platform/kernel/linux-rpi.git
4 years agoarm64: perf: Add missing ISB in armv8pmu_enable_counter()
Alexandru Elisei [Thu, 24 Sep 2020 11:07:00 +0000 (12:07 +0100)]
arm64: perf: Add missing ISB in armv8pmu_enable_counter()

Writes to the PMXEVTYPER_EL0 register are not self-synchronising. In
armv8pmu_enable_event(), the PE can reorder configuring the event type
after we have enabled the counter and the interrupt. This can lead to an
interrupt being asserted because of the previous event type that we were
counting using the same counter, not the one that we've just configured.

The same rationale applies to writes to the PMINTENSET_EL1 register. The PE
can reorder enabling the interrupt at any point in the future after we have
enabled the event.

Prevent both situations from happening by adding an ISB just before we
enable the event counter.

Fixes: 030896885ade ("arm64: Performance counters support")
Reported-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org> (Developerbox)
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200924110706.254996-2-alexandru.elisei@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
4 years agoperf: Add Arm CMN-600 PMU driver
Robin Murphy [Fri, 18 Sep 2020 13:28:38 +0000 (14:28 +0100)]
perf: Add Arm CMN-600 PMU driver

Initial driver for PMU event counting on the Arm CMN-600 interconnect.
CMN sports an obnoxiously complex distributed PMU system as part of
its debug and trace features, which can do all manner of things like
sampling, cross-triggering and generating CoreSight trace. This driver
covers the PMU functionality, plus the relevant aspects of watchpoints
for simply counting matching flits.

Tested-by: Tsahi Zidenberg <tsahee@amazon.com>
Tested-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
4 years agoperf: Add Arm CMN-600 DT binding
Robin Murphy [Fri, 18 Sep 2020 18:24:09 +0000 (19:24 +0100)]
perf: Add Arm CMN-600 DT binding

Document the requirements for the CMN-600 DT binding. The internal
topology is almost entirely discoverable by walking a tree of ID
registers, but sadly both the starting point for that walk and the
exact format of those registers are configuration-dependent and not
discoverable from some sane fixed location. Oh well.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
4 years agoarm64: perf: Add support caps under sysfs
Shaokun Zhang [Tue, 22 Sep 2020 05:53:45 +0000 (13:53 +0800)]
arm64: perf: Add support caps under sysfs

ARMv8.4-PMU introduces the PMMIR_EL1 registers and some new PMU events,
like STALL_SLOT etc, are related to it. Let's add a caps directory to
/sys/bus/event_source/devices/armv8_pmuv3_0/ and support slots from
PMMIR_EL1 registers in this entry. The user programs can get the slots
from sysfs directly.

/sys/bus/event_source/devices/armv8_pmuv3_0/caps/slots is exposed
under sysfs. Both ARMv8.4-PMU and STALL_SLOT event are implemented,
it returns the slots from PMMIR_EL1, otherwise it will return 0.

Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1600754025-53535-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
4 years agodrivers/perf: thunderx2_pmu: Fix memory resource error handling
Mark Salter [Tue, 15 Sep 2020 20:41:10 +0000 (16:41 -0400)]
drivers/perf: thunderx2_pmu: Fix memory resource error handling

In tx2_uncore_pmu_init_dev(), a call to acpi_dev_get_resources() is used
to create a list _CRS resources which is searched for the device base
address. There is an error check following this:

   if (!rentry->res)
           return NULL

In no case, will rentry->res be NULL, so the test is useless. Even
if the test worked, it comes before the resource list memory is
freed. None of this really matters as long as the ACPI table has
the memory resource. Let's clean it up so that it makes sense and
will give a meaningful error should firmware leave out the memory
resource.

Fixes: 69c32972d593 ("drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver")
Signed-off-by: Mark Salter <msalter@redhat.com>
Link: https://lore.kernel.org/r/20200915204110.326138-2-msalter@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
4 years agodrivers/perf: xgene_pmu: Fix uninitialized resource struct
Mark Salter [Tue, 15 Sep 2020 20:41:09 +0000 (16:41 -0400)]
drivers/perf: xgene_pmu: Fix uninitialized resource struct

This splat was reported on newer Fedora kernels booting on certain
X-gene based machines:

 xgene-pmu APMC0D83:00: X-Gene PMU version 3
 Unable to handle kernel read from unreadable memory at virtual \
 address 0000000000004006
 ...
 Call trace:
  string+0x50/0x100
  vsnprintf+0x160/0x750
  devm_kvasprintf+0x5c/0xb4
  devm_kasprintf+0x54/0x60
  __devm_ioremap_resource+0xdc/0x1a0
  devm_ioremap_resource+0x14/0x20
  acpi_get_pmu_hw_inf.isra.0+0x84/0x15c
  acpi_pmu_dev_add+0xbc/0x21c
  acpi_ns_walk_namespace+0x16c/0x1e4
  acpi_walk_namespace+0xb4/0xfc
  xgene_pmu_probe_pmu_dev+0x7c/0xe0
  xgene_pmu_probe.part.0+0x2c0/0x310
  xgene_pmu_probe+0x54/0x64
  platform_drv_probe+0x60/0xb4
  really_probe+0xe8/0x4a0
  driver_probe_device+0xe4/0x100
  device_driver_attach+0xcc/0xd4
  __driver_attach+0xb0/0x17c
  bus_for_each_dev+0x6c/0xb0
  driver_attach+0x30/0x40
  bus_add_driver+0x154/0x250
  driver_register+0x84/0x140
  __platform_driver_register+0x54/0x60
  xgene_pmu_driver_init+0x28/0x34
  do_one_initcall+0x40/0x204
  do_initcalls+0x104/0x144
  kernel_init_freeable+0x198/0x210
  kernel_init+0x20/0x12c
  ret_from_fork+0x10/0x18
 Code: 91000400 110004e1 eb08009f 540000c0 (38646846)
 ---[ end trace f08c10566496a703 ]---

This is due to use of an uninitialized local resource struct in the xgene
pmu driver. The thunderx2_pmu driver avoids this by using the resource list
constructed by acpi_dev_get_resources() rather than using a callback from
that function. The callback in the xgene driver didn't fully initialize
the resource. So get rid of the callback and search the resource list as
done by thunderx2.

Fixes: 832c927d119b ("perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver")
Signed-off-by: Mark Salter <msalter@redhat.com>
Link: https://lore.kernel.org/r/20200915204110.326138-1-msalter@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
4 years agoperf: arm_dsu: Support DSU ACPI devices
Tuan Phan [Mon, 14 Sep 2020 18:04:16 +0000 (11:04 -0700)]
perf: arm_dsu: Support DSU ACPI devices

Add support for probing device from ACPI node.
Each DSU ACPI node and its associated cpus are inside a cluster node.

Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1600106656-9542-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
4 years agoarm64: perf: Remove unnecessary event_idx check
Qi Liu [Fri, 4 Sep 2020 09:57:38 +0000 (17:57 +0800)]
arm64: perf: Remove unnecessary event_idx check

event_idx is obtained from armv8pmu_get_event_idx(), and this idx must be
between ARMV8_IDX_CYCLE_COUNTER and cpu_pmu->num_events. So it's unnecessary
to do this check. Let's remove it.

Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1599213458-28394-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
4 years agodrivers/perf: hisi: Add missing include of linux/module.h
Shaokun Zhang [Fri, 4 Sep 2020 02:21:37 +0000 (10:21 +0800)]
drivers/perf: hisi: Add missing include of linux/module.h

MODULE_*** is used in HiSilicon uncore PMU drivers and is provided by
linux/module.h, but the header file is not directly included. Add the
missing include.

Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1599186097-18599-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
4 years agoarm64: perf: Add general hardware LLC events for PMUv3
Leo Yan [Tue, 11 Aug 2020 05:35:05 +0000 (13:35 +0800)]
arm64: perf: Add general hardware LLC events for PMUv3

This patch is to add the general hardware last level cache (LLC) events
for PMUv3: one event is for LLC access and another is for LLC miss.

With this change, perf tool can support last level cache profiling,
below is an example to demonstrate the usage on Arm64:

  $ perf stat -e LLC-load-misses -e LLC-loads -- \
  perf bench mem memcpy -s 1024MB -l 100 -f default

  [...]

    Performance counter stats for 'perf bench mem memcpy -s 1024MB -l 100 -f default':

        35,534,262      LLC-load-misses           #    2.16% of all LL-cache hits
     1,643,946,443      LLC-loads

  [...]

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20200811053505.21223-1-leo.yan@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
4 years agoLinux 5.9-rc3
Linus Torvalds [Sun, 30 Aug 2020 23:01:54 +0000 (16:01 -0700)]
Linux 5.9-rc3

4 years agoMerge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Sun, 30 Aug 2020 22:53:44 +0000 (15:53 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:

 - fix regression in af_alg that affects iwd

 - restore polling delay in qat

 - fix double free in ingenic on error path

 - fix potential build failure in sa2ul due to missing Kconfig dependency

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: af_alg - Work around empty control messages without MSG_MORE
  crypto: sa2ul - add Kconfig selects to fix build error
  crypto: ingenic - Drop kfree for memory allocated with devm_kzalloc
  crypto: qat - add delay before polling mailbox

4 years agoMerge tag 'x86-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 30 Aug 2020 19:01:23 +0000 (12:01 -0700)]
Merge tag 'x86-urgent-2020-08-30' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "Three interrupt related fixes for X86:

   - Move disabling of the local APIC after invoking fixup_irqs() to
     ensure that interrupts which are incoming are noted in the IRR and
     not ignored.

   - Unbreak affinity setting.

     The rework of the entry code reused the regular exception entry
     code for device interrupts. The vector number is pushed into the
     errorcode slot on the stack which is then lifted into an argument
     and set to -1 because that's regs->orig_ax which is used in quite
     some places to check whether the entry came from a syscall.

     But it was overlooked that orig_ax is used in the affinity cleanup
     code to validate whether the interrupt has arrived on the new
     target. It turned out that this vector check is pointless because
     interrupts are never moved from one vector to another on the same
     CPU. That check is a historical leftover from the time where x86
     supported multi-CPU affinities, but not longer needed with the now
     strict single CPU affinity. Famous last words ...

   - Add a missing check for an empty cpumask into the matrix allocator.

     The affinity change added a warning to catch the case where an
     interrupt is moved on the same CPU to a different vector. This
     triggers because a condition with an empty cpumask returns an
     assignment from the allocator as the allocator uses for_each_cpu()
     without checking the cpumask for being empty. The historical
     inconsistent for_each_cpu() behaviour of ignoring the cpumask and
     unconditionally claiming that CPU0 is in the mask struck again.
     Sigh.

  plus a new entry into the MAINTAINER file for the HPE/UV platform"

* tag 'x86-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/matrix: Deal with the sillyness of for_each_cpu() on UP
  x86/irq: Unbreak interrupt affinity setting
  x86/hotplug: Silence APIC only after all interrupts are migrated
  MAINTAINERS: Add entry for HPE Superdome Flex (UV) maintainers

4 years agoMerge tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 30 Aug 2020 18:56:54 +0000 (11:56 -0700)]
Merge tag 'irq-urgent-2020-08-30' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Revert the platform driver conversion of interrupt chip drivers as
     it turned out to create more problems than it solves.

   - Fix a trivial typo in the new module helpers which made probing
     reliably fail.

   - Small fixes in the STM32 and MIPS Ingenic drivers

   - The TI firmware rework which had badly managed dependencies and had
     to wait post rc1"

* tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/ingenic: Leave parent IRQ unmasked on suspend
  irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake
  irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse
  irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers
  arm64: dts: k3-am65: Update the RM resource types
  arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
  arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
  irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
  irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field
  dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml
  dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent.
  irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
  dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml
  dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent
  firmware: ti_sci: Add support for getting resource with subtype
  firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
  firmware: ti_sci: Drop the device id to resource type translation

4 years agoMerge tag 'sched-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 30 Aug 2020 18:50:53 +0000 (11:50 -0700)]
Merge tag 'sched-urgent-2020-08-30' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Thomas Gleixner:
 "A single fix for the scheduler:

   - Make is_idle_task() __always_inline to prevent the compiler from
     putting it out of line into the wrong section because it's used
     inside noinstr sections"

* tag 'sched-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Use __always_inline on is_idle_task()

4 years agoMerge tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 30 Aug 2020 18:43:50 +0000 (11:43 -0700)]
Merge tag 'locking-urgent-2020-08-30' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "A set of fixes for lockdep, tracing and RCU:

   - Prevent recursion by using raw_cpu_* operations

   - Fixup the interrupt state in the cpu idle code to be consistent

   - Push rcu_idle_enter/exit() invocations deeper into the idle path so
     that the lock operations are inside the RCU watching sections

   - Move trace_cpu_idle() into generic code so it's called before RCU
     goes idle.

   - Handle raw_local_irq* vs. local_irq* operations correctly

   - Move the tracepoints out from under the lockdep recursion handling
     which turned out to be fragile and inconsistent"

* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep,trace: Expose tracepoints
  lockdep: Only trace IRQ edges
  mips: Implement arch_irqs_disabled()
  arm64: Implement arch_irqs_disabled()
  nds32: Implement arch_irqs_disabled()
  locking/lockdep: Cleanup
  x86/entry: Remove unused THUNKs
  cpuidle: Move trace_cpu_idle() into generic code
  cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
  sched,idle,rcu: Push rcu_idle deeper into the idle path
  cpuidle: Fixup IRQ state
  lockdep: Use raw_cpu_*() for per-cpu variables

4 years agoMerge tag '5.9-rc2-smb-fix' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Sun, 30 Aug 2020 18:38:21 +0000 (11:38 -0700)]
Merge tag '5.9-rc2-smb-fix' of git://git.samba.org/sfrench/cifs-2.6

Pull cfis fix from Steve French:
 "DFS fix for referral problem when using SMB1"

* tag '5.9-rc2-smb-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix check of tcon dfs in smb1

4 years agoMerge tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Sun, 30 Aug 2020 17:56:12 +0000 (10:56 -0700)]
Merge tag 'powerpc-5.9-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Revert our removal of PROT_SAO, at least one user expressed an
   interest in using it on Power9. Instead don't allow it to be used in
   guests unless enabled explicitly at compile time.

 - A fix for a crash introduced by a recent change to FP handling.

 - Revert a change to our idle code that left Power10 with no idle
   support.

 - One minor fix for the new scv system call path to set PPR.

 - Fix a crash in our "generic" PMU if branch stack events were enabled.

 - A fix for the IMC PMU, to correctly identify host kernel samples.

 - The ADB_PMU powermac code was found to be incompatible with
   VMAP_STACK, so make them incompatible in Kconfig until the code can
   be fixed.

 - A build fix in drivers/video/fbdev/controlfb.c, and a documentation
   fix.

Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.

* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
  Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
  powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
  powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
  powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
  powerpc/64s: scv entry should set PPR
  Documentation/powerpc: fix malformed table in syscall64-abi
  video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
  selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
  powerpc/64s: Disallow PROT_SAO in LPARs by default
  Revert "powerpc/64s: Remove PROT_SAO support"

4 years agoMerge tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Sun, 30 Aug 2020 17:51:03 +0000 (10:51 -0700)]
Merge tag 'usb-5.9-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Let's try this again...  Here are some USB fixes for 5.9-rc3.

  This differs from the previous pull request for this release in that
  the usb gadget patch now does not break some systems, and actually
  does what it was intended to do. Many thanks to Marek Szyprowski for
  quickly noticing and testing the patch from Andy Shevchenko to resolve
  this issue.

  Additionally, some more new USB quirks have been added to get some new
  devices to work properly based on user reports.

  Other than that, the patches are all here, and they contain:

   - usb gadget driver fixes

   - xhci driver fixes

   - typec fixes

   - new quirks and ids

   - fixes for USB patches that went into 5.9-rc1.

  All of these have been tested in linux-next with no reported issues"

* tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: storage: Add unusual_uas entry for Sony PSZ drives
  USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge
  usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()
  USB: gadget: u_f: Unbreak offset calculation in VLAs
  USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D
  usb: typec: tcpm: Fix Fix source hard reset response for TDA 2.3.1.1 and TDA 2.3.1.2 failures
  USB: PHY: JZ4770: Fix static checker warning.
  USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()
  USB: gadget: u_f: add overflow checks to VLA macros
  xhci: Always restore EP_SOFT_CLEAR_TOGGLE even if ep reset failed
  xhci: Do warm-reset when both CAS and XDEV_RESUME are set
  usb: host: xhci: fix ep context print mismatch in debugfs
  usb: uas: Add quirk for PNY Pro Elite
  tools: usb: move to tools buildsystem
  USB: Fix device driver race
  USB: Also match device drivers using the ->match vfunc
  usb: host: xhci-tegra: fix tegra_xusb_get_phy()
  usb: host: xhci-tegra: otg usb2/usb3 port init
  usb: hcd: Fix use after free in usb_hcd_pci_remove()
  usb: typec: ucsi: Hold con->lock for the entire duration of ucsi_register_port()
  ...

4 years agoMerge tag 'edac_urgent_for_v5.9_rc3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 30 Aug 2020 17:47:23 +0000 (10:47 -0700)]
Merge tag 'edac_urgent_for_v5.9_rc3' of git://git./linux/kernel/git/ras/ras

Pull EDAC fix from Borislav Petkov:
 "A fix to properly clear ghes_edac driver state on driver remove so
  that a subsequent load can probe the system properly (Shiju Jose)"

* tag 'edac_urgent_for_v5.9_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()

4 years agoMerge tag 'dma-mapping-5.9-2' of git://git.infradead.org/users/hch/dma-mapping
Linus Torvalds [Sun, 30 Aug 2020 17:37:18 +0000 (10:37 -0700)]
Merge tag 'dma-mapping-5.9-2' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a possibly uninitialized variable (Dan Carpenter)"

* tag 'dma-mapping-5.9-2' of git://git.infradead.org/users/hch/dma-mapping:
  dma-pool: Fix an uninitialized variable bug in atomic_pool_expand()

4 years agogenirq/matrix: Deal with the sillyness of for_each_cpu() on UP
Thomas Gleixner [Sun, 30 Aug 2020 17:07:53 +0000 (19:07 +0200)]
genirq/matrix: Deal with the sillyness of for_each_cpu() on UP

Most of the CPU mask operations behave the same way, but for_each_cpu() and
it's variants ignore the cpumask argument and claim that CPU0 is always in
the mask. This is historical, inconsistent and annoying behaviour.

