KVM: arm64: Fix AArch32 handling of DBGD{CCINT,SCRext} and DBGVCR

The DBGD{CCINT,SCRext} and DBGVCR register entries in the cp14 array
are missing their target register, resulting in all accesses being
targetted at the guard sysreg (indexed by __INVALID_SYSREG__).

Point the emulation code at the actual register entries.

Fixes: bdfb4b389c8d ("arm64: KVM: add trap handlers for AArch32 debug registers")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201029172409.2768336-1-maz@kernel.org

KVM: arm64: Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT

For consistency with the rest of the stage-2 page-table page allocations
(performing using a kvm_mmu_memory_cache), ensure that __GFP_ACCOUNT is
included in the GFP flags for the PGD pages.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201026144423.24683-1-will@kernel.org

KVM: arm64: Drop useless PAN setting on host EL1 to EL2 transition

Setting PSTATE.PAN when entering EL2 on nVHE doesn't make much
sense as this bit only means something for translation regimes
that include EL0. This obviously isn't the case in the nVHE case,
so let's drop this setting.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Link: https://lore.kernel.org/r/20201026095116.72051-4-maz@kernel.org

KVM: arm64: Remove leftover kern_hyp_va() in nVHE TLB invalidation

The new calling convention says that pointers coming from the SMCCC
interface are turned into their HYP version in the host HVC handler.
However, there is still a stray kern_hyp_va() in the TLB invalidation
code, which could result in a corrupted pointer.

Drop the spurious conversion.

Fixes: a071261d9318 ("KVM: arm64: nVHE: Fix pointers during SMCCC convertion")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201026095116.72051-3-maz@kernel.org

KVM: arm64: Don't corrupt tpidr_el2 on failed HVC call

The hyp-init code starts by stashing a register in TPIDR_EL2
in in order to free a register. This happens no matter if the
HVC call is legal or not.

Although nothing wrong seems to come out of it, it feels odd
to alter the EL2 state for something that eventually returns
an error.

Instead, use the fact that we know exactly which bits of the
__kvm_hyp_init call are non-zero to perform the check with
a series of EOR/ROR instructions, combined with a build-time
check that the value is the one we expect.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201026095116.72051-2-maz@kernel.org

Merge branches 'kvm-arm64/pt-new' and 'kvm-arm64/pmu-5.9' into kvmarm-master/next

Signed-off-by: Marc Zyngier <maz@kernel.org>

KVM: arm64: Ensure user_mem_abort() return value is initialised

If a change in the MMU notifier sequence number forces user_mem_abort()
to return early when attempting to handle a stage-2 fault, we return
uninitialised stack to kvm_handle_guest_abort(), which could potentially
result in the injection of an external abort into the guest or a spurious
return to userspace. Neither or these are what we want to do.

Initialise 'ret' to 0 in user_mem_abort() so that bailing due to a
change in the MMU notrifier sequence number is treated as though the
fault was handled.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20200930102442.16142-1-will@kernel.org

KVM: arm64: Pass level hint to TLBI during stage-2 permission fault

Alex pointed out that we don't pass a level hint to the TLBI instruction
when handling a stage-2 permission fault, even though the walker does
at some point have the level information in its hands.

Rework stage2_update_leaf_attrs() so that it can optionally return the
level of the updated pte to its caller, which can in turn be used to
provide the correct TLBI level hint.

Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/595cc73e-636e-8b3a-f93a-b4e9fb218db8@arm.com
Link: https://lore.kernel.org/r/20200930131801.16889-1-will@kernel.org

KVM: arm64: Fix some documentation build warnings

As warned with make htmldocs:

.../Documentation/virt/kvm/devices/vcpu.rst:70: WARNING: Malformed table.
Text in column margin in table line 2.

=======  ======================================================
-ENODEV: PMUv3 not supported or GIC not initialized
-ENXIO:  PMUv3 not properly configured or in-kernel irqchip not
         configured as required prior to calling this attribute
-EBUSY:  PMUv3 already initialized
-EINVAL: Invalid filter range
=======  ======================================================

The ':' character for two lines are above the size of the column.
Besides that, other tables at the file doesn't use ':', so
just drop them.

While here, also fix this warning also introduced at the same patch:

.../Documentation/virt/kvm/devices/vcpu.rst:88: WARNING: Block quote ends without a blank line; unexpected unindent.

By marking the C code as a literal block.

