review.tizen.org Git - platform/kernel/linux-rpi.git/log

fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE

[ Upstream commit 95152433e46fdb36652ebdbea442356a16ae1fa6 ]

When the SBE requests a reset via the down FIFO, that is also the
FIFO we should go and reset ;)

Fixes: 9f4a8a2d7f9d ("fsi/sbefifo: Add driver for the SBE FIFO")
Signed-off-by: Joachim Fenkes <FENKES@de.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200724071518.430515-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsi: occ: Don't accept response from un-initialized OCC

[ Upstream commit 8a4659be08576141f47d47d94130eb148cb5f0df ]

If the OCC is not initialized and responds as such, the driver
should continue waiting for a valid response until the timeout
expires.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Fixes: 7ed98dddb764 ("fsi: Add On-Chip Controller (OCC) driver")
Link: https://lore.kernel.org/r/20210209171235.20624-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsi: scom: Reset the FSI2PIB engine for any error

[ Upstream commit a5c317dac5567206ca7b6bc9d008dd6890c8bced ]

The error bits in the FSI2PIB status are only cleared by a reset. So
the driver needs to perform a reset after seeing any of the FSI2PIB
errors, otherwise subsequent operations will also look like failures.

Fixes: 6b293258cded ("fsi: scom: Major overhaul")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210329151344.14246-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsi: core: Fix return of error values on failures

[ Upstream commit 910810945707fe9877ca86a0dca4e585fd05e37b ]

Currently the cfam_read and cfam_write functions return the provided
number of bytes given in the count parameter and not the error return
code in variable rc, hence all failures of read/writes are being
silently ignored. Fix this by returning the error code in rc.

Addresses-Coverity: ("Unused value")
Fixes: d1dcd6782576 ("fsi: Add cfam char devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jeremy Kerr <jk@ozlabs.org>
Link: https://lore.kernel.org/r/20210603122812.83587-1-colin.king@canonical.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: rn5t618: Fix IRQ trigger by changing it to level mode

[ Upstream commit a1649a5260631979c68e5b2012f60f90300e646f ]

During more massive generation of interrupts, the IRQ got stuck,
and the subdevices did not see any new interrupts. That happens
especially at wonky USB supply in combination with ADC reads.
To fix that trigger the IRQ at level low instead of falling edge.

Fixes: 0c81604516af ("mfd: rn5t618: Add IRQ support")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: mp2629: Select MFD_CORE to fix build error

[ Upstream commit a933272041d852a1ef1c85f0c18b93e9999a41fa ]

MFD_MP2629 should select MFD_CORE to a prevent build error:

ERROR: modpost: "devm_mfd_add_devices" [drivers/mfd/mp2629.ko] undefined!

Fixes: 06081646450e ("mfd: mp2629: Add support for mps battery charger")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Flush block work before unblock

[ Upstream commit 7ce9fc5ecde0d8bd64c29baee6c5e3ce7074ec9a ]

We set the max_active iSCSI EH works to 1, so all work is going to execute
in order by default. However, userspace can now override this in sysfs. If
max_active > 1, we can end up with the block_work on CPU1 and
iscsi_unblock_session running the unblock_work on CPU2 and the session and
target/device state will end up out of sync with each other.

This adds a flush of the block_work in iscsi_unblock_session.

Link: https://lore.kernel.org/r/20210525181821.7617-17-michael.christie@oracle.com
Fixes: 1d726aa6ef57 ("scsi: iscsi: Optimize work queue flush use")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: FlashPoint: Rename si_flags field

[ Upstream commit 4d431153e751caa93f3b7e6f6313446974e92253 ]

The BusLogic driver has build errors on ia64 due to a name collision (in
the #included FlashPoint.c file). Rename the struct field in struct
sccb_mgr_info from si_flags to si_mflags (manager flags) to mend the build.

This is the first problem. There are 50+ others after this one:

In file included from ../include/uapi/linux/signal.h:6,
                 from ../include/linux/signal_types.h:10,
                 from ../include/linux/sched.h:29,
                 from ../include/linux/hardirq.h:9,
                 from ../include/linux/interrupt.h:11,
                 from ../drivers/scsi/BusLogic.c:27:
../arch/ia64/include/uapi/asm/siginfo.h:15:27: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
   15 | #define si_flags _sifields._sigfault._flags
      |                           ^
../drivers/scsi/FlashPoint.c:43:6: note: in expansion of macro 'si_flags'
   43 |  u16 si_flags;
      |      ^~~~~~~~
In file included from ../drivers/scsi/BusLogic.c:51:
../drivers/scsi/FlashPoint.c: In function 'FlashPoint_ProbeHostAdapter':
../drivers/scsi/FlashPoint.c:1076:11: error: 'struct sccb_mgr_info' has no member named '_sifields'
1076 |  pCardInfo->si_flags = 0x0000;
      |           ^~
../drivers/scsi/FlashPoint.c:1079:12: error: 'struct sccb_mgr_info' has no member named '_sifields'

Link: https://lore.kernel.org/r/20210529234857.6870-1-rdunlap@infradead.org
Fixes: 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit.")
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: lp50xx: Put fwnode in error case during ->probe()

[ Upstream commit f1e1d532da7e6ef355528a22fb97d9a8fbf76c4e ]

fwnode_for_each_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

OTOH, the successful iteration will drop reference count under the hood, no need
to do it twice.

Fixes: 242b81170fb8 ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: lm3697: Don't spam logs when probe is deferred

[ Upstream commit 807553f8bf4afa673750e52905e0f9488179112f ]

When requesting GPIO line the probe can be deferred.
In such case don't spam logs with an error message.
This can be achieved by switching to dev_err_probe().

Fixes: 5c1d824cda9f ("leds: lm3697: Introduce the lm3697 driver")
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: lm3692x: Put fwnode in any case during ->probe()

[ Upstream commit f55db1c7fadc2a29c9fa4ff3aec98dbb111f2206 ]

device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

Fixes: 9a5c1c64ac0a ("leds: lm3692x: Change DT calls to fwnode calls")
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: lm36274: Put fwnode in error case during ->probe()

[ Upstream commit 3c5f655c44bb65cb7e3c219d08c130ce5fa45d7f ]

device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

In the older code the same is implied with device_for_each_child_node().

Fixes: 11e1bbc116a7 ("leds: lm36274: Introduce the TI LM36274 LED driver")
Fixes: a448fcf19c9c ("leds: lm36274: don't iterate through children since there is only one")
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: lm3532: select regmap I2C API

[ Upstream commit 99be74f61cb0292b518f5e6d7e5c6611555c2ec7 ]

Regmap APIs should be selected, otherwise link can fail

ERROR: modpost: "__devm_regmap_init_i2c" [drivers/leds/leds-lm3532.ko] undefined!

Fixes: bc1b8492c764 ("leds: lm3532: Introduce the lm3532 LED driver")
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: class: The -ENOTSUPP should never be seen by user space

[ Upstream commit 0ac40af86077982a5346dbc9655172d2775d6b08 ]

Drop the bogus error code and let of_led_get() to take care about absent
of_node.

Fixes: e389240ad992 ("leds: Add managed API to get a LED from a device driver")
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: nozomi: Fix the error handling path of 'nozomi_card_init()'

[ Upstream commit 6ae7d0f5a92b9619f6e3c307ce56b2cefff3f0e9 ]

The error handling path is broken and we may un-register things that have
never been registered.

Update the loops index accordingly.

Fixes: 9842c38e9176 ("kfifo: fix warn_unused_result")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e28c2e92c7475da25b03d022ea2d6dcf1ba807a2.1621968629.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: stratix10-svc: Fix a resource leak in an error handling path

[ Upstream commit d99247f9b542533ddbf87a3481a05473b8e48194 ]

If an error occurs after a successful 'kfifo_alloc()' call, it must be
undone by a corresponding 'kfifo_free()' call, as already done in the
remove function.

