devlink: validate length of region addr/len

[ Upstream commit ff3b63b8c299b73ac599b120653b47e275407656 ]

DEVLINK_ATTR_REGION_CHUNK_ADDR and DEVLINK_ATTR_REGION_CHUNK_LEN
lack entries in the netlink policy. Corresponding nla_get_u64()s
may read beyond the end of the message.

Fixes: 4e54795a27f5 ("devlink: Add support for region snapshot read command")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: add missing attribute validation for MTU property

[ Upstream commit 213320a67962ff6e7b83b704d55cbebc341426db ]

Add missing attribute validation for TIPC_NLA_PROP_MTU
to the netlink policy.

Fixes: 901271e0403a ("tipc: implement configuration of UDP media MTU")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv6: remove the old peer route if change it to a new one

[ Upstream commit d0098e4c6b83e502cc1cd96d67ca86bc79a6c559 ]

When we modify the peer route and changed it to a new one, we should
remove the old route first. Before the fix:

+ ip addr add dev dummy1 2001:db8::1 peer 2001:db8::2
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 256 pref medium
2001:db8::2 proto kernel metric 256 pref medium
+ ip addr change dev dummy1 2001:db8::1 peer 2001:db8::3
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 256 pref medium
2001:db8::2 proto kernel metric 256 pref medium

After the fix:
+ ip addr change dev dummy1 2001:db8::1 peer 2001:db8::3
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 256 pref medium
2001:db8::3 proto kernel metric 256 pref medium

This patch depend on the previous patch "net/ipv6: need update peer route
when modify metric" to update new peer route after delete old one.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv6: need update peer route when modify metric

[ Upstream commit 617940123e0140521f3080d2befc2bf55bcda094 ]

When we modify the route metric, the peer address's route need also
be updated. Before the fix:

+ ip addr add dev dummy1 2001:db8::1 peer 2001:db8::2 metric 60
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 60 pref medium
2001:db8::2 proto kernel metric 60 pref medium
+ ip addr change dev dummy1 2001:db8::1 peer 2001:db8::2 metric 61
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 61 pref medium
2001:db8::2 proto kernel metric 60 pref medium

After the fix:
+ ip addr change dev dummy1 2001:db8::1 peer 2001:db8::2 metric 61
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 61 pref medium
2001:db8::2 proto kernel metric 61 pref medium

Fixes: 8308f3ff1753 ("net/ipv6: Add support for specifying metric of connected routes")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/net/fib_tests: update addr_metric_test for peer route testing

[ Upstream commit 0d29169a708bf730ede287248e429d579f432d1d ]

This patch update {ipv4, ipv6}_addr_metric_test with
1. Set metric of address with peer route and see if the route added
correctly.
2. Modify metric and peer address for peer route and see if the route
changed correctly.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: fix MDIO bus PM PHY resuming

[ Upstream commit 611d779af7cad2b87487ff58e4931a90c20b113c ]

So far we have the unfortunate situation that mdio_bus_phy_may_suspend()
is called in suspend AND resume path, assuming that function result is
the same. After the original change this is no longer the case,
resulting in broken resume as reported by Geert.

To fix this call mdio_bus_phy_may_suspend() in the suspend path only,
and let the phy_device store the info whether it was suspended by
MDIO bus PM.

Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: add missing attribute validation for vendor subcommand

[ Upstream commit 6ba3da446551f2150fadbf8c7788edcb977683d3 ]

Add missing attribute validation for vendor subcommand attributes
to the netlink policy.

Fixes: 9e58095f9660 ("NFC: netlink: Implement vendor command support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: add missing attribute validation for deactivate target

[ Upstream commit 88e706d5168b07df4792dbc3d1bc37b83e4bd74d ]

Add missing attribute validation for NFC_ATTR_TARGET_INDEX
to the netlink policy.

Fixes: 4d63adfe12dd ("NFC: Add NFC_CMD_DEACTIVATE_TARGET support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: add missing attribute validation for SE API

[ Upstream commit 361d23e41ca6e504033f7e66a03b95788377caae ]

Add missing attribute validation for NFC_ATTR_SE_INDEX
to the netlink policy.

Fixes: 5ce3f32b5264 ("NFC: netlink: SE API implementation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: add missing attribute validation for array index

[ Upstream commit 669fcd7795900cd1880237cbbb57a7db66cb9ac8 ]

Add missing attribute validation for TEAM_ATTR_OPTION_ARRAY_INDEX
to the netlink policy.

Fixes: b13033262d24 ("team: introduce array options")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: add missing attribute validation for port ifindex

[ Upstream commit dd25cb272ccce4db67dc8509278229099e4f5e99 ]

Add missing attribute validation for TEAM_ATTR_OPTION_PORT_IFINDEX
to the netlink policy.

Fixes: 80f7c6683fe0 ("team: add support for per-port options")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fq: add missing attribute validation for orphan mask

[ Upstream commit 7e6dc03eeb023e18427a373522f1d247b916a641 ]

Add missing attribute validation for TCA_FQ_ORPHAN_MASK
to the netlink policy.

Fixes: 06eb395fa985 ("pkt_sched: fq: better control of DDOS traffic")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macsec: add missing attribute validation for port

[ Upstream commit 31d9a1c524964bac77b7f9d0a1ac140dc6b57461 ]

Add missing attribute validation for IFLA_MACSEC_PORT
to the netlink policy.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: add missing attribute validation for termination

[ Upstream commit ab02ad660586b94f5d08912a3952b939cf4c4430 ]

Add missing attribute validation for IFLA_CAN_TERMINATION
to the netlink policy.

Fixes: 12a6075cabc0 ("can: dev: add CAN interface termination API")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl802154: add missing attribute validation for dev_type

[ Upstream commit b60673c4c418bef7550d02faf53c34fbfeb366bf ]

Add missing attribute type validation for IEEE802154_ATTR_DEV_TYPE
to the netlink policy.

Fixes: 90c049b2c6ae ("ieee802154: interface type to be added")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl802154: add missing attribute validation

[ Upstream commit 9322cd7c4af2ccc7fe7c5f01adb53f4f77949e92 ]

Add missing attribute validation for several u8 types.

Fixes: 2c21d11518b6 ("net: add NL802154 interface for configuration of 802.15.4 devices")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fib: add missing attribute validation for tun_id

[ Upstream commit 4c16d64ea04056f1b1b324ab6916019f6a064114 ]

Add missing netlink policy entry for FRA_TUN_ID.

Fixes: e7030878fc84 ("fib: Add fib rule match on tunnel id")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devlink: validate length of param values

[ Upstream commit 8750939b6ad86abc3f53ec8a9683a1cded4a5654 ]

DEVLINK_ATTR_PARAM_VALUE_DATA may have different types
so it's not checked by the normal netlink policy. Make
sure the attribute length is what we expect.

Fixes: e3b7ca18ad7b ("devlink: Add param set command")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: memcg: fix lockdep splat in inet_csk_accept()

commit 06669ea346e476a5339033d77ef175566a40efbb upstream.

Locking newsk while still holding the listener lock triggered
a lockdep splat [1]

We can simply move the memcg code after we release the listener lock,
as this can also help if multiple threads are sharing a common listener.

Also fix a typo while reading socket sk_rmem_alloc.

[1]
WARNING: possible recursive locking detected
5.6.0-rc3-syzkaller #0 Not tainted
--------------------------------------------
syz-executor598/9524 is trying to acquire lock:
ffff88808b5b8b90 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline]
ffff88808b5b8b90 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x69f/0xd30 net/ipv4/inet_connection_sock.c:492

but task is already holding lock:
ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline]
ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x8d/0xd30 net/ipv4/inet_connection_sock.c:445

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(sk_lock-AF_INET6);
  lock(sk_lock-AF_INET6);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

1 lock held by syz-executor598/9524:
 #0: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline]
 #0: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x8d/0xd30 net/ipv4/inet_connection_sock.c:445

stack backtrace:
CPU: 0 PID: 9524 Comm: syz-executor598 Not tainted 5.6.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x188/0x20d lib/dump_stack.c:118
 print_deadlock_bug kernel/locking/lockdep.c:2370 [inline]
 check_deadlock kernel/locking/lockdep.c:2411 [inline]
 validate_chain kernel/locking/lockdep.c:2954 [inline]
 __lock_acquire.cold+0x114/0x288 kernel/locking/lockdep.c:3954
 lock_acquire+0x197/0x420 kernel/locking/lockdep.c:4484
 lock_sock_nested+0xc5/0x110 net/core/sock.c:2947
 lock_sock include/net/sock.h:1541 [inline]
 inet_csk_accept+0x69f/0xd30 net/ipv4/inet_connection_sock.c:492
 inet_accept+0xe9/0x7c0 net/ipv4/af_inet.c:734
 __sys_accept4_file+0x3ac/0x5b0 net/socket.c:1758
 __sys_accept4+0x53/0x90 net/socket.c:1809
 __do_sys_accept4 net/socket.c:1821 [inline]
 __se_sys_accept4 net/socket.c:1818 [inline]
 __x64_sys_accept4+0x93/0xf0 net/socket.c:1818
 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4445c9
Code: e8 0c 0d 03 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc35b37608 EFLAGS: 00000246 ORIG_RAX: 0000000000000120
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004445c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000306777 R09: 0000000000306777
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00000000004053d0 R14: 0000000000000000 R15: 0000000000000000

Fixes: d752a4986532 ("net: memcg: late association of sock to memcg")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: memcg: late association of sock to memcg

[ Upstream commit d752a4986532cb6305dfd5290a614cde8072769d ]

If a TCP socket is allocated in IRQ context or cloned from unassociated
(i.e. not associated to a memcg) in IRQ context then it will remain
unassociated for its whole life. Almost half of the TCPs created on the
system are created in IRQ context, so, memory used by such sockets will
not be accounted by the memcg.

This issue is more widespread in cgroup v1 where network memory
accounting is opt-in but it can happen in cgroup v2 if the source socket
for the cloning was created in root memcg.

To fix the issue, just do the association of the sockets at the accept()
time in the process context and then force charge the memory buffer
already used and reserved by the socket.

