Eric Biggers [Wed, 19 Feb 2020 18:30:46 +0000 (10:30 -0800)]
ext4: rename s_journal_flag_rwsem to s_writepages_rwsem
commit
bbd55937de8f2754adc5792b0f8e5ff7d9c0420e upstream.
In preparation for making s_journal_flag_rwsem synchronize
ext4_writepages() with changes to both the EXTENTS and JOURNAL_DATA
flags (rather than just JOURNAL_DATA as it does currently), rename it to
s_writepages_rwsem.
Link: https://lore.kernel.org/r/20200219183047.47417-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 21 Feb 2020 10:08:35 +0000 (11:08 +0100)]
ext4: fix mount failure with quota configured as module
commit
9db176bceb5c5df4990486709da386edadc6bd1d upstream.
When CONFIG_QFMT_V2 is configured as a module, the test in
ext4_feature_set_ok() fails and so mount of filesystems with quota or
project features fails. Fix the test to use IS_ENABLED macro which
works properly even for modules.
Link: https://lore.kernel.org/r/20200221100835.9332-1-jack@suse.cz
Fixes:
d65d87a07476 ("ext4: improve explanation of a mount failure caused by a misconfigured kernel")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suraj Jitindar Singh [Wed, 19 Feb 2020 03:08:51 +0000 (19:08 -0800)]
ext4: fix potential race between s_flex_groups online resizing and access
commit
7c990728b99ed6fbe9c75fc202fce1172d9916da upstream.
During an online resize an array of s_flex_groups structures gets replaced
so it can get enlarged. If there is a concurrent access to the array and
this memory has been reused then this can lead to an invalid memory access.
The s_flex_group array has been converted into an array of pointers rather
than an array of structures. This is to ensure that the information
contained in the structures cannot get out of sync during a resize due to
an accessor updating the value in the old structure after it has been
copied but before the array pointer is updated. Since the structures them-
selves are no longer copied but only the pointers to them this case is
mitigated.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.edu
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suraj Jitindar Singh [Wed, 19 Feb 2020 03:08:50 +0000 (19:08 -0800)]
ext4: fix potential race between s_group_info online resizing and access
commit
df3da4ea5a0fc5d115c90d5aa6caa4dd433750a7 upstream.
During an online resize an array of pointers to s_group_info gets replaced
so it can get enlarged. If there is a concurrent access to the array in
ext4_get_group_info() and this memory has been reused then this can lead to
an invalid memory access.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-3-tytso@mit.edu
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Balbir Singh <sblbir@amazon.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Sat, 15 Feb 2020 21:40:37 +0000 (16:40 -0500)]
ext4: fix potential race between online resizing and write operations
commit
1d0c3924a92e69bfa91163bda83c12a994b4d106 upstream.
During an online resize an array of pointers to buffer heads gets
replaced so it can get enlarged. If there is a racing block
allocation or deallocation which uses the old array, and the old array
has gotten reused this can lead to a GPF or some other random kernel
memory getting modified.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-2-tytso@mit.edu
Reported-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shijie Luo [Sat, 15 Feb 2020 08:02:06 +0000 (03:02 -0500)]
ext4: add cond_resched() to __ext4_find_entry()
commit
9424ef56e13a1f14c57ea161eed3ecfdc7b2770e upstream.
We tested a soft lockup problem in linux 4.19 which could also
be found in linux 5.x.
When dir inode takes up a large number of blocks, and if the
directory is growing when we are searching, it's possible the
restart branch could be called many times, and the do while loop
could hold cpu a long time.
Here is the call trace in linux 4.19.
[ 473.756186] Call trace:
[ 473.756196] dump_backtrace+0x0/0x198
[ 473.756199] show_stack+0x24/0x30
[ 473.756205] dump_stack+0xa4/0xcc
[ 473.756210] watchdog_timer_fn+0x300/0x3e8
[ 473.756215] __hrtimer_run_queues+0x114/0x358
[ 473.756217] hrtimer_interrupt+0x104/0x2d8
[ 473.756222] arch_timer_handler_virt+0x38/0x58
[ 473.756226] handle_percpu_devid_irq+0x90/0x248
[ 473.756231] generic_handle_irq+0x34/0x50
[ 473.756234] __handle_domain_irq+0x68/0xc0
[ 473.756236] gic_handle_irq+0x6c/0x150
[ 473.756238] el1_irq+0xb8/0x140
[ 473.756286] ext4_es_lookup_extent+0xdc/0x258 [ext4]
[ 473.756310] ext4_map_blocks+0x64/0x5c0 [ext4]
[ 473.756333] ext4_getblk+0x6c/0x1d0 [ext4]
[ 473.756356] ext4_bread_batch+0x7c/0x1f8 [ext4]
[ 473.756379] ext4_find_entry+0x124/0x3f8 [ext4]
[ 473.756402] ext4_lookup+0x8c/0x258 [ext4]
[ 473.756407] __lookup_hash+0x8c/0xe8
[ 473.756411] filename_create+0xa0/0x170
[ 473.756413] do_mkdirat+0x6c/0x140
[ 473.756415] __arm64_sys_mkdirat+0x28/0x38
[ 473.756419] el0_svc_common+0x78/0x130
[ 473.756421] el0_svc_handler+0x38/0x78
[ 473.756423] el0_svc+0x8/0xc
[ 485.755156] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [tmp:5149]
Add cond_resched() to avoid soft lockup and to provide a better
system responding.
Link: https://lore.kernel.org/r/20200215080206.13293-1-luoshijie1@huawei.com
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qian Cai [Fri, 7 Feb 2020 14:29:11 +0000 (09:29 -0500)]
ext4: fix a data race in EXT4_I(inode)->i_disksize
commit
35df4299a6487f323b0aca120ea3f485dfee2ae3 upstream.
EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by
KCSAN,
BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4]
write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127:
ext4_write_end+0x4e3/0x750 [ext4]
ext4_update_i_disksize at fs/ext4/ext4.h:3032
(inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046
(inlined by) ext4_write_end at fs/ext4/inode.c:1287
generic_perform_write+0x208/0x2a0
ext4_buffered_write_iter+0x11f/0x210 [ext4]
ext4_file_write_iter+0xce/0x9e0 [ext4]
new_sync_write+0x29c/0x3b0
__vfs_write+0x92/0xa0
vfs_write+0x103/0x260
ksys_write+0x9d/0x130
__x64_sys_write+0x4c/0x60
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37:
ext4_writepages+0x10ac/0x1d00 [ext4]
mpage_map_and_submit_extent at fs/ext4/inode.c:2468
(inlined by) ext4_writepages at fs/ext4/inode.c:2772
do_writepages+0x5e/0x130
__writeback_single_inode+0xeb/0xb20
writeback_sb_inodes+0x429/0x900
__writeback_inodes_wb+0xc4/0x150
wb_writeback+0x4bd/0x870
wb_workfn+0x6b4/0x960
process_one_work+0x54c/0xbe0
worker_thread+0x80/0x650
kthread+0x1e0/0x200
ret_from_fork+0x27/0x50
Reported by Kernel Concurrency Sanitizer on:
CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G W O L 5.5.0-next-
20200204+ #5
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
Workqueue: writeback wb_workfn (flush-7:0)
Since only the read is operating as lockless (outside of the
"i_data_sem"), load tearing could introduce a logic bug. Fix it by
adding READ_ONCE() for the read and WRITE_ONCE() for the write.
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/1581085751-31793-1-git-send-email-cai@lca.pw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Wed, 12 Feb 2020 23:11:49 +0000 (18:11 -0500)]
drm/nouveau/kms/gv100-: Re-set LUT after clearing for modesets
[ Upstream commit
f287d3d19769b1d22cba4e51fa0487f2697713c9 ]
While certain modeset operations on gv100+ need us to temporarily
disable the LUT, we make the mistake of sometimes neglecting to
reprogram the LUT after such modesets. In particular, moving a head from
one encoder to another seems to trigger this quite often. GV100+ is very
picky about having a LUT in most scenarios, so this causes the display
engine to hang with the following error code:
disp: chid 1 stat
00005080 reason 5 [INVALID_STATE] mthd 0200 data
00000001 code
0000002d)
So, fix this by always re-programming the LUT if we're clearing it in a
state where the wndw is still visible, and has a XLUT handle programmed.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
facaed62b4cb ("drm/nouveau/kms/gv100: initial support")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Potapenko [Fri, 21 Feb 2020 04:04:30 +0000 (20:04 -0800)]
lib/stackdepot.c: fix global out-of-bounds in stack_slabs
[ Upstream commit
305e519ce48e935702c32241f07d393c3c8fed3e ]
Walter Wu has reported a potential case in which init_stack_slab() is
called after stack_slabs[STACK_ALLOC_MAX_SLABS - 1] has already been
initialized. In that case init_stack_slab() will overwrite
stack_slabs[STACK_ALLOC_MAX_SLABS], which may result in a memory
corruption.
Link: http://lkml.kernel.org/r/20200218102950.260263-1-glider@google.com
Fixes:
cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Walter Wu <walter-zh.wu@mediatek.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
satya priya [Tue, 11 Feb 2020 10:13:02 +0000 (15:43 +0530)]
tty: serial: qcom_geni_serial: Fix RX cancel command failure
[ Upstream commit
679aac5ead2f18d223554a52b543e1195e181811 ]
RX cancel command fails when BT is switched on and off multiple times.
To handle this, poll for the cancel bit in SE_GENI_S_IRQ_STATUS register
instead of SE_GENI_S_CMD_CTRL_REG.
As per the HPG update, handle the RX last bit after cancel command
and flush out the RX FIFO buffer.
Signed-off-by: satya priya <skakit@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1581415982-8793-1-git-send-email-skakit@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryan Case [Tue, 8 Jan 2019 01:58:37 +0000 (17:58 -0800)]
tty: serial: qcom_geni_serial: Remove xfer_mode variable
[ Upstream commit
bdc05a8a3f822ca0662464055f902faf760da6be ]
The driver only supports FIFO mode so setting and checking this variable
is unnecessary. If DMA support is ever added then such checks can be
introduced.
Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryan Case [Tue, 8 Jan 2019 01:58:36 +0000 (17:58 -0800)]
tty: serial: qcom_geni_serial: Remove set_rfr_wm() and related variables
[ Upstream commit
a85fb9ce1fab34a3216fd4d769fede643dbc68d4 ]
The variables of tx_wm and rx_wm were set to the same define value in
all cases, never updated, and the define was sometimes used
interchangably. Remove the variables/function and use the fixed value.
Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryan Case [Tue, 8 Jan 2019 01:58:35 +0000 (17:58 -0800)]
tty: serial: qcom_geni_serial: Remove use of *_relaxed() and mb()
[ Upstream commit
9e06d55f7b856bfaf82036b50072600b21e52d20 ]
A frequent side comment has been to remove the use of writel_relaxed,
readl_relaxed, and mb. This reduces driver complexity and the _relaxed
variants were not known to provide any noticeable performance benefit.
Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryan Case [Thu, 13 Dec 2018 19:43:20 +0000 (11:43 -0800)]
tty: serial: qcom_geni_serial: Remove interrupt storm
[ Upstream commit
64a428077758383518c258641e81d57fcd454792 ]
Disable M_TX_FIFO_WATERMARK_EN after we've sent all data for a given
transaction so we don't continue to receive a flurry of free space
interrupts while waiting for the M_CMD_DONE notification. Re-enable the
watermark when establishing the next transaction.
Also clear the watermark interrupt after filling the FIFO so we do not
receive notification again prior to actually having free space.
Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryan Case [Wed, 19 Dec 2018 20:33:53 +0000 (12:33 -0800)]
tty: serial: qcom_geni_serial: Fix UART hang
[ Upstream commit
663abb1a7a7ff8fea9ab0145463de7fcff823755 ]
If a serial console write occured while a UART transmit command was
waiting for a done signal then no further data would be sent until
something new kicked the system into gear. If there is already data
waiting in the circular buffer we must re-enable the tx watermark so we
receive the expected interrupts.
Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaohe Lin [Fri, 14 Feb 2020 02:32:38 +0000 (10:32 +0800)]
KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI
commit
7455a8327674e1a7c9a1f5dd1b0743ab6713f6d1 upstream.
Commit
13db77347db1 ("KVM: x86: don't notify userspace IOAPIC on edge
EOI") said, edge-triggered interrupts don't set a bit in TMR, which means
that IOAPIC isn't notified on EOI. And var level indicates level-triggered
interrupt.
But commit
3159d36ad799 ("KVM: x86: use generic function for MSI parsing")
replace var level with irq.level by mistake. Fix it by changing irq.level
to irq.trig_mode.
Cc: stable@vger.kernel.org
Fixes:
3159d36ad799 ("KVM: x86: use generic function for MSI parsing")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Tue, 4 Feb 2020 23:26:29 +0000 (15:26 -0800)]
KVM: nVMX: Don't emulate instructions in guest mode
commit
07721feee46b4b248402133228235318199b05ec upstream.
vmx_check_intercept is not yet fully implemented. To avoid emulating
instructions disallowed by the L1 hypervisor, refuse to emulate
instructions by default.
