Yunlong Song [Thu, 12 Jul 2018 15:09:26 +0000 (23:09 +0800)]
f2fs: do not set free of current section
[ Upstream commit
3611ce9911267cb93d364bd71ddea6821278d11f ]
For the case when sbi->segs_per_sec > 1, take section:segment = 5 for
example, if segment 1 is just used and allocate new segment 2, and the
blocks of segment 1 is invalidated, at this time, the previous code will
use __set_test_and_free to free the free_secmap and free_sections++,
this is not correct since it is still a current section, so fix it.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Vasilyev [Fri, 27 Jul 2018 13:39:31 +0000 (16:39 +0300)]
tty: rocket: Fix possible buffer overwrite on register_PCI
[ Upstream commit
0419056ec8fd01ddf5460d2dba0491aad22657dd ]
If number of isa and pci boards exceed NUM_BOARDS on the path
rp_init()->init_PCI()->register_PCI() then buffer overwrite occurs
in register_PCI() on assign rcktpt_io_addr[i].
The patch adds check on upper bound for index of registered
board in register_PCI.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 2 Aug 2018 08:24:47 +0000 (11:24 +0300)]
uio: potential double frees if __uio_register_device() fails
[ Upstream commit
f019f07ecf6a6b8bd6d7853bce70925d90af02d1 ]
The uio_unregister_device() function assumes that if "info->uio_dev" is
non-NULL that means "info" is fully allocated. Setting info->uio_de
has to be the last thing in the function.
In the current code, if request_threaded_irq() fails then we return with
info->uio_dev set to non-NULL but info is not fully allocated and it can
lead to double frees.
Fixes:
beafc54c4e2f ("UIO: Add the User IO core code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Vasilyev [Fri, 27 Jul 2018 15:45:36 +0000 (18:45 +0300)]
misc: ti-st: Fix memory leak in the error path of probe()
[ Upstream commit
81ae962d7f180c0092859440c82996cccb254976 ]
Free resources instead of direct return of the error code if kim_probe
fails.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gaurav Kohli [Thu, 2 Aug 2018 08:51:03 +0000 (14:21 +0530)]
timers: Clear timer_base::must_forward_clk with timer_base::lock held
[ Upstream commit
363e934d8811d799c88faffc5bfca782fd728334 ]
timer_base::must_forward_clock is indicating that the base clock might be
stale due to a long idle sleep.
The forwarding of the base clock takes place in the timer softirq or when a
timer is enqueued to a base which is idle. If the enqueue of timer to an
idle base happens from a remote CPU, then the following race can happen:
CPU0 CPU1
run_timer_softirq mod_timer
base = lock_timer_base(timer);
base->must_forward_clk = false
if (base->must_forward_clk)
forward(base); -> skipped
enqueue_timer(base, timer, idx);
-> idx is calculated high due to
stale base
unlock_timer_base(timer);
base = lock_timer_base(timer);
forward(base);
The root cause is that timer_base::must_forward_clk is cleared outside the
timer_base::lock held region, so the remote queuing CPU observes it as
cleared, but the base clock is still stale. This can cause large
granularity values for timers, i.e. the accuracy of the expiry time
suffers.
Prevent this by clearing the flag with timer_base::lock held, so that the
forwarding takes place before the cleared flag is observable by a remote
CPU.
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: linux-arm-msm@vger.kernel.org
Link: https://lkml.kernel.org/r/1533199863-22748-1-git-send-email-gkohli@codeaurora.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BingJing Chang [Wed, 1 Aug 2018 09:08:36 +0000 (17:08 +0800)]
md/raid5: fix data corruption of replacements after originals dropped
[ Upstream commit
d63e2fc804c46e50eee825c5d3a7228e07048b47 ]
During raid5 replacement, the stripes can be marked with R5_NeedReplace
flag. Data can be read from being-replaced devices and written to
replacing spares without reading all other devices. (It's 'replace'
mode. s.replacing = 1) If a being-replaced device is dropped, the
replacement progress will be interrupted and resumed with pure recovery
mode. However, existing stripes before being interrupted cannot read
from the dropped device anymore. It prints lots of WARN_ON messages.
And it results in data corruption because existing stripes write
problematic data into its replacement device and update the progress.
\# Erase disks (1MB + 2GB)
dd if=/dev/zero of=/dev/sda bs=1MB count=2049
dd if=/dev/zero of=/dev/sdb bs=1MB count=2049
dd if=/dev/zero of=/dev/sdc bs=1MB count=2049
dd if=/dev/zero of=/dev/sdd bs=1MB count=2049
mdadm -C /dev/md0 -amd -R -l5 -n3 -x0 /dev/sd[abc] -z 2097152
\# Ensure array stores non-zero data
dd if=/root/data_4GB.iso of=/dev/md0 bs=1MB
\# Start replacement
mdadm /dev/md0 -a /dev/sdd
mdadm /dev/md0 --replace /dev/sda
Then, Hot-plug out /dev/sda during recovery, and wait for recovery done.
echo check > /sys/block/md0/md/sync_action
cat /sys/block/md0/md/mismatch_cnt # it will be greater than 0.
Soon after you hot-plug out /dev/sda, you will see many WARN_ON
messages. The replacement recovery will be interrupted shortly. After
the recovery finishes, it will result in data corruption.
Actually, it's just an unhandled case of replacement. In commit
<
f94c0b6658c7> (md/raid5: fix interaction of 'replace' and 'recovery'.),
if a NeedReplace device is not UPTODATE then that is an error, the
commit just simply print WARN_ON but also mark these corrupted stripes
with R5_WantReplace. (it means it's ready for writes.)
To fix this case, we can leverage 'sync and replace' mode mentioned in
commit <
9a3e1101b827> (md/raid5: detect and handle replacements during
recovery.). We can add logics to detect and use 'sync and replace' mode
for these stripes.
Reported-by: Alex Chen <alexchen@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Christie [Thu, 2 Aug 2018 17:12:20 +0000 (12:12 -0500)]
scsi: target: fix __transport_register_session locking
[ Upstream commit
6a64f6e1591322beb8ce16e952a53582caf2a15c ]
When __transport_register_session is called from transport_register_session
irqs will already have been disabled, so we do not want the unlock irq call
to enable them until the higher level has done the final
spin_unlock_irqrestore/ spin_unlock_irq.
This has __transport_register_session use the save/restore call.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arun Parameswaran [Thu, 2 Aug 2018 00:53:47 +0000 (17:53 -0700)]
net: phy: Fix the register offsets in Broadcom iProc mdio mux driver
[ Upstream commit
77fefa93bfebe4df44f154f2aa5938e32630d0bf ]
Modify the register offsets in the Broadcom iProc mdio mux to start
from the top of the register address space.
Earlier, the base address pointed to the end of the block's register
space. The base address will now point to the start of the mdio's
address space. The offsets have been fixed to match this.
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Thu, 2 Aug 2018 11:11:44 +0000 (14:11 +0300)]
gpio: tegra: Move driver registration to subsys_init level
[ Upstream commit
40b25bce0adbe641a744d1291bc0e51fb7f3c3d8 ]
There is a bug in regards to deferred probing within the drivers core
that causes GPIO-driver to suspend after its users. The bug appears if
GPIO-driver probe is getting deferred, which happens after introducing
dependency on PINCTRL-driver for the GPIO-driver by defining "gpio-ranges"
property in device-tree. The bug in the drivers core is old (more than 4
years now) and is well known, unfortunately there is no easy fix for it.
The good news is that we can workaround the deferred probe issue by
changing GPIO / PINCTRL drivers registration order and hence by moving
PINCTRL driver registration to the arch_init level and GPIO to the
subsys_init.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hedberg [Sat, 4 Aug 2018 20:40:26 +0000 (23:40 +0300)]
Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV
[ Upstream commit
6c3711ec64fd23a9abc8aaf59a9429569a6282df ]
This driver was recently updated to use serdev, so add the appropriate
dependency. Without this one can get compiler warnings like this if
CONFIG_SERIAL_DEV_BUS is not enabled:
CC [M] drivers/bluetooth/hci_h5.o
drivers/bluetooth/hci_h5.c:934:36: warning: ‘h5_serdev_driver’ defined but not used [-Wunused-variable]
static struct serdev_device_driver h5_serdev_driver = {
^~~~~~~~~~~~~~~~
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Sat, 4 Aug 2018 21:20:40 +0000 (14:20 -0700)]
ethtool: Remove trailing semicolon for static inline
[ Upstream commit
d89d41556141a527030a15233135ba622ba3350d ]
Android's header sanitization tool chokes on static inline functions having a
trailing semicolon, leading to an incorrectly parsed header file. While the
tool should obviously be fixed, also fix the header files for the two affected
functions: ethtool_get_flow_spec_ring() and ethtool_get_flow_spec_ring_vf().
Fixes:
8cf6f497de40 ("ethtool: Add helper routines to pass vf to rx_flow_spec")
Reporetd-by: Blair Prescott <blair.prescott@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 2 Aug 2018 08:42:22 +0000 (11:42 +0300)]
misc: mic: SCIF Fix scif_get_new_port() error handling
[ Upstream commit
a39284ae9d2ad09975c8ae33f1bd0f05fbfbf6ee ]
There are only 2 callers of scif_get_new_port() and both appear to get
the error handling wrong. Both treat zero returns as error, but it
actually returns negative error codes and >= 0 on success.
Fixes:
e9089f43c9a7 ("misc: mic: SCIF open close bind and listen APIs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Brodkin [Thu, 2 Aug 2018 08:50:16 +0000 (11:50 +0300)]
ARC: [plat-axs*]: Enable SWAP
commit
c83532fb0fe053d2e43e9387354cb1b52ba26427 upstream.
SWAP support on ARC was fixed earlier by
commit
6e3761145a9b ("ARC: Fix CONFIG_SWAP")
so now we may safely enable it on platforms that
have external media like USB and SD-card.
Note: it was already allowed for HSDK
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: stable@vger.kernel.org # 6e3761145a9b: ARC: Fix CONFIG_SWAP
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Weiner [Wed, 3 May 2017 21:51:57 +0000 (14:51 -0700)]
mm: remove seemingly spurious reclaimability check from laptop_mode gating
commit
047d72c30eedcb953222810f1e7dcaae663aa452 upstream.
Commit
1d82de618ddd ("mm, vmscan: make kswapd reclaim in terms of
nodes") allowed laptop_mode=1 to start writing not just when the
priority drops to DEF_PRIORITY - 2 but also when the node is
unreclaimable.
That appears to be a spurious change in this patch as I doubt the series
was tested with laptop_mode, and neither is that particular change
mentioned in the changelog. Remove it, it's still recent.
Link: http://lkml.kernel.org/r/20170228214007.5621-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mel Gorman [Fri, 24 Feb 2017 22:59:07 +0000 (14:59 -0800)]
mm, vmscan: clear PGDAT_WRITEBACK when zone is balanced
commit
c2f83143f1c67d186520b72b6cefbf0aa07a34ee upstream.
Hillf Danton pointed out that since commit
1d82de618dd ("mm, vmscan:
make kswapd reclaim in terms of nodes") that PGDAT_WRITEBACK is no
longer cleared.
It was not noticed as triggering it requires pages under writeback to
cycle twice through the LRU and before kswapd gets stalled.
Historically, such issues tended to occur on small machines writing
heavily to slow storage such as a USB stick.
Once kswapd stalls, direct reclaim stalls may be higher but due to the
fact that memory pressure is required, it would not be very noticable.
Michal Hocko suggested removing the flag entirely but the conservative
fix is to restore the intended PGDAT_WRITEBACK behaviour and clear the
flag when a suitable zone is balanced.
Fixes:
1d82de618ddd ("mm, vmscan: make kswapd reclaim in terms of nodes")
Link: http://lkml.kernel.org/r/20170203203222.gq7hk66yc36lpgtb@suse.de
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prateek Sood [Fri, 14 Jul 2017 13:47:56 +0000 (19:17 +0530)]
locking/osq_lock: Fix osq_lock queue corruption
commit
50972fe78f24f1cd0b9d7bbf1f87d2be9e4f412e upstream.
Fix ordering of link creation between node->prev and prev->next in
osq_lock(). A case in which the status of optimistic spin queue is
CPU6->CPU2 in which CPU6 has acquired the lock.
tail
v
,-. <- ,-.
|6| |2|
`-' -> `-'
At this point if CPU0 comes in to acquire osq_lock, it will update the
tail count.
CPU2 CPU0
----------------------------------
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' -> `-' `-'
After tail count update if CPU2 starts to unqueue itself from
optimistic spin queue, it will find an updated tail count with CPU0 and
update CPU2 node->next to NULL in osq_wait_next().
unqueue-A
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' `-'
unqueue-B
->tail != curr && !node->next
If reordering of following stores happen then prev->next where prev
being CPU2 would be updated to point to CPU0 node:
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' -> `-'
osq_wait_next()
node->next <- 0
xchg(node->next, NULL)
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' `-'
unqueue-C
At this point if next instruction
WRITE_ONCE(next->prev, prev);
in CPU2 path is committed before the update of CPU0 node->prev = prev then
CPU0 node->prev will point to CPU6 node.
tail
v----------. v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' `-'
`----------^
At this point if CPU0 path's node->prev = prev is committed resulting
in change of CPU0 prev back to CPU2 node. CPU2 node->next is NULL
currently,
tail
v
,-. <- ,-. <- ,-.
|6| |2| |0|
`-' `-' `-'
`----------^
so if CPU0 gets into unqueue path of osq_lock it will keep spinning
in infinite loop as condition prev->next == node will never be true.
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
[ Added pictures, rewrote comments. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: sramana@codeaurora.org
Link: http://lkml.kernel.org/r/1500040076-27626-1-git-send-email-prsood@codeaurora.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Hocko [Thu, 3 Aug 2017 08:11:52 +0000 (10:11 +0200)]
selinux: use GFP_NOWAIT in the AVC kmem_caches
commit
476accbe2f6ef69caeebe99f52a286e12ac35aee upstream.
There is a strange __GFP_NOMEMALLOC usage pattern in SELinux,
specifically GFP_ATOMIC | __GFP_NOMEMALLOC which doesn't make much
sense. GFP_ATOMIC on its own allows to access memory reserves while
__GFP_NOMEMALLOC dictates we cannot use memory reserves. Replace this
with the much more sane GFP_NOWAIT in the AVC code as we can tolerate
memory allocation failures in that code.
Signed-off-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prateek Sood [Thu, 7 Sep 2017 14:30:58 +0000 (20:00 +0530)]
locking/rwsem-xadd: Fix missed wakeup due to reordering of load
commit
9c29c31830a4eca724e137a9339137204bbb31be upstream.
