ASoC: codecs: Add awinic AW88261 audio amplifier

Merge series from wangweidong.a@awinic.com:

The awinic AW88261 is an I2S/TDM input, high efficiency digital Smart K
audio amplifier.

ASoC: SoundWire codecs: improve pm_runtime handling

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

This patchset improves the pm_runtime behavior in rare corner cases
identified by the Intel CI in the last 6 months.

a) in stress-tests, it's not uncommon to see the following type of
warnings when the codec reports as ATTACHED

    "rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
    sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"

This warning was not correlated with any functional issue, but it
exposed a design issue on when to enable pm_runtime. The recommended
practice in the pm_runtime documentation is to keep the devices in
'suspended' mode and mark them as 'active' when they are really
functional.

b) enabling pm_runtime when the codec reports as ATTACHED also creates
a problematic case when the ASoC pm_runtime_get_sync() will silently
fail due to the -EACCESS error handling. This can happen when playback
starts before the codec is enumerated.

This patchset modifies the initial stages so that codecs are
pm_runtime enabled in the .probe() callback, but become pm_runtime
'active' only when they report present. This is better aligned with
the design of the pm_runtime helpers and improved CI results
significantly.

This patchset modifies all existing SoundWire codecs (except Qualcomm
ones), but the pattern of changes is exactly the same in all patches.

ASoC: codecs: Add aw88261 amplifier driver

Add i2c and amplifier registration for
aw88261 and their associated operation functions.

Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230804114749.215460-4-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: Add code for bin parsing compatible with aw88261

Add aw88261 compatible code to the aw88395_lib.c file
so that it can parse aw88261's bin file.

Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230804114749.215460-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: Add schema for "awinic,aw88261"

Add the awinic,aw88261 property to the awinic,aw88395.yaml file.

Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230804114749.215460-2-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: jz4740: Update to use maple tree register cache

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the jz4740 driver to use the more modern data structure.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-jz-maple-v1-1-3f745adf96e5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: max9892x: Reformat to coding style

Reformat the code to match Linuxn coding style: re-indent continued
lines and stop too-early line wrapping, drop unneeded {} brackets.  No
functional impact.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: max9892x: Unify interleave mode OF property

MAX98926 and MAX98927 are quite similar and use the same bindings,
although drivers were not implementing them in the same way:
MAX98926 has boolean "interleave-mode" but MAX98927 has uint32
"interleave_mode".  Unify them under maxim,interleave-mode, already used
in other Maxim device.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: Convert maxim,max98925 to DT schema

Convert the Maxim Integrated MAX98925/MAX98926/MAX98927 speaker
amplifier bindings to DT schema format.  Changes during conversion:
1. Add "sound-dai-cells", already used by DTS.
2. Use "maxim,interleave-mode" instead previous "interleave-mode" and
   undocumented but used interleave_mode.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98373-sdw: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98363: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5682-sdw: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1318-sdw: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1316-sdw: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1308-sdw: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt715-sdca: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt715: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt712-sdca-dmic: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1712-sdca: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt700: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt711-sdca: enable pm_runtime in probe, keep status as 'suspended'

In stress cases involving module insertion/removal followed by
playback/capture, it can happen that capture/playback is started
before the codec enumeration completes.

The codec driver registers its components with the ASoC framework
during the probe stage, so there is currently no way for the card
creation to wait for the codec enumeration/initialization to complete.

In addition, when the capture/playback starts, the ASoC framework uses
pm_runtime_get_sync() to properly refcount and power-manage
devices. This is problematic in the SoundWire case because pm_runtime
is enabled during the enumeration/initialization stage, so
pm_runtime_get_sync() will return -EACCESS which is
ignored. Additional errors will happen when setting the pm_runtime
status as 'active' because the parent is not properly resumed,
resulting in an error such as:

"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"

This patch suggests enabling pm_runtime during the probe, but marking
the device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt711: enable pm_runtime in probe, keep status as 'suspended'

In stress cases involving module insertion/removal followed by
playback/capture, it can happen that capture/playback is started
before the codec enumeration completes.

The codec driver registers its components with the ASoC framework
during the probe stage, so there is currently no way for the card
creation to wait for the codec enumeration/initialization to complete.

