Simon Horman [Fri, 15 Feb 2013 13:48:36 +0000 (22:48 +0900)]
ARM: shmobile: kzm9g: correct smsc regulator registration
Correct the name of smsc devices used for regulator registration
allowing the regulators to be found and used.
This eliminates the need for CONFIG_REGULATOR_DUMMY
when CONFIG_REGULATOR is set.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Mon, 25 Feb 2013 09:39:44 +0000 (01:39 -0800)]
ARM: shmobile: marzen: Use gic_iid macro for ICCIAR / interrupt ID
ARM: shmobile: add gic_iid macro for ICCIAR / interrupt ID
enabled to use gic_iid macro.
This patch exchange current GIC interrupt setting
from gic_spi() to gic_iid()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[ horms+renesas@verge.net.au: Split irq.h portion into a separate patch ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Fri, 15 Feb 2013 12:38:20 +0000 (21:38 +0900)]
ARM: shmobile: kzm9g: Trim reference DT_MACHINE_START
Remove .init_late and .restart from DT_MACHINE_START
for kzm9g reference as these are not necessary to
bring the board up which is the main aim of kzm9g reference.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Fri, 15 Feb 2013 12:38:20 +0000 (21:38 +0900)]
ARM: shmobile: kzm9g: Remove warning about SMP
Remove warning about SMP not working with the
clock initialisation used for kzm9g reference.
This is resolved by not selecting CONFIG_PREEMPT.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Tue, 15 Jan 2013 17:23:36 +0000 (18:23 +0100)]
ARM: shmobile: simplify kzm9g Kconfig dependencies
Reference kernel configurations for armadillo800eva and kzm9g boards do not
have to depend on their respective "legacy" configurations, doing device
instantiation in .c, they can be configured and built independently.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
[horms+renesas@verge.net.au: created separate patch for kzm9g portion]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Fri, 8 Feb 2013 18:38:27 +0000 (19:38 +0100)]
ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference
Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT
support we cannot use GPIO card-detection and regulator switching.
Also update the MMCIF DT node to use all 8 data lines and avoid
redundant information in DT.
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
[ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Fri, 8 Feb 2013 18:38:31 +0000 (19:38 +0100)]
ARM: shmobile: parse DT and configure pinmux early on kzm9g-reference
GPIOs can be provided by the pinctrl subsystem, which can be initialised
by DT. Therefore DT has to be parsed before requesting GPIOs. Also non-DT
pinmux has to be configured early.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Wed, 21 Nov 2012 15:34:25 +0000 (00:34 +0900)]
ARM: shmobile: kzm9g: Reference DT implementation
Provide alternate board code for the kzm9g to demonstrate
how DT may be used given the current state of driver
device tree support. This is intended to act as a reference
for mach-shmobile developers.
Some notes:
* Brings up the GIC interrupt handler using device tree
* Brings up the following device using device tree:
- MMCIF (MMC)
* Does not bring up the INTC interrupt controller at all,
thus external devices may not be used. In particular,
the SMSC ethernet device may not be used and thus
NFS root may not be used.
* Uses existing C code and not device tree to initialise the following,
which are needed for a working board:
- SCIF (Serial)
- CMT (Clock)
- PFC (GPIO)
To use this alternate board code instead of the normal board code,
CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config.
And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used.
Includes fix by Thierry Reding to no longer use gic_handle_irq()
Includes fixes by Guennadi Liakhovetski for recent pinmux changes.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 29 Jan 2013 02:40:18 +0000 (11:40 +0900)]
ARM: shmobile: marzen: Reference DT implementation
Provide alternate board code for the marzen to demonstrate
how DT may be used given the current state of driver
device tree support. This is intended to act as a reference
for mach-shmobile developers.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Arnd Bergmann [Thu, 14 Feb 2013 22:26:54 +0000 (23:26 +0100)]
ARM: shmobile: mark mackerel sh_mmcif_device __maybe_unused
Patch
eac036ef9e "ARM: shmobile: streamline mackerel SD and MMC devices"
made the use of the sh_mmcif_device variable for mackarel optional,
but the definition is always provided, causing a build warning.
