scsi: mpi3mr: Support new power management framework

Switch to the new generic PCI power management framework. Also, remove
unnecessary calls to the PCI helper functions (such as
pci_set_power_state(), pci_enable_wake(), pci_save_state(),
pci_restore_state() etc).

Link: https://lore.kernel.org/r/20220912135742.11764-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Update mpi3 header files

Update the mpi3 header files.

Link: https://lore.kernel.org/r/20220912135742.11764-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"

This reverts commit 7ab4d2441b952977556672c2fe3f4c2a698cbb37 as it is
breaking the mpt3sas driver on big-endian machines.

Link: https://lore.kernel.org/r/20220916130111.168195-3-damien.lemoal@opensource.wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"

This reverts commit b4efbec4c2a75b619fae4e8768be379e88c78687 as it is
breaking the mpt3sas driver on big-endian machines.

Link: https://lore.kernel.org/r/20220916130111.168195-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO

The historical commit 5e018f7e60c9 ("Remove PC9800 support") from 2004 in
linux's history.git removed the config WD33C93_PIO to tweak the scsi
wd33c93 driver for the PC9800.

Some dead code in drivers/scsi/wd33c93.[ch] under an ifdef WD33C93_PIO
continued to remain in the repository until now.

Remove this dead code.

This issue was discovered with ./scripts/checkkconfigsymbols.py.

Link: https://lore.kernel.org/r/20220920112921.25275-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Add I/O timeout count for SCSI device

Currently struct scsi_device maintains counters for requests, completions,
and errors but is missing a counter for timeouts.

For better tracking of timeouts, add a suitable counter.

Link: https://lore.kernel.org/r/1663666339-17560-1-git-send-email-wubo40@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Populate sysfs attributes for vport

Few vport parameters were displayed by systool as 'Unknown' or 'NULL'.
Copy speed, supported_speed, frame_size and update port_type for NPIV port.

Link: https://lore.kernel.org/r/20220919134434.3513-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Replace one-element array with flexible-array member

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct fw_control_info.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/207
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
Link: https://lore.kernel.org/r/Yyy31OuBza1FJCXP@work
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: 3w-xxxx: Replace one-element array with flexible-array member

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct TAG_TW_New_Ioctl and refactor the rest of the code,
accordingly.

Notice that, in multiple places, the subtraction of 1 from
sizeof(TW_New_Ioctl) is removed, as this operation is now implicit
after the flex-array transformation.

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/206
Link: https://lore.kernel.org/r/YyyyvB30jnjRaw/F@work
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command()

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct hpt_iop_request_ioctl_command.

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/205
Link: https://lore.kernel.org/r/YyyUvuId7dAZadej@work
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hptiop: Use struct_size() helper in code related to struct hpt_iop_request_scsi_command

Prefer struct_size() over open-coded versions of idiom:

sizeof(struct-with-flex-array) + sizeof(typeof-flex-array-elements) * count

where count is the max number of items the flexible array is supposed to
contain.

Link: https://github.com/KSPP/linux/issues/160
Link: https://lore.kernel.org/r/54e2bb1e39b21394c5a90cacbadfb6136b012788.1663865333.git.gustavoars@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hptiop: Replace one-element array with flexible-array member

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct hpt_iop_request_scsi_command and refactor the rest of the
code, accordingly.

The following pieces of code suggest that the one element of array sg_list
in struct hpt_iop_request_scsi_command is not taken into account when
calculating the total size for both struct hpt_iop_request_scsi_command and
the maximum number of elements sg_list will contain:

1047         req->header.size = cpu_to_le32(
1048                                 sizeof(struct hpt_iop_request_scsi_command)
1049                                  - sizeof(struct hpt_iopsg)
1050                                  + sg_count * sizeof(struct hpt_iopsg));

1400         req_size = sizeof(struct hpt_iop_request_scsi_command)                            1401                 + sizeof(struct hpt_iopsg) * (hba->max_sg_descriptors - 1);

So it's safe to replace the one-element array with a flexible-array member
and update the code above, accordingly: now we don't need to subtract
sizeof(struct hpt_iopsg) from sizeof(struct hpt_iop_request_scsi_command)
because this is implicitly done by the flex-array transformation.

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/205
Link: https://lore.kernel.org/r/6238ccf37798e36d783f5ce5e483e6837e98be79.1663865333.git.gustavoars@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix running_req for internal abort commands

Disabling the remote phy for a SATA disk causes a hang:

root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols
sata
root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable
root@(none)$ [   67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed
[   67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache
[   67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK
[   67.935094] sd 0:0:2:0: [sdc] Stopping disk
[   67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK
...
[  123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds.
[  124.005960]   Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218
[  124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  124.019872] task:kworker/u192:1  state:D stack:0 pid:  642 ppid: 2 flags:0x00000008
[  124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker
[  124.034319] Call trace:
[  124.036758]  __switch_to+0x128/0x278
[  124.040333]  __schedule+0x434/0xa58
[  124.043820]  schedule+0x94/0x138
[  124.047045]  schedule_timeout+0x2fc/0x368
[  124.051052]  wait_for_completion+0xdc/0x200
[  124.055234]  __flush_workqueue+0x1a8/0x708
[  124.059328]  sas_porte_broadcast_rcvd+0xa8/0xc0
[  124.063858]  sas_port_event_worker+0x60/0x98
[  124.068126]  process_one_work+0x3f8/0x660
[  124.072134]  worker_thread+0x70/0x700
[  124.075793]  kthread+0x1a4/0x1b8
[  124.079014]  ret_from_fork+0x10/0x20

The issue is that the per-device running_req read in
pm8001_dev_gone_notify() never goes to zero and we never make progress.
This is caused by missing accounting for running_req for when an internal
abort command completes.

In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support")
we started to send internal abort commands as a proper sas_task. In this
when we deliver a sas_task to HW the per-device running_req is incremented
in pm8001_queue_command(). However it is never decremented for internal
abort commnds, so decrement in pm8001_mpi_task_abort_resp().

