sfc: Use 64-bit writes for TX push where possible

This was originally done as part of commit
65f0b417dee94f779ce9b77102b7d73c93723b39 ("sfc: Use write-combining to
reduce TX latency"), but that had to be reverted.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "sfc: Use write-combining to reduce TX latency" and follow-ups

This reverts commits 65f0b417dee94f779ce9b77102b7d73c93723b39,
d88d6b05fee3cc78e5b0273eb58c31201dcc6b76,
fcfa060468a4edcf776f0c1211d826d5de1668c1,
747df2258b1b9a2e25929ef496262c339c380009 and
867955f5682f7157fdafe8670804b9f8ea077bc7.

Depending on the processor model, write-combining may result in
reordering that the NIC will not tolerate.  This typically results
in a DMA error event and reset by the driver, logged as:

sfc 0000:0e:00.0: eth2: TX DMA Q reports TX_EV_PKT_ERR.
sfc 0000:0e:00.0: eth2: resetting (ALL)

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-davem' of git://git.infradead.org/users/linville/wireless

bnx2x: Fix ethtool advertisement

Enable changing advertisement settings via ethtool.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix 578xx link LED

Fix 1G link LED for the BCM578xx-SFI/KR.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix XMAC loopback test

Change XMAC loopback type from CORE LOCAL to LINE LOCAL for the BCM578xx due to intermittent problem with the loopback with this configuration.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Remove fiber remote fault detection

Remove remote fault detection as a tactic retreat due to link issues involved with it.
Once issue is resolved, this feature will be restored again.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Enable FEC for 57810-KR

Enable FEC(Forward Error Correction) for 57810-KR to reduce link errors.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix ETS bandwidth

ETS bandwidth of 0% is not allowed by driver, so provide alternative HW configuration for this case.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.infradead.org/users/linville/wireless into for-davem

net: don't clear IFF_XMIT_DST_RELEASE in ether_setup

d88733150 introduced the IFF_SKB_TX_SHARING flag, which I unilaterally set in
ether_setup.  In doing this I didn't realize that other flags (such as
IFF_XMIT_DST_RELEASE) might be set prior to calling the ether_setup routine.
This patch changes ether_setup to or in SKB_TX_SHARING so as not to
inadvertently clear other existing flags.  Thanks to Pekka Riikonen for pointing
out my error

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Pekka Riikonen <priikone@iki.fi>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: copy userspace buffers on device forwarding

dev_forward_skb loops an skb back into host networking
stack which might hang on the memory indefinitely.
In particular, this can happen in macvtap in bridged mode.
Copy the userspace fragments to avoid blocking the
sender in that case.

As this patch makes skb_copy_ubufs extern now,
I also added some documentation and made it clear
the SKBTX_DEV_ZEROCOPY flag automatically instead
of doing it in all callers. This can be made into a separate
patch if people feel it's worth it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Make flow cache namespace-aware

flow_cache_lookup will return a cached object (or null pointer) that the
resolver (i.e. xfrm_policy_lookup) previously found for another namespace
using the same key/family/dir.  Instead, make the namespace part of what
identifies entries in the cache.

As before, flow_entry_valid will return 0 for entries where the namespace
has been deleted, and they will be removed from the cache the next time
flow_cache_gc_task is run.

Reported-by: Andrew Dickinson <whydna@whydna.net>
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipheth: iPhone 4 Verizon CDMA USB Product ID add

Add USB product ID for iPhone 4 CDMA Verizon
Tested on at least 2 devices

Signed-off-by: Kavan Smith <kavansmith82@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/can/af_can.c: Change del_timer to del_timer_sync

This is important for SMP platform to check if timer function is
executing on other CPU with deleting the timer.

Signed-off-by: Rajan Aggarwal <Rajan Aggarwal rajan.aggarwal85@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation: networking: dmfe.txt: Remove the maintainer of orphan networking driver

The dmfe module is a orphan driver, and with this was removed the maintainer
of the documentation.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: Change possible SYN flooding messages

"Possible SYN flooding on port xxxx " messages can fill logs on servers.

Change logic to log the message only once per listener, and add two new
SNMP counters to track :

TCPReqQFullDoCookies : number of times a SYNCOOKIE was replied to client

TCPReqQFullDrop : number of times a SYN request was dropped because
syncookies were not enabled.

Based on a prior patch from Tom Herbert, and suggestions from David.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pkt_sched: cls_rsvp.h was outdated

File cls_rsvp.h in /net/sched was outdated. I'm sending you patch for this
file.

[ tb[] array should be indexed by X not X-1 -DaveM ]

Signed-off-by: Igor Maravić <igorm@etf.rs>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix for a host coalescing bug which impared latency.

Seperated Rx and Tx coalescing to different state machines.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: don't access removed registers on 57712 and above

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: init fw_seq after undi_unload is done

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: don't reset device while reading its configuration.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: fix MF for 4-port devices

Number of VNs for 4-port devices is 2 instead of 4

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: fix rx ring size report

Store the size in bp, read from bp when queried.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: decrease print level to debug

It may happen every link toggle.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: fix BRB thresholds for dropless_fc mode

Fix the thresholds according to 5778x HW and increase rx_ring size
to suit new thresholds in dropless_fc mode.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

iwlagn: fix command queue timeout

If the command queue is constantly busy,
which can happen in P2P, the hangcheck
timer will frequently find a command in
it and will eventually reset the device
because nothing sets the timestamp for
this queue when commands are processed.

