULL. It wasn't a problem before we added the locking
support to drm_gem_vunmap function because the mapping argument was always
NULL together with the object. Make drm_client_buffer_delete() to check
whether GEM is NULL before trying to unmap the GEM, it will happen on
framebuffer creation error.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/dri-devel/Y1kFEGxT8MVlf32V@kili/
Fixes: 79e2cf2e7a19 ("drm/gem: Take reservation lock for vmap/vunmap operations")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221030154412.8320-3-dmitry.osipenko@collabora.com

dma-buf: Make locking consistent in dma_buf_detach()

The dma_buf_detach() locks attach->dmabuf->resv and then unlocks
dmabuf->resv, which could be a two different locks from a static
code checker perspective. In particular this triggers Smatch to
report the "double unlock" error. Make the locking pointers consistent.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/dri-devel/Y1fLfsccW3AS%2Fo+%2F@kili/
Fixes: 809d9c72c2f8 ("dma-buf: Move dma_buf_attach() to dynamic locking specification")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221030154412.8320-2-dmitry.osipenko@collabora.com

drm/ttm: fix undefined behavior in bit shift for TTM_TT_FLAG_PRIV_POPULATED

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in ./include/drm/ttm/ttm_tt.h:122:26
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
ttm_bo_move_memcpy+0x3b4/0x460 [ttm]
bo_driver_move+0x32/0x40 [drm_vram_helper]
ttm_bo_handle_move_mem+0x118/0x200 [ttm]
ttm_bo_validate+0xfa/0x220 [ttm]
drm_gem_vram_pin_locked+0x70/0x1b0 [drm_vram_helper]
drm_gem_vram_pin+0x48/0xb0 [drm_vram_helper]
drm_gem_vram_plane_helper_prepare_fb+0x53/0xe0 [drm_vram_helper]
drm_gem_vram_simple_display_pipe_prepare_fb+0x26/0x30 [drm_vram_helper]
drm_simple_kms_plane_prepare_fb+0x4d/0xe0 [drm_kms_helper]
drm_atomic_helper_prepare_planes+0xda/0x210 [drm_kms_helper]
drm_atomic_helper_commit+0xc3/0x1e0 [drm_kms_helper]
drm_atomic_commit+0x9c/0x160 [drm]
drm_client_modeset_commit_atomic+0x33a/0x380 [drm]
drm_client_modeset_commit_locked+0x77/0x220 [drm]
drm_client_modeset_commit+0x31/0x60 [drm]
__drm_fb_helper_restore_fbdev_mode_unlocked+0xa7/0x170 [drm_kms_helper]
drm_fb_helper_set_par+0x51/0x90 [drm_kms_helper]
fbcon_init+0x316/0x790
visual_init+0x113/0x1d0
do_bind_con_driver+0x2a3/0x5c0
do_take_over_console+0xa9/0x270
do_fbcon_takeover+0xa1/0x170
do_fb_registered+0x2a8/0x340
fbcon_fb_registered+0x47/0xe0
register_framebuffer+0x294/0x4a0
__drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper]
drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper]
drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper]
drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper]
bochs_pci_probe+0x6ca/0x772 [bochs]
local_pci_probe+0x4d/0xb0
pci_device_probe+0x119/0x320
really_probe+0x181/0x550
__driver_probe_device+0xc6/0x220
driver_probe_device+0x32/0x100
__driver_attach+0x195/0x200
bus_for_each_dev+0xbb/0x120
driver_attach+0x27/0x30
bus_add_driver+0x22e/0x2f0
driver_register+0xa9/0x190
__pci_register_driver+0x90/0xa0
bochs_pci_driver_init+0x52/0x1000 [bochs]
do_one_initcall+0x76/0x430
do_init_module+0x61/0x28a
load_module+0x1f82/0x2e50
__do_sys_finit_module+0xf8/0x190
__x64_sys_finit_module+0x23/0x30
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>

Fixes: 3312be8f6fc8 ("drm/ttm: move populated state into page flags")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031113350.4180975-1-cuigaosheng1@huawei.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/i915/selftests: Run the perf MI_BB tests on gen4/5

Now that we know the ring timestamp frequency on gen4/5 we
can run the perf tests that depend on sampling the timestamp.