The matrix allocator uses for_each_cpu() and can be called on UP with an
empty cpumask. The calling code does not expect that this succeeds but
until commit e027fffff799 ("x86/irq: Unbreak interrupt affinity setting")
this went unnoticed. That commit added a WARN_ON() to catch cases which
move an interrupt from one vector to another on the same CPU. The warning
triggers on UP.

Add a check for the cpumask being empty to prevent this.

Fixes: 2f75d9e1c905 ("genirq: Implement bitmap matrix allocator")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
4 years agoMerge tag 'fallthrough-fixes-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 29 Aug 2020 21:21:58 +0000 (14:21 -0700)]
Merge tag 'fallthrough-fixes-5.9-rc3' of git://git./linux/kernel/git/gustavoars/linux

Pull fallthrough fixes from Gustavo A. R. Silva:
 "Fix some minor issues introduced by the recent treewide fallthrough
  conversions:

   - Fix identation issue

   - Fix erroneous fallthrough annotation

   - Remove unnecessary fallthrough annotation

   - Fix code comment changed by fallthrough conversion"

* tag 'fallthrough-fixes-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  arm64/cpuinfo: Remove unnecessary fallthrough annotation
  media: dib0700: Fix identation issue in dib8096_set_param_override()
  afs: Remove erroneous fallthough annotation
  iio: dpot-dac: fix code comment in dpot_dac_read_raw()

4 years agofsldma: fix very broken 32-bit ppc ioread64 functionality
Linus Torvalds [Sat, 29 Aug 2020 20:50:56 +0000 (13:50 -0700)]
fsldma: fix very broken 32-bit ppc ioread64 functionality

Commit ef91bb196b0d ("kernel.h: Silence sparse warning in
lower_32_bits") caused new warnings to show in the fsldma driver, but
that commit was not to blame: it only exposed some very incorrect code
that tried to take the low 32 bits of an address.

That made no sense for multiple reasons, the most notable one being that
that code was intentionally limited to only 32-bit ppc builds, so "only
low 32 bits of an address" was completely nonsensical.  There were no
high bits to mask off to begin with.

But even more importantly fropm a correctness standpoint, turning the
address into an integer then caused the subsequent address arithmetic to
be completely wrong too, and the "+1" actually incremented the address
by one, rather than by four.

Which again was incorrect, since the code was reading two 32-bit values
and trying to make a 64-bit end result of it all.  Surprisingly, the
iowrite64() did not suffer from the same odd and incorrect model.

This code has never worked, but it's questionable whether anybody cared:
of the two users that actually read the 64-bit value (by way of some C
preprocessor hackery and eventually the 'get_cdar()' inline function),
one of them explicitly ignored the value, and the other one might just
happen to work despite the incorrect value being read.

This patch at least makes it not fail the build any more, and makes the
logic superficially sane.  Whether it makes any difference to the code
_working_ or not shall remain a mystery.

Compile-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMerge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa...
Linus Torvalds [Sat, 29 Aug 2020 20:13:44 +0000 (13:13 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "A core fix for ACPI matching and two driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: iproc: Fix shifting 31 bits
  i2c: rcar: in slave mode, clear NACK earlier
  i2c: acpi: Remove dead code, i.e. i2c_acpi_match_device()
  i2c: core: Don't fail PRP0001 enumeration when no ID table exist

4 years agoMerge tag 's390-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Sat, 29 Aug 2020 19:51:58 +0000 (12:51 -0700)]
Merge tag 's390-5.9-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Disable preemption trace in percpu macros since the lockdep code
   itself uses percpu variables now and it causes recursions.

 - Fix kernel space 4-level paging broken by recent vmem rework.

* tag 's390-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vmem: fix vmem_add_range for 4-level paging
  s390: don't trace preemption in percpu macros

4 years agoMerge tag 'for-linus-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 29 Aug 2020 19:44:30 +0000 (12:44 -0700)]
Merge tag 'for-linus-5.9-rc3-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
 "Two fixes for Xen: one needed for ongoing work to support virtio with
  Xen, and one for a corner case in IRQ handling with Xen"

* tag 'for-linus-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: Add misuse warning to virt_to_gfn
  xen/xenbus: Fix granting of vmalloc'd memory
  XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.

4 years agoMerge tag 'hwmon-for-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Sat, 29 Aug 2020 19:37:00 +0000 (12:37 -0700)]
Merge tag 'hwmon-for-v5.9-rc3' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix tempeerature scale in gsc-hwmon driver

 - Fix divide by 0 error in nct7904 driver

 - Drop non-existing attribute from pmbus/isl68137 driver

 - Fix status check in applesmc driver

* tag 'hwmon-for-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (gsc-hwmon) Scale temperature to millidegrees
  hwmon: (applesmc) check status earlier.
  hwmon: (nct7904) Correct divide by 0
  hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_1 telemetry for RAA228228

4 years agoMerge tag 'block-5.9-2020-08-28' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 28 Aug 2020 23:38:29 +0000 (16:38 -0700)]
Merge tag 'block-5.9-2020-08-28' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - nbd timeout fix (Hou)

 - device size fix for loop LOOP_CONFIGURE (Martijn)

 - MD pull from Song with raid5 stripe size fix (Yufen)

* tag 'block-5.9-2020-08-28' of git://git.kernel.dk/linux-block:
  md/raid5: make sure stripe_size as power of two
  loop: Set correct device size when using LOOP_CONFIGURE
  nbd: restore default timeout when setting it to zero

4 years agoMerge tag 'io_uring-5.9-2020-08-28' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 28 Aug 2020 23:23:16 +0000 (16:23 -0700)]
Merge tag 'io_uring-5.9-2020-08-28' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "A few fixes in here, all based on reports and test cases from folks
  using it. Most of it is stable material as well:

   - Hashed work cancelation fix (Pavel)

   - poll wakeup signalfd fix

   - memlock accounting fix

   - nonblocking poll retry fix

   - ensure we never return -ERESTARTSYS for reads

   - ensure offset == -1 is consistent with preadv2() as documented

   - IOPOLL -EAGAIN handling fixes

   - remove useless task_work bounce for block based -EAGAIN retry"

* tag 'io_uring-5.9-2020-08-28' of git://git.kernel.dk/linux-block:
  io_uring: don't bounce block based -EAGAIN retry off task_work
  io_uring: fix IOPOLL -EAGAIN retries
  io_uring: clear req->result on IOPOLL re-issue
  io_uring: make offset == -1 consistent with preadv2/pwritev2
  io_uring: ensure read requests go through -ERESTART* transformation
  io_uring: don't use poll handler if file can't be nonblocking read/written
  io_uring: fix imbalanced sqo_mm accounting
  io_uring: revert consumed iov_iter bytes on error
  io-wq: fix hang after cancelling pending hashed work
  io_uring: don't recurse on tsk->sighand->siglock with signalfd

4 years agoMerge tag 'devprop-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Fri, 28 Aug 2020 20:23:31 +0000 (13:23 -0700)]
Merge tag 'devprop-5.9-rc3' of git://git./linux/kernel/git/rafael/linux-pm

Pull device properties framework fix from Rafael Wysocki:
 "Prevent the promotion of the secondary firmware node of a device to
  the primary one from leaking a pointer (Heikki Krogerus)"

* tag 'devprop-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: Fix the secondary firmware node handling in set_primary_fwnode()

4 years agoMerge tag 'acpi-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Fri, 28 Aug 2020 20:17:14 +0000 (13:17 -0700)]
Merge tag 'acpi-5.9-rc3' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "These fix two recent issues in the ACPI memory mappings management
  code and tighten up error handling in the ACPI driver for AMD SoCs
  (APD).

  Specifics:

   - Avoid redundant rounding to the page size in acpi_os_map_iomem() to
     address a recently introduced issue with the EFI memory map
     permission check on ARM64 (Ard Biesheuvel).

   - Fix acpi_release_memory() to wait until the memory mappings
     released by it have been really unmapped (Rafael Wysocki).

   - Make the ACPI driver for AMD SoCs (APD) check the return value of
     acpi_dev_get_property() to avoid failures in the cases when the
     device property under inspection is missing (Furquan Shaikh)"

* tag 'acpi-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: OSL: Prevent acpi_release_memory() from returning too early
  ACPI: ioremap: avoid redundant rounding to OS page size
  ACPI: SoC: APD: Check return value of acpi_dev_get_property()

4 years agoMerge tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Fri, 28 Aug 2020 20:12:09 +0000 (13:12 -0700)]
Merge tag 'pm-5.9-rc3' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix the recently added Tegra194 cpufreq driver and the handling
  of devices using runtime PM during system-wide suspend, improve the
  intel_pstate driver documentation and clean up the cpufreq core.

