drm/msm/adreno: Defer enabling runpm until hw_init()

To avoid preventing the display from coming up before the rootfs is
mounted, without resorting to packing fw in the initrd, the GPU has
this limbo state where the device is probed, but we aren't ready to
start sending commands to it.  This is particularly problematic for
a6xx, since the GMU (which requires fw to be loaded) is the one that
is controlling the power/clk/icc votes.

So defer enabling runpm until we are ready to call gpu->hw_init(),
as that is a point where we know we have all the needed fw and are
ready to start sending commands to the coproc's.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489337/
Link: https://lore.kernel.org/r/20220613182036.2567963-1-robdclark@gmail.com

drm/msm/gem: Drop obj lock in msm_gem_free_object()

The only reason we grabbed the lock was to satisfy a bunch of places
that WARN_ON() if called without the lock held.  But this angers lockdep
which doesn't realize no one else can be holding the lock by the time we
end up destroying the object (and sees what would otherwise be a locking
inversion between reservation_ww_class_mutex and fs_reclaim).

Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/14
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489364/
Link: https://lore.kernel.org/r/20220613205032.2652374-1-robdclark@gmail.com

drm/msm/dp: remove dp_display_en/disable prototypes and data argument

Remove unused dp_display_en/disable prototypes. While we are at it,
remove extra 'data' argument that is unused.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490104/
Link: https://lore.kernel.org/r/20220617232434.1139950-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: rename second dp_display_enable()'s argument

To follow up recent changes, rename (and change type of) second
dp_display_enable()'s argument from generic u32 data to bool
force_link_train, which is later passed to dp_ctrl_on_stream().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490102/
Link: https://lore.kernel.org/r/20220617232434.1139950-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: remove unused stubs

Refactoring DP code transformed several functions into empty stubs.
Remove them.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490100/
Link: https://lore.kernel.org/r/20220617232434.1139950-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Do not propagate void return values

With sparse ("make C=2"), lots of

  error: return expression in void function

messages are seen.

Fix this by removing the return statements to propagate void return
values.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Patchwork: https://patchwork.freedesktop.org/patch/492529/
Link: https://lore.kernel.org/r/0083bc7e23753c19902580b902582ae499b44dbf.1657113388.git.geert@linux-m68k.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/gpu: Add GEM debug label to devcore

When trying to understand an iova fault devcore, once you figure out
which buffer we accessed beyond the end of, it is useful to see the
buffer's debug label.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/491910/
Link: https://lore.kernel.org/r/20220629211919.563585-3-robdclark@gmail.com

drm/msm/gpu: Capture all BO addr+size in devcore

It is useful to know what buffers userspace thinks are associated with
the submit, even if we don't care to capture their content.  This brings
things more inline with $debugfs/rd cmdstream dumping.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/491908/
Link: https://lore.kernel.org/r/20220629211919.563585-2-robdclark@gmail.com

drm/msm: switch msm_kms_init_aspace() to use device_iommu_mapped()

Change msm_kms_init_aspace() to use generic function
device_iommu_mapped() instead of the fwnode-specific interface
dev_iommu_fwspec_get(). While we are at it, stop referencing
platform_bus_type directly and use the bus of the IOMMU device.

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489703/
Link: https://lore.kernel.org/r/20220616081106.350262-6-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: move KMS aspace init to the separate helper

MDP5 and DPU drivers have the same piece of code now to initialize
IOMMU and GEM address space. Move it to the msm_drv.c

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489701/
Link: https://lore.kernel.org/r/20220616081106.350262-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Stop using iommu_present()

Even if some IOMMU has registered itself on the platform "bus", that
doesn't necessarily mean it provides translation for the device we
care about. Replace iommu_present() with a more appropriate check.

On Qualcomm platforms the IOMMU can be specified either for the MDP/DPU
device or for its parent MDSS device depending on the actual platform.
Check both of them, since that is how both DPU and MDP5 drivers work.

Co-developed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/489699/
Link: https://lore.kernel.org/r/20220616081106.350262-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/mdp5: move iommu_domain_alloc() call close to its usage

Move iommu_domain_alloc() in front of adress space/IOMMU initialization.
This allows us to drop final bits of struct mdp5_cfg_platform which
remained from the pre-DT days.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489695/
Link: https://lore.kernel.org/r/20220616081106.350262-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: check both DPU and MDSS devices for the IOMMU

Follow the lead of MDP5 driver and check both DPU and MDSS devices for
the IOMMU specifiers.

Historically DPU devices had IOMMU specified in the MDSS device tree
node, but as some of MDP5 devices are being converted to the supported
by the DPU driver, the driver should adapt and check both devices.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489696/
Link: https://lore.kernel.org/r/20220616081106.350262-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Fix %d vs %u

In debugging fence rollover, I noticed that GPU state capture and
devcore dumps were showing me negative fence numbers.  Let's fix that
and some related signed vs unsigned confusion.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489621/
Link: https://lore.kernel.org/r/20220615163532.3013035-1-robdclark@gmail.com

drm/msm/dpu: move struct dpu_hw_blk definition to dpu_hw_utils.h

There is little point in having a separate header just for a single
opaque struct definition. Drop it now and move the struct to the
dpu_hw_util.h header.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488016/
Link: https://lore.kernel.org/r/20220601161349.1517667-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: merge base_off with blk_off in struct dpu_hw_blk_reg_map

There is little point in keeping a separate MDP address and block offset
in this struct. Merge them to form a new blk_addr field used for all
register access.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488017/
Link: https://lore.kernel.org/r/20220601161349.1517667-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: drop length from struct dpu_hw_blk_reg_map

We (nearly) do not use the length field from struct dpu_hw_blk_reg_map,
so we can drop it safely.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488013/
Link: https://lore.kernel.org/r/20220601161349.1517667-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: drop xin_id from struct dpu_hw_blk_reg_map

Drop the unused field xin_id.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488011/
Link: https://lore.kernel.org/r/20220601161349.1517667-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Allow larger address space size

The restriction to 4G was strictly to work around 64b math bug in some
versions of SQE firmware.  This appears to be fixed in a650+ SQE fw, so
allow a larger address space size on these devices.

