Jamie Lentin [Mon, 2 Oct 2023 15:09:14 +0000 (15:09 +0000)]
hid: lenovo: Resend all settings on reset_resume for compact keyboards
commit
2f2bd7cbd1d1548137b351040dc4e037d18cdfdc upstream.
The USB Compact Keyboard variant requires a reset_resume function to
restore keyboard configuration after a suspend in some situations. Move
configuration normally done on probe to lenovo_features_set_cptkbd(), then
recycle this for use on reset_resume.
Without, the keyboard and driver would end up in an inconsistent state,
breaking middle-button scrolling amongst other problems, and twiddling
sysfs values wouldn't help as the middle-button mode won't be set until
the driver is reloaded.
Tested on a USB and Bluetooth Thinkpad Compact Keyboard.
CC: stable@vger.kernel.org
Fixes:
94eefa271323 ("HID: lenovo: Use native middle-button mode for compact keyboards")
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Link: https://lore.kernel.org/r/20231002150914.22101-1-martink@posteo.de
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Mon, 2 Oct 2023 09:48:13 +0000 (12:48 +0300)]
selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests
commit
ef43c30858754d99373a63dff33280a9969b49bc upstream.
The initial value of 5% chosen for the maximum allowed percentage
difference between resctrl mbm value and IMC mbm value in
commit
06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting
format") was "randomly chosen value" (as admitted by the changelog).
When running tests in our lab across a large number platforms, 5%
difference upper bound for success seems a bit on the low side for the
MBA and MBM tests. Some platforms produce outliers that are slightly
above that, typically 6-7%, which leads MBA/MBM test frequently
failing.
Replace the "randomly chosen value" with a success bound that is based
on those measurements across large number of platforms by relaxing the
MBA/MBM success bound to 8%. The relaxed bound removes the failures due
the frequent outliers.
Fixed commit description style error during merge:
Shuah Khan <skhan@linuxfoundation.org>
Fixes:
06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Mon, 2 Oct 2023 09:48:10 +0000 (12:48 +0300)]
selftests/resctrl: Move _GNU_SOURCE define into Makefile
commit
3a1e4a91aa454a1c589a9824d54179fdbfccde45 upstream.
_GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large
impact on what gets defined when including headers either before or
after it. This can result in compile failures if .c file decides to
include a standard header file before resctrl.h.
It is safer to define _GNU_SOURCE in Makefile so it is always defined
regardless of in which order includes are done.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Mon, 2 Oct 2023 09:48:09 +0000 (12:48 +0300)]
selftests/resctrl: Remove duplicate feature check from CMT test
commit
030b48fb2cf045dead8ee2c5ead560930044c029 upstream.
The test runner run_cmt_test() in resctrl_tests.c checks for CMT
feature and does not run cmt_resctrl_val() if CMT is not supported.
Then cmt_resctrl_val() also check is CMT is supported.
Remove the duplicated feature check for CMT from cmt_resctrl_val().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso [Tue, 21 Nov 2023 12:14:22 +0000 (13:14 +0100)]
netfilter: nf_tables: split async and sync catchall in two functions
[ Upstream commit
8837ba3e58ea1e3d09ae36db80b1e80853aada95 ]
list_for_each_entry_safe() does not work for the async case which runs
under RCU, therefore, split GC logic for catchall in two functions
instead, one for each of the sync and async GC variants.
The catchall sync GC variant never sees a _DEAD bit set on ever, thus,
this handling is removed in such case, moreover, allocate GC sync batch
via GFP_KERNEL.
Fixes:
93995bf4af2c ("netfilter: nf_tables: remove catchall element in GC sync path")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Tue, 21 Nov 2023 12:14:21 +0000 (13:14 +0100)]
netfilter: nf_tables: remove catchall element in GC sync path
[ Upstream commit
93995bf4af2c5a99e2a87f0cd5ce547d31eb7630 ]
The expired catchall element is not deactivated and removed from GC sync
path. This path holds mutex so just call nft_setelem_data_deactivate()
and nft_setelem_catchall_remove() before queueing the GC work.
Fixes:
4a9e12ea7e70 ("netfilter: nft_set_pipapo: call nft_trans_gc_queue_sync() in catchall GC")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mimi Zohar [Wed, 18 Oct 2023 18:47:02 +0000 (14:47 -0400)]
ima: detect changes to the backing overlay file
commit
b836c4d29f2744200b2af41e14bf50758dddc818 upstream.
Commit
18b44bc5a672 ("ovl: Always reevaluate the file signature for
IMA") forced signature re-evaulation on every file access.
Instead of always re-evaluating the file's integrity, detect a change
to the backing file, by comparing the cached file metadata with the
backing file's metadata. Verifying just the i_version has not changed
is insufficient. In addition save and compare the i_ino and s_dev
as well.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Goldstein [Thu, 5 Oct 2023 11:15:58 +0000 (14:15 +0300)]
ima: annotate iint mutex to avoid lockdep false positive warnings
commit
e044374a8a0a99e46f4e6d6751d3042b6d9cc12e upstream.
It is not clear that IMA should be nested at all, but as long is it
measures files both on overlayfs and on underlying fs, we need to
annotate the iint mutex to avoid lockdep false positives related to
IMA + overlayfs, same as overlayfs annotates the inode mutex.
Reported-and-tested-by: syzbot+b42fe626038981fb7bfa@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 3 Oct 2023 15:29:24 +0000 (17:29 +0200)]
mfd: qcom-spmi-pmic: Fix revid implementation
commit
7b439aaa62fee474a0d84d67a25f4984467e7b95 upstream.
The Qualcomm SPMI PMIC revid implementation is broken in multiple ways.
First, it assumes that just because the sibling base device has been
registered that means that it is also bound to a driver, which may not
be the case (e.g. due to probe deferral or asynchronous probe). This
could trigger a NULL-pointer dereference when attempting to access the
driver data of the unbound device.
Second, it accesses driver data of a sibling device directly and without
any locking, which means that the driver data may be freed while it is
being accessed (e.g. on driver unbind).
Third, it leaks a struct device reference to the sibling device which is
looked up using the spmi_device_from_of() every time a function (child)
device is calling the revid function (e.g. on probe).
Fix this mess by reimplementing the revid lookup so that it is done only
at probe of the PMIC device; the base device fetches the revid info from
the hardware, while any secondary SPMI device fetches the information
from the base device and caches it so that it can be accessed safely
from its children. If the base device has not been probed yet then probe
of a secondary device is deferred.
Fixes:
e9c11c6e3a0e ("mfd: qcom-spmi-pmic: expose the PMIC revid information to clients")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231003152927.15000-3-johan+linaro@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 3 Oct 2023 15:29:23 +0000 (17:29 +0200)]
mfd: qcom-spmi-pmic: Fix reference leaks in revid helper
commit
a0fa44c261e448c531f9adb3a5189a3520f3e316 upstream.
The Qualcomm SPMI PMIC revid implementation is broken in multiple ways.
First, it totally ignores struct device_node reference counting and
leaks references to the parent bus node as well as each child it
iterates over using an open-coded for_each_child_of_node().
Second, it leaks references to each spmi device on the bus that it
iterates over by failing to drop the reference taken by the
spmi_device_from_of() helper.
Fix the struct device_node leaks by reimplementing the lookup using
for_each_child_of_node() and adding the missing reference count
decrements. Fix the sibling struct device leaks by dropping the
unnecessary lookups of devices with the wrong USID.
Note that this still leaves one struct device reference leak in case a
base device is found but it is not the parent of the device used for the
lookup. This will be addressed in a follow-on patch.
Fixes:
e9c11c6e3a0e ("mfd: qcom-spmi-pmic: expose the PMIC revid information to clients")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231003152927.15000-2-johan+linaro@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vignesh Viswanathan [Tue, 5 Sep 2023 09:55:34 +0000 (15:25 +0530)]
arm64: dts: qcom: ipq6018: Fix tcsr_mutex register size
commit
72fc3d58b87b0d622039c6299b89024fbb7b420f upstream.
IPQ6018's TCSR Mutex HW lock register has 32 locks of size 4KB each.
Total size of the TCSR Mutex registers is 128KB.
Fix size of the tcsr_mutex hwlock register to 0x20000.
Changes in v2:
- Drop change to remove qcom,ipq6018-tcsr-mutex compatible string
- Added Fixes and stable tags
Cc: stable@vger.kernel.org
Fixes:
5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905095535.1263113-2-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Khoruzhick [Wed, 27 Sep 2023 19:50:02 +0000 (12:50 -0700)]
ACPI: FPDT: properly handle invalid FPDT subtables
commit
a83c68a3bf7c418c9a46693c63c638852b0c1f4e upstream.
Buggy BIOSes may have invalid FPDT subtables, e.g. on my hardware:
S3PT subtable:
7F20FE30: 53 33 50 54 24 00 00 00-00 00 00 00 00 00 18 01 *S3PT$...........*
7F20FE40: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 *................*
7F20FE50: 00 00 00 00
Here the first record has zero length.
FBPT subtable:
7F20FE50: 46 42 50 54-3C 00 00 00 46 42 50 54 *....FBPT<...FBPT*
7F20FE60: 02 00 30 02 00 00 00 00-00 00 00 00 00 00 00 00 *..0.............*
7F20FE70: 2A A6 BC 6E 0B 00 00 00-1A 44 41 70 0B 00 00 00 **..n.....DAp....*
7F20FE80: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 *................*
And here FBPT table has FBPT signature repeated instead of the first
record.
Current code will be looping indefinitely due to zero length records, so
break out of the loop if record length is zero.
While we are here, add proper handling for fpdt_process_subtable()
failures.
Fixes:
d1eb86e59be0 ("ACPI: tables: introduce support for FPDT table")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[ rjw: Comment edit, added empty code lines ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kathiravan Thirumoorthy [Mon, 25 Sep 2023 08:29:22 +0000 (13:59 +0530)]
firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit
commit
3337a6fea25370d3d244ec6bb38c71ee86fcf837 upstream.
Per the "SMC calling convention specification", the 64-bit calling
convention can only be used when the client is 64-bit. Whereas the
32-bit calling convention can be used by either a 32-bit or a 64-bit
client.
Currently during SCM probe, irrespective of the client, 64-bit calling
convention is made, which is incorrect and may lead to the undefined
behaviour when the client is 32-bit. Let's fix it.
Cc: stable@vger.kernel.org
Fixes:
9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions")
Reviewed-By: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230925-scm-v3-1-8790dff6a749@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vignesh Viswanathan [Mon, 4 Sep 2023 17:25:14 +0000 (22:55 +0530)]
arm64: dts: qcom: ipq8074: Fix hwlock index for SMEM
commit
8a781d04e580705d36f7db07f5c80e748100b69d upstream.
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.
Fix the SMEM hwlock index to 3 for IPQ8074.
Cc: stable@vger.kernel.org
Fixes:
42124b947e8e ("arm64: dts: qcom: ipq8074: add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-4-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Mon, 18 Sep 2023 18:15:33 +0000 (14:15 -0400)]
btrfs: don't arbitrarily slow down delalloc if we're committing
commit
11aeb97b45ad2e0040cbb2a589bc403152526345 upstream.
We have a random schedule_timeout() if the current transaction is
committing, which seems to be a holdover from the original delalloc
reservation code.
Remove this, we have the proper flushing stuff, we shouldn't be hoping
for random timing things to make everything work. This just induces
latency for no reason.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Catalin Marinas [Sat, 30 Sep 2023 17:46:56 +0000 (17:46 +0000)]
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
commit
5f98fd034ca6fd1ab8c91a3488968a0e9caaabf6 upstream.