Fix this by setting the timestamp when
a command completes.

Cc: stable@kernel.org #2.6.39, #3.0.0 #3.1.0
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
SIgned-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlagn: fix stack corruption

Alexander reported a strange crash in iwlagn that
Meenakshi and Wey couldn't reproduce. I just ran
into the same issue and tracked it down to stack
corruption. This fixes it.

The problem was introduced in
commit 4b8b99b6e650d0527f3a123744b7459976581d14
Author: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date:   Fri Jul 8 14:29:48 2011 -0700

    iwlagn: radio sensor offset in le16 format

Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Cc: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Reported-by: Alexander Diewald <alex@diewald.cc>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Fix kernel panic on unplugging the device

when the device is yanked out ath_pci_remove starts doing the cleanups,
unregistering the hardware etc. so we should bail out immediately when
we get drv_flush callback from mac80211 when the card is being unplugged.
the panic occurs after we had associated to an AP.

EIP: 0060:[<fb315b00>] EFLAGS: 00010246 CPU: 0
EIP is at ath_reset+0xa0/0x1c0 [ath9k]
EAX: 00000000 EBX: 000697c0 ECX: 00000002 EDX: f3c3ccf0
ESI: 00000000 EDI: 00000000 EBP: f43e7b78 ESP: f43e7b50
  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
  Process kworker/u:2 (pid: 182, ti=f43e6000 task=f3c3c7c0
task.ti=f43e6000)
  Stack:
  0000002a 00000000 00000000 003e7b78 0000000f eaaa8500
ffffffea eaaa97c0
  eaaaa000 00000001 f43e7ba8 fb315d23 f99e7721 ecece680
eaaac738 eaaa8500
  eaaaa020 000000c8 000000c8 00000000 eaaa8d58 eaaa8500
f43e7bd0 fb080b29
  Call Trace:
[<fb315d23>] ath9k_flush+0x103/0x170 [ath9k]
[<fb080b29>] __ieee80211_recalc_idle+0x2c9/0x400
[mac80211]
[<fb080c8e>] ieee80211_recalc_idle+0x2e/0x60 [mac80211]
[<fb07aa73>] ieee80211_mgd_deauth+0x173/0x210 [mac80211]
[<fb084559>] ieee80211_deauth+0x19/0x20 [mac80211]
[<f99dda53>] __cfg80211_mlme_deauth+0xf3/0x140
[cfg80211]
[<c0633d00>] ? __mutex_lock_common+0x1f0/0x380
[<f99e1b5d>] __cfg80211_disconnect+0x18d/0x1f0
[cfg80211]
[<f99c8199>] cfg80211_netdev_notifier_call+0x159/0x5c0
[cfg80211]
[<c0608a64>] ? packet_notifier+0x174/0x1f0
[<c0639202>] notifier_call_chain+0x82/0xb0
[<c0170d8f>] raw_notifier_call_chain+0x1f/0x30
[<c053b86c>] call_netdevice_notifiers+0x2c/0x60
[<c0182184>] ? trace_hardirqs_on_caller+0xf4/0x180
[<c053b8ec>] __dev_close_many+0x4c/0xd0
[<c053ba2d>] dev_close_many+0x6d/0xc0
[<c053bb53>] rollback_registered_many+0x93/0x1c0
[<c018221b>] ? trace_hardirqs_on+0xb/0x10
[<c053bc95>] unregister_netdevice_many+0x15/0x50
[<fb07f83b>] ieee80211_remove_interfaces+0x7b/0xb0
[mac80211]
[<fb06a14b>] ieee80211_unregister_hw+0x4b/0x110
[mac80211]
[<fb311a4a>] ath9k_deinit_device+0x3a/0x60 [ath9k]
[<fb31eed6>] ath_pci_remove+0x46/0x90 [ath9k]
[<c03b4ac4>] pci_device_remove+0x44/0x100
[<c043eb54>] __device_release_driver+0x64/0xb0
[<c043ec67>] device_release_driver+0x27/0x40
[<c043deeb>] bus_remove_device+0x7b/0xa0
[<c043c491>] device_del+0xf1/0x180
[<c043c530>] device_unregister+0x10/0x20
[<c03afafe>] pci_stop_bus_device+0x6e/0x80
[<c03afb72>] pci_remove_bus_device+0x12/0xa0
[<c03c2f29>] pciehp_unconfigure_device+0x89/0x180
[<c0181e54>] ? mark_held_locks+0x64/0x100
[<c063390f>] ? __mutex_unlock_slowpath+0xaf/0x140
[<c03c1f84>] pciehp_disable_slot+0x64/0x1b0
[<c03c2850>] pciehp_power_thread+0xd0/0x100
[<c0164ad0>] ? process_one_work+0x100/0x4d0
[<c0164b4c>] process_one_work+0x17c/0x4d0
[<c0164ad0>] ? process_one_work+0x100/0x4d0
[<c03c2780>] ? queue_interrupt_event+0xa0/0xa0
[<c01662bb>] worker_thread+0x13b/0x320
[<c018221b>] ? trace_hardirqs_on+0xb/0x10
[<c0166180>] ? manage_workers+0x1e0/0x1e0
[<c016a654>] kthread+0x84/0x90
[<c016a5d0>] ? __init_kthread_worker+0x60/0x60
[<c063d106>] kernel_thread_helper+0x6/0x10

Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: fix missing sta_lock in __sta_info_destroy

Since my commit 34e895075e21be3e21e71d6317440d1ee7969ad0
("mac80211: allow station add/remove to sleep") there is
a race in mac80211 when it clears the TIM bit because a
sleeping station disconnected, the spinlock isn't held
around the relevant code any more. Use the right API to
acquire the spinlock correctly.