Also, add a modparam override for debugging and igt.

v2: Send the right version of the patch (ie. the one that actually
    compiles)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/487601/
Link: https://lore.kernel.org/r/20220529180428.2577832-1-robdclark@gmail.com

drm/msm/adreno: Fix up formatting

Leading spaces are not something checkpatch likes, and it says so when
they are present. Use tabs consistently to indent function body and
unwrap a 83-char-long line, as 100 is cool nowadays.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487592/
Link: https://lore.kernel.org/r/20220528160353.157870-4-konrad.dybcio@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add speedbin support for A619 GPU

There are various SKUs of A619, ranging from 565 MHz to 850 MHz, depending
on the bin. Add support for distinguishing them, so that proper frequency
ranges can be applied, depending on the HW.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487590/
Link: https://lore.kernel.org/r/20220528160353.157870-3-konrad.dybcio@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Add A619 support

Add support for the Adreno 619 GPU, as found in Snapdragon 690 (SM6350),
480 (SM4350) and 750G (SM7225).

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487588/
Link: https://lore.kernel.org/r/20220528160353.157870-2-konrad.dybcio@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Remove dead code

This BUG_ON will never be reached, and there is a comment 20 above
explaining why.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487586/
Link: https://lore.kernel.org/r/20220528160353.157870-1-konrad.dybcio@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy

From testing on sc7180-trogdor devices, reading the GMU registers
needs the GMU clocks to be enabled. Those clocks get turned on in
a6xx_gmu_resume(). Confusingly enough, that function is called as a
result of the runtime_pm of the GPU "struct device", not the GMU
"struct device". Unfortunately the current a6xx_gpu_busy() grabs a
reference to the GMU's "struct device".

The fact that we were grabbing the wrong reference was easily seen to
cause crashes that happen if we change the GPU's pm_runtime usage to
not use autosuspend. It's also believed to cause some long tail GPU
crashes even with autosuspend.

We could look at changing it so that we do pm_runtime_get_if_in_use()
on the GPU's "struct device", but then we run into a different
problem. pm_runtime_get_if_in_use() will return 0 for the GPU's
"struct device" the whole time when we're in the "autosuspend
delay". That is, when we drop the last reference to the GPU but we're
waiting a period before actually suspending then we'll think the GPU
is off. One reason that's bad is that if the GPU didn't actually turn
off then the cycle counter doesn't lose state and that throws off all
of our calculations.

Let's change the code to keep track of the suspend state of
devfreq. msm_devfreq_suspend() is always called before we actually
suspend the GPU and msm_devfreq_resume() after we resume it. This
means we can use the suspended state to know if we're powered or not.

NOTE: one might wonder when exactly our status function is called when
devfreq is supposed to be disabled. The stack crawl I captured was:
  msm_devfreq_get_dev_status
  devfreq_simple_ondemand_func
  devfreq_update_target
  qos_notifier_call
  qos_max_notifier_call
  blocking_notifier_call_chain
  pm_qos_update_target
  freq_qos_apply
  apply_constraint
  __dev_pm_qos_update_request
  dev_pm_qos_update_request
  msm_devfreq_idle_work

Fixes: eadf79286a4b ("drm/msm: Check for powered down HW in the devfreq callbacks")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/489124/
Link: https://lore.kernel.org/r/20220610124639.v4.1.Ie846c5352bc307ee4248d7cab998ab3016b85d06@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', 'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi', 'msm-next-lumag-mdp5' and 'msm-next-lumag-mdp4' into msm-next-lumag

Changes in this merge:
Core:
- client utilization via fdinfo support
- fix fence rollover issue

DPU:
- constification of HW catalog
- support for using encoder as CRC source
- WB support on sc7180
- WB resolution fixes
- enable DSPP support for sc7280

DP:
- dropped custom bulk clock implementation
- made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable
- fix link retraining on resolution change

MDP5:
- MSM8953 perf data

HDMI:
- YAML'ification of schema
- dropped obsolete GPIO support
- misc cleanups

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Fix fence rollover issue

And while we are at it, let's start the fence counter close to the
rollover point so that if issues slip in, they are more obvious.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: fde5de6cb461 ("drm/msm: move fence code to it's own file")
Fixes: 5f3aee4ceb5b ("drm/msm: Handle fence rollover")
Patchwork: https://patchwork.freedesktop.org/patch/489619/
Link: https://lore.kernel.org/r/20220615162435.3011793-1-robdclark@gmail.com
[DB: fixed the conflict while applying the patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Use div64_ul instead of do_div

Fix following coccicheck warning:
drivers/gpu/drm/msm/msm_gpu_devfreq.c:72:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead.

Use div64_ul instead of do_div to avoid a possible truncation.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Patchwork: https://patchwork.freedesktop.org/patch/483499/
Link: https://lore.kernel.org/r/20220426132126.686447-1-wanjiabing@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Expose client engine utilization via fdinfo

Similar to AMD commit
874442541133 ("drm/amdgpu: Add show_fdinfo() interface"), using the
infrastructure added in previous patches, we add basic client info
and GPU engine utilisation for msm.

Example output:

# cat /proc/`pgrep glmark2`/fdinfo/6
pos: 0
flags: 02400002
mnt_id: 21
ino: 162
drm-driver: msm
drm-client-id: 7
drm-engine-gpu: 1734371319 ns
drm-cycles-gpu: 1153645024
drm-maxfreq-gpu: 800000000 Hz

See also: https://patchwork.freedesktop.org/patch/468505/

v2: Add dev-maxfreq-$engine and update drm-usage-stats.rst
v3: spelling and compiler warning

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Patchwork: https://patchwork.freedesktop.org/patch/488906/
Link: https://lore.kernel.org/r/20220609174213.2265938-2-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm: Add DRM_GEM_FOPS

The DEFINE_DRM_GEM_FOPS() helper is a bit limiting if a driver wants to
provide additional file ops, like show_fdinfo().

v2: Split out DRM_GEM_FOPS instead of making DEFINE_DRM_GEM_FOPS
    varardic
v3: nits

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Patchwork: https://patchwork.freedesktop.org/patch/488904/
Link: https://lore.kernel.org/r/20220609174213.2265938-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm: Make msm_gem_free_object() static

Misc small cleanup I noticed.  Not called from another object file since
commit 3c9edd9c85f5 ("drm/msm: Introduce GEM object funcs")

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489362/
Link: https://lore.kernel.org/r/20220613204910.2651747-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/disp/dpu1: add dspp support for sc7280

Add destination side post processing hw block support in sc7280.