Link: https://lore.kernel.org/r/1663854664-76165-1-git-send-email-john.garry@huawei.com
Fixes: 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support")
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Fix use-after-free bug in smp_execute_task_sg()

When executing SMP task failed, the smp_execute_task_sg() calls del_timer()
to delete "slow_task->timer". However, if the timer handler
sas_task_internal_timedout() is running, the del_timer() in
smp_execute_task_sg() will not stop it and a UAF will happen. The process
is shown below:

      (thread 1)               |        (thread 2)
smp_execute_task_sg()          | sas_task_internal_timedout()
 ...                           |
 del_timer()                   |
 ...                           |  ...
 sas_free_task(task)           |
  kfree(task->slow_task) //FREE|
                               |  task->slow_task->... //USE

Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure
the timer handler have finished before the "task->slow_task" is
deallocated.

Link: https://lore.kernel.org/r/20220920144213.10536-1-duoming@zju.edu.cn
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_transport_fc: Adjust struct fc_nl_event flex array usage

In order to help the compiler reason about the destination buffer in struct
fc_nl_event, add a flexible array member for this purpose.  However, since
the header is UAPI, it must not change size or layout, so a union is used.

The allocation size calculations are also corrected (it was potentially
allocating an extra 8 bytes), and the padding is zeroed to avoid leaking
kernel heap memory contents.

Detected at run-time by the recently added memcpy() bounds checking:

  memcpy: detected field-spanning write (size 8) of single field "&event->event_data" at drivers/scsi/scsi_transport_fc.c:581 (size 4)

Link: https://lore.kernel.org/linux-next/42404B5E-198B-4FD3-94D6-5E16CF579EF3@linux.ibm.com/
Link: https://lore.kernel.org/r/20220921205155.1451649-1-keescook@chromium.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Remove redundant function definitions from ufshcd.h

Remove Query-Request API function declarations from include/ufs/ufshcd.h
and move them to the ufs core private header.

Link: https://lore.kernel.org/r/1663761485-2532-1-git-send-email-Arthur.Simchaev@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Make SCSI_MOD depend on BLOCK for cleaner .config files

SCSI_MOD is a helper config symbol for configuring RAID_ATTRS properly,
i.e., RAID_ATTRS needs to be m when SCSI=m.

This helper config symbol SCSI_MOD still shows up even in kernel
configurations that do not select the block subsystem and where SCSI is not
even a configuration option mentioned and selectable.

Make this SCSI_MOD depend on BLOCK, so that it only shows up when it is
slightly relevant in the kernel configuration.

Link: https://lore.kernel.org/r/20220919060112.24802-1-lukas.bulwahn@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: tracing: Fix compile error in trace_array calls when TRACING is disabled

Fix this compilation error seen when CONFIG_TRACING is not enabled:

drivers/scsi/qla2xxx/qla_os.c: In function 'qla_trace_init':
drivers/scsi/qla2xxx/qla_os.c:2854:25: error: implicit declaration of function
'trace_array_get_by_name'; did you mean 'trace_array_set_clr_event'?
[-Werror=implicit-function-declaration]
 2854 |         qla_trc_array = trace_array_get_by_name("qla2xxx");
      |                         ^~~~~~~~~~~~~~~~~~~~~~~
      |                         trace_array_set_clr_event

drivers/scsi/qla2xxx/qla_os.c: In function 'qla_trace_uninit':
drivers/scsi/qla2xxx/qla_os.c:2869:9: error: implicit declaration of function
'trace_array_put' [-Werror=implicit-function-declaration]
 2869 |         trace_array_put(qla_trc_array);
      |         ^~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20220907233308.4153-2-aeasi@marvell.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_transport_fc: Use %u for dev_loss_tmo

dev_loss_tmo is an unsigned value. Using "%d" as output format causes
irritating negative values to be shown in sysfs.

Link: https://lore.kernel.org/r/20220902131519.16513-1-mwilck@suse.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Convert sysfs snprintf() to sysfs_emit()

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.

Link: https://lore.kernel.org/r/20220901015130.419307-1-zhangxuezhi3@gmail.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Convert sysfs snprintf() to sysfs_emit()

Fix up sysfs show entries to use sysfs_emit()

Link: https://lore.kernel.org/r/20220831140325.396295-1-zhangxuezhi3@gmail.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvscsi_tgt: Fix repeated words in comment

Delete the redundant word 'to'.

Link: https://lore.kernel.org/r/20220908130910.35680-1-wangjianli@cdjrlc.com
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Update lpfc version to 14.2.0.7

Update lpfc version to 14.2.0.7

Link: https://lore.kernel.org/r/20220911221505.117655-14-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix various issues reported by tools

This patch fixes below Smatch reported issues:

 1. lpfc_hbadisc.c:3020 lpfc_mbx_cmpl_fcf_rr_read_fcf_rec()
    error: uninitialized symbol 'vlan_id'.

 2. lpfc_hbadisc.c:3121 lpfc_mbx_cmpl_read_fcf_rec()
    error: uninitialized symbol 'vlan_id'.

 3. lpfc_init.c:335 lpfc_dump_wakeup_param_cmpl()
    warn: always true condition '(prg->dist < 4) => (0-3 < 4)'

 4. lpfc_init.c:2419 lpfc_parse_vpd()
    warn: inconsistent indenting.

 5. lpfc_init.c:13248 lpfc_sli4_enable_msi()
    warn: 'phba->pcidev->irq' 2147483648 can't fit into 65535
    'eqhdl->irq'

 6. lpfc_debugfs.c:5300 lpfc_idiag_extacc_avail_get()
    error: uninitialized symbol 'ext_cnt'

 7. lpfc_debugfs.c:5300 lpfc_idiag_extacc_avail_get()
    error: uninitialized symbol 'ext_size'

 8. lpfc_vmid.c:248 lpfc_vmid_get_appid()
    warn: sleeping in atomic context.