In addition, when the capture/playback starts, the ASoC framework uses
pm_runtime_get_sync() to properly refcount and power-manage
devices. This is problematic in the SoundWire case because pm_runtime
is enabled during the enumeration/initialization stage, so
pm_runtime_get_sync() will return -EACCESS which is
ignored. Additional errors will happen when setting the pm_runtime
status as 'active' because the parent is not properly resumed,
resulting in an error such as:

"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"

This patch suggests enabling pm_runtime during the probe, but marking
the device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5682-sdw: make regmap cache-only in probe

The RT5682 needs specific attention: there are two regmap in
rt5682_priv struct, one is sdw_regmap which is for IO transfer, and
the other is used for registers control.

We need to set both regmaps when we set cache only. Because if we set
rt5682->sdw_regmap only, rt5682->regmap won't set/get the right value
when it call regmap_write/read(rt5682->sdw_regmap, ...). If we set
rt5682->regmap only, regmap_write(rt5682->sdw_regmap, ...) is used
in rt5682_clock_config which will be called by the ..bus_config ops.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SoundWire codecs: make regmap cache-only in probe

The SoundWire bus may start after the probe where the SoundWire ASoC
components are registered. This creates a time window where the card
can be created and the registers be accessed.

As discussed on the mailing list, we can't really control when codecs
are enumerated and initialized, but we can make sure the access to the
codecs is cached until the hardware is accessible.

This patch configures regcache_cache_only() with a 'true' parameter in
the probe function, and a 'false' parameter in the io_init routine.

The rt5682 is handled through a different patch due to its specific
cache handling.

Link: https://lore.kernel.org/alsa-devel/20230503144102.242240-1-krzysztof.kozlowski@linaro.org/
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SoundWire codecs: return error status in probe

For some reason the first batch of SoundWire codec drivers squelch
errors in the SoundWire probe callback.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ti: davinci-evm: simplify the code with module_platform_driver

The init/exit() of driver only calls platform_driver_register/unregister,
it can be simpilfied with module_platform_driver.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230804085402.1328033-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8960: Add support for the power supplies

WM8960 has the following power supplies:

- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD1

Add support for them.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803215506.142922-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: wlf,wm8960: Describe the power supplies

WM8960 has the following power supplies:

- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD1

Add them to bindings to improve the hardware description.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803215506.142922-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: mediatek: mt8186 modify dram type as non-cache

To prevent incorrect access between the host and DSP sides, we need to
modify DRAM as a non-cache memory type. Additionally, we can retrieve
the size of shared DMA from the device tree.

Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Kuan-Hsun Cheng <Allen-KH.Cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230803075028.32170-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-acpi: Add missing kernel doc

The UID field in snd_soc_acpi_link_adr is not documented, add kernel doc
for it.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803162312.117771-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt8186: Remove unused mutex.

The mutex mutex_request_dram has no user.

Remove mutex_request_dram.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230803083908.9DxbPvOK@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_micfil: Use SET_SYSTEM_SLEEP_PM_OPS to simplify PM

Use SET_SYSTEM_SLEEP_PM_OPS to simplify suspend and resume function.
fsl_micfil_suspend() and fsl_micfil_resume() can be deleted.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230802052117.1293029-4-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_micfil: Add fsl_micfil_use_verid function

fsl_micfil_use_verid() can help to parse the version info in VERID and
PARAM registers. Since the two registers are added only on i.MX93
platform, a member flag called use_verid is introduced to soc data
structure which indicates acquiring MICFIL version.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230802052117.1293029-3-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_micfil: Add new registers and new bit definition

MICFIL IP is upgraded on i.MX93 platform. These new registers and new
bit definition are added to complete the register list.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230802052117.1293029-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: machine driver updates for 6.6

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Lots of small cleanups coming from Bard Liao and Charles Keepax for
SoundWire platforms, and minor additions for RVPs and Chromebooks.

ASoC/SOF/Intel/AMD: cleanups for GCC11 -fanalyzer

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

GCC11 provides an '-fanalyzer' static analysis option which does not
provide too many false-positives. This patch cleans-up known
problematic code paths to help enable this capability in CI. We've
used this for about a month already.

