Daniel Vetter [Sun, 20 Oct 2013 18:37:21 +0000 (20:37 +0200)]
tests/kms_flip: More leeway for dummy load tests
At least on my old atom i945 they take forever. Also, metric tons of
pipe B underruns while running rcs-flip-vs-panning. No idea why that
happens.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Sun, 20 Oct 2013 17:24:08 +0000 (19:24 +0200)]
kmstest: don't pollute stderr for impossible output configs
Otherwise on machines where the only output available is restricted to
one pipe we'll have tons of "warn" results for no gain in the piglit
runner. All tests that use the kmstest helpers already check the
return value and do something sensible (like skip the tests if there's
really no config available).
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Sun, 20 Oct 2013 14:11:49 +0000 (16:11 +0200)]
tests/kms_flip: Unconfuse the framenumber step checking
We run flips and vblank waits in parallel, which means the step
for each is the maximum. If we'd switch to an interleaved scheme
(to be able to check the correlation) we'd need to add them instead.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Sun, 20 Oct 2013 14:10:32 +0000 (16:10 +0200)]
tests/kms_flip: no absolute vblank wait on the first frame
We don't have a reference value for the vblank counter yet, so
will end up waiting for a long time for the vblank counter to
wrap around again.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Sat, 19 Oct 2013 14:21:18 +0000 (16:21 +0200)]
tets/kms_flip: disable correlation check
It's broken since it doesn't take the order the events arrived into
account and so will fall over for longer seq_step values in the vblank
event: Since the flip completes right away, but the vblank later on
they won't have the same timestamp.
For now just give up, we could resurrect this by strictly alternating
between a flip and a vblank wait.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 18 Oct 2013 16:43:30 +0000 (18:43 +0200)]
tests/debugfs_pipe_crc: new subtest to check CRC frame numbers
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Wed, 27 Feb 2013 14:51:29 +0000 (14:51 +0000)]
rendercopy: Add a way to dump an .aub file with the rendercopy bos
v2 (by Ben): Remove libdrm dependency since intel-gpu-tools now requires
a higher version anyway. Remove associated #ifdef ENABLE_AUB_DUMP
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Daniel Vetter [Fri, 18 Oct 2013 15:53:05 +0000 (17:53 +0200)]
lib: fix the assert in igt_stop_helper
So much for developing different patches on different machines and
then not retesting after rebasing. Reported by Ben on irc.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 18 Oct 2013 13:29:20 +0000 (14:29 +0100)]
lib: Don't wait for a vblank when enabling the CRCs
This was a previous attempt to solve the first CRC being bogus. We know
wait for it and discard it at the end of the function.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 18 Oct 2013 11:27:21 +0000 (12:27 +0100)]
tests/debugfs_pipe_crc: Test the read CRCs are not null
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Daniel Vetter [Thu, 17 Oct 2013 12:18:35 +0000 (14:18 +0200)]
tests/debugfs_pipe_crc: test all connectors
Diff looks a bit ugly, but it's just due to the added indentation.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 17 Oct 2013 12:10:43 +0000 (14:10 +0200)]
tests/debugfs_pipe_crc: test all pipes
And skip them if there's no suitable connector.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 17 Oct 2013 12:09:52 +0000 (14:09 +0200)]
tests/debugfs_pipe_crc: fix fb leak
Also remove the unused connector_t->mode.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 16 Oct 2013 20:49:24 +0000 (22:49 +0200)]
tests/debugfs_pipe_crc: fall back to PIPE source
With PLANE1 and PIPE CRC sources the test will work on all currently
shipping (and planed fwiw) platforms.
Also add all the other new sources for non-ivb/hsw chips.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 16 Oct 2013 17:52:00 +0000 (19:52 +0200)]
lib/drmtest: Check that helper processes have died correctly
If the test gets stopped sometimes a helper process falls over.
We need to report this. Since we currently don't track helper
process to precisely we can't shut up the 2nd test failure messge.