Cc: stable@vger.kernel.org
[Made commit, added commit msg - Oliver]
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Mon, 10 Feb 2020 13:45:53 +0000 (15:45 +0200)]
xhci: apply XHCI_PME_STUCK_QUIRK to Intel Comet Lake platforms
commit
a3ae87dce3a5abe0b57c811bab02b2564b574106 upstream.
Intel Comet Lake based platform require the XHCI_PME_STUCK_QUIRK
quirk as well. Without this xHC can not enter D3 in runtime suspend.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200210134553.9144-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Wed, 12 Feb 2020 06:46:16 +0000 (01:46 -0500)]
drm/amdgpu/soc15: fix xclk for raven
commit
c657b936ea98630ef5ba4f130ab1ad5c534d0165 upstream.
It's 25 Mhz (refclk / 4). This fixes the interpretation
of the rlc clock counter.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gavin Shan [Fri, 21 Feb 2020 04:04:24 +0000 (20:04 -0800)]
mm/vmscan.c: don't round up scan size for online memory cgroup
commit
76073c646f5f4999d763f471df9e38a5a912d70d upstream.
Commit
68600f623d69 ("mm: don't miss the last page because of round-off
error") makes the scan size round up to @denominator regardless of the
memory cgroup's state, online or offline. This affects the overall
reclaiming behavior: the corresponding LRU list is eligible for
reclaiming only when its size logically right shifted by @sc->priority
is bigger than zero in the former formula.
For example, the inactive anonymous LRU list should have at least 0x4000
pages to be eligible for reclaiming when we have 60/12 for
swappiness/priority and without taking scan/rotation ratio into account.
After the roundup is applied, the inactive anonymous LRU list becomes
eligible for reclaiming when its size is bigger than or equal to 0x1000
in the same condition.
(0x4000 >> 12) * 60 / (60 + 140 + 1) = 1
((0x1000 >> 12) * 60) + 200) / (60 + 140 + 1) = 1
aarch64 has 512MB huge page size when the base page size is 64KB. The
memory cgroup that has a huge page is always eligible for reclaiming in
that case.
The reclaiming is likely to stop after the huge page is reclaimed,
meaing the further iteration on @sc->priority and the silbing and child
memory cgroups will be skipped. The overall behaviour has been changed.
This fixes the issue by applying the roundup to offlined memory cgroups
only, to give more preference to reclaim memory from offlined memory
cgroup. It sounds reasonable as those memory is unlikedly to be used by
anyone.
The issue was found by starting up 8 VMs on a Ampere Mustang machine,
which has 8 CPUs and 16 GB memory. Each VM is given with 2 vCPUs and
2GB memory. It took 264 seconds for all VMs to be completely up and
784MB swap is consumed after that. With this patch applied, it took 236
seconds and 60MB swap to do same thing. So there is 10% performance
improvement for my case. Note that KSM is disable while THP is enabled
in the testing.
total used free shared buff/cache available
Mem: 16196 10065 2049 16 4081 3749
Swap: 8175 784 7391
total used free shared buff/cache available
Mem: 16196 11324 3656 24 1215 2936
Swap: 8175 60 8115
Link: http://lkml.kernel.org/r/20200211024514.8730-1-gshan@redhat.com
Fixes:
68600f623d69 ("mm: don't miss the last page because of round-off error")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [4.20+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zenghui Yu [Fri, 21 Feb 2020 02:07:25 +0000 (10:07 +0800)]
genirq/irqdomain: Make sure all irq domain flags are distinct
commit
2546287c5fb363a0165933ae2181c92f03e701d0 upstream.
This was noticed when printing debugfs for MSIs on my ARM64 server. The
new dstate IRQD_MSI_NOMASK_QUIRK came out surprisingly while it should only
be the x86 stuff for the time being...
The new MSI quirk flag uses the same bit as IRQ_DOMAIN_NAME_ALLOCATED which
is oddly defined as bit 6 for no good reason.
Switch it to the non used bit 1.
Fixes:
6f1a4891a592 ("x86/apic/msi: Plug non-maskable MSI affinity race")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200221020725.2038-1-yuzenghui@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Logan Gunthorpe [Thu, 20 Feb 2020 20:29:53 +0000 (13:29 -0700)]
nvme-multipath: Fix memory leak with ana_log_buf
commit
3b7830904e17202524bad1974505a9bfc718d31f upstream.
kmemleak reports a memory leak with the ana_log_buf allocated by
nvme_mpath_init():
unreferenced object 0xffff888120e94000 (size 8208):
comm "nvme", pid 6884, jiffies
4295020435 (age 78786.312s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000e2360188>] kmalloc_order+0x97/0xc0
[<
0000000079b18dd4>] kmalloc_order_trace+0x24/0x100
[<
00000000f50c0406>] __kmalloc+0x24c/0x2d0
[<
00000000f31a10b9>] nvme_mpath_init+0x23c/0x2b0
[<
000000005802589e>] nvme_init_identify+0x75f/0x1600
[<
0000000058ef911b>] nvme_loop_configure_admin_queue+0x26d/0x280
[<
00000000673774b9>] nvme_loop_create_ctrl+0x2a7/0x710
[<
00000000f1c7a233>] nvmf_dev_write+0xc66/0x10b9
[<
000000004199f8d0>] __vfs_write+0x50/0xa0
[<
0000000065466fef>] vfs_write+0xf3/0x280
[<
00000000b0db9a8b>] ksys_write+0xc6/0x160
[<
0000000082156b91>] __x64_sys_write+0x43/0x50
[<
00000000c34fbb6d>] do_syscall_64+0x77/0x2f0
[<
00000000bbc574c9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
nvme_mpath_init() is called by nvme_init_identify() which is called in
multiple places (nvme_reset_work(), nvme_passthru_end(), etc). This
means nvme_mpath_init() may be called multiple times before
nvme_mpath_uninit() (which is only called on nvme_free_ctrl()).
When nvme_mpath_init() is called multiple times, it overwrites the
ana_log_buf pointer with a new allocation, thus leaking the previous
allocation.
To fix this, free ana_log_buf before allocating a new one.
Fixes:
0d0b660f214dc490 ("nvme: add ANA support")
Cc: <stable@vger.kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Fri, 21 Feb 2020 04:04:18 +0000 (20:04 -0800)]
mm/memcontrol.c: lost css_put in memcg_expand_shrinker_maps()
commit
75866af62b439859d5146b7093ceb6b482852683 upstream.
for_each_mem_cgroup() increases css reference counter for memory cgroup
and requires to use mem_cgroup_iter_break() if the walk is cancelled.
Link: http://lkml.kernel.org/r/c98414fb-7e1f-da0f-867a-9340ec4bd30b@virtuozzo.com
Fixes:
0a4465d34028 ("mm, memcg: assign memcg-aware shrinkers bitmap to memcg")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioanna Alifieraki [Fri, 21 Feb 2020 04:04:00 +0000 (20:04 -0800)]
Revert "ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()"
commit
edf28f4061afe4c2d9eb1c3323d90e882c1d6800 upstream.
This reverts commit
a97955844807e327df11aa33869009d14d6b7de0.
Commit
a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage
in exit_sem()") removes a lock that is needed. This leads to a process
looping infinitely in exit_sem() and can also lead to a crash. There is
a reproducer available in [1] and with the commit reverted the issue
does not reproduce anymore.
Using the reproducer found in [1] is fairly easy to reach a point where
one of the child processes is looping infinitely in exit_sem between
for(;;) and if (semid == -1) block, while it's trying to free its last
sem_undo structure which has already been freed by freeary().
Each sem_undo struct is on two lists: one per semaphore set (list_id)
and one per process (list_proc). The list_id list tracks undos by
semaphore set, and the list_proc by process.
Undo structures are removed either by freeary() or by exit_sem(). The
freeary function is invoked when the user invokes a syscall to remove a
semaphore set. During this operation freeary() traverses the list_id
associated with the semaphore set and removes the undo structures from
both the list_id and list_proc lists.
For this case, exit_sem() is called at process exit. Each process
contains a struct sem_undo_list (referred to as "ulp") which contains
the head for the list_proc list. When the process exits, exit_sem()
traverses this list to remove each sem_undo struct. As in freeary(),
whenever a sem_undo struct is removed from list_proc, it is also removed
from the list_id list.
Removing elements from list_id is safe for both exit_sem() and freeary()
due to sem_lock(). Removing elements from list_proc is not safe;
freeary() locks &un->ulp->lock when it performs
list_del_rcu(&un->list_proc) but exit_sem() does not (locking was
removed by commit
a97955844807 ("ipc,sem: remove uneeded sem_undo_list
lock usage in exit_sem()").
This can result in the following situation while executing the
reproducer [1] : Consider a child process in exit_sem() and the parent
in freeary() (because of semctl(sid[i], NSEM, IPC_RMID)).
- The list_proc for the child contains the last two undo structs A and
B (the rest have been removed either by exit_sem() or freeary()).
- The semid for A is 1 and semid for B is 2.
- exit_sem() removes A and at the same time freeary() removes B.
- Since A and B have different semid sem_lock() will acquire different
locks for each process and both can proceed.
The bug is that they remove A and B from the same list_proc at the same
time because only freeary() acquires the ulp lock. When exit_sem()
removes A it makes ulp->list_proc.next to point at B and at the same
time freeary() removes B setting B->semid=-1.
At the next iteration of for(;;) loop exit_sem() will try to remove B.
The only way to break from for(;;) is for (&un->list_proc ==
&ulp->list_proc) to be true which is not. Then exit_sem() will check if
B->semid=-1 which is and will continue looping in for(;;) until the
memory for B is reallocated and the value at B->semid is changed.
At that point, exit_sem() will crash attempting to unlink B from the
lists (this can be easily triggered by running the reproducer [1] a
second time).
To prove this scenario instrumentation was added to keep information
about each sem_undo (un) struct that is removed per process and per
semaphore set (sma).
CPU0 CPU1
[caller holds sem_lock(sma for A)] ...
freeary() exit_sem()
... ...
... sem_lock(sma for B)
spin_lock(A->ulp->lock) ...
list_del_rcu(un_A->list_proc) list_del_rcu(un_B->list_proc)
Undo structures A and B have different semid and sem_lock() operations
proceed. However they belong to the same list_proc list and they are
removed at the same time. This results into ulp->list_proc.next
pointing to the address of B which is already removed.
After reverting commit
a97955844807 ("ipc,sem: remove uneeded
sem_undo_list lock usage in exit_sem()") the issue was no longer
reproducible.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1694779
Link: http://lkml.kernel.org/r/20191211191318.11860-1-ioanna-maria.alifieraki@canonical.com
Fixes:
a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()")
Signed-off-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Herton R. Krzesinski <herton@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: <malat@debian.org>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Wed, 12 Feb 2020 16:04:33 +0000 (18:04 +0200)]
MAINTAINERS: Update drm/i915 bug filing URL
commit
96228b7df33f8eb9006f8ae96949400aed9bd303 upstream.
We've moved from bugzilla to gitlab.
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212160434.6437-1-jani.nikula@intel.com
(cherry picked from commit
3a6a4f0810c8ade6f1ff63c34aa9834176b9d88b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 10 Feb 2020 14:57:30 +0000 (15:57 +0100)]
serdev: ttyport: restore client ops on deregistration
commit
0c5aae59270fb1f827acce182786094c9ccf598e upstream.
The serdev tty-port controller driver should reset the tty-port client
operations also on deregistration to avoid a NULL-pointer dereference in
case the port is later re-registered as a normal tty device.
Note that this can only happen with tty drivers such as 8250 which have
statically allocated port structures that can end up being reused and
where a later registration would not register a serdev controller (e.g.
due to registration errors or if the devicetree has been changed in
between).
Specifically, this can be an issue for any statically defined ports that
would be registered by 8250 core when an 8250 driver is being unbound.
Fixes:
bed35c6dfa6a ("serdev: add a tty port controller driver")
Cc: stable <stable@vger.kernel.org> # 4.11
Reported-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200210145730.22762-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fugang Duan [Tue, 11 Feb 2020 06:16:01 +0000 (14:16 +0800)]
tty: serial: imx: setup the correct sg entry for tx dma
commit
f76707831829530ffdd3888bebc108aecefccaa0 upstream.
There has oops as below happen on i.MX8MP EVK platform that has
6G bytes DDR memory.
when (xmit->tail < xmit->head) && (xmit->head == 0),
it setups one sg entry with sg->length is zero:
sg_set_buf(sgl + 1, xmit->buf, xmit->head);
if xmit->buf is allocated from >4G address space, and SDMA only
support <4G address space, then dma_map_sg() will call swiotlb_map()
to do bounce buffer copying and mapping.
But swiotlb_map() don't allow sg entry's length is zero, otherwise
report BUG_ON().
So the patch is to correct the tx DMA scatter list.