Since the actual slab freeing is deferred when calling kvfree_rcu(), so
is the kmemleak_free() callback informing kmemleak of the object
deletion. From the perspective of the kvfree_rcu() caller, the object is
freed and it may remove any references to it. Since kmemleak does not
scan RCU internal data storing the pointer, it will report such objects
as leaks during the grace period.
Tell kmemleak to ignore such objects on the kvfree_call_rcu() path. Note
that the tiny RCU implementation does not have such issue since the
objects can be tracked from the rcu_ctrlblk structure.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://lore.kernel.org/all/
F903A825-F05F-4B77-A2B5-
7356282FBA2C@apple.com/
Cc: <stable@vger.kernel.org>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Geffon [Fri, 22 Sep 2023 16:07:04 +0000 (12:07 -0400)]
PM: hibernate: Clean up sync_read handling in snapshot_write_next()
commit
d08970df1980476f27936e24d452550f3e9e92e1 upstream.
In snapshot_write_next(), sync_read is set and unset in three different
spots unnecessiarly. As a result there is a subtle bug where the first
page after the meta data has been loaded unconditionally sets sync_read
to 0. If this first PFN was actually a highmem page, then the returned
buffer will be the global "buffer," and the page needs to be loaded
synchronously.
That is, I'm not sure we can always assume the following to be safe:
handle->buffer = get_buffer(&orig_bm, &ca);
handle->sync_read = 0;
Because get_buffer() can call get_highmem_page_buffer() which can
return 'buffer'.
The easiest way to address this is just set sync_read before
snapshot_write_next() returns if handle->buffer == buffer.
Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes:
8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Geffon [Thu, 21 Sep 2023 17:00:45 +0000 (13:00 -0400)]
PM: hibernate: Use __get_safe_page() rather than touching the list
commit
f0c7183008b41e92fa676406d87f18773724b48b upstream.
We found at least one situation where the safe pages list was empty and
get_buffer() would gladly try to use a NULL pointer.
Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes:
8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vignesh Viswanathan [Mon, 4 Sep 2023 17:25:13 +0000 (22:55 +0530)]
arm64: dts: qcom: ipq6018: Fix hwlock index for SMEM
commit
95d97b111e1e184b0c8656137033ed64f2cf21e4 upstream.
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.
Fix the SMEM hwlock index to 3 for IPQ6018.
Cc: stable@vger.kernel.org
Fixes:
5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-3-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Fernandes (Google) [Tue, 5 Sep 2023 00:02:11 +0000 (00:02 +0000)]
rcu/tree: Defer setting of jiffies during stall reset
commit
b96e7a5fa0ba9cda32888e04f8f4bac42d49a7f8 upstream.
There are instances where rcu_cpu_stall_reset() is called when jiffies
did not get a chance to update for a long time. Before jiffies is
updated, the CPU stall detector can go off triggering false-positives
where a just-started grace period appears to be ages old. In the past,
we disabled stall detection in rcu_cpu_stall_reset() however this got
changed [1]. This is resulting in false-positives in KGDB usecase [2].
Fix this by deferring the update of jiffies to the third run of the FQS
loop. This is more robust, as, even if rcu_cpu_stall_reset() is called
just before jiffies is read, we would end up pushing out the jiffies
read by 3 more FQS loops. Meanwhile the CPU stall detection will be
delayed and we will not get any false positives.
[1] https://lore.kernel.org/all/
20210521155624.174524-2-senozhatsky@chromium.org/
[2] https://lore.kernel.org/all/
20230814020045.51950-2-chenhuacai@loongson.cn/
Tested with rcutorture.cpu_stall option as well to verify stall behavior
with/without patch.
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Closes: https://lore.kernel.org/all/
20230814020045.51950-2-chenhuacai@loongson.cn/
Suggested-by: Paul McKenney <paulmck@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes:
a80be428fbc1 ("rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Tue, 10 Oct 2023 17:23:41 +0000 (13:23 -0400)]
svcrdma: Drop connection after an RDMA Read error
commit
197115ebf358cb440c73e868b2a0a5ef728decc6 upstream.
When an RPC Call message cannot be pulled from the client, that
is a message loss, by definition. Close the connection to trigger
the client to resend.
Cc: <stable@vger.kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Singh [Tue, 17 Oct 2023 08:43:38 +0000 (10:43 +0200)]
wifi: wilc1000: use vmm_table as array in wilc struct
commit
05ac1a198a63ad66bf5ae8b7321407c102d40ef3 upstream.
Enabling KASAN and running some iperf tests raises some memory issues with
vmm_table:
BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4
Write of size 4 at addr
c3a61540 by task wlan0-tx/95
KASAN detects that we are writing data beyond range allocated to vmm_table.
There is indeed a mismatch between the size passed to allocator in
wilc_wlan_init, and the range of possible indexes used later: allocation
size is missing a multiplication by sizeof(u32)
Fixes:
40b717bfcefa ("wifi: wilc1000: fix DMA on stack objects")
Cc: stable@vger.kernel.org
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Sun, 1 Oct 2023 17:02:51 +0000 (19:02 +0200)]
PCI: exynos: Don't discard .remove() callback
commit
83a939f0fdc208ff3639dd3d42ac9b3c35607fd2 upstream.
With CONFIG_PCI_EXYNOS=y and exynos_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.
The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:
WARNING: modpost: drivers/pci/controller/dwc/pci-exynos: section mismatch in reference: exynos_pcie_driver+0x8 (section: .data) -> exynos_pcie_remove (section: .exit.text)
(with ARCH=x86_64 W=1 allmodconfig).
Fixes:
340cba6092c2 ("pci: Add PCIe driver for Samsung Exynos")
Link: https://lore.kernel.org/r/20231001170254.2506508-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Sun, 1 Oct 2023 17:02:52 +0000 (19:02 +0200)]
PCI: kirin: Don't discard .remove() callback
commit
3064ef2e88c1629c1e67a77d7bc20020b35846f2 upstream.
With CONFIG_PCIE_KIRIN=y and kirin_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.
The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:
drivers/pci/controller/dwc/pcie-kirin: section mismatch in reference: kirin_pcie_driver+0x8 (section: .data) -> kirin_pcie_remove (section: .exit.text)
(with ARCH=x86_64 W=1 allmodconfig).
Fixes:
000f60db784b ("PCI: kirin: Add support for a PHY layer")
Link: https://lore.kernel.org/r/20231001170254.2506508-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Wed, 11 Oct 2023 07:46:45 +0000 (09:46 +0200)]
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
commit
8e37372ad0bea4c9b4712d9943f6ae96cff9491f upstream.
aspm_attr_store_common(), which handles sysfs control of ASPM, has the same
problem as
fb097dcd5a28 ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"): disabling L1 adds only ASPM_L1 (but not any of the L1.x
substates) to the "aspm_disable" mask.
Enabling one substate, e.g., L1.1, via sysfs removes ASPM_L1 from the
disable mask. Since disabling L1 via sysfs doesn't add any of the
substates to the disable mask, enabling L1.1 actually enables *all* the
substates.
In this scenario:
- Write 0 to "l1_aspm" to disable L1
- Write 1 to "l1_1_aspm" to enable L1.1
the intention is to disable L1 and all L1.x substates, then enable just
L1.1, but in fact, *all* L1.x substates are enabled.
Fix this by explicitly disabling all the L1.x substates when disabling L1.
Fixes:
72ea91afbfb0 ("PCI/ASPM: Add sysfs attributes for controlling ASPM link states")
Link: https://lore.kernel.org/r/6ba7dd79-9cfe-4ed0-a002-d99cb842f361@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bean Huo [Mon, 30 Oct 2023 22:48:09 +0000 (23:48 +0100)]
mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
commit
ed9009ad300c0f15a3ecfe9613547b1962bde02c upstream.
Micron MTFC4GACAJCN eMMC supports cache but requires that flush cache
operation be allowed only after a write has occurred. Otherwise, the
cache flush command or subsequent commands will time out.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231030224809.59245-1-beanhuo@iokpp.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nitin Yadav [Thu, 26 Oct 2023 06:14:58 +0000 (11:44 +0530)]
mmc: sdhci_am654: fix start loop index for TAP value parsing
commit
71956d0cb56c1e5f9feeb4819db87a076418e930 upstream.
ti,otap-del-sel-legacy/ti,itap-del-sel-legacy passed from DT
are currently ignored for all SD/MMC and eMMC modes. Fix this
by making start loop index to MMC_TIMING_LEGACY.
Fixes:
8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026061458.1116276-1-n-yadav@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 2 Nov 2023 07:51:06 +0000 (10:51 +0300)]
mmc: vub300: fix an error code
commit
b44f9da81783fda72632ef9b0d05ea3f3ca447a5 upstream.
This error path should return -EINVAL instead of success.
Fixes:
88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/0769d30c-ad80-421b-bf5d-7d6f5d85604e@moroto.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Sun, 5 Nov 2023 03:46:24 +0000 (12:46 +0900)]
ksmbd: fix slab out of bounds write in smb_inherit_dacl()
commit
eebff19acaa35820cb09ce2ccb3d21bee2156ffb upstream.
slab out-of-bounds write is caused by that offsets is bigger than pntsd
allocation size. This patch add the check to validate 3 offsets using
allocation size.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22271
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 7 Nov 2023 12:04:31 +0000 (21:04 +0900)]
ksmbd: handle malformed smb1 message
commit
5a5409d90bd05f87fe5623a749ccfbf3f7c7d400 upstream.
If set_smb1_rsp_status() is not implemented, It will cause NULL pointer
dereferece error when client send malformed smb1 message.
This patch add set_smb1_rsp_status() to ignore malformed smb1 message.
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kathiravan Thirumoorthy [Thu, 14 Sep 2023 06:59:52 +0000 (12:29 +0530)]
clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
commit
99cd4935cb972d0aafb16838bb2aeadbcaf196ce upstream.
GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
on the request from dependent clocks. Doing so will result in the
unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
clocks.
Cc: stable@vger.kernel.org
Fixes:
d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-2-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kathiravan Thirumoorthy [Thu, 14 Sep 2023 06:59:51 +0000 (12:29 +0530)]
clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
commit
e641a070137dd959932c7c222e000d9d941167a2 upstream.
GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
on the request from dependent clocks. Doing so will result in the
unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
clocks.
Cc: stable@vger.kernel.org
Fixes:
b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-1-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Tue, 24 Oct 2023 03:30:52 +0000 (21:30 -0600)]
clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data
commit
d761bb01c85b22d5b44abe283eb89019693f6595 upstream.
`struct clk_hw_onecell_data` is a flexible structure, which means that
it contains flexible-array member at the bottom, in this case array
`hws`:
include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381 unsigned int num;
1382 struct clk_hw *hws[] __counted_by(num);
1383 };
This could potentially lead to an overwrite of the objects following
`clk_data` in `struct stratix10_clock_data`, in this case
`void __iomem *base;` at run-time:
drivers/clk/socfpga/stratix10-clk.h:
9 struct stratix10_clock_data {
10 struct clk_hw_onecell_data clk_data;
11 void __iomem *base;
12 };
There are currently three different places where memory is allocated for
`struct stratix10_clock_data`, including the flex-array `hws` in
`struct clk_hw_onecell_data`:
drivers/clk/socfpga/clk-agilex.c:
469 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
470 num_clks), GFP_KERNEL);
drivers/clk/socfpga/clk-agilex.c:
509 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
510 num_clks), GFP_KERNEL);
drivers/clk/socfpga/clk-s10.c:
400 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
401 num_clks), GFP_KERNEL);
I'll use just one of them to describe the issue. See below.
Notice that a total of 440 bytes are allocated for flexible-array member
`hws` at line 469:
include/dt-bindings/clock/agilex-clock.h:
70 #define AGILEX_NUM_CLKS 55
drivers/clk/socfpga/clk-agilex.c:
459 struct stratix10_clock_data *clk_data;
460 void __iomem *base;
...
