PCI: aardvark: Fix reporting Slot capabilities on emulated bridge

[ Upstream commit bcdb6fd4f3e9ac1097698c8d8f56b70853b49873 ]

Slot capabilities are currently not reported because emulated bridge does
not report the PCI_EXP_FLAGS_SLOT flag.

Set PCI_EXP_FLAGS_SLOT to let the kernel know that PCI_EXP_SLT* registers
are supported.

Move setting of PCI_EXP_SLTCTL register from "dynamic" pcie_conf_read
function to static buffer as it is only statically filled the
PCI_EXP_SLTSTA_PDS flag and dynamic read callback is not needed for this
register.

Set Presence State Bit to 1 since there is no support for unplugging the
card and there is currently no platform able to detect presence of a card -
in such a case the bit needs to be set to 1.

Finally correctly set Physical Slot Number to 1 since there is only one
port and zero value is reserved for ports within the same silicon as Root
Port which is not our case for Aardvark HW.

Link: https://lore.kernel.org/r/20220524132827.8837-3-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: uvc: call uvc uvcg_warn on completed status instead of uvcg_info

[ Upstream commit a725d0f6dfc5d3739d6499f30ec865305ba3544d ]

Likewise to the uvcvideo hostside driver, this patch is changing the
usb_request message of an non zero completion handler call from dev_info
to dev_warn.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220529223848.105914-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: uvc: calculate the number of request depending on framesize

[ Upstream commit 87d76b5f1d8eeb49efa16e2018e188864cbb9401 ]

The current limitation of possible number of requests being handled is
dependent on the gadget speed. It makes more sense to depend on the
typical frame size when calculating the number of requests. This patch
is changing this and is using the previous limits as boundaries for
reasonable minimum and maximum number of requests.

For a 1080p jpeg encoded video stream with a maximum imagesize of
e.g. 800kB with a maxburst of 8 and an multiplier of 1 the resulting
number of requests is calculated to 49.

        800768         1
nreqs = ------ * -------------- ~= 49
          2      (1024 * 8 * 1)

Tested-by: Dan Vacura <w36195@motorola.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220529223848.105914-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: cdns3: fix random warning message when driver load

[ Upstream commit 8659ab3d936fcf0084676f98b75b317017aa8f82 ]

Warning log:
[    4.141392] Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xa20 (GFP_ATOMIC). Fix your code!
[    4.150340] CPU: 1 PID: 175 Comm: 1-0050 Not tainted 5.15.5-00039-g2fd9ae1b568c #20
[    4.158010] Hardware name: Freescale i.MX8QXP MEK (DT)
[    4.163155] Call trace:
[    4.165600]  dump_backtrace+0x0/0x1b0
[    4.169286]  show_stack+0x18/0x68
[    4.172611]  dump_stack_lvl+0x68/0x84
[    4.176286]  dump_stack+0x18/0x34
[    4.179613]  kmalloc_fix_flags+0x60/0x88
[    4.183550]  new_slab+0x334/0x370
[    4.186878]  ___slab_alloc.part.108+0x4d4/0x748
[    4.191419]  __slab_alloc.isra.109+0x30/0x78
[    4.195702]  kmem_cache_alloc+0x40c/0x420
[    4.199725]  dma_pool_alloc+0xac/0x1f8
[    4.203486]  cdns3_allocate_trb_pool+0xb4/0xd0

pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags)
{
...
page = kmalloc(sizeof(*page), mem_flags);
page->vaddr = dma_alloc_coherent(pool->dev, pool->allocation,
 &page->dma, mem_flags);
...
}

kmalloc was called with mem_flags, which is passed down in
cdns3_allocate_trb_pool() and have GFP_DMA32 flags.
kmall_fix_flags() report warning.

GFP_DMA32 is not useful at all. dma_alloc_coherent() will handle
DMA memory region correctly by pool->dev. GFP_DMA32 can be removed
safely.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20220609154456.2871672-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: cdns3 fix use-after-free at workaround 2

[ Upstream commit 7d602f30149a117eea260208b1661bc404c21dfd ]

BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xac

cdns3_wa2_remove_old_request()
{
...
kfree(priv_req->request.buf);
cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request);
list_del_init(&priv_req->list);
^^^ use after free
...
}

cdns3_gadget_ep_free_request() free the space pointed by priv_req,
but priv_req is used in the following list_del_init().

This patch move list_del_init() before cdns3_gadget_ep_free_request().

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Faqiang Zhu <faqiang.zhu@nxp.com>
Link: https://lore.kernel.org/r/20220608190430.2814358-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec_proto: don't show MKBP version if unsupported

[ Upstream commit b36f0643ff14a2fb281b105418e4e73c9d7c11d0 ]

It wrongly showed the following message when it doesn't support MKBP:
"MKBP support version 4294967295".

Fix it.

Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-14-tzungbi@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add ACS quirk for Broadcom BCM5750x NICs

[ Upstream commit afd306a65cedb9589564bdb23a0c368abc4215fd ]

The Broadcom BCM5750x NICs may be multi-function devices.  They do not
advertise ACS capability. Peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.

Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.

Link: https://lore.kernel.org/r/1654796507-28610-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: new device class fix Lenovo X12 trackpad sticky

[ Upstream commit 54eed5c7b938dc4ef6b14d4ee048bbdafdbce352 ]

The trackpad of the given device sends continuous report of pointers
status as per wxn8 spec. However, the spec did not clarify when the
fingers are lifted so fast that between the interval of two report
frames fingers on pad reduced from >=2 to 0. The second last report
contains >=2 fingers with tip state 1 and the last report contains only
1 finger with tip state 0. Although this can happen unfrequently, a
  quick fix will be improve the consistency to 100%. A quick fix is to
disable MT_QUIRK_ALWAYS_VALID and enable MT_QUIRK_NOT_SEEN_MEANS_UP.

Test for hid-tools is added in [1]

In addition to this, I2C device 04CA:00B1 may also need similar class
but with MT_QUIRK_FORCE_MULTI_INPUT disabled (but it does not harm to
 enable it on non-multi-input device either). The respective owner has
been notified and a patch may coming soon after test.

[1]: https://gitlab.freedesktop.org/libevdev/hid-tools/-/merge_requests/130

Signed-off-by: Tao Jin <tao-j@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Reject 32bit user PSTATE on asymmetric systems

[ Upstream commit b10d86fb8e46cc812171728bcd326df2f34e9ed5 ]

KVM does not support AArch32 EL0 on asymmetric systems. To that end,
prevent userspace from configuring a vCPU in such a state through
setting PSTATE.

It is already ABI that KVM rejects such a write on a system where
AArch32 EL0 is unsupported. Though the kernel's definition of a 32bit
system changed in commit 2122a833316f ("arm64: Allow mismatched
32-bit EL0 support"), KVM's did not.

Fixes: 2122a833316f ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-3-oliver.upton@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Treat PMCR_EL1.LC as RES1 on asymmetric systems

[ Upstream commit f3c6efc72f3b20ec23566e768979802f0a398f04 ]

KVM does not support AArch32 on asymmetric systems. To that end, enforce
AArch64-only behavior on PMCR_EL1.LC when on an asymmetric system.

Fixes: 2122a833316f ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-2-oliver.upton@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qrtr: start MHI channel after endpoit creation

[ Upstream commit 68a838b84effb7b57ba7d50b1863fc6ae35a54ce ]

MHI channel may generates event/interrupt right after enabling.
It may leads to 2 race conditions issues.

