review.tizen.org Git - platform/kernel/linux-rpi.git/log

drm/mipi_dbi: Fix off-by-one bugs in mipi_dbi_blank()

[ Upstream commit 2ce18249af5a28031b3f909cfafccc88ea966c9d ]

When configuring the frame memory window, the last column and row
numbers are written to the column resp. page address registers. These
numbers are thus one less than the actual window width resp. height.

While this is handled correctly in mipi_dbi_fb_dirty() since commit
03ceb1c8dfd1e293 ("drm/tinydrm: Fix setting of the column/page end
addresses."), it is not in mipi_dbi_blank(). The latter still forgets
to subtract one when calculating the most significant bytes of the
column and row numbers, thus programming wrong values when the display
width or height is a multiple of 256.

Fixes: 02dd95fe31693626 ("drm/tinydrm: Add MIPI DBI support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230130604.31006-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: fix exclusive_console replaying

[ Upstream commit def97da136515cb289a14729292c193e0a93bc64 ]

Commit f92b070f2dc8 ("printk: Do not miss new messages when replaying
the log") introduced a new variable @exclusive_console_stop_seq to
store when an exclusive console should stop printing. It should be
set to the @console_seq value at registration. However, @console_seq
is previously set to @syslog_seq so that the exclusive console knows
where to begin. This results in the exclusive console immediately
reactivating all the other consoles and thus repeating the messages
for those consoles.

Set @console_seq after @exclusive_console_stop_seq has stored the
current @console_seq value.

Fixes: f92b070f2dc8 ("printk: Do not miss new messages when replaying the log")
Link: http://lkml.kernel.org/r/20191219115322.31160-1-john.ogness@linutronix.de
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs

[ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
two CAN outputs.

Fix this by:
  - Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010
    configures the combined "CTX0&CTX1" output signal,
  - Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures
    the shared "CRX0/CRX1" input signal, which is fed to both CAN
    inputs,
  - Adding the missing function GPIO definition for "CTX0&CTX1" to
    pinmux_func_gpios[],
  - Moving all CAN enums next to each other.

See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00:
  [1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte
      Version),
  [2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte
      Version,
  [3] Table 1.4 List of Pins,
  [4] Figure 20.29 Connection Example when Using This Module as 1-Channel
      Module (64 Mailboxes x 1 Channel),
  [5] Table 32.10 Multiplexed Pins (Port J),
  [6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0).

Note that the last 2 disagree about PJ2MD[2:0], which is probably the
root cause of this bug.  But considering [4], "CTx0&CTx1" in [5] must
be correct, and "CRx0&CRx1" in [6] must be wrong.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

gianfar: Fix TX timestamping with a stacked DSA driver

[ Upstream commit c26a2c2ddc0115eb088873f5c309cf46b982f522 ]

The driver wrongly assumes that it is the only entity that can set the
SKBTX_IN_PROGRESS bit of the current skb. Therefore, in the
gfar_clean_tx_ring function, where the TX timestamp is collected if
necessary, the aforementioned bit is used to discriminate whether or not
the TX timestamp should be delivered to the socket's error queue.

But a stacked driver such as a DSA switch can also set the
SKBTX_IN_PROGRESS bit, which is actually exactly what it should do in
order to denote that the hardware timestamping process is undergoing.

Therefore, gianfar would misinterpret the "in progress" bit as being its
own, and deliver a second skb clone in the socket's error queue,
completely throwing off a PTP process which is not expecting to receive
it, _even though_ TX timestamping is not enabled for gianfar.

There have been discussions [0] as to whether non-MAC drivers need or
not to set SKBTX_IN_PROGRESS at all (whose purpose is to avoid sending 2
timestamps, a sw and a hw one, to applications which only expect one).
But as of this patch, there are at least 2 PTP drivers that would break
in conjunction with gianfar: the sja1105 DSA switch and the felix
switch, by way of its ocelot core driver.

So regardless of that conclusion, fix the gianfar driver to not do stuff
based on flags set by others and not intended for it.

[0]: https://www.spinics.net/lists/netdev/msg619699.html

Fixes: f0ee7acfcdd4 ("gianfar: Add hardware TX timestamping support")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: ctl: allow TLV read operation for callback type of element in locked case

[ Upstream commit d61fe22c2ae42d9fd76c34ef4224064cca4b04b0 ]

A design of ALSA control core allows applications to execute three
operations for TLV feature; read, write and command. Furthermore, it
allows driver developers to process the operations by two ways; allocated
array or callback function. In the former, read operation is just allowed,
thus developers uses the latter when device driver supports variety of
models or the target model is expected to dynamically change information
stored in TLV container.

The core also allows applications to lock any element so that the other
applications can't perform write operation to the element for element
value and TLV information. When the element is locked, write and command
operation for TLV information are prohibited as well as element value.
Any read operation should be allowed in the case.

At present, when an element has callback function for TLV information,
TLV read operation returns EPERM if the element is locked. On the
other hand, the read operation is success when an element has allocated
array for TLV information. In both cases, read operation is success for
element value expectedly.

This commit fixes the bug. This change can be backported to v4.14
kernel or later.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20191223093347.15279-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix ext4_dax_read/write inode locking sequence for IOCB_NOWAIT

[ Upstream commit f629afe3369e9885fd6e9cc7a4f514b6a65cf9e9 ]

Apparently our current rwsem code doesn't like doing the trylock, then
lock for real scheme. So change our dax read/write methods to just do the
trylock for the RWF_NOWAIT case.
This seems to fix AIM7 regression in some scalable filesystems upto ~25%
in some cases. Claimed in commit 942491c9e6d6 ("xfs: fix AIM7 regression")

Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20191212055557.11151-2-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: pca963x: Fix open-drain initialization

[ Upstream commit 697529091ac7a0a90ca349b914bb30641c13c753 ]

Before commit bb29b9cccd95 ("leds: pca963x: Add bindings to invert
polarity") Mode register 2 was initialized directly with either 0x01
or 0x05 for open-drain or totem pole (push-pull) configuration.

Afterwards, MODE2 initialization started using bitwise operations on
top of the default MODE2 register value (0x05). Using bitwise OR for
setting OUTDRV with 0x01 and 0x05 does not produce correct results.
When open-drain is used, instead of setting OUTDRV to 0, the driver
keeps it as 1:

Open-drain: 0x05 | 0x01 -> 0x05 (0b101 - incorrect)
Totem pole: 0x05 | 0x05 -> 0x05 (0b101 - correct but still wrong)

Now OUTDRV setting uses correct bitwise operations for initialization:

Open-drain: 0x05 & ~0x04 -> 0x01 (0b001 - correct)
Totem pole: 0x05 | 0x04 -> 0x05 (0b101 - correct)

Additional MODE2 register definitions are introduced now as well.

Fixes: bb29b9cccd95 ("leds: pca963x: Add bindings to invert polarity")
Signed-off-by: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Map ODM memory correctly when doing ODM combine

[ Upstream commit ec5b356c58941bb8930858155d9ce14ceb3d30a0 ]

[why]
Up to 4 ODM memory pieces are required per ODM combine and cannot
overlap, i.e. each ODM "session" has to use its own memory pieces.
The ODM-memory mapping is currently broken for generic case.

The maximum number of memory pieces is ASIC-dependent, but it's always
big enough to satisfy maximum number of ODM combines. Memory pieces
are mapped as a bit-map, i.e. one memory piece corresponds to one bit.
The OPTC doing ODM needs to select memory pieces by setting the
corresponding bits, making sure there's no overlap with other OPTC
instances that might be doing ODM.

The current mapping works only for OPTC instance indexes smaller than
3. For instance indexes 3 and up it practically maps no ODM memory,
causing black, gray or white screen in display configs that include
ODM on OPTC instance 3 or up.

[how]
Statically map two unique ODM memory pieces for each OPTC instance
and piece them together when programming ODM combine mode.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Fix pci_add_dma_alias() bitmask size

[ Upstream commit f8bf2aeb651b3460a4b36fd7ba1ba1d31777d35c ]

The number of possible devfns is 256, but pci_add_dma_alias() allocated a
bitmap of size 255. Fix this off-by-one error.

This fixes commits 338c3149a221 ("PCI: Add support for multiple DMA
aliases") and c6635792737b ("PCI: Allocate dma_alias_mask with
bitmap_zalloc()"), but I doubt it was possible to see a problem because
it takes 4 64-bit longs (or 8 32-bit longs) to hold 255 bits, and
bitmap_zalloc() doesn't save the 255-bit size anywhere.

[bhelgaas: commit log, move #define to drivers/pci/pci.h, include loop
limit fix from Qian Cai:
https://lore.kernel.org/r/20191218170004.5297-1-cai@lca.pw]
Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: Fix use after free in brcmf_sdio_readframes()

[ Upstream commit 216b44000ada87a63891a8214c347e05a4aea8fe ]

The brcmu_pkt_buf_free_skb() function frees "pkt" so it leads to a
static checker warning:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1974 brcmf_sdio_readframes()
error: dereferencing freed memory 'pkt'

It looks like there was supposed to be a continue after we free "pkt".

Fixes: 4754fceeb9a6 ("brcmfmac: streamline SDIO read frame routine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: Fix memory leak in brcmf_p2p_create_p2pdev()

[ Upstream commit 5cc509aa83c6acd2c5cd94f99065c39d2bd0a490 ]

In the implementation of brcmf_p2p_create_p2pdev() the allocated memory
for p2p_vif is leaked when the mac address is the same as primary
interface. To fix this, go to error path to release p2p_vif via
brcmf_free_vif().

Fixes: cb746e47837a ("brcmfmac: check p2pdev mac address uniqueness")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpu/hotplug, stop_machine: Fix stop_machine vs hotplug order

[ Upstream commit 45178ac0cea853fe0e405bf11e101bdebea57b15 ]

Paul reported a very sporadic, rcutorture induced, workqueue failure.
When the planets align, the workqueue rescuer's self-migrate fails and
then triggers a WARN for running a work on the wrong CPU.

Tejun then figured that set_cpus_allowed_ptr()'s stop_one_cpu() call
could be ignored! When stopper->enabled is false, stop_machine will
insta complete the work, without actually doing the work. Worse, it
will not WARN about this (we really should fix this).

It turns out there is a small window where a freshly online'ed CPU is
marked 'online' but doesn't yet have the stopper task running:

BP AP

bringup_cpu()
  __cpu_up(cpu, idle) --> start_secondary()
...
cpu_startup_entry()
  bringup_wait_for_ap()
    wait_for_ap_thread() <--   cpuhp_online_idle()
  while (1)
    do_idle()

... available to run kthreads ...

    stop_machine_unpark()
      stopper->enable = true;

Close this by moving the stop_machine_unpark() into
cpuhp_online_idle(), such that the stopper thread is ready before we
start the idle loop and schedule.

Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Debugged-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: meson: pll: Fix by 0 division in __pll_params_to_rate()

[ Upstream commit d8488a41800d9f5c80bc0d17b9cc2c91b4841464 ]

Some meson pll registers can be initialized with 0 as N value, introducing
the following division by 0 when computing rate :

  UBSAN: Undefined behaviour in drivers/clk/meson/clk-pll.c:75:9
  division by zero
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc3-608075-g86c9af8630e1-dirty #400
  Call trace:
   dump_backtrace+0x0/0x1c0
   show_stack+0x14/0x20
   dump_stack+0xc4/0x100
   ubsan_epilogue+0x14/0x68
   __ubsan_handle_divrem_overflow+0x98/0xb8
   __pll_params_to_rate+0xdc/0x140
   meson_clk_pll_recalc_rate+0x278/0x3a0
   __clk_register+0x7c8/0xbb0
   devm_clk_hw_register+0x54/0xc0
   meson_eeclkc_probe+0xf4/0x1a0
   platform_drv_probe+0x54/0xd8
   really_probe+0x16c/0x438
   driver_probe_device+0xb0/0xf0
   device_driver_attach+0x94/0xa0
   __driver_attach+0x70/0x108
   bus_for_each_dev+0xd8/0x128
   driver_attach+0x30/0x40
   bus_add_driver+0x1b0/0x2d8
   driver_register+0xbc/0x1d0
   __platform_driver_register+0x78/0x88
   axg_driver_init+0x18/0x20
   do_one_initcall+0xc8/0x24c
   kernel_init_freeable+0x2b0/0x344
   kernel_init+0x10/0x128
   ret_from_fork+0x10/0x18

This checks if N is null before doing the division.

Fixes: 7a29a869434e ("clk: meson: Add support for Meson clock controller")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
[jbrunet@baylibre.com: update the comment in above the fix]
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: meson: add missing allocation failure check on new_buf

[ Upstream commit 11e0e167d071a28288a7a0a211d48c571d19b56f ]

Currently if the allocation of new_buf fails then a null pointer
dereference occurs when assiging new_buf->vb. Avoid this by returning
early on a memory allocation failure as there is not much more can
be done at this point.