If a spinner is present, there is a chance that the load of
rwsem_has_spinner() in rwsem_wake() can be reordered with
respect to decrement of rwsem count in __up_write() leading
to wakeup being missed:
spinning writer up_write caller
--------------- -----------------------
[S] osq_unlock() [L] osq
spin_lock(wait_lock)
sem->count=0xFFFFFFFF00000001
+0xFFFFFFFF00000000
count=sem->count
MB
sem->count=0xFFFFFFFE00000001
-0xFFFFFFFF00000001
spin_trylock(wait_lock)
return
rwsem_try_write_lock(count)
spin_unlock(wait_lock)
schedule()
Reordering of atomic_long_sub_return_release() in __up_write()
and rwsem_has_spinner() in rwsem_wake() can cause missing of
wakeup in up_write() context. In spinning writer, sem->count
and local variable count is 0XFFFFFFFE00000001. It would result
in rwsem_try_write_lock() failing to acquire rwsem and spinning
writer going to sleep in rwsem_down_write_failed().
The smp_rmb() will make sure that the spinner state is
consulted after sem->count is updated in up_write context.
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: longman@redhat.com
Cc: parri.andrea@gmail.com
Cc: sramana@codeaurora.org
Link: http://lkml.kernel.org/r/1504794658-15397-1-git-send-email-prsood@codeaurora.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Mon, 18 Sep 2017 20:46:36 +0000 (22:46 +0200)]
nl80211: fix null-ptr dereference on invalid mesh configuration
commit
265698d7e6132a2d41471135534f4f36ad15b09c upstream.
If TX rates are specified during mesh join, the channel must
also be specified. Check the channel pointer to avoid a null
pointer dereference if it isn't.
Reported-by: Jouni Malinen <j@w1.fi>
Fixes:
8564e38206de ("cfg80211: add checks for beacon rate, extend to mesh")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo [Mon, 21 Nov 2016 23:03:32 +0000 (18:03 -0500)]
block,blkcg: use __GFP_NOWARN for best-effort allocations in blkcg
commit
e00f4f4d0ff7e13b9115428a245b49108d625f09 upstream.
blkcg allocates some per-cgroup data structures with GFP_NOWAIT and
when that fails falls back to operations which aren't specific to the
cgroup. Occassional failures are expected under pressure and falling
back to non-cgroup operation is the right thing to do.
Unfortunately, I forgot to add __GFP_NOWARN to these allocations and
these expected failures end up creating a lot of noise. Add
__GFP_NOWARN.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Marc MERLIN <marc@merlins.org>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Wed, 12 Jul 2017 21:36:01 +0000 (14:36 -0700)]
IB/rxe: do not copy extra stack memory to skb
commit
4c93496f18ce5044d78e4f7f9e018682a4f44b3d upstream.
This fixes a over-read condition detected by FORTIFY_SOURCE for this
line:
memcpy(SKB_TO_PKT(skb), &ack_pkt, sizeof(skb->cb));
The error was:
In file included from ./include/linux/bitmap.h:8:0,
from ./include/linux/cpumask.h:11,
from ./include/linux/mm_types_task.h:13,
from ./include/linux/mm_types.h:4,
from ./include/linux/kmemcheck.h:4,
from ./include/linux/skbuff.h:18,
from drivers/infiniband/sw/rxe/rxe_resp.c:34:
In function 'memcpy',
inlined from 'send_atomic_ack.constprop' at drivers/infiniband/sw/rxe/rxe_resp.c:998:2,
inlined from 'acknowledge' at drivers/infiniband/sw/rxe/rxe_resp.c:1026:3,
inlined from 'rxe_responder' at drivers/infiniband/sw/rxe/rxe_resp.c:1286:10:
./include/linux/string.h:309:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
__read_overflow2();
Daniel Micay noted that struct rxe_pkt_info is 32 bytes on 32-bit
architectures, but skb->cb is still 64. The memcpy() over-reads 32
bytes. This fixes it by zeroing the unused bytes in skb->cb.
Link: http://lkml.kernel.org/r/1497903987-21002-5-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Moni Shoua <monis@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Micay [Tue, 6 Jun 2017 04:52:34 +0000 (21:52 -0700)]
staging/rts5208: Fix read overflow in memcpy
commit
88a5b39b69ab1828fd4130e2baadd184109cea69 upstream.
Noticed by FORTIFY_SOURCE, this swaps memcpy() for strncpy() to zero-value
fill the end of the buffer instead of over-reading a string from .rodata.
Signed-off-by: Daniel Micay <danielmicay@gmail.com>
[kees: wrote commit log]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Wayne Porter <wporter82@gmail.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Jia-Ju Bai [Mon, 5 Jun 2017 07:30:16 +0000 (15:30 +0800)]
staging: rt5208: Fix a sleep-in-atomic bug in xd_copy_page
commit
498c4b4e9c23855d17ecc2a108d949bb68020481 upstream.
The driver may sleep under a spin lock, and the function call path is:
rtsx_exclusive_enter_ss (acquire the lock by spin_lock)
rtsx_enter_ss
rtsx_power_off_card
xd_cleanup_work
xd_delay_write
xd_finish_write
xd_copy_page
wait_timeout
schedule_timeout --> may sleep
To fix it, "wait_timeout" is replaced with mdelay in xd_copy_page.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vegard Nossum [Mon, 29 May 2017 07:22:07 +0000 (09:22 +0200)]
kthread: fix boot hang (regression) on MIPS/OpenRISC
commit
b0f5a8f32e8bbdaae1abb8abe2d3cbafaba57e08 upstream.
This fixes a regression in commit
4d6501dce079 where I didn't notice
that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to
NULL after our initialisation in copy_process().
We can simply get rid of the arch-specific initialisation here since it
is now always done in copy_process() before hitting copy_thread{,_tls}().
Review notes:
- As far as I can tell, copy_process() is the only user of
copy_thread_tls(), which is the only caller of copy_thread() for
architectures that don't implement copy_thread_tls().
- After this patch, there is no arch-specific code touching
p->set_child_tid or p->clear_child_tid whatsoever.
- It may look like MIPS/OpenRISC wanted to always have these fields be
NULL, but that's not true, as copy_process() would unconditionally
set them again _after_ calling copy_thread_tls() before commit
4d6501dce079.
Fixes:
4d6501dce079c1eb6bf0b1d8f528a5e81770109e ("kthread: Fix use-after-free if kthread fork fails")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Jamie Iles <jamie.iles@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vegard Nossum [Tue, 9 May 2017 07:39:59 +0000 (09:39 +0200)]
kthread: Fix use-after-free if kthread fork fails
commit
4d6501dce079c1eb6bf0b1d8f528a5e81770109e upstream.
If a kthread forks (e.g. usermodehelper since commit
1da5c46fa965) but
fails in copy_process() between calling dup_task_struct() and setting
p->set_child_tid, then the value of p->set_child_tid will be inherited
from the parent and get prematurely freed by free_kthread_struct().
kthread()
- worker_thread()
- process_one_work()
| - call_usermodehelper_exec_work()
| - kernel_thread()
| - _do_fork()
| - copy_process()
| - dup_task_struct()
| - arch_dup_task_struct()
| - tsk->set_child_tid = current->set_child_tid // implied
| - ...
| - goto bad_fork_*
| - ...
| - free_task(tsk)
| - free_kthread_struct(tsk)
| - kfree(tsk->set_child_tid)
- ...
- schedule()
- __schedule()
- wq_worker_sleeping()
- kthread_data(task)->flags // UAF
The problem started showing up with commit
1da5c46fa965 since it reused
->set_child_tid for the kthread worker data.
A better long-term solution might be to get rid of the ->set_child_tid
abuse. The comment in set_kthread_struct() also looks slightly wrong.
Debugged-by: Jamie Iles <jamie.iles@oracle.com>
Fixes:
1da5c46fa965 ("kthread: Make struct kthread kmalloc'ed")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jamie Iles <jamie.iles@oracle.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170509073959.17858-1-vegard.nossum@oracle.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ritesh Harjani [Wed, 9 Aug 2017 12:58:32 +0000 (18:28 +0530)]
cfq: Give a chance for arming slice idle timer in case of group_idle
commit
b3193bc0dca9bb69c8ba1ec1a318105c76eb4172 upstream.
In below scenario blkio cgroup does not work as per their assigned
weights :-
1. When the underlying device is nonrotational with a single HW queue
with depth of >= CFQ_HW_QUEUE_MIN
2. When the use case is forming two blkio cgroups cg1(weight 1000) &
cg2(wight 100) and two processes(file1 and file2) doing sync IO in
their respective blkio cgroups.
For above usecase result of fio (without this patch):-
file1: (groupid=0, jobs=1): err= 0: pid=685: Thu Jan 1 19:41:49 1970
write: IOPS=1315, BW=41.1MiB/s (43.1MB/s)(1024MiB/24906msec)
<...>
file2: (groupid=0, jobs=1): err= 0: pid=686: Thu Jan 1 19:41:49 1970
write: IOPS=1295, BW=40.5MiB/s (42.5MB/s)(1024MiB/25293msec)
<...>
// both the process BW is equal even though they belong to diff.
cgroups with weight of 1000(cg1) and 100(cg2)
In above case (for non rotational NCQ devices),
as soon as the request from cg1 is completed and even
though it is provided with higher set_slice=10, because of CFQ
algorithm when the driver tries to fetch the request, CFQ expires
this group without providing any idle time nor weight priority
and schedules another cfq group (in this case cg2).
And thus both cfq groups(cg1 & cg2) keep alternating to get the
disk time and hence loses the cgroup weight based scheduling.
Below patch gives a chance to cfq algorithm (cfq_arm_slice_timer)
to arm the slice timer in case group_idle is enabled.
In case if group_idle is also not required (including for nonrotational
NCQ drives), we need to explicitly set group_idle = 0 from sysfs for
such cases.
With this patch result of fio(for above usecase) :-
file1: (groupid=0, jobs=1): err= 0: pid=690: Thu Jan 1 00:06:08 1970
write: IOPS=1706, BW=53.3MiB/s (55.9MB/s)(1024MiB/19197msec)
<..>
file2: (groupid=0, jobs=1): err= 0: pid=691: Thu Jan 1 00:06:08 1970
write: IOPS=1043, BW=32.6MiB/s (34.2MB/s)(1024MiB/31401msec)
<..>
// In this processes BW is as per their respective cgroups weight.
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 30 Aug 2018 13:13:16 +0000 (15:13 +0200)]
ALSA: hda - Fix cancel_work_sync() stall from jackpoll work
commit
16037643969e095509cd8446a3f8e406a6dc3a2c upstream.
On AMD/ATI controllers, the HD-audio controller driver allows a bus
reset upon the error recovery, and its procedure includes the
cancellation of pending jack polling work as found in
snd_hda_bus_codec_reset(). This works usually fine, but it becomes a
problem when the reset happens from the jack poll work itself; then
calling cancel_work_sync() from the work being processed tries to wait
the finish endlessly.
As a workaround, this patch adds the check of current_work() and
applies the cancel_work_sync() only when it's not from the
jackpoll_work.
This doesn't fix the root cause of the reported error below, but at
least, it eases the unexpected stall of the whole system.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937
Cc: <stable@vger.kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pierre Morel [Thu, 23 Aug 2018 10:25:54 +0000 (12:25 +0200)]
KVM: s390: vsie: copy wrapping keys to right place
commit
204c97245612b6c255edf4e21e24d417c4a0c008 upstream.
Copy the key mask to the right offset inside the shadow CRYCB
Fixes:
bbeaa58b3 ("KVM: s390: vsie: support aes dea wrapping keys")
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Cc: stable@vger.kernel.org # v4.8+
Message-Id: <
1535019956-23539-2-git-send-email-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Mon, 3 Sep 2018 08:24:57 +0000 (11:24 +0300)]
i2c: i801: fix DNV's SMBCTRL register offset
commit
851a15114895c5bce163a6f2d57e0aa4658a1be4 upstream.
DNV's iTCO is slightly different with SMBCTRL sitting at a different
offset when compared to all other devices. Let's fix so that we can
properly use iTCO watchdog.
Fixes:
84d7f2ebd70d ("i2c: i801: Add support for Intel DNV")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shubhrajyoti Datta [Mon, 3 Sep 2018 09:41:11 +0000 (15:11 +0530)]
i2c: xiic: Make the start and the byte count write atomic
commit
ae7304c3ea28a3ba47a7a8312c76c654ef24967e upstream.
Disable interrupts while configuring the transfer and enable them back.
We have below as the programming sequence
1. start and slave address
2. byte count and stop
In some customer platform there was a lot of interrupts between 1 and 2
and after slave address (around 7 clock cyles) if 2 is not executed
then the transaction is nacked.
To fix this case make the 2 writes atomic.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[wsa: added a newline for better readability]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 15 Sep 2018 07:43:07 +0000 (09:43 +0200)]
Linux 4.9.127
Suzuki K Poulose [Wed, 4 Jul 2018 22:07:46 +0000 (23:07 +0100)]
arm64: Handle mismatched cache type
commit
314d53d297980676011e6fd83dac60db4a01dc70 upstream.
Track mismatches in the cache type register (CTR_EL0), other
than the D/I min line sizes and trap user accesses if there are any.
Fixes:
be68a8aaf925 ("arm64: cpufeature: Fix CTR_EL0 field definitions")
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Wed, 4 Jul 2018 22:07:45 +0000 (23:07 +0100)]
arm64: Fix mismatched cache line size detection
commit
4c4a39dd5fe2d13e2d2fa5fceb8ef95d19fc389a upstream.
If there is a mismatch in the I/D min line size, we must
always use the system wide safe value both in applications
and in the kernel, while performing cache operations. However,
we have been checking more bits than just the min line sizes,
which triggers false negatives. We may need to trap the user
accesses in such cases, but not necessarily patch the kernel.
This patch fixes the check to do the right thing as advertised.
A new capability will be added to check mismatches in other
fields and ensure we trap the CTR accesses.
Fixes:
be68a8aaf925 ("arm64: cpufeature: Fix CTR_EL0 field definitions")
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ethan Lien [Mon, 2 Jul 2018 07:44:58 +0000 (15:44 +0800)]
btrfs: use correct compare function of dirty_metadata_bytes
commit
d814a49198eafa6163698bdd93961302f3a877a4 upstream.
We use customized, nodesize batch value to update dirty_metadata_bytes.
We should also use batch version of compare function or we will easily
goto fast path and get false result from percpu_counter_compare().
Fixes:
e2d845211eda ("Btrfs: use percpu counter for dirty metadata count")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
nb: Rebased on 4.4.y ]
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Mon, 6 Aug 2018 12:14:51 +0000 (07:14 -0500)]
ASoC: wm8994: Fix missing break in switch
commit
ad0eaee6195db1db1749dd46b9e6f4466793d178 upstream.