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: memcg: net: do not associate sock with unrelated cgroup

[ Upstream commit e876ecc67db80dfdb8e237f71e5b43bb88ae549c ]

We are testing network memory accounting in our setup and noticed
inconsistent network memory usage and often unrelated cgroups network
usage correlates with testing workload. On further inspection, it
seems like mem_cgroup_sk_alloc() and cgroup_sk_alloc() are broken in
irq context specially for cgroup v1.

mem_cgroup_sk_alloc() and cgroup_sk_alloc() can be called in irq context
and kind of assumes that this can only happen from sk_clone_lock()
and the source sock object has already associated cgroup. However in
cgroup v1, where network memory accounting is opt-in, the source sock
can be unassociated with any cgroup and the new cloned sock can get
associated with unrelated interrupted cgroup.

Cgroup v2 can also suffer if the source sock object was created by
process in the root cgroup or if sk_alloc() is called in irq context.
The fix is to just do nothing in interrupt.

WARNING: Please note that about half of the TCP sockets are allocated
from the IRQ context, so, memory used by such sockets will not be
accouted by the memcg.

The stack trace of mem_cgroup_sk_alloc() from IRQ-context:

CPU: 70 PID: 12720 Comm: ssh Tainted:  5.6.0-smp-DEV #1
Hardware name: ...
Call Trace:
 <IRQ>
 dump_stack+0x57/0x75
 mem_cgroup_sk_alloc+0xe9/0xf0
 sk_clone_lock+0x2a7/0x420
 inet_csk_clone_lock+0x1b/0x110
 tcp_create_openreq_child+0x23/0x3b0
 tcp_v6_syn_recv_sock+0x88/0x730
 tcp_check_req+0x429/0x560
 tcp_v6_rcv+0x72d/0xa40
 ip6_protocol_deliver_rcu+0xc9/0x400
 ip6_input+0x44/0xd0
 ? ip6_protocol_deliver_rcu+0x400/0x400
 ip6_rcv_finish+0x71/0x80
 ipv6_rcv+0x5b/0xe0
 ? ip6_sublist_rcv+0x2e0/0x2e0
 process_backlog+0x108/0x1e0
 net_rx_action+0x26b/0x460
 __do_softirq+0x104/0x2a6
 do_softirq_own_stack+0x2a/0x40
 </IRQ>
 do_softirq.part.19+0x40/0x50
 __local_bh_enable_ip+0x51/0x60
 ip6_finish_output2+0x23d/0x520
 ? ip6table_mangle_hook+0x55/0x160
 __ip6_finish_output+0xa1/0x100
 ip6_finish_output+0x30/0xd0
 ip6_output+0x73/0x120
 ? __ip6_finish_output+0x100/0x100
 ip6_xmit+0x2e3/0x600
 ? ipv6_anycast_cleanup+0x50/0x50
 ? inet6_csk_route_socket+0x136/0x1e0
 ? skb_free_head+0x1e/0x30
 inet6_csk_xmit+0x95/0xf0
 __tcp_transmit_skb+0x5b4/0xb20
 __tcp_send_ack.part.60+0xa3/0x110
 tcp_send_ack+0x1d/0x20
 tcp_rcv_state_process+0xe64/0xe80
 ? tcp_v6_connect+0x5d1/0x5f0
 tcp_v6_do_rcv+0x1b1/0x3f0
 ? tcp_v6_do_rcv+0x1b1/0x3f0
 __release_sock+0x7f/0xd0
 release_sock+0x30/0xa0
 __inet_stream_connect+0x1c3/0x3b0
 ? prepare_to_wait+0xb0/0xb0
 inet_stream_connect+0x3b/0x60
 __sys_connect+0x101/0x120
 ? __sys_getsockopt+0x11b/0x140
 __x64_sys_connect+0x1a/0x20
 do_syscall_64+0x51/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The stack trace of mem_cgroup_sk_alloc() from IRQ-context:
Fixes: 2d7580738345 ("mm: memcontrol: consolidate cgroup socket tracking")
Fixes: d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: reinitialize IRQs when MTU is modified

[ Upstream commit a9b952d267e59a3b405e644930f46d252cea7122 ]

MTU changes may affect the number of IRQs so we must call
bnxt_close_nic()/bnxt_open_nic() with the irq_re_init parameter
set to true.  The reason is that a larger MTU may require
aggregation rings not needed with smaller MTU.  We may not be
able to allocate the required number of aggregation rings and
so we reduce the number of channels which will change the number
of IRQs.  Without this patch, it may crash eventually in
pci_disable_msix() when the IRQs are not properly unwound.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sfc: detach from cb_page in efx_copy_channel()

[ Upstream commit 4b1bd9db078f7d5332c8601a2f5bd43cf0458fd4 ]

It's a resource, not a parameter, so we can't copy it into the new
 channel's TX queues, otherwise aliasing will lead to resource-
 management bugs if the channel is subsequently torn down without
 being initialised.

Before the Fixes:-tagged commit there was a similar bug with
 tsoh_page, but I'm not sure it's worth doing another fix for such
 old kernels.

Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2")
Suggested-by: Derek Shute <Derek.Shute@stratus.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: check disconnect status after long sleep

[ Upstream commit d64c7a08034b32c285e576208ae44fc3ba3fa7df ]

Dell USB Type C docking WD19/WD19DC attaches additional peripherals as:

  /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
      |__ Port 1: Dev 11, If 0, Class=Hub, Driver=hub/4p, 5000M
          |__ Port 3: Dev 12, If 0, Class=Hub, Driver=hub/4p, 5000M
          |__ Port 4: Dev 13, If 0, Class=Vendor Specific Class,
              Driver=r8152, 5000M

where usb 2-1-3 is a hub connecting all USB Type-A/C ports on the dock.

When hotplugging such dock with additional usb devices already attached on
it, the probing process may reset usb 2.1 port, therefore r8152 ethernet
device is also reset. However, during r8152 device init there are several
for-loops that, when it's unable to retrieve hardware registers due to
being disconnected from USB, may take up to 14 seconds each in practice,
and that has to be completed before USB may re-enumerate devices on the
bus. As a result, devices attached to the dock will only be available
after nearly 1 minute after the dock was plugged in:

  [ 216.388290] [250] r8152 2-1.4:1.0: usb_probe_interface
  [ 216.388292] [250] r8152 2-1.4:1.0: usb_probe_interface - got id
  [ 258.830410] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): PHY not ready
  [ 258.830460] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): Invalid header when reading pass-thru MAC addr
  [ 258.830464] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): Get ether addr fail

This happens in, for example, r8153_init:

  static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
    void *data, u16 type)
  {
    if (test_bit(RTL8152_UNPLUG, &tp->flags))
      return -ENODEV;
    ...
  }

  static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
  {
    u32 data;
    ...
    generic_ocp_read(tp, index, sizeof(tmp), &tmp, type | byen);

    data = __le32_to_cpu(tmp);
    ...
    return (u16)data;
  }

  static void r8153_init(struct r8152 *tp)
  {
    ...
    if (test_bit(RTL8152_UNPLUG, &tp->flags))
      return;

    for (i = 0; i < 500; i++) {
      if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
          AUTOLOAD_DONE)
        break;
      msleep(20);
    }
    ...
  }

Since ocp_read_word() doesn't check the return status of
generic_ocp_read(), and the only exit condition for the loop is to have
a match in the returned value, such loops will only ends after exceeding
its maximum runs when the device has been marked as disconnected, which
takes 500 * 20ms = 10 seconds in theory, 14 in practice.

To solve this long latency another test to RTL8152_UNPLUG flag should be
added after those 20ms sleep to skip unnecessary loops, so that the device
probe can complete early and proceed to parent port reset/reprobe process.

This can be reproduced on all kernel versions up to latest v5.6-rc2, but
after v5.5-rc7 the reproduce rate is dramatically lowered to 1/30 or less
while it was around 1/2.

Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: systemport: fix index check to avoid an array out of bounds access

[ Upstream commit c0368595c1639947839c0db8294ee96aca0b3b86 ]

Currently the bounds check on index is off by one and can lead to
an out of bounds access on array priv->filters_loc when index is
RXCHK_BRCM_TAG_MAX.

Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac1000: Disable ACS if enhanced descs are not used

[ Upstream commit b723bd933980f4956dabc8a8d84b3e83be8d094c ]

ACS (auto PAD/FCS stripping) removes FCS off 802.3 packets (LLC) so that
there is no need to manually strip it for such packets. The enhanced DMA
descriptors allow to flag LLC packets so that the receiving callback can
use that to strip FCS manually or not. On the other hand, normal
descriptors do not support that.

Thus in order to not truncate LLC packet ACS should be disabled when
using normal DMA descriptors.

Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/packet: tpacket_rcv: do not increment ring index on drop

[ Upstream commit 46e4c421a053c36bf7a33dda2272481bcaf3eed3 ]

In one error case, tpacket_rcv drops packets after incrementing the
ring producer index.

If this happens, it does not update tp_status to TP_STATUS_USER and
thus the reader is stalled for an iteration of the ring, causing out
of order arrival.

The only such error path is when virtio_net_hdr_from_skb fails due
to encountering an unknown GSO type.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: nfc: fix bounds checking bugs on "pipe"

[ Upstream commit a3aefbfe45751bf7b338c181b97608e276b5bb73 ]

This is similar to commit 674d9de02aa7 ("NFC: Fix possible memory
corruption when handling SHDLC I-Frame commands") and commit d7ee81ad09f0
("NFC: nci: Add some bounds checking in nci_hci_cmd_received()") which
added range checks on "pipe".

The "pipe" variable comes skb->data[0] in nfc_hci_msg_rx_work().
It's in the 0-255 range.  We're using it as the array index into the
hdev->pipes[] array which has NFC_HCI_MAX_PIPES (128) members.

Fixes: 118278f20aa8 ("NFC: hci: Add pipes table to reference them with a tuple {gate, host}")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: macsec: update SCI upon MAC address change.

[ Upstream commit 6fc498bc82929ee23aa2f35a828c6178dfd3f823 ]

SCI should be updated, because it contains MAC in its first 6 octets.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: Use netlink header as base to calculate bad attribute offset

[ Upstream commit 84b3268027641401bb8ad4427a90a3cce2eb86f5 ]

Userspace might send a batch that is composed of several netlink
messages. The netlink_ack() function must use the pointer to the netlink
header as base to calculate the bad attribute offset.

