Stefan Ringel [Mon, 15 Feb 2010 17:37:24 +0000 (14:37 -0300)]
V4L/DVB: tm6000: change version to 0.0.2
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Mon, 15 Feb 2010 17:37:21 +0000 (14:37 -0300)]
V4L/DVB: tm6000: special request for all tuner
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Mon, 15 Feb 2010 17:37:19 +0000 (14:37 -0300)]
V4L/DVB: tm6000: reset the numbers of feeds to 8
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Mon, 15 Feb 2010 17:37:18 +0000 (14:37 -0300)]
V4L/DVB: tm6000: add card setup for terratec cinergy hybrid
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Mon, 15 Feb 2010 17:37:17 +0000 (14:37 -0300)]
V4L/DVB: tm6000: add different tuner reset for terratec
[mchehab@redhat.com: Fix CodingStyle]
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Mon, 15 Feb 2010 17:37:16 +0000 (14:37 -0300)]
V4L/DVB: tm6000: add additional init register for tm6010
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 12 Feb 2010 06:52:46 +0000 (03:52 -0300)]
V4L/DVB: tm6000: fix mutex lock unbalance
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 12 Feb 2010 06:51:43 +0000 (03:51 -0300)]
V4L/DVB: tm6000: only register after initialized
Udev calls an utility when it senses a v4l device. So, register needs
to be delayed, otherwise it may cause block conditions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Julia Lawall [Thu, 11 Feb 2010 06:30:30 +0000 (03:30 -0300)]
V4L/DVB: drivers/staging/tm6000/tm6000-video.c: correct NULL test
Test the just-allocated value for NULL rather than some other value.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y;
statement S;
@@
x = \(kmalloc\|kcalloc\|kzalloc\)(...);
(
if ((x) == NULL) S
|
if (
- y
+ x
== NULL)
S
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Randy Dunlap [Wed, 10 Feb 2010 17:53:57 +0000 (14:53 -0300)]
V4L/DVB: tm6000: fix build errors
(1) tm6000 uses usb_*() interfaces, so it should depend on USB.
drivers/built-in.o: In function `tm6000_usb_disconnect':
tm6000-cards.c:(.text+0x4abb44): undefined reference to `usb_put_dev'
drivers/built-in.o: In function `tm6000_usb_probe':
tm6000-cards.c:(.text+0x4ac923): undefined reference to `usb_get_dev'
tm6000-cards.c:(.text+0x4ac93c): undefined reference to `usb_set_interface'
drivers/built-in.o: In function `tm6000_read_write_usb':
(.text+0x4ad274): undefined reference to `usb_control_msg'
drivers/built-in.o: In function `tm6000_uninit_isoc':
tm6000-video.c:(.text+0x4b00d5): undefined reference to `usb_kill_urb'
tm6000-video.c:(.text+0x4b00e4): undefined reference to `usb_unlink_urb'
tm6000-video.c:(.text+0x4b013c): undefined reference to `usb_buffer_free'
tm6000-video.c:(.text+0x4b014b): undefined reference to `usb_free_urb'
drivers/built-in.o: In function `tm6000_prepare_isoc':
tm6000-video.c:(.text+0x4b0773): undefined reference to `usb_alloc_urb'
tm6000-video.c:(.text+0x4b0835): undefined reference to `usb_buffer_alloc'
drivers/built-in.o: In function `tm6000_irq_callback':
tm6000-video.c:(.text+0x4b1ad3): undefined reference to `usb_submit_urb'
drivers/built-in.o: In function `tm6000_module_init':
tm6000-cards.c:(.init.text+0x24499): undefined reference to `usb_register_driver'
drivers/built-in.o: In function `tm6000_module_exit':
tm6000-cards.c:(.exit.text+0x5cb0): undefined reference to `usb_deregister'
(2) tm6000-alsa uses interfaces from tm6000-core, so when they are
both built as modules, the core interfaces need to be exported.
ERROR: "tm6000_set_reg" [drivers/staging/tm6000/tm6000-alsa.ko] undefined!
ERROR: "tm6000_get_reg" [drivers/staging/tm6000/tm6000-alsa.ko] undefined!
