dt-bindings: rng: apm,x-gene-rng: convert APM RNG to dtschema

Convert the APM X-Gene RNG bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211227183251.132525-1-krzysztof.kozlowski@canonical.com

of: unittest: re-implement overlay tracking

Some overlays are tracked when they are applied.  The tracked overlays
are later removed after the overlay tests are completed.  The old
implementation makes assumptions about the expected values for
overlay changeset id created by the overlay apply which result
in fragile code.  The new code removes the assumptions.

A symptom that exposes a problem with the tracking code is a
warning "UBSAN: shift-out-of-bounds in drivers/of/unittest.c:1933:36",
Kernel Version: 5.15-rc7, PPC-64, Talos II.  This results from variable
"id" value of -1 in the final line of of_unittest_untrack_overlay().

Reported-by: erhard_f@mailbox.org
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220101033329.1277779-3-frowand.list@gmail.com

of: unittest: change references to obsolete overlay id

Unittest inconsistently interchanges overlay changeset id and
overlay id.  Change variable names of overlay id to overlay
changeset id.

Do not fix variable names in the overlay tracking functions
of_unittest_overlay_tracked(), of_unittest_track_overlay(), and
of_unittest_destroy_tracked_overlays() which will be replaced in
a following commit.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220101033329.1277779-2-frowand.list@gmail.com

dt-bindings: display: enable port jdi,lt070me05000

Enable port inside panel bindings.

Fixes warnings generated by `make qcom-apq8064-asus-nexus7-flo.dtb` as:
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml

Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211224195354.78362-1-david@ixit.cz

dt-bindings: vendor-prefixes: add OnePlus

Add vendor prefix for OnePlus (https://www.oneplus.com/)

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211223141002.GA5979@standask-GA-A55M-S2HP

dt-bindings: display: st,stm32-dsi: Fix panel node name in example

With 'unevaluatedProperties' support enabled, the st,stm32-dsi binding
has a new warning:

Documentation/devicetree/bindings/display/st,stm32-dsi.example.dt.yaml: dsi@5a000000: Unevaluated properties are not allowed ('panel-dsi@0' was unexpected)

The documented child node name is 'panel', so update the example.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211221125145.1195234-1-robh@kernel.org

dt-bindings: memory: Document Tegra210 EMC table

Add device tree bindings for the Tegra210 EMC table that is passed via a
reserved-memory device tree node.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217165919.2700920-1-thierry.reding@gmail.com

dt-bindings: crypto: convert Qualcomm PRNG to yaml

Convert Qualcomm PRNG documentation to yaml format.

Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-By: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211220184355.86582-1-david@ixit.cz

dt-bindings: msm: disp: remove bus from dpu bindings

Driver and dts has been already adjusted and bus moved out of dpu, let's
update also dt-bindings.

Fixes warnings as:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: mdss
@ae00000: clock-names: ['iface', 'core'] is too short
        From schema: Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml

Ref: https://lore.kernel.org/all/20210803101657.1072358-1-dmitry.baryshkov@linaro.org/

Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211220184220.86328-1-david@ixit.cz

dt-binding: soc: qcom: convert Qualcomm Command DB documentation to yaml

Convert Qualcomm Command DB documentation into yaml format.

Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211218184617.19923-1-david@ixit.cz

dt-binding: soc: qcom: convert rmtfs documentation to yaml

Convert Qualcomm Remote File System Memory binding to the yaml format.

Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211218182816.17151-1-david@ixit.cz

dt-bindings: arm,cci-400: Drop the PL330 from example

The PL330 was commented out because its binding wasn't converted to a
schema. With the binding converted, the example now needs several updates.
However, while it's possible that the PL330 has a 'cci-control-port', there
aren't any platforms upstream which do. So rather than allowing
'cci-control-port' in the PL330 binding, let's just drop the example.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: arm: ux500: Document missing compatibles

These compatibles are used in Ux500 device trees, but were not documented so
far. Add them to the schema to document them.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211218144927.GA6388@standask-GA-A55M-S2HP

dt-bindings: power: reset: gpio-restart: Convert to json-schema

Convert the GPIO restart bindings from the free-form text format to
json-schema.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217170042.2740058-1-thierry.reding@gmail.com

dt-bindings: i2c: i2c-mux-gpio: Convert to json-schema

Convert the GPIO-based I2C mux bindings from the free-form text format
to json-schema.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217165658.2650677-4-thierry.reding@gmail.com

dt-bindings: i2c: i2c-mux-pinctrl: Convert to json-schema

Convert the pinctrl-based I2C mux bindings from the free-form text
format to json-schema.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217165658.2650677-2-thierry.reding@gmail.com

dt-bindings: i2c: tegra: Convert to json-schema

Convert the Tegra I2C controller bindings from plain text to json-schema
format.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217165658.2650677-1-thierry.reding@gmail.com

dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120

The two bindings are very similar and should be covered by the same
document, do that so we can get rid of an additional binding file.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217160546.497012-3-f.fainelli@gmail.com

dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML

Convert the Broadcom BCM7120 Level 2 interrupt controller Device Tree
binding to YAML to help with validation.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217160546.497012-2-f.fainelli@gmail.com

dt-bindings: usb: Convert BDC to YAML

Convert the Broadcom BDC device controller Device Tree binding to YAML
to help with validation.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217042001.479577-7-f.fainelli@gmail.com

dt-bindings: bus: Convert GISB arbiter to YAML

Convert the Broadcom STB GISB bus arbiter to YAML to help with
validation.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217042001.479577-6-f.fainelli@gmail.com

dt-bindings: ata: Convert Broadcom SATA to YAML

Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML
to help with validation.

Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217042001.479577-5-f.fainelli@gmail.com

of/fdt: Rework early_init_dt_scan_memory() to call directly

Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework
early_init_dt_scan_memory() to be called directly and use libfdt.

Cc: John Crispin <john@phrozen.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-mips@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211215150102.1303588-1-robh@kernel.org

of/fdt: Rework early_init_dt_scan_root() to call directly

Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework early_init_dt_scan_root()
to be called directly and use libfdt.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211118181213.1433346-3-robh@kernel.org

of/fdt: Rework early_init_dt_scan_chosen() to call directly

Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework
early_init_dt_scan_chosen() to be called directly and use libfdt.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211118181213.1433346-2-robh@kernel.org

of: unittest: 64 bit dma address test requires arch support

If an architecture does not support 64 bit dma addresses then testing
for an expected dma address >= 0x100000000 will fail.

Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211212221852.233295-1-frowand.list@gmail.com

of: unittest: fix warning on PowerPC frame size warning

The struct device variable "dev_bogus" was triggering this warning
on a PowerPC build:

    drivers/of/unittest.c: In function 'of_unittest_dma_ranges_one.constprop':
    [...] >> The frame size of 1424 bytes is larger than 1024 bytes
             [-Wframe-larger-than=]

This variable is now dynamically allocated.

Fixes: e0d072782c734 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211210184636.7273-2-jim2101024@gmail.com

dt-bindings: input: pwm-vibrator: Convert txt bindings to yaml

Converts txt binding to new YAML format and simplify example.

Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211208183434.98087-1-david@ixit.cz

dt-bindings: PCI: designware: Fix 'unevaluatedProperties' warnings

With 'unevaluatedProperties' support implemented, there's a number of
warnings from the Designware PCIe based bindings:

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dt.yaml: pcie@1ffc000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'device_type', 'bus-range', 'ranges', '#interrupt-cells', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dt.yaml: pcie@1ffc000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f4000000: Unevaluated properties are not allowed ('bus-range', '#address-cells', '#size-cells', 'device_type', 'ranges', 'num-lanes', '#interrupt-cells', 'interrupts', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'clocks', 'clock-names' were unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f4000000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f5000000: Unevaluated properties are not allowed ('bus-range', '#address-cells', '#size-cells', 'device_type', 'phys', 'ranges', 'num-lanes', '#interrupt-cells', 'interrupts', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'reset-gpios', 'pcie@0,0' were unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f5000000: Unevaluated properties are not allowed ('phys', 'hisilicon,clken-gpios' were unexpected)
Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml: pcie@d0e00000: Unevaluated properties are not allowed ('device_type', '#address-cells', '#size-cells', 'linux,pci-domain', 'bus-range', '#interrupt-cells', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml: pcie@d0e00000: Unevaluated properties are not allowed ('resets', 'phys', 'phy-names', 'reset-assert-ms' were unexpected)
Documentation/devicetree/bindings/pci/rockchip-dw-pcie.example.dt.yaml: pcie@fe280000: Unevaluated properties are not allowed ('clock-names', 'msi-map', 'phys', 'phy-names', 'power-domains', 'resets', 'reset-names' were unexpected)
Documentation/devicetree/bindings/pci/samsung,exynos-pcie.example.dt.yaml: pcie@15700000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', '#interrupt-cells', 'device_type', 'bus-range', 'ranges', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/samsung,exynos-pcie.example.dt.yaml: pcie@15700000: Unevaluated properties are not allowed ('clock-names', 'phys', 'vdd10-supply', 'vdd18-supply' were unexpected)
Documentation/devicetree/bindings/pci/sifive,fu740-pcie.example.dt.yaml: pcie@e00000000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', '#interrupt-cells', 'device_type', 'dma-coherent', 'bus-range', 'ranges', 'interrupts', 'interrupt-parent', 'interrupt-map-mask', 'interrupt-map', 'clock-names', 'clocks' were unexpected)
Documentation/devicetree/bindings/pci/sifive,fu740-pcie.example.dt.yaml: pcie@e00000000: Unevaluated properties are not allowed ('dma-coherent', 'clock-names', 'resets', 'pwren-gpios' were unexpected)
Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.example.dt.yaml: pcie-ep@66000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'reset-names', 'resets', 'phy-names', 'phys' were unexpected)
Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.example.dt.yaml: pcie@28400000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.example.dt.yaml: pcie@28400000: Unevaluated properties are not allowed ('device_type', 'bus-range', 'num-viewport', '#address-cells', '#size-cells', '#interrupt-cells', 'ranges', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'max-link-speed' were unexpected)

The main problem is that snps,dw-pcie.yaml and snps,dw-pcie-ep.yaml
shouldn't set 'unevaluatedProperties: false'. Otherwise, bindings that
reference them cannot add additional properties. With that addressed,
there's a handful of other undocumented properties to add.

Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206194426.2470080-1-robh@kernel.org

dt-bindings: PCI: cdns-ep: Fix 'unevaluatedProperties' warnings

With 'unevaluatedProperties' support implemented, the TI j721e endpoint
binding example has a warning:

Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.example.dt.yaml: pcie-ep@d000000: Unevaluated properties are not allowed ('max-link-speed', 'num-lanes', 'max-functions' were unexpected)

Adjust where pci-ep.yaml is referenced so that ti,j721e-pci-ep.yaml will
include it.

Cc: Tom Joseph <tjoseph@cadence.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206194413.2469643-1-robh@kernel.org

dt-bindings: PCI: Fix 'unevaluatedProperties' warnings

With 'unevaluatedProperties' support implemented, there's several
warnings due to undocumented properties:

Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@0,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@1,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@2,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dt.yaml: pcie@11230000: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/microchip,pcie-host.example.dt.yaml: pcie@2030000000: Unevaluated properties are not allowed ('interrupt-controller' was unexpected)
Documentation/devicetree/bindings/pci/ti,am65-pci-ep.example.dt.yaml: pcie-ep@5500000: Unevaluated properties are not allowed ('num-ib-windows', 'num-ob-windows' were unexpected)
Documentation/devicetree/bindings/pci/ti,am65-pci-host.example.dt.yaml: pcie@5500000: Unevaluated properties are not allowed ('num-viewport', 'interrupts' were unexpected)
Documentation/devicetree/bindings/pci/ti,j721e-pci-host.example.dt.yaml: pcie@2900000: Unevaluated properties are not allowed ('dma-coherent' was unexpected)

Add the necessary property definitions or remove the properties from the
examples to fix these warnings.

Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Jianjun Wang <jianjun.wang@mediatek.com>
Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Daire McNamara <daire.mcnamara@microchip.com>
Cc: Abraham I <kishon@ti.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20211206194406.2469361-1-robh@kernel.org

dt-bindings: memory-controllers: ti,gpmc: Drop incorrect unevaluatedProperties

With 'unevaluatedProperties' support implemented, the TI GPMC example
has a warning:

Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.example.dt.yaml: memory-controller@6e000000: onenand@0,0: Unevaluated properties are not allowed ('compatible', '#address-cells', '#size-cells', 'partition@0', 'partition@100000' were unexpected)

The child node definition for GPMC is not a complete binding, so specifying
'unevaluatedProperties: false' for it is not correct and should be
dropped.

Fixup the unnecessary 'allOf' while we're here.

Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211206174215.2297796-1-robh@kernel.org

dt-bindings: usb: Add missing properties used in examples

With 'unevaluatedProperties' support implemented, the following warnings
are generated in the usb examples:

Documentation/devicetree/bindings/usb/intel,keembay-dwc3.example.dt.yaml: usb: usb@34000000: Unevaluated properties are not allowed ('reg' was unexpected)
Documentation/devicetree/bindings/usb/snps,dwc3.example.dt.yaml: usb@4a030000: Unevaluated properties are not allowed ('reg' was unexpected)

Add the missing property definitions.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206174113.2295616-1-robh@kernel.org

dt-bindings: watchdog: atmel: Add missing 'interrupts' property

With 'unevaluatedProperties' support implemented, the atmel,sama5d4-wdt
example has the following warning:

/home/rob/proj/git/linux-dt/.build-arm64/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.example.dt.yaml: watchdog@fc068640: Unevaluated properties are not allowed ('interrupts' was unexpected)

Document the missing 'interrupts' property.

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211206174045.2294873-1-robh@kernel.org

dt-bindings: watchdog: ti,rti-wdt: Fix assigned-clock-parents

With 'unevaluatedProperties' support implemented, the ti,rti-wdt example
has the following warning:

/home/rob/proj/git/linux-dt/.build-arm64/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.example.dt.yaml: watchdog@2200000: Unevaluated properties are not allowed ('assigned-clock-parents' was unexpected)

The problem is the schema has a typo in 'assigned-clocks-parents'. As
it is not required to list assigned clocks in bindings, just drop the
property definitions to fix this.

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211206174028.2294330-1-robh@kernel.org

dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells'

'#interrupt-cells' is not documented which causes a warning when
'unevaluatedProperties' is implemented. Unless the I2C controller is
also an interrupt controller, '#interrupt-cells' is not valid. This
doesn't appear to be the case from the driver, so just remove it from
the example.

Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Rayn Chen <rayn_chen@aspeedtech.com>
Cc: linux-i2c@vger.kernel.org
Cc: openbmc@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206174237.2298580-1-robh@kernel.org

dt-bindings: perf: Add compatible for Arm DSU-110

DSU-110 is the newest and shiniest for Armv9. Its programmer's model is
largely identical to the previous generation of DSUs, so we can treat it
as compatible, but it does have a a handful of extra IMP-DEF PMU events
to call its own. Thanks to the new notion of core complexes, the maximum
number of supported CPUs goes up as well.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/51a8060493e1220886dcd468fad9a2b603607297.1639490264.git.robin.murphy@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: perf: Convert Arm DSU to schema

Convert the DSU binding to schema, as one does.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/9fde2e11b0d11285c26d0e9d261034a1628c7901.1639490264.git.robin.murphy@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: gpu: mali-bifrost: Document RZ/G2L support

The Renesas RZ/G2{L, LC} SoC (a.k.a R9A07G044) has a Bifrost Mali-G31 GPU,
add a compatible string for it.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20211208104026.421-2-biju.das.jz@bp.renesas.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: thermal: Convert Broadcom TMON to YAML

Convert the Broadcom AVS TMON Device Tree binding to YAML to help with
validation.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208003727.3596577-12-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: rng: Convert iProc RNG200 to YAML

Convert the Broadcom iProc RNG200 HWRNG Device Tree binding to YAML to
help with validation.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208003727.3596577-11-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML

Convert the Broadcom STB L2 generic Level 2 interrupt controller Device
Tree binding to YAML to help with validation.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208003727.3596577-10-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML

Convert the Broadcom STB BCM7038 Level 1 interrupt controller Device
Tree binding to YAML to help with validation.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208003727.3596577-7-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: gpio: Convert Broadcom STB GPIO to YAML

Convert the Broadcom STB GPIO Device Tree binding to YAML to help with
validation.

Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211208003727.3596577-6-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: rtc: Convert Broadcom STB waketimer to YAML

Convert the Broadcom STB waketimer Device Tree binding to YAML to help
with validation.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208003727.3596577-5-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: pwm: Convert BCM7038 PWM binding to YAML

Convert the Broadcom STB BCM7038 PWM Device Tree binding to YAML to help
with validation.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208003727.3596577-4-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: reset: Convert Broadcom STB reset to YAML

Convert the Broadcom STB SW_INIT style reset controller binding to YAML.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20211208003727.3596577-3-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: pci: Convert iProc PCIe to YAML

Conver the iProc PCIe controller Device Tree binding to YAML now that
all DTS in arch/arm and arch/arm64 have been fixed to be compliant.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211214035820.2984289-7-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: phy: Convert Cygnus PCIe PHY to YAML

Convert the Broadcom Cygnus PCIe PHY Device Tree binding t YAML to help
with validation.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211214035820.2984289-6-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: i2c: tegra-bpmp: Convert to json-schema

Convert the NVIDIA Tegra186 (and later) BPMP I2C bindings from the
free-form text format to json-schema.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211208143306.534700-1-thierry.reding@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: arm: pmu: Document Denver and Carmel PMUs

Add compatible strings for the NVIDIA Denver and Carmel PMUs.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211207150746.444478-1-thierry.reding@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: arm: Catch up with Cortex/Neoverse CPUs again

Add bindings for the 2020 and 2021 cohorts of Cortex-A and Neoverse
CPUs, now featuring their Cortex-X cousins as well.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/a36014d06d308c73d3fa1ed55e8967fb8adadf0d.1638900542.git.robin.murphy@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: Convert SYSTEMPORT to YAML

Convert the Broadcom SYSTEMPORT Ethernet controller Device Tree binding
to YAML.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208202801.3706929-3-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: Convert AMAC to YAML

Convert the Broadcom AMAC Device Tree binding to YAML to help with
schema and dtbs checking.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208202801.3706929-2-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: Convert iProc MDIO mux to YAML

Conver the Broadcom iProc MDIO mux Device Tree binding to YAML.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-9-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: phy: Convert Northstar 2 PCIe PHY to YAML

Convert the Broadcom Northstar 2 PCIe PHY Device Tree binding to YAML
and rename it accordingly in the process since it had nothing to do with
a MDIO mux on the PCI(e) bus. This is a pre-requisite to updating
another binding file to YAML.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-8-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: Convert GENET binding to YAML

Convert the GENET binding to YAML, leveraging brcm,unimac-mdio.yaml and
the standard ethernet-controller.yaml files.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-5-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: Document moca PHY interface

MoCA (Multimedia over Coaxial) is used by the internal GENET/MOCA cores
and will be needed in order to convert GENET to YAML in subsequent
changes.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-4-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: brcm,unimac-mdio: Update maintainers for binding

Add Doug and myself as maintainers since this binding is used by the
GENET Ethernet controller for its internal MDIO controller.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-3-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: brcm,unimac-mdio: reg-names is optional

The UniMAC MDIO controller integrated into GENET does not provide a
reg-names property since it is optional, reflect that in the binding.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-2-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: PCI: brcmstb: compatible is required

The compatible property is required, make sure the binding documents it
as such.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211202223609.1171452-1-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Use correct vendor prefix for Asahi Kasei Corp.

