media: amphion: apply vb2_queue_error instead of setting manually

[ Upstream commit 9d175a81e28f260916a0a13f457dd8b940eafb4e ]

vb2_queue_error is help to set the error of vb2_queue,
don't need to set it manually

Fixes: 3cd084519c6f ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: add lock around vdec_g_fmt

[ Upstream commit 8480dd5fb3c82b5887d456b3fbe4201d99231814 ]

the capture format may be changed when
sequence header is parsed,
it may be read and write in the same time,
add lock around vdec_g_fmt to synchronize it

Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: do not overwrite mtu configuration running reset routine

[ Upstream commit b677d6c7a695dad1b02d2e0e428c39b3b344f270 ]

Restore user configured MTU running mtk_hw_init() during tx timeout routine
since it will be overwritten after a hw reset.

Reported-by: Felix Fietkau <nbd@nbd.name>
Fixes: 9ea4d311509f ("net: ethernet: mediatek: add the whole ethernet reset into the reset process")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: acp: Fix possible UAF in acp_dma_open

[ Upstream commit 3420fdb8ae99f0a08d78d2b80f42a71971cf478d ]

Smatch report warning as follows:

sound/soc/amd/acp/acp-platform.c:199 acp_dma_open() warn:
  '&stream->list' not removed from list

If snd_pcm_hw_constraint_integer() fails in acp_dma_open(),
stream will be freed, but stream->list will not be removed from
adata->stream_list, then list traversal may cause UAF.

Fix by adding the newly allocated stream to the list once it's fully
initialised.

Fixes: 7929985cfe36 ("ASoC: amd: acp: Initialize list to store acp_stream during pcm_open")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221118030056.3135960-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: elants_i2c - properly handle the reset GPIO when power is off

[ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ]

As can be seen in elants_i2c_power_off(), we want the reset GPIO
asserted when power is off. The reset GPIO is active low so we need
the reset line logic low when power is off to avoid leakage.

We have a problem, though, at probe time. At probe time we haven't
powered the regulators on yet but we have:

  devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);

While that _looks_ right, it turns out that it's not. The
GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the
GPIO to "not asserted". Since this is an active low GPIO that inits it
to be high.

Let's fix this to properly init the GPIO. Now after both probe and
power off the state of the GPIO is consistent (it's "asserted" or
level low).

Once we fix this, we can see that at power on time we no longer to
assert the reset GPIO as the first thing. The reset GPIO is _always_
asserted before powering on. Let's fix powering on to account for
this.

Fixes: afe10358e47a ("Input: elants_i2c - wire up regulator support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: lpddr2_nvm: Fix possible null-ptr-deref

[ Upstream commit 6bdd45d795adf9e73b38ced5e7f750cd199499ff ]

It will cause null-ptr-deref when resource_size(add_range) invoked,
if platform_get_resource() returns NULL.

Fixes: 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221114090240.244172-1-tanghui20@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a6xx: Fix speed-bin detection vs probe-defer

[ Upstream commit f6d1918794ef92b4e26b80c3d40365347b76b1fd ]

If we get an error (other than -ENOENT) we need to propagate that up the
stack.  Otherwise if the nvmem driver hasn't probed yet, we'll end up
end up claiming that we support all the OPPs which is not likely to be
true (and on some generations impossible to be true, ie. if there are
conflicting OPPs).

v2: Update commit msg, gc unused label, etc
v3: Add previously missing \n's

Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511690/
Link: https://lore.kernel.org/r/20221115154637.1613968-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath10k: Fix return value in ath10k_pci_init()

[ Upstream commit 2af7749047d8d6ad43feff69f555a13a6a6c2831 ]

This driver is attempting to register to support two different buses.
if either of these is successful then ath10k_pci_init() should return 0
so that hardware attached to the successful bus can be probed and
supported. only if both of these are unsuccessful should ath10k_pci_init()
return an errno.

Fixes: 0b523ced9a3c ("ath10k: add basic skeleton to support ahb")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221110061926.18163-1-xiujianfeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: fix memory leak of lsm_cgroup

[ Upstream commit c453e64cbc9532c0c2edfa999c35d29dad16b8bb ]

kmemleak reports this issue:

unreferenced object 0xffff88810b7835c0 (size 32):
  comm "test_progs", pid 270, jiffies 4294969007 (age 1621.315s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    03 00 00 00 03 00 00 00 0f 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000376cdeab>] kmalloc_trace+0x27/0x110
    [<000000003bcdb3b6>] selinux_sk_alloc_security+0x66/0x110
    [<000000003959008f>] security_sk_alloc+0x47/0x80
    [<00000000e7bc6668>] sk_prot_alloc+0xbd/0x1a0
    [<0000000002d6343a>] sk_alloc+0x3b/0x940
    [<000000009812a46d>] unix_create1+0x8f/0x3d0
    [<000000005ed0976b>] unix_create+0xa1/0x150
    [<0000000086a1d27f>] __sock_create+0x233/0x4a0
    [<00000000cffe3a73>] __sys_socket_create.part.0+0xaa/0x110
    [<0000000007c63f20>] __sys_socket+0x49/0xf0
    [<00000000b08753c8>] __x64_sys_socket+0x42/0x50
    [<00000000b56e26b3>] do_syscall_64+0x3b/0x90
    [<000000009b4871b8>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

The issue occurs in the following scenarios:

unix_create1()
  sk_alloc()
    sk_prot_alloc()
      security_sk_alloc()
        call_int_hook()
          hlist_for_each_entry()
            entry1->hook.sk_alloc_security
            <-- selinux_sk_alloc_security() succeeded,
            <-- sk->security alloced here.
            entry2->hook.sk_alloc_security
            <-- bpf_lsm_sk_alloc_security() failed
      goto out_free;
        ...    <-- the sk->security not freed, memleak

The core problem is that the LSM is not yet fully stacked (work is
actively going on in this space) which means that some LSM hooks do
not support multiple LSMs at the same time. To fix, skip the
"EPERM" test when it runs in the environments that already have
non-bpf lsms installed

Fixes: dca85aac8895 ("selftests/bpf: lsm_cgroup functional test")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Cc: Stanislav Fomichev <sdf@google.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/1668482980-16163-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm: track per-add_disk holder relations in DM

[ Upstream commit 1a581b72169968f4154b5793828f3bc28b258b35 ]

dm is a bit special in that it opens the underlying devices.  Commit
89f871af1b26 ("dm: delay registering the gendisk") tried to accommodate
that by allowing to add the holder to the list before add_gendisk and
then just add them to sysfs once add_disk is called.  But that leads to
really odd lifetime problems and error handling problems as we can't
know the state of the kobjects and don't unwind properly.  To fix this
switch to just registering all existing table_devices with the holder
code right after add_disk, and remove them before calling del_gendisk.

Fixes: 89f871af1b26 ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm: make sure create and remove dm device won't race with open and close table

[ Upstream commit d563792c8933a810d28ce0f2831f0726c2b15a31 ]

open_table_device() and close_table_device() is protected by
table_devices_lock, hence use it to protect add_disk() and
del_gendisk().

Prepare to track per-add_disk holder relations in dm.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1a581b721699 ("dm: track per-add_disk holder relations in DM")
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm: cleanup close_table_device

[ Upstream commit 7b5865831c1003122f737df5e16adaa583f1a595 ]

Take the list unlink and free into close_table_device so that no half
torn down table_devices exist.  Also remove the check for a NULL bdev
as that can't happen - open_table_device never adds a table_device to
the list that does not have a valid block_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1a581b721699 ("dm: track per-add_disk holder relations in DM")
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm: cleanup open_table_device

[ Upstream commit b9a785d2dc6567b2fd9fc60057a6a945a276927a ]

Move all the logic for allocation the table_device and linking it into
the list into the open_table_device.  This keeps the code tidy and
ensures that the table_devices only exist in fully initialized state.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1a581b721699 ("dm: track per-add_disk holder relations in DM")
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: clear ->slave_dir when dropping the main slave_dir reference

[ Upstream commit d90db3b1c8676bc88b4309c5a571333de2263b8e ]

Zero out the pointer to ->slave_dir so that the holder code doesn't
incorrectly treat the object as alive when add_disk failed or after
del_gendisk was called.

Fixes: 89f871af1b26 ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Fix misuse of dereference of pointer in template_desc_init_fields()

[ Upstream commit 25369175ce84813dd99d6604e710dc2491f68523 ]

The input parameter @fields is type of struct ima_template_field ***, so
when allocates array memory for @fields, the size of element should be
sizeof(**field) instead of sizeof(*field).

Actually the original code would not cause any runtime error, but it's
better to make it logically right.

Fixes: adf53a778a0a ("ima: new templates management mechanism")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

integrity: Fix memory leakage in keyring allocation error path

[ Upstream commit 39419ef7af0916cc3620ecf1ed42d29659109bf3 ]

Key restriction is allocated in integrity_init_keyring(). However, if
keyring allocation failed, it is not freed, causing memory leaks.

Fixes: 2b6aa412ff23 ("KEYS: Use structure to capture key restriction function and data")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: memalloc: Allocate more contiguous pages for fallback case

[ Upstream commit cc26516374065a34e10c9a8bf3e940e42cd96e2a ]

Currently the fallback SG allocation tries to allocate each single
page, and this tends to result in the reverse order of memory
addresses when large space is available at boot, as the kernel takes a
free page from the top to the bottom in the zone.  The end result
looks as if non-contiguous (although it actually is).  What's worse is
that it leads to an overflow of BDL entries for HD-audio.

For avoiding such a problem, this patch modifies the allocation code
slightly; now it tries to allocate the larger contiguous chunks as
much as possible, then reduces to the smaller chunks only if the
allocation failed -- a similar strategy as the existing
snd_dma_alloc_pages_fallback() function.

Along with the trick, drop the unused address array from
snd_dma_sg_fallback object.  It was needed in the past when
dma_alloc_coherent() was used, but with the standard page allocator,
it became superfluous and never referred.

Fixes: a8d302a0b770 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221114141658.29620-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/fourcc: Fix vsub/hsub for Q410 and Q401

[ Upstream commit b230555f3257f197dd98641ef6ebaf778b52dd51 ]

These formats are not subsampled, but that means hsub and vsub should be
1, not 0.

Fixes: 94b292b27734 ("drm: drm_fourcc: add NV15, Q410, Q401 YUV formats")
Reported-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913144306.17279-1-brian.starkey@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: qcom-rpmh: Fix PMR735a S3 regulator spec

[ Upstream commit dd801b2265c81bf0c8b0b4b8f7c1e7bfed078403 ]

PMR735a has a wider range than previously defined. Fix it.

Fixes: c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221110210706.80301-1-konrad.dybcio@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtw89: Fix some error handling path in rtw89_core_sta_assoc()

[ Upstream commit 81c0b8928437ddfe87b0024c5bd817bc331d8524 ]

'ret' is not updated after a function call in rtw89_core_sta_assoc().
This prevent error handling from working.

Add the missing assignment.

Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7b1d82594635e4406d3438f33d8da29eaa056c5a.1668354547.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: return err on nvme_init_non_mdts_limits fail

[ Upstream commit bcaf434b8f04e1ee82a8b1e1bce0de99fbff67fa ]

In nvme_init_non_mdts_limits function we were returning 0 when kzalloc
failed; it now returns -ENOMEM.

Fixes: 5befc7c26e5a ("nvme: implement non-mdts command limits")
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table()

[ Upstream commit d27252b5706e51188aed7647126e44dcf9e940c1 ]

In the PP_OD_EDIT_VDDC_CURVE case the "input_index" variable is capped at
2 but not checked for negative values so it results in an out of bounds
read.  This value comes from the user via sysfs.

Fixes: d5bf26539494 ("drm/amd/powerplay: added vega20 overdrive support V3")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()

[ Upstream commit f2b41b748c19962b82709d9f23c6b2b0ce9d2f91 ]

I got the the following report:

  OF: ERROR: memory leak, expected refcount 1 instead of 2,
  of_node_get()/of_node_put() unbalanced - destroy cset entry:
  attach overlay node /i2c/pmic@62/regulators/exten

In of_get_regulator(), the node is returned from of_parse_phandle()
with refcount incremented, after using it, of_node_put() need be called.

Fixes: 69511a452e6d ("regulator: map consumer regulator based on device tree")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221115091508.900752-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: only allocate a single slab for bvecs

[ Upstream commit fa8f9ac42350edd3ce82d0d148a60f0fa088f995 ]

There is no need to have a separate slab cache for each namespace,
and having separate ones creates duplicate debugs file names as well.

Fixes: d5eff33ee6f8 ("nvmet: add simple file backed ns support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: pxa: fix null-pointer dereference in filter()

[ Upstream commit ec7bf231aaa1bdbcb69d23bc50c753c80fb22429 ]

kasprintf() would return NULL pointer when kmalloc() fail to allocate.
Need to check the return pointer before calling strcmp().

Fixes: 7a824e214e25 ("ASoC: mmp: add audio dma support")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20221114085629.1910435-1-zengheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Modify dpi power on/off sequence.

[ Upstream commit ff446c0f6290185cefafe3b376bb86063a3a9f6a ]

Modify dpi power on/off sequence so that the first gpio operation will
take effect.

Fixes: 6bd4763fd532 ("drm/mediatek: set dpi pin mode to gpio low to avoid leakage current")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix incorrect ASSERT in the tcp_hdr_options test

[ Upstream commit 52929912d7bda040b43538e8d88e8d231b76eb4e ]

This patch fixes the incorrect ASSERT test in tcp_hdr_options during
the CHECK to ASSERT macro cleanup.

Fixes: 3082f8cd4ba3 ("selftests/bpf: Convert tcp_hdr_options test to ASSERT_* macros")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221107230420.4192307-3-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix xdp_synproxy compilation failure in 32-bit arch

[ Upstream commit e4c9cf0ce8c413c2030e8fb215551d7e0582ee7b ]

xdp_synproxy fails to be compiled in the 32-bit arch, log is as follows:

  xdp_synproxy.c: In function 'parse_options':
  xdp_synproxy.c:175:36: error: left shift count >= width of type [-Werror=shift-count-overflow]
    175 |                 *tcpipopts = (mss6 << 32) | (ttl << 24) | (wscale << 16) | mss4;
        |                                    ^~
  xdp_synproxy.c: In function 'syncookie_open_bpf_maps':
  xdp_synproxy.c:289:28: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
    289 |                 .map_ids = (__u64)map_ids,
        |                            ^

Fix it.

Fixes: fb5cd0ce70d4 ("selftests/bpf: Add selftests for raw syncookie helpers")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221111030836.37632-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: wsa883x: use correct header file

[ Upstream commit 5f52ceddc40cd61b1dd2ecf735624deaf05f779f ]

Fix build errors when GPIOLIB is not set/enabled:

../sound/soc/codecs/wsa883x.c: In function 'wsa883x_probe':
../sound/soc/codecs/wsa883x.c:1394:25: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
         wsa883x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown",
../sound/soc/codecs/wsa883x.c:1395:49: error: 'GPIOD_FLAGS_BIT_NONEXCLUSIVE' undeclared (first use in this function)
         GPIOD_FLAGS_BIT_NONEXCLUSIVE);
../sound/soc/codecs/wsa883x.c:1414:9: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration]
         gpiod_direction_output(wsa883x->sd_n, 1);

Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@quicinc.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221108001829.5100-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: wsa883x: Use proper shutdown GPIO polarity

[ Upstream commit ec5dba73f7ba10797904cf18092d2e6975a22147 ]

The shutdown GPIO is active low (SD_N), but this depends on actual board
layout.  Linux drivers should only care about logical state, where high
(1) means shutdown and low (0) means do not shutdown.

Invert the GPIO to match logical value.

Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221110133512.478831-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

module: Fix NULL vs IS_ERR checking for module_get_next_page

[ Upstream commit 45af1d7aae7d5520d2858f8517a1342646f015db ]

The module_get_next_page() function return error pointers on error
instead of NULL.
Use IS_ERR() to check the return value to fix this.

Fixes: b1ae6dc41eaa ("module: add in-kernel support for decompressing")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mei: fix potential NULL-ptr deref after clone

[ Upstream commit d3df49dda431f7ae4132a9a0ac25a5134c04e812 ]

If cloning the SKB fails, don't try to use it, but rather return
as if we should pass it.

Coverity CID: 1503456

Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221030191011.0ce03ba99601.I87960b7cb0a3d16b9fd8d9144027e7e2587f5a58@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mei: avoid blocking sap messages handling due to rtnl lock

[ Upstream commit d288067ede4b375e72daf7f9a98d937ede11a311 ]

The AMT_STATE sap message handler tries to take the rtnl lock.
This means that in case the rtnl lock is already taken, sap messages
will not be processed.
When an interface is brought up, the host requests ownership from
csme. However, since the rtnl lock is already held, if there is a
pending amt state message, the host will not be able to read the
ownership confirm message because the amt state message handler
is pending. As a result, the host fails to get ownership although
csme granted it.
Fix it by moving the part that needs the rtnl lock into a dedicated
worker, so handling sap messages can continue.

Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221030191011.8599f2b4e9dd.I518f79e9099bf815c5f8d90235b4ce3250f59970@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mei: fix tx DHCP packet for devices with new Tx API

[ Upstream commit bcd68b3dbe78b7b0f7b6b55162cf1eff1e7fff9e ]

Devices with new Tx API have the IV introduced by the HW and it is not
present in the skb at all. Hence we don't need to tell
iwl_mvm_mei_tx_copy_to_csme to jump over 8 bytes to get to the ethernet
header.

Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221030191011.12dc42133502.Idd744ffeeb84b880eb497963ee02563cbb959a42@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mei: don't send SAP commands if AMT is disabled

[ Upstream commit 95170a46b7dddbc3ac31b20ef2e8fa9d556d783d ]

We should not send any SAP command to CSME if AMT is disabled.

Reported-by: Toke Høiland-Jørgensen <toke@toke.dk>
Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221030191011.ea222d41c781.Ifc90ddc3e35187683ff7f59371d792b61c8854c8@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mei: make sure ownership confirmed message is sent

[ Upstream commit 5aa7ce31bd84c2f4f059200f06c537c920cbb458 ]

It is possible that CSME will try to take ownership while the driver
is stopping. In this case, if the CSME takes ownership message arrives
after the driver started unregistering, the iwl_mei_cache->ops is
already invalid, so the host will not answer with the ownership
confirmed message.
Similarly, if the take ownership message arrived after the mac was
stopped or when iwl_mvm_up() failed, setting rfkill will not trigger
sending the confirm message. As a result, CSME will not take
ownership, which will result in a disconnection.

Fix it by sending the ownership confirmed message immediately in such
cases.

Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221030191011.b2a4c009e3e6.I7f931b7ee8b168e8ac88b11f23bff98b7ed3cb19@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: fix the pinconf register offset of some pins

[ Upstream commit 3476b354c65db442580ef355885c69e60c546ef0 ]

Correct the bias-pull-up, bias-pull-down and bias-disable register
offset of mt7986 pin-42 to pin-49, in the original driver, the
relative offset value was erroneously decremented by 1.

Fixes: 360de6728064 ("pinctrl: mediatek: add support for MT7986 SoC")
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221106080114.7426-5-linux@fw-web.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: pinctrl: update uart/mmc bindings for MT7986 SoC

[ Upstream commit c115e7f51e685536ecb885854bdd4b3f225ff3e4 ]

Fix mmc and uart pins after uart splitting.

Some pinmux pins of the mt7986 pinctrl driver is composed of multiple
pinctrl groups, the original binding only allows one pinctrl group
per dts node, this patch sets "maxItems" for these groups and add new
examples to the binding documentation.

Fixes: 65916a1ca90a ("dt-bindings: pinctrl: update bindings for MT7986 SoC")
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221106080114.7426-3-linux@fw-web.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: Add the missed acpi_put_table() to fix memory leak

[ Upstream commit 10276a20be1115e1f76c189330da2992df980eee ]

When the radeon driver reads the bios information from ACPI
table in radeon_acpi_vfct_bios(), it misses to call acpi_put_table()
to release the ACPI memory after the init, so add acpi_put_table()
properly to fix the memory leak.

v2: fix text formatting (Alex)

Fixes: 268ba0a99f89 ("drm/radeon: implement ACPI VFCT vbios fetch (v3)")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bfq: fix waker_bfqq inconsistency crash

[ Upstream commit a1795c2ccb1e4c49220d2a0d381540024d71647c ]

This fixes crashes in bfq_add_bfqq_busy due to waker_bfqq being NULL,
but woken_list_node still being hashed. This would happen when
bfq_init_rq() expects a brand new allocated queue to be returned from
bfq_get_bfqq_handle_split() and unconditionally updates waker_bfqq
without resetting woken_list_node. Since we can always return oom_bfqq
when attempting to allocate, we cannot assume waker_bfqq starts as NULL.

Avoid setting woken_bfqq for oom_bfqq entirely, as it's not useful.

Crashes would have a stacktrace like:
[160595.656560]  bfq_add_bfqq_busy+0x110/0x1ec
[160595.661142]  bfq_add_request+0x6bc/0x980
[160595.666602]  bfq_insert_request+0x8ec/0x1240
[160595.671762]  bfq_insert_requests+0x58/0x9c
[160595.676420]  blk_mq_sched_insert_request+0x11c/0x198
[160595.682107]  blk_mq_submit_bio+0x270/0x62c
[160595.686759]  __submit_bio_noacct_mq+0xec/0x178
[160595.691926]  submit_bio+0x120/0x184
[160595.695990]  ext4_mpage_readpages+0x77c/0x7c8
[160595.701026]  ext4_readpage+0x60/0xb0
[160595.705158]  filemap_read_page+0x54/0x114
[160595.711961]  filemap_fault+0x228/0x5f4
[160595.716272]  do_read_fault+0xe0/0x1f0
[160595.720487]  do_fault+0x40/0x1c8

Tested by injecting random failures into bfq_get_queue, crashes go away
completely.

Fixes: 8ef3fc3a043c ("block, bfq: make shared queues inherit wakers")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221108181030.1611703-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: use blk_queue_max_discard_sectors helper

[ Upstream commit 258bea6388ac93f34561fd91064232d14e174bff ]

We currently only set q->limits.max_discard_sectors, but that is not
enough. Another field, max_hw_discard_sectors, was introduced in
commit 0034af036554 ("block: make /sys/block/<dev>/queue/discard_max_bytes
writeable").

The difference is that max_discard_sectors can be changed from user
space via sysfs, while max_hw_discard_sectors is the "hardware" upper
limit.

So use this helper, which sets both.

This is also a fixup for commit 998e9cbcd615 ("drbd: cleanup
decide_on_discard_support"): if discards are not supported, that does
not necessarily mean we also want to disable write_zeroes.

Fixes: 998e9cbcd615 ("drbd: cleanup decide_on_discard_support")
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221109133453.51652-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap-irq: Use the new num_config_regs property in regmap_add_irq_chip_fwnode

[ Upstream commit 84498d1fb35de6ab71bdfdb6270a464fb4a0951b ]

Commit faa87ce9196d ("regmap-irq: Introduce config registers for irq
types") added the num_config_regs, then commit 9edd4f5aee84 ("regmap-irq:
Deprecate type registers and virtual registers") suggested to replace
num_type_reg with it. However, regmap_add_irq_chip_fwnode wasn't modified
to use the new property. Later on, commit 255a03bb1bb3 ("ASoC: wcd9335:
Convert irq chip to config regs") removed the old num_type_reg property
from the WCD9335 driver's struct regmap_irq_chip, causing a null pointer
dereference in regmap_irq_set_type when it tried to index d->type_buf as
it was never allocated in regmap_add_irq_chip_fwnode:

[   39.199374] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000

[   39.200006] Call trace:
[   39.200014]  regmap_irq_set_type+0x84/0x1c0
[   39.200026]  __irq_set_trigger+0x60/0x1c0
[   39.200040]  __setup_irq+0x2f4/0x78c
[   39.200051]  request_threaded_irq+0xe8/0x1a0

Use num_config_regs in regmap_add_irq_chip_fwnode instead of num_type_reg,
and fall back to it if num_config_regs isn't defined to maintain backward
compatibility.

Fixes: faa87ce9196d ("regmap-irq: Introduce config registers for irq types")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20221107202114.823975-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: rcar-du: Drop leftovers dependencies from Kconfig

[ Upstream commit 1760eb547276299ab0c6a6cd3d29469e54ade615 ]

Commit 841281fe52a7 ("drm: rcar-du: Drop LVDS device tree backward
compatibility") has removed device tree overlay sources used for
backward compatibility with old bindings, but forgot to remove related
dependencies from Kconfig. Fix it.

Fixes: 841281fe52a7 ("drm: rcar-du: Drop LVDS device tree backward compatibility")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtw89: use u32_encode_bits() to fill MAC quota value

[ Upstream commit 525c06c81d75690a9b795cc62a758838c1a6b6fe ]

Coverity reported shift 16 bits could cause sign extension and might get
an unexpected value. Since the input values are predefined and no this
kind of case, original code is safe so far. But, still changing them to
use u32_encode_bits() will be more clear and prevent mistakes in the
future.

