andy.hu [Thu, 17 Nov 2022 07:02:36 +0000 (07:02 +0000)]
Merge branch 'CR_2583_fix_usb_resume_hub_minda' into 'jh7110-5.15.y-devel'
CR_2583 USB: core: Fix bug in resuming hub's handling of wakeup requests
See merge request sdk/linux!600
andy.hu [Thu, 17 Nov 2022 06:53:09 +0000 (06:53 +0000)]
Merge branch 'CR_2588_515_watchdog_timeleft_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2588_515_watchdog_timeleft_Xingyu.Wu
See merge request sdk/linux!597
andy.hu [Thu, 17 Nov 2022 06:51:07 +0000 (06:51 +0000)]
Merge branch 'CR_2621_CPUIDLE_mason.huo' into 'jh7110-5.15.y-devel'
CR_2621 riscv: dts: Remove unsupported cpuidle state
See merge request sdk/linux!608
andy.hu [Thu, 17 Nov 2022 06:48:28 +0000 (06:48 +0000)]
Merge branch 'CR_2435_hibernation-for-main_5.15_vout_shengyang.chen' into 'jh7110-5.15.y-devel'
CR_2435: clk:starfive:vout:Add runtime and system pm && riscv:linux:drm: Add runtime and system pm
See merge request sdk/linux!596
Kevin.xie [Tue, 15 Nov 2022 09:27:32 +0000 (17:27 +0800)]
drivers: pci: Set PCIe PCI standard configuration ID.
Class - PCI-to-PCI bridge.
Revision - 2.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Kevin.xie [Tue, 15 Nov 2022 06:04:20 +0000 (14:04 +0800)]
v4l2_driver: vin: Add skip frames for isp control.
The duration of extra isp control skip frames are fixed to 1 second.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
ziv.xu [Tue, 15 Nov 2022 08:06:06 +0000 (16:06 +0800)]
starfive:defconfig: modify defconfig to enable qspi
modify defconfig to enable qspi
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Xingyu Wu [Thu, 10 Nov 2022 09:02:38 +0000 (17:02 +0800)]
drm:verisilicon:hdmi-audio:Adjust when to configure registers
Adjust when to configure registers before HDMI suspend.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Tue, 8 Nov 2022 14:04:07 +0000 (22:04 +0800)]
dma:dw:Add stg_axi clock and reset of noc_bus
Add 'JH7110_NOC_BUS_CLK_STG_AXI' clock and
'RSTN_U0_NOC_BUS_STG_AXI_N' reset.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
shengyang.chen [Wed, 9 Nov 2022 02:15:19 +0000 (10:15 +0800)]
riscv:linux:drm : fix vout pm bug
fix display problem of hdmi sys pm
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Fri, 4 Nov 2022 10:17:52 +0000 (18:17 +0800)]
riscv:linux:drm: fix double display bug
fix double display bug
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Fri, 4 Nov 2022 10:17:06 +0000 (18:17 +0800)]
linux:dts:starfive: remove some useless port of vout dts
fix double display bug
remove some useless port of vout dts
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Wed, 2 Nov 2022 03:35:47 +0000 (11:35 +0800)]
riscv:linux:drm: Add basic runtime and system pm support for vout
Add basic runtime and system pm support for vout
remove some useless clk/rst function and calling in vs_dc.c
improve vout driver structure
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Wed, 2 Nov 2022 03:34:32 +0000 (11:34 +0800)]
linux:dts:starfive: Add pm support for vout dts
Add pm support for vout dts
remove some useless port of vout dts
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
Xingyu Wu [Tue, 8 Nov 2022 13:53:31 +0000 (21:53 +0800)]
clk:starfive:vout:Add parent about disp_apb clk
Clock "u0_pclk_mux_func_pclk" is the parent of "disp_apb" clock.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Wed, 19 Oct 2022 09:06:17 +0000 (17:06 +0800)]
clk:starfive:vout:Add runtime and system pm
Add runtime and system pm in vout clock tree driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
ziv.xu [Thu, 10 Nov 2022 08:13:19 +0000 (16:13 +0800)]
spi-pl022-starfive.c: prompt warning when frequency does not surpport
prompt warning when frequency does not surpport
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
mason.huo [Fri, 11 Nov 2022 02:13:04 +0000 (10:13 +0800)]
riscv: dts: Remove unsupported cpuidle state
The cpuidle state1 is also implemented in sbi with
WFI C state, but it cause audio play failed.