 9. lpfc_init.c:8342 lpfc_sli4_driver_resource_setup()
    warn: missing error code 'rc'.

10. lpfc_init.c:13573 lpfc_sli4_hba_unset()
    warn: variable dereferenced before check 'phba->pport' (see
    line 13546)

11. lpfc_auth.c:1923 lpfc_auth_handle_dhchap_reply()
    error: double free of 'hash_value'

Fixes:

 1. Initialize vlan_id to LPFC_FCOE_NULL_VID.

 2. Initialize vlan_id to LPFC_FCOE_NULL_VID.

 3. prg->dist is a 2 bit field. Its value can only be between 0-3.
    Remove redundent check 'if (prg->dist < 4)'.

 4. Fix inconsistent indenting.  Moved logic into helper function
    lpfc_fill_vpd().

 5. Define 'eqhdl->irq' as int value as pci_irq_vector() returns int.
    Also, check for return value of pci_irq_vector() and log message in
    case of failure.

 6. Initialize 'ext_cnt' to 0.

 7. Initialize 'ext_size' to 0.

 8. Use alloc_percpu_gfp() with GFP_ATOMIC flag.

 9. 'rc' was not updated when dma_pool_create() fails.  Update 'rc =
     -ENOMEM' when dma_pool_create() fails before calling goto statement.

10. Add check for 'phba->pport' in lpfc_cpuhp_remove().

11. Initialize 'hash_value' to NULL, same like 'aug_chal' variable.

Link: https://lore.kernel.org/r/20220911221505.117655-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add reporting capability for Link Degrade Signaling

Firmware reports link degrade signaling via ACQES.

Handlers and new additions to the SET_FEATURES mbox command are implemented
so that link degrade parameters for 64GB capable links are reported through
EDC ELS frames.

Link: https://lore.kernel.org/r/20220911221505.117655-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Rework FDMI attribute registration for unintential padding

Removed the lpfc_fdmi_attr_entry and lpfc_fdmi_attr_def structures that had
a union causing unintentional zero padding, which required the usage of
__packed.  They are replaced with explicit lpfc_fdmi_attr_u32,
lpfc_fdmi_attr_wwn, lpfc_fdmi_attr_fc4types, and lpfc_fdmi_attr_string
structure defines instead of living in a union.  This rids of ambiguous
compiler zero padding, and entailed cleaning up bitwise endian
declarations.

As such, all FDMI attribute registration routines are replaced with generic
void *arg and handlers for each of the newly defined attribute structure
types.

Link: https://lore.kernel.org/r/20220911221505.117655-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Rework lpfc_fdmi_cmd() routine for cleanup and consistency

Switch case logics are reworked so they appear more similar and
consistent. This eliminates compiler errors indicating unaligned pointer
values and packed members.

Added comments to explain previous size offset accumulations.

Link: https://lore.kernel.org/r/20220911221505.117655-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Rename mp/bmp dma buffers to rq/rsp in lpfc_fdmi_cmd

Clarify naming of the mp/bmp dma buffers:

 - Rename mp to rq as it is the request buffer

 - Rename bmp to rsp as it is the response buffer

This reduces confusion about what the buffer content is based on their
name.

Link: https://lore.kernel.org/r/20220911221505.117655-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Update congestion mode logging for Emulex SAN Manager application

If there is a congestion or automated congestion response mode change, then
log the reported change to kmsg.

Link: https://lore.kernel.org/r/20220911221505.117655-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Move scsi_host_template outside dynamically allocated/freed phba

On a PCI hotplug capable system, it is possible for scsi_device_put() to
happen after lpfc_pci_remove_one() is called.  As a result, the
sdev->host->hostt->module dereference is for a previously freed memory
location because the phba structure containing the hostt template was
already freed when lpfc_pci_remove_one() returned.

Since the lpfc module is still loaded during power slot disable, all
scsi_host_templates should be declared as part of the global data segment
instead of inside the heap allocated phba structure.  This way the
sdev->host->hostt memory area is always valid as long as the module is
loaded regardless if PCI hotplug dynamically allocates or frees phba
structures.

Move all scsi_host_templates in the phba structure to global variables.
Create a small helper routine to determine appropriate sg_tablesize during
shost allocation.

Link: https://lore.kernel.org/r/20220911221505.117655-7-jsmart2021@gmail.com
Co-developed-by: Dwip N. Banerjee <dnbanerg@us.ibm.com>
Signed-off-by: Dwip N. Banerjee <dnbanerg@us.ibm.com>
Co-developed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix multiple NVMe remoteport registration calls for the same NPort ID

When a target makes the mistake of registering a FC4 type with the fabric,
but then rejects a PRLI of that type, the lpfc driver incorrectly retries
the PRLI causing multiple registrations with the transport. The driver
needs to detect the reject reason data and stop any retry.

Rework the PRLI reject scenarios.

Link: https://lore.kernel.org/r/20220911221505.117655-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add missing free iocb and nlp kref put for early return VMID cases

Sometimes VMID targets are not getting rediscovered after a port reset.

The iocb is not freed in lpfc_cmpl_ct_cmd_vmid(), which is the completion
function for the appid CT commands.  So after a port reset, the count of
sges is less than the expected count of 250.  This causes post reset
operation logic to fail and keep the port offline.

Fix by freeing the iocb and kref put for the lpfc_cmpl_ct_cmd_vmid() early
return cases.

Link: https://lore.kernel.org/r/20220911221505.117655-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix mbuf pool resource detected as busy at driver unload

In a situation where the node state changes while a REG_LOGIN is in
progress, the LPFC_MBOXQ_t structure is cleared and reused for an
UNREG_LOGIN command to release RPI resources without first freeing the mbuf
pool resource allocated for REG_LOGIN.

Release mbuf pool resource prior to repurposing of the mailbox command
structure from REG_LOGIN to UNREG_LOGIN.