1)
Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check:

if (!qdev || mhi_res->transaction_status)
return;

Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at
this moment. In this situation qrtr-ns will be unable to enumerate
services in device.
---------------------------------------------------------------

2)
Such event may come at the moment after dev_set_drvdata() and
before qrtr_endpoint_register(). In this case kernel will panic with
accessing wrong pointer at qcom_mhi_qrtr_dl_callback():

rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr,
mhi_res->bytes_xferd);

Because endpoint is not created yet.
--------------------------------------------------------------
So move mhi_prepare_for_transfer_autoqueue after endpoint creation
to fix it.

Fixes: a2e2cc0dbb11 ("net: qrtr: Start MHI channels during init")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Hemant Kumar <quic_hemantk@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: dsi: Prevent underflow when computing packet sizes

[ Upstream commit 82a1356a933d8443139f8886f11b63c974a09a67 ]

Currently, the packet overhead is subtracted using unsigned arithmetic.
With a short sync pulse, this could underflow and wrap around to near
the maximal u16 value. Fix this by using signed subtraction. The call to
max() will correctly handle any negative numbers that are produced.

Apply the same fix to the other timings, even though those subtractions
are less likely to underflow.

Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220812031623.34057-1-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Fix refcount bugs in meson_vpu_has_available_connectors()

[ Upstream commit 91b3c8dbe898df158fd2a84675f3a284ff6666f7 ]

In this function, there are two refcount leak bugs:
(1) when breaking out of for_each_endpoint_of_node(), we need call
the of_node_put() for the 'ep';
(2) we should call of_node_put() for the reference returned by
of_graph_get_remote_port() when it is not used anymore.

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Liang He <windhl@126.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726010722.1319416-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda: Fix potential buffer overflow by snprintf()

[ Upstream commit 94c1ceb043c1a002de9649bb630c8e8347645982 ]

snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in the buffer
overflow (although it's unrealistic).

This patch replaces with a safer version, scnprintf() for papering
over such a potential issue.

Fixes: 29c8e4398f02 ("ASoC: SOF: Intel: hda: add extended rom status dump to error log")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801165420.25978-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda: Define rom_status_reg in sof_intel_dsp_desc

[ Upstream commit 71778f7940f0b496aa1ca1134f3b70b425a59bab ]

Add the rom_status_reg field to struct sof_intel_dsp_desc and define
it for HDA platforms. This will be used to check the ROM status during
FW boot.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/imx/dcss: get rid of HPD warning message

[ Upstream commit 30bdc36b8c776cd4fce5de2a96ff28b37f96942f ]

When DCSS + MIPI_DSI is used, and the last bridge in the chain supports
HPD, we can see a "Hot plug detection already enabled" warning stack
trace dump that's thrown when DCSS is initialized.

The problem appeared when HPD was enabled by default in the
bridge_connector initialization, which made the
drm_bridge_connector_enable_hpd() call, in DCSS init path, redundant.
So, let's remove that call.

Fixes: 09077bc311658 ("drm/bridge_connector: enable HPD by default if supported")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721120912.6639-1-laurentiu.palcu@oss.nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/eprobes: Fix reading of string fields

commit f04dec93466a0481763f3b56cdadf8076e28bfbf upstream.

Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.

Now when a string field is used, the ":string" type can be used to display
it:

  echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events

Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a file

commit 012e8d2034f1bda8863435cd589636e618d6a659 upstream.

Commit 36d4b36b6959 ("lib/nodemask: inline next_node_in() and
node_random()") refactored some code by moving node_random() from
lib/nodemask.c to include/linux/nodemask.h, thus requiring nodemask.h to
include random.h, which conditionally defines add_latent_entropy()
depending on whether the macro LATENT_ENTROPY_PLUGIN is defined.

This broke the build on powerpc, where nodemask.h is indirectly included
in arch/powerpc/kernel/prom_init.c, part of the early boot machinery that
is excluded from the latent entropy plugin using
DISABLE_LATENT_ENTROPY_PLUGIN. It turns out that while we add a gcc flag
to disable the actual plugin, we don't undefine LATENT_ENTROPY_PLUGIN.

This leads to the following:

    CC      arch/powerpc/kernel/prom_init.o
  In file included from ./include/linux/nodemask.h:97,
                   from ./include/linux/mmzone.h:17,
                   from ./include/linux/gfp.h:7,
                   from ./include/linux/xarray.h:15,
                   from ./include/linux/radix-tree.h:21,
                   from ./include/linux/idr.h:15,
                   from ./include/linux/kernfs.h:12,
                   from ./include/linux/sysfs.h:16,
                   from ./include/linux/kobject.h:20,
                   from ./include/linux/pci.h:35,
                   from arch/powerpc/kernel/prom_init.c:24:
  ./include/linux/random.h: In function 'add_latent_entropy':
  ./include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
     25 |         add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
        |                                              ^~~~~~~~~~~~~~
        |                                              add_latent_entropy
  ./include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
  make[2]: *** [scripts/Makefile.build:249: arch/powerpc/kernel/prom_init.o] Fehler 1
  make[1]: *** [scripts/Makefile.build:465: arch/powerpc/kernel] Fehler 2
  make: *** [Makefile:1855: arch/powerpc] Error 2

Change the DISABLE_LATENT_ENTROPY_PLUGIN flags to undefine
LATENT_ENTROPY_PLUGIN for files where the plugin is disabled.

Cc: Yury Norov <yury.norov@gmail.com>
Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216367
Link: https://lore.kernel.org/linuxppc-dev/alpine.DEB.2.22.394.2208152006320.289321@ramsan.of.borg/
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220816051720.44108-1-ajd@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: fix the modules order between drivers and libs

commit 113147510b48e764e624e3d0e6707a1e48bc05a9 upstream.

Commit b2c885549122 ("kbuild: update modules.order only when contained
modules are updated") accidentally changed the modules order.

Prior to that commit, the modules order was determined based on
vmlinux-dirs, which lists core-y/m, drivers-y/m, libs-y/m, in this order.

Now, subdir-modorder lists them in a different order: core-y/m, libs-y/m,
drivers-y/m.

Presumably, there was no practical issue because the modules in drivers
and libs are orthogonal, but there is no reason to have this distortion.

Get back to the original order.

Fixes: b2c885549122 ("kbuild: update modules.order only when contained modules are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: Add lock to avoid data race

commit 6faee3d4ee8be0f0367d0c3d826afb3571b7a5e0 upstream.

The commit c23d92b80e0b ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.

However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.

 (FREE from device detaching)      |   (USE from netdev core)
igb_remove                         |  igb_ndo_get_vf_config
 igb_disable_sriov                 |  vf >= adapter->vfs_allocated_count?
  kfree(adapter->vf_data)          |
  adapter->vfs_allocated_count = 0 |
                                   |    memcpy(... adapter->vf_data[vf]

Moreover, the igb_disable_sriov() also suffers from data race with the
requests from VF driver.

 (FREE from device detaching)      |   (USE from requests)
igb_remove                         |  igb_msix_other
 igb_disable_sriov                 |   igb_msg_task
  kfree(adapter->vf_data)          |    vf < adapter->vfs_allocated_count
  adapter->vfs_allocated_count = 0 |

To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit 1e53834ce541
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")

Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()

commit 5c23d6b717e4e956376f3852b90f58e262946b50 upstream.

Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove
paths") removed this clk_disable_unprepare()

This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock
handling on remove path") which removed this clk_disable_unprepare()
because:
"
   While unloading the dwmac-intel driver, clk_disable_unprepare() is
   being called twice in stmmac_dvr_remove() and
   intel_eth_pci_remove(). This causes kernel panic on the second call.
"

However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management
for gmac driver") has updated stmmac_dvr_remove() which do not call
clk_disable_unprepare() anymore.

So this call should now be called from intel_eth_pci_remove().

Fixes: 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fec: Fix timer capture timing in `fec_ptp_enable_pps()`

commit 61d5e2a251fb20c2c5e998c3f1d52ed6d5360319 upstream.

Code reimplements functionality already in `fec_ptp_read()`,
but misses check for FEC_QUIRK_BUG_CAPTURE. Replace with function call.

Fixes: 28b5f058cf1d ("net: fec: ptp: fix convergence issue to support LinuxPTP stack")
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20220811101348.13755-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix to stop tx_timeout recovery if GLOBR fails

commit 57c942bc3bef0970f0b21f8e0998e76a900ea80d upstream.

When a tx_timeout fires, the PF attempts to recover by incrementally
resetting.  First we try a PFR, then CORER and finally a GLOBR.  If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.

If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: pca9450: Remove restrictions for regulator-name

commit b0de7fa706506bf0591037908376351beda8c5d6 upstream.

The device bindings shouldn't put any constraints on the regulator-name
property specified in the generic bindings. This allows using arbitrary
and descriptive names for the regulators.

Suggested-by: Mark Brown <broonie@kernel.org>
Fixes: 7ae9e3a6bf3f ("dt-bindings: regulator: add pca9450 regulator yaml")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20220802064335.8481-1-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: imx: Make sure to unregister adapter on remove()

commit d98bdd3a5b50446d8e010be5b04ce81c4eabf728 upstream.

If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.

So unregister the software resources even if resume failed, and only skip
the hardware access in that case.

Fixes: 588eb93ea49f ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: Ignore EEXIST when setting promisc mode

commit 11e551a2efa4481bd4f616ab75374a2710b480e9 upstream.

Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.

Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: sja1105: fix buffer overflow in sja1105_setup_devlink_regions()

commit fd8e899cdb5ecaf8e8ee73854a99e10807eef1de upstream.

If an error occurs in dsa_devlink_region_create(), then 'priv->regions'
array will be accessed by negative index '-1'.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: bf425b82059e ("net: dsa: sja1105: expose static config as devlink region")
Link: https://lore.kernel.org/r/20220817003845.389644-1-subkhankulov@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it

commit 211987f3ac734000ea1548784b2a4539a974fbc8 upstream.

ds->ops->port_stp_state_set() is, like most DSA methods, optional, and
if absent, the port is supposed to remain in the forwarding state (as
standalone). Such is the case with the mv88e6060 driver, which does not
offload the bridge layer. DSA warns that the STP state can't be changed
to FORWARDING as part of dsa_port_enable_rt(), when in fact it should not.

The error message is also not up to modern standards, so take the
opportunity to make it more descriptive.

Fixes: fd3645413197 ("net: dsa: change scope of STP state setter")
Reported-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20220816201445.1809483-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: genl: fix error path memory leak in policy dumping

commit 249801360db3dec4f73768c502192020bfddeacc upstream.

If construction of the array of policies fails when recording
non-first policy we need to unwind.

netlink_policy_dump_add_policy() itself also needs fixing as
it currently gives up on error without recording the allocated
pointer in the pstate pointer.

Reported-by: syzbot+dc54d9ba8153b216cae0@syzkaller.appspotmail.com
Fixes: 50a896cf2d6f ("genetlink: properly support per-op policy dumping")
Link: https://lore.kernel.org/r/20220816161939.577583-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters

commit 40d21c4565bce064c73a03b79a157a3493c518b9 upstream.

What the driver actually reports as 256-511 is in fact 512-1023, and the
TX packets in the 256-511 bucket are not reported. Fix that.

Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: microchip: ksz9477: fix fdb_dump last invalid entry

commit 36c0d935015766bf20d621c18313f17691bda5e3 upstream.

In the ksz9477_fdb_dump function it reads the ALU control register and
exit from the timeout loop if there is valid entry or search is
complete. After exiting the loop, it reads the alu entry and report to
the user space irrespective of entry is valid. It works till the valid
entry. If the loop exited when search is complete, it reads the alu
table. The table returns all ones and it is reported to user space. So
bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port.
To fix it, after exiting the loop the entry is reported only if it is
valid one.

Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix potential refcount leak in ndisc_router_discovery()

commit 7396ba87f1edf549284869451665c7c4e74ecd4f upstream.

The issue happens on specific paths in the function. After both the
object `rt` and `neigh` are grabbed successfully, when `lifetime` is
nonzero but the metric needs change, the function just deletes the
route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh`
again if above conditions hold. The function simply overwrite `neigh`
if succeeds or returns if fails, without decreasing the reference
count of previous `neigh`. This may result in memory leaks.

Fix it by decrementing the reference count of `neigh` in place.

Fixes: 6b2e04bc240f ("net: allow user to set metric on default route learned via Router Advertisement")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: moxa: pass pdev instead of ndev to DMA functions

commit 3a12df22a8f68954a4ba48435c06b3d1791c87c4 upstream.

dma_map_single() calls fail in moxart_mac_setup_desc_ring() and
moxart_mac_start_xmit() which leads to an incessant output of this:

[   16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error
[   16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error
[   16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error

Passing pdev to DMA is a common approach among net drivers.

Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220812171339.2271788-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum: Clear PTP configuration after unregistering the netdevice

commit a159e986ad26d3f35c0157ac92760ba5e44e6785 upstream.

Currently as part of removing port, PTP API is called to clear the
existing configuration and set the 'rx_filter' and 'tx_type' to zero.
The clearing is done before unregistering the netdevice, which means that
there is a window of time in which the user can reconfigure PTP in the
port, and this configuration will not be cleared.

Reorder the operations, clear PTP configuration after unregistering the
netdevice.

Fixes: 8748642751ede ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6060: prevent crash on an unused port

commit 246bbf2f977ea36aaf41f5d24370fef433250728 upstream.

If the port isn't a CPU port nor a user port, 'cpu_dp'
is a null pointer and a crash happened on dereferencing
it in mv88e6060_setup_port():

[    9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014
...
[    9.942216]  mv88e6060_setup from dsa_register_switch+0x814/0xe84
[    9.948616]  dsa_register_switch from mdio_probe+0x2c/0x54
[    9.954433]  mdio_probe from really_probe.part.0+0x98/0x2a0
[    9.960375]  really_probe.part.0 from driver_probe_device+0x30/0x10c
[    9.967029]  driver_probe_device from __device_attach_driver+0xb8/0x13c
[    9.973946]  __device_attach_driver from bus_for_each_drv+0x90/0xe0
[    9.980509]  bus_for_each_drv from __device_attach+0x110/0x184
[    9.986632]  __device_attach from bus_probe_device+0x8c/0x94
[    9.992577]  bus_probe_device from deferred_probe_work_func+0x78/0xa8
[    9.999311]  deferred_probe_work_func from process_one_work+0x290/0x73c
[   10.006292]  process_one_work from worker_thread+0x30/0x4b8
[   10.012155]  worker_thread from kthread+0xd4/0x10c
[   10.017238]  kthread from ret_from_fork+0x14/0x3c

Fixes: 0abfd494deef ("net: dsa: use dedicated CPU port")
CC: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220811070939.1717146-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sunrpc: fix potential memory leaks in rpc_sysfs_xprt_state_change()

commit bfc48f1b0505ffcb03a6d749139b7577d6b81ae0 upstream.