466
467 num_clks = AGILEX_NUM_CLKS;
468
469 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
470 num_clks), GFP_KERNEL);
`struct_size(clk_data, clk_data.hws, num_clks)` above translates to
sizeof(struct stratix10_clock_data) + sizeof(struct clk_hw *) * 55 ==
16 + 8 * 55 == 16 + 440
^^^
|
allocated bytes for flex-array `hws`
474 for (i = 0; i < num_clks; i++)
475 clk_data->clk_data.hws[i] = ERR_PTR(-ENOENT);
476
477 clk_data->base = base;
and then some data is written into both `hws` and `base` objects.
Fix this by placing the declaration of object `clk_data` at the end of
`struct stratix10_clock_data`. Also, add a comment to make it clear
that this object must always be last in the structure.
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
Fixes:
ba7e258425ac ("clk: socfpga: Convert to s10/agilex/n5x to use clk_hw")
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/1da736106d8e0806aeafa6e471a13ced490eae22.1698117815.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Tue, 17 Oct 2023 20:19:53 +0000 (22:19 +0200)]
parisc/power: Add power soft-off when running on qemu
commit
d0c219472980d15f5cbc5c8aec736848bda3f235 upstream.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Sun, 22 Oct 2023 09:48:11 +0000 (11:48 +0200)]
parisc/pdc: Add width field to struct pdc_model
commit
6240553b52c475d9fc9674de0521b77e692f3764 upstream.
PDC2.0 specifies the additional PSW-bit field.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Wed, 25 Oct 2023 17:21:28 +0000 (10:21 -0700)]
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
commit
146a15b873353f8ac28dc281c139ff611a3c4848 upstream.
Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly
byte-swap NOP when compiling for big-endian, and the resulting series of
bytes happened to match the encoding of FNMADD S21, S30, S0, S0.
This went unnoticed until commit:
34f66c4c4d5518c1 ("arm64: Use a positive cpucap for FP/SIMD")
Prior to that commit, the kernel would always enable the use of FPSIMD
early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of
FNMADD within the kernel was not detected, but could result in the
corruption of user or kernel FPSIMD state.
After that commit, the instructions happen to trap during boot prior to
FPSIMD being detected and enabled, e.g.
| Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
| Hardware name: linux,dummy-virt (DT)
| pstate:
400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __pi_strcmp+0x1c/0x150
| lr : populate_properties+0xe4/0x254
| sp :
ffffd014173d3ad0
| x29:
ffffd014173d3af0 x28:
fffffbfffddffcb8 x27:
0000000000000000
| x26:
0000000000000058 x25:
fffffbfffddfe054 x24:
0000000000000008
| x23:
fffffbfffddfe000 x22:
fffffbfffddfe000 x21:
fffffbfffddfe044
| x20:
ffffd014173d3b70 x19:
0000000000000001 x18:
0000000000000005
| x17:
0000000000000010 x16:
0000000000000000 x15:
00000000413e7000
| x14:
0000000000000000 x13:
0000000000001bcc x12:
0000000000000000
| x11:
00000000d00dfeed x10:
ffffd414193f2cd0 x9 :
0000000000000000
| x8 :
0101010101010101 x7 :
ffffffffffffffc0 x6 :
0000000000000000
| x5 :
0000000000000000 x4 :
0101010101010101 x3 :
000000000000002a
| x2 :
0000000000000001 x1 :
ffffd014171f2988 x0 :
fffffbfffddffcb8
| Kernel panic - not syncing: Unhandled exception
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0xec/0x108
| show_stack+0x18/0x2c
| dump_stack_lvl+0x50/0x68
| dump_stack+0x18/0x24
| panic+0x13c/0x340
| el1t_64_irq_handler+0x0/0x1c
| el1_abort+0x0/0x5c
| el1h_64_sync+0x64/0x68
| __pi_strcmp+0x1c/0x150
| unflatten_dt_nodes+0x1e8/0x2d8
| __unflatten_device_tree+0x5c/0x15c
| unflatten_device_tree+0x38/0x50
| setup_arch+0x164/0x1e0
| start_kernel+0x64/0x38c
| __primary_switched+0xbc/0xc4
Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is
either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked
commit.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1948
Link: https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231025-disable-arm64-be-ias-b4-llvm-15-v1-1-b25263ed8b23@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Sun, 1 Oct 2023 17:02:54 +0000 (19:02 +0200)]
PCI: keystone: Don't discard .probe() callback
commit
7994db905c0fd692cf04c527585f08a91b560144 upstream.
The __init annotation makes the ks_pcie_probe() function disappear after
booting completes. However a device can also be bound later. In that case,
we try to call ks_pcie_probe(), but the backing memory is likely already
overwritten.
The right thing to do is do always have the probe callback available. Note
that the (wrong) __refdata annotation prevented this issue to be noticed by
modpost.
Fixes:
0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Sun, 1 Oct 2023 17:02:53 +0000 (19:02 +0200)]
PCI: keystone: Don't discard .remove() callback
commit
200bddbb3f5202bbce96444fdc416305de14f547 upstream.
With CONFIG_PCIE_KEYSTONE=y and ks_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.
The right thing to do is do always have the remove callback available.
Note that this driver cannot be compiled as a module, so ks_pcie_remove()
was always discarded before this change and modpost couldn't warn about
this issue. Furthermore the __ref annotation also prevents a warning.
Fixes:
0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jarkko Sakkinen [Tue, 10 Oct 2023 23:08:25 +0000 (02:08 +0300)]
KEYS: trusted: Rollback init_trusted() consistently
commit
31de287345f41bbfaec36a5c8cbdba035cf76442 upstream.
Do bind neither static calls nor trusted_key_exit() before a successful
init, in order to maintain a consistent state. In addition, depart the
init_trusted() in the case of a real error (i.e. getting back something
else than -ENODEV).
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/linux-integrity/CAHk-=whOPoLaWM8S8GgoOPT7a2+nMH5h3TLKtn=R_3w4R1_Uvg@mail.gmail.com/
Cc: stable@vger.kernel.org # v5.13+
Fixes:
5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sumit Garg [Tue, 22 Aug 2023 11:29:33 +0000 (16:59 +0530)]
KEYS: trusted: tee: Refactor register SHM usage
commit
c745cd1718b7825d69315fe7127e2e289e617598 upstream.
The OP-TEE driver using the old SMC based ABI permits overlapping shared
buffers, but with the new FF-A based ABI each physical page may only
be registered once.
As the key and blob buffer are allocated adjancently, there is no need
for redundant register shared memory invocation. Also, it is incompatibile
with FF-A based ABI limitation. So refactor register shared memory
implementation to use only single invocation to register both key and blob
buffers.
[jarkko: Added cc to stable.]
Cc: stable@vger.kernel.org # v5.16+
Fixes:
4615e5a34b95 ("optee: add FF-A support")
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herve Codina [Tue, 24 Oct 2023 15:03:35 +0000 (17:03 +0200)]
genirq/generic_chip: Make irq_remove_generic_chip() irqdomain aware
commit
5e7afb2eb7b2a7c81e9f608cbdf74a07606fd1b5 upstream.
irq_remove_generic_chip() calculates the Linux interrupt number for removing the
handler and interrupt chip based on gc::irq_base as a linear function of
the bit positions of set bits in the @msk argument.
When the generic chip is present in an irq domain, i.e. created with a call
to irq_alloc_domain_generic_chips(), gc::irq_base contains not the base
Linux interrupt number. It contains the base hardware interrupt for this
chip. It is set to 0 for the first chip in the domain, 0 + N for the next
chip, where $N is the number of hardware interrupts per chip.
That means the Linux interrupt number cannot be calculated based on
gc::irq_base for irqdomain based chips without a domain map lookup, which
is currently missing.
Rework the code to take the irqdomain case into account and calculate the
Linux interrupt number by a irqdomain lookup of the domain specific
hardware interrupt number.
[ tglx: Massage changelog. Reshuffle the logic and add a proper comment. ]
Fixes:
cfefd21e693d ("genirq: Add chip suspend and resume callbacks")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231024150335.322282-1-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rong Chen [Thu, 26 Oct 2023 07:31:56 +0000 (15:31 +0800)]
mmc: meson-gx: Remove setting of CMD_CFG_ERROR
commit
57925e16c9f7d18012bcf45bfa658f92c087981a upstream.
For the t7 and older SoC families, the CMD_CFG_ERROR has no effect.
Starting from SoC family C3, setting this bit without SG LINK data
address will cause the controller to generate an IRQ and stop working.
To fix it, don't set the bit CMD_CFG_ERROR anymore.
Fixes:
18f92bc02f17 ("mmc: meson-gx: make sure the descriptor is stopped on errors")
Signed-off-by: Rong Chen <rong.chen@amlogic.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026073156.2868310-1-rong.chen@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 19 Oct 2023 15:53:42 +0000 (17:53 +0200)]
wifi: ath11k: fix gtk offload status event locking
commit
1dea3c0720a146bd7193969f2847ccfed5be2221 upstream.
The ath11k active pdevs are protected by RCU but the gtk offload status
event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not
marked as a read-side critical section.
Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.
Compile tested only.
Fixes:
a16d9b50cfba ("ath11k: support GTK rekey offload")
Cc: stable@vger.kernel.org # 5.18
Cc: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019155342.31631-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 19 Oct 2023 11:25:21 +0000 (13:25 +0200)]
wifi: ath11k: fix htt pktlog locking
commit
3f77c7d605b29df277d77e9ee75d96e7ad145d2d upstream.
The ath11k active pdevs are protected by RCU but the htt pktlog handling
code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.
Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.
Compile tested only.
Fixes:
d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org # 5.6
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019112521.2071-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 19 Oct 2023 15:31:15 +0000 (17:31 +0200)]
wifi: ath11k: fix dfs radar event locking
commit
3b6c14833165f689cc5928574ebafe52bbce5f1e upstream.
The ath11k active pdevs are protected by RCU but the DFS radar event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.
Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.
Compile tested only.
Fixes:
d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org # 5.6
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019153115.26401-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 19 Oct 2023 15:31:14 +0000 (17:31 +0200)]
wifi: ath11k: fix temperature event locking
commit
1a5352a81b4720ba43d9c899974e3bddf7ce0ce8 upstream.
The ath11k active pdevs are protected by RCU but the temperature event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section as reported by RCU lockdep:
=============================
WARNING: suspicious RCU usage
6.6.0-rc6 #7 Not tainted
-----------------------------
drivers/net/wireless/ath/ath11k/mac.c:638 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
...
Call trace:
...
lockdep_rcu_suspicious+0x16c/0x22c
ath11k_mac_get_ar_by_pdev_id+0x194/0x1b0 [ath11k]
ath11k_wmi_tlv_op_rx+0xa84/0x2c1c [ath11k]
ath11k_htc_rx_completion_handler+0x388/0x510 [ath11k]
Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Fixes:
a41d10348b01 ("ath11k: add thermal sensor device support")
Cc: stable@vger.kernel.org # 5.7
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019153115.26401-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Thu, 26 Oct 2023 15:49:19 +0000 (16:49 +0100)]
regmap: Ensure range selector registers are updated after cache sync
commit
0ec7731655de196bc1e4af99e495b38778109d22 upstream.
When we sync the register cache we do so with the cache bypassed in order
to avoid overhead from writing the synced values back into the cache. If
the regmap has ranges and the selector register for those ranges is in a
register which is cached this has the unfortunate side effect of meaning
that the physical and cached copies of the selector register can be out of
sync after a cache sync. The cache will have whatever the selector was when
the sync started and the hardware will have the selector for the register
that was synced last.
Fix this by rewriting all cached selector registers after every sync,
ensuring that the hardware and cache have the same content. This will
result in extra writes that wouldn't otherwise be needed but is simple
so hopefully robust. We don't read from the hardware since not all
devices have physical read support.