Cc: stable@kernel.org [2.6.34+]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rtlwifi: Fix problem when switching connections

The driver fails to clear encryption keys making it impossible
to switch connections.

Signed-off-by: George <george0505@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org> [2.6.39+]
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rtlwifi: rtl8192su: Fix problem connecting to HT-enabled AP

The driver fails to connect to 802.11n-enabled APs. The patch fixes
Bug #42262.

Signed-off-by: George <george0505@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org> [2.6.39+]
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k_hw: fix calibration on 5 ghz

ADC calibrations cannot run on 5 GHz with fast clock enabled. They
need to be disabled, otherwise they'll hang and IQ mismatch calibration
will not be run either.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Adrian Chadd <adrian@freebsd.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlegacy: fix BUG_ON(info->control.rates[0].idx < 0)

When trying to connect to 5GHz we can provide negative index to
mac80211 what trigger BUG_ON. Reason of iwl-3945-rs malfunction
on 5GHz is unknown and needs further investigation. For now, to
do not trigger a bug, correct value and just print WARNING.

Address bug:
https://bugzilla.redhat.com/show_bug.cgi?id=730653

Reported-and-tested-by: Jan Teichmann <jan.teichmann@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k_hw: Fix init mode register regression

The commit 172805ad46b78717a738ca5c7908c68f0326d3a9
overwirtes additional clock settings of AR9330 to
all AR9300 chips.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

netpoll: fix incorrect access to skb data in __netpoll_rx

__netpoll_rx() doesnt properly handle skbs with small header

pskb_may_pull() or pskb_trim_rcsum() can change skb->data, we must
reload it.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cassini: init before use in cas_interruptN.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Spotted-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

can: ti_hecc: Fix uninitialized spinlock in probe

In ti_hecc_probe(), the spinlock  priv->mbx_lock is not
inited, causing a spinlock lockup BUG.

Acked-by: Anant Gole <anantgole@ti.com>
Signed-off-by: Abhilash K V <abhilash.kv@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

can: ti_hecc: Fix unintialized variable

In ti_hecc_xmit(), local variable "data" is not initialized before
being used.
This initialization got inadvertently removed in the following patch:

can: Unify droping of invalid tx skbs and netdev stats

Acked-by: Anant Gole <anantgole@ti.com>
Signed-off-by: Abhilash K V <abhilash.kv@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sh_eth: fix the compile error

Fix the following build error:

  CC      drivers/net/sh_eth.o
drivers/net/sh_eth.c:1115: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘sh_eth_interrupt’
drivers/net/sh_eth.c: In function ‘sh_eth_open’:
drivers/net/sh_eth.c:1387: error: implicit declaration of function ‘request_irq’
drivers/net/sh_eth.c:1387: error: ‘sh_eth_interrupt’ undeclared (first use in this function)
drivers/net/sh_eth.c:1387: error: (Each undeclared identifier is reported only once
drivers/net/sh_eth.c:1387: error: for each function it appears in.)
drivers/net/sh_eth.c:1391: error: ‘IRQF_SHARED’ undeclared (first use in this function)
drivers/net/sh_eth.c:1424: error: implicit declaration of function ‘free_irq’
make[2]: *** [drivers/net/sh_eth.o] Error 1

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/phy: fix DP83865 phy interrupt handler

According to the DP83865 datasheet we need to clear
the interrupt status bit by writing a 1 to the
corresponding bit in INT_CLEAR (2:0 are reserved).

Proposed and tested by Thorsten.

Signed-off-by: Thorsten Schubert <tshu@msc-ge.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

sendmmsg/sendmsg: fix unsafe user pointer access

Dereferencing a user pointer directly from kernel-space without going
through the copy_from_user family of functions is a bad idea. Two of
such usages can be found in the sendmsg code path called from sendmmsg,
added by

commit c71d8ebe7a4496fb7231151cb70a6baa0cb56f9a upstream.
commit 5b47b8038f183b44d2d8ff1c7d11a5c1be706b34 in the 3.0-stable tree.

Usages are performed through memcmp() and memcpy() directly. Fix those
by using the already copied msg_sys structure instead of the __user *msg
structure. Note that msg_sys can be set to NULL by verify_compat_iovec()
or verify_iovec(), which requires additional NULL pointer checks.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
CC: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
CC: Anton Blanchard <anton@samba.org>
CC: David S. Miller <davem@davemloft.net>
CC: stable <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmveth: Fix leak when recycling skb and hypervisor returns error

If h_add_logical_lan_buffer returns an error we need to free
the skb.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

arp: fix rcu lockdep splat in arp_process()

Dave Jones reported a lockdep splat triggered by an arp_process() call
from parp_redo().