On g4x/ilk we must read the udw of the 64bit timestamp
register. Details in {g4x,gen5)_read_clock_frequency().

When executing the read via the CS i965 doesn't seem to need
the double read trick that CPU mmio reads need.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-7-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915/selftests: Test RING_TIMESTAMP on gen4/5

Now that we actually know the cs timestamp frequency on gen4/5
let's run the corresponding test.

On g4x/ilk we must read the udw of the 64bit timestamp
register. Details in {g4x,gen5)_read_clock_frequency().

The one extra caveat is that on i965 (or at least CL, don't
recall if I ever tested on BW) we must read the register
twice to get an up to date value. For some unknown reason
the first read tends to return a stale value.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-6-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915/selftests: Run MI_BB perf selftests on SNB

SNB does have the RING_TIMESTAMP register on the RCS engine.
Run the MI_BB perf tests on it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-5-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915: Fix cs timestamp frequency for cl/bw

Despite what the spec says the TIMESTAMP register seems to
tick once every hrawclk (confirmed on i965gm and g35).

v2: Rebase

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-4-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915: Stop claiming cs timestamp frquency on gen2/3

Gen2/3 have no TIMESTAMP registers to sample so no point in thinking
we have any frequency for it either.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-3-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915: Fix cs timestamp frequency for ctg/elk/ilk

On ilk the UDW of TIMESTAMP increments every 1000 ns,
LDW is mbz. In order to represent that we'd need 52 bits,
but we only have 32 bits. Even worse most things want to
only deal with 32 bits of timestamp. So let's just set
up the timestamp frequency as if we only had the UDW.

On ctg/elk 63:20 of TIMESTAMP increments every 1/4 ns, 19:0
are mbz. To make life simpler let's ignore the LDW and set up
timestamp frequency based on the UDW only (increments every
1024 ns).

v2: Rebase

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-2-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure

In case mipi_dsi_attach() fails, call drm_panel_remove() to
avoid memory leak.

Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014231106.468063-1-marex@denx.de

drm/panel/panel-sitronix-st7701: Clean up CMDnBKx selection

There are two command register files, CMD1 and CMD2, where only the CMD2
contains additional register sub-files BK0..3 . Pull the register file
selection call into separate function instead of duplicating it all over
the driver. The CMD2BK2 file is undocumented in datasheet, and is used
for BIST. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014231042.468033-1-marex@denx.de

drm/i915/dg2: Introduce Wa_18017747507

WA 18017747507 applies to all DG2 skus.

BSpec: 56035, 46121, 68173

Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031131509.3411195-1-wayne.boyer@intel.com

drm/panel/panel-sitronix-st7701: Fix RTNI calculation

The RTNI field is multiplied by 16 and incremented by 512 before being
used as the minimum number of pixel clock per horizontal line, hence
it is necessary to subtract those 512 bytes from htotal and then divide
the result by 16 before writing the value into the RTNI field. Fix the
calculation.

Fixes: de2b4917843c ("drm/panel/panel-sitronix-st7701: Infer horizontal pixel count from TFT mode")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221012221159.88397-1-marex@denx.de

drm: lcdif: change burst size to 256B

If a axi bus master with a higher priority do a lot of memory access
FIFO underruns can be inspected. Increase the burst size to 256B to
avoid such underruns and to improve the memory access efficiency.

Fixes: 9db35bb349a0 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101164615.778299-1-m.felsch@pengutronix.de

Merge tag 'drm-intel-next-2022-10-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Hotplug code clean-up and organization (Jani, Gustavo)
- More VBT specific code clean-up, doc, organization,
and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com

drm/vmwgfx: Cleanup the cursor snooping code

Cursor snooping depended on implicit size and format which made debugging
quite difficult. Make the code easier to following by making everything
explicit and instead of using magic numbers predefine all the
parameters the code depends on.

Also fixes incorrectly computed pitches for non-aligned cursor snoops.
Fix which has no practical effect because non-aligned cursor snoops
are not used by the X11 driver and Wayland cursors will go through
mob cursors, instead of surface dma's.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-2-zack@kde.org

drm/vmwgfx: Validate the box size for the snooped cursor

Invalid userspace dma surface copies could potentially overflow
the memcpy from the surface to the snooped image leading to crashes.
To fix it the dimensions of the copybox have to be validated
against the expected size of the snooped cursor.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2ac863719e51 ("vmwgfx: Snoop DMA transfers with non-covering sizes")
Cc: <stable@vger.kernel.org> # v3.2+
Reviewed-by: Michael Banack <banackm@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-1-zack@kde.org

drm/i915/dmabuf: Use scatterlist for_each_sg API

Update open coded for loop to use the standard scatterlist
for_each_sg API.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-4-matthew.auld@intel.com

drm/i915/dmabuf: dmabuf cleanup

Some minor cleanup of some variables for consistency.