While at it, move the 'platform_device_put()' call to this new error
handling path and explicitly return 0 in the success path.

Fixes: b5dc75c915cd ("firmware: stratix10-svc: extend svc to support new RSU features")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0ca3f3ab139c53e846804455a1e7599ee8ae896a.1621621271.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

char: pcmcia: error out if 'num_bytes_read' is greater than 4 in set_protocol()

[ Upstream commit 37188559c610f1b7eec83c8e448936c361c578de ]

Theoretically, it will cause index out of bounds error if
'num_bytes_read' is greater than 4. As we expect it(and was tested)
never to be greater than 4, error out if it happens.

Fixes: c1986ee9bea3 ("[PATCH] New Omnikey Cardman 4000 driver")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20210521120617.138396-1-yukuai3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: mmal-vchiq: Fix incorrect static vchiq_instance.

[ Upstream commit afc023da53e46b88552822f2fe035c7129c505a2 ]

For some reason lost in history function vchiq_mmal_init used
a static variable for storing the vchiq_instance.
This value is retrieved from vchiq per instance, so worked fine
until you try to call vchiq_mmal_init multiple times concurrently
when things then go wrong. This seemed to happen quite frequently
if using the cutdown firmware (no MMAL or VCSM services running)
as the vchiq_connect then failed, and one or other vchiq_shutdown
was working on an invalid handle.

Remove the static so that each caller gets a unique vchiq_instance.

Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1621979857-26754-1-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: arasan: Ensure proper configuration for the asserted target

[ Upstream commit b5437c7b682c9a505065b4ab4716cdc951dc3c7c ]

The controller being always asserting one CS or the other, there is no
need to actually select the right target before doing a page read/write.
However, the anfc_select_target() helper actually also changes the
timing configuration and clock in the case were two different NAND chips
with different timing requirements would be used. In this situation, we
must ensure proper configuration of the controller by calling it.

As a consequence of this change, the anfc_select_target() helper is
being moved earlier in the driver.

Fixes: 88ffef1b65cf ("mtd: rawnand: arasan: Support the hardware BCH ECC engine")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210526093242.183847-4-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: partitions: redboot: seek fis-index-block in the right node

[ Upstream commit 237960880960863fb41888763d635b384cffb104 ]

fis-index-block is seeked in the master node and not in the partitions node.
For following binding and current usage, the driver need to check the
partitions subnode.

Fixes: c0e118c8a1a3 ("mtd: partitions: Add OF support to RedBoot partitions")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210520114851.1274609-1-clabbe@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf scripting python: Fix tuple_set_u64()

[ Upstream commit d04c1ff0b3ddd5c0fbbe640996c8eaad279ed1c5 ]

tuple_set_u64() produces a signed value instead of an unsigned value.
That works for database export but not other cases. Rename to
tuple_set_d64() for database export and fix tuple_set_u64().

Fixes: df919b400ad3f ("perf scripting python: Extend interface to export data in a database-friendly way")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-2-adrian.hunter@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: hil_kbd - fix error return code in hil_dev_connect()

[ Upstream commit d9b576917a1d0efa293801a264150a1b37691617 ]

Return error code -EINVAL rather than '0' when the combo devices are not
supported.

Fixes: fa71c605c2bb ("Input: combine hil_kbd and hil_ptr drivers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210515030053.6824-1-thunder.leizhen@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rsnd: tidyup loop on rsnd_adg_clk_query()

[ Upstream commit cf9d5c6619fadfc41cf8f5154cb990cc38e3da85 ]

commit 06e8f5c842f2d ("ASoC: rsnd: don't call clk_get_rate() under
atomic context") used saved clk_rate, thus for_each_rsnd_clk()
is no longer needed. This patch fixes it.

Fixes: 06e8f5c842f2d ("ASoC: rsnd: don't call clk_get_rate() under atomic context")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v978oe2u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

backlight: lm3630a_bl: Put fwnode in error case during ->probe()

[ Upstream commit 6d1c32dbedd7d7e7372aa38033ec8782c39f6379 ]

device_for_each_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

Cc: Brian Masney <masneyb@onstation.org>
Cc: Dan Murphy <dmurphy@ti.com>
Fixes: 8fbce8efe15cd ("backlight: lm3630a: Add firmware node support")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: hisilicon: fix missing clk_disable_unprepare() on error in hi6210_i2s_startup()

[ Upstream commit 375904e3931955fcf0a847f029b2492a117efc43 ]

After calling clk_prepare_enable(), clk_disable_unprepare() need
be called when calling clk_set_rate() failed.

Fixes: 0bf750f4cbe1 ("ASoC: hisilicon: Add hi6210 i2s audio driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210518044514.607010-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rk3328: fix missing clk_disable_unprepare() on error in rk3328_platform_probe()

[ Upstream commit d14eece945a8068a017995f7512ea2beac21e34b ]

Fix the missing clk_disable_unprepare() before return
from rk3328_platform_probe() in the error handling case.

Fixes: c32759035ad2 ("ASoC: rockchip: support ACODEC for rk3328")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210518075847.1116983-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: potentiostat: lmp91000: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()

[ Upstream commit 8979b67ec61abc232636400ee8c758a16a73c95f ]

Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.

Here structure is not used, because this buffer is also used
elsewhere in the driver.

Fixes: 67e17300dc1d ("iio: potentiostat: add LMP91000 support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210501171352.512953-8-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: cros_ec_sensors: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()

[ Upstream commit 8dea228b174ac9637b567e5ef54f4c40db4b3c41 ]

The samples buffer is passed to iio_push_to_buffers_with_timestamp()
which requires a buffer aligned to 8 bytes as it is assumed that
the timestamp will be naturally aligned if present.

Fixes tag is inaccurate but prior to that likely manual backporting needed
(for anything before 4.18) Earlier than that the include file to fix is
drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h:
commit 974e6f02e27 ("iio: cros_ec_sensors_core: Add common functions
for the ChromeOS EC Sensor Hub.") present since kernel stable 4.10.
(Thanks to Gwendal for tracking this down)

Fixes: 5a0b8cb46624c ("iio: cros_ec: Move cros_ec_sensors_core.h in /include")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org
Link: https://lore.kernel.org/r/20210501171352.512953-7-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: chemical: atlas: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit b0f5d8db7348a6ce5cdd79fba46ebc91eebc8fd9 ]

Variable location for the timestamp, so just use __aligned(8)
to ensure it is always possible to naturally align it.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes tag is not accurate, but it will need manual backporting beyond
that point if anyone cares.

Fixes: 0d15190f53b4 ("iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210501171352.512953-6-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: light: tcs3472: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit df2f37cffd6ed486d613e7ee22aadc8e49ae2dd3 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp().

Fixes tag is not strictly accurate as prior to that patch there was
potentially an unaligned write. However, any backport past there will
need to be done manually.

