correct changelog

From-SVN: r196885

tree.h (VECTOR_TYPE_P): New macro.

2013-03-21  Marc Glisse  <marc.glisse@inria.fr>

gcc/
* tree.h (VECTOR_TYPE_P): New macro.
(VECTOR_INTEGER_TYPE_P, VECTOR_FLOAT_TYPE_P, FLOAT_TYPE_P,
TYPE_MODE): Use it.
* fold-const.c (fold_cond_expr_with_comparison): Use build_zero_cst.
VEC_COND_EXPR cannot be lvalues.
(fold_ternary_loc) <VEC_COND_EXPR>: Merge with the COND_EXPR case.

gcc/cp/
* call.c (build_conditional_expr_1): Fold VEC_COND_EXPR.

gcc/testsuite/
* g++.dg/ext/vector21.C: New testcase.

From-SVN: r196884

simplify-rtx.c (simplify_binary_operation_1): Restrict the transformation to equal modes.

2013-03-21  Marc Glisse  <marc.glisse@inria.fr>

* simplify-rtx.c (simplify_binary_operation_1) <VEC_CONCAT>:
Restrict the transformation to equal modes.

From-SVN: r196882

Add forgotten ChangeLog line.

From-SVN: r196879

re PR middle-end/39326 (Segmentation fault with -O1, out of memory with -O2)

2013-03-21  Richard Biener  <rguenther@suse.de>

PR tree-optimization/39326
* tree-ssa-loop-im.c (UNANALYZABLE_MEM_ID): New define.
(MEM_ANALYZABLE): Adjust.
(record_mem_ref_loc): Move bitmap ops ...
(gather_mem_refs_stmt): ... here.  Use the shared mem-ref for
unanalyzable refs, do not record locations for it.
(analyze_memory_references): Allocate ref zero as shared
unanalyzable ref.
(refs_independent_p): Do not test for unanalyzed mems here.
(ref_indep_loop_p_1): Special-case disambiguation against
the unanalyzed ref.
(ref_indep_loop_p): Assert we are not queried for the
unanalyzed mem.

From-SVN: r196878

[ARM] Turning off 64bits ops in Neon

2013-03-21  Christophe Lyon  <christophe.lyon@linaro.org>

gcc/
* config/arm/arm-protos.h (tune_params): Add
prefer_neon_for_64bits field.
* config/arm/arm.c (prefer_neon_for_64bits): New variable.
(arm_slowmul_tune): Default prefer_neon_for_64bits to false.
(arm_fastmul_tune, arm_strongarm_tune, arm_xscale_tune): Ditto.
(arm_9e_tune, arm_v6t2_tune, arm_cortex_tune): Ditto.
(arm_cortex_a15_tune, arm_cortex_a5_tune): Ditto.
(arm_cortex_a9_tune, arm_v6m_tune, arm_fa726te_tune): Ditto.
(arm_option_override): Handle -mneon-for-64bits new option.
* config/arm/arm.h (TARGET_PREFER_NEON_64BITS): New macro.
(prefer_neon_for_64bits): Declare new variable.
* config/arm/arm.md (arch): Rename neon_onlya8 and neon_nota8 to
avoid_neon_for_64bits and neon_for_64bits. Remove onlya8 and
nota8.
(arch_enabled): Handle new arch types. Remove support for onlya8
and nota8.
(one_cmpldi2): Use new arch names.
* config/arm/arm.opt (mneon-for-64bits): Add option.
* config/arm/neon.md (adddi3_neon, subdi3_neon, iordi3_neon)
(anddi3_neon, xordi3_neon, ashldi3_neon, <shift>di3_neon): Use
neon_for_64bits instead of nota8 and avoid_neon_for_64bits instead
of onlya8.
* doc/invoke.texi (-mneon-for-64bits): Document.

gcc/testsuite:
* gcc.target/arm/neon-for-64bits-1.c: New tests.
* gcc.target/arm/neon-for-64bits-2.c: Likewise.

From-SVN: r196876

re PR middle-end/39326 (Segmentation fault with -O1, out of memory with -O2)

2013-03-21  Richard Biener  <rguenther@suse.de>

PR tree-optimization/39326
* tree-ssa-loop-im.c (bb_loop_postorder): New global static.
(sort_bbs_in_loop_postorder_cmp): New function.
(gather_mem_refs_in_loops): Assign mem-ref IDs in loop
postorder.

From-SVN: r196874

tree-vect-data-refs.c (vect_update_interleaving_chain): Remove.

2013-03-21  Richard Biener  <rguenther@suse.de>

* tree-vect-data-refs.c (vect_update_interleaving_chain): Remove.
(vect_insert_into_interleaving_chain): Likewise.
(vect_drs_dependent_in_basic_block): Inline ...
(vect_slp_analyze_data_ref_dependence): ... here.  New function,
split out from ...
(vect_analyze_data_ref_dependence): ... here.  Simplify.
(vect_check_interleaving): Simplify.
(vect_analyze_data_ref_dependences): Likewise.  Split out ...
(vect_slp_analyze_data_ref_dependences): ... this new function.
(dr_group_sort_cmp): New function.
(vect_analyze_data_ref_accesses): Compute data-reference groups
here instead of in vect_analyze_data_ref_dependence.  Use
a more efficient algorithm.
* tree-vect-slp.c (vect_slp_analyze_bb_1): Use
vect_slp_analyze_data_ref_dependences.  Call
vect_analyze_data_ref_accesses earlier.
* tree-vect-loop.c (vect_analyze_loop_2): Likewise.
* tree-vectorizer.h (vect_analyze_data_ref_dependences): Adjust.
(vect_slp_analyze_data_ref_dependences): New prototype.

* gcc.dg/vect/vect-outer-3a-big-array.c: Adjust.
* gcc.dg/vect/vect-outer-3a.c: Likewise.

From-SVN: r196872

* ChangeLog: Fix whitespace.

From-SVN: r196871

tree-ssa-loop-im.c (can_sm_ref_p): Do not test whether ref is stored in the loop.

2013-03-21  Richard Biener  <rguenther@suse.de>

* tree-ssa-loop-im.c (can_sm_ref_p): Do not test whether
ref is stored in the loop.
(find_refs_for_sm): Walk only over all stores.
(store_motion_loop): Allocate from lim_bitmap_obstack.
(store_motion): Likewise.

From-SVN: r196870

tree-vect-loop-manip.c (slpeel_tree_peel_loop_to_edge): Update virtual SSA form.

2013-03-21  Richard Biener  <rguenther@suse.de>

* tree-vect-loop-manip.c (slpeel_tree_peel_loop_to_edge):
Update virtual SSA form.

From-SVN: r196868

Default to DWARF 4 on Solaris if linker supports CIEv3

* configure.ac (gcc_cv_ld_eh_frame_ciev3): New test.
* configure: Regenerate.
* config.in: Regenerate.
* config/sol2.c (solaris_override_options): Only enforce DWARF 2
if !HAVE_LD_EH_FRAME_CIEV3.

From-SVN: r196866

tree-cfg.c (verify_expr_no_block): New function.

2013-03-21  Richard Biener  <rguenther@suse.de>

* tree-cfg.c (verify_expr_no_block): New function.
(verify_expr_location_1): Verify that neither DECL_DEBUG_EXPR
nor DECL_VALUE_EXPR have locations with associated blocks.
* tree-ssa-live.c (clear_unused_block_pointer_1): Remove.
(clear_unused_block_pointer): Remove code dealing with
blocks in DECL_DEBUG_EXPR locations.

From-SVN: r196865

tree.h (DECL_DEBUG_EXPR_IS_FROM): Rename to ...