The original message of Coverity is:
  Suspicious implicit sign extension: "max_cfg->cma0_dma" with type "u16"
  (16 bits, unsigned) is promoted in "max_cfg->cma0_dma << 16" to type
  "int" (32 bits, signed), then sign-extended to type "unsigned long"
  (64 bits, unsigned).  If "max_cfg->cma0_dma << 16" is greater than
  0x7FFFFFFF, the upper bits of the result will all be 1."

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527095 ("Integer handling issues")
Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221108013858.10806-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: lcdif: Set and enable FIFO Panic threshold

[ Upstream commit e3cac8f7749f78dacdf19c00ed5862a1db52239f ]

In case the LCDIFv3 is used to drive a 4k panel via i.MX8MP HDMI bridge,
the LCDIFv3 becomes susceptible to FIFO underflows, these lead to nasty
flicker of the image on the panel, or image being shifted by half frame
horizontally every second frame. The flicker can be easily triggered by
running 3D application on top of weston compositor, like neverball or
chromium. Surprisingly glmark2-es2-wayland or glmark2-es2-drm does not
trigger this effect so easily.

Configure the FIFO Panic threshold register and enable the FIFO Panic
mode, which internally boosts the NoC interconnect priority for LCDIFv3
transactions in case of possible underflow. This mitigates the flicker
effect on 4k panels as well.

Fixes: 9db35bb349a0 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8mp EVK
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101152629.21768-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix ack.bufferSize to be 0 when generating an ack

[ Upstream commit 8889a711f9b4dcf4dd1330fa493081beebd118c9 ]

ack.bufferSize should be set to 0 when generating an ack.

Fixes: 8d94aa381dab ("rxrpc: Calls shouldn't hold socket refs")
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()

[ Upstream commit c3d96f690a790074b508fe183a41e36a00cd7ddd ]

Provide a CONFIG_PROC_FS=n fallback for proc_create_net_single_write().

Also provide a fallback for proc_create_net_data_write().

Fixes: 564def71765c ("proc: Add a way to make network proc files writable")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

virt/sev-guest: Add a MODULE_ALIAS

[ Upstream commit 2874529b3513bdc90299c90f40713602da685e35 ]

Autoload the driver when, for example, SNP init code creates the
corresponding platform device.

  [ bp: Rewrite commit message. ]

Fixes: fce96cf04430 ("virt: Add SEV-SNP guest driver")
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/ff480c5e688eb0a72a4db0a29c7b1bb54c45bfd4.1667594253.git.crobinso@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: r8a779f0: Fix SCIF parent clocks

[ Upstream commit 2e0d7d3eabce3babae1fd66d7650e00c848a3b45 ]

As serial communication requires a clean clock signal, the Serial
Communication Interfaces with FIFO (SCIF) are clocked by a clock that is
not affected by Spread Spectrum or Fractional Multiplication.

Hence change the parent clocks for the SCIF modules from the S0D12_PER
clock to the SASYNCPERD4 clock (which has the same clock rate), cfr.
R-Car S4-8 Hardware User's Manual rev. 0.81.

Fixes: 24aaff6a6ce4 ("clk: renesas: cpg-mssr: Add support for R-Car S4-8")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: r8a779f0: Fix HSCIF parent clocks

[ Upstream commit c258e3ab639112d8f5ae9df9a873750ae2623ce2 ]

As serial communication requires a clean clock signal, the High Speed
Serial Communication Interfaces with FIFO (HSCIF) are clocked by a clock
that is not affected by Spread Spectrum or Fractional Multiplication.

Hence change the parent clocks for the HSCIF modules from the S0D3_PER
clock to the SASYNCPERD1 clock (which has the same clock rate), cfr.
R-Car S4-8 Hardware User's Manual rev. 0.81.

Fixes: 080bcd8d5997 ("clk: renesas: r8a779f0: Add HSCIF clocks")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: camss: Do not attach an already attached power domain on MSM8916 platform

[ Upstream commit 3d658980e6dac2af6a024fdb6ded3d7bc44dc9ff ]

The change to dynamically allocated power domains neglected a case of
CAMSS on MSM8916 platform, where a single VFE power domain is neither
attached, linked or managed in runtime in any way explicitly.

This is a special case and it shall be kept as is, because the power
domain management is done outside of the driver, and it's very different
in comparison to all other platforms supported by CAMSS.

Fixes: 6b1814e26989 ("media: camss: Allocate power domain resources dynamically")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: camss: Clean up received buffers on failed start of streaming

[ Upstream commit c8f3582345e6a69da65ab588f7c4c2d1685b0e80 ]

It is required to return the received buffers, if streaming can not be
started. For instance media_pipeline_start() may fail with EPIPE, if
a link validation between entities is not passed, and in such a case
a user gets a kernel warning:

  WARNING: CPU: 1 PID: 520 at drivers/media/common/videobuf2/videobuf2-core.c:1592 vb2_start_streaming+0xec/0x160
  <snip>
  Call trace:
   vb2_start_streaming+0xec/0x160
   vb2_core_streamon+0x9c/0x1a0
   vb2_ioctl_streamon+0x68/0xbc
   v4l_streamon+0x30/0x3c
   __video_do_ioctl+0x184/0x3e0
   video_usercopy+0x37c/0x7b0
   video_ioctl2+0x24/0x40
   v4l2_ioctl+0x4c/0x70

The fix is to correct the error path in video_start_streaming() of camss.

Fixes: 0ac2586c410f ("media: camss: Add files which handle the video device nodes")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port

[ Upstream commit b8f6efccbb9dc0ff5dee7e20d69a4747298ee603 ]

When using wpa_supplicant v2.10, this driver is no longer able to
associate with any AP and fails in the EAPOL 4-way handshake while
sending the 2/4 message to the AP. The problem is not present in
wpa_supplicant v2.9 or older. The problem stems from HostAP commit
144314eaa ("wpa_supplicant: Send EAPOL frames over nl80211 where available")
which changes the way EAPOL frames are sent, from them being send
at L2 frames to them being sent via nl80211 control port.

An EAPOL frame sent as L2 frame is passed to the WiFi driver with
skb->protocol ETH_P_PAE, while EAPOL frame sent via nl80211 control
port has skb->protocol set to ETH_P_802_3 . The later happens in
ieee80211_tx_control_port(), where the EAPOL frame is encapsulated
into 802.3 frame.

The rsi_91x driver handles ETH_P_PAE EAPOL frames as high-priority
frames and sends them via highest-priority transmit queue, while
the ETH_P_802_3 frames are sent as regular frames. The EAPOL 4-way
handshake frames must be sent as highest-priority, otherwise the
4-way handshake times out.

Therefore, to fix this problem, inspect the skb control flags and
if flag IEEE80211_TX_CTRL_PORT_CTRL_PROTO is set, assume this is
an EAPOL frame and transmit the frame via high-priority queue just
like other ETH_P_PAE frames.

Fixes: 0eb42586cf87 ("rsi: data packet descriptor enhancements")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221104163339.227432-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: joystick - fix Kconfig warning for JOYSTICK_ADC

[ Upstream commit 6100a19c4fcfe154dd32f8a8ef4e8c0b1f607c75 ]

Fix a Kconfig warning for JOYSTICK_ADC by also selecting
IIO_BUFFER.

WARNING: unmet direct dependencies detected for IIO_BUFFER_CB
  Depends on [n]: IIO [=y] && IIO_BUFFER [=n]
  Selected by [y]:
  - JOYSTICK_ADC [=y] && INPUT [=y] && INPUT_JOYSTICK [=y] && IIO [=y]

Fixes: 2c2b364fddd5 ("Input: joystick - add ADC attached joystick driver.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221104201238.31628-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: core: fix possible resource leak in init_mtd()

[ Upstream commit 1aadf01e5076b9ab6bf294b9622335c651314895 ]

I got the error report while inject fault in init_mtd():

sysfs: cannot create duplicate filename '/devices/virtual/bdi/mtd-0'
Call Trace:
 <TASK>
 dump_stack_lvl+0x67/0x83
 sysfs_warn_dup+0x60/0x70
 sysfs_create_dir_ns+0x109/0x120
 kobject_add_internal+0xce/0x2f0
 kobject_add+0x98/0x110
 device_add+0x179/0xc00
 device_create_groups_vargs+0xf4/0x100
 device_create+0x7b/0xb0
 bdi_register_va.part.13+0x58/0x2d0
 bdi_register+0x9b/0xb0
 init_mtd+0x62/0x171 [mtd]
 do_one_initcall+0x6c/0x3c0
 do_init_module+0x58/0x222
 load_module+0x268e/0x27d0
 __do_sys_finit_module+0xd5/0x140
 do_syscall_64+0x37/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
 </TASK>
kobject_add_internal failed for mtd-0 with -EEXIST, don't try to register
things with the same name in the same directory.
Error registering mtd class or bdi: -17

If init_mtdchar() fails in init_mtd(), mtd_bdi will not be unregistered,
as a result, we can't load the mtd module again, to fix this by calling
bdi_unregister(mtd_bdi) after out_procfs label.