Oops:
[ 287.675715] kernel BUG at kernel/dma/swiotlb.c:497!
[ 287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 287.686075] Modules linked in:
[ 287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10
[ 287.696872] Hardware name: FSL i.MX8MP EVK (DT)
[ 287.701402] pstate:
80000085 (Nzcv daIf -PAN -UAO)
[ 287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310
[ 287.711076] lr : swiotlb_map+0x60/0x148
[ 287.714909] sp :
ffff800010003c00
[ 287.718221] x29:
ffff800010003c00 x28:
0000000000000000
[ 287.723533] x27:
0000000000000040 x26:
ffff800011ae0000
[ 287.728844] x25:
ffff800011ae09f8 x24:
0000000000000000
[ 287.734155] x23:
00000001b7af9000 x22:
0000000000000000
[ 287.739465] x21:
ffff000176409c10 x20:
00000000001f7ffe
[ 287.744776] x19:
ffff000176409c10 x18:
000000000000002e
[ 287.750087] x17:
0000000000000000 x16:
0000000000000000
[ 287.755397] x15:
0000000000000000 x14:
0000000000000000
[ 287.760707] x13:
ffff00017f334000 x12:
0000000000000001
[ 287.766018] x11:
00000000001fffff x10:
0000000000000000
[ 287.771328] x9 :
0000000000000003 x8 :
0000000000000000
[ 287.776638] x7 :
0000000000000000 x6 :
0000000000000000
[ 287.781949] x5 :
0000000000200000 x4 :
0000000000000000
[ 287.787259] x3 :
0000000000000001 x2 :
00000001b7af9000
[ 287.792570] x1 :
00000000fbfff000 x0 :
0000000000000000
[ 287.797881] Call trace:
[ 287.800328] swiotlb_tbl_map_single+0x1fc/0x310
[ 287.804859] swiotlb_map+0x60/0x148
[ 287.808347] dma_direct_map_page+0xf0/0x130
[ 287.812530] dma_direct_map_sg+0x78/0xe0
[ 287.816453] imx_uart_dma_tx+0x134/0x2f8
[ 287.820374] imx_uart_dma_tx_callback+0xd8/0x168
[ 287.824992] vchan_complete+0x194/0x200
[ 287.828828] tasklet_action_common.isra.0+0x154/0x1a0
[ 287.833879] tasklet_action+0x24/0x30
[ 287.837540] __do_softirq+0x120/0x23c
[ 287.841202] irq_exit+0xb8/0xd8
[ 287.844343] __handle_domain_irq+0x64/0xb8
[ 287.848438] gic_handle_irq+0x5c/0x148
[ 287.852185] el1_irq+0xb8/0x180
[ 287.855327] cpuidle_enter_state+0x84/0x360
[ 287.859508] cpuidle_enter+0x34/0x48
[ 287.863083] call_cpuidle+0x18/0x38
[ 287.866571] do_idle+0x1e0/0x280
[ 287.869798] cpu_startup_entry+0x20/0x40
[ 287.873721] rest_init+0xd4/0xe0
[ 287.876949] arch_call_rest_init+0xc/0x14
[ 287.880958] start_kernel+0x420/0x44c
[ 287.884622] Code:
9124c021 9417aff8 a94363f7 17ffffd5 (
d4210000)
[ 287.890718] ---[ end trace
5bc44c4ab6b009ce ]---
[ 287.895334] Kernel panic - not syncing: Fatal exception in interrupt
[ 287.901686] SMP: stopping secondary CPUs
[ 288.905607] SMP: failed to stop secondary CPUs 0-1
[ 288.910395] Kernel Offset: disabled
[ 288.913882] CPU features: 0x0002,
2000200c
[ 288.917888] Memory Limit: none
[ 288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Reported-by: Eagle Zhou <eagle.zhou@nxp.com>
Tested-by: Eagle Zhou <eagle.zhou@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Fixes:
7942f8577f2a ("serial: imx: TX DMA: clean up sg initialization")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Ferre [Mon, 10 Feb 2020 15:20:53 +0000 (16:20 +0100)]
tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
commit
04b5bfe3dc94e64d0590c54045815cb5183fb095 upstream.
In atmel_shutdown() we call atmel_stop_rx() and atmel_stop_tx() functions.
Prevent the rx restart that is implemented in RS485 or ISO7816 modes when
calling atmel_stop_tx() by using the atomic information tasklet_shutdown
that is already in place for this purpose.
Fixes:
98f2082c3ac4 ("tty/serial: atmel: enforce tasklet init and termination sequences")
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200210152053.8289-1-nicolas.ferre@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Tue, 11 Feb 2020 13:55:59 +0000 (15:55 +0200)]
serial: 8250: Check UPF_IRQ_SHARED in advance
commit
7febbcbc48fc92e3f33863b32ed715ba4aff18c4 upstream.
The commit
54e53b2e8081
("tty: serial: 8250: pass IRQ shared flag to UART ports")
nicely explained the problem:
---8<---8<---
On some systems IRQ lines between multiple UARTs might be shared. If so, the
irqflags have to be configured accordingly. The reason is: The 8250 port startup
code performs IRQ tests *before* the IRQ handler for that particular port is
registered. This is performed in serial8250_do_startup(). This function checks
whether IRQF_SHARED is configured and only then disables the IRQ line while
testing.
This test is performed upon each open() of the UART device. Imagine two UARTs
share the same IRQ line: On is already opened and the IRQ is active. When the
second UART is opened, the IRQ line has to be disabled while performing IRQ
tests. Otherwise an IRQ might handler might be invoked, but the IRQ itself
cannot be handled, because the corresponding handler isn't registered,
yet. That's because the 8250 code uses a chain-handler and invokes the
corresponding port's IRQ handling routines himself.
Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device
tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't
disabled while performing tests and the kernel correctly detects a spurious
IRQ. So, adding this flag to the DT probe solves the issue.
Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the
IRQF_SHARED flag can be set unconditionally as well.
Example stack trace by performing `echo 1 > /dev/ttyS2` on a non-patched system:
|irq 85: nobody cared (try booting with the "irqpoll" option)
| [...]
|handlers:
|[<
ffff0000080fc628>] irq_default_primary_handler threaded [<
ffff00000855fbb8>] serial8250_interrupt
|Disabling IRQ #85
---8<---8<---
But unfortunately didn't fix the root cause. Let's try again here by moving
IRQ flag assignment from serial_link_irq_chain() to serial8250_do_startup().
This should fix the similar issue reported for 8250_pnp case.
Since this change we don't need to have custom solutions in 8250_aspeed_vuart
and 8250_of drivers, thus, drop them.
Fixes:
1c2f04937b3e ("serial: 8250: add IRQ trigger support")
Reported-by: Li RongQing <lirongqing@baidu.com>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20200211135559.85960-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kim Phillips [Wed, 19 Feb 2020 17:52:43 +0000 (18:52 +0100)]
x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF
commit
21b5ee59ef18e27d85810584caf1f7ddc705ea83 upstream.
Commit
aaf248848db50 ("perf/x86/msr: Add AMD IRPERF (Instructions Retired)
performance counter")
added support for access to the free-running counter via 'perf -e
msr/irperf/', but when exercised, it always returns a 0 count:
BEFORE:
$ perf stat -e instructions,msr/irperf/ true
Performance counter stats for 'true':
624,833 instructions
0 msr/irperf/
Simply set its enable bit - HWCR bit 30 - to make it start counting.
Enablement is restricted to all machines advertising IRPERF capability,
except those susceptible to an erratum that makes the IRPERF return
bad values.
That erratum occurs in Family 17h models 00-1fh [1], but not in F17h
models 20h and above [2].
AFTER (on a family 17h model 31h machine):
$ perf stat -e instructions,msr/irperf/ true
Performance counter stats for 'true':
621,690 instructions
622,490 msr/irperf/
[1] Revision Guide for AMD Family 17h Models 00h-0Fh Processors
[2] Revision Guide for AMD Family 17h Models 30h-3Fh Processors
The revision guides are available from the bugzilla Link below.
[ bp: Massage commit message. ]
Fixes:
aaf248848db50 ("perf/x86/msr: Add AMD IRPERF (Instructions Retired) performance counter")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: http://lkml.kernel.org/r/20200214201805.13830-1-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Thu, 13 Feb 2020 18:01:34 +0000 (19:01 +0100)]
x86/mce/amd: Fix kobject lifetime
commit
51dede9c05df2b78acd6dcf6a17d21f0877d2d7b upstream.
Accessing the MCA thresholding controls in sysfs concurrently with CPU
hotplug can lead to a couple of KASAN-reported issues:
BUG: KASAN: use-after-free in sysfs_file_ops+0x155/0x180
Read of size 8 at addr
ffff888367578940 by task grep/4019
and
BUG: KASAN: use-after-free in show_error_count+0x15c/0x180
Read of size 2 at addr
ffff888368a05514 by task grep/4454
for example. Both result from the fact that the threshold block
creation/teardown code frees the descriptor memory itself instead of
defining proper ->release function and leaving it to the driver core to
take care of that, after all sysfs accesses have completed.
Do that and get rid of the custom freeing code, fixing the above UAFs in
the process.
[ bp: write commit message. ]
Fixes:
95268664390b ("[PATCH] x86_64: mce_amd support for family 0x10 processors")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200214082801.13836-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Tue, 4 Feb 2020 12:28:41 +0000 (13:28 +0100)]
x86/mce/amd: Publish the bank pointer only after setup has succeeded
commit
6e5cf31fbe651bed7ba1df768f2e123531132417 upstream.
threshold_create_bank() creates a bank descriptor per MCA error
thresholding counter which can be controlled over sysfs. It publishes
the pointer to that bank in a per-CPU variable and then goes on to
create additional thresholding blocks if the bank has such.
However, that creation of additional blocks in
allocate_threshold_blocks() can fail, leading to a use-after-free
through the per-CPU pointer.
Therefore, publish that pointer only after all blocks have been setup
successfully.
Fixes:
019f34fccfd5 ("x86, MCE, AMD: Move shared bank to node descriptor")
Reported-by: Saar Amar <Saar.Amar@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200128140846.phctkvx5btiexvbx@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wangyan [Thu, 20 Feb 2020 13:46:14 +0000 (21:46 +0800)]
jbd2: fix ocfs2 corrupt when clearing block group bits
commit
8eedabfd66b68a4623beec0789eac54b8c9d0fb6 upstream.
I found a NULL pointer dereference in ocfs2_block_group_clear_bits().
The running environment:
kernel version: 4.19
A cluster with two nodes, 5 luns mounted on two nodes, and do some
file operations like dd/fallocate/truncate/rm on every lun with storage
network disconnection.
The fallocate operation on dm-23-45 caused an null pointer dereference.
The information of NULL pointer dereference as follows:
[577992.878282] JBD2: Error -5 detected when updating journal superblock for dm-23-45.
[577992.878290] Aborting journal on device dm-23-45.
...
[577992.890778] JBD2: Error -5 detected when updating journal superblock for dm-24-46.