Add missing break statement in order to prevent the code from falling
through to the default case.
Addresses-Coverity-ID: 115050 ("Missing break in switch")
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
[Gustavo: Backported to 3.16..4.18 - Remove code comment removal]
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Schwidefsky [Mon, 6 Aug 2018 11:49:47 +0000 (13:49 +0200)]
s390/lib: use expoline for all bcr instructions
commit
5eda25b10297684c1f46a14199ec00210f3c346e upstream.
The memove, memset, memcpy, __memset16, __memset32 and __memset64
function have an additional indirect return branch in form of a
"bzr" instruction. These need to use expolines as well.
Cc: <stable@vger.kernel.org> # v4.17+
Fixes:
97489e0663 ("s390/lib: use expoline for indirect branches")
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Winkler [Tue, 2 Jan 2018 10:01:41 +0000 (12:01 +0200)]
mei: me: allow runtime pm for platform with D0i3
commit
cc365dcf0e56271bedf3de95f88922abe248e951 upstream.
>From the pci power documentation:
"The driver itself should not call pm_runtime_allow(), though. Instead,
it should let user space or some platform-specific code do that (user space
can do it via sysfs as stated above)..."
However, the S0ix residency cannot be reached without MEI device getting
into low power state. Hence, for mei devices that support D0i3, it's better
to make runtime power management mandatory and not rely on the system
integration such as udev rules.
This policy cannot be applied globally as some older platforms
were found to have broken power management.
Cc: <stable@vger.kernel.org> v4.13+
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Aleksandrov [Wed, 30 Aug 2017 09:49:05 +0000 (12:49 +0300)]
sch_tbf: fix two null pointer dereferences on init failure
commit
c2d6511e6a4f1f3673d711569c00c3849549e9b0 upstream.
sch_tbf calls qdisc_watchdog_cancel() in both its ->reset and ->destroy
callbacks but it may fail before the timer is initialized due to missing
options (either not supplied by user-space or set as a default qdisc),
also q->qdisc is used by ->reset and ->destroy so we need it initialized.
Reproduce:
$ sysctl net.core.default_qdisc=tbf
$ ip l set ethX up
Crash log:
[ 959.160172] BUG: unable to handle kernel NULL pointer dereference at
0000000000000018
[ 959.160323] IP: qdisc_reset+0xa/0x5c
[ 959.160400] PGD
59cdb067
[ 959.160401] P4D
59cdb067
[ 959.160466] PUD
59ccb067
[ 959.160532] PMD 0
[ 959.160597]
[ 959.160706] Oops: 0000 [#1] SMP
[ 959.160778] Modules linked in: sch_tbf sch_sfb sch_prio sch_netem
[ 959.160891] CPU: 2 PID: 1562 Comm: ip Not tainted 4.13.0-rc6+ #62
[ 959.160998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 959.161157] task:
ffff880059c9a700 task.stack:
ffff8800376d0000
[ 959.161263] RIP: 0010:qdisc_reset+0xa/0x5c
[ 959.161347] RSP: 0018:
ffff8800376d3610 EFLAGS:
00010286
[ 959.161531] RAX:
ffffffffa001b1dd RBX:
ffff8800373a2800 RCX:
0000000000000000
[ 959.161733] RDX:
ffffffff8215f160 RSI:
ffffffff8215f160 RDI:
0000000000000000
[ 959.161939] RBP:
ffff8800376d3618 R08:
00000000014080c0 R09:
00000000ffffffff
[ 959.162141] R10:
ffff8800376d3578 R11:
0000000000000020 R12:
ffffffffa001d2c0
[ 959.162343] R13:
ffff880037538000 R14:
00000000ffffffff R15:
0000000000000001
[ 959.162546] FS:
00007fcc5126b740(0000) GS:
ffff88005d900000(0000) knlGS:
0000000000000000
[ 959.162844] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 959.163030] CR2:
0000000000000018 CR3:
000000005abc4000 CR4:
00000000000406e0
[ 959.163233] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 959.163436] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 959.163638] Call Trace:
[ 959.163788] tbf_reset+0x19/0x64 [sch_tbf]
[ 959.163957] qdisc_destroy+0x8b/0xe5
[ 959.164119] qdisc_create_dflt+0x86/0x94
[ 959.164284] ? dev_activate+0x129/0x129
[ 959.164449] attach_one_default_qdisc+0x36/0x63
[ 959.164623] netdev_for_each_tx_queue+0x3d/0x48
[ 959.164795] dev_activate+0x4b/0x129
[ 959.164957] __dev_open+0xe7/0x104
[ 959.165118] __dev_change_flags+0xc6/0x15c
[ 959.165287] dev_change_flags+0x25/0x59
[ 959.165451] do_setlink+0x30c/0xb3f
[ 959.165613] ? check_chain_key+0xb0/0xfd
[ 959.165782] rtnl_newlink+0x3a4/0x729
[ 959.165947] ? rtnl_newlink+0x117/0x729
[ 959.166121] ? ns_capable_common+0xd/0xb1
[ 959.166288] ? ns_capable+0x13/0x15
[ 959.166450] rtnetlink_rcv_msg+0x188/0x197
[ 959.166617] ? rcu_read_unlock+0x3e/0x5f
[ 959.166783] ? rtnl_newlink+0x729/0x729
[ 959.166948] netlink_rcv_skb+0x6c/0xce
[ 959.167113] rtnetlink_rcv+0x23/0x2a
[ 959.167273] netlink_unicast+0x103/0x181
[ 959.167439] netlink_sendmsg+0x326/0x337
[ 959.167607] sock_sendmsg_nosec+0x14/0x3f
[ 959.167772] sock_sendmsg+0x29/0x2e
[ 959.167932] ___sys_sendmsg+0x209/0x28b
[ 959.168098] ? do_raw_spin_unlock+0xcd/0xf8
[ 959.168267] ? _raw_spin_unlock+0x27/0x31
[ 959.168432] ? __handle_mm_fault+0x651/0xdb1
[ 959.168602] ? check_chain_key+0xb0/0xfd
[ 959.168773] __sys_sendmsg+0x45/0x63
[ 959.168934] ? __sys_sendmsg+0x45/0x63
[ 959.169100] SyS_sendmsg+0x19/0x1b
[ 959.169260] entry_SYSCALL_64_fastpath+0x23/0xc2
[ 959.169432] RIP: 0033:0x7fcc5097e690
[ 959.169592] RSP: 002b:
00007ffd0d5c7b48 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 959.169887] RAX:
ffffffffffffffda RBX:
ffffffff810d278c RCX:
00007fcc5097e690
[ 959.170089] RDX:
0000000000000000 RSI:
00007ffd0d5c7b90 RDI:
0000000000000003
[ 959.170292] RBP:
ffff8800376d3f98 R08:
0000000000000001 R09:
0000000000000003
[ 959.170494] R10:
00007ffd0d5c7910 R11:
0000000000000246 R12:
0000000000000006
[ 959.170697] R13:
000000000066f1a0 R14:
00007ffd0d5cfc40 R15:
0000000000000000
[ 959.170900] ? trace_hardirqs_off_caller+0xa7/0xcf
[ 959.171076] Code: 00 41 c7 84 24 14 01 00 00 00 00 00 00 41 c7 84 24
98 00 00 00 00 00 00 00 41 5c 41 5d 41 5e 5d c3 66 66 66 66 90 55 48 89
e5 53 <48> 8b 47 18 48 89 fb 48 8b 40 48 48 85 c0 74 02 ff d0 48 8b bb
[ 959.171637] RIP: qdisc_reset+0xa/0x5c RSP:
ffff8800376d3610
[ 959.171821] CR2:
0000000000000018
Fixes:
87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Fixes:
0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Aleksandrov [Wed, 30 Aug 2017 09:49:03 +0000 (12:49 +0300)]
sch_netem: avoid null pointer deref on init failure
commit
634576a1844dba15bc5e6fc61d72f37e13a21615 upstream.
netem can fail in ->init due to missing options (either not supplied by
user-space or used as a default qdisc) causing a timer->base null
pointer deref in its ->destroy() and ->reset() callbacks.
Reproduce:
$ sysctl net.core.default_qdisc=netem
$ ip l set ethX up
Crash log:
[ 1814.846943] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 1814.847181] IP: hrtimer_active+0x17/0x8a
[ 1814.847270] PGD
59c34067
[ 1814.847271] P4D
59c34067
[ 1814.847337] PUD
37374067
[ 1814.847403] PMD 0
[ 1814.847468]
[ 1814.847582] Oops: 0000 [#1] SMP
[ 1814.847655] Modules linked in: sch_netem(O) sch_fq_codel(O)
[ 1814.847761] CPU: 3 PID: 1573 Comm: ip Tainted: G O 4.13.0-rc6+ #62
[ 1814.847884] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 1814.848043] task:
ffff88003723a700 task.stack:
ffff88005adc8000
[ 1814.848235] RIP: 0010:hrtimer_active+0x17/0x8a
[ 1814.848407] RSP: 0018:
ffff88005adcb590 EFLAGS:
00010246
[ 1814.848590] RAX:
0000000000000000 RBX:
ffff880058e359d8 RCX:
0000000000000000
[ 1814.848793] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff880058e359d8
[ 1814.848998] RBP:
ffff88005adcb5b0 R08:
00000000014080c0 R09:
00000000ffffffff
[ 1814.849204] R10:
ffff88005adcb660 R11:
0000000000000020 R12:
0000000000000000
[ 1814.849410] R13:
ffff880058e359d8 R14:
00000000ffffffff R15:
0000000000000001
[ 1814.849616] FS:
00007f733bbca740(0000) GS:
ffff88005d980000(0000) knlGS:
0000000000000000
[ 1814.849919] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1814.850107] CR2:
0000000000000000 CR3:
0000000059f0d000 CR4:
00000000000406e0
[ 1814.850313] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 1814.850518] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 1814.850723] Call Trace:
[ 1814.850875] hrtimer_try_to_cancel+0x1a/0x93
[ 1814.851047] hrtimer_cancel+0x15/0x20
[ 1814.851211] qdisc_watchdog_cancel+0x12/0x14
[ 1814.851383] netem_reset+0xe6/0xed [sch_netem]
[ 1814.851561] qdisc_destroy+0x8b/0xe5
[ 1814.851723] qdisc_create_dflt+0x86/0x94
[ 1814.851890] ? dev_activate+0x129/0x129
[ 1814.852057] attach_one_default_qdisc+0x36/0x63
[ 1814.852232] netdev_for_each_tx_queue+0x3d/0x48
[ 1814.852406] dev_activate+0x4b/0x129
[ 1814.852569] __dev_open+0xe7/0x104
[ 1814.852730] __dev_change_flags+0xc6/0x15c
[ 1814.852899] dev_change_flags+0x25/0x59
[ 1814.853064] do_setlink+0x30c/0xb3f
[ 1814.853228] ? check_chain_key+0xb0/0xfd
[ 1814.853396] ? check_chain_key+0xb0/0xfd
[ 1814.853565] rtnl_newlink+0x3a4/0x729
[ 1814.853728] ? rtnl_newlink+0x117/0x729
[ 1814.853905] ? ns_capable_common+0xd/0xb1
[ 1814.854072] ? ns_capable+0x13/0x15
[ 1814.854234] rtnetlink_rcv_msg+0x188/0x197
[ 1814.854404] ? rcu_read_unlock+0x3e/0x5f
[ 1814.854572] ? rtnl_newlink+0x729/0x729
[ 1814.854737] netlink_rcv_skb+0x6c/0xce
[ 1814.854902] rtnetlink_rcv+0x23/0x2a
[ 1814.855064] netlink_unicast+0x103/0x181
[ 1814.855230] netlink_sendmsg+0x326/0x337
[ 1814.855398] sock_sendmsg_nosec+0x14/0x3f
[ 1814.855584] sock_sendmsg+0x29/0x2e
[ 1814.855747] ___sys_sendmsg+0x209/0x28b
[ 1814.855912] ? do_raw_spin_unlock+0xcd/0xf8
[ 1814.856082] ? _raw_spin_unlock+0x27/0x31
[ 1814.856251] ? __handle_mm_fault+0x651/0xdb1
[ 1814.856421] ? check_chain_key+0xb0/0xfd
[ 1814.856592] __sys_sendmsg+0x45/0x63
[ 1814.856755] ? __sys_sendmsg+0x45/0x63
[ 1814.856923] SyS_sendmsg+0x19/0x1b
[ 1814.857083] entry_SYSCALL_64_fastpath+0x23/0xc2
[ 1814.857256] RIP: 0033:0x7f733b2dd690
[ 1814.857419] RSP: 002b:
00007ffe1d3387d8 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 1814.858238] RAX:
ffffffffffffffda RBX:
ffffffff810d278c RCX:
00007f733b2dd690
[ 1814.858445] RDX:
0000000000000000 RSI:
00007ffe1d338820 RDI:
0000000000000003
[ 1814.858651] RBP:
ffff88005adcbf98 R08:
0000000000000001 R09:
0000000000000003
[ 1814.858856] R10:
00007ffe1d3385a0 R11:
0000000000000246 R12:
0000000000000002
[ 1814.859060] R13:
000000000066f1a0 R14:
00007ffe1d3408d0 R15:
0000000000000000
[ 1814.859267] ? trace_hardirqs_off_caller+0xa7/0xcf
[ 1814.859446] Code: 10 55 48 89 c7 48 89 e5 e8 45 a1 fb ff 31 c0 5d c3
31 c0 c3 66 66 66 66 90 55 48 89 e5 41 56 41 55 41 54 53 49 89 fd 49 8b
45 30 <4c> 8b 20 41 8b 5c 24 38 31 c9 31 d2 48 c7 c7 50 8e 1d 82 41 89
[ 1814.860022] RIP: hrtimer_active+0x17/0x8a RSP:
ffff88005adcb590
[ 1814.860214] CR2:
0000000000000000
Fixes:
87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Fixes:
0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Aleksandrov [Wed, 30 Aug 2017 09:48:59 +0000 (12:48 +0300)]
sch_hhf: fix null pointer dereference on init failure
commit
32db864d33c21fd70a217ba53cb7224889354ffb upstream.
If sch_hhf fails in its ->init() function (either due to wrong
user-space arguments as below or memory alloc failure of hh_flows) it
will do a null pointer deref of q->hh_flows in its ->destroy() function.