Addresses-Coverity: ("Dereference null return")

Fixes: 3e7f51bd9607 ("media: meson: add v4l2 m2m video decoder driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: call f2fs_balance_fs outside of locked page

[ Upstream commit bdf03299248916640a835a05d32841bb3d31912d ]

Otherwise, we can hit deadlock by waiting for the locked page in
move_data_block in GC.

Thread A                     Thread B
- do_page_mkwrite
  - f2fs_vm_page_mkwrite
   - lock_page
                              - f2fs_balance_fs
                                  - mutex_lock(gc_mutex)
                               - f2fs_gc
                                - do_garbage_collect
                                 - ra_data_block
                                  - grab_cache_page
   - f2fs_balance_fs
    - mutex_lock(gc_mutex)

Fixes: 39a8695824510 ("f2fs: refactor ->page_mkwrite() flow")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: preallocate DIO blocks when forcing buffered_io

[ Upstream commit 47501f87c61ad2aa234add63e1ae231521dbc3f5 ]

The previous preallocation and DIO decision like below.

                         allow_outplace_dio              !allow_outplace_dio
f2fs_force_buffered_io   (*) No_Prealloc / Buffered_IO   Prealloc / Buffered_IO
!f2fs_force_buffered_io  No_Prealloc / DIO               Prealloc / DIO

But, Javier reported Case (*) where zoned device bypassed preallocation but
fell back to buffered writes in f2fs_direct_IO(), resulting in stale data
being read.

In order to fix the issue, actually we need to preallocate blocks whenever
we fall back to buffered IO like this. No change is made in the other cases.

                         allow_outplace_dio              !allow_outplace_dio
f2fs_force_buffered_io   (*) Prealloc / Buffered_IO      Prealloc / Buffered_IO
!f2fs_force_buffered_io  No_Prealloc / DIO               Prealloc / DIO

Reported-and-tested-by: Javier Gonzalez <javier@javigon.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Fix data-race due to atomic_t copy-by-value

[ Upstream commit 6cf539a87a61a4fbc43f625267dbcbcf283872ed ]

This fixes a data-race where `atomic_t dynticks` is copied by value. The
copy is performed non-atomically, resulting in a data-race if `dynticks`
is updated concurrently.

This data-race was found with KCSAN:
==================================================================
BUG: KCSAN: data-race in dyntick_save_progress_counter / rcu_irq_enter

write to 0xffff989dbdbe98e0 of 4 bytes by task 10 on cpu 3:
atomic_add_return include/asm-generic/atomic-instrumented.h:78 [inline]
rcu_dynticks_snap kernel/rcu/tree.c:310 [inline]
dyntick_save_progress_counter+0x43/0x1b0 kernel/rcu/tree.c:984
force_qs_rnp+0x183/0x200 kernel/rcu/tree.c:2286
rcu_gp_fqs kernel/rcu/tree.c:1601 [inline]
rcu_gp_fqs_loop+0x71/0x880 kernel/rcu/tree.c:1653
rcu_gp_kthread+0x22c/0x3b0 kernel/rcu/tree.c:1799
kthread+0x1b5/0x200 kernel/kthread.c:255
<snip>

read to 0xffff989dbdbe98e0 of 4 bytes by task 154 on cpu 7:
rcu_nmi_enter_common kernel/rcu/tree.c:828 [inline]
rcu_irq_enter+0xda/0x240 kernel/rcu/tree.c:870
irq_enter+0x5/0x50 kernel/softirq.c:347
<snip>

Reported by Kernel Concurrency Sanitizer on:
CPU: 7 PID: 154 Comm: kworker/7:1H Not tainted 5.3.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: kblockd blk_mq_run_work_fn
==================================================================

Signed-off-by: Marco Elver <elver@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: rcu@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Fix missed wakeup of exp_wq waiters

[ Upstream commit fd6bc19d7676a060a171d1cf3dcbf6fd797eb05f ]

Tasks waiting within exp_funnel_lock() for an expedited grace period to
elapse can be starved due to the following sequence of events:

1. Tasks A and B both attempt to start an expedited grace
period at about the same time. This grace period will have
completed when the lower four bits of the rcu_state structure's
->expedited_sequence field are 0b'0100', for example, when the
initial value of this counter is zero. Task A wins, and thus
does the actual work of starting the grace period, including
acquiring the rcu_state structure's .exp_mutex and sets the
counter to 0b'0001'.

2. Because task B lost the race to start the grace period, it
waits on ->expedited_sequence to reach 0b'0100' inside of
exp_funnel_lock(). This task therefore blocks on the rcu_node
structure's ->exp_wq[1] field, keeping in mind that the
end-of-grace-period value of ->expedited_sequence (0b'0100')
is shifted down two bits before indexing the ->exp_wq[] field.

3. Task C attempts to start another expedited grace period,
but blocks on ->exp_mutex, which is still held by Task A.

4. The aforementioned expedited grace period completes, so that
->expedited_sequence now has the value 0b'0100'.  A kworker task
therefore acquires the rcu_state structure's ->exp_wake_mutex
and starts awakening any tasks waiting for this grace period.

5. One of the first tasks awakened happens to be Task A.  Task A
therefore releases the rcu_state structure's ->exp_mutex,
which allows Task C to start the next expedited grace period,
which causes the lower four bits of the rcu_state structure's
->expedited_sequence field to become 0b'0101'.

6. Task C's expedited grace period completes, so that the lower four
bits of the rcu_state structure's ->expedited_sequence field now
become 0b'1000'.

7. The kworker task from step 4 above continues its wakeups.
Unfortunately, the wake_up_all() refetches the rcu_state
structure's .expedited_sequence field:

wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rcu_state.expedited_sequence) & 0x3]);

This results in the wakeup being applied to the rcu_node
structure's ->exp_wq[2] field, which is unfortunate given that
Task B is instead waiting on ->exp_wq[1].

On a busy system, no harm is done (or at least no permanent harm is done).
Some later expedited grace period will redo the wakeup.  But on a quiet
system, such as many embedded systems, it might be a good long time before
there was another expedited grace period.  On such embedded systems,
this situation could therefore result in a system hang.

This issue manifested as DPM device timeout during suspend (which
usually qualifies as a quiet time) due to a SCSI device being stuck in
_synchronize_rcu_expedited(), with the following stack trace:

schedule()
synchronize_rcu_expedited()
synchronize_rcu()
scsi_device_quiesce()
scsi_bus_suspend()
dpm_run_callback()
__device_suspend()

This commit therefore prevents such delays, timeouts, and hangs by
making rcu_exp_wait_wake() use its "s" argument consistently instead of
refetching from rcu_state.expedited_sequence.

Fixes: 3b5f668e715b ("rcu: Overlap wakeups with next expedited grace period")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu/nocb: Fix dump_tree hierarchy print always active

[ Upstream commit 610dea36d3083a977e4f156206cbe1eaa2a532f0 ]

Commit 18cd8c93e69e ("rcu/nocb: Print gp/cb kthread hierarchy if
dump_tree") added print statements to rcu_organize_nocb_kthreads for
debugging, but incorrectly guarded them, causing the function to always
spew out its message.

This patch fixes it by guarding both pr_alert statements with dump_tree,
while also changing the second pr_alert to a pr_cont, to print the
hierarchy in a single line (assuming that's how it was supposed to
work).

Fixes: 18cd8c93e69e ("rcu/nocb: Print gp/cb kthread hierarchy if dump_tree")
Signed-off-by: Stefan Reiter <stefan@pimaker.at>
[ paulmck: Make single-nocbs-CPU GP kthreads look less erroneous. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/qxl: Complete exception handling in qxl_device_init()

[ Upstream commit dbe3ad61dcebc49fe3efca70a0f752a95b4600f2 ]

A coccicheck run provided information like the following.

drivers/gpu/drm/qxl/qxl_kms.c:295:1-7: ERROR: missing iounmap;
ioremap on line 178 and execution via conditional on line 185

Generated by: scripts/coccinelle/free/iounmap.cocci

A jump target was specified in an if branch. The corresponding function
call did not release the desired system resource then.
Thus use the label “rom_unmap” instead to fix the exception handling
for this function implementation.

Fixes: 5043348a4969ae1661c008efe929abd0d76e3792 ("drm: qxl: Fix error handling at qxl_device_init")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: http://patchwork.freedesktop.org/patch/msgid/5e5ef9c4-4d85-3c93-cf28-42cfcb5b0649@web.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wil6210: fix break that is never reached because of zero'ing of a retry counter

[ Upstream commit 5b1413f00b5beb9f5fed94e43ea0c497d5db9633 ]

There is a check on the retry counter invalid_buf_id_retry that is always
false because invalid_buf_id_retry is initialized to zero on each iteration
of a while-loop. Fix this by initializing the retry counter before the
while-loop starts.

Addresses-Coverity: ("Logically dead code")
Fixes: b4a967b7d0f5 ("wil6210: reset buff id in status message after completion")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Fix qmi init error handling

[ Upstream commit f8a595a87e93a33a10879f4b856be818d2f53c84 ]

When ath10k_qmi_init() fails, the error handling does not free the irq
resources, which causes an issue if we EPROBE_DEFER as we'll attempt to
(re-)register irqs which are already registered.

Fix this by doing a power off since we just powered on the hardware, and
freeing the irqs as error handling.

Fixes: ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/gma500: Fixup fbdev stolen size usage evaluation

[ Upstream commit fd1a5e521c3c083bb43ea731aae0f8b95f12b9bd ]

psbfb_probe performs an evaluation of the required size from the stolen
GTT memory, but gets it wrong in two distinct ways:
- The resulting size must be page-size-aligned;
- The size to allocate is derived from the surface dimensions, not the fb
dimensions.

When two connectors are connected with different modes, the smallest will
be stored in the fb dimensions, but the size that needs to be allocated must
match the largest (surface) dimensions. This is what is used in the actual
allocation code.

Fix this by correcting the evaluation to conform to the two points above.
It allows correctly switching to 16bpp when one connector is e.g. 1920x1080
and the other is 1024x768.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107153048.843881-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: flower: add missing validation of TCA_FLOWER_FLAGS

[ Upstream commit e2debf0852c4d66ba1a8bde12869b196094c70a7 ]

unlike other classifiers that can be offloaded (i.e. users can set flags
like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of
netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry
to fl_policy.

Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS

[ Upstream commit 1afa3cc90f8fb745c777884d79eaa1001d6927a6 ]

unlike other classifiers that can be offloaded (i.e. users can set flags
like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size
of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper
entry to mall_policy.

Fixes: b87f7936a932 ("net/sched: Add match-all classifier hw offloading.")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: tag_qca: Make sure there is headroom for tag

[ Upstream commit 04fb91243a853dbde216d829c79d9632e52aa8d9 ]

Passing tag size to skb_cow_head will make sure
there is enough headroom for the tag data.
This change does not introduce any overhead in case there
is already available headroom for tag.

Signed-off-by: Per Forlin <perfn@axis.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: fix leak of kernel memory to user space

[ Upstream commit 457fed775c97ac2c0cd1672aaf2ff2c8a6235e87 ]

As nlmsg_put() does not clear the memory that is reserved,
it this the caller responsability to make sure all of this
memory will be written, in order to not reveal prior content.

While we are at it, we can provide the socket cookie even
if clsock is not set.

syzbot reported :

BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline]
BUG: KMSAN: uninit-value in __swab32p include/uapi/linux/swab.h:179 [inline]
BUG: KMSAN: uninit-value in __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
BUG: KMSAN: uninit-value in get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
BUG: KMSAN: uninit-value in bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252
CPU: 1 PID: 5262 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
__arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
__fswab32 include/uapi/linux/swab.h:59 [inline]
__swab32p include/uapi/linux/swab.h:179 [inline]
__be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
kmsan_kmalloc_large+0x73/0xc0 mm/kmsan/kmsan_hooks.c:128
kmalloc_large_node_hook mm/slub.c:1406 [inline]
kmalloc_large_node+0x282/0x2c0 mm/slub.c:3841
__kmalloc_node_track_caller+0x44b/0x1200 mm/slub.c:4368
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_dump+0x44b/0x1ab0 net/netlink/af_netlink.c:2224
__netlink_dump_start+0xbb2/0xcf0 net/netlink/af_netlink.c:2352
netlink_dump_start include/linux/netlink.h:233 [inline]
smc_diag_handler_dump+0x2ba/0x300 net/smc/smc_diag.c:242
sock_diag_rcv_msg+0x211/0x610 net/core/sock_diag.c:256
netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
kernel_sendmsg+0x433/0x440 net/socket.c:679
sock_no_sendpage+0x235/0x300 net/core/sock.c:2740
kernel_sendpage net/socket.c:3776 [inline]
sock_sendpage+0x1e1/0x2c0 net/socket.c:937
pipe_to_sendpage+0x38c/0x4c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x539/0xed0 fs/splice.c:636
splice_from_pipe fs/splice.c:671 [inline]
generic_splice_sendpage+0x1d5/0x2d0 fs/splice.c:844
do_splice_from fs/splice.c:863 [inline]
do_splice fs/splice.c:1170 [inline]
__do_sys_splice fs/splice.c:1447 [inline]
__se_sys_splice+0x2380/0x3350 fs/splice.c:1427
__x64_sys_splice+0x6e/0x90 fs/splice.c:1427
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

enic: prevent waking up stopped tx queues over watchdog reset

[ Upstream commit 0f90522591fd09dd201065c53ebefdfe3c6b55cb ]

Recent months, our customer reported several kernel crashes all
preceding with following message:
NETDEV WATCHDOG: eth2 (enic): transmit queue 0 timed out
Error message of one of those crashes:
BUG: unable to handle kernel paging request at ffffffffa007e090

After analyzing severl vmcores, I found that most of crashes are
caused by memory corruption. And all the corrupted memory areas
are overwritten by data of network packets. Moreover, I also found
that the tx queues were enabled over watchdog reset.

