crypto: qat - abstract PFVF send function

Make the PFVF send function device specific.

This is in preparation for the introduction of PFVF support in the
qat_4xxx driver since the send logic differs between QAT GEN2 and
QAT GEN4 devices.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - differentiate between pf2vf and vf2pf offset

Add the function get_vf2pf_offset() to adf_pfvf_ops to differentiate the
CSRs used for pf2vf and vf2pf.

Offsets may or may not be direction specific depending on QAT
generation. Since in QAT GEN2 the CSR is not direction specific, i.e.
there is a single mailbox register shared for pf2vf and vf2pf, both
get_vf2pf_offset() and get_vf2pf_offset() will return the same offset.

This change is to make the direction explicit, so it is easier to
understand and debug and also in preparation for the introduction of
PFVF support in the qat_4xxx driver since QAT GEN4 devices have a
separate CSR for pf2vf and vf2pf communications.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - add pfvf_ops

Add pfvf_ops structure to isolate PFVF related functions inside the
adf_hw_device_data structure.

For GEN2, the structure is populated using one of the two helper
functions, adf_gen2_init_pf_pfvf_ops() or adf_gen2_init_vf_pfvf_ops(),
for the PF and VF driver respectively.

For the DH895XCC PF driver, the structure is populated using
adf_gen2_init_pf_pfvf_ops() but some of the functions are then
overwritten.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - relocate PFVF disabled function

Move the function pfvf_comms_disabled() from the qat_4xxx module to
intel_qat as it will be used by other components to keep the PFVF
feature disabled.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - relocate PFVF VF related logic

Move device specific PFVF logic related to the VF to the newly created
adf_gen2_pfvf.c.
This refactory is done to isolate the GEN2 PFVF code into its own file
in preparation for the introduction of support for PFVF for GEN4
devices.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - relocate PFVF PF related logic

Move device specific PFVF logic related to the PF to the newly created
adf_gen2_pfvf.c.
This refactory is done to isolate the GEN2 PFVF code into its own file
in preparation for the introduction of support for PFVF for GEN4
devices.

In addition the PFVF PF logic for dh895xcc has been isolated to
adf_dh895xcc_hw_data.c.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - handle retries due to collisions in adf_iov_putmsg()

Rework __adf_iov_putmsg() to handle retries due to collisions
internally, removing the need for an external retry loop.
The functions __adf_iov_putmsg() and adf_iov_putmsg() have been merged
together maintaining the adf_iov_putmsg() name.

This will allow to use this function only for GEN2 devices, since
collision are peculiar of this generation and therefore should be
confined to the actual implementation of the transport/medium access.

Note that now adf_iov_putmsg() will retry to send a message only in case
of collisions and will now fail if an ACK is not received from the
remote function.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - split PFVF message decoding from handling

Refactor the receive and handle logic to separate the parsing and
handling of the PFVF message from the initial retrieval and ACK.

This is to allow the intoduction of the recv function in a subsequent
patch.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - re-enable interrupts for legacy PFVF messages

If a PFVF message with MSGORIGIN_SYSTEM not set is received, re-enable
interrupts allowing the processing of new messages.
This is to simplify the refactoring of the recv function in a subsequent
patch.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - change PFVF ACK behaviour

Change the PFVF receipt flow on the VF side to read, ack and handle the
message instead of read, handle and ack.
This is done for (1) consistency with the PF side, see the function
adf_recv_and_handle_vf2pf_msg() in adf_pf2vf_msg.c, and (2) performance
reasons, to avoid keeping the CSR busy while parsing the message.

In addition, do not ACK PFVF legacy messages, as this driver is not
capable of handling PFVF legacy messages.
If a PFVF message with MSGORIGIN not set is received, do nothing.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - move interrupt code out of the PFVF handler

Move the interrupt handling call from the PF specific protocol file,
adf_pf2vf_msg.c, to adf_sriov.c to maintain the PFVF files focused on
the protocol handling.

The function adf_vf2pf_req_hndl() has been renamed as
adf_recv_and_handle_vf2pf_msg() to reflect its actual purpose and
maintain consistency with the VF side. This function now returns a
boolean indicating to the caller if interrupts need to be re-enabled or
not.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - move VF message handler to adf_vf2pf_msg.c

Move the reading and parsing of a PF2VF message from the bottom half
function in adf_vf_isr.c, adf_pf2vf_bh_handler(), to the PFVF protocol
file adf_vf2pf_msg.c, for better code organization.

The receive and handle logic has been moved to a new function called
adf_recv_and_handle_pf2vf_msg() which returns a boolean indicating if
interrupts need to be re-enabled or not.
A slight refactoring has been done to avoid calculating the PF2VF CSR
offset twice and repeating the clearing of the PF2VFINT bit.

The "PF restarting" logic, now defined in the function
adf_pf2vf_handle_pf_restaring(), has been kept in adf_vf_isr.c due to
the dependencies with the adf_vf_stop_wq workqueue.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - move vf2pf interrupt helpers

Move vf2pf interrupt enable and disable functions from adf_pf2vf_msg.c
to adf_isr.c
This it to separate the interrupt related code from the PFVF protocol
logic.

With this change, the function adf_disable_vf2pf_interrupts_irq() is
only called from adf_isr.c and it has been marked as static.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - refactor PF top half for PFVF

Move logic associated to handling VF2PF interrupt to its own function.
This will simplify the handling of multiple interrupt sources in the
function adf_msix_isr_ae() in the future.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - fix undetected PFVF timeout in ACK loop

If the remote function did not ACK the reception of a message, the
function __adf_iov_putmsg() could detect it as a collision.

This was due to the fact that the collision and the timeout checks after
the ACK loop were in the wrong order. The timeout must be checked at the
end of the loop, so fix by swapping the order of the two checks.

Fixes: 9b768e8a3909 ("crypto: qat - detect PFVF collision after ACK")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - do not handle PFVF sources for qat_4xxx

The QAT driver does not have support for PFVF interrupts for GEN4
devices, therefore report the vf2pf sources as 0.
This prevents a NULL pointer dereference in the function
adf_msix_isr_ae() if the device triggers a spurious interrupt.

Fixes: 993161d36ab5 ("crypto: qat - fix handling of VF to PF interrupts")
Reported-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drbg - reseed 'nopr' drbgs periodically from get_random_bytes()

In contrast to the fully prediction resistant 'pr' DRBGs, the 'nopr'
variants get seeded once at boot and reseeded only rarely thereafter,
namely only after 2^20 requests have been served each. AFAICT, this
reseeding based on the number of requests served is primarily motivated
by information theoretic considerations, c.f. NIST SP800-90Ar1,
sec. 8.6.8 ("Reseeding").

However, given the relatively large seed lifetime of 2^20 requests, the
'nopr' DRBGs can hardly be considered to provide any prediction resistance
whatsoever, i.e. to protect against threats like side channel leaks of the
internal DRBG state (think e.g. leaked VM snapshots). This is expected and
completely in line with the 'nopr' naming, but as e.g. the
"drbg_nopr_hmac_sha512" implementation is potentially being used for
providing the "stdrng" and thus, the crypto_default_rng serving the
in-kernel crypto, it would certainly be desirable to achieve at least the
same level of prediction resistance as get_random_bytes() does.

Note that the chacha20 rngs underlying get_random_bytes() get reseeded
every CRNG_RESEED_INTERVAL == 5min: the secondary, per-NUMA node rngs from
the primary one and the primary rng in turn from the entropy pool, provided
sufficient entropy is available.

The 'nopr' DRBGs do draw randomness from get_random_bytes() for their
initial seed already, so making them to reseed themselves periodically from
get_random_bytes() in order to let them benefit from the latter's
prediction resistance is not such a big change conceptually.

