thunderbolt: Fix port linking by checking all adapters

[ Upstream commit 42716425ad7e1b6529ec61c260c11176841f4b5f ]

In tb_switch_default_link_ports(), while linking of ports,
only odd-numbered ports (1,3,5..) are considered and even-numbered
ports are not considered.

AMD host router has lane adapters at 2 and 3 and link ports at adapter 2
is not considered due to which lane bonding gets disabled.

Hence added a fix such that all ports are considered during
linking of ports.

Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: xlnx: zynqmp: release reset to DP controller before accessing DP registers

[ Upstream commit a338619bd76011035d462f0f9e8b2f24d7fe5a1e ]

When insmod zynqmp-dpsub.ko after rmmod it, system will hang with the
error log as below:

root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko
[   88.391289] [drm] Initialized zynqmp-dpsub 1.0.0 20130509 for fd4a0000.display on minor 0
[   88.529906] Console: switching to colour frame buffer device 128x48
[   88.549402] zynqmp-dpsub fd4a0000.display: [drm] fb0: zynqmp-dpsubdrm frame buffer device
[   88.571624] zynqmp-dpsub fd4a0000.display: ZynqMP DisplayPort Subsystem driver probed
root@xilinx-zynqmp:~# rmmod zynqmp_dpsub
[   94.023404] Console: switching to colour dummy device 80x25
root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko
<hang here>

This is because that in zynqmp_dp_probe it tries to access some DP
registers while the DP controller is still in the reset state. When
running "rmmod zynqmp_dpsub", zynqmp_dp_reset(dp, true) in
zynqmp_dp_phy_exit is called to force the DP controller into the reset
state. Then insmod will call zynqmp_dp_probe to program the DP registers,
but at this moment the DP controller hasn't been brought out of the reset
state yet since the function zynqmp_dp_reset(dp, false) is called later and
this will result the system hang.

Releasing the reset to DP controller before any read/write operation to it
will fix this issue. And for symmetry, move zynqmp_dp_reset() call from
zynqmp_dp_phy_exit() to zynqmp_dp_remove().

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: xlnx: zynqmp_dpsub: Call pm_runtime_get_sync before setting pixel clock

[ Upstream commit a19effb6dbe5bd1be77a6d68eba04dba8993ffeb ]

The Runtime PM subsystem will force the device "fd4a0000.zynqmp-display"
to enter suspend state while booting if the following conditions are met:
- the usage counter is zero (pm_runtime_get_sync hasn't been called yet)
- no 'active' children (no zynqmp-dp-snd-xx node under dpsub node)
- no other device in the same power domain (dpdma node has no
"power-domains = <&zynqmp_firmware PD_DP>" property)

So there is a scenario as below:
1) DP device enters suspend state   <- call zynqmp_gpd_power_off
2) zynqmp_disp_crtc_setup_clock     <- configurate register VPLL_FRAC_CFG
3) pm_runtime_get_sync     <- call zynqmp_gpd_power_on and clear previous
       VPLL_FRAC_CFG configuration
4) clk_prepare_enable(disp->pclk)   <- enable failed since VPLL_FRAC_CFG
       configuration is corrupted

From above, we can see that pm_runtime_get_sync may clear register
VPLL_FRAC_CFG configuration and result the failure of clk enabling.
Putting pm_runtime_get_sync at the very beginning of the function
zynqmp_disp_crtc_atomic_enable can resolve this issue.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660

[ Upstream commit 462f7017a6918d152870bfb8852f3c70fd74b296 ]

VDDA is not present and the specified load value is wrong. Fix it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222057.52641-1-konrad.dybcio@somainline.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: mdp4: drop vblank get/put from prepare/complete_commit

[ Upstream commit 56bd931ae506730c9ab1e4cc4bfefa43fc2d18fa ]

msm_atomic is doing vblank get/put's already,
currently there no need to duplicate the effort in MDP4

Fix warning:
...
WARNING: CPU: 3 PID: 79 at drivers/gpu/drm/drm_vblank.c:1194 drm_vblank_put+0x1cc/0x1d4
...
and multiple vblank time-outs:
...
msm 5100000.mdp: vblank time out, crtc=1
...

Tested on Nexus 7 2013 (deb), LTS 5.10.50.

Introduced by: 119ecb7fd3b5 ("drm/msm/mdp4: request vblank during modeset")

Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210715060925.7880-1-david@ixit.cz
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()

[ Upstream commit 4367355dd90942a71641c98c40c74589c9bddf90 ]

When compiling with clang in certain configurations, an objtool warning
appears:

drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.o: warning: objtool:
ipq806x_gmac_probe() falls through to next function phy_modes()

This happens because the unreachable annotation in the third switch
statement is not eliminated. The compiler should know that the first
default case would prevent the second and third from being reached as
the comment notes but sanitizer options can make it harder for the
compiler to reason this out.

Help the compiler out by eliminating the unreachable() annotation and
unifying the default case error handling so that there is no objtool
warning, the meaning of the code stays the same, and there is less
duplication.

Reported-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmem: qfprom: Fix up qfprom_disable_fuse_blowing() ordering

[ Upstream commit 11c4b3e264d68ba6dcd52d12dbcfd3f564f2f137 ]

qfprom_disable_fuse_blowing() disables a bunch of resources,
and then does a few register writes in the 'conf' address
space.
It works perhaps because the resources are needed only for the
'raw' register space writes, and that the 'conf' space allows
read/writes regardless.
However that makes the code look confusing, so just move the
register writes before turning off the resources in the
function.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210806085947.22682-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: Fix epss_l3 unit address

[ Upstream commit 77b53d65dc1e54321ec841912f06bcb558a079c0 ]

The unit address of the epss_l3 node is incorrect and does not match
the address of its "reg" property. Let's fix it.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210211193637.9737-1-georgi.djakov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: don't use underscore in node name

[ Upstream commit 84f3efbe5b4654077608bc2fc027177fe4592321 ]

We have underscore (_) in node name leading to warning:

arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'clock-output-names': ['xo_board'], 'phandle': [[115]]}

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-10-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8994: don't use underscore in node name

[ Upstream commit 8c678beca7ed3fa8a2c6d86f6603bc23400f9ad8 ]

We have underscore (_) in node name leading to warning:
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'phandle': [[26]]}
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: sleep_clk: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[32768]]}

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-9-vkoul@kernel.org
[bjorn: Added clock-output-names to satisfy parent_names]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm630: don't use underscore in node name

[ Upstream commit 639dfdbecd88ec05bda87b1d5d419afad50af21c ]

We have underscore (_) in node name so fix that up as well.

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-11-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq6018: drop '0x' from unit address

[ Upstream commit 1b91b8ef60e9a67141e66af3cca532c00f4605fe ]

Nodes need not contain '0x' for the unit address. Drop it to fix the
below warning:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: reserved-memory:
'memory@0x60000' does not match any of the regexes

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-19-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm660: use reg value for memory node

[ Upstream commit c81210e38966cfa1c784364e4035081c3227cf5b ]

memory node like other node should be node@reg, which is missing in this
case, so fix it up

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 1073741824, 0, 536870912]]}

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-18-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq8074: fix pci node reg property

[ Upstream commit 52c9887fba71fc8f12d343833fc595c762aac8c7 ]

reg property should be array of values, here it is a single array,
leading to below warning:

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:reg:0: [268435456, 3869, 268439328, 168, 557056, 8192, 269484032, 4096] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488]] is not of type 'null'
[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:reg:0: [536870912, 3869, 536874784, 168, 524288, 8192, 537919488, 4096] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488]] is not of type 'null'
[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488] is too long

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-17-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx53-ppd: Fix ACHC entry

[ Upstream commit cd7cd5b716d594e27a933c12f026d4f2426d7bf4 ]

PPD has only one ACHC device, which effectively is a Kinetis
microcontroller. It has one SPI interface used for normal
communication. Additionally it's possible to flash the device
firmware using NXP's EzPort protocol by correctly driving a
second chip select pin and the device reset pin.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210802172309.164365-3-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_omap: Handle optional overrun-throttle-ms property

[ Upstream commit 1fe0e1fa3209ad8e9124147775bd27b1d9f04bd4 ]

Handle optional overrun-throttle-ms property as done for 8250_fsl in commit
6d7f677a2afa ("serial: 8250: Rate limit serial port rx interrupts during
input overruns"). This can be used to rate limit the UART interrupts on
noisy lines that end up producing messages like the following:

ttyS ttyS2: 4 input overrun(s)

At least on droid4, the multiplexed USB and UART port is left to UART mode
by the bootloader for a debug console, and if a USB charger is connected
on boot, we get noise on the UART until the PMIC related drivers for PHY
and charger are loaded.

With this patch and overrun-throttle-ms = <500> we avoid the extra rx
interrupts.

Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210727103533.51547-2-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm630: Fix TLMM node and pinctrl configuration

[ Upstream commit 36a0d47aee6a8cfd3c6cf4274732d8ef994a25b4 ]

Previous pinctrl configuration was wrong. Fix it and clean up how
multi-pin states are described.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-9-konrad.dybcio@somainline.org
[bjorn: Polished the commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm630: Rewrite memory map

[ Upstream commit 26e02c98a9ad63eb21b9be4ac92002f555130d3b ]

The memory map was wrong. Fix it.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Fix glock recursion in freeze_go_xmote_bh

[ Upstream commit 9d9b16054b7d357afde69a027514c695092b0d22 ]

We must not call gfs2_consist (which does a file system withdraw) from
the freeze glock's freeze_go_xmote_bh function because the withdraw
will try to use the freeze glock, thus causing a glock recursion error.