Fixes: 8be86a5eec04 ("KVM: arm64: Document PMU filtering API")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/b5385dd0213f1f070667925bf7a807bf5270ba78.1601616399.git.mchehab+huawei@kernel.org

Merge branch 'kvm-arm64/hyp-pcpu' into kvmarm-master/next

Signed-off-by: Marc Zyngier <maz@kernel.org>

Merge remote-tracking branch 'arm64/for-next/ghostbusters' into kvm-arm64/hyp-pcpu

Signed-off-by: Marc Zyngier <maz@kernel.org>

kvm: arm64: Remove unnecessary hyp mappings

With all nVHE per-CPU variables being part of the hyp per-CPU region,
mapping them individual is not necessary any longer. They are mapped to hyp
as part of the overall per-CPU region.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-11-dbrazdil@google.com

kvm: arm64: Set up hyp percpu data for nVHE

Add hyp percpu section to linker script and rename the corresponding ELF
sections of hyp/nvhe object files. This moves all nVHE-specific percpu
variables to the new hyp percpu section.

Allocate sufficient amount of memory for all percpu hyp regions at global KVM
init time and create corresponding hyp mappings.

The base addresses of hyp percpu regions are kept in a dynamically allocated
array in the kernel.

Add NULL checks in PMU event-reset code as it may run before KVM memory is
initialized.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-10-dbrazdil@google.com

kvm: arm64: Create separate instances of kvm_host_data for VHE/nVHE

Host CPU context is stored in a global per-cpu variable `kvm_host_data`.
In preparation for introducing independent per-CPU region for nVHE hyp,
create two separate instances of `kvm_host_data`, one for VHE and one
for nVHE.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-9-dbrazdil@google.com

kvm: arm64: Duplicate arm64_ssbd_callback_required for nVHE hyp

Hyp keeps track of which cores require SSBD callback by accessing a
kernel-proper global variable. Create an nVHE symbol of the same name
and copy the value from kernel proper to nVHE as KVM is being enabled
on a core.

Done in preparation for separating percpu memory owned by kernel
proper and nVHE.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-8-dbrazdil@google.com

kvm: arm64: Add helpers for accessing nVHE hyp per-cpu vars

Defining a per-CPU variable in hyp/nvhe will result in its name being
prefixed with __kvm_nvhe_. Add helpers for declaring these variables
in kernel proper and accessing them with this_cpu_ptr and per_cpu_ptr.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-7-dbrazdil@google.com

kvm: arm64: Remove hyp_adr/ldr_this_cpu

The hyp_adr/ldr_this_cpu helpers were introduced for use in hyp code
because they always needed to use TPIDR_EL2 for base, while
adr/ldr_this_cpu from kernel proper would select between TPIDR_EL2 and
_EL1 based on VHE/nVHE.

Simplify this now that the hyp mode case can be handled using the
__KVM_VHE/NVHE_HYPERVISOR__ macros.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-6-dbrazdil@google.com

kvm: arm64: Remove __hyp_this_cpu_read

this_cpu_ptr is meant for use in kernel proper because it selects between
TPIDR_EL1/2 based on nVHE/VHE. __hyp_this_cpu_ptr was used in hyp to always
select TPIDR_EL2. Unify all users behind this_cpu_ptr and friends by
selecting _EL2 register under __KVM_NVHE_HYPERVISOR__. VHE continues
selecting the register using alternatives.

Under CONFIG_DEBUG_PREEMPT, the kernel helpers perform a preemption check
which is omitted by the hyp helpers. Preserve the behavior for nVHE by
overriding the corresponding macros under __KVM_NVHE_HYPERVISOR__. Extend
the checks into VHE hyp code.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-5-dbrazdil@google.com

kvm: arm64: Only define __kvm_ex_table for CONFIG_KVM

Minor cleanup that only creates __kvm_ex_table ELF section and
related symbols if CONFIG_KVM is enabled. Also useful as more
hyp-specific sections will be added.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-4-dbrazdil@google.com

kvm: arm64: Move nVHE hyp namespace macros to hyp_image.h

Minor cleanup to move all macros related to prefixing nVHE hyp section
and symbol names into one place: hyp_image.h.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-3-dbrazdil@google.com

kvm: arm64: Partially link nVHE hyp code, simplify HYPCOPY

Relying on objcopy to prefix the ELF section names of the nVHE hyp code
is brittle and prevents us from using wildcards to match specific
section names.

Improve the build rules by partially linking all '.nvhe.o' files and
prefixing their ELF section names using a linker script. Continue using
objcopy for prefixing ELF symbol names.

One immediate advantage of this approach is that all subsections
matching a pattern can be merged into a single prefixed section, eg.
.text and .text.* can be linked into a single '.hyp.text'. This removes
the need for -fno-reorder-functions on GCC and will be useful in the
future too: LTO builds use .text subsections, compilers routinely
generate .rodata subsections, etc.