This hwblock enablement is necessary to support color features
like CT Matix (Ex: Night Light feature)

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490382/
Link: https://lore.kernel.org/r/1655802387-15275-1-git-send-email-quic_kalyant@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/mdp5: Add perf data for MDP v1.16

Add the perf data for the mdp found in msm8953.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489153/
Link: https://lore.kernel.org/r/20220610225304.267508-1-luca@z3ntu.xyz
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/mdp4: get rid of struct mdp4_platform_config

Struct mdp4_platform_config is a relict from the DT-conversion time.
Move the max_clk field to the mdp4_kms_init(), the place where it is
used and drop the struct mdp4_platform_config and the mdp4_get_config()
function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/485050/
Link: https://lore.kernel.org/r/20220505135008.1351533-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/mdp4: move iommu_domain_alloc() call close to its usage

Move iommu_domain_alloc() in front of adress space/IOMMU initialization.
This allows us to drop it from struct mdp4_cfg_platform which
remained from the pre-DT days.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/485049/
Link: https://lore.kernel.org/r/20220505135008.1351533-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: support attaching the "next" bridge

There might be a chain of bridges attached to the HDMI node
(including but not limited to the display-connector bridge). Add support
for attaching them right to the HDMI bridge chain.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489709/
Link: https://lore.kernel.org/r/20220616085057.432353-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: drop empty bridge callbacks

Drop empty callbacks msm_hdmi_bridge_enable() and
msm_hdmi_bridge_disable().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489707/
Link: https://lore.kernel.org/r/20220616085054.432317-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirements

Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface
clock (this is the same config as is used by the 8960).

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488863/
Link: https://lore.kernel.org/r/20220609122350.3157529-13-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: reuse MSM8960's config for MSM8660

MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse
MSM8960's config for the MSM8660 (8x60).

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488864/
Link: https://lore.kernel.org/r/20220609122350.3157529-12-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: merge platform config for 8974/8084/8994/8996

Since there is no more difference between the HDMI platform data
between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a
single entry.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488868/
Link: https://lore.kernel.org/r/20220609122350.3157529-11-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: drop hpd_regs usage on 8x74/8084

The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply
regulators that are to be enabled for HPD to work. Currently these
regulators contain the hpd_gdsc, which was replaced by the power-domains
support and hpd-5v/hpd-5v-en, which are not used by the chip itself.
They power up the ESD bridge.
However it is a separate device which should be represented separately
in the device tree.
None of upstreamed devices support these properties. Thus drop support
for them from the HDMI driver.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488860/
Link: https://lore.kernel.org/r/20220609122350.3157529-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: drop empty 'none' regulator lists

Several platform configs use empty 'none' regulator arrays. They are not
necessary, as the code will use corresponding _cnt field and skip the
array completely. Drop them now.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488861/
Link: https://lore.kernel.org/r/20220609122350.3157529-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform

DB820c makes use of core-vcc-supply and core-vdda-supply, however the
driver code doesn't support these regulators. Enable them for HDMI on
8996 platform.

Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488857/
Link: https://lore.kernel.org/r/20220609122350.3157529-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: drop unused GPIO support

The HDMI driver has code to configure extra GPIOs, which predates
pinctrl support. Nowadays all platforms should use pinctrl instead.
Neither of upstreamed Qualcomm platforms uses these properties, so it's
safe to drop them.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488858/
Link: https://lore.kernel.org/r/20220609122350.3157529-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: drop the hdmi-mux support

With the last (and only) in-kernel user of hdmi-mux regulator, drop it
from the HDMI driver.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488855/
Link: https://lore.kernel.org/r/20220609122350.3157529-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecated

hdmi-mux-supply is not used by the SoC's HDMI block, it is thought to
power up the external logic. Thus it should not be a part of HDMI
bindings, but it should be declared at some other device in the DT (like
HDMI mux, bridge, etc). Mark it as deprecated.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488870/
Link: https://lore.kernel.org/r/20220609122350.3157529-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecated

Mark obsolete GPIO properties as deprecated. They are not used by
existing device trees. While we are at it, also drop them from the
schema example.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488852/
Link: https://lore.kernel.org/r/20220609122350.3157529-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: display/msm: hdmi: split and convert to yaml

Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.

Changes to schema:
HDMI:
 - fixed reg-names numbering to match 0..3 instead 0,1,3,4
 - dropped qcom,tx-ddc-* from example, they were not documented
 - make phy-names deprecated, drop it from the examples

PHY:
 - moved into phy/ directory
 - split into QMP and non-QMP PHY schemas

Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488850/
Link: https://lore.kernel.org/r/20220609122350.3157529-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: use ARRAY_SIZE for calculating num_descs

If for some reason the msm_dp_config::descs array starts from non-zero
index or contains the hole, setting the msm_dp_config::num_descs might
be not that obvious and error-prone. Use ARRAY_SIZE to set this field
rather than encoding the value manually.

Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/491399/
Link: https://lore.kernel.org/r/20220627165413.657142-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dsi: Use single function for reset

There is currently two function for performing reset: dsi_sw_reset and
dsi_sw_reset_restore. Only difference between those is that latter one
assumes that DSI controller is enabled. In contrary former one assumes
that controller is disabled and executed during power-on. However this
assumtion is not true mobile devices which have boot splash set up by
boot-loader.

This patch removes dsi_sw_reset_restore and makes dsi_sw_reset disable
DSI controller during reset sequence if it's enabled.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489152/
Link: https://lore.kernel.org/r/20220610220259.220622-1-luca@z3ntu.xyz
[DB: fixed the typo in the commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/hdmi: fill the pwr_regs bulk regulators

Conversion to use bulk regulator API omitted filling the pwr_regs with
proper regulator IDs. This was left unnoticed, since none of my testing
platforms has used the pwr_regs. Fix this by propagating regulator ids
properly.