The issue happens on some error handling paths. When the function
fails to grab the object `xprt`, it simply returns 0, forgetting to
decrease the reference count of another object `xps`, which is
increased by rpc_sysfs_xprt_kobj_get_xprt_switch(), causing refcount
leaks. Also, the function forgets to check whether `xps` is valid
before using it, which may result in NULL-dereferencing issues.

Fix it by adding proper error handling code when either `xprt` or
`xps` is NULL.

Fixes: 5b7eb78486cd ("SUNRPC: take a xprt offline using sysfs")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: meson-spicc: add local pow2 clock ops to preserve rate between messages

commit 09992025dacd258c823f50e82db09d7ef06cdac4 upstream.

At the end of a message, the HW gets a reset in meson_spicc_unprepare_transfer(),
this resets the SPICC_CONREG register and notably the value set by the
Common Clock Framework.

This is problematic because:
- the register value CCF can be different from the corresponding CCF cached rate
- CCF is allowed to change the clock rate whenever the HW state

This introduces:
- local pow2 clock ops checking the HW state before allowing a clock operation
- separation of legacy pow2 clock patch and new enhanced clock path
- SPICC_CONREG datarate value is now value kepts across messages

It has been checked that:
- SPICC_CONREG datarate value is kept across messages
- CCF is only allowed to change the SPICC_CONREG datarate value when busy
- SPICC_CONREG datarate value is correct for each transfer

This didn't appear before commit 3e0cf4d3fc29 ("spi: meson-spicc: add a linear clock divider support")
because we recalculated and wrote the rate for each xfer.

Fixes: 3e0cf4d3fc29 ("spi: meson-spicc: add a linear clock divider support")
Reported-by: Da Xue <da@libre.computer>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220811134445.678446-1-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pci: Fix get_phb_number() locking

commit 8d48562a2729742f767b0fdd994d6b2a56a49c63 upstream.

The recent change to get_phb_number() causes a DEBUG_ATOMIC_SLEEP
warning on some systems:

  BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper
  preempt_count: 1, expected: 0
  RCU nest depth: 0, expected: 0
  1 lock held by swapper/1:
   #0: c157efb0 (hose_spinlock){+.+.}-{2:2}, at: pcibios_alloc_controller+0x64/0x220
  Preemption disabled at:
  [<00000000>] 0x0
  CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0-yocto-standard+ #1
  Call Trace:
  [d101dc90] [c073b264] dump_stack_lvl+0x50/0x8c (unreliable)
  [d101dcb0] [c0093b70] __might_resched+0x258/0x2a8
  [d101dcd0] [c0d3e634] __mutex_lock+0x6c/0x6ec
  [d101dd50] [c0a84174] of_alias_get_id+0x50/0xf4
  [d101dd80] [c002ec78] pcibios_alloc_controller+0x1b8/0x220
  [d101ddd0] [c140c9dc] pmac_pci_init+0x198/0x784
  [d101de50] [c140852c] discover_phbs+0x30/0x4c
  [d101de60] [c0007fd4] do_one_initcall+0x94/0x344
  [d101ded0] [c1403b40] kernel_init_freeable+0x1a8/0x22c
  [d101df10] [c00086e0] kernel_init+0x34/0x160
  [d101df30] [c001b334] ret_from_kernel_thread+0x5c/0x64

This is because pcibios_alloc_controller() holds hose_spinlock but
of_alias_get_id() takes of_mutex which can sleep.

The hose_spinlock protects the phb_bitmap, and also the hose_list, but
it doesn't need to be held while get_phb_number() calls the OF routines,
because those are only looking up information in the device tree.

So fix it by having get_phb_number() take the hose_spinlock itself, only
where required, and then dropping the lock before returning.
pcibios_alloc_controller() then needs to take the lock again before the
list_add() but that's safe, the order of the list is not important.

Fixes: 0fe1e96fef0a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220815065550.1303620-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified

commit 1b6345d4160ecd3d04bd8cd75df90c67811e8cc9 upstream.

Since f3a2181e16f1 ("netfilter: nf_tables: Support for sets with
multiple ranged fields"), it possible to combine intervals and
concatenations. Later on, ef516e8625dd ("netfilter: nf_tables:
reintroduce the NFT_SET_CONCAT flag") provides the NFT_SET_CONCAT flag
for userspace to report that the set stores a concatenation.

Make sure NFT_SET_CONCAT is set on if field_count is specified for
consistency. Otherwise, if NFT_SET_CONCAT is specified with no
field_count, bail out with EINVAL.

Fixes: ef516e8625dd ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: disallow NFT_SET_ELEM_CATCHALL and NFT_SET_ELEM_INTERVAL_END

commit fc0ae524b5fd2938c94d56da3f749f11eb3273d5 upstream.

These flags are mutually exclusive, report EINVAL in this case.

Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags

commit 88cccd908d51397f9754f89a937cd13fa59dee37 upstream.

If the NFT_SET_CONCAT|NFT_SET_INTERVAL flags are set on, then the
netlink attribute NFTA_SET_ELEM_KEY_END must be specified. Otherwise,
NFTA_SET_ELEM_KEY_END should not be present.

For catch-all element, NFTA_SET_ELEM_KEY_END should not be present.
The NFT_SET_ELEM_INTERVAL_END is never used with this set flags
combination.

Fixes: 7b225d0b5c6d ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag

commit 5a2f3dc31811e93be15522d9eb13ed61460b76c8 upstream.

If the NFTA_SET_ELEM_OBJREF netlink attribute is present and
NFT_SET_OBJECT flag is set on, report EINVAL.

Move existing sanity check earlier to validate that NFT_SET_OBJECT
requires NFTA_SET_ELEM_OBJREF.

Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: really skip inactive sets when allocating name

commit 271c5ca826e0c3c53e0eb4032f8eaedea1ee391c upstream.

While looping to build the bitmap of used anonymous set names, check the
current set in the iteration, instead of the one that is being created.

Fixes: 37a9cc525525 ("netfilter: nf_tables: add generation mask to sets")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: possible module reference underflow in error path

commit c485c35ff6783ccd12c160fcac6a0e504e83e0bf upstream.

dst->ops is set on when nft_expr_clone() fails, but module refcount has
not been bumped yet, therefore nft_expr_destroy() leads to module
reference underflow.

Fixes: 8cfd9b0f8515 ("netfilter: nftables: generalize set expressions support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: disallow NFTA_SET_ELEM_KEY_END with NFT_SET_ELEM_INTERVAL_END flag

commit 4963674c2e71fc062f8f089f0f58ffbb5533060b upstream.

These are mutually exclusive, actually NFTA_SET_ELEM_KEY_END replaces
the flag notation.

Fixes: 7b225d0b5c6d ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: uninitialized variable in ntfs_set_acl_ex()

commit d4073595d0c61463ec3a87411b19e2a90f76d3f8 upstream.

The goto out calls kfree(value) on an uninitialized pointer.  Just
return directly as the other error paths do.

Fixes: 460bbf2990b3 ("fs/ntfs3: Do not change mode if ntfs_set_ea failed")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: use READ_ONCE and WRITE_ONCE for shared generation id access

commit 3400278328285a8c2f121904496aff5e7b610a01 upstream.

The generation ID is bumped from the commit path while holding the
mutex, however, netlink dump operations rely on RCU.

This patch also adds missing cb->base_eq initialization in
nf_tables_dump_set().