Partially linking all hyp code into a single object file also makes it
easier to analyze.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-2-dbrazdil@google.com

arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option

The PR_SPEC_DISABLE_NOEXEC option to the PR_SPEC_STORE_BYPASS prctl()
allows the SSB mitigation to be enabled only until the next execve(),
at which point the state will revert back to PR_SPEC_ENABLE and the
mitigation will be disabled.

Add support for PR_SPEC_DISABLE_NOEXEC on arm64.

Reported-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Pull in task_stack_page() to Spectre-v4 mitigation code

The kbuild robot reports that we're relying on an implicit inclusion to
get a definition of task_stack_page() in the Spectre-v4 mitigation code,
which is not always in place for some configurations:

  | arch/arm64/kernel/proton-pack.c:329:2: error: implicit declaration of function 'task_stack_page' [-Werror,-Wimplicit-function-declaration]
  |         task_pt_regs(task)->pstate |= val;
  |         ^
  | arch/arm64/include/asm/processor.h:268:36: note: expanded from macro 'task_pt_regs'
  |         ((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1)
  |                                           ^
  | arch/arm64/kernel/proton-pack.c:329:2: note: did you mean 'task_spread_page'?

Add the missing include to fix the build error.

Fixes: a44acf477220 ("arm64: Move SSBD prctl() handler alongside other spectre mitigation code")
Reported-by: Anthony Steinhauser <asteinhauser@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202009260013.Ul7AD29w%lkp@intel.com
Signed-off-by: Will Deacon <will@kernel.org>

KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled

Patching the EL2 exception vectors is integral to the Spectre-v2
workaround, where it can be necessary to execute CPU-specific sequences
to nobble the branch predictor before running the hypervisor text proper.

Remove the dependency on CONFIG_RANDOMIZE_BASE and allow the EL2 vectors
to be patched even when KASLR is not enabled.

Fixes: 7a132017e7a5 ("KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202009221053.Jv1XsQUZ%lkp@intel.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Get rid of arm64_ssbd_state

Out with the old ghost, in with the new...

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()

Convert the KVM WA2 code to using the Spectre infrastructure,
making the code much more readable. It also allows us to
take SSBS into account for the mitigation.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

KVM: arm64: Get rid of kvm_arm_have_ssbd()

kvm_arm_have_ssbd() is now completely unused, get rid of it.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

KVM: arm64: Simplify handling of ARCH_WORKAROUND_2

Owing to the fact that the host kernel is always mitigated, we can
drastically simplify the WA2 handling by keeping the mitigation
state ON when entering the guest. This means the guest is either
unaffected or not mitigated.

This results in a nice simplification of the mitigation space,
and the removal of a lot of code that was never really used anyway.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Rewrite Spectre-v4 mitigation code

Rewrite the Spectre-v4 mitigation handling code to follow the same
approach as that taken by Spectre-v2.

For now, report to KVM that the system is vulnerable (by forcing
'ssbd_state' to ARM64_SSBD_UNKNOWN), as this will be cleared up in
subsequent steps.

Signed-off-by: Will Deacon <will@kernel.org>

arm64: Move SSBD prctl() handler alongside other spectre mitigation code

As part of the spectre consolidation effort to shift all of the ghosts
into their own proton pack, move all of the horrible SSBD prctl() code
out of its own 'ssbd.c' file.

Signed-off-by: Will Deacon <will@kernel.org>

arm64: Rename ARM64_SSBD to ARM64_SPECTRE_V4

In a similar manner to the renaming of ARM64_HARDEN_BRANCH_PREDICTOR
to ARM64_SPECTRE_V2, rename ARM64_SSBD to ARM64_SPECTRE_V4. This isn't
_entirely_ accurate, as we also need to take into account the interaction
with SSBS, but that will be taken care of in subsequent patches.

Signed-off-by: Will Deacon <will@kernel.org>

arm64: Treat SSBS as a non-strict system feature

If all CPUs discovered during boot have SSBS, then spectre-v4 will be
considered to be "mitigated". However, we still allow late CPUs without
SSBS to be onlined, albeit with a "SANITY CHECK" warning. This is
problematic for userspace because it means that the system can quietly
transition to "Vulnerable" at runtime.

Avoid this by treating SSBS as a non-strict system feature: if all of
the CPUs discovered during boot have SSBS, then late arriving secondaries
better have it as well.

Signed-off-by: Will Deacon <will@kernel.org>

arm64: Group start_thread() functions together

The is_ttbrX_addr() functions have somehow ended up in the middle of
the start_thread() functions, so move them out of the way to keep the
code readable.