Link: https://lore.kernel.org/r/20220911221505.117655-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix FLOGI ACC with wrong SID in PT2PT topology

When a FLOGI is received before we have issued our FLOGI, the ACC response
to the received FLOGI is issued with SID 2 instead of the expected fabric
controller SID.  Certain target vendors ignore the malformed ACC with SID 2
and wait for a properly filled ACC with a fabric controller SID.

The lpfc_sli_prep_wqe() routine depends on the FC_PT2PT flag to fill in the
fabric controller SID when in PT2PT mode, but due to a previous commit the
flag was getting cleared.  Fix by adding a check for the defer_flogi_acc
flag to know whether or not to clear the FC_PT2PT flag on link up.

Link: https://lore.kernel.org/r/20220911221505.117655-3-jsmart2021@gmail.com
Fixes: 439b93293ff2 ("scsi: lpfc: Fix unsolicited FLOGI receive handling during PT2PT discovery")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix prli_fc4_req checks in PRLI handling

The if statment check (prli_fc4_req & PRLI_NVME_TYPE) evaluates to true
when receiving a PRLI request for bogus FC4 type codes that happen to have
the 3rd or 5th bit set because PRLI_NVME_TYPE is 0x28.  This leads to
sending a PRLI_NVME_ACC even for bogus FC4 type codes.

Change the bitwise & check to an exact == type code check to ensure we send
PRLI_NVME_ACC only for NVME type coded PRLI requests.

Link: https://lore.kernel.org/r/20220911221505.117655-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Fix error code in mpi3mr_transport_smp_handler()

The error code from mpi3mr_post_transport_req() is supposed to be passed to
bsg_job_done(job, rc, reslen), but it isn't.

Link: https://lore.kernel.org/r/YyMISJzVDARpVwrr@kili
Fixes: 176d4aa69c6e ("scsi: mpi3mr: Support SAS transport class callbacks")
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Fix error codes in mpi3mr_report_manufacture()

There are three error paths which return success:

1) Propagate the error code from mpi3mr_post_transport_req() if it fails.

2) Return -EINVAL if "ioc_status != MPI3_IOCSTATUS_SUCCESS".

3) Return -EINVAL if "le16_to_cpu(mpi_reply.response_data_length) !=
   sizeof(struct rep_manu_reply)"

Link: https://lore.kernel.org/r/YyMIJh1HU2Qz9+Rs@kili
Fixes: 2bd37e284914 ("scsi: mpi3mr: Add framework to issue MPT transport cmds")
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aic79xx: Use __ro_after_init explicitly

ahd_linux_setup_iocell_info() intentionally writes to the const-marked
aic79xx_iocell_info array, but is called during __init, so the location is
actually writable at this point on most architectures. Annotate this
explicitly with __ro_after_init to avoid static analysis confusion.

Link: https://lpc.events/event/16/contributions/1175/attachments/1109/2128/2022-LPC-analyzer-talk.pdf
Link: https://lore.kernel.org/r/20220914115953.3854029-1-keescook@chromium.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: David Malcolm <dmalcolm@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Remove unused se_tmr_req_cache declaration

se_tmr_req_cache has been removed since commit c8e31f26feeb ("target: Add
SCF_SCSI_TMR_CDB usage and drop se_tmr_req_cache").

Remove extern.

Link: https://lore.kernel.org/r/20220913023722.547249-3-cuigaosheng1@huawei.com
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove unused declarations for qla2xxx

qla2x00_get_fw_version_str() has been removed since commit abbd8870b9cb
("[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call
tables.").

qla2x00_release_nvram_protection() has been removed since commit
459c537807bd ("[SCSI] qla2xxx: Add ISP24xx flash-manipulation routines.").

qla82xx_rdmem() and qla82xx_wrmem() have been removed since commit
3711333dfbee ("[SCSI] qla2xxx: Updates for ISP82xx.").

qla25xx_rd_req_reg(), qla24xx_rd_req_reg(), qla25xx_wrt_rsp_reg(),
qla24xx_wrt_rsp_reg(), qla25xx_wrt_req_reg() and qla24xx_wrt_req_reg() have
been removed since commit 08029990b25b ("[SCSI] qla2xxx: Refactor
request/response-queue register handling.").

qla2x00_async_login_done() has been removed since commit 726b85487067
("qla2xxx: Add framework for async fabric discovery").

qlt_24xx_process_response_error() has been removed since commit
c5419e2618b9 ("scsi: qla2xxx: Combine Active command arrays.").

Remove the declarations for them from header file.

Link: https://lore.kernel.org/r/20220913023722.547249-2-cuigaosheng1@huawei.com
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: alua: Do not report emtpy port group

The default target port group is always returned in the list of port
groups, even if the behaviour is unwanted, i.e. it has no members and
non-default port groups are primary port groups.

That violates SPC-4 "6.37 REPORT TARGET PORT GROUPS command":

  Every target port group shall contain at least one target port. The
  target port group descriptor shall include one target port descriptor for
  each target port in the target port group.

This patch hides port groups with no ports in REPORT TARGET PORT GROUPS
response.

Link: https://lore.kernel.org/r/20220912214549.27882-1-d.bogdanov@yadro.com
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Set MULTIP bit for se_device with multiple ports

SAM-5 4.8.3 (SCSI target device with multiple SCSI ports structure)
obligates to set MULTIP bit when there's multiple SCSI target ports:

  Each device server shall indicate the presence of multiple SCSI
  target ports by setting the MULTIP bit to one in its standard
  INQUIRY data (see SPC-4).

Set MULTIP bit automatically to indicate the presence of multiple SCSI
target ports within standard inquiry response data if there are
multiple target ports in all target port groups of the se_device.

Link: https://lore.kernel.org/r/20220912125457.22573-2-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Co-developed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix spelling mistake "definiton" -> "definition"

There is a spelling mistake in a MODULE_PARM_DESC description. Fix it.

Link: https://lore.kernel.org/r/20220906140010.194273-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset

Remote devices may go missing from the per-device nexus reset part of the
HA nexus, i.e after the controller reset. This is because libsas may find
the devices to be gone as the phy may be temporarily down when processing
the bcast event generated from the nexus reset. Filter out bcast events
during this time to stop the devices being lost.