Normalize struct sg_table to sgt.
Normalize struct dma_buf_attachment to attach.
checkpatch issues sizeof(), !NULL updates.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-3-matthew.auld@intel.com

drm/i915/selftests: exercise GPU access from the importer

Using PAGE_SIZE here potentially hides issues so bump that to something
larger. This should also make it possible for iommu to coalesce entries
for us. With that in place verify we can write from the GPU using the
importers sg_table, followed by checking that our writes match when read
from the CPU side.

v2: Switch over to igt_gpu_fill_dw(), which looks to be more widely
supported than the migrate stuff (at least OOTB).

References: https://gitlab.freedesktop.org/drm/intel/-/issues/7306
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-2-matthew.auld@intel.com

drm/i915/dmabuf: fix sg_table handling in map_dma_buf

We need to iterate over the original entries here for the sg_table,
pulling out the struct page for each one, to be remapped. However
currently this incorrectly iterates over the final dma mapped entries,
which is likely just one gigantic sg entry if the iommu is enabled,
leading to us only mapping the first struct page (and any physically
contiguous pages following it), even if there is potentially lots more
data to follow.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7306
Fixes: 1286ff739773 ("i915: add dmabuf/prime buffer sharing support.")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: <stable@vger.kernel.org> # v3.5+
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-1-matthew.auld@intel.com

drm/i915/dgfx: Grab wakeref at i915_ttm_unmap_virtual

We had already grabbed the rpm wakeref at obj destruction path,
but it also required to grab the wakeref when object moves.
When i915_gem_object_release_mmap_offset() gets called by
i915_ttm_move_notify(), it will release the mmap offset without
grabbing the wakeref. We want to avoid that therefore,
grab the wakeref at i915_ttm_unmap_virtual() accordingly.

While doing that also changed the lmem_userfault_lock from
mutex to spinlock, as spinlock widely used for list.

Also changed if (obj->userfault_count) to
GEM_BUG_ON(!obj->userfault_count).

v2:
- Removed lmem_userfault_{list,lock} from intel_gt. [Matt Auld]

Fixes: ad74457a6b5a ("drm/i915/dgfx: Release mmap on rpm suspend")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027092242.1476080-3-anshuman.gupta@intel.com

drm/i915: Encapsulate lmem rpm stuff in intel_runtime_pm

Runtime pm is not really per GT, therefore it make sense to
move lmem_userfault_list, lmem_userfault_lock and
userfault_wakeref from intel_gt to intel_runtime_pm structure,
which is embedded to i915.

No functional change.

v2:
- Fixes the code comment nit. [Matt Auld]

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027092242.1476080-2-anshuman.gupta@intel.com

drm/rockchip: lvds: fix PM usage counter unbalance in poweron

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
We fix it by replacing it with the newest pm_runtime_resume_and_get
to keep usage counter balanced.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Fixes: cca1705c3d89 ("drm/rockchip: lvds: Add PX30 support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922132107.105419-3-zhangqilong3@huawei.com

drm/rockchip: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()

Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to avoid
device usage counter leak.

Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615062644.96837-1-yuancan@huawei.com

drm/rockchip: dsi: Remove the unused function dsi_update_bits()

The function dsi_update_bits() is defined in the dw-mipi-dsi-rockchip.c
file, but not called elsewhere, so delete this unused function.

drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:367:20: warning: unused function 'dsi_update_bits'.

