Mans Rullgard [Sat, 15 Jul 2023 16:41:59 +0000 (17:41 +0100)]
Bluetooth: btbcm: add default address for BCM43430A1
The BCM43430A1 has a default MAC address of AA:AA:AA:AA:AA:AA.
Although, unlike some other entries, this does not include the
chip name, it is clearly not a real address. This was found in
AzureWave AW-NB197SM and AW-NM372SM modules.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 13 Jul 2023 21:02:37 +0000 (14:02 -0700)]
Bluetooth: ISO: Add support for BT_PKT_STATUS
This adds support for BT_PKT_STATUS socketopt by setting
BT_SK_PKT_STATUS. Then upon receiving an ISO packet the code would
attempt to store the Packet_Status_Flag to hci_skb_pkt_status which
is then forward to userspace in the form of BT_SCM_PKT_STATUS whenever
BT_PKT_STATUS has been enabled/set.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 13 Jul 2023 20:41:31 +0000 (13:41 -0700)]
Bluetooth: af_bluetooth: Make BT_PKT_STATUS generic
This makes the handling of BT_PKT_STATUS more generic so it can be
reused by sockets other than SCO like BT_DEFER_SETUP, etc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chris Lu [Thu, 13 Jul 2023 07:11:06 +0000 (15:11 +0800)]
Bluetooth: btmtk: Fix kernel crash when processing coredump
There may be a potential kernel crash risk if 'skb->len
- MTK_COREDUMP_END_LEN' value is less than 0 when doing
memcmp in btmtk_process_coredump().
Check the value is valid before doing memcmp.
[215.021695] Unable to handle kernel paging request at
virtual address
ffffff939fffd3c5
[215.021781] Mem abort info:
[215.021805] ESR = 0x96000005
[215.021833] EC = 0x25: DABT (current EL), IL = 32 bits
[215.021861] SET = 0, FnV = 0
[215.021875] EA = 0, S1PTW = 0
[215.021886] Data abort info:
[215.021899] ISV = 0, ISS = 0x00000005
[215.021912] CM = 0, WnR = 0
[215.021929] swapper pgtable: 4k pages, 39-bit VAs,
pgdp=
00000000410de000
[215.021943] [
ffffff939fffd3c5] pgd=
0000000000000000,
p4d=
0000000000000000, pud=
0000000000000000
[215.021979] Internal error: Oops:
96000005 [#1] PREEMPT SMP
[215.022496] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.186#3
(HASH:ad23 4)
[215.022511] Hardware name: MediaTek Tomato board (DT)
[215.022530] pstate:
80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[215.022556] pc : __pi_memcmp+0xd0/0x1b8
[215.022579] lr : btmtk_process_coredump+0xb0/0x5f8 [btmtk]
[215.022593] sp :
ffffffc010003d40
[215.022607] x29:
ffffffc010003d40 x28:
0000000000000006
[215.022633] x27:
ffffffda696350c0 x26:
0000000000000002
[215.022659] x25:
00000000000003ff x24:
ffffff9360cca804
[215.022685] x23:
0000000000000000 x22:
ffffff9365638500
[215.022710] x21:
ffffff9365638700 x20:
0000000000000000
[215.022736] x19:
ffffff936002e000 x18:
0000000000000000
[215.022761] x17:
0000000000000180 x16:
ffffffda6881b8b4
[215.022787] x15:
0000000000000001 x14:
0000000000002d00
[215.022812] x13:
0000000000060000 x12:
0000000000000181
[215.022837] x11:
0000000000000006 x10:
fffffffffffffffd
[215.022862] x9 :
0000000000000006 x8 :
0000000000000003
[215.022887] x7 :
0000000000000000 x6 :
0000000000000000
[215.022913] x5 :
ffffff93656387b8 x4 :
0000000000000000
[215.022938] x3 :
ffffffc010003c18 x2 :
0000000000000006
[215.022963] x1 :
ffffffda09d4124a x0 :
ffffff939fffd3c5
[215.022989] Call trace:
[215.023012] __pi_memcmp+0xd0/0x1b8
[215.023053] btusb_recv_acl_mtk+0x64/0x90 [btusb (HASH:dc6b 5)]
[215.023087] btusb_recv_bulk+0x118/0x170 [btusb (HASH:dc6b 5)]
[215.023121] btusb_bulk_complete+0x8c/0x148 [btusb (HASH:dc6b 5)]
[215.023144] __usb_hcd_giveback_urb+0xbc/0x148
[215.023164] usb_giveback_urb_bh+0xb4/0x190
[215.023184] tasklet_action_common+0x98/0x1a0
[215.023201] tasklet_action+0x2c/0x38
[215.023220] __do_softirq+0xe0/0x38c
[215.023241] invoke_softirq+0x34/0x6c
[215.023258] irq_exit+0x6c/0xb0
[215.023279] __handle_domain_irq+0x98/0xd4
[215.023296] gic_handle_irq+0x5c/0x11c
[215.023313] el1_irq+0xd0/0x180
[215.023332] cpuidle_enter_state+0xac/0x338
[215.023349] cpuidle_enter+0x40/0x70
[215.023366] do_idle+0x150/0x278
[215.023384] cpu_startup_entry+0x2c/0x58
[215.023401] rest_init+0xdc/0xec
[215.023419] arch_call_rest_init+0x18/0x24
[215.023435] start_kernel+0x334/0x400
[215.023460] Code:
91002129 eb09010a 9a89810b cb0b0042 (
38401403)
[215.023478] ---[ end trace
28668fd20c7a90cd ]
Fixes:
2822cd0173ad ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Roger Gammans [Wed, 12 Jul 2023 21:36:02 +0000 (22:36 +0100)]
Bluetooth: btusb: Add support for another MediaTek 7922 VID/PID
This one is found on the Dell Inspiron 2-in-1 7435
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e0f1 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=
000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Roger Gammans <rgammans@gammascience.co.uk>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ying Hsu [Wed, 5 Jul 2023 21:06:47 +0000 (21:06 +0000)]
Bluetooth: Fix hci_suspend_sync crash
If hci_unregister_dev() frees the hci_dev object but hci_suspend_notifier
may still be accessing it, it can cause the program to crash.
Here's the call trace:
<4>[102152.653246] Call Trace:
<4>[102152.653254] hci_suspend_sync+0x109/0x301 [bluetooth]
<4>[102152.653259] hci_suspend_dev+0x78/0xcd [bluetooth]
<4>[102152.653263] hci_suspend_notifier+0x42/0x7a [bluetooth]
<4>[102152.653268] notifier_call_chain+0x43/0x6b
<4>[102152.653271] __blocking_notifier_call_chain+0x48/0x69
<4>[102152.653273] __pm_notifier_call_chain+0x22/0x39
<4>[102152.653276] pm_suspend+0x287/0x57c
<4>[102152.653278] state_store+0xae/0xe5
<4>[102152.653281] kernfs_fop_write+0x109/0x173
<4>[102152.653284] __vfs_write+0x16f/0x1a2
<4>[102152.653287] ? selinux_file_permission+0xca/0x16f
<4>[102152.653289] ? security_file_permission+0x36/0x109
<4>[102152.653291] vfs_write+0x114/0x21d
<4>[102152.653293] __x64_sys_write+0x7b/0xdb
<4>[102152.653296] do_syscall_64+0x59/0x194
<4>[102152.653299] entry_SYSCALL_64_after_hwframe+0x5c/0xc1
This patch holds the reference count of the hci_dev object while
processing it in hci_suspend_notifier to avoid potential crash
caused by the race condition.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Lee, Chun-Yi [Mon, 10 Jul 2023 15:17:23 +0000 (23:17 +0800)]
Bluetooth: hci_ldisc: check HCI_UART_PROTO_READY flag in HCIUARTGETPROTO
This patch adds code to check HCI_UART_PROTO_READY flag before
accessing hci_uart->proto. It fixes the race condition in
hci_uart_tty_ioctl() between HCIUARTSETPROTO and HCIUARTGETPROTO.