2013-03-21  Richard Biener  <rguenther@suse.de>

* tree.h (DECL_DEBUG_EXPR_IS_FROM): Rename to ...
(DECL_HAS_DEBUG_EXPR_P): ... this.  Guard properly.
* tree.c (copy_node_stat): Do not copy DECL_HAS_DEBUG_EXPR_P.
* dwarf2out.c (add_var_loc_to_decl): Use DECL_HAS_DEBUG_EXPR_P
instead of DECL_DEBUG_EXPR_IS_FROM.
* gimplify.c (gimplify_modify_expr): Likewise.
* tree-cfg.c (verify_expr_location_1): Likewise.
* tree-complex.c (create_one_component_var): Likewise.
* tree-sra.c (create_access_replacement): Likewise.
* tree-ssa-live.c (clear_unused_block_pointer_1): Likewise.
(clear_unused_block_pointer): Likewise.
* tree-streamer-in.c (unpack_ts_decl_common_value_fields): Likewise.
* tree-streamer-out.c (pack_ts_decl_common_value_fields): Likewise.
* var-tracking.c (var_debug_decl): Likewise.
(track_expr_p): Likewise.
* tree-inline.c (add_local_variables): Likewise.  Set
DECL_HAS_DEBUG_EXPR_P after copying it.
* tree-diagnostic.c (default_tree_printer): Use DECL_HAS_DEBUG_EXPR_P
instead of DECL_DEBUG_EXPR_IS_FROM.  Guard properly.

c/
* c-objc-common.c (c_tree_printer): Use DECL_HAS_DEBUG_EXPR_P
instead of DECL_DEBUG_EXPR_IS_FROM.  Guard properly.

cp/
* error.c (cp_printer): Use DECL_HAS_DEBUG_EXPR_P instead of
DECL_DEBUG_EXPR_IS_FROM.  Guard properly.

From-SVN: r196864

re PR bootstrap/56656 (Suffix or operands invalid for 'movq')

PR bootstrap/56656
* configure.ac (HAVE_AS_IX86_INTERUNIT_MOVQ): New test.
* configure: Regenerate.
* config.in: Regenerate.
* config/i386/i386.md (*movdf_internal): Use
HAVE_AS_IX86_INTERUNIT_MOVQ to handle broken assemblers that require
movd instead of movq mnemonic for interunit moves.
(*movdi_internal): Ditto.

From-SVN: r196861

aarch64-simd.md (simd_fabd): New Attribute.

2013-03-21   Naveen H.S  <Naveen.Hurugalawadi@caviumnetworks.com>

* config/aarch64/aarch64-simd.md (simd_fabd): New Attribute.
(abd<mode>_3): New pattern.
(aba<mode>_3): New pattern.
(fabd<mode>_3): New pattern.

2013-03-21   Naveen H.S  <Naveen.Hurugalawadi@caviumnetworks.com>

* gcc.target/aarch64/vect.c: Test and result vector added
for sabd and saba instructions.
* gcc.target/aarch64/vect-compile.c: Check for sabd and saba
instructions in assembly.
* gcc.target/aarch64/vect.x: Add sabd and saba test functions.
* gcc.target/aarch64/vect-fp.c: Test and result vector added
for fabd instruction.
* gcc.target/aarch64/vect-fp-compile.c: Check for fabd
instruction in assembly.
* gcc.target/aarch64/vect-fp.x: Add fabd test function.

From-SVN: r196858

aarch64-elf.h (REGISTER_PREFIX): Remove.

2013-03-21   Naveen H.S  <Naveen.Hurugalawadi@caviumnetworks.com>

* config/aarch64/aarch64-elf.h (REGISTER_PREFIX): Remove.
* config/aarch64/aarch64.c (aarch64_print_operand): Remove all
occurrence of REGISTER_PREFIX as its empty string.

From-SVN: r196856

tree-ssa-dom.c (record_equivalences_from_incoming_edge): Record addititional equivalences for equality comparisons between an SSA_NAME...

* tree-ssa-dom.c (record_equivalences_from_incoming_edge): Record
addititional equivalences for equality comparisons between an SSA_NAME
and a constant where the SSA_NAME was set from a widening conversion.

* g++.dg/tree-ssa/ssa-dom.C: New test.

From-SVN: r196855

re PR c++/56646 (ICE: in cp_parser_late_return_type_opt, at cp/parser.c:16970)

PR c++/56646
* parser.c (cp_parser_late_return_type_opt): Save and restore
current_class_ptr/ref.

From-SVN: r196853

re PR c++/54532 ([C++0x][constexpr] internal error when initializing static constexpr with pointer to non-static member variable)

PR c++/54532
* expr.c (cplus_expand_constant): Do nothing if the class is
incomplete.
* semantics.c (reduced_constant_expression_p): Allow PTRMEM_CST.
* typeck2.c (store_init_value): Use reduced_constant_expression_p.
* decl.c (maybe_register_incomplete_var): Handle PTRMEM_CST.
(complete_vars): Likewise.

From-SVN: r196852

name-lookup.c (get_anonymous_namespace_name): Never use get_file_function_name.

* name-lookup.c (get_anonymous_namespace_name): Never use
get_file_function_name.

From-SVN: r196851

* pt.c (retrieve_specialization): Handle null tmpl argument.

From-SVN: r196850

re PR c++/17232 ([DR 1640] classes and class template specializations treated differently w.r.t. core issue #337)

PR c++/17232
PR c++/56642
* pt.c (tsubst_decl): Check return value of register_specialization.
* typeck2.c (abstract_virtuals_error_sfinae): Re-apply complete_type
change.

From-SVN: r196849

Add an atomic test and set pattern on tilegx.

      * config/tilegx/sync.md (atomic_test_and_set): New pattern.

From-SVN: r196848

Daily bump.

From-SVN: r196847

2013-03-20  Robert Mason  <rbmj@verizon.net>

* config/vxlib-tls.c (__gthread_get_tsd_data,)
(__gthread_set_tsd_data, __gthread_enter_tsd_dtor_context,)
(__gthread_leave_tsd_dtor_context): Add prototypes.
(tls_delete_hook): Update.

From-SVN: r196842

i386.md (*movoi_internal_avx): Emit insn template depending on type attribute.

* config/i386/i386.md (*movoi_internal_avx): Emit insn template
depending on type attribute.
(*movti_internal): Ditto.
(*movtf_internal): Ditto.
(*movxf_internal): Ditto.
(*movdf_internal): Ditto.
(*movsf_internal): Ditto.

From-SVN: r196841

i386.md (*movti_internal): Set prefix attribute to maybe_vex for sselog1 and ssemov types.

* config/i386/i386.md (*movti_internal): Set prefix attribute to
maybe_vex for sselog1 and ssemov types.
(*movdi_internal): Reorder operand constraints.
(*movsi_internal): Ditto.  Set prefix attribute to
maybe_vex for sselog1 and ssemov types.
(*movtf_internal): Set prefix attribute to maybe_vex
for sselog1 and ssemov types.
(*movdf_internal): Ditto.  Set prefix_data16 attribute for
DImode ssemov types.  Reorder operand constraints.
(*movsf_internal): Set type of alternatives 3,4 to imov.  Set prefix
attribute to maybe_vex for sselog1 and ssemov types.  Set prefix_data16
attribute for SImode ssemov types.  Reorder operand constraints.

From-SVN: r196834

params.def (PARAM_IPA_CP_ARRAY_INDEX_HINT_BONUS): New parameter.

2013-03-20  Martin Jambor  <mjambor@suse.cz>

* params.def (PARAM_IPA_CP_ARRAY_INDEX_HINT_BONUS): New parameter.
* ipa-cp.c (hint_time_bonus): Add abonus for known array indices.

From-SVN: r196832

predicates.md (indexed_address, [...]): New predicates.

[gcc]
2013-03-20  Pat Haugen <pthaugen@us.ibm.com>

* config/rs6000/predicates.md (indexed_address, update_address_mem
update_indexed_address_mem): New predicates.
* config/rs6000/vsx.md (vsx_extract_<mode>_zero): Set correct "type"
attribute for load/store instructions.
* config/rs6000/dfp.md (movsd_store): Likewise.
(movsd_load): Likewise.
* config/rs6000/rs6000.md (zero_extend<mode>di2_internal1): Likewise.
(unnamed HI->DI extend define_insn): Likewise.
(unnamed SI->DI extend define_insn): Likewise.
(unnamed QI->SI extend define_insn): Likewise.
(unnamed QI->HI extend define_insn): Likewise.
(unnamed HI->SI extend define_insn): Likewise.
(unnamed HI->SI extend define_insn): Likewise.
(extendsfdf2_fpr): Likewise.
(movsi_internal1): Likewise.
(movsi_internal1_single): Likewise.
(movhi_internal): Likewise.
(movqi_internal): Likewise.
(movcc_internal1): Correct mnemonic for stw insn. Set correct "type"
attribute for load/store instructions.
(mov<mode>_hardfloat): Set correct "type" attribute for load/store
instructions.
(mov<mode>_softfloat): Likewise.
(mov<mode>_hardfloat32): Likewise.
(mov<mode>_hardfloat64): Likewise.
(mov<mode>_softfloat64): Likewise.
(movdi_internal32): Likewise.
(movdi_internal64): Likewise.
(probe_stack_<mode>): Likewise.