  Specifics:

   - Make the recently added Tegra194 cpufreq driver use
     read_cpuid_mpir() instead of cpu_logical_map() to avoid exporting
     logical_cpu_map (Sumit Gupta).

   - Drop the automatic system wakeup event reporting for devices with
     pending runtime-resume requests during system-wide suspend to avoid
     spurious aborts of the suspend flow (Rafael Wysocki).

   - Fix build warning in the intel_pstate driver documentation and
     improve the wording in there (Randy Dunlap).

   - Clean up two pieces of code in the cpufreq core (Viresh Kumar)"

* tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Use WARN_ON_ONCE() for invalid relation
  cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
  PM: sleep: core: Fix the handling of pending runtime resume requests
  Documentation: fix pm/intel_pstate build warning and wording
  cpufreq: replace cpu_logical_map() with read_cpuid_mpir()

4 years agoMerge branch 'acpi-mm'
Rafael J. Wysocki [Fri, 28 Aug 2020 19:17:56 +0000 (21:17 +0200)]
Merge branch 'acpi-mm'

* acpi-mm:
  ACPI: OSL: Prevent acpi_release_memory() from returning too early
  ACPI: ioremap: avoid redundant rounding to OS page size

4 years agoMerge branch 'pm-cpufreq'
Rafael J. Wysocki [Fri, 28 Aug 2020 18:58:16 +0000 (20:58 +0200)]
Merge branch 'pm-cpufreq'

* pm-cpufreq:
  cpufreq: Use WARN_ON_ONCE() for invalid relation
  cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
  Documentation: fix pm/intel_pstate build warning and wording
  cpufreq: replace cpu_logical_map() with read_cpuid_mpir()

4 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Fri, 28 Aug 2020 18:37:33 +0000 (11:37 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

 - Fix kernel build with the integrated LLVM assembler which doesn't see
   the -Wa,-march option.

 - Fix "make vdso_install" when COMPAT_VDSO is disabled.

 - Make KVM more robust if the AT S1E1R instruction triggers an
   exception (architecture corner cases).

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception
  KVM: arm64: Survive synchronous exceptions caused by AT instructions
  KVM: arm64: Add kvm_extable for vaxorcism code
  arm64: vdso32: make vdso32 install conditional
  arm64: use a common .arch preamble for inline assembly

4 years agokernel.h: Silence sparse warning in lower_32_bits
Herbert Xu [Fri, 28 Aug 2020 07:11:25 +0000 (17:11 +1000)]
kernel.h: Silence sparse warning in lower_32_bits

I keep getting sparse warnings in crypto such as:

  CHECK   drivers/crypto/ccree/cc_hash.c
   drivers/crypto/ccree/cc_hash.c:49:9: warning: cast truncates bits from constant value (47b5481dbefa4fa4 becomes befa4fa4)
   drivers/crypto/ccree/cc_hash.c:49:26: warning: cast truncates bits from constant value (db0c2e0d64f98fa7 becomes 64f98fa7)
   [.. many more ..]

This patch removes the warning by adding a mask to keep sparse
happy.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMerge tag 'writeback_for_v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 28 Aug 2020 17:57:14 +0000 (10:57 -0700)]
Merge tag 'writeback_for_v5.9-rc3' of git://git./linux/kernel/git/jack/linux-fs

Pull writeback fixes from Jan Kara:
 "Fixes for writeback code occasionally skipping writeback of some
  inodes or livelocking sync(2)"

* tag 'writeback_for_v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  writeback: Drop I_DIRTY_TIME_EXPIRE
  writeback: Fix sync livelock due to b_dirty_time processing
  writeback: Avoid skipping inode writeback
  writeback: Protect inode->i_io_list with inode->i_lock

4 years agoMerge tag 'gfs2-v5.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 28 Aug 2020 17:41:00 +0000 (10:41 -0700)]
Merge tag 'gfs2-v5.9-rc2-fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fix from Andreas Gruenbacher:
 "Fix a memory leak on filesystem withdraw.

  We didn't detect this bug because we have slab merging on by default
  (CONFIG_SLAB_MERGE_DEFAULT). Adding 'slub_nomerge' to the kernel
  command line exposed the problem"

* tag 'gfs2-v5.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: add some much needed cleanup for log flushes that fail

4 years agoMerge tag 'ceph-for-5.9-rc3' of git://github.com/ceph/ceph-client
Linus Torvalds [Fri, 28 Aug 2020 17:33:04 +0000 (10:33 -0700)]
Merge tag 'ceph-for-5.9-rc3' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "We have an inode number handling change, prompted by s390x which is a
  64-bit architecture with a 32-bit ino_t, a patch to disallow leases to
  avoid potential data integrity issues when CephFS is re-exported via
  NFS or CIFS and a fix for the bulk of W=1 compilation warnings"

* tag 'ceph-for-5.9-rc3' of git://github.com/ceph/ceph-client:
  ceph: don't allow setlease on cephfs
  ceph: fix inode number handling on arches with 32-bit ino_t
  libceph: add __maybe_unused to DEFINE_CEPH_FEATURE

4 years agocifs: fix check of tcon dfs in smb1
Paulo Alcantara [Thu, 27 Aug 2020 14:20:19 +0000 (11:20 -0300)]
cifs: fix check of tcon dfs in smb1

For SMB1, the DFS flag should be checked against tcon->Flags rather
than tcon->share_flags.  While at it, add an is_tcon_dfs() helper to
check for DFS capability in a more generic way.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
4 years agoMerge tag 'mfd-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Linus Torvalds [Fri, 28 Aug 2020 17:15:33 +0000 (10:15 -0700)]
Merge tag 'mfd-fixes-5.9' of git://git./linux/kernel/git/lee/mfd

Pull MFD fixes from Lee Jones:

 - fix double free

 - handle devicetree disabled devices gracefully

* tag 'mfd-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: mfd-core: Ensure disabled devices are ignored without error
  mfd: core: Fix double-free in mfd_remove_devices_fn()

4 years agoMerge tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 28 Aug 2020 16:46:48 +0000 (09:46 -0700)]
Merge tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "As expected a bit of an rc3 uptick, amdgpu and msm are the main ones,
  one msm patch was from the merge window, but had dependencies and we
  dropped it until the other tree had landed. Otherwise it's a couple of
  fixes for core, and etnaviv, and single i915, exynos, omap fixes.

  I'm still tracking the Sandybridge gpu relocations issue, if we don't
  see much movement I might just queue up the reverts. I'll talk to
  Daniel next week once he's back from holidays.

  core:
   - Take modeset bkl for legacy drivers

  dp_mst:
   - Allow null crtc in dp_mst

  i915:
   - Fix command parser desc matching with masks

  amdgpu:
   - Misc display fixes
   - Backlight fixes
   - MPO fix for DCN1
   - Fixes for Sienna Cichlid
   - Fixes for Navy Flounder
   - Vega SW CTF fixes
   - SMU fix for Raven
   - Fix a possible overflow in INFO ioctl
   - Gfx10 clockgating fix

  msm:
   - opp/bw scaling patch followup
   - frequency restoring fux
   - vblank in atomic commit fix
   - dpu modesetting fixes
   - fencing fix

  etnaviv:
   - scheduler interaction fix
   - gpu init regression fix

  exynos:
   - Just drop __iommu annotation to fix sparse warning

  omap:
   - locking state fix"

* tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm: (41 commits)
  drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init
  drm/amdgpu: disable runtime pm for navy_flounder
  drm/amd/display: Retry AUX write when fail occurs
  drm/amdgpu: Fix buffer overflow in INFO ioctl
  drm/amd/powerplay: Fix hardmins not being sent to SMU for RV
  drm/amdgpu: use MODE1 reset for navy_flounder by default
  drm/amd/pm: correct the thermal alert temperature limit settings
  drm/amdgpu: add asd fw check before loading asd
  drm/amd/display: Keep current gain when ABM disable immediately
  drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation
  drm/amd/display: Revert HDCP disable sequence change
  drm/amd/display: Send DISPLAY_OFF after power down on boot
  drm/amdgpu/gfx10: refine mgcg setting
  drm/amd/pm: correct Vega20 swctf limit setting
  drm/amd/pm: correct Vega12 swctf limit setting
  drm/amd/pm: correct Vega10 swctf limit setting
  drm/amd/pm: set VCN pg per instances
  drm/amd/pm: enable run_btc callback for sienna_cichlid
  drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps
  drm/amd/display: Reject overlay plane configurations in multi-display scenarios
  ...

4 years agoKVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception
James Morse [Fri, 21 Aug 2020 14:07:07 +0000 (15:07 +0100)]
KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception

AT instructions do a translation table walk and return the result, or
the fault in PAR_EL1. KVM uses these to find the IPA when the value is
not provided by the CPU in HPFAR_EL1.

If a translation table walk causes an external abort it is taken as an
exception, even if it was due to an AT instruction. (DDI0487F.a's D5.2.11
"Synchronous faults generated by address translation instructions")

While we previously made KVM resilient to exceptions taken due to AT
instructions, the device access causes mismatched attributes, and may
occur speculatively. Prevent this, by forbidding a walk through memory
described as device at stage2. Now such AT instructions will report a
stage2 fault.