This issue bug found by Yu Hao and Weiteng Chen:
BUG: general protection fault in hci_uart_tty_ioctl [1]
The information of C reproducer can also reference the link [2]
Reported-by: Yu Hao <yhao016@ucr.edu>
Closes: https://lore.kernel.org/all/CA+UBctC3p49aTgzbVgkSZ2+TQcqq4fPDO7yZitFT5uBPDeCO2g@mail.gmail.com/ [1]
Reported-by: Weiteng Chen <wchen130@ucr.edu>
Closes: https://lore.kernel.org/lkml/CA+UBctDPEvHdkHMwD340=n02rh+jNRJNNQ5LBZNA+Wm4Keh2ow@mail.gmail.com/T/ [2]
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Christophe JAILLET [Tue, 11 Jul 2023 17:41:10 +0000 (19:41 +0200)]
Bluetooth: hci_debugfs: Use kstrtobool() instead of strtobool()
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chris Lu [Fri, 7 Jul 2023 06:29:59 +0000 (14:29 +0800)]
Bluetooth: btusb: Add new VID/PID 04ca/3804 for MT7922
Add VID 04ca & PID 3804 for MediaTek MT7922 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3804 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=
000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chris Lu [Fri, 7 Jul 2023 06:29:58 +0000 (14:29 +0800)]
Bluetooth: btusb: Add new VID/PID 0489/e102 for MT7922
Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e102 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=
000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 6 Jul 2023 19:06:32 +0000 (12:06 -0700)]
Bluetooth: MGMT: Fix always using HCI_MAX_AD_LENGTH
HCI_MAX_AD_LENGTH shall only be used if the controller doesn't support
extended advertising, otherwise HCI_MAX_EXT_AD_LENGTH shall be used
instead.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Douglas Anderson [Fri, 30 Jun 2023 22:33:15 +0000 (15:33 -0700)]
Bluetooth: hci_sync: Don't double print name in add/remove adv_monitor
The hci_add_adv_monitor() hci_remove_adv_monitor() functions call
bt_dev_dbg() to print some debug statements. The bt_dev_dbg() macro
automatically adds in the device's name. That means that we shouldn't
include the name in the bt_dev_dbg() calls.
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Kiran K [Tue, 4 Jul 2023 08:16:51 +0000 (13:46 +0530)]
Bluetooth: Add support for Gale Peak (8087:0036)
Devices from /sys/kernel/debug/usb/devices:
T: Bus=09 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0036 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chris Lu [Fri, 30 Jun 2023 13:32:30 +0000 (21:32 +0800)]
Bluetooth: btusb: Add a new VID/PID 0489/e0f6 for MT7922
Add VID/PID 0489/e0f6 for MediaTek MT7922 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e0f6 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=
000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dan Carpenter [Mon, 3 Jul 2023 14:17:16 +0000 (17:17 +0300)]
Bluetooth: msft: Fix error code in msft_cancel_address_filter_sync()
Return negative -EIO instead of positive EIO.
Fixes:
926df8962f3f ("Bluetooth: msft: Extended monitor tracking by address filter")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Iulia Tanasescu [Mon, 3 Jul 2023 07:02:38 +0000 (10:02 +0300)]
Bluetooth: ISO: Notify user space about failed bis connections
Some use cases require the user to be informed if BIG synchronization
fails. This commit makes it so that even if the BIG sync established
event arrives with error status, a new hconn is added for each BIS,
and the iso layer is notified about the failed connections.
Unsuccesful bis connections will be marked using the
HCI_CONN_BIG_SYNC_FAILED flag. From the iso layer, the POLLERR event
is triggered on the newly allocated bis sockets, before adding them
to the accept list of the parent socket.
From user space, a new fd for each failed bis connection will be
obtained by calling accept. The user should check for the POLLERR
event on the new socket, to determine if the connection was successful
or not.
The HCI_CONN_BIG_SYNC flag has been added to mark whether the BIG sync
has been successfully established. This flag is checked at bis cleanup,
so the HCI LE BIG Terminate Sync command is only issued if needed.
The BT_SK_BIG_SYNC flag indicates if BIG create sync has been called
for a listening socket, to avoid issuing the command everytime a BIGInfo
advertising report is received.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Valentin David [Sun, 2 Jul 2023 21:01:38 +0000 (23:01 +0200)]
Bluetooth: btusb: Add device 0489:e0f5 as MT7922 device
Asus ROG Ally gaming computer has a MediaTek MT7922 chip that uses USB id
0489:e0f5 and needs to be added to the table. Without this, the device is
not usable and gives the following error:
Bluetooth: hci0: Opcode 0x c03 failed: -110
Output from /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e0f5 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=
000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Valentin David <valentin.david@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Wed, 28 Jun 2023 19:15:53 +0000 (12:15 -0700)]
Bluetooth: hci_conn: Always allocate unique handles
This attempts to always allocate a unique handle for connections so they
can be properly aborted by the likes of hci_abort_conn, so this uses the
invalid range as a pool of unset handles that way if userspace is trying
to create multiple connections at once each will be given a unique
handle which will be considered unset.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Tue, 27 Jun 2023 22:55:47 +0000 (15:55 -0700)]
Bluetooth: hci_sync: Fix not handling ISO_LINK in hci_abort_conn_sync
ISO_LINK connections where not being handled properly on
hci_abort_conn_sync which sometimes resulted in sending the wrong
commands, or in case of having the reject command being sent by the
socket code (iso.c) which is sort of a layer violation.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Tue, 27 Jun 2023 00:25:06 +0000 (17:25 -0700)]
Bluetooth: hci_conn: Consolidate code for aborting connections
This consolidates code for aborting connections using
hci_cmd_sync_queue so it is synchronized with other threads, but
because of the fact that some commands may block the cmd_sync_queue
while waiting specific events this attempt to cancel those requests by
using hci_cmd_sync_cancel.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jing Cai [Wed, 28 Jun 2023 22:54:57 +0000 (06:54 +0800)]
Bluetooth: btusb: mediatek: add MediaTek devcoredump support
This patch implement function .coredump() and dmp_hdr() in btusb
driver for MediaTek controller. FW core dump was triggered by FW
specific event to show something unexpected happened in the controller.
The driver would be responsible for collecting and uploading the device
core dump pieces in hci driver using core dump API. Once we finished
the whole process, the driver would reset the controller to recover the
kind of fatal error.
Co-developed-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jing Cai [Wed, 28 Jun 2023 22:54:56 +0000 (06:54 +0800)]
Bluetooth: btmtk: introduce btmtk reset work
Introduce btmtk_reset_work which can be called whenever the firmware abort,
HCI command timeout, other fatal error happen.
Co-developed-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sean Wang [Wed, 28 Jun 2023 22:54:55 +0000 (06:54 +0800)]
Bluetooth: btusb: mediatek: readx_poll_timeout replaces open coding
Use readx_poll_timeout instead of open coding to poll the hardware reset
status until it is done.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chris Lu [Wed, 28 Jun 2023 22:20:03 +0000 (06:20 +0800)]
Bluetooth: btmtk: add printing firmware information
Add printing firmware information part when driver loading firmware that
user can get mediatek bluetooth information.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Kiran K [Wed, 28 Jun 2023 12:18:31 +0000 (17:48 +0530)]
Bluetooth: btintel: Add support for Gale Peak
Add hardware variant(0x1c) for Gale Peak core (CNVi).
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Claudia Draghicescu [Thu, 29 Jun 2023 13:45:18 +0000 (16:45 +0300)]
Bluetooth: hci_sync: Enable events for BIS capable devices
In the case of a Synchronized Receiver capable device, enable at start-up the
events for PA reports, PA Sync Established and Big Info Adv reports.
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hilda Wu [Wed, 21 Jun 2023 10:00:31 +0000 (18:00 +0800)]
Bluetooth: msft: Extended monitor tracking by address filter
Since limited tracking device per condition, this feature is to support
tracking multiple devices concurrently.
When a pattern monitor detects the device, this feature issues an address
monitor for tracking that device. Let pattern monitor can keep monitor
new devices.
This feature adds an address filter when receiving a LE monitor device
event which monitor handle is for a pattern, and the controller started
monitoring the device. And this feature also has cancelled the monitor
advertisement from address filters when receiving a LE monitor device
event when the controller stopped monitoring the device specified by an
address and monitor handle.
Below is an example to know the feature adds the address filter.
//Add MSFT pattern monitor
< HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420
03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF
> HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960
Vendor (0x3f|0x00f0) ncmd 2
Status: Success (0x00)
03 00
//Got event from the pattern monitor
> HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953
23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'.
00 01 ..
//Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB)
< HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067
03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'.
//Report to userspace about found device (ADV Monitor Device Found)
@ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042
01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'.........
0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF.....
c1 03 03 03 12 18 ......
//Got event from address monitor
> HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956
23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'.
01 01
Signed-off-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Peter Tsao [Tue, 20 Jun 2023 08:27:50 +0000 (16:27 +0800)]
Bluetooth: btusb: Add support Mediatek MT7925
This patch is added support Mediatek MT7925.