2013-03-20  Michael Meissner  <meissner@linux.vnet.ibm.com>

* config/rs6000/vector.md (VEC_R): Add 32-bit integer, binary
floating point, and decimal floating point to reload iterator.

* config/rs6000/constraints.md (wl constraint): New constraints to
return FLOAT_REGS if certain options are used to reduce the number
of separate patterns that exist in the file.
(wx constraint): Likewise.
(wz constraint): Likewise.

* config/rs6000/rs6000.c (rs6000_debug_reg_global): If
-mdebug=reg, print wg, wl, wx, and wz constraints.
(rs6000_init_hard_regno_mode_ok): Initialize new constraints.
Initialize the reload functions for 64-bit binary/decimal floating
point types.
(reg_offset_addressing_ok_p): If we are on a power7 or later, use
LFIWZX and STFIWX to load/store 32-bit decimal types, and don't
create the buffer on the stack to overcome not having a 32-bit
load and store.
(rs6000_emit_move): Likewise.
(rs6000_secondary_memory_needed_rtx): Likewise.
(rs6000_alloc_sdmode_stack_slot): Likewise.
(rs6000_preferred_reload_class): On VSX, we can create SFmode 0.0f
via xxlxor, just like DFmode 0.0.

* config/rs6000/rs6000.h (TARGET_NO_SDMODE_STACK): New macro,
define as 1 if we are running on a power7 or newer.
(enum r6000_reg_class_enum): Add new constraints.

* config/rs6000/dfp.md (movsd): Delete, combine with binary
floating point moves in rs6000.md.  Combine power6x (mfpgpr) moves
with other moves by using conditional constraits (wg).  Use LFIWZX
and STFIWX for loading SDmode on power7.  Use xxlxor to create
0.0f.
(movsd splitter): Likewise.
(movsd_hardfloat): Likewise.
(movsd_softfloat): Likewise.

* config/rs6000/rs6000.md (FMOVE32): New iterators to combine
binary and decimal floating point moves.
(fmove_ok): New attributes to combine binary and decimal floating
point moves, and to combine power6x (mfpgpr) moves along normal
floating moves.
(real_value_to_target): Likewise.
(f32_lr): Likewise.
(f32_lm): Likewise.
(f32_li): Likewise.
(f32_sr): Likewise.
(f32_sm): Likewise.
(f32_si): Likewise.
(movsf): Combine binary and decimal floating point moves.  Combine
power6x (mfpgpr) moves with other moves by using conditional
constraits (wg).  Use LFIWZX and STFIWX for loading SDmode on
power7.
(mov<mode> for SFmode/SDmode); Likewise.
(SFmode/SDmode splitters): Likewise.
(movsf_hardfloat): Likewise.
(mov<mode>_hardfloat for SFmode/SDmode): Likewise.
(movsf_softfloat): Likewise.
(mov<mode>_softfloat for SFmode/SDmode): Likewise.

* doc/md.texi (PowerPC and IBM RS6000 constraints): Document wl,
wx and wz constraints.

* config/rs6000/constraints.md (wg constraint): New constraint to
return FLOAT_REGS if -mmfpgpr (power6x) was used.

* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Add wg
constraint.

* config/rs6000/rs6000.c (rs6000_debug_reg_global): If
-mdebug=reg, print wg, wl, wx, and wz constraints.
(rs6000_init_hard_regno_mode_ok): Initialize new constraints.
Initialize the reload functions for 64-bit binary/decimal floating
point types.
(reg_offset_addressing_ok_p): If we are on a power7 or later, use
LFIWZX and STFIWX to load/store 32-bit decimal types, and don't
create the buffer on the stack to overcome not having a 32-bit
load and store.
(rs6000_emit_move): Likewise.
(rs6000_secondary_memory_needed_rtx): Likewise.
(rs6000_alloc_sdmode_stack_slot): Likewise.
(rs6000_preferred_reload_class): On VSX, we can create SFmode 0.0f
via xxlxor, just like DFmode 0.0.

* config/rs6000/dfp.md (movdd): Delete, combine with binary
floating point moves in rs6000.md.  Combine power6x (mfpgpr) moves
with other moves by using conditional constraits (wg).  Use LFIWZX
and STFIWX for loading SDmode on power7.
(movdd splitters): Likewise.
(movdd_hardfloat32): Likewise.
(movdd_softfloat32): Likewise.
(movdd_hardfloat64_mfpgpr): Likewise.
(movdd_hardfloat64): Likewise.
(movdd_softfloat64): Likewise.

* config/rs6000/rs6000.md (FMOVE64): New iterators to combine
64-bit binary and decimal floating point moves.
(FMOVE64X): Likewise.
(movdf): Combine 64-bit binary and decimal floating point moves.
Combine power6x (mfpgpr) moves with other moves by using
conditional constraits (wg).
(mov<mode> for DFmode/DDmode): Likewise.
(DFmode/DDmode splitters): Likewise.
(movdf_hardfloat32): Likewise.
(mov<mode>_hardfloat32 for DFmode/DDmode): Likewise.
(movdf_softfloat32): Likewise.
(movdf_hardfloat64_mfpgpr): Likewise.
(movdf_hardfloat64): Likewise.
(mov<mode>_hardfloat64 for DFmode/DDmode): Likewise.
(movdf_softfloat64): Likewise.
(mov<mode>_softfloat64 for DFmode/DDmode): Likewise.
(reload_<mode>_load): Move to later in the file so they aren't in
the middle of the floating point move insns.
(reload_<mode>_store): Likewise.

* doc/md.texi (PowerPC and IBM RS6000 constraints): Document wg
constraint.

* config/rs6000/rs6000.c (rs6000_debug_reg_global): Print out wg
constraint if -mdebug=reg.
(rs6000_initi_hard_regno_mode_ok): Enable wg constraint if
-mfpgpr.  Enable using dd reload support if needed.

* config/rs6000/dfp.md (movtd): Delete, combine with 128-bit
binary and decimal floating point moves in rs6000.md.
(movtd_internal): Likewise.

* config/rs6000/rs6000.md (FMOVE128): Combine 128-bit binary and
decimal floating point moves.
(movtf): Likewise.
(movtf_internal): Likewise.
(mov<mode>_internal, TDmode/TFmode): Likewise.
(movtf_softfloat): Likewise.
(mov<mode>_softfloat, TDmode/TFmode): Likewise.

* config/rs6000/rs6000.md (movdi_mfpgpr): Delete, combine with
movdi_internal64, using wg constraint for move direct operations.
(movdi_internal64): Likewise.

* config/rs6000/rs6000.c (rs6000_debug_reg_global): Print
MODES_TIEABLE_P for selected modes.  Print the numerical value of
the various virtual registers. Use GPR/FPR first/last values,
instead of hard coding the register numbers.  Print which modes
have reload functions registered.
(rs6000_option_override_internal): If -mdebug=reg, trace the
options settings before/after setting cpu, target and subtarget
settings.
(rs6000_secondary_reload_trace): Improve the RTL dump for
-mdebug=addr and for secondary reload failures in
rs6000_secondary_reload_inner.
(rs6000_secondary_reload_fail): Likewise.
(rs6000_secondary_reload_inner): Likewise.

* config/rs6000/rs6000.md (FIRST_GPR_REGNO): Add convenience
macros for first/last GPR and FPR registers.
(LAST_GPR_REGNO): Likewise.
(FIRST_FPR_REGNO): Likewise.
(LAST_FPR_REGNO): Likewise.