In principle, it would have been also possible to make the 'nopr' DRBGs to
periodically invoke a full reseeding operation, i.e. to also consider the
jitterentropy source (if enabled) in addition to get_random_bytes() for the
seed value. However, get_random_bytes() is relatively lightweight as
compared to the jitterentropy generation process and thus, even though the
'nopr' reseeding is supposed to get invoked infrequently, it's IMO still
worthwhile to avoid occasional latency spikes for drbg_generate() and
stick to get_random_bytes() only. As an additional remark, note that
drawing randomness from the non-SP800-90B-conforming get_random_bytes()
only won't adversely affect SP800-90A conformance either: the very same is
being done during boot via drbg_seed_from_random() already once
rng_is_initialized() flips to true and it follows that if the DRBG
implementation does conform to SP800-90A now, it will continue to do so.

Make the 'nopr' DRBGs to reseed themselves periodically from
get_random_bytes() every CRNG_RESEED_INTERVAL == 5min.

More specifically, introduce a new member ->last_seed_time to struct
drbg_state for recording in units of jiffies when the last seeding
operation had taken place. Make __drbg_seed() maintain it and let
drbg_generate() invoke a reseed from get_random_bytes() via
drbg_seed_from_random() if more than 5min have passed by since the last
seeding operation. Be careful to not to reseed if in testing mode though,
or otherwise the drbg related tests in crypto/testmgr.c would fail to
reproduce the expected output.

In order to keep the formatting clean in drbg_generate() wrap the logic
for deciding whether or not a reseed is due in a new helper,
drbg_nopr_reseed_interval_elapsed().

Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drbg - make drbg_prepare_hrng() handle jent instantiation errors

Now that drbg_prepare_hrng() doesn't do anything but to instantiate a
jitterentropy crypto_rng instance, it looks a little odd to have the
related error handling at its only caller, drbg_instantiate().

Move the handling of jitterentropy allocation failures from
drbg_instantiate() close to the allocation itself in drbg_prepare_hrng().

There is no change in behaviour.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drbg - make reseeding from get_random_bytes() synchronous

get_random_bytes() usually hasn't full entropy available by the time DRBG
instances are first getting seeded from it during boot. Thus, the DRBG
implementation registers random_ready_callbacks which would in turn
schedule some work for reseeding the DRBGs once get_random_bytes() has
sufficient entropy available.

For reference, the relevant history around handling DRBG (re)seeding in
the context of a not yet fully seeded get_random_bytes() is:

  commit 16b369a91d0d ("random: Blocking API for accessing
                        nonblocking_pool")
  commit 4c7879907edd ("crypto: drbg - add async seeding operation")

  commit 205a525c3342 ("random: Add callback API for random pool
                        readiness")
  commit 57225e679788 ("crypto: drbg - Use callback API for random
                        readiness")
  commit c2719503f5e1 ("random: Remove kernel blocking API")

However, some time later, the initialization state of get_random_bytes()
has been made queryable via rng_is_initialized() introduced with commit
9a47249d444d ("random: Make crng state queryable"). This primitive now
allows for streamlining the DRBG reseeding from get_random_bytes() by
replacing that aforementioned asynchronous work scheduling from
random_ready_callbacks with some simpler, synchronous code in
drbg_generate() next to the related logic already present therein. Apart
from improving overall code readability, this change will also enable DRBG
users to rely on wait_for_random_bytes() for ensuring that the initial
seeding has completed, if desired.

The previous patches already laid the grounds by making drbg_seed() to
record at each DRBG instance whether it was being seeded at a time when
rng_is_initialized() still had been false as indicated by
->seeded == DRBG_SEED_STATE_PARTIAL.

All that remains to be done now is to make drbg_generate() check for this
condition, determine whether rng_is_initialized() has flipped to true in
the meanwhile and invoke a reseed from get_random_bytes() if so.

Make this move:
- rename the former drbg_async_seed() work handler, i.e. the one in charge
  of reseeding a DRBG instance from get_random_bytes(), to
  "drbg_seed_from_random()",
- change its signature as appropriate, i.e. make it take a struct
  drbg_state rather than a work_struct and change its return type from
  "void" to "int" in order to allow for passing error information from
  e.g. its __drbg_seed() invocation onwards to callers,
- make drbg_generate() invoke this drbg_seed_from_random() once it
  encounters a DRBG instance with ->seeded == DRBG_SEED_STATE_PARTIAL by
  the time rng_is_initialized() has flipped to true and
- prune everything related to the former, random_ready_callback based
  mechanism.

As drbg_seed_from_random() is now getting invoked from drbg_generate() with
the ->drbg_mutex being held, it must not attempt to recursively grab it
once again. Remove the corresponding mutex operations from what is now
drbg_seed_from_random(). Furthermore, as drbg_seed_from_random() can now
report errors directly to its caller, there's no need for it to temporarily
switch the DRBG's ->seeded state to DRBG_SEED_STATE_UNSEEDED so that a
failure of the subsequently invoked __drbg_seed() will get signaled to
drbg_generate(). Don't do it then.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drbg - move dynamic ->reseed_threshold adjustments to __drbg_seed()

Since commit 42ea507fae1a ("crypto: drbg - reseed often if seedsource is
degraded"), the maximum seed lifetime represented by ->reseed_threshold
gets temporarily lowered if the get_random_bytes() source cannot provide
sufficient entropy yet, as is common during boot, and restored back to
the original value again once that has changed.

More specifically, if the add_random_ready_callback() invoked from
drbg_prepare_hrng() in the course of DRBG instantiation does not return
-EALREADY, that is, if get_random_bytes() has not been fully initialized
at this point yet, drbg_prepare_hrng() will lower ->reseed_threshold
to a value of 50. The drbg_async_seed() scheduled from said
random_ready_callback will eventually restore the original value.

A future patch will replace the random_ready_callback based notification
mechanism and thus, there will be no add_random_ready_callback() return
value anymore which could get compared to -EALREADY.

However, there's __drbg_seed() which gets invoked in the course of both,
the DRBG instantiation as well as the eventual reseeding from
get_random_bytes() in aforementioned drbg_async_seed(), if any. Moreover,
it knows about the get_random_bytes() initialization state by the time the
seed data had been obtained from it: the new_seed_state argument introduced
with the previous patch would get set to DRBG_SEED_STATE_PARTIAL in case
get_random_bytes() had not been fully initialized yet and to
DRBG_SEED_STATE_FULL otherwise. Thus, __drbg_seed() provides a convenient
alternative for managing that ->reseed_threshold lowering and restoring at
a central place.

Move all ->reseed_threshold adjustment code from drbg_prepare_hrng() and
drbg_async_seed() respectively to __drbg_seed(). Make __drbg_seed()
lower the ->reseed_threshold to 50 in case its new_seed_state argument
equals DRBG_SEED_STATE_PARTIAL and let it restore the original value
otherwise.

There is no change in behaviour.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drbg - track whether DRBG was seeded with !rng_is_initialized()

Currently, the DRBG implementation schedules asynchronous works from
random_ready_callbacks for reseeding the DRBG instances with output from
get_random_bytes() once the latter has sufficient entropy available.

However, as the get_random_bytes() initialization state can get queried by
means of rng_is_initialized() now, there is no real need for this
asynchronous reseeding logic anymore and it's better to keep things simple
by doing it synchronously when needed instead, i.e. from drbg_generate()
once rng_is_initialized() has flipped to true.

Of course, for this to work, drbg_generate() would need some means by which
it can tell whether or not rng_is_initialized() has flipped to true since
the last seeding from get_random_bytes(). Or equivalently, whether or not
the last seed from get_random_bytes() has happened when
rng_is_initialized() was still evaluating to false.