After going through the source code, I found that in enic_stop(),
the tx queues stopped by netif_tx_disable() could be woken up over
a small time window between netif_tx_disable() and the
napi_disable() by the following code path:
napi_poll->
  enic_poll_msix_wq->
     vnic_cq_service->
        enic_wq_service->
           netif_wake_subqueue(enic->netdev, q_number)->
              test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state)
In turn, upper netowrk stack could queue skb to ENIC NIC though
enic_hard_start_xmit(). And this might introduce some race condition.

Our customer comfirmed that this kind of kernel crash doesn't occur over
90 days since they applied this patch.

Signed-off-by: Firo Yang <firo.yang@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

core: Don't skip generic XDP program execution for cloned SKBs

[ Upstream commit ad1e03b2b3d4430baaa109b77bc308dc73050de3 ]

The current generic XDP handler skips execution of XDP programs entirely if
an SKB is marked as cloned. This leads to some surprising behaviour, as
packets can end up being cloned in various ways, which will make an XDP
program not see all the traffic on an interface.

This was discovered by a simple test case where an XDP program that always
returns XDP_DROP is installed on a veth device. When combining this with
the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending
side, SKBs reliably end up in the cloned state, causing them to be passed
through to the receiving interface instead of being dropped. A minimal
reproducer script for this is included below.

This patch fixed the issue by simply triggering the existing linearisation
code for cloned SKBs instead of skipping the XDP program execution. This
behaviour is in line with the behaviour of the native XDP implementation
for the veth driver, which will reallocate and copy the SKB data if the SKB
is marked as shared.

Reproducer Python script (requires BCC and Scapy):

from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP
from bcc import BPF
import time, sys, subprocess, shlex

SKB_MODE = (1 << 1)
DRV_MODE = (1 << 2)
PYTHON=sys.executable

def client():
    time.sleep(2)
    # Sniffing on the sender causes skb_cloned() to be set
    s = AsyncSniffer()
    s.start()

    for p in range(10):
        sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"),
              verbose=False)
        time.sleep(0.1)

    s.stop()
    return 0

def server(mode):
    prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}")
    func = prog.load_func("dummy_drop", BPF.XDP)
    prog.attach_xdp("a_to_b", func, mode)

    time.sleep(1)

    s = sniff(iface="a_to_b", count=10, timeout=15)
    if len(s):
        print(f"Got {len(s)} packets - should have gotten 0")
        return 1
    else:
        print("Got no packets - as expected")
        return 0

if len(sys.argv) < 2:
    print(f"Usage: {sys.argv[0]} <skb|drv>")
    sys.exit(1)

if sys.argv[1] == "client":
    sys.exit(client())
elif sys.argv[1] == "server":
    mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE
    sys.exit(server(mode))
else:
    try:
        mode = sys.argv[1]
        if mode not in ('skb', 'drv'):
            print(f"Usage: {sys.argv[0]} <skb|drv>")
            sys.exit(1)
        print(f"Running in {mode} mode")

        for cmd in [
                'ip netns add netns_a',
                'ip netns add netns_b',
                'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b',
                # Disable ipv6 to make sure there's no address autoconf traffic
                'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1',
                'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1',
                'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa',
                'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc',
                'ip -n netns_a link set dev a_to_b up',
                'ip -n netns_b link set dev b_to_a up']:
            subprocess.check_call(shlex.split(cmd))

        server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}"))
        client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client"))

        client.wait()
        server.wait()
        sys.exit(server.returncode)

    finally:
        subprocess.run(shlex.split("ip netns delete netns_a"))
        subprocess.run(shlex.split("ip netns delete netns_b"))

Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices")
Reported-by: Stepan Horacek <shoracek@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.21

mmc: core: Rework wp-gpio handling

[ Upstream commit 9073d10b098973519044f5fcdc25586810b435da ]

Use MMC_CAP2_RO_ACTIVE_HIGH flag as indicator if GPIO line is to be
inverted compared to DT/platform-specified polarity. The flag is not used
after init in GPIO mode anyway. No functional changes intended.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/a60f563f11bbff821da2fa2949ca82922b144860.1576031637.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: add gpiod_toggle_active_low()

[ Upstream commit d3a5bcb4a17f1ad072484bb92c42519ff3aba6e1 ]

Add possibility to toggle active-low flag of a gpio descriptor. This is
useful for compatibility code, where defaults are inverted vs DT gpio
flags or the active-low flag is taken from elsewhere.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/7ce0338e01ad17fa5a227176813941b41a7c35c1.1576031637.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: Fix struct guest_walker arrays for 5-level paging

[ Upstream commit f6ab0107a4942dbf9a5cf0cca3f37e184870a360 ]

Define PT_MAX_FULL_LEVELS as PT64_ROOT_MAX_LEVEL, i.e. 5, to fix shadow
paging for 5-level guest page tables. PT_MAX_FULL_LEVELS is used to
size the arrays that track guest pages table information, i.e. using a
"max levels" of 4 causes KVM to access garbage beyond the end of an
array when querying state for level 5 entries. E.g. FNAME(gpte_changed)
will read garbage and most likely return %true for a level 5 entry,
soft-hanging the guest because FNAME(fetch) will restart the guest
instead of creating SPTEs because it thinks the guest PTE has changed.

Note, KVM doesn't yet support 5-level nested EPT, so PT_MAX_FULL_LEVELS
gets to stay "4" for the PTTYPE_EPT case.

Fixes: 855feb673640 ("KVM: MMU: Add 5 level EPT & Shadow page table support.")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: choose hardlimit when softlimit is larger than hardlimit in ext4_statfs_project()

[ Upstream commit 57c32ea42f8e802bda47010418e25043e0c9337f ]

Setting softlimit larger than hardlimit seems meaningless
for disk quota but currently it is allowed. In this case,
there may be a bit of comfusion for users when they run
df comamnd to directory which has project quota.

For example, we set 20M softlimit and 10M hardlimit of
block usage limit for project quota of test_dir(project id 123).

[root@hades mnt_ext4]# repquota -P -a
*** Report for project quotas on device /dev/loop0
Block grace time: 7days; Inode grace time: 7days
                        Block limits                File limits
Project         used    soft    hard  grace    used  soft  hard  grace
----------------------------------------------------------------------
0        --      13       0       0              2     0     0
123      --   10237   20480   10240              5   200   100

The result of df command as below:

[root@hades mnt_ext4]# df -h test_dir
Filesystem      Size  Used Avail Use% Mounted on
/dev/loop0       20M   10M   10M  50% /home/cgxu/test/mnt_ext4

Even though it looks like there is another 10M free space to use,
if we write new data to diretory test_dir(inherit project id),
the write will fail with errno(-EDQUOT).

After this patch, the df result looks like below.

[root@hades mnt_ext4]# df -h test_dir
Filesystem      Size  Used Avail Use% Mounted on
/dev/loop0       10M   10M  3.0K 100% /home/cgxu/test/mnt_ext4

Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191016022501.760-1-cgxu519@mykernel.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer

[ Upstream commit c96dceeabf765d0b1b1f29c3bf50a5c01315b820 ]

Commit 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from
an older transaction") set the BH_Freed flag when forgetting a metadata
buffer which belongs to the committing transaction, it indicate the
committing process clear dirty bits when it is done with the buffer. But
it also clear the BH_Mapped flag at the same time, which may trigger
below NULL pointer oops when block_size < PAGE_SIZE.

rmdir 1             kjournald2                 mkdir 2
                    jbd2_journal_commit_transaction
    commit transaction N
jbd2_journal_forget
set_buffer_freed(bh1)
                    jbd2_journal_commit_transaction
                     commit transaction N+1
                     ...
                     clear_buffer_mapped(bh1)
                                               ext4_getblk(bh2 ummapped)
                                               ...
                                               grow_dev_page
                                                init_page_buffers
                                                 bh1->b_private=NULL
                                                 bh2->b_private=NULL
                     jbd2_journal_put_journal_head(jh1)
                      __journal_remove_journal_head(hb1)
       jh1 is NULL and trigger oops

*) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has
   already been unmapped.

For the metadata buffer we forgetting, we should always keep the mapped
flag and clear the dirty flags is enough, so this patch pick out the
these buffers and keep their BH_Mapped flag.

Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com
Fixes: 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()

[ Upstream commit 6a66a7ded12baa6ebbb2e3e82f8cb91382814839 ]

There is no need to delay the clearing of b_modified flag to the
transaction committing time when unmapping the journalled buffer, so
just move it to the journal_unmap_buffer().

Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "drm/sun4i: drv: Allow framebuffer modifiers in mode config"

commit cf913e9683273f2640501094fa63a67e29f437b3 upstream.

This reverts commit 9db9c0cf5895e4ddde2814360cae7bea9282edd2.

Setting mode_config.allow_fb_modifiers manually is completely
unnecessary. It is set automatically by drm_universal_plane_init() based
on the fact if modifier list is provided or not. Even more, it breaks
DE2 and DE3 as they don't support any modifiers beside linear. Modifiers
aware applications can be confused by provided empty modifier list - at
least linear modifier should be included, but it's not for DE2 and DE3.

Fixes: 9db9c0cf5895 ("drm/sun4i: drv: Allow framebuffer modifiers in mode config")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200126065937.9564-1-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.1 make cachethis=no for writes

commit cd1b659d8ce7697ee9799b64f887528315b9097b upstream.

Turning caching off for writes on the server should improve performance.

Fixes: fba83f34119a ("NFS: Pass "privileged" value to nfs4_init_sequence()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf stat: Don't report a null stalled cycles per insn metric

commit 80cc7bb6c104d733bff60ddda09f19139c61507c upstream.

For data collected on machines with front end stalled cycles supported,
such as found on modern AMD CPU families, commit 146540fb545b ("perf
stat: Always separate stalled cycles per insn") introduces a new line in
CSV output with a leading comma that upsets some automated scripts.
Scripts have to use "-e ex_ret_instr" to work around this issue, after
upgrading to a version of perf with that commit.

We could add "if (have_frontend_stalled && !config->csv_sep)" to the not
(total && avg) else clause, to emphasize that CSV users are usually
scripts, and are written to do only what is needed, i.e., they wouldn't
typically invoke "perf stat" without specifying an explicit event list.

But - let alone CSV output - why should users now tolerate a constant
0-reporting extra line in regular terminal output?:

BEFORE:

$ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1

Performance counter stats for 'system wide':

       181,110,981      instructions              #    0.58  insn per cycle
                                                  #    0.00  stalled cycles per insn
       309,876,469      cycles

       1.002202582 seconds time elapsed

The user would not like to see the now permanent:

  "0.00  stalled cycles per insn"

line fixture, as it gives no useful information.

So this patch removes the printing of the zeroed stalled cycles line
altogether, almost reverting the very original commit fb4605ba47e7
("perf stat: Check for frontend stalled for metrics"), which seems like
it was written to normalize --metric-only column output of common Intel
machines at the time: modern Intel machines have ceased to support the
genericised frontend stalled metrics AFAICT.

AFTER:

$ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1

Performance counter stats for 'system wide':

       244,071,432      instructions              #    0.69  insn per cycle
       355,353,490      cycles

       1.001862516 seconds time elapsed

Output behaviour when stalled cycles is indeed measured is not affected
(BEFORE == AFTER):

$ sudo perf stat --all-cpus -einstructions,cycles,stalled-cycles-frontend -- sleep 1

Performance counter stats for 'system wide':

       247,227,799      instructions              #    0.63  insn per cycle
                                                  #    0.26  stalled cycles per insn
       394,745,636      cycles
        63,194,485      stalled-cycles-frontend   #   16.01% frontend cycles idle

       1.002079770 seconds time elapsed

Fixes: 146540fb545b ("perf stat: Always separate stalled cycles per insn")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200207230613.26709-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Mask off reserved bit from #DB exception payload

commit 307f1cfa269657c63cfe2c932386fcc24684d9dd upstream.