This shouldn't happen anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 17 Oct 2013 08:48:29 +0000 (10:48 +0200)]
tests/ZZ_missed_irq: Fixup SOURCE_PATH handling
Copy the trick from ZZ_hangman of just cd'ing into the old working
directory in a subshell.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70561
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 17 Oct 2013 05:01:34 +0000 (22:01 -0700)]
gem_ctx_bad_exec: skip vebox when appropriate
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Jani Nikula [Tue, 8 Oct 2013 18:19:06 +0000 (21:19 +0300)]
README: list some of the dependencies
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Daniel Vetter [Wed, 16 Oct 2013 12:12:49 +0000 (14:12 +0200)]
tests/debugfs_pipe_crc: correctly skip on unsupported platforms
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Wed, 9 Oct 2013 10:47:43 +0000 (11:47 +0100)]
debugfs_pipe_crc: Let's check CRCs!
Let's add a new test that sets a mode, wait for a few vblanks (3) and
then make sure we read 3 identical CRCs.
Some subtests check for various parsing errors.
In the process, improve the debugfs helpers to deal with CRCs.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 11 Oct 2013 17:31:20 +0000 (18:31 +0100)]
lib: Add igt_wait_for_vblank() helper
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Wed, 9 Oct 2013 22:53:15 +0000 (23:53 +0100)]
lib: Make igt_debugfs_open() take the mode as argument
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Wed, 9 Oct 2013 16:54:11 +0000 (17:54 +0100)]
lib: Add a igt_display.h with a few enums and defines from the kernel
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Wed, 9 Oct 2013 16:42:52 +0000 (17:42 +0100)]
lib: Add kmstest_paint_color()
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Wed, 9 Oct 2013 12:42:13 +0000 (13:42 +0100)]
lib: Add a igt_assert_cmpint()
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Wed, 9 Oct 2013 10:45:31 +0000 (11:45 +0100)]
lib: Add igt_debugfs_fopen()
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Tue, 8 Oct 2013 22:39:33 +0000 (23:39 +0100)]
lib: Add a small helper to open debugfs files
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Matt Turner [Sat, 12 Oct 2013 00:34:13 +0000 (17:34 -0700)]
Depend on libdrm_intel >= 2.4.47.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Matt Turner [Fri, 11 Oct 2013 03:54:25 +0000 (20:54 -0700)]
configure: Don't bail if libdrm_nouveau isn't available.
We were seriously *requiring* libdrm_nouveau unless explicitly disabled?
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Daniel Vetter [Mon, 14 Oct 2013 17:10:56 +0000 (19:10 +0200)]
tests/pc8: Readd verbose error message
I deemed them a bit redundant (assuming that developers are the only
ones that look at them anyway). But Paulo requested that I readd them
for the education of QA.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 11 Oct 2013 18:53:40 +0000 (20:53 +0200)]
tests/kms_flip: fix igt_assert
I've blown the conversion in
commit
37e5b318c5dac290611099e2eec21df1e49fa71f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Oct 4 18:42:26 2013 +0200
tests/kms_flip: use igt_assert more
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70332
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 11 Oct 2013 18:22:19 +0000 (20:22 +0200)]
tests/kms_flip: Skip if the kernel doesn't let y-tiled bo slip through
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 11 Oct 2013 17:58:43 +0000 (19:58 +0200)]
tests/kms_flip: exit handler needs a fixture
Since it can fail.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70332
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thomas Wood [Thu, 10 Oct 2013 11:23:19 +0000 (12:23 +0100)]
testdisplay: Allow getopt to print error messages
By not assigning opterr, getopt will print its own error message that
includes information about whether an option is unknown or just requires
an additional argument.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Daniel Vetter [Thu, 10 Oct 2013 12:20:43 +0000 (14:20 +0200)]
tests/gem_suspend: test debugfs/sysfs reads while s/r
Just a very quick hack cobbled together with /bin/sh and exec. We
can't use system since that does stupid things with singals ... Still
we need to whack the child process pretty hard to get rid of it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 10 Oct 2013 09:22:09 +0000 (11:22 +0200)]
tests/module_reload: fail if the module didn't unload
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70336
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 9 Oct 2013 16:07:55 +0000 (09:07 -0700)]
gem_pin: Use iterator for blit batch setup
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Wed, 9 Oct 2013 15:55:24 +0000 (08:55 -0700)]
gem_exec_blt: Use iterator for blit batch setup
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Wed, 9 Oct 2013 15:37:48 +0000 (08:37 -0700)]