Remove the cpuidle state1.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
Alan Stern [Sat, 1 Jan 2022 19:52:14 +0000 (14:52 -0500)]
USB: core: Fix bug in resuming hub's handling of wakeup requests
Bugzilla #213839 reports a 7-port hub that doesn't work properly when
devices are plugged into some of the ports; the kernel goes into an
unending disconnect/reinitialize loop as shown in the bug report.
This "7-port hub" comprises two four-port hubs with one plugged into
the other; the failures occur when a device is plugged into one of the
downstream hub's ports. (These hubs have other problems too. For
example, they bill themselves as USB-2.0 compliant but they only run
at full speed.)
It turns out that the failures are caused by bugs in both the kernel
and the hub. The hub's bug is that it reports a different
bmAttributes value in its configuration descriptor following a remote
wakeup (0xe0 before, 0xc0 after -- the wakeup-support bit has
changed).
The kernel's bug is inside the hub driver's resume handler. When
hub_activate() sees that one of the hub's downstream ports got a
wakeup request from a child device, it notes this fact by setting the
corresponding bit in the hub->change_bits variable. But this variable
is meant for connection changes, not wakeup events; setting it causes
the driver to believe the downstream port has been disconnected and
then connected again (in addition to having received a wakeup
request).
Because of this, the hub driver then tries to check whether the device
currently plugged into the downstream port is the same as the device
that had been attached there before. Normally this check succeeds and
wakeup handling continues with no harm done (which is why the bug
remained undetected until now). But with these dodgy hubs, the check
fails because the config descriptor has changed. This causes the hub
driver to reinitialize the child device, leading to the
disconnect/reinitialize loop described in the bug report.
The proper way to note reception of a downstream wakeup request is
to set a bit in the hub->event_bits variable instead of
hub->change_bits. That way the hub driver will realize that something
has happened to the port but will not think the port and child device
have been disconnected. This patch makes that change.
Cc: <stable@vger.kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YdCw7nSfWYPKWQoD@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: minda.chen <minda.chen@starfivetech.com>
Xingyu Wu [Wed, 9 Nov 2022 06:34:14 +0000 (14:34 +0800)]
watchdog: starfive: Get timeleft correctly
Use flag to count timeleft and the flag is base on
reading register instead of interrupt handler function.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Jianlong Huang [Thu, 10 Nov 2022 00:22:14 +0000 (08:22 +0800)]
Merge tag 'JH7110_515_SDK_v3.0.0-rc3' into vf2-515-devel
version JH7110_515_SDK_v3.0.0-rc3 for JH7110 EVB board
andy.hu [Wed, 9 Nov 2022 11:22:58 +0000 (11:22 +0000)]
Merge branch 'CR_2553_ytphy_515_samin.guo' into 'jh7110-5.15.y-devel'
CR_2553: 515: Use ytphy_link_change_notify to detect link changes by yt8521/YT8531.
See merge request sdk/linux!592
jianlong.huang [Wed, 9 Nov 2022 10:26:48 +0000 (10:26 +0000)]
Merge branch 'CR_2556_vf2_515_DRM_mipi_new_panel_keith.zhao' into 'vf2-515-devel'
800*1280屏幕 支持开机探测 解决默认状态为 connected 的问题
See merge request sbc/linux!47
Samin Guo [Fri, 4 Nov 2022 01:42:40 +0000 (09:42 +0800)]
net:phy:motorcomm: Fix the problem that phytool cannot be used by YT8531
phy_read_status should not judge the auto negotiation speed, which
will cause 0x1e to be frequently modified.
JH7110B In different speed modes, the tx_inverted needs to be
dynamically updated to match the timming.
known issue:
Function yt8521_read_status, it will be executed once per second.
Can read and write ext reg (0xa001/a002/a003). This may causes the ext value
read by the phytool always is 0.
$ phytool write eth0/0/0x1e 0xa001
$ phytool read eth0/0/0x1f
0000
To avoid this problem, you can read 0x1f as fast as possible after
writing 0x1e.
$ phytool write eth0/0/0x1e 0xa001; phytool read eth0/0/0x1f
0x8160
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
keith.zhao [Wed, 9 Nov 2022 02:43:13 +0000 (18:43 -0800)]
riscv:linux:vout:mipi
add 800*1280 I2C read to detect the status of connection
Signed-off-by: keith <keith.zhao@starfivetech.com>
Kevin.xie [Tue, 8 Nov 2022 08:37:45 +0000 (16:37 +0800)]
media: v4l2_driver: Supplement the missing runtime pm get ops on more than once stream_on cases.