[577992.890908] __journal_remove_journal_head: freeing b_committed_data
[577992.890916] (fallocate,88392,52):ocfs2_extend_trans:474 ERROR: status = -30
[577992.890918] __journal_remove_journal_head: freeing b_committed_data
[577992.890920] (fallocate,88392,52):ocfs2_rotate_tree_right:2500 ERROR: status = -30
[577992.890922] __journal_remove_journal_head: freeing b_committed_data
[577992.890924] (fallocate,88392,52):ocfs2_do_insert_extent:4382 ERROR: status = -30
[577992.890928] (fallocate,88392,52):ocfs2_insert_extent:4842 ERROR: status = -30
[577992.890928] __journal_remove_journal_head: freeing b_committed_data
[577992.890930] (fallocate,88392,52):ocfs2_add_clusters_in_btree:4947 ERROR: status = -30
[577992.890933] __journal_remove_journal_head: freeing b_committed_data
[577992.890939] __journal_remove_journal_head: freeing b_committed_data
[577992.890949] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000020
[577992.890950] Mem abort info:
[577992.890951] ESR = 0x96000004
[577992.890952] Exception class = DABT (current EL), IL = 32 bits
[577992.890952] SET = 0, FnV = 0
[577992.890953] EA = 0, S1PTW = 0
[577992.890954] Data abort info:
[577992.890955] ISV = 0, ISS = 0x00000004
[577992.890956] CM = 0, WnR = 0
[577992.890958] user pgtable: 4k pages, 48-bit VAs, pgdp =
00000000f8da07a9
[577992.890960] [
0000000000000020] pgd=
0000000000000000
[577992.890964] Internal error: Oops:
96000004 [#1] SMP
[577992.890965] Process fallocate (pid: 88392, stack limit = 0x00000000013db2fd)
[577992.890968] CPU: 52 PID: 88392 Comm: fallocate Kdump: loaded Tainted: G W OE 4.19.36 #1
[577992.890969] Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019
[577992.890971] pstate:
60400009 (nZCv daif +PAN -UAO)
[577992.891054] pc : _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2]
[577992.891082] lr : _ocfs2_free_suballoc_bits+0x618/0x968 [ocfs2]
[577992.891084] sp :
ffff0000c8e2b810
[577992.891085] x29:
ffff0000c8e2b820 x28:
0000000000000000
[577992.891087] x27:
00000000000006f3 x26:
ffffa07957b02e70
[577992.891089] x25:
ffff807c59d50000 x24:
00000000000006f2
[577992.891091] x23:
0000000000000001 x22:
ffff807bd39abc30
[577992.891093] x21:
ffff0000811d9000 x20:
ffffa07535d6a000
[577992.891097] x19:
ffff000001681638 x18:
ffffffffffffffff
[577992.891098] x17:
0000000000000000 x16:
ffff000080a03df0
[577992.891100] x15:
ffff0000811d9708 x14:
203d207375746174
[577992.891101] x13:
73203a524f525245 x12:
20373439343a6565
[577992.891103] x11:
0000000000000038 x10:
0101010101010101
[577992.891106] x9 :
ffffa07c68a85d70 x8 :
7f7f7f7f7f7f7f7f
[577992.891109] x7 :
0000000000000000 x6 :
0000000000000080
[577992.891110] x5 :
0000000000000000 x4 :
0000000000000002
[577992.891112] x3 :
ffff000001713390 x2 :
2ff90f88b1c22f00
[577992.891114] x1 :
ffff807bd39abc30 x0 :
0000000000000000
[577992.891116] Call trace:
[577992.891139] _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2]
[577992.891162] _ocfs2_free_clusters+0x100/0x290 [ocfs2]
[577992.891185] ocfs2_free_clusters+0x50/0x68 [ocfs2]
[577992.891206] ocfs2_add_clusters_in_btree+0x198/0x5e0 [ocfs2]
[577992.891227] ocfs2_add_inode_data+0x94/0xc8 [ocfs2]
[577992.891248] ocfs2_extend_allocation+0x1bc/0x7a8 [ocfs2]
[577992.891269] ocfs2_allocate_extents+0x14c/0x338 [ocfs2]
[577992.891290] __ocfs2_change_file_space+0x3f8/0x610 [ocfs2]
[577992.891309] ocfs2_fallocate+0xe4/0x128 [ocfs2]
[577992.891316] vfs_fallocate+0x11c/0x250
[577992.891317] ksys_fallocate+0x54/0x88
[577992.891319] __arm64_sys_fallocate+0x28/0x38
[577992.891323] el0_svc_common+0x78/0x130
[577992.891325] el0_svc_handler+0x38/0x78
[577992.891327] el0_svc+0x8/0xc
My analysis process as follows:
ocfs2_fallocate
__ocfs2_change_file_space
ocfs2_allocate_extents
ocfs2_extend_allocation
ocfs2_add_inode_data
ocfs2_add_clusters_in_btree
ocfs2_insert_extent
ocfs2_do_insert_extent
ocfs2_rotate_tree_right
ocfs2_extend_rotate_transaction
ocfs2_extend_trans
jbd2_journal_restart
jbd2__journal_restart
/* handle->h_transaction is NULL,
* is_handle_aborted(handle) is true
*/
handle->h_transaction = NULL;
start_this_handle
return -EROFS;
ocfs2_free_clusters
_ocfs2_free_clusters
_ocfs2_free_suballoc_bits
ocfs2_block_group_clear_bits
ocfs2_journal_access_gd
__ocfs2_journal_access
jbd2_journal_get_undo_access
/* I think jbd2_write_access_granted() will
* return true, because do_get_write_access()
* will return -EROFS.
*/
if (jbd2_write_access_granted(...)) return 0;
do_get_write_access
/* handle->h_transaction is NULL, it will
* return -EROFS here, so do_get_write_access()
* was not called.
*/
if (is_handle_aborted(handle)) return -EROFS;
/* bh2jh(group_bh) is NULL, caused NULL
pointer dereference */
undo_bg = (struct ocfs2_group_desc *)
bh2jh(group_bh)->b_committed_data;
If handle->h_transaction == NULL, then jbd2_write_access_granted()
does not really guarantee that journal_head will stay around,
not even speaking of its b_committed_data. The bh2jh(group_bh)
can be removed after ocfs2_journal_access_gd() and before call
"bh2jh(group_bh)->b_committed_data". So, we should move
is_handle_aborted() check from do_get_write_access() into
jbd2_journal_get_undo_access() and jbd2_journal_get_write_access()
before the call to jbd2_write_access_granted().
Link: https://lore.kernel.org/r/f72a623f-b3f1-381a-d91d-d22a1c83a336@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo Luiz Duarte [Tue, 11 Feb 2020 03:38:29 +0000 (00:38 -0300)]
powerpc/tm: Fix clearing MSR[TS] in current when reclaiming on signal delivery
commit
2464cc4c345699adea52c7aef75707207cb8a2f6 upstream.
After a treclaim, we expect to be in non-transactional state. If we
don't clear the current thread's MSR[TS] before we get preempted, then
tm_recheckpoint_new_task() will recheckpoint and we get rescheduled in
suspended transaction state.
When handling a signal caught in transactional state,
handle_rt_signal64() calls get_tm_stackpointer() that treclaims the
transaction using tm_reclaim_current() but without clearing the
thread's MSR[TS]. This can cause the TM Bad Thing exception below if
later we pagefault and get preempted trying to access the user's
sigframe, using __put_user(). Afterwards, when we are rescheduled back
into do_page_fault() (but now in suspended state since the thread's
MSR[TS] was not cleared), upon executing 'rfid' after completion of
the page fault handling, the exception is raised because a transition
from suspended to non-transactional state is invalid.
Unexpected TM Bad Thing exception at
c00000000000de44 (msr 0x8000000302a03031) tm_scratch=
800000010280b033
Oops: Unrecoverable exception, sig: 6 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
CPU: 25 PID: 15547 Comm: a.out Not tainted 5.4.0-rc2 #32
NIP:
c00000000000de44 LR:
c000000000034728 CTR:
0000000000000000
REGS:
c00000003fe7bd70 TRAP: 0700 Not tainted (5.4.0-rc2)
MSR:
8000000302a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[SE]> CR:
44000884 XER:
00000000
CFAR:
c00000000000dda4 IRQMASK: 0
PACATMSCRATCH:
800000010280b033
GPR00:
c000000000034728 c000000f65a17c80 c000000001662800 00007fffacf3fd78
GPR04:
0000000000001000 0000000000001000 0000000000000000 c000000f611f8af0
GPR08:
0000000000000000 0000000078006001 0000000000000000 000c000000000000
GPR12:
c000000f611f84b0 c00000003ffcb200 0000000000000000 0000000000000000
GPR16:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20:
0000000000000000 0000000000000000 0000000000000000 c000000f611f8140
GPR24:
0000000000000000 00007fffacf3fd68 c000000f65a17d90 c000000f611f7800
GPR28:
c000000f65a17e90 c000000f65a17e90 c000000001685e18 00007fffacf3f000
NIP [
c00000000000de44] fast_exception_return+0xf4/0x1b0
LR [
c000000000034728] handle_rt_signal64+0x78/0xc50
Call Trace:
[
c000000f65a17c80] [
c000000000034710] handle_rt_signal64+0x60/0xc50 (unreliable)
[
c000000f65a17d30] [
c000000000023640] do_notify_resume+0x330/0x460
[
c000000f65a17e20] [
c00000000000dcc4] ret_from_except_lite+0x70/0x74
Instruction dump:
7c4ff120 e8410170 7c5a03a6 38400000 f8410060 e8010070 e8410080 e8610088
60000000 60000000 e8810090 e8210078 <
4c000024>
48000000 e8610178 88ed0989
---[ end trace
93094aa44b442f87 ]---
The simplified sequence of events that triggers the above exception is:
... # userspace in NON-TRANSACTIONAL state
tbegin # userspace in TRANSACTIONAL state
signal delivery # kernelspace in SUSPENDED state
handle_rt_signal64()
get_tm_stackpointer()
treclaim # kernelspace in NON-TRANSACTIONAL state
__put_user()
page fault happens. We will never get back here because of the TM Bad Thing exception.
page fault handling kicks in and we voluntarily preempt ourselves
do_page_fault()
__schedule()
__switch_to(other_task)
our task is rescheduled and we recheckpoint because the thread's MSR[TS] was not cleared
__switch_to(our_task)
switch_to_tm()
tm_recheckpoint_new_task()
trechkpt # kernelspace in SUSPENDED state
The page fault handling resumes, but now we are in suspended transaction state
do_page_fault() completes
rfid <----- trying to get back where the page fault happened (we were non-transactional back then)
TM Bad Thing # illegal transition from suspended to non-transactional
This patch fixes that issue by clearing the current thread's MSR[TS]
just after treclaim in get_tm_stackpointer() so that we stay in
non-transactional state in case we are preempted. In order to make
treclaim and clearing the thread's MSR[TS] atomic from a preemption
perspective when CONFIG_PREEMPT is set, preempt_disable/enable() is
used. It's also necessary to save the previous value of the thread's
MSR before get_tm_stackpointer() is called so that it can be exposed
to the signal handler later in setup_tm_sigcontexts() to inform the
userspace MSR at the moment of the signal delivery.
Found with tm-signal-context-force-tm kernel selftest.
Fixes:
2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9
Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200211033831.11165-1-gustavold@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 10 Feb 2020 18:02:33 +0000 (12:02 -0600)]
staging: rtl8723bs: Fix potential overuse of kernel memory
commit
23954cb078febfc63a755301fe77e06bccdb4d2a upstream.
In routine wpa_supplicant_ioctl(), the user-controlled p->length is
checked to be at least the size of struct ieee_param size, but the code
does not detect the case where p->length is greater than the size
of the struct, thus a malicious user could be wasting kernel memory.
Fixes commit
554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver").
Reported by: Pietro Oliva <pietroliva@gmail.com>
Cc: Pietro Oliva <pietroliva@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Fixes:
554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver").
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20200210180235.21691-5-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 10 Feb 2020 18:02:31 +0000 (12:02 -0600)]
staging: rtl8723bs: Fix potential security hole
commit
ac33597c0c0d1d819dccfe001bcd0acef7107e7c upstream.
In routine rtw_hostapd_ioctl(), the user-controlled p->length is assumed
to be at least the size of struct ieee_param size, but this assumption is
never checked. This could result in out-of-bounds read/write on kernel
heap in case a p->length less than the size of struct ieee_param is
specified by the user. If p->length is allowed to be greater than the size
of the struct, then a malicious user could be wasting kernel memory.
Fixes commit
554c0a3abf216 ("0taging: Add rtl8723bs sdio wifi driver").
Reported by: Pietro Oliva <pietroliva@gmail.com>
Cc: Pietro Oliva <pietroliva@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Fixes
554c0a3abf216 ("0taging: Add rtl8723bs sdio wifi driver").
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20200210180235.21691-3-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 10 Feb 2020 18:02:32 +0000 (12:02 -0600)]
staging: rtl8188eu: Fix potential overuse of kernel memory
commit
4ddf8ab8d15ddbc52eefb44eb64e38466ce1f70f upstream.
In routine wpa_supplicant_ioctl(), the user-controlled p->length is
checked to be at least the size of struct ieee_param size, but the code
does not detect the case where p->length is greater than the size
of the struct, thus a malicious user could be wasting kernel memory.
Fixes commit
a2c60d42d97c ("Add files for new driver - part 16").
Reported by: Pietro Oliva <pietroliva@gmail.com>
Cc: Pietro Oliva <pietroliva@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Fixes commit
a2c60d42d97c ("Add files for new driver - part 16").
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20200210180235.21691-4-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 10 Feb 2020 18:02:30 +0000 (12:02 -0600)]
staging: rtl8188eu: Fix potential security hole
commit
499c405b2b80bb3a04425ba3541d20305e014d3e upstream.
In routine rtw_hostapd_ioctl(), the user-controlled p->length is assumed
to be at least the size of struct ieee_param size, but this assumption is
never checked. This could result in out-of-bounds read/write on kernel
heap in case a p->length less than the size of struct ieee_param is
specified by the user. If p->length is allowed to be greater than the size
of the struct, then a malicious user could be wasting kernel memory.
Fixes commit
a2c60d42d97c ("Add files for new driver - part 16").
Reported by: Pietro Oliva <pietroliva@gmail.com>
Cc: Pietro Oliva <pietroliva@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Fixes:
a2c60d42d97c ("staging: r8188eu: Add files for new driver - part 16")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20200210180235.21691-2-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anurag Kumar Vulisha [Mon, 27 Jan 2020 19:30:46 +0000 (19:30 +0000)]
usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
commit
5ee858975b13a9b40db00f456989a689fdbb296c upstream.
The current code in dwc3_gadget_ep_reclaim_completed_trb() will
check for IOC/LST bit in the event->status and returns if
IOC/LST bit is set. This logic doesn't work if multiple TRBs
are queued per request and the IOC/LST bit is set on the last
TRB of that request.