arch/arm/mach-shmobile/board-mackerel.c:1120:31: warning: 'sh_mmcif_device'
defined but not used [-Wunused-variable]
Marking the variable as __maybe_unused will do the right thing here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Tue, 12 Feb 2013 17:15:33 +0000 (18:15 +0100)]
ARM: shmobile: streamline mackerel SD and MMC devices
This patch fixes the following issues with SD and MMC interfaces on mackerel:
1. replace custom card-detection functions with standard GPIO CD API
2. resources don't have to be numbered
3. add SDHI interrupt names
4. remove OCR masks, where regulators are used
5. only specify SDHI CD interrupts on interfaces where a CD pin is present -
SDHI0
6. don't instantiate an MMCIF device and initialise MMCIF pins if SDHI1 is
selected
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Wed, 13 Feb 2013 10:34:03 +0000 (11:34 +0100)]
ARM: shmobile: switch SDHI0 to GPIO regulator on armadillo800eva
When regulators are used with MMC devices, explicitly provided OCR masks
are ignored, they can be removed from platform data. Also switch SDHI0
from fixed regulator with hard-wired GPIO levels to a proper GPIO regulator
instance to enable dynamic voltage switching.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Wed, 16 Jan 2013 07:54:18 +0000 (08:54 +0100)]
ARM: shmobile: use GPIO SD-card detection on armadillo800eva
Switch SDHI0 and SDHI1 SD-card interfaces on armadillo800eva to using GPIO
card detection, which provides maximum power saving and automatically
selects IRQ or polling mode, depending on the CD GPIO capability.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 18 Mar 2013 12:26:33 +0000 (21:26 +0900)]
Merge branches 'soc' and 'pinmux' into boards-base
Phil Edworthy [Thu, 31 Jan 2013 01:45:01 +0000 (02:45 +0100)]
r8a7779: Add Display Unit clock support
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
[Rename device from to rcarfb to rcar-du]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Manual conflict resolution]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 7 Mar 2013 12:59:26 +0000 (13:59 +0100)]
ARM: shmobile: r8a7779: Remove INTC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:59:26 +0000 (13:59 +0100)]
ARM: shmobile: r8a7779: Remove LBSC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:59:26 +0000 (13:59 +0100)]
ARM: shmobile: r8a7779: Remove USB function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:38:10 +0000 (14:38 +0100)]
ARM: shmobile: r8a7779: Remove HSPI function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:38:10 +0000 (14:38 +0100)]
ARM: shmobile: r8a7779: Remove SCIF function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:38:10 +0000 (14:38 +0100)]
ARM: shmobile: r8a7779: Remove SDHI and MMCIF function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: r8a7779: Remove DU function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 9 Jan 2013 21:32:25 +0000 (22:32 +0100)]
ARM: shmobile: r8a7779: Remove DU1_DOTCLKOUT1 GPIO
The function is not documented in the r8a7779 datasheet. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:38:10 +0000 (14:38 +0100)]
ARM: shmobile: r8a7740: Remove SDHI and MMCIF function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: r8a7740: Remove LCD0 and LCD1 function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:55:16 +0000 (18:55 +0100)]
ARM: shmobile: sh73a0: Remove IrDA function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:55:16 +0000 (18:55 +0100)]
ARM: shmobile: sh73a0: Remove USB function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:55:16 +0000 (18:55 +0100)]
ARM: shmobile: sh73a0: Remove BSC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:55:16 +0000 (18:55 +0100)]
ARM: shmobile: sh73a0: Remove KEYSC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:32:00 +0000 (18:32 +0100)]
ARM: shmobile: sh73a0: Remove pull-up function GPIOS
Those GPIOs have been deprecated by the pinconf API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: sh73a0: Remove FSI function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: sh73a0: Remove I2C function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: sh73a0: Remove SCIFA and SCIFB function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: sh73a0: Remove LCDC and LCDC2 function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:24:53 +0000 (14:24 +0100)]
ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:58:48 +0000 (13:58 +0100)]
sh-pfc: r8a7779: Remove INTC function GPIOS
All r8a7779 platforms now use the pinctrl API to control the INTC pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:58:48 +0000 (13:58 +0100)]
sh-pfc: r8a7779: Remove LBSC function GPIOS
All r8a7779 platforms now use the pinctrl API to control the LBSC pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:58:48 +0000 (13:58 +0100)]
sh-pfc: r8a7779: Remove USB function GPIOS
All r8a7779 platforms now use the pinctrl API to control the USB pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:36:28 +0000 (14:36 +0100)]
sh-pfc: r8a7779: Remove HSPI function GPIOS
All r8a7779 platforms now use the pinctrl API to control the HSPI pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:36:28 +0000 (14:36 +0100)]
sh-pfc: r8a7779: Remove SCIF function GPIOS
All r8a7779 platforms now use the pinctrl API to control the SCIF pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:36:28 +0000 (14:36 +0100)]
sh-pfc: r8a7779: Remove SDHI and MMCIF function GPIOS
All r8a7779 platforms now use the pinctrl API to control the SDHI and
MMCIF pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 9 Jan 2013 21:32:25 +0000 (22:32 +0100)]
sh-pfc: r8a7779: Remove DU1_DOTCLKOUT1 GPIO
The function is not documented in the r8a7779 datasheet. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:36:28 +0000 (14:36 +0100)]
sh-pfc: r8a7740: Remove SDHI and MMCIF function GPIOS
All r8a7740 platforms now use the pinctrl API to control the SDHI and
MMCIF pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: r8a7740: Remove LCD0 and LCD1 function GPIOS
All r8a7740 platforms now use the pinctrl API to control the LCD0 and
LCD1 pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 17:53:05 +0000 (18:53 +0100)]
sh-pfc: sh73a0: Remove IrDA function GPIOS
All sh73a0 platforms now use the pinctrl API to control the IrDA pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 17:53:05 +0000 (18:53 +0100)]
sh-pfc: sh73a0: Remove USB function GPIOS