As it currently stands, enum drbg_seed_state allows for the representation
of two different DRBG seeding states: DRBG_SEED_STATE_UNSEEDED and
DRBG_SEED_STATE_FULL. The former makes drbg_generate() to invoke a full
reseeding operation involving both, the rather expensive jitterentropy as
well as the get_random_bytes() randomness sources. The DRBG_SEED_STATE_FULL
state on the other hand implies that no reseeding at all is required for a
!->pr DRBG variant.

Introduce the new DRBG_SEED_STATE_PARTIAL state to enum drbg_seed_state for
representing the condition that a DRBG was being seeded when
rng_is_initialized() had still been false. In particular, this new state
implies that
- the given DRBG instance has been fully seeded from the jitterentropy
  source (if enabled)
- and drbg_generate() is supposed to reseed from get_random_bytes()
  *only* once rng_is_initialized() turns to true.

Up to now, the __drbg_seed() helper used to set the given DRBG instance's
->seeded state to constant DRBG_SEED_STATE_FULL. Introduce a new argument
allowing for the specification of the to be written ->seeded value instead.
Make the first of its two callers, drbg_seed(), determine the appropriate
value based on rng_is_initialized(). The remaining caller,
drbg_async_seed(), is known to get invoked only once rng_is_initialized()
is true, hence let it pass constant DRBG_SEED_STATE_FULL for the new
argument to __drbg_seed().

There is no change in behaviour, except for that the pr_devel() in
drbg_generate() would now report "unseeded" for ->pr DRBG instances which
had last been seeded when rng_is_initialized() was still evaluating to
false.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drbg - prepare for more fine-grained tracking of seeding state

There are two different randomness sources the DRBGs are getting seeded
from, namely the jitterentropy source (if enabled) and get_random_bytes().
At initial DRBG seeding time during boot, the latter might not have
collected sufficient entropy for seeding itself yet and thus, the DRBG
implementation schedules a reseed work from a random_ready_callback once
that has happened. This is particularly important for the !->pr DRBG
instances, for which (almost) no further reseeds are getting triggered
during their lifetime.

Because collecting data from the jitterentropy source is a rather expensive
operation, the aforementioned asynchronously scheduled reseed work
restricts itself to get_random_bytes() only. That is, it in some sense
amends the initial DRBG seed derived from jitterentropy output at full
(estimated) entropy with fresh randomness obtained from get_random_bytes()
once that has been seeded with sufficient entropy itself.

With the advent of rng_is_initialized(), there is no real need for doing
the reseed operation from an asynchronously scheduled work anymore and a
subsequent patch will make it synchronous by moving it next to related
logic already present in drbg_generate().

However, for tracking whether a full reseed including the jitterentropy
source is required or a "partial" reseed involving only get_random_bytes()
would be sufficient already, the boolean struct drbg_state's ->seeded
member must become a tristate value.

Prepare for this by introducing the new enum drbg_seed_state and change
struct drbg_state's ->seeded member's type from bool to that type.

For facilitating review, enum drbg_seed_state is made to only contain
two members corresponding to the former ->seeded values of false and true
resp. at this point: DRBG_SEED_STATE_UNSEEDED and DRBG_SEED_STATE_FULL. A
third one for tracking the intermediate state of "seeded from jitterentropy
only" will be introduced with a subsequent patch.

There is no change in behaviour at this point.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - no need to initialise statics to 0

Static variables do not need to be initialized to 0.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccree - remove redundant 'flush_workqueue()' calls

'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.

Remove the redundant 'flush_workqueue()' calls.

This was generated with coccinelle:

@@
expression E;
@@
-  flush_workqueue(E);
destroy_workqueue(E);

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: octeontx2 - use swap() to make code cleaner

Fix the following coccicheck REVIEW:
./drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c:1688:16-17 use swap() to make code cleaner

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: testmgr - Fix wrong test case of RSA

According to the BER encoding rules, integer value should be encoded
as two's complement, and if the highest bit of a positive integer
is 1, should add a leading zero-octet.

The kernel's built-in RSA algorithm cannot recognize negative numbers
when parsing keys, so it can pass this test case.

Export the key to file and run the following command to verify the
fix result:

  openssl asn1parse -inform DER -in /path/to/key/file

Signed-off-by: Lei He <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qce - fix uaf on qce_skcipher_register_one

Pointer alg points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing alg before free tmpl.

Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qce - fix uaf on qce_ahash_register_one

Pointer base points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing base before free tmpl.

Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qce - fix uaf on qce_aead_register_one

Pointer alg points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing alg before free tmpl.

Fixes: 9363efb4 ("crypto: qce - Add support for AEAD algorithms")
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/hpre - use swap() to make code cleaner

Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MAINTAINERS: rectify entry for INTEL KEEM BAY OCS ECC CRYPTO DRIVER

Commit c9f608c38009 ("crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC
Driver") only adds drivers/crypto/keembay/keembay-ocs-ecc.c, but adds a
file entry drivers/crypto/keembay/ocs-ecc-curve-defs.h in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns warns:

  warning: no file matches  F:  drivers/crypto/keembay/ocs-ecc-curve-defs.h

Assuming that this header is obsolete and will not be included in the
repository, remove the unneeded file entry from MAINTAINERS.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: keembay-ocs-ecc - Fix error return code in kmb_ocs_ecc_probe()

Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: c9f608c38009 ("crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC Driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - replace this_cpu_ptr with raw_cpu_ptr

When enable the kernel debug config, there is below calltrace detected:
BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/339
caller is debug_smp_processor_id+0x20/0x30
CPU: 9 PID: 339 Comm: cryptomgr_test Not tainted 5.10.63-yocto-standard #1
Hardware name: NXP Layerscape LX2160ARDB (DT)
Call trace:
 dump_backtrace+0x0/0x1a0
 show_stack+0x24/0x30
 dump_stack+0xf0/0x13c
 check_preemption_disabled+0x100/0x110
 debug_smp_processor_id+0x20/0x30
 dpaa2_caam_enqueue+0x10c/0x25c
 ......
 cryptomgr_test+0x38/0x60
 kthread+0x158/0x164
 ret_from_fork+0x10/0x38
According to the comment in commit ac5d15b4519f("crypto: caam/qi2
 - use affine DPIOs "), because preemption is no longer disabled
while trying to enqueue an FQID, it might be possible to run the
enqueue on a different CPU(due to migration, when in process context),
however this wouldn't be a functionality issue. But there will be
above calltrace when enable kernel debug config. So, replace this_cpu_ptr
with raw_cpu_ptr to avoid above call trace.

Fixes: ac5d15b4519f ("crypto: caam/qi2 - use affine DPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: cavium - Check health status while reading random data

This RNG device is present on Marvell OcteonTx2 silicons as well and
also provides entropy health status.

HW continuously checks health condition of entropy and reports
faults. Fault is in terms of co-processor cycles since last fault
detected. This doesn't get cleared and only updated when new fault
is detected. Also there are chances of detecting false positives.
So to detect a entropy failure SW has to check if failures are
persistent ie cycles elapsed is frequently updated by HW.

This patch adds support to detect health failures using below algo.
1. Consider any fault detected before 10ms as a false positive and ignore.
   10ms is chosen randomly, no significance.
2. Upon first failure detection make a note of cycles elapsed and when this
   error happened in realtime (cntvct).
3. Upon subsequent failure, check if this is new or a old one by comparing
   current cycles with the ones since last failure. cycles or time since
   last failure is calculated using cycles and time info captured at (2).