Cc: linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>, linux-media@vger.kernel.org
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 8 Feb 2010 10:43:41 +0000 (08:43 -0200)]
V4L/DVB: tm6000: move board-specific init to tm6000-cards
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 8 Feb 2010 10:44:26 +0000 (08:44 -0200)]
V4L/DVB: tm6000: Allow tm6000 driver compilation
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Fri, 5 Feb 2010 23:06:54 +0000 (20:06 -0300)]
V4L/DVB: tm6000: add a different set param values
Fix several parameter sets, in order to make dvb work
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Fri, 5 Feb 2010 23:06:52 +0000 (20:06 -0300)]
V4L/DVB: tm6000: Fix several bugs at the usb DVB transfer
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Fri, 5 Feb 2010 22:57:08 +0000 (19:57 -0300)]
V4L/DVB: tm6000: remove unused function
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Fri, 5 Feb 2010 22:57:07 +0000 (19:57 -0300)]
V4L/DVB: tm6000: add tuner parameter for DVB devices
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Fri, 5 Feb 2010 22:57:06 +0000 (19:57 -0300)]
V4L/DVB: tm6000: add tuner callback for dvb frontend
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Fri, 5 Feb 2010 22:57:04 +0000 (19:57 -0300)]
V4L/DVB: tm6000: add special usb request to quit i2c tuner transfer
After sending an i2c command, tm6010 needs a reset, in order to properly
work.
While here, add the missing I2C_CLASS_TV_DIGITAL i2c class.
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Fri, 5 Feb 2010 22:57:03 +0000 (19:57 -0300)]
V4L/DVB: tm6000: typo fix: the identifer string is wrong
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Fri, 5 Feb 2010 22:57:02 +0000 (19:57 -0300)]
V4L/DVB: tm6000: fix: avoid unregister the driver after success
After successfully running tm6000_init_dev, due to a lack of a return(),
the driver runs the error code, unregistering the device.
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 8 Feb 2010 10:50:02 +0000 (08:50 -0200)]
V4L/DVB: tm6000: add Terratec Cinergy Hybrid XE
[mchehab@redhat.com: moved the defines for the two beholder boards to a separate commit ]
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 8 Feb 2010 10:48:22 +0000 (08:48 -0200)]
V4L-DVB: tm6000: add missing BEHOLDER board definitions
The missing of those board definitions break compilation
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Wed, 3 Feb 2010 20:27:23 +0000 (17:27 -0300)]
V4L/DVB: tm6000: add digital init for tm6010
The init sequence requires extra initialization for tm6010 in digital
mode.
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Wed, 3 Feb 2010 21:48:24 +0000 (18:48 -0300)]
V4L/DVB: tm6000: fix driver compilation
The name of xc5000.h include file were wrong
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 19 Jan 2010 04:38:45 +0000 (01:38 -0300)]
V4L/DVB: xc3028: fix regression in firmware loading time
Fix a regression in the firmware loading time where it went from 1080 ms to
4700 ms. This was noticed when the em28xx based HVR-950 took noticably longer
to load the driver.
Regression introduced in hg 12824. The developer added an msleep() call with
an argument based on a newly introduced xc3028_ctrl field, which is left
initialized to zero for pretty much every board that is currently supported.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Thu, 10 Dec 2009 13:55:34 +0000 (11:55 -0200)]
V4L/DVB (13556a): v4l: Remove unneeded video_device::minor assignments
Now that the video_device registration is tested using
video_is_registered(), drivers don't need to initialize the
video_device::minor field to -1 anymore.
Remove those unneeded assignments.
[mchehab.redhat.com: apply just the tm6000 changes on a separate patch]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 18 May 2010 03:43:18 +0000 (00:43 -0300)]
V4L/DVB (13555a): v4l: Use video_device_node_name() instead of the minor number
Instead of using the minor number in kernel log messages, use the device
node name as returned by the video_device_node_name() function. This
makes debug, informational and error messages easier to understand for
end users.
[mchehab.redhat.com: apply just the tm6000 changes on a separate patch]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitri Belimov [Tue, 10 Nov 2009 04:37:43 +0000 (01:37 -0300)]
V4L/DVB (13403): Add new TV cards of Beholder
Add new TV cards of Beholder for autodetect.