gem_evict_*: Use iterator for blit batch
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Wed, 9 Oct 2013 16:07:55 +0000 (09:07 -0700)]
gem_linear_blits: Use iterator for blit batch setup
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Wed, 9 Oct 2013 00:36:21 +0000 (17:36 -0700)]
gem_exec_faulting_reloc: use iterator for batchbuffer
This will help keep the code clean for new platforms which might have
differently sized relocations.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Daniel Vetter [Wed, 9 Oct 2013 19:20:40 +0000 (21:20 +0200)]
tests: add kms_addfb
Just a bunch of testcase to check that all the addfb sanity checks
work as they should.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 9 Oct 2013 18:50:50 +0000 (20:50 +0200)]
lib/drmtest: extract rawer __gem_set_tiling
For tests that expect failures. Also apply the existing gem_set_tiling
helper a bit wider.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 9 Oct 2013 02:47:53 +0000 (19:47 -0700)]
pwrite_pread: Get devid only once
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Wed, 9 Oct 2013 02:45:30 +0000 (19:45 -0700)]
pwrite_pread: Extract batch building
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Wed, 9 Oct 2013 02:41:49 +0000 (19:41 -0700)]
pwrite_pread: use execbuf.batch_len for size
This will make an upcoming change easier.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Wed, 9 Oct 2013 03:32:12 +0000 (20:32 -0700)]
gem_tiled_blits: Squash bo leak on simulation
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Wed, 9 Oct 2013 01:30:13 +0000 (18:30 -0700)]
gem_tiled_blits: Squash memory leak on simulation
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Daniel Vetter [Mon, 7 Oct 2013 20:55:14 +0000 (22:55 +0200)]
tests/kms_flip: Skip if no clone configuration could be found
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Sat, 5 Oct 2013 23:21:11 +0000 (16:21 -0700)]
configure.ac: require dri2proto for overlay
With the introduction of
commit
f9a50de3dcc501e930de6c60983a4feb57121e7e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sat Aug 17 11:12:07 2013 +0100
Introduce intel-gpu-overlay
dri2proto became a dependency (and there is no way to disable overlay
explicitly. The actual version chosen was arbitrarily stolen from mesa.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Daniel Vetter [Fri, 4 Oct 2013 17:55:56 +0000 (19:55 +0200)]
tests/pc8: Fail harder
If the test enviroment isn't properly set up we should fail the
testcase, since otherwise there's no way to make sure a feature
actually works.
To cut down on bug triaging time extract the basic test (which was
previously used to skip all subtests) into a "basic" subtest.
Also fail the test hard if the msr interface isn't available. And
switch all other check in setup_enviroment to igt_require.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69838
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 4 Oct 2013 17:49:36 +0000 (19:49 +0200)]
tests/pc8+: Only skip i2c subtest if i2c /dev interface is unavailable
Through the magic of igt_skip we only need to fail this subtest, not
the entire thing.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 4 Oct 2013 16:42:26 +0000 (18:42 +0200)]
tests/kms_flip: use igt_assert more
I've left the time delta checks as-is since those are tricky math and
my mind is feeble.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 4 Oct 2013 16:11:37 +0000 (18:11 +0200)]
tests/kms_flip: check flip count in both directions
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 4 Oct 2013 09:10:48 +0000 (11:10 +0200)]
NEWS: Mention gen7 perf counters release
This is too great to be omitted!
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 23 Aug 2013 11:32:43 +0000 (12:32 +0100)]
tests: Simulate missed breadcrumb irqs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Kenneth Graunke [Wed, 3 Apr 2013 05:54:08 +0000 (22:54 -0700)]
intel_perf_counters: Add support for Gen7 platforms.
We finally received permission to release this; the counters should be
properly documented in the Haswell PRMs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Daniel Vetter [Thu, 3 Oct 2013 20:45:53 +0000 (22:45 +0200)]
tests/kms_flip: use igt_assert in the dpms helpers
No need to route the error code around really.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 3 Oct 2013 16:30:56 +0000 (18:30 +0200)]
tests/kms_flip: Check the dpms confusion
Some kernels inadvertedly forwarded dpms changes to crtcs connected to
shared encoders even though that specific output wasn't enabled.
Hilarity ensued.
Note that we only have shared encoders on hsw (DP+HDMI) and with sdvo
cards (multi-function encoders).
v2: Do a full OFF->ON->OFF transition to make sure something actually
happens.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 1 Oct 2013 20:20:38 +0000 (22:20 +0200)]
NEWS: testdisplay now with 3d support!