HEALTH_CHECK status register is not available to VF, hence had to map
PF registers. Also since cycles are in terms of co-processor cycles,
had to retrieve co-processor clock rate from RST device.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: atmel-aes - Reestablish the correct tfm context at dequeue

In case there were more requests from different tfms in the crypto
queue, only the context of the last initialized tfm was considered.

Fixes: ec2088b66f7a ("crypto: atmel-aes - Allocate aes dev at tfm init time")
Reported-by: Wolfgang Ocker <weo@reccoware.de>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Linux 5.16-rc1

kconfig: Add support for -Wimplicit-fallthrough

Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.

The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.

Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.

This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)

Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8
Link: https://bugs.llvm.org/show_bug.cgi?id=51094
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'xfs-5.16-merge-5' of git://git./fs/xfs/xfs-linux

Pull xfs cleanups from Darrick Wong:
 "The most 'exciting' aspect of this branch is that the xfsprogs
  maintainer and I have worked through the last of the code
  discrepancies between kernel and userspace libxfs such that there are
  no code differences between the two except for #includes.

  IOWs, diff suffices to demonstrate that the userspace tools behave the
  same as the kernel, and kernel-only bits are clearly marked in the
  /kernel/ source code instead of just the userspace source.

  Summary:

   - Clean up open-coded swap() calls.

   - A little bit of #ifdef golf to complete the reunification of the
     kernel and userspace libxfs source code"

* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: sync xfs_btree_split macros with userspace libxfs
  xfs: #ifdef out perag code for userspace
  xfs: use swap() to make dabtree code cleaner

Merge tag 'for-5.16/parisc-3' of git://git./linux/kernel/git/deller/parisc-linux

Pull more parisc fixes from Helge Deller:
 "Fix a build error in stracktrace.c, fix resolving of addresses to
  function names in backtraces, fix single-stepping in assembly code and
  flush userspace pte's when using set_pte_at()"

* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/entry: fix trace test in syscall exit path
  parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
  parisc: Fix implicit declaration of function '__kernel_text_address'
  parisc: Fix backtrace to always include init funtion names

Merge tag 'sh-for-5.16' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker.

* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
  sh: pgtable-3level: Fix cast to pointer from integer of different size
  sh: fix READ/WRITE redefinition warnings
  sh: define __BIG_ENDIAN for math-emu
  sh: math-emu: drop unused functions
  sh: fix kconfig unmet dependency warning for FRAME_POINTER
  sh: Cleanup about SPARSE_IRQ
  sh: kdump: add some attribute to function
  maple: fix wrong return value of maple_bus_init().
  sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
  sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
  sh: boards: Fix the cacography in irq.c
  sh: check return code of request_irq
  sh: fix trivial misannotations

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - Fix early_iounmap

 - Drop cc-option fallbacks for architecture selection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9156/1: drop cc-option fallbacks for architecture selection
  ARM: 9155/1: fix early early_iounmap()

Merge tag 'devicetree-fixes-for-5.16-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Two fixes due to DT node name changes on Arm, Ltd. boards

 - Treewide rename of Ingenic CGU headers

 - Update ST email addresses

 - Remove Netlogic DT bindings

 - Dropping few more cases of redundant 'maxItems' in schemas

 - Convert toshiba,tc358767 bridge binding to schema

* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: watchdog: sunxi: fix error in schema
  bindings: media: venus: Drop redundant maxItems for power-domain-names
  dt-bindings: Remove Netlogic bindings
  clk: versatile: clk-icst: Ensure clock names are unique
  of: Support using 'mask' in making device bus id
  dt-bindings: treewide: Update @st.com email address to @foss.st.com
  dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
  dt-bindings: media: Update maintainers for st,stm32-cec.yaml
  dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
  dt-bindings: timer: Update maintainers for st,stm32-timer
  dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
  dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
  dt-bindings: Rename Ingenic CGU headers to ingenic,*.h

Merge tag 'timers-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
 "A single fix for POSIX CPU timers to address a problem where POSIX CPU
  timer delivery stops working for a new child task because
  copy_process() copies state information which is only valid for the
  parent task"

* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()

Merge tag 'irq-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem

  Core code:

   - A regression fix for the Open Firmware interrupt mapping code where
     a interrupt controller property in a node caused a map property in
     the same node to be ignored.

  Interrupt chip drivers:

   - Workaround a limitation in SiFive PLIC interrupt chip which
     silently ignores an EOI when the interrupt line is masked.

   - Provide the missing mask/unmask implementation for the CSKY MP
     interrupt controller.

  PCI/MSI:

   - Prevent a use after free when PCI/MSI interrupts are released by
     destroying the sysfs entries before freeing the memory which is
     accessed in the sysfs show() function.

   - Implement a mask quirk for the Nvidia ION AHCI chip which does not
     advertise masking capability despite implementing it. Even worse
     the chip comes out of reset with all MSI entries masked, which due
     to the missing masking capability never get unmasked.

   - Move the check which prevents accessing the MSI[X] masking for XEN
     back into the low level accessors. The recent consolidation missed
     that these accessors can be invoked from places which do not have
     that check which broke XEN. Move them back to he original place
     instead of sprinkling tons of these checks all over the code"

* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  of/irq: Don't ignore interrupt-controller when interrupt-map failed
  irqchip/sifive-plic: Fixup EOI failed when masked
  irqchip/csky-mpintc: Fixup mask/unmask implementation
  PCI/MSI: Destroy sysfs before freeing entries
  PCI: Add MSI masking quirk for Nvidia ION AHCI
  PCI/MSI: Deal with devices lying about their MSI mask capability
  PCI/MSI: Move non-mask check back into low level accessors

Merge tag 'locking-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip

Pull x86 static call update from Thomas Gleixner:
 "A single fix for static calls to make the trampoline patching more
  robust by placing explicit signature bytes after the call trampoline
  to prevent patching random other jumps like the CFI jump table
  entries"

* tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  static_call,x86: Robustify trampoline patching

Merge tag 'sched_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

 - Avoid touching ~100 config files in order to be able to select the
   preemption model

 - clear cluster CPU masks too, on the CPU unplug path

 - prevent use-after-free in cfs

 - Prevent a race condition when updating CPU cache domains

 - Factor out common shared part of smp_prepare_cpus() into a common
   helper which can be called by both baremetal and Xen, in order to fix
   a booting of Xen PV guests

* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  preempt: Restore preemption model selection configs
  arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
  sched/fair: Prevent dead task groups from regaining cfs_rq's
  sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
  x86/smp: Factor out parts of native_smp_prepare_cpus()

Merge tag 'perf_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

 - Prevent unintentional page sharing by checking whether a page
   reference to a PMU samples page has been acquired properly before
   that

 - Make sure the LBR_SELECT MSR is saved/restored too

 - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any
   residual data left

* tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Avoid put_page() when GUP fails
  perf/x86/vlbr: Add c->flags to vlbr event constraints
  perf/x86/lbr: Reset LBR_SELECT during vlbr reset

Merge tag 'x86_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Add the model number of a new, Raptor Lake CPU, to intel-family.h

 - Do not log spurious corrected MCEs on SKL too, due to an erratum

 - Clarify the path of paravirt ops patches upstream

 - Add an optimization to avoid writing out AMX components to sigframes
   when former are in init state

* tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add Raptor Lake to Intel family
  x86/mce: Add errata workaround for Skylake SKX37
  MAINTAINERS: Add some information to PARAVIRT_OPS entry
  x86/fpu: Optimize out sigframe xfeatures when in init state

Merge tag 'perf-tools-for-v5.16-2021-11-13' of git://git./linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:
 "Hardware tracing:

   - ARM:
      * Print the size of the buffer size consistently in hexadecimal in
        ARM Coresight.
      * Add Coresight snapshot mode support.
      * Update --switch-events docs in 'perf record'.
      * Support hardware-based PID tracing.
      * Track task context switch for cpu-mode events.