To reproduce the crash:
$ tc qdisc add dev eth0 root hhf quantum 2000000 non_hh_weight
10000000
Crash log:
[ 690.654882] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 690.655565] IP: hhf_destroy+0x48/0xbc
[ 690.655944] PGD
37345067
[ 690.655948] P4D
37345067
[ 690.656252] PUD
58402067
[ 690.656554] PMD 0
[ 690.656857]
[ 690.657362] Oops: 0000 [#1] SMP
[ 690.657696] Modules linked in:
[ 690.658032] CPU: 3 PID: 920 Comm: tc Not tainted 4.13.0-rc6+ #57
[ 690.658525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 690.659255] task:
ffff880058578000 task.stack:
ffff88005acbc000
[ 690.659747] RIP: 0010:hhf_destroy+0x48/0xbc
[ 690.660146] RSP: 0018:
ffff88005acbf9e0 EFLAGS:
00010246
[ 690.660601] RAX:
0000000000000000 RBX:
0000000000000020 RCX:
0000000000000000
[ 690.661155] RDX:
0000000000000000 RSI:
0000000000000001 RDI:
ffffffff821f63f0
[ 690.661710] RBP:
ffff88005acbfa08 R08:
ffffffff81b10a90 R09:
0000000000000000
[ 690.662267] R10:
00000000f42b7019 R11:
ffff880058578000 R12:
00000000ffffffea
[ 690.662820] R13:
ffff8800372f6400 R14:
0000000000000000 R15:
0000000000000000
[ 690.663769] FS:
00007f8ae5e8b740(0000) GS:
ffff88005d980000(0000) knlGS:
0000000000000000
[ 690.667069] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 690.667965] CR2:
0000000000000000 CR3:
0000000058523000 CR4:
00000000000406e0
[ 690.668918] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 690.669945] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 690.671003] Call Trace:
[ 690.671743] qdisc_create+0x377/0x3fd
[ 690.672534] tc_modify_qdisc+0x4d2/0x4fd
[ 690.673324] rtnetlink_rcv_msg+0x188/0x197
[ 690.674204] ? rcu_read_unlock+0x3e/0x5f
[ 690.675091] ? rtnl_newlink+0x729/0x729
[ 690.675877] netlink_rcv_skb+0x6c/0xce
[ 690.676648] rtnetlink_rcv+0x23/0x2a
[ 690.677405] netlink_unicast+0x103/0x181
[ 690.678179] netlink_sendmsg+0x326/0x337
[ 690.678958] sock_sendmsg_nosec+0x14/0x3f
[ 690.679743] sock_sendmsg+0x29/0x2e
[ 690.680506] ___sys_sendmsg+0x209/0x28b
[ 690.681283] ? __handle_mm_fault+0xc7d/0xdb1
[ 690.681915] ? check_chain_key+0xb0/0xfd
[ 690.682449] __sys_sendmsg+0x45/0x63
[ 690.682954] ? __sys_sendmsg+0x45/0x63
[ 690.683471] SyS_sendmsg+0x19/0x1b
[ 690.683974] entry_SYSCALL_64_fastpath+0x23/0xc2
[ 690.684516] RIP: 0033:0x7f8ae529d690
[ 690.685016] RSP: 002b:
00007fff26d2d6b8 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 690.685931] RAX:
ffffffffffffffda RBX:
ffffffff810d278c RCX:
00007f8ae529d690
[ 690.686573] RDX:
0000000000000000 RSI:
00007fff26d2d700 RDI:
0000000000000003
[ 690.687047] RBP:
ffff88005acbff98 R08:
0000000000000001 R09:
0000000000000000
[ 690.687519] R10:
00007fff26d2d480 R11:
0000000000000246 R12:
0000000000000002
[ 690.687996] R13:
0000000001258070 R14:
0000000000000001 R15:
0000000000000000
[ 690.688475] ? trace_hardirqs_off_caller+0xa7/0xcf
[ 690.688887] Code: 00 00 e8 2a 02 ae ff 49 8b bc 1d 60 02 00 00 48 83
c3 08 e8 19 02 ae ff 48 83 fb 20 75 dc 45 31 f6 4d 89 f7 4d 03 bd 20 02
00 00 <49> 8b 07 49 39 c7 75 24 49 83 c6 10 49 81 fe 00 40 00 00 75 e1
[ 690.690200] RIP: hhf_destroy+0x48/0xbc RSP:
ffff88005acbf9e0
[ 690.690636] CR2:
0000000000000000
Fixes:
87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Fixes:
10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Aleksandrov [Wed, 30 Aug 2017 09:48:58 +0000 (12:48 +0300)]
sch_multiq: fix double free on init failure
commit
e89d469e3be3ed3d7124a803211a463ff83d0964 upstream.
The below commit added a call to ->destroy() on init failure, but multiq
still frees ->queues on error in init, but ->queues is also freed by
->destroy() thus we get double free and corrupted memory.
Very easy to reproduce (eth0 not multiqueue):
$ tc qdisc add dev eth0 root multiq
RTNETLINK answers: Operation not supported
$ ip l add dumdum type dummy
(crash)
Trace log:
[ 3929.467747] general protection fault: 0000 [#1] SMP
[ 3929.468083] Modules linked in:
[ 3929.468302] CPU: 3 PID: 967 Comm: ip Not tainted 4.13.0-rc6+ #56
[ 3929.468625] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 3929.469124] task:
ffff88003716a700 task.stack:
ffff88005872c000
[ 3929.469449] RIP: 0010:__kmalloc_track_caller+0x117/0x1be
[ 3929.469746] RSP: 0018:
ffff88005872f6a0 EFLAGS:
00010246
[ 3929.470042] RAX:
00000000000002de RBX:
0000000058a59000 RCX:
00000000000002df
[ 3929.470406] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffffffff821f7020
[ 3929.470770] RBP:
ffff88005872f6e8 R08:
000000000001f010 R09:
0000000000000000
[ 3929.471133] R10:
ffff88005872f730 R11:
0000000000008cdd R12:
ff006d75646d7564
[ 3929.471496] R13:
00000000014000c0 R14:
ffff88005b403c00 R15:
ffff88005b403c00
[ 3929.471869] FS:
00007f0b70480740(0000) GS:
ffff88005d980000(0000) knlGS:
0000000000000000
[ 3929.472286] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 3929.472677] CR2:
00007ffcee4f3000 CR3:
0000000059d45000 CR4:
00000000000406e0
[ 3929.473209] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 3929.474109] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 3929.474873] Call Trace:
[ 3929.475337] ? kstrdup_const+0x23/0x25
[ 3929.475863] kstrdup+0x2e/0x4b
[ 3929.476338] kstrdup_const+0x23/0x25
[ 3929.478084] __kernfs_new_node+0x28/0xbc
[ 3929.478478] kernfs_new_node+0x35/0x55
[ 3929.478929] kernfs_create_link+0x23/0x76
[ 3929.479478] sysfs_do_create_link_sd.isra.2+0x85/0xd7
[ 3929.480096] sysfs_create_link+0x33/0x35
[ 3929.480649] device_add+0x200/0x589
[ 3929.481184] netdev_register_kobject+0x7c/0x12f
[ 3929.481711] register_netdevice+0x373/0x471
[ 3929.482174] rtnl_newlink+0x614/0x729
[ 3929.482610] ? rtnl_newlink+0x17f/0x729
[ 3929.483080] rtnetlink_rcv_msg+0x188/0x197
[ 3929.483533] ? rcu_read_unlock+0x3e/0x5f
[ 3929.483984] ? rtnl_newlink+0x729/0x729
[ 3929.484420] netlink_rcv_skb+0x6c/0xce
[ 3929.484858] rtnetlink_rcv+0x23/0x2a
[ 3929.485291] netlink_unicast+0x103/0x181
[ 3929.485735] netlink_sendmsg+0x326/0x337
[ 3929.486181] sock_sendmsg_nosec+0x14/0x3f
[ 3929.486614] sock_sendmsg+0x29/0x2e
[ 3929.486973] ___sys_sendmsg+0x209/0x28b
[ 3929.487340] ? do_raw_spin_unlock+0xcd/0xf8
[ 3929.487719] ? _raw_spin_unlock+0x27/0x31
[ 3929.488092] ? __handle_mm_fault+0x651/0xdb1
[ 3929.488471] ? check_chain_key+0xb0/0xfd
[ 3929.488847] __sys_sendmsg+0x45/0x63
[ 3929.489206] ? __sys_sendmsg+0x45/0x63
[ 3929.489576] SyS_sendmsg+0x19/0x1b
[ 3929.489901] entry_SYSCALL_64_fastpath+0x23/0xc2
[ 3929.490172] RIP: 0033:0x7f0b6fb93690
[ 3929.490423] RSP: 002b:
00007ffcee4ed588 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 3929.490881] RAX:
ffffffffffffffda RBX:
ffffffff810d278c RCX:
00007f0b6fb93690
[ 3929.491198] RDX:
0000000000000000 RSI:
00007ffcee4ed5d0 RDI:
0000000000000003
[ 3929.491521] RBP:
ffff88005872ff98 R08:
0000000000000001 R09:
0000000000000000
[ 3929.491801] R10:
00007ffcee4ed350 R11:
0000000000000246 R12:
0000000000000002
[ 3929.492075] R13:
000000000066f1a0 R14:
00007ffcee4f5680 R15:
0000000000000000
[ 3929.492352] ? trace_hardirqs_off_caller+0xa7/0xcf
[ 3929.492590] Code: 8b 45 c0 48 8b 45 b8 74 17 48 8b 4d c8 83 ca ff 44
89 ee 4c 89 f7 e8 83 ca ff ff 49 89 c4 eb 49 49 63 56 20 48 8d 48 01 4d
8b 06 <49> 8b 1c 14 48 89 c2 4c 89 e0 65 49 0f c7 08 0f 94 c0 83 f0 01
[ 3929.493335] RIP: __kmalloc_track_caller+0x117/0x1be RSP:
ffff88005872f6a0
Fixes:
87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Fixes:
f07d1501292b ("multiq: Further multiqueue cleanup")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[AmitP: Removed unused variable 'err' in multiq_init()]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Aleksandrov [Wed, 30 Aug 2017 09:48:57 +0000 (12:48 +0300)]
sch_htb: fix crash on init failure
commit
88c2ace69dbef696edba77712882af03879abc9c upstream.
The commit below added a call to the ->destroy() callback for all qdiscs
which failed in their ->init(), but some were not prepared for such
change and can't handle partially initialized qdisc. HTB is one of them
and if any error occurs before the qdisc watchdog timer and qdisc work are
initialized then we can hit either a null ptr deref (timer->base) when
canceling in ->destroy or lockdep error info about trying to register
a non-static key and a stack dump. So to fix these two move the watchdog
timer and workqueue init before anything that can err out.
To reproduce userspace needs to send broken htb qdisc create request,
tested with a modified tc (q_htb.c).
Trace log:
[ 2710.897602] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 2710.897977] IP: hrtimer_active+0x17/0x8a
[ 2710.898174] PGD
58fab067
[ 2710.898175] P4D
58fab067
[ 2710.898353] PUD
586c0067
[ 2710.898531] PMD 0
[ 2710.898710]
[ 2710.899045] Oops: 0000 [#1] SMP
[ 2710.899232] Modules linked in:
[ 2710.899419] CPU: 1 PID: 950 Comm: tc Not tainted 4.13.0-rc6+ #54
[ 2710.899646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 2710.900035] task:
ffff880059ed2700 task.stack:
ffff88005ad4c000
[ 2710.900262] RIP: 0010:hrtimer_active+0x17/0x8a
[ 2710.900467] RSP: 0018:
ffff88005ad4f960 EFLAGS:
00010246
[ 2710.900684] RAX:
0000000000000000 RBX:
ffff88003701e298 RCX:
0000000000000000
[ 2710.900933] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff88003701e298
[ 2710.901177] RBP:
ffff88005ad4f980 R08:
0000000000000001 R09:
0000000000000001
[ 2710.901419] R10:
ffff88005ad4f800 R11:
0000000000000400 R12:
0000000000000000
[ 2710.901663] R13:
ffff88003701e298 R14:
ffffffff822a4540 R15:
ffff88005ad4fac0
[ 2710.901907] FS:
00007f2f5e90f740(0000) GS:
ffff88005d880000(0000) knlGS:
0000000000000000
[ 2710.902277] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2710.902500] CR2:
0000000000000000 CR3:
0000000058ca3000 CR4:
00000000000406e0
[ 2710.902744] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 2710.902977] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 2710.903180] Call Trace:
[ 2710.903332] hrtimer_try_to_cancel+0x1a/0x93
[ 2710.903504] hrtimer_cancel+0x15/0x20
[ 2710.903667] qdisc_watchdog_cancel+0x12/0x14
[ 2710.903866] htb_destroy+0x2e/0xf7
[ 2710.904097] qdisc_create+0x377/0x3fd
[ 2710.904330] tc_modify_qdisc+0x4d2/0x4fd
[ 2710.904511] rtnetlink_rcv_msg+0x188/0x197
[ 2710.904682] ? rcu_read_unlock+0x3e/0x5f
[ 2710.904849] ? rtnl_newlink+0x729/0x729
[ 2710.905017] netlink_rcv_skb+0x6c/0xce
[ 2710.905183] rtnetlink_rcv+0x23/0x2a
[ 2710.905345] netlink_unicast+0x103/0x181
[ 2710.905511] netlink_sendmsg+0x326/0x337
[ 2710.905679] sock_sendmsg_nosec+0x14/0x3f
[ 2710.905847] sock_sendmsg+0x29/0x2e
[ 2710.906010] ___sys_sendmsg+0x209/0x28b
[ 2710.906176] ? do_raw_spin_unlock+0xcd/0xf8
[ 2710.906346] ? _raw_spin_unlock+0x27/0x31
[ 2710.906514] ? __handle_mm_fault+0x651/0xdb1
[ 2710.906685] ? check_chain_key+0xb0/0xfd
[ 2710.906855] __sys_sendmsg+0x45/0x63
[ 2710.907018] ? __sys_sendmsg+0x45/0x63
[ 2710.907185] SyS_sendmsg+0x19/0x1b
[ 2710.907344] entry_SYSCALL_64_fastpath+0x23/0xc2
Note that probably this bug goes further back because the default qdisc
handling always calls ->destroy on init failure too.
Fixes:
87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Fixes:
0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chas Williams [Thu, 6 Sep 2018 15:09:10 +0000 (11:09 -0400)]
Fixes: Commit
2aa6d036b716 ("mm: numa: avoid waiting on freed migrated pages")
Commit
2aa6d036b716 ("mm: numa: avoid waiting on freed migrated pages")
was an incomplete backport of the upstream commit. It is necessary to
always reset page_nid before attempting any early exit.
The original commit conflicted due to lack of commit
82b0f8c39a38
("mm: join struct fault_env and vm_fault") in 4.9 so it wasn't a clean
application, and the change must have just gotten lost in the noise.
Signed-off-by: Chas Williams <chas3@att.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Govindarajulu Varadarajan [Mon, 30 Jul 2018 16:56:54 +0000 (09:56 -0700)]
enic: do not call enic_change_mtu in enic_probe
commit
cb5c6568867325f9905e80c96531d963bec8e5ea upstream.
In commit
ab123fe071c9 ("enic: handle mtu change for vf properly")
ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being
called without rtnl held. enic_probe() calls enic_change_mtu()
without rtnl held. At this point netdev is not registered yet.
Remove call to enic_change_mtu and assign the mtu to netdev->mtu.
Fixes:
ab123fe071c9 ("enic: handle mtu change for vf properly")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Mon, 3 Sep 2018 13:39:34 +0000 (10:39 -0300)]
Revert "ARM: imx_v6_v7_defconfig: Select ULPI support"
This reverts commit
721476147fd2571309b6aa6daa695b39170602ef.
This commit causes reboot to fail on imx6 wandboard, so let's
revert it.
Cc: <stable@vger.kernel.org> #4.9
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tyler Hicks [Tue, 4 Sep 2018 15:24:05 +0000 (15:24 +0000)]
irda: Only insert new objects into the global database via setsockopt
The irda_setsockopt() function conditionally allocates memory for a new
self->ias_object or, in some cases, reuses the existing
self->ias_object. Existing objects were incorrectly reinserted into the
LM_IAS database which corrupted the doubly linked list used for the
hashbin implementation of the LM_IAS database. When combined with a
memory leak in irda_bind(), this issue could be leveraged to create a
use-after-free vulnerability in the hashbin list. This patch fixes the
issue by only inserting newly allocated objects into the database.
CVE-2018-6555
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tyler Hicks [Tue, 4 Sep 2018 15:24:04 +0000 (15:24 +0000)]
irda: Fix memory leak caused by repeated binds of irda socket
The irda_bind() function allocates memory for self->ias_obj without
checking to see if the socket is already bound. A userspace process
could repeatedly bind the socket, have each new object added into the
LM-IAS database, and lose the reference to the old object assigned to
the socket to exhaust memory resources. This patch errors out of the
bind operation when self->ias_obj is already assigned.
CVE-2018-6554
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Tue, 28 Aug 2018 19:59:10 +0000 (12:59 -0700)]
kbuild: make missing $DEPMOD a Warning instead of an Error
commit
914b087ff9e0e9a399a4927fa30793064afc0178 upstream.
When $DEPMOD is not found, only print a warning instead of exiting
with an error message and error status:
Warning: 'make modules_install' requires /sbin/depmod. Please install it.
This is probably in the kmod package.
Change the Error to a Warning because "not all build hosts for cross
compiling Linux are Linux systems and are able to provide a working
port of depmod, especially at the file patch /sbin/depmod."
I.e., "make modules_install" may be used to copy/install the
loadable modules files to a target directory on a build system and
then transferred to an embedded device where /sbin/depmod is run
instead of it being run on the build system.
Fixes:
934193a654c1 ("kbuild: verify that $DEPMOD is installed")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Chih-Wei Huang <cwhuang@linux.org.tw>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Maxim Zhukov <mussitantesmortem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juergen Gross [Tue, 21 Aug 2018 15:37:55 +0000 (17:37 +0200)]
x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear
commit
b2d7a075a1ccef2fb321d595802190c8e9b39004 upstream.
Using only 32-bit writes for the pte will result in an intermediate
L1TF vulnerable PTE. When running as a Xen PV guest this will at once
switch the guest to shadow mode resulting in a loss of performance.
Use arch_atomic64_xchg() instead which will perform the requested
operation atomically with all 64 bits.
Some performance considerations according to:
https://software.intel.com/sites/default/files/managed/ad/dc/Intel-Xeon-Scalable-Processor-throughput-latency.pdf
The main number should be the latency, as there is no tight loop around
native_ptep_get_and_clear().
"lock cmpxchg8b" has a latency of 20 cycles, while "lock xchg" (with a
memory operand) isn't mentioned in that document. "lock xadd" (with xadd
having 3 cycles less latency than xchg) has a latency of 11, so we can
assume a latency of 14 for "lock xchg".
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
[ Atomic operations gained an arch_ prefix in
8bf705d13039
("locking/atomic/x86: Switch atomic.h to use atomic-instrumented.h") so
s/arch_atomic64_xchg/atomic64_xchg/ for backport.]
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Fernandes (Google) [Mon, 23 Jul 2018 21:25:31 +0000 (14:25 -0700)]
debugobjects: Make stack check warning more informative
commit
fc91a3c4c27acdca0bc13af6fbb68c35cfd519f2 upstream.
While debugging an issue debugobject tracking warned about an annotation
issue of an object on stack. It turned out that the issue was due to the
object in concern being on a different stack which was due to another
issue.
Thomas suggested to print the pointers and the location of the stack for
the currently running task. This helped to figure out that the object was
on the wrong stack.
As this is general useful information for debugging similar issues, make
the error message more informative by printing the pointers.
[ tglx: Massaged changelog ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: kernel-team@android.com
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: astrachan@google.com
Link: https://lkml.kernel.org/r/20180723212531.202328-1-joel@joelfernandes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 21 Feb 2017 14:21:47 +0000 (06:21 -0800)]
tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
commit
29869d66870a715177bfb505f66a7e0e8bcc89c3 upstream.
This reverts commit
e70ac171658679ecf6bea4bbd9e9325cd6079d2b.
jtcp_rcv_established() is in fact called with hard irq being disabled.
Initial bug report from Ricardo Nabinger Sanchez [1] still needs
to be investigated, but does not look like a TCP bug.
[1] https://www.spinics.net/lists/netdev/msg420960.html
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Cc: Ricardo Nabinger Sanchez <rnsanchez@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Thu, 23 Aug 2018 05:53:32 +0000 (05:53 +0000)]
drm/edid: Add 6 bpc quirk for SDC panel in Lenovo B50-80
commit
25da75043f8690fd083878447c91f289dfb63b87 upstream.
Another panel that reports "DFP 1.x compliant TMDS" but it supports 6bpc
instead of 8 bpc.
Apply 6 bpc quirk for the panel to fix it.
BugLink: https://bugs.launchpad.net/bugs/1788308
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180823055332.7723-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Fri, 24 Aug 2018 15:06:34 +0000 (16:06 +0100)]
ARM: rockchip: Force CONFIG_PM on Rockchip systems
[ Upstream commit
d1558dfd9f22c99a5b8e1354ad881ee40749da89 ]
A number of the Rockchip-specific drivers (IOMMU, display controllers)
are now assuming that CONFIG_PM is set, and may completely misbehave
if that's not the case.
Since there is hardly any reason for this configuration option not
to be selected anyway, let's require it (in the same way Tegra already
does).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Fri, 24 Aug 2018 15:06:35 +0000 (16:06 +0100)]
arm64: rockchip: Force CONFIG_PM on Rockchip systems
[ Upstream commit
7db7a8f5638a2ffe0c0c0d55b5186b6191fd6af7 ]
A number of the Rockchip-specific drivers (IOMMU, display controllers)
are now assuming that CONFIG_PM is set, and may completely misbehave
if that's not the case.
Since there is hardly any reason for this configuration option not
to be selected anyway, let's require it (in the same way Tegra already
does).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Fri, 22 Jun 2018 04:35:00 +0000 (12:35 +0800)]
btrfs: Don't remove block group that still has pinned down bytes
[ Upstream commit
43794446548730ac8461be30bbe47d5d027d1d16 ]
[BUG]
Under certain KVM load and LTP tests, it is possible to hit the
following calltrace if quota is enabled:
BTRFS critical (device vda2): unable to find logical
8820195328 length 4096
BTRFS critical (device vda2): unable to find logical
8820195328 length 4096
WARNING: CPU: 0 PID: 49 at ../block/blk-core.c:172 blk_status_to_errno+0x1a/0x30
CPU: 0 PID: 49 Comm: kworker/u2:1 Not tainted 4.12.14-15-default #1 SLE15 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
task:
ffff9f827b340bc0 task.stack:
ffffb4f8c0304000
RIP: 0010:blk_status_to_errno+0x1a/0x30
Call Trace:
submit_extent_page+0x191/0x270 [btrfs]
? btrfs_create_repair_bio+0x130/0x130 [btrfs]
__do_readpage+0x2d2/0x810 [btrfs]
? btrfs_create_repair_bio+0x130/0x130 [btrfs]
? run_one_async_done+0xc0/0xc0 [btrfs]
__extent_read_full_page+0xe7/0x100 [btrfs]
? run_one_async_done+0xc0/0xc0 [btrfs]
read_extent_buffer_pages+0x1ab/0x2d0 [btrfs]
? run_one_async_done+0xc0/0xc0 [btrfs]
btree_read_extent_buffer_pages+0x94/0xf0 [btrfs]
read_tree_block+0x31/0x60 [btrfs]
read_block_for_search.isra.35+0xf0/0x2e0 [btrfs]
btrfs_search_slot+0x46b/0xa00 [btrfs]
? kmem_cache_alloc+0x1a8/0x510
? btrfs_get_token_32+0x5b/0x120 [btrfs]
find_parent_nodes+0x11d/0xeb0 [btrfs]
? leaf_space_used+0xb8/0xd0 [btrfs]
? btrfs_leaf_free_space+0x49/0x90 [btrfs]
? btrfs_find_all_roots_safe+0x93/0x100 [btrfs]
btrfs_find_all_roots_safe+0x93/0x100 [btrfs]
btrfs_find_all_roots+0x45/0x60 [btrfs]
btrfs_qgroup_trace_extent_post+0x20/0x40 [btrfs]
btrfs_add_delayed_data_ref+0x1a3/0x1d0 [btrfs]
btrfs_alloc_reserved_file_extent+0x38/0x40 [btrfs]
insert_reserved_file_extent.constprop.71+0x289/0x2e0 [btrfs]
btrfs_finish_ordered_io+0x2f4/0x7f0 [btrfs]
? pick_next_task_fair+0x2cd/0x530
? __switch_to+0x92/0x4b0
btrfs_worker_helper+0x81/0x300 [btrfs]
process_one_work+0x1da/0x3f0
worker_thread+0x2b/0x3f0
? process_one_work+0x3f0/0x3f0
kthread+0x11a/0x130
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x35/0x40
BTRFS critical (device vda2): unable to find logical
8820195328 length 16384
BTRFS: error (device vda2) in btrfs_finish_ordered_io:3023: errno=-5 IO failure
BTRFS info (device vda2): forced readonly
BTRFS error (device vda2): pending csums is 2887680
[CAUSE]
It's caused by race with block group auto removal:
- There is a meta block group X, which has only one tree block
The tree block belongs to fs tree 257.
- In current transaction, some operation modified fs tree 257
The tree block gets COWed, so the block group X is empty, and marked
as unused, queued to be deleted.
- Some workload (like fsync) wakes up cleaner_kthread()
Which will call btrfs_delete_unused_bgs() to remove unused block
groups.
So block group X along its chunk map get removed.
- Some delalloc work finished for fs tree 257
Quota needs to get the original reference of the extent, which will
read tree blocks of commit root of 257.
Then since the chunk map gets removed, the above warning gets
triggered.
[FIX]
Just let btrfs_delete_unused_bgs() skip block group which still has
pinned bytes.
However there is a minor side effect: currently we only queue empty
blocks at update_block_group(), and such empty block group with pinned
bytes won't go through update_block_group() again, such block group
won't be removed, until it gets new extent allocated and removed.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Tue, 3 Jul 2018 09:10:07 +0000 (17:10 +0800)]
btrfs: relocation: Only remove reloc rb_trees if reloc control has been initialized
[ Upstream commit
389305b2aa68723c754f88d9dbd268a400e10664 ]
Invalid reloc tree can cause kernel NULL pointer dereference when btrfs
does some cleanup of the reloc roots.
It turns out that fs_info::reloc_ctl can be NULL in
btrfs_recover_relocation() as we allocate relocation control after all
reloc roots have been verified.
So when we hit: note, we haven't called set_reloc_control() thus
fs_info::reloc_ctl is still NULL.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199833
Reported-by: Xu Wen <wen.xu@gatech.edu>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Tested-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Misono Tomohiro [Tue, 31 Jul 2018 07:20:21 +0000 (16:20 +0900)]
btrfs: replace: Reset on-disk dev stats value after replace
[ Upstream commit
1e7e1f9e3aba00c9b9c323bfeeddafe69ff21ff6 ]
on-disk devs stats value is updated in btrfs_run_dev_stats(),
which is called during commit transaction, if device->dev_stats_ccnt
is not zero.
Since current replace operation does not touch dev_stats_ccnt,
on-disk dev stats value is not updated. Therefore "btrfs device stats"
may return old device's value after umount/mount
(Example: See "btrfs ins dump-t -t DEV $DEV" after btrfs/100 finish).
Fix this by just incrementing dev_stats_ccnt in
btrfs_dev_replace_finishing() when replace is succeeded and this will
update the values.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Levin Du [Sat, 4 Aug 2018 07:31:02 +0000 (15:31 +0800)]
clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
[ Upstream commit
640332d1a089909df08bc9f3e42888a2019c66e2 ]
PWM2 is commonly used to control voltage of PWM regulator of VDD_LOG in
RK3399. On the Firefly-RK3399 board, PWM2 outputs 40 KHz square wave
from power on and the VDD_LOG is about 0.9V. When the kernel boots
normally into the system, the PWM2 keeps outputing PWM signal.
But the kernel hangs randomly after "Starting kernel ..." line on that
board. When it happens, PWM2 outputs high level which causes VDD_LOG
drops to 0.4V below the normal operating voltage.
By adding "pclk_rkpwm_pmu" to the rk3399_pmucru_critical_clocks array,
PWM clock is ensured to be prepared at startup and the PWM2 output is
normal. After repeated tests, the early boot hang is gone.
This patch works on both Firefly-RK3399 and ROC-RK3399-PC boards.
Signed-off-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mahesh Salgaonkar [Wed, 4 Jul 2018 17:57:02 +0000 (23:27 +0530)]
powerpc/pseries: Avoid using the size greater than RTAS_ERROR_LOG_MAX.
[ Upstream commit
74e96bf44f430cf7a01de19ba6cf49b361cdfd6e ]
The global mce data buffer that used to copy rtas error log is of 2048
(RTAS_ERROR_LOG_MAX) bytes in size. Before the copy we read
extended_log_length from rtas error log header, then use max of
extended_log_length and RTAS_ERROR_LOG_MAX as a size of data to be copied.