Signed-off-by: Will Deacon <will@kernel.org>

KVM: arm64: Set CSV2 for guests on hardware unaffected by Spectre-v2

If the system is not affected by Spectre-v2, then advertise to the KVM
guest that it is not affected, without the need for a safelist in the
guest.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Rewrite Spectre-v2 mitigation code

The Spectre-v2 mitigation code is pretty unwieldy and hard to maintain.
This is largely due to it being written hastily, without much clue as to
how things would pan out, and also because it ends up mixing policy and
state in such a way that it is very difficult to figure out what's going
on.

Rewrite the Spectre-v2 mitigation so that it clearly separates state from
policy and follows a more structured approach to handling the mitigation.

Signed-off-by: Will Deacon <will@kernel.org>

arm64: Introduce separate file for spectre mitigations and reporting

The spectre mitigation code is spread over a few different files, which
makes it both hard to follow, but also hard to remove it should we want
to do that in future.

Introduce a new file for housing the spectre mitigations, and populate
it with the spectre-v1 reporting code to start with.

Signed-off-by: Will Deacon <will@kernel.org>

arm64: Rename ARM64_HARDEN_BRANCH_PREDICTOR to ARM64_SPECTRE_V2

For better or worse, the world knows about "Spectre" and not about
"Branch predictor hardening". Rename ARM64_HARDEN_BRANCH_PREDICTOR to
ARM64_SPECTRE_V2 as part of moving all of the Spectre mitigations into
their own little corner.

Signed-off-by: Will Deacon <will@kernel.org>

KVM: arm64: Simplify install_bp_hardening_cb()

Use is_hyp_mode_available() to detect whether or not we need to patch
the KVM vectors for branch hardening, which avoids the need to take the
vector pointers as parameters.

Signed-off-by: Will Deacon <will@kernel.org>

KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE

The removal of CONFIG_HARDEN_BRANCH_PREDICTOR means that
CONFIG_KVM_INDIRECT_VECTORS is synonymous with CONFIG_RANDOMIZE_BASE,
so replace it.

Signed-off-by: Will Deacon <will@kernel.org>

arm64: Remove Spectre-related CONFIG_* options

The spectre mitigations are too configurable for their own good, leading
to confusing logic trying to figure out when we should mitigate and when
we shouldn't. Although the plethora of command-line options need to stick
around for backwards compatibility, the default-on CONFIG options that
depend on EXPERT can be dropped, as the mitigations only do anything if
the system is vulnerable, a mitigation is available and the command-line
hasn't disabled it.

Remove CONFIG_HARDEN_BRANCH_PREDICTOR and CONFIG_ARM64_SSBD in favour of
enabling this code unconditionally.

Signed-off-by: Will Deacon <will@kernel.org>

arm64: Run ARCH_WORKAROUND_2 enabling code on all CPUs

Commit 606f8e7b27bf ("arm64: capabilities: Use linear array for
detection and verification") changed the way we deal with per-CPU errata
by only calling the .matches() callback until one CPU is found to be
affected. At this point, .matches() stop being called, and .cpu_enable()
will be called on all CPUs.

This breaks the ARCH_WORKAROUND_2 handling, as only a single CPU will be
mitigated.

In order to address this, forcefully call the .matches() callback from a
.cpu_enable() callback, which brings us back to the original behaviour.

Fixes: 606f8e7b27bf ("arm64: capabilities: Use linear array for detection and verification")
Cc: <stable@vger.kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

Merge branch 'kvm-arm64/pmu-5.9' into kvmarm-master/next

Signed-off-by: Marc Zyngier <maz@kernel.org>

KVM: arm64: Match PMU error code descriptions with error conditions

Update the description of the PMU KVM_{GET, SET}_DEVICE_ATTR error codes
to be a better match for the code that returns them.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20200924123731.268177-3-alexandru.elisei@arm.com

KVM: arm64: Add undocumented return values for PMU device control group

KVM_ARM_VCPU_PMU_V3_IRQ returns -EFAULT if get_user() fails when reading
the interrupt number from kvm_device_attr.addr.

KVM_ARM_VCPU_PMU_V3_INIT returns the error value from kvm_vgic_set_owner().
kvm_arm_pmu_v3_init() checks that the vgic has been initialized and the
interrupt number is valid, but kvm_vgic_set_owner() can still return the
error code -EEXIST if another device has already claimed the interrupt.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20200924123731.268177-2-alexandru.elisei@arm.com

KVM: arm64: Document PMU filtering API

Add a small blurb describing how the event filtering API gets used.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

KVM: arm64: Mask out filtered events in PCMEID{0,1}_EL1

As we can now hide events from the guest, let's also adjust its view of
PCMEID{0,1}_EL1 so that it can figure out why some common events are not
counting as they should.