Fixes: 38e029f14a97 ("netfilter: nf_tables: set NLM_F_DUMP_INTR if netlink dumping is stale")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codec: tlv320aic32x4: fix mono playback via I2S

commit b4b5f29a076e52181f63e45a2ad1bc88593072e3 upstream.

The two commits referenced below break mono playback via I2S DAI because
they set BCLK to half the required speed. For PCM transport over I2S, the
number of transmitted channels is always 2, even for mono playback.

Fixes: dcd79364bff3 ("ASoC: codec: tlv3204: Enable 24 bit audio support")
Fixes: 40b37136287b ("ASoC: tlv320aic32x4: Fix bdiv clock rate derivation")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220810104156.665452-1-p.zabel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2770: Fix handling of mute/unmute

commit 1e5907bcb3a3b569be0a03ebe668bba2ed320a50 upstream.

Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one can mute an ongoing stream
by toggling a speaker pin control.

Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2770: Drop conflicting set_bias_level power setting

commit 482c23fbc7e9bf5a7a74defd0735d5346215db58 upstream.

The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.

Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2770: Allow mono streams

commit bf54d97a835dfe62d4d29e245e170c63d0089be7 upstream.

The part is a mono speaker amp, but it can do downmix and switch between
left and right channel, so the right channel range is 1 to 2.

Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2770: Set correct FSYNC polarity

commit e9ac31f0a5d0e246b046c20348954519f91a297f upstream.

Fix setting of FSYNC polarity for DAI formats other than I2S. Also
add support for polarity inversion.

Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: debug: Fix potential buffer overflow by snprintf()

commit 1eb123ce985e6cf302ac6e3f19862d132d86fa8f upstream.

snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in the buffer
overflow (although it's unrealistic).

This patch replaces with a safer version, scnprintf() for papering
over such a potential issue.

Fixes: 5b10b6298921 ("ASoC: SOF: Add `memory_info` file to debugfs")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801165420.25978-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iavf: Fix reset error handling

commit 31071173771e079f7bc08dacd61e0db913262fbf upstream.

Do not call iavf_close in iavf_reset_task error handling. Doing so can
lead to double call of napi_disable, which can lead to deadlock there.
Removing VF would lead to iavf_remove task being stuck, because it
requires crit_lock, which is held by iavf_close.
Call iavf_disable_vf if reset fail, so that driver will clean up
remaining invalid resources.
During rapid VF resets, HW can fail to setup VF mailbox. Wrong
error handling can lead to iavf_remove being stuck with:
[ 5218.999087] iavf 0000:82:01.0: Failed to init adminq: -53
...
[ 5267.189211] INFO: task repro.sh:11219 blocked for more than 30 seconds.
[ 5267.189520]       Tainted: G S          E     5.18.0-04958-ga54ce3703613-dirty #1
[ 5267.189764] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5267.190062] task:repro.sh        state:D stack:    0 pid:11219 ppid:  8162 flags:0x00000000
[ 5267.190347] Call Trace:
[ 5267.190647]  <TASK>
[ 5267.190927]  __schedule+0x460/0x9f0
[ 5267.191264]  schedule+0x44/0xb0
[ 5267.191563]  schedule_preempt_disabled+0x14/0x20
[ 5267.191890]  __mutex_lock.isra.12+0x6e3/0xac0
[ 5267.192237]  ? iavf_remove+0xf9/0x6c0 [iavf]
[ 5267.192565]  iavf_remove+0x12a/0x6c0 [iavf]
[ 5267.192911]  ? _raw_spin_unlock_irqrestore+0x1e/0x40
[ 5267.193285]  pci_device_remove+0x36/0xb0
[ 5267.193619]  device_release_driver_internal+0xc1/0x150
[ 5267.193974]  pci_stop_bus_device+0x69/0x90
[ 5267.194361]  pci_stop_and_remove_bus_device+0xe/0x20
[ 5267.194735]  pci_iov_remove_virtfn+0xba/0x120
[ 5267.195130]  sriov_disable+0x2f/0xe0
[ 5267.195506]  ice_free_vfs+0x7d/0x2f0 [ice]
[ 5267.196056]  ? pci_get_device+0x4f/0x70
[ 5267.196496]  ice_sriov_configure+0x78/0x1a0 [ice]
[ 5267.196995]  sriov_numvfs_store+0xfe/0x140
[ 5267.197466]  kernfs_fop_write_iter+0x12e/0x1c0
[ 5267.197918]  new_sync_write+0x10c/0x190
[ 5267.198404]  vfs_write+0x24e/0x2d0
[ 5267.198886]  ksys_write+0x5c/0xd0
[ 5267.199367]  do_syscall_64+0x3a/0x80
[ 5267.199827]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 5267.200317] RIP: 0033:0x7f5b381205c8
[ 5267.200814] RSP: 002b:00007fff8c7e8c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 5267.201981] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5b381205c8
[ 5267.202620] RDX: 0000000000000002 RSI: 00005569420ee900 RDI: 0000000000000001
[ 5267.203426] RBP: 00005569420ee900 R08: 000000000000000a R09: 00007f5b38180820
[ 5267.204327] R10: 000000000000000a R11: 0000000000000246 R12: 00007f5b383c06e0
[ 5267.205193] R13: 0000000000000002 R14: 00007f5b383bb880 R15: 0000000000000002
[ 5267.206041]  </TASK>
[ 5267.206970] Kernel panic - not syncing: hung_task: blocked tasks
[ 5267.207809] CPU: 48 PID: 551 Comm: khungtaskd Kdump: loaded Tainted: G S          E     5.18.0-04958-ga54ce3703613-dirty #1
[ 5267.208726] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019
[ 5267.209623] Call Trace:
[ 5267.210569]  <TASK>
[ 5267.211480]  dump_stack_lvl+0x33/0x42
[ 5267.212472]  panic+0x107/0x294
[ 5267.213467]  watchdog.cold.8+0xc/0xbb
[ 5267.214413]  ? proc_dohung_task_timeout_secs+0x30/0x30
[ 5267.215511]  kthread+0xf4/0x120
[ 5267.216459]  ? kthread_complete_and_exit+0x20/0x20
[ 5267.217505]  ret_from_fork+0x22/0x30
[ 5267.218459]  </TASK>

Fixes: f0db78928783 ("i40evf: use netdev variable in reset task")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iavf: Fix adminq error handling

commit 419831617ed349992c84344dbd9e627f9e68f842 upstream.

iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent
memory for VF mailbox.
Free DMA regions for both ASQ and ARQ in case error happens during
configuration of ASQ/ARQ registers.
Without this change it is possible to see when unloading interface:
74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32]
One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]

Fixes: d358aa9a7a2d ("i40evf: init code and hardware support")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: add force_successful_syscall_return()

commit fd0c153daad135d0ec1a53c5dbe6936a724d6ae1 upstream.

If we use the ancient SysV syscall ABI, we'd better have tell the
kernel how to claim that a negative return value is a success.
Use ->orig_r2 for that - it's inaccessible via ptrace, so it's
a fair game for changes and it's normally[*] non-negative on return
from syscall.  Set to -1; syscall is not going to be restart-worthy
by definition, so we won't interfere with that use either.

[*] the only exception is rt_sigreturn(), where we skip the entire
messing with r1/r2 anyway.

Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: restarts apply only to the first sigframe we build...

commit 411a76b7219555c55867466c82d70ce928d6c9e1 upstream.