Consider an example where a queued request has multiple queued
TRBs and IOC/LST bit is set only for the last TRB. In this case,
the core generates XferComplete/XferInProgress events only for
the last TRB (since IOC/LST are set only for the last TRB). As
per the logic in dwc3_gadget_ep_reclaim_completed_trb()
event->status is checked for IOC/LST bit and returns on the
first TRB. This leaves the remaining TRBs left unhandled.
Similarly, if the gadget function enqueues an unaligned request
with sglist already in it, it should fail the same way, since we
will append another TRB to something that already uses more than
one TRB.
To aviod this, this patch changes the code to check for IOC/LST
bits in TRB->ctrl instead.
At a practical level, this patch resolves USB transfer stalls seen
with adb on dwc3 based HiKey960 after functionfs gadget added
scatter-gather support around v4.20.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Yang Fei <fei.yang@intel.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linux USB List <linux-usb@vger.kernel.org>
Cc: stable <stable@vger.kernel.org>
Tested-by: Tejas Joglekar <tejas.joglekar@synopsys.com>
Reviewed-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
[jstultz: forward ported to mainline, reworded commit log, reworked
to only check trb->ctrl as suggested by Felipe]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minas Harutyunyan [Tue, 21 Jan 2020 10:17:07 +0000 (14:17 +0400)]
usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows
commit
9a0d6f7c0a83844baae1d6d85482863d2bf3b7a7 upstream.
SET/CLEAR_FEATURE for Remote Wakeup allowance not handled correctly.
GET_STATUS handling provided not correct data on DATA Stage.
Issue seen when gadget's dr_mode set to "otg" mode and connected
to MacOS.
Both are fixed and tested using USBCV Ch.9 tests.
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Fixes:
fa389a6d7726 ("usb: dwc2: gadget: Add remote_wakeup_allowed flag")
Tested-by: Jack Mitchell <ml@embed.me.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hardik Gajjar [Thu, 6 Feb 2020 11:49:23 +0000 (12:49 +0100)]
USB: hub: Fix the broken detection of USB3 device in SMSC hub
commit
1208f9e1d758c991b0a46a1bd60c616b906bbe27 upstream.
Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able
to detect the USB3.0 mass storage devices or is detecting those as
USB2.0 high speed devices.
The explanation given by Renesas is that, due to a HW issue, the XHCI
driver does not wake up after going to sleep on connecting a USB3.0
device.
In order to mitigate that, disable the auto-suspend feature
specifically for SMSC hubs from hub_probe() function, as a quirk.
Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which
are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power,
configurable hub controller.
[1] SanDisk USB 3.0 device detected as USB-2.0 before the patch
[ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd
[ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 74.077303] usb 5-1.1: Product: Ultra
[ 74.080980] usb 5-1.1: Manufacturer: SanDisk
[ 74.085263] usb 5-1.1: SerialNumber:
4C530001110208116550
[2] SanDisk USB 3.0 device detected as USB-3.0 after the patch
[ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 34.604430] usb 6-1.1: Product: Ultra
[ 34.608110] usb 6-1.1: Manufacturer: SanDisk
[ 34.612397] usb 6-1.1: SerialNumber:
4C530001110208116550
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1580989763-32291-1-git-send-email-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Fri, 31 Jan 2020 15:39:26 +0000 (10:39 -0500)]
USB: hub: Don't record a connect-change event during reset-resume
commit
8099f58f1ecddf4f374f4828a3dff8397c7cbd74 upstream.
Paul Zimmerman reports that his USB Bluetooth adapter sometimes
crashes following system resume, when it receives a
Get-Device-Descriptor request while it is busy doing something else.
Such a request was added by commit
a4f55d8b8c14 ("usb: hub: Check
device descriptor before resusciation"). It gets sent when the hub
driver's work thread checks whether a connect-change event on an
enabled port really indicates a new device has been connected, as
opposed to an old device momentarily disconnecting and then
reconnecting (which can happen with xHCI host controllers, since they
automatically enable connected ports).
The same kind of thing occurs when a port's power session is lost
during system suspend. When the system wakes up it sees a
connect-change event on the port, and if the child device's
persist_enabled flag was set then hub_activate() sets the device's
reset_resume flag as well as the port's bit in hub->change_bits. The
reset-resume code then takes responsibility for checking that the same
device is still attached to the port, and it does this as part of the
device's resume pathway. By the time the hub driver's work thread
starts up again, the device has already been fully reinitialized and
is busy doing its own thing. There's no need for the work thread to
do the same check a second time, and in fact this unnecessary check is
what caused the problem that Paul observed.
Note that performing the unnecessary check is not actually a bug.
Devices are supposed to be able to send descriptors back to the host
even when they are busy doing something else. The underlying cause of
Paul's problem lies in his Bluetooth adapter. Nevertheless, we
shouldn't perform the same check twice in a row -- and as a nice side
benefit, removing the extra check allows the Bluetooth adapter to work
more reliably.
The work thread performs its check when it sees that the port's bit is
set in hub->change_bits. In this situation that bit is interpreted as
though a connect-change event had occurred on the port _after_ the
reset-resume, which is not what actually happened.
One possible fix would be to make the reset-resume code clear the
port's bit in hub->change_bits. But it seems simpler to just avoid
setting the bit during hub_activate() in the first place. That's what
this patch does.
(Proving that the patch is correct when CONFIG_PM is disabled requires
a little thought. In that setting hub_activate() will be called only
for initialization and resets, since there won't be any resumes or
reset-resumes. During initialization and hub resets the hub doesn't
have any child devices, and so this code path never gets executed.)
Reported-and-tested-by: Paul Zimmerman <pauldzim@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://marc.info/?t=157949360700001&r=1&w=2
CC: David Heinzelmann <heinzelmann.david@gmail.com>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001311037460.1577-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Dodd [Wed, 12 Feb 2020 14:22:18 +0000 (14:22 +0000)]
USB: Fix novation SourceControl XL after suspend
commit
b692056db8ecc7f452b934f016c17348282b7699 upstream.
Currently, the SourceControl will stay in power-down mode after resuming
from suspend. This patch resets the device after suspend to power it up.
Signed-off-by: Richard Dodd <richard.o.dodd@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212142220.36892-1-richard.o.dodd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EJ Hsu [Thu, 30 Jan 2020 09:25:06 +0000 (01:25 -0800)]
usb: uas: fix a plug & unplug racing
commit
3e99862c05a9caa5a27969f41566b428696f5a9a upstream.
When a uas disk is plugged into an external hub, uas_probe()
will be called by the hub thread to do the probe. It will
first create a SCSI host and then do the scan for this host.
During the scan, it will probe the LUN using SCSI INQUERY command
which will be packed in the URB and submitted to uas disk.
There might be a chance that this external hub with uas disk
attached is unplugged during the scan. In this case, uas driver
will fail to submit the URB (due to the NOTATTACHED state of uas
device) and try to put this SCSI command back to request queue
waiting for next chance to run.
In normal case, this cycle will terminate when hub thread gets
disconnection event and calls into uas_disconnect() accordingly.
But in this case, uas_disconnect() will not be called because
hub thread of external hub gets stuck waiting for the completion
of this SCSI command. A deadlock happened.
In this fix, uas will call scsi_scan_host() asynchronously to
avoid the blocking of hub thread.
Signed-off-by: EJ Hsu <ejh@nvidia.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200130092506.102760-1-ejh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 3 Feb 2020 15:38:29 +0000 (16:38 +0100)]
USB: quirks: blacklist duplicate ep on Sound Devices USBPre2
commit
bdd1b147b8026df0e4260b387026b251d888ed01 upstream.
This device has a broken vendor-specific altsetting for interface 1,
where endpoint 0x85 is declared as an isochronous endpoint despite being
used by interface 2 for audio capture.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x0926
idProduct 0x0202
bcdDevice 1.00
iManufacturer 1 Sound Devices
iProduct 2 USBPre2
iSerial 3 [...]
bNumConfigurations 1
[...]
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0126 1x 294 bytes
bInterval 1
[...]
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 4
bDelay 1 frames
wFormatTag 0x0001 PCM
AudioStreaming Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 2
bSubframeSize 2
bBitResolution 16
bSamFreqType 6 Discrete
tSamFreq[ 0] 8000
tSamFreq[ 1] 16000
tSamFreq[ 2] 24000
tSamFreq[ 3] 32000
tSamFreq[ 4] 44100
tSamFreq[ 5] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0126 1x 294 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioStreaming Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 2 Decoded PCM samples
wLockDelay 0x0000
Since commit
3e4f8e21c4f2 ("USB: core: fix check for duplicate
endpoints") USB core ignores any duplicate endpoints found during
descriptor parsing, but in this case we need to ignore the first
instance in order to avoid breaking the audio capture interface.
Fixes:
3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints")
Cc: stable <stable@vger.kernel.org>
Reported-by: edes <edes@gmx.net>
Tested-by: edes <edes@gmx.net>
Link: https://lore.kernel.org/r/20200201105829.5682c887@acme7.acmenet
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200203153830.26394-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 3 Feb 2020 15:38:28 +0000 (16:38 +0100)]
USB: core: add endpoint-blacklist quirk
commit
73f8bda9b5dc1c69df2bc55c0cbb24461a6391a9 upstream.
Add a new device quirk that can be used to blacklist endpoints.
Since commit
3e4f8e21c4f2 ("USB: core: fix check for duplicate
endpoints") USB core ignores any duplicate endpoints found during
descriptor parsing.
In order to handle devices where the first interfaces with duplicate
endpoints are the ones that should have their endpoints ignored, we need
to add a blacklist.
Tested-by: edes <edes@gmx.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200203153830.26394-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Chen [Fri, 15 Nov 2019 16:50:00 +0000 (18:50 +0200)]
usb: host: xhci: update event ring dequeue pointer on purpose
commit
dc0ffbea5729a3abafa577ebfce87f18b79e294b upstream.
On some situations, the software handles TRB events slower
than adding TRBs, then xhci_handle_event can't return zero
long time, the xHC will consider the event ring is full,
and trigger "Event Ring Full" error, but in fact, the software
has already finished lots of events, just no chance to
update ERDP (event ring dequeue pointer).
In this commit, we force update ERDP if half of TRBS_PER_SEGMENT
events have handled to avoid "Event Ring Full" error.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1573836603-10871-2-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Tue, 11 Feb 2020 15:01:58 +0000 (17:01 +0200)]
xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2
commit
cf0ee7c60c89641f6e4d1d3c7867fe32b9e30300 upstream.
xhci driver assumed that xHC controllers have at most one custom
supported speed table (PSI) for all usb 3.x ports.
Memory was allocated for one PSI table under the xhci hub structure.
Turns out this is not the case, some controllers have a separate
"supported protocol capability" entry with a PSI table for each port.
This means each usb3 roothub port can in theory support different custom
speeds.
To solve this, cache all supported protocol capabilities with their PSI
tables in an array, and add pointers to the xhci port structure so that
every port points to its capability entry in the array.
When creating the SuperSpeedPlus USB Device Capability BOS descriptor
for the xhci USB 3.1 roothub we for now will use only data from the
first USB 3.1 capable protocol capability entry in the array.
This could be improved later, this patch focuses resolving
the memory leak.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com>
Fixes:
47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
Cc: stable <stable@vger.kernel.org> # v4.4+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200211150158.14475-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Mon, 10 Feb 2020 13:45:52 +0000 (15:45 +0200)]
xhci: fix runtime pm enabling for quirky Intel hosts
commit
024d411e9c5d49eb96c825af52a3ce2682895676 upstream.
Intel hosts that need the XHCI_PME_STUCK_QUIRK flag should enable
runtime pm by calling xhci_pme_acpi_rtd3_enable() before
usb_hcd_pci_probe() calls pci_dev_run_wake().
Otherwise usage count for the device won't be decreased, and runtime
suspend is prevented.
usb_hcd_pci_probe() only decreases the usage count if device can
generate run-time wake-up events, i.e. when pci_dev_run_wake()
returns true.
This issue was exposed by pci_dev_run_wake() change in
commit
8feaec33b986 ("PCI / PM: Always check PME wakeup capability for
runtime wakeup support")
and should be backported to kernels with that change
Cc: <stable@vger.kernel.org> # 4.13+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200210134553.9144-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Mon, 10 Feb 2020 13:45:50 +0000 (15:45 +0200)]
xhci: Force Maximum Packet size for Full-speed bulk devices to valid range.
commit
f148b9f402ef002b57bcff3964d45abc8ffb6c3f upstream.
A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum
Packet Size of 4 causes a xHC "Parameter Error" at enumeration.
This is because valid Maximum packet sizes for Full-speed bulk endpoints
are 8, 16, 32 and 64 bytes. Hosts are not required to support other values
than these. See usb 2 specs section 5.8.3 for details.
The device starts working after forcing the maximum packet size to 8.
This is most likely the case with other devices as well, so force the
maximum packet size to a valid range.