The astute user can still look into the TRM for their CPU and find out
they've been cheated, though. Nobody's perfect.

Signed-off-by: Marc Zyngier <maz@kernel.org>

KVM: arm64: Add PMU event filtering infrastructure

It can be desirable to expose a PMU to a guest, and yet not want the
guest to be able to count some of the implemented events (because this
would give information on shared resources, for example.

For this, let's extend the PMUv3 device API, and offer a way to setup a
bitmap of the allowed events (the default being no bitmap, and thus no
filtering).

Userspace can thus allow/deny ranges of event. The default policy
depends on the "polarity" of the first filter setup (default deny if the
filter allows events, and default allow if the filter denies events).
This allows to setup exactly what is allowed for a given guest.

Note that although the ioctl is per-vcpu, the map of allowed events is
global to the VM (it can be setup from any vcpu until the vcpu PMU is
initialized).

Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

KVM: arm64: Use event mask matching architecture revision

The PMU code suffers from a small defect where we assume that the event
number provided by the guest is always 16 bit wide, even if the CPU only
implements the ARMv8.0 architecture. This isn't really problematic in
the sense that the event number ends up in a system register, cropping
it to the right width, but still this needs fixing.

In order to make it work, let's probe the version of the PMU that the
guest is going to use. This is done by temporarily creating a kernel
event and looking at the PMUVer field that has been saved at probe time
in the associated arm_pmu structure. This in turn gets saved in the kvm
structure, and subsequently used to compute the event mask that gets
used throughout the PMU code.

Signed-off-by: Marc Zyngier <maz@kernel.org>

KVM: arm64: Refactor PMU attribute error handling

The PMU emulation error handling is pretty messy when dealing with
attributes. Let's refactor it so that we have less duplication,
and that it is easy to extend later on.

A functional change is that kvm_arm_pmu_v3_init() used to return
-ENXIO when the PMU feature wasn't set. The error is now reported
as -ENODEV, matching the documentation. -ENXIO is still returned
when the interrupt isn't properly configured.

Signed-off-by: Marc Zyngier <maz@kernel.org>

arm64: Run ARCH_WORKAROUND_1 enabling code on all CPUs

Commit 73f381660959 ("arm64: Advertise mitigation of Spectre-v2, or lack
thereof") changed the way we deal with ARCH_WORKAROUND_1, by moving most
of the enabling code to the .matches() callback.

This has the unfortunate effect that the workaround gets only enabled on
the first affected CPU, and no other.

In order to address this, forcefully call the .matches() callback from a
.cpu_enable() callback, which brings us back to the original behaviour.

Fixes: 73f381660959 ("arm64: Advertise mitigation of Spectre-v2, or lack thereof")
Cc: <stable@vger.kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Make use of ARCH_WORKAROUND_1 even when KVM is not enabled

We seem to be pretending that we don't have any firmware mitigation
when KVM is not compiled in, which is not quite expected.

Bring back the mitigation in this case.

Fixes: 4db61fef16a1 ("arm64: kvm: Modernize __smccc_workaround_1_smc_start annotations")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

Merge branch 'kvm-arm64/misc-5.10' into kvmarm-master/next

Signed-off-by: Marc Zyngier <maz@kernel.org>

Merge branch 'kvm-arm64/pt-new' into kvmarm-master/next

Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/mmu.c

KVM: arm64: Fix doc warnings in mmu code

Fix following warnings caused by mismatch bewteen function parameters
and comments.
arch/arm64/kvm/mmu.c:128: warning: Function parameter or member 'mmu' not described in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:128: warning: Function parameter or member 'may_block' not described in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:128: warning: Excess function parameter 'kvm' description in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:499: warning: Function parameter or member 'writable' not described in 'kvm_phys_addr_ioremap'
arch/arm64/kvm/mmu.c:538: warning: Function parameter or member 'mmu' not described in 'stage2_wp_range'
arch/arm64/kvm/mmu.c:538: warning: Excess function parameter 'kvm' description in 'stage2_wp_range'

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1600307269-50957-1-git-send-email-tanxiaofei@huawei.com

KVM: arm64: Do not flush memslot if FWB is supported

As a result of a KVM_SET_USER_MEMORY_REGION ioctl, KVM flushes the
dcache for the memslot being changed to ensure a consistent view of memory
between the host and the guest: the host runs with caches enabled, and
it is possible for the data written by the hypervisor to still be in the
caches, but the guest is running with stage 1 disabled, meaning data
accesses are to Device-nGnRnE memory, bypassing the caches entirely.