Fixes: b53e906d255d ("nios2: Signal handling support")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: fix syscall restart checks

commit 2d631bd58fe0ea3e3350212e23c9aba1fb606514 upstream.

sys_foo() returns -512 (aka -ERESTARTSYS) => do_signal() sees
512 in r2 and 1 in r1.

sys_foo() returns 512 => do_signal() sees 512 in r2 and 0 in r1.

The former is restart-worthy; the latter obviously isn't.

Fixes: b53e906d255d ("nios2: Signal handling support")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: traced syscall does need to check the syscall number

commit 25ba820ef36bdbaf9884adeac69b6e1821a7df76 upstream.

all checks done before letting the tracer modify the register
state are worthless...

Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: don't leave NULLs in sys_call_table[]

commit 45ec746c65097c25e77d24eae8fee0def5b6cc5d upstream.

fill the gaps in there with sys_ni_syscall, as everyone does...

Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: page fault et.al. are *not* restartable syscalls...

commit 8535c239ac674f7ead0f2652932d35c52c4123b2 upstream.

make sure that ->orig_r2 is negative for everything except
the syscalls.

Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix missing i_op in ntfs_read_mft

commit 37a530bfe56ca9a0d3129598803f2794c7428aae upstream.

There is null pointer dereference because i_op == NULL.
The bug happens because we don't initialize i_op for records in $Extend.
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")

Reported-by: Liangbin Lian <jjm2473@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Do not change mode if ntfs_set_ea failed

commit 460bbf2990b3fdc597601c2cf669a3371c069242 upstream.

ntfs_set_ea can fail with NOSPC, so we don't need to
change mode in this situation.
Fixes xfstest generic/449
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix double free on remount

commit cd39981fb92adf0cc736112f87e3e61602baa415 upstream.

Pointer to options was freed twice on remount
Fixes xfstest generic/361
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Don't clear upper bits accidentally in log_replay()

commit 926034353d3c67db1ffeab47dcb7f6bdac02a263 upstream.

The "vcn" variable is a 64 bit.  The "log->clst_per_page" variable is a
u32.  This means that the mask accidentally clears out the high 32 bits
when it was only supposed to clear some low bits.  Fix this by adding a
cast to u64.

Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix NULL deref in ntfs_update_mftmirr

commit 321460ca3b55f48b3ba6008248264ab2bd6407d9 upstream.

If ntfs_fill_super() wasn't called then sbi->sb will be equal to NULL.
Code should check this ptr before dereferencing. Syzbot hit this issue
via passing wrong mount param as can be seen from log below

Fail log:
ntfs3: Unknown parameter 'iochvrset'
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 1 PID: 3589 Comm: syz-executor210 Not tainted 5.18.0-rc3-syzkaller-00016-gb253435746d9 #0
...
Call Trace:
 <TASK>
 put_ntfs+0x1ed/0x2a0 fs/ntfs3/super.c:463
 ntfs_fs_free+0x6a/0xe0 fs/ntfs3/super.c:1363
 put_fs_context+0x119/0x7a0 fs/fs_context.c:469
 do_new_mount+0x2b4/0xad0 fs/namespace.c:3044
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]

Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Reported-and-tested-by: syzbot+c95173762127ad76a824@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix using uninitialized value n when calling indx_read

commit ae5a4e46916fc307288227b64c1d062352eb93b7 upstream.

This value is checked in indx_read, so it must be initialized
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")

Signed-off-by: Yan Lei <chinayanlei2002@163.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa2-eth: trace the allocated address instead of page struct

commit e34f49348f8b7a53205b6f77707a3a6a40cf420b upstream.

We should trace the allocated address instead of page struct.

Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tests: Fix Track with sched_switch test for hybrid case

commit 1da1d60774014137d776d0400fdf2f1779d8d4d5 upstream.

If cpu_core PMU event fails to parse, try also cpu_atom PMU event when
parsing cycles event.

Fixes: 43eb05d066795bdf ("perf tests: Support 'Track with sched_switch' test for hybrid")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220809080702.6921-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf parse-events: Fix segfault when event parser gets an error

commit 2e828582b81f5bc76a4fe8e7812df259ab208302 upstream.

parse_events() is often called with parse_events_error set to NULL.
Make parse_events_error__handle() not segfault in that case.

A subsequent patch changes to avoid passing NULL in the first place.

Fixes: 43eb05d066795bdf ("perf tests: Support 'Track with sched_switch' test for hybrid")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220809080702.6921-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe: Fix an error handling path in 'parse_perf_probe_command()'

commit 4bf6dcaa93bcd083a13c278a91418fe10e6d23a0 upstream.

If a memory allocation fail, we should branch to the error handling path
in order to free some resources allocated a few lines above.

Fixes: 15354d54698648e2 ("perf probe: Generate event name with line number")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: kernel-janitors@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/b71bcb01fa0c7b9778647235c3ab490f699ba278.1659797452.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

geneve: fix TOS inheriting for ipv4

commit b4ab94d6adaa5cf842b68bd28f4b50bc774496bd upstream.

The current code retrieves the TOS field after the lookup
on the ipv4 routing table. The routing process currently
only allows routing based on the original 3 TOS bits, and
not on the full 6 DSCP bits.
As a result the retrieved TOS is cut to the 3 bits.
However for inheriting purposes the full 6 bits should be used.

Extract the full 6 bits before the route lookup and use
that instead of the cut off 3 TOS bits.

Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20220805190006.8078-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

atm: idt77252: fix use-after-free bugs caused by tst_timer

commit 3f4093e2bf4673f218c0bf17d8362337c400e77b upstream.

There are use-after-free bugs caused by tst_timer. The root cause
is that there are no functions to stop tst_timer in idt77252_exit().
One of the possible race conditions is shown below:

    (thread 1)          |        (thread 2)
                        |  idt77252_init_one
                        |    init_card
                        |      fill_tst
                        |        mod_timer(&card->tst_timer, ...)
idt77252_exit           |  (wait a time)
                        |  tst_timer
                        |
                        |    ...
  kfree(card) // FREE   |
                        |    card->soft_tst[e] // USE

The idt77252_dev is deallocated in idt77252_exit() and used in
timer handler.

This patch adds del_timer_sync() in idt77252_exit() in order that
the timer handler could be stopped before the idt77252_dev is
deallocated.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220805070008.18007-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/xenbus: fix return type in xenbus_file_read()

commit 32ad11127b95236dfc52375f3707853194a7f4b4 upstream.

This code tries to store -EFAULT in an unsigned int.  The
xenbus_file_read() function returns type ssize_t so the negative value
is returned as a positive value to the user.

This change forces another change to the min() macro.  Originally, the
min() macro used "unsigned" type which checkpatch complains about.  Also
unsigned type would break if "len" were not capped at MAX_RW_COUNT.  Use
size_t for the min().  (No effect on runtime for the min_t() change).

Fixes: 2fb3683e7b16 ("xen: Add xenbus device driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/YutxJUaUYRG/VLVc@kili
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: ethtool: fix the display error of `ethtool -m DEVNAME`

commit 4ae97cae07e15d41e5c0ebabba64c6eefdeb0bbe upstream.

The port flag isn't set to `NFP_PORT_CHANGED` when using
`ethtool -m DEVNAME` before, so the port state (e.g. interface)
cannot be updated. Therefore, it caused that `ethtool -m DEVNAME`
sometimes cannot read the correct information.

E.g. `ethtool -m DEVNAME` cannot work when load driver before plug
in optical module, as the port interface is still NONE without port
update.