Such a fault will cause KVM to restart the guest. If the AT instructions
always walk the page tables, but guest execution uses the translation cached
in the TLB, the guest can't make forward progress until the TLB entry is
evicted. This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64:
Defer guest entry when an asynchronous exception is pending"), KVM will
return to the host to process IRQs allowing the rest of the system to keep
running.

Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending")
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
4 years agoKVM: arm64: Survive synchronous exceptions caused by AT instructions
James Morse [Fri, 21 Aug 2020 14:07:06 +0000 (15:07 +0100)]
KVM: arm64: Survive synchronous exceptions caused by AT instructions

KVM doesn't expect any synchronous exceptions when executing, any such
exception leads to a panic(). AT instructions access the guest page
tables, and can cause a synchronous external abort to be taken.

The arm-arm is unclear on what should happen if the guest has configured
the hardware update of the access-flag, and a memory type in TCR_EL1 that
does not support atomic operations. B2.2.6 "Possible implementation
restrictions on using atomic instructions" from DDI0487F.a lists
synchronous external abort as a possible behaviour of atomic instructions
that target memory that isn't writeback cacheable, but the page table
walker may behave differently.

Make KVM robust to synchronous exceptions caused by AT instructions.
Add a get_user() style helper for AT instructions that returns -EFAULT
if an exception was generated.

While KVM's version of the exception table mixes synchronous and
asynchronous exceptions, only one of these can occur at each location.

Re-enter the guest when the AT instructions take an exception on the
assumption the guest will take the same exception. This isn't guaranteed
to make forward progress, as the AT instructions may always walk the page
tables, but guest execution may use the translation cached in the TLB.

This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64: Defer guest
entry when an asynchronous exception is pending"), KVM will return to the
host to process IRQs allowing the rest of the system to keep running.

Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending")
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
4 years agoKVM: arm64: Add kvm_extable for vaxorcism code
James Morse [Fri, 21 Aug 2020 14:07:05 +0000 (15:07 +0100)]
KVM: arm64: Add kvm_extable for vaxorcism code

KVM has a one instruction window where it will allow an SError exception
to be consumed by the hypervisor without treating it as a hypervisor bug.
This is used to consume asynchronous external abort that were caused by
the guest.

As we are about to add another location that survives unexpected exceptions,
generalise this code to make it behave like the host's extable.

KVM's version has to be mapped to EL2 to be accessible on nVHE systems.

The SError vaxorcism code is a one instruction window, so has two entries
in the extable. Because the KVM code is copied for VHE and nVHE, we end up
with four entries, half of which correspond with code that isn't mapped.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
4 years agoMerge branch 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md...
Jens Axboe [Fri, 28 Aug 2020 13:52:02 +0000 (07:52 -0600)]
Merge branch 'md-fixes' of https://git./linux/kernel/git/song/md into block-5.9

Pull MD fix from Song.

* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid5: make sure stripe_size as power of two

4 years agoarm64: vdso32: make vdso32 install conditional
Frank van der Linden [Thu, 27 Aug 2020 23:40:12 +0000 (23:40 +0000)]
arm64: vdso32: make vdso32 install conditional

vdso32 should only be installed if CONFIG_COMPAT_VDSO is enabled,
since it's not even supposed to be compiled otherwise, and arm64
builds without a 32bit crosscompiler will fail.

Fixes: 8d75785a8142 ("ARM64: vdso32: Install vdso32 from vdso_install")
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Cc: stable@vger.kernel.org [5.4+]
Link: https://lore.kernel.org/r/20200827234012.19757-1-fllinden@amazon.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
4 years agoarm64: use a common .arch preamble for inline assembly
Sami Tolvanen [Thu, 27 Aug 2020 20:36:08 +0000 (13:36 -0700)]
arm64: use a common .arch preamble for inline assembly

Commit 7c78f67e9bd9 ("arm64: enable tlbi range instructions") breaks
LLVM's integrated assembler, because -Wa,-march is only passed to
external assemblers and therefore, the new instructions are not enabled
when IAS is used.

This change adds a common architecture version preamble, which can be
used in inline assembly blocks that contain instructions that require
a newer architecture version, and uses it to fix __TLBI_0 and __TLBI_1
with ARM64_TLB_RANGE.

Fixes: 7c78f67e9bd9 ("arm64: enable tlbi range instructions")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1106
Link: https://lore.kernel.org/r/20200827203608.1225689-1-samitolvanen@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
4 years agomfd: mfd-core: Ensure disabled devices are ignored without error
Lee Jones [Wed, 19 Aug 2020 08:16:50 +0000 (09:16 +0100)]
mfd: mfd-core: Ensure disabled devices are ignored without error

Commit e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match
devices with the correct of_nodes") changed the semantics for disabled
devices in mfd_add_device().  Instead of silently ignoring a disabled
child device, an error was returned.  On receipt of the error
mfd_add_devices() the precedes to remove *all* child devices and
returns an all-failed error to the caller, which will inevitably fail
the parent device as well.

This patch reverts back to the old semantics and ignores child devices
which are disabled in Device Tree.

Fixes: e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes")
Reported-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
4 years agousb: storage: Add unusual_uas entry for Sony PSZ drives
Alan Stern [Wed, 26 Aug 2020 14:32:29 +0000 (10:32 -0400)]
usb: storage: Add unusual_uas entry for Sony PSZ drives

The PSZ-HA* family of USB disk drives from Sony can't handle the
REPORT OPCODES command when using the UAS protocol.  This patch adds
an appropriate quirks entry.

Reported-and-tested-by: Till Dörges <doerges@pre-sense.de>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agomd/raid5: make sure stripe_size as power of two
Yufen Yu [Thu, 20 Aug 2020 13:22:05 +0000 (09:22 -0400)]
md/raid5: make sure stripe_size as power of two

Commit 3b5408b98e4d ("md/raid5: support config stripe_size by sysfs
entry") make stripe_size as a configurable value. It just requires
stripe_size as multiple of 4KB.

In fact, we should make sure stripe_size as power of two. Otherwise,
stripe_shift which is the result of ilog2 can not represent the real
stripe_size. Then, stripe_hash() and stripe_hash_locks_hash() may
get unexpected value.

Fixes: 3b5408b98e4d ("md/raid5: support config stripe_size by sysfs entry")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
4 years agopowerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
Christophe Leroy [Thu, 27 Aug 2020 18:30:27 +0000 (18:30 +0000)]
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU

low_sleep_handler() can't restore the context from virtual
stack because the stack can hardly be accessed with MMU OFF.

For now, disable VMAP stack when CONFIG_ADB_PMU is selected.

Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: Giuseppe Sacco <giuseppe@sguazz.it>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ec96c15bfa1a7415ab604ee1c98cd45779c08be0.1598553015.git.christophe.leroy@csgroup.eu
4 years agoMerge tag 'drm-intel-fixes-2020-08-27' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Fri, 28 Aug 2020 01:02:52 +0000 (11:02 +1000)]
Merge tag 'drm-intel-fixes-2020-08-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.9-rc3:
- Fix command parser desc matching with masks

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87imd45ufw.fsf@intel.com
4 years agoMerge tag 'drm-misc-fixes-2020-08-26' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Fri, 28 Aug 2020 00:52:28 +0000 (10:52 +1000)]
Merge tag 'drm-misc-fixes-2020-08-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Fixes for v5.9-rc2:
- Take modeset bkl for legacy drivers.
- Allow null crtc in dp_mst.
- Omap locking state fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7af1e52a-27de-8edc-d0b2-e23b01e8bc96@linux.intel.com
4 years agoio_uring: don't bounce block based -EAGAIN retry off task_work
Jens Axboe [Thu, 27 Aug 2020 22:46:24 +0000 (16:46 -0600)]
io_uring: don't bounce block based -EAGAIN retry off task_work

These events happen inline from submission, so there's no need to
bounce them through the original task. Just set them up for retry
and issue retry directly instead of going over task_work.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoio_uring: fix IOPOLL -EAGAIN retries
Jens Axboe [Thu, 27 Aug 2020 22:40:19 +0000 (16:40 -0600)]
io_uring: fix IOPOLL -EAGAIN retries

This normally isn't hit, as polling is mostly done on NVMe with deep
queue depths. But if we do run into request starvation, we need to
ensure that retries are properly serialized.

Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoarm64/cpuinfo: Remove unnecessary fallthrough annotation
Gustavo A. R. Silva [Thu, 27 Aug 2020 20:44:32 +0000 (15:44 -0500)]
arm64/cpuinfo: Remove unnecessary fallthrough annotation

Fallthrough annotations for consecutive default and case labels
are not necessary.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
4 years agomedia: dib0700: Fix identation issue in dib8096_set_param_override()
Gustavo A. R. Silva [Thu, 27 Aug 2020 20:36:28 +0000 (15:36 -0500)]
media: dib0700: Fix identation issue in dib8096_set_param_override()

Fix identation issues.