Flushing the dcache is not necessary when KVM enables FWB, because it
forces the guest to uses cacheable memory accesses.

The current behaviour does not change, as the dcache flush helpers execute
the cache operation only if FWB is not enabled, but walking the stage 2
table is avoided.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915170442.131635-1-alexandru.elisei@arm.com

KVM: arm64: vgic-debug: Convert to use DEFINE_SEQ_ATTRIBUTE macro

Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200916025023.3992679-1-liushixin2@huawei.com

KVM: arm64: Fix inject_fault.c kernel-doc warnings

Fix kernel-doc warnings.
arch/arm64/kvm/inject_fault.c:210: warning: Function parameter or member
'vcpu' not described in 'kvm_inject_undefined'

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1600154512-44624-1-git-send-email-tiantao6@hisilicon.com

KVM: arm64: Try PMD block mappings if PUD mappings are not supported

When userspace uses hugetlbfs for the VM memory, user_mem_abort() tries to
use the same block size to map the faulting IPA in stage 2. If stage 2
cannot the same block mapping because the block size doesn't fit in the
memslot or the memslot is not properly aligned, user_mem_abort() will fall
back to a page mapping, regardless of the block size. We can do better for
PUD backed hugetlbfs by checking if a PMD block mapping is supported before
deciding to use a page.

vma_pagesize is an unsigned long, use 1UL instead of 1ULL when assigning
its value.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200910133351.118191-1-alexandru.elisei@arm.com

Merge branch 'kvm-arm64/nvhe-hyp-context' into kvmarm-master/next

Signed-off-by: Marc Zyngier <maz@kernel.org>

KVM: arm64: nVHE: Fix pointers during SMCCC convertion

The host need not concern itself with the pointer differences for the
hyp interfaces that are shared between VHE and nVHE so leave it to the
hyp to handle.

As the SMCCC function IDs are converted into function calls, it is a
suitable place to also convert any pointer arguments into hyp pointers.
This, additionally, eases the reuse of the handlers in different
contexts.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-20-ascull@google.com

KVM: arm64: nVHE: Migrate hyp-init to SMCCC

To complete the transition to SMCCC, the hyp initialization is given a
function ID. This looks neater than comparing the hyp stub function IDs
to the page table physical address.

Some care is taken to only clobber x0-3 before the host context is saved
as only those registers can be clobbered accoring to SMCCC. Fortunately,
only a few acrobatics are needed. The possible new tpidr_el2 is moved to
the argument in x2 so that it can be stashed in tpidr_el2 early to free
up a scratch register. The page table configuration then makes use of
x0-2.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-19-ascull@google.com

KVM: arm64: nVHE: Migrate hyp interface to SMCCC

Rather than passing arbitrary function pointers to run at hyp, define
and equivalent set of SMCCC functions.

Since the SMCCC functions are strongly tied to the original function
prototypes, it is not expected for the host to ever call an invalid ID
but a warning is raised if this does ever occur.

As __kvm_vcpu_run is used for every switch between the host and a guest,
it is explicitly singled out to be identified before the other function
IDs to improve the performance of the hot path.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-18-ascull@google.com

smccc: Use separate variables for args and results

Using the same register-bound variable for both arguments and results
means these values share a type. That type must allow the arguments to
be assigned to it and must also be assignable to the unsigned long
fields of struct arm_smccc_res.

This restriction on types causes compiler warnings when the argument
cannot be implicitly assigned to an unsigned long, for example the
pointers that are used in the KVM hyp interface.

By separating the arguments and results into their own variables, the
type constraint is lifted allowing the arguments to avoid the need for
any type conversion.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200915104643.2543892-17-ascull@google.com

smccc: Define vendor hyp owned service call region

Vendor specific hypervisor services have their own region of function
identifiers reserved by SMCCC. Extend the list of owners to include this
case.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200915104643.2543892-16-ascull@google.com

KVM: arm64: nVHE: Pass pointers consistently to hyp-init

Rather than some being kernel pointer and others being hyp pointers,
standardize on all pointers being hyp pointers.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-15-ascull@google.com

KVM: arm64: nVHE: Handle hyp panics

Restore the host context when panicking from hyp to give the best chance
of the panic being clean.

The host requires that registers be preserved such as x18 for the shadow
callstack. If the panic is caused by an exception from EL1, the host
context is still valid so the panic can return straight back to the
host. If the panic comes from EL2 then it's most likely that the hyp
context is active and the host context needs to be restored.

There are windows before and after the host context is saved and
restored that restoration is attempted incorrectly and the panic won't
be clean.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-14-ascull@google.com

KVM: arm64: nVHE: Switch to hyp context for EL2

Save and restore the host context when switching to and from hyp. This
gives hyp its own context that the host will not see as a step towards a
full trust boundary between the two.

