drm/amd/amdgpu: Fix style errors in amdgpu_drv.c & amdgpu_device.c

Fix following checkpatch style errors in amdgpu_drv.c &
amdgpu_device.c

ERROR: exactly one space required after that #ifdef
ERROR: spaces required around that '+=' (ctx:WxV)
ERROR: space required before the open brace '{'
ERROR: spaces required around that '||' (ctx:VxE)
ERROR: space prohibited before that close parenthesis ')'
ERROR: space required before the open parenthesis '('
ERROR: space required before the open brace '{'
ERROR: code indent should use tabs where possible

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix spaces in array indexing and indentations in amdgpu_kms.c

Fix the following errors reported by checkpatch:

ERROR: space prohibited before open square bracket '['
+#define TA_FW_NAME(type) [TA_FW_TYPE_PSP_##type] = #type

ERROR: code indent should use tabs where possible
+        query_fw.fw_type = AMDGPU_INFO_FW_GFX_RLCV;$

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Drop pcie_bif ras check from fatal error handler

Some ASICs support fatal error event but do not
support pcie_bif ras.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix calltrace warning in amddrm_buddy_fini

The following call trace is observed when removing the amdgpu driver, which
is caused by that BOs allocated for psp are not freed until removing.

[61811.450562] RIP: 0010:amddrm_buddy_fini.cold+0x29/0x47 [amddrm_buddy]
[61811.450577] Call Trace:
[61811.450577]  <TASK>
[61811.450579]  amdgpu_vram_mgr_fini+0x135/0x1c0 [amdgpu]
[61811.450728]  amdgpu_ttm_fini+0x207/0x290 [amdgpu]
[61811.450870]  amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[61811.451012]  gmc_v9_0_sw_fini+0x4a/0x60 [amdgpu]
[61811.451166]  amdgpu_device_fini_sw+0x117/0x520 [amdgpu]
[61811.451306]  amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[61811.451447]  devm_drm_dev_init_release+0x4d/0x80 [drm]
[61811.451466]  devm_action_release+0x15/0x20
[61811.451469]  release_nodes+0x40/0xb0
[61811.451471]  devres_release_all+0x9b/0xd0
[61811.451473]  __device_release_driver+0x1bb/0x2a0
[61811.451476]  driver_detach+0xf3/0x140
[61811.451479]  bus_remove_driver+0x6c/0xf0
[61811.451481]  driver_unregister+0x31/0x60
[61811.451483]  pci_unregister_driver+0x40/0x90
[61811.451486]  amdgpu_exit+0x15/0x447 [amdgpu]

For smu v13_0_2, if the GPU supports xgmi, refer to

commit f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2"),

it will run gpu recover in AMDGPU_RESET_FOR_DEVICE_REMOVE mode when removing,
which makes all devices in hive list have hw reset but no resume except the
basic ip blocks, then other ip blocks will not call .hw_fini according to
ip_block.status.hw.

Since psp_free_shared_bufs just includes some software operations, so move
it to psp_sw_fini.

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Longlong Yao <Longlong.Yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reset OUTBOX0 r/w pointer on DMUB reset

[Why & How]
We missed resetting OUTBOX0 mailbox r/w pointer on DMUB reset.
Fix it.

Fixes: 6ecf9773a503 ("drm/amd/display: Fix DMUB outbox trace in S4 (#4465)")
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: initialize num_xcd to 1 for gfx v9_0

Assign value here as the num_xcd is referenced in some gfx9 common path.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add master/slave check in init phase

Skip KCQ setup on slave xcc as there's no use case.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clear GPINT1 before taking DMCUB out of reset

[Why]
Workaround for DMCUB front door load

[How]
Clear GPINT after reset so its consistent

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fixes for dcn32_clk_mgr implementation

[Why&How]
Fix CLK MGR early initialization and add logging.

Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add xcc index argument to rlc safe_mode func (v4)

v1: To support multple XCD case (Le)
v2: unify naming style (Le)
v3: apply the changes to gc v11_0 (Hawking)
v4: apply the changes to gc SOC21 (Morris)

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add xcc index argument to select_sh_se function v2

v1: To support multiple XCD case (Le)
v2: introduce xcc index to gfx_v11_0_select_sh_se (Hawking)

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add xcc index argument to gfx v9_4_3 functions

Change those v9_4_3 interfaces which are exposed in gfx_v9_0.c.
For some active single-xcc emu models, the code path in
gfx_v9_0.c is better to keep reserved for a while.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add multi-XCC initial support in gfx_v9_4_3.c

Each XCD needs to be initialized respectively. The major changes are:

  1. add iteration to do rlc/kiq/kcq init/fini for each xcd
  2. load rlc/mec microcode to each xcd
  3. add argument to specify xcc index in initialization functions

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add xcc index argument to soc15_grbm_select

To support grbm select for multiple XCD case.

v2: unify naming style

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: split gc v9_4_3 functionality from gc v9_0

To prepare for gc v9_4_3 specific feature.

v2: fix exports (Alex)

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add multi-xcc support to amdgpu_gfx interfaces (v4)

v1: Modify kiq_init/fini, mqd_sw_init/fini and
enable/disable_kcq to adapt to multi-die case.
Pass 0 as default to all asics with single xcc (Le)
v2: squash commits to avoid breaking the build (Le)
v3: unify naming style (Le)
v4: apply the changes to gc v11_0 (Hawking)

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: separate the mqd_backup for kiq from kcq

This will benifit the mqd indexing for kiq/kcq in multi XCD case.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move queue_bitmap to an independent structure (v3)

To allocate independent queue_bitmap for each XCD,
then the old bitmap policy can be continued to use
with a clear logic.

Use mec_bitmap[0] as default for all non-GC 9.4.3 IPs.

v2: squash commits to avoid breaking the build
v3: unify naming style

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: convert gfx.kiq to array type (v3)

v1: more kiq instances are a available in SOC (Le)
v2: squash commits to avoid breaking the build (Le)
v3: make the conversion for gfx/mec v11_0 (Hawking)

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon: avoid double free in ci_dpm_init()

Several calls to ci_dpm_fini() will attempt to free resources that
either have been freed before or haven't been allocated yet. This
may lead to undefined or dangerous behaviour.

For instance, if r600_parse_extended_power_table() fails, it might
call r600_free_extended_power_table() as will ci_dpm_fini() later
during error handling.

Fix this by only freeing pointers to objects previously allocated.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused variable oldest_index

cpp_check reports
drivers/gpu/drm/amd/display/modules/freesync/freesync.c:1143:17: style: Variable
  'oldest_index' is assigned a value that is never used. [unreadVariable]
   oldest_index = 0;
                ^

This variable is not used so remove.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix desktop freezed after gpu-reset

[Why]
After gpu-reset, sometimes the driver fails to enable vblank irq,
causing flip_done timed out and the desktop freezed.

During gpu-reset, we disable and enable vblank irq in dm_suspend() and
dm_resume(). Later on in amdgpu_irq_gpu_reset_resume_helper(), we check
irqs' refcount and decide to enable or disable the irqs again.

However, we have 2 sets of API for controling vblank irq, one is
dm_vblank_get/put() and another is amdgpu_irq_get/put(). Each API has
its own refcount and flag to store the state of vblank irq, and they
are not synchronized.

In drm we use the first API to control vblank irq but in
amdgpu_irq_gpu_reset_resume_helper() we use the second set of API.

The failure happens when vblank irq was enabled by dm_vblank_get()
before gpu-reset, we have vblank->enabled true. However, during
gpu-reset, in amdgpu_irq_gpu_reset_resume_helper() vblank irq's state
checked from amdgpu_irq_update() is DISABLED. So finally it disables
vblank irq again. After gpu-reset, if there is a cursor plane commit,
the driver will try to enable vblank irq by calling drm_vblank_enable(),
but the vblank->enabled is still true, so it fails to turn on vblank
irq and causes flip_done can't be completed in vblank irq handler and
desktop become freezed.