Fixes: 2d4bc93368f5 ("netlink: extended ACK reporting")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv6: use configured metric when add peer route

[ Upstream commit 07758eb9ff52794fba15d03aa88d92dbd1b7d125 ]

When we add peer address with metric configured, IPv4 could set the dest
metric correctly, but IPv6 do not. e.g.

]# ip addr add 192.0.2.1 peer 192.0.2.2/32 dev eth1 metric 20
]# ip route show dev eth1
192.0.2.2 proto kernel scope link src 192.0.2.1 metric 20
]# ip addr add 2001:db8::1 peer 2001:db8::2/128 dev eth1 metric 20
]# ip -6 route show dev eth1
2001:db8::1 proto kernel metric 20 pref medium
2001:db8::2 proto kernel metric 256 pref medium

Fix this by using configured metric instead of default one.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 8308f3ff1753 ("net/ipv6: Add support for specifying metric of connected routes")
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: don't deref eth hdr before checking it's set

[ Upstream commit ad8192767c9f9cf97da57b9ffcea70fb100febef ]

IPvlan in L3 mode discards outbound multicast packets but performs
the check before ensuring the ether-header is set or not. This is
an error that Eric found through code browsing.

Fixes: 2ad7bf363841 (“ipvlan: Initial check-in of the IPVLAN driver.”)
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast()

[ Upstream commit afe207d80a61e4d6e7cfa0611a4af46d0ba95628 ]

Commit e18b353f102e ("ipvlan: add cond_resched_rcu() while
processing muticast backlog") added a cond_resched_rcu() in a loop
using rcu protection to iterate over slaves.

This is breaking rcu rules, so lets instead use cond_resched()
at a point we can reschedule

Fixes: e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: do not add hardware address of master to its unicast filter list

[ Upstream commit 63aae7b17344d4b08a7d05cb07044de4c0f9dcc6 ]

There is a problem when ipvlan slaves are created on a master device that
is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not
support unicast address filtering. When an ipvlan device is brought up in
ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware
address of the vmxnet3 master device to the unicast address list of the
master device, phy_dev->uc. This inevitably leads to the vmxnet3 master
device being forced into promiscuous mode by __dev_set_rx_mode().

Promiscuous mode is switched on the master despite the fact that there is
still only one hardware address that the master device should use for
filtering in order for the ipvlan device to be able to receive packets.
The comment above struct net_device describes the uc_promisc member as a
"counter, that indicates, that promiscuous mode has been enabled due to
the need to listen to additional unicast addresses in a device that does
not implement ndo_set_rx_mode()". Moreover, the design of ipvlan
guarantees that only the hardware address of a master device,
phy_dev->dev_addr, will be used to transmit and receive all packets from
its ipvlan slaves. Thus, the unicast address list of the master device
should not be modified by ipvlan_open() and ipvlan_stop() in order to make
ipvlan a workable option on masters that do not support unicast address
filtering.

Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver")
Reported-by: Per Sundstrom <per.sundstrom@redqube.se>
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: add cond_resched_rcu() while processing muticast backlog

[ Upstream commit e18b353f102e371580f3f01dd47567a25acc3c1d ]

If there are substantial number of slaves created as simulated by
Syzbot, the backlog processing could take much longer and result
into the issue found in the Syzbot report.

INFO: rcu_sched detected stalls on CPUs/tasks:
        (detected by 1, t=10502 jiffies, g=5049, c=5048, q=752)
All QSes seen, last rcu_sched kthread activity 10502 (4294965563-4294955061), jiffies_till_next_fqs=1, root ->qsmask 0x0
syz-executor.1  R  running task on cpu   1  10984 11210   3866 0x30020008 179034491270
Call Trace:
 <IRQ>
 [<ffffffff81497163>] _sched_show_task kernel/sched/core.c:8063 [inline]
 [<ffffffff81497163>] _sched_show_task.cold+0x2fd/0x392 kernel/sched/core.c:8030
 [<ffffffff8146a91b>] sched_show_task+0xb/0x10 kernel/sched/core.c:8073
 [<ffffffff815c931b>] print_other_cpu_stall kernel/rcu/tree.c:1577 [inline]
 [<ffffffff815c931b>] check_cpu_stall kernel/rcu/tree.c:1695 [inline]
 [<ffffffff815c931b>] __rcu_pending kernel/rcu/tree.c:3478 [inline]
 [<ffffffff815c931b>] rcu_pending kernel/rcu/tree.c:3540 [inline]
 [<ffffffff815c931b>] rcu_check_callbacks.cold+0xbb4/0xc29 kernel/rcu/tree.c:2876
 [<ffffffff815e3962>] update_process_times+0x32/0x80 kernel/time/timer.c:1635
 [<ffffffff816164f0>] tick_sched_handle+0xa0/0x180 kernel/time/tick-sched.c:161
 [<ffffffff81616ae4>] tick_sched_timer+0x44/0x130 kernel/time/tick-sched.c:1193
 [<ffffffff815e75f7>] __run_hrtimer kernel/time/hrtimer.c:1393 [inline]
 [<ffffffff815e75f7>] __hrtimer_run_queues+0x307/0xd90 kernel/time/hrtimer.c:1455
 [<ffffffff815e90ea>] hrtimer_interrupt+0x2ea/0x730 kernel/time/hrtimer.c:1513
 [<ffffffff844050f4>] local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1031 [inline]
 [<ffffffff844050f4>] smp_apic_timer_interrupt+0x144/0x5e0 arch/x86/kernel/apic/apic.c:1056
 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778
RIP: 0010:do_raw_read_lock+0x22/0x80 kernel/locking/spinlock_debug.c:153
RSP: 0018:ffff8801dad07ab8 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff12
RAX: 0000000000000000 RBX: ffff8801c4135680 RCX: 0000000000000000
RDX: 1ffff10038826afe RSI: ffff88019d816bb8 RDI: ffff8801c41357f0
RBP: ffff8801dad07ac0 R08: 0000000000004b15 R09: 0000000000310273
R10: ffff88019d816bb8 R11: 0000000000000001 R12: ffff8801c41357e8
R13: 0000000000000000 R14: ffff8801cfb19850 R15: ffff8801cfb198b0
 [<ffffffff8101460e>] __raw_read_lock_bh include/linux/rwlock_api_smp.h:177 [inline]
 [<ffffffff8101460e>] _raw_read_lock_bh+0x3e/0x50 kernel/locking/spinlock.c:240
 [<ffffffff840d78ca>] ipv6_chk_mcast_addr+0x11a/0x6f0 net/ipv6/mcast.c:1006
 [<ffffffff84023439>] ip6_mc_input+0x319/0x8e0 net/ipv6/ip6_input.c:482
 [<ffffffff840211c8>] dst_input include/net/dst.h:449 [inline]
 [<ffffffff840211c8>] ip6_rcv_finish+0x408/0x610 net/ipv6/ip6_input.c:78
 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:292 [inline]
 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:286 [inline]
 [<ffffffff840214de>] ipv6_rcv+0x10e/0x420 net/ipv6/ip6_input.c:278
 [<ffffffff83a29efa>] __netif_receive_skb_one_core+0x12a/0x1f0 net/core/dev.c:5303
 [<ffffffff83a2a15c>] __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:5417
 [<ffffffff83a2f536>] process_backlog+0x216/0x6c0 net/core/dev.c:6243
 [<ffffffff83a30d1b>] napi_poll net/core/dev.c:6680 [inline]
 [<ffffffff83a30d1b>] net_rx_action+0x47b/0xfb0 net/core/dev.c:6748
 [<ffffffff846002c8>] __do_softirq+0x2c8/0x99a kernel/softirq.c:317
 [<ffffffff813e656a>] invoke_softirq kernel/softirq.c:399 [inline]
 [<ffffffff813e656a>] irq_exit+0x16a/0x1a0 kernel/softirq.c:439
 [<ffffffff84405115>] exiting_irq arch/x86/include/asm/apic.h:561 [inline]
 [<ffffffff84405115>] smp_apic_timer_interrupt+0x165/0x5e0 arch/x86/kernel/apic/apic.c:1058
 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778
 </IRQ>
RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:102
RSP: 0018:ffff880196033bd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff12
RAX: ffff88019d8161c0 RBX: 00000000ffffffff RCX: ffffc90003501000
RDX: 0000000000000002 RSI: ffffffff816236d1 RDI: 0000000000000005
RBP: ffff880196033bd8 R08: ffff88019d8161c0 R09: 0000000000000000
R10: 1ffff10032c067f0 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000
 [<ffffffff816236d1>] do_futex+0x151/0x1d50 kernel/futex.c:3548
 [<ffffffff816260f0>] C_SYSC_futex kernel/futex_compat.c:201 [inline]
 [<ffffffff816260f0>] compat_SyS_futex+0x270/0x3b0 kernel/futex_compat.c:175
 [<ffffffff8101da17>] do_syscall_32_irqs_on arch/x86/entry/common.c:353 [inline]
 [<ffffffff8101da17>] do_fast_syscall_32+0x357/0xe1c arch/x86/entry/common.c:415
 [<ffffffff84401a9b>] entry_SYSENTER_compat+0x8b/0x9d arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f23c69
RSP: 002b:00000000f5d1f12c EFLAGS: 00000282 ORIG_RAX: 00000000000000f0
RAX: ffffffffffffffda RBX: 000000000816af88 RCX: 0000000000000080
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000816af8c
RBP: 00000000f5d1f228 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
rcu_sched kthread starved for 10502 jiffies! g5049 c5048 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=1
rcu_sched       R  running task on cpu   1  13048     8      2 0x90000000 179099587640
Call Trace:
 [<ffffffff8147321f>] context_switch+0x60f/0xa60 kernel/sched/core.c:3209
 [<ffffffff8100095a>] __schedule+0x5aa/0x1da0 kernel/sched/core.c:3934
 [<ffffffff810021df>] schedule+0x8f/0x1b0 kernel/sched/core.c:4011
 [<ffffffff8101116d>] schedule_timeout+0x50d/0xee0 kernel/time/timer.c:1803
 [<ffffffff815c13f1>] rcu_gp_kthread+0xda1/0x3b50 kernel/rcu/tree.c:2327
 [<ffffffff8144b318>] kthread+0x348/0x420 kernel/kthread.c:246
 [<ffffffff84400266>] ret_from_fork+0x56/0x70 arch/x86/entry/entry_64.S:393

Fixes: ba35f8588f47 (“ipvlan: Defer multicast / broadcast processing to a work-queue”)
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interface

[ Upstream commit 60380488e4e0b95e9e82aa68aa9705baa86de84c ]

Rafał found an issue that for non-Ethernet interface, if we down and up
frequently, the memory will be consumed slowly.