Given that nobody noticed this until now it is likely that we are rarely if
ever hitting this case.
Reported-by: Hector Martin <marcan@marcan.st>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026-regmap-fix-selector-sync-v1-1-633ded82770d@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Werner Sembach [Mon, 16 Oct 2023 16:08:28 +0000 (18:08 +0200)]
ACPI: resource: Do IRQ override on TongFang GMxXGxx
commit
0da9eccde3270b832c059ad618bf66e510c75d33 upstream.
The TongFang GMxXGxx/TUXEDO Stellaris/Pollaris Gen5 needs IRQ overriding
for the keyboard to work.
Adding an entry for this laptop to the override_table makes the internal
keyboard functional.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SeongJae Park [Mon, 6 Nov 2023 23:34:06 +0000 (23:34 +0000)]
mm/damon/sysfs: check error from damon_sysfs_update_target()
commit
b4936b544b08ed44949055b92bd25f77759ebafc upstream.
Patch series "mm/damon/sysfs: fix unhandled return values".
Some of DAMON sysfs interface code is not handling return values from some
functions. As a result, confusing user input handling or NULL-dereference
is possible. Check those properly.
This patch (of 3):
damon_sysfs_update_target() returns error code for failures, but its
caller, damon_sysfs_set_targets() is ignoring that. The update function
seems making no critical change in case of such failures, but the behavior
will look like DAMON sysfs is silently ignoring or only partially
accepting the user input. Fix it.
Link: https://lkml.kernel.org/r/20231106233408.51159-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231106233408.51159-2-sj@kernel.org
Fixes:
19467a950b49 ("mm/damon/sysfs: remove requested targets when online-commit inputs")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SeongJae Park [Thu, 19 Oct 2023 19:49:20 +0000 (19:49 +0000)]
mm/damon: implement a function for max nr_accesses safe calculation
commit
35f5d94187a6a3a8df2cba54beccca1c2379edb8 upstream.
Patch series "avoid divide-by-zero due to max_nr_accesses overflow".
The maximum nr_accesses of given DAMON context can be calculated by
dividing the aggregation interval by the sampling interval. Some logics
in DAMON uses the maximum nr_accesses as a divisor. Hence, the value
shouldn't be zero. Such case is avoided since DAMON avoids setting the
agregation interval as samller than the sampling interval. However, since
nr_accesses is unsigned int while the intervals are unsigned long, the
maximum nr_accesses could be zero while casting.
Avoid the divide-by-zero by implementing a function that handles the
corner case (first patch), and replaces the vulnerable direct max
nr_accesses calculations (remaining patches).
Note that the patches for the replacements are divided for broken commits,
to make backporting on required tres easier. Especially, the last patch
is for a patch that not yet merged into the mainline but in mm tree.
This patch (of 4):
The maximum nr_accesses of given DAMON context can be calculated by
dividing the aggregation interval by the sampling interval. Some logics
in DAMON uses the maximum nr_accesses as a divisor. Hence, the value
shouldn't be zero. Such case is avoided since DAMON avoids setting the
agregation interval as samller than the sampling interval. However, since
nr_accesses is unsigned int while the intervals are unsigned long, the
maximum nr_accesses could be zero while casting. Implement a function
that handles the corner case.
Note that this commit is not fixing the real issue since this is only
introducing the safe function that will replaces the problematic
divisions. The replacements will be made by followup commits, to make
backporting on stable series easier.
Link: https://lkml.kernel.org/r/20231019194924.100347-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231019194924.100347-2-sj@kernel.org
Fixes:
198f0f4c58b9 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SeongJae Park [Thu, 19 Oct 2023 19:49:22 +0000 (19:49 +0000)]
mm/damon/ops-common: avoid divide-by-zero during region hotness calculation
commit
3bafc47d3c4a2fc4d3b382aeb3c087f8fc84d9fd upstream.
When calculating the hotness of each region for the under-quota regions
prioritization, DAMON divides some values by the maximum nr_accesses.
However, due to the type of the related variables, simple division-based
calculation of the divisor can return zero. As a result, divide-by-zero
is possible. Fix it by using damon_max_nr_accesses(), which handles the
case.
Link: https://lkml.kernel.org/r/20231019194924.100347-4-sj@kernel.org
Fixes:
198f0f4c58b9 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SeongJae Park [Thu, 19 Oct 2023 19:49:23 +0000 (19:49 +0000)]
mm/damon/lru_sort: avoid divide-by-zero in hot threshold calculation
commit
44063f125af4bb4efd1d500d8091fa33a98af325 upstream.
When calculating the hotness threshold for lru_prio scheme of
DAMON_LRU_SORT, the module divides some values by the maximum nr_accesses.
However, due to the type of the related variables, simple division-based
calculation of the divisor can return zero. As a result, divide-by-zero
is possible. Fix it by using damon_max_nr_accesses(), which handles the
case.
Link: https://lkml.kernel.org/r/20231019194924.100347-5-sj@kernel.org
Fixes:
40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krister Johansen [Fri, 27 Oct 2023 21:46:53 +0000 (14:46 -0700)]
watchdog: move softlockup_panic back to early_param
commit
8b793bcda61f6c3ed4f5b2ded7530ef6749580cb upstream.
Setting softlockup_panic from do_sysctl_args() causes it to take effect
later in boot. The lockup detector is enabled before SMP is brought
online, but do_sysctl_args runs afterwards. If a user wants to set
softlockup_panic on boot and have it trigger should a softlockup occur
during onlining of the non-boot processors, they could do this prior to
commit
f117955a2255 ("kernel/watchdog.c: convert {soft/hard}lockup boot
parameters to sysctl aliases"). However, after this commit the value
of softlockup_panic is set too late to be of help for this type of
problem. Restore the prior behavior.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes:
f117955a2255 ("kernel/watchdog.c: convert {soft/hard}lockup boot parameters to sysctl aliases")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SeongJae Park [Tue, 31 Oct 2023 17:01:31 +0000 (17:01 +0000)]
mm/damon/sysfs: update monitoring target regions for online input commit
commit
9732336006764e2ee61225387e3c70eae9139035 upstream.
When user input is committed online, DAMON sysfs interface is ignoring the
user input for the monitoring target regions. Such request is valid and
useful for fixed monitoring target regions-based monitoring ops like
'paddr' or 'fvaddr'.
Update the region boundaries as user specified, too. Note that the
monitoring results of the regions that overlap between the latest
monitoring target regions and the new target regions are preserved.
Treat empty monitoring target regions user request as a request to just
make no change to the monitoring target regions. Otherwise, users should
set the monitoring target regions same to current one for every online
input commit, and it could be challenging for dynamic monitoring target
regions update DAMON ops like 'vaddr'. If the user really need to remove
all monitoring target regions, they can simply remove the target and then
create the target again with empty target regions.
Link: https://lkml.kernel.org/r/20231031170131.46972-1-sj@kernel.org
Fixes:
da87878010e5 ("mm/damon/sysfs: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SeongJae Park [Sun, 22 Oct 2023 21:07:33 +0000 (21:07 +0000)]
mm/damon/sysfs: remove requested targets when online-commit inputs
commit
19467a950b49432a84bf6dbadbbb17bdf89418b7 upstream.
damon_sysfs_set_targets(), which updates the targets of the context for
online commitment, do not remove targets that removed from the
corresponding sysfs files. As a result, more than intended targets of the
context can exist and hence consume memory and monitoring CPU resource
more than expected.
Fix it by removing all targets of the context and fill up again using the
user input. This could cause unnecessary memory dealloc and realloc
operations, but this is not a hot code path. Also, note that damon_target
is stateless, and hence no data is lost.
[sj@kernel.org: fix unnecessary monitoring results removal]
Link: https://lkml.kernel.org/r/20231028213353.45397-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231022210735.46409-2-sj@kernel.org
Fixes:
da87878010e5 ("mm/damon/sysfs: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: <stable@vger.kernel.org> [5.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Mon, 18 Sep 2023 12:48:01 +0000 (14:48 +0200)]
PCI/sysfs: Protect driver's D3cold preference from user space
commit
70b70a4307cccebe91388337b1c85735ce4de6ff upstream.
struct pci_dev contains two flags which govern whether the device may
suspend to D3cold:
* no_d3cold provides an opt-out for drivers (e.g. if a device is known
to not wake from D3cold)
* d3cold_allowed provides an opt-out for user space (default is true,
user space may set to false)
Since commit
9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend"),
the user space setting overwrites the driver setting. Essentially user
space is trusted to know better than the driver whether D3cold is
working.
That feels unsafe and wrong. Assume that the change was introduced
inadvertently and do not overwrite no_d3cold when d3cold_allowed is
modified. Instead, consider d3cold_allowed in addition to no_d3cold
when choosing a suspend state for the device.
That way, user space may opt out of D3cold if the driver hasn't, but it
may no longer force an opt in if the driver has opted out.
Fixes:
9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend")
Link: https://lore.kernel.org/r/b8a7f4af2b73f6b506ad8ddee59d747cbf834606.1695025365.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Woodhouse [Fri, 20 Oct 2023 16:15:27 +0000 (17:15 +0100)]
hvc/xen: fix event channel handling for secondary consoles
commit
ef5dd8ec88ac11e8e353164407d55b73c988b369 upstream.
The xencons_connect_backend() function allocates a local interdomain
event channel with xenbus_alloc_evtchn(), then calls
bind_interdomain_evtchn_to_irq_lateeoi() to bind to that port# on the
*remote* domain.
That doesn't work very well:
(qemu) device_add xen-console,id=con1,chardev=pty0
[ 44.323872] xenconsole console-1: 2 xenbus_dev_probe on device/console/1
[ 44.323995] xenconsole: probe of console-1 failed with error -2
Fix it to use bind_evtchn_to_irq_lateeoi(), which does the right thing
by just binding that *local* event channel to an irq. The backend will
do the interdomain binding.
This didn't affect the primary console because the setup for that is
special — the toolstack allocates the guest event channel and the guest
discovers it with HVMOP_get_param.
Fixes:
fe415186b43d ("xen/console: harden hvc_xen against event channel storms")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-2-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Woodhouse [Fri, 20 Oct 2023 16:15:28 +0000 (17:15 +0100)]
hvc/xen: fix error path in xen_hvc_init() to always register frontend driver
commit
2704c9a5593f4a47620c12dad78838ca62b52f48 upstream.
The xen_hvc_init() function should always register the frontend driver,
even when there's no primary console — as there may be secondary consoles.
(Qemu can always add secondary consoles, but only the toolstack can add
the primary because it's special.)
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-3-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Woodhouse [Fri, 20 Oct 2023 16:15:29 +0000 (17:15 +0100)]
hvc/xen: fix console unplug
commit
a30badfd7c13fc8763a9e10c5a12ba7f81515a55 upstream.
On unplug of a Xen console, xencons_disconnect_backend() unconditionally
calls free_irq() via unbind_from_irqhandler(), causing a warning of
freeing an already-free IRQ:
(qemu) device_del con1
[ 32.050919] ------------[ cut here ]------------
[ 32.050942] Trying to free already-free IRQ 33
[ 32.050990] WARNING: CPU: 0 PID: 51 at kernel/irq/manage.c:1895 __free_irq+0x1d4/0x330
It should be using evtchn_put() to tear down the event channel binding,
and let the Linux IRQ side of it be handled by notifier_del_irq() through
the HVC code.
On which topic... xencons_disconnect_backend() should call hvc_remove()
*first*, rather than tearing down the event channel and grant mapping
while they are in use. And then the IRQ is guaranteed to be freed by
the time it's torn down by evtchn_put().