Commit faa9dcf793be (arp: RCU changes) is the origin of the bug, since
it assumed arp_process() was called under rcu_read_lock(), which is not
true in this particular path.

Instead of adding rcu_read_lock() in parp_redo(), I chose to add it in
neigh_proxy_process() to take care of IPv6 side too.

 ===================================================
 [ INFO: suspicious rcu_dereference_check() usage. ]
 ---------------------------------------------------
 include/linux/inetdevice.h:209 invoked rcu_dereference_check() without
protection!

 other info that might help us debug this:

 rcu_scheduler_active = 1, debug_locks = 0
 4 locks held by setfiles/2123:
  #0:  (&sb->s_type->i_mutex_key#13){+.+.+.}, at: [<ffffffff8114cbc4>]
walk_component+0x1ef/0x3e8
  #1:  (&isec->lock){+.+.+.}, at: [<ffffffff81204bca>]
inode_doinit_with_dentry+0x3f/0x41f
  #2:  (&tbl->proxy_timer){+.-...}, at: [<ffffffff8106a803>]
run_timer_softirq+0x157/0x372
  #3:  (class){+.-...}, at: [<ffffffff8141f256>] neigh_proxy_process
+0x36/0x103

 stack backtrace:
 Pid: 2123, comm: setfiles Tainted: G        W
3.1.0-0.rc2.git7.2.fc16.x86_64 #1
 Call Trace:
  <IRQ>  [<ffffffff8108ca23>] lockdep_rcu_dereference+0xa7/0xaf
  [<ffffffff8146a0b7>] __in_dev_get_rcu+0x55/0x5d
  [<ffffffff8146a751>] arp_process+0x25/0x4d7
  [<ffffffff8146ac11>] parp_redo+0xe/0x10
  [<ffffffff8141f2ba>] neigh_proxy_process+0x9a/0x103
  [<ffffffff8106a8c4>] run_timer_softirq+0x218/0x372
  [<ffffffff8106a803>] ? run_timer_softirq+0x157/0x372
  [<ffffffff8141f220>] ? neigh_stat_seq_open+0x41/0x41
  [<ffffffff8108f2f0>] ? mark_held_locks+0x6d/0x95
  [<ffffffff81062bb6>] __do_softirq+0x112/0x25a
  [<ffffffff8150d27c>] call_softirq+0x1c/0x30
  [<ffffffff81010bf5>] do_softirq+0x4b/0xa2
  [<ffffffff81062f65>] irq_exit+0x5d/0xcf
  [<ffffffff8150dc11>] smp_apic_timer_interrupt+0x7c/0x8a
  [<ffffffff8150baf3>] apic_timer_interrupt+0x73/0x80
  <EOI>  [<ffffffff8108f439>] ? trace_hardirqs_on_caller+0x121/0x158
  [<ffffffff814fc285>] ? __slab_free+0x30/0x24c
  [<ffffffff814fc283>] ? __slab_free+0x2e/0x24c
  [<ffffffff81204e74>] ? inode_doinit_with_dentry+0x2e9/0x41f
  [<ffffffff81204e74>] ? inode_doinit_with_dentry+0x2e9/0x41f
  [<ffffffff81204e74>] ? inode_doinit_with_dentry+0x2e9/0x41f
  [<ffffffff81130cb0>] kfree+0x108/0x131
  [<ffffffff81204e74>] inode_doinit_with_dentry+0x2e9/0x41f
  [<ffffffff81204fc6>] selinux_d_instantiate+0x1c/0x1e
  [<ffffffff81200f4f>] security_d_instantiate+0x21/0x23
  [<ffffffff81154625>] d_instantiate+0x5c/0x61
  [<ffffffff811563ca>] d_splice_alias+0xbc/0xd2
  [<ffffffff811b17ff>] ext4_lookup+0xba/0xeb
  [<ffffffff8114bf1e>] d_alloc_and_lookup+0x45/0x6b
  [<ffffffff8114cbea>] walk_component+0x215/0x3e8
  [<ffffffff8114cdf8>] lookup_last+0x3b/0x3d
  [<ffffffff8114daf3>] path_lookupat+0x82/0x2af
  [<ffffffff8110fc53>] ? might_fault+0xa5/0xac
  [<ffffffff8110fc0a>] ? might_fault+0x5c/0xac
  [<ffffffff8114c564>] ? getname_flags+0x31/0x1ca
  [<ffffffff8114dd48>] do_path_lookup+0x28/0x97
  [<ffffffff8114df2c>] user_path_at+0x59/0x96
  [<ffffffff811467ad>] ? cp_new_stat+0xf7/0x10d
  [<ffffffff811469a6>] vfs_fstatat+0x44/0x6e
  [<ffffffff811469ee>] vfs_lstat+0x1e/0x20
  [<ffffffff81146b3d>] sys_newlstat+0x1a/0x33
  [<ffffffff8108f439>] ? trace_hardirqs_on_caller+0x121/0x158
  [<ffffffff812535fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [<ffffffff8150af82>] system_call_fastpath+0x16/0x1b

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: fix a possible use after free

br_multicast_ipv6_rcv() can call pskb_trim_rcsum() and therefore skb
head can be reallocated.