Fixes: 0624bf847dd0 ("iio:tcs3472: Use iio_push_to_buffers_with_timestamp()")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-20-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: light: tcs3414: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit ff08fbc22ab32ccc6690c21b0e5e1d402dcc076f ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: a244e7b57f0f ("iio: Add driver for AMS/TAOS tcs3414 digital color sensor")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-19-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: light: isl29125: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 3d4725194de6935dba2ad7c9cc075c885008f747 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: 6c25539cbc46 ("iio: Add Intersil isl29125 digital color light sensor driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-18-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: magn: bmc150: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 7692088f72865c41b6b531fd09486ee99a5da930 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: c91746a2361d ("iio: magn: Add support for BMC150 magnetometer")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-17-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: magn: hmc5843: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 1ef2f51e9fe424ccecca5bb0373d71b900c2cd41 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: 7247645f6865 ("iio: hmc5843: Move hmc5843 out of staging")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-16-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: prox: as3935: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 37eb8d8c64f2ecb3a5521ba1cc1fad973adfae41 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: 37b1ba2c68cf ("iio: proximity: as3935: fix buffer stack trashing")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-15-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: prox: pulsed-light: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 679cc377a03ff1944491eafc7355c1eb1fad4109 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: cb119d535083 ("iio: proximity: add support for PulsedLight LIDAR")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-14-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 19f1a254fe4949fff1e67db386409f48cf438bd7 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: 78f839029e1d ("iio: distance: srf08: add IIO driver for us ranger")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-13-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: humidity: am2315: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit f4ca2e2595d9fee65d5ce0d218b22ce00e5b2915 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: 0d96d5ead3f7 ("iio: humidity: Add triggered buffer support for AM2315")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-12-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: gyro: bmg160: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 06778d881f3798ce93ffbbbf801234292250b598 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: 13426454b649 ("iio: bmg160: Separate i2c and core driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-11-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: vf610: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 7765dfaa22ea08abf0c175e7553826ba2a939632 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: 0010d6b44406 ("iio: adc: vf610: Add IIO buffer support for Vybrid ADC")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Cc: Sanchayan Maity <maitysanchayan@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-10-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: ti-ads1015: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit d85d71dd1ab67eaa7351f69fec512d8f09d164e1 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes: ecc24e72f437 ("iio: adc: Add TI ADS1015 ADC driver support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-9-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: stk8ba50: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 334883894bc1e145a1e0f5de1b0d1b6a1133f0e6 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes: db6a19b8251f ("iio: accel: Add trigger support for STK8BA50")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-8-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: stk8312: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit f40a71ffec808e7e51848f63f0c0d3c32d65081b ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes: 95c12bba51c3 ("iio: accel: Add buffer mode for Sensortek STK8312")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-7-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: mxc4005: Fix overread of data and alignment issue.

[ Upstream commit f65802284a3a337510d7f8f916c97d66c74f2e71 ]

The bulk read size is based on the size of an array that also has
space for the timestamp alongside the channels.
Fix that and also fix alignment of the buffer passed
to iio_push_to_buffers_with_timestamp.

Found during an audit of all calls to this function.

Fixes: 1ce0eda0f757 ("iio: mxc4005: add triggered buffer mode for mxc4005")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-6-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: kxcjk-1013: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 3ab3aa2e7bd57497f9a7c6275c00dce237d2c9ba ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes: 1a4fbf6a9286 ("iio: accel: kxcjk1013 3-axis accelerometer driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-5-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: hid: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit c6559bf796ccdb3a0c79db846af96c8f7046880b ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Note this matches what was done in all the other hid sensor drivers.
This one was missed previously due to an extra level of indirection.

Found during an audit of all calls of this function.

Fixes: a96cd0f901ee ("iio: accel: hid-sensor-accel-3d: Add timestamp")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-4-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: bma220: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 151dbf0078da98206817ee0b87d499035479ef11 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes: 194dc4c71413 ("iio: accel: Add triggered buffer support for BMA220")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-3-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: bma180: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit fc36da3131a747a9367a05caf06de19be1bcc972 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes: b9a6a237ffc9 ("iio:bma180: Drop _update_scan_mode()")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-2-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adis16475: do not return ints in irq handlers

[ Upstream commit 00a72db718fa198da3946286dcad222399ccd4fb ]

On an IRQ handler we should not return normal error codes as 'irqreturn_t'
is expected.

This is done by jumping to the 'check_burst32' label where we return
'IRQ_HANDLED'. Note that it is fine to do the burst32 check in this
error path. If we have proper settings to apply burst32, we might just
do the setup now so that the next sample already uses it.

Fixes: fff7352bf7a3c ("iio: imu: Add support for adis16475")
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210427085454.30616-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adis16400: do not return ints in irq handlers

[ Upstream commit ab3df79782e7d8a27a58576c9b4e8c6c4879ad79 ]

On an IRQ handler we should not return normal error codes as 'irqreturn_t'
is expected.

Not necessary to apply to stable as the original check cannot fail and
as such the bug cannot actually occur.

Fixes: 5eda3550a3cc1 ("staging:iio:adis16400: Preallocate transfer message")
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210422101911.135630-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adis_buffer: do not return ints in irq handlers

[ Upstream commit d877539ad8e8fdde9af69887055fec6402be1a13 ]

On an IRQ handler we should not return normal error codes as 'irqreturn_t'
is expected.

Not necessarily stable material as the old check cannot fail, so it's a bug
we can not hit.

Fixes: ccd2b52f4ac69 ("staging:iio: Add common ADIS library")
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210422101911.135630-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: re-fix for unaligned accesses

[ Upstream commit 8f4e3d48bb50765ab27ae5bebed2595b20de80a1 ]

A patch from 2017 changed some accesses to DMA memory to use
get_unaligned_le32() and similar interfaces, to avoid problems
with doing unaligned accesson uncached memory.

However, the change in the mwifiex_pcie_alloc_sleep_cookie_buf()
function ended up changing the size of the access instead,
as it operates on a pointer to u8.

Change this function back to actually access the entire 32 bits.
Note that the pointer is aligned by definition because it came
from dma_alloc_coherent().

Fixes: 92c70a958b0b ("mwifiex: fix for unaligned reads")
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: nozomi: Fix a resource leak in an error handling function

[ Upstream commit 31a9a318255960d32ae183e95d0999daf2418608 ]

A 'request_irq()' call is not balanced by a corresponding 'free_irq()' in
the error handling path, as already done in the remove function.

Add it.

Fixes: 9842c38e9176 ("kfifo: fix warn_unused_result")
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4f0d2b3038e82f081d370ccb0cade3ad88463fe7.1620580838.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_omap: fix a timeout loop condition

[ Upstream commit d7e325aaa8c3593b5a572b583ecad79e95f32e7f ]

This loop ends on -1 so the error message will never be printed.

Fixes: 4bcf59a5dea0 ("serial: 8250: 8250_omap: Account for data in flight during DMA teardown")
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YIpd+kOpXKMpEXPf@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: fsl_lpuart: remove RTSCTS handling from get_mctrl()

[ Upstream commit e60c2991f18bf221fa9908ff10cb24eaedaa9bae ]

The wrong code in set_mctrl() was already removed in commit 2b30efe2e88a
("tty: serial: lpuart: Remove unnecessary code from set_mctrl"), but the
code in get_mctrl() wasn't removed. It will not return the state of the
RTS or CTS line but whether automatic flow control is enabled, which is
wrong for the get_mctrl(). Thus remove it.

Fixes: 2b30efe2e88a ("tty: serial: lpuart: Remove unnecessary code from set_mctrl")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210512141255.18277-7-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: fsl_lpuart: don't modify arbitrary data on lpuart32

[ Upstream commit ccf08fd1204bcb5311cc10aea037c71c6e74720a ]

lpuart_rx_dma_startup() is used for both the 8 bit and the 32 bit
version of the LPUART. Modify the UARTCR only for the 8 bit version.

Fixes: f4eef224a09f ("serial: fsl_lpuart: add sysrq support when using dma")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210512141255.18277-2-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Invoke rcu_spawn_core_kthreads() from rcu_spawn_gp_kthread()

[ Upstream commit 8e4b1d2bc198e34b48fc7cc3a3c5a2fcb269e271 ]

Currently, rcu_spawn_core_kthreads() is invoked via an early_initcall(),
which works, except that rcu_spawn_gp_kthread() is also invoked via an
early_initcall() and rcu_spawn_core_kthreads() relies on adjustments to
kthread_prio that are carried out by rcu_spawn_gp_kthread().  There is
no guaranttee of ordering among early_initcall() handlers, and thus no
guarantee that kthread_prio will be properly checked and range-limited
at the time that rcu_spawn_core_kthreads() needs it.