This patch changes freeze_go_xmote_bh to call function
gfs2_assert_withdraw_delayed instead of gfs2_consist to avoid recursion.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: tegra-cec: Handle errors of clk_prepare_enable()

[ Upstream commit 38367073c796a37a61549b1f66a71b3adb03802d ]

tegra_cec_probe() and tegra_cec_resume() ignored possible errors of
clk_prepare_enable(). The patch fixes this.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: TDA1997x: fix tda1997x_query_dv_timings() return value

[ Upstream commit 7dee1030871a48d4f3c5a74227a4b4188463479a ]

Correctly propagate the tda1997x_detect_std error value.

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2-dv-timings.c: fix wrong condition in two for-loops

[ Upstream commit 4108b3e6db31acc4c68133290bbcc87d4db905c9 ]

These for-loops should test against v4l2_dv_timings_presets[i].bt.width,
not if i < v4l2_dv_timings_presets[i].bt.width. Luckily nothing ever broke,
since the smallest width is still a lot higher than the total number of
presets, but it is wrong.

The last item in the presets array is all 0, so the for-loop must stop
when it reaches that sentinel.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx258: Limit the max analogue gain to 480

[ Upstream commit f809665ee75fff3f4ea8907f406a66d380aeb184 ]

The range for analog gain mentioned in the datasheet is [0, 480].
The real gain formula mentioned in the datasheet is:

Gain = 512 / (512 – X)

Hence, values larger than 511 clearly makes no sense. The gain
register field is also documented to be of 9-bits in the datasheet.

Certainly, it is enough to infer that, the kernel driver currently
advertises an arbitrary analog gain max. Fix it by rectifying the
value as per the data sheet i.e. 480.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx258: Rectify mismatch of VTS value

[ Upstream commit 51f93add3669f1b1f540de1cf397815afbd4c756 ]

The frame_length_lines (0x0340) registers are hard-coded as follows:

- 4208x3118
  frame_length_lines = 0x0c50

- 2104x1560
  frame_length_lines = 0x0638

- 1048x780
  frame_length_lines = 0x034c

The driver exposes the V4L2_CID_VBLANK control in read-only mode and
sets its value to vts_def - height, where vts_def is a mode-dependent
value coming from the supported_modes array. It is set using one of
the following macros defined in the driver:

  #define IMX258_VTS_30FPS                0x0c98
  #define IMX258_VTS_30FPS_2K             0x0638
  #define IMX258_VTS_30FPS_VGA            0x034c

There's a clear mismatch in the value for the full resolution mode i.e.
IMX258_VTS_30FPS. Fix it by rectifying the macro with the value set for
the frame_length_lines register as stated above.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: update sof_pcm512x quirks

[ Upstream commit 22414cade8dfec25ab94df52b3a4f7aa8edb6120 ]

The default SOF topology enables SSP capture and DMICs, even though
both of these hardware capabilities are not always available in
hardware (specific versions of HiFiberry and DMIC kit needed).

For the SSP capture, this leads to annoying "SP5-Codec: ASoC: no
backend capture" and "streamSSP5-Codec: ASoC: no users capture at
close - state 0" errors.

Update the quirks to match what the topology needs, which also allows
for the ability to remove SSP capture and DMIC support.

BugLink: https://github.com/thesofproject/linux/issues/3061
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210802152151.15832-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Move "Platform Clock" routes to the maps for the matching in-/output

[ Upstream commit dccd1dfd0770bfd494b68d1135b4547b2c602c42 ]

Move the "Platform Clock" routes for the "Internal Mic" and "Speaker"
routes to the intmic_*_map[] / *_spk_map[] arrays.

This ensures that these "Platform Clock" routes do not get added when the
BYT_RT5640_NO_INTERNAL_MIC_MAP / BYT_RT5640_NO_SPEAKERS quirks are used.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix Tegra194 PCIe EP compatible string

[ Upstream commit bf2942a8b7c38e8cc2d5157b4f0323d7f4e5ec71 ]

The initialization sequence performed by the generic platform driver
pcie-designware-plat.c for a DWC based implementation doesn't work for
Tegra194. Tegra194 has a different initialization sequence requirement
which can only be satisfied by the Tegra194 specific platform driver
pcie-tegra194.c. So, remove the generic compatible string "snps,dw-pcie-ep"
from Tegra194's endpoint controller nodes.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: use the right property for shutdown controller

[ Upstream commit 818c4593434e81c9971b8fc278215121622c755e ]

The wrong property "atmel,shdwc-debouncer" was used to specify the
debounce delay for the shutdown controler. Replace it with the
documented and implemented property "debounce-delay-us", as mentioned
in v4 driver submission. See:
https://lore.kernel.org/r/1458134390-23847-3-git-send-email-nicolas.ferre@atmel.com/

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reported-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20210730172729.28093-1-nicolas.ferre@microchip.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: 3ad: fix the concurrency between __bond_release_one() and bond_3ad_state_machine_handler()

[ Upstream commit 220ade77452c15ecb1ab94c3f8aaeb6d033c3582 ]

Some time ago, I reported a calltrace issue
"did not find a suitable aggregator", please see[1].
After a period of analysis and reproduction, I find
that this problem is caused by concurrency.

Before the problem occurs, the bond structure is like follows:

bond0 - slaver0(eth0) - agg0.lag_ports -> port0 - port1
                      \
                        port0
      \
        slaver1(eth1) - agg1.lag_ports -> NULL
                      \
                        port1

If we run 'ifenslave bond0 -d eth1', the process is like below:

excuting __bond_release_one()
|
bond_upper_dev_unlink()[step1]
|                       |                       |
|                       |                       bond_3ad_lacpdu_recv()
|                       |                       ->bond_3ad_rx_indication()
|                       |                       spin_lock_bh()
|                       |                       ->ad_rx_machine()
|                       |                       ->__record_pdu()[step2]
|                       |                       spin_unlock_bh()
|                       |                       |
|                       bond_3ad_state_machine_handler()
|                       spin_lock_bh()
|                       ->ad_port_selection_logic()
|                       ->try to find free aggregator[step3]
|                       ->try to find suitable aggregator[step4]
|                       ->did not find a suitable aggregator[step5]
|                       spin_unlock_bh()
|                       |
|                       |
bond_3ad_unbind_slave() |
spin_lock_bh()
spin_unlock_bh()

step1: already removed slaver1(eth1) from list, but port1 remains
step2: receive a lacpdu and update port0
step3: port0 will be removed from agg0.lag_ports. The struct is
       "agg0.lag_ports -> port1" now, and agg0 is not free. At the
   same time, slaver1/agg1 has been removed from the list by step1.
   So we can't find a free aggregator now.
step4: can't find suitable aggregator because of step2
step5: cause a calltrace since port->aggregator is NULL

To solve this concurrency problem, put bond_upper_dev_unlink()
after bond_3ad_unbind_slave(). In this way, we can invalid the port
first and skip this port in bond_3ad_state_machine_handler(). This
eliminates the situation that the slaver has been removed from the
list but the port is still valid.

[1]https://lore.kernel.org/netdev/10374.1611947473@famine/

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Update AV96 adv7513 node per dtbs_check

[ Upstream commit 1e6bc5987a5252948e3411e5a2dbb434fd1ea107 ]

Swap reg and reg-names order and drop adi,input-justification
and adi,input-style to fix the following dtbs_check warnings:
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: adi,input-justification: False schema does not allow ['evenly']
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: adi,input-style: False schema does not allow [[1]]
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: reg-names:1: 'edid' was expected
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: reg-names:2: 'cec' was expected

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Set {bitclock,frame}-master phandles on ST DKx

[ Upstream commit 8aec45d7884f16cc21d668693c5b88bff8df0f02 ]

Fix the following dtbs_check warning:
cs42l51@4a: port:endpoint@0:frame-master: True is not of type 'array'
cs42l51@4a: port:endpoint@0:bitclock-master: True is not of type 'array'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Set {bitclock,frame}-master phandles on DHCOM SoM

[ Upstream commit a79e78c391dc074742c855dc0108a88f781d56a3 ]

Fix the following dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: codec@a: port:endpoint@0:frame-master: True is not of type 'array'
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: codec@a: port:endpoint@0:bitclock-master: True is not of type 'array'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

workqueue: Fix possible memory leaks in wq_numa_init()

[ Upstream commit f728c4a9e8405caae69d4bc1232c54ff57b5d20f ]

In error handling branch "if (WARN_ON(node == NUMA_NO_NODE))", the
previously allocated memories are not released. Doing this before
allocating memory eliminates memory leaks.

tj: Note that the condition only occurs when the arch code is pretty broken
and the WARN_ON might as well be BUG_ON().

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: skip invalid hci_sync_conn_complete_evt

[ Upstream commit 92fe24a7db751b80925214ede43f8d2be792ea7b ]

Syzbot reported a corrupted list in kobject_add_internal [1]. This
happens when multiple HCI_EV_SYNC_CONN_COMPLETE event packets with
status 0 are sent for the same HCI connection. This causes us to
register the device more than once which corrupts the kset list.

As this is forbidden behavior, we add a check for whether we're
trying to process the same HCI_EV_SYNC_CONN_COMPLETE event multiple
times for one connection. If that's the case, the event is invalid, so
we report an error that the device is misbehaving, and ignore the
packet.

