platform/kernel/linux-rpi.git
2 years agoALSA: pcm: Fix races among concurrent read/write and buffer changes
Takashi Iwai [Tue, 22 Mar 2022 17:07:18 +0000 (18:07 +0100)]
ALSA: pcm: Fix races among concurrent read/write and buffer changes

commit dca947d4d26dbf925a64a6cfb2ddbc035e831a3d upstream.

In the current PCM design, the read/write syscalls (as well as the
equivalent ioctls) are allowed before the PCM stream is running, that
is, at PCM PREPARED state.  Meanwhile, we also allow to re-issue
hw_params and hw_free ioctl calls at the PREPARED state that may
change or free the buffers, too.  The problem is that there is no
protection against those mix-ups.

This patch applies the previously introduced runtime->buffer_mutex to
the read/write operations so that the concurrent hw_params or hw_free
call can no longer interfere during the operation.  The mutex is
unlocked before scheduling, so we don't take it too long.

Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoALSA: pcm: Fix races among concurrent hw_params and hw_free calls
Takashi Iwai [Tue, 22 Mar 2022 17:07:17 +0000 (18:07 +0100)]
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls

commit 92ee3c60ec9fe64404dc035e7c41277d74aa26cb upstream.

Currently we have neither proper check nor protection against the
concurrent calls of PCM hw_params and hw_free ioctls, which may result
in a UAF.  Since the existing PCM stream lock can't be used for
protecting the whole ioctl operations, we need a new mutex to protect
those racy calls.

This patch introduced a new mutex, runtime->buffer_mutex, and applies
it to both hw_params and hw_free ioctl code paths.  Along with it, the
both functions are slightly modified (the mmap_count check is moved
into the state-check block) for code simplicity.

Reported-by: Hu Jiahui <kirin.say@gmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoALSA: hda/realtek: Add quirk for ASUS GA402
Jason Zheng [Sun, 13 Mar 2022 09:22:16 +0000 (04:22 -0500)]
ALSA: hda/realtek: Add quirk for ASUS GA402

commit b7557267c233b55d8e8d7ba4c68cf944fe2ec02c upstream.

ASUS GA402 requires a workaround to manage the routing of its 4 speakers
like the other ASUS models. Add a corresponding quirk entry to fix it.

Signed-off-by: Jason Zheng <jasonzheng2004@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220313092216.29858-1-jasonzheng2004@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
huangwenhui [Fri, 11 Mar 2022 09:38:36 +0000 (17:38 +0800)]
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671

commit 882bd07f564f97fca6e42ce6ce627ce24ce1ef5a upstream.

On a HP 288 Pro G8, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.

Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311093836.20754-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoALSA: hda/realtek: Add quirk for Clevo NP50PNJ
Tim Crawford [Mon, 7 Mar 2022 19:32:29 +0000 (12:32 -0700)]
ALSA: hda/realtek: Add quirk for Clevo NP50PNJ

commit 9cb727506704b5323998047789fc871e64a6aa14 upstream.

Fixes headset detection on Clevo NP50PNJ.

Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220307193229.5141-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoALSA: hda/realtek: Add quirk for Clevo NP70PNJ
Tim Crawford [Fri, 4 Mar 2022 17:08:40 +0000 (10:08 -0700)]
ALSA: hda/realtek: Add quirk for Clevo NP70PNJ

commit 0c20fce13e6e111463e3a15ce3cf6713fe518388 upstream.

Fixes headset detection on Clevo NP70PNJ.

Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220304170840.3351-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoALSA: usb-audio: add mapping for new Corsair Virtuoso SE
Reza Jahanbakhshi [Fri, 4 Mar 2022 21:23:02 +0000 (22:23 +0100)]
ALSA: usb-audio: add mapping for new Corsair Virtuoso SE

commit cd94df1795418056a19ff4cb44eadfc18ac99a57 upstream.

New device id for Corsair Virtuoso SE RGB Wireless that currently is not
in the mixer_map. This entry in the mixer_map is necessary in order to
label its mixer appropriately and allow userspace to pick the correct
volume controls. For instance, my own Corsair Virtuoso SE RGB Wireless
headset has this new ID and consequently, the sidetone and volume are not
 working correctly without this change.
> sudo lsusb -v | grep -i corsair
Bus 007 Device 011: ID 1b1c:0a40 Corsair CORSAIR VIRTUOSO SE Wireless Gam
  idVendor           0x1b1c Corsair
  iManufacturer           1 Corsair
  iProduct                2 CORSAIR VIRTUOSO SE Wireless Gaming Headset

Signed-off-by: Reza Jahanbakhshi <reza.jahanbakhshi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220304212303.195949-1-reza.jahanbakhshi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoALSA: oss: Fix PCM OSS buffer allocation overflow
Takashi Iwai [Fri, 18 Mar 2022 08:20:36 +0000 (09:20 +0100)]
ALSA: oss: Fix PCM OSS buffer allocation overflow

commit efb6402c3c4a7c26d97c92d70186424097b6e366 upstream.

We've got syzbot reports hitting INT_MAX overflow at vmalloc()
allocation that is called from snd_pcm_plug_alloc().  Although we
apply the restrictions to input parameters, it's based only on the
hw_params of the underlying PCM device.  Since the PCM OSS layer
allocates a temporary buffer for the data conversion, the size may
become unexpectedly large when more channels or higher rates is given;
in the reported case, it went over INT_MAX, hence it hits WARN_ON().

This patch is an attempt to avoid such an overflow and an allocation
for too large buffers.  First off, it adds the limit of 1MB as the
upper bound for period bytes.  This must be large enough for all use
cases, and we really don't want to handle a larger temporary buffer
than this size.  The size check is performed at two places, where the
original period bytes is calculated and where the plugin buffer size
is calculated.

In addition, the driver uses array_size() and array3_size() for
multiplications to catch overflows for the converted period size and
buffer bytes.

Reported-by: syzbot+72732c532ac1454eeee9@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/00000000000085b1b305da5a66f3@google.com
Link: https://lore.kernel.org/r/20220318082036.29699-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoASoC: sti: Fix deadlock via snd_pcm_stop_xrun() call
Takashi Iwai [Tue, 15 Mar 2022 16:41:58 +0000 (17:41 +0100)]
ASoC: sti: Fix deadlock via snd_pcm_stop_xrun() call

commit 455c5653f50e10b4f460ef24e99f0044fbe3401c upstream.

This is essentially a revert of the commit dc865fb9e7c2 ("ASoC: sti:
Use snd_pcm_stop_xrun() helper"), which converted the manual
snd_pcm_stop() calls with snd_pcm_stop_xrun().

The commit above introduced a deadlock as snd_pcm_stop_xrun() itself
takes the PCM stream lock while the caller already holds it.  Since
the conversion was done only for consistency reason and the open-call
with snd_pcm_stop() to the XRUN state is a correct usage, let's revert
the commit back as the fix.

Fixes: dc865fb9e7c2 ("ASoC: sti: Use snd_pcm_stop_xrun() helper")
Reported-by: Daniel Palmer <daniel@0x0f.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220315091319.3351522-1-daniel@0x0f.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220315164158.19804-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agollc: fix netdevice reference leaks in llc_ui_bind()
Eric Dumazet [Wed, 23 Mar 2022 00:41:47 +0000 (17:41 -0700)]
llc: fix netdevice reference leaks in llc_ui_bind()

commit 764f4eb6846f5475f1244767d24d25dd86528a4a upstream.

Whenever llc_ui_bind() and/or llc_ui_autobind()
took a reference on a netdevice but subsequently fail,
they must properly release their reference
or risk the infamous message from unregister_netdevice()
at device dismantle.

unregister_netdevice: waiting for eth0 to become free. Usage count = 3

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: 赵子轩 <beraphin@gmail.com>
Reported-by: Stoyan Manolov <smanolov@suse.de>
Link: https://lore.kernel.org/r/20220323004147.1990845-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoBluetooth: btusb: Add another Realtek 8761BU
Helmut Grohne [Sat, 26 Feb 2022 15:22:56 +0000 (16:22 +0100)]
Bluetooth: btusb: Add another Realtek 8761BU

commit 6dfbe29f45fb0bde29213dbd754a79e8bfc6ecef upstream.

This device is sometimes wrapped with a label "EDUP".

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=107 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2550 ProdID=8761 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00E04C239987
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Helmut Grohne <helmut@subdivi.de>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955351
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agotpm: Fix error handling in async work
Tadeusz Struk [Sun, 16 Jan 2022 01:26:26 +0000 (17:26 -0800)]
tpm: Fix error handling in async work

commit 2e8e4c8f6673247e22efc7985ce5497accd16f88 upstream.

When an invalid (non existing) handle is used in a TPM command,
that uses the resource manager interface (/dev/tpmrm0) the resource
manager tries to load it from its internal cache, but fails and
the tpm_dev_transmit returns an -EINVAL error to the caller.
The existing async handler doesn't handle these error cases
currently and the condition in the poll handler never returns
mask with EPOLLIN set.
The result is that the poll call blocks and the application gets stuck
until the user_read_timer wakes it up after 120 sec.
Change the tpm_dev_async_work function to handle error conditions
returned from tpm_dev_transmit they are also reflected in the poll mask
and a correct error code could passed back to the caller.

Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <linux-integrity@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Fixes: 9e1b74a63f77 ("tpm: add support for nonblocking operation")
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agonet: ipv6: fix skb_over_panic in __ip6_append_data
Tadeusz Struk [Thu, 10 Mar 2022 23:25:38 +0000 (15:25 -0800)]
net: ipv6: fix skb_over_panic in __ip6_append_data

commit 5e34af4142ffe68f01c8a9acae83300f8911e20c upstream.

Syzbot found a kernel bug in the ipv6 stack:
LINK: https://syzkaller.appspot.com/bug?id=205d6f11d72329ab8d62a610c44c5e7e25415580
The reproducer triggers it by sending a crafted message via sendmmsg()
call, which triggers skb_over_panic, and crashes the kernel:

skbuff: skb_over_panic: text:ffffffff84647fb4 len:65575 put:65575
head:ffff888109ff0000 data:ffff888109ff0088 tail:0x100af end:0xfec0
dev:<NULL>

Update the check that prevents an invalid packet with MTU equal
to the fregment header size to eat up all the space for payload.

The reproducer can be found here:
LINK: https://syzkaller.appspot.com/text?tag=ReproC&x=1648c83fb00000
Reported-by: syzbot+e223cf47ec8ae183f2a0@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220310232538.1044947-1-tadeusz.struk@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agonfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION
Jordy Zomer [Tue, 11 Jan 2022 16:44:51 +0000 (17:44 +0100)]
nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION

commit 4fbcc1a4cb20fe26ad0225679c536c80f1648221 upstream.

It appears that there are some buffer overflows in EVT_TRANSACTION.
This happens because the length parameters that are passed to memcpy
come directly from skb->data and are not guarded in any way.

Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Denis Efremov <denis.e.efremov@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoLinux 5.15.31
Greg Kroah-Hartman [Wed, 23 Mar 2022 08:16:44 +0000 (09:16 +0100)]
Linux 5.15.31

Link: https://lore.kernel.org/r/20220321133220.559554263@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agobtrfs: skip reserved bytes warning on unmount after log cleanup failure
Filipe Manana [Tue, 18 Jan 2022 13:39:34 +0000 (13:39 +0000)]
btrfs: skip reserved bytes warning on unmount after log cleanup failure

commit 40cdc509877bacb438213b83c7541c5e24a1d9ec upstream.

After the recent changes made by commit c2e39305299f01 ("btrfs: clear
extent buffer uptodate when we fail to write it") and its followup fix,
commit 651740a5024117 ("btrfs: check WRITE_ERR when trying to read an
extent buffer"), we can now end up not cleaning up space reservations of
log tree extent buffers after a transaction abort happens, as well as not
cleaning up still dirty extent buffers.

This happens because if writeback for a log tree extent buffer failed,
then we have cleared the bit EXTENT_BUFFER_UPTODATE from the extent buffer
and we have also set the bit EXTENT_BUFFER_WRITE_ERR on it. Later on,
when trying to free the log tree with free_log_tree(), which iterates
over the tree, we can end up getting an -EIO error when trying to read
a node or a leaf, since read_extent_buffer_pages() returns -EIO if an
extent buffer does not have EXTENT_BUFFER_UPTODATE set and has the
EXTENT_BUFFER_WRITE_ERR bit set. Getting that -EIO means that we return
immediately as we can not iterate over the entire tree.

In that case we never update the reserved space for an extent buffer in
the respective block group and space_info object.

When this happens we get the following traces when unmounting the fs:

[174957.284509] BTRFS: error (device dm-0) in cleanup_transaction:1913: errno=-5 IO failure
[174957.286497] BTRFS: error (device dm-0) in free_log_tree:3420: errno=-5 IO failure
[174957.399379] ------------[ cut here ]------------
[174957.402497] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:127 btrfs_put_block_group+0x77/0xb0 [btrfs]
[174957.407523] Modules linked in: btrfs overlay dm_zero (...)
[174957.424917] CPU: 2 PID: 3206883 Comm: umount Tainted: G        W         5.16.0-rc5-btrfs-next-109 #1
[174957.426689] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[174957.428716] RIP: 0010:btrfs_put_block_group+0x77/0xb0 [btrfs]
[174957.429717] Code: 21 48 8b bd (...)
[174957.432867] RSP: 0018:ffffb70d41cffdd0 EFLAGS: 00010206
[174957.433632] RAX: 0000000000000001 RBX: ffff8b09c3848000 RCX: ffff8b0758edd1c8
[174957.434689] RDX: 0000000000000001 RSI: ffffffffc0b467e7 RDI: ffff8b0758edd000
[174957.436068] RBP: ffff8b0758edd000 R08: 0000000000000000 R09: 0000000000000000
[174957.437114] R10: 0000000000000246 R11: 0000000000000000 R12: ffff8b09c3848148
[174957.438140] R13: ffff8b09c3848198 R14: ffff8b0758edd188 R15: dead000000000100
[174957.439317] FS:  00007f328fb82800(0000) GS:ffff8b0a2d200000(0000) knlGS:0000000000000000
[174957.440402] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[174957.441164] CR2: 00007fff13563e98 CR3: 0000000404f4e005 CR4: 0000000000370ee0
[174957.442117] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[174957.443076] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[174957.443948] Call Trace:
[174957.444264]  <TASK>
[174957.444538]  btrfs_free_block_groups+0x255/0x3c0 [btrfs]
[174957.445238]  close_ctree+0x301/0x357 [btrfs]
[174957.445803]  ? call_rcu+0x16c/0x290
[174957.446250]  generic_shutdown_super+0x74/0x120
[174957.446832]  kill_anon_super+0x14/0x30
[174957.447305]  btrfs_kill_super+0x12/0x20 [btrfs]
[174957.447890]  deactivate_locked_super+0x31/0xa0
[174957.448440]  cleanup_mnt+0x147/0x1c0
[174957.448888]  task_work_run+0x5c/0xa0
[174957.449336]  exit_to_user_mode_prepare+0x1e5/0x1f0
[174957.449934]  syscall_exit_to_user_mode+0x16/0x40
[174957.450512]  do_syscall_64+0x48/0xc0
[174957.450980]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[174957.451605] RIP: 0033:0x7f328fdc4a97
[174957.452059] Code: 03 0c 00 f7 (...)
[174957.454320] RSP: 002b:00007fff13564ec8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[174957.455262] RAX: 0000000000000000 RBX: 00007f328feea264 RCX: 00007f328fdc4a97
[174957.456131] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000560b8ae51dd0
[174957.457118] RBP: 0000560b8ae51ba0 R08: 0000000000000000 R09: 00007fff13563c40
[174957.458005] R10: 00007f328fe49fc0 R11: 0000000000000246 R12: 0000000000000000
[174957.459113] R13: 0000560b8ae51dd0 R14: 0000560b8ae51cb0 R15: 0000000000000000
[174957.460193]  </TASK>
[174957.460534] irq event stamp: 0
[174957.461003] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[174957.461947] hardirqs last disabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.463147] softirqs last  enabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.465116] softirqs last disabled at (0): [<0000000000000000>] 0x0
[174957.466323] ---[ end trace bc7ee0c490bce3af ]---
[174957.467282] ------------[ cut here ]------------
[174957.468184] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:3976 btrfs_free_block_groups+0x330/0x3c0 [btrfs]
[174957.470066] Modules linked in: btrfs overlay dm_zero (...)
[174957.483137] CPU: 2 PID: 3206883 Comm: umount Tainted: G        W         5.16.0-rc5-btrfs-next-109 #1
[174957.484691] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[174957.486853] RIP: 0010:btrfs_free_block_groups+0x330/0x3c0 [btrfs]
[174957.488050] Code: 00 00 00 ad de (...)
[174957.491479] RSP: 0018:ffffb70d41cffde0 EFLAGS: 00010206
[174957.492520] RAX: ffff8b08d79310b0 RBX: ffff8b09c3848000 RCX: 0000000000000000
[174957.493868] RDX: 0000000000000001 RSI: fffff443055ee600 RDI: ffffffffb1131846
[174957.495183] RBP: ffff8b08d79310b0 R08: 0000000000000000 R09: 0000000000000000
[174957.496580] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8b08d7931000
[174957.498027] R13: ffff8b09c38492b0 R14: dead000000000122 R15: dead000000000100
[174957.499438] FS:  00007f328fb82800(0000) GS:ffff8b0a2d200000(0000) knlGS:0000000000000000
[174957.500990] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[174957.502117] CR2: 00007fff13563e98 CR3: 0000000404f4e005 CR4: 0000000000370ee0
[174957.503513] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[174957.504864] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[174957.506167] Call Trace:
[174957.506654]  <TASK>
[174957.507047]  close_ctree+0x301/0x357 [btrfs]
[174957.507867]  ? call_rcu+0x16c/0x290
[174957.508567]  generic_shutdown_super+0x74/0x120
[174957.509447]  kill_anon_super+0x14/0x30
[174957.510194]  btrfs_kill_super+0x12/0x20 [btrfs]
[174957.511123]  deactivate_locked_super+0x31/0xa0
[174957.511976]  cleanup_mnt+0x147/0x1c0
[174957.512610]  task_work_run+0x5c/0xa0
[174957.513309]  exit_to_user_mode_prepare+0x1e5/0x1f0
[174957.514231]  syscall_exit_to_user_mode+0x16/0x40
[174957.515069]  do_syscall_64+0x48/0xc0
[174957.515718]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[174957.516688] RIP: 0033:0x7f328fdc4a97
[174957.517413] Code: 03 0c 00 f7 d8 (...)
[174957.521052] RSP: 002b:00007fff13564ec8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[174957.522514] RAX: 0000000000000000 RBX: 00007f328feea264 RCX: 00007f328fdc4a97
[174957.523950] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000560b8ae51dd0
[174957.525375] RBP: 0000560b8ae51ba0 R08: 0000000000000000 R09: 00007fff13563c40
[174957.526763] R10: 00007f328fe49fc0 R11: 0000000000000246 R12: 0000000000000000
[174957.528058] R13: 0000560b8ae51dd0 R14: 0000560b8ae51cb0 R15: 0000000000000000
[174957.529404]  </TASK>
[174957.529843] irq event stamp: 0
[174957.530256] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[174957.531061] hardirqs last disabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.532075] softirqs last  enabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.533083] softirqs last disabled at (0): [<0000000000000000>] 0x0
[174957.533865] ---[ end trace bc7ee0c490bce3b0 ]---
[174957.534452] BTRFS info (device dm-0): space_info 4 has 1070841856 free, is not full
[174957.535404] BTRFS info (device dm-0): space_info total=1073741824, used=2785280, pinned=0, reserved=49152, may_use=0, readonly=65536 zone_unusable=0
[174957.537029] BTRFS info (device dm-0): global_block_rsv: size 0 reserved 0
[174957.537859] BTRFS info (device dm-0): trans_block_rsv: size 0 reserved 0
[174957.538697] BTRFS info (device dm-0): chunk_block_rsv: size 0 reserved 0
[174957.539552] BTRFS info (device dm-0): delayed_block_rsv: size 0 reserved 0
[174957.540403] BTRFS info (device dm-0): delayed_refs_rsv: size 0 reserved 0

This also means that in case we have log tree extent buffers that are
still dirty, we can end up not cleaning them up in case we find an
extent buffer with EXTENT_BUFFER_WRITE_ERR set on it, as in that case
we have no way for iterating over the rest of the tree.

This issue is very often triggered with test cases generic/475 and
generic/648 from fstests.

The issue could almost be fixed by iterating over the io tree attached to
each log root which keeps tracks of the range of allocated extent buffers,
log_root->dirty_log_pages, however that does not work and has some
inconveniences:

1) After we sync the log, we clear the range of the extent buffers from
   the io tree, so we can't find them after writeback. We could keep the
   ranges in the io tree, with a separate bit to signal they represent
   extent buffers already written, but that means we need to hold into
   more memory until the transaction commits.

   How much more memory is used depends a lot on whether we are able to
   allocate contiguous extent buffers on disk (and how often) for a log
   tree - if we are able to, then a single extent state record can
   represent multiple extent buffers, otherwise we need multiple extent
   state record structures to track each extent buffer.
   In fact, my earlier approach did that:

   https://lore.kernel.org/linux-btrfs/3aae7c6728257c7ce2279d6660ee2797e5e34bbd.1641300250.git.fdmanana@suse.com/

   However that can cause a very significant negative impact on
   performance, not only due to the extra memory usage but also because
   we get a larger and deeper dirty_log_pages io tree.
   We got a report that, on beefy machines at least, we can get such
   performance drop with fsmark for example:

   https://lore.kernel.org/linux-btrfs/20220117082426.GE32491@xsang-OptiPlex-9020/

2) We would be doing it only to deal with an unexpected and exceptional
   case, which is basically failure to read an extent buffer from disk
   due to IO failures. On a healthy system we don't expect transaction
   aborts to happen after all;

3) Instead of relying on iterating the log tree or tracking the ranges
   of extent buffers in the dirty_log_pages io tree, using the radix
   tree that tracks extent buffers (fs_info->buffer_radix) to find all
   log tree extent buffers is not reliable either, because after writeback
   of an extent buffer it can be evicted from memory by the release page
   callback of the btree inode (btree_releasepage()).

Since there's no way to be able to properly cleanup a log tree without
being able to read its extent buffers from disk and without using more
memory to track the logical ranges of the allocated extent buffers do
the following:

1) When we fail to cleanup a log tree, setup a flag that indicates that
   failure;

2) Trigger writeback of all log tree extent buffers that are still dirty,
   and wait for the writeback to complete. This is just to cleanup their
   state, page states, page leaks, etc;

3) When unmounting the fs, ignore if the number of bytes reserved in a
   block group and in a space_info is not 0 if, and only if, we failed to
   cleanup a log tree. Also ignore only for metadata block groups and the
   metadata space_info object.

This is far from a perfect solution, but it serves to silence test
failures such as those from generic/475 and generic/648. However having
a non-zero value for the reserved bytes counters on unmount after a
transaction abort, is not such a terrible thing and it's completely
harmless, it does not affect the filesystem integrity in any way.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoperf symbols: Fix symbol size calculation condition
Michael Petlan [Thu, 17 Mar 2022 13:55:36 +0000 (14:55 +0100)]
perf symbols: Fix symbol size calculation condition

commit 3cf6a32f3f2a45944dd5be5c6ac4deb46bcd3bee upstream.

Before this patch, the symbol end address fixup to be called, needed two
conditions being met:

  if (prev->end == prev->start && prev->end != curr->start)

Where
  "prev->end == prev->start" means that prev is zero-long
                             (and thus needs a fixup)
and
  "prev->end != curr->start" means that fixup hasn't been applied yet

However, this logic is incorrect in the following situation:

*curr  = {rb_node = {__rb_parent_color = 278218928,
  rb_right = 0x0, rb_left = 0x0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 40, type = 2 '\002',
  binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}

*prev = {rb_node = {__rb_parent_color = 278219041,
  rb_right = 0x109548b0, rb_left = 0x109547c0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 12, type = 2 '\002',
  binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1095486e "optinsn_slot"}

In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.

After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.

Fixes: 3b01a413c196c910 ("perf symbols: Improve kallsyms symbol end addr calculation")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoInput: aiptek - properly check endpoint type
Pavel Skripkin [Mon, 14 Mar 2022 05:56:32 +0000 (22:56 -0700)]
Input: aiptek - properly check endpoint type

commit 5600f6986628dde8881734090588474f54a540a8 upstream.

Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. There was a check for the number of endpoints, but not
for the type of endpoint.

Fix it by replacing old desc.bNumEndpoints check with
usb_find_common_endpoints() helper for finding endpoints

Fail log:

usb 5-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Workqueue: usb_hub_wq hub_event
...
Call Trace:
 <TASK>
 aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830
 input_open_device+0x1bb/0x320 drivers/input/input.c:629
 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593

Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints")
Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoscsi: mpt3sas: Page fault in reply q processing
Matt Lupfer [Tue, 8 Mar 2022 15:27:02 +0000 (15:27 +0000)]
scsi: mpt3sas: Page fault in reply q processing

commit 69ad4ef868c1fc7609daa235dfa46d28ba7a3ba3 upstream.

A page fault was encountered in mpt3sas on a LUN reset error path:

[  145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0)
[  145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2)
[  145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2)
[  145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00
[  145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0)
[  145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0)
[  149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002)
[  149.875202] BUG: unable to handle page fault for address: 00000007fffc445d
[  149.885617] #PF: supervisor read access in kernel mode
[  149.894346] #PF: error_code(0x0000) - not-present page
[  149.903123] PGD 0 P4D 0
[  149.909387] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  149.917417] CPU: 24 PID: 3512 Comm: scsi_eh_1 Kdump: loaded Tainted: G S         O      5.10.89-altav-1 #1
[  149.934327] Hardware name: DDN           200NVX2             /200NVX2-MB          , BIOS ATHG2.2.02.01 09/10/2021
[  149.951871] RIP: 0010:_base_process_reply_queue+0x4b/0x900 [mpt3sas]
[  149.961889] Code: 0f 84 22 02 00 00 8d 48 01 49 89 fd 48 8d 57 38 f0 0f b1 4f 38 0f 85 d8 01 00 00 49 8b 45 10 45 31 e4 41 8b 55 0c 48 8d 1c d0 <0f> b6 03 83 e0 0f 3c 0f 0f 85 a2 00 00 00 e9 e6 01 00 00 0f b7 ee
[  149.991952] RSP: 0018:ffffc9000f1ebcb8 EFLAGS: 00010246
[  150.000937] RAX: 0000000000000055 RBX: 00000007fffc445d RCX: 000000002548f071
[  150.011841] RDX: 00000000ffff8881 RSI: 0000000000000001 RDI: ffff888125ed50d8
[  150.022670] RBP: 0000000000000000 R08: 0000000000000000 R09: c0000000ffff7fff
[  150.033445] R10: ffffc9000f1ebb68 R11: ffffc9000f1ebb60 R12: 0000000000000000
[  150.044204] R13: ffff888125ed50d8 R14: 0000000000000080 R15: 34cdc00034cdea80
[  150.054963] FS:  0000000000000000(0000) GS:ffff88dfaf200000(0000) knlGS:0000000000000000
[  150.066715] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  150.076078] CR2: 00000007fffc445d CR3: 000000012448a006 CR4: 0000000000770ee0
[  150.086887] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  150.097670] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  150.108323] PKRU: 55555554
[  150.114690] Call Trace:
[  150.120497]  ? printk+0x48/0x4a
[  150.127049]  mpt3sas_scsih_issue_tm.cold.114+0x2e/0x2b3 [mpt3sas]
[  150.136453]  mpt3sas_scsih_issue_locked_tm+0x86/0xb0 [mpt3sas]
[  150.145759]  scsih_dev_reset+0xea/0x300 [mpt3sas]
[  150.153891]  scsi_eh_ready_devs+0x541/0x9e0 [scsi_mod]
[  150.162206]  ? __scsi_host_match+0x20/0x20 [scsi_mod]
[  150.170406]  ? scsi_try_target_reset+0x90/0x90 [scsi_mod]
[  150.178925]  ? blk_mq_tagset_busy_iter+0x45/0x60
[  150.186638]  ? scsi_try_target_reset+0x90/0x90 [scsi_mod]
[  150.195087]  scsi_error_handler+0x3a5/0x4a0 [scsi_mod]
[  150.203206]  ? __schedule+0x1e9/0x610
[  150.209783]  ? scsi_eh_get_sense+0x210/0x210 [scsi_mod]
[  150.217924]  kthread+0x12e/0x150
[  150.224041]  ? kthread_worker_fn+0x130/0x130
[  150.231206]  ret_from_fork+0x1f/0x30

This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q
pointer outside of the list_for_each_entry() loop. At the end of the full
list traversal the pointer is invalid.

Move the _base_process_reply_queue() call inside of the loop.

Link: https://lore.kernel.org/r/d625deae-a958-0ace-2ba3-0888dd0a415b@ddn.com
Fixes: 711a923c14d9 ("scsi: mpt3sas: Postprocessing of target and LUN reset")
Cc: stable@vger.kernel.org
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Matt Lupfer <mlupfer@ddn.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agousb: usbtmc: Fix bug in pipe direction for control transfers
Alan Stern [Thu, 3 Mar 2022 21:00:17 +0000 (16:00 -0500)]
usb: usbtmc: Fix bug in pipe direction for control transfers

commit e9b667a82cdcfe21d590344447d65daed52b353b upstream.

The syzbot fuzzer reported a minor bug in the usbtmc driver:

usb 5-1: BOGUS control dir, pipe 80001e80 doesn't match bRequestType 0
WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412
usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted
5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0
...
Call Trace:
 <TASK>
 usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58
 usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
 usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153
 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline]

The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for
all of its transfers, whether they are in or out.  It's easy to fix.

CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+a48e3d1a875240cab5de@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YiEsYTPEE6lOCOA5@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agousb: gadget: Fix use-after-free bug by not setting udc->dev.driver
Alan Stern [Sun, 6 Mar 2022 02:47:22 +0000 (21:47 -0500)]
usb: gadget: Fix use-after-free bug by not setting udc->dev.driver

commit 16b1941eac2bd499f065a6739a40ce0011a3d740 upstream.

The syzbot fuzzer found a use-after-free bug:

BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320
Read of size 8 at addr ffff88802b934098 by task udevd/3689

CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 dev_uevent+0x712/0x780 drivers/base/core.c:2320
 uevent_show+0x1b8/0x380 drivers/base/core.c:2391
 dev_attr_show+0x4b/0x90 drivers/base/core.c:2094

Although the bug manifested in the driver core, the real cause was a
race with the gadget core.  dev_uevent() does:

if (dev->driver)
add_uevent_var(env, "DRIVER=%s", dev->driver->name);

and between the test and the dereference of dev->driver, the gadget
core sets dev->driver to NULL.

The race wouldn't occur if the gadget core registered its devices on
a real bus, using the standard synchronization techniques of the
driver core.  However, it's not necessary to make such a large change
in order to fix this bug; all we need to do is make sure that
udc->dev.driver is always NULL.

In fact, there is no reason for udc->dev.driver ever to be set to
anything, let alone to the value it currently gets: the address of the
gadget's driver.  After all, a gadget driver only knows how to manage
a gadget, not how to manage a UDC.

This patch simply removes the statements in the gadget core that touch
udc->dev.driver.

Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class")
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+348b571beb5eeb70a582@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YiQgukfFFbBnwJ/9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agousb: gadget: rndis: prevent integer overflow in rndis_set_response()
Dan Carpenter [Tue, 1 Mar 2022 08:04:24 +0000 (11:04 +0300)]
usb: gadget: rndis: prevent integer overflow in rndis_set_response()

commit 65f3324f4b6fed78b8761c3b74615ecf0ffa81fa upstream.

If "BufOffset" is very large the "BufOffset + 8" operation can have an
integer overflow.

Cc: stable@kernel.org
Fixes: 38ea1eac7d88 ("usb: gadget: rndis: check size of RNDIS_MSG_SET command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220301080424.GA17208@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoarm64: fix clang warning about TRAMP_VALIAS
Arnd Bergmann [Wed, 16 Mar 2022 18:38:18 +0000 (19:38 +0100)]
arm64: fix clang warning about TRAMP_VALIAS

[ Upstream commit 7f34b43e07cb512b28543fdcb9f35d1fbfda9ebc ]

The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:

arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
                return (char *)TRAMP_VALIAS + SZ_2K * slot;

Change the addition to something clang does not complain about.

Fixes: bd09128d16fa ("arm64: Add percpu vectors for EL1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoiavf: Fix hang during reboot/shutdown
Ivan Vecera [Thu, 17 Mar 2022 10:45:24 +0000 (11:45 +0100)]
iavf: Fix hang during reboot/shutdown

[ Upstream commit b04683ff8f0823b869c219c78ba0d974bddea0b5 ]

Recent commit 974578017fc1 ("iavf: Add waiting so the port is
initialized in remove") adds a wait-loop at the beginning of
iavf_remove() to ensure that port initialization is finished
prior unregistering net device. This causes a regression
in reboot/shutdown scenario because in this case callback
iavf_shutdown() is called and this callback detaches the device,
makes it down if it is running and sets its state to __IAVF_REMOVE.
Later shutdown callback of associated PF driver (e.g. ice_shutdown)
is called. That callback calls among other things sriov_disable()
that calls indirectly iavf_remove() (see stack trace below).
As the adapter state is already __IAVF_REMOVE then the mentioned
loop is end-less and shutdown process hangs.

The patch fixes this by checking adapter's state at the beginning
of iavf_remove() and skips the rest of the function if the adapter
is already in remove state (shutdown is in progress).

Reproducer:
1. Create VF on PF driven by ice or i40e driver
2. Ensure that the VF is bound to iavf driver
3. Reboot

[52625.981294] sysrq: SysRq : Show Blocked State
[52625.988377] task:reboot          state:D stack:    0 pid:17359 ppid:     1 f2
[52625.996732] Call Trace:
[52625.999187]  __schedule+0x2d1/0x830
[52626.007400]  schedule+0x35/0xa0
[52626.010545]  schedule_hrtimeout_range_clock+0x83/0x100
[52626.020046]  usleep_range+0x5b/0x80
[52626.023540]  iavf_remove+0x63/0x5b0 [iavf]
[52626.027645]  pci_device_remove+0x3b/0xc0
[52626.031572]  device_release_driver_internal+0x103/0x1f0
[52626.036805]  pci_stop_bus_device+0x72/0xa0
[52626.040904]  pci_stop_and_remove_bus_device+0xe/0x20
[52626.045870]  pci_iov_remove_virtfn+0xba/0x120
[52626.050232]  sriov_disable+0x2f/0xe0
[52626.053813]  ice_free_vfs+0x7c/0x340 [ice]
[52626.057946]  ice_remove+0x220/0x240 [ice]
[52626.061967]  ice_shutdown+0x16/0x50 [ice]
[52626.065987]  pci_device_shutdown+0x34/0x60
[52626.070086]  device_shutdown+0x165/0x1c5
[52626.074011]  kernel_restart+0xe/0x30
[52626.077593]  __do_sys_reboot+0x1d2/0x210
[52626.093815]  do_syscall_64+0x5b/0x1a0
[52626.097483]  entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://lore.kernel.org/r/20220317104524.2802848-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
Vladimir Oltean [Wed, 16 Mar 2022 19:21:17 +0000 (21:21 +0200)]
net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload

[ Upstream commit 8e0341aefcc9133f3f48683873284b169581315b ]

ACL rules can be offloaded to VCAP IS2 either through chain 0, or, since
the blamed commit, through a chain index whose number encodes a specific
PAG (Policy Action Group) and lookup number.

The chain number is translated through ocelot_chain_to_pag() into a PAG,
and through ocelot_chain_to_lookup() into a lookup number.

The problem with the blamed commit is that the above 2 functions don't
have special treatment for chain 0. So ocelot_chain_to_pag(0) returns
filter->pag = 224, which is in fact -32, but the "pag" field is an u8.

So we end up programming the hardware with VCAP IS2 entries having a PAG
of 224. But the way in which the PAG works is that it defines a subset
of VCAP IS2 filters which should match on a packet. The default PAG is
0, and previous VCAP IS1 rules (which we offload using 'goto') can
modify it. So basically, we are installing filters with a PAG on which
no packet will ever match. This is the hardware equivalent of adding
filters to a chain which has no 'goto' to it.

Restore the previous functionality by making ACL filters offloaded to
chain 0 go to PAG 0 and lookup number 0. The choice of PAG is clearly
correct, but the choice of lookup number isn't "as before" (which was to
leave the lookup a "don't care"). However, lookup 0 should be fine,
since even though there are ACL actions (policers) which have a
requirement to be used in a specific lookup, that lookup is 0.

Fixes: 226e9cd82a96 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220316192117.2568261-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: bcmgenet: skip invalid partial checksums
Doug Berger [Thu, 17 Mar 2022 01:28:12 +0000 (18:28 -0700)]
net: bcmgenet: skip invalid partial checksums

[ Upstream commit 0f643c88c8d240eba0ea25c2e095a46515ff46e9 ]

The RXCHK block will return a partial checksum of 0 if it encounters
a problem while receiving a packet. Since a 1's complement sum can
only produce this result if no bits are set in the received data
stream it is fair to treat it as an invalid partial checksum and
not pass it up the stack.

Fixes: 810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220317012812.1313196-1-opendmb@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agobnx2x: fix built-in kernel driver load failure
Manish Chopra [Wed, 16 Mar 2022 21:46:13 +0000 (14:46 -0700)]
bnx2x: fix built-in kernel driver load failure

[ Upstream commit 424e7834e293936a54fcf05173f2884171adc5a3 ]

Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
added request_firmware() logic in probe() which caused
load failure when firmware file is not present in initrd (below),
as access to firmware file is not feasible during probe.

  Direct firmware load for bnx2x/bnx2x-e2-7.13.15.0.fw failed with error -2
  Direct firmware load for bnx2x/bnx2x-e2-7.13.21.0.fw failed with error -2

This patch fixes this issue by -

1. Removing request_firmware() logic from the probe()
   such that .ndo_open() handle it as it used to handle
   it earlier

2. Given request_firmware() is removed from probe(), so
   driver has to relax FW version comparisons a bit against
   the already loaded FW version (by some other PFs of same
   adapter) to allow different compatible/close enough FWs with which
   multiple PFs may run with (in different environments), as the
   given PF who is in probe flow has no idea now with which firmware
   file version it is going to initialize the device in ndo_open()

Link: https://lore.kernel.org/all/46f2d9d9-ae7f-b332-ddeb-b59802be2bab@molgen.mpg.de/
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220316214613.6884-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: phy: mscc: Add MODULE_FIRMWARE macros
Juerg Haefliger [Wed, 16 Mar 2022 15:18:35 +0000 (16:18 +0100)]
net: phy: mscc: Add MODULE_FIRMWARE macros

[ Upstream commit f1858c277ba40172005b76a31e6bb931bfc19d9c ]

The driver requires firmware so define MODULE_FIRMWARE so that modinfo
provides the details.

Fixes: fa164e40c53b ("net: phy: mscc: split the driver into separate files")
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: dsa: Add missing of_node_put() in dsa_port_parse_of
Miaoqian Lin [Wed, 16 Mar 2022 08:26:02 +0000 (08:26 +0000)]
net: dsa: Add missing of_node_put() in dsa_port_parse_of

[ Upstream commit cb0b430b4e3acc88c85e0ad2e25f2a25a5765262 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: 6d4e5c570c2d ("net: dsa: get port type at parse time")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316082602.10785-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
Thomas Zimmermann [Tue, 15 Mar 2022 08:45:59 +0000 (09:45 +0100)]
drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS

[ Upstream commit 3c3384050d68570f9de0fec9e58824decfefba7a ]

Fix a number of undefined references to drm_kms_helper.ko in
drm_dp_helper.ko:

  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state':
  drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work':
  drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work':
  drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work':
  drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event'

This happens if panel-edp.ko has been configured with

  DRM_PANEL_EDP=y
  DRM_DP_HELPER=y
  DRM_KMS_HELPER=m

which builds DP helpers into the kernel and KMS helpers sa a module.
Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem.

To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't
make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge
drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers
cannot be selected directly by the user, config symbols should avoid
depending on it anyway.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 3755d35ee1d2 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Brian Masney <bmasney@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/478296/
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()
Nicolas Dichtel [Tue, 15 Mar 2022 09:20:08 +0000 (10:20 +0100)]
net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()

[ Upstream commit 4ee06de7729d795773145692e246a06448b1eb7a ]

This kind of interface doesn't have a mac header. This patch fixes
bpf_redirect() to a PIM interface.

Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/panel: simple: Fix Innolux G070Y2-L01 BPP settings
Marek Vasut [Sun, 20 Feb 2022 04:07:18 +0000 (05:07 +0100)]
drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings

[ Upstream commit fc1b6ef7bfb3d1d4df868b1c3e0480cacda6cd81 ]

The Innolux G070Y2-L01 supports two modes of operation:
1) FRC=Low/NC ... MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ... BPP=6
2) FRC=High ..... MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ... BPP=8

Currently the panel description mixes both, BPP from 1) and bus
format from 2), which triggers a warning at panel-simple.c:615.

Pick the later, set bpp=8, fix the warning.

Fixes: a5d2ade627dca ("drm/panel: simple: Add support for Innolux G070Y2-L01")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220220040718.532866-1-marex@denx.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
Christoph Niedermaier [Tue, 1 Feb 2022 11:36:43 +0000 (12:36 +0100)]
drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()

[ Upstream commit 6061806a863e8b65b109eb06a280041cc7525442 ]

If display timings were read from the devicetree using
of_get_display_timing() and pixelclk-active is defined
there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is
automatically generated. Through the function
drm_bus_flags_from_videomode() e.g. called in the
panel-simple driver this flag got into the bus flags,
but then in imx_pd_bridge_atomic_check() the bus flag
check failed and will not initialize the display. The
original commit fe141cedc433 does not explain why this
check was introduced. So remove the bus flags check,
because it stops the initialization of the display with
valid bus flags.

Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when available")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
To: dri-devel@lists.freedesktop.org
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201113643.4638-1-cniedermaier@dh-electronics.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agohv_netvsc: Add check for kvmalloc_array
Jiasheng Jiang [Mon, 14 Mar 2022 02:01:25 +0000 (10:01 +0800)]
hv_netvsc: Add check for kvmalloc_array

[ Upstream commit 886e44c9298a6b428ae046e2fa092ca52e822e6a ]

As the potential failure of the kvmalloc_array(),
it should be better to check and restore the 'data'
if fails in order to avoid the dereference of the
NULL pointer.

Fixes: 6ae746711263 ("hv_netvsc: Add per-cpu ethtool stats for netvsc")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220314020125.2365084-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoiavf: Fix double free in iavf_reset_task
Przemyslaw Patynowski [Wed, 9 Mar 2022 15:37:39 +0000 (16:37 +0100)]
iavf: Fix double free in iavf_reset_task

[ Upstream commit 16b2dd8cdf6f4e0597c34899de74b4d012b78188 ]

Fix double free possibility in iavf_disable_vf, as crit_lock is
freed in caller, iavf_reset_task. Add kernel-doc for iavf_disable_vf.
Remove mutex_unlock in iavf_disable_vf.
Without this patch there is double free scenario, when calling
iavf_reset_task.

Fixes: e85ff9c631e1 ("iavf: Fix deadlock in iavf_reset_task")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoatm: eni: Add check for dma_map_single
Jiasheng Jiang [Mon, 14 Mar 2022 01:34:48 +0000 (09:34 +0800)]
atm: eni: Add check for dma_map_single

[ Upstream commit 0f74b29a4f53627376cf5a5fb7b0b3fa748a0b2b ]

As the potential failure of the dma_map_single(),
it should be better to check it and return error
if fails.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet/packet: fix slab-out-of-bounds access in packet_recvmsg()
Eric Dumazet [Sat, 12 Mar 2022 23:29:58 +0000 (15:29 -0800)]
net/packet: fix slab-out-of-bounds access in packet_recvmsg()

[ Upstream commit c700525fcc06b05adfea78039de02628af79e07a ]

syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH
and mmap operations, tpacket_rcv() is queueing skbs with
garbage in skb->cb[], triggering a too big copy [1]

Presumably, users of af_packet using mmap() already gets correct
metadata from the mapped buffer, we can simply make sure
to clear 12 bytes that might be copied to user space later.

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline]
BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631

CPU: 0 PID: 3631 Comm: syz-executor233 Not tainted 5.17.0-rc7-syzkaller-02396-g0b3660695e80 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0xf/0x336 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
 memcpy+0x39/0x60 mm/kasan/shadow.c:66
 memcpy include/linux/fortify-string.h:225 [inline]
 packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_recvmsg net/socket.c:962 [inline]
 ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632
 ___sys_recvmsg+0x127/0x200 net/socket.c:2674
 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fdfd5954c29
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcf8e71e48 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdfd5954c29
RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000005
RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffcf8e71e60
R13: 00000000000f4240 R14: 000000000000c1ff R15: 00007ffcf8e71e54
 </TASK>

addr ffffc9000385fb78 is located in stack of task syz-executor233/3631 at offset 32 in frame:
 ____sys_recvmsg+0x0/0x600 include/linux/uio.h:246

this frame has 1 object:
 [32, 160) 'addr'

Memory state around the buggy address:
 ffffc9000385fa80: 00 04 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00
 ffffc9000385fb00: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
>ffffc9000385fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3
                                                                ^
 ffffc9000385fc00: f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 f1
 ffffc9000385fc80: f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2 00 00 00 00 00
==================================================================

Fixes: 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220312232958.3535620-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: phy: marvell: Fix invalid comparison in the resume and suspend functions
Kurt Cancemi [Sat, 12 Mar 2022 20:15:13 +0000 (15:15 -0500)]
net: phy: marvell: Fix invalid comparison in the resume and suspend functions

[ Upstream commit 837d9e49402eaf030db55a49f96fc51d73b4b441 ]

This bug resulted in only the current mode being resumed and suspended when
the PHY supported both fiber and copper modes and when the PHY only supported
copper mode the fiber mode would incorrectly be attempted to be resumed and
suspended.

Fixes: 3758be3dc162 ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.")
Signed-off-by: Kurt Cancemi <kurt@x64architecture.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220312201512.326047-1-kurt@x64architecture.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoesp6: fix check on ipv6_skip_exthdr's return value
Sabrina Dubroca [Thu, 10 Mar 2022 10:49:00 +0000 (11:49 +0100)]
esp6: fix check on ipv6_skip_exthdr's return value

[ Upstream commit 4db4075f92af2b28f415fc979ab626e6b37d67b6 ]

Commit 5f9c55c8066b ("ipv6: check return value of ipv6_skip_exthdr")
introduced an incorrect check, which leads to all ESP packets over
either TCPv6 or UDPv6 encapsulation being dropped. In this particular
case, offset is negative, since skb->data points to the ESP header in
the following chain of headers, while skb->network_header points to
the IPv6 header:

    IPv6 | ext | ... | ext | UDP | ESP | ...

That doesn't seem to be a problem, especially considering that if we
reach esp6_input_done2, we're guaranteed to have a full set of headers
available (otherwise the packet would have been dropped earlier in the
stack). However, it means that the return value will (intentionally)
be negative. We can make the test more specific, as the expected
return value of ipv6_skip_exthdr will be the (negated) size of either
a UDP header, or a TCP header with possible options.

In the future, we should probably either make ipv6_skip_exthdr
explicitly accept negative offsets (and adjust its return value for
error cases), or make ipv6_skip_exthdr only take non-negative
offsets (and audit all callers).

Fixes: 5f9c55c8066b ("ipv6: check return value of ipv6_skip_exthdr")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agovsock: each transport cycles only on its own sockets
Jiyong Park [Fri, 11 Mar 2022 02:00:16 +0000 (11:00 +0900)]
vsock: each transport cycles only on its own sockets

[ Upstream commit 8e6ed963763fe21429eabfc76c69ce2b0163a3dd ]

When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transport.

There actually was an issue caused by this; in a nested VM
configuration, destroying the nested VM (which often involves the
closing of /dev/vhost-vsock if there was h2g connections to the nested
VM) kills not only the h2g connections, but also all existing g2h
connections to the (outmost) host which are totally unrelated.

Tested: Executed the following steps on Cuttlefish (Android running on a
VM) [1]: (1) Enter into an `adb shell` session - to have a g2h
connection inside the VM, (2) open and then close /dev/vhost-vsock by
`exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb
session is not reset.

[1] https://android.googlesource.com/device/google/cuttlefish/

Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiyong Park <jiyong@google.com>
Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoalx: acquire mutex for alx_reinit in alx_change_mtu
Niels Dossche [Thu, 10 Mar 2022 23:27:08 +0000 (00:27 +0100)]
alx: acquire mutex for alx_reinit in alx_change_mtu

[ Upstream commit 46b348fd2d81a341b15fb3f3f986204b038f5c42 ]

alx_reinit has a lockdep assertion that the alx->mtx mutex must be held.
alx_reinit is called from two places: alx_reset and alx_change_mtu.
alx_reset does acquire alx->mtx before calling alx_reinit.
alx_change_mtu does not acquire this mutex, nor do its callers or any
path towards alx_change_mtu.
Acquire the mutex in alx_change_mtu.

The issue was introduced when the fine-grained locking was introduced
to the code to replace the RTNL. The same commit also introduced the
lockdep assertion.

Fixes: 4a5fe57e7751 ("alx: use fine-grained locking instead of RTNL")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220310232707.44251-1-dossche.niels@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoefi: fix return value of __setup handlers
Randy Dunlap [Tue, 1 Mar 2022 04:18:51 +0000 (20:18 -0800)]
efi: fix return value of __setup handlers

[ Upstream commit 9feaf8b387ee0ece9c1d7add308776b502a35d0c ]

When "dump_apple_properties" is used on the kernel boot command line,
it causes an Unknown parameter message and the string is added to init's
argument strings:

  Unknown kernel command line parameters "dump_apple_properties
    BOOT_IMAGE=/boot/bzImage-517rc6 efivar_ssdt=newcpu_ssdt", will be
    passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
     dump_apple_properties
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc6
     efivar_ssdt=newcpu_ssdt

Similarly when "efivar_ssdt=somestring" is used, it is added to the
Unknown parameter message and to init's environment strings, polluting
them (see examples above).

Change the return value of the __setup functions to 1 to indicate
that the __setup options have been handled.

Fixes: 58c5475aba67 ("x86/efi: Retrieve and assign Apple device properties")
Fixes: 475fb4e8b2f4 ("efi / ACPI: load SSTDs from EFI variables")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Link: https://lore.kernel.org/r/20220301041851.12459-1-rdunlap@infradead.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/mgag200: Fix PLL setup for g200wb and g200ew
Jocelyn Falempe [Tue, 8 Mar 2022 17:43:21 +0000 (18:43 +0100)]
drm/mgag200: Fix PLL setup for g200wb and g200ew

commit 40ce1121c1d76daf9048a86e36c83e469281b9fd upstream.

commit f86c3ed55920 ("drm/mgag200: Split PLL setup into compute and
 update functions") introduced a regression for g200wb and g200ew.
The PLLs are not set up properly, and VGA screen stays
black, or displays "out of range" message.

MGA1064_WB_PIX_PLLC_N/M/P was mistakenly replaced with
MGA1064_PIX_PLLC_N/M/P which have different addresses.

Patch tested on a Dell T310 with g200wb

Fixes: f86c3ed55920 ("drm/mgag200: Split PLL setup into compute and update functions")
Cc: stable@vger.kernel.org
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308174321.225606-1-jfalempe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoblock: release rq qos structures for queue without disk
Ming Lei [Mon, 14 Mar 2022 04:30:18 +0000 (12:30 +0800)]
block: release rq qos structures for queue without disk

commit daaca3522a8e67c46e39ef09c1d542e866f85f3b upstream.

blkcg_init_queue() may add rq qos structures to request queue, previously
blk_cleanup_queue() calls rq_qos_exit() to release them, but commit
8e141f9eb803 ("block: drain file system I/O on del_gendisk")
moves rq_qos_exit() into del_gendisk(), so memory leak is caused
because queues may not have disk, such as un-present scsi luns, nvme
admin queue, ...

Fixes the issue by adding rq_qos_exit() to blk_cleanup_queue() back.

BTW, v5.18 won't need this patch any more since we move
blkcg_init_queue()/blkcg_exit_queue() into disk allocation/release
handler, and patches have been in for-5.18/block.

Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Reported-by: syzbot+b42749a851a47a0f581b@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220314043018.177141-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomm: swap: get rid of livelock in swapin readahead
Guo Ziliang [Wed, 16 Mar 2022 23:15:03 +0000 (16:15 -0700)]
mm: swap: get rid of livelock in swapin readahead

commit 029c4628b2eb2ca969e9bf979b05dc18d8d5575e upstream.

In our testing, a livelock task was found.  Through sysrq printing, same
stack was found every time, as follows:

  __swap_duplicate+0x58/0x1a0
  swapcache_prepare+0x24/0x30
  __read_swap_cache_async+0xac/0x220
  read_swap_cache_async+0x58/0xa0
  swapin_readahead+0x24c/0x628
  do_swap_page+0x374/0x8a0
  __handle_mm_fault+0x598/0xd60
  handle_mm_fault+0x114/0x200
  do_page_fault+0x148/0x4d0
  do_translation_fault+0xb0/0xd4
  do_mem_abort+0x50/0xb0

The reason for the livelock is that swapcache_prepare() always returns
EEXIST, indicating that SWAP_HAS_CACHE has not been cleared, so that it
cannot jump out of the loop.  We suspect that the task that clears the
SWAP_HAS_CACHE flag never gets a chance to run.  We try to lower the
priority of the task stuck in a livelock so that the task that clears
the SWAP_HAS_CACHE flag will run.  The results show that the system
returns to normal after the priority is lowered.

In our testing, multiple real-time tasks are bound to the same core, and
the task in the livelock is the highest priority task of the core, so
the livelocked task cannot be preempted.

Although cond_resched() is used by __read_swap_cache_async, it is an
empty function in the preemptive system and cannot achieve the purpose
of releasing the CPU.  A high-priority task cannot release the CPU
unless preempted by a higher-priority task.  But when this task is
already the highest priority task on this core, other tasks will not be
able to be scheduled.  So we think we should replace cond_resched() with
schedule_timeout_uninterruptible(1), schedule_timeout_interruptible will
call set_current_state first to set the task state, so the task will be
removed from the running queue, so as to achieve the purpose of giving
up the CPU and prevent it from running in kernel mode for too long.

(akpm: ugly hack becomes uglier.  But it fixes the issue in a
backportable-to-stable fashion while we hopefully work on something
better)

Link: https://lkml.kernel.org/r/20220221111749.1928222-1-cgel.zte@gmail.com
Signed-off-by: Guo Ziliang <guo.ziliang@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Ziliang Guo <guo.ziliang@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoocfs2: fix crash when initialize filecheck kobj fails
Joseph Qi [Wed, 16 Mar 2022 23:15:09 +0000 (16:15 -0700)]
ocfs2: fix crash when initialize filecheck kobj fails

commit 7b0b1332cfdb94489836b67d088a779699f8e47e upstream.

Once s_root is set, genric_shutdown_super() will be called if
fill_super() fails.  That means, we will call ocfs2_dismount_volume()
twice in such case, which can lead to kernel crash.

Fix this issue by initializing filecheck kobj before setting s_root.

Link: https://lkml.kernel.org/r/20220310081930.86305-1-joseph.qi@linux.alibaba.com
Fixes: 5f483c4abb50 ("ocfs2: add kobject for online file check")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agocrypto: qcom-rng - ensure buffer for generate is completely filled
Brian Masney [Thu, 10 Mar 2022 23:24:59 +0000 (18:24 -0500)]
crypto: qcom-rng - ensure buffer for generate is completely filled

commit a680b1832ced3b5fa7c93484248fd221ea0d614b upstream.

The generate function in struct rng_alg expects that the destination
buffer is completely filled if the function returns 0. qcom_rng_read()
can run into a situation where the buffer is partially filled with
randomness and the remaining part of the buffer is zeroed since
qcom_rng_generate() doesn't check the return value. This issue can
be reproduced by running the following from libkcapi:

    kcapi-rng -b 9000000 > OUTFILE

The generated OUTFILE will have three huge sections that contain all
zeros, and this is caused by the code where the test
'val & PRNG_STATUS_DATA_AVAIL' fails.

Let's fix this issue by ensuring that qcom_rng_read() always returns
with a full buffer if the function returns success. Let's also have
qcom_rng_generate() return the correct value.

Here's some statistics from the ent project
(https://www.fourmilab.ch/random/) that shows information about the
quality of the generated numbers:

    $ ent -c qcom-random-before
    Value Char Occurrences Fraction
      0           606748   0.067416
      1            33104   0.003678
      2            33001   0.003667
    ...
    253   �        32883   0.003654
    254   �        33035   0.003671
    255   �        33239   0.003693

    Total:       9000000   1.000000

    Entropy = 7.811590 bits per byte.

    Optimum compression would reduce the size
    of this 9000000 byte file by 2 percent.

    Chi square distribution for 9000000 samples is 9329962.81, and
    randomly would exceed this value less than 0.01 percent of the
    times.

    Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
    Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
    Serial correlation coefficient is 0.159130 (totally uncorrelated =
    0.0).

Without this patch, the results of the chi-square test is 0.01%, and
the numbers are certainly not random according to ent's project page.
The results improve with this patch:

    $ ent -c qcom-random-after
    Value Char Occurrences Fraction
      0            35432   0.003937
      1            35127   0.003903
      2            35424   0.003936
    ...
    253   �        35201   0.003911
    254   �        34835   0.003871
    255   �        35368   0.003930

    Total:       9000000   1.000000

    Entropy = 7.999979 bits per byte.

    Optimum compression would reduce the size
    of this 9000000 byte file by 0 percent.

    Chi square distribution for 9000000 samples is 258.77, and randomly
    would exceed this value 42.24 percent of the times.

    Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
    Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
    Serial correlation coefficient is 0.000468 (totally uncorrelated =
    0.0).

This change was tested on a Nexus 5 phone (msm8974 SoC).

Signed-off-by: Brian Masney <bmasney@redhat.com>
Fixes: ceec5f5b5988 ("crypto: qcom-rng - Add Qcom prng driver")
Cc: stable@vger.kernel.org # 4.19+
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoLinux 5.15.30
Greg Kroah-Hartman [Sat, 19 Mar 2022 12:47:51 +0000 (13:47 +0100)]
Linux 5.15.30

Link: https://lore.kernel.org/r/20220317124526.308079100@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoice: Fix race condition during interface enslave
Ivan Vecera [Thu, 10 Mar 2022 17:16:41 +0000 (18:16 +0100)]
ice: Fix race condition during interface enslave

commit 5cb1ebdbc4342b1c2ce89516e19808d64417bdbc upstream.

Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.

Reproducer:
```
#!/bin/sh

ip link add lag0 type bond mode 1 miimon 100
ip link set lag0

for n in {1..10}; do
        echo Cycle: $n
        ip link set ens7f0 master lag0
        sleep 1
        ip link set ens7f0 nomaster
done
```

This results in:
[20976.208697] Workqueue: ice ice_service_task [ice]
[20976.213422] Call Trace:
[20976.215871]  __schedule+0x2d1/0x830
[20976.219364]  schedule+0x35/0xa0
[20976.222510]  schedule_preempt_disabled+0xa/0x10
[20976.227043]  __mutex_lock.isra.7+0x310/0x420
[20976.235071]  enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
[20976.251215]  ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
[20976.256192]  ib_cache_setup_one+0x33/0xa0 [ib_core]
[20976.261079]  ib_register_device+0x40d/0x580 [ib_core]
[20976.266139]  irdma_ib_register_device+0x129/0x250 [irdma]
[20976.281409]  irdma_probe+0x2c1/0x360 [irdma]
[20976.285691]  auxiliary_bus_probe+0x45/0x70
[20976.289790]  really_probe+0x1f2/0x480
[20976.298509]  driver_probe_device+0x49/0xc0
[20976.302609]  bus_for_each_drv+0x79/0xc0
[20976.306448]  __device_attach+0xdc/0x160
[20976.310286]  bus_probe_device+0x9d/0xb0
[20976.314128]  device_add+0x43c/0x890
[20976.321287]  __auxiliary_device_add+0x43/0x60
[20976.325644]  ice_plug_aux_dev+0xb2/0x100 [ice]
[20976.330109]  ice_service_task+0xd0c/0xed0 [ice]
[20976.342591]  process_one_work+0x1a7/0x360
[20976.350536]  worker_thread+0x30/0x390
[20976.358128]  kthread+0x10a/0x120
[20976.365547]  ret_from_fork+0x1f/0x40
...
[20976.438030] task:ip              state:D stack:    0 pid:213658 ppid:213627 flags:0x00004084
[20976.446469] Call Trace:
[20976.448921]  __schedule+0x2d1/0x830
[20976.452414]  schedule+0x35/0xa0
[20976.455559]  schedule_preempt_disabled+0xa/0x10
[20976.460090]  __mutex_lock.isra.7+0x310/0x420
[20976.464364]  device_del+0x36/0x3c0
[20976.467772]  ice_unplug_aux_dev+0x1a/0x40 [ice]
[20976.472313]  ice_lag_event_handler+0x2a2/0x520 [ice]
[20976.477288]  notifier_call_chain+0x47/0x70
[20976.481386]  __netdev_upper_dev_link+0x18b/0x280
[20976.489845]  bond_enslave+0xe05/0x1790 [bonding]
[20976.494475]  do_setlink+0x336/0xf50
[20976.502517]  __rtnl_newlink+0x529/0x8b0
[20976.543441]  rtnl_newlink+0x43/0x60
[20976.546934]  rtnetlink_rcv_msg+0x2b1/0x360
[20976.559238]  netlink_rcv_skb+0x4c/0x120
[20976.563079]  netlink_unicast+0x196/0x230
[20976.567005]  netlink_sendmsg+0x204/0x3d0
[20976.570930]  sock_sendmsg+0x4c/0x50
[20976.574423]  ____sys_sendmsg+0x1eb/0x250
[20976.586807]  ___sys_sendmsg+0x7c/0xc0
[20976.606353]  __sys_sendmsg+0x57/0xa0
[20976.609930]  do_syscall_64+0x5b/0x1a0
[20976.613598]  entry_SYSCALL_64_after_hwframe+0x65/0xca

1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
   is called from ice_service_task() context, aux device is created
   and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
   RTNL lock and that notifier calls ice_unplug_aux_dev(). That
   function tries to take aux device->lock but this is already taken
   by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
   taken in step 2
4. Dead-lock

The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
  call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
  then ice_unplug_aux_dev() is called. If it is set (in other words
  plugging of aux device was requested and ice_plug_aux_dev() is
  potentially running) then the function only clears the bit
- Once ice_plug_aux_dev() call (in ice_service_task) is finished
  the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
  whether it was already cleared by ice_clear_rdma_cap(). If so then
  aux device is unplugged.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agox86/module: Fix the paravirt vs alternative order
Peter Zijlstra [Thu, 3 Mar 2022 11:23:23 +0000 (12:23 +0100)]
x86/module: Fix the paravirt vs alternative order

commit 5adf349439d29f92467e864f728dfc23180f3ef9 upstream.

Ever since commit

  4e6292114c74 ("x86/paravirt: Add new features for paravirt patching")

there is an ordering dependency between patching paravirt ops and
patching alternatives, the module loader still violates this.

Fixes: 4e6292114c74 ("x86/paravirt: Add new features for paravirt patching")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220303112825.068773913@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agokselftest/vm: fix tests build with old libc
Chengming Zhou [Sat, 5 Mar 2022 04:29:04 +0000 (20:29 -0800)]
kselftest/vm: fix tests build with old libc

[ Upstream commit b773827e361952b3f53ac6fa4c4e39ccd632102e ]

The error message when I build vm tests on debian10 (GLIBC 2.28):

    userfaultfd.c: In function `userfaultfd_pagemap_test':
    userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use
    in this function); did you mean `MADV_RANDOM'?
      if (madvise(area_dst, test_pgsize, MADV_PAGEOUT))
                                         ^~~~~~~~~~~~
                                         MADV_RANDOM

This patch includes these newer definitions from UAPI linux/mman.h, is
useful to fix tests build on systems without these definitions in glibc
sys/mman.h.

Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agobnx2: Fix an error message
Christophe JAILLET [Wed, 2 Mar 2022 20:21:15 +0000 (21:21 +0100)]
bnx2: Fix an error message

[ Upstream commit 8ccffe9ac3239e549beaa0a9d5e1a1eac94e866c ]

Fix an error message and report the correct failing function.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agosfc: extend the locking on mcdi->seqno
Niels Dossche [Tue, 1 Mar 2022 22:28:22 +0000 (23:28 +0100)]
sfc: extend the locking on mcdi->seqno

[ Upstream commit f1fb205efb0ccca55626fd4ef38570dd16b44719 ]

seqno could be read as a stale value outside of the lock. The lock is
already acquired to protect the modification of seqno against a possible
race condition. Place the reading of this value also inside this locking
to protect it against a possible race condition.

Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agotcp: make tcp_read_sock() more robust
Eric Dumazet [Wed, 2 Mar 2022 16:17:23 +0000 (08:17 -0800)]
tcp: make tcp_read_sock() more robust

[ Upstream commit e3d5ea2c011ecb16fb94c56a659364e6b30fac94 ]

If recv_actor() returns an incorrect value, tcp_read_sock()
might loop forever.

Instead, issue a one time warning and make sure to make progress.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-2-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonl80211: Update bss channel on channel switch for P2P_CLIENT
Sreeramya Soratkal [Tue, 1 Mar 2022 06:03:20 +0000 (11:33 +0530)]
nl80211: Update bss channel on channel switch for P2P_CLIENT

[ Upstream commit e50b88c4f076242358b66ddb67482b96947438f2 ]

The wdev channel information is updated post channel switch only for
the station mode and not for the other modes. Due to this, the P2P client
still points to the old value though it moved to the new channel
when the channel change is induced from the P2P GO.

Update the bss channel after CSA channel switch completion for P2P client
interface as well.

Signed-off-by: Sreeramya Soratkal <quic_ssramya@quicinc.com>
Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/vrr: Set VRR capable prop only if it is attached to connector
Manasi Navare [Fri, 25 Feb 2022 01:30:54 +0000 (17:30 -0800)]
drm/vrr: Set VRR capable prop only if it is attached to connector

[ Upstream commit 62929726ef0ec72cbbe9440c5d125d4278b99894 ]

VRR capable property is not attached by default to the connector
It is attached only if VRR is supported.
So if the driver tries to call drm core set prop function without
it being attached that causes NULL dereference.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225013055.9282-1-manasi.d.navare@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoiwlwifi: don't advertise TWT support
Golan Ben Ami [Tue, 1 Mar 2022 07:29:26 +0000 (09:29 +0200)]
iwlwifi: don't advertise TWT support

[ Upstream commit 1db5fcbba2631277b78d7f8aff99c9607d29f6d8 ]

Some APs misbehave when TWT is used and cause our firmware to crash.
We don't know a reasonable way to detect and work around this problem
in the FW yet.  To prevent these crashes, disable TWT in the driver by
stopping to advertise TWT support.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
[reworded the commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoatm: firestream: check the return value of ioremap() in fs_init()
Jia-Ju Bai [Fri, 25 Feb 2022 12:52:30 +0000 (04:52 -0800)]
atm: firestream: check the return value of ioremap() in fs_init()

[ Upstream commit d4e26aaea7f82ba884dcb4acfe689406bc092dc3 ]

The function ioremap() in fs_init() can fail, so its return value should
be checked.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agocan: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready
Lad Prabhakar [Mon, 21 Feb 2022 22:59:35 +0000 (22:59 +0000)]
can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready

[ Upstream commit c5048a7b2c23ab589f3476a783bd586b663eda5b ]

Register the CAN device only when all the necessary initialization is
completed. This patch makes sure all the data structures and locks are
initialized before registering the CAN device.

Link: https://lore.kernel.org/all/20220221225935.12300-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoBluetooth: hci_core: Fix leaking sent_cmd skb
Luiz Augusto von Dentz [Fri, 4 Feb 2022 21:12:35 +0000 (13:12 -0800)]
Bluetooth: hci_core: Fix leaking sent_cmd skb

[ Upstream commit dd3b1dc3dd050f1f47cd13e300732852414270f8 ]

sent_cmd memory is not freed before freeing hci_dev causing it to leak
it contents.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSE
Julian Braha [Mon, 17 Jan 2022 04:09:40 +0000 (05:09 +0100)]
ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSE

[ Upstream commit 11c57c3ba94da74c3446924260e34e0b1950b5d7 ]

Resending this to properly add it to the patch tracker - thanks for letting
me know, Arnd :)

When ARM is enabled, and BITREVERSE is disabled,
Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for HAVE_ARCH_BITREVERSE
  Depends on [n]: BITREVERSE [=n]
  Selected by [y]:
  - ARM [=y] && (CPU_32v7M [=n] || CPU_32v7 [=y]) && !CPU_32v6 [=n]

This is because ARM selects HAVE_ARCH_BITREVERSE
without selecting BITREVERSE, despite
HAVE_ARCH_BITREVERSE depending on BITREVERSE.

This unmet dependency bug was found by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoMIPS: smp: fill in sibling and core maps earlier
Alexander Lobakin [Sat, 12 Feb 2022 22:21:11 +0000 (22:21 +0000)]
MIPS: smp: fill in sibling and core maps earlier

[ Upstream commit f2703def339c793674010cc9f01bfe4980231808 ]

After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle),
2-core 2-thread-per-core interAptiv (CPS-driven) started emitting
the following:

[    0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))
[    0.048183] ------------[ cut here ]------------
[    0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240
[    0.048220] Modules linked in:
[    0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f
[    0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1
[    0.048278]         830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000
[    0.048307]         00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000
[    0.048334]         00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34
[    0.048361]         817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933
[    0.048389]         ...
[    0.048396] Call Trace:
[    0.048399] [<8105a7bc>] show_stack+0x3c/0x140
[    0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80
[    0.048440] [<8108b5c0>] __warn+0xc0/0xf4
[    0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c
[    0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240
[    0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80
[    0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140
[    0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140
[    0.048523] [<8106593c>] start_secondary+0xbc/0x280
[    0.048539]
[    0.048543] ---[ end trace 0000000000000000 ]---
[    0.048636] Synchronize counters for CPU 1: done.

...for each but CPU 0/boot.
Basic debug printks right before the mentioned line say:

[    0.048170] CPU: 1, smt_mask:

So smt_mask, which is sibling mask obviously, is empty when entering
the function.
This is critical, as sched_core_cpu_starting() calculates
core-scheduling parameters only once per CPU start, and it's crucial
to have all the parameters filled in at that moment (at least it
uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on
MIPS).

A bit of debugging led me to that set_cpu_sibling_map() performing
the actual map calculation, was being invocated after
notify_cpu_start(), and exactly the latter function starts CPU HP
callback round (sched_core_cpu_starting() is basically a CPU HP
callback).
While the flow is same on ARM64 (maps after the notifier, although
before calling set_cpu_online()), x86 started calculating sibling
maps earlier than starting the CPU HP callbacks in Linux 4.14 (see
[0] for the reference). Neither me nor my brief tests couldn't find
any potential caveats in calculating the maps right after performing
delay calibration, but the WARN splat is now gone.
The very same debug prints now yield exactly what I expected from
them:

[    0.048433] CPU: 1, smt_mask: 0-1

[0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef

Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomac80211: refuse aggregations sessions before authorized
Johannes Berg [Thu, 3 Feb 2022 19:15:29 +0000 (20:15 +0100)]
mac80211: refuse aggregations sessions before authorized

[ Upstream commit a6bce78262f5dd4b50510f0aa47f3995f7b185f3 ]

If an MFP station isn't authorized, the receiver will (or
at least should) drop the action frame since it's a robust
management frame, but if we're not authorized we haven't
installed keys yet. Refuse attempts to start a session as
they'd just time out.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220203201528.ff4d5679dce9.I34bb1f2bc341e161af2d6faf74f91b332ba11285@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoARM: dts: rockchip: fix a typo on rk3288 crypto-controller
Corentin Labbe [Wed, 9 Feb 2022 12:03:55 +0000 (12:03 +0000)]
ARM: dts: rockchip: fix a typo on rk3288 crypto-controller

[ Upstream commit 3916c3619599a3970d3e6f98fb430b7c46266ada ]

crypto-controller had a typo, fix it.
In the same time, rename it to just crypto

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220209120355.1985707-1-clabbe@baylibre.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoARM: dts: rockchip: reorder rk322x hmdi clocks
Sascha Hauer [Thu, 10 Feb 2022 14:23:53 +0000 (15:23 +0100)]
ARM: dts: rockchip: reorder rk322x hmdi clocks

[ Upstream commit be4e65bdffab5f588044325117df77dad7e9c45a ]

The binding specifies the clock order to "iahb", "isfr", "cec". Reorder
the clocks accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220210142353.3420859-1-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg"
Dinh Nguyen [Thu, 6 Jan 2022 23:53:31 +0000 (17:53 -0600)]
arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg"

[ Upstream commit 268a491aebc25e6dc7c618903b09ac3a2e8af530 ]

The DWC2 USB controller on the Agilex platform does not support clock
gating, so use the chip specific "intel,socfpga-agilex-hsotg"
compatible.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: dts: rockchip: reorder rk3399 hdmi clocks
Sascha Hauer [Wed, 26 Jan 2022 14:55:40 +0000 (15:55 +0100)]
arm64: dts: rockchip: reorder rk3399 hdmi clocks

[ Upstream commit 2e8a8b5955a000cc655f7e368670518cbb77fe58 ]

The binding specifies the clock order to "cec", "grf", "vpll". Reorder
the clocks accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220126145549.617165-19-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: dts: rockchip: align pl330 node name with dtschema
Krzysztof Kozlowski [Sat, 29 Jan 2022 17:54:29 +0000 (18:54 +0100)]
arm64: dts: rockchip: align pl330 node name with dtschema

[ Upstream commit 8fd9415042826c7609c588e5ef45f3e84237785f ]

Fixes dtbs_check warnings like:

  dmac@ff240000: $nodename:0: 'dmac@ff240000' does not match '^dma-controller(@.*)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220129175429.298836-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrity
Jakob Unterwurzacher [Wed, 19 Jan 2022 13:49:48 +0000 (14:49 +0100)]
arm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrity

[ Upstream commit 62966cbdda8a92f82d966a45aa671e788b2006f7 ]

There are signal integrity issues running the eMMC at 200MHz on Puma
RK3399-Q7.

Similar to the work-around found for RK3399 Gru boards, lowering the
frequency to 100MHz made the eMMC much more stable, so let's lower the
frequency to 100MHz.

It might be possible to run at 150MHz as on RK3399 Gru boards but only
100MHz was extensively tested.

Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220119134948.1444965-1-quentin.schulz@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoxfrm: Fix xfrm migrate issues when address family changes
Yan Yan [Wed, 19 Jan 2022 00:00:14 +0000 (16:00 -0800)]
xfrm: Fix xfrm migrate issues when address family changes

[ Upstream commit e03c3bba351f99ad932e8f06baa9da1afc418e02 ]

xfrm_migrate cannot handle address family change of an xfrm_state.
The symptons are the xfrm_state will be migrated to a wrong address,
and sending as well as receiving packets wil be broken.

This commit fixes it by breaking the original xfrm_state_clone
method into two steps so as to update the props.family before
running xfrm_init_state. As the result, xfrm_state's inner mode,
outer mode, type and IP header length in xfrm_state_migrate can
be updated with the new address family.

Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/1885354

Signed-off-by: Yan Yan <evitayan@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoxfrm: Check if_id in xfrm_migrate
Yan Yan [Wed, 19 Jan 2022 00:00:13 +0000 (16:00 -0800)]
xfrm: Check if_id in xfrm_migrate

[ Upstream commit c1aca3080e382886e2e58e809787441984a2f89b ]

This patch enables distinguishing SAs and SPs based on if_id during
the xfrm_migrate flow. This ensures support for xfrm interfaces
throughout the SA/SP lifecycle.

When there are multiple existing SPs with the same direction,
the same xfrm_selector and different endpoint addresses,
xfrm_migrate might fail with ENODATA.

Specifically, the code path for performing xfrm_migrate is:
  Stage 1: find policy to migrate with
    xfrm_migrate_policy_find(sel, dir, type, net)
  Stage 2: find and update state(s) with
    xfrm_migrate_state_find(mp, net)
  Stage 3: update endpoint address(es) of template(s) with
    xfrm_policy_migrate(pol, m, num_migrate)

Currently "Stage 1" always returns the first xfrm_policy that
matches, and "Stage 3" looks for the xfrm_tmpl that matches the
old endpoint address. Thus if there are multiple xfrm_policy
with same selector, direction, type and net, "Stage 1" might
rertun a wrong xfrm_policy and "Stage 3" will fail with ENODATA
because it cannot find a xfrm_tmpl with the matching endpoint
address.

The fix is to allow userspace to pass an if_id and add if_id
to the matching rule in Stage 1 and Stage 2 since if_id is a
unique ID for xfrm_policy and xfrm_state. For compatibility,
if_id will only be checked if the attribute is set.

Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/1668886

Signed-off-by: Yan Yan <evitayan@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode
Quentin Schulz [Thu, 20 Jan 2022 12:51:56 +0000 (13:51 +0100)]
arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode

[ Upstream commit ed2c66a95c0c5669880aa93d0d34c6e9694b4cbd ]

The micro USB3.0 port available on the Haikou evaluation kit for Puma
RK3399-Q7 SoM supports dual-role model (aka drd or OTG) but its support
was broken until now because of missing logic around the ID pin.

This adds proper support for USB OTG on Puma Haikou by "connecting" the
GPIO used for USB ID to the USB3 controller device.

Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220120125156.16217-1-quentin.schulz@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoRevert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
Kai Lueke [Thu, 3 Mar 2022 14:55:10 +0000 (15:55 +0100)]
Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"

commit a3d9001b4e287fc043e5539d03d71a32ab114bcb upstream.

This reverts commit 68ac0f3810e76a853b5f7b90601a05c3048b8b54 because ID
0 was meant to be used for configuring the policy/state without
matching for a specific interface (e.g., Cilium is affected, see
https://github.com/cilium/cilium/pull/18789 and
https://github.com/cilium/cilium/pull/19019).

Signed-off-by: Kai Lueke <kailueke@linux.microsoft.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoLinux 5.15.29
Greg Kroah-Hartman [Wed, 16 Mar 2022 13:23:47 +0000 (14:23 +0100)]
Linux 5.15.29

Link: https://lore.kernel.org/r/20220314112743.029192918@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agovhost: allow batching hint without size
Jason Wang [Thu, 10 Mar 2022 07:52:11 +0000 (15:52 +0800)]
vhost: allow batching hint without size

commit 95932ab2ea07b79cdb33121e2f40ccda9e6a73b5 upstream.

Commit e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb
entries") tries to reject the IOTLB message whose size is zero. But
the size is not necessarily meaningful, one example is the batching
hint, so the commit breaks that.

Fixing this be reject zero size message only if the message is used to
update/invalidate the IOTLB.

Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries")
Reported-by: Eli Cohen <elic@nvidia.com>
Cc: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220310075211.4801-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoRevert "net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN"
Vladimir Oltean [Sun, 13 Mar 2022 23:24:59 +0000 (01:24 +0200)]
Revert "net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN"

This reverts commit 2566a89b9e163b2fcd104d6005e0149f197b8a48 which is
commit a2614140dc0f467a83aa3bb4b6ee2d6480a76202 upstream.

The above change depends on upstream commit 0faf890fc519 ("net: dsa:
drop rtnl_lock from dsa_slave_switchdev_event_work"), which is not
present in linux-5.15.y. Without that change, waiting for the switchdev
workqueue causes deadlocks on the rtnl_mutex.

Backporting the dependency commit isn't trivial/desirable, since it
requires that the following dependencies of the dependency are also
backported:

df405910ab9f net: dsa: sja1105: wait for dynamic config command completion on writes too
eb016afd83a9 net: dsa: sja1105: serialize access to the dynamic config interface
2468346c5677 net: mscc: ocelot: serialize access to the MAC table
f7eb4a1c0864 net: dsa: b53: serialize access to the ARL table
cf231b436f7c net: dsa: lantiq_gswip: serialize access to the PCE registers
338a3a4745aa net: dsa: introduce locking for the address lists on CPU and DSA ports

and then this bugfix on top:

8940e6b669ca ("net: dsa: avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held")

Reported-by: Daniel Suchy <danny@danysek.cz>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoblock: drop unused includes in <linux/genhd.h>
Christoph Hellwig [Mon, 20 Sep 2021 12:33:25 +0000 (14:33 +0200)]
block: drop unused includes in <linux/genhd.h>

commit b81e0c2372e65e5627864ba034433b64b2fc73f5 upstream.

Drop various include not actually used in genhd.h itself, and
move the remaning includes closer together.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>a
Reported-by: "H. Nikolaus Schaller" <hns@goldelico.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: "Maciej W. Rozycki" <macro@orcam.me.uk>
[ resolves MIPS build failure by luck, root cause needs to be fixed in
  Linus's tree properly, but this is needed for now to fix the build - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoriscv: dts: k210: fix broken IRQs on hart1
Niklas Cassel [Tue, 1 Mar 2022 00:44:18 +0000 (00:44 +0000)]
riscv: dts: k210: fix broken IRQs on hart1

commit 74583f1b92cb3bbba1a3741cea237545c56f506c upstream.

Commit 67d96729a9e7 ("riscv: Update Canaan Kendryte K210 device tree")
incorrectly removed two entries from the PLIC interrupt-controller node's
interrupts-extended property.

The PLIC driver cannot know the mapping between hart contexts and hart ids,
so this information has to be provided by device tree, as specified by the
PLIC device tree binding.

The PLIC driver uses the interrupts-extended property, and initializes the
hart context registers in the exact same order as provided by the
interrupts-extended property.

In other words, if we don't specify the S-mode interrupts, the PLIC driver
will simply initialize the hart0 S-mode hart context with the hart1 M-mode
configuration. It is therefore essential to specify the S-mode IRQs even
though the system itself will only ever be running in M-mode.

Re-add the S-mode interrupts, so that we get working IRQs on hart1 again.

Cc: <stable@vger.kernel.org>
Fixes: 67d96729a9e7 ("riscv: Update Canaan Kendryte K210 device tree")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agodrm/i915: Workaround broken BIOS DBUF configuration on TGL/RKL
Ville Syrjälä [Fri, 4 Feb 2022 14:18:18 +0000 (16:18 +0200)]
drm/i915: Workaround broken BIOS DBUF configuration on TGL/RKL

commit 4e6f55120c7eccf6f9323bb681632e23cbcb3f3c upstream.

On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.

We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.

And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.

Cc: <stable@vger.kernel.org> # v5.14+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4762
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 15512021eb3975a8c2366e3883337e252bb0eee5)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agobtrfs: make send work with concurrent block group relocation
Filipe Manana [Mon, 22 Nov 2021 12:03:38 +0000 (12:03 +0000)]
btrfs: make send work with concurrent block group relocation

commit d96b34248c2f4ea8cd09286090f2f6f77102eaab upstream.

We don't allow send and balance/relocation to run in parallel in order
to prevent send failing or silently producing some bad stream. This is
because while send is using an extent (specially metadata) or about to
read a metadata extent and expecting it belongs to a specific parent
node, relocation can run, the transaction used for the relocation is
committed and the extent gets reallocated while send is still using the
extent, so it ends up with a different content than expected. This can
result in just failing to read a metadata extent due to failure of the
validation checks (parent transid, level, etc), failure to find a
backreference for a data extent, and other unexpected failures. Besides
reallocation, there's also a similar problem of an extent getting
discarded when it's unpinned after the transaction used for block group
relocation is committed.

The restriction between balance and send was added in commit 9e967495e0e0
("Btrfs: prevent send failures and crashes due to concurrent relocation"),
kernel 5.3, while the more general restriction between send and relocation
was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs
while we have send operations running"), kernel 5.14.

Both send and relocation can be very long running operations. Relocation
because it has to do a lot of IO and expensive backreference lookups in
case there are many snapshots, and send due to read IO when operating on
very large trees. This makes it inconvenient for users and tools to deal
with scheduling both operations.

For zoned filesystem we also have automatic block group relocation, so
send can fail with -EAGAIN when users least expect it or send can end up
delaying the block group relocation for too long. In the future we might
also get the automatic block group relocation for non zoned filesystems.

This change makes it possible for send and relocation to run in parallel.
This is achieved the following way:

1) For all tree searches, send acquires a read lock on the commit root
   semaphore;

2) After each tree search, and before releasing the commit root semaphore,
   the leaf is cloned and placed in the search path (struct btrfs_path);

3) After releasing the commit root semaphore, the changed_cb() callback
   is invoked, which operates on the leaf and writes commands to the pipe
   (or file in case send/receive is not used with a pipe). It's important
   here to not hold a lock on the commit root semaphore, because if we did
   we could deadlock when sending and receiving to the same filesystem
   using a pipe - the send task blocks on the pipe because it's full, the
   receive task, which is the only consumer of the pipe, triggers a
   transaction commit when attempting to create a subvolume or reserve
   space for a write operation for example, but the transaction commit
   blocks trying to write lock the commit root semaphore, resulting in a
   deadlock;

4) Before moving to the next key, or advancing to the next change in case
   of an incremental send, check if a transaction used for relocation was
   committed (or is about to finish its commit). If so, release the search
   path(s) and restart the search, to where we were before, so that we
   don't operate on stale extent buffers. The search restarts are always
   possible because both the send and parent roots are RO, and no one can
   add, remove of update keys (change their offset) in RO trees - the
   only exception is deduplication, but that is still not allowed to run
   in parallel with send;

5) Periodically check if there is contention on the commit root semaphore,
   which means there is a transaction commit trying to write lock it, and
   release the semaphore and reschedule if there is contention, so as to
   avoid causing any significant delays to transaction commits.

This leaves some room for optimizations for send to have less path
releases and re searching the trees when there's relocation running, but
for now it's kept simple as it performs quite well (on very large trees
with resulting send streams in the order of a few hundred gigabytes).

Test case btrfs/187, from fstests, stresses relocation, send and
deduplication attempting to run in parallel, but without verifying if send
succeeds and if it produces correct streams. A new test case will be added
that exercises relocation happening in parallel with send and then checks
that send succeeds and the resulting streams are correct.

A final note is that for now this still leaves the mutual exclusion
between send operations and deduplication on files belonging to a root
used by send operations. A solution for that will be slightly more complex
but it will eventually be built on top of this change.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agodrm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP
Thomas Zimmermann [Thu, 3 Feb 2022 09:39:22 +0000 (10:39 +0100)]
drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP

commit 3755d35ee1d2454b20b8a1e20d790e56201678a4 upstream.

As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select
the option to fix the build failure. The error message is shown
below.

  arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function
    `panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to
    `drm_panel_dp_aux_backlight'
  make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1

The issue has been reported before, when DisplayPort helpers were
hidden behind the option CONFIG_DRM_KMS_HELPER. [2]

v2:
* fix and expand commit description (Arnd)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 9d6366e743f3 ("drm: fb_helper: improve CONFIG_FB dependency")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/
Link: https://lore.kernel.org/all/20211117062704.14671-1-rdunlap@infradead.org/
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220203093922.20754-1-tzimmermann@suse.de
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agox86/traps: Mark do_int3() NOKPROBE_SYMBOL
Li Huafei [Thu, 10 Mar 2022 12:09:15 +0000 (20:09 +0800)]
x86/traps: Mark do_int3() NOKPROBE_SYMBOL

commit a365a65f9ca1ceb9cf1ac29db4a4f51df7c507ad upstream.

Since kprobe_int3_handler() is called in do_int3(), probing do_int3()
can cause a breakpoint recursion and crash the kernel. Therefore,
do_int3() should be marked as NOKPROBE_SYMBOL.

Fixes: 21e28290b317 ("x86/traps: Split int3 handler up")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220310120915.63349-1-lihuafei1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agox86/sgx: Free backing memory after faulting the enclave page
Jarkko Sakkinen [Thu, 3 Mar 2022 22:38:58 +0000 (00:38 +0200)]
x86/sgx: Free backing memory after faulting the enclave page

commit 08999b2489b4c9b939d7483dbd03702ee4576d96 upstream.

There is a limited amount of SGX memory (EPC) on each system.  When that
memory is used up, SGX has its own swapping mechanism which is similar
in concept but totally separate from the core mm/* code.  Instead of
swapping to disk, SGX swaps from EPC to normal RAM.  That normal RAM
comes from a shared memory pseudo-file and can itself be swapped by the
core mm code.  There is a hierarchy like this:

EPC <-> shmem <-> disk

After data is swapped back in from shmem to EPC, the shmem backing
storage needs to be freed.  Currently, the backing shmem is not freed.
This effectively wastes the shmem while the enclave is running.  The
memory is recovered when the enclave is destroyed and the backing
storage freed.

Sort this out by freeing memory with shmem_truncate_range(), as soon as
a page is faulted back to the EPC.  In addition, free the memory for
PCMD pages as soon as all PCMD's in a page have been marked as unused
by zeroing its contents.

Cc: stable@vger.kernel.org
Fixes: 1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220303223859.273187-1-jarkko@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agox86/boot: Add setup_indirect support in early_memremap_is_setup_data()
Ross Philipson [Thu, 24 Feb 2022 02:07:36 +0000 (21:07 -0500)]
x86/boot: Add setup_indirect support in early_memremap_is_setup_data()

commit 445c1470b6ef96440e7cfc42dfc160f5004fd149 upstream.

The x86 boot documentation describes the setup_indirect structures and
how they are used. Only one of the two functions in ioremap.c that needed
to be modified to be aware of the introduction of setup_indirect
functionality was updated. Adds comparable support to the other function
where it was missing.

Fixes: b3c72fc9a78e ("x86/boot: Introduce setup_indirect")
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1645668456-22036-3-git-send-email-ross.philipson@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agox86/boot: Fix memremap of setup_indirect structures
Ross Philipson [Thu, 24 Feb 2022 02:07:35 +0000 (21:07 -0500)]
x86/boot: Fix memremap of setup_indirect structures

commit 7228918b34615ef6317edcd9a058a057bc54aa32 upstream.

As documented, the setup_indirect structure is nested inside
the setup_data structures in the setup_data list. The code currently
accesses the fields inside the setup_indirect structure but only
the sizeof(struct setup_data) is being memremapped. No crash
occurred but this is just due to how the area is remapped under the
covers.

Properly memremap both the setup_data and setup_indirect structures
in these cases before accessing them.

Fixes: b3c72fc9a78e ("x86/boot: Introduce setup_indirect")
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1645668456-22036-2-git-send-email-ross.philipson@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agowatch_queue: Make comment about setting ->defunct more accurate
David Howells [Fri, 11 Mar 2022 13:24:47 +0000 (13:24 +0000)]
watch_queue: Make comment about setting ->defunct more accurate

commit 4edc0760412b0c4ecefc7e02cb855b310b122825 upstream.

watch_queue_clear() has a comment stating that setting ->defunct to true
preventing new additions as well as preventing notifications.  Whilst
the latter is true, the first bit is superfluous since at the time this
function is called, the pipe cannot be accessed to add new event
sources.

Remove the "new additions" bit from the comment.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agowatch_queue: Fix lack of barrier/sync/lock between post and read
David Howells [Fri, 11 Mar 2022 13:24:36 +0000 (13:24 +0000)]
watch_queue: Fix lack of barrier/sync/lock between post and read

commit 2ed147f015af2b48f41c6f0b6746aa9ea85c19f3 upstream.

There's nothing to synchronise post_one_notification() versus
pipe_read().  Whilst posting is done under pipe->rd_wait.lock, the
reader only takes pipe->mutex which cannot bar notification posting as
that may need to be made from contexts that cannot sleep.

Fix this by setting pipe->head with a barrier in post_one_notification()
and reading pipe->head with a barrier in pipe_read().

If that's not sufficient, the rd_wait.lock will need to be taken,
possibly in a ->confirm() op so that it only applies to notifications.
The lock would, however, have to be dropped before copy_page_to_iter()
is invoked.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agowatch_queue: Free the alloc bitmap when the watch_queue is torn down
David Howells [Fri, 11 Mar 2022 13:24:29 +0000 (13:24 +0000)]
watch_queue: Free the alloc bitmap when the watch_queue is torn down

commit 7ea1a0124b6da246b5bc8c66cddaafd36acf3ecb upstream.

Free the watch_queue note allocation bitmap when the watch_queue is
destroyed.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agowatch_queue: Fix the alloc bitmap size to reflect notes allocated
David Howells [Fri, 11 Mar 2022 13:24:22 +0000 (13:24 +0000)]
watch_queue: Fix the alloc bitmap size to reflect notes allocated

commit 3b4c0371928c17af03e8397ac842346624017ce6 upstream.

Currently, watch_queue_set_size() sets the number of notes available in
wqueue->nr_notes according to the number of notes allocated, but sets
the size of the bitmap to the unrounded number of notes originally asked
for.

Fix this by setting the bitmap size to the number of notes we're
actually going to make available (ie. the number allocated).

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agowatch_queue: Fix to always request a pow-of-2 pipe ring size
David Howells [Fri, 11 Mar 2022 13:24:08 +0000 (13:24 +0000)]
watch_queue: Fix to always request a pow-of-2 pipe ring size

commit 96a4d8912b28451cd62825fd7caa0e66e091d938 upstream.

The pipe ring size must always be a power of 2 as the head and tail
pointers are masked off by AND'ing with the size of the ring - 1.
watch_queue_set_size(), however, lets you specify any number of notes
between 1 and 511.  This number is passed through to pipe_resize_ring()
without checking/forcing its alignment.

Fix this by rounding the number of slots required up to the nearest
power of two.  The request is meant to guarantee that at least that many
notifications can be generated before the queue is full, so rounding
down isn't an option, but, alternatively, it may be better to give an
error if we aren't allowed to allocate that much ring space.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agowatch_queue: Fix to release page in ->release()
David Howells [Fri, 11 Mar 2022 13:23:46 +0000 (13:23 +0000)]
watch_queue: Fix to release page in ->release()

commit c1853fbadcba1497f4907971e7107888e0714c81 upstream.

When a pipe ring descriptor points to a notification message, the
refcount on the backing page is incremented by the generic get function,
but the release function, which marks the bitmap, doesn't drop the page
ref.

Fix this by calling generic_pipe_buf_release() at the end of
watch_queue_pipe_buf_release().

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agowatch_queue, pipe: Free watchqueue state after clearing pipe ring
David Howells [Fri, 11 Mar 2022 13:23:38 +0000 (13:23 +0000)]
watch_queue, pipe: Free watchqueue state after clearing pipe ring

commit db8facfc9fafacefe8a835416a6b77c838088f8b upstream.

In free_pipe_info(), free the watchqueue state after clearing the pipe
ring as each pipe ring descriptor has a release function, and in the
case of a notification message, this is watch_queue_pipe_buf_release()
which tries to mark the allocation bitmap that was previously released.

Fix this by moving the put of the pipe's ref on the watch queue to after
the ring has been cleared.  We still need to call watch_queue_clear()
before doing that to make sure that the pipe is disconnected from any
notification sources first.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agowatch_queue: Fix filter limit check
David Howells [Fri, 11 Mar 2022 13:23:31 +0000 (13:23 +0000)]
watch_queue: Fix filter limit check

commit c993ee0f9f81caf5767a50d1faeba39a0dc82af2 upstream.

In watch_queue_set_filter(), there are a couple of places where we check
that the filter type value does not exceed what the type_filter bitmap
can hold.  One place calculates the number of bits by:

   if (tf[i].type >= sizeof(wfilter->type_filter) * 8)

which is fine, but the second does:

   if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG)

which is not.  This can lead to a couple of out-of-bounds writes due to
a too-large type:

 (1) __set_bit() on wfilter->type_filter
 (2) Writing more elements in wfilter->filters[] than we allocated.

Fix this by just using the proper WATCH_TYPE__NR instead, which is the
number of types we actually know about.

The bug may cause an oops looking something like:

  BUG: KASAN: slab-out-of-bounds in watch_queue_set_filter+0x659/0x740
  Write of size 4 at addr ffff88800d2c66bc by task watch_queue_oob/611
  ...
  Call Trace:
   <TASK>
   dump_stack_lvl+0x45/0x59
   print_address_description.constprop.0+0x1f/0x150
   ...
   kasan_report.cold+0x7f/0x11b
   ...
   watch_queue_set_filter+0x659/0x740
   ...
   __x64_sys_ioctl+0x127/0x190
   do_syscall_64+0x43/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae

  Allocated by task 611:
   kasan_save_stack+0x1e/0x40
   __kasan_kmalloc+0x81/0xa0
   watch_queue_set_filter+0x23a/0x740
   __x64_sys_ioctl+0x127/0x190
   do_syscall_64+0x43/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae

  The buggy address belongs to the object at ffff88800d2c66a0
   which belongs to the cache kmalloc-32 of size 32
  The buggy address is located 28 bytes inside of
   32-byte region [ffff88800d2c66a0ffff88800d2c66c0)

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoARM: fix Thumb2 regression with Spectre BHB
Russell King (Oracle) [Fri, 11 Mar 2022 17:13:17 +0000 (17:13 +0000)]
ARM: fix Thumb2 regression with Spectre BHB

commit 6c7cb60bff7aec24b834343ff433125f469886a3 upstream.

When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agonet/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
Dima Chumak [Mon, 17 Jan 2022 13:32:16 +0000 (15:32 +0200)]
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE

commit 39bab83b119faac4bf7f07173a42ed35be95147e upstream.

Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.

Fixes: d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agovirtio: acknowledge all features before access
Michael S. Tsirkin [Fri, 14 Jan 2022 19:58:41 +0000 (14:58 -0500)]
virtio: acknowledge all features before access

commit 4fa59ede95195f267101a1b8916992cf3f245cdb upstream.

The feature negotiation was designed in a way that
makes it possible for devices to know which config
fields will be accessed by drivers.

This is broken since commit 404123c2db79 ("virtio: allow drivers to
validate features") with fallout in at least block and net.  We have a
partial work-around in commit 2f9a174f918e ("virtio: write back
F_VERSION_1 before validate") which at least lets devices find out which
format should config space have, but this is a partial fix: guests
should not access config space without acknowledging features since
otherwise we'll never be able to change the config space format.

To fix, split finalize_features from virtio_finalize_features and
call finalize_features with all feature bits before validation,
and then - if validation changed any bits - once again after.

Since virtio_finalize_features no longer writes out features
rename it to virtio_features_ok - since that is what it does:
checks that features are ok with the device.

As a side effect, this also reduces the amount of hypervisor accesses -
we now only acknowledge features once unless we are clearing any
features when validating (which is uncommon).

IRC I think that this was more or less always the intent in the spec but
unfortunately the way the spec is worded does not say this explicitly, I
plan to address this at the spec level, too.

Acked-by: Jason Wang <jasowang@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 404123c2db79 ("virtio: allow drivers to validate features")
Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate")
Cc: "Halil Pasic" <pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agovirtio: unexport virtio_finalize_features
Michael S. Tsirkin [Fri, 14 Jan 2022 19:56:15 +0000 (14:56 -0500)]
virtio: unexport virtio_finalize_features

commit 838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream.

virtio_finalize_features is only used internally within virtio.
No reason to export it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoKVM: x86/mmu: kvm_faultin_pfn has to return false if pfh is returned
Andrei Vagin [Fri, 15 Oct 2021 16:32:21 +0000 (09:32 -0700)]
KVM: x86/mmu: kvm_faultin_pfn has to return false if pfh is returned

commit a7cc099f2ec3117678adeb69749bef7e9dde3148 upstream.

This looks like a typo in 8f32d5e563cb. This change didn't intend to do
any functional changes.

The problem was caught by gVisor tests.

Fixes: 8f32d5e563cb ("KVM: x86/mmu: allow kvm_faultin_pfn to return page fault handling code")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Message-Id: <20211015163221.472508-1-avagin@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoswiotlb: rework "fix info leak with DMA_FROM_DEVICE"
Halil Pasic [Sat, 5 Mar 2022 17:07:14 +0000 (18:07 +0100)]
swiotlb: rework "fix info leak with DMA_FROM_DEVICE"

commit aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13 upstream.

Unfortunately, we ended up merging an old version of the patch "fix info
leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph
(the swiotlb maintainer), he asked me to create an incremental fix
(after I have pointed this out the mix up, and asked him for guidance).
So here we go.

The main differences between what we got and what was agreed are:
* swiotlb_sync_single_for_device is also required to do an extra bounce
* We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters
* The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE
  must take precedence over DMA_ATTR_SKIP_CPU_SYNC

Thus this patch removes DMA_ATTR_OVERWRITE, and makes
swiotlb_sync_single_for_device() bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer.

Let me note, that if the size used with dma_sync_* API is less than the
size used with dma_[un]map_*, under certain circumstances we may still
end up with swiotlb not being transparent. In that sense, this is no
perfect fix either.

To get this bullet proof, we would have to bounce the entire
mapping/bounce buffer. For that we would have to figure out the starting
address, and the size of the mapping in
swiotlb_sync_single_for_device(). While this does seem possible, there
seems to be no firm consensus on how things are supposed to work.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: ddbd89deb7d3 ("swiotlb: fix info leak with DMA_FROM_DEVICE")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoarm64: kasan: fix include error in MTE functions
Paul Semel [Tue, 8 Mar 2022 09:30:58 +0000 (10:30 +0100)]
arm64: kasan: fix include error in MTE functions

commit b859ebedd1e730bbda69142fca87af4e712649a1 upstream.

Fix `error: expected string literal in 'asm'`.
This happens when compiling an ebpf object file that includes
`net/net_namespace.h` from linux kernel headers.

Include trace:
     include/net/net_namespace.h:10
     include/linux/workqueue.h:9
     include/linux/timer.h:8
     include/linux/debugobjects.h:6
     include/linux/spinlock.h:90
     include/linux/workqueue.h:9
     arch/arm64/include/asm/spinlock.h:9
     arch/arm64/include/generated/asm/qrwlock.h:1
     include/asm-generic/qrwlock.h:14
     arch/arm64/include/asm/processor.h:33
     arch/arm64/include/asm/kasan.h:9
     arch/arm64/include/asm/mte-kasan.h:45
     arch/arm64/include/asm/mte-def.h:14

Signed-off-by: Paul Semel <paul.semel@datadoghq.com>
Fixes: 2cb34276427a ("arm64: kasan: simplify and inline MTE functions")
Cc: <stable@vger.kernel.org> # 5.12.x
Link: https://lore.kernel.org/r/bacb5387-2992-97e4-0c48-1ed925905bee@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>