SP_EL0 and pointer authentication keys are currently shared between the
host and hyp so don't need to be switched yet.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-13-ascull@google.com

KVM: arm64: Share context save and restore macros

To avoid duplicating the context save and restore macros, move them into
a shareable header.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-12-ascull@google.com

KVM: arm64: Restore hyp when panicking in guest context

If the guest context is loaded when a panic is triggered, restore the
hyp context so e.g. the shadow call stack works when hyp_panic() is
called and SP_EL0 is valid when the host's panic() is called.

Use the hyp context's __hyp_running_vcpu field to track when hyp
transitions to and from the guest vcpu so the exception handlers know
whether the context needs to be restored.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-11-ascull@google.com

KVM: arm64: Update context references from host to hyp

Hyp now has its own nominal context for saving and restoring its state
when switching to and from a guest. Update the related comments and
utilities to match the new name.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-10-ascull@google.com

KVM: arm64: Introduce hyp context

During __guest_enter, save and restore from a new hyp context rather
than the host context. This is preparation for separation of the hyp and
host context in nVHE.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-9-ascull@google.com

KVM: arm64: nVHE: Don't consume host SErrors with ESB

The ESB at the start of the host vector may cause SErrors to be consumed
to DISR_EL1. However, this is not checked for the host so the SError
could go unhandled.

Remove the ESB so that SErrors are not consumed but are instead left
pending for the host to consume. __guest_enter already defers entry into
a guest if there are any SErrors pending.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200915104643.2543892-8-ascull@google.com

KVM: arm64: nVHE: Use separate vector for the host

The host is treated differently from the guests when an exception is
taken so introduce a separate vector that is specialized for the host.
This also allows the nVHE specific code to move out of hyp-entry.S and
into nvhe/host.S.

The host is only expected to make HVC calls and anything else is
considered invalid and results in a panic.

Hyp initialization is now passed the vector that is used for the host
and it is swapped for the guest vector during the context switch.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-7-ascull@google.com

KVM: arm64: Save chosen hyp vector to a percpu variable

Introduce a percpu variable to hold the address of the selected hyp
vector that will be used with guests. This avoids the selection process
each time a guest is being entered and can be used by nVHE when a
separate vector is introduced for the host.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-6-ascull@google.com

KVM: arm64: Choose hyp symbol based on context

Make CHOOSE_HYP_SYM select the symbol of the active hypervisor for the
host, the nVHE symbol for nVHE and the VHE symbol for VHE. The nVHE and
VHE hypervisors see their own symbols without prefixes and trigger a
link error when trying to use a symbol of the other hypervisor.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20200915104643.2543892-5-ascull@google.com

KVM: arm64: Remove kvm_host_data_t typedef

The kvm_host_data_t typedef is used inconsistently and goes against the
kernel's coding style. Remove it in favour of the full struct specifier.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-4-ascull@google.com

KVM: arm64: Remove hyp_panic arguments

hyp_panic is able to find all the context it needs from within itself so
remove the argument. The __hyp_panic wrapper becomes redundant so is
also removed.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-3-ascull@google.com

KVM: arm64: Remove __activate_vm wrapper

The __activate_vm wrapper serves no useful function and has a misleading
name as it simply calls __load_guest_stage2 and does not touch
HCR_EL2.VM so remove it.

Also rename __deactivate_vm to __load_host_stage2 to match naming
pattern.

Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-2-ascull@google.com

Merge branch 'kvm-arm64/pt-new' into kvmarm-master/next

Signed-off-by: Marc Zyngier <maz@kernel.org>

KVM: arm64: Don't constrain maximum IPA size based on host configuration

Now that the guest stage-2 page-tables are managed independently from
the host stage-1 page-tables, we can avoid constraining the IPA size
based on the host and instead limit it only based on the PARange field
of the ID_AA64MMFR0 register.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-22-will@kernel.org

KVM: arm64: Remove unused 'pgd' field from 'struct kvm_s2_mmu'

The stage-2 page-tables are entirely encapsulated by the 'pgt' field of
'struct kvm_s2_mmu', so remove the unused 'pgd' field.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-21-will@kernel.org

KVM: arm64: Remove unused page-table code

Now that KVM is using the generic page-table code to manage the guest
stage-2 page-tables, we can remove a bunch of unused macros, #defines
and static inline functions from the old implementation.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-20-will@kernel.org

KVM: arm64: Check the pgt instead of the pgd when modifying page-table

In preparation for removing the 'pgd' field of 'struct kvm_s2_mmu',
update the few remaining users to check the 'pgt' field instead.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-19-will@kernel.org