1. The firmware location of MT7925 will set to
/lib/firmware/mediatek/mt7925
2. Add Mediatek private data in hdev
to record the device for handle MT7925 flow.
3. Use the recoreded dev_id to condition chip reset flow.
The information in /sys/kernel/debug/usb/devices about the MT7925U
Bluetooth device is listed as the below
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 27 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0e8d ProdID=7925 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=
000000000
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 5 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8f(I) Atr=03(Int.) MxPS= 2 Ivl=125us
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
I:* If#= 3 Alt= 0 #EPs= 9 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 2 Ivl=125us
Signed-off-by: Peter Tsao <peter.tsao@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Kiran K [Sun, 11 Jun 2023 06:43:42 +0000 (12:13 +0530)]
Bluetooth: btintel: Add support to reset bluetooth via ACPI DSM
New Intel platforms supports reset of Bluetooth device via ACPI DSM
methods. The legacy reset mechanism via GPIO will be deprecated in
future. This patch checks the platform support for reset methods and if
supported uses the same instead of legacy GPIO toggling method.
ACPI firmware supports two types of reset method based on NIC card.
(Discrete or Integrated).
1. VSEC Type - Vendor Specific Extended Capability. Here BT_EN and
BT_IF_SELECT lines are driven by a register in PCH cluster. This
interface is supported on discrete BT solution.
2. WDISABLE2 - In this soluton, W_DISABLE2 pin in M.2 is connected to
physical GPIO from PCH. The DSM interface shall toggle this to recover
from error.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sai Teja Aluvala [Wed, 14 Jun 2023 04:59:10 +0000 (10:29 +0530)]
Bluetooth: hci_qca: Add qcom devcoredump support
Intercept debug exception events from QCA controller and put them into
a devcoredump using hci devcoredump APIs of hci_core
Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
V2 -> V3:
---------
changed hci_coredump_qca function
V1 -> V2:
---------
Updated to work with the updated HCI devcoredump API.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sai Teja Aluvala [Wed, 14 Jun 2023 04:58:15 +0000 (10:28 +0530)]
Bluetooth: hci_qca: Add qcom devcoredump sysfs support
This patch implements the hci_qca driver side .coredump() callback to
trigger a devcoredump via sysfs.
Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
v2 -> V3:
--------
Updated commit text
v1 -> V2:
--------
Updated to work with the updated HCI devcoredump API.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Iulia Tanasescu [Mon, 19 Jun 2023 14:53:16 +0000 (17:53 +0300)]
Bluetooth: ISO: Support multiple BIGs
This adds support for creating multiple BIGs. According to
spec, each BIG shall have an unique handle, and each BIG should
be associated with a different advertising handle. Otherwise,
the LE Create BIG command will fail, with error code
Command Disallowed (for reusing a BIG handle), or
Unknown Advertising Identifier (for reusing an advertising
handle).
The btmon snippet below shows an exercise for creating two BIGs
for the same controller, by opening two isotest instances with
the following command:
tools/isotest -i hci0 -s 00:00:00:00:00:00
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31
Handle: 0x00
Advertising Handle: 0x01
Number of BIS: 1
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code:
00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 21
LE Broadcast Isochronous Group Complete (0x1b)
Status: Success (0x00)
Handle: 0x00
BIG Synchronization Delay: 912 us (0x000390)
Transport Latency: 912 us (0x000390)
PHY: LE 2M (0x02)
NSE: 3
BN: 1
PTO: 1
IRC: 3
Maximum PDU: 40
ISO Interval: 10.00 msec (0x0008)
Connection Handle #0: 10
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068)
Handle: 0x01
Advertising Handle: 0x02
Number of BIS: 1
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code:
00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 25 May 2023 23:46:43 +0000 (16:46 -0700)]
Bluetooth: hci_sock: Forward credentials to monitor
This stores scm_creds into hci_skb_cb so they can be properly forwarded
to the likes of btmon which is then able to print information about the
process who is originating the traffic:
bluetoothd[35]: @ MGMT Command: Rea.. (0x0001) plen 0 {0x0001}
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001}
Read Management Version Information (0x0001) plen 3
bluetoothd[35]: < ACL Data T.. flags 0x00 dlen 41
ATT: Write Command (0x52) len 36
Handle: 0x0043 Type: ASE Control Point (0x2bc6)
Data: 020203000110270000022800020a00409c0001000110270000022800020a00409c00
Opcode: QoS Configuration (0x02)
Number of ASE(s): 2
ASE: #0
ASE ID: 0x03
CIG ID: 0x00
CIS ID: 0x01
SDU Interval: 10000 usec
Framing: Unframed (0x00)
PHY: 0x02
LE 2M PHY (0x02)
Max SDU: 40
RTN: 2
Max Transport Latency: 10
Presentation Delay: 40000 us
ASE: #1
ASE ID: 0x01
CIG ID: 0x00
CIS ID: 0x01
SDU Interval: 10000 usec
Framing: Unframed (0x00)
PHY: 0x02
LE 2M PHY (0x02)
Max SDU: 40
RTN: 2
Max Transport Latency: 10
Presentation Delay: 40000 us
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 25 May 2023 23:46:42 +0000 (16:46 -0700)]
Bluetooth: Init sk_peer_* on bt_sock_alloc
This makes sure peer information is always available via sock when using
bt_sock_alloc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 25 May 2023 23:46:41 +0000 (16:46 -0700)]
Bluetooth: Consolidate code around sk_alloc into a helper function
This consolidates code around sk_alloc into bt_sock_alloc which does
take care of common initialization.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Max Chou [Tue, 30 May 2023 08:34:20 +0000 (16:34 +0800)]
Bluetooth: btrtl: Correct the length of the HCI command for drop fw
The original code did not determine the length value of the HCI command
for drop fw even there's no parameter needed. In this commit, use struct
hci_command_hdr to manage opcode and length. It would be more regular and
more readable.
Suggested-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Thu, 1 Jun 2023 06:34:46 +0000 (09:34 +0300)]
Bluetooth: ISO: do not emit new LE Create CIS if previous is pending
LE Create CIS command shall not be sent before all CIS Established
events from its previous invocation have been processed. Currently it is
sent via hci_sync but that only waits for the first event, but there can
be multiple.
Make it wait for all events, and simplify the CIS creation as follows:
Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been
sent for the connection but it is not yet completed.
Make BT_CONNECT state to mean the connection wants Create CIS.
On events after which new Create CIS may need to be sent, send it if
possible and some connections need it. These events are:
hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis,
hci_le_cis_estabilished_evt.
The Create CIS status/completion events shall queue new Create CIS only
if at least one of the connections transitions away from BT_CONNECT, so
that we don't loop if controller is sending bogus events.
This fixes sending multiple CIS Create for the same CIS in the
"ISO AC 6(i) - Success" BlueZ test case:
< HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0]
Number of CIS: 2
CIS Handle: 257
ACL Handle: 42
CIS Handle: 258
ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4 #130 [hci0]
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0]
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 257
...
< HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0]
...
> HCI Event: Command Complete (0x0e) plen 6 #133 [hci0]
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
...
< HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0]
Number of CIS: 1
CIS Handle: 258
ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4 #135 [hci0]
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: ACL Connection Already Exists (0x0b)
> HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0]
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 258
...
Fixes:
c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Iulia Tanasescu [Tue, 30 May 2023 14:21:59 +0000 (17:21 +0300)]
Bluetooth: ISO: Add support for connecting multiple BISes
It is required for some configurations to have multiple BISes as part
of the same BIG.
Similar to the flow implemented for unicast, DEFER_SETUP will also be
used to bind multiple BISes for the same BIG, before starting Periodic
Advertising and creating the BIG.
The user will have to open a new socket for each BIS. By setting the
BT_DEFER_SETUP socket option and calling connect, a new connection
will be added for the BIG and advertising handle set by the socket
QoS parameters. Since all BISes will be bound for the same BIG and
advertising handle, the socket QoS options and base parameters should
match for all connections.
By calling connect on a socket that does not have the BT_DEFER_SETUP
option set, periodic advertising will be started and the BIG will
be created, with a BIS for each previously bound connection. Since
a BIG cannot be reconfigured with additional BISes after creation,
no more connections can be bound for the BIG after the start periodic
advertising and create BIG commands have been queued.
The bis_cleanup function has also been updated, so that the advertising
set and the BIG will not be terminated unless there are no more
bound or connected BISes.
The HCI_CONN_BIG_CREATED connection flag has been added to indicate
that the BIG has been successfully created. This flag is checked at
bis_cleanup, so that the BIG is only terminated if the
HCI_LE_Create_BIG_Complete has been received.