* config/rs6000/vector.md (mul<mode>3): Use the combined macro
VECTOR_UNIT_ALTIVEC_OR_VSX_P instead of separate calls to
VECTOR_UNIT_ALTIVEC_P and VECTOR_UNIT_VSX_P.
(vcond<mode><mode>): Likewise.
(vcondu<mode><mode>): Likewise.
(vector_gtu<mode>): Likewise.
(vector_gte<mode>): Likewise.
(xor<mode>3): Don't allow logical operations on TImode in 32-bit
to prevent the compiler from converting DImode operations to
TImode.
(ior<mode>3): Likewise.
(and<mode>3): Likewise.
(one_cmpl<mode>2): Likewise.
(nor<mode>3): Likewise.
(andc<mode>3): Likewise.

* config/rs6000/constraints.md (wt constraint): New constraint
that returns VSX_REGS if TImode is allowed in VSX registers.

* config/rs6000/predicates.md (easy_fp_constant): 0.0f is an easy
constant under VSX.

* config/rs6000/rs6000-modes.def (PTImode): Define, PTImode is
similar to TImode, but it is restricted to being in the GPRs.

* config/rs6000/rs6000.opt (-mvsx-timode): New switch to allow
TImode to occupy a single VSX register.

* config/rs6000/rs6000-cpus.def (ISA_2_6_MASKS_SERVER): Default to
-mvsx-timode for power7/power8.
(power7 cpu): Likewise.
(power8 cpu): Likewise.

* config/rs6000/rs6000.c (rs6000_hard_regno_nregs_internal): Make
sure that TFmode/TDmode take up two registers if they are ever
allowed in the upper VSX registers.
(rs6000_hard_regno_mode_ok): If -mvsx-timode, allow TImode in VSX
registers.
(rs6000_init_hard_regno_mode_ok): Likewise.
(rs6000_debug_reg_global): Add debugging for PTImode and wt
constraint.  Print if LRA is turned on.
(rs6000_option_override_internal): Give an error if -mvsx-timode
and VSX is not enabled.
(invalid_e500_subreg): Handle PTImode, restricting it to GPRs.  If
-mvsx-timode, restrict TImode to reg+reg addressing, and PTImode
to reg+offset addressing.  Use PTImode when checking offset
addresses for validity.
(reg_offset_addressing_ok_p): Likewise.
(rs6000_legitimate_offset_address_p): Likewise.
(rs6000_legitimize_address): Likewise.
(rs6000_legitimize_reload_address): Likewise.
(rs6000_legitimate_address_p): Likewise.
(rs6000_eliminate_indexed_memrefs): Likewise.
(rs6000_emit_move): Likewise.
(rs6000_secondary_reload): Likewise.
(rs6000_secondary_reload_inner): Handle PTImode.  Allow 64-bit
reloads to fpr registers to continue to use reg+offset addressing,
but 64-bit reloads to altivec registers need reg+reg addressing.
Drop test for PRE_MODIFY, since VSX loads/stores no longer support
it.  Treat LO_SUM like a PLUS operation.
(rs6000_secondary_reload_class): If type is 64-bit, prefer to use
FLOAT_REGS instead of VSX_RGS to allow use of reg+offset
addressing.
(rs6000_cannot_change_mode_class): Do not allow TImode in VSX
registers to share a register with a smaller sized type, since VSX
puts scalars in the upper 64-bits.
(print_operand): Add support for PTImode.
(rs6000_register_move_cost): Use VECTOR_MEM_VSX_P instead of
VECTOR_UNIT_VSX_P to catch types that can be loaded in VSX
registers, but don't have arithmetic support.
(rs6000_memory_move_cost): Add test for VSX.
(rs6000_opt_masks): Add -mvsx-timode.

* config/rs6000/vsx.md (VSm): Change to use 64-bit aligned moves
for TImode.
(VSs): Likewise.
(VSr): Use wt constraint for TImode.
(VSv): Drop TImode support.
(vsx_movti): Delete, replace with versions for 32-bit and 64-bit.
(vsx_movti_64bit): Likewise.
(vsx_movti_32bit): Likewise.
(vec_store_<mode>): Use VSX iterator instead of vector iterator.
(vsx_and<mode>3): Delete use of '?' constraint on inputs, just put
one '?' on the appropriate output constraint.  Do not allow TImode
logical operations on 32-bit systems.
(vsx_ior<mode>3): Likewise.
(vsx_xor<mode>3): Likewise.
(vsx_one_cmpl<mode>2): Likewise.
(vsx_nor<mode>3): Likewise.
(vsx_andc<mode>3): Likewise.
(vsx_concat_<mode>): Likewise.
(vsx_xxpermdi_<mode>): Fix thinko for non V2DF/V2DI modes.

* config/rs6000/rs6000.h (MASK_VSX_TIMODE): Map from
OPTION_MASK_VSX_TIMODE.
(enum rs6000_reg_class_enum): Add RS6000_CONSTRAINT_wt.
(STACK_SAVEAREA_MODE): Use PTImode instead of TImode.

* config/rs6000/rs6000.md (INT mode attribute): Add PTImode.
(TI2 iterator): New iterator for TImode, PTImode.
(wd mode attribute): Add values for vector types.
(movti_string): Replace TI move operations with operations for
TImode and PTImode.  Add support for TImode being allowed in VSX
registers.
(mov<mode>_string, TImode/PTImode): Likewise.
(movti_ppc64): Likewise.
(mov<mode>_ppc64, TImode/PTImode): Likewise.
(TI mode splitters): Likewise.

* doc/md.texi (PowerPC and IBM RS6000 constraints): Document wt
constraint.

[gcc/testsuite]
2013-03-20  Michael Meissner  <meissner@linux.vnet.ibm.com>

* gcc.target/powerpc/mmfpgpr.c: New test.
* gcc.target/powerpc/sd-vsx.c: Likewise.
* gcc.target/powerpc/sd-pwr6.c: Likewise.
* gcc.target/powerpc/vsx-float0.c: Likewise.

From-SVN: r196831

re PR tree-optimization/56355 (abs and multiplication)

2013-03-20  Marc Glisse  <marc.glisse@inria.fr>

PR tree-optimization/56355
gcc/
* fold-const.c (tree_binary_nonnegative_warnv_p) <MULT_EXPR>:
Also handle integers with undefined overflow.

gcc/testsuite/
* gcc.dg/pr56355-1.c: New file.

From-SVN: r196829

extend.texi: (micromips, nomicromips, nocompression): Document new function attributes.

gcc/
2013-03-20  Catherine Moore  <clm@codesourcery.com>
    Maciej W. Rozycki  <macro@codesourcery.com>
    Tom de Vries  <tom@codesourcery.com>
    Nathan Sidwell <nathan@codesourcery.com>
    Iain Sandoe  <iain@codesourcery.com>
    Nathan Froyd  <froydnj@codesourcery.com>
    Chao-ying Fu <fu@mips.com>