The reason is we add allnodes/allrouters addressed in multicast list in
ipv6_add_dev(). When link down, we call ipv6_mc_down(), store all multicast
addresses via mld_add_delrec(). But when link up, we don't call ipv6_mc_up()
for non-Ethernet interface to remove the addresses. This makes idev->mc_tomb
getting bigger and bigger. The call stack looks like:

addrconf_notify(NETDEV_REGISTER)
ipv6_add_dev
ipv6_dev_mc_inc(ff01::1)
ipv6_dev_mc_inc(ff02::1)
ipv6_dev_mc_inc(ff02::2)

addrconf_notify(NETDEV_UP)
addrconf_dev_config
/* Alas, we support only Ethernet autoconfiguration. */
return;

addrconf_notify(NETDEV_DOWN)
addrconf_ifdown
ipv6_mc_down
igmp6_group_dropped(ff02::2)
mld_add_delrec(ff02::2)
igmp6_group_dropped(ff02::1)
igmp6_group_dropped(ff01::1)

After investigating, I can't found a rule to disable multicast on
non-Ethernet interface. In RFC2460, the link could be Ethernet, PPP, ATM,
tunnels, etc. In IPv4, it doesn't check the dev type when calls ip_mc_up()
in inetdev_event(). Even for IPv6, we don't check the dev type and call
ipv6_add_dev(), ipv6_dev_mc_inc() after register device.

So I think it's OK to fix this memory consumer by calling ipv6_mc_up() for
non-Ethernet interface.

v2: Also check IFF_MULTICAST flag to make sure the interface supports
    multicast

Reported-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Fixes: 74235a25c673 ("[IPV6] addrconf: Fix IPv6 on tuntap tunnels")
Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet_diag: return classid for all socket types

[ Upstream commit 83f73c5bb7b9a9135173f0ba2b1aa00c06664ff9 ]

In commit 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and
fallback to priority") croup classid reporting was fixed. But this works
only for TCP sockets because for other socket types icsk parameter can
be NULL and classid code path is skipped. This change moves classid
handling to inet_diag_msg_attrs_fill() function.

Also inet_diag_msg_attrs_size() helper was added and addends in
nlmsg_new() were reordered to save order from inet_sk_diag_fill().

Fixes: 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority")
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gre: fix uninit-value in __iptunnel_pull_header

[ Upstream commit 17c25cafd4d3e74c83dce56b158843b19c40b414 ]

syzbot found an interesting case of the kernel reading
an uninit-value [1]

Problem is in the handling of ETH_P_WCCP in gre_parse_header()

We look at the byte following GRE options to eventually decide
if the options are four bytes longer.

Use skb_header_pointer() to not pull bytes if we found
that no more bytes were needed.

All callers of gre_parse_header() are properly using pskb_may_pull()
anyway before proceeding to next header.

[1]
BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2303 [inline]
BUG: KMSAN: uninit-value in __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94
CPU: 1 PID: 11784 Comm: syz-executor940 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 pskb_may_pull include/linux/skbuff.h:2303 [inline]
 __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94
 iptunnel_pull_header include/net/ip_tunnels.h:411 [inline]
 gre_rcv+0x15e/0x19c0 net/ipv6/ip6_gre.c:606
 ip6_protocol_deliver_rcu+0x181b/0x22c0 net/ipv6/ip6_input.c:432
 ip6_input_finish net/ipv6/ip6_input.c:473 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ip6_input net/ipv6/ip6_input.c:482 [inline]
 ip6_mc_input+0xdf2/0x1460 net/ipv6/ip6_input.c:576
 dst_input include/net/dst.h:442 [inline]
 ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:306
 __netif_receive_skb_one_core net/core/dev.c:5198 [inline]
 __netif_receive_skb net/core/dev.c:5312 [inline]
 netif_receive_skb_internal net/core/dev.c:5402 [inline]
 netif_receive_skb+0x66b/0xf20 net/core/dev.c:5461
 tun_rx_batched include/linux/skbuff.h:4321 [inline]
 tun_get_user+0x6aef/0x6f60 drivers/net/tun.c:1997
 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026
 call_write_iter include/linux/fs.h:1901 [inline]
 new_sync_write fs/read_write.c:483 [inline]
 __vfs_write+0xa5a/0xca0 fs/read_write.c:496
 vfs_write+0x44a/0x8f0 fs/read_write.c:558
 ksys_write+0x267/0x450 fs/read_write.c:611
 __do_sys_write fs/read_write.c:623 [inline]
 __se_sys_write fs/read_write.c:620 [inline]
 __ia32_sys_write+0xdb/0x120 fs/read_write.c:620
 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
 do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410
 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f62d99
Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000fffedb2c EFLAGS: 00000217 ORIG_RAX: 0000000000000004
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020002580
RDX: 0000000000000fca RSI: 0000000000000036 RDI: 0000000000000004
RBP: 0000000000008914 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82
 slab_alloc_node mm/slub.c:2793 [inline]
 __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401
 __kmalloc_reserve net/core/skbuff.c:142 [inline]
 __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210
 alloc_skb include/linux/skbuff.h:1051 [inline]
 alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766
 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242
 tun_alloc_skb drivers/net/tun.c:1529 [inline]
 tun_get_user+0x10ae/0x6f60 drivers/net/tun.c:1843
 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026
 call_write_iter include/linux/fs.h:1901 [inline]
 new_sync_write fs/read_write.c:483 [inline]
 __vfs_write+0xa5a/0xca0 fs/read_write.c:496
 vfs_write+0x44a/0x8f0 fs/read_write.c:558
 ksys_write+0x267/0x450 fs/read_write.c:611
 __do_sys_write fs/read_write.c:623 [inline]
 __se_sys_write fs/read_write.c:620 [inline]
 __ia32_sys_write+0xdb/0x120 fs/read_write.c:620
 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
 do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410
 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139

Fixes: 95f5c64c3c13 ("gre: Move utility functions to common headers")
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup, netclassid: periodically release file_lock on classid updating

[ Upstream commit 018d26fcd12a75fb9b5fe233762aa3f2f0854b88 ]

In our production environment we have faced with problem that updating
classid in cgroup with heavy tasks cause long freeze of the file tables
in this tasks. By heavy tasks we understand tasks with many threads and
opened sockets (e.g. balancers). This freeze leads to an increase number
of client timeouts.

This patch implements following logic to fix this issue:
аfter iterating 1000 file descriptors file table lock will be released
thus providing a time gap for socket creation/deletion.

Now update is non atomic and socket may be skipped using calls:

dup2(oldfd, newfd);
close(oldfd);

But this case is not typical. Moreover before this patch skip is possible
too by hiding socket fd in unix socket buffer.

New sockets will be allocated with updated classid because cgroup state
is updated before start of the file descriptors iteration.

So in common cases this patch has no side effects.

Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: Avoid multiple suspends

commit 503ba7c6961034ff0047707685644cad9287c226 upstream.

It is currently possible for a PHY device to be suspended as part of a
network device driver's suspend call while it is still being attached to
that net_device, either via phy_suspend() or implicitly via phy_stop().

Later on, when the MDIO bus controller get suspended, we would attempt
to suspend again the PHY because it is still attached to a network
device.

This is both a waste of time and creates an opportunity for improper
clock/power management bugs to creep in.

Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: Revert toggling reset changes.

commit 7b566f70e1bf65b189b66eb3de6f431c30f7dff2 upstream.

This reverts:

ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached")
8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not  attached")

Andrew Lunn informs me that there are alternative efforts
underway to fix this more properly.

Signed-off-by: David S. Miller <davem@davemloft.net>
[just take the ef1b5bf506b1 revert - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.110

KVM: SVM: fix up incorrect backport

When I backported 52918ed5fcf0 ("KVM: SVM: Override default MMIO mask if
memory encryption is enabled") to 4.19 (which resulted in commit
a4e761c9f63a ("KVM: SVM: Override default MMIO mask if memory encryption
is enabled")), I messed up the call to kvm_mmu_set_mmio_spte_mask()

Fix that here now.

Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.109

scsi: pm80xx: Fixed kernel panic during error recovery for SATA drive

commit 196ba6629cf95e51403337235d09742fcdc3febd upstream.

Disabling the SATA drive interface cause kernel panic. When the drive
Interface is disabled, device should be deregistered after aborting all
pending I/Os. Also changed the port recovery timeout to 10000 ms for
PM8006 controller.

Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: fix a deadlock due to offloading to an incorrect workqueue

commit 53770f0ec5fd417429775ba006bc4abe14002335 upstream.

If we need to perform synchronous I/O in dm_integrity_map_continue(),
we must make sure that we are not in the map function - in order to
avoid the deadlock due to bio queuing in generic_make_request. To
avoid the deadlock, we offload the request to metadata_wq.

However, metadata_wq also processes metadata updates for write requests.
If there are too many requests that get offloaded to metadata_wq at the
beginning of dm_integrity_map_continue, the workqueue metadata_wq
becomes clogged and the system is incapable of processing any metadata
updates.

This causes a deadlock because all the requests that need to do metadata
updates wait for metadata_wq to proceed and metadata_wq waits inside
wait_and_add_new_range until some existing request releases its range
lock (which doesn't happen because the range lock is released after
metadata update).

In order to fix the deadlock, we create a new workqueue offload_wq and
offload requests to it - so that processing of offload_wq is independent
from processing of metadata_wq.

Fixes: 7eada909bfd7 ("dm: add integrity target")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/x86: Handle by-ref arguments covering multiple pages in mixed mode

commit 8319e9d5ad98ffccd19f35664382c73cea216193 upstream.

The mixed mode runtime wrappers are fragile when it comes to how the
memory referred to by its pointer arguments are laid out in memory, due
to the fact that it translates these addresses to physical addresses that
the runtime services can dereference when running in 1:1 mode. Since
vmalloc'ed pages (including the vmap'ed stack) are not contiguous in the
physical address space, this scheme only works if the referenced memory
objects do not cross page boundaries.