https://bugzilla.openanolis.cn/show_bug.cgi?id=2414

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017084330.94117-1-jiapeng.chong@linux.alibaba.com

drm/rockchip: vop2: Register Esmart0-win0 as primary plane

Esmart0-win0 could serve as primary plane, so mark it as such. On
RK3568 this window will never be used as primary plane, because the
three windows at the beginning of the rk3568_vop_win_data[] array
will be used. On RK3566 however, two of the windows at the beginning
of the rk3568_vop_win_data[] array cannot not be used due to hardware
limitations, so without this patch we end up with CRTCs without primary
planes when multiple VPs are active.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926081643.304759-1-s.hauer@pengutronix.de

drm: rockchip: remove rockchip_drm_framebuffer_init() function

The function rockchip_drm_framebuffer_init() was in use
in the rockchip_drm_fbdev.c file, but that is now replaced
by a generic fbdev setup. Reduce the image size by
removing the rockchip_drm_framebuffer_init() and sub function
rockchip_fb_alloc() and cleanup the rockchip_drm_fb.h header file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ebe91504-c5df-99e4-635f-832218584051@gmail.com

drm/i915/mtl: Add missing steering table terminators

The termination entries were missing for a couple of the recently-added
MTL steering tables.

Fixes: f32898c94a10 ("drm/i915/xelpg: Add multicast steering")
Fixes: a7ec65fc7e83 ("drm/i915/xelpmp: Add multicast steering for media GT")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028224022.964997-1-matthew.d.roper@intel.com

drm: bridge: adv7511: use dev_err_probe in probe function

adv7511 probe may need to be attempted multiple times before no
-EPROBE_DEFER is returned. Currently, every such probe results in
an error message:

[ 4.534229] adv7511 1-003d: failed to find dsi host
[ 4.580288] adv7511 1-003d: failed to find dsi host

This is misleading, as there is no error and probe deferral is normal
behavior. Fix this by using dev_err_probe that will suppress
-EPROBE_DEFER errors. While at it, we touch all dev_err in the probe
path. This makes the code more concise and included the error code
everywhere to aid user in debugging.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026125246.3188260-1-a.fatoum@pengutronix.de

drm/i915/sdvo: Fix debug print

Correctly indicate which outputs we support in the debug print.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/sdvo: Reduce copy-pasta in output setup

Avoid having to call the output init function for each
output type separately. We can just call the right one
based on the "class" of the output.

Technically we could just walk the bits of the bitmask
but that could change the order in which we initialize
the outputs. To avoid any behavioural changes keep to
the same explicit probe order as before.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/sdvo: Get rid of the output type<->device index stuff

Get rid of this silly output type<->device index back and
forth and just pass the output type directly to the corresponding
output init function. This was already being done for TV outputs
anyway.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/sdvo: Don't add DDC modes for LVDS

Stop enumerating the DDC modes for SDVO LVDS outputs (outside
the initial fixed mode setup). intel_panel_mode_valid() will
just reject most of them anyway, and any left over are entirely
pointless as they'll match the fixed mode hdisp+vdisp+vrefresh
so no user visible effect from using them instead of the fixed
mode.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/sdvo: Simplify output setup debugs

Get rid of this funny byte based dumping of invalid output
flags and just dump it as a single hex numbers. Also do that
early since all the rest is going to get skipped anyway of
the thing is zero.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/sdvo: Grab mode_config.mutex during LVDS init to avoid WARNs

drm_mode_probed_add() is unhappy about being called w/o
mode_config.mutex. Grab it during LVDS fixed mode setup
to silence the WARNs.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301
Fixes: aa2b88074a56 ("drm/i915/sdvo: Fix multi function encoder stuff")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/sdvo: Setup DDC fully before output init

Call intel_sdvo_select_ddc_bus() before initializing any
of the outputs. And before that is functional (assuming no VBT)
we have to set up the controlled_outputs thing. Otherwise DDC
won't be functional during the output init but LVDS really
needs it for the fixed mode setup.

Note that the whole multi output support still looks very
bogus, and more work will be needed to make it correct.
But for now this should at least fix the LVDS EDID fixed mode
setup.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301
Fixes: aa2b88074a56 ("drm/i915/sdvo: Fix multi function encoder stuff")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/sdvo: Filter out invalid outputs more sensibly

We try to filter out the corresponding xxx1 output
if the xxx0 output is not present. But the way that is
being done is pretty awkward. Make it less so.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/vc4: Make sure we don't end up with a core clock too high

Following the clock rate range improvements to the clock framework,
trying to set a disjoint range on a clock will now result in an error.

Thus, we can't set a minimum rate higher than the maximum reported by
the firmware, or clk_set_min_rate() will fail.