Now update the port state before sending info to NIC to ensure that
port interface is correct (latest state).

Fixes: 61f7c6f44870 ("nfp: implement ethtool get module EEPROM")
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220802093355.69065-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NTB: ntb_tool: uninitialized heap data in tool_fn_write()

commit 45e1058b77feade4e36402828bfe3e0d3363177b upstream.

The call to:

ret = simple_write_to_buffer(buf, size, offp, ubuf, size);

will return success if it is able to write even one byte to "buf".
The value of "*offp" controls which byte.  This could result in
reading uninitialized data when we do the sscanf() on the next line.

This code is not really desigined to handle partial writes where
*offp is non-zero and the "buf" is preserved and re-used between writes.
Just ban partial writes and replace the simple_write_to_buffer() with
copy_from_user().

Fixes: 578b881ba9c4 ("NTB: Add tool test client")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools build: Switch to new openssl API for test-libcrypto

commit 5b245985a6de5ac18b5088c37068816d413fb8ed upstream.

Switch to new EVP API for detecting libcrypto, as Fedora 36 returns an
error when it encounters the deprecated function MD5_Init() and the others.

The error would be interpreted as missing libcrypto, while in reality it is
not.

Fixes: 6e8ccb4f624a73c5 ("tools/bpf: properly account for libbfd variations")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: llvm@lists.linux.dev
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220719170555.2576993-4-roberto.sassu@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: dummy-tools: avoid tmpdir leak in dummy gcc

commit aac289653fa5adf9e9985e4912c1d24a3e8cbab2 upstream.

When passed -print-file-name=plugin, the dummy gcc script creates a
temporary directory that is never cleaned up. To avoid cluttering
$TMPDIR, instead use a static directory included in the source tree.

Fixes: 76426e238834 ("kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: don't leak snap_rwsem in handle_cap_grant

commit 58dd4385577ed7969b80cdc9e2a31575aba6c712 upstream.

When handle_cap_grant is called on an IMPORT op, then the snap_rwsem is
held and the function is expected to release it before returning. It
currently fails to do that in all cases which could lead to a deadlock.

Fixes: 6f05b30ea063 ("ceph: reset i_requested_max_size if file write is not wanted")
Link: https://tracker.ceph.com/issues/55857
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/vm/slabinfo: use alphabetic order when two values are equal

commit 4f5ceb8851f0081af54313abbf56de1615911faf upstream.

When the number of partial slabs in each cache is the same (e.g., the
value are 0), the results of the `slabinfo -X -N5` and `slabinfo -P -N5`
are different.

/ # slabinfo -X -N5
...
Slabs sorted by number of partial slabs
---------------------------------------
Name                   Objects Objsize           Space Slabs/Part/Cpu  O/S O %Fr %Ef Flg
inode_cache              15180     392         6217728        758/0/1   20 1   0  95 a
kernfs_node_cache        22494      88         2002944        488/0/1   46 0   0  98
shmem_inode_cache          663     464          319488         38/0/1   17 1   0  96
biovec-max                  50    3072          163840          4/0/1   10 3   0  93 A
dentry                   19050     136         2600960        633/0/2   30 0   0  99 a

/ # slabinfo -P -N5
Name                   Objects Objsize           Space Slabs/Part/Cpu  O/S O %Fr %Ef Flg
bdev_cache                  32     984           32.7K          1/0/1   16 2   0  96 Aa
ext4_inode_cache            42     752           32.7K          1/0/1   21 2   0  96 a
dentry                   19050     136            2.6M        633/0/2   30 0   0  99 a
TCPv6                       17    1840           32.7K          0/0/1   17 3   0  95 A
RAWv6                       18     856           16.3K          0/0/1   18 2   0  94 A

This problem is caused by the sort_slabs().  So let's use alphabetic order
when two values are equal in the sort_slabs().

By the way, the content of the `slabinfo -h` is not aligned because the

`-P|--partial Sort by number of partial slabs`

uses tabs instead of spaces.  So let's use spaces instead of tabs to fix
it.

Link: https://lkml.kernel.org/r/20220528063117.935158-1-songyuanzheng@huawei.com
Fixes: 1106b205a3fe ("tools/vm/slabinfo: add partial slab listing to -X")
Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: use correct index when encoding client supported features

commit fea013e020e6ecc7be75bea0d61697b7e916b44d upstream.

Feature bits have to be encoded into the correct locations.  This hasn't
been an issue so far because the only hole in the feature bits was in bit
10 (CEPHFS_FEATURE_RECLAIM_CLIENT), which is located in the 2nd byte.  When
adding more bits that go beyond the this 2nd byte, the bug will show up.

[xiubli: remove incorrect comment for CEPHFS_FEATURES_CLIENT_SUPPORTED]

Fixes: 9ba1e224538a ("ceph: allocate the correct amount of extra bytes for the session features")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: dt-bindings: zynqmp-qspi: add missing 'required'

commit acfc34f008c3e66bbcb7b9162c80c8327b6e800f upstream.

During the conversion the bindings lost list of required properties.

Fixes: c58db2abb19f ("spi: convert Xilinx Zynq UltraScale+ MPSoC GQSPI bindings to YAML")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220704130618.199231-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: dt-bindings: cadence: add missing 'required'

commit 6eee27c598fde65988723b785a9c9192d5ffb93a upstream.

During the conversion the bindings lost list of required properties.

Fixes: aa7968682a2b ("spi: convert Cadence SPI bindings to YAML")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220704130618.199231-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources

commit 2b4e75a7a7c8d3531a40ebb103b92f88ff693f79 upstream.

Add additional GCC clock sources. This includes PCIe and USB PIPE and
UFS symbol clocks.

Fixes: 2a8aa18c1131 ("dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-2-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: arm: qcom: fix MSM8994 boards compatibles

commit c704bd373f58a84193eebe40bd271d6b73c138b0 upstream.

The compatibles for APQ8094/MSM8994 boards are different than specified
in bindings.  None of them use fallback to other SoC variant.

Fixes: 9ad3c08f6f1b ("dt-bindings: arm: qcom: Document sony boards for apq8094")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220520123252.365762-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: arm: qcom: fix MSM8916 MTP compatibles

commit bb35fe1efbae4114bd288fae0f56070f563adcfc upstream.

The order of compatibles for MSM8916 MTP board is different:

  msm8916-mtp.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
    ['qcom,msm8916-mtp', 'qcom,msm8916-mtp/1', 'qcom,msm8916'] is too long

Fixes: 9d3ef77fe568 ("dt-bindings: arm: Convert QCom board/soc bindings to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220520123252.365762-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: arm: qcom: fix Longcheer L8150 compatibles

commit 25d203d0751ca191301bc578ba5d59fa401f1fbf upstream.

The MSM8916 Longcheer L8150 uses a fallback in compatible:

  msm8916-longcheer-l8150.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
    ['longcheer,l8150', 'qcom,msm8916-v1-qrd/9-v1', 'qcom,msm8916'] is too long

Fixes: b72160fa886d ("dt-bindings: qcom: Document bindings for new MSM8916 devices")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220520123252.365762-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: gpio: zynq: Add missing compatible strings

commit 7668048e5c697a9493ffc0e6001c322b2efe90ae upstream.

"xlnx,zynqmp-gpio-1.0", "xlnx,versal-gpio-1.0" and "xlnx,pmc-gpio-1.0"
compatible strings were not moved to yaml format. But they were in origin
text file.