Fixes: 445caaa20c4d ("mtd: Allocate bdi objects dynamically")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221024065109.2050705-1-cuigaosheng1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: Fix device name leak when register device failed in add_mtd_device()

[ Upstream commit 895d68a39481a75c680aa421546931fb11942fa6 ]

There is a kmemleak when register device failed:
  unreferenced object 0xffff888101aab550 (size 8):
    comm "insmod", pid 3922, jiffies 4295277753 (age 925.408s)
    hex dump (first 8 bytes):
      6d 74 64 30 00 88 ff ff                          mtd0....
    backtrace:
      [<00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150
      [<000000003c32b416>] kvasprintf+0xb0/0x130
      [<000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0
      [<000000006e781163>] dev_set_name+0xab/0xe0
      [<00000000e30d0c78>] add_mtd_device+0x4bb/0x700
      [<00000000f3d34de7>] mtd_device_parse_register+0x2ac/0x3f0
      [<00000000c0d88488>] 0xffffffffa0238457
      [<00000000b40d0922>] 0xffffffffa02a008f
      [<0000000023d17b9d>] do_one_initcall+0x87/0x2a0
      [<00000000770f6ca6>] do_init_module+0xdf/0x320
      [<000000007b6768fe>] load_module+0x2f98/0x3330
      [<00000000346bed5a>] __do_sys_finit_module+0x113/0x1b0
      [<00000000674c2290>] do_syscall_64+0x35/0x80
      [<000000004c6a8d97>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

If register device failed, should call put_device() to give up the
reference.

Fixes: 1f24b5a8ecbb ("[MTD] driver model updates")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221022121352.2534682-1-zhangxiaoxu5@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs

[ Upstream commit ac1c5a03d3772b1db25e8092f771aa33f6ae2f7e ]

USB controllers on SM8250 doesn't work after coming back from suspend.
This can be fixed by keeping the USB GDSCs in retention mode so that
hardware can keep them ON and put into rentention mode once the parent
domain goes to a low power state.

Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102091320.66007-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: dispcc-sm6350: Add CLK_OPS_PARENT_ENABLE to pixel&byte src

[ Upstream commit 92039e8c080c63748f8e133e7cfad33a75daefb6 ]

Add the CLK_OPS_PARENT_ENABLE flag to pixel and byte clk srcs to
ensure set_rate can succeed.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: 837519775f1d ("clk: qcom: Add display clock controller driver for  SM6350")
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010155546.73884-1-konrad.dybcio@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-ipq806x: use parent_data for the last remaining entry

[ Upstream commit 55307e522cc7a4dddc3d231ca5cb7e68e9668f66 ]

Use parent_data for the last remaining entry (pll4). This clock is
provided by the lcc device.

Fixes: cb02866f9a74 ("clk: qcom: gcc-ipq806x: convert parent_names to parent_data")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927113826.246241-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: propagate precision across all frames, not just the last one

[ Upstream commit 529409ea92d590659be487ba0839710329bd8074 ]

When equivalent completed state is found and it has additional precision
restrictions, BPF verifier propagates precision to
currently-being-verified state chain (i.e., including parent states) so
that if some of the states in the chain are not yet completed, necessary
precision restrictions are enforced.

Unfortunately, right now this happens only for the last frame (deepest
active subprogram's frame), not all the frames. This can lead to
incorrect matching of states due to missing precision marker. Currently
this doesn't seem possible as BPF verifier forces everything to precise
when validated BPF program has any subprograms. But with the next patch
lifting this restriction, this becomes problematic.

In fact, without this fix, we'll start getting failure in one of the
existing test_verifier test cases:

  #906/p precise: cross frame pruning FAIL
  Unexpected success to load!
  verification time 48 usec
  stack depth 0+0
  processed 26 insns (limit 1000000) max_states_per_insn 3 total_states 17 peak_states 17 mark_read 8

This patch adds precision propagation across all frames.

Fixes: a3ce685dd01a ("bpf: fix precision tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: propagate precision in ALU/ALU64 operations

[ Upstream commit a3b666bfa9c9edc05bca62a87abafe0936bd7f97 ]

When processing ALU/ALU64 operations (apart from BPF_MOV, which is
handled correctly already; and BPF_NEG and BPF_END are special and don't
have source register), if destination register is already marked
precise, this causes problem with potentially missing precision tracking
for the source register. E.g., when we have r1 >>= r5 and r1 is marked
precise, but r5 isn't, this will lead to r5 staying as imprecise. This
is due to the precision backtracking logic stopping early when it sees
r1 is already marked precise. If r1 wasn't precise, we'd keep
backtracking and would add r5 to the set of registers that need to be
marked precise. So there is a discrepancy here which can lead to invalid
and incompatible states matched due to lack of precision marking on r5.
If r1 wasn't precise, precision backtracking would correctly mark both
r1 and r5 as precise.

This is simple to fix, though. During the forward instruction simulation
pass, for arithmetic operations of `scalar <op>= scalar` form (where
<op> is ALU or ALU64 operations), if destination register is already
precise, mark source register as precise. This applies only when both
involved registers are SCALARs. `ptr += scalar` and `scalar += ptr`
cases are already handled correctly.

This does have (negative) effect on some selftest programs and few
Cilium programs.  ~/baseline-tmp-results.csv are veristat results with
this patch, while ~/baseline-results.csv is without it. See post
scriptum for instructions on how to make Cilium programs testable with
veristat. Correctness has a price.

$ ./veristat -C -e file,prog,insns,states ~/baseline-results.csv ~/baseline-tmp-results.csv | grep -v '+0'
File                     Program               Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
-----------------------  --------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
bpf_cubic.bpf.linked1.o  bpf_cubic_cong_avoid              997             1700      +703 (+70.51%)                62                90        +28 (+45.16%)
test_l4lb.bpf.linked1.o  balancer_ingress                 4559             5469      +910 (+19.96%)               118               126          +8 (+6.78%)
-----------------------  --------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

$ ./veristat -C -e file,prog,verdict,insns,states ~/baseline-results-cilium.csv ~/baseline-tmp-results-cilium.csv | grep -v '+0'
File           Program                         Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
-------------  ------------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
bpf_host.o     tail_nodeport_nat_ingress_ipv6             4448             5261      +813 (+18.28%)               234               247         +13 (+5.56%)
bpf_host.o     tail_nodeport_nat_ipv6_egress              3396             3446        +50 (+1.47%)               201               203          +2 (+1.00%)
bpf_lxc.o      tail_nodeport_nat_ingress_ipv6             4448             5261      +813 (+18.28%)               234               247         +13 (+5.56%)
bpf_overlay.o  tail_nodeport_nat_ingress_ipv6             4448             5261      +813 (+18.28%)               234               247         +13 (+5.56%)
bpf_xdp.o      tail_lb_ipv4                              71736            73442      +1706 (+2.38%)              4295              4370         +75 (+1.75%)
-------------  ------------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

P.S. To make Cilium ([0]) programs libbpf-compatible and thus
veristat-loadable, apply changes from topmost commit in [1], which does
minimal changes to Cilium source code, mostly around SEC() annotations
and BPF map definitions.

  [0] https://github.com/cilium/cilium/
  [1] https://github.com/anakryiko/cilium/commits/libbpf-friendliness

Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: exynos4-is: fix return value check in fimc_md_probe()

[ Upstream commit e38e42c078da4af962d322b97e726dcb2f184e3f ]

devm_pinctrl_get() may return ERR_PTR(-EPROBE_DEFER), add a minus sign
to fix it.

Fixes: 4163851f7b99 ("[media] s5p-fimc: Use pinctrl API for camera ports configuration")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vivid: fix compose size exceed boundary

[ Upstream commit 94a7ad9283464b75b12516c5512541d467cefcf8 ]

syzkaller found a bug:

 BUG: unable to handle page fault for address: ffffc9000a3b1000
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD 100000067 P4D 100000067 PUD 10015f067 PMD 1121ca067 PTE 0
 Oops: 0002 [#1] PREEMPT SMP
 CPU: 0 PID: 23489 Comm: vivid-000-vid-c Not tainted 6.1.0-rc1+ #512
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
 RIP: 0010:memcpy_erms+0x6/0x10
[...]
 Call Trace:
  <TASK>
  ? tpg_fill_plane_buffer+0x856/0x15b0
  vivid_fillbuff+0x8ac/0x1110
  vivid_thread_vid_cap_tick+0x361/0xc90
  vivid_thread_vid_cap+0x21a/0x3a0
  kthread+0x143/0x180
  ret_from_fork+0x1f/0x30
  </TASK>

This is because we forget to check boundary after adjust compose->height
int V4L2_SEL_TGT_CROP case. Add v4l2_rect_map_inside() to fix this problem
for this case.

Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rkvdec: Add required padding

[ Upstream commit 00c47aa85bb26450edc6059c3d245de062e60b5d ]

The addresses of two elements of the segmap[][] member are passed to the
hardware which expects 128-bit aligned addresses. However, without this
patch offsetof(struct rkvdec_vp9_priv_tbl, segmap[0]) is an odd number
(2421) but the hardware just ignores the 5 least significant bits of the
address. As a result, the hardware writes the segmentation map to incorrect
locations.

Inserting 11 bytes of padding corrects this situation by making the said
addresses divisible by 16 (i.e. aligned on a 128-bit boundary).

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Fixes: f25709c4ff15 ("media: rkvdec: Add the VP9 backend")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: mtk-mdp3: fix error handling in mdp_probe()

[ Upstream commit 82b7d4b5d393d6654148e885efca0a3df63806f6 ]

Adjust label "err_return" order to avoid double freeing, and
add two labels for easy traceability.

Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: mtk-mdp3: fix error handling about components clock_on

[ Upstream commit 74a596e7fca6d240d61def5f448e55c256c12fed ]

Add goto statement in mdp_comp_clock_on() to avoid error code not being
propagated or returning positive values.
This change also performs a well-timed clock_off when an error occurs, and
reduces unnecessary error logging in mdp_cmdq_send().

Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: mtk-mdp3: fix error handling in mdp_cmdq_send()

[ Upstream commit 64e0a0804b1a7a77ee364f44ffa6a8e0e7b157d2 ]

Increase and refine the goto label in mdp_cmdq_send() to avoid
double free and facilitate traceability.
Also, remove redundant work queue event in blocking function
mdp_cmdq_send().

Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Prevent signed BPG offsets from bleeding into adjacent bits

[ Upstream commit cc84b66be223d36a3d10d59d68ba647e72db3099 ]

The bpg_offset array contains negative BPG offsets which fill the full 8
bits of a char thanks to two's complement: this however results in those
bits bleeding into the next field when the value is packed into DSC PPS
by the drm_dsc_helper function, which only expects range_bpg_offset to
contain 6-bit wide values.  As a consequence random slices appear
corrupted on-screen (tested on a Sony Tama Akatsuki device with sdm845).

Use AND operators to limit these two's complement values to 6 bits,
similar to the AMD and i915 drivers.

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508941/
Link: https://lore.kernel.org/r/20221026182824.876933-11-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Disallow 8 BPC DSC configuration for alternative BPC values

[ Upstream commit d053fbc449c47517b1f6516dbce2f917f2a9f51d ]

According to the `/* bpc 8 */` comment below only values for a
bits_per_component of 8 are currently hardcoded in place.  This is
further confirmed by downstream sources [1] containing different
constants for other BPC values (and different initial_offset too,
with an extra dependency on bits_per_pixel).  Prevent future mishaps by
explicitly disallowing any other bits_per_component value until the
right parameters are put in place and tested.

[1]: https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers/-/blob/DISPLAY.LA.2.0.r1-08000-WAIPIO.0/msm/sde_dsc_helper.c#L110-139

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508942/
Link: https://lore.kernel.org/r/20221026182824.876933-9-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Account for DSC's bits_per_pixel having 4 fractional bits

[ Upstream commit d2c277c61986942e99680cb67ce26423d0f42f11 ]

drm_dsc_config's bits_per_pixel field holds a fractional value with 4
bits, which all panel drivers should adhere to for
drm_dsc_pps_payload_pack() to generate a valid payload.  All code in the
DSI driver here seems to assume that this field doesn't contain any
fractional bits, hence resulting in the wrong values being computed.
Since none of the calculations leave any room for fractional bits or
seem to indicate any possible area of support, disallow such values
altogether.  calculate_rc_params() in intel_vdsc.c performs an identical
bitshift to get at this integer value.

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508938/
Link: https://lore.kernel.org/r/20221026182824.876933-8-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Migrate to drm_dsc_compute_rc_parameters()

[ Upstream commit c3a1aabce2d4087255de90100c3dad492e7d925c ]

As per the FIXME this code is entirely duplicate with what is already
provided inside drm_dsc_compute_rc_parameters(), supposedly because that
function was yielding "incorrect" results while in reality the panel
driver(s?) used for testing were providing incorrect parameters.

For example, this code from downstream assumed dsc->bits_per_pixel to
contain an integer value, whereas the upstream drm_dsc_config struct
stores it with 4 fractional bits.  drm_dsc_compute_rc_parameters()
already accounts for this feat while the panel driver used for testing
[1] wasn't, hence making drm_dsc_compute_rc_parameters() seem like it
was returning an incorrect result.
Other users of dsc->bits_per_pixel inside dsi_populate_dsc_params() also
treat it in the same erroneous way, and will be addressed in a separate
patch.
In the end, using drm_dsc_compute_rc_parameters() spares both a lot of
duplicate code and erratic behaviour.

[1]: https://git.linaro.org/people/vinod.koul/kernel.git/commit/?h=topic/pixel3_5.18-rc1&id=1d7d98ad564f1ec69e7525e07418918d90f247a1

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508939/
Link: https://lore.kernel.org/r/20221026182824.876933-7-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Appropriately set dsc->mux_word_size based on bpc

[ Upstream commit 0ca870ca304d3449b2ccdc3f0bad9843ff1519f0 ]

This field is currently unread but will come into effect when duplicated
code below is migrated to call drm_dsc_compute_rc_parameters(), which
uses the bpc-dependent value of the local variable mux_words_size in
much the same way.

The hardcoded constant seems to be a remnant from the `/* bpc 8 */`
comment right above, indicating that this group of field assignments is
applicable to bpc = 8 exclusively and should probably bail out on
different bpc values, until constants for other bpc values are added (or
the current ones are confirmed to be correct across multiple bpc's).

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508943/
Link: https://lore.kernel.org/r/20221026182824.876933-6-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Reuse earlier computed dsc->slice_chunk_size

[ Upstream commit e443459e2e6b8e0d3187dd0d09ef7fcea87531d2 ]

dsi_populate_dsc_params() is called prior to dsi_update_dsc_timing() and
already computes a value for slice_chunk_size, whose value doesn't need
to be recomputed and re-set here.

Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508934/
Link: https://lore.kernel.org/r/20221026182824.876933-5-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Use DIV_ROUND_UP instead of conditional increment on modulo

[ Upstream commit 1e8196103bd02a396b45c8f6188541634a47fce2 ]

This exact same math is used to compute bytes_in_slice above in
dsi_update_dsc_timing(), also used to fill slice_chunk_size.

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508935/
Link: https://lore.kernel.org/r/20221026182824.876933-4-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Remove repeated calculation of slice_per_intf

[ Upstream commit 170ffca836dd9f1a0219c4f67554d408fa2b5912 ]

slice_per_intf is already computed for intf_width, which holds the same
value as hdisplay.

Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508933/
Link: https://lore.kernel.org/r/20221026182824.876933-3-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Remove useless math in DSC calculations

[ Upstream commit 01a907980e0be3310f18c7d4955968f3b28e7147 ]

Multiplying a value by 2 and adding 1 to it always results in a value
that is uneven, and that 1 gets truncated immediately when performing
integer division by 2 again.  There is no "rounding" possible here.

After that target_bpp_x16 is used to store a multiplication of
bits_per_pixel by 16 which is only ever read to immediately be divided
by 16 again, and is elided in much the same way.

Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508932/
Link: https://lore.kernel.org/r/20221026182824.876933-2-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu1: Account for DSC's bits_per_pixel having 4 fractional bits

[ Upstream commit d3c1a8663d0ddb74eaa51121ccbb8340739a12a8 ]

According to the comment this DPU register contains the bits per pixel
as a 6.4 fractional value, conveniently matching the contents of
bits_per_pixel in struct drm_dsc_config which also uses 4 fractional
bits.  However, the downstream source this implementation was
copy-pasted from has its bpp field stored _without_ fractional part.