[How]
Combining the 2 vblank control APIs by letting drm's API finally calls
amdgpu_irq's API, so the irq's refcount and state of both APIs can be
synchronized. Also add a check to prevent refcount from being less then
0 in amdgpu_irq_put().

v2:
- Add warning in amdgpu_irq_enable() if the irq is already disabled.
- Call dc_interrupt_set() in dm_set_vblank() to avoid refcount change
  if it is in gpu-reset.

v3:
- Improve commit message and code comments.

Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fix spelling mistake "aquire" -> "acquire"

There is a spelling mistake in the smu_i2c_bus_access prototype. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add support for querying the max ibs in a submission. (v3)

This info would be used by radv to figure out when we need to
split a submission into multiple submissions. radv currently has
a limit of 192 which seems to work for most gfx submissions, but
is way too high for e.g. compute or sdma.

Userspace is available at
https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3

v3: Completely rewrote based on suggestion of making it a separate query.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2498
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add a max ibs per submission limit.

And ensure each ring supports that many submissions. This makes
sure that we don't get surprises after the submission has been
scheduled where the ring allocation actually gets rejected.

My calculations on the existing limits:
COMPUTE v10: 128
COMPUTE v11: 128
COMPUTE v6: 157
COMPUTE v7: 133
COMPUTE v8: 130
COMPUTE v9: 125
GFX v10: 208
GFX v11: 213
GFX v6: 154 (doubling this in the previous patch)
GFX v7: 226
GFX v8: 213
GFX v9: 208
GFX v9 (SW): 208
SDMA CIK: 87
SDMA SI: 97
SDMA v2.4: 74
SDMA v3.0: 74
SDMA v4.0: 72
SDMA v5.0: 51
SDMA v6.0: 52
UVD ENC v6.0: 98
UVD ENC v7.0: 92
UVD v3.1: 124
UVD v4.2: 124
UVD v5.0: 83
UVD v6.0  (VM): 55
UVD v7.0: 51
VCE v2.0: 126
VCE v3.0 (VM): 98
VCE v4.0: 93
VCN DEC v1.0: 49
VCN DEC v2.0: 51
VCN DEC v3.0: 51
VCN ENC v1.0: 58
VCN ENC v2.0: 93
VCN ENC v3.0: 93
VCN ENC v4.0: 93
VCN JPEG v1.0: 17
VCN JPEG v2.0: 16
VCN JPEG v2.5: 17
VCN JPEG v3.0: 17
VCN JPEG v4.0: 17

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2498
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Increase GFX6 graphics ring size.

To ensure it supports 192 IBs per submission, so we can keep a
simplified IB limit in the follow up patch without having to
look at IP or GPU version.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DTBCLK for DCN32

[Why&How]
- Implement interface to program DTBCLK DTO’s
  according to reference DTBCLK returned by PMFW
- This is required because DTO programming
  requires exact DTBCLK reference freq or it could
  result in underflow

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix is_timing_changed() prototype

Three functions in the amdgpu display driver cause -Wmissing-prototype
warnings:

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1858:6: error: no previous prototype for 'is_timing_changed' [-Werror=missing-prototypes]

is_timing_changed() is actually meant to be a global symbol, but needs
a proper name and prototype.

Fixes: 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add logging for display MALL refresh setting

[WHY]
Add log entry for when display refresh from MALL
settings are sent to SMU.

Fixes: 1664641ea946 ("drm/amd/display: Add logger for SMU msg")
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable migration to ensure consistency of per-CPU variable

[why]
Since the variable fpu_recursion_depth is per-CPU type, it has one copy
on each CPU, thread migration causes data consistency issue, then the
call trace shows up. And preemption disabling can't prevent migration.

[how]
Disable migration to ensure consistency of fpu_recursion_depth.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Write TEST_EDID_CHECKSUM_WRITE for EDID tests

Extract edid's checksum and send it back for verification if EDID_TEST
is requested.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove incorrect early return

[Why&How]
Remove incorrect early return in a device specific fifo reset workaround

Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Return error code on DSC atomic check failure

[Why&How]
We were not returning -EINVAL on DSC atomic check fail. Add it.

Fixes: 71be4b16d39a ("drm/amd/display: dsc validate fail not pass to atomic check")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add mechanism to skip DCN init

[Why]
If optimized init is done in FW. DCN init can be skipped in driver. This
need to be communicated between driver and fw and maintain backwards
compatibility.