Link: https://lore.kernel.org/r/1662378529-101489-6-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Add helper to process bcast events

Add a helper for bcast processing to reduce duplication.

Link: https://lore.kernel.org/r/1662378529-101489-5-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()

In resetting the controller, SATA devices may be lost.

The issue is that when we insert the bcast events to rescan the topology in
hisi_sas_rescan_topology(), when we subsequently nexus reset the SATA
devices in hisi_sas_async_I_T_nexus_reset(), there is a small timing window
in which the remote phy is down and we process the bcast event (meaning
that libsas judges that the disk is lost).

Ensure that all bcast events are processed prior to the nexus reset to
close this window.

Link: https://lore.kernel.org/r/1662378529-101489-4-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Clear HISI_SAS_HW_FAULT_BIT earlier

Once the controller HW has been reset then we can unset flag
HISI_SAS_HW_FAULT_BIT. In clearing this flag earlier we can now
successfully execute commands in hisi_sas_controller_reset_done(), like
bcast processing.

Link: https://lore.kernel.org/r/1662378529-101489-3-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Revert change to limit max hw sectors for v3 HW

Now that libsas and the SCSI core code limits the default sectors from
commit 4cbfca5f7750 ("scsi: scsi_transport_sas: cap shost opt_sectors
according to DMA optimal limit") and commit 608128d391fa ("scsi: sd: allow
max_sectors be capped at DMA optimal size limit"), there is no need for
the hack to limit the max HW sectors.

Link: https://lore.kernel.org/r/1662378529-101489-2-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: esas2r: Use flex array destination for memcpy()

In preparation for FORTIFY_SOURCE performing run-time destination buffer
bounds checking for memcpy(), specify the destination output buffer
explicitly, instead of asking memcpy() to write past the end of what looked
like a fixed-size object. Silences future run-time warning:

  memcpy: detected field-spanning write (size 80) of single field "trc + 1" (size 64)

There is no binary code output differences from this change.

Link: https://lore.kernel.org/r/20220901205729.2260982-1-keescook@chromium.org
Cc: Bradley Grove <linuxdrivers@attotech.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: 3w-9xxx: Avoid disabling device if failing to enable it

The original code will "goto out_disable_device" and call
pci_disable_device() if pci_enable_device() fails. The kernel will generate
a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled
device".

We shouldn't disable a device that failed to be enabled. A simple return is
fine.

Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Print UFSHCD capabilities in controller's sysfs node

Userspace may want to manually control when the data should go into
WriteBooster buffer. The control happens via "wb_on" node, but presently,
there is no simple way to check if WriteBooster is supported and
enabled.

Expose the Write Booster and Clock Scaling capabilities to be able to
determine if the Write Booster is available and if its manual control is
blocked by Clock Scaling mechanism.

Link: https://lore.kernel.org/r/20220829081845.v8.1.Ibf9efc9be50783eeee55befa2270b7d38552354c@changeid
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Daniil Lunev <dlunev@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qlogicpti: Fix dma_map_sg() check

Add missing error check for dma_map_sg().

Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20220826101435.79170-1-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove useless host error codes

The host codes that were supposed to only be used for internal use are now
not used, so remove them.

Link: https://lore.kernel.org/r/20220812010027.8251-11-michael.christie@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Convert scsi_decide_disposition() to use SCSIML_STAT

Don't use:

 - DID_TARGET_FAILURE

 - DID_NEXUS_FAILURE

 - DID_ALLOC_FAILURE

 - DID_MEDIUM_ERROR

Instead use the SCSI midlayer internal values.

Link: https://lore.kernel.org/r/20220812010027.8251-10-michael.christie@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Add error codes for internal SCSI midlayer use

If a driver returns:

 - DID_TARGET_FAILURE

 - DID_NEXUS_FAILURE

 - DID_ALLOC_FAILURE

 - DID_MEDIUM_ERROR

we hit a couple bugs:

1. The SCSI error handler runs because scsi_decide_disposition() has no
case statements for them and we return FAILED.

2. For SG IO the userspace app gets a success status instead of failed,
because scsi_result_to_blk_status() clears those errors.

This patch adds a new internal error code byte for use by the SCSI
midlayer.  This will be used instead of the above error codes, so we don't
have to play that clearing the host code game in
scsi_result_to_blk_status() and drivers cannot accidentally use them.

A subsequent commit will then remove the internal users of the above codes
and convert us to use the new ones.

Link: https://lore.kernel.org/r/20220812010027.8251-9-michael.christie@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Drop DID_ALLOC_FAILURE use

DID_ALLOC_FAILURE is internal to the SCSI layer. Drivers must not use it
because:

 1. It's not propagated upwards, so SG IO/passthrough users will not see an
    error and think a command was successful.

 2. There is no handling for it in scsi_decide_disposition() so it results
    in entering SCSI error handling.

By the code comment, it looks like the driver wanted a retryable error
code, so this has it use DID_ERROR.

Link: https://lore.kernel.org/r/20220812010027.8251-8-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Drop DID_TARGET_FAILURE use

DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:

 1. It's not propagated upwards, so SG IO/passthrough users will not see an
    error and think a command was successful.

 2. There is no handling for it in scsi_decide_disposition() so it
    results in entering SCSI error handling.

This has qla2xxx use DID_NO_CONNECT because it looks like we hit this error
when we can't find a port. It will give us the same hard error behavior and
it seems to match the error where we can't find the endpoint.

Link: https://lore.kernel.org/r/20220812010027.8251-7-michael.christie@oracle.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: virtio_scsi: Drop DID_NEXUS_FAILURE use

DID_NEXUS_FAILURE is internal to the SCSI layer. Drivers must not use it
because:

 1. It's not propagated upwards, so SG IO/passthrough users will not see an
    error and think a command was successful.

 2. There is no handling for it in scsi_decide_disposition() so it results
    in entering SCSI error handling.

virtio_scsi gets this when something like qemu returns
VIRTIO_SCSI_S_NEXUS_FAILURE. It looks like qemu returns that error code if
host OS returns DID_NEXUS_FAILURE (qemu's internal
SCSI_HOST_RESERVATION_ERROR maps to DID_NEXUS_FAILURE). This shouldn't
happen for Linux since we don't propagate that error code to userspace.