Currently, the mixed mode runtime service wrappers require that all by-ref
arguments that live in the vmalloc space have a size that is a power of 2,
and are aligned to that same value. While this is a sensible way to
construct an object that is guaranteed not to cross a page boundary, it is
overly strict when it comes to checking whether a given object violates
this requirement, as we can simply take the physical address of the first
and the last byte, and verify that they point into the same physical page.

When this check fails, we emit a WARN(), but then simply proceed with the
call, which could cause data corruption if the next physical page belongs
to a mapping that is entirely unrelated.

Given that with vmap'ed stacks, this condition is much more likely to
trigger, let's relax the condition a bit, but fail the runtime service
call if it does trigger.

Fixes: f6697df36bdf0bf7 ("x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200221084849.26878-4-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/x86: Align GUIDs to their size in the mixed mode runtime wrapper

commit 63056e8b5ebf41d52170e9f5ba1fc83d1855278c upstream.

Hans reports that his mixed mode systems running v5.6-rc1 kernels hit
the WARN_ON() in virt_to_phys_or_null_size(), caused by the fact that
efi_guid_t objects on the vmap'ed stack happen to be misaligned with
respect to their sizes. As a quick (i.e., backportable) fix, copy GUID
pointer arguments to the local stack into a buffer that is naturally
aligned to its size, so that it is guaranteed to cover only one
physical page.

Note that on x86, we cannot rely on the stack pointer being aligned
the way the compiler expects, so we need to allocate an 8-byte aligned
buffer of sufficient size, and copy the GUID into that buffer at an
offset that is aligned to 16 bytes.

Fixes: f6697df36bdf0bf7 ("x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200221084849.26878-2-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems

commit fc37a1632d40c80c067eb1bc235139f5867a2667 upstream.

PowerVM systems running compatibility mode on a few Power8 revisions are
still vulnerable to the hardware defect that loses PMU exceptions arriving
prior to a context switch.

The software fix for this issue is enabled through the CPU_FTR_PMAO_BUG
cpu_feature bit, nevertheless this bit also needs to be set for PowerVM
compatibility mode systems.

Fixes: 68f2f0d431d9ea4 ("powerpc: Add a cpu feature CPU_FTR_PMAO_BUG")
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200227134715.9715-1-desnesn@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()

commit 36d5d22090d13fd3a7a8c9663a711cbe6970aac8 upstream.

The caller is already holding the lock so this will deadlock.

Fixes: 0b58828c923e ("DMAENGINE: COH 901 318 remove irq counting")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200217144050.3i4ymbytogod4ijn@kili.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()

commit 44f2f882909fedfc3a56e4b90026910456019743 upstream.

This is only called from adt7462_update_device().  The caller expects it
to return zero on error.  I fixed a similar issue earlier in commit
a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0")
but I missed this one.

Fixes: c0b4e3ab0c76 ("adt7462: new hwmon driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200303101608.kqjwfcazu2ylhi2a@kili.mountain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx7-colibri: Fix frequency for sd/mmc

commit 2773fe1d31c42ffae2a9cb9a6055d99dd86e2fee upstream.

SD/MMC on Colibri iMX7S/D modules successfully support
200Mhz frequency in HS200 mode.

Removing the unnecessary max-frequency limit significantly
increases the performance:

== before fix ====
root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0
/dev/mmcblk0:
 Timing buffered disk reads: 252 MB in  3.02 seconds =  83.54 MB/sec
==================

=== after fix ====
root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0
/dev/mmcblk0:
 Timing buffered disk reads: 408 MB in  3.00 seconds = 135.94 MB/sec
==================

Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: am437x-idk-evm: Fix incorrect OPP node names

commit 31623468be0bf57617b8057dcd335693935a9491 upstream.

The commit 337c6c9a69af ("ARM: dts: am437x-idk-evm: Disable
OPP50 for MPU") adjusts couple of OPP nodes defined in the
common am4372.dtsi file, but used outdated node names. This
results in these getting treated as new OPP nodes with missing
properties.

Fix this properly by using the correct node names as updated in
commit b9cb2ba71848 ("ARM: dts: Use - instead of @ for DT OPP
entries for TI SoCs").

Reported-by: Roger Quadros <rogerq@ti.com>
Fixes: 337c6c9a69af ("ARM: dts: am437x-idk-evm: Disable OPP50 for MPU")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx: build v7_cpu_resume() unconditionally

commit 512a928affd51c2dc631401e56ad5ee5d5dd68b6 upstream.

This function is not only needed by the platform suspend code, but is also
reused as the CPU resume function when the ARM cores can be powered down
completely in deep idle, which is the case on i.MX6SX and i.MX6UL(L).

Providing the static inline stub whenever CONFIG_SUSPEND is disabled means
that those platforms will hang on resume from cpuidle if suspend is disabled.

So there are two problems:

  - The static inline stub masks the linker error
  - The function is not available where needed

Fix both by just building the function unconditionally, when
CONFIG_SOC_IMX6 is enabled. The actual code is three instructions long,
so it's arguably ok to just leave it in for all i.MX6 kernel configurations.

Fixes: 05136f0897b5 ("ARM: imx: support arm power off in cpuidle for i.mx6sx")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1, qib: Ensure RCU is locked when accessing list

commit 817a68a6584aa08e323c64283fec5ded7be84759 upstream.

The packet handling function, specifically the iteration of the qp list
for mad packet processing misses locking RCU before running through the
list. Not only is this incorrect, but the list_for_each_entry_rcu() call
can not be called with a conditional check for lock dependency. Remedy
this by invoking the rcu lock and unlock around the critical section.

This brings MAD packet processing in line with what is done for non-MAD
packets.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20200225195445.140896.41873.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()

commit c14dfddbd869bf0c2bafb7ef260c41d9cebbcfec upstream.

The algorithm pre-allocates a cm_id since allocation cannot be done while
holding the cm.lock spinlock, however it doesn't free it on one error
path, leading to a memory leak.

Fixes: 067b171b8679 ("IB/cm: Share listening CM IDs")
Link: https://lore.kernel.org/r/20200221152023.GA8680@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/iwcm: Fix iwcm work deallocation

commit 810dbc69087b08fd53e1cdd6c709f385bc2921ad upstream.

The dealloc_work_entries() function must update the work_free_list pointer
while freeing its entries, since potentially called again on same list. A
second iteration of the work list caused system crash. This happens, if
work allocation fails during cma_iw_listen() and free_cm_id() tries to
free the list again during cleanup.

Fixes: 922a8e9fb2e0 ("RDMA: iWARP Connection Manager.")
Link: https://lore.kernel.org/r/20200302181614.17042-1-bmt@zurich.ibm.com
Reported-by: syzbot+cb0c054eabfba4342146@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6: phycore-som: fix emmc supply

commit eb0bbba7636b9fc81939d6087a5fe575e150c95a upstream.

Currently the vmmc is supplied by the 1.8V pmic rail but this is wrong.
The default module behaviour is to power VCCQ and VCC by the 3.3V power
rail. Optional the user can connect the VCCQ to the pmic 1.8V emmc
power rail using a solder jumper.

Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval

commit 46b7edf1c7b7c91004c4db2c355cbd033f2385f9 upstream.

I've noticed that when writing data to the modem the writes can time out
at some point eventually. Looks like kicking the modem idle GPIO every
600 ms instead of once a second fixes the issue. Note that this rate is
different from our runtime PM autosuspend rate MDM6600_MODEM_IDLE_DELAY_MS
that we still want to keep at 1 second, so let's add a separate define for
PHY_MDM6600_IDLE_KICK_MS.

Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling

commit be4e3c737eebd75815633f4b8fd766defaf0f1fc upstream.

We have an interrupt handler for the wake-up GPIO pin, but we're missing
the code to wake-up the system. This can cause timeouts receiving data
for the UART that shares the wake-up GPIO pin with the USB PHY.

All we need to do is just wake the system and kick the autosuspend
timeout to fix the issue.

Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: de2/de3: Remove unsupported VI layer formats

commit a4769905f0ae32cae4f096f646ab03b8b4794c74 upstream.

YUV444 and YVU444 are planar formats, but HW format RGB888 is packed.
This means that those two mappings were never correct. Remove them.

Fixes: 60a3dcf96aa8 ("drm/sun4i: Add DE2 definitions for YUV formats")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: Fix DE2 VI layer format support

commit 20896ef137340e9426cf322606f764452f5eb960 upstream.

DE2 VI layer doesn't support blending which means alpha channel is
ignored. Replace all formats with alpha with "don't care" (X) channel.

Fixes: 7480ba4d7571 ("drm/sun4i: Add support for DE2 VI planes")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-4-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dapm: Correct DAPM handling of active widgets during shutdown

commit 9b3193089e77d3b59b045146ff1c770dd899acb1 upstream.

commit c2caa4da46a4 ("ASoC: Fix widget powerdown on shutdown") added a
set of the power state during snd_soc_dapm_shutdown to ensure the
widgets powered off. However, when commit 39eb5fd13dff
("ASoC: dapm: Delay w->power update until the changes are written")
added the new_power member of the widget structure, to differentiate
between the current power state and the target power state, it did not
update the shutdown to use the new_power member.

As new_power has not updated it will be left in the state set by the
last DAPM sequence, ie. 1 for active widgets. So as the DAPM sequence
for the shutdown proceeds it will turn the widgets on (despite them
already being on) rather than turning them off.

Fixes: 39eb5fd13dff ("ASoC: dapm: Delay w->power update until the changes are written")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200228153145.21013-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path

commit ac0a68997935c4acb92eaae5ad8982e0bb432d56 upstream.

When we get a clock error during probe we have to call
regulator_bulk_disable before bailing out, otherwise we trigger
a warning in regulator_put.

Fix this by using "goto err" like in the error cases above.

Fixes: 5a3af1293194d ("ASoC: pcm512x: Add PCM512x driver")
Signed-off-by: Matthias Reichl <hias@horus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200220202956.29233-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: pcm: Fix possible buffer overflow in dpcm state sysfs output

commit 6c89ffea60aa3b2a33ae7987de1e84bfb89e4c9e upstream.

dpcm_show_state() invokes multiple snprintf() calls to concatenate
formatted strings on the fixed size buffer.  The usage of snprintf()
is supposed for avoiding the buffer overflow, but it doesn't work as
expected because snprintf() doesn't return the actual output size but
the size to be written.