Fixes: 5e9c85d98337 ("[media] dib8096: enhancement")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
4 years agohwmon: (gsc-hwmon) Scale temperature to millidegrees
Tim Harvey [Thu, 27 Aug 2020 17:20:24 +0000 (10:20 -0700)]
hwmon: (gsc-hwmon) Scale temperature to millidegrees

The GSC registers report temperature in decidegrees celcius so we
need to scale it to represent the hwmon sysfs API of millidegrees.

Cc: stable@vger.kernel.org
Fixes: 3bce5377ef66 ("hwmon: Add Gateworks System Controller support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://lore.kernel.org/r/1598548824-16898-1-git-send-email-tharvey@gateworks.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
4 years agoafs: Remove erroneous fallthough annotation
Dan Carpenter [Wed, 26 Aug 2020 11:32:14 +0000 (14:32 +0300)]
afs: Remove erroneous fallthough annotation

The fall through annotation comes after a return statement so it's not
reachable.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
4 years agoEDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()
Shiju Jose [Thu, 27 Aug 2020 14:04:50 +0000 (15:04 +0100)]
EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()

After

  b9cae27728d1 ("EDAC/ghes: Scan the system once on driver init")

and with CONFIG_DEBUG_TEST_DRIVER_REMOVE enabled, ghes_hw.dimms becomes
a NULL pointer after the second ->probe() (aka ghes_edac_register())
which the config option causes to be called.

This happens because the static variable which holds down whether
the system has been scanned already, doesn't get reset in
ghes_edac_unregister(). Then, on the second probe, ghes_scan_system()
doesn't get to enumerate the DIMMs, leading to ghes_hw.dimms remaining
NULL.

Clear the variable and rename it to something more descriptive so that a
second probe succeeds.

 [ bp: Rewrite commit message. ]

Fixes: b9cae27728d1 ("EDAC/ghes: Scan the system once on driver init")
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200827140450.1620-1-shiju.jose@huawei.com
4 years agocrypto: af_alg - Work around empty control messages without MSG_MORE
Herbert Xu [Thu, 27 Aug 2020 07:14:36 +0000 (17:14 +1000)]
crypto: af_alg - Work around empty control messages without MSG_MORE

The iwd daemon uses libell which sets up the skcipher operation with
two separate control messages.  As the first control message is sent
without MSG_MORE, it is interpreted as an empty request.

While libell should be fixed to use MSG_MORE where appropriate, this
patch works around the bug in the kernel so that existing binaries
continue to work.

We will print a warning however.

A separate issue is that the new kernel code no longer allows the
control message to be sent twice within the same request.  This
restriction is obviously incompatible with what iwd was doing (first
setting an IV and then sending the real control message).  This
patch changes the kernel so that this is explicitly allowed.

Reported-by: Caleb Jorden <caljorden@hotmail.com>
Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
4 years agocpufreq: Use WARN_ON_ONCE() for invalid relation
Viresh Kumar [Thu, 27 Aug 2020 05:24:16 +0000 (10:54 +0530)]
cpufreq: Use WARN_ON_ONCE() for invalid relation

The relation can't be invalid here, so if it turns out to be invalid,
just WARN_ON_ONCE() and return 0.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
4 years agocpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
Viresh Kumar [Thu, 27 Aug 2020 05:24:15 +0000 (10:54 +0530)]
cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()

"cpufreq_driver" is guaranteed to be valid here, no need to check it
here.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
4 years agoRevert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
Pratik Rajesh Sampat [Wed, 26 Aug 2020 08:29:18 +0000 (13:59 +0530)]
Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"

cpuidle stop state implementation has minor optimizations for P10
where hardware preserves more SPR registers compared to P9. The
current P9 driver works for P10, although does few extra
save-restores. P9 driver can provide the required power management
features like SMT thread folding and core level power savings on a P10
platform.

Until the P10 stop driver is available, revert the commit which allows
for only P9 systems to utilize cpuidle and blocks all idle stop states
for P10. CPU idle states are enabled and tested on the P10 platform
with this fix.

This reverts commit 8747bf36f312356f8a295a0c39ff092d65ce75ae.

Fixes: 8747bf36f312 ("powerpc/powernv/idle: Replace CPU feature check with PVR check")
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200826082918.89306-1-psampat@linux.ibm.com
4 years agopowerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
Athira Rajeev [Wed, 26 Aug 2020 06:40:29 +0000 (02:40 -0400)]
powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc

IMC trace-mode uses MSR[HV/PR] bits to set the cpumode for the
instruction pointer captured in each sample. The bits are fetched from
the third double word of the trace record. Reading third double word
from IMC trace record should use be64_to_cpu() along with READ_ONCE
inorder to fetch correct MSR[HV/PR] bits. Patch addresses this change.

Currently we are using PERF_RECORD_MISC_HYPERVISOR as cpumode if MSR
HV is 1 and PR is 0 which means the address is from host counter. But
using PERF_RECORD_MISC_HYPERVISOR for host counter data will fail to
resolve the address -> symbol during "perf report" because perf tools
side uses PERF_RECORD_MISC_KERNEL to represent the host counter data.
Therefore, fix the trace imc sample data to use
PERF_RECORD_MISC_KERNEL as cpumode for host kernel information.

Fixes: 77ca3951cc37 ("powerpc/perf: Add kernel support for new MSR[HV PR] bits in trace-imc")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1598424029-1662-1-git-send-email-atrajeev@linux.vnet.ibm.com
4 years agopowerpc/perf: Fix crashes with generic_compat_pmu & BHRB
Alexey Kardashevskiy [Tue, 2 Jun 2020 02:56:12 +0000 (12:56 +1000)]
powerpc/perf: Fix crashes with generic_compat_pmu & BHRB

The bhrb_filter_map ("The Branch History Rolling Buffer") callback is
only defined in raw CPUs' power_pmu structs. The "architected" CPUs
use generic_compat_pmu, which does not have this callback, and crashes
occur if a user tries to enable branch stack for an event.

This add a NULL pointer check for bhrb_filter_map() which behaves as
if the callback returned an error.

This does not add the same check for config_bhrb() as the only caller
checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0.

Fixes: be80e758d0c2 ("powerpc/perf: Add generic compat mode pmu driver")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602025612.62707-1-aik@ozlabs.ru
4 years agopowerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
Michael Ellerman [Tue, 25 Aug 2020 09:34:24 +0000 (19:34 +1000)]
powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode

The recent commit 01eb01877f33 ("powerpc/64s: Fix restore_math
unnecessarily changing MSR") changed some of the handling of floating
point/vector restore.

In particular it caused current->thread.fpexc_mode to be copied into
the current MSR (via msr_check_and_set()), rather than just into
regs->msr (which is moved into MSR on return to userspace).

This can lead to a crash in the kernel if we take a floating point
exception when restoring FPSCR:

  Oops: Exception in kernel mode, sig: 8 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
  Modules linked in:
  CPU: 3 PID: 101213 Comm: ld64.so.2 Not tainted 5.9.0-rc1-00098-g18445bf405cb-dirty #9
  NIP:  c00000000000fbb4 LR: c00000000001a7ac CTR: c000000000183570
  REGS: c0000016b7cfb3b0 TRAP: 0700   Not tainted  (5.9.0-rc1-00098-g18445bf405cb-dirty)
  MSR:  900000000290b933 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 44002444  XER: 00000000
  CFAR: c00000000001a7a8 IRQMASK: 1
  GPR00: c00000000001ae40 c0000016b7cfb640 c0000000011b7f00 c000001542a0f740
  GPR04: c000001542a0f720 c000001542a0eb00 0000000000000900 c000001542a0eb00
  GPR08: 000000000000000a 0000000000002000 9000000000009033 0000000000000000
  GPR12: 0000000000004000 c0000017ffffd900 0000000000000001 c000000000df5a58
  GPR16: c000000000e19c18 c0000000010e1123 0000000000000001 c000000000e1a638
  GPR20: 0000000000000000 c0000000044b1d00 0000000000000000 c000001542a0f2a0
  GPR24: 00000016c7fe0000 c000001542a0f720 c000000001c93da0 c000000000fe5f28
  GPR28: c000001542a0f720 0000000000800000 c0000016b7cfbe90 0000000002802900
  NIP load_fp_state+0x4/0x214
  LR  restore_math+0x17c/0x1f0
  Call Trace:
    0xc0000016b7cfb680 (unreliable)
    __switch_to+0x330/0x460
    __schedule+0x318/0x920
    schedule+0x74/0x140
    schedule_timeout+0x318/0x3f0
    wait_for_completion+0xc8/0x210
    call_usermodehelper_exec+0x234/0x280
    do_coredump+0xedc/0x13c0
    get_signal+0x1d4/0xbe0
    do_notify_resume+0x1a0/0x490
    interrupt_exit_user_prepare+0x1c4/0x230
    interrupt_return+0x14/0x1c0
  Instruction dump:
  ebe10168 e88101a0 7c8ff120 382101e0 e8010010 7c0803a6 4e800020 790605c4
  782905c4 7c0008a8 7c0008a8 c8030200 <fffe058e48000088 c8030000 c8230010

Fix it by only loading the fpexc_mode value into regs->msr.

Also add a comment to explain that although VSX is subject to the
value of fpexc_mode, we don't have to handle that separately because
we only allow VSX to be enabled if FP is also enabled.