Thus we need to clamp the rate we are about to ask for to the maximum
rate possible on that clock.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-7-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Add more checks for 4k resolutions

At least the 4096x2160@60Hz mode requires some overclocking that isn't
available by default, even if hdmi_enable_4kp60 is enabled.

Let's add some logic to detect whether we can satisfy the core clock
requirements for that mode, and prevent it from being used otherwise.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-6-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Rework hdmi_enable_4kp60 detection code

In order to support higher HDMI frequencies, users have to set the
hdmi_enable_4kp60 parameter in their config.txt file.

This will have the side-effect of raising the maximum of the core clock,
tied to the HVS, and managed by the HVS driver.

However, we are querying this in the HDMI driver by poking into the HVS
structure to get our struct clk handle.

Let's make this part of the HVS bind implementation to have all the core
clock related setup in the same place.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-5-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Fix hdmi_enable_4kp60 detection

In order to support higher HDMI frequencies, users have to set the
hdmi_enable_4kp60 parameter in their config.txt file.

We were detecting this so far by calling clk_round_rate() on the core
clock with the frequency we're supposed to run at when one of those
modes is enabled. Whether or not the parameter was enabled could then be
inferred by the returned rate since the maximum clock rate reported by
the firmware was one of the side effect of setting that parameter.

However, the recent clock rework we did changed what clk_round_rate()
was returning to always return the minimum allowed, and thus this test
wasn't reliable anymore.

Let's use the new clk_get_max_rate() function to reliably determine the
maximum rate allowed on that clock and fix the 4k@60Hz output.

Fixes: e9d6cea2af1c ("clk: bcm: rpi: Run some clocks at the minimum rate allowed")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-4-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

firmware: raspberrypi: Provide a helper to query a clock max rate

The firmware allows to query for its clocks the operating range of a
given clock. We'll need this for some drivers (KMS, in particular) to
infer the state of some configuration options, so let's create a
function to do so.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-3-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

firmware: raspberrypi: Move the clock IDs to the firmware header

We'll need the clock IDs in more drivers than just the clock driver from
now on, so let's move them in the firmware header.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-2-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

firmware: raspberrypi: Introduce rpi_firmware_find_node()

A significant number of RaspberryPi drivers using the firmware don't
have a phandle to it, so end up scanning the device tree to find a node
with the firmware compatible.

That code is duplicated everywhere, so let's introduce a helper instead.

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-1-fe9e7ac8b111@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'drm-misc-next-2022-10-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 6.2:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- connector: Send hotplug event on cleanup
- edid: logging/debug improvements
- plane_helper: Improve tests

Driver Changes:
- bridge:
- it6505: Synchronization improvements
- panel:
- panel-edp: Add INX N116BGE-EA2 C2 and C4 support.
- nouveau: Fix page-fault handling
- vmwgfx: fb and cursor refactoring, convert to generic hashtable

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027073407.c2tlaczvzjrnzazi@houat

drm/i915/perf: Enable OA for DG2

OA was disabled for DG2 as support was missing. Enable it back now.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-17-umesh.nerlige.ramappa@intel.com

drm/i915/perf: complete programming whitelisting for XEHPSDV

We have an additional register to select which slices contribute to
OAG/OAG counter increments.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-16-umesh.nerlige.ramappa@intel.com

drm/i915/guc: Support OA when Wa_16011777198 is enabled

On DG2, a w/a resets RCS/CCS before it goes into RC6. This breaks OA
since OA does not expect engine resets during its use. Fix it by
disabling RC6.

v2: (Ashutosh)
- Bring back slpc_unset_param helper
- Update commit msg
- Use with_intel_runtime_pm helper for set/unset

v3: (Ashutosh)
- Just use intel_uc_uses_guc_rc

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-15-umesh.nerlige.ramappa@intel.com

drm/i915/perf: Save/restore EU flex counters across reset

If a drm client is killed, then hw contexts used by the client are reset
immediately. This reset clears the EU flex counter configuration. If an
OA use case is running in parallel, it would start seeing zeroed eu
counter values following the reset even if the drm client is restarted.
Save/restore the EU flex counter config so that the EU counters can be
monitored continuously across resets.

v2:
- Save/restore eu flex config only for gen12, as for pre-gen12, these
are saved and restored in the context image.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-14-umesh.nerlige.ramappa@intel.com