Link: https://syzkaller.appspot.com/bug?extid=66264bf2fd0476be7e6c
Reported-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Tested-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()

[ Upstream commit 3ad4a31620355358316fa08fcfab37b9d6c33347 ]

Last change to device managed APIs cleaned up error path to simple phy_exit()
call, which in some cases has been executed with NULL parameter. This per se
is not a problem, but rather logical misconception: no need to free resource
when it's for sure has not been allocated yet. Fix the driver accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210727125130.19977-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix race when pinning maps in parallel

[ Upstream commit 043c5bb3c4f43670ab4fea0b847373ab42d25f3e ]

When loading in parallel multiple programs which use the same to-be
pinned map, it is possible that two instances of the loader will call
bpf_object__create_maps() at the same time. If the map doesn't exist
when both instances call bpf_object__reuse_map(), then one of the
instances will fail with EEXIST when calling bpf_map__pin().

Fix the race by retrying reusing a map if bpf_map__pin() returns
EEXIST. The fix is similar to the one in iproute2: e4c4685fd6e4 ("bpf:
Fix race condition with map pinning").

Before retrying the pinning, we don't do any special cleaning of an
internal map state. The closer code inspection revealed that it's not
required:

    - bpf_object__create_map(): map->inner_map is destroyed after a
      successful call, map->fd is closed if pinning fails.
    - bpf_object__populate_internal_map(): created map elements is
      destroyed upon close(map->fd).
    - init_map_slots(): slots are freed after their initialization.

Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210726152001.34845-1-m@lambda.lt
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples: bpf: Fix tracex7 error raised on the missing argument

[ Upstream commit 7d07006f05922b95518be403f08ef8437b67aa32 ]

The current behavior of 'tracex7' doesn't consist with other bpf samples
tracex{1..6}. Other samples do not require any argument to run with, but
tracex7 should be run with btrfs device argument. (it should be executed
with test_override_return.sh)

Currently, tracex7 doesn't have any description about how to run this
program and raises an unexpected error. And this result might be
confusing since users might not have a hunch about how to run this
program.

    // Current behavior
    # ./tracex7
    sh: 1: Syntax error: word unexpected (expecting ")")
    // Fixed behavior
    # ./tracex7
    ERROR: Run with the btrfs device argument!

In order to fix this error, this commit adds logic to report a message
and exit when running this program with a missing argument.

Additionally in test_override_return.sh, there is a problem with
multiple directory(tmpmnt) creation. So in this commit adds a line with
removing the directory with every execution.

Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210727041056.23455-1-claudiajkang@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: ks7010: Fix the initialization of the 'sleep_status' structure

[ Upstream commit 56315e55119c0ea57e142b6efb7c31208628ad86 ]

'sleep_status' has 3 atomic_t members. Initialize the 3 of them instead of
initializing only 2 of them and setting 0 twice to the same variable.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d2e52a33a9beab41879551d0ae2fdfc99970adab.1626856991.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_pci: make setup_port() parameters explicitly unsigned

[ Upstream commit 3a96e97ab4e835078e6f27b7e1c0947814df3841 ]

The bar and offset parameters to setup_port() are used in pointer math,
and while it would be very difficult to get them to wrap as a negative
number, just be "safe" and make them unsigned so that static checkers do
not trip over them unintentionally.

Cc: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Jordy Zomer <jordy@pwning.systems>
Link: https://lore.kernel.org/r/20210726130717.2052096-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hvsi: don't panic on tty_register_driver failure

[ Upstream commit 7ccbdcc4d08a6d7041e4849219bbb12ffa45db4c ]

The alloc_tty_driver failure is handled gracefully in hvsi_init. But
tty_register_driver is not. panic is called if that one fails.

So handle the failure of tty_register_driver gracefully too. This will
keep at least the console functional as it was enabled earlier by
console_initcall in hvsi_console_init. Instead of shooting down the
whole system.

This means, we disable interrupts and restore hvsi_wait back to
poll_for_state().

Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: ISS: don't panic in rs_init

[ Upstream commit 23411c720052ad860b3e579ee4873511e367130a ]

While alloc_tty_driver failure in rs_init would mean we have much bigger
problem, there is no reason to panic when tty_register_driver fails
there. It can fail for various reasons.

So handle the failure gracefully. Actually handle them both while at it.
This will make at least the console functional as it was enabled earlier
by console_initcall in iss_console_init. Instead of shooting down the
whole system.

We move tty_port_init() after alloc_tty_driver(), so that we don't need
to destroy the port in case the latter function fails.

Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: Define RX trigger levels for OxSemi 950 devices

[ Upstream commit d7aff291d069c4418285f3c8ee27b0ff67ce5998 ]

Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in
the enhanced (650) mode, which we select in `autoconfig_has_efr' with
the ECB bit set in the EFR register, they support the receive interrupt
trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112,
120.  This applies to the original OX16C950 discrete UART[1] as well as
950 cores embedded into more complex devices.

For these devices we set the default to 112, which sets an excessively
high level of 112 or 7/8 of the FIFO capacity, unlike with other port
types where we choose at most 1/2 of their respective FIFO capacities.
Additionally we don't make the trigger level configurable.  Consequently
frequent input overruns happen with high bit rates where hardware flow
control cannot be used (e.g. terminal applications) even with otherwise
highly-performant systems.

Lower the default receive interrupt trigger level to 32 then, and make
it configurable.  Document the trigger levels along with other port
types, including the set of 16, 32, 64, 112 for the transmit interrupt
as well[2].

References:

[1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford
    Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger
    Levels", p. 22

[2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390: make PCI mio support a machine flag

[ Upstream commit 3322ba0d7bea1e24ae464418626f6a15b69533ab ]

Kernel support for the newer PCI mio instructions can be toggled off
with the pci=nomio command line option which needs to integrate with
common code PCI option parsing. However this option then toggles static
branches which can't be toggled yet in an early_param() call.

Thus commit 9964f396f1d0 ("s390: fix setting of mio addressing control")
moved toggling the static branches to the PCI init routine.

With this setup however we can't check for mio support outside the PCI
code during early boot, i.e. before switching the static branches, which
we need to be able to export this as an ELF HWCAP.

Improve on this by turning mio availability into a machine flag that
gets initially set based on CONFIG_PCI and the facility bit and gets
toggled off if pci=nomio is found during PCI option parsing allowing
simple access to this machine flag after early init.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/jump_label: print real address in a case of a jump label bug

[ Upstream commit 5492886c14744d239e87f1b0b774b5a341e755cc ]

In case of a jump label print the real address of the piece of code
where a mismatch was detected. This is right before the system panics,
so there is nothing revealed.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

flow_dissector: Fix out-of-bounds warnings

[ Upstream commit 323e0cb473e2a8706ff162b6b4f4fa16023c9ba7 ]

Fix the following out-of-bounds warnings:

    net/core/flow_dissector.c: In function '__skb_flow_dissect':
>> net/core/flow_dissector.c:1104:4: warning: 'memcpy' offset [24, 39] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'struct in6_addr' at offset 8 [-Warray-bounds]
     1104 |    memcpy(&key_addrs->v6addrs, &iph->saddr,
          |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     1105 |           sizeof(key_addrs->v6addrs));
          |           ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from include/linux/ipv6.h:5,
                     from net/core/flow_dissector.c:6:
    include/uapi/linux/ipv6.h:133:18: note: subobject 'saddr' declared here
      133 |  struct in6_addr saddr;
          |                  ^~~~~
>> net/core/flow_dissector.c:1059:4: warning: 'memcpy' offset [16, 19] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 12 [-Warray-bounds]
     1059 |    memcpy(&key_addrs->v4addrs, &iph->saddr,
          |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     1060 |           sizeof(key_addrs->v4addrs));
          |           ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from include/linux/ip.h:17,
                     from net/core/flow_dissector.c:5:
    include/uapi/linux/ip.h:103:9: note: subobject 'saddr' declared here
      103 |  __be32 saddr;
          |         ^~~~~

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy().  So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()

[ Upstream commit 6321c7acb82872ef6576c520b0e178eaad3a25c0 ]

Fix the following out-of-bounds warning:

    In function 'ip_copy_addrs',
        inlined from '__ip_queue_xmit' at net/ipv4/ip_output.c:517:2:
net/ipv4/ip_output.c:449:2: warning: 'memcpy' offset [40, 43] from the object at 'fl' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 36 [-Warray-bounds]
      449 |  memcpy(&iph->saddr, &fl4->saddr,
          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      450 |         sizeof(fl4->saddr) + sizeof(fl4->daddr));
          |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &iph->saddr and &fl4->saddr. As these are just
a couple of struct members, fix this by using direct assignments,
instead of memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: riva: Error out if 'pixclock' equals zero

[ Upstream commit f92763cb0feba247e0939ed137b495601fd072a5 ]

The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.

Fix this by checking whether 'pixclock' is zero first.

The following log reveals it:

[   33.396850] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[   33.396864] CPU: 5 PID: 11754 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #222
[   33.396883] RIP: 0010:riva_load_video_mode+0x417/0xf70
[   33.396969] Call Trace:
[   33.396973]  ? debug_smp_processor_id+0x1c/0x20
[   33.396984]  ? tick_nohz_tick_stopped+0x1a/0x90
[   33.396996]  ? rivafb_copyarea+0x3c0/0x3c0
[   33.397003]  ? wake_up_klogd.part.0+0x99/0xd0
[   33.397014]  ? vprintk_emit+0x110/0x4b0
[   33.397024]  ? vprintk_default+0x26/0x30
[   33.397033]  ? vprintk+0x9c/0x1f0
[   33.397041]  ? printk+0xba/0xed
[   33.397054]  ? record_print_text.cold+0x16/0x16
[   33.397063]  ? __kasan_check_read+0x11/0x20
[   33.397074]  ? profile_tick+0xc0/0x100
[   33.397084]  ? __sanitizer_cov_trace_const_cmp4+0x24/0x80
[   33.397094]  ? riva_set_rop_solid+0x2a0/0x2a0
[   33.397102]  rivafb_set_par+0xbe/0x610
[   33.397111]  ? riva_set_rop_solid+0x2a0/0x2a0
[   33.397119]  fb_set_var+0x5bf/0xeb0
[   33.397127]  ? fb_blank+0x1a0/0x1a0
[   33.397134]  ? lock_acquire+0x1ef/0x530
[   33.397143]  ? lock_release+0x810/0x810
[   33.397151]  ? lock_is_held_type+0x100/0x140
[   33.397159]  ? ___might_sleep+0x1ee/0x2d0
[   33.397170]  ? __mutex_lock+0x620/0x1190
[   33.397180]  ? trace_hardirqs_on+0x6a/0x1c0
[   33.397190]  do_fb_ioctl+0x31e/0x700

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-4-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: kyro: Error out if 'pixclock' equals zero

[ Upstream commit 1520b4b7ba964f8eec2e7dd14c571d50de3e5191 ]

The userspace program could pass any values to the driver through
ioctl() interface. if the driver doesn't check the value of 'pixclock',
it may cause divide error because the value of 'lineclock' and
'frameclock' will be zero.