For example, if we run stf_isp_ctrl & v4l2test at the same time,
s_stream for sensor will be called twice,
so that rpm should be got twice too.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Jianlong Huang [Thu, 3 Nov 2022 10:17:17 +0000 (18:17 +0800)]
Revert "dts:starfive:Disable spi"
Have fixed spi issue which lead to crash booting.
This reverts commit
bb1b47228930974ab386badc2544a2dbd49ddc18.
Jianlong Huang [Thu, 3 Nov 2022 10:13:30 +0000 (18:13 +0800)]
configs:Sync configs of jh7110
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
keith.zhao [Mon, 31 Oct 2022 09:51:53 +0000 (17:51 +0800)]
riscv:linux:vout:mipi
mipi dsi driver add 800*1280 panel : update panel driver code
Signed-off-by: keith <keith.zhao@starfivetech.com>
keith.zhao [Mon, 31 Oct 2022 09:50:48 +0000 (17:50 +0800)]
riscv:linux:vout:mipi
mipi dsi driver add 800*1280 panel: update dts and config
Signed-off-by: keith <keith.zhao@starfivetech.com>
Jianlong Huang [Mon, 31 Oct 2022 01:47:30 +0000 (09:47 +0800)]
configs:starfive:Default CPUFREQ governor ondemand
Change Default CPUFREQ governor to ondemand.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 31 Oct 2022 01:31:44 +0000 (09:31 +0800)]
regulator:axp1506:Remove regulator ALDO4
Fix bug, remove sdio_vdd and remove ALDO4 enum.
Which may cause cpu freq don't work.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 29 Oct 2022 13:16:07 +0000 (21:16 +0800)]
dts:starfive:Disable spi
System crash when booting due to pl022_runtime_suspend.
Next version will fix it.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 29 Oct 2022 06:45:27 +0000 (14:45 +0800)]
configs: enable CPU_FREQ
enable cpu freq function
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Samin Guo [Fri, 21 Oct 2022 09:28:39 +0000 (17:28 +0800)]
net:stmmac:dwc-qos: add support for external rmii_rtx clocks
JH7110A use external rmii_rtx clk for tx clk on 100M/10M mode.
Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com>
Jianlong Huang [Thu, 20 Oct 2022 01:23:51 +0000 (09:23 +0800)]
regulator:axp15060:Remove sdio vdd regulator
Visionfive2 emmc is default 1.8V, there is no need to controll the voltage.
Remove sdio_vdd node and code.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Tue, 18 Oct 2022 03:31:28 +0000 (11:31 +0800)]
configfs: Enable SND_SOC_STARFIVE_I2S
Support hdmi audio
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 17 Oct 2022 14:15:24 +0000 (22:15 +0800)]
arch:dts:starfive:Enable i2stx_4ch0 node
Add mclk_ext pin and enable i2stx_4ch0
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 17 Oct 2022 13:45:03 +0000 (21:45 +0800)]
riscv:dts:jh7110: Modify CMA reserved space to better support 2G DRAM
When the DDR is 2G (0x40000000-0xc0000000), it may cause address usage
problems.
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Samin Guo [Mon, 17 Oct 2022 10:59:39 +0000 (18:59 +0800)]
riscv:starfive:jh7110: change gmac0 tx delay to 0xa
0xa will better match gmac0 tx in 1000M
Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com>
Samin Guo [Wed, 12 Oct 2022 05:05:44 +0000 (13:05 +0800)]
dts:starfive:jh7110: set gmac phy tx_inverted for JH7110B+YT8531PHY.
JH7110B requires tx_inverted_10/100/1000 configuration, and different parameters
may be required in 10M/100M/1000M mode.
This parameter supports JH7110B+YT8531PHY by default. Other boards can
modify the parameters of the tx_inverted_10/100/1000 to obtain support.
Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com>
Jianlong Huang [Wed, 12 Oct 2022 02:00:10 +0000 (10:00 +0800)]
dts: starfive: Add A11 dts for vf2 version 1.1 board
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Tue, 27 Sep 2022 02:50:28 +0000 (10:50 +0800)]
dts: starfive: Enable gpio restart
Add gpio restart dts node
Enable gpio restart config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 24 Sep 2022 00:46:23 +0000 (08:46 +0800)]
dts: starfive: Enable usb device node
Sync jh7110 usb device node and enable
Sync jh7110 imx219 compatible name
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 24 Sep 2022 00:45:26 +0000 (08:45 +0800)]
configs: visionfive2: Enable usb device config
Sync jh7110 usb device config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 09:44:30 +0000 (17:44 +0800)]
config: Add led config
Enable led trigger heartbeat
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 09:43:13 +0000 (17:43 +0800)]
dts: starfive: Add led node
Add led node on dts file
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 06:54:44 +0000 (14:54 +0800)]
dts: starfive: Move wm8960 and ac108 node under i2c form dtsi file to wm8960/ac108 file
The default dts do not contain wm8960/ac108, move to the other file.
The booting of default dts do not have wrong log about wm8960/ac108
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 00:50:08 +0000 (08:50 +0800)]
dts: starfive: Replace stf to starfive
Forget to replace stf to starfive on dtbo file
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 15 Sep 2022 00:56:06 +0000 (08:56 +0800)]
dts: starfive: enhance SD card io Output Drive Strength
SD card gpio is generic gpio on visionfive2, the default output drive strength may be not enough, some sd card do not work.
So enhance the gpio output drive strength to max.
But on visionfive2, the sd card gpio is fixed 3.3V, there is no need to switch_voltage and not support uhs mode.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 15 Sep 2022 00:47:20 +0000 (08:47 +0800)]
dts: starfive: Replace sf to starfive
Because upstream requirement.
Replace sf to starfive.
Replace hdmi_output to rgb_output.
Replace encoder to dsi_output
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 1 Sep 2022 07:22:36 +0000 (15:22 +0800)]
dts: starfive: Add wm8960 and ac108 dts
Add wm8960 and ac108 dts base default dts
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 29 Aug 2022 00:57:59 +0000 (08:57 +0800)]
configs: starfive: sync jh7110 config to visionfive2
sync jh7110 config to visionfive2 about audio config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
mason.huo [Tue, 23 Aug 2022 03:44:09 +0000 (11:44 +0800)]
riscv: dts: Change the cpu_vdd_0p9 to cpu_vdd
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
jianlonghuang [Tue, 23 Aug 2022 01:13:07 +0000 (09:13 +0800)]
dts: starfive: Add ac108 dts config
Add ac108 dts
Signed-off-by: jianlonghuang <jianlong.huang@starfivetech.com>
Jianlong Huang [Wed, 17 Aug 2022 05:57:35 +0000 (13:57 +0800)]
dts: starfive: update vf2 dts base on new board A1.1
reserve vf2 old board A1.0 dts as jh7110-visionfive-v2-A10.dts
new board A1.1 dts as default, jh7110-visionfive-v2.dts
vf2 dts common as jh7110-visionfive-v2.dtsi
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Fri, 19 Aug 2022 02:58:36 +0000 (10:58 +0800)]
dts: starfive: Add ac108 dts config
Add ac108 dts and config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Fri, 19 Aug 2022 02:22:44 +0000 (10:22 +0800)]
Revert "v4l2: imx219 use pinctrl"
This patch just for evb
This reverts commit
8d7c702d7bc0fef9ee5882db660390801bbccaa7.
Jianlong Huang [Wed, 27 Jul 2022 10:02:18 +0000 (18:02 +0800)]
dts: starfive: sync evb dts and config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
yanhong.wang [Mon, 25 Jul 2022 06:45:36 +0000 (14:45 +0800)]
riscv: configs: jh7110: Enable StarFive dwmac
Enable StarFive dwmac.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
Jianlong Huang [Mon, 25 Jul 2022 05:10:52 +0000 (13:10 +0800)]
dts: starfive: modify sdio0 config
set hs400es mode to promote read and write speed
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Kevin.xie [Fri, 22 Jul 2022 02:51:00 +0000 (10:51 +0800)]
dts: starfive: Modified PCIe pin setting for bring up PCIe USB hub.