Fixes: 31b3b1f5e352 ("drm/msm/hdmi: use bulk regulator API")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488847/
Link: https://lore.kernel.org/r/20220609113148.3149194-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: Remove encoder pointer from struct msm_dp

We don't need to stash the encoder here. Instead we can simply pass it
around as an argument.

Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/491187/
Link: https://lore.kernel.org/r/20220625002811.3225344-1-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: make dp_bridge_mode_valid() more precise

Make dp_connector_mode_valid() return precise MODE_CLOCK_HIGH rather
than generic MODE_BAD in case the mode clock is higher than
DP_MAX_PIXEL_CLK_KHZ (675 MHz).

Reviewed-by: Kuogee Hsieh<quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489554/
Link: https://lore.kernel.org/r/20220615115920.6768-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: msm: update maintainers list with proper id

Use quic id instead of codeaurora id in maintainers list
for display devicetree bindings.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488296/
Link: https://lore.kernel.org/r/1654286979-11072-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: simplify and unify dpu_encoder_get_intf and dpu_encoder_get_wb

Remove extra nestting level from the dpu_encoder_get_intf(), replacing it
with the explicit return in case the INTF_WB was passed to the function.

While we are at it, also change dpu_encoder_get_wb() to also use
explicit return rather than the goto.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/491189/
Link: https://lore.kernel.org/r/20220625003028.383259-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

dt-bindings: msm/dp: List supplies in the bindings

We're supposed to list the supplies in the dt bindings but there are
none in the DP controller bindings. Looking at the Linux driver and
existing device trees, we can see that two supplies are expected:
- vdda-0p9-supply
- vdda-1p2-supply

Let's list them both in the bindings. Note that the datasheet for
sc7280 doesn't describe these supplies very verbosely. For the 0p9
supply, for instance, it says "Power for eDP 0.9 V circuits". This
this is obvious from the property name, we don't bother cluttering the
bindings with a description.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/483373/
Link: https://lore.kernel.org/r/20220425140619.1.Ibfde5a26a7182c4b478d570c23d2649823ac2cce@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add interface support for CRC debugfs

Add support for writing CRC values for the interface block to
the debugfs by calling the necessary MISR setup/collect methods.

Changes since V1:
- Set values_cnt to only include phys with backing hw_intf
- Loop over all drm_encs connected to crtc

Changes since V2:
- Remove vblank.h inclusion
- Change `pos + i` to `pos + entries`
- Initialize values_cnt to 0 for encoder
- Change DPU_CRTC_CRC_SOURCE_INTF to DPU_CRTC_CRC_SOURCE_ENCODER (and
  "intf" to "enc")
- Change dpu_encoder_get_num_phys to dpu_encoder_get_num_hw_intfs
- Add checks for setup_misr and collect_misr in
  dpu_encoder_get_num_hw_intfs

Changes since V3:
- Remove extra whitespace
- Change "enc" to "encoder"
- Move crcs array to dpu_crtc_get_encoder_crc
- Rename dpu_encoder_get_num_hw_intfs to dpu_encoder_get_crc_values_cnt

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490736/
Link: https://lore.kernel.org/r/20220622171835.7558-5-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: rewrite dss_module_power to use bulk clock functions

In order to simplify DP code, drop hand-coded loops over clock arrays,
replacing them with clk_bulk_* functions.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/474717/
Link: https://lore.kernel.org/r/20220217055529.499829-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Add MISR register support for interface

Add support for setting MISR registers within the interface

Changes since V1:
- Replaced dpu_hw_intf collect_misr and setup_misr implementations with
  calls to dpu_hw_utils helper methods

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490730/
Link: https://lore.kernel.org/r/20220622171835.7558-4-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: inline dp_power_clk_set_rate()

Inline the dp_power_clk_set_rate() function, replacing it with the call
to msm_dss_enable_clk().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/474719/
Link: https://lore.kernel.org/r/20220217055529.499829-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Move MISR methods to dpu_hw_util

Move layer mixer specific MISR methods to generalized helper methods.
This will make it easier to add CRC support for other blocks in the
future.

Changes since V2:
- Reordered parameters so that offsets are after hw_blk_reg_map
- Fixed mismatched whitespace in bitmask definitions

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490732/
Link: https://lore.kernel.org/r/20220622171835.7558-3-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: set stream_pixel rate directly

The only clock for which we set the rate is the "stream_pixel". Rather
than storing the rate and then setting it by looping over all the
clocks, set the clock rate directly.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/474714/
Link: https://lore.kernel.org/r/20220217055529.499829-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dp: "inline" dp_ctrl_set_clock_rate("ctrl_link")

"ctrl_link" is the clock from DP_CTRL_PM module. The result of setting
the rate for it would be a call to dev_pm_opp_set_rate(). Instead of
saving the rate inside struct dss_module_power, call the
devm_pm_opp_set_rate() directly.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/474712/
Link: https://lore.kernel.org/r/20220217055529.499829-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: Move LM CRC code into separate method

Move layer mixer-specific section of dpu_crtc_get_crc() into a separate
helper method. This way, we can make it easier to get CRCs from other HW
blocks by adding other get_crc helper methods.

Changes since V1:
- Move common bitmasks to dpu_hw_util.h
- Move common CRC methods to dpu_hw_util.c
- Update copyrights
- Change crcs array to a dynamically allocated array and added it as a
  member of crtc_state

Changes since V2:
- Put changes for hw_util into a separate commit
- Revert crcs array to a static array
- Add else case for set_crc_source to return EINVAL if no valid source
  is selected
- Add DPU_CRTC_MAX_CRC_ENTRIES macro

Changes since V3:
- Move crcs array into dpu_crtc_get_lm_crc
- Remove comment about crcs array in dpu_crtc_state struct
- Revert `lm` rename
- Remove DPU_CRTC_MAX_CRC_ENTRIES macro
- Return EINVAL in dpu_crtc_get_crc if no valid CRC source is set

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490735/
Link: https://lore.kernel.org/r/20220622171835.7558-2-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: remove hard-coded linewidth limit for writeback

Remove the hard-coded limit for writeback and lets start using
the one from catalog instead.

changes in v3:
- correct the Fixes tag

Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489888/
Link: https://lore.kernel.org/r/1655406084-17407-3-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: fix maxlinewidth for writeback block

Writeback block for sm8250 was using the default maxlinewidth
of 2048. But this is not right as it supports upto 4096.