ASoC: SOF: Deprecate invalid enums in IPC3

The switch component was never completed and sat half empty for over 3
years. It was recently deleted. For modern components this would
require not change in the kernel but since this was a legacy allocation
from the enum days of IPC3 we should mark the respective enum as
deprecated.

The splitter component was never even got a source file in the firmware.
Therefore also delete it since this is not needed.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc3: update dai_link_fixup for SOF_DAI_MEDIATEK_AFE

For MediaTek AFE, DAI DMA can support different bitwidths compared to
the BE DAI. Therefore, it is preferable to obtain the BE frame format
from the DAI_CONFIG.

Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-acpi: improve log messagesin link_slaves_found()

use 'part_id' to follow MIPI/SoundWire wording and use more consistent
%#x format.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-acpi: move link_slaves_found()

Move existing function in common library to make sure the code can be
reused by other SoC vendors.

No functionality change outside of the move and added prefix.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: start simplify the signature of link_slaves_found()

Start removing Intel-specific arguments to make that function usable
by other SOC vendors.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Move group_generated logic

Hoist the handling logic for group_generated up to the
sof_card_dai_links_create level. This avoids the need to pass the array
through multiple levels of functions.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Merge codec_conf_alloc into dailink_info

Rename get_sdw_dailink_info to simply get_dailink_info and have it also
return the number of codecs present. Then hoist the allocation of the
codec conf structure up into sof_card_dai_links_create. This saves an
extra loop through the adr_link array, allows us to get rid of
sof_card_codec_conf_alloc and makes the allocation more explicit.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Clean up DAI link counting

The counting of each of the types of DAI link is a bit messy with things
added onto an intermediate variable as it goes along. Re-order things a
little to keep the order consistent with the rest of the function and
simplify the process down to a variable for each type of DAI and then
sum them at the end.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: add cs35l56 codec info

Add cs35l56 support in sof_sdw machine driver.

Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Allow direct specification of CODEC name

Add support for MFD based CODEC drivers, by allowing the CODEC name to
not be the SoundWire device directly.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: break earlier when a adr link contains different codecs

create_codec_dai_name() is used to create codec component's information
in different adr links. We can and should break before we do anything.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Move amp_num initialisation to mc_probe

The amp_num member of the info struct is zeroed at the start of
sof_card_dai_links_create, but then summed in mc_probe after
sof_card_dai_links_create is called. It is a little clearer to hoist the
initialisation out of sof_card_dai_links_create so it is on the same
level as the summation.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Remove redundant parameters in dai creation

Pull the device and mach struct out of the card rather than explicitly
passing to sof_card_dai_links_create.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Minor tidy up of mc_probe

Shuffle things around to group operations a little more, and
consistently use card->dev.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Constify parameter to find_codec_part_info

The address passed to find_codec_part_info should be const.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Simplify find_codec_info_acpi

Use a return rather than a break and an additional range check.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Use a module device table

A module device table is generally preferred over hard coding a
MODULE_ALIAS.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Remove some extra line breaks

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Rename codec_idx to codec_dlc_index

Having two local variables called codec_idx and codec_index, that refer
to different things is a little confusing. Rename codec_idx to
codec_dlc_index to indicate it points into the dai_link_component array.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_sdw: Use consistent variable naming for links

The driver makes extensive use of both ACPI link and ASoC DAI link
structs, often referring to both with the variable name link. Make the
code a little easier to follow by consistently using adr_link for the
ACPI bits and dai_links for the ASoC bits.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: add support for SKU 0AFE

Yet another missing configuration, with the standard configuration

link0: rt711-sdca
link 1 and 2: rt1316-sdca
link3: rt714-sdca

Link: https://github.com/thesofproject/sof/issues/7799
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: rename link_id to be_id

The link_id parameter in create_sdw_dailink is actually the BE link id.
Rename it to be_id to be consistent with the caller and less confusion.
No functionality change.

Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: allow mockup amplifier to provide feedback

The capture setting are missing and preventing topologies with
feedback from loading.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: reorder SoundWire codecs in Kconfig

No functionality change, just sort Realtek codecs using increasing
part IDs.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: Update BT offload config for soundwire config

For soundwire config, SSP1 is used for BT offload. This is enabled
in sof_sdw_quirk_table

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_rt5682 add support for HDMI_In capture

Adding support for 2 streams of HDMI-In capture via I2S with rt5682s
codec variant

Reviewed-by: CBM <balamurugan.c@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: apoorv <apoorv@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_rt5682: add RPL support for MAX98357A speaker

Adding support back to RPL devices that lost audio after the RPL/ADL
split. The hardware configuration is:

SSP0: 10EC5682/RTL5682 codec
SSP2: MAX98357A amplifier

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: soc-acpi: Add entry for rt711-sdca-sdw at link 0 in RPL match table

Adding RT711 sdca SDW codec support with SDW0 link for RPL RVP platforms

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: acp5x-mach:add checks to avoid static analysis warnings

snd_soc_card_get_codec_dai() can return NULL, but that value is not
checked for, leading to static analysis warnings.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: atom: remove static analysis false positive

make KCFLAGS='-fanalyzer' sound/soc/intel/atom/ reports a possible
NULL pointer dereference.

sound/soc/intel/atom/sst/sst_stream.c:221:40: error: dereference of
NULL ‘block’ [CWE-476] [-Werror=analyzer-null-dereference]
  221 |                         unsigned char *r = block->data;

This is a false-positive, the GCC analyzer generated that report by
considering if (bytes->block) as true in some cases and false in
others.

We can simplify the code and use a local variable so that static
analysis does not try to look for cases where bytes->block can be
modified concurrently.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bdw_rt286: add checks to avoid static analysis warnings

snd_soc_card_get_codec_dai() can return NULL, but that value is not
checked for, leading to false-positive static analysis warnings

sound/soc/intel/boards/bdw_rt286.c:190:16: error: dereference of NULL
‘codec_dai’ [CWE-476] [-Werror=analyzer-null-dereference]

  190 |         return snd_soc_component_set_jack(codec_dai->component, NULL, NULL);
      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  ‘card_suspend_pre’: event 1
    |
    |  190 |         return snd_soc_component_set_jack(codec_dai->component, NULL, NULL);
    |      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    |      |                |
    |      |                (1) dereference of NULL ‘codec_dai’

This NULL dereference cannot happen, the codec-dai "rt286-aif1" must exists
otherwise the card would not be created. Static analysis cannot know
that however so we might as well squelch this report.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: mediatek: remove error checks on NULL ipc

mtk_adsp_ipc_get_data() can return NULL, but the value is not checked
before being used, leading to static analysis warnings.

sound/soc/sof/mediatek/mt8195/mt8195.c:90:32: error: dereference of
NULL ‘0’ [CWE-476] [-Werror=analyzer-null-dereference]

   90 |         spin_lock_irqsave(&priv->sdev->ipc_lock, flags);
      |                            ~~~~^~~~~~

It appears this is not really a possible problem, so remove those checks.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: imx: remove error checks on NULL ipc

imx_dsp_get_data() can return NULL, but the value is not checked
before being usd, leading to static analysis warnings.

sound/soc/sof/imx/imx8.c:85:32: error: dereference of NULL ‘0’
[CWE-476] [-Werror=analyzer-null-dereference]

   85 |         spin_lock_irqsave(&priv->sdev->ipc_lock, flags);
      |                            ~~~~^~~~~~

It appears this is not really a possible problem, so remove those checks.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: topology: simplify code to prevent static analysis warnings

make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports a possible NULL
pointer dereference.

sound/soc/sof/topology.c:1136:21: error: dereference of NULL ‘w’
[CWE-476] [-Werror=analyzer-null-dereference]

 1136 |     strcmp(w->sname, rtd->dai_link->stream_name))

The code is rather confusing and can be simplified to make static
analysis happy. No functionality change.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc3: add checks to prevent static analysis warnings

make KCFLAGS='-fanalyzer' sound/soc/sof/ reports an issue with memcpy:

sound/soc/sof/ipc3.c: In function ‘ipc3_wait_tx_done’:
sound/soc/sof/ipc3.c:309:33: error: use of NULL ‘reply_data’ where
non-null expected [CWE-476] [-Werror=analyzer-null-argument]

  309 |                        memcpy(reply_data, msg->reply_data,
      |                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  310 |                               msg->reply_size);

The finding is legit with this call:
    return sof_ipc3_tx_msg(sdev, &pm_ctx, sizeof(pm_ctx), NULL, 0, false);

Static analysis has no way of knowing that the reply will be zero-sized.