Since evtchn_put() also closes the actual event channel, avoid calling
xenbus_free_evtchn() except in the failure path where the IRQ was not
successfully set up.
However, calling hvc_remove() at the start of xencons_disconnect_backend()
still isn't early enough. An unplug request is indicated by the backend
setting its state to XenbusStateClosing, which triggers a notification
to xencons_backend_changed(), which... does nothing except set its own
frontend state directly to XenbusStateClosed without *actually* tearing
down the HVC device or, you know, making sure it isn't actively in use.
So the backend sees the guest frontend set its state to XenbusStateClosed
and stops servicing the interrupt... and the guest spins for ever in the
domU_write_console() function waiting for the ring to drain.
Fix that one by calling hvc_remove() from xencons_backend_changed() before
signalling to the backend that it's OK to proceed with the removal.
Tested with 'dd if=/dev/zero of=/dev/hvc1' while telling Qemu to remove
the console device.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-4-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Krasavin [Sat, 14 Oct 2023 11:39:26 +0000 (11:39 +0000)]
tty: serial: meson: fix hard LOCKUP on crtscts mode
commit
2a1d728f20edeee7f26dc307ed9df4e0d23947ab upstream.
There might be hard lockup if we set crtscts mode on port without RTS/CTS configured:
# stty -F /dev/ttyAML6 crtscts; echo 1 > /dev/ttyAML6; echo 2 > /dev/ttyAML6
[ 95.890386] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 95.890857] rcu: 3-...0: (201 ticks this GP) idle=e33c/1/0x4000000000000000 softirq=5844/5846 fqs=4984
[ 95.900212] rcu: (detected by 2, t=21016 jiffies, g=7753, q=296 ncpus=4)
[ 95.906972] Task dump for CPU 3:
[ 95.910178] task:bash state:R running task stack:0 pid:205 ppid:1 flags:0x00000202
[ 95.920059] Call trace:
[ 95.922485] __switch_to+0xe4/0x168
[ 95.925951] 0xffffff8003477508
[ 95.974379] watchdog: Watchdog detected hard LOCKUP on cpu 3
[ 95.974424] Modules linked in: 88x2cs(O) rtc_meson_vrtc
Possible solution would be to not allow to setup crtscts on such port.
Tested on S905X3 based board.
Fixes:
ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Krasavin <pkrasavin@imaqliq.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Muhammad Usama Anjum [Mon, 9 Oct 2023 16:20:20 +0000 (21:20 +0500)]
tty/sysrq: replace smp_processor_id() with get_cpu()
commit
dd976a97d15b47656991e185a94ef42a0fa5cfd4 upstream.
The smp_processor_id() shouldn't be called from preemptible code.
Instead use get_cpu() and put_cpu() which disables preemption in
addition to getting the processor id. Enable preemption back after
calling schedule_work() to make sure that the work gets scheduled on all
cores other than the current core. We want to avoid a scenario where
current core's stack trace is printed multiple times and one core's
stack trace isn't printed because of scheduling of current task.
This fixes the following bug:
[ 119.143590] sysrq: Show backtrace of all active CPUs
[ 119.143902] BUG: using smp_processor_id() in preemptible [
00000000] code: bash/873
[ 119.144586] caller is debug_smp_processor_id+0x20/0x30
[ 119.144827] CPU: 6 PID: 873 Comm: bash Not tainted 5.10.124-dirty #3
[ 119.144861] Hardware name: QEMU QEMU Virtual Machine, BIOS 2023.05-1 07/22/2023
[ 119.145053] Call trace:
[ 119.145093] dump_backtrace+0x0/0x1a0
[ 119.145122] show_stack+0x18/0x70
[ 119.145141] dump_stack+0xc4/0x11c
[ 119.145159] check_preemption_disabled+0x100/0x110
[ 119.145175] debug_smp_processor_id+0x20/0x30
[ 119.145195] sysrq_handle_showallcpus+0x20/0xc0
[ 119.145211] __handle_sysrq+0x8c/0x1a0
[ 119.145227] write_sysrq_trigger+0x94/0x12c
[ 119.145247] proc_reg_write+0xa8/0xe4
[ 119.145266] vfs_write+0xec/0x280
[ 119.145282] ksys_write+0x6c/0x100
[ 119.145298] __arm64_sys_write+0x20/0x30
[ 119.145315] el0_svc_common.constprop.0+0x78/0x1e4
[ 119.145332] do_el0_svc+0x24/0x8c
[ 119.145348] el0_svc+0x10/0x20
[ 119.145364] el0_sync_handler+0x134/0x140
[ 119.145381] el0_sync+0x180/0x1c0
Cc: jirislaby@kernel.org
Cc: stable@vger.kernel.org
Fixes:
47cab6a722d4 ("debug lockups: Improve lockup detection, fix generic arch fallback")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20231009162021.3607632-1-usama.anjum@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krister Johansen [Fri, 27 Oct 2023 21:46:40 +0000 (14:46 -0700)]
proc: sysctl: prevent aliased sysctls from getting passed to init
commit
8001f49394e353f035306a45bcf504f06fca6355 upstream.
The code that checks for unknown boot options is unaware of the sysctl
alias facility, which maps bootparams to sysctl values. If a user sets
an old value that has a valid alias, a message about an invalid
parameter will be printed during boot, and the parameter will get passed
to init. Fix by checking for the existence of aliased parameters in the
unknown boot parameter code. If an alias exists, don't return an error
or pass the value to init.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes:
0a477e1ae21b ("kernel/sysctl: support handling command line aliases")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Moore [Tue, 14 Nov 2023 22:25:48 +0000 (17:25 -0500)]
audit: don't WARN_ON_ONCE(!current->mm) in audit_exe_compare()
commit
969d90ec212bae4b45bf9d21d7daa30aa6cf055e upstream.
eBPF can end up calling into the audit code from some odd places, and
some of these places don't have @current set properly so we end up
tripping the `WARN_ON_ONCE(!current->mm)` near the top of
`audit_exe_compare()`. While the basic `!current->mm` check is good,
the `WARN_ON_ONCE()` results in some scary console messages so let's
drop that and just do the regular `!current->mm` check to avoid
problems.
Cc: <stable@vger.kernel.org>
Fixes:
47846d51348d ("audit: don't take task_lock() in audit_exe_compare() code path")
Reported-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Moore [Mon, 9 Oct 2023 17:18:49 +0000 (13:18 -0400)]
audit: don't take task_lock() in audit_exe_compare() code path
commit
47846d51348dd62e5231a83be040981b17c955fa upstream.
The get_task_exe_file() function locks the given task with task_lock()
which when used inside audit_exe_compare() can cause deadlocks on
systems that generate audit records when the task_lock() is held. We
resolve this problem with two changes: ignoring those cases where the
task being audited is not the current task, and changing our approach
to obtaining the executable file struct to not require task_lock().
With the intent of the audit exe filter being to filter on audit events
generated by processes started by the specified executable, it makes
sense that we would only want to use the exe filter on audit records
associated with the currently executing process, e.g. @current. If
we are asked to filter records using a non-@current task_struct we can
safely ignore the exe filter without negatively impacting the admin's
expectations for the exe filter.
Knowing that we only have to worry about filtering the currently
executing task in audit_exe_compare() we can do away with the
task_lock() and call get_mm_exe_file() with @current->mm directly.
Cc: <stable@vger.kernel.org>
Fixes:
5efc244346f9 ("audit: fix exe_file access in audit_exe_compare")
Reported-by: Andreas Steinmetz <anstein99@googlemail.com>
Reviewed-by: John Johansen <john.johanse@canonical.com>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tao Su [Thu, 14 Sep 2023 05:55:04 +0000 (13:55 +0800)]
KVM: x86: Clear bit12 of ICR after APIC-write VM-exit
commit
629d3698f6958ee6f8131ea324af794f973b12ac upstream.
When IPI virtualization is enabled, a WARN is triggered if bit12 of ICR
MSR is set after APIC-write VM-exit. The reason is kvm_apic_send_ipi()
thinks the APIC_ICR_BUSY bit should be cleared because KVM has no delay,
but kvm_apic_write_nodecode() doesn't clear the APIC_ICR_BUSY bit.
Under the x2APIC section, regarding ICR, the SDM says:
It remains readable only to aid in debugging; however, software should
not assume the value returned by reading the ICR is the last written
value.
I.e. the guest is allowed to set bit 12. However, the SDM also gives KVM
free reign to do whatever it wants with the bit, so long as KVM's behavior
doesn't confuse userspace or break KVM's ABI.
Clear bit 12 so that it reads back as '0'. This approach is safer than
"do nothing" and is consistent with the case where IPI virtualization is
disabled or not supported, i.e.,
handle_fastpath_set_x2apic_icr_irqoff() -> kvm_x2apic_icr_write()
Opportunistically replace the TODO with a comment calling out that eating
the write is likely faster than a conditional branch around the busy bit.
Link: https://lore.kernel.org/all/ZPj6iF0Q7iynn62p@google.com/
Fixes:
5413bcba7ed5 ("KVM: x86: Add support for vICR APIC-write VM-Exits in x2APIC mode")
Cc: stable@vger.kernel.org
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20230914055504.151365-1-tao1.su@linux.intel.com
[sean: tweak changelog, replace TODO with comment, drop local "val"]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej S. Szmigiero [Thu, 19 Oct 2023 16:06:57 +0000 (18:06 +0200)]
KVM: x86: Ignore MSR_AMD64_TW_CFG access
commit
2770d4722036d6bd24bcb78e9cd7f6e572077d03 upstream.
Hyper-V enabled Windows Server 2022 KVM VM cannot be started on Zen1 Ryzen
since it crashes at boot with SYSTEM_THREAD_EXCEPTION_NOT_HANDLED +
STATUS_PRIVILEGED_INSTRUCTION (in other words, because of an unexpected #GP
in the guest kernel).
This is because Windows tries to set bit 8 in MSR_AMD64_TW_CFG and can't
handle receiving a #GP when doing so.
Give this MSR the same treatment that commit
2e32b7190641
("x86, kvm: Add MSR_AMD64_BU_CFG2 to the list of ignored MSRs") gave
MSR_AMD64_BU_CFG2 under justification that this MSR is baremetal-relevant
only.
Although apparently it was then needed for Linux guests, not Windows as in
this case.
With this change, the aforementioned guest setup is able to finish booting
successfully.
This issue can be reproduced either on a Summit Ridge Ryzen (with
just "-cpu host") or on a Naples EPYC (with "-cpu host,stepping=1" since
EPYC is ordinarily stepping 2).
Alternatively, userspace could solve the problem by using MSR filters, but
forcing every userspace to define a filter isn't very friendly and doesn't
add much, if any, value. The only potential hiccup is if one of these
"baremetal-only" MSRs ever requires actual emulation and/or has F/M/S
specific behavior. But if that happens, then KVM can still punt *that*
handling to userspace since userspace MSR filters "win" over KVM's default
handling.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1ce85d9c7c9e9632393816cf19c902e0a3f411f1.1697731406.git.maciej.szmigiero@oracle.com
[sean: call out MSR filtering alternative]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Saenz Julienne [Tue, 17 Oct 2023 15:51:02 +0000 (15:51 +0000)]
KVM: x86: hyper-v: Don't auto-enable stimer on write from user-space
commit
d6800af51c76b6dae20e6023bbdc9b3da3ab5121 upstream.
Don't apply the stimer's counter side effects when modifying its
value from user-space, as this may trigger spurious interrupts.
For example:
- The stimer is configured in auto-enable mode.
- The stimer's count is set and the timer enabled.
- The stimer expires, an interrupt is injected.
- The VM is live migrated.
- The stimer config and count are deserialized, auto-enable is ON, the
stimer is re-enabled.
- The stimer expires right away, and injects an unwarranted interrupt.