* doc/extend.texi: (micromips, nomicromips, nocompression):
Document new function attributes.
* doc/invoke.texi (minterlink-compressed, mmicromips,
m14k, m14ke, m14kec): Document new options.
(minterlink-mips16): Update documentation.
* doc/md.texi (ZC, ZD): Document new constraints.
* configure.ac (gcc_cv_as_micromips): Check if linker
supports the .set micromips directive.
* configure: Regenerate.
* config.in: Regenerate.
* config/mips/mips-tables.opt: Regenerate.
* config/mips/micromips.md: New file.
* constraints.md (ZC, ZD): New constraints.
* config/mips/predicates.md (movep_src_register): New predicate.
(movep_src_operand): New predicate.
(non_volatile_mem_operand): New predicate.
* config/mips/mips.md (multimem): New type.
(length): Differentiate between 17-bit and 18-bit branch offsets.
(MOVEP1, MOVEP2): New mode iterator.
  (mov_<load>l): Use ZC constraint.
(mov_<load>r): Likewise.
(mov_<store>l): Likewise.
(mov_<store>r): Likewise.
(*branch_equality<mode>_inverted): Add microMIPS support.
(*branch_equality<mode>): Likewise.
(*jump_absolute): Likewise.
(indirect_jump_<mode>): Likewise.
(tablejump_<mode>): Likewise.
(<optab>_internal): Likewise.
(sibcall_internal): Likewise.
(sibcall_value_internal): Likewise.
(prefetch): Use constraint ZD.
* config/mips/mips.opt (minterlink-compressed): New option.
(minterlink-mips16): Now an alias for minterlink-compressed.
(mmicromips): New option.
* config/mips/sync.md (sync_compare_and_swap<mode>): Use ZR constraint.
(compare_and_swap_12): Likewise.
(sync_add<mode>): Likewise.
(sync_<optab>_12): Likewise.
(sync_old_<optab>_12): Likewise.
(sync_new_<optab>_12): Likewise.
(sync_nand_12): Likewise.
(sync_old_nand_12): Likewise.
(sync_new_nand_12): Likewise.
(sync_sub<mode>): Likewise.
(sync_old_add<mode>): Likewise.
(sync_old_sub<mode>): Likewise.
(sync_new_add<mode>): Likewise.
(sync_new_sub<mode>): Likewise.
(sync_<optab><mode>): Likewise.
(sync_old_<optab><mode>): Likewise.
(sync_new_<optab><mode>): Likewise.
(sync_nand<mode>): Likewise.
(sync_old_nand<mode>): Likewise.
(sync_new_nand<mode>): Likewise.
(sync_lock_test_and_set<mode>): Likewise.
(test_and_set_12): Likewise.
(atomic_compare_and_swap<mode>): Likewise.
(atomic_exchange<mode>_llsc): Likewise.
(atomic_fetch_add<mode>_llsc): Likewise.
* config/mips/mips-cpus.def (m14kc, m14k): New processors.
* config/mips/mips-protos.h (umips_output_save_restore): New prototype.
(umips_save_restore_pattern_p): Likewise.
(umips_load_store_pair_p): Likewise.
(umips_output_load_store_pair): Likewise.
(umips_movep_target_p): Likewise.
(umips_12bit_offset_address_p): Likewise.
* config/mips/mips.c (MIPS_MAX_FIRST_STEP): Update for microMIPS.
(mips_base_mips16): Rename this...
(mips_base_compression_flags): ...to this. Update all uses.
(mips_attribute_table): Add micromips, nomicromips and nocompression.
(mips_mips16_decl_p): Delete.
(mips_nomips16_decl_p): Delete.
  (mips_get_compress_on_flags): New function.
(mips_get_compress_off_flags): New function.
(mips_get_compress_mode): New function.
(mips_get_compress_on_name): New function.
(mips_get_compress_off_name): New function.
(mips_insert_attributes): Support multiple compression types.
(mips_merge_decl_attributes): Likewise.
(umips_12bit_offset_address_p): New function.
(mips_start_function_definition): Emit .set micromips directive.
(mips_call_may_need_jalx_p): New function.
(mips_function_ok_for_sibcall): Add microMIPS support.
(mips_print_operand_punctuation): Support short delay slots and
compact jumps.
(umips_swm_mask, umips_swm_encoding): New.
(umips_build_save_restore): New function.
(mips_for_each_saved_gpr_and_fpr): Add microMIPS support.
(was_mips16_p): Remove.
(old_compression_mode): New.
(mips_set_compression_mode): New function.
(mips_set_current_function): Add microMIPS support.
(mips_option_override): Likewise.
(umips_save_restore_pattern_p): New function.
(umips_output_save_restore): New function.
(umips_load_store_pair_p_1): New function.
(umips_load_store_pair_p): New function.
(umips_output_load_store_pair_1): New function.
(umips_output_load_store_pair): New function.
(umips_movep_target_p) New function.
(mips_prepare_pch_save): Add microMIPS support.
* config/mips/mips.h (TARGET_COMPRESSION): New.
(TARGET_CPU_CPP_BUILTINS): Update macro
to use new compression flags and to support microMIPS.
(MIPS_ISA_LEVEL_SPEC): Add m14k processors.
(MIPS_ARCH_FLOAT_SPEC): Likewise.
(ISA_HAS_LWXS): Include TARGET_MICROMIPS.
(ISA_HAS_LOAD_DELAY): Exclude TARGET_MICROMIPS.
(ASM_SPEC): Support mmicromips and mno-micromips.
(M16STORE_REG_P): New macro.
(MIPS_CALL): Support TARGET_MICROMIPS.
(MICROMIPS_J): New macro.
(mips_base_mips16): Rename this...
(mips_base_compression_flags): ...to this.
(UMIPS_12BIT_OFFSET_P): New macro.
* config/mips/t-sde: (MULTILIB_OPTIONS): Add microMIPS.
(MULTILIB_DIRNAMES): Likewise.
libgcc/
2013-03-20  Catherine Moore  <clm@codesourcery.com>
    Joseph Myers  <joseph@codesourcery.com>
    Chao-ying Fu  <fu@mips.com>

* config/mips/mips16.S:  Don't build for microMIPS.
* config/mips/linux-unwind.h: Handle microMIPS frame.
* config/mips/crtn.S (fini, init): New labels.
gcc/testsuite/
2013-03-20  Catherine Moore  <clm@codesourcery.com>
    Richard Sandiford <rdsandiford@googlemail.com>

* gcc.target/mips/mips.exp: Add microMIPS support.
* gcc.target/mips/umips-movep-2.c: New test.
* gcc.target/mips/umips-lwp-2.c: New test.
* gcc.target/mips/umips-swp-5.c: New test.
* gcc.target/mips/umips-constraints-1.c: New test.
* gcc.target/mips/umips-lwp-3.c: New test.
* gcc.target/mips/umips-swp-6.c: New test.
* gcc.target/mips/umips-constraints-2.c: New test.
* gcc.target/mips/umips-save-restore-1.c: New test.
* gcc.target/mips/umips-lwp-4.c: New test.
* gcc.target/mips/umips-swp-7.c: New test.
* gcc.target/mips/umips-save-restore-2.c: New test.
* gcc.target/mips/umips-lwp-swp-volatile.c: New test.
* gcc.target/mips/umips-lwp-5.c: New test.
* gcc.target/mips/umips-save-restore-3.c: New test.
* gcc.target/mips/umips-lwp-6.c: New test.
* gcc.target/mips/umips-swp-1.c: New test.
* gcc.target/mips/umips-lwp-7.c: New test.
* gcc.target/mips/umips-swp-2.c: New test.
* gcc.target/mips/umips-lwp-8.c: New test.
* gcc.target/mips/umips-swp-3.c: New test.
* gcc.target/mips/umips-movep-1.c: New test.
* gcc.target/mips/umips-lwp-1.c: New test.
* gcc.target/mips/umips-swp-4.c: New test.

Co-Authored-By: Chao-ying Fu <fu@mips.com>
Co-Authored-By: Iain Sandoe <iain@codesourcery.com>
Co-Authored-By: Joseph Myers <joseph@codesourcery.com>
Co-Authored-By: Maciej W. Rozycki <macro@codesourcery.com>
Co-Authored-By: Nathan Froyd <froydnj@codesourcery.com>
Co-Authored-By: Nathan Sidwell <nathan@codesourcery.com>
Co-Authored-By: Richard Sandiford <rdsandiford@googlemail.com>
Co-Authored-By: Tom de Vries <tom@codesourcery.com>
From-SVN: r196828

re PR tree-optimization/56661 (Incorrect code with -O1 -ftree-pre)

2013-03-20  Richard Biener  <rguenther@suse.de>

PR tree-optimization/56661
* tree-ssa-sccvn.c (visit_use): Only value-number calls if
the result does not have to be distinct.

* gcc.dg/torture/pr56661.c: New testcase.

From-SVN: r196825

tree-inline.c (copy_tree_body_r): Sync MEM_REF code with remap_gimple_op_r.

2013-03-20  Richard Biener  <rguenther@suse.de>

* tree-inline.c (copy_tree_body_r): Sync MEM_REF code with
remap_gimple_op_r.