Ideally the platform (phyp) will never send extended error log with
size > 2048. But if that happens, then we have a risk of buffer overrun
and corruption. Fix this by using min_t instead.
Fixes:
d368514c3097 ("powerpc: Fix corruption when grabbing FWNMI data")
Reported-by: Michal Suchanek <msuchanek@suse.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Mon, 23 Jul 2018 14:15:18 +0000 (09:15 -0500)]
SMB3: Number of requests sent should be displayed for SMB3 not just CIFS
[ Upstream commit
289131e1f1e6ad8c661ec05e176b8f0915672059 ]
For SMB2/SMB3 the number of requests sent was not displayed
in /proc/fs/cifs/Stats unless CONFIG_CIFS_STATS2 was
enabled (only number of failed requests displayed). As
with earlier dialects, we should be displaying these
counters if CONFIG_CIFS_STATS is enabled. They
are important for debugging.
e.g. when you cat /proc/fs/cifs/Stats (before the patch)
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 690 maximum at one time: 2
1) \\localhost\test
SMBs: 975
Negotiates: 0 sent 0 failed
SessionSetups: 0 sent 0 failed
Logoffs: 0 sent 0 failed
TreeConnects: 0 sent 0 failed
TreeDisconnects: 0 sent 0 failed
Creates: 0 sent 2 failed
Closes: 0 sent 0 failed
Flushes: 0 sent 0 failed
Reads: 0 sent 0 failed
Writes: 0 sent 0 failed
Locks: 0 sent 0 failed
IOCTLs: 0 sent 1 failed
Cancels: 0 sent 0 failed
Echos: 0 sent 0 failed
QueryDirectories: 0 sent 63 failed
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Wed, 1 Aug 2018 05:56:12 +0000 (00:56 -0500)]
smb3: fix reset of bytes read and written stats
[ Upstream commit
c281bc0c7412308c7ec0888904f7c99353da4796 ]
echo 0 > /proc/fs/cifs/Stats is supposed to reset the stats
but there were four (see example below) that were not reset
(bytes read and witten, total vfs ops and max ops
at one time).
...
0 session 0 share reconnects
Total vfs operations: 100 maximum at one time: 2
1) \\localhost\test
SMBs: 0
Bytes read: 502092 Bytes written:
31457286
TreeConnects: 0 total 0 failed
TreeDisconnects: 0 total 0 failed
...
This patch fixes cifs_stats_proc_write to properly reset
those four.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Tue, 7 Aug 2018 11:34:16 +0000 (19:34 +0800)]
RDS: IB: fix 'passing zero to ERR_PTR()' warning
[ Upstream commit
5941923da29e84bc9e2a1abb2c14fffaf8d71e2f ]
Fix a static code checker warning:
net/rds/ib_frmr.c:82 rds_ib_alloc_frmr() warn: passing zero to 'ERR_PTR'
The error path for ib_alloc_mr failure should set err to PTR_ERR.
Fixes:
1659185fb4d0 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Breno Leitao [Tue, 7 Aug 2018 14:15:39 +0000 (11:15 -0300)]
selftests/powerpc: Kill child processes on SIGINT
[ Upstream commit
7c27a26e1ed5a7dd709aa19685d2c98f64e1cf0c ]
There are some powerpc selftests, as tm/tm-unavailable, that run for a long
period (>120 seconds), and if it is interrupted, as pressing CRTL-C
(SIGINT), the foreground process (harness) dies but the child process and
threads continue to execute (with PPID = 1 now) in background.
In this case, you'd think the whole test exited, but there are remaining
threads and processes being executed in background. Sometimes these
zombies processes are doing annoying things, as consuming the whole CPU or
dumping things to STDOUT.
This patch fixes this problem by attaching an empty signal handler to
SIGINT in the harness process. This handler will interrupt (EINTR) the
parent process waitpid() call, letting the code to follow through the
normal flow, which will kill all the processes in the child process group.
This patch also fixes a typo.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 6 Aug 2018 10:05:13 +0000 (11:05 +0100)]
staging: comedi: ni_mio_common: fix subdevice flags for PFI subdevice
[ Upstream commit
e083926b3e269d4064825dcf2ad50c636fddf8cf ]
The PFI subdevice flags indicate that the subdevice is readable and
writeable, but that is only true for the supported "M-series" boards,
not the older "E-series" boards. Only set the SDF_READABLE and
SDF_WRITABLE subdevice flags for the M-series boards. These two flags
are mainly for informational purposes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Pittman [Mon, 6 Aug 2018 19:53:12 +0000 (15:53 -0400)]
dm kcopyd: avoid softlockup in run_complete_job
[ Upstream commit
784c9a29e99eb40b842c29ecf1cc3a79e00fb629 ]
It was reported that softlockups occur when using dm-snapshot ontop of
slow (rbd) storage. E.g.:
[ 4047.990647] watchdog: BUG: soft lockup - CPU#10 stuck for 22s! [kworker/10:23:26177]
...
[ 4048.034151] Workqueue: kcopyd do_work [dm_mod]
[ 4048.034156] RIP: 0010:copy_callback+0x41/0x160 [dm_snapshot]
...
[ 4048.034190] Call Trace:
[ 4048.034196] ? __chunk_is_tracked+0x70/0x70 [dm_snapshot]
[ 4048.034200] run_complete_job+0x5f/0xb0 [dm_mod]
[ 4048.034205] process_jobs+0x91/0x220 [dm_mod]
[ 4048.034210] ? kcopyd_put_pages+0x40/0x40 [dm_mod]
[ 4048.034214] do_work+0x46/0xa0 [dm_mod]
[ 4048.034219] process_one_work+0x171/0x370
[ 4048.034221] worker_thread+0x1fc/0x3f0
[ 4048.034224] kthread+0xf8/0x130
[ 4048.034226] ? max_active_store+0x80/0x80
[ 4048.034227] ? kthread_bind+0x10/0x10
[ 4048.034231] ret_from_fork+0x35/0x40
[ 4048.034233] Kernel panic - not syncing: softlockup: hung tasks
Fix this by calling cond_resched() after run_complete_job()'s callout to
the dm_kcopyd_notify_fn (which is dm-snap.c:copy_callback in the above
trace).
Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Petazzoni [Fri, 3 Aug 2018 14:38:44 +0000 (16:38 +0200)]
PCI: mvebu: Fix I/O space end address calculation
[ Upstream commit
dfd0309fd7b30a5baffaf47b2fccb88b46d64d69 ]
pcie->realio.end should be the address of last byte of the area,
therefore using resource_size() of another resource is not correct, we
must substract 1 to get the address of the last byte.
Fixes:
11be65472a427 ("PCI: mvebu: Adapt to the new device tree layout")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 8 Aug 2018 14:29:09 +0000 (17:29 +0300)]
scsi: aic94xx: fix an error code in aic94xx_init()
[ Upstream commit
0756c57bce3d26da2592d834d8910b6887021701 ]
We accidentally return success instead of -ENOMEM on this error path.
Fixes:
2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Wed, 8 Aug 2018 08:30:03 +0000 (10:30 +0200)]
ACPI / scan: Initialize status to ACPI_STA_DEFAULT
[ Upstream commit
5971b0c1594d6c34e257101ed5fdffec65205c50 ]
Since commit
63347db0affa "ACPI / scan: Use acpi_bus_get_status() to
initialize ACPI_TYPE_DEVICE devs" the status field of normal acpi_devices
gets set to 0 by acpi_bus_type_and_status() and filled with its actual
value later when acpi_add_single_object() calls acpi_bus_get_status().
This means that any acpi_match_device_ids() calls in between will always
fail with -ENOENT.
We already have a workaround for this, which temporary forces status to
ACPI_STA_DEFAULT in drivers/acpi/x86/utils.c: acpi_device_always_present()
and the next commit in this series adds another acpi_match_device_ids()
call between status being initialized as 0 and the acpi_bus_get_status()
call.
Rather then adding another workaround, this commit makes
acpi_bus_type_and_status() initialize status to ACPI_STA_DEFAULT, this is
safe to do as the only code looking at status between the initialization
and the acpi_bus_get_status() call is those acpi_match_device_ids() calls.
Note this does mean that we need to (re)set status to 0 in case the
acpi_bus_get_status() call fails.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Haberland [Wed, 25 Jul 2018 11:27:10 +0000 (13:27 +0200)]
s390/dasd: fix panic for failed online processing
[ Upstream commit
7c6553d4db03350dad0110c3224194c19df76a8f ]
Fix a panic that occurs for a device that got an error in
dasd_eckd_check_characteristics() during online processing.
For example the read configuration data command may have failed.
If this error occurs the device is not being set online and the earlier
invoked steps during online processing are rolled back. Therefore
dasd_eckd_uncheck_device() is called which needs a valid private
structure. But this pointer is not valid if
dasd_eckd_check_characteristics() has failed.
Check for a valid device->private pointer to prevent a panic.
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Haberland [Wed, 25 Jul 2018 12:00:47 +0000 (14:00 +0200)]
s390/dasd: fix hanging offline processing due to canceled worker
[ Upstream commit
669f3765b755fd8739ab46ce3a9c6292ce8b3d2a ]
During offline processing two worker threads are canceled without
freeing the device reference which leads to a hanging offline process.
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Edwards [Wed, 8 Aug 2018 19:27:53 +0000 (13:27 -0600)]
block: bvec_nr_vecs() returns value for wrong slab
[ Upstream commit
d6c02a9beb67f13d5f14f23e72fa9981e8b84477 ]
In commit
ed996a52c868 ("block: simplify and cleanup bvec pool
handling"), the value of the slab index is incremented by one in
bvec_alloc() after the allocation is done to indicate an index value of
0 does not need to be later freed.
bvec_nr_vecs() was not updated accordingly, and thus returns the wrong
value. Decrement idx before performing the lookup.
Fixes:
ed996a52c868 ("block: simplify and cleanup bvec pool handling")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandipan Das [Thu, 9 Aug 2018 16:19:29 +0000 (21:49 +0530)]
perf probe powerpc: Fix trace event post-processing
[ Upstream commit
354b064b8ebc1e1ede58550ca9e08bfa81e6af43 ]
In some cases, a symbol may have multiple aliases. Attempting to add an
entry probe for such symbols results in a probe being added at an
incorrect location while it fails altogether for return probes. This is
only applicable for binaries with debug information.
During the arch-dependent post-processing, the offset from the start of
the symbol at which the probe is to be attached is determined and added
to the start address of the symbol to get the probe's location. In case
there are multiple aliases, this offset gets added multiple times for
each alias of the symbol and we end up with an incorrect probe location.
This can be verified on a powerpc64le system as shown below.
$ nm /lib/modules/$(uname -r)/build/vmlinux | grep "sys_open$"
...
c000000000414290 T __se_sys_open
c000000000414290 T sys_open
$ objdump -d /lib/modules/$(uname -r)/build/vmlinux | grep -A 10 "<__se_sys_open>:"
c000000000414290 <__se_sys_open>:
c000000000414290: 19 01 4c 3c addis r2,r12,281
c000000000414294: 70 c4 42 38 addi r2,r2,-15248
c000000000414298: a6 02 08 7c mflr r0
c00000000041429c: e8 ff a1 fb std r29,-24(r1)
c0000000004142a0: f0 ff c1 fb std r30,-16(r1)
c0000000004142a4: f8 ff e1 fb std r31,-8(r1)
c0000000004142a8: 10 00 01 f8 std r0,16(r1)
c0000000004142ac: c1 ff 21 f8 stdu r1,-64(r1)
c0000000004142b0: 78 23 9f 7c mr r31,r4
c0000000004142b4: 78 1b 7e 7c mr r30,r3
For both the entry probe and the return probe, the probe location
should be _text+4276888 (0xc000000000414298). Since another alias
exists for 'sys_open', the post-processing code will end up adding
the offset (8 for powerpc64le) twice and perf will attempt to add
the probe at _text+4276896 (0xc0000000004142a0) instead.
Before:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found :
c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276896
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found :
c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276896
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276896
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
After:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found :
c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276888
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found :
c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276888
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276888
Added new event:
probe:sys_open__return (on sys_open%return)
...
Reported-by: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes:
99e608b5954c ("perf probe ppc64le: Fix probe location when using DWARF")
Link: http://lkml.kernel.org/r/20180809161929.35058-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 8 Aug 2018 11:57:24 +0000 (14:57 +0300)]
powerpc: Fix size calculation using resource_size()
[ Upstream commit
c42d3be0c06f0c1c416054022aa535c08a1f9b39 ]
The problem is the the calculation should be "end - start + 1" but the
plus one is missing in this calculation.
Fixes:
8626816e905e ("powerpc: add support for MPIC message register API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean-Philippe Brucker [Wed, 18 Jul 2018 02:14:45 +0000 (19:14 -0700)]
net/9p: fix error path of p9_virtio_probe
[ Upstream commit
92aef4675d5b1b55404e1532379e343bed0e5cf2 ]
Currently when virtio_find_single_vq fails, we go through del_vqs which
throws a warning (Trying to free already-free IRQ). Skip del_vqs if vq
allocation failed.
Link: http://lkml.kernel.org/r/20180524101021.49880-1-jean-philippe.brucker@arm.com
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Bortoli [Mon, 23 Jul 2018 18:42:53 +0000 (20:42 +0200)]
net/9p/trans_fd.c: fix race by holding the lock
[ Upstream commit
9f476d7c540cb57556d3cc7e78704e6cd5100f5f ]
It may be possible to run p9_fd_cancel() with a deleted req->req_list
and incur in a double del. To fix hold the client->lock while changing
the status, so the other threads will be synchronized.
Link: http://lkml.kernel.org/r/20180723184253.6682-1-tomasbortoli@gmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+735d926e9d1317c3310c@syzkaller.appspotmail.com
To: Eric Van Hensbergen <ericvh@gmail.com>
To: Ron Minnich <rminnich@sandia.gov>
To: Latchesar Ionkov <lucho@ionkov.net>
Cc: Yiwen Jiang <jiangyiwen@huwei.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonas Gorski [Thu, 9 Aug 2018 08:59:01 +0000 (10:59 +0200)]
irqchip/bcm7038-l1: Hide cpu offline callback when building for !SMP
[ Upstream commit
0702bc4d2fe793018ad9aa0eb14bff7f526c4095 ]
When compiling bmips with SMP disabled, the build fails with:
drivers/irqchip/irq-bcm7038-l1.o: In function `bcm7038_l1_cpu_offline':
drivers/irqchip/irq-bcm7038-l1.c:242: undefined reference to `irq_set_affinity_locked'
make[5]: *** [vmlinux] Error 1
Fix this by adding and setting bcm7038_l1_cpu_offline only when actually
compiling for SMP. It wouldn't have been used anyway, as it requires
CPU_HOTPLUG, which in turn requires SMP.