Fix this by checking whether 'pixclock' is zero in kyrofb_check_var().

The following log reveals it:

[  103.073930] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[  103.073942] CPU: 4 PID: 12483 Comm: syz-executor Not tainted 5.14.0-rc2-00478-g2734d6c1b1a0-dirty #118
[  103.073959] RIP: 0010:kyrofb_set_par+0x316/0xc80
[  103.074045] Call Trace:
[  103.074048]  ? ___might_sleep+0x1ee/0x2d0
[  103.074060]  ? kyrofb_ioctl+0x330/0x330
[  103.074069]  fb_set_var+0x5bf/0xeb0
[  103.074078]  ? fb_blank+0x1a0/0x1a0
[  103.074085]  ? lock_acquire+0x3bd/0x530
[  103.074094]  ? lock_release+0x810/0x810
[  103.074103]  ? ___might_sleep+0x1ee/0x2d0
[  103.074114]  ? __mutex_lock+0x620/0x1190
[  103.074126]  ? trace_hardirqs_on+0x6a/0x1c0
[  103.074137]  do_fb_ioctl+0x31e/0x700
[  103.074144]  ? fb_getput_cmap+0x280/0x280
[  103.074152]  ? rcu_read_lock_sched_held+0x11/0x80
[  103.074162]  ? rcu_read_lock_sched_held+0x11/0x80
[  103.074171]  ? __sanitizer_cov_trace_switch+0x67/0xf0
[  103.074181]  ? __sanitizer_cov_trace_const_cmp2+0x20/0x80
[  103.074191]  ? do_vfs_ioctl+0x14b/0x16c0
[  103.074199]  ? vfs_fileattr_set+0xb60/0xb60
[  103.074207]  ? rcu_read_lock_sched_held+0x11/0x80
[  103.074216]  ? lock_release+0x483/0x810
[  103.074224]  ? __fget_files+0x217/0x3d0
[  103.074234]  ? __fget_files+0x239/0x3d0
[  103.074243]  ? do_fb_ioctl+0x700/0x700
[  103.074250]  fb_ioctl+0xe6/0x130

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-3-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: asiliantfb: Error out if 'pixclock' equals zero

[ Upstream commit b36b242d4b8ea178f7fd038965e3cac7f30c3f09 ]

The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.

Fix this by checking whether 'pixclock' is zero first.

The following log reveals it:

[   43.861711] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[   43.861737] CPU: 2 PID: 11764 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #224
[   43.861756] RIP: 0010:asiliantfb_check_var+0x4e/0x730
[   43.861843] Call Trace:
[   43.861848]  ? asiliantfb_remove+0x190/0x190
[   43.861858]  fb_set_var+0x2e4/0xeb0
[   43.861866]  ? fb_blank+0x1a0/0x1a0
[   43.861873]  ? lock_acquire+0x1ef/0x530
[   43.861884]  ? lock_release+0x810/0x810
[   43.861892]  ? lock_is_held_type+0x100/0x140
[   43.861903]  ? ___might_sleep+0x1ee/0x2d0
[   43.861914]  ? __mutex_lock+0x620/0x1190
[   43.861921]  ? do_fb_ioctl+0x313/0x700
[   43.861929]  ? mutex_lock_io_nested+0xfa0/0xfa0
[   43.861936]  ? __this_cpu_preempt_check+0x1d/0x30
[   43.861944]  ? _raw_spin_unlock_irqrestore+0x46/0x60
[   43.861952]  ? lockdep_hardirqs_on+0x59/0x100
[   43.861959]  ? _raw_spin_unlock_irqrestore+0x46/0x60
[   43.861967]  ? trace_hardirqs_on+0x6a/0x1c0
[   43.861978]  do_fb_ioctl+0x31e/0x700

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-2-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node names

[ Upstream commit 7ab1f6539762946de06ca14d7401ae123821bc40 ]

Regulator node names don't reflect class of the device. Fix that by
prefixing names with "regulator-".

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210722161220.51181-2-jernej.skrabec@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: nwl-dsi: Avoid potential multiplication overflow on 32-bit

[ Upstream commit 47956bc86ee4e8530cac386a04f62a6095f7afbe ]

As nwl_dsi.lanes is u32, and NSEC_PER_SEC is 1000000000L, the second
multiplication in

    dsi->lanes * 8 * NSEC_PER_SEC

will overflow on a 32-bit platform.  Fix this by making the constant
unsigned long long, forcing 64-bit arithmetic.

As iMX8 is arm64, this driver is currently used on 64-bit platforms
only, where long is 64-bit, so this cannot happen.  But the issue will
start to happen when the driver is reused for a 32-bit SoC (e.g.
i.MX7ULP), or when code is copied for a new driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ebb82941a86b4e35c4fcfb1ef5a5cfad7c1fceab.1626255956.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf/tests: Do not PASS tests without actually testing the result

[ Upstream commit 2b7e9f25e590726cca76700ebdb10e92a7a72ca1 ]

Each test case can have a set of sub-tests, where each sub-test can
run the cBPF/eBPF test snippet with its own data_size and expected
result. Before, the end of the sub-test array was indicated by both
data_size and result being zero. However, most or all of the internal
eBPF tests has a data_size of zero already. When such a test also had
an expected value of zero, the test was never run but reported as
PASS anyway.

Now the test runner always runs the first sub-test, regardless of the
data_size and result values. The sub-test array zero-termination only
applies for any additional sub-tests.

There are other ways fix it of course, but this solution at least
removes the surprise of eBPF tests with a zero result always succeeding.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721103822.3755111-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf/tests: Fix copy-and-paste error in double word test

[ Upstream commit ae7f47041d928b1a2f28717d095b4153c63cbf6a ]

This test now operates on DW as stated instead of W, which was
already covered by another test.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721104058.3755254-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/amdgpu: Update debugfs link_settings output link_rate field in hex

[ Upstream commit 1a394b3c3de2577f200cb623c52a5c2b82805cec ]

link_rate is updated via debugfs using hex values, set it to output
in hex as well.

eg: Resolution: 1920x1080@144Hz
cat /sys/kernel/debug/dri/0/DP-1/link_settings
Current:  4  0x14  0  Verified:  4  0x1e  0  Reported:  4  0x1e  16  Preferred:  0  0x0  0

echo "4 0x1e" > /sys/kernel/debug/dri/0/DP-1/link_settings

cat /sys/kernel/debug/dri/0/DP-1/link_settings
Current:  4  0x1e  0  Verified:  4  0x1e  0  Reported:  4  0x1e  16  Preferred:  4  0x1e  0

Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix a printing message

[ Upstream commit 95f71f12aa45d65b7f2ccab95569795edffd379a ]

The printing message "PSP loading VCN firmware" is mis-leading because
people might think driver is loading VCN firmware. Actually when this
message is printed, driver is just preparing some VCN ucode, not loading
VCN firmware yet. The actual VCN firmware loading will be in the PSP block
hw_init. Fix the printing message

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethtool: improve compat ioctl handling

[ Upstream commit dd98d2895de6485c884a9cb42de69fed02826fa4 ]

The ethtool compat ioctl handling is hidden away in net/socket.c,
which introduces a couple of minor oddities:

- The implementation may end up diverging, as seen in the RXNFC
  extension in commit 84a1d9c48200 ("net: ethtool: extend RXNFC
  API to support RSS spreading of filter matches") that does not work
  in compat mode.

- Most architectures do not need the compat handling at all
  because u64 and compat_u64 have the same alignment.

- On x86, the conversion is done for both x32 and i386 user space,
  but it's actually wrong to do it for x32 and cannot work there.

- On 32-bit Arm, it never worked for compat oabi user space, since
  that needs to do the same conversion but does not.

- It would be nice to get rid of both compat_alloc_user_space()
  and copy_in_user() throughout the kernel.

None of these actually seems to be a serious problem that real
users are likely to encounter, but fixing all of them actually
leads to code that is both shorter and more readable.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: fix return statement in nfp_net_parse_meta()

[ Upstream commit 4431531c482a2c05126caaa9fcc5053a4a5c495b ]

The return type of the function is bool and while NULL do evaluate to
false it's not very nice, fix this by explicitly returning false. There
is no functional change.

Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: atomisp: pci: fix error return code in atomisp_pci_probe()

[ Upstream commit d14e272958bdfdc40dcafb827d24ba6fdafa9d52 ]

If init_atomisp_wdts() fails, atomisp_pci_probe() need return
error code.