This has us convert VIRTIO_SCSI_S_NEXUS_FAILURE to a
SAM_STAT_RESERVATION_CONFLICT in case some other virt layer is returning
it. In that case we will still get the reservation confict failure we
expect.

Link: https://lore.kernel.org/r/20220812010027.8251-6-michael.christie@oracle.com
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: virtio_scsi: Drop DID_TARGET_FAILURE use

DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:

 1. It's not propagated upwards, so SG IO/passthrough users will not see an
    error and think a command was successful.

 2. There is no handling for it in scsi_decide_disposition() so it results
    in entering SCSI error handling.

virtio_scsi gets this when something like qemu returns
VIRTIO_SCSI_S_TARGET_FAILURE.  It looks like qemu returns that error code
if a host OS returns it, but this shouldn't happen for Linux since we never
propagate that error to userspace.

This has us use DID_BAD_TARGET in case some other virt layer is returning
it. In that case we will still get a hard error like before and it conveys
something unexpected happened.

Link: https://lore.kernel.org/r/20220812010027.8251-5-michael.christie@oracle.com
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: uas: Drop DID_TARGET_FAILURE use

DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:

 1. It's not propagated upwards, so SG IO/passthrough users will not see an
    error and think a command was successful.

 2. There is no handling for it in scsi_decide_disposition() so it results
    in entering SCSI error handling.

It looks like the driver wanted a hard failure so this swaps it with
DID_BAD_TARGET which gives us that behavior. The error looks like it's for
a case where the target did not support a TMF we wanted to use (maybe not a
bad target but disappointing so close enough).

Link: https://lore.kernel.org/r/20220812010027.8251-4-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: storvsc: Drop DID_TARGET_FAILURE use

DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:

 1. It's not propagated upwards, so SG IO/passthrough users will not see an
    error and think a command was successful.

 2. There is no handling for it in scsi_decide_disposition() so it results
    in the SCSI error handling running.

It looks like the driver wanted a hard failure so swap it with
DID_BAD_TARGET.

Link: https://lore.kernel.org/r/20220812010027.8251-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: xen: Drop use of internal host codes

The error codes:

 - DID_TARGET_FAILURE

 - DID_NEXUS_FAILURE

 - DID_ALLOC_FAILURE

 - DID_MEDIUM_ERROR

are internal to the SCSI layer. Drivers must not use them because:

 1. They are not propagated upwards, so SG IO/passthrough users will not
    see an error and think a command was successful.

    xen-scsiback will never see this error and should not try to send it.

 2. There is no handling for them in scsi_decide_disposition() so if
    xen-scsifront were to return the error to the SCSI midlayer then it
    kicks off the error handler which is definitely not what we want.

Remove the use from xen-scsifront/back.

Link: https://lore.kernel.org/r/20220812010027.8251-2-michael.christie@oracle.com
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: pscsi: Remove repeated word "calling"

There is repeated word, remove it.

Link: https://lore.kernel.org/r/20220811153923.17278-1-dengshaomin@cdjrlc.com
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: Simplify {clear|set}_bit() parameters

{clear|set}_bit() can take an almost arbitrarily large bit number, so there
is no need to manually compute addresses. This is just redundant.

Link: https://lore.kernel.org/r/c3429a22023f58e5e5cc65d6cd7e83fb2bd9b870.1658340442.git.christophe.jaillet@wanadoo.fr
Tested-by: Don Brace <don.brace@microchip.com>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: Use the bitmap API to allocate bitmaps

Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less
verbose and it improves the semantic.

Link: https://lore.kernel.org/r/5f975ef43f8b7306e4ac4e2e8ce4bcd53f6092bb.1658340441.git.christophe.jaillet@wanadoo.fr
Tested-by: Don Brace <don.brace@microchip.com>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Remove unneeded result variable

Return the value from lpfc_issue_reg_vfi() directly instead of storing it
in another redundant variable.

Link: https://lore.kernel.org/r/20220824075123.221316-1-ye.xingchen@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Remove the unneeded result variable

Return the value from lpfc_sli4_issue_wqe() directly instead of storing it
in another redundant variable.

Link: https://lore.kernel.org/r/20220824075017.221244-1-ye.xingchen@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: docs: Fix a typo

Correct a typo in SCSI documentation.

Link: https://lore.kernel.org/r/20220827221719.11006-1-rdunlap@infradead.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Update version to 10.02.07.900-k

Link: https://lore.kernel.org/r/20220826102559.17474-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Define static symbols

drivers/scsi/qla2xxx/qla_os.c:40:20: warning: symbol 'qla_trc_array'
was not declared. Should it be static?
drivers/scsi/qla2xxx/qla_os.c:345:5: warning: symbol
'ql2xdelay_before_pci_error_handling' was not declared.
Should it be static?

Define qla_trc_array and ql2xdelay_before_pci_error_handling as static to
fix sparse warnings.

Link: https://lore.kernel.org/r/20220826102559.17474-7-njavali@marvell.com
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Enhance driver tracing with separate tunable and more

Older tracing of driver messages was to:

    - log only debug messages to kernel main trace buffer; and

    - log only if extended logging bits corresponding to this message is
      off

This has been modified and extended as follows:

    - Tracing is now controlled via ql2xextended_error_logging_ktrace
      module parameter. Bit usages same as ql2xextended_error_logging.

    - Tracing uses "qla2xxx" trace instance, unless instance creation have
      issues.

    - Tracing is enabled (compile time tunable).

    - All driver messages, include debug and log messages are now traced in
      kernel trace buffer.