This implementation has been tested on hardware, using the "isotest"
tool with an additional command line option, to specify the number of
BISes to create as part of the desired BIG:
tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1
The btmon log shows that a BIG containing 2 BISes has been created:
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31
Handle: 0x01
Advertising Handle: 0x01
Number of BIS: 2
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code:
00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 23
LE Broadcast Isochronous Group Complete (0x1b)
Status: Success (0x00)
Handle: 0x01
BIG Synchronization Delay: 1974 us (0x0007b6)
Transport Latency: 1974 us (0x0007b6)
PHY: LE 2M (0x02)
NSE: 3
BN: 1
PTO: 1
IRC: 3
Maximum PDU: 40
ISO Interval: 10.00 msec (0x0008)
Connection Handle #0: 10
Connection Handle #1: 11
< HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13
Handle: 10
Data Path Direction: Input (Host to Controller) (0x00)
Data Path: HCI (0x00)
Coding Format: Transparent (0x03)
Company Codec ID: Ericsson Technology Licensing (0)
Vendor Codec ID: 0
Controller Delay: 0 us (0x000000)
Codec Configuration Length: 0
Codec Configuration:
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 10
< HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13
Handle: 11
Data Path Direction: Input (Host to Controller) (0x00)
Data Path: HCI (0x00)
Coding Format: Transparent (0x03)
Company Codec ID: Ericsson Technology Licensing (0)
Vendor Codec ID: 0
Controller Delay: 0 us (0x000000)
Codec Configuration Length: 0
Codec Configuration:
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 11
< ISO Data TX: Handle 10 flags 0x02 dlen 44
< ISO Data TX: Handle 11 flags 0x02 dlen 44
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 10
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 11
Count: 1
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hilda Wu [Thu, 27 Apr 2023 03:27:55 +0000 (11:27 +0800)]
Bluetooth: btrtl: Add Realtek devcoredump support
Catch debug exception from controller and driver, and trigger a
devcoredump using hci devcoredump APIs. The debug exception data
will be parsed in userspace.
Signed-off-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Claudia Draghicescu [Wed, 10 May 2023 13:45:57 +0000 (16:45 +0300)]
Bluetooth: Check for ISO support in controller
This patch checks for ISO_BROADCASTER and ISO_SYNC_RECEIVER in
controller.
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
David S. Miller [Fri, 11 Aug 2023 10:58:36 +0000 (11:58 +0100)]
Merge branch 'rzn1-a5psw-vlan-port_bridge_flags'
Alexis Lothoré says:
====================
net: dsa: rzn1-a5psw: add support for vlan and .port_bridge_flags
this series enables vlan support in Renesas RZN1 internal ethernet switch,
and is a follow up to the work initiated by Clement Leger a few months ago,
who handed me over the topic.
This new revision aims to iron the last few points raised by Vladimir to
ensure that the driver is in line with switch drivers expectations, and is
based on the lengthy discussion in [1] (thanks Vladimir for the valuable
explanations)
[1] https://lore.kernel.org/netdev/
20230314163651.242259-1-clement.leger@bootlin.com/
----
V5:
- ensure that flooding can be enabled only if port belongs to a bridge
- enable learning in a5psw_port_stp_state_set() only if port has learning
enabled
- toggle vlan tagging on vlan filtering in
- removed reviewed-by on second patch since its modified
RESEND V4:
- Resent due to net-next being closed
V4:
- Fix missing CPU port bit in a5psw->bridged_ports
- Use unsigned int for vlan_res_id parameters
- Rename a5psw_get_vlan_res_entry() to a5psw_new_vlan_res_entry()
- In a5psw_port_vlan_add(), return -ENOSPC when no VLAN entry is found
- In a5psw_port_vlan_filtering(), compute "val" from "mask"
V3:
- Target net-next tree and correct version...
V2:
- Fixed a few formatting errors
- Add .port_bridge_flags implementation
====================
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clément Léger [Thu, 10 Aug 2023 09:36:51 +0000 (11:36 +0200)]
net: dsa: rzn1-a5psw: add vlan support
Add support for vlan operation (add, del, filtering) on the RZN1
driver. The a5psw switch supports up to 32 VLAN IDs with filtering,
tagged/untagged VLANs and PVID for each ports.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clément Léger [Thu, 10 Aug 2023 09:36:50 +0000 (11:36 +0200)]
net: dsa: rzn1-a5psw: add support for .port_bridge_flags
When running vlan test (bridge_vlan_aware/unaware.sh), there were some
failure due to the lack .port_bridge_flag function to disable port
flooding. Implement this operation for BR_LEARNING, BR_FLOOD,
BR_MCAST_FLOOD and BR_BCAST_FLOOD.
Since .port_bridge_flags affects the bits disabling learning for a port,
ensure that any other modification on the same register done by
a5psw_port_stp_state_set is in sync by using the port learning state to
enable/disable learning on the port.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clément Léger [Thu, 10 Aug 2023 09:36:49 +0000 (11:36 +0200)]
net: dsa: rzn1-a5psw: use a5psw_reg_rmw() to modify flooding resolution
.port_bridge_flags will be added and allows to modify the flood mask
independently for each port. Keeping the existing bridged_ports write
in a5psw_flooding_set_resolution() would potentially messed up this.
Use a read-modify-write to set that value and move bridged_ports
handling in bridge_port_join/leave.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Thu, 10 Aug 2023 17:11:19 +0000 (22:41 +0530)]
octeontx2-pf: Allow both ntuple and TC features on the interface
The current implementation does not allow the user to enable both
hw-tc-offload and ntuple features on the interface. These checks
are added as TC flower offload and ntuple features internally configures
the same hardware resource MCAM. But TC HTB offload configures the
transmit scheduler which can be safely enabled on the interface with
ntuple feature.
This patch adds the same and ensures only TC flower offload and ntuple
features are mutually exclusive.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 11 Aug 2023 10:10:55 +0000 (11:10 +0100)]
Merge branch 'bond-cleanups'
Zhengchao Shao says:
====================
bonding: do some cleanups in bond driver
Do some cleanups in bond driver.
---
v2: use IS_ERR instead of NULL check in patch 2/5, update commit
information in patch 3/5, remove inline modifier in patch 4/5
====================
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Thu, 10 Aug 2023 13:50:07 +0000 (21:50 +0800)]
bonding: remove unnecessary NULL check in bond_destructor
The free_percpu function also could check whether "rr_tx_counter"
parameter is NULL. Therefore, remove NULL check in bond_destructor.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Thu, 10 Aug 2023 13:50:06 +0000 (21:50 +0800)]
bonding: use bond_set_slave_arr to simplify code
In bond_reset_slave_arr(), values are assigned and memory is released only
when the variables "usable" and "all" are not NULL. But even if the
"usable" and "all" variables are NULL, they can still work, because value
will be checked in kfree_rcu. Therefore, use bond_set_slave_arr() and set
the input parameters "usable_slaves" and "all_slaves" to NULL to simplify
the code in bond_reset_slave_arr(). And the same to bond_uninit().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Thu, 10 Aug 2023 13:50:05 +0000 (21:50 +0800)]
bonding: remove redundant NULL check in debugfs function
Because debugfs_create_dir returns ERR_PTR, so bonding_debug_root will
never be NULL. Remove redundant NULL check for bonding_debug_root in
debugfs function. The later debugfs_create_dir/debugfs_remove_recursive
/debugfs_remove_recursive functions will check the dentry with IS_ERR().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Thu, 10 Aug 2023 13:50:04 +0000 (21:50 +0800)]
bonding: use IS_ERR instead of NULL check in bond_create_debugfs
Because debugfs_create_dir returns ERR_PTR, so IS_ERR should be used to
check whether the directory is successfully created.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Thu, 10 Aug 2023 13:50:03 +0000 (21:50 +0800)]
bonding: add modifier to initialization function and exit function
Some functions are only used in initialization and exit functions, so add
the __init/__net_init and __net_exit modifiers to these functions.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof Kozlowski [Thu, 10 Aug 2023 10:39:23 +0000 (12:39 +0200)]
net/marvell: fix Wvoid-pointer-to-enum-cast warning
'type' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:
mvmdio.c:272:9: error: cast to smaller integer type 'enum orion_mdio_bus_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof Kozlowski [Thu, 10 Aug 2023 10:39:22 +0000 (12:39 +0200)]
net/xgene: fix Wvoid-pointer-to-enum-cast warning
'enet_id' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:
xgene_enet_main.c:2044:20: error: cast to smaller integer type 'enum xgene_enet_id' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Shradha Gupta [Thu, 10 Aug 2023 04:15:22 +0000 (21:15 -0700)]
net: mana: Add gdma stats to ethtool output for mana
Extended performance counter stats in 'ethtool -S <interface>'
for MANA VF to include GDMA tx LSO packets and bytes count.