Fix this bug by replacing all snprintf() calls with scnprintf()
calls.

Fixes: f86dcef87b77 ("ASoC: dpcm: Add debugFS support for DPCM")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: imx-sdma: remove dma_slave_config direction usage and leave sdma_event_enable()

[ Upstream commit 107d06441b709d31ce592535086992799ee51e17 ]

dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed

ENBLn bit should be set before any dma request triggered, please
refer to the below information from i.mx6sololite RM. Otherwise,
spi/uart test will be fail because there is dma request from tx
fifo always before dmaengine_prep_slave_sg() in where ENBLn set
and violate the below rule.

https://www.nxp.com/docs/en/reference-manual/IMX6SLRM.pdf:

40.8.28 Channel Enable RAM (SDMAARM_CHNENBLn)
"It is thus essential for the Arm platform to program them before
any DMA request is triggered to the SDMA, otherwise an unpredictable
combination of channels may be started".

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
[vkoul: sqashed patch from Robin into direction change]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: intel: skl: Fix possible buffer overflow in debug outputs

commit 549cd0ba04dcfe340c349cd983bd440480fae8ee upstream.

The debugfs output of intel skl driver writes strings with multiple
snprintf() calls with the fixed size.  This was supposed to avoid the
buffer overflow but actually it still would, because snprintf()
returns the expected size to be output, not the actual output size.

Fix it by replacing snprintf() calls with scnprintf().

Fixes: d14700a01f91 ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: intel: skl: Fix pin debug prints

commit 64bbacc5f08c01954890981c63de744df1f29a30 upstream.

skl_print_pins() loops over all given pins but it overwrites the text
at the very same position while increasing the returned length.
Fix this to show the all pin contents properly.

Fixes: d14700a01f91 ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Fix memleak in soc_tplg_manifest_load()

commit 242c46c023610dbc0213fc8fb6b71eb836bc5d95 upstream.

In case of ABI version mismatch, _manifest needs to be freed as
it is just a copy of the original topology manifest. However, if
a driver manifest handler is defined, that would get executed and
the cleanup is never reached. Fix that by getting the return status
of manifest() instead of returning directly.

Fixes: 583958fa2e52 ("ASoC: topology: Make manifest backward compatible from ABI v4")
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Link: https://lore.kernel.org/r/20200207185325.22320-3-dragos_tarcatu@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Fix memleak in soc_tplg_link_elems_load()

commit 2b2d5c4db732c027a14987cfccf767dac1b45170 upstream.

If soc_tplg_link_config() fails, _link needs to be freed in case of
topology ABI version mismatch. However the current code is returning
directly and ends up leaking memory in this case.
This patch fixes that.

Fixes: 593d9e52f9bb ("ASoC: topology: Add support to configure existing physical DAI links")
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Link: https://lore.kernel.org/r/20200207185325.22320-2-dragos_tarcatu@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: bcm63xx-hsspi: Really keep pll clk enabled

commit 51bddd4501bc414b8b1e8f4d096b4a5304068169 upstream.

The purpose of commit 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled")
was to keep the pll clk enabled through the lifetime of the device.

In order to do that, some 'clk_prepare_enable()'/'clk_disable_unprepare()'
calls have been added in the error handling path of the probe function, in
the remove function and in the suspend and resume functions.

However, a 'clk_disable_unprepare()' call has been unfortunately left in
the probe function. So the commit seems to be more or less a no-op.

Axe it now, so that the pll clk is left enabled through the lifetime of
the device, as described in the commit.

Fixes: 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20200228213838.7124-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: ls1021a: Restore MDIO compatible to gianfar

commit 7155c44624d061692b4c13aa8343f119c67d4fc0 upstream.

The difference between "fsl,etsec2-mdio" and "gianfar" has to do with
the .get_tbipa function, which calculates the address of the TBIPA
register automatically, if not explicitly specified. [ see
drivers/net/ethernet/freescale/fsl_pq_mdio.c ]. On LS1021A, the TBIPA
register is at offset 0x30 within the port register block, which is what
the "gianfar" method of calculating addresses actually does.

Luckily, the bad "compatible" is inconsequential for ls1021a.dtsi,
because the TBIPA register is explicitly specified via the second "reg"
(<0x0 0x2d10030 0x0 0x4>), so the "get_tbipa" function is dead code.
Nonetheless it's good to restore it to its correct value.

Background discussion:
https://www.spinics.net/lists/stable/msg361156.html

Fixes: c7861adbe37f ("ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm writecache: verify watermark during resume

commit 41c526c5af46d4c4dab7f72c99000b7fac0b9702 upstream.

Verify the watermark upon resume - so that if the target is reloaded
with lower watermark, it will start the cleanup process immediately.

Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: report suspended device during destroy

commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 upstream.

The function dm_suspended returns true if the target is suspended.
However, when the target is being suspended during unload, it returns
false.

An example where this is a problem: the test "!dm_suspended(wc->ti)" in
writecache_writeback is not sufficient, because dm_suspended returns
zero while writecache_suspend is in progress.  As is, without an
enhanced dm_suspended, simply switching from flush_workqueue to
drain_workqueue still emits warnings:
workqueue writecache-writeback: drain_workqueue() isn't complete after 10 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 100 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 200 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 300 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 400 tries

writecache_suspend calls flush_workqueue(wc->writeback_wq) - this function
flushes the current work. However, the workqueue may re-queue itself and
flush_workqueue doesn't wait for re-queued works to finish. Because of
this - the function writecache_writeback continues execution after the
device was suspended and then concurrently with writecache_dtr, causing
a crash in writecache_writeback.

We must use drain_workqueue - that waits until the work and all re-queued
works finish.

As a prereq for switching to drain_workqueue, this commit fixes
dm_suspended to return true after the presuspend hook and before the
postsuspend hook - just like during a normal suspend. It allows
simplifying the dm-integrity and dm-writecache targets so that they
don't have to maintain suspended flags on their own.

With this change use of drain_workqueue() can be used effectively.  This
change was tested with the lvm2 testsuite and cryptsetup testsuite and
the are no regressions.

Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Reported-by: Corey Marthaler <cmarthal@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: fix a crash due to incorrect work item cancelling

commit 7cdf6a0aae1cccf5167f3f04ecddcf648b78e289 upstream.

The crash can be reproduced by running the lvm2 testsuite test
lvconvert-thin-external-cache.sh for several minutes, e.g.:
  while :; do make check T=shell/lvconvert-thin-external-cache.sh; done

The crash happens in this call chain:
do_waker -> policy_tick -> smq_tick -> end_hotspot_period -> clear_bitset
-> memset -> __memset -- which accesses an invalid pointer in the vmalloc
area.

The work entry on the workqueue is executed even after the bitmap was
freed. The problem is that cancel_delayed_work doesn't wait for the
running work item to finish, so the work item can continue running and
re-submitting itself even after cache_postsuspend. In order to make sure
that the work item won't be running, we must use cancel_delayed_work_sync.

Also, change flush_workqueue to drain_workqueue, so that if some work item
submits itself or another work item, we are properly waiting for both of
them.

Fixes: c6b4fcbad044 ("dm: add cache target")
Cc: stable@vger.kernel.org # v3.9
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list

commit c33ee1301c393a241d6424e36eff1071811b1064 upstream.

The interrupt handler puts a half-completed DMA descriptor on a free list
and then schedules tasklet to process bottom half of the descriptor that
executes client's callback, this creates possibility to pick up the busy
descriptor from the free list. Thus, let's disallow descriptor's re-use
until it is fully processed.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200209163356.6439-3-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: tegra-apb: Fix use-after-free

commit 94788af4ed039476ff3527b0e6a12c1dc42cb022 upstream.

I was doing some experiments with I2C and noticed that Tegra APB DMA
driver crashes sometime after I2C DMA transfer termination. The crash
happens because tegra_dma_terminate_all() bails out immediately if pending
list is empty, and thus, it doesn't release the half-completed descriptors
which are getting re-used before ISR tasklet kicks-in.

 tegra-i2c 7000c400.i2c: DMA transfer timeout
 elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac
 list_del corruption, ddbaac44->next is LIST_POISON1 (00000100)
 Modules linked in:
 CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty #538
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events_freezable_power_ thermal_zone_device_check
 [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14)
 [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94)
 [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4)
 [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78)
 [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac)
 [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154)
 [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c)
 [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8)
 [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98)
 [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80)
 [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c)
 [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94)
 Exception stack(0xde2ebb90 to 0xde2ebbd8)

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200209163356.6439-2-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pkeys: Manually set X86_FEATURE_OSPKE to preserve existing changes

commit 735a6dd02222d8d070c7bb748f25895239ca8c92 upstream.

Explicitly set X86_FEATURE_OSPKE via set_cpu_cap() instead of calling
get_cpu_cap() to pull the feature bit from CPUID after enabling CR4.PKE.
Invoking get_cpu_cap() effectively wipes out any {set,clear}_cpu_cap()
changes that were made between this_cpu->c_init() and setup_pku(), as
all non-synthetic feature words are reinitialized from the CPU's CPUID
values.

Blasting away capability updates manifests most visibility when running
on a VMX capable CPU, but with VMX disabled by BIOS.  To indicate that
VMX is disabled, init_ia32_feat_ctl() clears X86_FEATURE_VMX, using
clear_cpu_cap() instead of setup_clear_cpu_cap() so that KVM can report
which CPU is misconfigured (KVM needs to probe every CPU anyways).
Restoring X86_FEATURE_VMX from CPUID causes KVM to think VMX is enabled,
ultimately leading to an unexpected #GP when KVM attempts to do VMXON.

Arguably, init_ia32_feat_ctl() should use setup_clear_cpu_cap() and let
KVM figure out a different way to report the misconfigured CPU, but VMX
is not the only feature bit that is affected, i.e. there is precedent
that tweaking feature bits via {set,clear}_cpu_cap() after ->c_init()
is expected to work.  Most notably, x86_init_rdrand()'s clearing of
X86_FEATURE_RDRAND when RDRAND malfunctions is also overwritten.

Fixes: 0697694564c8 ("x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU")
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200226231615.13664-1-sean.j.christopherson@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-mem2mem.c: fix broken links

commit 316e730f1d8bb029fe6cec2468fb2a50424485b3 upstream.