Daniel Vetter [Mon, 30 Sep 2013 19:38:09 +0000 (21:38 +0200)]
tests/kms_flip: scale test runtime
On machines with many outputs and many crtcs it takes too long.
So scale the runtime by the number of output combinations we're trying
to light up.
Compensate the test runtime a bit by doubling most subtests' duration.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 30 Sep 2013 19:35:47 +0000 (21:35 +0200)]
tests/kms_flip: fail harder
At least for pipe A/B we should always fail the test if we can't light
up the preferred mode - the kernel should filter out impossible modes
and for our hw pipe A/B are the least constrained.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Mon, 30 Sep 2013 17:03:33 +0000 (18:03 +0100)]
testdisplay: Print the stereo mode being tested
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Mon, 30 Sep 2013 16:42:33 +0000 (17:42 +0100)]
testdisplay: Make -o and -3 work together
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Mon, 30 Sep 2013 16:41:56 +0000 (17:41 +0100)]
testdisplay: Remove mode resetting now that we don't adjust the timings
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Mon, 30 Sep 2013 16:02:21 +0000 (17:02 +0100)]
testdisplay: Respect specified_disp_id in the stereo loop
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Mon, 30 Sep 2013 15:56:29 +0000 (16:56 +0100)]
testdisplay: Remove printing out the eyes geometry
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Thu, 26 Sep 2013 17:34:06 +0000 (18:34 +0100)]
lib: Adjust dump_modes() to the new stereo encoding
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Thu, 26 Sep 2013 16:56:01 +0000 (17:56 +0100)]
testdisplay: Use DRM_MODE_FLAG_3D_MASK
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Tue, 17 Sep 2013 17:59:52 +0000 (18:59 +0100)]
testdisplay: Remove the timing adjustements now that the kernel does it
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Mon, 16 Sep 2013 16:52:41 +0000 (17:52 +0100)]
intel_infoframe: Display the VIC in decimal
It's not customary to display the VIC in hexadecimal and lead me to
scratch my head for a couple of seconds. Print it in decimal instead.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Mon, 10 Sep 2012 12:33:26 +0000 (13:33 +0100)]
testdisplay: Test the stereo 3D modes
Now that modes have flags to describe which 3d formats the sink
supports, it's time to test them.
The new test cycles through the supported 3D formats and paint 3D
stereoscopic images taken from publicly available samples:
http://www.quantumdata.com/apps/3D/sample_BMP.asp
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 6 Sep 2013 10:44:41 +0000 (11:44 +0100)]
testdisplay: Provide a full path when opening pngs
This way one doesn't have to be in tests/ for testsdisplay to be able to
open pass.png.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Wed, 4 Sep 2013 13:21:55 +0000 (14:21 +0100)]
testdisplay: Free the array of connectors
That's an array we allocated earlier in this function. Let's be symetric
and free it once done.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Thu, 5 Sep 2013 15:49:11 +0000 (16:49 +0100)]
testdisplay: Untangle dump_info() from the main testing loop
-i is just supposed to show some information about the DRM resources.
Right now it works in a quite convoluted way. Untangle this to call
dump_info() when -i is given, exit the program and be done with it.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Wed, 4 Sep 2013 11:31:18 +0000 (12:31 +0100)]
testdisplay: Fix CRTS typo
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Tue, 3 Sep 2013 18:46:19 +0000 (19:46 +0100)]
testdisplay: Properly handle the life cycle of framebuffers
When cycling through the modes, let's make sure to free the previous
framebuffers. This is the perfect occasion to use kmstest_remove_fb().
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Wed, 4 Sep 2013 11:12:37 +0000 (12:12 +0100)]
testdisplay: Map the fb inside paint_color_key()
So the code for this is self-contained. This goes along the way of
reducing the number of global variables in testdisplay.