This makes the entire convoluted math obsolete as it is impossible to
pull those 4 fractional bits out of thin air, by somehow trying to reuse
the lowest 2 bits of a non-fractional bpp (lsb = bpp % 4??).

The rest of the code merely attempts to keep the integer part a multiple
of 4, which is rendered useless thanks to data |= dsc->bits_per_pixel <<
12; already filling up those bits anyway (but not on downstream).

Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/508946/
Link: https://lore.kernel.org/r/20221026182824.876933-10-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix slot type check in check_stack_write_var_off

[ Upstream commit f5e477a861e4a20d8a1c5f7a245f3a3c3c376b03 ]

For the case where allow_ptr_leaks is false, code is checking whether
slot type is STACK_INVALID and STACK_SPILL and rejecting other cases.
This is a consequence of incorrectly checking for register type instead
of the slot type (NOT_INIT and SCALAR_VALUE respectively). Fix the
check.

Fixes: 01f810ace9ed ("bpf: Allow variable-offset stack access")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Clobber stack slot when writing over spilled PTR_TO_BTF_ID

[ Upstream commit 261f4664caffdeb9dff4e83ee3c0334b1c3a552f ]

When support was added for spilled PTR_TO_BTF_ID to be accessed by
helper memory access, the stack slot was not overwritten to STACK_MISC
(and that too is only safe when env->allow_ptr_leaks is true).

This means that helpers who take ARG_PTR_TO_MEM and write to it may
essentially overwrite the value while the verifier continues to track
the slot for spilled register.

This can cause issues when PTR_TO_BTF_ID is spilled to stack, and then
overwritten by helper write access, which can then be passed to BPF
helpers or kfuncs.

Handle this by falling back to the case introduced in a later commit,
which will also handle PTR_TO_BTF_ID along with other pointer types,
i.e. cd17d38f8b28 ("bpf: Permits pointers on stack for helper calls").

Finally, include a comment on why REG_LIVE_WRITTEN is not being set when
clobber is set to true. In short, the reason is that while when clobber
is unset, we know that we won't be writing, when it is true, we *may*
write to any of the stack slots in that range. It may be a partial or
complete write, to just one or many stack slots.

We cannot be sure, hence to be conservative, we leave things as is and
never set REG_LIVE_WRITTEN for any stack slot. However, clobber still
needs to reset them to STACK_MISC assuming writes happened. However read
marks still need to be propagated upwards from liveness point of view,
as parent stack slot's contents may still continue to matter to child
states.

Cc: Yonghong Song <yhs@meta.com>
Fixes: 1d68f22b3d53 ("bpf: Handle spilled PTR_TO_BTF_ID properly when checking stack_boundary")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/hdmi: use devres helper for runtime PM management

[ Upstream commit b964444b2b64ce182495731d830499d1c588ccf6 ]

Use devm_pm_runtime_enable() to enable runtime PM. This way its effect
will be reverted on device unbind/destruction.

Fixes: 6ed9ed484d04 ("drm/msm/hdmi: Set up runtime PM for HDMI")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499647/
Link: https://lore.kernel.org/r/20220826093927.851597-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Handle -ESTALE returned by ima_filter_rule_match()

[ Upstream commit c7423dbdbc9ecef7fff5239d144cad4b9887f4de ]

IMA relies on the blocking LSM policy notifier callback to update the
LSM based IMA policy rules.

When SELinux update its policies, IMA would be notified and starts
updating all its lsm rules one-by-one. During this time, -ESTALE would
be returned by ima_filter_rule_match() if it is called with a LSM rule
that has not yet been updated. In ima_match_rules(), -ESTALE is not
handled, and the LSM rule is considered a match, causing extra files
to be measured by IMA.

Fix it by re-initializing a temporary rule if -ESTALE is returned by
ima_filter_rule_match(). The origin rule in the rule list would be
updated by the LSM policy notifier callback.

Fixes: b16942455193 ("ima: use the lsm policy update notifier")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: stop overriding drvdata

[ Upstream commit c6122688f2652d7f8a44000ce21e84e82bae2b5e ]

The rest of the code expects that master's device drvdata is the
struct msm_drm_private instance. Do not override the mdp5's drvdata.

Fixes: 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master components")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/508334/
Link: https://lore.kernel.org/r/20221024152642.3213488-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ttm: fix undefined behavior in bit shift for TTM_TT_FLAG_PRIV_POPULATED

[ Upstream commit 387659939c00156f8d6bab0fbc55b4eaf2b6bc5b ]

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in ./include/drm/ttm/ttm_tt.h:122:26
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
 <TASK>
 dump_stack_lvl+0x7d/0xa5
 dump_stack+0x15/0x1b
 ubsan_epilogue+0xe/0x4e
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
 ttm_bo_move_memcpy+0x3b4/0x460 [ttm]
 bo_driver_move+0x32/0x40 [drm_vram_helper]
 ttm_bo_handle_move_mem+0x118/0x200 [ttm]
 ttm_bo_validate+0xfa/0x220 [ttm]
 drm_gem_vram_pin_locked+0x70/0x1b0 [drm_vram_helper]
 drm_gem_vram_pin+0x48/0xb0 [drm_vram_helper]
 drm_gem_vram_plane_helper_prepare_fb+0x53/0xe0 [drm_vram_helper]
 drm_gem_vram_simple_display_pipe_prepare_fb+0x26/0x30 [drm_vram_helper]
 drm_simple_kms_plane_prepare_fb+0x4d/0xe0 [drm_kms_helper]
 drm_atomic_helper_prepare_planes+0xda/0x210 [drm_kms_helper]
 drm_atomic_helper_commit+0xc3/0x1e0 [drm_kms_helper]
 drm_atomic_commit+0x9c/0x160 [drm]
 drm_client_modeset_commit_atomic+0x33a/0x380 [drm]
 drm_client_modeset_commit_locked+0x77/0x220 [drm]
 drm_client_modeset_commit+0x31/0x60 [drm]
 __drm_fb_helper_restore_fbdev_mode_unlocked+0xa7/0x170 [drm_kms_helper]
 drm_fb_helper_set_par+0x51/0x90 [drm_kms_helper]
 fbcon_init+0x316/0x790
 visual_init+0x113/0x1d0
 do_bind_con_driver+0x2a3/0x5c0
 do_take_over_console+0xa9/0x270
 do_fbcon_takeover+0xa1/0x170
 do_fb_registered+0x2a8/0x340
 fbcon_fb_registered+0x47/0xe0
 register_framebuffer+0x294/0x4a0
 __drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper]
 drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper]
 drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper]
 drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper]
 bochs_pci_probe+0x6ca/0x772 [bochs]
 local_pci_probe+0x4d/0xb0
 pci_device_probe+0x119/0x320
 really_probe+0x181/0x550
 __driver_probe_device+0xc6/0x220
 driver_probe_device+0x32/0x100
 __driver_attach+0x195/0x200
 bus_for_each_dev+0xbb/0x120
 driver_attach+0x27/0x30
 bus_add_driver+0x22e/0x2f0
 driver_register+0xa9/0x190
 __pci_register_driver+0x90/0xa0
 bochs_pci_driver_init+0x52/0x1000 [bochs]
 do_one_initcall+0x76/0x430
 do_init_module+0x61/0x28a
 load_module+0x1f82/0x2e50
 __do_sys_finit_module+0xf8/0x190
 __x64_sys_finit_module+0x23/0x30
 do_syscall_64+0x58/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
 </TASK>

Fixes: 3312be8f6fc8 ("drm/ttm: move populated state into page flags")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031113350.4180975-1-cuigaosheng1@huawei.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure

[ Upstream commit c62102165dd79284d42383d2f7ed17301bd8e629 ]

In case mipi_dsi_attach() fails, call drm_panel_remove() to
avoid memory leak.

Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014231106.468063-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Update reference to struct spi_controller

[ Upstream commit bf585ccee22faf469d82727cf375868105b362f7 ]

struct spi_master has been renamed to struct spi_controller. Update the
reference in spi.rst to make it clickable again.

Fixes: 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221101173252.1069294-1-j.neuschaefer@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel/panel-sitronix-st7701: Fix RTNI calculation

[ Upstream commit c1cdee9b685a174fca849e1451c201a846a69318 ]

The RTNI field is multiplied by 16 and incremented by 512 before being
used as the minimum number of pixel clock per horizontal line, hence
it is necessary to subtract those 512 bytes from htotal and then divide
the result by 16 before writing the value into the RTNI field. Fix the
calculation.