In most cases, this bug is harmless.  After all, the only reason that
rcu_spawn_gp_kthread() adjusts the value of kthread_prio is if the user
specified a nonsensical value for this boot parameter, which experience
indicates is rare.

Nevertheless, a bug is a bug.  This commit therefore causes the
rcu_spawn_core_kthreads() function to be invoked directly from
rcu_spawn_gp_kthread() after any needed adjustments to kthread_prio have
been carried out.

Fixes: 48d07c04b4cc ("rcu: Enable elimination of Tree-RCU softirq processing")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5682: Disable irq on shutdown

[ Upstream commit 47bcb1c7108363418cd578283333d72e310dfeaa ]

We cancel the work queues, and reset the device on shutdown, but the irq
isn't disabled so the work queues could be queued again. Let's disable
the irq during shutdown so that we don't have to worry about this device
trying to do anything anymore. This fixes a problem seen where the i2c
bus is shutdown at reboot but this device irq still comes in and tries
to make another i2c transaction when the bus doesn't work.

Cc: Jairaj Arava <jairaj.arava@intel.com>
Cc: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Fixes: 45a2702ce109 ("ASoC: rt5682: Fix panic in rt5682_jack_detect_handler happening during system shutdown")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210508075151.1626903-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: fbtft: Don't spam logs when probe is deferred

[ Upstream commit 37667f6e57712cef5652fa67f1cbd1299e204d94 ]

When requesting GPIO line the probe can be deferred.
In such case don't spam logs with an error message.
This can be achieved by switching to dev_err_probe().

Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface")
Cc: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210503172114.27891-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: fbtft: Rectify GPIO handling

[ Upstream commit ec03c2104365ead0a33627c05e685093eed3eaef ]

The infamous commit c440eee1a7a1 ("Staging: staging: fbtft: Switch to
the GPIO descriptor interface") broke GPIO handling completely.
It has already four commits to rectify and it seems not enough.
In order to fix the mess here we:

  1) Set default to "inactive" for all requested pins

  2) Fix CS#, RD#, and WR# pins polarity since it's active low
     and GPIO descriptor interface takes it into consideration
     from the Device Tree or ACPI

  3) Consolidate chip activation (CS# assertion) under default
     ->reset() callback

To summarize the expectations about polarity for GPIOs:

   RD# Low
   WR# Low
   CS# Low
   RESET# Low
   DC or RS High
   RW High
   Data 0 .. 15 High

See also Adafruit learning course [1] for the example of the schematics.

While at it, drop unneeded NULL checks, since GPIO API is tolerant to that.

[1]: https://learn.adafruit.com/adafruit-2-8-and-3-2-color-tft-touchscreen-breakout-v2/downloads

Fixes: 92e3e884887c ("Staging: fbtft: Fix GPIO handling")
Fixes: b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor")
Fixes: dbc4f989c878 ("Staging: fbtft: Fix probing of gpio descriptor")
Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface")
Cc: Jan Sebastian Götte <linux@jaseg.net>
Cc: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210503172114.27891-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Fix PKMAP with 32-bit MIPS huge page support

[ Upstream commit cf02ce742f09188272bcc8b0e62d789eb671fc4c ]

When 32-bit MIPS huge page support is enabled, we halve the number of
pointers a PTE page holds, making its last half go to waste.
Correspondingly, we should halve the number of kmap entries, as we just
initialized only a single pte table for that in pagetable_init().

Fixes: 35476311e529 ("MIPS: Add partial 32-bit huge page support")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Always release restrack object

[ Upstream commit 3d8287544223a3d2f37981c1f9ffd94d0b5e9ffc ]

Change location of rdma_restrack_del() to fix the bug where
task_struct was acquired but not released, causing to resource leak.

  ucma_create_id() {
    ucma_alloc_ctx();
    rdma_create_user_id() {
      rdma_restrack_new();
      rdma_restrack_set_name() {
        rdma_restrack_attach_task.part.0(); <--- task_struct was gotten
      }
    }
    ucma_destroy_private_ctx() {
      ucma_put_ctx();
      rdma_destroy_id() {
        _destroy_id()                       <--- id_priv was freed
      }
    }
  }

Fixes: 889d916b6f8a ("RDMA/core: Don't access cm_id after its destruction")
Link: https://lore.kernel.org/r/073ec27acb943ca8b6961663c47c5abe78a5c8cc.1624948948.git.leonro@nvidia.com
Reported-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Don't access NULL-cleared mpi pointer

[ Upstream commit 4a754d7637026b42b0c9ba5787ad5ee3bc2ff77f ]

The "dev->port[i].mp.mpi" is set to NULL during mlx5_ib_unbind_slave_port()
execution, however that field is needed to add device to unaffiliated list.

Such flow causes to the following kernel panic while unloading mlx5_ib
module in multi-port mode, hence the device should be added to the list
prior to unbind call.

RPC: Unregistered rdma transport module.
RPC: Unregistered rdma backchannel transport module.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
CPU: 4 PID: 1904 Comm: modprobe Not tainted 5.13.0-rc7_for_upstream_min_debug_2021_06_24_12_08 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5_ib_cleanup_multiport_master+0x18b/0x2d0 [mlx5_ib]
Code: 00 04 0f 85 c4 00 00 00 48 89 df e8 ef fa ff ff 48 8b 83 40 0d 00 00 48 8b 15 b9 e8 05 00 4a 8b 44 28 20 48 89 05 ad e8 05 00 <48> c7 00 d0 57 c5 a0 48 89 50 08 48 89 02 39 ab 88 0a 00 00 0f 86
RSP: 0018:ffff888116ee3df8 EFLAGS: 00010296
RAX: 0000000000000000 RBX: ffff8881154f6000 RCX: 0000000000000080
RDX: ffffffffa0c557d0 RSI: ffff88810b69d200 RDI: 000000000002d8a0
RBP: 0000000000000002 R08: ffff888110780408 R09: 0000000000000000
R10: ffff88812452e1c0 R11: fffffffffff7e028 R12: 0000000000000000
R13: 0000000000000080 R14: ffff888102c58000 R15: 0000000000000000
FS:  00007f884393a740(0000) GS:ffff8882f5a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001249f6004 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  mlx5_ib_stage_init_cleanup+0x16/0xd0 [mlx5_ib]
  __mlx5_ib_remove+0x33/0x90 [mlx5_ib]
  mlx5r_remove+0x22/0x30 [mlx5_ib]
  auxiliary_bus_remove+0x18/0x30
  __device_release_driver+0x177/0x220
  driver_detach+0xc4/0x100
  bus_remove_driver+0x58/0xd0
  auxiliary_driver_unregister+0x12/0x20
  mlx5_ib_cleanup+0x13/0x897 [mlx5_ib]
  __x64_sys_delete_module+0x154/0x230
  ? exit_to_user_mode_prepare+0x104/0x140
  do_syscall_64+0x3f/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f8842e095c7
Code: 73 01 c3 48 8b 0d d9 48 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a9 48 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc68f6e758 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 00005638207929c0 RCX: 00007f8842e095c7
RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000563820792a28
RBP: 00005638207929c0 R08: 00007ffc68f6d701 R09: 0000000000000000
R10: 00007f8842e82880 R11: 0000000000000206 R12: 0000563820792a28
R13: 0000000000000001 R14: 0000563820792a28 R15: 00007ffc68f6fb40
Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_ipoib ib_cm ib_umad mlx5_ib(-) mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core mlx5_core ptp pps_core [last unloaded: rpcrdma]
CR2: 0000000000000000
---[ end trace a0bb7e20804e9e9b ]---

Fixes: 7ce6095e3bff ("RDMA/mlx5: Don't add slave port to unaffiliated list")
Link: https://lore.kernel.org/r/899ac1b33a995be5ec0e16a4765c4e43c2b1ba5b.1624956444.git.leonro@nvidia.com
Reviewed-by: Itay Aveksis <itayav@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tipc: fix FB_MTU eat two pages

[ Upstream commit 0c6de0c943dbb42831bf7502eb5c007f71e752d2 ]

FB_MTU is used in 'tipc_msg_build()' to alloc smaller skb when memory
allocation fails, which can avoid unnecessary sending failures.