Take the opportunity to unmap the fb after use as well.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Tue, 3 Sep 2013 13:57:31 +0000 (14:57 +0100)]
testdisplay: Move the code sanitizing depth into main()
It'll be shared by the set_mode() and set_3d_mode() functions.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 6 Sep 2013 17:22:53 +0000 (18:22 +0100)]
lib: Add a helper to write a png from a struct kmstest_fb
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 6 Sep 2013 16:26:32 +0000 (17:26 +0100)]
lib: Split create_image_surface() out of create_cairo_ctx()
So we can use it in the next commit.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 23 Aug 2013 15:46:45 +0000 (16:46 +0100)]
lib: Add a helper to paint a PNG using cairo
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Wed, 12 Sep 2012 13:21:29 +0000 (14:21 +0100)]
lib: Dump information about the supported 3D stereo formats
When dumping the details of a mode, let's add the 3D formats the mode
supports.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 6 Sep 2013 14:17:48 +0000 (15:17 +0100)]
testdisplay: Add left/right images of a lovely scene
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Damien Lespiau [Fri, 6 Sep 2013 14:20:35 +0000 (15:20 +0100)]
testdisplay: Distribute pass.png
Daniel Vetter [Mon, 30 Sep 2013 14:04:38 +0000 (16:04 +0200)]
tests/gem_evict_everything: tune down forked subtests
On new machines with gobloads of memory and cpu cores, but slow swap
on spinning rust we need to limit the runtime a bit for sanity.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 25 Sep 2013 12:36:59 +0000 (14:36 +0200)]
tests: use igt_assert/igt_require more
With the new _f variants we can replace almost all of them.
Also remove a ton of checks for argc != 1, they're a bit useless ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Mon, 23 Sep 2013 20:46:06 +0000 (13:46 -0700)]
intel_l3_parity: Make compilation possible without udev
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Paulo Zanoni [Mon, 23 Sep 2013 19:05:21 +0000 (16:05 -0300)]
tests/pc8: fix supports_pc8_plus_residencies
Bug caused by bad copy+paste+replace.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Chris Wilson [Sun, 22 Sep 2013 18:00:59 +0000 (19:00 +0100)]
overlay: Some very raw usage information
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Daniel Vetter [Sun, 22 Sep 2013 11:15:43 +0000 (13:15 +0200)]
NEWS: Start with release notes for 1.5
Also extend the underlying for 1.4 to the full lenght ;-)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 10 Sep 2013 21:21:23 +0000 (14:21 -0700)]
intel_l3_parity: Support a daemonic mode
v2: Add a comment explaining the dangers of directly accessing the DFT
register (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Tue, 10 Sep 2013 17:40:54 +0000 (10:40 -0700)]
intel_l3_parity: Support error injection
Haswell added the ability to inject errors which is extremely useful for
testing. Add two arguments to the tool to inject, and uninject.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Sun, 8 Sep 2013 03:38:18 +0000 (20:38 -0700)]
intel_l3_parity: Actually support multiple slices
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Sun, 8 Sep 2013 03:10:27 +0000 (20:10 -0700)]
intel_l3_parity: slice support
Haswell GT3 adds a new slice which is kept distinct from the old
register interface. Plumb it into the code, though it's only 1 slice
still.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Sun, 8 Sep 2013 23:50:23 +0000 (16:50 -0700)]
intel_l3_parity: Hardware info argument
Add a new command line argument to the tool which will spit out various
parameters for the giving hardware. As a result of this, some new
defines are added to help with the various info.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Sat, 7 Sep 2013 04:10:50 +0000 (21:10 -0700)]
intel_l3_parity: Use getopt for the l3 parity tool
Add new command line arguments in addition to supporting the old
features. This patch only introduces one feature, the -e argument to
enable a specific row/bank/subbank. Previously you could only enable
all. Otherwise, it has what you expect (we prefer -r -b -s for
specifying the row/bank/subbank).
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Fri, 6 Sep 2013 18:40:03 +0000 (11:40 -0700)]
intel_l3_parity: Assert all GEN7+ support
v2: Don't assert for Valleyview (Bryan)
Rework code to be a bit more readable.
CC: "Bell, Bryan J" <bryan.j.bell@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Ben Widawsky [Tue, 10 Sep 2013 22:34:54 +0000 (15:34 -0700)]
intel_l3_parity: Fix indentation
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Daniel Vetter [Thu, 19 Sep 2013 17:56:03 +0000 (19:56 +0200)]
lib/drmtest: Improve printf-like igt_skip_on/require
Ben Widawsky suggested to use vasprintf, which perfectly fits the bill.
Also fix the logic conversion bug in tests/gem_storedw_batches_loop that
crept in again :(
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>