From-SVN: r196824

re PR rtl-optimization/56605 (Redundant branch introduced during loop2 phases)

gcc:

2013-03-13  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>
    Steven Bosscher <steven@gcc.gnu.org>

PR rtl-optimization/56605
* loop-iv.c (implies_p): Handle equal RTXs and subregs.

gcc/testsuite:

2013-03-13  Bill Schmidt  wschmidt@linux.vnet.ibm.com>

PR rtl-optimization/56605
* gcc.target/powerpc/pr56605.c: New.

Co-Authored-By: Steven Bosscher <steven@gcc.gnu.org>
From-SVN: r196823

Don't XFAIL gfortran.dg/do_1.f90 (PR fortran/54932)

PR fortran/54932
* gfortran.dg/do_1.f90: Don't xfail.

From-SVN: r196821

i-fortra.ads: Update comment...

2013-03-20  Tobias Burnus  <burnus@net-b.de>

        * i-fortra.ads: Update comment, add Ada 2012's optional
        Star and Kind data types for enhanced interoperability.

From-SVN: r196814

re PR bootstrap/56656 (Suffix or operands invalid for 'movq')

PR bootstrap/56656
* config/i386/i386.md (*movdi_internal): Handle broken assemblers
that require movd instead of movq.

From-SVN: r196813

tree-ssa-structalias.c (struct variable_info): Add pointer to the first field of an aggregate with sub-vars.

2013-03-20  Richard Biener  <rguenther@suse.de>

* tree-ssa-structalias.c (struct variable_info): Add pointer
to the first field of an aggregate with sub-vars.  Make
this and the pointer to the next subfield its ID.
(vi_next): New function.
(nothing_id, anything_id, readonly_id, escaped_id, nonlocal_id,
storedanything_id, integer_id): Increment by one.
(new_var_info, get_call_vi, lookup_call_clobber_vi,
get_call_clobber_vi): Adjust.
(solution_set_expand): Simplify and speedup.
(solution_set_add): Inline into ...
(set_union_with_increment): ... this.  Adjust accordingly.
(do_sd_constraint): Likewise.
(do_ds_constraint): Likewise.
(do_complex_constraint): Simplify.
(build_pred_graph): Adjust.
(solve_graph): Likewise.  Simplify and speedup.
(get_constraint_for_ssa_var, get_constraint_for_ptr_offset,
get_constraint_for_component_ref, get_constraint_for_1,
first_vi_for_offset, first_or_preceding_vi_for_offset,
create_function_info_for, create_variable_info_for_1,
create_variable_info_for, intra_create_variable_infos): Adjust.
(init_base_vars): Push NULL for ID zero.
(compute_points_to_sets): Adjust.

From-SVN: r196812

cfgloop.c (verify_loop_structure): Streamline and avoid ICEing on corrupt loop tree.

2013-03-20  Richard Biener  <rguenther@suse.de>

* cfgloop.c (verify_loop_structure): Streamline and avoid
ICEing on corrupt loop tree.
* graph.c (draw_cfg_nodes_for_loop): Avoid ICEing on corrupt
loop tree.

From-SVN: r196811

tree-vect-loop-manip.c (slpeel_can_duplicate_loop_p): Do not check whether an SSA update is needed.

2013-03-20  Richard Biener  <rguenther@suse.de>

* tree-vect-loop-manip.c (slpeel_can_duplicate_loop_p): Do not
check whether an SSA update is needed.

From-SVN: r196810

constraints.md (T): Rename to...

gcc/
* config/mips/constraints.md (T): Rename to...
(Yf): ...this.
(U): Rename to...
(Yd): ...this.
* config/mips/mips.md (*movdi_64bit, *movdi_64bit_mips16)
(*mov<mode>_internal, *mov<mode>_mips16): Update accordingly.

From-SVN: r196807

re PR fortran/51825 (Fortran runtime error: Cannot match namelist object name)

2013-03-20  Tilo Schwarz  <tilo@tilo-schwarz.de>

        PR libfortran/51825
        * io/list_read.c (nml_read_obj): Don't end the component loop on
        a nested derived type, but continue with the next loop iteration.
        (nml_get_obj_data): Don't move the first_nl pointer further in
        the list if a qualifier was found.

2013-03-20  Tilo Schwarz  <tilo@tilo-schwarz.de>

        PR libfortran/51825
        * gcc/testsuite/gfortran.dg/namelist_77.f90: New.
        * gcc/testsuite/gfortran.dg/namelist_78.f90: New.

From-SVN: r196806

re PR libfortran/48618 (Negative unit number in OPEN(...) is sometimes allowed)

2013-03-20  Tilo Schwarz  <tilo@tilo-schwarz.de>

        PR libfortran/48618
        * io/open.c (st_open): Raise error for unit number < 0 only if
        unit number does not exist already.

2013-03-20  Tilo Schwarz  <tilo@tilo-schwarz.de>

        PR libfortran/48618
        * gfortran.dg/open_negative_unit_1.f90: New.

From-SVN: r196805

Daily bump.

From-SVN: r196804

Yet another ChangeLog fix.

From-SVN: r196800

Another ChangeLog entry fix.

From-SVN: r196799

AArch64 backend support for SBC instruction.

From-SVN: r196797

AArch64 backend support for ROR instruction.

From-SVN: r196796

AArch64 backend support for EXTR instruction.

From-SVN: r196795

re PR tree-optimization/56273 (Bogus -Warray-bounds warning)

2013-03-19  Richard Biener  <rguenther@suse.de>

PR tree-optimization/56273
* passes.c (init_optimization_passes): Move second VRP after DOM.

* gcc.dg/tree-ssa/vrp47.c: Adjust.
* c-c++-common/uninit-17.c: Likewise.

From-SVN: r196792

Use C99 bool instead of enum try.

2013-03-19  Janne Blomqvist  <jb@gcc.gnu.org>

* libgfortran.h: Include stdbool.h.
(enum try): Remove.
(notify_std): Change return type to bool.
* intrinsics/chmod.c: Don't include stdbool.h.
* intrinsics/execute_command_line.c: Likewise.
* io/format.c: Likewise.
* io/list_read.c (nml_parse_qualifier): Change return type to bool.
(nml_read_obj): Likewise.
(nml_get_obj_data): Likewise.
* io/transfer.c (read_block_form): Fix comment.
(write_buf): Change return type to bool.
* io/write.c: Don't include stdbool.h.
* io/write_float.def (output_float): Change return type to bool.
(output_float_FMT_G_ ## x): Change type of result variable.
* runtime/error.c (notify_std): Change return type to bool.

From-SVN: r196791

Remove gcc/testsuite/ and testsuite/ leading paths from
filenames.

From-SVN: r196790

Fix up ChangeLog entry formatting.

From-SVN: r196789

Daily bump.

From-SVN: r196788

i386.md (*movti_internal): Merge from *movti_internal_rex64 and *movti_internal_sse.

* config/i386/i386.md (*movti_internal): Merge from
*movti_internal_rex64 and *movti_internal_sse.  Use x64 isa attribute.
(*movdi_internal): Merge with *movdi_internal_rex64.  Use x64 and
nox64 isa attributes.

From-SVN: r196784

tree-ssa-structalias.c (find): Use gcc_checking_assert.

2013-03-18  Richard Biener  <rguenther@suse.de>

* tree-ssa-structalias.c (find): Use gcc_checking_assert.
(unite): Likewise.
(merge_node_constraints): Likewise.
(build_succ_graph): Likewise.
(valid_graph_edge): Inline into single caller.
(unify_nodes): Likewise.  Use bitmap_set_bit return value
and cache varinfo.
(scc_visit): Fix formatting and variable use.
(do_sd_constraint): Use gcc_checking_assert.
(do_ds_constraint): Likewise.
(do_complex_constraint): Likewise.
(condense_visit): Likewise.  Cleanup.
(dump_pred_graph): New function.
(perform_var_substitution): Dump the pred-graph before
variable substitution.
(find_equivalent_node): Use gcc_checking_assert.
(rewrite_constraints): Guard checking loop with ENABLE_CHECKING.