Tested-on: Ubuntu22
Testcases:
1. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic
2. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV
3. Validated the GDMA stat packets and byte counters
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sathesh Edara [Wed, 9 Aug 2023 11:29:33 +0000 (04:29 -0700)]
octeon_ep: Add control plane host and firmware versions.
Implement control plane mailbox versions for host and firmware.
Versions are published in info area of control mailbox bar4
memory structure.Firmware will publish minimum and maximum
supported versions.Control plane mailbox apis will check for
firmware version before sending any control commands to firmware.
Notifications from firmware will similarly be checked for host
version compatibility.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ratheesh Kannoth [Wed, 9 Aug 2023 06:40:39 +0000 (12:10 +0530)]
octeontx2-af: Harden rule validation.
Accept TC offload classifier rule only if SPI field
can be extracted by HW.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Antonov [Tue, 8 Aug 2023 12:43:07 +0000 (15:43 +0300)]
net: ftmac100: add multicast filtering possibility
If netdev_mc_count() is not zero and not IFF_ALLMULTI, filter
incoming multicast packets. The chip has a Multicast Address Hash Table
for allowed multicast addresses, so we fill it.
Implement .ndo_set_rx_mode and recalculate multicast hash table. Also
observe change of IFF_PROMISC and IFF_ALLMULTI netdev flags.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tahsin Erdogan [Wed, 9 Aug 2023 16:47:52 +0000 (09:47 -0700)]
tun: avoid high-order page allocation for packet header
When gso.hdr_len is zero and a packet is transmitted via write() or
writev(), all payload is treated as header which requires a contiguous
memory allocation. This allocation request is harder to satisfy, and may
even fail if there is enough fragmentation.
Note that sendmsg() code path limits the linear copy length, so this change
makes write()/writev() and sendmsg() paths more consistent.
Signed-off-by: Tahsin Erdogan <trdgn@amazon.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230809164753.2247594-1-trdgn@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yang Yingliang [Thu, 10 Aug 2023 01:46:33 +0000 (09:46 +0800)]
net: ethernet: 8390: ne2k-pci: use module_pci_driver() macro
The driver init/exit() function don't do anything special, it
can use the module_pci_driver() macro to eliminate boilerplate
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230810014633.3084355-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yue Haibing [Wed, 9 Aug 2023 14:23:23 +0000 (22:23 +0800)]
sctp: Remove unused declaration sctp_backlog_migrate()
Commit
61c9fed41638 ("[SCTP]: A better solution to fix the race between sctp_peeloff()
and sctp_rcv().") removed the implementation but left declaration in place. Remove it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230809142323.9428-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 11 Aug 2023 01:59:43 +0000 (18:59 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Merge net again, after pulling in x86/bugs fixes to clang
linking errors.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yue Haibing [Wed, 9 Aug 2023 13:49:43 +0000 (21:49 +0800)]
net: caif: Remove unused declaration cfsrvl_ctrlcmd()
Commit
43e369210108 ("caif: Move refcount from service layer to sock and dev.")
declared but never implemented this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809134943.37844-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 11 Aug 2023 01:18:24 +0000 (18:18 -0700)]
Merge branch 'x86/bugs' of git://git./linux/kernel/git/tip/tip
Cross merge x86 fixes to fix clang linking errors:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:221: at least one side of the expression must be absolute
These will hopefully be downstream by the time we ship
the next batch of fixes.
* 'x86/bugs' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Move gds_ucode_mitigated() declaration to header
x86/speculation: Add cpu_show_gds() prototype
driver core: cpu: Make cpu_show_not_affected() static
x86/srso: Fix build breakage with the LLVM linker
Documentation/srso: Document IBPB aspect and fix formatting
driver core: cpu: Unify redundant silly stubs
Documentation/hw-vuln: Unify filename specification in index
Link: https://lore.kernel.org/all/CAHk-=wj_b+FGTnevQSBAtCWuhCk=0oQ_THvthBW2hzqpOTLFmg@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Furong Xu [Wed, 9 Aug 2023 02:02:38 +0000 (10:02 +0800)]
net: stmmac: xgmac: RX queue routing configuration
Commit
abe80fdc6ee6 ("net: stmmac: RX queue routing configuration")
introduced RX queue routing to DWMAC4 core.
This patch extend the support to XGMAC2 core.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809020238.1136732-1-0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 11 Aug 2023 00:35:02 +0000 (17:35 -0700)]
Merge branch 'support-offload-led-blinking-to-phy'
Andrew Lunn says:
====================
Support offload LED blinking to PHY.
Allow offloading of the LED trigger netdev to PHY drivers and
implement it for the Marvell PHY driver. Additionally, correct the
handling of when the initial state of the LED cannot be represented by
the trigger, and so an error is returned. As with ledtrig-timer,
disable offload when the trigger is deactivate, or replaced by another
trigger.
====================
Link: https://lore.kernel.org/r/20230808210436.838995-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Tue, 8 Aug 2023 21:04:36 +0000 (23:04 +0200)]
leds: trig-netdev: Disable offload on deactivation of trigger
Ensure that the offloading of blinking is stopped when the trigger is
deactivated. Calling led_set_brightness() is documented as stopping
offload and setting the LED to a constant brightness.
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-5-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Tue, 8 Aug 2023 21:04:35 +0000 (23:04 +0200)]
net: phy: marvell: Add support for offloading LED blinking
Add the code needed to indicate if a given blinking pattern can be
offloaded, to offload a pattern and to try to return the current
pattern.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-4-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Tue, 8 Aug 2023 21:04:34 +0000 (23:04 +0200)]
net: phy: phy_device: Call into the PHY driver to set LED offload
Linux LEDs can be requested to perform hardware accelerated blinking
to indicate link, RX, TX etc. Pass the rules for blinking to the PHY
driver, if it implements the ops needed to determine if a given
pattern can be offloaded, to offload it, and what the current offload
is. Additionally implement the op needed to get what device the LED is
for.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-3-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Tue, 8 Aug 2023 21:04:33 +0000 (23:04 +0200)]
led: trig: netdev: Fix requesting offload device
When the netdev trigger is activates, it tries to determine what
device the LED blinks for, and what the current blink mode is.
The documentation for hw_control_get() says:
* Return 0 on success, a negative error number on failing parsing the
* initial mode. Error from this function is NOT FATAL as the device
* may be in a not supported initial state by the attached LED trigger.
*/
For the Marvell PHY and the Armada 370-rd board, the initial LED blink
mode is not supported by the trigger, so it returns an error. This
resulted in not getting the device the LED is blinking for. As a
result, the device is unknown and offloaded is never performed.
Change to condition to always get the device if offloading is
supported, and reduce the scope of testing for an error from
hw_control_get() to skip setting trigger internal state if there is an
error.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-2-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Li Zetao [Tue, 8 Aug 2023 02:12:38 +0000 (10:12 +0800)]
net: mhi: Remove redundant initialization owner in mhi_net_driver
The module_mhi_driver() will set "THIS_MODULE" to driver.owner when
register a mhi_driver driver, so it is redundant initialization to set
driver.owner in the statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808021238.2975585-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 11 Aug 2023 00:26:07 +0000 (17:26 -0700)]
Merge branch 'update-stmmac-fix_mac_speed'
Shenwei Wang says:
====================
update stmmac fix_mac_speed
====================
Link: https://lore.kernel.org/r/20230807160716.259072-1-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shenwei Wang [Mon, 7 Aug 2023 16:07:16 +0000 (11:07 -0500)]
net: stmmac: dwmac-imx: pause the TXC clock in fixed-link
When using a fixed-link setup, certain devices like the SJA1105 require a
small pause in the TXC clock line to enable their internal tunable
delay line (TDL).
To satisfy this requirement, this patch temporarily disables the TX clock,
and restarts it after a required period. This provides the required
silent interval on the clock line for SJA1105 to complete the frequency
transition and enable the internal TDLs. This action occurs before the link
is built up, so it does not impact a normal device too. There is no
need to identify if the connected device is an SJA1105 alike or not during
the implementation.