   - Vendor events:
      * Add metric events JSON file for power10 platform

  perf test:

   - Get 'perf test' unit tests closer to kunit.

   - Topology tests improvements.

   - Remove bashisms from some tests.

  perf bench:

   - Fix memory leak of perf_cpu_map__new() in the futex benchmarks.

  libbpf:

   - Add some more weak libbpf functions o allow building with the
     libbpf versions, old ones, present in distros.

  libbeauty:

   - Translate [gs]setsockopt 'level' argument integer values to
     strings.

  tools headers UAPI:

   - Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files
     with the kernel sources.

  Documentation:

   - Add documentation to 'struct symbol'.

   - Synchronize the definition of enum perf_hw_id with code in
     tools/perf/design.txt"

* tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
  perf tests: Remove bash constructs from stat_all_pmu.sh
  perf tests: Remove bash construct from record+zstd_comp_decomp.sh
  perf test: Remove bash construct from stat_bpf_counters.sh test
  perf bench futex: Fix memory leak of perf_cpu_map__new()
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync sound/asound.h with the kernel sources
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools headers UAPI: Sync arch prctl headers with the kernel sources
  perf tools: Add more weak libbpf functions
  perf bpf: Avoid memory leak from perf_env__insert_btf()
  perf symbols: Factor out annotation init/exit
  perf symbols: Bit pack to save a byte
  perf symbols: Add documentation to 'struct symbol'
  tools headers UAPI: Sync files changed by new futex_waitv syscall
  perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning
  perf arm-spe: Support hardware-based PID tracing
  perf arm-spe: Save context ID in record
  perf arm-spe: Update --switch-events docs in 'perf record'
  perf arm-spe: Track task context switch for cpu-mode events
  ...

Merge tag 'irqchip-fixes-5.16-1' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

  - Address an issue with the SiFive PLIC being unable to EOI
    a masked interrupt

  - Move the disable/enable methods in the CSky mpintc to
    mask/unmask

  - Fix a regression in the OF irq code where an interrupt-controller
    property in the same node as an interrupt-map property would get
    ignored

Link: https://lore.kernel.org/all/20211112173459.4015233-1-maz@kernel.org

Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux

Pull zstd update from Nick Terrell:
 "Update to zstd-1.4.10.

  Add myself as the maintainer of zstd and update the zstd version in
  the kernel, which is now 4 years out of date, to a much more recent
  zstd release. This includes bug fixes, much more extensive fuzzing,
  and performance improvements. And generates the kernel zstd
  automatically from upstream zstd, so it is easier to keep the zstd
  verison up to date, and we don't fall so far out of date again.

  This includes 5 commits that update the zstd library version:

   - Adds a new kernel-style wrapper around zstd.

     This wrapper API is functionally equivalent to the subset of the
     current zstd API that is currently used. The wrapper API changes to
     be kernel style so that the symbols don't collide with zstd's
     symbols. The update to zstd-1.4.10 maintains the same API and
     preserves the semantics, so that none of the callers need to be
     updated. All callers are updated in the commit, because there are
     zero functional changes.

   - Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
     depend on the layout of `lib/zstd/` to include every source file.
     This allows the next patch to be automatically generated.

   - Imports the zstd-1.4.10 source code. This commit is automatically
     generated from upstream zstd (https://github.com/facebook/zstd).

   - Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.

   - Fixes a newly added build warning for clang.

  The discussion around this patchset has been pretty long, so I've
  included a FAQ-style summary of the history of the patchset, and why
  we are taking this approach.

  Why do we need to update?
  -------------------------

  The zstd version in the kernel is based off of zstd-1.3.1, which is
  was released August 20, 2017. Since then zstd has seen many bug fixes
  and performance improvements. And, importantly, upstream zstd is
  continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
  older versions. So the only way to sanely get these fixes is to keep
  up to date with upstream zstd.

  There are no known security issues that affect the kernel, but we need
  to be able to update in case there are. And while there are no known
  security issues, there are relevant bug fixes. For example the problem
  with large kernel decompression has been fixed upstream for over 2
  years [1]

  Additionally the performance improvements for kernel use cases are
  significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:

   - BtrFS zstd compression at levels 1 and 3 is 5% faster

   - BtrFS zstd decompression+read is 15% faster

   - SquashFS zstd decompression+read is 15% faster

   - F2FS zstd compression+write at level 3 is 8% faster

   - F2FS zstd decompression+read is 20% faster

   - ZRAM decompression+read is 30% faster

   - Kernel zstd decompression is 35% faster

   - Initramfs zstd decompression+build is 5% faster

  On top of this, there are significant performance improvements coming
  down the line in the next zstd release, and the new automated update
  patch generation will allow us to pull them easily.

  How is the update patch generated?
  ----------------------------------

  The first two patches are preparation for updating the zstd version.
  Then the 3rd patch in the series imports upstream zstd into the
  kernel. This patch is automatically generated from upstream. A script
  makes the necessary changes and imports it into the kernel. The
  changes are:

   - Replace all libc dependencies with kernel replacements and rewrite
     includes.

   - Remove unncessary portability macros like: #if defined(_MSC_VER).

   - Use the kernel xxhash instead of bundling it.

  This automation gets tested every commit by upstream's continuous
  integration. When we cut a new zstd release, we will submit a patch to
  the kernel to update the zstd version in the kernel.

  The automated process makes it easy to keep the kernel version of zstd
  up to date. The current zstd in the kernel shares the guts of the
  code, but has a lot of API and minor changes to work in the kernel.
  This is because at the time upstream zstd was not ready to be used in
  the kernel envrionment as-is. But, since then upstream zstd has
  evolved to support being used in the kernel as-is.

  Why are we updating in one big patch?
  -------------------------------------

  The 3rd patch in the series is very large. This is because it is
  restructuring the code, so it both deletes the existing zstd, and
  re-adds the new structure. Future updates will be directly
  proportional to the changes in upstream zstd since the last import.
  They will admittidly be large, as zstd is an actively developed
  project, and has hundreds of commits between every release. However,
  there is no other great alternative.

  One option ruled out is to replay every upstream zstd commit. This is
  not feasible for several reasons:

   - There are over 3500 upstream commits since the zstd version in the
     kernel.

   - The automation to automatically generate the kernel update was only
     added recently, so older commits cannot easily be imported.

   - Not every upstream zstd commit builds.

   - Only zstd releases are "supported", and individual commits may have
     bugs that were fixed before a release.

  Another option to reduce the patch size would be to first reorganize
  to the new file structure, and then apply the patch. However, the
  current kernel zstd is formatted with clang-format to be more
  "kernel-like". But, the new method imports zstd as-is, without
  additional formatting, to allow for closer correlation with upstream,
  and easier debugging. So the patch wouldn't be any smaller.

  It also doesn't make sense to import upstream zstd commit by commit
  going forward. Upstream zstd doesn't support production use cases
  running of the development branch. We have a lot of post-commit
  fuzzing that catches many bugs, so indiviudal commits may be buggy,
  but fixed before a release. So going forward, I intend to import every
  (important) zstd release into the Kernel.

  So, while it isn't ideal, updating in one big patch is the only patch
  I see forward.

  Who is responsible for this code?
  ---------------------------------

  I am. This patchset adds me as the maintainer for zstd. Previously,
  there was no tree for zstd patches. Because of that, there were
  several patches that either got ignored, or took a long time to merge,
  since it wasn't clear which tree should pick them up. I'm officially
  stepping up as maintainer, and setting up my tree as the path through
  which zstd patches get merged. I'll make sure that patches to the
  kernel zstd get ported upstream, so they aren't erased when the next
  version update happens.