The topology that v4l2_m2m_register_media_controller() creates for a
processing block actually created a source-to-source link and a sink-to-sink
link instead of two source-to-sink links.

Unfortunately v4l2-compliance never checked for such bad links, so this
went unreported for quite some time.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca>
Cc: <stable@vger.kernel.org> # for v4.19 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: selection, push sel_lock up

commit e8c75a30a23c6ba63f4ef6895cbf41fd42f21aa2 upstream.

sel_lock cannot nest in the console lock. Thanks to syzkaller, the
kernel states firmly:

> WARNING: possible circular locking dependency detected
> 5.6.0-rc3-syzkaller #0 Not tainted
> ------------------------------------------------------
> syz-executor.4/20336 is trying to acquire lock:
> ffff8880a2e952a0 (&tty->termios_rwsem){++++}, at: tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
>
> but task is already holding lock:
> ffffffff89462e70 (sel_lock){+.+.}, at: paste_selection+0x118/0x470 drivers/tty/vt/selection.c:374
>
> which lock already depends on the new lock.
>
> the existing dependency chain (in reverse order) is:
>
> -> #2 (sel_lock){+.+.}:
>        mutex_lock_nested+0x1b/0x30 kernel/locking/mutex.c:1118
>        set_selection_kernel+0x3b8/0x18a0 drivers/tty/vt/selection.c:217
>        set_selection_user+0x63/0x80 drivers/tty/vt/selection.c:181
>        tioclinux+0x103/0x530 drivers/tty/vt/vt.c:3050
>        vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364

This is ioctl(TIOCL_SETSEL).
Locks held on the path: console_lock -> sel_lock

> -> #1 (console_lock){+.+.}:
>        console_lock+0x46/0x70 kernel/printk/printk.c:2289
>        con_flush_chars+0x50/0x650 drivers/tty/vt/vt.c:3223
>        n_tty_write+0xeae/0x1200 drivers/tty/n_tty.c:2350
>        do_tty_write drivers/tty/tty_io.c:962 [inline]
>        tty_write+0x5a1/0x950 drivers/tty/tty_io.c:1046

This is write().
Locks held on the path: termios_rwsem -> console_lock

> -> #0 (&tty->termios_rwsem){++++}:
>        down_write+0x57/0x140 kernel/locking/rwsem.c:1534
>        tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
>        mkiss_receive_buf+0x12aa/0x1340 drivers/net/hamradio/mkiss.c:902
>        tty_ldisc_receive_buf+0x12f/0x170 drivers/tty/tty_buffer.c:465
>        paste_selection+0x346/0x470 drivers/tty/vt/selection.c:389
>        tioclinux+0x121/0x530 drivers/tty/vt/vt.c:3055
>        vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364

This is ioctl(TIOCL_PASTESEL).
Locks held on the path: sel_lock -> termios_rwsem

> other info that might help us debug this:
>
> Chain exists of:
>   &tty->termios_rwsem --> console_lock --> sel_lock

Clearly. From the above, we have:
 console_lock -> sel_lock
 sel_lock -> termios_rwsem
 termios_rwsem -> console_lock

Fix this by reversing the console_lock -> sel_lock dependency in
ioctl(TIOCL_SETSEL). First, lock sel_lock, then console_lock.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: syzbot+26183d9746e62da329b8@syzkaller.appspotmail.com
Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200228115406.5735-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: selection, push console lock down

commit 4b70dd57a15d2f4685ac6e38056bad93e81e982f upstream.

We need to nest the console lock in sel_lock, so we have to push it down
a bit. Fortunately, the callers of set_selection_* just lock the console
lock around the function call. So moving it down is easy.

In the next patch, we switch the order.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200228115406.5735-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: selection, close sel_buffer race

commit 07e6124a1a46b4b5a9b3cacc0c306b50da87abf5 upstream.

syzkaller reported this UAF:
BUG: KASAN: use-after-free in n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741
Read of size 1 at addr ffff8880089e40e9 by task syz-executor.1/13184

CPU: 0 PID: 13184 Comm: syz-executor.1 Not tainted 5.4.7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
...
 kasan_report+0xe/0x20 mm/kasan/common.c:634
 n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741
 tty_ldisc_receive_buf+0xac/0x190 drivers/tty/tty_buffer.c:461
 paste_selection+0x297/0x400 drivers/tty/vt/selection.c:372
 tioclinux+0x20d/0x4e0 drivers/tty/vt/vt.c:3044
 vt_ioctl+0x1bcf/0x28d0 drivers/tty/vt/vt_ioctl.c:364
 tty_ioctl+0x525/0x15a0 drivers/tty/tty_io.c:2657
 vfs_ioctl fs/ioctl.c:47 [inline]

It is due to a race between parallel paste_selection (TIOCL_PASTESEL)
and set_selection_user (TIOCL_SETSEL) invocations. One uses sel_buffer,
while the other frees it and reallocates a new one for another
selection. Add a mutex to close this race.

The mutex takes care properly of sel_buffer and sel_buffer_lth only. The
other selection global variables (like sel_start, sel_end, and sel_cons)
are protected only in set_selection_user. The other functions need quite
some more work to close the races of the variables there. This is going
to happen later.

This likely fixes (I am unsure as there is no reproducer provided) bug
206361 too. It was marked as CVE-2020-8648.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: syzbot+59997e8d5cbdc486e6f6@syzkaller.appspotmail.com
References: https://bugzilla.kernel.org/show_bug.cgi?id=206361
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200210081131.23572-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_exar: add support for ACCES cards

commit 10c5ccc3c6d32f3d7d6c07de1d3f0f4b52f3e3ab upstream.

Add ACCES VIDs and PIDs that use the Exar chips

Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200305140504.22237-1-jay.dolan@accesio.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty:serial:mvebu-uart:fix a wrong return

commit 4a3e208474204e879d22a310b244cb2f39e5b1f8 upstream.

in this place, the function should return a
negative value and the PTR_ERR already returns
a negative,so return -PTR_ERR() is wrong.

Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200305013823.20976-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: dts: dra76x: Fix mmc3 max-frequency

commit fa63c0039787b8fbacf4d6a51e3ff44288f5b90b upstream.

dra76x is not affected by i887 which requires mmc3 node to be limited to
a max frequency of 64 MHz. Fix this by overwriting the correct value in
the the dra76 specific dtsi.

Fixes: 895bd4b3e5ec ("ARM: dts: Add support for dra76-evm")
Cc: stable@vger.kernel.org
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fat: fix uninit-memory access for partial initialized inode

commit bc87302a093f0eab45cd4e250c2021299f712ec6 upstream.

When get an error in the middle of reading an inode, some fields in the
inode might be still not initialized.  And then the evict_inode path may
access those fields via iput().

To fix, this makes sure that inode fields are initialized.

Reported-by: syzbot+9d82b8de2992579da5d0@syzkaller.appspotmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/871rqnreqx.fsf@mail.parknet.co.jp
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix possible PMD dirty bit lost in set_pmd_migration_entry()

commit 8a8683ad9ba48b4b52a57f013513d1635c1ca5c4 upstream.

In set_pmd_migration_entry(), pmdp_invalidate() is used to change PMD
atomically.  But the PMD is read before that with an ordinary memory
reading.  If the THP (transparent huge page) is written between the PMD
reading and pmdp_invalidate(), the PMD dirty bit may be lost, and cause
data corruption.  The race window is quite small, but still possible in
theory, so need to be fixed.

The race is fixed via using the return value of pmdp_invalidate() to get
the original content of PMD, which is a read/modify/write atomic
operation.  So no THP writing can occur in between.

The race has been introduced when the THP migration support is added in
the commit 616b8371539a ("mm: thp: enable thp migration in generic path").
But this fix depends on the commit d52605d7cb30 ("mm: do not lose dirty
and accessed bits in pmdp_invalidate()").  So it's easy to be backported
after v4.16.  But the race window is really small, so it may be fine not
to backport the fix at all.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Link: http://lkml.kernel.org/r/20200220075220.2327056-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking page tables prot_numa

commit 8b272b3cbbb50a6a8e62d8a15affd473a788e184 upstream.

: A user reported a bug against a distribution kernel while running a
: proprietary workload described as "memory intensive that is not swapping"
: that is expected to apply to mainline kernels.  The workload is
: read/write/modifying ranges of memory and checking the contents.  They
: reported that within a few hours that a bad PMD would be reported followed
: by a memory corruption where expected data was all zeros.  A partial
: report of the bad PMD looked like
:
:   [ 5195.338482] ../mm/pgtable-generic.c:33: bad pmd ffff8888157ba008(000002e0396009e2)
:   [ 5195.341184] ------------[ cut here ]------------
:   [ 5195.356880] kernel BUG at ../mm/pgtable-generic.c:35!
:   ....
:   [ 5195.410033] Call Trace:
:   [ 5195.410471]  [<ffffffff811bc75d>] change_protection_range+0x7dd/0x930
:   [ 5195.410716]  [<ffffffff811d4be8>] change_prot_numa+0x18/0x30
:   [ 5195.410918]  [<ffffffff810adefe>] task_numa_work+0x1fe/0x310
:   [ 5195.411200]  [<ffffffff81098322>] task_work_run+0x72/0x90
:   [ 5195.411246]  [<ffffffff81077139>] exit_to_usermode_loop+0x91/0xc2
:   [ 5195.411494]  [<ffffffff81003a51>] prepare_exit_to_usermode+0x31/0x40
:   [ 5195.411739]  [<ffffffff815e56af>] retint_user+0x8/0x10
:
: Decoding revealed that the PMD was a valid prot_numa PMD and the bad PMD
: was a false detection.  The bug does not trigger if automatic NUMA
: balancing or transparent huge pages is disabled.
:
: The bug is due a race in change_pmd_range between a pmd_trans_huge and
: pmd_nond_or_clear_bad check without any locks held.  During the
: pmd_trans_huge check, a parallel protection update under lock can have
: cleared the PMD and filled it with a prot_numa entry between the transhuge
: check and the pmd_none_or_clear_bad check.
:
: While this could be fixed with heavy locking, it's only necessary to make
: a copy of the PMD on the stack during change_pmd_range and avoid races.  A
: new helper is created for this as the check if quite subtle and the
: existing similar helpful is not suitable.  This passed 154 hours of
: testing (usually triggers between 20 minutes and 24 hours) without
: detecting bad PMDs or corruption.  A basic test of an autonuma-intensive
: workload showed no significant change in behaviour.