[How]
Use DMUB scratch 0 bit 2 to indicate optimized init done in fw and
use DMUB scatch 4 bit 0 to indicate drive supports the optimized flow
so FW will perform it.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set dcn315 lb bpp to 48

[Why & How]
Fix a typo for dcn315 line buffer bpp.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: limit timing for single dimm memory

[Why]
1. It could hit bandwidth limitdation under single dimm
memory when connecting 8K external monitor.
2. IsSupportedVidPn got validation failed with
2K240Hz eDP + 8K24Hz external monitor.
3. It's better to filter out such combination in
EnumVidPnCofuncModality
4. For short term, filter out in dc bandwidth validation.

[How]
Force 2K@240Hz+8K@24Hz timing validation false in dc.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Improvement for handling edp link training fails

[Why]
The eDP retrain will cause the DPCD 300 to be reset to default.
And cause the brightness can't be set correctly.

[How]
delete the call to edp panel power control in both
enable_link_output/disable_link_output entirely and
only call edp panel control in enable_link_dp and 
disable_link_dp once.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Apply correct panel mode when reinitializing hardware

[Why]
When link training during engine recovery, ASSR might fail causing panel
mode to be reset to default. This should not happen for eDP as it
will prevent the panel from turning back on.

[How]
Added dp_panel_mode to struct dc_link to remember previously applied
panel mode. Do not reset panel mode to default while performing link
training if previously used panel mode = eDP.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add extra dc odm debug options

[Why & How]
Add options for dc odm debug.

Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix a divided-by-zero error

[Why & How]

timing.dsc_cfg.num_slices_v can be zero and it is necessary to check
before using it.

This fixes the error "divide error: 0000 [#1] PREEMPT SMP NOPTI".

Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.162.0

 - Add DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE command
 - Remove d3 entry event and instead check for stream mask
 - dmu: Enable timeout recovery and detection for p-state

Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable FPO + Vactive

[Description]
- Enable FPO + Vactive

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set watermarks set D equal to A

[Description]
- Since we do not use optimized watermark settings for MALL,
  set D = A
- PMFW uses Set D for d0i3.1, so driver should make D = A for the
  time being
- If we choose to optimize in the future we can set watermarks D
  correctly

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct output color space during HW reinitialize

[Why]
Doing core_link_disable_stream or set_dpms_off when reinitializing
hardware causes issue to repro with external display connected. This is
unnecessary, blanking pixel data should be sufficient.

[How]
Call disable_pixel_data while reinitializing hardware instead of
core_link_disable_stream or set_dpms_off.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DSC policy override when ODM combine is forced

[why]
When we force ODM combine with DSC, we lose several
8 bit and 10 bit modes in validation and thus
not able to use HDR. This is due to the number of
horizontal slices used in DSC not properly being
accounted for currently when 2:1 ODM Combine is forced.

[how]
Enforce at least two horizontal slices are used for DSC when
ODM combine is forced.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nasir Osman <nasir.osman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding support for VESA SCR

[HOW&WHY]
Write DPCD 721 bit 7 to high, and
the appropriate luminance level
to DPCD 734-736 if bit 4 from DPCD register
734 is high, indicating that the panel
luminance control is enabled from the panel side.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add FAMS validation before trying to use it

To ensure that FAMS can be used, DC must check if there is VRR support.
This commit adds the required configuration to ensure FAMS can be executed in the target system.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix access hdcp_workqueue assert

[Why] hdcp are enabled for asics from raven. for old asics
which hdcp are not enabled, hdcp_workqueue are null. some
access to hdcp work queue are not guarded with pointer check.

[How] add hdcp_workqueue pointer check before access workqueue.

Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: drain dmub inbox if queue is full

[Why & How]
If dmub command queuing fails due to the inbox being full, flush the
inbox and resubmit the comamnd. This was previously the default behavior
but was lost in a refactor.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refactor dmub commands into single function

[Why & How]
Consolidate dmub access to a single interface. This makes it easier to
add code in the future that needs to run every time a dmub command is
requested (e.g. instrumentation, locking etc).