Fixes:
34c535793bcb ("irqchip/bcm7038-l1: Implement irq_cpu_offline() callback")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gal Pressman [Thu, 9 Aug 2018 19:00:47 +0000 (22:00 +0300)]
RDMA/hns: Fix usage of bitmap allocation functions return values
[ Upstream commit
a1ceeca679dccc492235f0f629d9e9f7b3d51ca8 ]
hns bitmap allocation functions return 0 on success and -1 on failure.
Callers of these functions wrongly used their return value as an errno,
fix that by making a proper conversion.
Fixes:
a598c6f4c5a8 ("IB/hns: Simplify function of pd alloc and qp alloc")
Signed-off-by: Gal Pressman <pressmangal@gmail.com>
Acked-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleh Filipovich [Fri, 10 Aug 2018 20:07:25 +0000 (22:07 +0200)]
platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360
[ Upstream commit
880b29ac107d15644bf4da228376ba3cd6af6d71 ]
Add entry to WMI keymap for lid flip event on Asus UX360.
On Asus Zenbook ux360 flipping lid from/to tablet mode triggers
keyscan code 0xfa which cannot be handled and results in kernel
log message "Unknown key fa pressed".
Signed-off-by: Aleh Filipovich<aleh@appnexus.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sat, 4 Aug 2018 03:59:51 +0000 (20:59 -0700)]
mfd: sm501: Set coherent_dma_mask when creating subdevices
[ Upstream commit
2f606da78230f09cf1a71fde6ee91d0c710fa2b2 ]
Instantiating the sm501 OHCI subdevice results in a kernel warning.
sm501-usb sm501-usb: SM501 OHCI
sm501-usb sm501-usb: new USB bus registered, assigned bus number 1
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516
ohci_init+0x194/0x2d8
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Tainted: G W
4.18.0-rc7-00178-g0b5b1f9a78b5 #1
PC is at ohci_init+0x194/0x2d8
PR is at ohci_init+0x168/0x2d8
PC :
8c27844c SP :
8f81dd94 SR :
40008001
TEA :
29613060
R0 :
00000000 R1 :
00000000 R2 :
00000000 R3 :
00000202
R4 :
8fa98b88 R5 :
8c277e68 R6 :
00000000 R7 :
00000000
R8 :
8f965814 R9 :
8c388100 R10 :
8fa98800 R11 :
8fa98928
R12 :
8c48302c R13 :
8fa98920 R14 :
8c48302c
MACH:
00000096 MACL:
0000017c GBR :
00000000 PR :
8c278420
Call trace:
[<(ptrval)>] usb_add_hcd+0x1e8/0x6ec
[<(ptrval)>] _dev_info+0x0/0x54
[<(ptrval)>] arch_local_save_flags+0x0/0x8
[<(ptrval)>] arch_local_irq_restore+0x0/0x24
[<(ptrval)>] ohci_hcd_sm501_drv_probe+0x114/0x2d8
...
Initialize coherent_dma_mask when creating SM501 subdevices to fix
the problem.
Fixes:
b6d6454fdb66f ("mfd: SM501 core driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tan Hu [Wed, 25 Jul 2018 07:23:07 +0000 (15:23 +0800)]
ipvs: fix race between ip_vs_conn_new() and ip_vs_del_dest()
[ Upstream commit
a53b42c11815d2357e31a9403ae3950517525894 ]
We came across infinite loop in ipvs when using ipvs in docker
env.
When ipvs receives new packets and cannot find an ipvs connection,
it will create a new connection, then if the dest is unavailable
(i.e. IP_VS_DEST_F_AVAILABLE), the packet will be dropped sliently.
But if the dropped packet is the first packet of this connection,
the connection control timer never has a chance to start and the
ipvs connection cannot be released. This will lead to memory leak, or
infinite loop in cleanup_net() when net namespace is released like
this:
ip_vs_conn_net_cleanup at
ffffffffa0a9f31a [ip_vs]
__ip_vs_cleanup at
ffffffffa0a9f60a [ip_vs]
ops_exit_list at
ffffffff81567a49
cleanup_net at
ffffffff81568b40
process_one_work at
ffffffff810a851b
worker_thread at
ffffffff810a9356
kthread at
ffffffff810b0b6f
ret_from_fork at
ffffffff81697a18
race condition:
CPU1 CPU2
ip_vs_in()
ip_vs_conn_new()
ip_vs_del_dest()
__ip_vs_unlink_dest()
~IP_VS_DEST_F_AVAILABLE
cp->dest && !IP_VS_DEST_F_AVAILABLE
__ip_vs_conn_put
...
cleanup_net ---> infinite looping
Fix this by checking whether the timer already started.
Signed-off-by: Tan Hu <tan.hu@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Rudo [Mon, 13 Aug 2018 09:16:57 +0000 (11:16 +0200)]
s390/kdump: Fix memleak in nt_vmcoreinfo
[ Upstream commit
2d2e7075b87181ed0c675e4936e20bdadba02e1f ]
The vmcoreinfo of a crashed system is potentially fragmented. Thus the
crash kernel has an intermediate step where the vmcoreinfo is copied into a
temporary, continuous buffer in the crash kernel memory. This temporary
buffer is never freed. Free it now to prevent the memleak.
While at it replace all occurrences of "VMCOREINFO" by its corresponding
macro to prevent potential renaming issues.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Wed, 15 Aug 2018 16:12:07 +0000 (09:12 -0700)]
platform/x86: intel_punit_ipc: fix build errors
[ Upstream commit
340fd4cff43f18bace9358d4decdc9b6ed0715be ]
Fix build errors by #including <linux/io.h>.
../drivers/platform/x86/intel_punit_ipc.c: In function 'ipc_read_status':
../drivers/platform/x86/intel_punit_ipc.c:55:2: error: implicit declaration of function 'readl' [-Werror=implicit-function-declaration]
return readl(ipcdev->base[type][BASE_IFACE]);
../drivers/platform/x86/intel_punit_ipc.c: In function 'ipc_write_cmd':
../drivers/platform/x86/intel_punit_ipc.c:60:2: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration]
writel(cmd, ipcdev->base[type][BASE_IFACE]);
Fixes:
447ae3166702 ("x86: Don't include linux/irq.h from asm/hardirq.h")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Zha Qipeng <qipeng.zha@intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Fri, 17 Aug 2018 22:44:34 +0000 (15:44 -0700)]
fs/dcache.c: fix kmemcheck splat at take_dentry_name_snapshot()
[ Upstream commit
6cd00a01f0c1ae6a852b09c59b8dd55cc6c35d1d ]
Since only dentry->d_name.len + 1 bytes out of DNAME_INLINE_LEN bytes
are initialized at __d_alloc(), we can't copy the whole size
unconditionally.
WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (
ffff8fa27465ac50)
636f6e66696766732e746d70000000000010000000000000020000000188ffff
i i i i i i i i i i i i i u u u u u u u u u u i i i i i u u u u
^
RIP: 0010:take_dentry_name_snapshot+0x28/0x50
RSP: 0018:
ffffa83000f5bdf8 EFLAGS:
00010246
RAX:
0000000000000020 RBX:
ffff8fa274b20550 RCX:
0000000000000002
RDX:
ffffa83000f5be40 RSI:
ffff8fa27465ac50 RDI:
ffffa83000f5be60
RBP:
ffffa83000f5bdf8 R08:
ffffa83000f5be48 R09:
0000000000000001
R10:
ffff8fa27465ac00 R11:
ffff8fa27465acc0 R12:
ffff8fa27465ac00
R13:
ffff8fa27465acc0 R14:
0000000000000000 R15:
0000000000000000
FS:
00007f79737ac8c0(0000) GS:
ffffffff8fc30000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffff8fa274c0b000 CR3:
0000000134aa7002 CR4:
00000000000606f0
take_dentry_name_snapshot+0x28/0x50
vfs_rename+0x128/0x870
SyS_rename+0x3b2/0x3d0
entry_SYSCALL_64_fastpath+0x1a/0xa4
0xffffffffffffffff
Link: http://lkml.kernel.org/r/201709131912.GBG39012.QMJLOVFSFFOOtH@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Ryabinin [Fri, 17 Aug 2018 22:46:57 +0000 (15:46 -0700)]
mm/fadvise.c: fix signed overflow UBSAN complaint
[ Upstream commit
a718e28f538441a3b6612da9ff226973376cdf0f ]
Signed integer overflow is undefined according to the C standard. The
overflow in ksys_fadvise64_64() is deliberate, but since it is signed
overflow, UBSAN complains:
UBSAN: Undefined behaviour in mm/fadvise.c:76:10
signed integer overflow:
4 +
9223372036854775805 cannot be represented in type 'long long int'
Use unsigned types to do math. Unsigned overflow is defined so UBSAN
will not complain about it. This patch doesn't change generated code.
[akpm@linux-foundation.org: add comment explaining the casts]
Link: http://lkml.kernel.org/r/20180629184453.7614-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: <icytxw@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Wed, 18 Jul 2018 09:18:45 +0000 (10:18 +0100)]
virtio: pci-legacy: Validate queue pfn
[ Upstream commit
69599206ea9a3f8f2e94d46580579cbf9d08ad6c ]
Legacy PCI over virtio uses a 32bit PFN for the queue. If the
queue pfn is too large to fit in 32bits, which we could hit on
arm64 systems with 52bit physical addresses (even with 64K page
size), we simply miss out a proper link to the other side of
the queue.
Add a check to validate the PFN, rather than silently breaking
the devices.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Cc: Peter Maydel <peter.maydell@linaro.org>
Cc: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Wed, 15 Aug 2018 19:30:38 +0000 (12:30 -0700)]
scripts: modpost: check memory allocation results
[ Upstream commit
1f3aa9002dc6a0d59a4b599b4fc8f01cf43ef014 ]
Fix missing error check for memory allocation functions in
scripts/mod/modpost.c.
Fixes kernel bugzilla #200319:
https://bugzilla.kernel.org/show_bug.cgi?id=200319
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yuexing Wang <wangyxlandq@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OGAWA Hirofumi [Wed, 22 Aug 2018 04:59:44 +0000 (21:59 -0700)]
fat: validate ->i_start before using
[ Upstream commit
0afa9626667c3659ef8bd82d42a11e39fedf235c ]
On corrupted FATfs may have invalid ->i_start. To handle it, this checks
->i_start before using, and return proper error code.
Link: http://lkml.kernel.org/r/87o9f8y1t5.fsf_-_@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Tested-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ernesto A. Fernández [Fri, 24 Aug 2018 00:00:25 +0000 (17:00 -0700)]
hfsplus: fix NULL dereference in hfsplus_lookup()
[ Upstream commit
a7ec7a4193a2eb3b5341243fc0b621c1ac9e4ec4 ]
An HFS+ filesystem can be mounted read-only without having a metadata
directory, which is needed to support hardlinks. But if the catalog
data is corrupted, a directory lookup may still find dentries claiming
to be hardlinks.
hfsplus_lookup() does check that ->hidden_dir is not NULL in such a
situation, but mistakenly does so after dereferencing it for the first
time. Reorder this check to prevent a crash.
This happens when looking up corrupted catalog data (dentry) on a
filesystem with no metadata directory (this could only ever happen on a
read-only mount). Wen Xu sent the replication steps in detail to the
fsdevel list: https://bugzilla.kernel.org/show_bug.cgi?id=200297
Link: http://lkml.kernel.org/r/20180712215344.q44dyrhymm4ajkao@eaf
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 22 Aug 2018 04:59:34 +0000 (21:59 -0700)]
reiserfs: change j_timestamp type to time64_t
[ Upstream commit
8b73ce6a4bae4fe12bcb2c361c0da4183c2e1b6f ]
This uses the deprecated time_t type but is write-only, and could be
removed, but as Jeff explains, having a timestamp can be usefule for
post-mortem analysis in crash dumps.
In order to remove one of the last instances of time_t, this changes the
type to time64_t, same as j_trans_start_time.
Link: http://lkml.kernel.org/r/20180622133315.221210-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Wed, 22 Aug 2018 05:00:58 +0000 (22:00 -0700)]
fork: don't copy inconsistent signal handler state to child
[ Upstream commit
06e62a46bbba20aa5286102016a04214bb446141 ]
Before this change, if a multithreaded process forks while one of its
threads is changing a signal handler using sigaction(), the memcpy() in
copy_sighand() can race with the struct assignment in do_sigaction(). It
isn't clear whether this can cause corruption of the userspace signal
handler pointer, but it definitely can cause inconsistency between
different fields of struct sigaction.
Take the appropriate spinlock to avoid this.
I have tested that this patch prevents inconsistency between sa_sigaction
and sa_flags, which is possible before this patch.
Link: http://lkml.kernel.org/r/20180702145108.73189-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Fri, 17 Aug 2018 21:43:54 +0000 (14:43 -0700)]
sunrpc: Don't use stack buffer with scatterlist
[ Upstream commit
44090cc876926277329e1608bafc01b9f6da627f ]
Fedora got a bug report from NFS:
kernel BUG at include/linux/scatterlist.h:143!
...
RIP: 0010:sg_init_one+0x7d/0x90
..
make_checksum+0x4e7/0x760 [rpcsec_gss_krb5]
gss_get_mic_kerberos+0x26e/0x310 [rpcsec_gss_krb5]
gss_marshal+0x126/0x1a0 [auth_rpcgss]
? __local_bh_enable_ip+0x80/0xe0
? call_transmit_status+0x1d0/0x1d0 [sunrpc]
call_transmit+0x137/0x230 [sunrpc]
__rpc_execute+0x9b/0x490 [sunrpc]
rpc_run_task+0x119/0x150 [sunrpc]
nfs4_run_exchange_id+0x1bd/0x250 [nfsv4]
_nfs4_proc_exchange_id+0x2d/0x490 [nfsv4]
nfs41_discover_server_trunking+0x1c/0xa0 [nfsv4]
nfs4_discover_server_trunking+0x80/0x270 [nfsv4]
nfs4_init_client+0x16e/0x240 [nfsv4]
? nfs_get_client+0x4c9/0x5d0 [nfs]
? _raw_spin_unlock+0x24/0x30
? nfs_get_client+0x4c9/0x5d0 [nfs]
nfs4_set_client+0xb2/0x100 [nfsv4]
nfs4_create_server+0xff/0x290 [nfsv4]
nfs4_remote_mount+0x28/0x50 [nfsv4]
mount_fs+0x3b/0x16a
vfs_kern_mount.part.35+0x54/0x160
nfs_do_root_mount+0x7f/0xc0 [nfsv4]
nfs4_try_mount+0x43/0x70 [nfsv4]
? get_nfs_version+0x21/0x80 [nfs]
nfs_fs_mount+0x789/0xbf0 [nfs]
? pcpu_alloc+0x6ca/0x7e0
? nfs_clone_super+0x70/0x70 [nfs]
? nfs_parse_mount_options+0xb40/0xb40 [nfs]
mount_fs+0x3b/0x16a
vfs_kern_mount.part.35+0x54/0x160
do_mount+0x1fd/0xd50
ksys_mount+0xba/0xd0
__x64_sys_mount+0x21/0x30
do_syscall_64+0x60/0x1f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This is BUG_ON(!virt_addr_valid(buf)) triggered by using a stack
allocated buffer with a scatterlist. Convert the buffer for
rc4salt to be dynamically allocated instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1615258
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ernesto A. Fernández [Fri, 24 Aug 2018 00:00:31 +0000 (17:00 -0700)]
hfs: prevent crash on exit from failed search
[ Upstream commit
dc2572791d3a41bab94400af2b6bca9d71ccd303 ]
hfs_find_exit() expects fd->bnode to be NULL after a search has failed.
hfs_brec_insert() may instead set it to an error-valued pointer. Fix
this to prevent a crash.