Cache icmp6_type field instead of dereferencing twice the struct
icmp6hdr pointer.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: Pseudo-header required for the checksum of ICMPv6

Checksum of ICMPv6 is not properly computed because the pseudo header is not used.
Thus, the MLD packet gets dropped by the bridge.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Reported-by: Ang Way Chuang <wcang@sfc.wide.ad.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

mcast: Fix source address selection for multicast listener report

Should check use count of include mode filter instead of total number
of include mode filters.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Update GIT trees for network development

Remove -2.6 from net and net-next tree names.

Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wiimote: Add status and return request handlers
  HID: wiimote: Add drm request
  HID: wiimote: Register led class devices
  HID: wiimote: Correctly call HID open/close callbacks
  HID: wiimote: Simplify synchronization
  HID: usbhid: Add support for SiGma Micro chip
  HID: add support for new revision of Apple aluminum keyboard

ath9k: Fix PS wrappers in ath9k_set_coverage_class

this callback is called during suspend/resume and also via iw command.
it configures parameters like sifs, slottime, acktimeout in
ath9k_hw_init_global_settings where few REG_READ, REG_RMW are also done
and hence the need for PS wrappers

Cc: stable@kernel.org
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

carl9170: Fix mismatch in carl9170_op_set_key mutex lock-unlock

If is_main_vif(ar, vif) reports that we have to fall back
to software encryption, we goto err_softw; before locking ar->mutex.
As a result, we have unprotected call to carl9170_set_operating_mode
and unmatched mutex_unlock.

The patch fix the issue by adding mutex_lock before goto.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: <stable@kernel.org>
Acked-By: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ad714x - read the interrupt status registers in a row
  Input: ad714x - use DMA-safe buffers for spi_write()
  Input: ad714x - fix endianness issues
  Input: ad714xx-spi - force SPI bus into the default 8-bit mode
  Input: ep93xx_keypad - add missing include of linux/module.h
  Input: tnetv107x-ts - add missing include of linux/module.h
  Input: max11801_ts - correct license statement
  Input: atmel_mxt_ts - report pressure information from the driver
  Input: bcm5974 - Add support for newer MacBookPro8,2
  Input: wacom - report id 3 returns 4 bytes of data
  Input: wacom - add WAC_MSG_RETRIES define
  Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)
  Input: tegra-kbc - correct call to input_free_device
  Input: mpu3050 - correct call to input_free_device
  Input: bcm5974 - add support for touchpads found in MacBookAir4,2
  Input: mma8450 - fix module device table type
  Input: remove CLOCK_TICK_RATE from analog joystick driver

Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message
  fuse: mark pages accessed when written to
  fuse: delete dead .write_begin and .write_end aops
  fuse: fix flock
  fuse: fix non-ANSI void function notation

Merge git://git./linux/kernel/git/davem/sparc

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Allow handling signals when stack is corrupted.

Merge git://git./linux/kernel/git/davem/net

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
  bridge: fix a possible net_device leak
  net: Documentation: RFC 2553bis is now RFC 3493
  atm: br2684: Fix oops due to skb->dev being NULL
  ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONS
  net: netdev-features.txt update to Documentation/networking/00-INDEX
  vlan: reset headers on accel emulation path
  forcedeth: call vlan_mode only if hw supports vlans
  via-velocity: remove non-tagged packet filtering
  bonding:reset backup and inactive flag of slave
  net_sched: fix port mirror/redirect stats reporting
  sit tunnels: propagate IPv6 transport class to IPv4 Type of Service
  gianfar: reduce stack usage in gianfar_ethtool.c
  net: minor update to Documentation/networking/scaling.txt
  net: add missing entries to Documentation/networking/00-INDEX
  gianfar: prevent buggy hw rx vlan tagging
  net: sh_eth: Fix build by forgot including linux/interrupt.h
  drivers/net/can/sja1000/plx_pci.c: eliminate double free
  usbnet/cdc_ncm: Don't use stack variables for DMA
  vmxnet3: Don't enable vlan filters in promiscuous mode.
  iwlagn: sysfs couldn't find the priv pointer
  ...

Merge branches 'wiimote' and 'upstream-fixes' into for-linus

fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message

FUSE_NOTIFY_INVAL_ENTRY didn't check the length of the write so the
message processing could overrun and result in a "kernel BUG at
fs/fuse/dev.c:629!"

Reported-by: Han-Wen Nienhuys <hanwenn@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, vdso: On system call restart after SYSENTER, use int $0x80
  x86, UV: Remove UV delay in starting slave cpus
  x86, olpc: Wait for last byte of EC command to be accepted

x86-32, vdso: On system call restart after SYSENTER, use int $0x80

When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle
the arguments to match the int $0x80 calling convention.  This was
probably a design mistake, but it's what it is now.  This causes
errors if the system call as to be restarted.

For SYSENTER, we have to invoke the instruction from the vdso as the
return address is hardcoded.  Accordingly, we can simply replace the
jump in the vdso with an int $0x80 instruction and use the slower
entry point for a post-restart.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.com
Cc: <stable@kernel.org>

m68k: fix __page_to_pfn for a const struct page argument

Fixes fallout due to the removal of the cast in commit aa462abe8aaf
("mm: fix __page_to_pfn for a const struct page argument")

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

wl12xx: add max_sched_scan_ssids value to the hw description

After commit 5a865ba, we require a separate value to indicate the
number of supported SSIDs in scheduled scans.  This patch adds a
proper value to the wl12xx driver.

This fixes a regression in 3.1-rc3 where scheduled scans were not
working properly with the wl12xx driver.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wl12xx: Fix validation of pm_runtime_get_sync return value

wl1271_sdio_power_on checks if the return value of pm_runtime_get_sync
is non-zero, and if so bails out.
However, pm_runtime_get_sync can return a positive number which does not
suggest an error has occurred. This is problematic for two reasons:

1. The function will needlessly bail out without decrementing back the
   runtime PM reference counter.
2. wl1271_power_on only checks if wl1271_power_on return value is
   negative. This means that wl1271_power_on will continue even if
   wl1271_sdio_power_on bailed out. As a result, sdio transactions will
   be initiated without properly enabling the sdio function and claiming
   the host. This could even lead to a kernel panic.

Fix this by only checking that the return value of pm_runtime_get_sync
is non-negative.

Signed-off-by: Ido Yariv <ido@wizery.com>
Acked-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wl12xx: Remove obsolete testmode NVS push command

The testmode NVS push command is no longer in use. In addition, it has
several implementation issues that prevent it from working correctly:

1. wl1271_tm_cmd_configure relies on wl->chip.id being set. However,
   since the device was not necessarily booted by the time the function
   is called, wl->chip.id will be initialized to 0.
2. The NVS file is fetched by calling request_firmware() before it is
   possible to push an NVS file.
3. The maximum allowed size of nl binary payloads is not sufficient for
   pushing NVS files.
4. Pushing 128x NVS files will always fail due to a bug in the
   validation code.
5. In case the pushed NVS file is found invalid, the mutex will be kept
   locked and the nvs member will become a dangling pointer.

Since this feature is not being used, remove it completely instead of
fixing it.

Signed-off-by: Ido Yariv <ido@wizery.com>
Acked-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix tracing builds inside the source tree
  xfs: remove subdirectories
  xfs: don't expect xfs headers to be in subdirectories

Merge git://git.infradead.org/users/cbou/battery-3.1

* git://git.infradead.org/users/cbou/battery-3.1:
  s3c-adc-battery: Fix compilation error due to missing header (module.h)
  max8997_charger: Needs module.h
  max8998_charger: Needs module.h

Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 HDMI-A Connector
  drm/ttm: ensure ttm for new node is bound before calling move_notify()
  drm/ttm: unbind ttm before destroying node in accel move cleanup
  drm/ttm: fix ttm_bo_add_ttm(user) failure path
  drm/radeon: Make vramlimit parameter actually work.
  drm/radeon: Explicitly print GTT/VRAM offsets on test failure.
  drm/radeon: Take IH ring into account for test size calculation.
  drm/radeon/alpha: Add Alpha support to Radeon DRM code

Revert "irq: Always set IRQF_ONESHOT if no primary handler is specified"

This reverts commit f3637a5f2e2eb391ff5757bc83fb5de8f9726464.

It turns out that this breaks several drivers, one example being OMAP
boards which use the on-board OMAP UARTs and the omap-serial driver that
will not boot to userspace after the commit.

Paul Walmsley reports that enabling CONFIG_DEBUG_SHIRQ reveals 'IRQ
handler type mismatch' errors:

  IRQ handler type mismatch for IRQ 74
  current handler: serial idle
  ...

and the reason is that setting IRQF_ONESHOT will now result in those
interrupt handlers having different IRQF flags, and thus being
unsharable.  So the commit log in the reverted commit:

                            "Since it is required for those users and
    there is no difference for others it makes sense to add this flag
    unconditionally."

is simply not true: there may not be any difference from a "actions at
irq time", but there is a *big* difference wrt this flag testing irq
management (see __setup_irq() in kernel/irq/manage.c).

One solution may be to stop verifying IRQF_ONESHOT in __setup_irq(), but
right now the safe course of action is to revert the change.  Let's
revisit this in a later merge window.

Reported-by: Paul Walmsley <paul@pwsan.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 HDMI-A Connector

Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data
   to i2c bus for a HDMI connector that is not implemented/existent
   on the notebook's board.

   Fix by applying extented DDC probing for this connector.

   Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors
   with Improperly Wired DDC Lines

   Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook

BugLink: http://bugs.launchpad.net/bugs/826677
Signed-off-by: Thomas Reim <reimth@gmail.com>
Acked-by: Chris Routh <routhy@gmail.com>
Cc: <stable@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

HID: wiimote: Add status and return request handlers

The wiimote resets the current drm when an extension is plugged in.
Fortunately, it also sends a status report in this situation so we just
reset the drm on every status report to keep the drm consistent.

Also handle return reports from the wiimote which indicate success and
failure of requests that we've sent.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wiimote: Add drm request

The wiimote reports data in several data reporting modes (DRM). The DRM
request makes the wiimote send data in the requested drm.

The DRM mode can be set explicitely or can be chosen by the driver. To let
the driver choose the DRM mode, pass WIIPROTO_REQ_NULL placeholder to it. This
is no valid request and is replaced with an appropriate DRM.

Currently, the driver always sets the basic DRM_K mode, but this will be
extended when further peripherals like accelerometer and IR are supported.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wiimote: Register led class devices

This registers 4 led devices to allow controlling the wiimote leds via standard
LED sysfs API. It removes the four sysfs attributes so we don't have two APIs
for one device.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wiimote: Correctly call HID open/close callbacks

Even though the bluetooth hid backend does not react on open/close callbacks, we
should call them to be consistent with other hid drivers.

Also the new input open/close handlers will be used in future to prepare the
wiimote device for IR/extension input.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wiimote: Simplify synchronization

The new locking scheme in HID core allows us to remove a bit of synchronization.
Since the HID layer acts synchronously we simply register input core last and
there are no synchonization issues anymore.
Also register sysfs files after that to simplify the code.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drm/ttm: ensure ttm for new node is bound before calling move_notify()

This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't
the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some
paths as nouveau's move_notify() hook requires that the dma addresses be
valid at this point.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/ttm: unbind ttm before destroying node in accel move cleanup

Nouveau makes the assumption that if a TTM is bound there will be a mm_node
around for it and the backwards ordering here resulted in a use-after-free
on some eviction paths.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/ttm: fix ttm_bo_add_ttm(user) failure path

ttm_tt_destroy kfrees passed object, so we need to nullify
a reference to it.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

HID: usbhid: Add support for SiGma Micro chip

Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks.

These keyboards dont seem to allow the records to be initialized, and hence a
timeout occurs when the usbhid driver attempts to initialize them. The patch
just adds the signature for these keyboards to the hid-quirks list with the
setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the
timeout to occur.

Signed-off-by: Jeremiah Matthey <sprg86@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

bridge: fix a possible net_device leak

Jan Beulich reported a possible net_device leak in bridge code after
commit bb900b27a2f4 (bridge: allow creating bridge devices with netlink)

Reported-by: Jan Beulich <JBeulich@novell.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfs: fix tracing builds inside the source tree

The code really requires the current source directory to be in the
header search path.  We already do this if building with an object
tree separate from the source, but it needs to be added manually
if building inside the source.  The cflags addition for it accidentally
got removed when collapsing the xfs directory structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>

Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless

Linux 3.1-rc3

net: Documentation: RFC 2553bis is now RFC 3493

Signed-off-by: Geoffrey Thomas <geofft@mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Add group event scheduling option to perf record/stat
  MAINTAINERS: Fix list of perf events source files
  perf tools: Fix build against newer glibc
  perf tools: Fix error handling of unknown events
  perf evlist: Fix missing event name init for default event
  perf list: Fix exit value

Merge branch 'stable/bug.fixes' of git://git./linux/kernel/git/konrad/xen

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/tracing: Fix tracing config option properly
  xen: Do not enable PV IPIs when vector callback not present
  xen/x86: replace order-based range checking of M2P table by linear one
  xen: xen-selfballoon.c needs more header files

bcma: add uevent to the bus, to autoload drivers

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k_hw: Fix STA (AR9485) bringup issue due to incorrect MAC address

Due to some recent optimization done in the way the mac address
bytes are written into the OTP memory, some AR9485 chipsets were
forced to use the first byte from the eeprom template and the
remaining bytes are read from OTP.

AR9485 happens to use generic eeprom template which has 0x1 as
the first byte causes issues in bringing up the card.

So fixed the eeprom template accordingly to address the issue.

Cc: stable@kernel.org
Cc: Paul Stewart <pstew@google.com>
Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rt2x00: do not drop usb dev reference counter on suspend

When hibernating ->resume may not be called by usb core, but disconnect
and probe instead, so we do not increase the counter after decreasing
it in ->supend. As a result we free memory early, and get crash when
unplugging usb dongle.

BUG: unable to handle kernel paging request at 6b6b6b9f
IP: [<c06909b0>] driver_sysfs_remove+0x10/0x30
*pdpt = 0000000034f21001 *pde = 0000000000000000
Pid: 20, comm: khubd Not tainted 3.1.0-rc1-wl+ #20 LENOVO 6369CTO/6369CTO
EIP: 0060:[<c06909b0>] EFLAGS: 00010202 CPU: 1
EIP is at driver_sysfs_remove+0x10/0x30
EAX: 6b6b6b6b EBX: f52bba34 ECX: 00000000 EDX: 6b6b6b6b
ESI: 6b6b6b6b EDI: c0a0ea20 EBP: f61c9e68 ESP: f61c9e64
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process khubd (pid: 20, ti=f61c8000 task=f6138270 task.ti=f61c8000)
Call Trace:
 [<c06909ef>] __device_release_driver+0x1f/0xa0
 [<c0690b20>] device_release_driver+0x20/0x40
 [<c068fd64>] bus_remove_device+0x84/0xe0
 [<c068e12a>] ? device_remove_attrs+0x2a/0x80
 [<c068e267>] device_del+0xe7/0x170
 [<c06d93d4>] usb_disconnect+0xd4/0x180
 [<c06d9d61>] hub_thread+0x691/0x1600
 [<c0473260>] ? wake_up_bit+0x30/0x30
 [<c0442a39>] ? complete+0x49/0x60
 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0
 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0
 [<c0472eb4>] kthread+0x74/0x80
 [<c0472e40>] ? kthread_worker_fn+0x150/0x150
 [<c0809b3e>] kernel_thread_helper+0x6/0x10

Cc: stable@kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: fix suspend/resume races with unregister hw

Do not call ->suspend, ->resume methods after we unregister wiphy. Also
delete sta_clanup timer after we finish wiphy unregister to avoid this:

WARNING: at lib/debugobjects.c:262 debug_print_object+0x85/0xa0()
Hardware name: 6369CTO
ODEBUG: free active (active state 0) object type: timer_list hint: sta_info_cleanup+0x0/0x180 [mac80211]
Modules linked in: aes_i586 aes_generic fuse bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq mperf ext2 dm_mod uinput thinkpad_acpi hwmon sg arc4 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 i2c_i801 iTCO_wdt iTCO_vendor_support e1000e ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom yenta_socket ahci libahci pata_acpi ata_generic ata_piix i915 drm_kms_helper drm i2c_algo_bit video [last unloaded: microcode]
Pid: 5663, comm: pm-hibernate Not tainted 3.1.0-rc1-wl+ #19
Call Trace:
 [<c0454cfd>] warn_slowpath_common+0x6d/0xa0
 [<c05e05e5>] ? debug_print_object+0x85/0xa0
 [<c05e05e5>] ? debug_print_object+0x85/0xa0
 [<c0454dae>] warn_slowpath_fmt+0x2e/0x30
 [<c05e05e5>] debug_print_object+0x85/0xa0
 [<f8a808e0>] ? sta_info_alloc+0x1a0/0x1a0 [mac80211]
 [<c05e0bd2>] debug_check_no_obj_freed+0xe2/0x180
 [<c051175b>] kfree+0x8b/0x150
 [<f8a126ae>] cfg80211_dev_free+0x7e/0x90 [cfg80211]
 [<f8a13afd>] wiphy_dev_release+0xd/0x10 [cfg80211]
 [<c068d959>] device_release+0x19/0x80
 [<c05d06ba>] kobject_release+0x7a/0x1c0
 [<c07646a8>] ? rtnl_unlock+0x8/0x10
 [<f8a13adb>] ? wiphy_resume+0x6b/0x80 [cfg80211]
 [<c05d0640>] ? kobject_del+0x30/0x30
 [<c05d1a6d>] kref_put+0x2d/0x60
 [<c05d056d>] kobject_put+0x1d/0x50
 [<c08015f4>] ? mutex_lock+0x14/0x40
 [<c068d60f>] put_device+0xf/0x20
 [<c069716a>] dpm_resume+0xca/0x160
 [<c04912bd>] hibernation_snapshot+0xcd/0x260
 [<c04903df>] ? freeze_processes+0x3f/0x90
 [<c049151b>] hibernate+0xcb/0x1e0
 [<c048fdc0>] ? pm_async_store+0x40/0x40
 [<c048fe60>] state_store+0xa0/0xb0
 [<c048fdc0>] ? pm_async_store+0x40/0x40
 [<c05d0200>] kobj_attr_store+0x20/0x30
 [<c0575ea4>] sysfs_write_file+0x94/0xf0
 [<c051e26a>] vfs_write+0x9a/0x160
 [<c0575e10>] ? sysfs_open_file+0x200/0x200
 [<c051e3fd>] sys_write+0x3d/0x70
 [<c080959f>] sysenter_do_call+0x12/0x28

Cc: stable@kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Merge branch 'master' of /linux/kernel/git/padovan/bluetooth

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

Input: ad714x - read the interrupt status registers in a row

The interrupt status registers should be read in row to avoid invalid data.

Alter "read" method for both bus options to allow reading several registers
in a row and make sure we read interrupt status registers properly.

Read sequence saves 50% of bus transactions compared to single register
reads. So use it also for the result registers, which are also located
in a row.

Also update copyright notice.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: ad714x - use DMA-safe buffers for spi_write()

spi_write() requires use of DMA-safe (cacheline aligned) buffers.
Also use the same buffers when reading data since to avoid extra
locking and potential memory allocation in spi_write_then_read().

Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: ad714x - fix endianness issues

Allow driver to be used on Big Endian boxes.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: ad714xx-spi - force SPI bus into the default 8-bit mode

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

xen/tracing: Fix tracing config option properly

Steven Rostedt says we should use CONFIG_EVENT_TRACING.

Cc:Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

xen: Do not enable PV IPIs when vector callback not present

Fix regression for HVM case on older (<4.1.1) hypervisors caused by

  commit 99bbb3a84a99cd04ab16b998b20f01a72cfa9f4f
  Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
  Date:   Thu Dec 2 17:55:10 2010 +0000

    xen: PV on HVM: support PV spinlocks and IPIs

This change replaced the SMP operations with event based handlers without
taking into account that this only works when the hypervisor supports
callback vectors. This causes unexplainable hangs early on boot for
HVM guests with more than one CPU.

BugLink: http://bugs.launchpad.net/bugs/791850
CC: stable@kernel.org
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

drm/radeon: Make vramlimit parameter actually work.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon: Explicitly print GTT/VRAM offsets on test failure.

Otherwise these would need to be painstakingly calculated looking at the source
code.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon: Take IH ring into account for test size calculation.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>