Cc: stable@vger.kernel.org
Reported-by: Rene D Obermueller <cmdrrdo@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 4 Feb 2020 19:34:02 +0000 (19:34 +0000)]
staging: vt6656: fix sign of rx_dbm to bb_pre_ed_rssi.
commit
93134df520f23f4e9998c425b8987edca7016817 upstream.
bb_pre_ed_rssi is an u8 rx_dm always returns negative signed
values add minus operator to always yield positive.
fixes issue where rx sensitivity is always set to maximum because
the unsigned numbers were always greater then 100.
Fixes:
63b9907f58f1 ("staging: vt6656: mac80211 conversion: create rx function.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/aceac98c-6e69-3ce1-dfec-2bf27b980221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suren Baghdasaryan [Mon, 27 Jan 2020 23:56:16 +0000 (15:56 -0800)]
staging: android: ashmem: Disallow ashmem memory from being remapped
commit
6d67b0290b4b84c477e6a2fc6e005e174d3c7786 upstream.
When ashmem file is mmapped, the resulting vma->vm_file points to the
backing shmem file with the generic fops that do not check ashmem
permissions like fops of ashmem do. If an mremap is done on the ashmem
region, then the permission checks will be skipped. Fix that by disallowing
mapping operation on the backing shmem file.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: stable <stable@vger.kernel.org> # 4.4,4.9,4.14,4.18,5.4
Signed-off-by: Todd Kjos <tkjos@google.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20200127235616.48920-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 10 Feb 2020 19:07:21 +0000 (11:07 -0800)]
vt: vt_ioctl: fix race in VT_RESIZEX
commit
6cd1ed50efd88261298577cd92a14f2768eddeeb upstream.
We need to make sure vc_cons[i].d is not NULL after grabbing
console_lock(), or risk a crash.
general protection fault, probably for non-canonical address 0xdffffc0000000068: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000340-0x0000000000000347]
CPU: 1 PID: 19462 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883
Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40
RSP: 0018:
ffffc900086d7bb0 EFLAGS:
00010202
RAX:
0000000000000000 RBX:
ffffffff8c34ee88 RCX:
ffffc9001415c000
RDX:
0000000000000068 RSI:
ffffffff83f0e6e3 RDI:
0000000000000340
RBP:
ffffc900086d7cd0 R08:
ffff888054ce0100 R09:
fffffbfff16a2f6d
R10:
ffff888054ce0998 R11:
ffff888054ce0100 R12:
000000000000001d
R13:
dffffc0000000000 R14:
1ffff920010daf79 R15:
000000000000ff7f
FS:
00007f7d13c12700(0000) GS:
ffff8880ae900000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffd477e3c38 CR3:
0000000095d0a000 CR4:
00000000001406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
tty_ioctl+0xa37/0x14f0 drivers/tty/tty_io.c:2660
vfs_ioctl fs/ioctl.c:47 [inline]
ksys_ioctl+0x123/0x180 fs/ioctl.c:763
__do_sys_ioctl fs/ioctl.c:772 [inline]
__se_sys_ioctl fs/ioctl.c:770 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x45b399
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f7d13c11c78 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
00007f7d13c126d4 RCX:
000000000045b399
RDX:
0000000020000080 RSI:
000000000000560a RDI:
0000000000000003
RBP:
000000000075bf20 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
0000000000000666 R14:
00000000004c7f04 R15:
000000000075bf2c
Modules linked in:
---[ end trace
80970faf7a67eb77 ]---
RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883
Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40
RSP: 0018:
ffffc900086d7bb0 EFLAGS:
00010202
RAX:
0000000000000000 RBX:
ffffffff8c34ee88 RCX:
ffffc9001415c000
RDX:
0000000000000068 RSI:
ffffffff83f0e6e3 RDI:
0000000000000340
RBP:
ffffc900086d7cd0 R08:
ffff888054ce0100 R09:
fffffbfff16a2f6d
R10:
ffff888054ce0998 R11:
ffff888054ce0100 R12:
000000000000001d
R13:
dffffc0000000000 R14:
1ffff920010daf79 R15:
000000000000ff7f
FS:
00007f7d13c12700(0000) GS:
ffff8880ae900000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffd477e3c38 CR3:
0000000095d0a000 CR4:
00000000001406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20200210190721.200418-1-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Slaby [Mon, 10 Feb 2020 08:11:30 +0000 (09:11 +0100)]
vt: selection, handle pending signals in paste_selection
commit
687bff0cd08f790d540cfb7b2349f0d876cdddec upstream.
When pasting a selection to a vt, the task is set as INTERRUPTIBLE while
waiting for a tty to unthrottle. But signals are not handled at all.
Normally, this is not a problem as tty_ldisc_receive_buf receives all
the goods and a user has no reason to interrupt the task.
There are two scenarios where this matters:
1) when the tty is throttled and a signal is sent to the process, it
spins on a CPU until the tty is unthrottled. schedule() does not
really echedule, but returns immediately, of course.
2) when the sel_buffer becomes invalid, KASAN prevents any reads from it
and the loop simply does not proceed and spins forever (causing the
tty to throttle, but the code never sleeps, the same as above). This
sometimes happens as there is a race in the sel_buffer handling code.
So add signal handling to this ioctl (TIOCL_PASTESEL) and return -EINTR
in case a signal is pending.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200210081131.23572-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Pitre [Tue, 28 Jan 2020 17:50:33 +0000 (12:50 -0500)]
vt: fix scrollback flushing on background consoles
commit
3f4ef485be9d54040b695f32ec76d0f1ea50bbf3 upstream.
Commit
a6dbe4427559 ("vt: perform safe console erase in the right
order") provided fixes to an earlier commit by gathering all console
scrollback flushing operations in a function of its own. This includes
the invocation of vc_sw->con_switch() as previously done through a
update_screen() call. That commit failed to carry over the
con_is_visible() conditional though, as well as cursor handling, which
caused problems when "\e[3J" was written to a background console.
One could argue for preserving the call to update_screen(). However
this does far more than we need, and it is best to remove scrollback
assumptions from it. Instead let's gather the minimum needed to actually
perform scrollback flushing properly in that one place.
While at it, let's document the vc_sw->con_switch() side effect being
relied upon.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reported-and-tested-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2001281205560.1655@knanqh.ubzr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Fri, 21 Feb 2020 20:43:35 +0000 (12:43 -0800)]
floppy: check FDC index for errors before assigning it
commit
2e90ca68b0d2f5548804f22f0dd61145516171e3 upstream.
Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in
wait_til_ready().
Which on the face of it can't happen, since as Willy Tarreau points out,
the function does no particular memory access. Except through the FDCS
macro, which just indexes a static allocation through teh current fdc,
which is always checked against N_FDC.
Except the checking happens after we've already assigned the value.
The floppy driver is a disgrace (a lot of it going back to my original
horrd "design"), and has no real maintainer. Nobody has the hardware,
and nobody really cares. But it still gets used in virtual environment
because it's one of those things that everybody supports.
The whole thing should be re-written, or at least parts of it should be
seriously cleaned up. The 'current fdc' index, which is used by the
FDCS macro, and which is often shadowed by a local 'fdc' variable, is a
prime example of how not to write code.
But because nobody has the hardware or the motivation, let's just fix up
the immediate problem with a nasty band-aid: test the fdc index before
actually assigning it to the static 'fdc' variable.
Reported-by: Jordy Zomer <jordy@simplyhacker.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 14 Feb 2020 16:11:48 +0000 (08:11 -0800)]
USB: misc: iowarrior: add support for the 100 device
commit
bab5417f5f0118ce914bc5b2f8381e959e891155 upstream.
Add a new device id for the 100 devie. It has 4 interfaces like the 28
and 28L devices but a larger endpoint so more I/O pins.
Cc: Christoph Jung <jung@codemercs.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200214161148.GA3963518@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 12 Feb 2020 04:04:22 +0000 (20:04 -0800)]
USB: misc: iowarrior: add support for the 28 and 28L devices
commit
5f6f8da2d7b5a431d3f391d0d73ace8edfb42af7 upstream.
Add new device ids for the 28 and 28L devices. These have 4 interfaces
instead of 2, but the driver binds the same, so the driver changes are
minimal.
Cc: Christoph Jung <jung@codemercs.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212040422.2991-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 12 Feb 2020 04:04:21 +0000 (20:04 -0800)]
USB: misc: iowarrior: add support for 2 OEMed devices
commit
461d8deb26a7d70254bc0391feb4fd8a95e674e8 upstream.
Add support for two OEM devices that are identical to existing
IO-Warrior devices, except for the USB device id.
Cc: Christoph Jung <jung@codemercs.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212040422.2991-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Thu, 13 Feb 2020 09:56:04 +0000 (12:56 +0300)]
thunderbolt: Prevent crash if non-active NVMem file is read
commit
03cd45d2e219301880cabc357e3cf478a500080f upstream.
The driver does not populate .reg_read callback for the non-active NVMem
because the file is supposed to be write-only. However, it turns out
NVMem subsystem does not yet support this and expects that the .reg_read
callback is provided. If user reads the binary attribute it triggers
NULL pointer dereference like this one:
BUG: kernel NULL pointer dereference, address:
0000000000000000
...
Call Trace:
bin_attr_nvmem_read+0x64/0x80
kernfs_fop_read+0xa7/0x180
vfs_read+0xbd/0x170
ksys_read+0x5a/0xd0
do_syscall_64+0x43/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this in the driver by providing .reg_read callback that always
returns an error.
Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Fixes:
e6b245ccd524 ("thunderbolt: Add support for host and device NVM firmware upgrade")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200213095604.1074-1-mika.westerberg@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenwen Wang [Tue, 20 Aug 2019 05:33:54 +0000 (00:33 -0500)]
ecryptfs: fix a memory leak bug in ecryptfs_init_messaging()
commit
b4a81b87a4cfe2bb26a4a943b748d96a43ef20e8 upstream.
In ecryptfs_init_messaging(), if the allocation for 'ecryptfs_msg_ctx_arr'
fails, the previously allocated 'ecryptfs_daemon_hash' is not deallocated,
leading to a memory leak bug. To fix this issue, free
'ecryptfs_daemon_hash' before returning the error.
Cc: stable@vger.kernel.org
Fixes:
88b4a07e6610 ("[PATCH] eCryptfs: Public key transport mechanism")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenwen Wang [Tue, 20 Aug 2019 05:16:40 +0000 (00:16 -0500)]
ecryptfs: fix a memory leak bug in parse_tag_1_packet()
commit
fe2e082f5da5b4a0a92ae32978f81507ef37ec66 upstream.
In parse_tag_1_packet(), if tag 1 packet contains a key larger than
ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES, no cleanup is executed, leading to a
memory leak on the allocated 'auth_tok_list_item'. To fix this issue, go to
the label 'out_free' to perform the cleanup work.
Cc: stable@vger.kernel.org
Fixes:
dddfa461fc89 ("[PATCH] eCryptfs: Public key; packet management")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Holland [Mon, 17 Feb 2020 06:42:22 +0000 (00:42 -0600)]
ASoC: sun8i-codec: Fix setting DAI data format
commit
96781fd941b39e1f78098009344ebcd7af861c67 upstream.
Use the correct mask for this two-bit field. This fixes setting the DAI
data format to RIGHT_J or DSP_A.
Fixes:
36c684936fae ("ASoC: Add sun8i digital audio codec")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200217064250.15516-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 18 Feb 2020 08:09:15 +0000 (09:09 +0100)]
ALSA: hda/realtek - Apply quirk for yet another MSI laptop
commit
cc5049ae4d457194796f854eb2e38b9727ad8c2d upstream.
MSI GP65 laptop with SSID 1462:1293 requires the same quirk as other
MSI models.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204159
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200218080915.3433-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 17 Feb 2020 15:19:47 +0000 (16:19 +0100)]
ALSA: hda/realtek - Apply quirk for MSI GP63, too
commit
a655e2b107d463ce2745188ce050d07daed09a71 upstream.
The same quirk that was applied to MSI GL73 is needed for MSI GP63,
too. Adding the entry with the SSID 1462:1228.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206503
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200217151947.17528-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 18 Feb 2020 09:14:09 +0000 (10:14 +0100)]
ALSA: hda: Use scnprintf() for printing texts for sysfs/procfs
commit
44eeb081b8630bb3ad3cd381d1ae1831463e48bb upstream.
Some code in HD-audio driver calls snprintf() in a loop and still
expects that the return value were actually written size, while
snprintf() returns the expected would-be length instead. When the
given buffer limit were small, this leads to a buffer overflow.
Use scnprintf() for addressing those issues. It returns the actually
written size unlike snprintf().
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200218091409.27162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Tue, 18 Feb 2020 18:12:41 +0000 (18:12 +0000)]
iommu/qcom: Fix bogus detach logic
commit
faf305c51aeabd1ea2d7131e798ef5f55f4a7750 upstream.