Link: https://lore.kernel.org/linux-media/20210617072329.1233662-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: atomisp: Fix runtime PM imbalance in atomisp_pci_probe

[ Upstream commit 672fe1cf145ab9978c62eb827d6a16aa6b63994b ]

When hmm_pool_register() fails, a pairing PM usage counter
increment is needed to keep the counter balanced. It's the
same for the following error paths.

Link: https://lore.kernel.org/linux-media/20210408081850.24278-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: stm32: unprepare clocks at handling errors in probe

[ Upstream commit 055d2db28ec2fa3ab5c527c5604f1b32b89fa13a ]

stm32_cec_probe() did not unprepare clocks on error handling paths. The
patch fixes that.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: vp8: Move noisy WARN_ON to vpu_debug

[ Upstream commit 6ad61a7847da09b6261824accb539d05bcdfef65 ]

When the VP8 decoders can't find a reference frame,
the driver falls back to the current output frame.

This will probably produce some undesirable results,
leading to frame corruption, but shouldn't cause
noisy warnings.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix timer_per_pixel unit error

[ Upstream commit 23e55639b87fb16a9f0f66032ecb57060df6c46c ]

[why]
The units of the time_per_pixel variable were incorrect, this had to be
changed for the code to properly function.

[how]
The change was very straightforward, only required one line of code to
be changed where the calculation was done.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Oliver Logush <oliver.logush@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: firmware: Fix ignored return val of asprintf() warn

[ Upstream commit fe968ca2cac91888310b143a483123c84906e3fc ]

Fix the following ingonred return val of asprintf() warn during
build:

cc -Wall -O2    fw_namespace.c  -o ../tools/testing/selftests/firmware/fw_namespace
fw_namespace.c: In function ‘main’:
fw_namespace.c:132:2: warning: ignoring return value of ‘asprintf’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
  132 |  asprintf(&fw_path, "/lib/firmware/%s", fw_name);
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210708031827.51293-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: fsl-mc: fix mmio base address for child DPRCs

[ Upstream commit 8990f96a012f42543005b07d9e482694192e9309 ]

Some versions of the MC firmware wrongly report 0 for register base
address of the DPMCP associated with child DPRC objects thus rendering
them unusable. This is particularly troublesome in ACPI boot scenarios
where the legacy way of extracting this base address from the device
tree does not apply.
Given that DPMCPs share the same base address, workaround this by using
the base address extracted from the root DPRC container.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-8-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: jsm: hold port lock when reporting modem line changes

[ Upstream commit 240e126c28df084222f0b661321e8e3ecb0d232e ]

uart_handle_dcd_change() requires a port lock to be held and will emit a
warning when lockdep is enabled.

Held corresponding lock to fix the following warnings.

[  132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120
[  132.530482] Modules linked in:
[  132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty #31
[  132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120
[  132.557100] Call Trace:
[  132.557562]  ? __free_pages+0x83/0xb0
[  132.558213]  neo_parse_modem+0x156/0x220
[  132.558897]  neo_param+0x399/0x840
[  132.559495]  jsm_tty_open+0x12f/0x2d0
[  132.560131]  uart_startup.part.18+0x153/0x340
[  132.560888]  ? lock_is_held_type+0xe9/0x140
[  132.561660]  uart_port_activate+0x7f/0xe0
[  132.562351]  ? uart_startup.part.18+0x340/0x340
[  132.563003]  tty_port_open+0x8d/0xf0
[  132.563523]  ? uart_set_options+0x1e0/0x1e0
[  132.564125]  uart_open+0x24/0x40
[  132.564604]  tty_open+0x15c/0x630

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1626242003-3809-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: board: Fix uninitialized spinlock when attaching genpd

[ Upstream commit df00609821bf17f50a75a446266d19adb8339d84 ]

On Armadillo-800-EVA with CONFIG_DEBUG_SPINLOCK=y:

    BUG: spinlock bad magic on CPU#0, swapper/1
     lock: lcdc0_device+0x10c/0x308, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
    CPU: 0 PID: 1 Comm: swapper Not tainted 5.11.0-rc5-armadillo-00036-gbbca04be7a80-dirty #287
    Hardware name: Generic R8A7740 (Flattened Device Tree)
    [<c010c3c8>] (unwind_backtrace) from [<c010a49c>] (show_stack+0x10/0x14)
    [<c010a49c>] (show_stack) from [<c0159534>] (do_raw_spin_lock+0x20/0x94)
    [<c0159534>] (do_raw_spin_lock) from [<c040858c>] (dev_pm_get_subsys_data+0x8c/0x11c)
    [<c040858c>] (dev_pm_get_subsys_data) from [<c05fbcac>] (genpd_add_device+0x78/0x2b8)
    [<c05fbcac>] (genpd_add_device) from [<c0412db4>] (of_genpd_add_device+0x34/0x4c)
    [<c0412db4>] (of_genpd_add_device) from [<c0a1ea74>] (board_staging_register_device+0x11c/0x148)
    [<c0a1ea74>] (board_staging_register_device) from [<c0a1eac4>] (board_staging_register_devices+0x24/0x28)

of_genpd_add_device() is called before platform_device_register(), as it
needs to attach the genpd before the device is probed.  But the spinlock
is only initialized when the device is registered.

Fix this by open-coding the spinlock initialization, cfr.
device_pm_init_common() in the internal drivers/base code, and in the
SuperH early platform code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/57783ece7ddae55f2bda2f59f452180bff744ea0.1626257398.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: composite: Allow bMaxPower=0 if self-powered

[ Upstream commit bcacbf06c891374e7fdd7b72d11cda03b0269b43 ]

Currently the composite driver encodes the MaxPower field of
the configuration descriptor by reading the c->MaxPower of the
usb_configuration only if it is non-zero, otherwise it falls back
to using the value hard-coded in CONFIG_USB_GADGET_VBUS_DRAW.
However, there are cases when a configuration must explicitly set
bMaxPower to 0, particularly if its bmAttributes also has the
Self-Powered bit set, which is a valid combination.

This is specifically called out in the USB PD specification section
9.1, in which a PDUSB device "shall report zero in the bMaxPower
field after negotiating a mutually agreeable Contract", and also
verified by the USB Type-C Functional Test TD.4.10.2 Sink Power
Precedence Test.

The fix allows the c->MaxPower to be used for encoding the bMaxPower
even if it is 0, if the self-powered bit is also set.  An example
usage of this would be for a ConfigFS gadget to be dynamically
updated by userspace when the Type-C connection is determined to be
operating in Power Delivery mode.

Co-developed-by: Ronak Vijay Raheja <rraheja@codeaurora.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Ronak Vijay Raheja <rraheja@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210720080907.30292-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: EHCI: ehci-mv: improve error handling in mv_ehci_enable()

[ Upstream commit 61136a12cbed234374ec6f588af57c580b20b772 ]

mv_ehci_enable() did not disable and unprepare clocks in case of
failures of phy_init(). Besides, it did not take into account failures
of ehci_clock_enable() (in effect, failures of clk_prepare_enable()).
The patch fixes both issues and gets rid of redundant wrappers around
clk_prepare_enable() and clk_disable_unprepare() to simplify this a bit.

Found by Linux Driver Verification project (linuxtesting.org).

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Link: https://lore.kernel.org/r/20210708083056.21543-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: u_ether: fix a potential null pointer dereference

[ Upstream commit 8ae01239609b29ec2eff55967c8e0fe3650cfa09 ]

f_ncm tx timeout can call us with null skb to flush
a pending frame.  In this case skb is NULL to begin
with but ceases to be null after dev->wrap() completes.

In such a case in->maxpacket will be read, even though
we've failed to check that 'in' is not NULL.

Though I've never observed this fail in practice,
however the 'flush operation' simply does not make sense with
a null usb IN endpoint - there's nowhere to flush to...
(note that we're the gadget/device, and IN is from the point
 of view of the host, so here IN actually means outbound...)

Cc: Brooke Basile <brookebasile@gmail.com>
Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210701114834.884597-6-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: fotg210: fix the actual_length of an iso packet

[ Upstream commit 091cb2f782f32ab68c6f5f326d7868683d3d4875 ]

We should acquire the actual_length of an iso packet
from the iTD directly using FOTG210_ITD_LENGTH() macro.

Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: fotg210: fix the endpoint's transactional opportunities calculation

[ Upstream commit c2e898764245c852bc8ee4857613ba4f3a6d761d ]

Now that usb_endpoint_maxp() only returns the lowest
11 bits from wMaxPacketSize, we should make use of the
usb_endpoint_* helpers instead and remove the unnecessary
max_packet()/hb_mult() macro.

Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-3-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Check if num of q_vectors is smaller than max before array access

[ Upstream commit 373e2829e7c2e1e606503cdb5c97749f512a4be9 ]

Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed
beyond its size. It was fixed by using a local variable num_q_vectors
as a limit for loop index, and ensure that num_q_vectors is not bigger
than MAX_Q_VECTORS.

Suggested-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Fix macro name CONFIG_TASKS_RCU_TRACE

[ Upstream commit fed31a4dd3adb5455df7c704de2abb639a1dc1c0 ]

This commit fixes several typos where CONFIG_TASKS_RCU_TRACE should
instead be CONFIG_TASKS_TRACE_RCU.  Among other things, these typos
could cause CONFIG_TASKS_TRACE_RCU_READ_MB=y kernels to suffer from
memory-ordering bugs that could result in false-positive quiescent
states and too-short grace periods.

Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: protect drm_master pointers in drm_lease.c

[ Upstream commit 56f0729a510f92151682ff6c89f69724d5595d6e ]

drm_file->master pointers should be protected by
drm_device.master_mutex or drm_file.master_lookup_lock when being
dereferenced.