The value of FB_MTU now is 3744, and the data size will be:

  (3744 + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + \
    SKB_DATA_ALIGN(BUF_HEADROOM + BUF_TAILROOM + 3))

which is larger than one page(4096), and two pages will be allocated.

To avoid it, replace '3744' with a calculation:

  (PAGE_SIZE - SKB_DATA_ALIGN(BUF_OVERHEAD) - \
    SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))

What's more, alloc_skb_fclone() will call SKB_DATA_ALIGN for data size,
and it's not necessary to make alignment for buf_size in
tipc_buf_acquire(). So, just remove it.

Fixes: 4c94cc2d3d57 ("tipc: fall back to smaller MTU if allocation of local send skb fails")
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: fix warning in tcindex_alloc_perfect_hash

[ Upstream commit 3f2db250099f46988088800052cdf2332c7aba61 ]

Syzbot reported warning in tcindex_alloc_perfect_hash. The problem
was in too big cp->hash, which triggers warning in kmalloc. Since
cp->hash comes from userspace, there is no need to warn if value
is not correct

Fixes: b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()")
Reported-and-tested-by: syzbot+1071ad60cd7df39fdadb@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lwtunnel: handle MTU calculation in forwading

[ Upstream commit fade56410c22cacafb1be9f911a0afd3701d8366 ]

Commit 14972cbd34ff ("net: lwtunnel: Handle fragmentation") moved
fragmentation logic away from lwtunnel by carry encap headroom and
use it in output MTU calculation. But the forwarding part was not
covered and created difference in MTU for output and forwarding and
further to silent drops on ipv4 forwarding path. Fix it by taking
into account lwtunnel encap headroom.

The same commit also introduced difference in how to treat RTAX_MTU
in IPv4 and IPv6 where latter explicitly removes lwtunnel encap
headroom from route MTU. Make IPv4 version do the same.

Fixes: 14972cbd34ff ("net: lwtunnel: Handle fragmentation")
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

writeback: fix obtain a reference to a freeing memcg css

[ Upstream commit 8b0ed8443ae6458786580d36b7d5f8125535c5d4 ]

The caller of wb_get_create() should pin the memcg, because
wb_get_create() relies on this guarantee. The rcu read lock
only can guarantee that the memcg css returned by css_from_id()
cannot be released, but the reference of the memcg can be zero.

  rcu_read_lock()
  memcg_css = css_from_id()
  wb_get_create(memcg_css)
      cgwb_create(memcg_css)
          // css_get can change the ref counter from 0 back to 1
          css_get(memcg_css)
  rcu_read_unlock()

Fix it by holding a reference to the css before calling
wb_get_create(). This is not a problem I encountered in the
real world. Just the result of a code review.

Fixes: 682aa8e1a6a1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates")
Link: https://lore.kernel.org/r/20210402091145.80635-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: si5341: Update initialization magic

[ Upstream commit 3c9b49b0031aefb81adfdba5ab0ddf3ca3a2cdc9 ]

Update the default register settings to include the VCO_RESET_CALCODE
settings (set by the SiLabs ClockBuilder software but not described in
the datasheet). Also update part of the initialization sequence to match
ClockBuilder and the datasheet.

Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-6-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: si5341: Check for input clock presence and PLL lock on startup

[ Upstream commit 71dcc4d1f7d2ad97ff7ab831281bc6893ff713a2 ]

After initializing the device, wait for it to report that the input
clock is present and the PLL has locked before declaring success.

Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-5-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: si5341: Avoid divide errors due to bogus register contents

[ Upstream commit 78f6f406026d688868223d5dbeb197a4f7e9a9fd ]

If the Si5341 is being initially programmed and has no stored NVM
configuration, some of the register contents may contain unexpected
values, such as zeros, which could cause divide by zero errors during
driver initialization. Trap errors caused by zero registers or zero clock
rates which could result in divide errors later in the code.

Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-4-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: si5341: Wait for DEVICE_READY on startup

[ Upstream commit 6e7d2de1e000d36990923ed80d2e78dfcb545cee ]

The Si5341 datasheet warns that before accessing any other registers,
including the PAGE register, we need to wait for the DEVICE_READY register
to indicate the device is ready, or the process of the device loading its
state from NVM can be corrupted. Wait for DEVICE_READY on startup before
continuing initialization. This is done using a raw I2C register read
prior to setting up regmap to avoid any potential unwanted automatic PAGE
register accesses from regmap at this stage.

Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-3-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepare

[ Upstream commit 7f54bf2640e877c8a9b4cc7e2b29f82e3ca1a284 ]

Caught this when looking at alpha-pll code. Untested but it is clear that
this was intended to write to PLL_CAL_L_VAL and not PLL_ALPHA_VAL.

Fixes: 691865bad627 ("clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210609022852.4151-1-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC

[ Upstream commit fd90b5b9045274360b12cea0f2ce50f3bcfb25cc ]

There are a few issues with the setup of the Actions Semi Owl S500 SoC's
clock chain involving AHPPREDIV, H and AHB clocks:

* AHBPREDIV clock is defined as a muxer only, although it also acts as
  a divider.
* H clock is using a wrong divider register offset
* AHB is defined as a multi-rate factor clock, but it is actually just
  a fixed pass clock.

Let's provide the following fixes:

* Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition.
* Use the correct register shift value in the OWL_DIVIDER definition
  for H clock
* Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an
  ungated OWL_COMP_FIXED_FACTOR definition.

Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/21c1abd19a7089b65a34852ac6513961be88cbe1.1623354574.git.cristian.ciocaltea@gmail.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC

[ Upstream commit a8f1f03caa51aa7a69c671aa87c475034db7d368 ]

The following clocks of the Actions Semi Owl S500 SoC have been defined
to use a shared clock factor table 'bisp_factor_table[]': DE[1-2], VCE,
VDE, BISP, SENSOR[0-1]

There are several issues involved in this approach:

* 'bisp_factor_table[]' describes the configuration of a regular 8-rates
  divider, so its usage is redundant. Additionally, judging by the BISP
  clock context, it is incomplete since it maps only 8 out of 12
  possible entries.

* The clocks mentioned above are not identical in terms of the available
  rates, therefore cannot rely on the same factor table. Specifically,
  BISP and SENSOR* are standard 12-rate dividers so their configuration
  should rely on a proper clock div table, while VCE and VDE require a
  factor table that is a actually a subset of the one needed for DE[1-2]
  clocks.

Let's fix this by implementing the following:

* Add new factor tables 'de_factor_table' and 'hde_factor_table' to
  properly handle DE[1-2], VCE and VDE clocks.

* Add a common div table 'std12rate_div_table' for BISP and SENSOR[0-1]
  clocks converted to OWL_COMP_DIV.

* Drop the now unused 'bisp_factor_table[]'.

Additionally, drop the CLK_IGNORE_UNUSED flag for SENSOR[0-1] since
there is no reason to always keep ON those clocks.

Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/e675820a46cd9930d8d576c6cae61d41c1a8416f.1623354574.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: actions: Fix SD clocks factor table on Owl S500 SoC

[ Upstream commit fe1f71e338d77814da3ef44e9f64d32981a6ccdf ]

Drop the unsupported entries in the factor table used for the SD[0-2]
clocks definitions on the Actions Semi Owl S500 SoC.

Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/196c948d708a22b8198c95f064a0f6b6820f9980.1623354574.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: actions: Fix UART clock dividers on Owl S500 SoC

[ Upstream commit 2dca2a619a907579e3e65e7c1789230c2b912e88 ]

Use correct divider registers for the Actions Semi Owl S500 SoC's UART
clocks.

Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/4714d05982b19ac5fec2ed74f54be42d8238e392.1623354574.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix handling of HCI_LE_Advertising_Set_Terminated event

[ Upstream commit 23837a6d7a1a61818ed94a6b8af552d6cf7d32d5 ]

Error status of this event means that it has ended due reasons other
than a connection:

'If advertising has terminated as a result of the advertising duration
elapsing, the Status parameter shall be set to the error code
Advertising Timeout (0x3C).'

'If advertising has terminated because the
Max_Extended_Advertising_Events was reached, the Status parameter
shall be set to the error code Limit Reached (0x43).'

Fixes: acf0aeae431a0 ("Bluetooth: Handle ADv set terminated event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix Set Extended (Scan Response) Data

[ Upstream commit c9ed0a7077306f9d41d74fb006ab5dbada8349c5 ]

These command do have variable length and the length can go up to 251,
so this changes the struct to not use a fixed size and then when
creating the PDU only the actual length of the data send to the
controller.

Fixes: a0fb3726ba551 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix not sending Set Extended Scan Response

[ Upstream commit a76a0d365077711594ce200a9553ed6d1ff40276 ]

Current code is actually failing on the following tests of mgmt-tester
because get_adv_instance_scan_rsp_len did not account for flags that
cause scan response data to be included resulting in non-scannable
instance when in fact it should be scannable.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_valid

[ Upstream commit 799acb9347915bfe4eac0ff2345b468f0a1ca207 ]

This fixes parsing of LTV entries when the length is 0.

Found with:

tools/mgmt-tester -s "Add Advertising - Success (ScRsp only)"

Add Advertising - Success (ScRsp only) - run
  Sending Add Advertising (0x003e)
  Test condition added, total 1
[   11.004577] ==================================================================
[   11.005292] BUG: KASAN: slab-out-of-bounds in tlv_data_is_valid+0x87/0xe0
[   11.005984] Read of size 1 at addr ffff888002c695b0 by task mgmt-tester/87
[   11.006711]
[   11.007176]
[   11.007429] Allocated by task 87:
[   11.008151]
[   11.008438] The buggy address belongs to the object at ffff888002c69580
[   11.008438]  which belongs to the cache kmalloc-64 of size 64
[   11.010526] The buggy address is located 48 bytes inside of
[   11.010526]  64-byte region [ffff888002c69580, ffff888002c695c0)
[   11.012423] The buggy address belongs to the page:
[   11.013291]
[   11.013544] Memory state around the buggy address:
[   11.014359]  ffff888002c69480: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.015453]  ffff888002c69500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.016232] >ffff888002c69580: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
[   11.017010]                                      ^
[   11.017547]  ffff888002c69600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
[   11.018296]  ffff888002c69680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[   11.019116] ==================================================================

Fixes: 2bb36870e8cb2 ("Bluetooth: Unify advertising instance flags check")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "be2net: disable bh with spin_lock in be_process_mcc"

[ Upstream commit d6765985a42a660f078896d5c5b27f97c580a490 ]

Patch was based on wrong presumption that be_poll can be called only
from bh context. It reintroducing old regression (also reverted) and
causing deadlock when we use netconsole with benet in bonding.

Old revert: commit 072a9c486004 ("netpoll: revert 6bdb7fe3104 and fix
be_poll() instead")

[  331.269715] bond0: (slave enp0s7f0): Releasing backup interface
[  331.270121] CPU: 4 PID: 1479 Comm: ifenslave Not tainted 5.13.0-rc7+ #2
[  331.270122] Call Trace:
[  331.270122] [c00000001789f200] [c0000000008c505c] dump_stack+0x100/0x174 (unreliable)
[  331.270124] [c00000001789f240] [c008000001238b9c] be_poll+0x64/0xe90 [be2net]
[  331.270125] [c00000001789f330] [c000000000d1e6e4] netpoll_poll_dev+0x174/0x3d0
[  331.270127] [c00000001789f400] [c008000001bc167c] bond_poll_controller+0xb4/0x130 [bonding]
[  331.270128] [c00000001789f450] [c000000000d1e624] netpoll_poll_dev+0xb4/0x3d0
[  331.270129] [c00000001789f520] [c000000000d1ed88] netpoll_send_skb+0x448/0x470
[  331.270130] [c00000001789f5d0] [c0080000011f14f8] write_msg+0x180/0x1b0 [netconsole]
[  331.270131] [c00000001789f640] [c000000000230c0c] console_unlock+0x54c/0x790
[  331.270132] [c00000001789f7b0] [c000000000233098] vprintk_emit+0x2d8/0x450
[  331.270133] [c00000001789f810] [c000000000234758] vprintk+0xc8/0x270
[  331.270134] [c00000001789f850] [c000000000233c28] printk+0x40/0x54
[  331.270135] [c00000001789f870] [c000000000ccf908] __netdev_printk+0x150/0x198
[  331.270136] [c00000001789f910] [c000000000ccfdb4] netdev_info+0x68/0x94
[  331.270137] [c00000001789f950] [c008000001bcbd70] __bond_release_one+0x188/0x6b0 [bonding]
[  331.270138] [c00000001789faa0] [c008000001bcc6f4] bond_do_ioctl+0x42c/0x490 [bonding]
[  331.270139] [c00000001789fb60] [c000000000d0d17c] dev_ifsioc+0x17c/0x400
[  331.270140] [c00000001789fbc0] [c000000000d0db70] dev_ioctl+0x390/0x890
[  331.270141] [c00000001789fc10] [c000000000c7c76c] sock_do_ioctl+0xac/0x1b0
[  331.270142] [c00000001789fc90] [c000000000c7ffac] sock_ioctl+0x31c/0x6e0
[  331.270143] [c00000001789fd60] [c0000000005b9728] sys_ioctl+0xf8/0x150
[  331.270145] [c00000001789fdb0] [c0000000000336c0] system_call_exception+0x160/0x2f0
[  331.270146] [c00000001789fe10] [c00000000000d35c] system_call_common+0xec/0x278
[  331.270147] --- interrupt: c00 at 0x7fffa6c6ec00
[  331.270147] NIP:  00007fffa6c6ec00 LR: 0000000105c4185c CTR: 0000000000000000
[  331.270148] REGS: c00000001789fe80 TRAP: 0c00   Not tainted  (5.13.0-rc7+)
[  331.270148] MSR:  800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE>  CR: 28000428  XER: 00000000
[  331.270155] IRQMASK: 0
[  331.270156] GPR00: 0000000000000036 00007fffd494d5b0 00007fffa6d57100 0000000000000003
[  331.270158] GPR04: 0000000000008991 00007fffd494d6d0 0000000000000008 00007fffd494f28c
[  331.270161] GPR08: 0000000000000003 0000000000000000 0000000000000000 0000000000000000
[  331.270164] GPR12: 0000000000000000 00007fffa6dfa220 0000000000000000 0000000000000000
[  331.270167] GPR16: 0000000105c44880 0000000000000000 0000000105c60088 0000000105c60318
[  331.270170] GPR20: 0000000105c602c0 0000000105c44560 0000000000000000 0000000000000000
[  331.270172] GPR24: 00007fffd494dc50 00007fffd494d6a8 0000000105c60008 00007fffd494d6d0
[  331.270175] GPR28: 00007fffd494f27e 0000000105c6026c 00007fffd494f284 0000000000000000
[  331.270178] NIP [00007fffa6c6ec00] 0x7fffa6c6ec00
[  331.270178] LR [0000000105c4185c] 0x105c4185c
[  331.270179] --- interrupt: c00

This reverts commit d0d006a43e9a7a796f6f178839c92fcc222c564d.