Currently, the implementation of qcom_iommu_domain_free() is guaranteed
to do one of two things: WARN() and leak everything, or dereference NULL
and crash. That alone is terrible, but in fact the whole idea of trying
to track the liveness of a domain via the qcom_domain->iommu pointer as
a sanity check is full of fundamentally flawed assumptions. Make things
robust and actually functional by not trying to be quite so clever.
Reported-by: Brian Masney <masneyb@onstation.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes:
0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 24 Feb 2020 07:34:54 +0000 (08:34 +0100)]
Linux 4.19.106
Alex Deucher [Tue, 28 Jan 2020 19:39:45 +0000 (14:39 -0500)]
drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2)
[ Upstream commit
c37243579d6c881c575dcfb54cf31c9ded88f946 ]
We might get different numbers of clocks from powerplay depending
on what the OEM has populated.
v2: add assert for at least one level
Bug: https://gitlab.freedesktop.org/drm/amd/issues/963
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ido Schimmel [Fri, 7 Feb 2020 17:26:28 +0000 (19:26 +0200)]
mlxsw: spectrum_dpipe: Add missing error path
[ Upstream commit
3a99cbb6fa7bca1995586ec2dc21b0368aad4937 ]
In case devlink_dpipe_entry_ctx_prepare() failed, release RTNL that was
previously taken and free the memory allocated by
mlxsw_sp_erif_entry_prepare().
Fixes:
2ba5999f009d ("mlxsw: spectrum: Add Support for erif table entries access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael S. Tsirkin [Thu, 6 Feb 2020 07:40:58 +0000 (02:40 -0500)]
virtio_balloon: prevent pfn array overflow
[ Upstream commit
6e9826e77249355c09db6ba41cd3f84e89f4b614 ]
Make sure, at build time, that pfn array is big enough to hold a single
page. It happens to be true since the PAGE_SHIFT value at the moment is
20, which is 1M - exactly 256 4K balloon pages.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steve French [Wed, 5 Feb 2020 22:52:11 +0000 (16:52 -0600)]
cifs: log warning message (once) if out of disk space
[ Upstream commit
d6fd41905ec577851734623fb905b1763801f5ef ]
We ran into a confusing problem where an application wasn't checking
return code on close and so user didn't realize that the application
ran out of disk space. log a warning message (once) in these
cases. For example:
[ 8407.391909] Out of space writing to \\oleg-server\small-share
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Oleg Kravtsov <oleg@tuxera.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Averin [Fri, 24 Jan 2020 06:10:47 +0000 (09:10 +0300)]
help_next should increase position index
[ Upstream commit
9f198a2ac543eaaf47be275531ad5cbd50db3edf ]
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenwen Wang [Mon, 3 Feb 2020 03:47:53 +0000 (03:47 +0000)]
NFS: Fix memory leaks
[ Upstream commit
123c23c6a7b7ecd2a3d6060bea1d94019f71fd66 ]
In _nfs42_proc_copy(), 'res->commit_res.verf' is allocated through
kzalloc() if 'args->sync' is true. In the following code, if
'res->synchronous' is false, handle_async_copy() will be invoked. If an
error occurs during the invocation, the following code will not be executed
and the error will be returned . However, the allocated
'res->commit_res.verf' is not deallocated, leading to a memory leak. This
is also true if the invocation of process_copy_commit() returns an error.
To fix the above leaks, redirect the execution to the 'out' label if an
error is encountered.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Wed, 29 Jan 2020 17:42:57 +0000 (12:42 -0500)]
drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltage
[ Upstream commit
1064ad4aeef94f51ca230ac639a9e996fb7867a0 ]
Cull out 0 clocks to avoid a warning in DC.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/963
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Tue, 28 Jan 2020 18:19:51 +0000 (13:19 -0500)]
drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latency
[ Upstream commit
4d0a72b66065dd7e274bad6aa450196d42fd8f84 ]
Only send non-0 clocks to DC for validation. This mirrors
what the windows driver does.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/963
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhiqiang Liu [Tue, 4 Feb 2020 11:30:20 +0000 (19:30 +0800)]
brd: check and limit max_part par
[ Upstream commit
c8ab422553c81a0eb070329c63725df1cd1425bc ]
In brd_init func, rd_nr num of brd_device are firstly allocated
and add in brd_devices, then brd_devices are traversed to add each
brd_device by calling add_disk func. When allocating brd_device,
the disk->first_minor is set to i * max_part, if rd_nr * max_part
is larger than MINORMASK, two different brd_device may have the same
devt, then only one of them can be successfully added.
when rmmod brd.ko, it will cause oops when calling brd_exit.
Follow those steps:
# modprobe brd rd_nr=3 rd_size=102400 max_part=1048576
# rmmod brd
then, the oops will appear.
Oops log:
[ 726.613722] Call trace:
[ 726.614175] kernfs_find_ns+0x24/0x130
[ 726.614852] kernfs_find_and_get_ns+0x44/0x68
[ 726.615749] sysfs_remove_group+0x38/0xb0
[ 726.616520] blk_trace_remove_sysfs+0x1c/0x28
[ 726.617320] blk_unregister_queue+0x98/0x100
[ 726.618105] del_gendisk+0x144/0x2b8
[ 726.618759] brd_exit+0x68/0x560 [brd]
[ 726.619501] __arm64_sys_delete_module+0x19c/0x2a0
[ 726.620384] el0_svc_common+0x78/0x130
[ 726.621057] el0_svc_handler+0x38/0x78
[ 726.621738] el0_svc+0x8/0xc
[ 726.622259] Code:
aa0203f6 aa0103f7 aa1e03e0 d503201f (
7940e260)
Here, we add brd_check_and_reset_par func to check and limit max_part par.
--
V5->V6:
- remove useless code
V4->V5:(suggested by Ming Lei)
- make sure max_part is not larger than DISK_MAX_PARTS
V3->V4:(suggested by Ming Lei)
- remove useless change
- add one limit of max_part
V2->V3: (suggested by Ming Lei)
- clear .minors when running out of consecutive minor space in brd_alloc
- remove limit of rd_nr
V1->V2:
- add more checks in brd_check_par_valid as suggested by Ming Lei.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shubhrajyoti Datta [Sat, 11 Jan 2020 13:14:34 +0000 (18:44 +0530)]
microblaze: Prevent the overflow of the start
[ Upstream commit
061d2c1d593076424c910cb1b64ecdb5c9a6923f ]
In case the start + cache size is more than the max int the
start overflows.
Prevent the same.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrei Otcheretianski [Fri, 31 Jan 2020 13:45:24 +0000 (15:45 +0200)]
iwlwifi: mvm: Fix thermal zone registration
[ Upstream commit
baa6cf8450b72dcab11f37c47efce7c5b9b8ad0f ]
Use a unique name when registering a thermal zone. Otherwise, with
multiple NICS, we hit the following warning during the unregistration.
WARNING: CPU: 2 PID: 3525 at fs/sysfs/group.c:255
RIP: 0010:sysfs_remove_group+0x80/0x90
Call Trace:
dpm_sysfs_remove+0x57/0x60
device_del+0x5a/0x350
? sscanf+0x4e/0x70
device_unregister+0x1a/0x60
hwmon_device_unregister+0x4a/0xa0
thermal_remove_hwmon_sysfs+0x175/0x1d0
thermal_zone_device_unregister+0x188/0x1e0
iwl_mvm_thermal_exit+0xe7/0x100 [iwlmvm]
iwl_op_mode_mvm_stop+0x27/0x180 [iwlmvm]
_iwl_op_mode_stop.isra.3+0x2b/0x50 [iwlwifi]
iwl_opmode_deregister+0x90/0xa0 [iwlwifi]
__exit_compat+0x10/0x2c7 [iwlmvm]
__x64_sys_delete_module+0x13f/0x270
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zenghui Yu [Mon, 2 Dec 2019 07:10:21 +0000 (15:10 +0800)]
irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL
[ Upstream commit
107945227ac5d4c37911c7841b27c64b489ce9a9 ]
It looks like an obvious mistake to use its_mapc_cmd descriptor when
building the INVALL command block. It so far worked by luck because
both its_mapc_cmd.col and its_invall_cmd.col sit at the same offset of
the ITS command descriptor, but we should not rely on it.
Fixes:
cc2d3216f53c ("irqchip: GICv3: ITS command queue")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191202071021.1251-1-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coly Li [Sat, 1 Feb 2020 14:42:32 +0000 (22:42 +0800)]
bcache: explicity type cast in bset_bkey_last()
[ Upstream commit
7c02b0055f774ed9afb6e1c7724f33bf148ffdc0 ]
In bset.h, macro bset_bkey_last() is defined as,
bkey_idx((struct bkey *) (i)->d, (i)->keys)
Parameter i can be variable type of data structure, the macro always
works once the type of struct i has member 'd' and 'keys'.
bset_bkey_last() is also used in macro csum_set() to calculate the
checksum of a on-disk data structure. When csum_set() is used to
calculate checksum of on-disk bcache super block, the parameter 'i'
data type is struct cache_sb_disk. Inside struct cache_sb_disk (also in
struct cache_sb) the member keys is __u16 type. But bkey_idx() expects
unsigned int (a 32bit width), so there is problem when sending
parameters via stack to call bkey_idx().
Sparse tool from Intel 0day kbuild system reports this incompatible
problem. bkey_idx() is part of user space API, so the simplest fix is
to cast the (i)->keys to unsigned int type in macro bset_bkey_last().
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yunfeng Ye [Fri, 31 Jan 2020 06:17:26 +0000 (22:17 -0800)]
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
[ Upstream commit
aacee5446a2a1aa35d0a49dab289552578657fb4 ]
The variable inode may be NULL in reiserfs_insert_item(), but there is
no check before accessing the member of inode.
Fix this by adding NULL pointer check before calling reiserfs_debug().
Link: http://lkml.kernel.org/r/79c5135d-ff25-1cc9-4e99-9f572b88cc00@huawei.com
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Fri, 31 Jan 2020 06:16:37 +0000 (22:16 -0800)]
lib/scatterlist.c: adjust indentation in __sg_alloc_table
[ Upstream commit
4e456fee215677584cafa7f67298a76917e89c64 ]
Clang warns:
../lib/scatterlist.c:314:5: warning: misleading indentation; statement
is not part of the previous 'if' [-Wmisleading-indentation]
return -ENOMEM;
^
../lib/scatterlist.c:311:4: note: previous statement is here
if (prv)
^
1 warning generated.
This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Link: http://lkml.kernel.org/r/20191218033606.11942-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/830
Fixes:
edce6820a9fd ("scatterlist: prevent invalid free when alloc fails")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wangyan [Fri, 31 Jan 2020 06:11:50 +0000 (22:11 -0800)]
ocfs2: fix a NULL pointer dereference when call ocfs2_update_inode_fsync_trans()
[ Upstream commit
9f16ca48fc818a17de8be1f75d08e7f4addc4497 ]
I found a NULL pointer dereference in ocfs2_update_inode_fsync_trans(),
handle->h_transaction may be NULL in this situation:
ocfs2_file_write_iter
->__generic_file_write_iter
->generic_perform_write
->ocfs2_write_begin
->ocfs2_write_begin_nolock
->ocfs2_write_cluster_by_desc
->ocfs2_write_cluster
->ocfs2_mark_extent_written
->ocfs2_change_extent_flag
->ocfs2_split_extent
->ocfs2_try_to_merge_extent
->ocfs2_extend_rotate_transaction
->ocfs2_extend_trans
->jbd2_journal_restart
->jbd2__journal_restart
// handle->h_transaction is NULL here
->handle->h_transaction = NULL;
->start_this_handle
/* journal aborted due to storage
network disconnection, return error */
->return -EROFS;
/* line 3806 in ocfs2_try_to_merge_extent (),
it will ignore ret error. */
->ret = 0;
->...
->ocfs2_write_end
->ocfs2_write_end_nolock
->ocfs2_update_inode_fsync_trans
// NULL pointer dereference
->oi->i_sync_tid = handle->h_transaction->t_tid;
The information of NULL pointer dereference as follows:
JBD2: Detected IO errors while flushing file data on dm-11-45
Aborting journal on device dm-11-45.
JBD2: Error -5 detected when updating journal superblock for dm-11-45.