KVM: arm64: Convert user_mem_abort() to generic page-table API

Convert user_mem_abort() to call kvm_pgtable_stage2_relax_perms() when
handling a stage-2 permission fault and kvm_pgtable_stage2_map() when
handling a stage-2 translation fault, rather than walking the page-table
manually.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-18-will@kernel.org

KVM: arm64: Add support for relaxing stage-2 perms in generic page-table code

Add support for relaxing the permissions of a stage-2 mapping (i.e.
adding additional permissions) to the generic page-table code.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-17-will@kernel.org

KVM: arm64: Convert memslot cache-flushing code to generic page-table API

Convert stage2_flush_memslot() to call the kvm_pgtable_stage2_flush()
function of the generic page-table code instead of walking the page-table
directly.

Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200911132529.19844-16-will@kernel.org

KVM: arm64: Add support for stage-2 cache flushing in generic page-table

Add support for cache flushing a range of the stage-2 address space to
the generic page-table code.

Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200911132529.19844-15-will@kernel.org

KVM: arm64: Convert write-protect operation to generic page-table API

Convert stage2_wp_range() to call the kvm_pgtable_stage2_wrprotect()
function of the generic page-table code instead of walking the page-table
directly.

Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200911132529.19844-14-will@kernel.org

KVM: arm64: Add support for stage-2 write-protect in generic page-table

Add a stage-2 wrprotect() operation to the generic page-table code.

Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200911132529.19844-13-will@kernel.org

KVM: arm64: Convert page-aging and access faults to generic page-table API

Convert the page-aging functions and access fault handler to use the
generic page-table code instead of walking the page-table directly.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-12-will@kernel.org

KVM: arm64: Add support for stage-2 page-aging in generic page-table

Add stage-2 mkyoung(), mkold() and is_young() operations to the generic
page-table code.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-11-will@kernel.org

KVM: arm64: Convert unmap_stage2_range() to generic page-table API

Convert unmap_stage2_range() to use kvm_pgtable_stage2_unmap() instead
of walking the page-table directly.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-10-will@kernel.org

KVM: arm64: Convert kvm_set_spte_hva() to generic page-table API

Convert kvm_set_spte_hva() to use kvm_pgtable_stage2_map() instead
of stage2_set_pte().

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-9-will@kernel.org

KVM: arm64: Convert kvm_phys_addr_ioremap() to generic page-table API

Convert kvm_phys_addr_ioremap() to use kvm_pgtable_stage2_map() instead
of stage2_set_pte().

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-8-will@kernel.org

KVM: arm64: Add support for stage-2 map()/unmap() in generic page-table

Add stage-2 map() and unmap() operations to the generic page-table code.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-7-will@kernel.org

KVM: arm64: Add support for creating kernel-agnostic stage-2 page tables

Introduce alloc() and free() functions to the generic page-table code
for guest stage-2 page-tables and plumb these into the existing KVM
page-table allocator. Subsequent patches will convert other operations
within the KVM allocator over to the generic code.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-6-will@kernel.org

KVM: arm64: Use generic allocator for hyp stage-1 page-tables

Now that we have a shiny new page-table allocator, replace the hyp
page-table code with calls into the new API. This also allows us to
remove the extended idmap code, as we can now simply ensure that the
VA size is large enough to map everything we need.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-5-will@kernel.org

KVM: arm64: Add support for creating kernel-agnostic stage-1 page tables

The generic page-table walker is pretty useless as it stands, because it
doesn't understand enough to allocate anything. Teach it about stage-1
page-tables, and hook up an API for allocating these for the hypervisor
at EL2.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-4-will@kernel.org

KVM: arm64: Add stand-alone page-table walker infrastructure

The KVM page-table code is intricately tied into the kernel page-table
code and re-uses the pte/pmd/pud/p4d/pgd macros directly in an attempt
to reduce code duplication. Unfortunately, the reality is that there is
an awful lot of code required to make this work, and at the end of the
day you're limited to creating page-tables with the same configuration
as the host kernel. Furthermore, lifting the page-table code to run
directly at EL2 on a non-VHE system (as we plan to to do in future
patches) is practically impossible due to the number of dependencies it
has on the core kernel.

Introduce a framework for walking Armv8 page-tables configured
independently from the host kernel.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-3-will@kernel.org

KVM: arm64: Remove kvm_mmu_free_memory_caches()

kvm_mmu_free_memory_caches() is only called by kvm_arch_vcpu_destroy(),
so inline the implementation and get rid of the extra function.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200911132529.19844-2-will@kernel.org