Fixes: 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR")
Reported-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20200825093424.3967813-1-mpe@ellerman.id.au
4 years agopowerpc/64s: scv entry should set PPR
Nicholas Piggin [Tue, 25 Aug 2020 07:53:09 +0000 (17:53 +1000)]
powerpc/64s: scv entry should set PPR

Kernel entry sets PPR to HMT_MEDIUM by convention. The scv entry
path missed this.

Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200825075309.224184-1-npiggin@gmail.com
4 years agoDocumentation/powerpc: fix malformed table in syscall64-abi
Randy Dunlap [Mon, 24 Aug 2020 00:31:16 +0000 (17:31 -0700)]
Documentation/powerpc: fix malformed table in syscall64-abi

Fix malformed table warning in powerpc/syscall64-abi.rst by making
two tables and moving the headings.

Documentation/powerpc/syscall64-abi.rst:53: WARNING: Malformed table.
Text in column margin in table line 2.

  =========== ============= ========================================
  --- For the sc instruction, differences with the ELF ABI ---
  r0          Volatile      (System call number.)
  r3          Volatile      (Parameter 1, and return value.)
  r4-r8       Volatile      (Parameters 2-6.)
  cr0         Volatile      (cr0.SO is the return error condition.)
  cr1, cr5-7  Nonvolatile
  lr          Nonvolatile

  --- For the scv 0 instruction, differences with the ELF ABI ---
  r0          Volatile      (System call number.)
  r3          Volatile      (Parameter 1, and return value.)
  r4-r8       Volatile      (Parameters 2-6.)
  =========== ============= ========================================

Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e06de4d3-a36f-2745-9775-467e125436cc@infradead.org
4 years agovideo: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
Michael Ellerman [Fri, 21 Aug 2020 10:49:10 +0000 (20:49 +1000)]
video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n

The build is currently broken, if COMPILE_TEST=y and PPC_PMAC=n:

  linux/drivers/video/fbdev/controlfb.c: In function â€˜control_set_hardware’:
  linux/drivers/video/fbdev/controlfb.c:276:2: error: implicit declaration of function â€˜btext_update_display’
    276 |  btext_update_display(p->frame_buffer_phys + CTRLFB_OFF,
        |  ^~~~~~~~~~~~~~~~~~~~

Fix it by including btext.h whenever CONFIG_BOOTX_TEXT is enabled.

Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://lore.kernel.org/r/20200821104910.3363818-1-mpe@ellerman.id.au
4 years agox86/irq: Unbreak interrupt affinity setting
Thomas Gleixner [Wed, 26 Aug 2020 20:21:44 +0000 (22:21 +0200)]
x86/irq: Unbreak interrupt affinity setting

Several people reported that 5.8 broke the interrupt affinity setting
mechanism.

The consolidation of the entry code reused the regular exception entry code
for device interrupts and changed the way how the vector number is conveyed
from ptregs->orig_ax to a function argument.

The low level entry uses the hardware error code slot to push the vector
number onto the stack which is retrieved from there into a function
argument and the slot on stack is set to -1.

The reason for setting it to -1 is that the error code slot is at the
position where pt_regs::orig_ax is. A positive value in pt_regs::orig_ax
indicates that the entry came via a syscall. If it's not set to a negative
value then a signal delivery on return to userspace would try to restart a
syscall. But there are other places which rely on pt_regs::orig_ax being a
valid indicator for syscall entry.

But setting pt_regs::orig_ax to -1 has a nasty side effect vs. the
interrupt affinity setting mechanism, which was overlooked when this change
was made.

Moving interrupts on x86 happens in several steps. A new vector on a
different CPU is allocated and the relevant interrupt source is
reprogrammed to that. But that's racy and there might be an interrupt
already in flight to the old vector. So the old vector is preserved until
the first interrupt arrives on the new vector and the new target CPU. Once
that happens the old vector is cleaned up, but this cleanup still depends
on the vector number being stored in pt_regs::orig_ax, which is now -1.

That -1 makes the check for cleanup: pt_regs::orig_ax == new_vector
always false. As a consequence the interrupt is moved once, but then it
cannot be moved anymore because the cleanup of the old vector never
happens.

There would be several ways to convey the vector information to that place
in the guts of the interrupt handling, but on deeper inspection it turned
out that this check is pointless and a leftover from the old affinity model
of X86 which supported multi-CPU affinities. Under this model it was
possible that an interrupt had an old and a new vector on the same CPU, so
the vector match was required.

Under the new model the effective affinity of an interrupt is always a
single CPU from the requested affinity mask. If the affinity mask changes
then either the interrupt stays on the CPU and on the same vector when that
CPU is still in the new affinity mask or it is moved to a different CPU, but
it is never moved to a different vector on the same CPU.

Ergo the cleanup check for the matching vector number is not required and
can be removed which makes the dependency on pt_regs:orig_ax go away.

The remaining check for new_cpu == smp_processsor_id() is completely
sufficient. If it matches then the interrupt was successfully migrated and
the cleanup can proceed.

For paranoia sake add a warning into the vector assignment code to
validate that the assumption of never moving to a different vector on
the same CPU holds.

Fixes: 633260fa143 ("x86/irq: Convey vector as argument and not in ptregs")
Reported-by: Alex bykov <alex.bykov@scylladb.com>
Reported-by: Avi Kivity <avi@scylladb.com>
Reported-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexander Graf <graf@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87wo1ltaxz.fsf@nanos.tec.linutronix.de
4 years agox86/hotplug: Silence APIC only after all interrupts are migrated
Ashok Raj [Thu, 27 Aug 2020 04:12:10 +0000 (21:12 -0700)]
x86/hotplug: Silence APIC only after all interrupts are migrated

There is a race when taking a CPU offline. Current code looks like this:

native_cpu_disable()
{
...
apic_soft_disable();
/*
 * Any existing set bits for pending interrupt to
 * this CPU are preserved and will be sent via IPI
 * to another CPU by fixup_irqs().
 */
cpu_disable_common();
{
....
/*
 * Race window happens here. Once local APIC has been
 * disabled any new interrupts from the device to
 * the old CPU are lost
 */
fixup_irqs(); // Too late to capture anything in IRR.
...
}
}

The fix is to disable the APIC *after* cpu_disable_common().

Testing was done with a USB NIC that provided a source of frequent
interrupts. A script migrated interrupts to a specific CPU and
then took that CPU offline.

Fixes: 60dcaad5736f ("x86/hotplug: Silence APIC and NMI when CPU is dead")
Reported-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/875zdarr4h.fsf@nanos.tec.linutronix.de/
Link: https://lore.kernel.org/r/1598501530-45821-1-git-send-email-ashok.raj@intel.com
4 years agoUSB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge
Cyril Roelandt [Tue, 25 Aug 2020 21:22:31 +0000 (23:22 +0200)]
USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge

This device does not support UAS properly and a similar entry already
exists in drivers/usb/storage/unusual_uas.h. Without this patch,
storage_probe() defers the handling of this device to UAS, which cannot
handle it either.

Tested-by: Brice Goglin <brice.goglin@gmail.com>
Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agousb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()
Tang Bin [Wed, 26 Aug 2020 14:49:31 +0000 (22:49 +0800)]
usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()

If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
exynos_ohci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.

Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoUSB: gadget: u_f: Unbreak offset calculation in VLAs
Andy Shevchenko [Wed, 26 Aug 2020 19:21:19 +0000 (22:21 +0300)]
USB: gadget: u_f: Unbreak offset calculation in VLAs

Inadvertently the commit b1cd1b65afba ("USB: gadget: u_f: add overflow checks
to VLA macros") makes VLA macros to always return 0 due to different scope of
two variables of the same name. Obviously we need to have only one.

Fixes: b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoUSB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D
Alan Stern [Wed, 26 Aug 2020 19:46:24 +0000 (15:46 -0400)]
USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D

The Sound Devices MixPre-D audio card suffers from the same defect
as the Sound Devices USBPre2: an endpoint shared between a normal
audio interface and a vendor-specific interface, in violation of the
USB spec.  Since the USB core now treats duplicated endpoints as bugs
and ignores them, the audio endpoint isn't available and the card
can't be used for audio capture.

Along the same lines as commit bdd1b147b802 ("USB: quirks: blacklist
duplicate ep on Sound Devices USBPre2"), this patch adds a quirks
entry saying to ignore ep5in for interface 1, leaving it available for
use with standard audio interface 2.

Reported-and-tested-by: Jean-Christophe Barnoud <jcbarnoud@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints")
Link: https://lore.kernel.org/r/20200826194624.GA412633@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agodma-pool: Fix an uninitialized variable bug in atomic_pool_expand()
Dan Carpenter [Wed, 26 Aug 2020 11:33:30 +0000 (14:33 +0300)]
dma-pool: Fix an uninitialized variable bug in atomic_pool_expand()

The "page" pointer can be used with out being initialized.