Cc: stable@vger.kernel.org
Fixes:
1f4b34f825e8 ("kvm/x86: Hyper-V SynIC timers")
Signed-off-by: Nicolas Saenz Julienne <nsaenz@amazon.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231017155101.40677-1-nsaenz@amazon.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pu Wen [Mon, 14 Aug 2023 08:18:26 +0000 (10:18 +0200)]
x86/cpu/hygon: Fix the CPU topology evaluation for real
commit
ee545b94d39a00c93dc98b1dbcbcf731d2eadeb4 upstream.
Hygon processors with a model ID > 3 have CPUID leaf 0xB correctly
populated and don't need the fixed package ID shift workaround. The fixup
is also incorrect when running in a guest.
Fixes:
e0ceeae708ce ("x86/CPU/hygon: Fix phys_proc_id calculation logic for multi-die processors")
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_594804A808BD93A4EBF50A994F228E3A7F07@qq.com
Link: https://lore.kernel.org/r/20230814085112.089607918@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roxana Nicolescu [Fri, 15 Sep 2023 10:23:25 +0000 (12:23 +0200)]
crypto: x86/sha - load modules based on CPU features
commit
1c43c0f1f84aa59dfc98ce66f0a67b2922aa7f9d upstream.
x86 optimized crypto modules are built as modules rather than build-in and
they are not loaded when the crypto API is initialized, resulting in the
generic builtin module (sha1-generic) being used instead.
It was discovered when creating a sha1/sha256 checksum of a 2Gb file by
using kcapi-tools because it would take significantly longer than creating
a sha512 checksum of the same file. trace-cmd showed that for sha1/256 the
generic module was used, whereas for sha512 the optimized module was used
instead.
Add module aliases() for these x86 optimized crypto modules based on CPU
feature bits so udev gets a chance to load them later in the boot
process. This resulted in ~3x decrease in the real-time execution of
kcapi-dsg.
Fix is inspired from commit
aa031b8f702e ("crypto: x86/sha512 - load based on CPU features")
where a similar fix was done for sha512.
Cc: stable@vger.kernel.org # 5.15+
Suggested-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Suggested-by: Julian Andres Klode <julian.klode@canonical.com>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Mon, 30 Oct 2023 06:49:12 +0000 (12:19 +0530)]
scsi: qla2xxx: Fix system crash due to bad pointer access
commit
19597cad64d608aa8ac2f8aef50a50187a565223 upstream.
User experiences system crash when running AER error injection. The
perturbation causes the abort-all-I/O path to trigger. The driver assumes
all I/O on this path is FCP only. If there is both NVMe & FCP traffic, a
system crash happens. Add additional check to see if I/O is FCP or not
before access.
PID: 999019 TASK:
ff35d769f24722c0 CPU: 53 COMMAND: "kworker/53:1"
0 [
ff3f78b964847b58] machine_kexec at
ffffffffae86973d
1 [
ff3f78b964847ba8] __crash_kexec at
ffffffffae9be29d
2 [
ff3f78b964847c70] crash_kexec at
ffffffffae9bf528
3 [
ff3f78b964847c78] oops_end at
ffffffffae8282ab
4 [
ff3f78b964847c98] exc_page_fault at
ffffffffaf2da502
5 [
ff3f78b964847cc0] asm_exc_page_fault at
ffffffffaf400b62
[exception RIP: qla2x00_abort_srb+444]
RIP:
ffffffffc07b5f8c RSP:
ff3f78b964847d78 RFLAGS:
00010046
RAX:
0000000000000282 RBX:
ff35d74a0195a200 RCX:
ff35d76886fd03a0
RDX:
0000000000000001 RSI:
ffffffffc07c5ec8 RDI:
ff35d74a0195a200
RBP:
ff35d76913d22080 R8:
ff35d7694d103200 R9:
ff35d7694d103200
R10:
0000000100000000 R11:
ffffffffb05d6630 R12:
0000000000010000
R13:
ff3f78b964847df8 R14:
ff35d768d8754000 R15:
ff35d768877248e0
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0018
6 [
ff3f78b964847d70] qla2x00_abort_srb at
ffffffffc07b5f84 [qla2xxx]
7 [
ff3f78b964847de0] __qla2x00_abort_all_cmds at
ffffffffc07b6238 [qla2xxx]
8 [
ff3f78b964847e38] qla2x00_abort_all_cmds at
ffffffffc07ba635 [qla2xxx]
9 [
ff3f78b964847e58] qla2x00_terminate_rport_io at
ffffffffc08145eb [qla2xxx]
10 [
ff3f78b964847e70] fc_terminate_rport_io at
ffffffffc045987e [scsi_transport_fc]
11 [
ff3f78b964847e88] process_one_work at
ffffffffae914f15
12 [
ff3f78b964847ed0] worker_thread at
ffffffffae9154c0
13 [
ff3f78b964847f10] kthread at
ffffffffae91c456
14 [
ff3f78b964847f50] ret_from_fork at
ffffffffae8036ef
Cc: stable@vger.kernel.org
Fixes:
f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20231030064912.37912-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chandrakanth patil [Tue, 3 Oct 2023 11:00:18 +0000 (16:30 +0530)]
scsi: megaraid_sas: Increase register read retry rount from 3 to 30 for selected registers
commit
8e3ed9e786511ad800c33605ed904b9de49323cf upstream.
In BMC environments with concurrent access to multiple registers, certain
registers occasionally yield a value of 0 even after 3 retries due to
hardware errata. As a fix, we have extended the retry count from 3 to 30.
The same errata applies to the mpt3sas driver, and a similar patch has
been accepted. Please find more details in the mpt3sas patch reference
link.
Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com
Fixes:
272652fcbf1a ("scsi: megaraid_sas: add retry logic in megasas_readl")
Cc: stable@vger.kernel.org
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231003110021.168862-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ranjan Kumar [Fri, 20 Oct 2023 10:58:49 +0000 (16:28 +0530)]
scsi: mpt3sas: Fix loop logic
commit
3c978492c333f0c08248a8d51cecbe5eb5f617c9 upstream.
The retry loop continues to iterate until the count reaches 30, even after
receiving the correct value. Exit loop when a non-zero value is read.
Fixes:
4ca10f3e3174 ("scsi: mpt3sas: Perform additional retries if doorbell read returns 0")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20231020105849.6350-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shung-Hsi Yu [Thu, 2 Nov 2023 05:39:03 +0000 (13:39 +0800)]
bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
commit
291d044fd51f8484066300ee42afecf8c8db7b3a upstream.
BPF_END and BPF_NEG has a different specification for the source bit in
the opcode compared to other ALU/ALU64 instructions, and is either
reserved or use to specify the byte swap endianness. In both cases the
source bit does not encode source operand location, and src_reg is a
reserved field.
backtrack_insn() currently does not differentiate BPF_END and BPF_NEG
from other ALU/ALU64 instructions, which leads to r0 being incorrectly
marked as precise when processing BPF_ALU | BPF_TO_BE | BPF_END
instructions. This commit teaches backtrack_insn() to correctly mark
precision for such case.
While precise tracking of BPF_NEG and other BPF_END instructions are
correct and does not need fixing, this commit opt to process all BPF_NEG
and BPF_END instructions within the same if-clause to better align with
current convention used in the verifier (e.g. check_alu_op).
Fixes:
b5dc0163d8fd ("bpf: precise scalar_value tracking")
Cc: stable@vger.kernel.org
Reported-by: Mohamed Mahmoud <mmahmoud@redhat.com>
Closes: https://lore.kernel.org/r/87jzrrwptf.fsf@toke.dk
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Tao Lyu <tao.lyu@epfl.ch>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102053913.12004-2-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hao Sun [Wed, 1 Nov 2023 12:33:51 +0000 (13:33 +0100)]
bpf: Fix check_stack_write_fixed_off() to correctly spill imm
commit
811c363645b33e6e22658634329e95f383dfc705 upstream.
In check_stack_write_fixed_off(), imm value is cast to u32 before being
spilled to the stack. Therefore, the sign information is lost, and the
range information is incorrect when load from the stack again.
For the following prog:
0: r2 = r10
1: *(u64*)(r2 -40) = -44
2: r0 = *(u64*)(r2 - 40)
3: if r0 s<= 0xa goto +2
4: r0 = 1
5: exit
6: r0 = 0
7: exit
The verifier gives:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
1: (7a) *(u64 *)(r2 -40) = -44 ; R2_w=fp0 fp-40_w=
4294967252
2: (79) r0 = *(u64 *)(r2 -40) ; R0_w=
4294967252 R2_w=fp0
fp-40_w=
4294967252
3: (c5) if r0 s< 0xa goto pc+2
mark_precise: frame0: last_idx 3 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (79) r0 = *(u64 *)(r2 -40)
3: R0_w=
4294967252
4: (b7) r0 = 1 ; R0_w=1
5: (95) exit
verification time 7971 usec
stack depth 40
processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0
So remove the incorrect cast, since imm field is declared as s32, and
__mark_reg_known() takes u64, so imm would be correctly sign extended
by compiler.
Fixes:
ecdf985d7615 ("bpf: track immediate values written to stack by BPF_ST instruction")
Cc: stable@vger.kernel.org
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231101-fix-check-stack-write-v3-1-f05c2b1473d5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Sat, 7 Oct 2023 04:09:28 +0000 (21:09 -0700)]
randstruct: Fix gcc-plugin performance mode to stay in group
commit
381fdb73d1e2a48244de7260550e453d1003bb8e upstream.
The performance mode of the gcc-plugin randstruct was shuffling struct
members outside of the cache-line groups. Limit the range to the
specified group indexes.
Cc: linux-hardening@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-by: Lukas Loidolt <e1634039@student.tuwien.ac.at>
Closes: https://lore.kernel.org/all/
f3ca77f0-e414-4065-83a5-
ae4c4d25545d@student.tuwien.ac.at
Fixes:
313dd1b62921 ("gcc-plugins: Add the randstruct plugin")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Wed, 18 Oct 2023 15:34:23 +0000 (01:34 +1000)]
powerpc/perf: Fix disabling BHRB and instruction sampling
commit
ea142e590aec55ba40c5affb4d49e68c713c63dc upstream.
When the PMU is disabled, MMCRA is not updated to disable BHRB and
instruction sampling. This can lead to those features remaining enabled,
which can slow down a real or emulated CPU.
Fixes:
1cade527f6e9 ("powerpc/perf: BHRB control to disable BHRB logic when not used")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231018153423.298373-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Thu, 28 Sep 2023 07:29:53 +0000 (10:29 +0300)]
perf intel-pt: Fix async branch flags
commit
f2d87895cbc4af80649850dcf5da36de6b2ed3dd upstream.
Ensure PERF_IP_FLAG_ASYNC is set always for asynchronous branches (i.e.
interrupts etc).
Fixes:
90e457f7be08 ("perf tools: Add Intel PT support")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230928072953.19369-1-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vikash Garodia [Thu, 10 Aug 2023 02:25:01 +0000 (07:55 +0530)]
media: venus: hfi: add checks to perform sanity on queue pointers
commit
5e538fce33589da6d7cb2de1445b84d3a8a692f7 upstream.
Read and write pointers are used to track the packet index in the memory
shared between video driver and firmware. There is a possibility of OOB
access if the read or write pointer goes beyond the queue memory size.
Add checks for the read and write pointer to avoid OOB access.
Cc: stable@vger.kernel.org
Fixes:
d96d3f30c0f2 ("[media] media: venus: hfi: add Venus HFI files")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harshit Mogalapalli [Fri, 27 Oct 2023 17:28:22 +0000 (10:28 -0700)]
i915/perf: Fix NULL deref bugs with drm_dbg() calls
commit
471aa951bf1206d3c10d0daa67005b8e4db4ff83 upstream.
When i915 perf interface is not available dereferencing it will lead to
NULL dereferences.
As returning -ENOTSUPP is pretty clear return when perf interface is not
available.
Fixes:
2fec539112e8 ("i915/perf: Replace DRM_DEBUG with driver specific drm_dbg call")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027172822.2753059-1-harshit.m.mogalapalli@oracle.com
[tursulin: added stable tag]
(cherry picked from commit
36f27350ff745bd228ab04d7845dfbffc177a889)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ekaterina Esina [Mon, 13 Nov 2023 16:42:41 +0000 (19:42 +0300)]
cifs: fix check of rc in function generate_smb3signingkey
[ Upstream commit
181724fc72486dec2bec8803459be05b5162aaa8 ]
Remove extra check after condition, add check after generating key
for encryption. The check is needed to return non zero rc before
rewriting it with generating key for decryption.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Fixes:
d70e9fa55884 ("cifs: try opening channels after mounting")
Signed-off-by: Ekaterina Esina <eesina@astralinux.ru>
Co-developed-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anastasia Belova [Mon, 13 Nov 2023 14:52:32 +0000 (17:52 +0300)]
cifs: spnego: add ';' in HOST_KEY_LEN
[ Upstream commit
ff31ba19d732efb9aca3633935d71085e68d5076 ]
"host=" should start with ';' (as in cifs_get_spnego_key)
So its length should be 6.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Fixes:
7c9c3760b3a5 ("[CIFS] add constants for string lengths of keynames in SPNEGO upcall string")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Co-developed-by: Ekaterina Esina <eesina@astralinux.ru>
Signed-off-by: Ekaterina Esina <eesina@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen Yu [Mon, 27 Mar 2023 03:17:44 +0000 (11:17 +0800)]
tools/power/turbostat: Enable the C-state Pre-wake printing
[ Upstream commit
b61b7d8c4c22c4298a50ae5d0ee88facb85ce665 ]
Currently the C-state Pre-wake will not be printed due to the
probe has not been invoked. Invoke the probe function accordingly.
Fixes:
aeb01e6d71ff ("tools/power turbostat: Print the C-state Pre-wake settings")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Rui [Sat, 25 Mar 2023 13:57:07 +0000 (21:57 +0800)]
tools/power/turbostat: Fix a knl bug
[ Upstream commit
137f01b3529d292a68d22e9681e2f903c768f790 ]
MSR_KNL_CORE_C6_RESIDENCY should be evaluated only if
1. this is KNL platform
AND
2. need to get C6 residency or need to calculate C1 residency
Fix the broken logic introduced by commit
1e9042b9c8d4 ("tools/power
turbostat: Fix CPU%C1 display value").
Fixes:
1e9042b9c8d4 ("tools/power turbostat: Fix CPU%C1 display value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vlad Buslov [Tue, 14 Nov 2023 17:59:15 +0000 (18:59 +0100)]
macvlan: Don't propagate promisc change to lower dev in passthru
[ Upstream commit
7e1caeace0418381f36b3aa8403dfd82fc57fc53 ]
Macvlan device in passthru mode sets its lower device promiscuous mode
according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to
its own promiscuity setting. However, macvlan_change_rx_flags() function
doesn't check the mode before propagating such changes to the lower device
which can cause net_device->promiscuity counter overflow as illustrated by
reproduction example [0] and resulting dmesg log [1]. Fix the issue by
first verifying the mode in macvlan_change_rx_flags() function before
propagating promiscuous mode change to the lower device.
[0]:
ip link add macvlan1 link enp8s0f0 type macvlan mode passthru
ip link set macvlan1 promisc on
ip l set dev macvlan1 up
ip link set macvlan1 promisc off
ip l set dev macvlan1 down
ip l set dev macvlan1 up
[1]:
[ 5156.281724] macvlan1: entered promiscuous mode
[ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.287639] macvlan1: left promiscuous mode
[ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode
[ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.
Fixes:
efdbd2b30caa ("macvlan: Propagate promiscuity setting to lower devices.")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rahul Rameshbabu [Tue, 14 Nov 2023 21:58:46 +0000 (13:58 -0800)]
net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors
[ Upstream commit
1b2bd0c0264febcd8d47209079a6671c38e6558b ]
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails. This logic for representors is identical to normal flow
with ethtool.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
78 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
77 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
78 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
79 | fw_rev_maj(mdev), fw_rev_min(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
80 | fw_rev_sub(mdev), mdev->board_id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
cf83c8fdcd47 ("net/mlx5e: Add missing ethtool driver info for representors")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rahul Rameshbabu [Tue, 14 Nov 2023 21:58:45 +0000 (13:58 -0800)]
net/mlx5e: Check return value of snprintf writing to fw_version buffer
[ Upstream commit
41e63c2baa11dc2aa71df5dd27a5bd87d11b6bbb ]
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
49 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
48 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
49 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
50 | fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
51 | mdev->board_id);
| ~~~~~~~~~~~~~~~
Fixes:
84e11edb71de ("net/mlx5e: Show board id in ethtool driver information")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Saeed Mahameed [Tue, 14 Nov 2023 21:58:44 +0000 (13:58 -0800)]
net/mlx5e: Reduce the size of icosq_str
[ Upstream commit
dce94142842e119b982c27c1b62bd20890c7fd21 ]
icosq_str size is unnecessarily too long, and it causes a build warning
-Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B,
hence this patch reduces the size to 32B which should be more than enough
to host the string: "ICOSQ: 0x%x, ".
While here, add a missing space in the formatted string.
This fixes the following build warning:
$ KCFLAGS='-Wall -Werror'
$ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout':
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56:
error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=]
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288
717 | snprintf(err_str, sizeof(err_str),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
719 | rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
521f31af004a ("net/mlx5e: Allow RQ outside of channel context")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vlad Buslov [Tue, 14 Nov 2023 21:58:38 +0000 (13:58 -0800)]
net/mlx5e: Fix pedit endianness
[ Upstream commit
0c101a23ca7eaf00eef1328eefb04b3a93401cc8 ]
Referenced commit addressed endianness issue in mlx5 pedit implementation
in ad hoc manner instead of systematically treating integer values
according to their types which left pedit fields of sizes not equal to 4
and where the bytes being modified are not least significant ones broken on
big endian machines since wrong bits will be consumed during parsing which
leads to following example error when applying pedit to source and
destination MAC addresses:
[Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0)
[Wed Oct 18 12:52:42 2023] mask:
00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask:
0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask:
000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask:
0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask:
000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask:
00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask:
00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00 ............
Treat masks and values of pedit and filter match as network byte order,
refactor pointers to them to void pointers instead of confusing u32
pointers and only cast to pointer-to-integer when reading a value from
them. Treat pedit mlx5_fields->field_mask as host byte order according to
its type u32, change the constants in fields array accordingly.
Fixes:
82198d8bcdef ("net/mlx5e: Fix endianness when calculating pedit mask first bit")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gavin Li [Tue, 14 Nov 2023 21:58:37 +0000 (13:58 -0800)]
net/mlx5e: fix double free of encap_header in update funcs
[ Upstream commit
3a4aa3cb83563df942be49d145ee3b7ddf17d6bb ]
Follow up to the previous patch to fix the same issue for
mlx5e_tc_tun_update_header_ipv4{6} when mlx5_packet_reformat_alloc()
fails.
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_update_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes:
a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dust Li [Tue, 14 Nov 2023 21:58:36 +0000 (13:58 -0800)]
net/mlx5e: fix double free of encap_header
[ Upstream commit
6f9b1a0731662648949a1c0587f6acb3b7f8acf1 ]
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail.
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes:
d589e785baf5e ("net/mlx5e: Allow concurrent creation of encap entries")
Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com>
Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baruch Siach [Mon, 13 Nov 2023 17:42:50 +0000 (19:42 +0200)]
net: stmmac: avoid rx queue overrun
[ Upstream commit
b6cb4541853c7ee512111b0e7ddf3cb66c99c137 ]
dma_rx_size can be set as low as 64. Rx budget might be higher than
that. Make sure to not overrun allocated rx buffers when budget is
larger.
Leave one descriptor unused to avoid wrap around of 'dirty_rx' vs
'cur_rx'.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Fixes:
47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Link: https://lore.kernel.org/r/d95413e44c97d4692e72cec13a75f894abeb6998.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baruch Siach [Mon, 13 Nov 2023 17:42:49 +0000 (19:42 +0200)]
net: stmmac: fix rx budget limit check
[ Upstream commit
fa02de9e75889915b554eda1964a631fd019973b ]
The while loop condition verifies 'count < limit'. Neither value change
before the 'count >= limit' check. As is this check is dead code. But
code inspection reveals a code path that modifies 'count' and then goto
'drain_data' and back to 'read_again'. So there is a need to verify
count value sanity after 'read_again'.
Move 'read_again' up to fix the count limit check.
Fixes:
ec222003bd94 ("net: stmmac: Prepare to add Split Header support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/d9486296c3b6b12ab3a0515fcd47d56447a07bfc.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Fri, 3 Nov 2023 06:42:51 +0000 (09:42 +0300)]
netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()
[ Upstream commit
c301f0981fdd3fd1ffac6836b423c4d7a8e0eb63 ]
The problem is in nft_byteorder_eval() where we are iterating through a
loop and writing to dst[0], dst[1], dst[2] and so on... On each
iteration we are writing 8 bytes. But dst[] is an array of u32 so each
element only has space for 4 bytes. That means that every iteration
overwrites part of the previous element.
I spotted this bug while reviewing commit
caf3ef7468f7 ("netfilter:
nf_tables: prevent OOB access in nft_byteorder_eval") which is a related
issue. I think that the reason we have not detected this bug in testing
is that most of time we only write one element.
Fixes:
ce1e7989d989 ("netfilter: nft_byteorder: provide 64bit le/be conversion")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linkui Xiao [Wed, 1 Nov 2023 03:20:18 +0000 (11:20 +0800)]
netfilter: nf_conntrack_bridge: initialize err to 0
[ Upstream commit
a44af08e3d4d7566eeea98d7a29fe06e7b9de944 ]
K2CI reported a problem:
consume_skb(skb);
return err;
[nf_br_ip_fragment() error] uninitialized symbol 'err'.
err is not initialized, because returning 0 is expected, initialize err
to 0.
Fixes:
3c171f496ef5 ("netfilter: bridge: add connection tracking system")
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Linkui Xiao <xiaolinkui@kylinos.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Mon, 13 Nov 2023 13:49:38 +0000 (13:49 +0000)]
af_unix: fix use-after-free in unix_stream_read_actor()
[ Upstream commit
4b7b492615cf3017190f55444f7016812b66611d ]
syzbot reported the following crash [1]
After releasing unix socket lock, u->oob_skb can be changed
by another thread. We must temporarily increase skb refcount
to make sure this other thread will not free the skb under us.
[1]
BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866
Read of size 4 at addr
ffff88801f3b9cc4 by task syz-executor107/5297
CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866
unix_stream_recv_urg net/unix/af_unix.c:2587 [inline]
unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666
unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903
sock_recvmsg_nosec net/socket.c:1044 [inline]
sock_recvmsg+0xe2/0x170 net/socket.c:1066
____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803
___sys_recvmsg+0x115/0x1a0 net/socket.c:2845
__sys_recvmsg+0x114/0x1e0 net/socket.c:2875
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fc67492c559
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007fc6748ab228 EFLAGS:
00000246 ORIG_RAX:
000000000000002f
RAX:
ffffffffffffffda RBX:
000000000000001c RCX:
00007fc67492c559
RDX:
0000000040010083 RSI:
0000000020000140 RDI:
0000000000000004
RBP:
00007fc6749b6348 R08:
00007fc6748ab6c0 R09:
00007fc6748ab6c0
R10:
0000000000000000 R11:
0000000000000246 R12:
00007fc6749b6340
R13:
00007fc6749b634c R14:
00007ffe9fac52a0 R15:
00007ffe9fac5388
</TASK>
Allocated by task 5295:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523
__alloc_skb+0x287/0x330 net/core/skbuff.c:641
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
sock_alloc_send_skb include/net/sock.h:1884 [inline]
queue_oob net/unix/af_unix.c:2147 [inline]
unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Freed by task 5295:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:164 [inline]
slab_free_hook mm/slub.c:1800 [inline]
slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826
slab_free mm/slub.c:3809 [inline]
kmem_cache_free+0xf8/0x340 mm/slub.c:3831
kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015
__kfree_skb net/core/skbuff.c:1073 [inline]
consume_skb net/core/skbuff.c:1288 [inline]
consume_skb+0xdf/0x170 net/core/skbuff.c:1282
queue_oob net/unix/af_unix.c:2178 [inline]
unix_stream_sendmsg+0xd49/0x10a0 net/unix/af_unix.c:2301
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The buggy address belongs to the object at
ffff88801f3b9c80
which belongs to the cache skbuff_head_cache of size 240
The buggy address is located 68 bytes inside of
freed 240-byte region [
ffff88801f3b9c80,
ffff88801f3b9d70)
The buggy address belongs to the physical page:
page:
ffffea00007cee40 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x1f3b9
flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw:
00fff00000000800 ffff888142a60640 dead000000000122 0000000000000000
raw:
0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5299, tgid 5283 (syz-executor107), ts
103803840339, free_ts
103600093431
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x2cf/0x340 mm/page_alloc.c:1537
prep_new_page mm/page_alloc.c:1544 [inline]
get_page_from_freelist+0xa25/0x36c0 mm/page_alloc.c:3312
__alloc_pages+0x1d0/0x4a0 mm/page_alloc.c:4568
alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133
alloc_slab_page mm/slub.c:1870 [inline]
allocate_slab+0x251/0x380 mm/slub.c:2017
new_slab mm/slub.c:2070 [inline]
___slab_alloc+0x8c7/0x1580 mm/slub.c:3223
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322
__slab_alloc_node mm/slub.c:3375 [inline]
slab_alloc_node mm/slub.c:3468 [inline]
kmem_cache_alloc_node+0x132/0x3c0 mm/slub.c:3523
__alloc_skb+0x287/0x330 net/core/skbuff.c:641
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
sock_alloc_send_skb include/net/sock.h:1884 [inline]
queue_oob net/unix/af_unix.c:2147 [inline]
unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1137 [inline]
free_unref_page_prepare+0x4f8/0xa90 mm/page_alloc.c:2347
free_unref_page+0x33/0x3b0 mm/page_alloc.c:2487
__unfreeze_partials+0x21d/0x240 mm/slub.c:2655
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
slab_alloc mm/slub.c:3486 [inline]
__kmem_cache_alloc_lru mm/slub.c:3493 [inline]
kmem_cache_alloc+0x15d/0x380 mm/slub.c:3502
vm_area_dup+0x21/0x2f0 kernel/fork.c:500
__split_vma+0x17d/0x1070 mm/mmap.c:2365
split_vma mm/mmap.c:2437 [inline]
vma_modify+0x25d/0x450 mm/mmap.c:2472
vma_modify_flags include/linux/mm.h:3271 [inline]
mprotect_fixup+0x228/0xc80 mm/mprotect.c:635
do_mprotect_pkey+0x852/0xd60 mm/mprotect.c:809
__do_sys_mprotect mm/mprotect.c:830 [inline]
__se_sys_mprotect mm/mprotect.c:827 [inline]
__x64_sys_mprotect+0x78/0xb0 mm/mprotect.c:827
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Memory state around the buggy address:
ffff88801f3b9b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801f3b9c00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
>
ffff88801f3b9c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88801f3b9d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc
ffff88801f3b9d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
Fixes:
876c14ad014d ("af_unix: fix holding spinlock in oob handling")
Reported-and-tested-by: syzbot+7a2d546fa43e49315ed3@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rao Shoaib <rao.shoaib@oracle.com>
Reviewed-by: Rao shoaib <rao.shoaib@oracle.com>
Link: https://lore.kernel.org/r/20231113134938.168151-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Walleij [Thu, 9 Nov 2023 09:03:14 +0000 (10:03 +0100)]
net: ethernet: cortina: Fix MTU max setting
[ Upstream commit
dc6c0bfbaa947dd7976e30e8c29b10c868b6fa42 ]
The RX max frame size is over 10000 for the Gemini ethernet,
but the TX max frame size is actually just 2047 (0x7ff after
checking the datasheet). Reflect this in what we offer to Linux,
cap the MTU at the TX max frame minus ethernet headers.
We delete the code disabling the hardware checksum for large
MTUs as netdev->mtu can no longer be larger than
netdev->max_mtu meaning the if()-clause in gmac_fix_features()
is never true.
Fixes:
4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-3-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Walleij [Thu, 9 Nov 2023 09:03:13 +0000 (10:03 +0100)]
net: ethernet: cortina: Handle large frames
[ Upstream commit
d4d0c5b4d279bfe3585fbd806efefd3e51c82afa ]
The Gemini ethernet controller provides hardware checksumming
for frames up to 1514 bytes including ethernet headers but not
FCS.
If we start sending bigger frames (after first bumping up the MTU
on both interfaces sending and receiving the frames), truncated
packets start to appear on the target such as in this tcpdump
resulting from ping -s 1474:
23:34:17.241983 14:d6:4d:a8:3c:4f (oui Unknown) > bc:ae:c5:6b:a8:3d (oui Unknown),
ethertype IPv4 (0x0800), length 1514: truncated-ip - 2 bytes missing!
(tos 0x0, ttl 64, id 32653, offset 0, flags [DF], proto ICMP (1), length 1502)
OpenWrt.lan > Fecusia: ICMP echo request, id 1672, seq 50, length 1482
If we bypass the hardware checksumming and provide a software
fallback, everything starts working fine up to the max TX MTU
of 2047 bytes, for example ping -s2000 192.168.1.2:
00:44:29.587598 bc:ae:c5:6b:a8:3d (oui Unknown) > 14:d6:4d:a8:3c:4f (oui Unknown),
ethertype IPv4 (0x0800), length 2042:
(tos 0x0, ttl 64, id 51828, offset 0, flags [none], proto ICMP (1), length 2028)
Fecusia > OpenWrt.lan: ICMP echo reply, id 1683, seq 4, length 2008
The bit enabling to bypass hardware checksum (or any of the
"TSS" bits) are undocumented in the hardware reference manual.
The entire hardware checksum unit appears undocumented. The
conclusion that we need to use the "bypass" bit was found by
trial-and-error.
Since no hardware checksum will happen, we slot in a software
checksum fallback.
Check for the condition where we need to compute checksum on the
skb with either hardware or software using == CHECKSUM_PARTIAL instead
of != CHECKSUM_NONE which is an incomplete check according to
<linux/skbuff.h>.
On the D-Link DIR-685 router this fixes a bug on the conduit
interface to the RTL8366RB DSA switch: as the switch needs to add
space for its tag it increases the MTU on the conduit interface
to 1504 and that means that when the router sends packages
of 1500 bytes these get an extra 4 bytes of DSA tag and the
transfer fails because of the erroneous hardware checksumming,
affecting such basic functionality as the LuCI web interface.
Fixes:
4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-2-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Walleij [Thu, 9 Nov 2023 09:03:12 +0000 (10:03 +0100)]
net: ethernet: cortina: Fix max RX frame define
[ Upstream commit
510e35fb931ffc3b100e5d5ae4595cd3beca9f1a ]
Enumerator 3 is 1548 bytes according to the datasheet.
Not 1542.
Fixes:
4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-1-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 9 Nov 2023 18:01:02 +0000 (18:01 +0000)]
bonding: stop the device in bond_setup_by_slave()
[ Upstream commit
3cffa2ddc4d3fcf70cde361236f5a614f81a09b2 ]
Commit
9eed321cde22 ("net: lapbether: only support ethernet devices")
has been able to keep syzbot away from net/lapb, until today.
In the following splat [1], the issue is that a lapbether device has
been created on a bonding device without members. Then adding a non
ARPHRD_ETHER member forced the bonding master to change its type.
The fix is to make sure we call dev_close() in bond_setup_by_slave()
so that the potential linked lapbether devices (or any other devices
having assumptions on the physical device) are removed.
A similar bug has been addressed in commit
40baec225765
("bonding: fix panic on non-ARPHRD_ETHER enslave failure")
[1]
skbuff: skb_under_panic: text:
ffff800089508810 len:44 put:40 head:
ffff0000c78e7c00 data:
ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0
kernel BUG at net/core/skbuff.c:192 !
Internal error: Oops - BUG:
00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
pstate:
60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic net/core/skbuff.c:188 [inline]
pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202
lr : skb_panic net/core/skbuff.c:188 [inline]
lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202
sp :
ffff800096a06aa0
x29:
ffff800096a06ab0 x28:
ffff800096a06ba0 x27:
dfff800000000000
x26:
ffff0000ce9b9b50 x25:
0000000000000016 x24:
ffff0000c78e7bea
x23:
ffff0000c78e7c00 x22:
000000000000002c x21:
0000000000000140
x20:
0000000000000028 x19:
ffff800089508810 x18:
ffff800096a06100
x17:
0000000000000000 x16:
ffff80008a629a3c x15:
0000000000000001
x14:
1fffe00036837a32 x13:
0000000000000000 x12:
0000000000000000
x11:
0000000000000201 x10:
0000000000000000 x9 :
cb50b496c519aa00
x8 :
cb50b496c519aa00 x7 :
0000000000000001 x6 :
0000000000000001
x5 :
ffff800096a063b8 x4 :
ffff80008e280f80 x3 :
ffff8000805ad11c
x2 :
0000000000000001 x1 :
0000000100000201 x0 :
0000000000000086
Call trace:
skb_panic net/core/skbuff.c:188 [inline]
skb_under_panic+0x13c/0x140 net/core/skbuff.c:202
skb_push+0xf0/0x108 net/core/skbuff.c:2446
ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384
dev_hard_header include/linux/netdevice.h:3136 [inline]
lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257
lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447
lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149
lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251
__lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326
lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492
notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93
raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1970 [inline]
call_netdevice_notifiers_extack net/core/dev.c:2008 [inline]
call_netdevice_notifiers net/core/dev.c:2022 [inline]
__dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508
dev_close_many+0x1e0/0x470 net/core/dev.c:1559
dev_close+0x174/0x250 net/core/dev.c:1585
lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466
notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93
raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1970 [inline]
call_netdevice_notifiers_extack net/core/dev.c:2008 [inline]
call_netdevice_notifiers net/core/dev.c:2022 [inline]
__dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508
dev_close_many+0x1e0/0x470 net/core/dev.c:1559
dev_close+0x174/0x250 net/core/dev.c:1585
bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332
bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539
dev_ifsioc+0x754/0x9ac
dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786
sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217
sock_ioctl+0x4e8/0x834 net/socket.c:1322
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code:
aa1803e6 aa1903e7 a90023f5 94785b8b (
d4210000)
Fixes:
872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231109180102.4085183-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 9 Nov 2023 17:48:59 +0000 (17:48 +0000)]
ptp: annotate data-race around q->head and q->tail
[ Upstream commit
73bde5a3294853947252cd9092a3517c7cb0cd2d ]
As I was working on a syzbot report, I found that KCSAN would
probably complain that reading q->head or q->tail without
barriers could lead to invalid results.
Add corresponding READ_ONCE() and WRITE_ONCE() to avoid
load-store tearing.
Fixes:
d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20231109174859.3995880-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>