This should have no effect on most resolutions as we are
still limiting upto maxlinewidth of SSPP for adding the modes.

Fix the maxlinewidth for writeback block on sm8250.

changes in v3:
- correct the Fixes tag

Fixes: 53324b99bd7b ("drm/msm/dpu: add writeback blocks to the sm8250 DPU catalog")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489887/
Link: https://lore.kernel.org/r/1655406084-17407-2-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: move intf and wb assignment to dpu_encoder_setup_display()

intf and wb resources are not dependent on the rm global
state so need not be allocated during dpu_encoder_virt_atomic_mode_set().

Move the allocation of intf and wb resources to dpu_encoder_setup_display()
so that we can utilize the hw caps even during atomic_check() phase.

Since dpu_encoder_setup_display() already has protection against
setting invalid intf_idx and wb_idx, these checks can now
be dropped as well.

changes in v2:
- add phys->hw_intf and phys->hw_wb checks back

changes in v3:
- correct the Fixes tag

Fixes: e02a559a720f ("drm/msm/dpu: make changes to dpu_encoder to support virtual encoder")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489885/
Link: https://lore.kernel.org/r/1655406084-17407-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: drop enum msm_display_caps

After the commit c46f0d69039c ("drm/msm: remove unused hotplug and edid
macros from msm_drv.h") the msm_display_caps enum contains two bits
describing whether the encoder should work in video or command mode.
Drop the enum and replace capabilities field in struct msm_display_info
with boolean is_cmd_mode field.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/485454/
Link: https://lore.kernel.org/r/20220507115942.1705872-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: dont_use IS_ERR_OR_NULL for encoder phys backends

The functions dpu_encoder_phys_foo_init() can not return NULL. Replace
corresponding IS_ERR_OR_NULL() checks with just IS_ERR().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/485452/
Link: https://lore.kernel.org/r/20220507115942.1705872-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: make dpu hardware catalog static const

Replace superfluous cfg_init functions, which just assign a static
config to the struct dpu_mdss_cfg, with static instances of struct
dpu_mdss_cfg.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488166/
Link: https://lore.kernel.org/r/20220602202447.1755115-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: constify struct dpu_mdss_cfg

Mark struct dpu_mdss_cfg instance as a const pointer. This is mostly a
preparation for the next patch.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488164/
Link: https://lore.kernel.org/r/20220602202447.1755115-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: change catalog->dma_cfg to be a const pointer

Change dpu_mdss_cfg::dma_cfg to be a const pointer rather than embedding
the dpu_reg_dma_cfg struct into the struct dpu_mdss_cfg.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488162/
Link: https://lore.kernel.org/r/20220602202447.1755115-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: change catalog->perf to be a const pointer

Change dpu_mdss_cfg::perf to be a const pointer rather than embedding
the dpu_perf_cfg struct into the struct dpu_mdss_cfg.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488158/
Link: https://lore.kernel.org/r/20220602202447.1755115-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: remove hwversion field from data structures

The driver should not depend on hw revision for detecting features.
Instead it should use features from the hw catalog. Drop the hwversion
field from struct dpu_mdss_cfg and struct dpu_hw_blk_reg_map.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488160/
Link: https://lore.kernel.org/r/20220602202447.1755115-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: move VBIF_XINL_QOS_LVL_REMAP size to hw_catalog

Rather than detecting VBIF_XINL_QOS_LVL_REMAP_000 based on the
hwversion, push the offset to the hw_catalog.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488156/
Link: https://lore.kernel.org/r/20220602202447.1755115-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: use feature bit for LM combined alpha check

Rather than checking hwversion, follow the usual patter and add special
bit to the lm->features to check whether the LM has combined or separate
alpha registers. While we are at it, rename
dpu_hw_lm_setup_blend_config_sdm845() to
dpu_hw_lm_setup_blend_config_combined_alpha().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488155/
Link: https://lore.kernel.org/r/20220602202447.1755115-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/msm/dpu: add writeback support for sc7180

Add writeback support for sc7180 devices. This has been
validated on sc7180 chromebook using IGT writeback test
suite.

localhost /usr/local/libexec/igt-gpu-tools # ./kms_writeback
Starting subtest: writeback-pixel-formats
Subtest writeback-pixel-formats: SUCCESS (0.001s)
Starting subtest: writeback-invalid-parameters
Subtest writeback-invalid-parameters: SUCCESS (0.004s)
Starting subtest: writeback-fb-id
Subtest writeback-fb-id: SUCCESS (0.009s)
Starting subtest: writeback-check-output
Subtest writeback-check-output: SUCCESS (0.203s)

Adding this will increase IGT coverage on chromebooks and also
allow using writeback functionality for other use-cases as
necessary.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/485787/
Link: https://lore.kernel.org/r/20220510235439.31916-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Merge tag 'drm-msm-fixes-2022-06-28' into msm-next-staging

Merge v5.19 fixes to avoid merge conflicts

Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/gem: Fix error return on fence id alloc fail

This was a typo, we didn't actually want to return zero.