KVM defines the #DB payload as compatible with the 'pending debug
exceptions' field under VMX, not DR6. Mask off bit 12 when applying the
payload to DR6, as it is reserved on DR6 but not the 'pending debug
exceptions' field.

Fixes: f10c729ff965 ("kvm: vmx: Defer setting of DR6 until #DB delivery")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: fast models: Fix FVP PCI interrupt-map property

commit 3543d7ddd55fe12c37e8a9db846216c51846015b upstream.

The interrupt map for the FVP's PCI node is missing the
parent-unit-address cells for each of the INTx entries, leading to the
kernel code failing to parse the entries correctly.

Add the missing zero cells, which are pretty useless as far as the GIC
is concerned, but that the spec requires. This allows INTx to be usable
on the model, and VFIO to work correctly.

Fixes: fa083b99eb28 ("arm64: dts: fast models: Add DTS fo Base RevC FVP")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix mount option display for sec=krb5i

commit 3f6166aaf19902f2f3124b5426405e292e8974dd upstream.

Fix display for sec=krb5i which was wrongly interleaved by cruid,
resulting in string "sec=krb5,cruid=<...>i" instead of
"sec=krb5i,cruid=<...>".

Fixes: 96281b9e46eb ("smb3: for kerberos mounts display the credential uid used")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix quiet mode activation in action frames

commit 2bf973ff9b9aeceb8acda629ae65341820d4b35b upstream.

Previously I intended to ignore quiet mode in probe response, however
I ended up ignoring it instead for action frames. As a matter of fact,
this path isn't invoked for probe responses to start with. Just revert
this patch.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Fixes: 7976b1e9e3bf ("mac80211: ignore quiet mode in probe")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-15-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.

commit cf2b012c90e74e85d8aea7d67e48868069cfee0c upstream.

Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to
bits 6/5. This fixs a LTC297X family bug where polling always returns
not busy even when the part is busy. This fixes a LTC388X and
LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was
not polled, which can lead to NACKing of commands. LTC388X and
LTM467X modules now poll BUSY and PEND, increasing reliability by
eliminating NACKing of commands.

Signed-off-by: Mike Jones <michael-a1.jones@analog.com>
Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@analog.com
Fixes: e04d1ce9bbb49 ("hwmon: (ltc2978) Add polling for chips requiring it")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Fix inaccurate period in context switch for auto-reload

commit f861854e1b435b27197417f6f90d87188003cb24 upstream.

Perf doesn't take the left period into account when auto-reload is
enabled with fixed period sampling mode in context switch.

Here is the MSR trace of the perf command as below.
(The MSR trace is simplified from a ftrace log.)

    #perf record -e cycles:p -c 2000000 -- ./triad_loop

      //The MSR trace of task schedule out
      //perf disable all counters, disable PEBS, disable GP counter 0,
      //read GP counter 0, and re-enable all counters.
      //The counter 0 stops at 0xfffffff82840
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
      write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
      write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
      rdpmc: 0, value fffffff82840
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff

      //The MSR trace of the same task schedule in again
      //perf disable all counters, enable and set GP counter 0,
      //enable PEBS, and re-enable all counters.
      //0xffffffe17b80 (-2000000) is written to GP counter 0.
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
      write_msr: MSR_IA32_PMC0(4c1), value ffffffe17b80
      write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
      write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff

When the same task schedule in again, the counter should starts from
previous left. However, it starts from the fixed period -2000000 again.

A special variant of intel_pmu_save_and_restart() is used for
auto-reload, which doesn't update the hwc->period_left.
When the monitored task schedules in again, perf doesn't know the left
period. The fixed period is used, which is inaccurate.

With auto-reload, the counter always has a negative counter value. So
the left period is -value. Update the period_left in
intel_pmu_save_and_restart_reload().

With the patch:

      //The MSR trace of task schedule out
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
      write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
      write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
      rdpmc: 0, value ffffffe25cbc
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff

      //The MSR trace of the same task schedule in again
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
      write_msr: MSR_IA32_PMC0(4c1), value ffffffe25cbc
      write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
      write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff

Fixes: d31fc13fdcb2 ("perf/x86/intel: Fix event update for auto-reload")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200121190125.3389-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spmi: pmic-arb: Set lockdep class for hierarchical irq domains

commit 2d5a2f913b658a7ae984773a63318ed4daadf4af upstream.

I see the following lockdep splat in the qcom pinctrl driver when
attempting to suspend the device.

WARNING: possible recursive locking detected
5.4.11 #3 Tainted: G        W
--------------------------------------------
cat/3074 is trying to acquire lock:
ffffff81f49804c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

but task is already holding lock:
ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&irq_desc_lock_class);
   lock(&irq_desc_lock_class);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

6 locks held by cat/3074:
  #0: ffffff81f01d9420 (sb_writers#7){.+.+}, at: vfs_write+0xd0/0x1a4
  #1: ffffff81bd7d2080 (&of->mutex){+.+.}, at: kernfs_fop_write+0x12c/0x1fc
  #2: ffffff81f4c322f0 (kn->count#337){.+.+}, at: kernfs_fop_write+0x134/0x1fc
  #3: ffffffe411a41d60 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x348
  #4: ffffff81f1c5e970 (&dev->mutex){....}, at: __device_suspend+0x168/0x41c
  #5: ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

stack backtrace:
CPU: 5 PID: 3074 Comm: cat Tainted: G        W         5.4.11 #3
Hardware name: Google Cheza (rev3+) (DT)
Call trace:
  dump_backtrace+0x0/0x174
  show_stack+0x20/0x2c
  dump_stack+0xc8/0x124
  __lock_acquire+0x460/0x2388
  lock_acquire+0x1cc/0x210
  _raw_spin_lock_irqsave+0x64/0x80
  __irq_get_desc_lock+0x64/0x94
  irq_set_irq_wake+0x40/0x144
  qpnpint_irq_set_wake+0x28/0x34
  set_irq_wake_real+0x40/0x5c
  irq_set_irq_wake+0x70/0x144
  pm8941_pwrkey_suspend+0x34/0x44
  platform_pm_suspend+0x34/0x60
  dpm_run_callback+0x64/0xcc
  __device_suspend+0x310/0x41c
  dpm_suspend+0xf8/0x298
  dpm_suspend_start+0x84/0xb4
  suspend_devices_and_enter+0xbc/0x620
  pm_suspend+0x210/0x348
  state_store+0xb0/0x108
  kobj_attr_store+0x14/0x24
  sysfs_kf_write+0x4c/0x64
  kernfs_fop_write+0x15c/0x1fc
  __vfs_write+0x54/0x18c
  vfs_write+0xe4/0x1a4
  ksys_write+0x7c/0xe4
  __arm64_sys_write+0x20/0x2c
  el0_svc_common+0xa8/0x160
  el0_svc_handler+0x7c/0x98
  el0_svc+0x8/0xc

Set a lockdep class when we map the irq so that irq_set_wake() doesn't
warn about a lockdep bug that doesn't exist.

Fixes: 12a9eeaebba3 ("spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200121183748.68662-1-swboyd@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/uclamp: Reject negative values in cpu_uclamp_write()

commit b562d140649966d4daedd0483a8fe59ad3bb465a upstream.

The check to ensure that the new written value into cpu.uclamp.{min,max}
is within range, [0:100], wasn't working because of the signed
comparison

7301                 if (req.percent > UCLAMP_PERCENT_SCALE) {
7302                         req.ret = -ERANGE;
7303                         return req;
7304                 }

# echo -1 > cpu.uclamp.min
# cat cpu.uclamp.min
42949671.96

Cast req.percent into u64 to force the comparison to be unsigned and
work as intended in capacity_from_percent().

# echo -1 > cpu.uclamp.min
sh: write error: Numerical result out of range

Fixes: 2480c093130f ("sched/uclamp: Extend CPU's cgroup controller")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200114210947.14083-1-qais.yousef@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/time: Fix clk type in get_tod_clock

commit 0f8a206df7c920150d2aa45574fba0ab7ff6be4f upstream.

Clang warns:

In file included from ../arch/s390/boot/startup.c:3:
In file included from ../include/linux/elf.h:5:
In file included from ../arch/s390/include/asm/elf.h:132:
In file included from ../include/linux/compat.h:10:
In file included from ../include/linux/time.h:74:
In file included from ../include/linux/time32.h:13:
In file included from ../include/linux/timex.h:65:
../arch/s390/include/asm/timex.h:160:20: warning: passing 'unsigned char
[16]' to parameter of type 'char *' converts between pointers to integer
types with different sign [-Wpointer-sign]
        get_tod_clock_ext(clk);
                          ^~~
../arch/s390/include/asm/timex.h:149:44: note: passing argument to
parameter 'clk' here
static inline void get_tod_clock_ext(char *clk)
                                           ^

Change clk's type to just be char so that it matches what happens in
get_tod_clock_ext.

Fixes: 57b28f66316d ("[S390] s390_hypfs: Add new attributes")
Link: https://github.com/ClangBuiltLinux/linux/issues/861
Link: http://lkml.kernel.org/r/20200208140858.47970-1-natechancellor@gmail.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/core: Fix protection fault in get_pkey_idx_qp_list

commit 1dd017882e01d2fcd9c5dbbf1eb376211111c393 upstream.

We don't need to set pkey as valid in case that user set only one of pkey
index or port number, otherwise it will be resulted in NULL pointer
dereference while accessing to uninitialized pkey list.  The following
crash from Syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP KASAN PTI
  CPU: 1 PID: 14753 Comm: syz-executor.2 Not tainted 5.5.0-rc5 #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:get_pkey_idx_qp_list+0x161/0x2d0
  Code: 01 00 00 49 8b 5e 20 4c 39 e3 0f 84 b9 00 00 00 e8 e4 42 6e fe 48
  8d 7b 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04
  02 84 c0 74 08 3c 01 0f 8e d0 00 00 00 48 8d 7d 04 48 b8
  RSP: 0018:ffffc9000bc6f950 EFLAGS: 00010202
  RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff82c8bdec
  RDX: 0000000000000002 RSI: ffffc900030a8000 RDI: 0000000000000010
  RBP: ffff888112c8ce80 R08: 0000000000000004 R09: fffff5200178df1f
  R10: 0000000000000001 R11: fffff5200178df1f R12: ffff888115dc4430
  R13: ffff888115da8498 R14: ffff888115dc4410 R15: ffff888115da8000
  FS:  00007f20777de700(0000) GS:ffff88811b100000(0000)
  knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000001b2f721000 CR3: 00000001173ca002 CR4: 0000000000360ee0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   port_pkey_list_insert+0xd7/0x7c0
   ib_security_modify_qp+0x6fa/0xfc0
   _ib_modify_qp+0x8c4/0xbf0
   modify_qp+0x10da/0x16d0
   ib_uverbs_modify_qp+0x9a/0x100
   ib_uverbs_write+0xaa5/0xdf0
   __vfs_write+0x7c/0x100
   vfs_write+0x168/0x4a0
   ksys_write+0xc8/0x200
   do_syscall_64+0x9c/0x390
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs")
Link: https://lore.kernel.org/r/20200212080651.GB679970@unreal
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Message-Id: <20200212080651.GB679970@unreal>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/rxe: Fix soft lockup problem due to using tasklets in softirq

commit 8ac0e6641c7ca14833a2a8c6f13d8e0a435e535c upstream.

When run stress tests with RXE, the following Call Traces often occur

  watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0]
  ...
  Call Trace:
  <IRQ>
  create_object+0x3f/0x3b0
  kmem_cache_alloc_node_trace+0x129/0x2d0
  __kmalloc_reserve.isra.52+0x2e/0x80
  __alloc_skb+0x83/0x270
  rxe_init_packet+0x99/0x150 [rdma_rxe]
  rxe_requester+0x34e/0x11a0 [rdma_rxe]
  rxe_do_task+0x85/0xf0 [rdma_rxe]
  tasklet_action_common.isra.21+0xeb/0x100
  __do_softirq+0xd0/0x298
  irq_exit+0xc5/0xd0
  smp_apic_timer_interrupt+0x68/0x120
  apic_timer_interrupt+0xf/0x20
  </IRQ>
  ...

The root cause is that tasklet is actually a softirq. In a tasklet
handler, another softirq handler is triggered. Usually these softirq
handlers run on the same cpu core. So this will cause "soft lockup Bug".

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200212072635.682689-8-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_create

commit 8a4f300b978edbbaa73ef9eca660e45eb9f13873 upstream.

Make sure to free the allocated cpumask_var_t's to avoid the following
reported memory leak by kmemleak:

$ cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8897f812d6a8 (size 8):
  comm "kworker/1:1", pid 347, jiffies 4294751400 (age 101.703s)
  hex dump (first 8 bytes):
    00 00 00 00 00 00 00 00                          ........
  backtrace:
    [<00000000bff49664>] alloc_cpumask_var_node+0x4c/0xb0
    [<0000000075d3ca81>] hfi1_comp_vectors_set_up+0x20f/0x800 [hfi1]
    [<0000000098d420df>] hfi1_init_dd+0x3311/0x4960 [hfi1]
    [<0000000071be7e52>] init_one+0x25e/0xf10 [hfi1]
    [<000000005483d4c2>] local_pci_probe+0xd4/0x180
    [<000000007c3cbc6e>] work_for_cpu_fn+0x51/0xa0
    [<000000001d626905>] process_one_work+0x8f0/0x17b0
    [<000000007e569e7e>] worker_thread+0x536/0xb50
    [<00000000fd39a4a5>] kthread+0x30c/0x3d0
    [<0000000056f2edb3>] ret_from_fork+0x3a/0x50

Fixes: 5d18ee67d4c1 ("IB/{hfi1, rdmavt, qib}: Implement CQ completion vector support")
Link: https://lore.kernel.org/r/20200205110530.12129-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/iw_cxgb4: initiate CLOSE when entering TERM

commit d219face9059f38ad187bde133451a2a308fdb7c upstream.

As per draft-hilland-iwarp-verbs-v1.0, sec 6.2.3, always initiate a CLOSE
when entering into TERM state.

In c4iw_modify_qp(), disconnect operation should only be performed when
the modify_qp call is invoked from ib_core. And all other internal
modify_qp calls(invoked within iw_cxgb4) that needs 'disconnect' should
call c4iw_ep_disconnect() explicitly after modify_qp. Otherwise, deadlocks
like below can occur:

Call Trace:
  schedule+0x2f/0xa0
  schedule_preempt_disabled+0xa/0x10
  __mutex_lock.isra.5+0x2d0/0x4a0
  c4iw_ep_disconnect+0x39/0x430    => tries to reacquire ep lock again
  c4iw_modify_qp+0x468/0x10d0
  rx_data+0x218/0x570              => acquires ep lock
  process_work+0x5f/0x70
  process_one_work+0x1a7/0x3b0
  worker_thread+0x30/0x390
  kthread+0x112/0x130
  ret_from_fork+0x35/0x40

Fixes: d2c33370ae73 ("RDMA/iw_cxgb4: Always disconnect when QP is transitioning to TERMINATE state")
Link: https://lore.kernel.org/r/20200204091230.7210-1-krishna2@chelsio.com
Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/core: Fix invalid memory access in spec_filter_size

commit a72f4ac1d778f7bde93dfee69bfc23377ec3d74f upstream.

Add a check that the size specified in the flow spec header doesn't cause
an overflow when calculating the filter size, and thus prevent access to
invalid memory.  The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP KASAN PTI
  CPU: 1 PID: 17834 Comm: syz-executor.3 Not tainted 5.5.0-rc5 #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:memchr_inv+0xd3/0x330
  Code: 89 f9 89 f5 83 e1 07 0f 85 f9 00 00 00 49 89 d5 49 c1 ed 03 45 85
  ed 74 6f 48 89 d9 48 b8 00 00 00 00 00 fc ff df 48 c1 e9 03 <80> 3c 01
  00 0f 85 0d 02 00 00 44 0f b6 e5 48 b8 01 01 01 01 01 01
  RSP: 0018:ffffc9000a13fa50 EFLAGS: 00010202
  RAX: dffffc0000000000 RBX: 7fff88810de9d820 RCX: 0ffff11021bd3b04
  RDX: 000000000000fff8 RSI: 0000000000000000 RDI: 7fff88810de9d820
  RBP: 0000000000000000 R08: ffff888110d69018 R09: 0000000000000009
  R10: 0000000000000001 R11: ffffed10236267cc R12: 0000000000000004
  R13: 0000000000001fff R14: ffff88810de9d820 R15: 0000000000000040
  FS:  00007f9ee0e51700(0000) GS:ffff88811b100000(0000)
  knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 0000000115ea0006 CR4: 0000000000360ee0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   spec_filter_size.part.16+0x34/0x50
   ib_uverbs_kern_spec_to_ib_spec_filter+0x691/0x770
   ib_uverbs_ex_create_flow+0x9ea/0x1b40
   ib_uverbs_write+0xaa5/0xdf0
   __vfs_write+0x7c/0x100
   vfs_write+0x168/0x4a0
   ksys_write+0xc8/0x200
   do_syscall_64+0x9c/0x390
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x465b49
  Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89
  f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
  f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007f9ee0e50c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000465b49
  RDX: 00000000000003a0 RSI: 00000000200007c0 RDI: 0000000000000004
  RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ee0e516bc
  R13: 00000000004ca2da R14: 000000000070deb8 R15: 00000000ffffffff
  Modules linked in:
  Dumping ftrace buffer:
     (ftrace buffer empty)

Fixes: 94e03f11ad1f ("IB/uverbs: Add support for flow tag")
Link: https://lore.kernel.org/r/20200126171500.4623-1-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/umad: Fix kernel crash while unloading ib_umad

commit 9ea04d0df6e6541c6736b43bff45f1e54875a1db upstream.

When disassociating a device from umad we must ensure that the sysfs
access is prevented before blocking the fops, otherwise assumptions in
syfs don't hold:

    CPU0                     CPU1
ib_umad_kill_port()        ibdev_show()
    port->ib_dev = NULL
                                      dev_name(port->ib_dev)

The prior patch made an error in moving the device_destroy(), it should
have been split into device_del() (above) and put_device() (below). At
this point we already have the split, so move the device_del() back to its
original place.

  kernel stack
  PF: error_code(0x0000) - not-present page
  Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
  RIP: 0010:ibdev_show+0x18/0x50 [ib_umad]
  RSP: 0018:ffffc9000097fe40 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffffffffa0441120 RCX: ffff8881df514000
  RDX: ffff8881df514000 RSI: ffffffffa0441120 RDI: ffff8881df1e8870
  RBP: ffffffff81caf000 R08: ffff8881df1e8870 R09: 0000000000000000
  R10: 0000000000001000 R11: 0000000000000003 R12: ffff88822f550b40
  R13: 0000000000000001 R14: ffffc9000097ff08 R15: ffff8882238bad58
  FS:  00007f1437ff3740(0000) GS:ffff888236940000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000004e8 CR3: 00000001e0dfc001 CR4: 00000000001606e0
  Call Trace:
   dev_attr_show+0x15/0x50
   sysfs_kf_seq_show+0xb8/0x1a0
   seq_read+0x12d/0x350
   vfs_read+0x89/0x140
   ksys_read+0x55/0xd0
   do_syscall_64+0x55/0x1b0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9:

Fixes: cf7ad3030271 ("IB/umad: Avoid destroying device while it is accessed")
Link: https://lore.kernel.org/r/20200212072635.682689-9-leon@kernel.org
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/rdmavt: Reset all QPs when the device is shut down

commit f92e48718889b3d49cee41853402aa88cac84a6b upstream.

When the hfi1 device is shut down during a system reboot, it is possible
that some QPs might have not not freed by ULPs. More requests could be
post sent and a lingering timer could be triggered to schedule more packet
sends, leading to a crash:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000102
  IP: [ffffffff810a65f2] __queue_work+0x32/0x3c0
  PGD 0
  Oops: 0000 1 SMP
  Modules linked in: nvmet_rdma(OE) nvmet(OE) nvme(OE) dm_round_robin nvme_rdma(OE) nvme_fabrics(OE) nvme_core(OE) pal_raw(POE) pal_pmt(POE) pal_cache(POE) pal_pile(POE) pal(POE) pal_compatible(OE) rpcrdma sunrpc ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx4_ib sb_edac edac_core intel_powerclamp coretemp intel_rapl iosf_mbi kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support mxm_wmi ipmi_ssif pcspkr ses enclosure joydev scsi_transport_sas i2c_i801 sg mei_me lpc_ich mei ioatdma shpchp ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter acpi_pad dm_multipath hangcheck_timer ip_tables ext4 mbcache jbd2 mlx4_en
  sd_mod crc_t10dif crct10dif_generic mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm mlx4_core crct10dif_pclmul crct10dif_common hfi1(OE) igb crc32c_intel rdmavt(OE) ahci ib_core libahci libata ptp megaraid_sas pps_core dca i2c_algo_bit i2c_core devlink dm_mirror dm_region_hash dm_log dm_mod
  CPU: 23 PID: 0 Comm: swapper/23 Tainted: P OE ------------ 3.10.0-693.el7.x86_64 #1
  Hardware name: Intel Corporation S2600CWR/S2600CWR, BIOS SE5C610.86B.01.01.0028.121720182203 12/17/2018
  task: ffff8808f4ec4f10 ti: ffff8808f4ed8000 task.ti: ffff8808f4ed8000
  RIP: 0010:[ffffffff810a65f2] [ffffffff810a65f2] __queue_work+0x32/0x3c0
  RSP: 0018:ffff88105df43d48 EFLAGS: 00010046
  RAX: 0000000000000086 RBX: 0000000000000086 RCX: 0000000000000000
  RDX: ffff880f74e758b0 RSI: 0000000000000000 RDI: 000000000000001f
  RBP: ffff88105df43d80 R08: ffff8808f3c583c8 R09: ffff8808f3c58000
  R10: 0000000000000002 R11: ffff88105df43da8 R12: ffff880f74e758b0
  R13: 000000000000001f R14: 0000000000000000 R15: ffff88105a300000
  FS: 0000000000000000(0000) GS:ffff88105df40000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000102 CR3: 00000000019f2000 CR4: 00000000001407e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Stack:
  ffff88105b6dd708 0000001f00000286 0000000000000086 ffff88105a300000
  ffff880f74e75800 0000000000000000 ffff88105a300000 ffff88105df43d98
  ffffffff810a6b85 ffff88105a301e80 ffff88105df43dc8 ffffffffc0224cde
  Call Trace:
  IRQ

  [ffffffff810a6b85] queue_work_on+0x45/0x50
  [ffffffffc0224cde] _hfi1_schedule_send+0x6e/0xc0 [hfi1]
  [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt]
  [ffffffffc0224d62] hfi1_schedule_send+0x32/0x70 [hfi1]
  [ffffffffc0170644] rvt_rc_timeout+0xd4/0x120 [rdmavt]
  [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt]
  [ffffffff81097316] call_timer_fn+0x36/0x110
  [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt]
  [ffffffff8109982d] run_timer_softirq+0x22d/0x310
  [ffffffff81090b3f] __do_softirq+0xef/0x280
  [ffffffff816b6a5c] call_softirq+0x1c/0x30
  [ffffffff8102d3c5] do_softirq+0x65/0xa0
  [ffffffff81090ec5] irq_exit+0x105/0x110
  [ffffffff816b76c2] smp_apic_timer_interrupt+0x42/0x50
  [ffffffff816b5c1d] apic_timer_interrupt+0x6d/0x80
  EOI

  [ffffffff81527a02] ? cpuidle_enter_state+0x52/0xc0
  [ffffffff81527b48] cpuidle_idle_call+0xd8/0x210
  [ffffffff81034fee] arch_cpu_idle+0xe/0x30
  [ffffffff810e7bca] cpu_startup_entry+0x14a/0x1c0
  [ffffffff81051af6] start_secondary+0x1b6/0x230
  Code: 89 e5 41 57 41 56 49 89 f6 41 55 41 89 fd 41 54 49 89 d4 53 48 83 ec 10 89 7d d4 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 be 02 00 00 41 f6 86 02 01 00 00 01 0f 85 58 02 00 00 49 c7 c7 28 19 01 00
  RIP [ffffffff810a65f2] __queue_work+0x32/0x3c0
  RSP ffff88105df43d48
  CR2: 0000000000000102

The solution is to reset the QPs before the device resources are freed.
This reset will change the QP state to prevent post sends and delete
timers to prevent callbacks.

Fixes: 0acb0cc7ecc1 ("IB/rdmavt: Initialize and teardown of qpn table")
Link: https://lore.kernel.org/r/20200210131040.87408.38161.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Close window for pq and request coliding

commit be8638344c70bf492963ace206a9896606b6922d upstream.

Cleaning up a pq can result in the following warning and panic:

  WARNING: CPU: 52 PID: 77418 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0
  list_del corruption, ffff88cb2c6ac068->next is LIST_POISON1 (dead000000000100)
  Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel ast aesni_intel ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev lpc_ich mei_me drm_panel_orientation_quirks i2c_i801 mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables
   nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci i2c_algo_bit libahci dca ptp libata pps_core crc32c_intel [last unloaded: i2c_algo_bit]
  CPU: 52 PID: 77418 Comm: pvbatch Kdump: loaded Tainted: G           OE  ------------   3.10.0-957.38.3.el7.x86_64 #1
  Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019
  Call Trace:
   [<ffffffff90365ac0>] dump_stack+0x19/0x1b
   [<ffffffff8fc98b78>] __warn+0xd8/0x100
   [<ffffffff8fc98bff>] warn_slowpath_fmt+0x5f/0x80
   [<ffffffff8ff970c3>] __list_del_entry+0x63/0xd0
   [<ffffffff8ff9713d>] list_del+0xd/0x30
   [<ffffffff8fddda70>] kmem_cache_destroy+0x50/0x110
   [<ffffffffc0328130>] hfi1_user_sdma_free_queues+0xf0/0x200 [hfi1]
   [<ffffffffc02e2350>] hfi1_file_close+0x70/0x1e0 [hfi1]
   [<ffffffff8fe4519c>] __fput+0xec/0x260
   [<ffffffff8fe453fe>] ____fput+0xe/0x10
   [<ffffffff8fcbfd1b>] task_work_run+0xbb/0xe0
   [<ffffffff8fc2bc65>] do_notify_resume+0xa5/0xc0
   [<ffffffff90379134>] int_signal+0x12/0x17
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
  IP: [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300
  PGD 2cdab19067 PUD 2f7bfdb067 PMD 0
  Oops: 0000 [#1] SMP
  Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel ast aesni_intel ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev lpc_ich mei_me drm_panel_orientation_quirks i2c_i801 mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables
   nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci i2c_algo_bit libahci dca ptp libata pps_core crc32c_intel [last unloaded: i2c_algo_bit]
  CPU: 52 PID: 77418 Comm: pvbatch Kdump: loaded Tainted: G        W  OE  ------------   3.10.0-957.38.3.el7.x86_64 #1
  Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019
  task: ffff88cc26db9040 ti: ffff88b5393a8000 task.ti: ffff88b5393a8000
  RIP: 0010:[<ffffffff8fe1f93e>]  [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300
  RSP: 0018:ffff88b5393abd60  EFLAGS: 00010287
  RAX: 0000000000000000 RBX: ffff88cb2c6ac000 RCX: 0000000000000003
  RDX: 0000000000000400 RSI: 0000000000000400 RDI: ffffffff9095b800
  RBP: ffff88b5393abdb0 R08: ffffffff9095b808 R09: ffffffff8ff77c19
  R10: ffff88b73ce1f160 R11: ffffddecddde9800 R12: ffff88cb2c6ac000
  R13: 000000000000000c R14: ffff88cf3fdca780 R15: 0000000000000000
  FS:  00002aaaaab52500(0000) GS:ffff88b73ce00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000010 CR3: 0000002d27664000 CR4: 00000000007607e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   [<ffffffff8fe20d44>] __kmem_cache_shutdown+0x14/0x80
   [<ffffffff8fddda78>] kmem_cache_destroy+0x58/0x110
   [<ffffffffc0328130>] hfi1_user_sdma_free_queues+0xf0/0x200 [hfi1]
   [<ffffffffc02e2350>] hfi1_file_close+0x70/0x1e0 [hfi1]
   [<ffffffff8fe4519c>] __fput+0xec/0x260
   [<ffffffff8fe453fe>] ____fput+0xe/0x10
   [<ffffffff8fcbfd1b>] task_work_run+0xbb/0xe0
   [<ffffffff8fc2bc65>] do_notify_resume+0xa5/0xc0
   [<ffffffff90379134>] int_signal+0x12/0x17
  Code: 00 00 ba 00 04 00 00 0f 4f c2 3d 00 04 00 00 89 45 bc 0f 84 e7 01 00 00 48 63 45 bc 49 8d 04 c4 48 89 45 b0 48 8b 80 c8 00 00 00 <48> 8b 78 10 48 89 45 c0 48 83 c0 10 48 89 45 d0 48 8b 17 48 39
  RIP  [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300
   RSP <ffff88b5393abd60>
  CR2: 0000000000000010

The panic is the result of slab entries being freed during the destruction
of the pq slab.

The code attempts to quiesce the pq, but looking for n_req == 0 doesn't
account for new requests.

Fix the issue by using SRCU to get a pq pointer and adjust the pq free
logic to NULL the fd pq pointer prior to the quiesce.

Fixes: e87473bc1b6c ("IB/hfi1: Only set fd pointer when base context is completely initialized")
Link: https://lore.kernel.org/r/20200210131033.87408.81174.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Acquire lock to release TID entries when user file is closed

commit a70ed0f2e6262e723ae8d70accb984ba309eacc2 upstream.

Each user context is allocated a certain number of RcvArray (TID)
entries and these entries are managed through TID groups. These groups
are put into one of three lists in each user context: tid_group_list,
tid_used_list, and tid_full_list, depending on the number of used TID
entries within each group. When TID packets are expected, one or more
TID groups will be allocated. After the packets are received, the TID
groups will be freed. Since multiple user threads may access the TID
groups simultaneously, a mutex exp_mutex is used to synchronize the
access. However, when the user file is closed, it tries to release
all TID groups without acquiring the mutex first, which risks a race
condition with another thread that may be releasing its TID groups,
leading to data corruption.

This patch addresses the issue by acquiring the mutex first before
releasing the TID groups when the file is closed.

Fixes: 3abb33ac6521 ("staging/hfi1: Add TID cache receive init and free funcs")
Link: https://lore.kernel.org/r/20200210131026.87408.86853.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Return failure when rts2rts_qp_counters_set_id is not supported

commit 10189e8e6fe8dcde13435f9354800429c4474fb1 upstream.

When binding a QP with a counter and the QP state is not RESET, return
failure if the rts2rts_qp_counters_set_id is not supported by the
device.

This is to prevent cases like manual bind for Connect-IB devices from
returning success when the feature is not supported.

Fixes: d14133dd4161 ("IB/mlx5: Support set qp counter")
Link: https://lore.kernel.org/r/20200126171708.5167-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: ipmi: fix off-by-one bounds check that leads to a out-of-bounds write

commit e0354d147e5889b5faa12e64fa38187aed39aad4 upstream.

The end of buffer check is off-by-one since the check is against
an index that is pre-incremented before a store to buf[]. Fix this
adjusting the bounds check appropriately.

Addresses-Coverity: ("Out-of-bounds write")
Fixes: 51bd6f291583 ("Add support for IPMB driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20200114144031.358003-1-colin.king@canonical.com>
Reviewed-by: Asmaa Mnebhi <asmaa@mellanox.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info

commit f25372ffc3f6c2684b57fb718219137e6ee2b64c upstream.

nvme fw-activate operation will get bellow warning log,
fix it by update the parameter order

[ 113.231513] nvme nvme0: Get FW SLOT INFO log error

Fixes: 0e98719b0e4b ("nvme: simplify the API for getting log pages")
Reported-by: Sujith Pandel <sujith_pandel@dell.com>
Reviewed-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: moxtet: fix potential stack buffer overflow

commit 3bf3c9744694803bd2d6f0ee70a6369b980530fd upstream.

The input_read function declares the size of the hex array relative to
sizeof(buf), but buf is a pointer argument of the function. The hex
array is meant to contain hexadecimal representation of the bin array.

Link: https://lore.kernel.org/r/20200215142130.22743-1-marek.behun@nic.cz
Fixes: 5bc7f990cd98 ("bus: Add support for Moxtet bus")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reported-by: sohu0106 <sohu0106@126.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Make sure the shrinker does not reclaim referenced BOs

commit 7e0cf7e9936c4358b0863357b90aa12afe6489da upstream.

Userspace might tag a BO purgeable while it's still referenced by GPU
jobs. We need to make sure the shrinker does not purge such BOs until
all jobs referencing it are finished.

Fixes: 013b65101315 ("drm/panfrost: Add madvise and shrinker support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129135908.2439529-9-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vgem: Close use-after-free race in vgem_gem_create

commit 4b848f20eda5974020f043ca14bacf7a7e634fc8 upstream.

There's two references floating around here (for the object reference,
not the handle_count reference, that's a different thing):

- The temporary reference held by vgem_gem_create, acquired by
  creating the object and released by calling
  drm_gem_object_put_unlocked.

- The reference held by the object handle, created by
  drm_gem_handle_create. This one generally outlives the function,
  except if a 2nd thread races with a GEM_CLOSE ioctl call.

So usually everything is correct, except in that race case, where the
access to gem_object->size could be looking at freed data already.
Which again isn't a real problem (userspace shot its feet off already
with the race, we could return garbage), but maybe someone can exploit
this as an information leak.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+0dc4444774d419e916c8@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eric Anholt <eric@anholt.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202132133.1891846-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/uv: Fix handling of length extensions

commit 27dc0700c3be7c681cea03c5230b93d02f623492 upstream.

The query parameter block might contain additional information and can
be extended in the future. If the size of the block does not suffice we
get an error code of rc=0x100. The buffer will contain all information
up to the specified size and the hypervisor/guest simply do not need the
additional information as they do not know about the new data. That
means that we can (and must) accept rc=0x100 as success.

Cc: stable@vger.kernel.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Fixes: 5abb9351dfd9 ("s390/uv: introduce guest side ultravisor code")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pkey: fix missing length of protected key on return

commit aab73d278d49c718b722ff5052e16c9cddf144d4 upstream.

The pkey ioctl call PKEY_SEC2PROTK updates a struct pkey_protkey
on return. The protected key is stored in, the protected key type
is stored in but the len information was not updated. This patch
now fixes this and so the len field gets an update to refrect
the actual size of the protected key value returned.

Fixes: efc598e6c8a9 ("s390/zcrypt: move cca misc functions to new code file")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reported-by: Christian Rund <RUNDC@de.ibm.com>
Suggested-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/amd: Add missing L2 misses event spec to AMD Family 17h's event map

commit 25d387287cf0330abf2aad761ce6eee67326a355 upstream.

Commit 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h"),
claimed L2 misses were unsupported, due to them not being found in its
referenced documentation, whose link has now moved [1].

That old documentation listed PMCx064 unit mask bit 3 as:

    "LsRdBlkC: LS Read Block C S L X Change to X Miss."

and bit 0 as:

    "IcFillMiss: IC Fill Miss"

We now have new public documentation [2] with improved descriptions, that
clearly indicate what events those unit mask bits represent:

Bit 3 now clearly states:

    "LsRdBlkC: Data Cache Req Miss in L2 (all types)"

and bit 0 is:

    "IcFillMiss: Instruction Cache Req Miss in L2."

So we can now add support for L2 misses in perf's genericised events as
PMCx064 with both the above unit masks.

[1] The commit's original documentation reference, "Processor Programming
    Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors",
    originally available here:

        https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf

    is now available here:

        https://developer.amd.com/wordpress/media/2017/11/54945_PPR_Family_17h_Models_00h-0Fh.pdf

[2] "Processor Programming Reference (PPR) for Family 17h Model 31h,
    Revision B0 Processors", available here:

https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdf

Fixes: 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h")
Reported-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200121171232.28839-1-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Use correct root level for nested EPT shadow page tables

commit 148d735eb55d32848c3379e460ce365f2c1cbe4b upstream.

Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU
currently also hardcodes the page walk level for nested EPT to be 4
levels. The L2 guest is all but guaranteed to soft hang on its first
instruction when L1 is using EPT, as KVM will construct 4-level page
tables and then tell hardware to use 5-level page tables.

Fixes: 855feb673640 ("KVM: MMU: Add 5 level EPT & Shadow page table support.")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/mc: Fix use-after-free and memleaks during device removal

commit 216aa145aaf379a50b17afc812db71d893bd6683 upstream.

A test kernel with the options DEBUG_TEST_DRIVER_REMOVE, KASAN and
DEBUG_KMEMLEAK set, revealed several issues when removing an mci device:

1) Use-after-free:

On 27.11.19 17:07:33, John Garry wrote:
> [   22.104498] BUG: KASAN: use-after-free in
> edac_remove_sysfs_mci_device+0x148/0x180

The use-after-free is caused by the mci_for_each_dimm() macro called in
edac_remove_sysfs_mci_device(). The iterator was introduced with

  c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator").

The iterator loop calls device_unregister(&dimm->dev), which removes
the sysfs entry of the device, but also frees the dimm struct in
dimm_attr_release(). When incrementing the loop in mci_for_each_dimm(),
the dimm struct is accessed again, after having been freed already.

The fix is to free all the mci device's subsequent dimm and csrow
objects at a later point, in _edac_mc_free(), when the mci device itself
is being freed.

This keeps the data structures intact and the mci device can be
fully used until its removal. The change allows the safe usage of
mci_for_each_dimm() to release dimm devices from sysfs.

2) Memory leaks:

Following memory leaks have been detected:

# grep edac /sys/kernel/debug/kmemleak | sort | uniq -c
       1     [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0      # mci->csrows
      16     [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0      # csr->channels
      16     [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0      # csr->channels[chn]
       1     [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0      # mci->dimms
      34     [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc()

All leaks are from memory allocated by edac_mc_alloc().

Note: The test above shows that edac_mc_alloc() was called here from
ghes_edac_register(), thus both functions show up in the stack trace
but the module causing the leaks is edac_mc. The comments with the data
structures involved were made manually by analyzing the objdump.

The data structures listed above and created by edac_mc_alloc() are
not properly removed during device removal, which is done in
edac_mc_free().

There are two paths implemented to remove the device depending on device
registration, _edac_mc_free() is called if the device is not registered
and edac_unregister_sysfs() otherwise.

The implemenations differ. For the sysfs case, the mci device removal
lacks the removal of subsequent data structures (csrows, channels,
dimms). This causes the memory leaks (see mci_attr_release()).

[ bp: Massage commit message. ]

Fixes: c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator")
Fixes: faa2ad09c01c ("edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs.")
Fixes: 7a623c039075 ("edac: rewrite the sysfs code to use struct device")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200212120340.4764-3-rrichter@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/sysfs: Remove csrow objects on errors

commit 4d59588c09f2a2daedad2a544d4d1b602ab3a8af upstream.

All created csrow objects must be removed in the error path of
edac_create_csrow_objects(). The objects have been added as devices.

They need to be removed by doing a device_del() *and* put_device() call
to also free their memory. The missing put_device() leaves a memory
leak. Use device_unregister() instead of device_del() which properly
unregisters the device doing both.

Fixes: 7adc05d2dc3a ("EDAC/sysfs: Drop device references properly")
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200212120340.4764-4-rrichter@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: make sure we do not overflow the max EA buffer size

commit 85db6b7ae65f33be4bb44f1c28261a3faa126437 upstream.

RHBZ: 1752437

Before we add a new EA we should check that this will not overflow
the maximum buffer we have available to read the EAs back.
Otherwise we can get into a situation where the EAs are so big that
we can not read them back to the client and thus we can not list EAs
anymore or delete them.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xprtrdma: Fix DMA scatter-gather list mapping imbalance

commit ca1c671302825182629d3c1a60363cee6f5455bb upstream.

The @nents value that was passed to ib_dma_map_sg() has to be passed
to the matching ib_dma_unmap_sg() call. If ib_dma_map_sg() choses to
concatenate sg entries, it will return a different nents value than
it was passed.

The bug was exposed by recent changes to the AMD IOMMU driver, which
enabled sg entry concatenation.

Looking all the way back to commit 4143f34e01e9 ("xprtrdma: Port to
new memory registration API") and reviewing other kernel ULPs, it's
not clear that the frwr_map() logic was ever correct for this case.

Reported-by: Andre Tomt <andre@tomt.net>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: ssbs: Fix context-switch when SSBS is present on all CPUs

commit fca3d33d8ad61eb53eca3ee4cac476d1e31b9008 upstream.

When all CPUs in the system implement the SSBS extension, the SSBS field
in PSTATE is the definitive indication of the mitigation state. Further,
when the CPUs implement the SSBS manipulation instructions (advertised
to userspace via an HWCAP), EL0 can toggle the SSBS field directly and
so we cannot rely on any shadow state such as TIF_SSBD at all.

Avoid forcing the SSBS field in context-switch on such a system, and
simply rely on the PSTATE register instead.

Cc: <stable@vger.kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Srinivas Ramana <sramana@codeaurora.org>
Fixes: cbdf8a189a66 ("arm64: Force SSBS on context switch")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: xilinx: Fix bug where the wrong GPIO register is written to

commit c3afa804c58e5c30ac63858b527fffadc88bce82 upstream.

Care is taken with "index", however with the current version
the actual xgpio_writereg is using index for data but
xgpio_regoffset(chip, i) for the offset. And since i is already
incremented it is incorrect. This patch fixes it so that index
is used for the offset too.

Cc: stable@vger.kernel.org
Signed-off-by: Paul Thomas <pthomas8589@gmail.com>
Link: https://lore.kernel.org/r/20200125221410.8022-1-pthomas8589@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: npcm: Bring back GPIOLIB support

commit e383e871ab54f073c2a798a9e0bde7f1d0528de8 upstream.

The CONFIG_ARCH_REQUIRE_GPIOLIB is gone since commit 65053e1a7743
("gpio: delete ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB") and all platforms
should explicitly select GPIOLIB to have it.

Link: https://lore.kernel.org/r/20200130195525.4525-1-krzk@kernel.org
Cc: <stable@vger.kernel.org>
Fixes: 65053e1a7743 ("gpio: delete ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: log message when rw remount is attempted with unclean tree-log

commit 10a3a3edc5b89a8cd095bc63495fb1e0f42047d9 upstream.

A remount to a read-write filesystem is not safe when there's tree-log
to be replayed. Files that could be opened until now might be affected
by the changes in the tree-log.

A regular mount is needed to replay the log so the filesystem presents
the consistent view with the pending changes included.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: print message when tree-log replay starts

commit e8294f2f6aa6208ed0923aa6d70cea3be178309a upstream.

There's no logged information about tree-log replay although this is
something that points to previous unclean unmount. Other filesystems
report that as well.

Suggested-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: ref-verify: fix memory leaks

commit f311ade3a7adf31658ed882aaab9f9879fdccef7 upstream.

In btrfs_ref_tree_mod(), 'ref' and 'ra' are allocated through kzalloc() and
kmalloc(), respectively. In the following code, if an error occurs, the
execution will be redirected to 'out' or 'out_unlock' and the function will
be exited. However, on some of the paths, 'ref' and 'ra' are not
deallocated, leading to memory leaks. For example, if 'action' is
BTRFS_ADD_DELAYED_EXTENT, add_block_entry() will be invoked. If the return
value indicates an error, the execution will be redirected to 'out'. But,
'ref' is not deallocated on this path, causing a memory leak.

To fix the above issues, deallocate both 'ref' and 'ra' before exiting from
the function when an error is encountered.

CC: stable@vger.kernel.org # 4.15+
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix race between using extent maps and merging them

commit ac05ca913e9f3871126d61da275bfe8516ff01ca upstream.

We have a few cases where we allow an extent map that is in an extent map
tree to be merged with other extents in the tree. Such cases include the
unpinning of an extent after the respective ordered extent completed or
after logging an extent during a fast fsync. This can lead to subtle and
dangerous problems because when doing the merge some other task might be
using the same extent map and as consequence see an inconsistent state of
the extent map - for example sees the new length but has seen the old start
offset.

With luck this triggers a BUG_ON(), and not some silent bug, such as the
following one in __do_readpage():

  $ cat -n fs/btrfs/extent_io.c
  3061  static int __do_readpage(struct extent_io_tree *tree,
  3062                           struct page *page,
  (...)
  3127                  em = __get_extent_map(inode, page, pg_offset, cur,
  3128                                        end - cur + 1, get_extent, em_cached);
  3129                  if (IS_ERR_OR_NULL(em)) {
  3130                          SetPageError(page);
  3131                          unlock_extent(tree, cur, end);
  3132                          break;
  3133                  }
  3134                  extent_offset = cur - em->start;
  3135                  BUG_ON(extent_map_end(em) <= cur);
  (...)

Consider the following example scenario, where we end up hitting the
BUG_ON() in __do_readpage().

We have an inode with a size of 8KiB and 2 extent maps:

  extent A: file offset 0, length 4KiB, disk_bytenr = X, persisted on disk by
            a previous transaction

  extent B: file offset 4KiB, length 4KiB, disk_bytenr = X + 4KiB, not yet
            persisted but writeback started for it already. The extent map
    is pinned since there's writeback and an ordered extent in
    progress, so it can not be merged with extent map A yet

The following sequence of steps leads to the BUG_ON():

1) The ordered extent for extent B completes, the respective page gets its
   writeback bit cleared and the extent map is unpinned, at that point it
   is not yet merged with extent map A because it's in the list of modified
   extents;

2) Due to memory pressure, or some other reason, the MM subsystem releases
   the page corresponding to extent B - btrfs_releasepage() is called and
   returns 1, meaning the page can be released as it's not dirty, not under
   writeback anymore and the extent range is not locked in the inode's
   iotree. However the extent map is not released, either because we are
   not in a context that allows memory allocations to block or because the
   inode's size is smaller than 16MiB - in this case our inode has a size
   of 8KiB;

3) Task B needs to read extent B and ends up __do_readpage() through the
   btrfs_readpage() callback. At __do_readpage() it gets a reference to
   extent map B;

4) Task A, doing a fast fsync, calls clear_em_loggin() against extent map B
   while holding the write lock on the inode's extent map tree - this
   results in try_merge_map() being called and since it's possible to merge
   extent map B with extent map A now (the extent map B was removed from
   the list of modified extents), the merging begins - it sets extent map
   B's start offset to 0 (was 4KiB), but before it increments the map's
   length to 8KiB (4kb + 4KiB), task A is at:

   BUG_ON(extent_map_end(em) <= cur);

   The call to extent_map_end() sees the extent map has a start of 0
   and a length still at 4KiB, so it returns 4KiB and 'cur' is 4KiB, so
   the BUG_ON() is triggered.

So it's dangerous to modify an extent map that is in the tree, because some
other task might have got a reference to it before and still using it, and
needs to see a consistent map while using it. Generally this is very rare
since most paths that lookup and use extent maps also have the file range
locked in the inode's iotree. The fsync path is pretty much the only
exception where we don't do it to avoid serialization with concurrent
reads.

Fix this by not allowing an extent map do be merged if if it's being used
by tasks other then the one attempting to merge the extent map (when the
reference count of the extent map is greater than 2).

Reported-by: ryusuke1925 <st13s20@gm.ibaraki-ct.ac.jp>
Reported-by: Koki Mitani <koki.mitani.xg@hco.ntt.co.jp>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206211
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: improve explanation of a mount failure caused by a misconfigured kernel

commit d65d87a07476aa17df2dcb3ad18c22c154315bec upstream.

If CONFIG_QFMT_V2 is not enabled, but CONFIG_QUOTA is enabled, when a
user tries to mount a file system with the quota or project quota
enabled, the kernel will emit a very confusing messsage:

EXT4-fs warning (device vdc): ext4_enable_quotas:5914: Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix.
EXT4-fs (vdc): mount failed

We will now report an explanatory message indicating which kernel
configuration options have to be enabled, to avoid customer/sysadmin
confusion.

Link: https://lore.kernel.org/r/20200215012738.565735-1-tytso@mit.edu
Google-Bug-Id: 149093531
Fixes: 7c319d328505b778 ("ext4: make quota as first class supported feature")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add cond_resched() to ext4_protect_reserved_inode

commit af133ade9a40794a37104ecbcc2827c0ea373a3c upstream.

When journal size is set too big by "mkfs.ext4 -J size=", or when
we mount a crafted image to make journal inode->i_size too big,
the loop, "while (i < num)", holds cpu too long. This could cause
soft lockup.

[  529.357541] Call trace:
[  529.357551]  dump_backtrace+0x0/0x198
[  529.357555]  show_stack+0x24/0x30
[  529.357562]  dump_stack+0xa4/0xcc
[  529.357568]  watchdog_timer_fn+0x300/0x3e8
[  529.357574]  __hrtimer_run_queues+0x114/0x358
[  529.357576]  hrtimer_interrupt+0x104/0x2d8
[  529.357580]  arch_timer_handler_virt+0x38/0x58
[  529.357584]  handle_percpu_devid_irq+0x90/0x248
[  529.357588]  generic_handle_irq+0x34/0x50
[  529.357590]  __handle_domain_irq+0x68/0xc0
[  529.357593]  gic_handle_irq+0x6c/0x150
[  529.357595]  el1_irq+0xb8/0x140
[  529.357599]  __ll_sc_atomic_add_return_acquire+0x14/0x20
[  529.357668]  ext4_map_blocks+0x64/0x5c0 [ext4]
[  529.357693]  ext4_setup_system_zone+0x330/0x458 [ext4]
[  529.357717]  ext4_fill_super+0x2170/0x2ba8 [ext4]
[  529.357722]  mount_bdev+0x1a8/0x1e8
[  529.357746]  ext4_mount+0x44/0x58 [ext4]
[  529.357748]  mount_fs+0x50/0x170
[  529.357752]  vfs_kern_mount.part.9+0x54/0x188
[  529.357755]  do_mount+0x5ac/0xd78
[  529.357758]  ksys_mount+0x9c/0x118
[  529.357760]  __arm64_sys_mount+0x28/0x38
[  529.357764]  el0_svc_common+0x78/0x130
[  529.357766]  el0_svc_handler+0x38/0x78
[  529.357769]  el0_svc+0x8/0xc
[  541.356516] watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [mount:18674]

Link: https://lore.kernel.org/r/20200211011752.29242-1-luoshijie1@huawei.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix checksum errors with indexed dirs

commit 48a34311953d921235f4d7bbd2111690d2e469cf upstream.