With my best regards, Dmitry.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 18 Sep 2009 04:44:24 +0000 (01:44 -0300)]
tm6000: Remove legacy code to work with older kernel versions
Such code has no space upstream and prevents tm6000 from compiling.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Sep 2009 02:13:53 +0000 (23:13 -0300)]
V4L/DVB (12854): tm6000: i2c addresses should now be specified in 7bit formats
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 14 Sep 2009 20:16:32 +0000 (17:16 -0300)]
V4L/DVB (12853): tm6000: Fix almost all warnings at the driver
Onr warning is left, since it is there for a purpose:
tm6000-core.c:218: warning: ISO C90 forbids mixed declarations and code
It indicates a place where a temporary hack were added. Tests are needed to be sure that
we can remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 14 Sep 2009 19:37:13 +0000 (16:37 -0300)]
V4L/DVB (12852): tm6000: Fix compilation against 2.6.31
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 14 Sep 2009 16:04:08 +0000 (13:04 -0300)]
V4L/DVB (12848): tm6000: Add README with todo list
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 2 Dec 2008 11:30:16 +0000 (08:30 -0300)]
V4L/DVB (12846): tuner-xc2028: Fix skip code for devices with broken read (tm6000)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 28 Nov 2008 10:39:00 +0000 (07:39 -0300)]
V4L/DVB (12845): tm6000: more buffer handling fixes
Before this patch, we were writing outside vmalloced buffer
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 28 Nov 2008 09:44:06 +0000 (06:44 -0300)]
V4L/DVB (12844): tm6000: avoid writing on a floating pointer
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 28 Nov 2008 09:42:24 +0000 (06:42 -0300)]
V4L/DVB (12843): tm6000: cleanup: remove a test debug code
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 26 Oct 2008 12:18:53 +0000 (09:18 -0300)]
V4L/DVB (12842): tm6000: avoid kernel panic while retrieving the filling buffer
Instead of storing next buf on a temp var, saved over URB
processing, restore it using get_next_buf.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Oct 2008 13:43:04 +0000 (10:43 -0300)]
V4L/DVB (12841): tm6000: Fix compilation with newer v4l2-dev API
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Oct 2008 11:56:22 +0000 (08:56 -0300)]
V4L/DVB (12840): tm6000: add support for HVR900H
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Oct 2008 11:56:22 +0000 (08:56 -0300)]
V4L/DVB (12839): tm6000: Another trial to fix analog streaming
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Oct 2008 11:56:16 +0000 (08:56 -0300)]
V4L/DVB (12838): tm6000: Fix color support on tm6010
TM6010 uses some different registers for format support.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Maykel Moya [Mon, 28 Apr 2008 22:20:26 +0000 (19:20 -0300)]
V4L/DVB (12837): tm6000: make tree buildable
Signed-off-by: Maykel Moya <moya@infomed.sld.cu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Apr 2008 11:07:20 +0000 (08:07 -0300)]
V4L/DVB (12836): tm6000: revert to an old way to copy video
The new way is causing machine hangups. This one works.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Apr 2008 04:49:19 +0000 (01:49 -0300)]
V4L/DVB (12835): tm6000: Cleanups to work like em28xx-video
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 11 Jan 2008 16:55:45 +0000 (13:55 -0300)]
V4L/DVB (12834): tm6000: Fix two warnings
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 11 Jan 2008 16:51:45 +0000 (13:51 -0300)]
V4L/DVB (12833): tm6000: add a proper init code for -alsa
Uses about the same initialization code as defined on usbaudio.c.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 11 Jan 2008 16:19:45 +0000 (13:19 -0300)]
V4L/DVB (12832): tm6000: allow compilation of tm6000-alsa module
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 11 Jan 2008 16:19:09 +0000 (13:19 -0300)]
V4L/DVB (12831): tm6000: Convert cx88-alsa into tm6000-alsa
- Remove cx88 specific setups;
- Add tm6000 specific start/stop commands;
- Do CodingStyle cleanups.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 11 Jan 2008 13:28:50 +0000 (10:28 -0300)]
V4L/DVB (12830): tm6000: copy cx88-alsa as tm6000-alsa
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 10 Jan 2008 20:27:26 +0000 (17:27 -0300)]
V4L/DVB (12829): tm6000: several changes on usb preparation trying to avoid -EPROTO errors
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 10 Jan 2008 01:44:51 +0000 (22:44 -0300)]
V4L/DVB (12828): tm6000: fixes several CodingStyle and do some cleanups
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Jan 2008 21:12:39 +0000 (18:12 -0300)]
V4L/DVB (12827): tm6000: fix image hangs
A previous committed patch hanged image output. This patch corrects this issue.
It also warrants that buffer is updated for each frame0+frame1 frame set.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 8 Jan 2008 14:27:59 +0000 (11:27 -0300)]
V4L/DVB (12826): tm6000: adds 10ms delay between two consecutive i2c write ops
tm6000 original driver seems to use a delay between two consecutive i2c write
operations.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 14 Sep 2009 13:23:20 +0000 (10:23 -0300)]
V4L/DVB (12825): tm6000: I2C reading operations is not reliable on tm6000
tm6000 sometimes can't read from i2c, but this is currently required for
tuner-xc2028 to work.