So far we have only enabled this feature on the i.MX93 platform.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Link: https://lore.kernel.org/r/20230807160716.259072-3-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shenwei Wang [Mon, 7 Aug 2023 16:07:15 +0000 (11:07 -0500)]
net: stmmac: add new mode parameter for fix_mac_speed
A mode parameter has been added to the callback function of fix_mac_speed
to indicate the physical layer type.
The mode can be one the following:
MLO_AN_PHY - Conventional PHY
MLO_AN_FIXED - Fixed-link mode
MLO_AN_INBAND - In-band protocol
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230807160716.259072-2-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 10 Aug 2023 21:12:34 +0000 (14:12 -0700)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-09
We've added 19 non-merge commits during the last 6 day(s) which contain
a total of 25 files changed, 369 insertions(+), 141 deletions(-).
The main changes are:
1) Fix array-index-out-of-bounds access when detaching from an
already empty mprog entry from Daniel Borkmann.
2) Adjust bpf selftest because of a recent llvm change
related to the cpu-v4 ISA from Eduard Zingerman.
3) Add uprobe support for the bpf_get_func_ip helper from Jiri Olsa.
4) Fix a KASAN splat due to the kernel incorrectly accepted
an invalid program using the recent cpu-v4 instruction from
Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: btf: Remove two unused function declarations
bpf: lru: Remove unused declaration bpf_lru_promote()
selftests/bpf: relax expected log messages to allow emitting BPF_ST
selftests/bpf: remove duplicated functions
bpf, docs: Fix small typo and define semantics of sign extension
selftests/bpf: Add bpf_get_func_ip test for uprobe inside function
selftests/bpf: Add bpf_get_func_ip tests for uprobe on function entry
bpf: Add support for bpf_get_func_ip helper for uprobe program
selftests/bpf: Add a movsx selftest for sign-extension of R10
bpf: Fix an incorrect verification success with movsx insn
bpf, docs: Formalize type notation and function semantics in ISA standard
bpf: change bpf_alu_sign_string and bpf_movsx_string to static
libbpf: Use local includes inside the library
bpf: fix bpf_dynptr_slice() to stop return an ERR_PTR.
bpf: fix inconsistent return types of bpf_xdp_copy_buf().
selftests/bpf: fix the incorrect verification of port numbers.
selftests/bpf: Add test for detachment on empty mprog entry
bpf: Fix mprog detachment for empty mprog entry
bpf: bpf_struct_ops: Remove unnecessary initial values of variables
====================
Link: https://lore.kernel.org/r/20230810055123.109578-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 10 Aug 2023 21:04:58 +0000 (14:04 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/igc/igc_main.c
06b412589eef ("igc: Add lock to safeguard global Qbv variables")
d3750076d464 ("igc: Add TransmissionOverrun counter")
drivers/net/ethernet/microsoft/mana/mana_en.c
a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive")
a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h")
92272ec4107e ("eth: add missing xdp.h includes in drivers")
net/mptcp/protocol.h
511b90e39250 ("mptcp: fix disconnect vs accept race")
b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning")
tools/testing/selftests/net/mptcp/mptcp_join.sh
c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test")
03668c65d153 ("selftests: mptcp: join: rework detailed report")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 10 Aug 2023 19:37:24 +0000 (12:37 -0700)]
Merge tag 'net-6.5-rc6' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bpf.
Still trending up in size but the good news is that the "current"
regressions are resolved, AFAIK.
We're getting weirdly many fixes for Wake-on-LAN and suspend/resume
handling on embedded this week (most not merged yet), not sure why.
But those are all for older bugs.
Current release - regressions:
- tls: set MSG_SPLICE_PAGES consistently when handing encrypted data
over to TCP
Current release - new code bugs:
- eth: mlx5: correct IDs on VFs internal to the device (IPU)
Previous releases - regressions:
- phy: at803x: fix WoL support / reporting on AR8032
- bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from
slaves, leading to BUG_ON()
- tun: prevent tun_build_skb() from exceeding the packet size limit
- wifi: rtw89: fix 8852AE disconnection caused by RX full flags
- eth/PCI: enetc: fix probing after
6fffbc7ae137 ("PCI: Honor
firmware's device disabled status"), keep PCI devices around even
if they are disabled / not going to be probed to be able to apply
quirks on them
- eth: prestera: fix handling IPv4 routes with nexthop IDs
Previous releases - always broken:
- netfilter: re-work garbage collection to avoid races between
user-facing API and timeouts
- tunnels: fix generating ipv4 PMTU error on non-linear skbs
- nexthop: fix infinite nexthop bucket dump when using maximum
nexthop ID
- wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
Misc:
- unix: use consistent error code in SO_PEERPIDFD
- ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for
upcoming IETF RFC"
* tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
net: hns3: fix strscpy causing content truncation issue
net: tls: set MSG_SPLICE_PAGES consistently
ibmvnic: Ensure login failure recovery is safe from other resets
ibmvnic: Do partial reset on login failure
ibmvnic: Handle DMA unmapping of login buffs in release functions
ibmvnic: Unmap DMA login rsp buffer on send login fail
ibmvnic: Enforce stronger sanity checks on login response
net: mana: Fix MANA VF unload when hardware is unresponsive
netfilter: nf_tables: remove busy mark and gc batch API
netfilter: nft_set_hash: mark set element as dead when deleting from packet path
netfilter: nf_tables: adapt set backend to use GC transaction API
netfilter: nf_tables: GC transaction API to avoid race with control plane
selftests/bpf: Add sockmap test for redirecting partial skb data
selftests/bpf: fix a CI failure caused by vsock sockmap test
bpf, sockmap: Fix bug that strp_done cannot be called
bpf, sockmap: Fix map type error in sock_map_del_link
xsk: fix refcount underflow in error path
ipv6: adjust ndisc_is_useropt() to also return true for PIO
selftests: forwarding: bridge_mdb: Make test more robust
selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet
...
Hao Chen [Wed, 9 Aug 2023 02:09:02 +0000 (10:09 +0800)]
net: hns3: fix strscpy causing content truncation issue
hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some
items to a string for content, and we add '\n' and '\0' in the last
two bytes of content.
strscpy() will add '\0' in the last byte of destination buffer(one of
items), it result in finishing content print ahead of schedule and some
dump content truncation.
One Error log shows as below:
cat mac_list/uc
UC MAC_LIST:
Expected:
UC MAC_LIST:
FUNC_ID MAC_ADDR STATE
pf 00:2b:19:05:03:00 ACTIVE
The destination buffer is length-bounded and not required to be
NUL-terminated, so just change strscpy() to memcpy() to fix it.
Fixes:
1cf3d5567f27 ("net: hns3: fix strncpy() not using dest-buf length as length issue")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20230809020902.1941471-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 8 Aug 2023 18:09:17 +0000 (11:09 -0700)]
net: tls: set MSG_SPLICE_PAGES consistently
We used to change the flags for the last segment, because
non-last segments had the MSG_SENDPAGE_NOTLAST flag set.
That flag is no longer a thing so remove the setting.
Since flags most likely don't have MSG_SPLICE_PAGES set
this avoids passing parts of the sg as splice and parts
as non-splice. Before commit under Fixes we'd have called
tcp_sendpage() which would add the MSG_SPLICE_PAGES.
Why this leads to trouble remains unclear but Tariq
reports hitting the WARN_ON(!sendpage_ok()) due to
page refcount of 0.
Fixes:
e117dcfd646e ("tls: Inline do_tcp_sendpages()")
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/all/4c49176f-147a-4283-f1b1-32aac7b4b996@gmail.com/
Tested-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230808180917.1243540-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 10 Aug 2023 18:32:26 +0000 (11:32 -0700)]
Merge tag 'dmaengine-fix-6.5' of git://git./linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- HAS_IOMEM fixes for fsl edma and intel idma
- return-value fix, interrupt vector setting and typo fix for xilinx
xdma
- email updates for codeaurora email domain move
- correct pause status for pl330 driver
- idxd clear flag on disable fix
- function documentation fix for owl dma
- potential un-allocated memory fix for mcf driver
* tag 'dmaengine-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: xilinx: xdma: Fix typo
dmaengine: xilinx: xdma: Fix interrupt vector setting
dmaengine: owl-dma: Modify mismatched function name
dmaengine: idxd: Clear PRS disable flag when disabling IDXD device
dmaengine: pl330: Return DMA_PAUSED when transaction is paused
dmaengine: qcom_hidma: Update codeaurora email domain
dmaengine: mcf-edma: Fix a potential un-allocated memory access
dmaengine: xilinx: xdma: Fix Judgment of the return value
idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM
Jakub Kicinski [Thu, 10 Aug 2023 17:47:07 +0000 (10:47 -0700)]
Merge tag 'nf-23-08-10' of git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The existing attempt to resolve races between control plane and GC work
is error prone, as reported by Bien Pham <phamnnb@sea.com>, some places
forgot to call nft_set_elem_mark_busy(), leading to double-deactivation
of elements.