Link: http://lkml.kernel.org/r/53d9749a029c41b4016c495fc5838c9dba3afc52.1530294815.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Wed, 22 Aug 2018 04:59:12 +0000 (21:59 -0700)]
hfsplus: don't return 0 when fill_super() failed
[ Upstream commit
7464726cb5998846306ed0a7d6714afb2e37b25d ]
syzbot is reporting NULL pointer dereference at mount_fs() [1]. This is
because hfsplus_fill_super() is by error returning 0 when
hfsplus_fill_super() detected invalid filesystem image, and mount_bdev()
is returning NULL because dget(s->s_root) == NULL if s->s_root == NULL,
and mount_fs() is accessing root->d_sb because IS_ERR(root) == false if
root == NULL. Fix this by returning -EINVAL when hfsplus_fill_super()
detected invalid filesystem image.
[1] https://syzkaller.appspot.com/bug?id=
21acb6850cecbc960c927229e597158cf35f33d0
Link: http://lkml.kernel.org/r/d83ce31a-874c-dd5b-f790-41405983a5be@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+01ffaf5d9568dd1609f7@syzkaller.appspotmail.com>
Reviewed-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ronnie Sahlberg [Wed, 22 Aug 2018 02:19:24 +0000 (12:19 +1000)]
cifs: check if SMB2 PDU size has been padded and suppress the warning
[ Upstream commit
e6c47dd0da1e3a484e778046fc10da0b20606a86 ]
Some SMB2/3 servers, Win2016 but possibly others too, adds padding
not only between PDUs in a compound but also to the final PDU.
This padding extends the PDU to a multiple of 8 bytes.
Check if the unexpected length looks like this might be the case
and avoid triggering the log messages for :
"SMB2 server sent bad RFC1001 len %d not %d\n"
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vlad Buslov [Mon, 3 Sep 2018 21:44:42 +0000 (00:44 +0300)]
net: sched: action_ife: take reference to meta module
[ Upstream commit
84cb8eb26cb9ce3c79928094962a475a9d850a53 ]
Recent refactoring of add_metainfo() caused use_all_metadata() to add
metainfo to ife action metalist without taking reference to module. This
causes warning in module_put called from ife action cleanup function.
Implement add_metainfo_and_get_ops() function that returns with reference
to module taken if metainfo was added successfully, and call it from
use_all_metadata(), instead of calling __add_metainfo() directly.
Example warning:
[ 646.344393] WARNING: CPU: 1 PID: 2278 at kernel/module.c:1139 module_put+0x1cb/0x230
[ 646.352437] Modules linked in: act_meta_skbtcindex act_meta_mark act_meta_skbprio act_ife ife veth nfsv3 nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c tun ebtable_filter ebtables ip6table_filter ip6_tables bridge stp llc mlx5_ib ib_uverbs ib_core intel_rapl sb_edac x86_pkg_temp_thermal mlx5_core coretemp kvm_intel kvm nfsd igb irqbypass crct10dif_pclmul devlink crc32_pclmul mei_me joydev ses crc32c_intel enclosure auth_rpcgss i2c_algo_bit ioatdma ptp mei pps_core ghash_clmulni_intel iTCO_wdt iTCO_vendor_support pcspkr dca ipmi_ssif lpc_ich target_core_mod i2c_i801 ipmi_si ipmi_devintf pcc_cpufreq wmi ipmi_msghandler nfs_acl lockd acpi_pad acpi_power_meter grace sunrpc mpt3sas raid_class scsi_transport_sas
[ 646.425631] CPU: 1 PID: 2278 Comm: tc Not tainted 4.19.0-rc1+ #799
[ 646.432187] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 646.440595] RIP: 0010:module_put+0x1cb/0x230
[ 646.445238] Code: f3 66 94 02 e8 26 ff fa ff 85 c0 74 11 0f b6 1d 51 30 94 02 80 fb 01 77 60 83 e3 01 74 13 65 ff 0d 3a 83 db 73 e9 2b ff ff ff <0f> 0b e9 00 ff ff ff e8 59 01 fb ff 85 c0 75 e4 48 c7 c2 20 62 6b
[ 646.464997] RSP: 0018:
ffff880354d37068 EFLAGS:
00010286
[ 646.470599] RAX:
0000000000000000 RBX:
ffffffffc0a52518 RCX:
ffffffff8c2668db
[ 646.478118] RDX:
0000000000000003 RSI:
dffffc0000000000 RDI:
ffffffffc0a52518
[ 646.485641] RBP:
ffffffffc0a52180 R08:
fffffbfff814a4a4 R09:
fffffbfff814a4a3
[ 646.493164] R10:
ffffffffc0a5251b R11:
fffffbfff814a4a4 R12:
1ffff1006a9a6e0d
[ 646.500687] R13:
00000000ffffffff R14:
ffff880362bab890 R15:
dead000000000100
[ 646.508213] FS:
00007f4164c99800(0000) GS:
ffff88036fe40000(0000) knlGS:
0000000000000000
[ 646.516961] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 646.523080] CR2:
00007f41638b8420 CR3:
0000000351df0004 CR4:
00000000001606e0
[ 646.530595] Call Trace:
[ 646.533408] ? find_symbol_in_section+0x260/0x260
[ 646.538509] tcf_ife_cleanup+0x11b/0x200 [act_ife]
[ 646.543695] tcf_action_cleanup+0x29/0xa0
[ 646.548078] __tcf_action_put+0x5a/0xb0
[ 646.552289] ? nla_put+0x65/0xe0
[ 646.555889] __tcf_idr_release+0x48/0x60
[ 646.560187] tcf_generic_walker+0x448/0x6b0
[ 646.564764] ? tcf_action_dump_1+0x450/0x450
[ 646.569411] ? __lock_is_held+0x84/0x110
[ 646.573720] ? tcf_ife_walker+0x10c/0x20f [act_ife]
[ 646.578982] tca_action_gd+0x972/0xc40
[ 646.583129] ? tca_get_fill.constprop.17+0x250/0x250
[ 646.588471] ? mark_lock+0xcf/0x980
[ 646.592324] ? check_chain_key+0x140/0x1f0
[ 646.596832] ? debug_show_all_locks+0x240/0x240
[ 646.601839] ? memset+0x1f/0x40
[ 646.605350] ? nla_parse+0xca/0x1a0
[ 646.609217] tc_ctl_action+0x215/0x230
[ 646.613339] ? tcf_action_add+0x220/0x220
[ 646.617748] rtnetlink_rcv_msg+0x56a/0x6d0
[ 646.622227] ? rtnl_fdb_del+0x3f0/0x3f0
[ 646.626466] netlink_rcv_skb+0x18d/0x200
[ 646.630752] ? rtnl_fdb_del+0x3f0/0x3f0
[ 646.634959] ? netlink_ack+0x500/0x500
[ 646.639106] netlink_unicast+0x2d0/0x370
[ 646.643409] ? netlink_attachskb+0x340/0x340
[ 646.648050] ? _copy_from_iter_full+0xe9/0x3e0
[ 646.652870] ? import_iovec+0x11e/0x1c0
[ 646.657083] netlink_sendmsg+0x3b9/0x6a0
[ 646.661388] ? netlink_unicast+0x370/0x370
[ 646.665877] ? netlink_unicast+0x370/0x370
[ 646.670351] sock_sendmsg+0x6b/0x80
[ 646.674212] ___sys_sendmsg+0x4a1/0x520
[ 646.678443] ? copy_msghdr_from_user+0x210/0x210
[ 646.683463] ? lock_downgrade+0x320/0x320
[ 646.687849] ? debug_show_all_locks+0x240/0x240
[ 646.692760] ? do_raw_spin_unlock+0xa2/0x130
[ 646.697418] ? _raw_spin_unlock+0x24/0x30
[ 646.701798] ? __handle_mm_fault+0x1819/0x1c10
[ 646.706619] ? __pmd_alloc+0x320/0x320
[ 646.710738] ? debug_show_all_locks+0x240/0x240
[ 646.715649] ? restore_nameidata+0x7b/0xa0
[ 646.720117] ? check_chain_key+0x140/0x1f0
[ 646.724590] ? check_chain_key+0x140/0x1f0
[ 646.729070] ? __fget_light+0xbc/0xd0
[ 646.733121] ? __sys_sendmsg+0xd7/0x150
[ 646.737329] __sys_sendmsg+0xd7/0x150
[ 646.741359] ? __ia32_sys_shutdown+0x30/0x30
[ 646.746003] ? up_read+0x53/0x90
[ 646.749601] ? __do_page_fault+0x484/0x780
[ 646.754105] ? do_syscall_64+0x1e/0x2c0
[ 646.758320] do_syscall_64+0x72/0x2c0
[ 646.762353] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 646.767776] RIP: 0033:0x7f4163872150
[ 646.771713] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24
[ 646.791474] RSP: 002b:
00007ffdef7d6b58 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 646.799721] RAX:
ffffffffffffffda RBX:
0000000000000024 RCX:
00007f4163872150
[ 646.807240] RDX:
0000000000000000 RSI:
00007ffdef7d6bd0 RDI:
0000000000000003
[ 646.814760] RBP:
000000005b8b9482 R08:
0000000000000001 R09:
0000000000000000
[ 646.822286] R10:
00000000000005e7 R11:
0000000000000246 R12:
00007ffdef7dad20
[ 646.829807] R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000679bc0
[ 646.837360] irq event stamp: 6083
[ 646.841043] hardirqs last enabled at (6081): [<
ffffffff8c220a7d>] __call_rcu+0x17d/0x500
[ 646.849882] hardirqs last disabled at (6083): [<
ffffffff8c004f06>] trace_hardirqs_off_thunk+0x1a/0x1c
[ 646.859775] softirqs last enabled at (5968): [<
ffffffff8d4004a1>] __do_softirq+0x4a1/0x6ee
[ 646.868784] softirqs last disabled at (6082): [<
ffffffffc0a78759>] tcf_ife_cleanup+0x39/0x200 [act_ife]
[ 646.878845] ---[ end trace
b1b8c12ffe51e657 ]---
Fixes:
5ffe57da29b3 ("act_ife: fix a potential deadlock")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Sun, 19 Aug 2018 19:22:13 +0000 (12:22 -0700)]
act_ife: fix a potential deadlock
[ Upstream commit
5ffe57da29b3802baeddaa40909682bbb4cb4d48 ]
use_all_metadata() acquires read_lock(&ife_mod_lock), then calls
add_metainfo() which calls find_ife_oplist() which acquires the same
lock again. Deadlock!
Introduce __add_metainfo() which accepts struct tcf_meta_ops *ops
as an additional parameter and let its callers to decide how
to find it. For use_all_metadata(), it already has ops, no
need to find it again, just call __add_metainfo() directly.
And, as ife_mod_lock is only needed for find_ife_oplist(),
this means we can make non-atomic allocation for populate_metalist()
now.
Fixes:
817e9f2c5c26 ("act_ife: acquire ife_mod_lock before reading ifeoplist")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Sun, 19 Aug 2018 19:22:12 +0000 (12:22 -0700)]
act_ife: move tcfa_lock down to where necessary
[ Upstream commit
4e407ff5cd67ec76eeeea1deec227b7982dc7f66 ]
The only time we need to take tcfa_lock is when adding
a new metainfo to an existing ife->metalist. We don't need
to take tcfa_lock so early and so broadly in tcf_ife_init().
This means we can always take ife_mod_lock first, avoid the
reverse locking ordering warning as reported by Vlad.
Reported-by: Vlad Buslov <vladbu@mellanox.com>
Tested-by: Vlad Buslov <vladbu@mellanox.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Hemminger [Tue, 21 Aug 2018 17:40:38 +0000 (10:40 -0700)]
hv_netvsc: ignore devices that are not PCI
[ Upstream commit
b93c1b5ac8643cc08bb74fa8ae21d6c63dfcb23d ]
Registering another device with same MAC address (such as TAP, VPN or
DPDK KNI) will confuse the VF autobinding logic. Restrict the search
to only run if the device is known to be a PCI attached VF.
Fixes:
e8ff40d4bff1 ("hv_netvsc: improve VF device matching")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Fri, 24 Aug 2018 08:53:13 +0000 (16:53 +0800)]
vhost: correctly check the iova range when waking virtqueue
[ Upstream commit
2d66f997f0545c8f7fc5cf0b49af1decb35170e7 ]
We don't wakeup the virtqueue if the first byte of pending iova range
is the last byte of the range we just got updated. This will lead a
virtqueue to wait for IOTLB updating forever. Fixing by correct the
check and wake up the virtqueue in this case.
Fixes:
6b1e6cc7855b ("vhost: new device IOTLB API")
Reported-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Mon, 27 Aug 2018 10:38:31 +0000 (18:38 +0800)]
sctp: hold transport before accessing its asoc in sctp_transport_get_next
[ Upstream commit
bab1be79a5169ac748d8292b20c86d874022d7ba ]
As Marcelo noticed, in sctp_transport_get_next, it is iterating over
transports but then also accessing the association directly, without
checking any refcnts before that, which can cause an use-after-free
Read.
So fix it by holding transport before accessing the association. With
that, sctp_transport_hold calls can be removed in the later places.
Fixes:
626d16f50f39 ("sctp: export some apis or variables for sctp_diag and reuse some for proc")
Reported-by: syzbot+fe62a0c9aa6a85c6de16@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>