Trace messages can be viewed by looking at the qla2xxx instance at:

    /sys/kernel/tracing/instances/qla2xxx/trace

Trace tunable that takes the same bit mask as ql2xextended_error_logging
is:

    ql2xextended_error_logging_ktrace (default=1)

Link: https://lore.kernel.org/r/20220826102559.17474-6-njavali@marvell.com
Suggested-by: Daniel Wagner <dwagner@suse.de>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add NVMe parameters support in Auxiliary Image Status

Add new API to obtain the NVMe Parameters region status from the Auxiliary
Image Status bitmap.

Link: https://lore.kernel.org/r/20220826102559.17474-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add debugfs create/delete helpers

Define a few helpful macros for creating debugfs files.

Link: https://lore.kernel.org/r/20220826102559.17474-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix response queue handler reading stale packets

On some platforms, the current logic of relying on finding new packet
solely based on signature pattern can lead to driver reading stale
packets. Though this is a bug in those platforms, reduce such exposures by
limiting reading packets until the IN pointer.

Link: https://lore.kernel.org/r/20220826102559.17474-3-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Revert "scsi: qla2xxx: Fix response queue handler reading stale packets"

Reverting this commit so that a fixed up patch, without adding new module
parameters, can be submitted.

Link: https://lore.kernel.org/stable/166039743723771@kroah.com/
This reverts commit b1f707146923335849fb70237eec27d4d1ae7d62.

Link: https://lore.kernel.org/r/20220826102559.17474-2-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Log message "skipping scsi_scan_host()" as informational

This message is helpful to troubleshoot missing LUNs/SAN boot errors.  It'd
be nice to log it by default instead of only being enabled with debug.

This user had an accidental/forgotten file modprobe.d/qla2xxx.conf w/
option qlini_mode=disabled from experiments with FC target mode, and their
boot LUN didn't come up, as it skips SCSI scan, of course.

However, their boot log didn't provide any clues to help understand that.

The issue/message could be figured out w/ ql2xextended_error_logging, but
it would have been simpler (or even deflected/addressed by user) if it had
been there by default. And it also would help support/triage/deflection
tooling.

Expected change:

 scsi host15: qla2xxx
+qla2xxx [0000:3b:00.0]-00fb:15: skipping scsi_scan_host() for non-initiator port
 qla2xxx [0000:3b:00.0]-00fb:15: QLogic QLE2692 - QLE2692 Dual Port 16Gb FC to PCIe Gen3 x8 Adapter.

According to:

  qla2x00_probe_one()
  ...
          ret = scsi_add_host(...);
  ...
                  ql_log(ql_log_info, ...
                          "skipping scsi_scan_host() for non-initiator port\n");
  ...
          ql_log(ql_log_info, ...
              "QLogic %s - %s.\n", ha->model_number, ha->model_desc);

Link: https://lore.kernel.org/r/20220825120159.275051-1-mfo@canonical.com
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Update driver version to 43.100.00.00

Update driver version to 43.100.00.00.

Link: https://lore.kernel.org/r/20220825075457.16422-5-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Increase cmd_per_lun to 128

With cmd_per_lun value 7, a higher number of cache lines (map_nr) are
needed while allocating sdev->budget_map which is not reasonable and hence
increase the cmd_per_lun value to 128.

Link: https://lore.kernel.org/r/20220825075457.16422-4-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix trace buffer registration failed

The ExtendedType field was set to 1 in the diag buffer register command and
hence MPT Endpoint firmware is failing the request with Invalid Field
IOCStatus.

memset the request frame to zero before framing the diag buffer register
command.

Link: https://lore.kernel.org/r/20220825075457.16422-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Don't change DMA mask while reallocating pools

When a pool crosses the 4GB boundary region then before reallocating pools
change the coherent DMA mask to 32 bits and keep the normal DMA mask set to
63/64 bits.

Link: https://lore.kernel.org/r/20220825075457.16422-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Prevent error handler escalation when device removed

If SCSI error handling is taking place for timed out I/Os on a drive and
the corresponding drive is removed, then stop escalating to higher level of
reset by returning the TUR with "I_T NEXUS LOSS OCCURRED" sense key.

Link: https://lore.kernel.org/r/20220816080801.13929-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: Use struct_size() in code related to struct MR_PD_CFG_SEQ_NUM_SYNC

Prefer struct_size() over open-coded versions of idiom:

        sizeof(struct-with-flex-array) + sizeof(type-of-flex-array) * count

where count is the max number of items the flexible array is supposed to
have.

Link: https://github.com/KSPP/linux/issues/160
Link: https://lore.kernel.org/r/b215f4760f0e8fbe5fc35be20f2487e89924424d.1660592640.git.gustavoars@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: Use struct_size() in code related to struct MR_FW_RAID_MAP

Prefer struct_size() over open-coded versions of idiom:

sizeof(struct-with-flex-array) + sizeof(type-of-flex-array) * count

where count is the max number of items the flexible array is supposed to
have.

Link: https://github.com/KSPP/linux/issues/160
Link: https://lore.kernel.org/r/1211398fb8f7ab332a93f4f8f1a63e8168dbd002.1660592640.git.gustavoars@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_PD_CFG_SEQ_NUM_SYNC

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct MR_PD_CFG_SEQ_NUM_SYNC and refactor the rest of the code
accordingly.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays [0].

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://reviews.llvm.org/D126864
Link: https://lore.kernel.org/r/78e9261591db072b67fcf49f0216d7046a67ca6d.1660592640.git.gustavoars@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_DRV_RAID_MAP

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct MR_DRV_RAID_MAP and refactor the code accordingly.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/r/1448f387821833726b99f0ce13069ada89164eb5.1660592640.git.gustavoars@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhanced-by: Kees Cook <keescook@chromium.org> # Change in struct MR_DRV_RAID_MAP_ALL

scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_FW_RAID_MAP_DYNAMIC

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct MR_FW_RAID_MAP_DYNAMIC.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/r/896476f8fe43cf83b491c6c13f59c9ace780d82c.1660592640.git.gustavoars@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_FW_RAID_MAP

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct MR_DRV_RAID_MAP and refactor the the rest of the code
accordingly.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/r/4495ce170c8ef088a10f1abe0e7c227368f43242.1660592640.git.gustavoars@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhanced-by: Kees Cook <keescook@chromium.org> # Change in struct MR_FW_RAID_MAP_ALL

scsi: qla2xxx: Avoid flush_scheduled_work() usage

Although qla2xxx driver is calling schedule_{,delayed}_work() from 10
locations, I assume that flush_scheduled_work() from qlt_stop_phase1()
needs to flush only works scheduled by qlt_sched_sess_work(), for this loop
continues while "struct qla_tgt"->sess_works_list is not empty.