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce SubVP + DRR stretch margin

[Description]
- Having excessively large margin causes failure in the static
  schedulability check in some cases for SubVP + DRR
- 100us of DRR margin is sufficient based on a weeks worth of
  stress testing on different display configs

Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only consider DISPCLK when using optimized boot path

[Description]
- Previous bug fix for audio issue included dtbclk and p-state
  on the optimized boot path which is incorarect
- We only care about DISPCLK in the optimized vs. non-optimized
  boot path to avoid audio issues

Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update max streams per surface

Increse to 6 as that is the max surfaces supported asics can have.
The is no practical use case yet, but this is valuable for pre-si
validation.

Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix memleak in aconnector->timing_requested

[Why]
when amdgpu_dm_update_connector_after_detect is called
two times successively with valid sink, memory allocated of
aconnector->timing_requested for the first call is not free.
this causes memeleak.

[How]
allocate memory only when aconnector->timing_requested
is null.

Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix hang when skipping modeset

[Why&How]

When skipping full modeset since the only state change was a front porch
change, the DC commit sequence requires extra checks to handle non
existant plane states being asked to be removed from context.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix in disabling secure display

[Why]
Currently we don't check if secure display is enabled before we send
command to disable secure display in dmub. It will accidentally cause
some other igt tests to fail, eg, crtc-linear-degamma.

[How]
Refactor the code we reset the secure display state to check secure
display was enabled or not before stopping it in dmub.

Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: allow edp updates for virtual signal

[Why]
When IGT's kms_hdmi_inject forces EDID for HDMI audio, dc rejects the
request because virtual signal is not in dc_is_audio_capable_signal
function.

[How]
Includes SIGNAL_TYPE_VIRTUAL as audio capable.

Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenchieh Chien <wenchieh.chien@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: copy dmub caps to dc on dcn31

[Why & How]
Add code path to copy dmub caps to dc, which is missing on dcn31

Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing WA and MCLK validation

When the commit fff7eb56b376 ("drm/amd/display: Don't set dram clock
change requirement for SubVP") was merged, we missed some parts
associated with the MCLK switch. This commit adds all the missing parts.

Fixes: fff7eb56b376 ("drm/amd/display: Don't set dram clock change requirement for SubVP")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Block optimize on consecutive FAMS enables

[WHY]
It is possible to commit state multiple times in rapid succession with
FAMS enabled; if each of these commits were to set optimized_required,
then the user may see latency.

[HOW]
fw_based_mclk_switching is currently not used in dc->clk_mgr; use it
to track whether the current state has FAMS enabled;
if it has, then do not disable FAMS in prepare_bandwidth, and do not set
optimized_required.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not set drr on pipe commit

[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.

[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.

This change expects that Freesync requests are blocked when
optimized_required is true.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix ABM pipe/backlight issues when change backlight

[Why]
set ABM pipe/backlight gets some issues when abm callback func pointers
are NULL. For some usecase, driver would like to control PWM level before
ABM resource is ready. However, recent flow refactor of ABM didn't
consider that use case.

[How]
Rollback flow that sending inbox command to dmub directly when ABM
function pointers aren't ready.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check & log if receiver supports MST, DSC & FEC.

After reading from receiver via DPCD, check & log if it supports MST,
DSC & FEC

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Unconditionally print when DP sink power state fails

The previous 'commit ca9beb8aac68 ("drm/amd/display: Add logging when
setting DP sink power state fails")', it is better to unconditionally
print "failed to power up sink", because we are returning
DC_ERROR_UNEXPECTED.

Fixes: ca9beb8aac68 ("drm/amd/display: Add logging when setting DP sink power state fails")
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor ABM feature

[Why]
Refactor ABM feature and implement inbox command for DMUB.

[How]
Implement the ioctl to send inbox command to DMUB.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set variable dccg314_init storage-class-specifier to static

smatch reports
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:277:6: warning: symbol
  'dccg314_init' was not declared. Should it be static?