This patch adds an option to tuner-xc2028 to not rely on i2c reading.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 8 Jan 2008 14:26:59 +0000 (11:26 -0300)]
V4L/DVB (12824): tuner-xc2028: adds an option to send i2c data on slower speed
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 8 Jan 2008 14:25:57 +0000 (11:25 -0300)]
V4L/DVB (12823): tm6000: Uses another method for handling incomplete packets
This requires a little more memory, and some memcpy to work, but the logic is
simpler than the previous method.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 8 Jan 2008 14:19:22 +0000 (11:19 -0300)]
V4L/DVB (12822): tm6000: Add support for tm6010
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Chris Pascoe [Sat, 24 Nov 2007 07:34:42 +0000 (04:34 -0300)]
V4L/DVB (12821): tm6000: update USB request names and clean up i2c routine
Update the descriptions of the USB request types so that they match what
we now know they do.
Rework the i2c_xfer function so that it is more explicit what sort of I2C
transfers it is that the tm6000 can't perform.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Christopher Pascoe [Fri, 23 Nov 2007 16:18:56 +0000 (13:18 -0300)]
V4L/DVB (12820): tm6000: fix i2c readings
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 23 Nov 2007 16:00:18 +0000 (13:00 -0300)]
V4L/DVB (12819): tm6000: mts parameter has changed on tuner-xc2028.c
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Mon, 19 Nov 2007 09:10:54 +0000 (06:10 -0300)]
V4L/DVB (12818): tm6000: Use dvb_frontend_detach instead of single symbol_put commands
Thanks to Mike Krufky for pointed that one out. Also include some minor
cleanups.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Fri, 16 Nov 2007 21:07:12 +0000 (18:07 -0300)]
V4L/DVB (12817): tm6000: add a missing symbol_put
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Fri, 16 Nov 2007 16:16:59 +0000 (13:16 -0300)]
V4L/DVB (12816): tm6000: fix tm6000 attach method and fix a few CodingStyles
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 15 Nov 2007 19:37:35 +0000 (16:37 -0300)]
V4L/DVB (12815): tm6000: follow videobuf API changes
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 5 Nov 2007 18:39:41 +0000 (15:39 -0300)]
V4L/DVB (12814): tm6000: fix eeprom reading on tm6000
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 5 Nov 2007 14:03:04 +0000 (11:03 -0300)]
V4L/DVB (12813): tm6000: all read messages should use prev_reg
read messages with length>1 where using the wrong register.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Sun, 4 Nov 2007 19:36:15 +0000 (16:36 -0300)]
V4L/DVB (12812): tm6000: fix build dependencies for tm6000 and tuner-xc2028
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 2 Nov 2007 14:54:18 +0000 (11:54 -0300)]
V4L/DVB (12811): tm6000: a few registers is needed from the sif/noif setings
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 2 Nov 2007 14:23:14 +0000 (11:23 -0300)]
V4L/DVB (12810): tm6000: Avoid sending xc3028 setups for other tuners
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 2 Nov 2007 14:16:35 +0000 (11:16 -0300)]
V4L/DVB (12809): tm6000: Remove an old hack
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 2 Nov 2007 12:51:13 +0000 (09:51 -0300)]
V4L/DVB (12808): tm6000: Move analog tv standards to tm6000-stds
tm5600/6000/6010 requires a large config table for video standards. Better to
move this to their own file.
Also added register settings for tm6010 (needs testing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 24 Oct 2007 12:22:08 +0000 (09:22 -0300)]
V4L/DVB (12807): tm6000: Properly select xc2028 parameters
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 23 Oct 2007 19:36:55 +0000 (16:36 -0300)]
V4L/DVB (12806): tm6000: Select VIDEO_TUNER for tm6000 devices
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 15 Oct 2007 18:43:50 +0000 (15:43 -0300)]
V4L/DVB (12805): tm6000: Fix a memory leak at tm6000-video
if a transfer buffer allocation fails, the last allocated urb is leaked
(it hasn't been stored in dev->urb[] yet so tm6000_uninit_isoc misses
it). The patch also includes a small typo fix.
Thanks to Florin Malita <fmalita@gmail.com> for pointing this.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Wed, 10 Oct 2007 06:50:10 +0000 (03:50 -0300)]
V4L/DVB (12804): tm6000: Build the module properly if CONFIG_VIDEO_TM6000_DVB is selected.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 1 Oct 2007 09:45:22 +0000 (06:45 -0300)]
V4L/DVB (12803): tm6000: make tm6000_devused static
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Sep 2007 21:27:35 +0000 (18:27 -0300)]
V4L/DVB (12802): tm6000: adds command to enable audio output at tm6000
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Mon, 24 Sep 2007 20:01:49 +0000 (17:01 -0300)]
V4L/DVB (12801): tm6000: Add support for ADSTech Mini Dual TV (PTV-339).