This series contains the following patches:
1) Do not skip expired elements during walk otherwise elements might
never decrement the reference counter on data, leading to memleak.
2) Add a GC transaction API to replace the former attempt to deal with
races between control plane and GC. GC worker sets on NFT_SET_ELEM_DEAD_BIT
on elements and it creates a GC transaction to remove the expired
elements, GC transaction could abort in case of interference with
control plane and retried later (GC async). Set backends such as
rbtree and pipapo also perform GC from control plane (GC sync), in
such case, element deactivation and removal is safe because mutex
is held then collected elements are released via call_rcu().
3) Adapt existing set backends to use the GC transaction API.
4) Update rhash set backend to set on _DEAD bit to report deleted
elements from datapath for GC.
5) Remove old GC batch API and the NFT_SET_ELEM_BUSY_BIT.
* tag 'nf-23-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: remove busy mark and gc batch API
netfilter: nft_set_hash: mark set element as dead when deleting from packet path
netfilter: nf_tables: adapt set backend to use GC transaction API
netfilter: nf_tables: GC transaction API to avoid race with control plane
netfilter: nf_tables: don't skip expired elements during walk
====================
Link: https://lore.kernel.org/r/20230810070830.24064-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 10 Aug 2023 17:41:36 +0000 (10:41 -0700)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf
Martin KaFai Lau says:
====================
pull-request: bpf 2023-08-09
We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 6 files changed, 102 insertions(+), 8 deletions(-).
The main changes are:
1) A bpf sockmap memleak fix and a fix in accessing the programs of
a sockmap under the incorrect map type from Xu Kuohai.
2) A refcount underflow fix in xsk from Magnus Karlsson.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add sockmap test for redirecting partial skb data
selftests/bpf: fix a CI failure caused by vsock sockmap test
bpf, sockmap: Fix bug that strp_done cannot be called
bpf, sockmap: Fix map type error in sock_map_del_link
xsk: fix refcount underflow in error path
====================
Link: https://lore.kernel.org/r/20230810055303.120917-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nick Child [Wed, 9 Aug 2023 22:10:38 +0000 (17:10 -0500)]
ibmvnic: Ensure login failure recovery is safe from other resets
If a login request fails, the recovery process should be protected
against parallel resets. It is a known issue that freeing and
registering CRQ's in quick succession can result in a failover CRQ from
the VIOS. Processing a failover during login recovery is dangerous for
two reasons:
1. This will result in two parallel initialization processes, this can
cause serious issues during login.
2. It is possible that the failover CRQ is received but never executed.
We get notified of a pending failover through a transport event CRQ.
The reset is not performed until a INIT CRQ request is received.
Previously, if CRQ init fails during login recovery, then the ibmvnic
irq is freed and the login process returned error. If failover_pending
is true (a transport event was received), then the ibmvnic device
would never be able to process the reset since it cannot receive the
CRQ_INIT request due to the irq being freed. This leaved the device
in a inoperable state.
Therefore, the login failure recovery process must be hardened against
these possible issues. Possible failovers (due to quick CRQ free and
init) must be avoided and any issues during re-initialization should be
dealt with instead of being propagated up the stack. This logic is
similar to that of ibmvnic_probe().
Fixes:
dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-5-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nick Child [Wed, 9 Aug 2023 22:10:37 +0000 (17:10 -0500)]
ibmvnic: Do partial reset on login failure
Perform a partial reset before sending a login request if any of the
following are true:
1. If a previous request times out. This can be dangerous because the
VIOS could still receive the old login request at any point after
the timeout. Therefore, it is best to re-register the CRQ's and
sub-CRQ's before retrying.
2. If the previous request returns an error that is not described in
PAPR. PAPR provides procedures if the login returns with partial
success or aborted return codes (section L.5.1) but other values
do not have a defined procedure. Previously, these conditions
just returned error from the login function rather than trying
to resolve the issue.
This can cause further issues since most callers of the login
function are not prepared to handle an error when logging in. This
improper cleanup can lead to the device being permanently DOWN'd.
For example, if the VIOS believes that the device is already logged
in then it will return INVALID_STATE (-7). If we never re-register
CRQ's then it will always think that the device is already logged
in. This leaves the device inoperable.
The partial reset involves freeing the sub-CRQs, freeing the CRQ then
registering and initializing a new CRQ and sub-CRQs. This essentially
restarts all communication with VIOS to allow for a fresh login attempt
that will be unhindered by any previous failed attempts.
Fixes:
dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-4-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nick Child [Wed, 9 Aug 2023 22:10:36 +0000 (17:10 -0500)]
ibmvnic: Handle DMA unmapping of login buffs in release functions
Rather than leaving the DMA unmapping of the login buffers to the
login response handler, move this work into the login release functions.
Previously, these functions were only used for freeing the allocated
buffers. This could lead to issues if there are more than one
outstanding login buffer requests, which is possible if a login request
times out.
If a login request times out, then there is another call to send login.
The send login function makes a call to the login buffer release
function. In the past, this freed the buffers but did not DMA unmap.
Therefore, the VIOS could still write to the old login (now freed)
buffer. It is for this reason that it is a good idea to leave the DMA
unmap call to the login buffers release function.
Since the login buffer release functions now handle DMA unmapping,
remove the duplicate DMA unmapping in handle_login_rsp().
Fixes:
dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-3-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nick Child [Wed, 9 Aug 2023 22:10:35 +0000 (17:10 -0500)]
ibmvnic: Unmap DMA login rsp buffer on send login fail
If the LOGIN CRQ fails to send then we must DMA unmap the response
buffer. Previously, if the CRQ failed then the memory was freed without
DMA unmapping.
Fixes:
c98d9cc4170d ("ibmvnic: send_login should check for crq errors")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nick Child [Wed, 9 Aug 2023 22:10:34 +0000 (17:10 -0500)]
ibmvnic: Enforce stronger sanity checks on login response
Ensure that all offsets in a login response buffer are within the size
of the allocated response buffer. Any offsets or lengths that surpass
the allocation are likely the result of an incomplete response buffer.
In these cases, a full reset is necessary.
When attempting to login, the ibmvnic device will allocate a response
buffer and pass a reference to the VIOS. The VIOS will then send the
ibmvnic device a LOGIN_RSP CRQ to signal that the buffer has been filled
with data. If the ibmvnic device does not get a response in 20 seconds,
the old buffer is freed and a new login request is sent. With 2
outstanding requests, any LOGIN_RSP CRQ's could be for the older
login request. If this is the case then the login response buffer (which
is for the newer login request) could be incomplete and contain invalid
data. Therefore, we must enforce strict sanity checks on the response
buffer values.
Testing has shown that the `off_rxadd_buff_size` value is filled in last
by the VIOS and will be the smoking gun for these circumstances.
Until VIOS can implement a mechanism for tracking outstanding response
buffers and a method for mapping a LOGIN_RSP CRQ to a particular login
response buffer, the best ibmvnic can do in this situation is perform a
full reset.
Fixes:
dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Souradeep Chakrabarti [Wed, 9 Aug 2023 10:22:05 +0000 (03:22 -0700)]
net: mana: Fix MANA VF unload when hardware is unresponsive
When unloading the MANA driver, mana_dealloc_queues() waits for the MANA
hardware to complete any inflight packets and set the pending send count
to zero. But if the hardware has failed, mana_dealloc_queues()
could wait forever.
Fix this by adding a timeout to the wait. Set the timeout to 120 seconds,
which is a somewhat arbitrary value that is more than long enough for
functional hardware to complete any sends.
Cc: stable@vger.kernel.org
Fixes:
ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Wed, 9 Aug 2023 13:05:00 +0000 (15:05 +0200)]
x86: Move gds_ucode_mitigated() declaration to header
The declaration got placed in the .c file of the caller, but that
causes a warning for the definition:
arch/x86/kernel/cpu/bugs.c:682:6: error: no previous prototype for 'gds_ucode_mitigated' [-Werror=missing-prototypes]
Move it to a header where both sides can observe it instead.