From-SVN: r196783

tree-vect-loop-manip.c (vect_create_cond_for_alias_checks): Remove cond_expr_stmt_list argument and do not gimplify the built expression.

2013-03-18  Richard Biener  <rguenther@suse.de>

* tree-vect-loop-manip.c (vect_create_cond_for_alias_checks):
Remove cond_expr_stmt_list argument and do not gimplify the
built expression.
(vect_loop_versioning): Adjust.
* tree-vect-data-refs.c (vect_create_addr_base_for_vector_ref):
Cleanup to use less temporaries.
(vect_create_data_ref_ptr): Cleanup.

From-SVN: r196782

re PR tree-optimization/56635 (internal compiler error: in find_lattice_value, at tree-complex.c:15)

PR tree-optimization/56635
* fold-const.c (operand_equal_p): For MEM_REF and TARGET_MEM_REF,
require types_compatible_p types.

* g++.dg/torture/pr56635.C: New test.

From-SVN: r196781

stormy16.c (xstormy16_expand_prologue): Remove spurious backslash.

* config/stormy16/stormy16.c (xstormy16_expand_prologue): Remove
spurious backslash.

From-SVN: r196779

mn10300.c (mn10300_get_live_callee_saved_regs): Add missing line to comment describing function.

* config/mn10300/mn10300.c (mn10300_get_live_callee_saved_regs):
Add missing line to comment describing function.

From-SVN: r196778

re PR tree-optimization/56210 (invalid -Warray-bounds warning)

2013-03-18  Richard Biener  <rguenther@suse.de>

PR tree-optimization/56210
* tree-ssa-structalias.c (find_func_aliases_for_builtin_call):
Handle string / character search functions.
* tree-ssa-alias.c (ref_maybe_used_by_call_p_1): Likewise.

From-SVN: r196777

re PR middle-end/56483 (LTO issue with expanding GIMPLE_COND)

2013-03-18  Richard Biener  <rguenther@suse.de>

PR middle-end/56483
* cfgexpand.c (expand_gimple_cond): Inline gimple_cond_single_var_p
and implement properly.
* gimple.h (gimple_cond_single_var_p): Remove.

From-SVN: r196776

tree-data-ref.h (find_data_references_in_loop): Declare.

2013-03-18  Richard Biener  <rguenther@suse.de>

* tree-data-ref.h (find_data_references_in_loop): Declare.
* tree-data-ref.c (get_references_in_stmt): Use a stack
vector pre-allocated in the callers.
(find_data_references_in_stmt): Adjust.
(graphite_find_data_references_in_stmt): Likewise.
(create_rdg_vertices): Likewise.
(find_data_references_in_loop): Export.
* tree-vect-data-refs.c (vect_analyze_data_ref_dependences):
Compute dependences here...
(vect_analyze_data_refs): ...not here.  When we encounter
a non-vectorizable data reference in basic-block vectorization
truncate the data reference vector.  Do not bother to
fixup data-dependence information for gather loads.
* tree-vect-slp.c (vect_slp_analyze_bb_1): Check the number
of data references, as reported.

From-SVN: r196775

PR libstdc++/55977 (partial, std::vector and std::deque bits)

2013-03-18  Paolo Carlini  <paolo.carlini@oracle.com>

PR libstdc++/55977 (partial, std::vector and std::deque bits)
* include/bits/stl_vector.h (_M_range_initialize(_InputIterator,
_InputIterator, std::input_iterator_tag)): Use emplace_back.
* include/bits/deque.tcc (_M_range_initialize(_InputIterator,
_InputIterator, std::input_iterator_tag)): Likewise.
* testsuite/23_containers/vector/cons/55977.cc: New.
* testsuite/23_containers/deque/cons/55977.cc: Likewise.
* testsuite/23_containers/vector/requirements/dr438/assign_neg.cc:
Adjust dg-error line number.
* testsuite/23_containers/vector/requirements/dr438/insert_neg.cc:
Likewise.

From-SVN: r196774

gfortran.h (gfc_option_t): Remove flag_whole_file.

2013-03-18  Tobias Burnus  <burnus@net-b.de>

        * gfortran.h (gfc_option_t): Remove flag_whole_file.
        * invoke.texi (-fno-whole-file): Remove.
        * lang.opt (fwhole-file): Change to Ignore.
        * options.c (gfc_init_options, gfc_post_options,
        gfc_handle_option): Remove !flag_whole_file handling
        * parse.c (resolve_all_program_units,
        * translate_all_program_units,
        gfc_parse_file): Ditto.
        * resolve.c (resolve_global_procedure): Ditto.
        * trans-decl.c (gfc_get_symbol_decl,
        * gfc_get_extern_function_decl,
        gfc_create_module_variable): Ditto.
        * trans-types.c (gfc_get_derived_type): Ditto.

From-SVN: r196773

re PR tree-optimization/3713 (Pointers to functions or member functions are not folded or inlined)

2013-03-18  Richard Biener  <rguenther@suse.de>

PR tree-optimization/3713
* tree-ssa-sccvn.c (visit_copy): Simplify.  Always propagate
has_constants and expr.
(stmt_has_constants): Properly valueize SSA names when deciding
whether the stmt has constants.

* g++.dg/ipa/devirt-12.C: New testcase.

From-SVN: r196771

tree-ssa-loop-manip.c (find_uses_to_rename): Do not scan the whole function when there is nothing to do.

2013-03-18  Richard Biener  <rguenther@suse.de>

* tree-ssa-loop-manip.c (find_uses_to_rename): Do not scan the
whole function when there is nothing to do.
* tree-ssa-loop.c (pass_vectorize): Remove TODO_update_ssa.
* tree-vectorizer.c (vectorize_loops): Update virtual and
loop-closed SSA once.
* tree-vect-loop.c (vect_transform_loop): Do not update SSA here.

From-SVN: r196770

re PR c/56113 (out of memory when compiling a function with many goto labels (50k > ))

2013-03-18  Richard Biener  <rguenther@suse.de>

PR middle-end/56113
* domwalk.c (bb_postorder): New global static.
(cmp_bb_postorder): New function.
(walk_dominator_tree): Replace scheme imposing an order for
visiting dominator sons by one sorting them at the time they
are pushed on the stack.

From-SVN: r196769

re PR middle-end/39326 (Segmentation fault with -O1, out of memory with -O2)

2013-03-18  Richard Biener  <rguenther@suse.de>

PR tree-optimization/39326
* tree-ssa-loop-im.c (refs_independent_p): Exploit symmetry.
(struct mem_ref): Replace mem member with ao_ref typed member.
(MEM_ANALYZABLE): Adjust.
(memref_eq): Likewise.
(mem_ref_alloc): Likewise.
(gather_mem_refs_stmt): Likewise.
(mem_refs_may_alias_p): Use the ao_ref to query the alias oracle.
(execute_sm_if_changed_flag_set): Adjust.
(execute_sm): Likewise.
(ref_always_accessed_p): Likewise.
(refs_independent_p): Likewise.
(can_sm_ref_p): Likewise.

From-SVN: r196768

re PR c/56566 (bogus "is narrower than values of its type" warning)

PR c/56566
* tree.c (tree_int_cst_min_precision): For integer_zerop (value)
return 1 even for !unsignedp.

* c-c++-common/pr56566.c: New test.

From-SVN: r196767

re PR c++/54359 ([C++0x] decltype in member function's trailing return type when defined outside of class)

PR c++/54359
PR c++/56639
* parser.c (cp_parser_direct_declarator): Bail if we see a
qualified-id not at namespace scope.

From-SVN: r196765

* g++.dg/template/abstract-dr337.C: XFAIL.

From-SVN: r196764

Daily bump.

From-SVN: r196762

re PR c++/17232 ([DR 1640] classes and class template specializations treated differently w.r.t. core issue #337)

PR c++/17232
PR c++/56642
* typeck2.c (abstract_virtuals_error_sfinae): Revert complete_type
change for now.

From-SVN: r196758

i386.md (isa): Add x64 and nox64.