Add a check to only do the memcpy if the reply size is not zero and
the destination pointer is not NULL.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: sof-client-probes-ipc4: add checks to prevent static analysis warnings

make KCFLAGS='-fanalyzer' sound/soc/sof/ reports several NULL pointer
dereference paths.

sof_ipc4_probe_get_module_info() can return a NULL value, but it's
only tested in the init state. Static analyzers cannot know the probe
state machine and hence flags a potential issue for all calls of that
function.

Squelch these errors by adding the same check consistently.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8960: Clocking tweaks

Merge series from Mark Brown <broonie@kernel.org>:

A couple of minor clocking improvements that make the wm8960 driver work
a bit better with generic cards.

ASoC: Intel: maxim-common: get codec number from ACPI table

We implement a helper function to get number of codecs from ACPI
subsystem instead of using quirk flag in machine driver. Also refactor
module interface by adding max_98390_dai_link() function.

On the sof_rt5682 machine driver side, we remove the quirk flag
SOF_MAX98390_TWEETER_SPEAKER_PRESENT and use the new interface of
max98390 to setup dai link.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731103419.2536036-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: add multi Component support

Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

These are part of "ASoC: add multi Component support" patch-set.
The patch-set supports below case as "2 Cards".

+-- basic board --------+
|+--------+             |
|| CPU ch0| <--> CodecA |
||     ch1| <-+         |
|+--------+   |         |
+-------------|---------+
+-- expansion board ----+
|             |         |
|             +-> CodecB|
+-----------------------+

Renesas sound driver and its Doc part were held for observation.
Rob mentioned that "definitions" vs "$defs". But I got error on "$defs",
no error on "definitions". I believe this change is not mandatory.

He also mentioned that "reg" is missing, but I also believe that "reg"
is automatically handled somehow/somewhere (I'm not sure detail, but other
reviewer indicated it before).

He also mentioned that "ports" and "port", but added new "ports" needs
special handling. Using "ports" vs "port" are different, not
compatible on this driver. This means we need both on Doc.

Thus, there is no update for these.

ASoC: wm8960: Make automatic the default clocking mode

The wm8960 driver supports an automatic clocking mode which will use the
MCLK directly where possible and fall back to the PLL if there is no
suitable configuration directly using the MCLK.  Clock 0 will be used by
the generic cards when configuring things, currently this is a MCLK only
mode but using AUTO mode would be more functional.  Since the driver
still prefers to use MCLK directly where possible there should be no
negative impact on systems which are able to use MCLK directly.

As far as I can see nothing is using the system clock as part of the
ABI, the only reference I can see to a mode in a machine driver is the
Freescale i.MX card which uses the automatic mode with an explicit in
kernel call using the constant so will be unaffected.

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230731-asoc-wm8960-clk-v1-2-69f9ffa2b10a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8960: Read initial MCLK rate from clock API

When we have a MCLK provided by the clock API read the rate at startup
and store it so that there's something set before the machine driver has
done clocking configuration (eg, if it only configures clocking based on
sample rate).

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230731-asoc-wm8960-clk-v1-1-69f9ffa2b10a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: sound: gtm601: convert to YAML

Convert GTM601 binding to the YAML format.

Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730191742.117013-1-david@ixit.cz
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: renesas,rsnd.yaml: enable multi ports for multi Component support

To enable multi Component support, "multi ports" is needed for Audio Graph
Card/Card2, and "multi rcar_sound,dai" is needed for Simple Audio Card.
This patch enable these.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0oyb1li.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: renesas,rsnd.yaml: add common port-def

renesas,rsnd uses both "ports" has "port", and these are very similar.
To avoid duplicated definitions, this patch adds common port-def.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sf9eb1ln.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: enable multi Component support for Audio Graph Card/Card2

+-- Basic Board ---------+
|+--------+      +------+|
|| CPU ch0| <--> |CodecA||
||     ch1| <-+  +------+|
|+--------+   |          |
+-------------|----------+
+-- expansion board -----+
|             |  +------+|
|             +->|CodecB||
|                +------+|
+------------------------+

In above HW connection case, we intuitively think we want to handle these
as "2 Sound Cards".

card0,0: CPU-ch0 - CodecA
card1,0: CPU-ch1 - CodecB

But, we needed to handle it as "1 big Sound Card", because of
Component vs Card limitation.

card0,0: CPU-ch0 - CodecA
card0,1: CPU-ch1 - CodecB

This patch enables multi Component to handle multi Cards.
To support it, it needs

- Fill dai_args for each DAI on snd_soc_dai_driver
- Parse DT for each Component (Simple Card/Audio Graph Card)

Ex) Simple Card

rcar_sound {
...

/* Component0 */
rcar_sound,dai@0 {
...
};

/* Component1 */
rcar_sound,dai@1 {
...
};
};

Ex) Audio Graph Card/Card2

rcar_sound {
/* Component0 */
ports@0 {
...
};

/* Component1 */
ports@1 {
...
};
};

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tttub1m4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: cleanup rsnd_dai_of_node()

It calls rsnd_dai_of_node() to know it was called from Audio Graph
Card/Card2, or from Simple Audio Card. And after that, it gets
number of related DAIs.

To be more simple code, this patch merges these.
This is prepare for multi Component support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8eab1md.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: use DAI driver ID instead of DAI ID

Current rsnd is using DAI ID to get own priv data without setting
driver->id. It was no problem for Single Component, but will be problem
in case of Multi Component, because it is not a DAI serial number.

struct snd_soc_dai *snd_soc_register_dai(...)
{
...
if (dai_drv->id)
dai->id = dai_drv->id;
else
dai->id = component->num_dai;
...
}

This patch sets driver->id, and get serial number.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wmyqb1mm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Merge up fixes from Linus' tree

Gets us pine64plus back if nothing else.

Linux 6.5-rc4

Merge tag 'spi-fix-v6.5-rc3' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A bunch of fixes for the Qualcomm QSPI driver, fixing multiple issues
  with the newly added DMA mode - it had a number of issues exposed when
  tested in a wider range of use cases, both race condition style issues
  and issues with different inputs to those that had been used in test"

* tag 'spi-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized reads
  spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes
  spi: spi-qcom-qspi: Add DMA_CHAIN_DONE to ALL_IRQS
  spi: spi-qcom-qspi: Call dma_wmb() after setting up descriptors
  spi: spi-qcom-qspi: Use GFP_ATOMIC flag while allocating for descriptor
  spi: spi-qcom-qspi: Ignore disabled interrupts' status in isr

Merge tag 'regulator-fix-v6.5-rc3' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A couple of small fixes for the the mt6358 driver, fixing error
  reporting and a bootstrapping issue"

* tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: mt6358: Fix incorrect VCN33 sync error message
  regulator: mt6358: Sync VCN33_* enable status after checking ID

Merge tag 'usb-6.5-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a set of USB driver fixes for 6.5-rc4. Include in here are:

   - new USB serial device ids

   - dwc3 driver fixes for reported issues

   - typec driver fixes for reported problems

   - gadget driver fixes

   - reverts of some problematic USB changes that went into -rc1

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  usb: misc: ehset: fix wrong if condition
  usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
  usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
  usb: gadget: call usb_gadget_check_config() to verify UDC capability
  usb: typec: Use sysfs_emit_at when concatenating the string
  usb: typec: Iterate pds array when showing the pd list
  usb: typec: Set port->pd before adding device for typec_port
  usb: typec: qcom: fix return value check in qcom_pmic_typec_probe()
  Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"
  Revert "usb: xhci: tegra: Fix error check"
  USB: gadget: Fix the memory leak in raw_gadget driver
  usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate
  Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"
  Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
  USB: quirks: add quirk for Focusrite Scarlett
  usb: xhci-mtk: set the dma max_seg_size
  MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail
  usb: dwc3: don't reset device side if dwc3 was configured as host-only
  usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()
  usb: ohci-at91: Fix the unhandle interrupt when resume
  ...