Fixes: a61acbbe9cf8 ("drm/msm: Track "seqno" fences by idr")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/491145/
Link: https://lore.kernel.org/r/20220624184528.4036837-1-robdclark@gmail.com

drm/msm/dpu: Fix variable dereferenced before check

Fixes the following smatch warning:

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:261
dpu_encoder_phys_wb_atomic_check() warn: variable dereferenced before check 'conn_state'

Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: sunliming <sunliming@kylinos.cn>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490850/
Link: https://lore.kernel.org/r/20220623012707.453972-1-sunliming@kylinos.cn
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()

During msm initialize phase, dp_display_unbind() will be called to undo
initializations had been done by dp_display_bind() previously if there is
error happen at msm_drm_bind. Under this kind of circumstance, drm_device
may not be populated completed which causes system crash at drm_dev_dbg().
This patch reset drm_dev to NULL so that following drm_dev_dbg() will not
refer to any internal fields of drm_device to prevent system from crashing.
Below are panic stack trace,

[   53.584904] Unable to handle kernel paging request at virtual address 0000000070018001
.
[   53.702212] Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT)
[   53.710445] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   53.717596] pc : string_nocheck+0x1c/0x64
[   53.721738] lr : string+0x54/0x60
[   53.725162] sp : ffffffc013d6b650
[   53.728590] pmr_save: 000000e0
[   53.731743] x29: ffffffc013d6b650 x28: 0000000000000002 x27: 0000000000ffffff
[   53.739083] x26: ffffffc013d6b710 x25: ffffffd07a066ae0 x24: ffffffd07a419f97
[   53.746420] x23: ffffffd07a419f99 x22: ffffff81fef360d4 x21: ffffff81fef364d4
[   53.753760] x20: ffffffc013d6b6f8 x19: ffffffd07a06683c x18: 0000000000000000
[   53.761093] x17: 4020386678302f30 x16: 00000000000000b0 x15: ffffffd0797523c8
[   53.768429] x14: 0000000000000004 x13: ffff0000ffffff00 x12: ffffffd07a066b2c
[   53.775780] x11: 0000000000000000 x10: 000000000000013c x9 : 0000000000000000
[   53.783117] x8 : ffffff81fef364d4 x7 : 0000000000000000 x6 : 0000000000000000
[   53.790445] x5 : 0000000000000000 x4 : ffff0a00ffffff04 x3 : ffff0a00ffffff04
[   53.797783] x2 : 0000000070018001 x1 : ffffffffffffffff x0 : ffffff81fef360d4
[   53.805136] Call trace:
[   53.807667]  string_nocheck+0x1c/0x64
[   53.811439]  string+0x54/0x60
[   53.814498]  vsnprintf+0x374/0x53c
[   53.818009]  pointer+0x3dc/0x40c
[   53.821340]  vsnprintf+0x398/0x53c
[   53.824854]  vscnprintf+0x3c/0x88
[   53.828274]  __trace_array_vprintk+0xcc/0x2d4
[   53.832768]  trace_array_printk+0x8c/0xb4
[   53.836900]  drm_trace_printf+0x74/0x9c
[   53.840875]  drm_dev_dbg+0xfc/0x1b8
[   53.844480]  dp_pm_suspend+0x70/0xf8
[   53.848164]  dpm_run_callback+0x60/0x1a0
[   53.852222]  __device_suspend+0x304/0x3f4
[   53.856363]  dpm_suspend+0xf8/0x3a8
[   53.859959]  dpm_suspend_start+0x8c/0xc0

Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/490756/
Link: https://lore.kernel.org/r/1655927731-22396-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

drm/msm/dpu: Increment vsync_cnt before waking up userspace

The 'vsync_cnt' is used to count the number of frames for a crtc.
Unfortunately, we increment the count after waking up userspace via
dpu_crtc_vblank_callback() calling drm_crtc_handle_vblank().
drm_crtc_handle_vblank() wakes up userspace processes that have called
drm_wait_vblank_ioctl(), and if that ioctl is expecting the count to
increase it won't.

Increment the count before calling into the drm APIs so that we don't
have to worry about ordering the increment with anything else in drm.
This fixes a software video decode test that fails to see frame counts
increase on Trogdor boards.

Cc: Mark Yacoub <markyacoub@chromium.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Fixes: 885455d6bf82 ("drm/msm: Change dpu_crtc_get_vblank_counter to use vsync count.")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/490531/
Link: https://lore.kernel.org/r/20220622023855.2970913-1-swboyd@chromium.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

drm/msm/dp: force link training for display resolution change

Display resolution change is implemented through drm modeset. Older
modeset (resolution) has to be disabled first before newer modeset
(resolution) can be enabled. Display disable will turn off both
pixel clock and main link clock so that main link have to be
re-trained during display enable to have new video stream flow
again. At current implementation, display enable function manually
kicks up irq_hpd_handle which will read panel link status and start
link training if link status is not in sync state.

However, there is rare case that a particular panel links status keep
staying in sync for some period of time after main link had been shut
down previously at display disabled. In this case, main link retraining
will not be executed by irq_hdp_handle(). Hence video stream of newer
display resolution will fail to be transmitted to panel due to main
link is not in sync between host and panel.

This patch will bypass irq_hpd_handle() in favor of directly call
dp_ctrl_on_stream() to always perform link training in regardless of
main link status. So that no unexpected exception resolution change
failure cases will happen. Also this implementation are more efficient
than manual kicking off irq_hpd_handle function.

Changes in v2:
-- set force_link_train flag on DP only (is_edp == false)

Changes in v3:
-- revise commit  text
-- add Fixes tag

Changes in v4:
-- revise commit  text

Changes in v5:
-- fix spelling at commit text

Changes in v6:
-- split dp_ctrl_on_stream() for phy test case
-- revise commit text for modeset

Changes in v7:
-- drop 0 assignment at local variable (ret = 0)

Changes in v8:
-- add patch to remove pixel_rate from dp_ctrl

Changes in v9:
-- forward declare dp_ctrl_on_stream_phy_test_report()

Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489895/
Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: limit wb modes based on max_mixer_width

As explained in [1], using max_linewidth to limit the modes
does not seem to remove 4K modes on chipsets such as
sm8250 where the max_linewidth actually supports 4k.

This would have been alright if dual SSPP support was
present but otherwise fails the per SSPP bandwidth check.

The ideal way to implement this would be to filter out
the modes which will exceed the bandwidth check by computing
it.

But this would be an exhaustive solution till we have
dual SSPP support.

Let's instead use max_mixer_width to limit the modes.

max_mixer_width still remains 2560 on sm8250 so even if
the max_linewidth is 4096, the only way 4k modes could have
been supported is to have source split enabled on the SSPP.

Since source split support is not enabled yet in DPU driver,
enforce max_mixer_width as the upper limit on the modes.