Fixes: de2b4917843c ("drm/panel/panel-sitronix-st7701: Infer horizontal pixel count from TFT mode")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221012221159.88397-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: lcdif: change burst size to 256B

[ Upstream commit 2215cb3be5c28a1fd43036550c00c2371aeeba95 ]

If a axi bus master with a higher priority do a lot of memory access
FIFO underruns can be inspected. Increase the burst size to 256B to
avoid such underruns and to improve the memory access efficiency.

Fixes: 9db35bb349a0 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101164615.778299-1-m.felsch@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: r9a06g032: Repair grave increment error

[ Upstream commit 02693e11611e082e3c4d8653e8af028e43d31164 ]

If condition (clkspec.np != pd->dev.of_node) is true, then the driver
ends up in an endless loop, forever, locking up the machine.

Fixes: aad03a66f902 ("clk: renesas: r9a06g032: Add clock domain support")
Reviewed-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Gareth Williams <gareth.williams.jx@renesas.com>
Link: https://lore.kernel.org/r/20221028113834.7496-1-marex@denx.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/dgfx: Grab wakeref at i915_ttm_unmap_virtual

[ Upstream commit 1cacd6894d5f4084f1581435e92d8a18d6721b25 ]

We had already grabbed the rpm wakeref at obj destruction path,
but it also required to grab the wakeref when object moves.
When i915_gem_object_release_mmap_offset() gets called by
i915_ttm_move_notify(), it will release the mmap offset without
grabbing the wakeref. We want to avoid that therefore,
grab the wakeref at i915_ttm_unmap_virtual() accordingly.

While doing that also changed the lmem_userfault_lock from
mutex to spinlock, as spinlock widely used for list.

Also changed if (obj->userfault_count) to
GEM_BUG_ON(!obj->userfault_count).

v2:
- Removed lmem_userfault_{list,lock} from intel_gt. [Matt Auld]

Fixes: ad74457a6b5a ("drm/i915/dgfx: Release mmap on rpm suspend")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027092242.1476080-3-anshuman.gupta@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Encapsulate lmem rpm stuff in intel_runtime_pm

[ Upstream commit e66c8dcf997ed54b62f754351e7129e1cc4e3cf9 ]

Runtime pm is not really per GT, therefore it make sense to
move lmem_userfault_list, lmem_userfault_lock and
userfault_wakeref from intel_gt to intel_runtime_pm structure,
which is embedded to i915.

No functional change.

v2:
- Fixes the code comment nit. [Matt Auld]

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027092242.1476080-2-anshuman.gupta@intel.com
Stable-dep-of: 1cacd6894d5f ("drm/i915/dgfx: Grab wakeref at i915_ttm_unmap_virtual")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Refactor ttm ghost obj detection

[ Upstream commit 6667d78a1123d237d66e34923754ebca97d06d39 ]

Currently i915_ttm_to_gem() returns NULL for ttm ghost
object which makes it unclear when we should add a NULL
check for a caller of i915_ttm_to_gem() as ttm ghost
objects are expected behaviour for certain cases.

Create a separate function to detect ttm ghost object and
use that in places where we expect a ghost obj from ttm.

Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014131427.21102-1-nirmoy.das@intel.com
Stable-dep-of: 1cacd6894d5f ("drm/i915/dgfx: Grab wakeref at i915_ttm_unmap_virtual")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Handle all GTs on driver (un)load paths

[ Upstream commit f569ae759472fbe1f6fdddc7398360d43fdcc199 ]

This, along with the changes already landed in commit 1c66a12ab431
("drm/i915: Handle each GT on init/release and suspend/resume") makes
engines from all GTs actually known to the driver.

To accomplish this we need to sprinkle a lot of for_each_gt calls around
but is otherwise pretty un-eventuful.

v2:
 - Consolidate adjacent GT loops in a couple places.  (Daniele)

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915232654.3283095-5-matthew.d.roper@intel.com
Stable-dep-of: 1cacd6894d5f ("drm/i915/dgfx: Grab wakeref at i915_ttm_unmap_virtual")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: lvds: fix PM usage counter unbalance in poweron

[ Upstream commit 4dba27f1a14592ac4cf71c3bc1cc1fd05dea8015 ]

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
We fix it by replacing it with the newest pm_runtime_resume_and_get
to keep usage counter balanced.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Fixes: cca1705c3d89 ("drm/rockchip: lvds: Add PX30 support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922132107.105419-3-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: wait for vblank during pipe programming

[ Upstream commit 203ccaf586446b578909de1b763278033fb74b51 ]

[WHY]
Skipping vblank during global sync update request can result in
underflow on certain displays.

[HOW]
Roll back to the previous behavior where DC waits for vblank during pipe
programming.

Fixes: 5d3e14421410 ("drm/amd/display: do not wait for vblank during pipe programming")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Haiyi Zhou <Haiyi.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dw9768: Enable low-power probe on ACPI

[ Upstream commit 5f9a089b6de34655318afe8e544d9a9cc0fc1d29 ]

Add support for low-power probe to the driver. Also fix runtime PM API
usage in the driver.

Much of the hassle comes from different factors affecting device power
states during probe for ACPI and DT.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: 859891228e56 ("media: i2c: dw9768: Add DW9768 VCM driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/guc: Fix GuC error capture sizing estimation and reporting

[ Upstream commit befb231d5de2773f6c6f6cf918234e2e709110a5 ]

During GuC error capture initialization, we estimate the amount of size
we need for the error-capture-region of the shared GuC-log-buffer.
This calculation was incorrect so fix that. With the fixed calculation
we can reduce the allocation of error-capture region from 4MB to 1MB
(see note2 below for reasoning). Additionally, switch from drm_notice to
drm_debug for the 3X spare size check since that would be impossible to
hit without redesigning gpu_coredump framework to hold multiple captures.

NOTE1: Even for 1x the min size estimation case, actually running out
of space is a corner case because it can only occur if all engine
instances get reset all at once and i915 isn't able extract the capture
data fast enough within G2H handler worker.

NOTE2: With the corrected calculation, a DG2 part required ~77K and a PVC
required ~115K (1X min-est-size that is calculated as one-shot all-engine-
reset scenario).

Fixes: d7c15d76a554 ("drm/i915/guc: Check sizing of guc_capture output")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026060506.1007830-2-alan.previn.teres.alexis@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/guc: Add error-capture init warnings when needed

[ Upstream commit a894077890ad118de88c97c03f67a611ca60882a ]

If GuC is being used and we initialized GuC-error-capture,
we need to be warning if we don't provide an error-capture
register list in the firmware ADS, for valid GT engines.
A warning makes sense as this would impact debugability
without realizing why a reglist wasn't retrieved and reported
by GuC.

However, depending on the platform, we might have certain
engines that have a register list for engine instance error state
but not for engine class. Thus, add a check only to warn if the
register list was non existent vs an empty list (use the
empty lists to skip the warning).

NOTE: if a future platform were to introduce new registers
in place of what was an empty list on existing / legacy hardware
engines no warning is provided as the empty list is meant
to be used intentionally. As an example, if a future hardware
were to add blitter engine-class-registers (new) on top
of the legacy blitter engine-instance-register (HEAD, TAIL, etc.),
no warning is generated.

Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019072930.17755-2-alan.previn.teres.alexis@intel.com
Stable-dep-of: befb231d5de2 ("drm/i915/guc: Fix GuC error capture sizing estimation and reporting")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dt-bindings: rt5682: Set sound-dai-cells to 1

[ Upstream commit 07b16192f3f01d002d8ff37dcd4372980330ea93 ]

Commit 0adccaf1eac9 ("ASoC: dt-bindings: rt5682: Add #sound-dai-cells")
defined the sound-dai-cells property as 0. However, rt5682 has two DAIs,
AIF1 and AIF2, and therefore should have sound-dai-cells set to 1. Fix
it.

Fixes: 0adccaf1eac9 ("ASoC: dt-bindings: rt5682: Add #sound-dai-cells")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221024220015.1759428-4-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: r8a779a0: Fix SD0H clock name

[ Upstream commit db7076d5a7f0ca7dcf08f5095c74f86d4d0085ff ]

Correct the misspelled textual name of the SD0H clock.

Fixes: 470e3f0d0b15 ("clk: renesas: rcar-gen4: Introduce R-Car Gen4 CPG driver")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221012184830.3199-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: r8a779f0: Fix SD0H clock name

[ Upstream commit 99c05a2b710f16ea592ccb63ef5fe5f1f6b15db9 ]

Correct the misspelled textual name of the SD0H clock.

Fixes: 9b5dd1ff705c6854 ("clk: renesas: r8a779f0: Add SDH0 clock")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/1f682d338f133608f138ae87323707436ad8c748.1665558014.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>