Fixes: 45ca16072b70 ("dt-bindings: gpio: zynq: convert bindings to YAML")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/72c973da5670b5ae81d050c582948894ee4174f8.1634206453.git.michal.simek@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock: Set socket state back to SS_UNCONNECTED in vsock_connect_timeout()

commit a3e7b29e30854ed67be0d17687e744ad0c769c4b upstream.

Imagine two non-blocking vsock_connect() requests on the same socket.
The first request schedules @connect_work, and after it times out,
vsock_connect_timeout() sets *sock* state back to TCP_CLOSE, but keeps
*socket* state as SS_CONNECTING.

Later, the second request returns -EALREADY, meaning the socket "already
has a pending connection in progress", even though the first request has
already timed out.

As suggested by Stefano, fix it by setting *socket* state back to
SS_UNCONNECTED, so that the second request will return -ETIMEDOUT.

Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock: Fix memory leak in vsock_connect()

commit 7e97cfed9929eaabc41829c395eb0d1350fccb9d upstream.

An O_NONBLOCK vsock_connect() request may try to reschedule
@connect_work.  Imagine the following sequence of vsock_connect()
requests:

  1. The 1st, non-blocking request schedules @connect_work, which will
     expire after 200 jiffies.  Socket state is now SS_CONNECTING;

  2. Later, the 2nd, blocking request gets interrupted by a signal after
     a few jiffies while waiting for the connection to be established.
     Socket state is back to SS_UNCONNECTED, but @connect_work is still
     pending, and will expire after 100 jiffies.

  3. Now, the 3rd, non-blocking request tries to schedule @connect_work
     again.  Since @connect_work is already scheduled,
     schedule_delayed_work() silently returns.  sock_hold() is called
     twice, but sock_put() will only be called once in
     vsock_connect_timeout(), causing a memory leak reported by syzbot:

  BUG: memory leak
  unreferenced object 0xffff88810ea56a40 (size 1232):
    comm "syz-executor756", pid 3604, jiffies 4294947681 (age 12.350s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      28 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  (..@............
    backtrace:
      [<ffffffff837c830e>] sk_prot_alloc+0x3e/0x1b0 net/core/sock.c:1930
      [<ffffffff837cbe22>] sk_alloc+0x32/0x2e0 net/core/sock.c:1989
      [<ffffffff842ccf68>] __vsock_create.constprop.0+0x38/0x320 net/vmw_vsock/af_vsock.c:734
      [<ffffffff842ce8f1>] vsock_create+0xc1/0x2d0 net/vmw_vsock/af_vsock.c:2203
      [<ffffffff837c0cbb>] __sock_create+0x1ab/0x2b0 net/socket.c:1468
      [<ffffffff837c3acf>] sock_create net/socket.c:1519 [inline]
      [<ffffffff837c3acf>] __sys_socket+0x6f/0x140 net/socket.c:1561
      [<ffffffff837c3bba>] __do_sys_socket net/socket.c:1570 [inline]
      [<ffffffff837c3bba>] __se_sys_socket net/socket.c:1568 [inline]
      [<ffffffff837c3bba>] __x64_sys_socket+0x1a/0x20 net/socket.c:1568
      [<ffffffff84512815>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
      [<ffffffff84512815>] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80
      [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
  <...>

Use mod_delayed_work() instead: if @connect_work is already scheduled,
reschedule it, and undo sock_hold() to keep the reference count
balanced.

Reported-and-tested-by: syzbot+b03f55bf128f9a38f064@syzkaller.appspotmail.com
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Co-developed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

plip: avoid rcu debug splat

commit bc3c8fe3c79bcdae4d90e3726054fac5cca8ac32 upstream.

WARNING: suspicious RCU usage
5.2.0-rc2-00605-g2638eb8b50cfc #1 Not tainted
drivers/net/plip/plip.c:1110 suspicious rcu_dereference_check() usage!

plip_open is called with RTNL held, switch to the correct helper.

Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20220807115304.13257-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: do not use RT_TOS for IPv6 flowlabel

commit ab7e2e0dfa5d37540ab1dc5376e9a2cb9188925d upstream.

According to Guillaume Nault RT_TOS should never be used for IPv6.

Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.

But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.

Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx5: do not use RT_TOS for IPv6 flowlabel

commit bcb0da7fffee9464073998b267ce5543da2356d2 upstream.

According to Guillaume Nault RT_TOS should never be used for IPv6.

Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.

But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.

Fixes: ce99f6b97fcd ("net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

geneve: do not use RT_TOS for IPv6 flowlabel

commit ca2bb69514a8bc7f83914122f0d596371352416c upstream.

According to Guillaume Nault RT_TOS should never be used for IPv6.

Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.

But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.

Fixes: 3a56f86f1be6 ("geneve: handle ipv6 priority like ipv4 tos")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool

commit 85140ef275f577f64e8a2c5789447222dfc14fc4 upstream.

The value acpi_add_nondev_subnodes() returns is bool so change the return
type of the function to match that.

Fixes: 445b0eb058f5 ("ACPI / property: Add support for data-only subnodes")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-af: Fix key checking for source mac

commit c3c290276927a3ae79342a4e17ec0500c138c63a upstream.

Given a field with its location/offset in input packet,
the key checking logic verifies whether extracting the
field can be supported or not based on the mkex profile
loaded in hardware. This logic is wrong wrt source mac
and this patch fixes that.

Fixes: 9b179a960a96 ("octeontx2-af: Generate key field bit mask from KEX profile")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-af: Fix mcam entry resource leak

commit 3f8fe40ab7730cf8eb6f8b8ff412012f7f6f8f48 upstream.

The teardown sequence in FLR handler returns if no NIX LF
is attached to PF/VF because it indicates that graceful
shutdown of resources already happened. But there is a
chance of all allocated MCAM entries not being freed by
PF/VF. Hence free mcam entries even in case of detached LF.

Fixes: c554f9c1574e ("octeontx2-af: Teardown NPA, NIX LF upon receiving FLR")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-af: suppress external profile loading warning

commit cf2437626502b5271d19686b03dea306efe17ea0 upstream.

The packet parser profile supplied as firmware may not
be present all the time and default profile is used mostly.
Hence suppress firmware loading warning from kernel due to
absence of firmware in kernel image.

Fixes: 3a7244152f9c ("octeontx2-af: add support for custom KPU entries")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-af: Apply tx nibble fixup always

commit dd1d1a8a6b29b6b472fd0d449b29eb806c411dd2 upstream.

NPC_PARSE_NIBBLE for TX interface has to be equal to the RX one for some
silicon revisions. Mistakenly this fixup was only applied to the default
MKEX profile while it should also be applied to any loaded profile.

Fixes: 1c1935c9945d ("octeontx2-af: Add NIX1 interfaces to NPC")
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-pf: Fix NIX_AF_TL3_TL2X_LINKX_CFG register configuration

commit 13c9f4dc102f2856e80b92486c41841e25e23772 upstream.

For packets scheduled to RPM and LBK, NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
selects the TL3 or TL2 scheduling level as the one used for link/channel
selection and backpressure. For each scheduling queue at the selected
level: Setting NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG[ENA] = 1 allows
the TL3/TL2 queue to schedule packets to a specified RPM or LBK link
and channel.

There is an issue in the code where NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
is set to TL3 where as the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG is
configured for TL2 queue in some cases. As a result packets will not
transmit on that link/channel. This patch fixes the issue by configuring
the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG register depending on the
NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] value.

Fixes: caa2da34fd25a ("octeontx2-pf: Initialize and config queues")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20220802142813.25031-1-naveenm@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>