This variable is only used in one file so should be static.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use pointer in the memcpy

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove wrong assignment of DP link rate

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set dp_rate to dm_dp_rate_na by default

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set maximum VStartup if is DCN201

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adjust code identation and other minor details

This commit replaces spaces with tabs in multiple functions and adjusts
the indentation in some other parts of the code to improve readability.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing mclk update

When using FPO, there is some misconfiguration that happens for the lack
of configuration of the MCLK switch in some circumstances. This commit
adds the required field update when using the MCLK switch.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update bouding box values for DCN32

All clock values came from firmware, but bounding box values can be
helpful in some debug situations. This commit updates some of the values
associated with clock speed and memory channels.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: release gpu full access after "amdgpu_device_ip_late_init"

[WHY]
 Function "amdgpu_irq_update()" called by "amdgpu_device_ip_late_init()" is an atomic context.
 We shouldn't access registers through KIQ since "msleep()" may be called in "amdgpu_kiq_rreg()".

[HOW]
 Move function "amdgpu_virt_release_full_gpu()" after function "amdgpu_device_ip_late_init()",
 to ensure that registers be accessed through RLCG instead of KIQ.

Call Trace:
  <TASK>
  show_stack+0x52/0x69
  dump_stack_lvl+0x49/0x6d
  dump_stack+0x10/0x18
  __schedule_bug.cold+0x4f/0x6b
  __schedule+0x473/0x5d0
  ? __wake_up_klogd.part.0+0x40/0x70
  ? vprintk_emit+0xbe/0x1f0
  schedule+0x68/0x110
  schedule_timeout+0x87/0x160
  ? timer_migration_handler+0xa0/0xa0
  msleep+0x2d/0x50
  amdgpu_kiq_rreg+0x18d/0x1f0 [amdgpu]
  amdgpu_device_rreg.part.0+0x59/0xd0 [amdgpu]
  amdgpu_device_rreg+0x3a/0x50 [amdgpu]
  amdgpu_sriov_rreg+0x3c/0xb0 [amdgpu]
  gfx_v10_0_set_gfx_eop_interrupt_state.constprop.0+0x16c/0x190 [amdgpu]
  gfx_v10_0_set_eop_interrupt_state+0xa5/0xb0 [amdgpu]
  amdgpu_irq_update+0x53/0x80 [amdgpu]
  amdgpu_irq_get+0x7c/0xb0 [amdgpu]
  amdgpu_fence_driver_hw_init+0x58/0x90 [amdgpu]
  amdgpu_device_init.cold+0x16b7/0x2022 [amdgpu]

Signed-off-by: Chong Li <chongli2@amd.com>
Reviewed-by: JingWen.Chen2@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: change pmfw_decoded_link_width, speed variables to globals

gcc with W=1 reports
In file included from drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:36:
./drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v13_0.h:66:18: error:
  ‘pmfw_decoded_link_width’ defined but not used [-Werror=unused-const-variable=]
   66 | static const int pmfw_decoded_link_width[7] = {0, 1, 2, 4, 8, 12, 16};
      |                  ^~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v13_0.h:65:18: error:
  ‘pmfw_decoded_link_speed’ defined but not used [-Werror=unused-const-variable=]
   65 | static const int pmfw_decoded_link_speed[5] = {1, 2, 3, 4, 5};
      |                  ^~~~~~~~~~~~~~~~~~~~~~~

These variables are defined and used in smu_v13_0_7_ppt.c and smu_v13_0_0_ppt.c.
There should be only one definition.  So define the variables as globals
in smu_v13_0.c

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: fix mmsch ctx table size

add jpeg table size to ctx table size rather than override it

Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: JingWen Chen <JingWen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-6.4-2023-04-14' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.4-2023-04-14:

amdgpu:
- S4 fixes for APUs
- GFX11 fixes
- Misc code cleanups
- DCN 3.2 fixes
- DCN 3.1.4 fixes
- FPO/FAMS work to improve display power savings
- DP fixes
- UMC 8.10 code cleanup
- SDMA v4 fix
- GPU clock counter fixes
- SMU 13 fixes
- Sdma v6 invalidation fix for preemption
- RAS fixes
- S0ix fix
- GC 9.4.3 updates

amdkfd:
- Fix user pointers with IOMMU
- Fix coherency flag handling

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230414204609.7942-1-alexander.deucher@amd.com

drm/amdgpu: add some basic elements for multiple XCD case

Add some basic definitions and structure member. Inscrease MAX_WB slots
to 1024 to support the increasing number of rings for multiple partitions.