Merge tag 'tty-6.5-rc4' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and serial driver fixes for 6.5-rc4 for some
  reported problems. Included in here is:

   - TIOCSTI fix for braille readers

   - documentation fix for minor numbers

   - MAINTAINERS update for new serial files in -rc1

   - minor serial driver fixes for reported problems

  All of these have been in linux-next with no reported problems"

* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_dw: Preserve original value of DLF register
  tty: serial: sh-sci: Fix sleeping in atomic context
  serial: sifive: Fix sifive_serial_console_setup() section
  Documentation: devices.txt: reconcile serial/ucc_uart minor numers
  MAINTAINERS: Update TTY layer for lists and recently added files
  tty: n_gsm: fix UAF in gsm_cleanup_mux
  TIOCSTI: always enable for CAP_SYS_ADMIN

Merge tag 'staging-6.5-rc4' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
 "Here are three small staging driver fixes for 6.5-rc4 that resolve
  some reported problems. These fixes are:

   - fix for an old bug in the r8712 driver

   - fbtft driver fix for a spi device

   - potential overflow fix in the ks7010 driver

  All of these have been in linux-next with no reported problems"

* tag 'staging-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()
  staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVER
  staging: r8712: Fix memory leak in _r8712_init_xmit_priv()

Merge tag 'char-misc-6.5-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char driver and Documentation fixes from Greg KH:
 "Here is a char driver fix and some documentation updates for 6.5-rc4
  that contain the following changes:

   - sram/genalloc bugfix for reported problem

   - security-bugs.rst update based on recent discussions

   - embargoed-hardware-issues minor cleanups and then partial revert
     for the project/company lists

  All of these have been in linux-next for a while with no reported
  problems, and the documentation updates have all been reviewed by the
  relevant developers"

* tag 'char-misc-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc/genalloc: Name subpools by of_node_full_name()
  Documentation: embargoed-hardware-issues.rst: add AMD to the list
  Documentation: embargoed-hardware-issues.rst: clean out empty and unused entries
  Documentation: security-bugs.rst: clarify CVE handling
  Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group

Merge tag 'probes-fixes-v6.5-rc3' of git://git./linux/kernel/git/trace/linux-trace

Pull probe fixes from Masami Hiramatsu:

 - probe-events: add NULL check for some BTF API calls which can return
   error code and NULL.

 - ftrace selftests: check fprobe and kprobe event correctly. This fixes
   a miss condition of the test command.

 - kprobes: do not allow probing functions that start with "__cfi_" or
   "__pfx_" since those are auto generated for kernel CFI and not
   executed.

* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobes: Prohibit probing on CFI preamble symbol
  selftests/ftrace: Fix to check fprobe event eneblement
  tracing/probes: Fix to add NULL check for BTF APIs

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "x86:

   - Do not register IRQ bypass consumer if posted interrupts not
     supported

   - Fix missed device interrupt due to non-atomic update of IRR

   - Use GFP_KERNEL_ACCOUNT for pid_table in ipiv

   - Make VMREAD error path play nice with noinstr

   - x86: Acquire SRCU read lock when handling fastpath MSR writes

   - Support linking rseq tests statically against glibc 2.35+

   - Fix reference count for stats file descriptors

   - Detect userspace setting invalid CR0

  Non-KVM:

   - Remove coccinelle script that has caused multiple confusion
     ("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
     usage", acked by Greg)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
  KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
  KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
  KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
  Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
  KVM: selftests: Verify stats fd is usable after VM fd has been closed
  KVM: selftests: Verify stats fd can be dup()'d and read
  KVM: selftests: Verify userspace can create "redundant" binary stats files
  KVM: selftests: Explicitly free vcpus array in binary stats test
  KVM: selftests: Clean up stats fd in common stats_test() helper
  KVM: selftests: Use pread() to read binary stats header
  KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
  selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
  Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
  KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
  KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
  KVM: VMX: Make VMREAD error path play nice with noinstr
  KVM: x86/irq: Conditionally register IRQ bypass consumer again
  KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
  KVM: x86: check the kvm_cpu_get_interrupt result before using it
  KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
  ...

Merge tag 'locking_urgent_for_v6.5_rc4' of git://git./linux/kernel/git/tip/tip

Pull locking fix from Borislav Petkov:

 - Fix a rtmutex race condition resulting from sharing of the sort key
   between the lock waiters and the PI chain tree (->pi_waiters) of a
   task by giving each tree their own sort key

* tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix task->pi_waiters integrity

Merge tag 'x86_urgent_for_v6.5_rc4' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - AMD's automatic IBRS doesn't enable cross-thread branch target
   injection protection (STIBP) for user processes. Enable STIBP on such
   systems.

 - Do not delete (but put the ref instead) of AMD MCE error thresholding
   sysfs kobjects when destroying them in order not to delete the kernfs
   pointer prematurely

 - Restore annotation in ret_from_fork_asm() in order to fix kthread
   stack unwinding from being marked as unreliable and thus breaking
   livepatching

* tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
  x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks
  x86: Fix kthread unwind

Merge tag 'irq_urgent_for_v6.5_rc4' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Borislav Petkov:

 - Work around an erratum on GIC700, where a race between a CPU handling
   a wake-up interrupt, a change of affinity, and another CPU going to
   sleep can result in a lack of wake-up event on the next interrupt

 - Fix the locking required on a VPE for GICv4

 - Enable Rockchip 3588001 erratum workaround for RK3588S

 - Fix the irq-bcm6345-l1 assumtions of the boot CPU always be the first
   CPU in the system

* tag 'irq_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
  irqchip/gic-v3: Enable Rockchip 3588001 erratum workaround for RK3588S
  irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation
  irq-bcm6345-l1: Do not assume a fixed block to cpu mapping

Merge tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
 "Four small SMB3 client fixes:

   - two reconnect fixes (to address the case where non-default
     iocharset gets incorrectly overridden at reconnect with the
     default charset)

   - fix for NTLMSSP_AUTH request setting a flag incorrectly)

   - Add missing check for invalid tlink (tree connection) in ioctl"

* tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add missing return value check for cifs_sb_tlink
  smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request
  cifs: fix charset issue in reconnection
  fs/nls: make load_nls() take a const parameter

Merge tag 'trace-v6.5-rc3' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

 - Fix to /sys/kernel/tracing/per_cpu/cpu*/stats read and entries.

   If a resize shrinks the buffer it clears the read count to notify
   readers that they need to reset. But the read count is also used for
   accounting and this causes the numbers to be off. Instead, create a
   separate variable to use to notify readers to reset.

 - Fix the ref counts of the "soft disable" mode. The wrong value was
   used for testing if soft disable mode should be enabled or disable,
   but instead, just change the logic to do the enable and disable in
   place when the SOFT_MODE is set or cleared.

 - Several kernel-doc fixes

 - Removal of unused external declarations

* tag 'trace-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix warning in trace_buffered_event_disable()
  ftrace: Remove unused extern declarations
  tracing: Fix kernel-doc warnings in trace_seq.c
  tracing: Fix kernel-doc warnings in trace_events_trigger.c
  tracing/synthetic: Fix kernel-doc warnings in trace_events_synth.c
  ring-buffer: Fix kernel-doc warnings in ring_buffer.c
  ring-buffer: Fix wrong stat of cpu_buffer->read

arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS

Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.

Get rid of it mechanically:

   git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
       xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'

Also just remove the AUTOFS4_FS config option stub.  Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.

Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'loongarch-fixes-6.5-1' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Some bug fixes for build system, builtin cmdline handling, bpf and
  {copy, clear}_user, together with a trivial cleanup"

* tag 'loongarch-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Cleanup __builtin_constant_p() checking for cpu_has_*
  LoongArch: BPF: Fix check condition to call lu32id in move_imm()
  LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArch
  LoongArch: Fix return value underflow in exception path
  LoongArch: Fix CMDLINE_EXTEND and CMDLINE_BOOTLOADER handling
  LoongArch: Fix module relocation error with binutils 2.41
  LoongArch: Only fiddle with CHECKFLAGS if `need-compiler'