Fixes: d0d006a43e9a7a ("be2net: disable bh with spin_lock in be_process_mcc")
Signed-off-by: Petr Oros <poros@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Fix swapped vars when fetching max queues

[ Upstream commit 1db1a862a08f85edc36aad091236ac9b818e949e ]

Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: Fix incorrect Packet Lifetime calculation

[ Upstream commit e84045eab69c625bc0b0bf24d8e05bc65da1eed1 ]

An approximation for the PacketLifeTime is half the local ACK timeout.
The encoding for both timers are logarithmic.

If the local ACK timeout is set, but zero, it means the timer is
disabled. In this case, we choose the CMA_IBOE_PACKET_LIFETIME value,
since 50% of infinite makes no sense.

Before this commit, the PacketLifeTime became 255 if local ACK
timeout was zero (not running).

Fixed by explicitly testing for timeout being zero.

Fixes: e1ee1e62bec4 ("RDMA/cma: Use ACK timeout for RoCE packetLifeTime")
Link: https://lore.kernel.org/r/1624371207-26710-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpfilter: Specify the log level for the kmsg message

[ Upstream commit a196fa78a26571359740f701cf30d774eb8a72cb ]

Per the kmsg document [0], if we don't specify the log level with a
prefix "<N>" in the message string, the default log level will be
applied to the message. Since the default level could be warning(4),
this would make the log utility such as journalctl treat the message,
"Started bpfilter", as a warning. To avoid confusion, this commit
adds the prefix "<5>" to make the message always a notice.

[0] https://www.kernel.org/doc/Documentation/ABI/testing/dev-kmsg

Fixes: 36c4357c63f3 ("net: bpfilter: print umh messages to /dev/kmsg")
Reported-by: Martin Loviska <mloviska@suse.com>
Signed-off-by: Gary Lin <glin@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Link: https://lore.kernel.org/bpf/20210623040918.8683-1-glin@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: sja1105: fix NULL pointer dereference in sja1105_reload_cbs()

[ Upstream commit be7f62eebaff2f86c1467a2d33930a0a7a87675b ]

priv->cbs is an array of priv->info->num_cbs_shapers elements of type
struct sja1105_cbs_entry which only get allocated if CONFIG_NET_SCH_CBS
is enabled.

However, sja1105_reload_cbs() is called from sja1105_static_config_reload()
which in turn is called for any of the items in sja1105_reset_reasons,
therefore during the normal runtime of the driver and not just from a
code path which can be triggered by the tc-cbs offload.

The sja1105_reload_cbs() function does not contain a check whether the
priv->cbs array is NULL or not, it just assumes it isn't and proceeds to
iterate through the credit-based shaper elements. This leads to a NULL
pointer dereference.

The solution is to return success if the priv->cbs array has not been
allocated, since sja1105_reload_cbs() has nothing to do.

Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e1000e: Check the PCIm state

[ Upstream commit 2e7256f12cdb16eaa2515b6231d665044a07c51a ]

Complete to commit def4ec6dce393e ("e1000e: PCIm function state support")
Check the PCIm state only on CSME systems. There is no point to do this
check on non CSME systems.
This patch fixes a generation a false-positive warning:
"Error in exiting dmoff"

Fixes: def4ec6dce39 ("e1000e: PCIm function state support")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: fix out-of-bound access in ip6_parse_tlv()

[ Upstream commit 624085a31c1ad6a80b1e53f686bf6ee92abbf6e8 ]

First problem is that optlen is fetched without checking
there is more than one byte to parse.

Fix this by taking care of IPV6_TLV_PAD1 before
fetching optlen (under appropriate sanity checks against len)

Second problem is that IPV6_TLV_PADN checks of zero
padding are performed before the check of remaining length.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: c1412fce7ecc ("net/ipv6/exthdrs.c: Strict PadN option checking")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: atlantic: fix the macsec key length

[ Upstream commit d67fb4772d9a6cfd10f1109f0e7b1e6eb58c8e16 ]

The key length used to store the macsec key was set to MACSEC_KEYID_LEN
(16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.

Fix this by using MACSEC_MAX_KEY_LEN instead (the max length accepted in
uAPI).

Fixes: 27736563ce32 ("net: atlantic: MACSec egress offload implementation")
Fixes: 9ff40a751a6f ("net: atlantic: MACSec ingress offload implementation")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: mscc: fix macsec key length

[ Upstream commit c309217f91f2d2097c2a0a832d9bff50b88c81dc ]

The key length used to store the macsec key was set to MACSEC_KEYID_LEN
(16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.

Fix this by using MACSEC_MAX_KEY_LEN instead (the max length accepted in
uAPI).

Fixes: 28c5107aa904 ("net: phy: mscc: macsec support")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macsec: fix the length used to copy the key for offloading

[ Upstream commit 1f7fe5121127e037b86592ba42ce36515ea0e3f7 ]

The key length used when offloading macsec to Ethernet or PHY drivers
was set to MACSEC_KEYID_LEN (16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.

Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length
accepted in uAPI) and secy->key_len to copy it.

Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: Protect RMW with qp_mutex

[ Upstream commit ca0c448d2b9f43e3175835d536853854ef544e22 ]

The struct rdma_id_private contains three bit-fields, tos_set,
timeout_set, and min_rnr_timer_set. These are set by accessor functions
without any synchronization. If two or all accessor functions are invoked
in close proximity in time, there will be Read-Modify-Write from several
contexts to the same variable, and the result will be intermittent.

Fixed by protecting the bit-fields by the qp_mutex in the accessor
functions.

The consumer of timeout_set and min_rnr_timer_set is in
rdma_init_qp_attr(), which is called with qp_mutex held for connected
QPs. Explicit locking is added for the consumers of tos and tos_set.

This commit depends on ("RDMA/cma: Remove unnecessary INIT->INIT
transition"), since the call to rdma_init_qp_attr() from
cma_init_conn_qp() does not hold the qp_mutex.

Fixes: 2c1619edef61 ("IB/cma: Define option to set ack timeout and pack tos_set")
Fixes: 3aeffc46afde ("IB/cma: Introduce rdma_set_min_rnr_timer()")
Link: https://lore.kernel.org/r/1624369197-24578-3-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: free tx_pool if tso_pool alloc fails

[ Upstream commit f6ebca8efa52e4ae770f0325d618e7bcf08ada0c ]

Free tx_pool and clear it, if allocation of tso_pool fails.

release_tx_pools() assumes we have both tx and tso_pools if ->tx_pool is
non-NULL. If allocation of tso_pool fails in init_tx_pools(), the assumption
will not be true and we would end up dereferencing ->tx_buff, ->free_map
fields from a NULL pointer.

Fixes: 3205306c6b8d ("ibmvnic: Update TX pool initialization routine")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: set ltb->buff to NULL after freeing

[ Upstream commit 552a33729f1a7cc5115d0752064fe9abd6e3e336 ]

free_long_term_buff() checks ltb->buff to decide whether we have a long
term buffer to free. So set ltb->buff to NULL afer freeing. While here,
also clear ->map_id, fix up some coding style and log an error.

Fixes: 9c4eaabd1bb39 ("Check CRQ command return codes")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "ibmvnic: remove duplicate napi_schedule call in open function"

[ Upstream commit 2ca220f92878470c6ba03f9946e412323093cc94 ]

This reverts commit 7c451f3ef676c805a4b77a743a01a5c21a250a73.

When a vnic interface is taken down and then up, connectivity is not
restored. We bisected it to this commit. Reverting this commit until
we can fully investigate the issue/benefit of the change.

Fixes: 7c451f3ef676 ("ibmvnic: remove duplicate napi_schedule call in open function")
Reported-by: Cristobal Forno <cforno12@linux.ibm.com>
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix missing rtnl locking when setting up pf switch

[ Upstream commit 956e759d5f8e0859e86b951a8779c60af633aafd ]

A recent change that made i40e use new udp_tunnel infrastructure
uses a method that expects to be called under rtnl lock.

However, not all codepaths do the lock prior to calling
i40e_setup_pf_switch.

Fix that by adding additional rtnl locking and unlocking.

Fixes: 40a98cb6f01f ("i40e: convert to new udp_tunnel infrastructure")
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix autoneg disabling for non-10GBaseT links

[ Upstream commit 9262793e59f0423437166a879a73d056b1fe6f9a ]

Disabling autonegotiation was allowed only for 10GBaseT PHY.
The condition was changed to check if link media type is BaseT.

Fixes: 3ce12ee9d8f9 ("i40e: Fix order of checks when enabling/disabling autoneg in ethtool")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Karen Sornek <karen.sornek@intel.com>
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix error handling in i40e_vsi_open

[ Upstream commit 9c04cfcd4aad232e36306cdc5c74cd9fc9148a7e ]

When vsi->type == I40E_VSI_FDIR, we have caught the return value of
i40e_vsi_request_irq() but without further handling. Check and execute
memory clean on failure just like the other i40e_vsi_request_irq().

Fixes: 8a9eb7d3cbcab ("i40e: rework fdir setup and teardown")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Do not change gso_size during bpf_skb_change_proto()

[ Upstream commit 364745fbe981a4370f50274475da4675661104df ]

This is technically a backwards incompatible change in behaviour, but I'm
going to argue that it is very unlikely to break things, and likely to fix
*far* more then it breaks.

In no particular order, various reasons follow:

(a) I've long had a bug assigned to myself to debug a super rare kernel crash
on Android Pixel phones which can (per stacktrace) be traced back to BPF clat
IPv6 to IPv4 protocol conversion causing some sort of ugly failure much later
on during transmit deep in the GSO engine, AFAICT precisely because of this
change to gso_size, though I've never been able to manually reproduce it. I
believe it may be related to the particular network offload support of attached
USB ethernet dongle being used for tethering off of an IPv6-only cellular
connection. The reason might be we end up with more segments than max permitted,
or with a GSO packet with only one segment... (either way we break some
assumption and hit a BUG_ON)

(b) There is no check that the gso_size is > 20 when reducing it by 20, so we
might end up with a negative (or underflowing) gso_size or a gso_size of 0.
This can't possibly be good. Indeed this is probably somehow exploitable (or
at least can result in a kernel crash) by delivering crafted packets and perhaps
triggering an infinite loop or a divide by zero... As a reminder: gso_size (MSS)
is related to MTU, but not directly derived from it: gso_size/MSS may be
significantly smaller then one would get by deriving from local MTU. And on
some NICs (which do loose MTU checking on receive, it may even potentially be
larger, for example my work pc with 1500 MTU can receive 1520 byte frames [and
sometimes does due to bugs in a vendor plat46 implementation]). Indeed even just
going from 21 to 1 is potentially problematic because it increases the number
of segments by a factor of 21 (think DoS, or some other crash due to too many
segments).

(c) It's always safe to not increase the gso_size, because it doesn't result in
the max packet size increasing.  So the skb_increase_gso_size() call was always
unnecessary for correctness (and outright undesirable, see later). As such the
only part which is potentially dangerous (ie. could cause backwards compatibility
issues) is the removal of the skb_decrease_gso_size() call.

(d) If the packets are ultimately destined to the local device, then there is
absolutely no benefit to playing around with gso_size. It only matters if the
packets will egress the device. ie. we're either forwarding, or transmitting
from the device.

(e) This logic only triggers for packets which are GSO. It does not trigger for
skbs which are not GSO. It will not convert a non-GSO MTU sized packet into a
GSO packet (and you don't even know what the MTU is, so you can't even fix it).
As such your transmit path must *already* be able to handle an MTU 20 bytes
larger then your receive path (for IPv4 to IPv6 translation) - and indeed 28
bytes larger due to IPv4 fragments. Thus removing the skb_decrease_gso_size()
call doesn't actually increase the size of the packets your transmit side must
be able to handle. ie. to handle non-GSO max-MTU packets, the IPv4/IPv6 device/
route MTUs must already be set correctly. Since for example with an IPv4 egress
MTU of 1500, IPv4 to IPv6 translation will already build 1520 byte IPv6 frames,
so you need a 1520 byte device MTU. This means if your IPv6 device's egress
MTU is 1280, your IPv4 route must be 1260 (and actually 1252, because of the
need to handle fragments). This is to handle normal non-GSO packets. Thus the
reduction is simply not needed for GSO packets, because when they're correctly
built, they will already be the right size.

(f) TSO/GSO should be able to exactly undo GRO: the number of packets (TCP
segments) should not be modified, so that TCP's MSS counting works correctly
(this matters for congestion control). If protocol conversion changes the
gso_size, then the number of TCP segments may increase or decrease. Packet loss
after protocol conversion can result in partial loss of MSS segments that the
sender sent. How's the sending TCP stack going to react to receiving ACKs/SACKs
in the middle of the segments it sent?

(g) skb_{decrease,increase}_gso_size() are already no-ops for GSO_BY_FRAGS
case (besides triggering WARN_ON_ONCE). This means you already cannot guarantee
that gso_size (and thus resulting packet MTU) is changed. ie. you must assume
it won't be changed.

(h) changing gso_size is outright buggy for UDP GSO packets, where framing
matters (I believe that's also the case for SCTP, but it's already excluded
by [g]).  So the only remaining case is TCP, which also doesn't want it
(see [f]).

(i) see also the reasoning on the previous attempt at fixing this
(commit fa7b83bf3b156c767f3e4a25bbf3817b08f3ff8e) which shows that the current
behaviour causes TCP packet loss:

  In the forwarding path GRO -> BPF 6 to 4 -> GSO for TCP traffic, the
  coalesced packet payload can be > MSS, but < MSS + 20.

  bpf_skb_proto_6_to_4() will upgrade the MSS and it can be > the payload
  length. After then tcp_gso_segment checks for the payload length if it
  is <= MSS. The condition is causing the packet to be dropped.

  tcp_gso_segment():
    [...]
    mss = skb_shinfo(skb)->gso_size;
    if (unlikely(skb->len <= mss)) goto out;
    [...]

Thus changing the gso_size is simply a very bad idea. Increasing is unnecessary
and buggy, and decreasing can go negative.

Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dongseok Yi <dseok.yi@samsung.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/CANP3RGfjLikQ6dg=YpBU0OeHvyv7JOki7CyOUS9modaXAi-9vQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210617000953.2787453-2-zenczykowski@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: j1939: j1939_sk_setsockopt(): prevent allocation of j1939 filter for optlen == 0

[ Upstream commit aaf473d0100f64abc88560e2bea905805bcf2a8e ]

If optval != NULL and optlen == 0 are specified for SO_J1939_FILTER in
j1939_sk_setsockopt(), memdup_sockptr() will return ZERO_PTR for 0
size allocation. The new filter will be mistakenly assigned ZERO_PTR.
This patch checks for optlen != 0 and filter will be assigned NULL in
case of optlen == 0.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/r/20210620123842.117975-1-nslusarek@gmx.net
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: exthdrs: do not blindly use init_net

[ Upstream commit bcc3f2a829b9edbe3da5fb117ee5a63686d31834 ]

I see no reason why max_dst_opts_cnt and max_hbh_opts_cnt
are fetched from the initial net namespace.

The other sysctls (max_dst_opts_len & max_hbh_opts_len)
are in fact already using the current ns.

Note: it is not clear why ipv6_destopt_rcv() use two ways to
get to the netns :

1) dev_net(dst->dev)
Originally used to increment IPSTATS_MIB_INHDRERRORS

2) dev_net(skb->dev)
Tom used this variant in his patch.

Maybe this calls to use ipv6_skb_net() instead ?

Fixes: 47d3d7ac656a ("ipv6: Implement limits on Hop-by-Hop and Destination options")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@quantonium.net>
Cc: Coco Li <lixiaoyan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>