* config/i386/i386.md (isa): Add x64 and nox64.
(enabled): Define x64 for TARGET_64BIT and nox64 for !TARGET_64BIT.
(*pushtf): Enable *roF alternative for x64 isa only.
(*pushxf): Merge with *pushxf_nointeger.  Use Yx*r constraint. Set
mode attribute of integer alternatives to DImode for TARGET_64BIT.
(*pushdf): Merge with *pushdf_rex64.  Use x64 and nox64 isa attributes.
(*movtf_internal): Merge from *movtf_internal_rex64 and
*movtf_internal_sse.  Use x64 and nox64 isa attributes.
(*movxf_internal): Merge with *movxf_internal_rex64.  Use x64 and
nox64 isa attributes.
(*movdf_internal): Merge with *movdf_internal_rex64.  Use x64 and
nox64 isa attributes.
* config/i386/constraints.md (Yd): Do not set for TARGET_64BIT.

From-SVN: r196757

alpha.c (TARGET_LRA_P): New define.

* config/alpha/alpha.c (TARGET_LRA_P): New define.

From-SVN: r196756

re PR libstdc++/55979 ([C++11] std::list range construction imposes unnecessary conversion constraints)

2013-03-17  Paolo Carlini  <paolo.carlini@oracle.com>

PR libstdc++/55979
* include/bits/stl_list.h (_M_initialize_dispatch(_InputIterator,
_InputIterator, __false_type)): Use emplace_back.
* testsuite/23_containers/list/cons/55979.cc: New.
* testsuite/23_containers/list/modifiers/1.h: Adjust.
* testsuite/23_containers/list/requirements/dr438/assign_neg.cc:
Adjust dg-error line number.

From-SVN: r196755

re PR target/56640 (bootstrap failure on arm-linux-gnueabi{,hf})

PR target/56640
* config/arm/arm.h (REG_CLASS_NAMES): Add "SFP_REG" and "AFP_REG"
class names.  Remove trailing comma after "ALL_REGS".

From-SVN: r196753

* sv.po: Update.

From-SVN: r196751

cgraph.h (cgraph_get_create_real_symbol_node): Declare.

* cgraph.h (cgraph_get_create_real_symbol_node): Declare.
* cgraph.c (cgraph_get_create_real_symbol_node): New function.
* cgrpahbuild.c: Use cgraph_get_create_real_symbol_node instead
of cgraph_get_create_node.
* ipa-prop.c (ipa_make_edge_direct_to_target): Likewise.

From-SVN: r196750

decl.c (grokdeclarator): Assert that we won't see a pointer to METHOD_TYPE.

* decl.c (grokdeclarator): Assert that we won't see a pointer to
METHOD_TYPE.

From-SVN: r196748

re PR c++/54277 (Template class member referred to with implicit this inside lambda is incorrectly const-qualified)

PR c++/54277
* cp-tree.h (WILDCARD_TYPE_P): Split out from...
(MAYBE_CLASS_TYPE_P): ...here.
* semantics.c (lambda_capture_field_type): Only build a
magic decltype for wildcard types.
(lambda_proxy_type): Likewise.
(finish_non_static_data_member): Get the quals from
the object.

From-SVN: r196747

re PR c++/55931 ([C++11] Constexpr member function inside a static member is not working)

PR c++/55931
* parser.c (cp_parser_template_argument): Don't
fold_non_dependent_expr.

From-SVN: r196746

parser.c (cp_parser_lambda_declarator_opt): Use cp_parser_trailing_type_id.

* parser.c (cp_parser_lambda_declarator_opt): Use
cp_parser_trailing_type_id.

From-SVN: r196745

re PR c++/45917 (inaccessible types allowed as template argument in nested-name-specifier)

PR c++/45917
* parser.c (cp_parser_template_id): Don't forget access checks.

From-SVN: r196744

re PR c++/52374 ([C++11] Fails to transform id-expression into dependent base member access in lambda expression)

PR c++/52374
* pt.c (tsubst_qualified_id): Use current_nonlambda_class_type.

From-SVN: r196743

re PR c++/54764 (In class initialization of non-static lambda member can't be used in class with default template paramer)

PR c++/54764
PR c++/55972
* name-lookup.h (tag_scope): Add ts_lambda.
* semantics.c (begin_lambda_type): Use it.
* decl.c (xref_tag_1): Set CLASSTYPE_LAMBDA_EXPR.
* pt.c (check_default_tmpl_args): Ignore lambdas.
(push_template_decl_real): Handle lambdas.
* tree.c (no_linkage_check): Adjust lambda check.

From-SVN: r196742

re PR c++/56039 (ICE in iterative_hash_template_arg, at cp/pt.c:1606)

PR c++/56039
* tree.c (strip_typedefs_expr): Complain about lambda, don't abort.

From-SVN: r196741

re PR c++/54359 ([C++0x] decltype in member function's trailing return type when defined outside of class)

PR c++/54359
* parser.c (cp_parser_direct_declarator): Fix late return
for out-of-class defn of member function.

From-SVN: r196740

re PR c++/55357 (-Wshadow warns about lambda function parameters matching variables in outer scope)

PR c++/55357
* semantics.c (maybe_add_lambda_conv_op): Clear DECL_NAME of copied
parms to avoid duplicate -Wshadow warnings.

From-SVN: r196739

* search.c (lookup_base): Handle NULL_TREE.

From-SVN: r196738

re PR c++/56481 (endless loop compiling a C++ file)

PR c++/56481
* semantics.c (potential_constant_expression_1): Use of 'this' in
a non-constexpr function makes the expression not potentially
constant.

From-SVN: r196737

re PR c++/52748 ([C++11] N3276 changes to decltype)

N3276
PR c++/52748
* cp-tree.h (tsubst_flags): Add tf_decltype.
* call.c (build_cxx_call): Don't build a temporary if it's set.
(build_over_call): Make sure it's only passed to build_cxx_call.
* parser.c (cp_parser_primary_expression): Add decltype_p parm.
(cp_parser_unary_expression): Likewise.
(cp_parser_cast_expression): Likewise.
(cp_parser_binary_expression): Likewise.
(cp_parser_assignment_expression): Likewise.
(cp_parser_postfix_expression): Likewise.  Pass tf_decltype.
(cp_parser_explicit_instantiation): Add decltype_p.  Force a
temporary for a call on the LHS of a comma.
(cp_parser_decltype): Pass true to decltype_p parms.
* pt.c (tsubst) [DECLTYPE_TYPE]: Pass tf_decltype.
(tsubst_copy_and_build): Pass tf_decltype down only for
CALL_EXPR and the RHS of COMPOUND_EXPR.
* tree.c (build_cplus_new): Call complete_type_or_maybe_complain.

From-SVN: r196736

cp-tree.h (abstract_class_use): New enum.

* cp-tree.h (abstract_class_use): New enum.
* typeck2.c (pending_abstract_type): Add use field.
(abstract_virtuals_error_sfinae): Add overloads taking
abstract_class_use instead of tree.
* typeck.c (build_static_cast_1): Call it.
* except.c (is_admissible_throw_operand_or_catch_parameter): Call it.
* pt.c: Adjust calls.
* decl.c (cp_finish_decl): Don't handle functions specially.
(grokdeclarator): Always check return type.
* init.c (build_new_1): Adjust call.

From-SVN: r196735

DR 337 PR c++/17232

DR 337
PR c++/17232
* pt.c (tsubst) [ARRAY_TYPE]: Use abstract_virtuals_error_sfinae.
* typeck2.c (abstract_virtuals_error_sfinae): Call complete_type.

From-SVN: r196734

DR 657

DR 657
* pt.c (tsubst_function_type): Call abstract_virtuals_error_sfinae.
(tsubst_arg_types): Likewise.

From-SVN: r196733

DR 1518 PR c++/54835

DR 1518
PR c++/54835
* call.c (convert_like_real): Check for explicit constructors
even for value-initialization.

From-SVN: r196732

re PR c++/54946 (ICE on template parameter from cast char-pointer in C++11 constexpr struct)

PR c++/54946
* pt.c (convert_nontype_argument): Handle invalid pointer.

From-SVN: r196731

* parser.c (cp_parser_lambda_expression): Use nreverse.

From-SVN: r196730