DIR_INDEX has been introduced as a compat ext4 feature. That means that
even kernels / tools that don't understand the feature may modify the
filesystem. This works because for kernels not understanding indexed dir
format, internal htree nodes appear just as empty directory entries.
Index dir aware kernels then check the htree structure is still
consistent before using the data. This all worked reasonably well until
metadata checksums were introduced. The problem is that these
effectively made DIR_INDEX only ro-compatible because internal htree
nodes store checksums in a different place than normal directory blocks.
Thus any modification ignorant to DIR_INDEX (or just clearing
EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch
and trigger kernel errors. So we have to be more careful when dealing
with indexed directories on filesystems with checksumming enabled.

1) We just disallow loading any directory inodes with EXT4_INDEX_FL when
DIR_INDEX is not enabled. This is harsh but it should be very rare (it
means someone disabled DIR_INDEX on existing filesystem and didn't run
e2fsck), e2fsck can fix the problem, and we don't want to answer the
difficult question: "Should we rather corrupt the directory more or
should we ignore that DIR_INDEX feature is not set?"

2) When we find out htree structure is corrupted (but the filesystem and
the directory should in support htrees), we continue just ignoring htree
information for reading but we refuse to add new entries to the
directory to avoid corrupting it more.

Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz
Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix support for inode sizes > 1024 bytes

commit 4f97a68192bd33b9963b400759cef0ca5963af00 upstream.

A recent commit, 9803387c55f7 ("ext4: validate the
debug_want_extra_isize mount option at parse time"), moved mount-time
checks around. One of those changes moved the inode size check before
the blocksize variable was set to the blocksize of the file system.
After 9803387c55f7 was set to the minimum allowable blocksize, which
in practice on most systems would be 1024 bytes. This cuased file
systems with inode sizes larger than 1024 bytes to be rejected with a
message:

EXT4-fs (sdXX): unsupported inode size: 4096

Fixes: 9803387c55f7 ("ext4: validate the debug_want_extra_isize mount option at parse time")
Link: https://lore.kernel.org/r/20200206225252.GA3673@mit.edu
Reported-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't assume that mmp_nodename/bdevname have NUL

commit 14c9ca0583eee8df285d68a0e6ec71053efd2228 upstream.

Don't assume that the mmp_nodename and mmp_bdevname strings are NUL
terminated, since they are filled in by snprintf(), which is not
guaranteed to do so.

Link: https://lore.kernel.org/r/1580076215-1048-1-git-send-email-adilger@dilger.ca
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000

commit 9f35a31283775e6f6af73fb2c95c686a4c0acac7 upstream.

It should be safe to ignore clock validity check result if the following
conditions are met:
- only one single sample rate is supported;
- the terminal is directly connected to the clock source;
- the clock type is internal.

This is to deal with some Denon DJ controllers that always reports that
clock is invalid.

Tested-by: Tobias Oszlanyi <toszlanyi@yahoo.de>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: sound: usb: usb true/false for bool return type

commit 1d4961d9eb1aaa498dfb44779b7e4b95d79112d0 upstream.

Use true/false for bool type return in uac_clock_source_is_valid().

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/20191029175200.GA7320@saurav
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system

commit fdde0ff8590b4c1c41b3227f5ac4265fccccb96b upstream.

If the platform triggers a spurious SCI even though the status bit
is not set for any GPE when the system is suspended to idle, it will
be treated as a genuine wakeup, so avoid that by checking if any GPEs
are active at all before returning 'true' from acpi_s2idle_wake().

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206413
Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow")
Reported-by: Tsuchiya Yuto <kitakar@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Introduce acpi_any_gpe_status_set()

commit ea128834dd76f9a72a35d011c651fa96658f06a7 upstream.

Introduce a new helper function, acpi_any_gpe_status_set(), for
checking the status bits of all enabled GPEs in one go.

It is needed to distinguish spurious SCIs from genuine ones when
deciding whether or not to wake up the system from suspend-to-idle.

Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: PM: s2idle: Avoid possible race related to the EC GPE

commit e3728b50cd9be7d4b1469447cdf1feb93e3b7adb upstream.

It is theoretically possible for the ACPI EC GPE to be set after the
s2idle_ops->wake() called from s2idle_loop() has returned and before
the subsequent pm_wakeup_pending() check is carried out. If that
happens, the resulting wakeup event will cause the system to resume
even though it may be a spurious one.

To avoid that race, first make the ->wake() callback in struct
platform_s2idle_ops return a bool value indicating whether or not
to let the system resume and rearrange s2idle_loop() to use that
value instad of the direct pm_wakeup_pending() call if ->wake() is
present.

Next, rework acpi_s2idle_wake() to process EC events and check
pm_wakeup_pending() before re-arming the SCI for system wakeup
to prevent it from triggering prematurely and add comments to
that function to explain the rationale for the new code flow.

Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: EC: Fix flushing of pending work

commit f0ac20c3f6137910c8a927953e8a92f5b3716166 upstream.

Commit 016b87ca5c8c ("ACPI: EC: Rework flushing of pending work")
introduced a subtle bug into the flushing of pending EC work while
suspended to idle, which may cause the EC driver to fail to
re-enable the EC GPE after handling a non-wakeup event (like a
battery status change event, for example).

The problem is that the work item flushed by flush_scheduled_work()
in __acpi_ec_flush_work() may disable the EC GPE and schedule another
work item expected to re-enable it, but that new work item is not
flushed, so __acpi_ec_flush_work() returns with the EC GPE disabled
and the CPU running it goes into an idle state subsequently. If all
of the other CPUs are in idle states at that point, the EC GPE won't
be re-enabled until at least one CPU is woken up by another interrupt
source, so system wakeup events that would normally come from the EC
then don't work.

This is reproducible on a Dell XPS13 9360 in my office which
sometimes stops reacting to power button and lid events (triggered
by the EC on that machine) after switching from AC power to battery
power or vice versa while suspended to idle (each of those switches
causes the EC GPE to trigger for several times in a row, but they
are not system wakeup events).

To avoid this problem, it is necessary to drain the workqueue
entirely in __acpi_ec_flush_work(), but that cannot be done with
respect to system_wq, because work items may be added to it from
other places while __acpi_ec_flush_work() is running. For this
reason, make the EC driver use a dedicated workqueue for EC events
processing (let that workqueue be ordered so that EC events are
processed sequentially) and use drain_workqueue() on it in
__acpi_ec_flush_work().

Fixes: 016b87ca5c8c ("ACPI: EC: Rework flushing of pending work")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Apply sample rate quirk for Audioengine D1

commit 93f9d1a4ac5930654c17412e3911b46ece73755a upstream.

The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate,
but it returns the rate in byte-reversed order.

When setting sampling rate, the driver produces these warning messages:
[168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100
[168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000
[168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000

As can be seen from the hexadecimal conversion, the current rate read
back is byte-reversed from the rate that was set.

44100 == 0x00ac44, 4500480 == 0x44ac00
48000 == 0x00bb80, 8436480 == 0x80bb00
96000 == 0x017700, 30465 == 0x007701

Rather than implementing a new quirk to reverse the order, just skip
checking the rate to avoid spamming the log.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200211162235.1639889-1-nivedita@alum.mit.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fix silent output on MSI-GL73

commit 7dafba3762d6c0083ded00a48f8c1a158bc86717 upstream.

MSI-GL73 laptop with ALC1220 codec requires a similar workaround for
Clevo laptops to enforce the DAC/mixer connection path. Set up a
quirk entry for that.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204159
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212081047.27727-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add more codec supported Headset Button

commit 2b3b6497c38d123934de68ea82a247b557d95290 upstream.

Add supported Headset Button for ALC215/ALC285/ALC289.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/948f70b4488f4cc2b629a39ce4e4be33@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix UAC2/3 effect unit parsing

commit d75a170fd848f037a1e28893ad10be7a4c51f8a6 upstream.

We've got a regression report about M-Audio Fast Track C400 device,
and the git bisection resulted in the commit e0ccdef92653 ("ALSA:
usb-audio: Clean up check_input_term()").  This commit was about the
rewrite of the input terminal parser, and it's not too obvious from
the change what really broke.  The answer is: it's the interpretation
of UAC2/3 effect units.

In the original code, UAC2 effect unit is as if through UAC1
processing unit because both UAC1 PU and UAC2/3 EU share the same
number (0x07).  The old code went through a complex switch-case
fallthrough, finally bailing out in the middle:

  if (protocol == UAC_VERSION_2 &&
      hdr[2] == UAC2_EFFECT_UNIT) {
         /* UAC2/UAC1 unit IDs overlap here in an
          * uncompatible way. Ignore this unit for now.
          */
         return 0;
   }

... and this special handling was missing in the new code; the new
code treats UAC2/3 effect unit as if it were equivalent with the
processing unit.

Actually, the old code was too confusing.  The effect unit has an
incompatible unit description with the processing unit, so we
shouldn't have dealt with EU in the same way.

This patch addresses the regression by changing the effect unit
handling to the own parser function.  The own parser function makes
the clear distinct with PU, so it improves the readability, too.

The EU parser just sets the type and the id like the old kernels.
Once when the proper effect unit support is added, we can revisit this
parser function, but for now, let's keep this simple setup as is.

Fixes: e0ccdef92653 ("ALSA: usb-audio: Clean up check_input_term()")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206147
Link: https://lore.kernel.org/r/20200211160521.31990-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list

commit 5179a9dfa9440c1781816e2c9a183d1d2512dc61 upstream.

The Yoga 11e is using LEN0049, but it doesn't have a trackstick.

Thus, there is no need to create a software top buttons row.

However, it seems that the device works under SMBus, so keep it as part
of the smbus_pnp_ids.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200115013023.9710-1-benjamin.tissoires@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - enable SMBus on ThinkPad L470

commit b8a3d819f872e0a3a0a6db0dbbcd48071042fb98 upstream.

Add touchpad LEN2044 to the list, as it is capable of working with
psmouse.synaptics_intertouch=1

Signed-off-by: Gaurav Agrawal <agrawalgaurav@gnome.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/CADdtggVzVJq5gGNmFhKSz2MBwjTpdN5YVOdr4D3Hkkv=KZRc9g@mail.gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - switch T470s to RMI4 by default

commit bf502391353b928e63096127e5fd8482080203f5 upstream.

This supports RMI4 and everything seems to work, including the touchpad
buttons. So, let's enable this by default.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200204194322.112638-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.20

selinux: fall back to ref-walk if audit is required

commit 0188d5c025ca8fe756ba3193bd7d150139af5a88 upstream.

commit bda0be7ad994 ("security: make inode_follow_link RCU-walk aware")
passed down the rcu flag to the SELinux AVC, but failed to adjust the
test in slow_avc_audit() to also return -ECHILD on LSM_AUDIT_DATA_DENTRY.
Previously, we only returned -ECHILD if generating an audit record with
LSM_AUDIT_DATA_INODE since this was only relevant from inode_permission.
Move the handling of MAY_NOT_BLOCK to avc_audit() and its inlined
equivalent in selinux_inode_permission() immediately after we determine
that audit is required, and always fall back to ref-walk in this case.

Fixes: bda0be7ad994 ("security: make inode_follow_link RCU-walk aware")
Reported-by: Will Deacon <will@kernel.org>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libertas: make lbs_ibss_join_existing() return error code on rates overflow

[ Upstream commit 1754c4f60aaf1e17d886afefee97e94d7f27b4cb ]

Commit e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss
descriptor") introduced a bounds check on the number of supplied rates to
lbs_ibss_join_existing() and made it to return on overflow.

However, the aforementioned commit doesn't set the return value accordingly
and thus, lbs_ibss_join_existing() would return with zero even though it
failed.

Make lbs_ibss_join_existing return -EINVAL in case the bounds check on the
number of supplied rates fails.

Fixes: e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss descriptor")
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libertas: don't exit from lbs_ibss_join_existing() with RCU read lock held

[ Upstream commit c7bf1fb7ddca331780b9a733ae308737b39f1ad4 ]

Commit e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss
descriptor") introduced a bounds check on the number of supplied rates to
lbs_ibss_join_existing().

Unfortunately, it introduced a return path from within a RCU read side
critical section without a corresponding rcu_read_unlock(). Fix this.

Fixes: e5e884b42639 ("libertas: Fix two buffer overflows at parsing bss descriptor")
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>