Based on VisionFive V2 SCH.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Jianlong Huang [Thu, 14 Jul 2022 09:39:19 +0000 (17:39 +0800)]
dts: starfive: Add overlay dts
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Kevin.xie [Thu, 14 Jul 2022 07:31:59 +0000 (15:31 +0800)]
riscv: configs: Fix the pmic config from jh7110 to visionfive2
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
shengyang.chen [Thu, 14 Jul 2022 03:47:22 +0000 (11:47 +0800)]
riscv:linux:drm:mipidsi
update dphy reg config for visionfive2 board
Signed-off-by:shengyang.chen<shengyang.chen@starfivetech.com>
changhuang.liang [Wed, 13 Jul 2022 07:50:24 +0000 (15:50 +0800)]
v4l2: add imx219 support
dts: add imx219 configure
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
Jianlong Huang [Tue, 12 Jul 2022 05:57:38 +0000 (13:57 +0800)]
riscv:dts:starfive-visionfive2: Add ethernet-phy node to set delay_chain
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Kevin.xie [Tue, 12 Jul 2022 03:10:52 +0000 (11:10 +0800)]
arch: riscv: Add dts & defconfig for axp15060 pmic driver
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Jianlong Huang [Tue, 12 Jul 2022 00:21:51 +0000 (08:21 +0800)]
dts: starfive: Add pwmdac and wm8960 config
configs : starfive: sync JH7110_515_SDK_v1.0.0-rc2 config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Fri, 1 Jul 2022 10:35:58 +0000 (18:35 +0800)]
configs: starfive: Add at24 config and device
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 30 Jun 2022 10:40:19 +0000 (18:40 +0800)]
dts: starfive: Support visionfive2
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Tue, 7 Jun 2022 01:12:51 +0000 (09:12 +0800)]
net: phy: motorcomm: Support the YT8531 gigabit PHY
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
andy.hu [Wed, 2 Nov 2022 09:52:16 +0000 (09:52 +0000)]
Merge branch 'CR_2517_sec_jiajie.ho' into 'jh7110-5.15.y-devel'
CR_2517_515:crypto:starfive: Fix "Unbalanced pm_runtime_enable!" warning
See merge request sdk/linux!583
andy.hu [Wed, 2 Nov 2022 09:45:57 +0000 (09:45 +0000)]
Merge branch 'CR_2522_ECO_EVB_515_samin.guo' into 'jh7110-5.15.y-devel'
CR_2522:support gmac with jh7110B-evb
See merge request sdk/linux!585
andy.hu [Wed, 2 Nov 2022 09:40:20 +0000 (09:40 +0000)]
Merge branch 'CR_2395_I2C_hal.feng' into 'jh7110-5.15.y-devel'
CR_2395_I2C_hal.feng
See merge request sdk/linux!581
andy.hu [Wed, 2 Nov 2022 09:37:53 +0000 (09:37 +0000)]
Merge branch 'CR_2498_spi_without_dma_devel_5.15_ziv.xu' into 'jh7110-5.15.y-devel'
CR 2498 spi without dma devel 5.15 ziv.xu
See merge request sdk/linux!582
Samin Guo [Tue, 1 Nov 2022 12:09:36 +0000 (20:09 +0800)]
dts:satrfive:jh7110: default support jh7110A gmac0
default support jh7110A gmac0
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Samin Guo [Tue, 1 Nov 2022 12:04:52 +0000 (20:04 +0800)]
net:phy:motorcomm: support yt8521 inverted
jh7110B need yt8521 inverted.
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Samin Guo [Tue, 1 Nov 2022 11:03:46 +0000 (19:03 +0800)]
net:phy:motorcomm: support modifying RGMII_TX_CLK delay train from dts
support use original or inverted RGMII_TX_CLK delay train.
10M/100M/1000M can be configured independently.
tx_inverted_xx = val;
for example:
&gmac0 {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
tx_inverted_10 = <0>;
tx_inverted_100 = <1>;
tx_inverted_1000 = <1>;
};
};
0: original (default)
1: inverted
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Jia Jie Ho [Tue, 1 Nov 2022 06:40:42 +0000 (14:40 +0800)]
CR_2517:crypto:starfive: Fix "Unbalanced pm_runtime_enable!" warning
Crypto driver will probe multiple times waiting for
DMA to be ready, each time calling pm_runtime_enable().
Only call pm_runtime_enable() when it's not already enabled.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
ziv.xu [Tue, 1 Nov 2022 06:12:21 +0000 (14:12 +0800)]
spi-pl022-starfive.c: make spi work without dma
make spi work without dma
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Hal Feng [Mon, 31 Oct 2022 05:52:18 +0000 (13:52 +0800)]
clk: starfive: Keep the clock apb0 enabled always
This solves crush problem of i2c runtime pm and
prevents some aon modules from working abnormally.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Hal Feng [Mon, 31 Oct 2022 05:46:12 +0000 (13:46 +0800)]
Revert "i2c: designware: Descend startup priority"
This reverts commit
ef0fec210073c298598ab9a27e362e002dc0bf0b.