Fixes:
81ac7e5d74174 ("KVM: Add GDS_NO support to KVM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/20230809130530.1913368-2-arnd%40kernel.org
Arnd Bergmann [Wed, 9 Aug 2023 13:04:59 +0000 (15:04 +0200)]
x86/speculation: Add cpu_show_gds() prototype
The newly added function has two definitions but no prototypes:
drivers/base/cpu.c:605:16: error: no previous prototype for 'cpu_show_gds' [-Werror=missing-prototypes]
Add a declaration next to the other ones for this file to avoid the
warning.
Fixes:
8974eb588283b ("x86/speculation: Add Gather Data Sampling mitigation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/20230809130530.1913368-1-arnd%40kernel.org
Borislav Petkov (AMD) [Thu, 10 Aug 2023 11:22:29 +0000 (13:22 +0200)]
driver core: cpu: Make cpu_show_not_affected() static
Fix a -Wmissing-prototypes warning and add the gather_data_sampling()
stub macro call for real.
Fixes:
0fddfe338210 ("driver core: cpu: Unify redundant silly stubs")
Closes: https://lore.kernel.org/oe-kbuild-all/
202308101956.oRj1ls7s-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/202308101956.oRj1ls7s-lkp@intel.com
Nick Desaulniers [Wed, 9 Aug 2023 16:40:26 +0000 (09:40 -0700)]
x86/srso: Fix build breakage with the LLVM linker
The assertion added to verify the difference in bits set of the
addresses of srso_untrain_ret_alias() and srso_safe_ret_alias() would fail
to link in LLVM's ld.lld linker with the following error:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:210: at least one side of
the expression must be absolute
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:211: at least one side of
the expression must be absolute
Use ABSOLUTE to evaluate the expression referring to at least one of the
symbols so that LLD can evaluate the linker script.
Also, add linker version info to the comment about XOR being unsupported
in either ld.bfd or ld.lld until somewhat recently.
Fixes:
fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Closes: https://lore.kernel.org/llvm/CA+G9fYsdUeNu-gwbs0+T6XHi4hYYk=Y9725-wFhZ7gJMspLDRA@mail.gmail.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Daniel Kolesa <daniel@octaforge.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Sven Volkinsfeld <thyrc@gmx.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://github.com/ClangBuiltLinux/linux/issues/1907
Link: https://lore.kernel.org/r/20230809-gds-v1-1-eaac90b0cbcc@google.com
Borislav Petkov (AMD) [Wed, 2 Aug 2023 18:07:32 +0000 (20:07 +0200)]
Documentation/srso: Document IBPB aspect and fix formatting
Add a note about the dependency of the User->User mitigation on the
previous Spectre v2 IBPB selection.
Make the layout moar pretty.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-4-bp@alien8.de
Borislav Petkov (AMD) [Sat, 29 Jul 2023 15:20:33 +0000 (17:20 +0200)]
driver core: cpu: Unify redundant silly stubs
Make them all a weak function, aliasing to a single function which
issues the "Not affected" string.
No functional changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20230809102700.29449-3-bp@alien8.de
Borislav Petkov (AMD) [Sat, 29 Jul 2023 14:53:02 +0000 (16:53 +0200)]
Documentation/hw-vuln: Unify filename specification in index
Most of the index.rst files in Documentation/ refer to other rst files
without their file extension in the name. Do that here too.
No functional changes.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-2-bp@alien8.de
Pablo Neira Ayuso [Wed, 9 Aug 2023 13:00:36 +0000 (15:00 +0200)]
netfilter: nf_tables: remove busy mark and gc batch API
Ditch it, it has been replace it by the GC transaction API and it has no
clients anymore.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Wed, 9 Aug 2023 13:00:06 +0000 (15:00 +0200)]
netfilter: nft_set_hash: mark set element as dead when deleting from packet path
Set on the NFT_SET_ELEM_DEAD_BIT flag on this element, instead of
performing element removal which might race with an ongoing transaction.
Enable gc when dynamic flag is set on since dynset deletion requires
garbage collection after this patch.
Fixes:
d0a8d877da97 ("netfilter: nft_dynset: support for element deletion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Wed, 9 Aug 2023 12:54:23 +0000 (14:54 +0200)]
netfilter: nf_tables: adapt set backend to use GC transaction API
Use the GC transaction API to replace the old and buggy gc API and the
busy mark approach.
No set elements are removed from async garbage collection anymore,
instead the _DEAD bit is set on so the set element is not visible from
lookup path anymore. Async GC enqueues transaction work that might be
aborted and retried later.
rbtree and pipapo set backends does not set on the _DEAD bit from the
sync GC path since this runs in control plane path where mutex is held.
In this case, set elements are deactivated, removed and then released
via RCU callback, sync GC never fails.
Fixes:
3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Fixes:
8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Fixes:
9d0982927e79 ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Wed, 9 Aug 2023 12:31:54 +0000 (14:31 +0200)]
netfilter: nf_tables: GC transaction API to avoid race with control plane
The set types rhashtable and rbtree use a GC worker to reclaim memory.
From system work queue, in periodic intervals, a scan of the table is
done.
The major caveat here is that the nft transaction mutex is not held.
This causes a race between control plane and GC when they attempt to
delete the same element.
We cannot grab the netlink mutex from the work queue, because the
control plane has to wait for the GC work queue in case the set is to be
removed, so we get following deadlock:
cpu 1 cpu2
GC work transaction comes in , lock nft mutex
`acquire nft mutex // BLOCKS
transaction asks to remove the set
set destruction calls cancel_work_sync()
cancel_work_sync will now block forever, because it is waiting for the
mutex the caller already owns.
This patch adds a new API that deals with garbage collection in two
steps:
1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT
so they are not visible via lookup. Annotate current GC sequence in
the GC transaction. Enqueue GC transaction work as soon as it is
full. If ruleset is updated, then GC transaction is aborted and
retried later.
2) GC work grabs the mutex. If GC sequence has changed then this GC
transaction lost race with control plane, abort it as it contains
stale references to objects and let GC try again later. If the
ruleset is intact, then this GC transaction deactivates and removes
the elements and it uses call_rcu() to destroy elements.
Note that no elements are removed from GC lockless path, the _DEAD bit
is set and pointers are collected. GC catchall does not remove the
elements anymore too. There is a new set->dead flag that is set on to
abort the GC transaction to deal with set->ops->destroy() path which
removes the remaining elements in the set from commit_release, where no
mutex is held.
To deal with GC when mutex is held, which allows safe deactivate and
removal, add sync GC API which releases the set element object via
call_rcu(). This is used by rbtree and pipapo backends which also
perform garbage collection from control plane path.
Since element removal from sets can happen from control plane and
element garbage collection/timeout, it is necessary to keep the set
structure alive until all elements have been deactivated and destroyed.
We cannot do a cancel_work_sync or flush_work in nft_set_destroy because
its called with the transaction mutex held, but the aforementioned async
work queue might be blocked on the very mutex that nft_set_destroy()
callchain is sitting on.
This gives us the choice of ABBA deadlock or UaF.
To avoid both, add set->refs refcount_t member. The GC API can then
increment the set refcount and release it once the elements have been
free'd.
Set backends are adapted to use the GC transaction API in a follow up
patch entitled:
("netfilter: nf_tables: use gc transaction API in set backends")
This is joint work with Florian Westphal.
Fixes:
cfed7e1b1f8e ("netfilter: nf_tables: add set garbage collection helpers")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Thu, 10 Aug 2023 04:12:56 +0000 (21:12 -0700)]
Merge tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both also for stable:
- improve buffer validation when multiple EAs returned
- missing check for command payload size"
* tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd:
ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea()
ksmbd: validate command request size
Linus Torvalds [Thu, 10 Aug 2023 04:06:14 +0000 (21:06 -0700)]
Merge tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert a patch that unconditionally resolved addresses to inlines in
callchains, something that was done before when DWARF mode was asked
for, but could as well be done when just frame pointers (the default)
was selected.
This enriches the callchains with inlines but the way to resolve it
is gross right now, relying on addr2line, and even if we come up with
an efficient way of processing all the associated DWARF info for a
big file as vmlinux is, this has to be something people opt-in, as it
will still result in overheads, so revert it until we get this done
in a saner way.
- Update the x86 msr-index.h header with the kernel original, no change
in tooling output, just addresses a tools/perf build warning.
- Resolve a regression where special "tool events", such as
"duration_time" were being presented for all CPUs, when it only
makes sense to show it for the workload, that is, just once.
* tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Don't display zero tool counts
tools arch x86: Sync the msr-index.h copy with the kernel sources
Revert "perf report: Append inlines to non-DWARF callchains"
projects / platform / kernel / linux-starfive.git / log