[1] https://patchwork.freedesktop.org/patch/489662/

Fixes: e67dcecda06f ("drm/msm/dpu: limit writeback modes according to max_linewidth")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489893/
Link: https://lore.kernel.org/r/1655407606-21760-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind()

During msm initialize phase, dp_display_unbind() will be called to undo
initializations had been done by dp_display_bind() previously if there is
error happen at msm_drm_bind. In this case, core_initialized flag had to
be check to make sure clocks is on before update DP controller register
to disable HPD interrupts. Otherwise system will crash due to below NOC
fatal error.

QTISECLIB [01f01a7ad]CNOC2 ERROR: ERRLOG0_LOW = 0x00061007
QTISECLIB [01f01a7ad]GEM_NOC ERROR: ERRLOG0_LOW = 0x00001007
QTISECLIB [01f0371a0]CNOC2 ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f055297]GEM_NOC ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f072beb]CNOC2 ERROR: ERRLOG1_LOW = 0x00000024
QTISECLIB [01f0914b8]GEM_NOC ERROR: ERRLOG1_LOW = 0x00000042
QTISECLIB [01f0ae639]CNOC2 ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0cc73f]GEM_NOC ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0ea092]CNOC2 ERROR: ERRLOG2_LOW = 0x0009020c
QTISECLIB [01f10895f]GEM_NOC ERROR: ERRLOG2_LOW = 0x0ae9020c
QTISECLIB [01f125ae1]CNOC2 ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f143be7]GEM_NOC ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f16153a]CNOC2 ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f17fe07]GEM_NOC ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f19cf89]CNOC2 ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1bb08e]GEM_NOC ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1d8a31]CNOC2 ERROR: SBM1 FAULTINSTATUS0_LOW = 0x00000002
QTISECLIB [01f1f72a4]GEM_NOC ERROR: SBM0 FAULTINSTATUS0_LOW = 0x00000001
QTISECLIB [01f21a217]CNOC3 ERROR: ERRLOG0_LOW = 0x00000006
QTISECLIB [01f23dfd3]NOC error fatal

changes in v2:
-- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch

Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488387/
Link: https://lore.kernel.org/r/1654538139-7450-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf

of_graph_get_remote_node() returns remote device node pointer with
refcount incremented, we should use of_node_put() on it
when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 86418f90a4c1 ("drm: convert drivers to use of_graph_get_remote_node")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488473/
Link: https://lore.kernel.org/r/20220607110841.53889-1-linmq006@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Don't overwrite hw fence in hw_init

Prior to the last commit, this could result in setting the GPU
written fence value back to an older value, if we had missed
updating completed_fence prior to suspend.  This was mostly
harmless as the GPU would eventually overwrite it again with
the correct value.  But we should just not do this.  Instead
just leave a sanity check that the fence looks plausible (in
case the GPU scribbled on memory).

Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 95d1deb02a9c ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/490138/
Link: https://lore.kernel.org/r/20220618161120.3451993-2-robdclark@gmail.com

drm/msm: Drop update_fences()

I noticed while looking at some traces, that we could miss calls to
msm_update_fence(), as the irq could have raced with retire_submits()
which could have already popped the last submit on a ring out of the
queue of in-flight submits.  But walking the list of submits in the
irq handler isn't really needed, as dma_fence_is_signaled() will dtrt.
So lets just drop it entirely.

v2: use spin_lock_irqsave/restore as we are no longer protected by the
    spin_lock_irqsave/restore() in update_fences()

Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 95d1deb02a9c ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/490136/
Link: https://lore.kernel.org/r/20220618161120.3451993-1-robdclark@gmail.com

drm/msm/gem: Drop early returns in close/purge vma

Keep the warn, but drop the early return.  If we do manage to hit this
sort of issue, skipping the cleanup just makes things worse (dangling
drm_mm_nodes when the msm_gem_vma is freed, etc).  Whereas the worst
that happens if we tear down a mapping the GPU is accessing is that we
get GPU iova faults, but otherwise the world keeps spinning.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reported-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/489115/
Link: https://lore.kernel.org/r/20220610172055.2337977-1-robdclark@gmail.com

drm/msm/gem: Separate object and vma unpin

Previously the BO_PINNED state in the submit was tracking two related
but different things: (1) that the buffer object was pinned, and (2)
that the vma (mapping within a set of pagetables) was pinned.  But with
fenced vma unpin (needed so that userspace couldn't race with retire
path for releasing a vma) these two were decoupled.  The fact that the
BO_PINNED flag was already cleared meant that we leaked the bo pin count
which should have been dropped when the submit was retired.

So split this state into BO_OBJ_PINNED and BO_VMA_PINNED, so they can be
dropped independently.

Fixes: 95d1deb02a9c ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/487559/
Link: https://lore.kernel.org/r/20220527172341.2151005-1-robdclark@gmail.com

drm/msm: use for_each_sgtable_sg to iterate over scatterlist

The dma_map_sgtable() call (used to invalidate cache) overwrites sgt->nents
with 1, so msm_iommu_pagetable_map maps only the first physical segment.

To fix this problem use for_each_sgtable_sg(), which uses orig_nents.

Fixes: b145c6e65eb0 ("drm/msm: Add support to create a local pagetable")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20220613221019.11399-1-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Switch ordering of runpm put vs devfreq_idle

In msm_devfreq_suspend() we cancel idle_work synchronously so that it
doesn't run after we power of the hw or in the resume path.  But this
means that we want to ensure that idle_work is not scheduled *after* we
no longer hold a runpm ref.  So switch the ordering of pm_runtime_put()
vs msm_devfreq_idle().

v2. Only move the runpm _put_autosuspend, and not the _mark_last_busy()

Fixes: 9bc95570175a ("drm/msm: Devfreq tuning")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210927152928.831245-1-robdclark@gmail.com
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220608161334.2140611-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

Linux 5.19-rc2

Merge tag 'platform-drivers-x86-v5.19-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Highlights:

   - Fix hp-wmi regression on HP Omen laptops introduced in 5.18

   - Several hardware-id additions

   - A couple of other tiny fixes"

* tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/intel: hid: Add Surface Go to VGBS allow list
  platform/x86: hp-wmi: Use zero insize parameter only when supported
  platform/x86: hp-wmi: Resolve WMI query failures on some devices
  platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF
  platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support
  platform/x86: barco-p50-gpio: Add check for platform_driver_register
  platform/x86/intel: pmc: Support Intel Raptorlake P
  platform/x86/intel: Fix pmt_crashlog array reference
  platform/mellanox: Add static in struct declaration.
  platform/mellanox: Spelling s/platfom/platform/

Merge tag 'wq-for-5.19-rc1-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fixes from Tejun Heo:
 "Tetsuo's patch to trigger build warnings if system-wide wq's are
  flushed along with a TP type update and trivial comment update"

* tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Switch to new kerneldoc syntax for named variable macro argument
  workqueue: Fix type of cpu in trace event
  workqueue: Wrap flush_workqueue() using a macro

Merge tag 'kbuild-fixes-v5.19' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Make the *.mod build rule portable for POSIX awk

 - Fix regression of 'make nsdeps'

 - Make scripts/check-local-export working for older bash versions

 - Fix scripts/gdb to extract the .config data from vmlinux

* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/gdb: change kernel config dumping method
  scripts/check-local-export: avoid 'wait $!' for process substitution
  scripts/nsdeps: adjust to the format change of *.mod files
  kbuild: avoid regex RS for POSIX awk

Merge tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs client fixes from Steve French:
 "Three reconnect fixes, all for stable as well.

  One of these three reconnect fixes does address a problem with
  multichannel reconnect, but this does not include the additional
  fix (still being tested) for dynamically detecting multichannel
  adapter changes which will improve those reconnect scenarios even
  more"

* tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: populate empty hostnames for extra channels
  cifs: return errors during session setup during reconnects
  cifs: fix reconnect on smb3 mount types

Merge tag 'random-5.19-rc2-for-linus' of git://git./linux/kernel/git/crng/random

Pull random number generator fixes from Jason Donenfeld:

 - A fix for a 5.19 regression for a case in which early device tree
   initializes the RNG, which flips a static branch.

   On most plaforms, jump labels aren't initialized until much later, so
   this caused splats. On a few mailing list threads, we cooked up easy
   fixes for arm64, arm32, and risc-v. But then things looked slightly
   more involved for xtensa, powerpc, arc, and mips. And at that point,
   when we're patching 7 architectures in a place before the console is
   even available, it seems like the cost/risk just wasn't worth it.

   So random.c works around it now by checking the already exported
   `static_key_initialized` boolean, as though somebody already ran into
   this issue in the past. I'm not super jazzed about that; it'd be
   prettier to not have to complicate downstream code. But I suppose
   it's practical.

 - A few small code nits and adding a missing __init annotation.

 - A change to the default config values to use the cpu and bootloader's
   seeds for initializing the RNG earlier.

   This brings them into line with what all the distros do (Fedora/RHEL,
   Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
   least), and moreover will now give us test coverage in various test
   beds that might have caught the above device tree bug earlier.

 - A change to WireGuard CI's configuration to increase test coverage
   around the RNG.

 - A documentation comment fix to unrelated maintainerless CRC code that
   I was asked to take, I guess because it has to do with polynomials
   (which the RNG thankfully no longer uses).

* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  wireguard: selftests: use maximum cpu features and allow rng seeding
  random: remove rng_has_arch_random()
  random: credit cpu and bootloader seeds by default
  random: do not use jump labels before they are initialized
  random: account for arch randomness in bits
  random: mark bootloader randomness code as __init
  random: avoid checking crng_ready() twice in random_init()
  crc-itu-t: fix typo in CRC ITU-T polynomial comment

platform/x86/intel: hid: Add Surface Go to VGBS allow list

The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be
added to dmi_vgbs_allow_list to enable tablet mode when an attached Type
Cover is folded back.

BugLink: https://github.com/linux-surface/linux-surface/issues/837
Signed-off-by: Duke Lee <krnhotwings@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220607213654.5567-1-krnhotwings@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: hp-wmi: Use zero insize parameter only when supported

commit be9d73e64957 ("platform/x86: hp-wmi: Fix 0x05 error code reported by
several WMI calls") and commit 12b19f14a21a ("platform/x86: hp-wmi: Fix
hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug):
Attempt to CreateField of length zero (20211217/dsopcode-133) because of
the ACPI method HWMC, which unconditionally creates a Field of
size (insize*8) bits:
CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
In cases where args->insize = 0, the Field size is 0, resulting in
an error.

Fix this by using zero insize only if 0x5 error code is returned

Tested on Omen 15 AMD (2020) board ID: 8786.

Fixes: be9d73e64957 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls")
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Tested-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: hp-wmi: Resolve WMI query failures on some devices

WMI queries fail on some devices where the ACPI method HWMC
unconditionally attempts to create Fields beyond the buffer
if the buffer is too small, this breaks essential features
such as power profiles:

         CreateByteField (Arg1, 0x10, D008)
         CreateByteField (Arg1, 0x11, D009)
         CreateByteField (Arg1, 0x12, D010)
         CreateDWordField (Arg1, 0x10, D032)
         CreateField (Arg1, 0x80, 0x0400, D128)

In cases where args->data had zero length, ACPI BIOS Error
(bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit
offset/length 128/8 exceeds size of target Buffer (128 bits)
(20211217/dsopcode-198) was obtained.

ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit
offset/length 136/8 exceeds size of target Buffer (136bits)
(20211217/dsopcode-198)

The original code created a buffer size of 128 bytes regardless if
the WMI call required a smaller buffer or not.  This particular
behavior occurs in older BIOS and reproduced in OMEN laptops.  Newer
BIOS handles buffer sizes properly and meets the latest specification
requirements.  This is the reason why testing with a dynamically
allocated buffer did not uncover any failures with the test systems at
hand.

This patch was tested on several OMEN, Elite, and Zbooks.  It was
confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN
Laptop 15-ek0xxx.  No problems were reported when testing on several Elite
and Zbooks notebooks.

Fixes: 4b4967cbd268 ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated")
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220608212923.8585-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>