The old "ak" vendor prefix that was never officially accepted was still
being used in some examples. Convert to the correct vendor prefix (i.e.
"asahi-kasei").

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206144802.217073-1-thierry.reding@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Only show unique unit address warning for enabled nodes

There are valid cases when two nodes can have the same address. For
example, in Exynos SoCs there is USI IP-core, which might be configured
to provide UART, SPI or I2C block, all of which having the same base
register address. But only one can be enabled at a time. That looks like
this:

    usi@138200c0 {
        serial@13820000 {
            status = "okay";
        };

        i2c@13820000 {
            status = "disabled";
        };
    };

When running "make dt_binding_check", it reports next warning:

    Warning (unique_unit_address):
    /example-0/usi@138200c0/serial@13820000:
    duplicate unit-address (also used in node
    /example-0/usi@138200c0/i2c@13820000)

Disable "unique_unit_address" in DTC_FLAGS to suppress warnings like
that, but enable "unique_unit_address_if_enabled" warning, so that dtc
still reports a warning when two enabled nodes are having the same
address.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211203183517.11390-1-semen.protsenko@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: cdns,macb: Convert to json-schema

Convert the Cadence MACB/GEM Ethernet controller Device Tree binding
documentation to json-schema.

Re-add "cdns,gem" (removed in commit a217d8711da5c87f ("dt-bindings:
Remove PicoXcell bindings")) as there are active users on non-PicoXcell
platforms.
Add missing "ether_clk" clock.
Add missing properties.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/104dcbfd22f95fc77de9fe15e8abd83869603ea5.1637927673.git.geert@linux-m68k.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: dma: sifive,fu540-c000-pdma: Group interrupt tuples

To improve human readability and enable automatic validation, the tuples
in "interrupts" properties should be grouped using angle brackets.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211125150233.161576-1-geert@linux-m68k.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: ethernet-controller: add 2.5G and 10G speeds

Both are already used by HW and drivers inside Linux.

Fix warnings as:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dt.yaml: ethernet@0,2: fixed-link:speed:0:0: 2500 is not one of [10, 100, 1000]
        From schema: Documentation/devicetree/bindings/net/ethernet-controller.yaml

Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211124202046.81136-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>

of: base: Skip CPU nodes with "fail"/"fail-..." status

Allow fully disabling CPU nodes using status = "fail".

This allows a bootloader to change the number of available CPUs (for
example when a common DTS is used for SoC variants with different numbers
of cores) without deleting the nodes altogether, which could require
additional fixups to avoid dangling phandle references.

Unknown status values (everything that is not "okay"/"ok", "disabled" or
"fail"/"fail-...") will continue to be interpreted like "disabled",
meaning that the CPU can be enabled during boot.

References:
- https://www.spinics.net/lists/devicetree-spec/msg01007.html
- https://github.com/devicetree-org/dt-schema/pull/61

Link: https://lore.kernel.org/all/CAL_Jsq+1LsTBdVaODVfmB0eme2jMpNL4VgKk-OM7rQWyyF0Jbw@mail.gmail.com/
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211122114536.2981-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>

Update trivial-devices.yaml with Sensirion,sht4x

Add Sensirion SHT4x, a precision temperature and humidity sensor, to
trivial-devices.yaml.

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Link: https://lore.kernel.org/r/20211121161320.2312393-1-davidm@egauge.net
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Add resets to the PL011 bindings

Some PL011 implementations provide a reset line to the silicon
IP block, add a device tree property for this.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211120011418.2630449-1-linus.walleij@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: hwmon: add TI DC-DC converters

Few Texas Instruments DC-DC converters on PMBus like TPS544B20 do not
have bindings and are used only as hardware monitoring sensor.  These
devices are actually not trivial and can receive basic configuration
(e.g. power up mode, CNTL pin polarity, expected input voltage), however
devicetree support for configuration was never added.

Therefore in current state the devices are used only in read-only mode
and have trivial bindings, so document them to have basic dtschema
tests.

Cc: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116110207.68494-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: leds: convert BCM6328 controller to the json-schema

This helps validating DTS files.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20211114225416.3174-1-zajec5@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: arm: cpus: Add ARM Cortex-A78

The ARM Cortex-A78 CPU can be found in a number of recent SoCs such as
the NVIDIA Tegra234 (Orin).

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Robin Murphy <robin.muephy@arm.com>
Link: https://lore.kernel.org/r/20211112131904.3683428-1-thierry.reding@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: thermal: Fix definition of cooling-maps contribution property

When converting the thermal-zones bindings to yaml the definition of the
contribution property changed. The intention is the same, an integer
value expressing a ratio of a sum on how much cooling is provided by the
device to the zone. But after the conversion the integer value is
limited to the range 0 to 100 and expressed as a percentage.

This is problematic for two reasons.

- This do not match how the binding is used. Out of the 18 files that
  make use of the property only two (ste-dbx5x0.dtsi and
  ste-hrefv60plus.dtsi) sets it at a value that satisfy the binding,
  100. The remaining 16 files set the value higher and fail to validate.

- Expressing the value as a percentage instead of a ratio of the sum is
  confusing as there is nothing to enforce the sum in the zone is not
  greater then 100.

This patch restore the pre yaml conversion description and removes the
value limitation allowing the usage of the bindings to validate.

Fixes: 1202a442a31fd2e5 ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211109103045.1403686-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: display: sync formats with simplefb.h

Sync all formats from simplefb.h into documentation.

Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211108183322.68192-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>

of: property: fw_devlink: Fixup behaviour when 'node_not_dev' is set

In the struct supplier_bindings the member 'node_not_dev' is described as
"The consumer node containing the property is never a device.", but that is
inconsistent with the behaviour of the code in of_link_property(), as it
calls of_get_compat_node() that starts parsing for a compatible property
from the node it gets passed to it. The proper behaviour is to start at the
node's parent, so let's do that.

While at it, let's take the opportunity to update the description of the
'node_not_dev' flag, as to clarify its purpose.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210902090221.820254-1-ulf.hansson@linaro.org

dt-bindings: vendor-prefixes: add T-Head Semiconductor

Add vendor prefix for T-Head Semiconductor [1] [2]

[1] https://github.com/T-head-Semi
[2] https://www.t-head.cn/

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree <devicetree@vger.kernel.org>
Link: https://lore.kernel.org/r/20211103020921.3870764-1-guoren@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Linux 5.16-rc1

kconfig: Add support for -Wimplicit-fallthrough

Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.

The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.

Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.

This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)

Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8
Link: https://bugs.llvm.org/show_bug.cgi?id=51094
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'xfs-5.16-merge-5' of git://git./fs/xfs/xfs-linux

Pull xfs cleanups from Darrick Wong:
 "The most 'exciting' aspect of this branch is that the xfsprogs
  maintainer and I have worked through the last of the code
  discrepancies between kernel and userspace libxfs such that there are
  no code differences between the two except for #includes.

  IOWs, diff suffices to demonstrate that the userspace tools behave the
  same as the kernel, and kernel-only bits are clearly marked in the
  /kernel/ source code instead of just the userspace source.

  Summary:

   - Clean up open-coded swap() calls.

   - A little bit of #ifdef golf to complete the reunification of the
     kernel and userspace libxfs source code"

* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: sync xfs_btree_split macros with userspace libxfs
  xfs: #ifdef out perag code for userspace
  xfs: use swap() to make dabtree code cleaner

Merge tag 'for-5.16/parisc-3' of git://git./linux/kernel/git/deller/parisc-linux

Pull more parisc fixes from Helge Deller:
 "Fix a build error in stracktrace.c, fix resolving of addresses to
  function names in backtraces, fix single-stepping in assembly code and
  flush userspace pte's when using set_pte_at()"

* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/entry: fix trace test in syscall exit path
  parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
  parisc: Fix implicit declaration of function '__kernel_text_address'
  parisc: Fix backtrace to always include init funtion names

Merge tag 'sh-for-5.16' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker.

* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
  sh: pgtable-3level: Fix cast to pointer from integer of different size
  sh: fix READ/WRITE redefinition warnings
  sh: define __BIG_ENDIAN for math-emu
  sh: math-emu: drop unused functions
  sh: fix kconfig unmet dependency warning for FRAME_POINTER
  sh: Cleanup about SPARSE_IRQ
  sh: kdump: add some attribute to function
  maple: fix wrong return value of maple_bus_init().
  sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
  sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
  sh: boards: Fix the cacography in irq.c
  sh: check return code of request_irq
  sh: fix trivial misannotations

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - Fix early_iounmap

 - Drop cc-option fallbacks for architecture selection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9156/1: drop cc-option fallbacks for architecture selection
  ARM: 9155/1: fix early early_iounmap()

Merge tag 'devicetree-fixes-for-5.16-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Two fixes due to DT node name changes on Arm, Ltd. boards

 - Treewide rename of Ingenic CGU headers

 - Update ST email addresses

 - Remove Netlogic DT bindings

 - Dropping few more cases of redundant 'maxItems' in schemas

 - Convert toshiba,tc358767 bridge binding to schema

* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: watchdog: sunxi: fix error in schema
  bindings: media: venus: Drop redundant maxItems for power-domain-names
  dt-bindings: Remove Netlogic bindings
  clk: versatile: clk-icst: Ensure clock names are unique
  of: Support using 'mask' in making device bus id
  dt-bindings: treewide: Update @st.com email address to @foss.st.com
  dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
  dt-bindings: media: Update maintainers for st,stm32-cec.yaml
  dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
  dt-bindings: timer: Update maintainers for st,stm32-timer
  dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
  dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
  dt-bindings: Rename Ingenic CGU headers to ingenic,*.h

Merge tag 'timers-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
 "A single fix for POSIX CPU timers to address a problem where POSIX CPU
  timer delivery stops working for a new child task because
  copy_process() copies state information which is only valid for the
  parent task"

* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()

Merge tag 'irq-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem

  Core code:

   - A regression fix for the Open Firmware interrupt mapping code where
     a interrupt controller property in a node caused a map property in
     the same node to be ignored.

  Interrupt chip drivers:

   - Workaround a limitation in SiFive PLIC interrupt chip which
     silently ignores an EOI when the interrupt line is masked.

   - Provide the missing mask/unmask implementation for the CSKY MP
     interrupt controller.

  PCI/MSI:

   - Prevent a use after free when PCI/MSI interrupts are released by
     destroying the sysfs entries before freeing the memory which is
     accessed in the sysfs show() function.

   - Implement a mask quirk for the Nvidia ION AHCI chip which does not
     advertise masking capability despite implementing it. Even worse
     the chip comes out of reset with all MSI entries masked, which due
     to the missing masking capability never get unmasked.

   - Move the check which prevents accessing the MSI[X] masking for XEN
     back into the low level accessors. The recent consolidation missed
     that these accessors can be invoked from places which do not have
     that check which broke XEN. Move them back to he original place
     instead of sprinkling tons of these checks all over the code"

* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  of/irq: Don't ignore interrupt-controller when interrupt-map failed
  irqchip/sifive-plic: Fixup EOI failed when masked
  irqchip/csky-mpintc: Fixup mask/unmask implementation
  PCI/MSI: Destroy sysfs before freeing entries
  PCI: Add MSI masking quirk for Nvidia ION AHCI
  PCI/MSI: Deal with devices lying about their MSI mask capability
  PCI/MSI: Move non-mask check back into low level accessors

Merge tag 'locking-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip

Pull x86 static call update from Thomas Gleixner:
 "A single fix for static calls to make the trampoline patching more
  robust by placing explicit signature bytes after the call trampoline
  to prevent patching random other jumps like the CFI jump table
  entries"

* tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  static_call,x86: Robustify trampoline patching

Merge tag 'sched_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

 - Avoid touching ~100 config files in order to be able to select the
   preemption model

 - clear cluster CPU masks too, on the CPU unplug path

 - prevent use-after-free in cfs

 - Prevent a race condition when updating CPU cache domains

 - Factor out common shared part of smp_prepare_cpus() into a common
   helper which can be called by both baremetal and Xen, in order to fix
   a booting of Xen PV guests

* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  preempt: Restore preemption model selection configs
  arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
  sched/fair: Prevent dead task groups from regaining cfs_rq's
  sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
  x86/smp: Factor out parts of native_smp_prepare_cpus()

Merge tag 'perf_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

 - Prevent unintentional page sharing by checking whether a page
   reference to a PMU samples page has been acquired properly before
   that

 - Make sure the LBR_SELECT MSR is saved/restored too

 - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any
   residual data left

* tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Avoid put_page() when GUP fails
  perf/x86/vlbr: Add c->flags to vlbr event constraints
  perf/x86/lbr: Reset LBR_SELECT during vlbr reset

Merge tag 'x86_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Add the model number of a new, Raptor Lake CPU, to intel-family.h

 - Do not log spurious corrected MCEs on SKL too, due to an erratum

 - Clarify the path of paravirt ops patches upstream

 - Add an optimization to avoid writing out AMX components to sigframes
   when former are in init state

* tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add Raptor Lake to Intel family
  x86/mce: Add errata workaround for Skylake SKX37
  MAINTAINERS: Add some information to PARAVIRT_OPS entry
  x86/fpu: Optimize out sigframe xfeatures when in init state

Merge tag 'perf-tools-for-v5.16-2021-11-13' of git://git./linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:
 "Hardware tracing:

   - ARM:
      * Print the size of the buffer size consistently in hexadecimal in
        ARM Coresight.
      * Add Coresight snapshot mode support.
      * Update --switch-events docs in 'perf record'.
      * Support hardware-based PID tracing.
      * Track task context switch for cpu-mode events.

   - Vendor events:
      * Add metric events JSON file for power10 platform

  perf test:

   - Get 'perf test' unit tests closer to kunit.

   - Topology tests improvements.

   - Remove bashisms from some tests.

  perf bench:

   - Fix memory leak of perf_cpu_map__new() in the futex benchmarks.

  libbpf:

   - Add some more weak libbpf functions o allow building with the
     libbpf versions, old ones, present in distros.

  libbeauty:

   - Translate [gs]setsockopt 'level' argument integer values to
     strings.

  tools headers UAPI:

   - Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files
     with the kernel sources.

  Documentation:

   - Add documentation to 'struct symbol'.

   - Synchronize the definition of enum perf_hw_id with code in
     tools/perf/design.txt"

* tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
  perf tests: Remove bash constructs from stat_all_pmu.sh
  perf tests: Remove bash construct from record+zstd_comp_decomp.sh
  perf test: Remove bash construct from stat_bpf_counters.sh test
  perf bench futex: Fix memory leak of perf_cpu_map__new()
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync sound/asound.h with the kernel sources
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools headers UAPI: Sync arch prctl headers with the kernel sources
  perf tools: Add more weak libbpf functions
  perf bpf: Avoid memory leak from perf_env__insert_btf()
  perf symbols: Factor out annotation init/exit
  perf symbols: Bit pack to save a byte
  perf symbols: Add documentation to 'struct symbol'
  tools headers UAPI: Sync files changed by new futex_waitv syscall
  perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning
  perf arm-spe: Support hardware-based PID tracing
  perf arm-spe: Save context ID in record
  perf arm-spe: Update --switch-events docs in 'perf record'
  perf arm-spe: Track task context switch for cpu-mode events
  ...

Merge tag 'irqchip-fixes-5.16-1' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

  - Address an issue with the SiFive PLIC being unable to EOI
    a masked interrupt

  - Move the disable/enable methods in the CSky mpintc to
    mask/unmask

  - Fix a regression in the OF irq code where an interrupt-controller
    property in the same node as an interrupt-map property would get
    ignored

Link: https://lore.kernel.org/all/20211112173459.4015233-1-maz@kernel.org

Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux

Pull zstd update from Nick Terrell:
 "Update to zstd-1.4.10.

  Add myself as the maintainer of zstd and update the zstd version in
  the kernel, which is now 4 years out of date, to a much more recent
  zstd release. This includes bug fixes, much more extensive fuzzing,
  and performance improvements. And generates the kernel zstd
  automatically from upstream zstd, so it is easier to keep the zstd
  verison up to date, and we don't fall so far out of date again.

  This includes 5 commits that update the zstd library version:

   - Adds a new kernel-style wrapper around zstd.

     This wrapper API is functionally equivalent to the subset of the
     current zstd API that is currently used. The wrapper API changes to
     be kernel style so that the symbols don't collide with zstd's
     symbols. The update to zstd-1.4.10 maintains the same API and
     preserves the semantics, so that none of the callers need to be
     updated. All callers are updated in the commit, because there are
     zero functional changes.

   - Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
     depend on the layout of `lib/zstd/` to include every source file.
     This allows the next patch to be automatically generated.

   - Imports the zstd-1.4.10 source code. This commit is automatically
     generated from upstream zstd (https://github.com/facebook/zstd).

   - Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.

   - Fixes a newly added build warning for clang.

  The discussion around this patchset has been pretty long, so I've
  included a FAQ-style summary of the history of the patchset, and why
  we are taking this approach.

  Why do we need to update?
  -------------------------

  The zstd version in the kernel is based off of zstd-1.3.1, which is
  was released August 20, 2017. Since then zstd has seen many bug fixes
  and performance improvements. And, importantly, upstream zstd is
  continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
  older versions. So the only way to sanely get these fixes is to keep
  up to date with upstream zstd.

  There are no known security issues that affect the kernel, but we need
  to be able to update in case there are. And while there are no known
  security issues, there are relevant bug fixes. For example the problem
  with large kernel decompression has been fixed upstream for over 2
  years [1]

  Additionally the performance improvements for kernel use cases are
  significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:

   - BtrFS zstd compression at levels 1 and 3 is 5% faster

   - BtrFS zstd decompression+read is 15% faster

   - SquashFS zstd decompression+read is 15% faster

   - F2FS zstd compression+write at level 3 is 8% faster

   - F2FS zstd decompression+read is 20% faster

   - ZRAM decompression+read is 30% faster

   - Kernel zstd decompression is 35% faster

   - Initramfs zstd decompression+build is 5% faster

  On top of this, there are significant performance improvements coming
  down the line in the next zstd release, and the new automated update
  patch generation will allow us to pull them easily.

  How is the update patch generated?
  ----------------------------------

  The first two patches are preparation for updating the zstd version.
  Then the 3rd patch in the series imports upstream zstd into the
  kernel. This patch is automatically generated from upstream. A script
  makes the necessary changes and imports it into the kernel. The
  changes are:

   - Replace all libc dependencies with kernel replacements and rewrite
     includes.

   - Remove unncessary portability macros like: #if defined(_MSC_VER).

   - Use the kernel xxhash instead of bundling it.

  This automation gets tested every commit by upstream's continuous
  integration. When we cut a new zstd release, we will submit a patch to
  the kernel to update the zstd version in the kernel.

  The automated process makes it easy to keep the kernel version of zstd
  up to date. The current zstd in the kernel shares the guts of the
  code, but has a lot of API and minor changes to work in the kernel.
  This is because at the time upstream zstd was not ready to be used in
  the kernel envrionment as-is. But, since then upstream zstd has
  evolved to support being used in the kernel as-is.

  Why are we updating in one big patch?
  -------------------------------------

  The 3rd patch in the series is very large. This is because it is
  restructuring the code, so it both deletes the existing zstd, and
  re-adds the new structure. Future updates will be directly
  proportional to the changes in upstream zstd since the last import.
  They will admittidly be large, as zstd is an actively developed
  project, and has hundreds of commits between every release. However,
  there is no other great alternative.

  One option ruled out is to replay every upstream zstd commit. This is
  not feasible for several reasons:

   - There are over 3500 upstream commits since the zstd version in the
     kernel.

   - The automation to automatically generate the kernel update was only
     added recently, so older commits cannot easily be imported.

   - Not every upstream zstd commit builds.

   - Only zstd releases are "supported", and individual commits may have
     bugs that were fixed before a release.

  Another option to reduce the patch size would be to first reorganize
  to the new file structure, and then apply the patch. However, the
  current kernel zstd is formatted with clang-format to be more
  "kernel-like". But, the new method imports zstd as-is, without
  additional formatting, to allow for closer correlation with upstream,
  and easier debugging. So the patch wouldn't be any smaller.

  It also doesn't make sense to import upstream zstd commit by commit
  going forward. Upstream zstd doesn't support production use cases
  running of the development branch. We have a lot of post-commit
  fuzzing that catches many bugs, so indiviudal commits may be buggy,
  but fixed before a release. So going forward, I intend to import every
  (important) zstd release into the Kernel.

  So, while it isn't ideal, updating in one big patch is the only patch
  I see forward.

  Who is responsible for this code?
  ---------------------------------

  I am. This patchset adds me as the maintainer for zstd. Previously,
  there was no tree for zstd patches. Because of that, there were
  several patches that either got ignored, or took a long time to merge,
  since it wasn't clear which tree should pick them up. I'm officially
  stepping up as maintainer, and setting up my tree as the path through
  which zstd patches get merged. I'll make sure that patches to the
  kernel zstd get ported upstream, so they aren't erased when the next
  version update happens.

  How is this code tested?
  ------------------------

  I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
  Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
  aarch64. I checked both performance and correctness.

  Also, thanks to many people in the community who have tested these
  patches locally.

  Lastly, this code will bake in linux-next before being merged into
  v5.16.

  Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
  ------------------------------------------------------------

  This patchset has been outstanding since 2020, and zstd-1.4.10 was the
  latest release when it was created. Since the update patch is
  automatically generated from upstream, I could generate it from
  zstd-1.5.0.

  However, there were some large stack usage regressions in zstd-1.5.0,
  and are only fixed in the latest development branch. And the latest
  development branch contains some new code that needs to bake in the
  fuzzer before I would feel comfortable releasing to the kernel.

  Once this patchset has been merged, and we've released zstd-1.5.1, we
  can update the kernel to zstd-1.5.1, and exercise the update process.

  You may notice that zstd-1.4.10 doesn't exist upstream. This release
  is an artifical release based off of zstd-1.4.9, with some fixes for
  the kernel backported from the development branch. I will tag the
  zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
  is running a known version of zstd that can be debugged upstream.

  Why was a wrapper API added?
  ----------------------------

  The first versions of this patchset migrated the kernel to the
  upstream zstd API. It first added a shim API that supported the new
  upstream API with the old code, then updated callers to use the new
  shim API, then transitioned to the new code and deleted the shim API.
  However, Cristoph Hellwig suggested that we transition to a kernel
  style API, and hide zstd's upstream API behind that. This is because
  zstd's upstream API is supports many other use cases, and does not
  follow the kernel style guide, while the kernel API is focused on the
  kernel's use cases, and follows the kernel style guide.

  Where is the previous discussion?
  ---------------------------------

  Links for the discussions of the previous versions of the patch set
  below. The largest changes in the design of the patchset are driven by
  the discussions in v11, v5, and v1. Sorry for the mix of links, I
  couldn't find most of the the threads on lkml.org"

Link: https://lkml.org/lkml/2020/9/29/27
Link: https://www.spinics.net/lists/linux-crypto/msg58189.html
Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/
Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/
Link: https://lkml.org/lkml/2020/12/3/1195
Link: https://lkml.org/lkml/2020/12/2/1245
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html
Link: https://lkml.org/lkml/2020/9/23/1074
Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
* tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux:
  lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical
  MAINTAINERS: Add maintainer entry for zstd
  lib: zstd: Upgrade to latest upstream zstd version 1.4.10
  lib: zstd: Add decompress_sources.h for decompress_unzstd
  lib: zstd: Add kernel-specific API

Merge tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux

Pull virtio-mem update from David Hildenbrand:
 "Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem,
  now that "accidential" access to logically unplugged memory inside
  added Linux memory blocks is no longer possible, because we:

   - Removed /dev/kmem in commit bbcd53c96071 ("drivers/char: remove
     /dev/kmem for good")

   - Disallowed access to virtio-mem device memory via /dev/mem in
     commit 2128f4e21aa ("virtio-mem: disallow mapping virtio-mem memory
     via /dev/mem")

   - Sanitized access to virtio-mem device memory via /proc/kcore in
     commit 0daa322b8ff9 ("fs/proc/kcore: don't read offline sections,
     logically offline pages and hwpoisoned pages")

   - Sanitized access to virtio-mem device memory via /proc/vmcore in
     commit ce2814622e84 ("virtio-mem: kdump mode to sanitize
     /proc/vmcore access")

  The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be
  required by some hypervisors implementing virtio-mem in the near
  future, so let's support it now that we safely can"

* tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux:
  virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE

perf tests: Remove bash constructs from stat_all_pmu.sh

The tests were passing but without testing and were printing the
following:

  $ ./perf test -v 90
  90: perf all PMU test                                               :
  --- start ---
  test child forked, pid 51650
  Testing cpu/branch-instructions/
  ./tests/shell/stat_all_pmu.sh: 10: [:
   Performance counter stats for 'true':

             137,307      cpu/branch-instructions/

         0.001686672 seconds time elapsed

         0.001376000 seconds user
         0.000000000 seconds sys: unexpected operator

Changing the regexes to a grep works in sh and prints this:

  $ ./perf test -v 90
  90: perf all PMU test                                               :
  --- start ---
  test child forked, pid 60186
  [...]
  Testing tlb_flush.stlb_any
  test child finished with 0
  ---- end ----
  perf all PMU test: Ok

Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Remove bash construct from record+zstd_comp_decomp.sh

Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:

  $ ./perf test -v 85
  85: Zstd perf.data compression/decompression                        :
  --- start ---
  test child forked, pid 50643
  Collecting compressed record file:
  ./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found

Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Remove bash construct from stat_bpf_counters.sh test

Currently the test skips with an error because == only works in bash:

  $ ./perf test 91 -v
  Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
  91: perf stat --bpf-counters test                                   :
  --- start ---
  test child forked, pid 44586
  ./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator
  test child finished with -2
  ---- end ----
  perf stat --bpf-counters test: Skip

Changing == to = does the same thing, but doesn't result in an error:

  ./perf test 91 -v
  Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
  91: perf stat --bpf-counters test                                   :
  --- start ---
  test child forked, pid 45833
  Skipping: --bpf-counters not supported
    Error: unknown option `bpf-counters'
  [...]
  test child finished with -2
  ---- end ----
  perf stat --bpf-counters test: Skip

Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bench futex: Fix memory leak of perf_cpu_map__new()

ASan reports memory leaks while running:

  $ sudo ./perf bench futex all

The leaks are caused by perf_cpu_map__new not being freed.
This patch adds the missing perf_cpu_map__put since it calls
cpu_map_delete implicitly.

Fixes: 9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools arch x86: Sync the msr-index.h copy with the kernel sources

To pick up the changes in:

  dae1bd58389615d4 ("x86/msr-index: Add MSRs for XFD")

Addressing these tools/perf build warnings:

    diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
    Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'

That makes the beautification scripts to pick some new entries:

  $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
  --- tools/arch/x86/include/asm/msr-index.h 2021-07-15 16:17:01.819817827 -0300
  +++ arch/x86/include/asm/msr-index.h 2021-11-06 15:49:33.738517311 -0300
  @@ -625,6 +625,8 @@

   #define MSR_IA32_BNDCFGS_RSVD 0x00000ffc

  +#define MSR_IA32_XFD 0x000001c4
  +#define MSR_IA32_XFD_ERR 0x000001c5
   #define MSR_IA32_XSS 0x00000da0

   #define MSR_IA32_APICBASE 0x0000001b
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/after
  $ diff -u /tmp/before /tmp/after
  --- /tmp/before 2021-11-13 11:10:39.964201505 -0300
  +++ /tmp/after 2021-11-13 11:10:47.902410873 -0300
  @@ -93,6 +93,8 @@
    [0x000001b0] = "IA32_ENERGY_PERF_BIAS",
    [0x000001b1] = "IA32_PACKAGE_THERM_STATUS",
    [0x000001b2] = "IA32_PACKAGE_THERM_INTERRUPT",
  + [0x000001c4] = "IA32_XFD",
  + [0x000001c5] = "IA32_XFD_ERR",
    [0x000001c8] = "LBR_SELECT",
    [0x000001c9] = "LBR_TOS",
    [0x000001d9] = "IA32_DEBUGCTLMSR",
  $

And this gets rebuilt:

  CC       /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
  INSTALL  trace_plugins
  LD       /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
  LD       /tmp/build/perf/trace/beauty/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/perf

Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written with:

  # perf trace -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR"
  ^C#
  #

If we use -v (verbose mode) we can see what it does behind the scenes:

  # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR"
  <SNIP>
  New filter for msr:read_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781)
  New filter for msr:write_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781)
  <SNIP>
  ^C#

Example with a frequent msr:

  # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
  Using CPUID AuthenticAMD-25-21-0
  0x48
  New filter for msr:read_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564)
  0x48
  New filter for msr:write_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564)
  mmap size 528384B
  Looking at the vmlinux_path (8 entries long)
  symsrc__init: build id mismatch for vmlinux.
  Using /proc/kcore for kernel data
  Using /proc/kallsyms for symbols
       0.000 pipewire/2479 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
                                         do_trace_write_msr ([kernel.kallsyms])
                                         do_trace_write_msr ([kernel.kallsyms])
                                         __switch_to_xtra ([kernel.kallsyms])
                                         __switch_to ([kernel.kallsyms])
                                         __schedule ([kernel.kallsyms])
                                         schedule ([kernel.kallsyms])
                                         schedule_hrtimeout_range_clock ([kernel.kallsyms])
                                         do_epoll_wait ([kernel.kallsyms])
                                         __x64_sys_epoll_wait ([kernel.kallsyms])
                                         do_syscall_64 ([kernel.kallsyms])
                                         entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
                                         epoll_wait (/usr/lib64/libc-2.33.so)
                                         [0x76c4] (/usr/lib64/spa-0.2/support/libspa-support.so)
                                         [0x4cf0] (/usr/lib64/spa-0.2/support/libspa-support.so)
       0.027 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
                                         do_trace_write_msr ([kernel.kallsyms])
                                         do_trace_write_msr ([kernel.kallsyms])
                                         __switch_to_xtra ([kernel.kallsyms])
                                         __switch_to ([kernel.kallsyms])
                                         __schedule ([kernel.kallsyms])
                                         schedule_idle ([kernel.kallsyms])
                                         do_idle ([kernel.kallsyms])
                                         cpu_startup_entry ([kernel.kallsyms])
                                         start_kernel ([kernel.kallsyms])
                                         secondary_startup_64_no_verify ([kernel.kallsyms])
  #

Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YY%2FJdb6on7swsn+C@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync drm/i915_drm.h with the kernel sources

To pick up the changes in:

  e5e32171a2cf1e43 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
  9409eb35942713d0 ("drm/i915: Expose logical engine instance to user")
  ea673f17ab763879 ("drm/i915/uapi: Add comment clarifying purpose of I915_TILING_* values")
  d3ac8d42168a9be7 ("drm/i915/pxp: interfaces for using protected objects")
  cbbd3764b2399ad8 ("drm/i915/pxp: Create the arbitrary session after boot")

That don't add any new ioctl, so no changes in tooling.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Huang, Sean Z <sean.z.huang@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync sound/asound.h with the kernel sources

To pick up the changes in:

  5aec579e08e4f2be ("ALSA: uapi: Fix a C++ style comment in asound.h")

That is just changing a // style comment to /* */.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
  diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h

Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>