However, in drm_lease.c, there are multiple instances where
drm_file->master is accessed and dereferenced while neither lock is
held. This makes drm_lease.c vulnerable to use-after-free bugs.

We address this issue in 2 ways:

1. Add a new drm_file_get_master() function that calls drm_master_get
on drm_file->master while holding on to
drm_file.master_lookup_lock. Since drm_master_get increments the
reference count of master, this prevents master from being freed until
we unreference it with drm_master_put.

2. In each case where drm_file->master is directly accessed and
eventually dereferenced in drm_lease.c, we wrap the access in a call
to the new drm_file_get_master function, then unreference the master
pointer once we are done using it.

Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-6-desmondcheongzx@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: serialize drm_file.master with a new spinlock

[ Upstream commit 0b0860a3cf5eccf183760b1177a1dcdb821b0b66 ]

Currently, drm_file.master pointers should be protected by
drm_device.master_mutex when being dereferenced. This is because
drm_file.master is not invariant for the lifetime of drm_file. If
drm_file is not the creator of master, then drm_file.is_master is
false, and a call to drm_setmaster_ioctl will invoke
drm_new_set_master, which then allocates a new master for drm_file and
puts the old master.

Thus, without holding drm_device.master_mutex, the old value of
drm_file.master could be freed while it is being used by another
concurrent process.

However, it is not always possible to lock drm_device.master_mutex to
dereference drm_file.master. Through the fbdev emulation code, this
might occur in a deep nest of other locks. But drm_device.master_mutex
is also the outermost lock in the nesting hierarchy, so this leads to
potential deadlocks.

To address this, we introduce a new spin lock at the bottom of the
lock hierarchy that only serializes drm_file.master. With this change,
the value of drm_file.master changes only when both
drm_device.master_mutex and drm_file.master_lookup_lock are
held. Hence, any process holding either of those locks can ensure that
the value of drm_file.master will not change concurrently.

Since no lock depends on the new drm_file.master_lookup_lock, when
drm_file.master is dereferenced, but drm_device.master_mutex cannot be
held, we can safely protect the master pointer with
drm_file.master_lookup_lock.

Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-5-desmondcheongzx@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: avoid blocking in drm_clients_info's rcu section

[ Upstream commit 5eff9585de220cdd131237f5665db5e6c6bdf590 ]

Inside drm_clients_info, the rcu_read_lock is held to lock
pid_task()->comm. However, within this protected section, a call to
drm_is_current_master is made, which involves a mutex lock in a future
patch. However, this is illegal because the mutex lock might block
while in the RCU read-side critical section.

Since drm_is_current_master isn't protected by rcu_read_lock, we avoid
this by moving it out of the RCU critical section.

The following report came from intel-gfx ci's
igt@debugfs_test@read_all_entries testcase:

=============================
[ BUG: Invalid wait context ]
5.13.0-CI-Patchwork_20515+ #1 Tainted: G        W
-----------------------------
debugfs_test/1101 is trying to lock:
ffff888132d901a8 (&dev->master_mutex){+.+.}-{3:3}, at:
drm_is_current_master+0x1e/0x50
other info that might help us debug this:
context-{4:4}
3 locks held by debugfs_test/1101:
 #0: ffff88810fdffc90 (&p->lock){+.+.}-{3:3}, at:
 seq_read_iter+0x53/0x3b0
 #1: ffff888132d90240 (&dev->filelist_mutex){+.+.}-{3:3}, at:
 drm_clients_info+0x63/0x2a0
 #2: ffffffff82734220 (rcu_read_lock){....}-{1:2}, at:
 drm_clients_info+0x1b1/0x2a0
stack backtrace:
CPU: 8 PID: 1101 Comm: debugfs_test Tainted: G        W
5.13.0-CI-Patchwork_20515+ #1
Hardware name: Intel Corporation CometLake Client Platform/CometLake S
UDIMM (ERB/CRB), BIOS CMLSFWR1.R00.1263.D00.1906260926 06/26/2019
Call Trace:
 dump_stack+0x7f/0xad
 __lock_acquire.cold.78+0x2af/0x2ca
 lock_acquire+0xd3/0x300
 ? drm_is_current_master+0x1e/0x50
 ? __mutex_lock+0x76/0x970
 ? lockdep_hardirqs_on+0xbf/0x130
 __mutex_lock+0xab/0x970
 ? drm_is_current_master+0x1e/0x50
 ? drm_is_current_master+0x1e/0x50
 ? drm_is_current_master+0x1e/0x50
 drm_is_current_master+0x1e/0x50
 drm_clients_info+0x107/0x2a0
 seq_read_iter+0x178/0x3b0
 seq_read+0x104/0x150
 full_proxy_read+0x4e/0x80
 vfs_read+0xa5/0x1b0
 ksys_read+0x5a/0xd0
 do_syscall_64+0x39/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-3-desmondcheongzx@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Smack: Fix wrong semantics in smk_access_entry()

[ Upstream commit 6d14f5c7028eea70760df284057fe198ce7778dd ]

In the smk_access_entry() function, if no matching rule is found
in the rust_list, a negative error code will be used to perform bit
operations with the MAY_ enumeration value. This is semantically
wrong. This patch fixes this issue.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: Deal with ESRCH error in nlmsg_notify()

[ Upstream commit fef773fc8110d8124c73a5e6610f89e52814637d ]

Yonghong Song report:
The bpf selftest tc_bpf failed with latest bpf-next.
The following is the command to run and the result:
$ ./test_progs -n 132
[   40.947571] bpf_testmod: loading out-of-tree module taints kernel.
test_tc_bpf:PASS:test_tc_bpf__open_and_load 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create(BPF_TC_INGRESS) 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create invalid hook.attach_point 0 nsec
test_tc_bpf_basic:PASS:bpf_obj_get_info_by_fd 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach replace mode 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_query 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
libbpf: Kernel error message: Failed to send filter delete notification
test_tc_bpf_basic:FAIL:bpf_tc_detach unexpected error: -3 (errno 3)
test_tc_bpf:FAIL:test_tc_internal ingress unexpected error: -3 (errno 3)

The failure seems due to the commit
    cfdf0d9ae75b ("rtnetlink: use nlmsg_notify() in rtnetlink_send()")

Deal with ESRCH error in nlmsg_notify() even the report variable is zero.

Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210719051816.11762-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: kyro: fix a DoS bug by restricting user input

[ Upstream commit 98a65439172dc69cb16834e62e852afc2adb83ed ]

The user can pass in any value to the driver through the 'ioctl'
interface. The driver dost not check, which may cause DoS bugs.

The following log reveals it:

divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:SetOverlayViewPort+0x133/0x5f0 drivers/video/fbdev/kyro/STG4000OverlayDevice.c:476
Call Trace:
 kyro_dev_overlay_viewport_set drivers/video/fbdev/kyro/fbdev.c:378 [inline]
 kyrofb_ioctl+0x2eb/0x330 drivers/video/fbdev/kyro/fbdev.c:603
 do_fb_ioctl+0x1f3/0x700 drivers/video/fbdev/core/fbmem.c:1171
 fb_ioctl+0xeb/0x130 drivers/video/fbdev/core/fbmem.c:1185
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x19b/0x220 fs/ioctl.c:739
 do_syscall_64+0x32/0x80 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1626235762-2590-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: apq8064: correct clock names

[ Upstream commit 0dc6c59892ead17a9febd11202c9f6794aac1895 ]

Since new code doesn't take old clk names in account, it does fixes
error:

msm_dsi 4700000.mdss_dsi: dev_pm_opp_set_clkname: Couldn't find clock: -2

and following kernel oops introduced by
b0530eb1191 ("drm/msm/dpu: Use OPP API to set clk/perf state").

Also removes warning about deprecated clock names.

Tested against linux-5.10.y LTS on Nexus 7 2013.

Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210707131453.24041-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: fix locking of critical sections

[ Upstream commit 226d528512cfac890a1619aea4301f3dd314fe60 ]

To avoid races between iavf_init_task(), iavf_reset_task(),
iavf_watchdog_task(), iavf_adminq_task() as well as the shutdown and
remove functions more locking is required.
The current protection by __IAVF_IN_CRITICAL_TASK is needed in
additional places.

- The reset task performs state transitions, therefore needs locking.
- The adminq task acts on replies from the PF in
  iavf_virtchnl_completion() which may alter the states.
- The init task is not only run during probe but also if a VF gets stuck
  to reinitialize it.
- The shutdown function performs a state transition.
- The remove function performs a state transition and also free's
  resources.

iavf_lock_timeout() is introduced to avoid waiting infinitely
and cause a deadlock. Rather unlock and print a warning.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: do not override the adapter state in the watchdog task

[ Upstream commit 22c8fd71d3a5e6fe584ccc2c1e8760e5baefd5aa ]

The iavf watchdog task overrides adapter->state to __IAVF_RESETTING
when it detects a pending reset. Then schedules iavf_reset_task() which
takes care of the reset.

The reset task is capable of handling the reset without changing
adapter->state. In fact we lose the state information when the watchdog
task prematurely changes the adapter state. This may lead to a crash if
instead of the reset task the iavf_remove() function gets called before
the reset task.
In that case (if we were in state __IAVF_RUNNING previously) the
iavf_remove() function triggers iavf_close() which fails to close the
device because of the incorrect state information.