Then we keep the clock apb0 enabled always to fix crush
problem of i2c runtime pm.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
andy.hu [Fri, 28 Oct 2022 03:39:02 +0000 (03:39 +0000)]
Merge branch 'CR_2412_515_Clocktree_PLL1_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2412_515_Clocktree_PLL1_Xingyu.Wu
See merge request sdk/linux!553
andy.hu [Fri, 28 Oct 2022 03:38:26 +0000 (03:38 +0000)]
Merge branch 'CR_2440_515_Clocktree_1.5G_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2440_515_Clocktree_1.5G_Xingyu.Wu
See merge request sdk/linux!564
andy.hu [Fri, 28 Oct 2022 03:36:22 +0000 (03:36 +0000)]
Merge branch 'CR_2439_CPUFREQ_515_mason.huo' into 'jh7110-5.15.y-devel'
Cr 2439 cpufreq 515 mason.huo
See merge request sdk/linux!562
andy.hu [Fri, 28 Oct 2022 03:35:46 +0000 (03:35 +0000)]
Merge branch 'CR_2417_CPUIdle_515_mason.huo' into 'jh7110-5.15.y-devel'
Cr 2417 cpu idle 515 mason.huo
See merge request sdk/linux!559
andy.hu [Fri, 28 Oct 2022 03:27:46 +0000 (03:27 +0000)]
Merge branch 'CR_2462_DEV_PM_mason.huo' into 'jh7110-5.15.y-devel'
CR_2462 Port runtime PM from hibernation to devel
See merge request sdk/linux!574
mason.huo [Fri, 29 Jul 2022 07:17:55 +0000 (15:17 +0800)]
regulator: axp15060: Change the cpu_vdd_0p9 to cpu_vdd
Rename the cpu_vdd_0p9 regulator to cpu_vdd,
since the regulator may changed per cpu frequency.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
Kevin.xie [Tue, 12 Jul 2022 01:57:05 +0000 (09:57 +0800)]
driver: regulator: Add axp15060 pmic regulator driver
Add support for the axp15060 pmic.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
mason.huo [Wed, 26 Oct 2022 03:47:45 +0000 (11:47 +0800)]
cpufreq: starfive: Remove unuse clocks
The jh7110 pll0 is fixed for cpufreq,
so we should change the cpu_core clock directly.
Remove the pll0 & osc clock.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Wed, 26 Oct 2022 03:43:20 +0000 (11:43 +0800)]
riscv: defconfigs: Enable cpufreq for jh7110
Set the default cpufreq govenor to ondemand.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Mon, 24 Oct 2022 08:51:24 +0000 (16:51 +0800)]
riscv: dts: starfive: Remove unsupported cpu frequencies
As the pll0 is fixed, there are only four cpu frequencies
that can be divided from the pll0, so remove the other
cpu frequencies.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
Xingyu Wu [Thu, 27 Oct 2022 09:39:22 +0000 (17:39 +0800)]
sound:dwc:i2s:Add hibernation about i2srx-3ch
Add runtime pm and system pm in i2srx-3ch driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Thu, 27 Oct 2022 08:06:02 +0000 (16:06 +0800)]
sound:dwc:i2s:Add hibernation about i2stx-4ch1
Add runtime pm and system pm in i2stx-4ch1 driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
mason.huo [Thu, 27 Oct 2022 07:25:21 +0000 (15:25 +0800)]
riscv: deconfig: Enable pm advanced debug
Enable pm advanced debug, so that we can
check runtime PM status.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
Xingyu Wu [Fri, 21 Oct 2022 01:56:24 +0000 (09:56 +0800)]
sound:starfive:pwmdac:Add runtime pm operation
Add runtime pm operation in PWMDAC driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
ziv.xu [Thu, 27 Oct 2022 02:55:00 +0000 (10:55 +0800)]
rtc:starfive: add pm ops for rtc
add pm ops for rtc
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Hal Feng [Wed, 26 Oct 2022 13:13:09 +0000 (21:13 +0800)]
i2c: designware: Descend startup priority
So i2c will be initialized after uart.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Hal Feng [Tue, 25 Oct 2022 12:18:39 +0000 (20:18 +0800)]
i2c: designware: Uncomment and recover the pm functions
Uncomment the system pm and runtime pm ops functions. Restore
the Synopsys DesignWare i2c driver to the original version.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>