Fixes: d7e673ec2c8e ("dma-pool: Only allocate from CMA when in same memory zone")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
4 years agoarm/xen: Add misuse warning to virt_to_gfn
Simon Leiner [Tue, 25 Aug 2020 09:31:53 +0000 (11:31 +0200)]
arm/xen: Add misuse warning to virt_to_gfn

As virt_to_gfn uses virt_to_phys, it will return invalid addresses when
used with vmalloc'd addresses. This patch introduces a warning, when
virt_to_gfn is used in this way.

Signed-off-by: Simon Leiner <simon@leiner.me>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20200825093153.35500-2-simon@leiner.me
Signed-off-by: Juergen Gross <jgross@suse.com>
4 years agoxen/xenbus: Fix granting of vmalloc'd memory
Simon Leiner [Tue, 25 Aug 2020 09:31:52 +0000 (11:31 +0200)]
xen/xenbus: Fix granting of vmalloc'd memory

On some architectures (like ARM), virt_to_gfn cannot be used for
vmalloc'd memory because of its reliance on virt_to_phys. This patch
introduces a check for vmalloc'd addresses and obtains the PFN using
vmalloc_to_pfn in that case.

Signed-off-by: Simon Leiner <simon@leiner.me>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.me
Signed-off-by: Juergen Gross <jgross@suse.com>
4 years agoXEN uses irqdesc::irq_data_common::handler_data to store a per interrupt
Thomas Gleixner [Tue, 25 Aug 2020 15:22:58 +0000 (17:22 +0200)]
XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt
XEN data pointer which contains XEN specific information.

handler data is meant for interrupt handlers and not for storing irq chip
specific information as some devices require handler data to store internal
per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers.

This obviously creates a conflict of interests and crashes the machine
because the XEN pointer is overwritten by the driver pointer.

As the XEN data is not handler specific it should be stored in
irqdesc::irq_data::chip_data instead.

A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that.

Cc: stable@vger.kernel.org
Reported-by: Roman Shaposhnik <roman@zededa.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de
Signed-off-by: Juergen Gross <jgross@suse.com>
4 years agoMerge tag 'amd-drm-fixes-5.9-2020-08-26' of git://people.freedesktop.org/~agd5f/linux...
Dave Airlie [Thu, 27 Aug 2020 02:44:04 +0000 (12:44 +1000)]
Merge tag 'amd-drm-fixes-5.9-2020-08-26' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.9-2020-08-26:

amdgpu:
- Misc display fixes
- Backlight fixes
- MPO fix for DCN1
- Fixes for Sienna Cichlid
- Fixes for Navy Flounder
- Vega SW CTF fixes
- SMU fix for Raven
- Fix a possible overflow in INFO ioctl
- Gfx10 clockgating fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826200801.17735-1-alexander.deucher@amd.com
4 years agoMerge tag 'drm-msm-fixes-2020-08-24' of https://gitlab.freedesktop.org/drm/msm into...
Dave Airlie [Thu, 27 Aug 2020 02:36:32 +0000 (12:36 +1000)]
Merge tag 'drm-msm-fixes-2020-08-24' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

Some fixes for v5.9 plus the one opp/bandwidth scaling patch ("drm:
msm: a6xx: use dev_pm_opp_set_bw to scale DDR") which was not included
in the initial pull due to dependency on patch landing thru OPP tree

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/
4 years agoMerge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm...
Dave Airlie [Thu, 27 Aug 2020 02:34:06 +0000 (12:34 +1000)]
Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes

Two fixes:
One fixes a bad interaction with the DRM scheduler, leading to some dma
fences not getting signalled after hitting the job timeout. The other
one fixes a GPU init regression, as apparently one old core doesn't
likes us reading some of the identification registers.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/aceebfe3af636346f5252bdf727cdd988bdcbdf2.camel@pengutronix.de
4 years agoMerge tag 'exynos-drm-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel...
Dave Airlie [Thu, 27 Aug 2020 02:22:22 +0000 (12:22 +1000)]
Merge tag 'exynos-drm-fixes-v5.9-rc3' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes

One fixup
- Just drop __iommu annotation to fix sparse warning.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <daeinki@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826071520.3140-1-daeinki@gmail.com
4 years agoio_uring: clear req->result on IOPOLL re-issue
Jens Axboe [Thu, 27 Aug 2020 00:58:26 +0000 (18:58 -0600)]
io_uring: clear req->result on IOPOLL re-issue

Make sure we clear req->result, which was set to -EAGAIN for retry
purposes, when moving it to the reissue list. Otherwise we can end up
retrying a request more than once, which leads to weird results in
the io-wq handling (and other spots).

Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agodrm/amd/display: Fix memleak in amdgpu_dm_mode_config_init
Dinghao Liu [Wed, 26 Aug 2020 13:24:58 +0000 (21:24 +0800)]
drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init

When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4 years agodrm/amdgpu: disable runtime pm for navy_flounder
Jiansong Chen [Wed, 26 Aug 2020 06:11:52 +0000 (14:11 +0800)]
drm/amdgpu: disable runtime pm for navy_flounder

Disable runtime pm for navy_flounder temporarily.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4 years agodrm/amd/display: Retry AUX write when fail occurs
Wayne Lin [Tue, 18 Aug 2020 03:19:42 +0000 (11:19 +0800)]
drm/amd/display: Retry AUX write when fail occurs

[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.

[How]
Check if AUX_WR success. If not, retry it.

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4 years agodrm/amdgpu: Fix buffer overflow in INFO ioctl
Alex Deucher [Tue, 25 Aug 2020 15:43:45 +0000 (11:43 -0400)]
drm/amdgpu: Fix buffer overflow in INFO ioctl

The values for "se_num" and "sh_num" come from the user in the ioctl.
They can be in the 0-255 range but if they're more than
AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in
an out of bounds read.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
4 years agodrm/amd/powerplay: Fix hardmins not being sent to SMU for RV
Nicholas Kazlauskas [Fri, 14 Aug 2020 15:49:13 +0000 (11:49 -0400)]
drm/amd/powerplay: Fix hardmins not being sent to SMU for RV

[Why]
DC uses these to raise the voltage as needed for higher dispclk/dppclk
and to ensure that we have enough bandwidth to drive the displays.

There's a bug preventing these from actuially sending messages since
it's checking the actual clock (which is 0) instead of the incoming
clock (which shouldn't be 0) when deciding to send the hardmin.

[How]
Check the clocks != 0 instead of the actual clocks.

Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
4 years agodrm/amdgpu: use MODE1 reset for navy_flounder by default
Jiansong Chen [Tue, 25 Aug 2020 07:39:57 +0000 (15:39 +0800)]
drm/amdgpu: use MODE1 reset for navy_flounder by default

Switch default gpu reset method to MODE1 for navy_flounder.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4 years agodrm/amd/pm: correct the thermal alert temperature limit settings
Evan Quan [Tue, 25 Aug 2020 02:35:11 +0000 (10:35 +0800)]
drm/amd/pm: correct the thermal alert temperature limit settings

Do the maths in celsius degree. This can fix the issues caused
by the changes below:

drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
4 years agodrm/amdgpu: add asd fw check before loading asd
Tao Zhou [Tue, 28 Jul 2020 04:44:59 +0000 (12:44 +0800)]
drm/amdgpu: add asd fw check before loading asd

asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4 years agodrm/amd/display: Keep current gain when ABM disable immediately
Brandon Syu [Wed, 10 Jun 2020 08:44:33 +0000 (16:44 +0800)]
drm/amd/display: Keep current gain when ABM disable immediately

[Why]
When system enters s3/s0i3, backlight PWM would set user level.

[How]
ABM disable function add keep current gain to avoid it.

Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4 years agodrm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation
Samson Tam [Thu, 13 Aug 2020 14:50:21 +0000 (10:50 -0400)]
drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation

[Why]
dongle_type is set during dongle connection but for passive dongles,
dongle_type is not set. If user starts with an active dongle and
then switches to a passive dongle, it will still report as an active
dongle. Trying to emulate the wrong connecter type results in display
not lighting up.

[How]
Set dpcd_caps.dongle_type for passive dongles in detect_dp().

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4 years agodrm/amd/display: Revert HDCP disable sequence change
Jaehyun Chung [Mon, 10 Aug 2020 20:02:47 +0000 (16:02 -0400)]
drm/amd/display: Revert HDCP disable sequence change

[Why]
Revert HDCP disable sequence change that blanks stream before
disabling HDCP. PSP and HW teams are currently investigating the
root cause of why HDCP cannot be disabled before stream blank,
which is expected to work without issues.

Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4 years agodrm/amd/display: Send DISPLAY_OFF after power down on boot
Sung Lee [Tue, 11 Aug 2020 21:23:20 +0000 (17:23 -0400)]
drm/amd/display: Send DISPLAY_OFF after power down on boot

[WHY]
update_clocks might not be called on headless adapters. This means
DISPLAY_OFF may not be sent in headless cases.

[HOW]
If hardware is powered down on boot because it is headless (mode set
does not happen on that adapter) also send DISPLAY_OFF notification.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4 years agodrm/amdgpu/gfx10: refine mgcg setting
Jiansong Chen [Mon, 24 Aug 2020 10:44:09 +0000 (18:44 +0800)]
drm/amdgpu/gfx10: refine mgcg setting

1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang.
2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org