This may result in a crash due to pending interrupts.
kernel BUG at drivers/pci/msi.c:357!
[...]
Call Trace:
 [<ffffffffbddf24dd>] pci_disable_msix+0x3d/0x50
 [<ffffffffc08d2a63>] iavf_reset_interrupt_capability+0x23/0x40 [iavf]
 [<ffffffffc08d312a>] iavf_remove+0x10a/0x350 [iavf]
 [<ffffffffbddd3359>] pci_device_remove+0x39/0xc0
 [<ffffffffbdeb492f>] __device_release_driver+0x7f/0xf0
 [<ffffffffbdeb49c3>] device_release_driver+0x23/0x30
 [<ffffffffbddcabb4>] pci_stop_bus_device+0x84/0xa0
 [<ffffffffbddcacc2>] pci_stop_and_remove_bus_device+0x12/0x20
 [<ffffffffbddf361f>] pci_iov_remove_virtfn+0xaf/0x160
 [<ffffffffbddf3bcc>] sriov_disable+0x3c/0xf0
 [<ffffffffbddf3ca3>] pci_disable_sriov+0x23/0x30
 [<ffffffffc0667365>] i40e_free_vfs+0x265/0x2d0 [i40e]
 [<ffffffffc0667624>] i40e_pci_sriov_configure+0x144/0x1f0 [i40e]
 [<ffffffffbddd5307>] sriov_numvfs_store+0x177/0x1d0
Code: 00 00 e8 3c 25 e3 ff 49 c7 86 88 08 00 00 00 00 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 8b 7b 28 e8 0d 44
RIP  [<ffffffffbbbf1068>] free_msi_irqs+0x188/0x190

The solution is to not touch the adapter->state in iavf_watchdog_task()
and let the reset task handle the state transition.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: dac: ad5624r: Fix incorrect handling of an optional regulator.

[ Upstream commit 97683c851f9cdbd3ea55697cbe2dcb6af4287bbd ]

The naming of the regulator is problematic.  VCC is usually a supply
voltage whereas these devices have a separate VREF pin.

Secondly, the regulator core might have provided a stub regulator if
a real regulator wasn't provided. That would in turn have failed to
provide a voltage when queried. So reality was that there was no way
to use the internal reference.

In order to avoid breaking any dts out in the wild, make sure to fallback
to the original vcc naming if vref is not available.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-9-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: Fix data type in DP83822 dp8382x_disable_wol()

[ Upstream commit 0d6835ffe50c9c1f098b5704394331710b67af48 ]

The last argument of phy_clear_bits_mmd(..., u16 val); is u16 and not
int, just inline the value into the function call arguments.

No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: keep the skb in rcv queue until the whole data is read

[ Upstream commit f4919ff59c2828064b4156e3c3600a169909bcf4 ]

Currently, when userspace reads a datagram with a buffer that is
smaller than this datagram, the data will be truncated and only
part of it can be received by users. It doesn't seem right that
users don't know the datagram size and have to use a huge buffer
to read it to avoid the truncation.

This patch to fix it by keeping the skb in rcv queue until the
whole data is read by users. Only the last msg of the datagram
will be marked with MSG_EOR, just as TCP/SCTP does.

Note that this will work as above only when MSG_EOR is set in the
flags parameter of recvmsg(), so that it won't break any old user
applications.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Use pci_update_current_state() in pci_enable_device_flags()

[ Upstream commit 14858dcc3b3587f4bb5c48e130ee7d68fc2b0a29 ]

Updating the current_state field of struct pci_dev the way it is done
in pci_enable_device_flags() before calling do_pci_enable_device() may
not work.  For example, if the given PCI device depends on an ACPI
power resource whose _STA method initially returns 0 ("off"), but the
config space of the PCI device is accessible and the power state
retrieved from the PCI_PM_CTRL register is D0, the current_state
field in the struct pci_dev representing that device will get out of
sync with the power.state of its ACPI companion object and that will
lead to power management issues going forward.

To avoid such issues, make pci_enable_device_flags() call
pci_update_current_state() which takes ACPI device power management
into account, if present, to retrieve the current power state of the
device.

Link: https://lore.kernel.org/lkml/20210314000439.3138941-1-luzmaximilian@gmail.com/
Reported-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: mxs-dcp - Use sg_mapping_iter to copy data

[ Upstream commit 2e6d793e1bf07fe5e20cfbbdcec9e1af7e5097eb ]

This uses the sg_pcopy_from_buffer to copy data, instead of doing it
ourselves.

In addition to reducing code size, this fixes the following oops
resulting from failing to kmap the page:

[   68.896381] Unable to handle kernel NULL pointer dereference at virtual address 00000ab8
[   68.904539] pgd = 3561adb3
[   68.907475] [00000ab8] *pgd=00000000
[   68.911153] Internal error: Oops: 805 [#1] ARM
[   68.915618] Modules linked in: cfg80211 rfkill des_generic libdes arc4 libarc4 cbc ecb algif_skcipher sha256_generic libsha256 sha1_generic hmac aes_generic libaes cmac sha512_generic md5 md4 algif_hash af_alg i2c_imx i2c_core ci_hdrc_imx ci_hdrc mxs_dcp ulpi roles udc_core imx_sdma usbmisc_imx usb_common firmware_class virt_dma phy_mxs_usb nf_tables nfnetlink ip_tables x_tables ipv6 autofs4
[   68.950741] CPU: 0 PID: 139 Comm: mxs_dcp_chan/ae Not tainted 5.10.34 #296
[   68.958501] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[   68.964710] PC is at memcpy+0xa8/0x330
[   68.968479] LR is at 0xd7b2bc9d
[   68.971638] pc : [<c053e7c8>]    lr : [<d7b2bc9d>]    psr: 000f0013
[   68.977920] sp : c2cbbee4  ip : 00000010  fp : 00000010
[   68.983159] r10: 00000000  r9 : c3283a40  r8 : 1a5a6f08
[   68.988402] r7 : 4bfe0ecc  r6 : 76d8a220  r5 : c32f9050  r4 : 00000001
[   68.994945] r3 : 00000ab8  r2 : fffffff0  r1 : c32f9050  r0 : 00000ab8
[   69.001492] Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   69.008646] Control: 10c53c7d  Table: 83664059  DAC: 00000051
[   69.014414] Process mxs_dcp_chan/ae (pid: 139, stack limit = 0x667b57ab)
[   69.021133] Stack: (0xc2cbbee4 to 0xc2cbc000)
[   69.025519] bee0:          c32f9050 c3235408 00000010 00000010 00000ab8 00000001 bf10406c
[   69.033720] bf00: 00000000 00000000 00000010 00000000 c32355d0 832fb080 00000000 c13de2fc
[   69.041921] bf20: c3628010 00000010 c33d5780 00000ab8 bf1067e8 00000002 c21e5010 c2cba000
[   69.050125] bf40: c32f8040 00000000 bf106a40 c32f9040 c3283a80 00000001 bf105240 c3234040
[   69.058327] bf60: ffffe000 c3204100 c2c69800 c2cba000 00000000 bf103b84 00000000 c2eddc54
[   69.066530] bf80: c3204144 c0140d1c c2cba000 c2c69800 c0140be8 00000000 00000000 00000000
[   69.074730] bfa0: 00000000 00000000 00000000 c0100114 00000000 00000000 00000000 00000000
[   69.082932] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.091131] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   69.099364] [<c053e7c8>] (memcpy) from [<bf10406c>] (dcp_chan_thread_aes+0x4e8/0x840 [mxs_dcp])
[   69.108117] [<bf10406c>] (dcp_chan_thread_aes [mxs_dcp]) from [<c0140d1c>] (kthread+0x134/0x160)
[   69.116941] [<c0140d1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)
[   69.124178] Exception stack(0xc2cbbfb0 to 0xc2cbbff8)
[   69.129250] bfa0:                                     00000000 00000000 00000000 00000000
[   69.137450] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.145648] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   69.152289] Code: e320f000 e4803004 e4804004 e4805004 (e4806004)

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/hyperv: fix for unwanted manipulation of sched_clock when TSC marked unstable

[ Upstream commit c445535c3efbfb8cb42d098e624d46ab149664b7 ]

Marking TSC as unstable has a side effect of marking sched_clock as
unstable when TSC is still being used as the sched_clock. This is not
desirable. Hyper-V ultimately uses a paravirtualized clock source that
provides a stable scheduler clock even on systems without TscInvariant
CPU capability. Hence, mark_tsc_unstable() call should be called _after_
scheduler clock has been changed to the paravirtualized clocksource. This
will prevent any unwanted manipulation of the sched_clock. Only TSC will
be correctly marked as unstable.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210713030522.1714803-1-ani@anisinha.ca
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix reuse of pinned map on older kernel

[ Upstream commit 97eb31384af943d6b97eb5947262cee4ef25cb87 ]

When loading a BPF program with a pinned map, the loader checks whether
the pinned map can be reused, i.e. their properties match. To derive
such of the pinned map, the loader invokes BPF_OBJ_GET_INFO_BY_FD and
then does the comparison.

Unfortunately, on < 4.12 kernels the BPF_OBJ_GET_INFO_BY_FD is not
available, so loading the program fails with the following error:

libbpf: failed to get map info for map FD 5: Invalid argument
libbpf: couldn't reuse pinned map at
'/sys/fs/bpf/tc/globals/cilium_call_policy': parameter
mismatch"
libbpf: map 'cilium_call_policy': error reusing pinned map
libbpf: map 'cilium_call_policy': failed to create:
Invalid argument(-22)
libbpf: failed to load object 'bpf_overlay.o'

To fix this, fallback to derivation of the map properties via
/proc/$PID/fdinfo/$MAP_FD if BPF_OBJ_GET_INFO_BY_FD fails with EINVAL,
which can be used as an indicator that the kernel doesn't support
the latter.

Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210712125552.58705-1-m@lambda.lt
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dib8000: rewrite the init prbs logic

[ Upstream commit 8db11aebdb8f93f46a8513c22c9bd52fa23263aa ]

The logic at dib8000_get_init_prbs() has a few issues:

1. the tables used there has an extra unused value at the beginning;
2. the dprintk() message doesn't write the right value when
   transmission mode is not 8K;
3. the array overflow validation is done by the callers.

Rewrite the code to fix such issues.

This should also shut up those smatch warnings:

drivers/media/dvb-frontends/dib8000.c:2125 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14
drivers/media/dvb-frontends/dib8000.c:2129 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_2k' 14 <= 14
drivers/media/dvb-frontends/dib8000.c:2131 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_4k' 14 <= 14
drivers/media/dvb-frontends/dib8000.c:2134 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: atmel: ATMEL drivers don't need HAS_DMA

[ Upstream commit 6c5c659dfe3f02e08054a6c20019e3886618b512 ]

On a config (such as arch/sh/) which does not set HAS_DMA when MMU
is not set, several ATMEL ASoC drivers select symbols that cause
kconfig warnings. There is one "depends on HAS_DMA" which is no longer
needed. Dropping it eliminates the kconfig warnings and still builds
with no problems reported.

Fix the following kconfig warnings:

WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_PDC
  Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && HAS_DMA [=n]
  Selected by [m]:
  - SND_ATMEL_SOC_SSC [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m]
  - SND_ATMEL_SOC_SSC_PDC [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m]

WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC_PDC
  Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] && HAS_DMA [=n]
  Selected by [m]:
  - SND_AT91_SOC_SAM9G20_WM8731 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && SND_SOC_I2C_AND_SPI [=m]

WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC
  Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && HAS_DMA [=n]
  Selected by [m]:
  - SND_ATMEL_SOC_SSC_DMA [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m]

WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC_DMA
  Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] && HAS_DMA [=n]
  Selected by [m]:
  - SND_ATMEL_SOC_WM8904 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && I2C [=m]
  - SND_AT91_SOC_SAM9X5_WM8731 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && SND_SOC_I2C_AND_SPI [=m]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707214752.3831-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix amdgpu_ras_eeprom_init()

[ Upstream commit dce4400e6516d18313d23de45b5be8a18980b00e ]

No need to account for the 2 bytes of EEPROM
address--this is now well abstracted away by
the fixes the the lower layers.

Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET

[ Upstream commit 1698ecb218eb82587dbfc71a2e26ded66e5ecf59 ]

Symptom is random switching of speakers when using multichannel.

Repeatedly running speakertest -c8 occasionally starts with
channels jumbled. This is fixed with HD_CTL_WHOLSMP.

The other bit looks beneficial and apears harmless in testing so
I'd suggest adding it too.

Documentation says: HD_CTL_WHILSMP_SET
Wait for whole sample. When this bit is set MAI transmit will start
only when there is at least one whole sample available in the fifo.

Documentation says: HD_CTL_CHALIGN_SET
Channel Align When Overflow. This bit is used to realign the audio
channels in case of an overflow.
If this bit is set, after the detection of an overflow, equal
amount of dummy words to the missing words will be written to fifo,
filling up the broken sample and maintaining alignment.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-7-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

userfaultfd: prevent concurrent API initialization

[ Upstream commit 22e5fe2a2a279d9a6fcbdfb4dffe73821bef1c90 ]

userfaultfd assumes that the enabled features are set once and never
changed after UFFDIO_API ioctl succeeded.

However, currently, UFFDIO_API can be called concurrently from two
different threads, succeed on both threads and leave userfaultfd's
features in non-deterministic state.  Theoretically, other uffd operations
(ioctl's and page-faults) can be dispatched while adversely affected by
such changes of features.

Moreover, the writes to ctx->state and ctx->features are not ordered,
which can - theoretically, again - let userfaultfd_ioctl() think that
userfaultfd API completed, while the features are still not initialized.

To avoid races, it is arguably best to get rid of ctx->state.  Since there
are only 2 states, record the API initialization in ctx->features as the
uppermost bit and remove ctx->state.

Link: https://lkml.kernel.org/r/20210808020724.1022515-3-namit@vmware.com
Fixes: 9cd75c3cd4c3d ("userfaultfd: non-cooperative: add ability to report non-PF events from uffd descriptor")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y

[ Upstream commit 52d83df682c82055961531853c066f4f16e234ea ]

When CONFIG_TRIM_UNUSED_KSYMS is enabled, I see some warnings like this:

  nm: arch/x86/entry/vdso/vdso32/note.o: no symbols

$NM (both GNU nm and llvm-nm) warns when no symbol is found in the
object. Suppress the stderr.

Fangrui Song mentioned binutils>=2.37 `nm -q` can be used to suppress
"no symbols" [1], and llvm-nm>=13.0.0 supports -q as well.

We cannot use it for now, but note it as a TODO.

[1]: https://sourceware.org/bugzilla/show_bug.cgi?id=27408

Fixes: bbda5ec671d3 ("kbuild: simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Malta: fix alignment of the devicetree buffer

[ Upstream commit bea6a94a279bcbe6b2cde348782b28baf12255a5 ]

Starting with following patch MIPS Malta is not able to boot:
| commit 79edff12060fe7772af08607eff50c0e2486c5ba
| Author: Rob Herring <robh@kernel.org>
| scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9

The reason is the alignment test added to the fdt_ro_probe_(). To fix
this issue, we need to make sure that fdt_buf is aligned.

Since the dtc patch was designed to uncover potential issue, I handle
initial MIPS Malta patch as initial bug.

Fixes: e81a8c7dabac ("MIPS: Malta: Setup RAM regions via DT")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: should put a page beyond EOF when preparing a write

[ Upstream commit 9605f75cf36e0bcc0f4ada07b5be712d30107607 ]

The prepare_compress_overwrite() gets/locks a page to prepare a read, and calls
f2fs_read_multi_pages() which checks EOF first. If there's any page beyond EOF,
we unlock the page and set cc->rpages[i] = NULL, which we can't put the page
anymore. This makes page leak, so let's fix by putting that page.

Fixes: a949dc5f2c5c ("f2fs: compress: fix race condition of overwrite vs truncate")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: deallocate compressed pages when error happens

[ Upstream commit 827f02842e40ea2e00f401e8f4cb1bccf3b8cd86 ]

In f2fs_write_multi_pages(), f2fs_compress_pages() allocates pages for
compression work in cc->cpages[]. Then, f2fs_write_compressed_pages() initiates
bio submission. But, if there's any error before submitting the IOs like early
f2fs_cp_error(), previously it didn't free cpages by f2fs_compress_free_page().
Let's fix memory leak by putting that just before deallocating cc->cpages.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to unmap pages from userspace process in punch_hole()

[ Upstream commit c8dc3047c48540183744f959412d44b08c5435e1 ]

We need to unmap pages from userspace process before removing pagecache
in punch_hole() like we did in f2fs_setattr().

Similar change:
commit 5e44f8c374dc ("ext4: hole-punch use truncate_pagecache_range")

Fixes: fbfa2cc58d53 ("f2fs: add file operations")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix unexpected ENOENT comes from f2fs_map_blocks()

[ Upstream commit adf9ea89c719c1d23794e363f631e376b3ff8cbc ]

In below path, it will return ENOENT if filesystem is shutdown:

- f2fs_map_blocks
 - f2fs_get_dnode_of_data
  - f2fs_get_node_page
   - __get_node_page
    - read_node_page
     - is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN)
       return -ENOENT
 - force return value from ENOENT to 0

It should be fine for read case, since it indicates a hole condition,
and caller could use .m_next_pgofs to skip the hole and continue the
lookup.

However it may cause confusing for write case, since leaving a hole
there, and said nothing was wrong doesn't help.

There is at least one case from dax_iomap_actor() will complain that,
so fix this in prior to supporting dax in f2fs.

xfstest generic/388 reports below warning:

ubuntu godown: xfstests-induced forced shutdown of /mnt/scratch_f2fs:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 485833 at fs/dax.c:1127 dax_iomap_actor+0x339/0x370
Call Trace:
 iomap_apply+0x1c4/0x7b0
 ? dax_iomap_rw+0x1c0/0x1c0
 dax_iomap_rw+0xad/0x1c0
 ? dax_iomap_rw+0x1c0/0x1c0
 f2fs_file_write_iter+0x5ab/0x970 [f2fs]
 do_iter_readv_writev+0x273/0x2e0
 do_iter_write+0xab/0x1f0
 vfs_iter_write+0x21/0x40
 iter_file_splice_write+0x287/0x540
 do_splice+0x37c/0xa60
 __x64_sys_splice+0x15f/0x3a0
 do_syscall_64+0x3b/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae

ubuntu godown: xfstests-induced forced shutdown of /mnt/scratch_f2fs:
------------[ cut here ]------------
RIP: 0010:dax_iomap_pte_fault.isra.0+0x72e/0x14a0
Call Trace:
 dax_iomap_fault+0x44/0x70
 f2fs_dax_huge_fault+0x155/0x400 [f2fs]
 f2fs_dax_fault+0x18/0x30 [f2fs]
 __do_fault+0x4e/0x120
 do_fault+0x3cf/0x7a0
 __handle_mm_fault+0xa8c/0xf20
 ? find_held_lock+0x39/0xd0
 handle_mm_fault+0x1b6/0x480
 do_user_addr_fault+0x320/0xcd0
 ? rcu_read_lock_sched_held+0x67/0xc0
 exc_page_fault+0x77/0x3f0
 ? asm_exc_page_fault+0x8/0x30
 asm_exc_page_fault+0x1e/0x30

Fixes: 83a3bfdb5a8a ("f2fs: indicate shutdown f2fs to allow unmount successfully")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>