Although Mel withdrew the patch on the face of LKML comment
https://lkml.org/lkml/2017/4/10/922 the race window aforementioned is
still open, and we have reports of Linpack test reporting bad residuals
after the bad PMD warning is observed.  In addition to that, bad
rss-counter and non-zero pgtables assertions are triggered on mm teardown
for the task hitting the bad PMD.

 host kernel: mm/pgtable-generic.c:40: bad pmd 00000000b3152f68(8000000d2d2008e7)
 ....
 host kernel: BUG: Bad rss-counter state mm:00000000b583043d idx:1 val:512
 host kernel: BUG: non-zero pgtables_bytes on freeing mm: 4096

The issue is observed on a v4.18-based distribution kernel, but the race
window is expected to be applicable to mainline kernels, as well.

[akpm@linux-foundation.org: fix comment typo, per Rafael]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200216191800.22423-1-aquini@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vgacon: Fix a UAF in vgacon_invert_region

commit 513dc792d6060d5ef572e43852683097a8420f56 upstream.

When syzkaller tests, there is a UAF:
  BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr
    ffff880000100000
  Read of size 2 by task syz-executor.1/16489
  page:ffffea0000004000 count:0 mapcount:-127 mapping:          (null)
  index:0x0
  page flags: 0xfffff00000000()
  page dumped because: kasan: bad access detected
  CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
  Call Trace:
    [<ffffffffb119f309>] dump_stack+0x1e/0x20
    [<ffffffffb04af957>] kasan_report+0x577/0x950
    [<ffffffffb04ae652>] __asan_load2+0x62/0x80
    [<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110
    [<ffffffffb0a39d95>] invert_screen+0xe5/0x470
    [<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0
    [<ffffffffb0a3bfae>] tioclinux+0xee/0x490
    [<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670
    [<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10
    [<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40
    [<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170
    [<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27
    Memory state around the buggy address:
     ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     00 00
     ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00
     00 00 00
    >ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff
     ff ff ff

It can be reproduce in the linux mainline by the program:
  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <fcntl.h>
  #include <sys/types.h>
  #include <sys/stat.h>
  #include <sys/ioctl.h>
  #include <linux/vt.h>

  struct tiocl_selection {
    unsigned short xs;      /* X start */
    unsigned short ys;      /* Y start */
    unsigned short xe;      /* X end */
    unsigned short ye;      /* Y end */
    unsigned short sel_mode; /* selection mode */
  };

  #define TIOCL_SETSEL    2
  struct tiocl {
    unsigned char type;
    unsigned char pad;
    struct tiocl_selection sel;
  };

  int main()
  {
    int fd = 0;
    const char *dev = "/dev/char/4:1";

    struct vt_consize v = {0};
    struct tiocl tioc = {0};

    fd = open(dev, O_RDWR, 0);

    v.v_rows = 3346;
    ioctl(fd, VT_RESIZEX, &v);

    tioc.type = TIOCL_SETSEL;
    ioctl(fd, TIOCLINUX, &tioc);

    return 0;
  }

When resize the screen, update the 'vc->vc_size_row' to the new_row_size,
but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base'
for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe
smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc
the offset, it maybe larger than the vga_vram_size in vgacon driver, then
bad access.
Also, if set an larger screenbuf firstly, then set an more larger
screenbuf, when copy old_origin to new_origin, a bad access may happen.

So, If the screen size larger than vga_vram, resize screen should be
failed. This alse fix CVE-2020-8649 and CVE-2020-8647.

Linus pointed out that overflow checking seems absent. We're saved by
the existing bounds checks in vc_do_resize() with rather strict
limits:

if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW)
return -EINVAL;

Fixes: 0aec4867dca14 ("[PATCH] SVGATextMode fix")
Reference: CVE-2020-8647 and CVE-2020-8649
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[danvet: augment commit message to point out overflow safety]
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangxiaoxu5@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: port: do error out if usb_autopm_get_interface() fails

commit 1f8b39bc99a31759e97a0428a5c3f64802c1e61d upstream.

Reviewing a fresh portion of coverity defects in USB core
(specifically CID 1458999), Alan Stern noted below in [1]:

On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote:
 > A revised search finds line 997 in drivers/usb/core/hub.c and lines
 > 216, 269 in drivers/usb/core/port.c.  (I didn't try looking in any
 > other directories.)  AFAICT all three of these should check the
 > return value, although a error message in the kernel log probably
 > isn't needed.

Factor out the usb_port_runtime_{resume,suspend}() changes into a
standalone patch to allow conflict-free porting on top of stable v3.9+.

[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@iolanthe.rowland.org

Fixes: 971fcd492cebf5 ("usb: add runtime pm support for usb port device")
Cc: stable@vger.kernel.org # v3.9+
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200226175036.14946-3-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: hub: do error out if usb_autopm_get_interface() fails

commit 60e3f6e4ac5b0fda43dad01c32e09409ec710045 upstream.

Reviewing a fresh portion of coverity defects in USB core
(specifically CID 1458999), Alan Stern noted below in [1]:

On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote:
 > A revised search finds line 997 in drivers/usb/core/hub.c and lines
 > 216, 269 in drivers/usb/core/port.c.  (I didn't try looking in any
 > other directories.)  AFAICT all three of these should check the
 > return value, although a error message in the kernel log probably
 > isn't needed.

Factor out the usb_remove_device() change into a standalone patch to
allow conflict-free integration on top of the earliest stable branches.

[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@iolanthe.rowland.org

Fixes: 253e05724f9230 ("USB: add a "remove hardware" sysfs attribute")
Cc: stable@vger.kernel.org # v2.6.33+
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200226175036.14946-2-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: hub: fix unhandled return by employing a void function

commit 63d6d7ed475c53dc1cabdfedf63de1fd8dcd72ee upstream.

Address below Coverity complaint (Feb 25, 2020, 8:06 AM CET):

usb: dwc3: gadget: Update chain bit correctly when using sg list

commit dad2aff3e827b112f27fa5e6f2bf87a110067c3f upstream.

If scatter-gather operation is allowed, a large USB request is split
into multiple TRBs. For preparing TRBs for sg list, driver iterates
over the list and creates TRB for each sg and mark the chain bit to
false for the last sg. The current IOMMU driver is clubbing the list
of sgs which shares a page boundary into one and giving it to USB driver.
With this the number of sgs mapped it not equal to the the number of sgs
passed. Because of this USB driver is not marking the chain bit to false
since it couldn't iterate to the last sg. This patch addresses this issue
by marking the chain bit to false if it is the last mapped sg.

At a practical level, this patch resolves USB transfer stalls
seen with adb on dwc3 based db845c, pixel3 and other qcom
hardware after functionfs gadget added scatter-gather support
around v4.20.

Credit also to Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
who implemented a very similar fix to this issue.

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Yang Fei <fei.yang@intel.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linux USB List <linux-usb@vger.kernel.org>
Cc: stable <stable@vger.kernel.org> #4.20+
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
[jstultz: Slight tweak to remove sg_is_last() usage, reworked
          commit message, minor comment tweak]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200302214443.55783-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: add NO_LPM quirk for Logitech Screen Share

commit b96ed52d781a2026d0c0daa5787c6f3d45415862 upstream.

LPM on the device appears to cause xHCI host controllers to claim
that there isn't enough bandwidth to support additional devices.

Signed-off-by: Dan Lazewatsky <dlaz@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://lore.kernel.org/r/20200226143438.1445-1-gustavo.padovan@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: storage: Add quirk for Samsung Fit flash

commit 86d92f5465958752481269348d474414dccb1552 upstream.

Current driver has 240 (USB2.0) and 2048 (USB3.0) as max_sectors,
e.g., /sys/bus/scsi/devices/0:0:0:0/max_sectors

If data access times out, driver error handling will issue a port
reset.
Sometimes Samsung Fit (090C:1000) flash disk will not respond to
later Set Address or Get Descriptor command.

Adding this quirk to limit max_sectors to 64 sectors to avoid issue
occurring.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1583158895-31342-1-git-send-email-jilin@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: don't leak -EAGAIN for stat() during reconnect

commit fc513fac56e1b626ae48a74d7551d9c35c50129e upstream.

If from cifs_revalidate_dentry_attr() the SMB2/QUERY_INFO call fails with an
error, such as STATUS_SESSION_EXPIRED, causing the session to be reconnected
it is possible we will leak -EAGAIN back to the application even for
system calls such as stat() where this is not a valid error.

Fix this by re-trying the operation from within cifs_revalidate_dentry_attr()
if cifs_get_inode_info*() returns -EAGAIN.

This fixes stat() and possibly also other system calls that uses
cifs_revalidate_dentry*().

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master

commit 0d45e86d2267d5bdf7bbb631499788da1c27ceb2 upstream.

The Gigabyte X570 Aorus Master motherboard with ALC1220 codec
requires a similar workaround for Clevo laptops to enforce the
DAC/mixer connection path. Set up a quirk entry for that.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200223092416.15016-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add Headset Mic supported

commit 78def224f59c05d00e815be946ec229719ccf377 upstream.

Dell desktop platform supported headset Mic.
Add pin verb to enable headset Mic.
This platform only support fixed type headset for Iphone type.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b9da28d772ef43088791b0f3675929e7@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: thunderx: workaround BGX TX Underflow issue

[ Upstream commit 971617c3b761c876d686a2188220a33898c90e99 ]

While it is not yet understood why a TX underflow can easily occur
for SGMII interfaces resulting in a TX wedge. It has been found that
disabling/re-enabling the LMAC resolves the issue.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Robert Jones <rjones@gateworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/xen: Distribute switch variables for initialization

[ Upstream commit 9038ec99ceb94fb8d93ade5e236b2928f0792c7c ]

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

arch/x86/xen/enlighten_pv.c: In function ‘xen_write_msr_safe’:
arch/x86/xen/enlighten_pv.c:904:12: warning: statement will never be executed [-Wswitch-unreachable]
  904 |   unsigned which;
      |            ^~~~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200220062318.69299-1-keescook@chromium.org
Reviewed-by: Juergen Gross <jgross@suse.com>
[boris: made @which an 'unsigned int']
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>