Link: https://lore.kernel.org/r/133c6723-90b6-5c8b-72b4-cc01eeb3a8c0@I-love.SAKURA.ne.jp
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Always wait for qlt_sess_work_fn() from qlt_stop_phase1()

Currently qlt_stop_phase1() may fail to call flush_scheduled_work(), for
list_empty() may return true as soon as qlt_sess_work_fn() called
list_del(). In order to close this race window, check list_empty() after
calling flush_scheduled_work().

If this patch causes problems, please check commit c4f135d64382
("workqueue: Wrap flush_workqueue() using a macro"). We are on the way to
remove all flush_scheduled_work() calls from the kernel.

Link: https://lore.kernel.org/r/7f24469d-9e39-3398-d851-329b54c0b923@I-love.SAKURA.ne.jp
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove unused qlt_tmr_work()

qlt_tmr_work() is no longer used since commit fb35265b12bb ("scsi:
qla2xxx: Remove session creation redundant code").

Link: https://lore.kernel.org/r/a0e53c70-b801-adf5-0549-b2b1e421a819@I-love.SAKURA.ne.jp
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove unused del_sess_list field

"struct qla_tgt"->del_sess_list is no longer used since commit
726b85487067 ("qla2xxx: Add framework for async fabric discovery").

Link: https://lore.kernel.org/r/0c335e86-5624-b599-5137-f1377419fb0c@I-love.SAKURA.ne.jp
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Copyright updates for 14.2.0.6 patches

Update copyrights to 2022 for files modified in the 14.2.0.6 patch set.

Link: https://lore.kernel.org/r/20220819011736.14141-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Update lpfc version to 14.2.0.6

Update lpfc version to 14.2.0.6.

Link: https://lore.kernel.org/r/20220819011736.14141-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Remove SANDiags related code

The SANDiags feature is unused, and related code is removed.

Link: https://lore.kernel.org/r/20220819011736.14141-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add warning notification period to CMF_SYNC_WQE

Add capability to specify warning notification period to help firmware
adjust to congestion accordingly.

Link: https://lore.kernel.org/r/20220819011736.14141-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Rework MIB Rx Monitor debug info logic

The kernel test robot reported the following sparse warning:

arch/arm64/include/asm/cmpxchg.h:88:1: sparse: sparse: cast truncates
   bits from constant value (369 becomes 69)

On arm64, atomic_xchg only works on 8-bit byte fields.  Thus, the macro
usage of LPFC_RXMONITOR_TABLE_IN_USE can be unintentionally truncated
leading to all logic involving the LPFC_RXMONITOR_TABLE_IN_USE macro to not
work properly.

Replace the Rx Table atomic_t indexing logic with a new
lpfc_rx_info_monitor structure that holds a circular ring buffer.  For
locking semantics, a spinlock_t is used.

Link: https://lore.kernel.org/r/20220819011736.14141-4-jsmart2021@gmail.com
Fixes: 17b27ac59224 ("scsi: lpfc: Add rx monitoring statistics")
Cc: <stable@vger.kernel.org> # v5.15+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix null ndlp ptr dereference in abnormal exit path for GFT_ID

An error case exit from lpfc_cmpl_ct_cmd_gft_id() results in a call to
lpfc_nlp_put() with a null pointer to a nodelist structure.

Changed lpfc_cmpl_ct_cmd_gft_id() to initialize nodelist pointer upon
entry.

Link: https://lore.kernel.org/r/20220819011736.14141-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix unsolicited FLOGI receive handling during PT2PT discovery

During a stress offline/online test in PT2PT topology, target rediscovery
can fail with a specific target vendor array.

When the HBA transitions to online mode it is possible to receive an
unsolicited FLOGI before processing the Link Up event. The received FLOGI
will set the defer_flogi_acc_flag, which instructs the driver to wait until
it transmits its own FLOGI before ACKing the received FLOGI.  In this
failure scenario, the link up processing clears the set
defer_flogi_acc_flag before we have sent out the FLOGI.  As the target has
the higher WWPN and is responsible for sending the PLOGI, the target is
stuck waiting for its FLOGI_ACC that the driver will never send.

Remove the clear of defer_flogi_acc_flag from Link Up event processing.  In
this stress test case, the defer_flogi_acc_flag is cleared during the Link
Down event processing anyways.

Link: https://lore.kernel.org/r/20220819011736.14141-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: st: Remove redundant variable pointer stp

Variable stp is assigned a value that is never read, the assignment and the
variable stp are redundant and can be removed.

Cleans up clang scan build warning:

drivers/scsi/st.c:4253:7: warning: Although the value stored to 'stp'
is used in the enclosing expression, the value is never actually
read from 'stp' [deadcode.DeadStores]

Link: https://lore.kernel.org/r/20220805115652.2340991-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Remove redundant assignment to variable mfiStatus

The variable mfiStatus is assigned a value but it is never read. The
assignment is redundant and can be removed. Also remove { } as the return
statement does not need to be in its own code block.

Cleans up clang scan build warning:

drivers/scsi/megaraid/megaraid_sas_base.c:4026:7: warning: Although the
value stored to 'mfiStatus' is used in the enclosing expression, the
value is never actually read from 'mfiStatus' [deadcode.DeadStores]

Link: https://lore.kernel.org/r/20220805115042.2340400-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>