(dd,22081,3):ocfs2_extend_trans:474 ERROR: status = -30
(dd,22081,3):ocfs2_try_to_merge_extent:3877 ERROR: status = -30
Unable to handle kernel NULL pointer dereference at
virtual address
0000000000000008
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp =
00000000e74e1338
[
0000000000000008] pgd=
0000000000000000
Internal error: Oops:
96000004 [#1] SMP
Process dd (pid: 22081, stack limit = 0x00000000584f35a9)
CPU: 3 PID: 22081 Comm: dd Kdump: loaded
Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019
pstate:
60400009 (nZCv daif +PAN -UAO)
pc : ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2]
lr : ocfs2_write_end_nolock+0x2a0/0x550 [ocfs2]
sp :
ffff0000459fba70
x29:
ffff0000459fba70 x28:
0000000000000000
x27:
ffff807ccf7f1000 x26:
0000000000000001
x25:
ffff807bdff57970 x24:
ffff807caf1d4000
x23:
ffff807cc79e9000 x22:
0000000000001000
x21:
000000006c6cd000 x20:
ffff0000091d9000
x19:
ffff807ccb239db0 x18:
ffffffffffffffff
x17:
000000000000000e x16:
0000000000000007
x15:
ffff807c5e15bd78 x14:
0000000000000000
x13:
0000000000000000 x12:
0000000000000000
x11:
0000000000000000 x10:
0000000000000001
x9 :
0000000000000228 x8 :
000000000000000c
x7 :
0000000000000fff x6 :
ffff807a308ed6b0
x5 :
ffff7e01f10967c0 x4 :
0000000000000018
x3 :
d0bc661572445600 x2 :
0000000000000000
x1 :
000000001b2e0200 x0 :
0000000000000000
Call trace:
ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2]
ocfs2_write_end+0x4c/0x80 [ocfs2]
generic_perform_write+0x108/0x1a8
__generic_file_write_iter+0x158/0x1c8
ocfs2_file_write_iter+0x668/0x950 [ocfs2]
__vfs_write+0x11c/0x190
vfs_write+0xac/0x1c0
ksys_write+0x6c/0xd8
__arm64_sys_write+0x24/0x30
el0_svc_common+0x78/0x130
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
To prevent NULL pointer dereference in this situation, we use
is_handle_aborted() before using handle->h_transaction->t_tid.
Link: http://lkml.kernel.org/r/03e750ab-9ade-83aa-b000-b9e81e34e539@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Vetter [Tue, 28 Jan 2020 16:09:52 +0000 (17:09 +0100)]
radeon: insert 10ms sleep in dce5_crtc_load_lut
[ Upstream commit
ec3d65082d7dabad6fa8f66a8ef166f2d522d6b2 ]
Per at least one tester this is enough magic to recover the regression
introduced for some people (but not all) in
commit
b8e2b0199cc377617dc238f5106352c06dcd3fa2
Author: Peter Rosin <peda@axentia.se>
Date: Tue Jul 4 12:36:57 2017 +0200
drm/fb-helper: factor out pseudo-palette
which for radeon had the side-effect of refactoring out a seemingly
redudant writing of the color palette.
10ms in a fairly slow modeset path feels like an acceptable form of
duct-tape, so maybe worth a shot and see what sticks.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Averin [Fri, 24 Jan 2020 07:03:06 +0000 (10:03 +0300)]
trigger_next should increase position index
[ Upstream commit
6722b23e7a2ace078344064a9735fb73e554e9ef ]
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
Without patch:
# dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger
dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset
n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
# Available triggers:
# traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
6+1 records in
6+1 records out
206 bytes copied, 0.
00027916 s, 738 kB/s
Notice the printing of "# Available triggers:..." after the line.
With the patch:
# dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger
dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset
n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
2+1 records in
2+1 records out
88 bytes copied, 0.
000526867 s, 167 kB/s
It only prints the end of the file, and does not restart.
Link: http://lkml.kernel.org/r/3c35ee24-dd3a-8119-9c19-552ed253388a@virtuozzo.com
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Averin [Fri, 24 Jan 2020 07:02:56 +0000 (10:02 +0300)]
ftrace: fpid_next() should increase position index
[ Upstream commit
e4075e8bdffd93a9b6d6e1d52fabedceeca5a91b ]
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
Without patch:
# dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid
dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset
id
no pid
2+1 records in
2+1 records out
10 bytes copied, 0.
000213285 s, 46.9 kB/s
Notice the "id" followed by "no pid".
With the patch:
# dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid
dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset
id
0+1 records in
0+1 records out
3 bytes copied, 0.
000202112 s, 14.8 kB/s
Notice that it only prints "id" and not the "no pid" afterward.
Link: http://lkml.kernel.org/r/4f87c6ad-f114-30bb-8506-c32274ce2992@virtuozzo.com
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Skeggs [Tue, 28 Jan 2020 04:39:26 +0000 (14:39 +1000)]
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
[ Upstream commit
0e6176c6d286316e9431b4f695940cfac4ffe6c2 ]
The implementations for most channel types contains a map of methods to
priv registers in order to provide debugging info when a disp exception
has been raised.
This info is missing from the implementation of PIO channels as they're
rather simplistic already, however, if an exception is raised by one of
them, we'd end up triggering a NULL-pointer deref. Not ideal...
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206299
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Zyngier [Mon, 16 Dec 2019 11:24:57 +0000 (11:24 +0000)]
irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
[ Upstream commit
926b5dfa6b8dc666ff398044af6906b156e1d949 ]
We currently allocate redistributor region structures for
individual redistributors when ACPI doesn't present us with
compact MMIO regions covering multiple redistributors.
It turns out that we allocate these structures even when
the redistributor is flagged as disabled by ACPI. It works
fine until someone actually tries to tarse one of these
structures, and access the corresponding MMIO region.
Instead, track the number of enabled redistributors, and
only allocate what is required. This makes sure that there
is no invalid data to misuse.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reported-by: Heyi Guo <guoheyi@huawei.com>
Tested-by: Heyi Guo <guoheyi@huawei.com>
Link: https://lore.kernel.org/r/20191216062745.63397-1-guoheyi@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 7 Jan 2020 21:01:04 +0000 (22:01 +0100)]
rbd: work around -Wuninitialized warning
[ Upstream commit
a55e601b2f02df5db7070e9a37bd655c9c576a52 ]
gcc -O3 warns about a dummy variable that is passed
down into rbd_img_fill_nodata without being initialized:
drivers/block/rbd.c: In function 'rbd_img_fill_nodata':
drivers/block/rbd.c:2573:13: error: 'dummy' is used uninitialized in this function [-Werror=uninitialized]
fctx->iter = *fctx->pos;
Since this is a dummy, I assume the warning is harmless, but
it's better to initialize it anyway and avoid the warning.
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiubo Li [Wed, 11 Dec 2019 01:29:40 +0000 (20:29 -0500)]
ceph: check availability of mds cluster on mount after wait timeout
[ Upstream commit
97820058fb2831a4b203981fa2566ceaaa396103 ]
If all the MDS daemons are down for some reason, then the first mount
attempt will fail with EIO after the mount request times out. A mount
attempt will also fail with EIO if all of the MDS's are laggy.
This patch changes the code to return -EHOSTUNREACH in these situations
and adds a pr_info error message to help the admin determine the cause.
URL: https://tracker.ceph.com/issues/4386
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Averin [Sat, 25 Jan 2020 09:10:02 +0000 (12:10 +0300)]
bpf: map_seq_next should always increase position index
[ Upstream commit
90435a7891a2259b0f74c5a1bc5600d0d64cba8f ]
If seq_file .next fuction does not change position index,
read after some lseek can generate an unexpected output.
See also: https://bugzilla.kernel.org/show_bug.cgi?id=206283
v1 -> v2: removed missed increment in end of function
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/eca84fdd-c374-a154-d874-6c7b55fc3bc4@virtuozzo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ronnie Sahlberg [Wed, 22 Jan 2020 01:07:56 +0000 (11:07 +1000)]
cifs: fix NULL dereference in match_prepath
[ Upstream commit
fe1292686333d1dadaf84091f585ee903b9ddb84 ]
RHBZ: 1760879
Fix an oops in match_prepath() by making sure that the prepath string is not
NULL before we pass it into strcmp().
This is similar to other checks we make for example in cifs_root_iget()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Sun, 26 Jan 2020 00:09:54 +0000 (00:09 +0000)]
iwlegacy: ensure loop counter addr does not wrap and cause an infinite loop
[ Upstream commit
c2f9a4e4a5abfc84c01b738496b3fd2d471e0b18 ]
The loop counter addr is a u16 where as the upper limit of the loop
is an int. In the unlikely event that the il->cfg->eeprom_size is
greater than 64K then we end up with an infinite loop since addr will
wrap around an never reach upper loop limit. Fix this by making addr
an int.
Addresses-Coverity: ("Infinite loop")
Fixes:
be663ab67077 ("iwlwifi: split the drivers for agn and legacy devices 3945/4965")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Wed, 18 Dec 2019 01:15:46 +0000 (18:15 -0700)]
hostap: Adjust indentation in prism2_hostapd_add_sta
[ Upstream commit
b61156fba74f659d0bc2de8f2dbf5bad9f4b8faf ]
Clang warns:
../drivers/net/wireless/intersil/hostap/hostap_ap.c:2511:3: warning:
misleading indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
if (sta->tx_supp_rates & WLAN_RATE_5M5)
^
../drivers/net/wireless/intersil/hostap/hostap_ap.c:2509:2: note:
previous statement is here
if (sta->tx_supp_rates & WLAN_RATE_2M)
^
1 warning generated.
This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Fixes:
ff1d2767d5a4 ("Add HostAP wireless driver.")
Link: https://github.com/ClangBuiltLinux/linux/issues/813
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincenzo Frascino [Fri, 10 Jan 2020 12:37:59 +0000 (13:37 +0100)]
ARM: 8951/1: Fix Kexec compilation issue.
[ Upstream commit
76950f7162cad51d2200ebd22c620c14af38f718 ]
To perform the reserve_crashkernel() operation kexec uses SECTION_SIZE to
find a memblock in a range.
SECTION_SIZE is not defined for nommu systems. Trying to compile kexec in
these conditions results in a build error:
linux/arch/arm/kernel/setup.c: In function ‘reserve_crashkernel’:
linux/arch/arm/kernel/setup.c:1016:25: error: ‘SECTION_SIZE’ undeclared
(first use in this function); did you mean ‘SECTIONS_WIDTH’?
crash_size, SECTION_SIZE);
^~~~~~~~~~~~
SECTIONS_WIDTH
linux/arch/arm/kernel/setup.c:1016:25: note: each undeclared identifier
is reported only once for each function it appears in
linux/scripts/Makefile.build:265: recipe for target 'arch/arm/kernel/setup.o'
failed
Make KEXEC depend on MMU to fix the compilation issue.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
zhangyi (F) [Wed, 4 Dec 2019 12:46:13 +0000 (20:46 +0800)]
jbd2: make sure ESHUTDOWN to be recorded in the journal superblock
[ Upstream commit
0e98c084a21177ef136149c6a293b3d1eb33ff92 ]
Commit
fb7c02445c49 ("ext4: pass -ESHUTDOWN code to jbd2 layer") want
to allow jbd2 layer to distinguish shutdown journal abort from other
error cases. So the ESHUTDOWN should be taken precedence over any other
errno which has already been recoded after EXT4_FLAGS_SHUTDOWN is set,
but it only update errno in the journal suoerblock now if the old errno
is 0.
Fixes:
fb7c02445c49 ("ext4: pass -ESHUTDOWN code to jbd2 layer")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
zhangyi (F) [Wed, 4 Dec 2019 12:46:11 +0000 (20:46 +0800)]
jbd2: switch to use jbd2_journal_abort() when failed to submit the commit record
[ Upstream commit
d0a186e0d3e7ac05cc77da7c157dae5aa59f95d9 ]
We invoke jbd2_journal_abort() to abort the journal and record errno
in the jbd2 superblock when committing journal transaction besides the
failure on submitting the commit record. But there is no need for the
case and we can also invoke jbd2_journal_abort() instead of
__jbd2_journal_abort_hard().
Fixes:
818d276ceb83a ("ext4: Add the journal checksum feature")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenz Bauer [Fri, 24 Jan 2020 11:27:54 +0000 (11:27 +0000)]
selftests: bpf: Reset global state between reuseport test runs
[ Upstream commit
51bad0f05616c43d6d34b0a19bcc9bdab8e8fb39 ]
Currently, there is a lot of false positives if a single reuseport test
fails. This is because expected_results and the result map are not cleared.
Zero both after individual test runs, which fixes the mentioned false
positives.
Fixes:
91134d849a0e ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-5-lmb@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lu Baolu [Thu, 16 Jan 2020 01:52:36 +0000 (09:52 +0800)]
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
[ Upstream commit
857f081426e5aa38313426c13373730f1345fe95 ]
Address field in device TLB invalidation descriptor is qualified
by the S field. If S field is zero, a single page at page address
specified by address [63:12] is requested to be invalidated. If S
field is set, the least significant bit in the address field with
value 0b (say bit N) indicates the invalidation address range. The
spec doesn't require the address [N - 1, 0] to be cleared, hence
remove the unnecessary WARN_ON_ONCE().
Otherwise, the caller might set "mask = MAX_AGAW_PFN_WIDTH" in order
to invalidating all the cached mappings on an endpoint, and below
overflow error will be triggered.
[...]
UBSAN: Undefined behaviour in drivers/iommu/dmar.c:1354:3
shift exponent 64 is too large for 64-bit type 'long long unsigned int'
[...]
Reported-and-tested-by: Frank <fgndev@posteo.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>