  How is this code tested?
  ------------------------

  I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
  Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
  aarch64. I checked both performance and correctness.

  Also, thanks to many people in the community who have tested these
  patches locally.

  Lastly, this code will bake in linux-next before being merged into
  v5.16.

  Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
  ------------------------------------------------------------

  This patchset has been outstanding since 2020, and zstd-1.4.10 was the
  latest release when it was created. Since the update patch is
  automatically generated from upstream, I could generate it from
  zstd-1.5.0.

  However, there were some large stack usage regressions in zstd-1.5.0,
  and are only fixed in the latest development branch. And the latest
  development branch contains some new code that needs to bake in the
  fuzzer before I would feel comfortable releasing to the kernel.

  Once this patchset has been merged, and we've released zstd-1.5.1, we
  can update the kernel to zstd-1.5.1, and exercise the update process.

  You may notice that zstd-1.4.10 doesn't exist upstream. This release
  is an artifical release based off of zstd-1.4.9, with some fixes for
  the kernel backported from the development branch. I will tag the
  zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
  is running a known version of zstd that can be debugged upstream.

  Why was a wrapper API added?
  ----------------------------

  The first versions of this patchset migrated the kernel to the
  upstream zstd API. It first added a shim API that supported the new
  upstream API with the old code, then updated callers to use the new
  shim API, then transitioned to the new code and deleted the shim API.
  However, Cristoph Hellwig suggested that we transition to a kernel
  style API, and hide zstd's upstream API behind that. This is because
  zstd's upstream API is supports many other use cases, and does not
  follow the kernel style guide, while the kernel API is focused on the
  kernel's use cases, and follows the kernel style guide.

  Where is the previous discussion?
  ---------------------------------

  Links for the discussions of the previous versions of the patch set
  below. The largest changes in the design of the patchset are driven by
  the discussions in v11, v5, and v1. Sorry for the mix of links, I
  couldn't find most of the the threads on lkml.org"

Link: https://lkml.org/lkml/2020/9/29/27
Link: https://www.spinics.net/lists/linux-crypto/msg58189.html
Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/
Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/
Link: https://lkml.org/lkml/2020/12/3/1195
Link: https://lkml.org/lkml/2020/12/2/1245
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html
Link: https://lkml.org/lkml/2020/9/23/1074
Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
* tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux:
  lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical
  MAINTAINERS: Add maintainer entry for zstd
  lib: zstd: Upgrade to latest upstream zstd version 1.4.10
  lib: zstd: Add decompress_sources.h for decompress_unzstd
  lib: zstd: Add kernel-specific API

Merge tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux

Pull virtio-mem update from David Hildenbrand:
 "Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem,
  now that "accidential" access to logically unplugged memory inside
  added Linux memory blocks is no longer possible, because we:

   - Removed /dev/kmem in commit bbcd53c96071 ("drivers/char: remove
     /dev/kmem for good")

   - Disallowed access to virtio-mem device memory via /dev/mem in
     commit 2128f4e21aa ("virtio-mem: disallow mapping virtio-mem memory
     via /dev/mem")

   - Sanitized access to virtio-mem device memory via /proc/kcore in
     commit 0daa322b8ff9 ("fs/proc/kcore: don't read offline sections,
     logically offline pages and hwpoisoned pages")

   - Sanitized access to virtio-mem device memory via /proc/vmcore in
     commit ce2814622e84 ("virtio-mem: kdump mode to sanitize
     /proc/vmcore access")

  The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be
  required by some hypervisors implementing virtio-mem in the near
  future, so let's support it now that we safely can"

* tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux:
  virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE

perf tests: Remove bash constructs from stat_all_pmu.sh

The tests were passing but without testing and were printing the
following:

  $ ./perf test -v 90
  90: perf all PMU test                                               :
  --- start ---
  test child forked, pid 51650
  Testing cpu/branch-instructions/
  ./tests/shell/stat_all_pmu.sh: 10: [:
   Performance counter stats for 'true':

             137,307      cpu/branch-instructions/

         0.001686672 seconds time elapsed

         0.001376000 seconds user
         0.000000000 seconds sys: unexpected operator

Changing the regexes to a grep works in sh and prints this:

  $ ./perf test -v 90
  90: perf all PMU test                                               :
  --- start ---
  test child forked, pid 60186
  [...]
  Testing tlb_flush.stlb_any
  test child finished with 0
  ---- end ----
  perf all PMU test: Ok

Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Remove bash construct from record+zstd_comp_decomp.sh

Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:

  $ ./perf test -v 85
  85: Zstd perf.data compression/decompression                        :
  --- start ---
  test child forked, pid 50643
  Collecting compressed record file:
  ./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found

Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Remove bash construct from stat_bpf_counters.sh test

Currently the test skips with an error because == only works in bash:

  $ ./perf test 91 -v
  Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
  91: perf stat --bpf-counters test                                   :
  --- start ---
  test child forked, pid 44586
  ./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator
  test child finished with -2
  ---- end ----
  perf stat --bpf-counters test: Skip

Changing == to = does the same thing, but doesn't result in an error:

  ./perf test 91 -v
  Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
  91: perf stat --bpf-counters test                                   :
  --- start ---
  test child forked, pid 45833
  Skipping: --bpf-counters not supported
    Error: unknown option `bpf-counters'
  [...]
  test child finished with -2
  ---- end ----
  perf stat --bpf-counters test: Skip

Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bench futex: Fix memory leak of perf_cpu_map__new()

ASan reports memory leaks while running:

  $ sudo ./perf bench futex all

The leaks are caused by perf_cpu_map__new not being freed.
This patch adds the missing perf_cpu_map__put since it calls
cpu_map_delete implicitly.

Fixes: 9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools arch x86: Sync the msr-index.h copy with the kernel sources

To pick up the changes in:

  dae1bd58389615d4 ("x86/msr-index: Add MSRs for XFD")

Addressing these tools/perf build warnings:

    diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
    Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'

That makes the beautification scripts to pick some new entries:

  $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
  --- tools/arch/x86/include/asm/msr-index.h 2021-07-15 16:17:01.819817827 -0300
  +++ arch/x86/include/asm/msr-index.h 2021-11-06 15:49:33.738517311 -0300
  @@ -625,6 +625,8 @@

   #define MSR_IA32_BNDCFGS_RSVD 0x00000ffc

  +#define MSR_IA32_XFD 0x000001c4
  +#define MSR_IA32_XFD_ERR 0x000001c5
   #define MSR_IA32_XSS 0x00000da0

   #define MSR_IA32_APICBASE 0x0000001b
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/after
  $ diff -u /tmp/before /tmp/after
  --- /tmp/before 2021-11-13 11:10:39.964201505 -0300
  +++ /tmp/after 2021-11-13 11:10:47.902410873 -0300
  @@ -93,6 +93,8 @@
    [0x000001b0] = "IA32_ENERGY_PERF_BIAS",
    [0x000001b1] = "IA32_PACKAGE_THERM_STATUS",
    [0x000001b2] = "IA32_PACKAGE_THERM_INTERRUPT",
  + [0x000001c4] = "IA32_XFD",
  + [0x000001c5] = "IA32_XFD_ERR",
    [0x000001c8] = "LBR_SELECT",
    [0x000001c9] = "LBR_TOS",
    [0x000001d9] = "IA32_DEBUGCTLMSR",
  $

And this gets rebuilt:

  CC       /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
  INSTALL  trace_plugins
  LD       /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
  LD       /tmp/build/perf/trace/beauty/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/perf

Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written with:

  # perf trace -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR"
  ^C#
  #

If we use -v (verbose mode) we can see what it does behind the scenes:

  # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR"
  <SNIP>
  New filter for msr:read_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781)
  New filter for msr:write_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781)
  <SNIP>
  ^C#

Example with a frequent msr:

  # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
  Using CPUID AuthenticAMD-25-21-0
  0x48
  New filter for msr:read_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564)
  0x48
  New filter for msr:write_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564)
  mmap size 528384B
  Looking at the vmlinux_path (8 entries long)
  symsrc__init: build id mismatch for vmlinux.
  Using /proc/kcore for kernel data
  Using /proc/kallsyms for symbols
       0.000 pipewire/2479 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
                                         do_trace_write_msr ([kernel.kallsyms])
                                         do_trace_write_msr ([kernel.kallsyms])
                                         __switch_to_xtra ([kernel.kallsyms])
                                         __switch_to ([kernel.kallsyms])
                                         __schedule ([kernel.kallsyms])
                                         schedule ([kernel.kallsyms])
                                         schedule_hrtimeout_range_clock ([kernel.kallsyms])
                                         do_epoll_wait ([kernel.kallsyms])
                                         __x64_sys_epoll_wait ([kernel.kallsyms])
                                         do_syscall_64 ([kernel.kallsyms])
                                         entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
                                         epoll_wait (/usr/lib64/libc-2.33.so)
                                         [0x76c4] (/usr/lib64/spa-0.2/support/libspa-support.so)
                                         [0x4cf0] (/usr/lib64/spa-0.2/support/libspa-support.so)
       0.027 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
                                         do_trace_write_msr ([kernel.kallsyms])
                                         do_trace_write_msr ([kernel.kallsyms])
                                         __switch_to_xtra ([kernel.kallsyms])
                                         __switch_to ([kernel.kallsyms])
                                         __schedule ([kernel.kallsyms])
                                         schedule_idle ([kernel.kallsyms])
                                         do_idle ([kernel.kallsyms])
                                         cpu_startup_entry ([kernel.kallsyms])
                                         start_kernel ([kernel.kallsyms])
                                         secondary_startup_64_no_verify ([kernel.kallsyms])
  #

Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YY%2FJdb6on7swsn+C@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync drm/i915_drm.h with the kernel sources

To pick up the changes in:

  e5e32171a2cf1e43 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
  9409eb35942713d0 ("drm/i915: Expose logical engine instance to user")
  ea673f17ab763879 ("drm/i915/uapi: Add comment clarifying purpose of I915_TILING_* values")
  d3ac8d42168a9be7 ("drm/i915/pxp: interfaces for using protected objects")
  cbbd3764b2399ad8 ("drm/i915/pxp: Create the arbitrary session after boot")

That don't add any new ioctl, so no changes in tooling.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Huang, Sean Z <sean.z.huang@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync sound/asound.h with the kernel sources

To pick up the changes in:

  5aec579e08e4f2be ("ALSA: uapi: Fix a C++ style comment in asound.h")

That is just changing a // style comment to /* */.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
  diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h

Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/prctl.h with the kernel sources

To pick the changes in:

  61bc346ce64a3864 ("uapi/linux/prctl: provide macro definitions for the PR_SCHED_CORE type argument")

That don't result in any changes in tooling:

  $ tools/perf/trace/beauty/prctl_option.sh > before
  $ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
  $ tools/perf/trace/beauty/prctl_option.sh > after
  $ diff -u before after
  $

Just silences this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
  diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h

Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync arch prctl headers with the kernel sources

To pick the changes in this cset:

  db8268df0983adc2 ("x86/arch_prctl: Add controls for dynamic XSTATE components")

This picks these new prctls:

  $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before
  $ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h
  $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after
  $ diff -u /tmp/before /tmp/after
  --- /tmp/before 2021-11-13 10:42:52.787308809 -0300
  +++ /tmp/after 2021-11-13 10:43:02.295558837 -0300
  @@ -6,6 +6,9 @@
    [0x1004 - 0x1001]= "GET_GS",
    [0x1011 - 0x1001]= "GET_CPUID",
    [0x1012 - 0x1001]= "SET_CPUID",
  + [0x1021 - 0x1001]= "GET_XCOMP_SUPP",
  + [0x1022 - 0x1001]= "GET_XCOMP_PERM",
  + [0x1023 - 0x1001]= "REQ_XCOMP_PERM",
   };

   #define x86_arch_prctl_codes_2_offset 0x2001
  $

With this 'perf trace' can translate those numbers into strings and use
the strings in filter expressions:

  # perf trace -e prctl
       0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5)     = 0
       0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580)     = 0
       5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0
       5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0
      24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0
      24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0
     670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0
     670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0
  ^C#

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h'
  diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h

Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YY%2FER104k852WOTK@kernel.org/T/#u
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add more weak libbpf functions

We hit the window where perf uses libbpf functions, that did not make it
to the official libbpf release yet and it's breaking perf build with
dynamicly linked libbpf.

Fixing this by providing the new interface as weak functions which calls
the original libbpf functions. Fortunatelly the changes were just
renames.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211109140707.1689940-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf: Avoid memory leak from perf_env__insert_btf()

perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.

v2. Adds a return -1 when the insertion error occurs in
    perf_env__fetch_btf. This doesn't affect anything as the result is
    never checked.

Fixes: 3792cb2ff43b1b19 ("perf bpf: Save BTF in a rbtree in perf_env")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211112074525.121633-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Factor out annotation init/exit

The exit function fixes a memory leak with the src field as detected by
leak sanitizer. An example of which is:

Indirect leak of 25133184 byte(s) in 207 object(s) allocated from:
    #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154
    #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803
    #2 0x55defe6397e4 in symbol__hists util/annotate.c:952
    #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968
    #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119
    #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182
    #6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236
    #7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315
    #8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473
    #9 0x55defe731e38 in machines__deliver_event util/session.c:1510
    #10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590
    #11 0x55defe72951e in ordered_events__deliver_event util/session.c:183
    #12 0x55defe740082 in do_flush util/ordered-events.c:244
    #13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323
    #14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341
    #15 0x55defe73837f in __perf_session__process_events util/session.c:2390
    #16 0x55defe7385ff in perf_session__process_events util/session.c:2420
    ...

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Bit pack to save a byte

Use a bit field alongside the earlier bit fields.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Add documentation to 'struct symbol'

Refactor some existing comments and then infer the rest.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync files changed by new futex_waitv syscall

To pick the changes in these csets:

  039c0ec9bb77446d ("futex,x86: Wire up sys_futex_waitv()")
  bf69bad38cf63d98 ("futex: Implement sys_futex_waitv()")

That add support for this new syscall in tools such as 'perf trace'.

For instance, this is now possible:

  # perf trace -e futex_waitv
  ^C#
  # perf trace -v -e futex_waitv
  Using CPUID AuthenticAMD-25-21-0
  event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
  mmap size 528384B
  ^C#
  # perf trace -v -e futex* --max-events 10
  Using CPUID AuthenticAMD-25-21-0
  event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 202 || id == 449)
  mmap size 528384B
           ? (         ): Timer/219310  ... [continued]: futex())                                            = -1 ETIMEDOUT (Connection timed out)
       0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
       0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.088 (         ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
       0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1)     = 1
       0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1)     = 1
       0.088 ( 0.089 ms): Timer/219310  ... [continued]: futex())                                            = 0
       0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.181 (         ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
  #

That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.

  $ grep futex_waitv tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
  449 common futex_waitv sys_futex_waitv
  $

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
  diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
  Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl

Cc: André Almeida <andrealmeid@collabora.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning

Address following coccicheck warnings:

  ./tools/perf/tests/bpf.c:316:22-23: WARNING: Use ARRAY_SIZE.

Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: kernel@vivo.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211108070801.5540-1-guozhengkui@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf arm-spe: Support hardware-based PID tracing

If ARM SPE traces contains CONTEXT packets with TID info, use these
values for tracking the TID of samples. Otherwise fall back to using
context switch events and display a message warning to the user of
possible timing inaccuracies [1].

[1] https://lore.kernel.org/lkml/f877cfa6-9b25-6445-3806-ca44a4042eaf@arm.com/

Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211111133625.193568-5-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf arm-spe: Save context ID in record

This patch is to save context ID in record, this will be used to set TID
for samples.

Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211111133625.193568-4-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf arm-spe: Update --switch-events docs in 'perf record'

Update 'perf record' docs and ARM SPE recording options so that they are
consistent. This includes supporting the --no-switch-events flag in ARM
SPE as well.

Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211111133625.193568-3-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf arm-spe: Track task context switch for cpu-mode events

When perf report synthesize events from ARM SPE data, it refers to
current cpu, pid and tid in the machine.  But there's no place to set
them in the ARM SPE decoder.  I'm seeing all pid/tid is set to -1 and
user symbols are not resolved in the output.

  # perf record -a -e arm_spe_0/ts_enable=1/ sleep 1

  # perf report -q | head
     8.77%     8.77%  :-1      [kernel.kallsyms]  [k] format_decode
     7.02%     7.02%  :-1      [kernel.kallsyms]  [k] seq_printf
     7.02%     7.02%  :-1      [unknown]          [.] 0x0000ffff9f687c34
     5.26%     5.26%  :-1      [kernel.kallsyms]  [k] vsnprintf
     3.51%     3.51%  :-1      [kernel.kallsyms]  [k] string
     3.51%     3.51%  :-1      [unknown]          [.] 0x0000ffff9f66ae20
     3.51%     3.51%  :-1      [unknown]          [.] 0x0000ffff9f670b3c
     3.51%     3.51%  :-1      [unknown]          [.] 0x0000ffff9f67c040
     1.75%     1.75%  :-1      [kernel.kallsyms]  [k] ___cache_free
     1.75%     1.75%  :-1      [kernel.kallsyms]  [k] __count_memcg_events

Like Intel PT, add context switch records to track task info.  As ARM
SPE support was added later than PERF_RECORD_SWITCH_CPU_WIDE, I think
we can safely set the attr.context_switch bit and use it.

Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211111133625.193568-2-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events power10: Add metric events JSON file for power10 platform

Add PMU metric JSON file for power10 platform.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Paul Clarke <pc@us.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20211108060010.177517-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf design.txt: Synchronize the definition of enum perf_hw_id with code

We're not surprised that there are tons of Linux users who only read the
documentation to learn about the kernel.

Let's update the perf part for common hardware events since three new
*generic* hardware events were added.

Signed-off-by: Like Xu <likexu@tencent.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211109090147.56978-1-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf arm-spe: Print size using consistent format

Since the size is already printed earlier in hex, print the same data
using the same format, in hex.

Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211109142153.56546-3-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf cs-etm: Print size using consistent format

Since the size is already printed earlier in hex, print the same data
using the same format, in hex.

Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211109142153.56546-2-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf arm-spe: Snapshot mode test

Shell script test_arm_spe.sh has been added to test the recording of SPE
tracing events in snapshot mode.

Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211109163009.92072-4-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf arm-spe: Implement find_snapshot callback

The head pointer of the AUX buffer managed by the arm_spe_pmu.c driver
is not monotonically increasing, therefore the find_snapshot callback is
needed in order to find the trace data within the AUX buffer and avoid
wasting space in the perf.data file.

The pointer is assumed to have wrapped if the buffer contains non-zero
data at the end. If it has wrapped, the entire contents of the AUX
buffer are stored in the perf.data file. Otherwise only the data up to
the head pointer is stored.

Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211109163009.92072-3-german.gomez@arm.com
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf arm-spe: Add snapshot mode support

This patch enables support for snapshot mode of arm_spe events,
including the implementation of the necessary callbacks (excluding
find_snapshot, which is to be included in a followup commit).

Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211109163009.92072-2-german.gomez@arm.com
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf expr: Add source_count for aggregating events

Events like uncore_imc/cas_count_read/ on Skylake open multiple events
and then aggregate in the metric leader. To determine the average value
per event the number of these events is needed. Add a source_count
function that returns this value by counting the number of events with
the given metric leader. For most events the value is 1 but for
uncore_imc/cas_count_read/ it can yield values like 6.

Add a generic test, but manually tested with a test metric that uses
the function.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf expr: Move ID handling to its own function

This will facilitate sharing in a follow-on change.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf expr: Add metric literals for topology.

Allow the number of cpus, cores, dies and packages to be queried by a
metric expression.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf expr: Add literal values starting with #

It is useful to have literal values for constants relating to
topologies, SMT, etc. Make the parsing of literals shared code and add a
lookup function. Move #smt_on to this function.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf cputopo: Match thread_siblings to topology ABI name

The topology name for thread_siblings is core_cpus_list, use this for
consistency and add documentation.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf cputopo: Match die_siblings to topology ABI name

The topology name for die_siblings is die_cpus_list, use this for
consistency and add documentation.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf cputopo: Update to use pakage_cpus

core_siblings_list is the deprecated topology name for
package_cpus_list, update the code to try the non-deprecated path first.
Adjust variable names to match topology name.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Add expr test for events with hyphens

An example of such an event is topdown-fe-bound.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Remove skip_if_fail

Remove optionality, always run tests in a suite even if one fails. This
brings perf's test more inline with kunit that lacks this notion.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-23-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Remove is_supported function

All tests now return TEST_SKIP if not supported. Removing this function
brings perf's test_suite struct more inline with kunit.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-22-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: TSC test, remove is_supported use

Migrate the is_supported functionality to returning TEST_SKIP.
Motivation is kunit has no is_supported function.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-21-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: BP tests, remove is_supported use

Migrate the is_supported functionality to returning TEST_SKIP.
Motivation is kunit has no is_supported function.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-20-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Remove non test case style support.

Convert shell tests to also run using test case style.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-19-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Convert time to tsc test to test case.

Migration toward kunit style test cases.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-18-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: bp tests use test case

Migration toward kunit style test cases.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-17-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Remove now unused subtest helpers

Replaced by null terminated test case array.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-16-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Convert llvm tests to test cases.

Use null terminated array of test cases rather than the previous sub
test functions.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Convert bpf tests to test cases.

Use null terminated array of test cases rather than the previous sub
test functions.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Convert clang tests to test cases.

Use null terminated array of test cases rather than the previous sub
test functions.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Convert watch point tests to test cases.

Use null terminated array of test cases rather than the previous sub
test functions.

Committer notes:

On s/390x we don't use __event(), so wrap it with __s390x__

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

parisc/entry: fix trace test in syscall exit path

commit 8779e05ba8aa ("parisc: Fix ptrace check on syscall return")
fixed testing of TI_FLAGS. This uncovered a bug in the test mask.
syscall_restore_rfi is only used when the kernel needs to exit to
usespace with single or block stepping and the recovery counter
enabled. The test however used _TIF_SYSCALL_TRACE_MASK, which
includes a lot of bits that shouldn't be tested here.

Fix this by using TIF_SINGLESTEP and TIF_BLOCKSTEP directly.

I encountered this bug by enabling syscall tracepoints. Both in qemu and
on real hardware. As soon as i enabled the tracepoint (sys_exit_read,
but i guess it doesn't really matter which one), i got random page
faults in userspace almost immediately.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>