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 22 Sep 2007 05:06:25 +0000 (02:06 -0300)]
V4L/DVB (12800): tm6000: fix tm6000 analog video buffer handling
Previously, there were no sync between video buffer filling and received
URBs. So, the presented image were a mix of frame and frame-1. Now, a
filled buffer should contain only data for that frame.
allocates a maximum of 64 KB per each URB area. This fixed two bugs:
- Sometimes, there were no available continuos block of about 1 MB;
- Image weren't not properly updated, since parts of the URBs aren't
updated.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 19 Sep 2007 19:24:05 +0000 (16:24 -0300)]
V4L/DVB (12799): tm6000: avoid troubles if a header is broken on separate URBs
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 19 Sep 2007 18:39:22 +0000 (15:39 -0300)]
V4L/DVB (12798): tm6000: Split header processing from header find
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 19 Sep 2007 10:36:34 +0000 (07:36 -0300)]
V4L/DVB (12797): tm6000: Allow selecting audio bitrate
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 19 Sep 2007 10:35:18 +0000 (07:35 -0300)]
V4L/DVB (12796): tm6000: Add a hack for PAL standards
The common code is not properly working. This hack should do the work
for now.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 6 Sep 2007 23:12:10 +0000 (20:12 -0300)]
V4L/DVB (12795): tm6000: Fix buffering size
At the first time an application were called, resolutions were wrong.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 4 Sep 2007 00:51:45 +0000 (21:51 -0300)]
V4L/DVB (12794): tm6000: handle also PAL/SECAM resolutions
Fix the resolutions for 625 line video standards (european PAL/SECAM)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 4 Sep 2007 00:24:52 +0000 (21:24 -0300)]
V4L/DVB (12793): tm6000: On some kernels, eeprom reading were generating a bug
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 27 Aug 2007 10:55:38 +0000 (07:55 -0300)]
V4L/DVB (12791): tm6000: fix poll() method
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 27 Aug 2007 10:55:05 +0000 (07:55 -0300)]
V4L/DVB (12790): tm6000: check for errors on usb->status
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 25 Aug 2007 11:35:31 +0000 (08:35 -0300)]
V4L/DVB (12789): tm6000: fix DVB dependency
Compilation were causing errors, if DVB_CORE weren't selected.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Tue, 21 Aug 2007 20:37:22 +0000 (17:37 -0300)]
V4L/DVB (12788): tm6000: Add initial DVB-T support
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Tue, 21 Aug 2007 19:05:43 +0000 (16:05 -0300)]
V4L/DVB (12786): tm6000: Remove code dealing with the ZL10353
Remove code dealing with the ZL10353 as this is all handled by the ZL10353
module.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Tue, 24 Jul 2007 11:08:52 +0000 (08:08 -0300)]
V4L/DVB (12785): tm6000: allow user gpio address for tuner reset
Modify tuner_callback to user the device's GPIO address field
for tuner reset.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 19 Jul 2007 02:14:25 +0000 (23:14 -0300)]
V4L/DVB (12784): tm6000: Some cleanups at the driver
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Wed, 18 Jul 2007 13:29:10 +0000 (10:29 -0300)]
V4L/DVB (12783): tm6000: add xc2028/3028 to dvb
Add experimental DVB frontend tuner interface to xc2028/3028
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Tue, 24 Jul 2007 11:06:45 +0000 (08:06 -0300)]
V4L/DVB (12782): tm6000: Correct some device capabilities
Add tuner reset GPIO and demodulator address fields to the tm6000_core
struct.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 19 Jul 2007 14:09:58 +0000 (11:09 -0300)]
V4L/DVB (12781): tm6000: Start adding support for GPIO device-specific parameters
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Wed, 18 Jul 2007 13:26:38 +0000 (10:26 -0300)]
V4L/DVB (12780): tm6000: Improve handling of SMBus Write Byte commands followed by a read command.
SMBus Write Byte commands followed by a read command on the same I2C
address are not sent out to the chip as they wouldn't have any effect.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Mon, 2 Jul 2007 23:59:58 +0000 (20:59 -0300)]
V4L/DVB (12779): tm6000: Correct dev init & Add general USB ctrl msg pause
Add GPIO4 reset, which is required to make DVB-T work with the Freecom
stick.
Add a general 5 ms pause to the "tm6000_read_write_usb" method.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Ludwig [Fri, 29 Jun 2007 12:51:39 +0000 (09:51 -0300)]
V4L/DVB (12778): tm6000: Fix SMBus Read Byte command
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / profile / common / kernel-common.git / log