v2: unify naming style

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)

It looks better to place this field in ring
structure. Also drop the repeated ring funcs definitions
if there's no difference except for vmhub field.

v2: rename the field to vm_hub like others (Le)
v3: apply the changes to new ip blocks (Hawking)
v4: fix vcn sw ring (Alex)

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"

This reverts commit fe120b9f5ce873516a2604e4ff0c19084be94e8c.
This patch impacts sriov multi-vf stability

Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add common ip block for GC 9.4.3

Add common IP handling for GC 9.4.3

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add logging when DP link training Clock recovery is Successful

Log when Clock recovery is successful, as part of
DP link training process.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add common early init support for GC 9.4.3

init asic funcs and cp/pg flags for GC 9.4.3

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3

add gfx_funcs callbacks implemenation based on
gc_v9_4_3 ip headers

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add logging when setting DP sink power state fails

Log if we fail to setup sink power states.

Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add gfx_target_version for GC 9.4.3

Required for Thunk GFX version sysfs query.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3

GC 9.4.3 uses the hardware to update AQL queues read pointer, so
remove CP_HQD_PQ_CONTROL__NO_UPDATE_RPTR_MASK flag from MQD if it's
GC 9.4.3, and keep it for other existing gfx9 ASICs.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reserve the old gc_11_0_*_mes.bin

Reserve the MOUDLE_FIRMWARE declaration of gc_11_0_*_mes.bin
to fix falling back to old mes bin on failure via autoload.

Fixes: 97998b893c30 ("drm/amd/amdgpu: introduce gc_*_mes_2.bin v2")
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change the reference clock for raven/raven2

Due to switch to golden tsc register to get clock counter for raven/ raven2.
Chang the reference clock from 25MHZ to 100MHZ.

Suggested-by: shanshengwang <shansheng.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip kfd-iommu suspend/resume for S0ix

GFX is in gfxoff mode during s0ix so we shouldn't need to
actually execute kfd_iommu_suspend/kfd_iommu_resume operation.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gc v9_4_3 rlc_funcs implementation

all the gc v9_4_3 registers fall in gc_rlcpdec address range
have different relative offsets and base_idx from the ones
defined in gc v9_0 ip headers. gc_v9_0_rlc_funcs can not be
reused anymore for gc v9_4_3

v2: drop unused handshake function (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-next-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Just one Cc:stable fix for sampler indirect state in bindless heap.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZDfxo+PXyw9ivFLI@jlahtine-mobl.ger.corp.intel.com

drm/amdgpu: drop temp programming for pagefault handling

Was introduced as workaround. not needed anymore

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: include protection for doorbell.h

This patch adds double include protection for doorbell.h

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rename num_doorbells

Rename doorbell.num_doorbells to doorbell.num_kernel_doorbells to
make it more readable.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to golden tsc registers for raven/raven2

Due to raven/raven2 maybe enable  sclk slow down,
they cannot get clock count by the RLC at the auto level of dpm performance.
So switch to golden tsc register.

Suggested-by: shanshengwang <shansheng.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the pcie link state check for SMU13

Update the driver implementations to fit those data exposed
by PMFW.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gfx v11_0_3 fed irq handling for sriov

Add gfx v11_0_3 fed irq handling for sriov.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Rework retry fault removal

Rework retry fault removal from the software filter by
storing an expired timestamp for a fault that is being removed.
When a new fault comes, and it matches an entry in the sw filter,
it will be added as a new fault only when its timestamp is greater
than the timestamp expiry of the fault in the sw filter.
This helps in avoiding stale faults being added back into the
filter and preventing legitimate faults from being handled.

Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable IH retry CAM on GFX9

This patch enables the IH retry CAM on GFX9 series cards. This
retry filter is used to prevent sending lots of retry interrupts
in a short span of time and overflowing the IH ring buffer. This
will also help reduce CPU interrupt workload.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>