All sh73a0 platforms now use the pinctrl API to control the USB pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 17:53:05 +0000 (18:53 +0100)]
sh-pfc: sh73a0: Remove BSC function GPIOS
All sh73a0 platforms now use the pinctrl API to control the BSC pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 17:53:05 +0000 (18:53 +0100)]
sh-pfc: sh73a0: Remove KEYSC function GPIOS
All sh73a0 platforms now use the pinctrl API to control the KEYSC pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 17:32:00 +0000 (18:32 +0100)]
sh-pfc: sh73a0: Remove pull-up function GPIOS
All sh73a0 platforms now use the pinconf API to control pull-ups, the
corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Remove FSI function GPIOS
All sh73a0 platforms now use the pinctrl API to control the FSI pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Remove I2C function GPIOS
All sh73a0 platforms now use the pinctrl API to control the I2C pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Remove SCIFA and SCIFB function GPIOS
All sh73a0 platforms now use the pinctrl API to control the SCIFA and
SCIFB pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Remove LCD and LCD2 function GPIOS
All sh73a0 platforms now use the pinctrl API to control the LCD and
LCD2 pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:23:17 +0000 (14:23 +0100)]
sh-pfc: sh7372: Remove SDHI and MMCIF function GPIOS
All sh7372 platforms now use the pinctrl API to control the SDHI and
MMCIF pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:46:02 +0000 (13:46 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for INTC
Replace the GPIO-based INTC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:46:02 +0000 (13:46 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for LBSC
Replace the GPIO-based LBSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:46:02 +0000 (13:46 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for USB
Replace the GPIO-based USB pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:22:11 +0000 (14:22 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for HSPI
Replace the GPIO-based HSPI pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:22:11 +0000 (14:22 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:22:11 +0000 (14:22 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:22:11 +0000 (14:22 +0100)]
ARM: shmobile: mackerel: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:23:50 +0000 (03:23 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for USB
Replace the GPIO-based USB pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:21:36 +0000 (03:21 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for BSC
Replace the GPIO-based BSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:23:50 +0000 (03:23 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for FSI
Replace the GPIO-based FSI pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for I2C
Replace the GPIO-based I2C pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for LCD
Replace the GPIO-based LCD pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for BSC
Replace the GPIO-based BSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for KEYSC
Replace the GPIO-based KEYSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Board code used the non-pulled-up version of the function GPIOs, but
those are defined in the PFC driver as enabling the pull-ups anyway.
Enable pull-ups on the MMCIF data and command pins through the pinconf
API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: bonito: Register pinctrl mappings for LCDC0
Replace the GPIO-based LCDC0 pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:34:23 +0000 (14:34 +0100)]
ARM: shmobile: armadillo800eva: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: armadillo800eva: Register pinctrl mappings for LCDC0
Replace the GPIO-based LCDC0 pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:21:27 +0000 (14:21 +0100)]
ARM: shmobile: ap4evb: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for IrDA
Replace the GPIO-based IrDA pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for KEYSC
Replace the GPIO-based KEYSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for FSI
Replace the GPIO-based FSI pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for I2C
Replace the GPIO-based I2C pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:38:51 +0000 (13:38 +0100)]
sh-pfc: r8a7779: Add INTC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:38:51 +0000 (13:38 +0100)]
sh-pfc: r8a7779: Add LBSC pin groups and functions
Only the CS pins and functions are currently handled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:38:51 +0000 (13:38 +0100)]
sh-pfc: r8a7779: Add USB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:36:36 +0000 (13:36 +0100)]
sh-pfc: r8a7779: Add USB0 and USB1 PENC pinmux support
The USB0 and USB1 PENC functions were missing. Add them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 18:04:43 +0000 (19:04 +0100)]
sh-pfc: r8a7779: Add HSPI pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 18:04:43 +0000 (19:04 +0100)]
sh-pfc: r8a7779: Add SCIF pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 18:04:43 +0000 (19:04 +0100)]
sh-pfc: r8a7779: Add SDHI and MMCIF pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: r8a7779: Add DU pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Guennadi Liakhovetski [Wed, 23 Jan 2013 16:37:44 +0000 (17:37 +0100)]
sh-pfc: r8a7740: Add SDHI and MMCIF pin groups and functions
Add pin groups for the first two SDHI interfaces and two alternative pin
groups for the MMCIF interface on the r8a7740 SoC.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add IrDA pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add USB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add BSC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add KEYSC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Guennadi Liakhovetski [Tue, 12 Feb 2013 15:50:03 +0000 (16:50 +0100)]
sh-pfc: sh73a0: Add SDHI and MMCIF pin groups and functions
Add pin group definitions for SDHI0, SDHI1, SDHI2 and MMCIF interfaces on
sh73a0.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add FSI pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add I2C2 and I2C3 pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add SCIFA and SCIFB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / log